diff options
| -rw-r--r-- | README | 5 | ||||
| -rw-r--r-- | drivers/ddr/fsl/ctrl_regs.c | 1 | ||||
| -rw-r--r-- | drivers/ddr/fsl/main.c | 1 | ||||
| -rw-r--r-- | drivers/ddr/fsl/options.c | 17 | ||||
| -rw-r--r-- | drivers/ddr/fsl/util.c | 3 | ||||
| -rw-r--r-- | include/fsl_ddr_sdram.h | 1 |
6 files changed, 26 insertions, 2 deletions
@@ -497,6 +497,11 @@ The following options need to be configured: same as CONFIG_SYS_DDR_SDRAM_BASE for all Power SoCs. But it could be different for ARM SoCs. + CONFIG_SYS_FSL_DDR_INTLV_256B + DDR controller interleaving on 256-byte. This is a special + interleaving mode, handled by Dickens for Freescale layerscape + SoCs with ARM core. + - Intel Monahans options: CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index 5acbc73..0882932 100644 --- a/drivers/ddr/fsl/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -145,6 +145,7 @@ static void set_csn_config(int dimm_number, int i, fsl_ddr_cfg_regs_t *ddr, if (!popts->memctl_interleaving) break; switch (popts->memctl_interleaving_mode) { + case FSL_DDR_256B_INTERLEAVING: case FSL_DDR_CACHE_LINE_INTERLEAVING: case FSL_DDR_PAGE_INTERLEAVING: case FSL_DDR_BANK_INTERLEAVING: diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index dee50a0..d62ca63 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -291,6 +291,7 @@ static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo, for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { if (pinfo->memctl_opts[i].memctl_interleaving) { switch (pinfo->memctl_opts[i].memctl_interleaving_mode) { + case FSL_DDR_256B_INTERLEAVING: case FSL_DDR_CACHE_LINE_INTERLEAVING: case FSL_DDR_PAGE_INTERLEAVING: case FSL_DDR_BANK_INTERLEAVING: diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c index 4aafcce..b0cf046 100644 --- a/drivers/ddr/fsl/options.c +++ b/drivers/ddr/fsl/options.c @@ -818,21 +818,33 @@ unsigned int populate_memctl_options(int all_dimms_registered, * If memory controller interleaving is enabled, then the data * bus widths must be programmed identically for all memory controllers. * - * XXX: Attempt to set all controllers to the same chip select + * Attempt to set all controllers to the same chip select * interleaving mode. It will do a best effort to get the * requested ranks interleaved together such that the result * should be a subset of the requested configuration. + * + * if CONFIG_SYS_FSL_DDR_INTLV_256B is defined, mandatory interleaving + * with 256 Byte is enabled. */ #if (CONFIG_NUM_DDR_CONTROLLERS > 1) if (!hwconfig_sub_f("fsl_ddr", "ctlr_intlv", buf)) +#ifdef CONFIG_SYS_FSL_DDR_INTLV_256B + ; +#else goto done; - +#endif if (pdimm[0].n_ranks == 0) { printf("There is no rank on CS0 for controller %d.\n", ctrl_num); popts->memctl_interleaving = 0; goto done; } popts->memctl_interleaving = 1; +#ifdef CONFIG_SYS_FSL_DDR_INTLV_256B + popts->memctl_interleaving_mode = FSL_DDR_256B_INTERLEAVING; + popts->memctl_interleaving = 1; + debug("256 Byte interleaving\n"); + goto done; +#endif /* * test null first. if CONFIG_HWCONFIG is not defined * hwconfig_arg_cmp returns non-zero @@ -1085,6 +1097,7 @@ void check_interleaving_options(fsl_ddr_info_t *pinfo) "Memory controller interleaving disabled.\n"); } else { switch (check_intlv) { + case FSL_DDR_256B_INTERLEAVING: case FSL_DDR_CACHE_LINE_INTERLEAVING: case FSL_DDR_PAGE_INTERLEAVING: case FSL_DDR_BANK_INTERLEAVING: diff --git a/drivers/ddr/fsl/util.c b/drivers/ddr/fsl/util.c index 450a488..ad53658 100644 --- a/drivers/ddr/fsl/util.c +++ b/drivers/ddr/fsl/util.c @@ -228,6 +228,9 @@ void board_add_ram_info(int use_default) puts(" DDR Controller Interleaving Mode: "); switch ((cs0_config >> 24) & 0xf) { + case FSL_DDR_256B_INTERLEAVING: + puts("256B"); + break; case FSL_DDR_CACHE_LINE_INTERLEAVING: puts("cache line"); break; diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h index 16cccc7..2a36431 100644 --- a/include/fsl_ddr_sdram.h +++ b/include/fsl_ddr_sdram.h @@ -76,6 +76,7 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; #define FSL_DDR_PAGE_INTERLEAVING 0x1 #define FSL_DDR_BANK_INTERLEAVING 0x2 #define FSL_DDR_SUPERBANK_INTERLEAVING 0x3 +#define FSL_DDR_256B_INTERLEAVING 0x8 #define FSL_DDR_3WAY_1KB_INTERLEAVING 0xA #define FSL_DDR_3WAY_4KB_INTERLEAVING 0xC #define FSL_DDR_3WAY_8KB_INTERLEAVING 0xD |