summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/cpu/armv7/lowlevel_init.S8
-rw-r--r--arch/arm/cpu/armv7/omap-common/boot-common.c31
-rw-r--r--arch/arm/cpu/armv7/omap-common/lowlevel_init.S50
-rw-r--r--arch/arm/include/asm/arch-omap4/sys_proto.h11
-rw-r--r--arch/arm/include/asm/arch-omap5/sys_proto.h12
-rw-r--r--arch/arm/include/asm/omap_common.h3
-rw-r--r--common/spl/spl.c10
-rw-r--r--include/configs/am335x_evm.h1
-rw-r--r--include/configs/igep0033.h1
-rw-r--r--include/configs/pcm051.h1
-rw-r--r--include/configs/ti814x_evm.h1
-rw-r--r--include/spl.h1
12 files changed, 39 insertions, 91 deletions
diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S
index 0d45528..0a15aa4 100644
--- a/arch/arm/cpu/armv7/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/lowlevel_init.S
@@ -37,7 +37,13 @@ ENTRY(lowlevel_init)
*/
ldr sp, =CONFIG_SYS_INIT_SP_ADDR
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
-
+#ifdef CONFIG_SPL_BUILD
+ ldr r8, =gdata
+#else
+ sub sp, #GD_SIZE
+ bic sp, sp, #7
+ mov r8, sp
+#endif
/*
* Save the old lr(passed in ip) and the current lr to stack
*/
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 24cbe2d..bff7e9c 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -23,31 +23,17 @@
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
-/*
- * This is used to verify if the configuration header
- * was executed by rom code prior to control of transfer
- * to the bootloader. SPL is responsible for saving and
- * passing the boot_params pointer to the u-boot.
- */
-struct omap_boot_parameters boot_params __attribute__ ((section(".data")));
+DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPL_BUILD
-/*
- * We use static variables because global data is not ready yet.
- * Initialized data is available in SPL right from the beginning.
- * We would not typically need to save these parameters in regular
- * U-Boot. This is needed only in SPL at the moment.
- */
-u32 omap_bootmode = MMCSD_MODE_FAT;
-
u32 spl_boot_device(void)
{
- return (u32) (boot_params.omap_bootdevice);
+ return (u32) (gd->arch.omap_boot_params.omap_bootdevice);
}
u32 spl_boot_mode(void)
{
- return omap_bootmode;
+ return gd->arch.omap_boot_params.omap_bootmode;
}
void spl_board_init(void)
@@ -73,4 +59,15 @@ int board_mmc_init(bd_t *bis)
}
return 0;
}
+
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+ typedef void __noreturn (*image_entry_noargs_t)(u32 *);
+ image_entry_noargs_t image_entry =
+ (image_entry_noargs_t) spl_image->entry_point;
+
+ debug("image entry point: 0x%X\n", spl_image->entry_point);
+ /* Pass the saved boot_params from rom code */
+ image_entry((u32 *)&gd->arch.omap_boot_params);
+}
#endif
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 90b3c8a..c489536 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -28,59 +28,13 @@
#include <config.h>
#include <asm/arch/omap.h>
+#include <asm/omap_common.h>
#include <asm/arch/spl.h>
#include <linux/linkage.h>
ENTRY(save_boot_params)
- /*
- * See if the rom code passed pointer is valid:
- * It is not valid if it is not in non-secure SRAM
- * This may happen if you are booting with the help of
- * debugger
- */
- ldr r2, =NON_SECURE_SRAM_START
- cmp r2, r0
- bgt 1f
- ldr r2, =NON_SECURE_SRAM_END
- cmp r2, r0
- blt 1f
-
- /*
- * store the boot params passed from rom code or saved
- * and passed by SPL
- */
- cmp r0, #0
- beq 1f
- ldr r1, =boot_params
+ ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS
str r0, [r1]
-#ifdef CONFIG_SPL_BUILD
- /* Store the boot device in spl_boot_device */
- ldrb r2, [r0, #BOOT_DEVICE_OFFSET] @ r1 <- value of boot device
- and r2, #BOOT_DEVICE_MASK
- ldr r3, =boot_params
- strb r2, [r3, #BOOT_DEVICE_OFFSET] @ spl_boot_device <- r1
-
- /*
- * boot mode is only valid for device that can be raw or FAT booted.
- * in other cases it may be fatal to look. While platforms differ
- * in the values used for each MMC slot, they are contiguous.
- */
- cmp r2, #MMC_BOOT_DEVICES_START
- blt 2f
- cmp r2, #MMC_BOOT_DEVICES_END
- bgt 2f
- /* Store the boot mode (raw/FAT) in omap_bootmode */
- ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr
- ldr r2, [r2, #DEV_DATA_PTR_OFFSET] @ get the pDeviceData ptr
- ldr r2, [r2, #BOOT_MODE_OFFSET] @ get the boot mode
- ldr r3, =omap_bootmode
- str r2, [r3]
-#endif
-2:
- ldrb r2, [r0, #CH_FLAGS_OFFSET]
- ldr r3, =boot_params
- strb r2, [r3, #CH_FLAGS_OFFSET]
-1:
bx lr
ENDPROC(save_boot_params)
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index ac9c1f8..039a1f2 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -27,6 +27,8 @@
#include <asm/omap_common.h>
#include <asm/arch/mux_omap4.h>
+DECLARE_GLOBAL_DATA_PTR;
+
struct omap_sysinfo {
char *board_string;
};
@@ -59,13 +61,6 @@ int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
u32 warm_reset(void);
void force_emif_self_refresh(void);
void setup_warmreset_time(void);
-/*
- * This is used to verify if the configuration header
- * was executed by Romcode prior to control of transfer
- * to the bootloader. SPL is responsible for saving and
- * passing this to the u-boot.
- */
-extern struct omap_boot_parameters boot_params;
static inline u32 running_from_sdram(void)
{
@@ -85,7 +80,7 @@ static inline u8 uboot_loaded_by_spl(void)
* variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
* mandatory section if CH is present.
*/
- if ((boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
+ if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
return 0;
else
return running_from_sdram();
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index 393c8bf..b79161d 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -27,6 +27,8 @@
#include <asm/omap_common.h>
#include <asm/arch/clocks.h>
+DECLARE_GLOBAL_DATA_PTR;
+
struct pad_conf_entry {
u32 offset;
u32 val;
@@ -66,14 +68,6 @@ void get_ioregs(const struct ctrl_ioregs **regs);
void srcomp_enable(void);
void setup_warmreset_time(void);
-/*
- * This is used to verify if the configuration header
- * was executed by Romcode prior to control of transfer
- * to the bootloader. SPL is responsible for saving and
- * passing this to the u-boot.
- */
-extern struct omap_boot_parameters boot_params;
-
static inline u32 running_from_sdram(void)
{
u32 pc;
@@ -92,7 +86,7 @@ static inline u8 uboot_loaded_by_spl(void)
* variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
* mandatory section if CH is present.
*/
- if ((boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
+ if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
return 0;
else
return running_from_sdram();
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index eebc9c7..ee7b188 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -25,6 +25,8 @@
#ifndef _OMAP_COMMON_H_
#define _OMAP_COMMON_H_
+#ifndef __ASSEMBLY__
+
#include <common.h>
#define NUM_SYS_CLKS 8
@@ -558,6 +560,7 @@ static inline u32 omap_revision(void)
extern u32 *const omap_si_rev;
return *omap_si_rev;
}
+#endif
/*
* silicon revisions.
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 6715e0d..e6aa89b 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -125,17 +125,13 @@ void spl_parse_image_header(const struct image_header *header)
__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
- typedef void __noreturn (*image_entry_noargs_t)(u32 *);
+ typedef void __noreturn (*image_entry_noargs_t)(void);
+
image_entry_noargs_t image_entry =
(image_entry_noargs_t) spl_image->entry_point;
debug("image entry point: 0x%X\n", spl_image->entry_point);
- /* Pass the saved boot_params from rom code */
-#if defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU)
- image_entry = (image_entry_noargs_t)0x80100000;
-#endif
- u32 boot_params_ptr_addr = (u32)&boot_params_ptr;
- image_entry((u32 *)boot_params_ptr_addr);
+ image_entry();
}
#ifdef CONFIG_SPL_RAM_DEVICE
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 5739422..941054d 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -17,6 +17,7 @@
#define __CONFIG_AM335X_EVM_H
#define CONFIG_AM33XX
+#define CONFIG_OMAP
#include <asm/arch/omap.h>
diff --git a/include/configs/igep0033.h b/include/configs/igep0033.h
index 50eafdf..14063a8 100644
--- a/include/configs/igep0033.h
+++ b/include/configs/igep0033.h
@@ -15,6 +15,7 @@
#define __CONFIG_IGEP0033_H
#define CONFIG_AM33XX
+#define CONFIG_OMAP
#include <asm/arch/omap.h>
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index 2e3f08b..cc8d317 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -20,6 +20,7 @@
#define __CONFIG_PCM051_H
#define CONFIG_AM33XX
+#define CONFIG_OMAP
#include <asm/arch/omap.h>
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index e646bd7..6c423df 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -19,6 +19,7 @@
#define CONFIG_TI81XX
#define CONFIG_TI814X
#define CONFIG_SYS_NO_FLASH
+#define CONFIG_OMAP
#include <asm/arch/omap.h>
diff --git a/include/spl.h b/include/spl.h
index b40be80..4bc1dd1 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -44,7 +44,6 @@ struct spl_image_info {
#define SPL_COPY_PAYLOAD_ONLY 1
extern struct spl_image_info spl_image;
-extern u32 *boot_params_ptr;
/* SPL common functions */
void preloader_console_init(void);
generated by cgit v1.1 at 2024-11-22 14:27:06 +0000