diff options
| -rw-r--r-- | board/ep8248/ep8248.c | 12 | ||||
| -rw-r--r-- | include/configs/ep8248.h | 49 |
2 files changed, 29 insertions, 32 deletions
diff --git a/board/ep8248/ep8248.c b/board/ep8248/ep8248.c index bc20ba7..57d39aa 100644 --- a/board/ep8248/ep8248.c +++ b/board/ep8248/ep8248.c @@ -35,8 +35,8 @@ * according to the five values podr/pdir/ppar/psor/pdat for that entry */ -#define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1) -#define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2) +#define CONFIG_SYS_FCC1 (CONFIG_ETHER_ON_FCC1 == 1) +#define CONFIG_SYS_FCC2 (CONFIG_ETHER_ON_FCC2 == 1) const iop_conf_t iop_conf_tab[4][32] = { @@ -261,3 +261,11 @@ int checkboard(void) return 0; } + +#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup( blob, bd); +} +#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ + diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h index f7b3fde..cb4185a 100644 --- a/include/configs/ep8248.h +++ b/include/configs/ep8248.h @@ -50,50 +50,41 @@ #define CONFIG_SYS_BCSR 0xFA000000 -/* - * Select ethernet configuration - * - * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, - * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for - * SCC, 1-3 for FCC) - * - * If CONFIG_ETHER_NONE is defined, then either the ethernet routines - * must be defined elsewhere (as for the console), or CONFIG_CMD_NET - * must be unset. - */ +/* Pass open firmware flat device tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc/cpm/serial <at> 11a80" + +/* Select ethernet configuration */ #undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ #define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ #undef CONFIG_ETHER_NONE /* No external Ethernet */ -#ifdef CONFIG_ETHER_ON_FCC - -#define CONFIG_ETHER_INDEX 1 /* FCC1 is used for Ethernet */ - -#if (CONFIG_ETHER_INDEX == 1) +#define CONFIG_NET_MULTI +#define CONFIG_SYS_CPMFCR_RAMTYPE 0 +#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) +#define CONFIG_HAS_ETH0 +#define CONFIG_ETHER_ON_FCC1 1 /* - Rx clock is CLK10 * - Tx clock is CLK11 * - BDs/buffers on 60x bus * - Full duplex */ -#define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE (CMXFCR_RF1CS_CLK10 | CMXFCR_TF1CS_CLK11) -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) - -#elif (CONFIG_ETHER_INDEX == 2) +#define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK) +#define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK10 | CMXFCR_TF1CS_CLK11) +#define CONFIG_HAS_ETH1 +#define CONFIG_ETHER_ON_FCC2 1 /* - Rx clock is CLK13 * - Tx clock is CLK14 * - BDs/buffers on 60x bus * - Full duplex */ -#define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) - -#endif /* CONFIG_ETHER_INDEX */ +#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) +#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) #define CONFIG_MII /* MII PHY management */ #define CONFIG_BITBANGMII /* Bit-banged MDIO interface */ @@ -113,8 +104,6 @@ #define MIIDELAY udelay(1) -#endif /* CONFIG_ETHER_ON_FCC */ - #ifndef CONFIG_8260_CLKIN #define CONFIG_8260_CLKIN 66000000 /* in Hz */ #endif |