diff options
| -rw-r--r-- | board/freescale/mx6sxsabreauto/mx6sxsabreauto.c | 108 | ||||
| -rw-r--r-- | boards.cfg | 2 | ||||
| -rw-r--r-- | include/configs/mx6sxsabreauto.h | 4 | ||||
| -rw-r--r-- | include/configs/mx6sxsabreautoandroid.h | 56 |
4 files changed, 170 insertions, 0 deletions
diff --git a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c index 2419d60..dc3295a 100644 --- a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c +++ b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c @@ -34,6 +34,13 @@ #include <mxsfb.h> #endif +#ifdef CONFIG_FASTBOOT +#include <fastboot.h> +#ifdef CONFIG_ANDROID_RECOVERY +#include <recovery.h> +#endif +#endif /*CONFIG_FASTBOOT*/ + DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ @@ -884,3 +891,104 @@ int board_ehci_hcd_init(int port) return 0; } #endif + +#ifdef CONFIG_FASTBOOT + +void board_fastboot_setup(void) +{ + switch (get_boot_device()) { +#if defined(CONFIG_FASTBOOT_STORAGE_MMC) + case SD3_BOOT: + case MMC3_BOOT: + if (!getenv("fastboot_dev")) + setenv("fastboot_dev", "mmc0"); + if (!getenv("bootcmd")) + setenv("bootcmd", "booti mmc0"); + break; + case SD4_BOOT: + case MMC4_BOOT: + if (!getenv("fastboot_dev")) + setenv("fastboot_dev", "mmc1"); + if (!getenv("bootcmd")) + setenv("bootcmd", "booti mmc1"); + break; +#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/ +#if defined(CONFIG_FASTBOOT_STORAGE_NAND) + case NAND_BOOT: + if (!getenv("fastboot_dev")) + setenv("fastboot_dev", "nand"); + if (!getenv("fbparts")) + setenv("fbparts", + "16m@16m(boot) 16m@32m(recovery) 810m@48m(android_root)ubifs"); + if (!getenv("bootcmd")) + setenv("bootcmd", + "nand read ${loadaddr} ${boot_nand_offset} " + "${boot_nand_size};booti ${loadaddr}"); + break; +#endif /*CONFIG_FASTBOOT_STORAGE_NAND*/ + + default: + printf("unsupported boot devices\n"); + break; + } +} + +#ifdef CONFIG_ANDROID_RECOVERY +int check_recovery_cmd_file(void) +{ + int recovery_mode = 0; + + recovery_mode = recovery_check_and_clean_flag(); + + return recovery_mode; +} + +void board_recovery_setup(void) +{ + int bootdev = get_boot_device(); + + switch (bootdev) { +#if defined(CONFIG_FASTBOOT_STORAGE_MMC) + case SD3_BOOT: + case MMC3_BOOT: + if (!getenv("bootcmd_android_recovery")) + setenv("bootcmd_android_recovery", "booti mmc0 recovery"); + break; + case SD4_BOOT: + case MMC4_BOOT: + if (!getenv("bootcmd_android_recovery")) + setenv("bootcmd_android_recovery", "booti mmc1 recovery"); + break; +#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/ +#if defined(CONFIG_FASTBOOT_STORAGE_NAND) + case NAND_BOOT: + if (!getenv("bootcmd_android_recovery")) + setenv("bootcmd_android_recovery", + "nand read ${loadaddr} ${recovery_nand_offset} " + "${recovery_nand_size};booti ${loadaddr}"); + break; +#endif /*CONFIG_FASTBOOT_STORAGE_NAND*/ + default: + printf("Unsupported bootup device for recovery: dev: %d\n", + bootdev); + return; + } + + printf("setup env for recovery..\n"); + setenv("bootcmd", "run bootcmd_android_recovery"); +} +#endif /*CONFIG_ANDROID_RECOVERY*/ + +#endif /*CONFIG_FASTBOOT*/ + +#ifdef CONFIG_IMX_UDC +iomux_v3_cfg_t const otg_udc_pads[] = { + (MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL)), +}; +void udc_pins_setting(void) +{ + imx_iomux_v3_setup_multiple_pads(otg_udc_pads, + ARRAY_SIZE(otg_udc_pads)); +} + +#endif /*CONFIG_IMX_UDC*/ @@ -371,6 +371,8 @@ Active arm armv7 mx6 freescale mx6sxsabresd Active arm armv7 mx6 freescale mx6sxsabreauto mx6sxsabreauto mx6sxsabreauto:IMX_CONFIG=board/freescale/mx6sxsabreauto/imximage.cfg,MX6SX Fabio Estevam <fabio.estevam@freescale.com> Active arm armv7 mx6 freescale mx6sxsabreauto mx6sxsabreauto_qspi1 mx6sxsabreauto:IMX_CONFIG=board/freescale/mx6sxsabreauto/imximage.cfg,MX6SX,SYS_BOOT_QSPI Fabio Estevam <fabio.estevam@freescale.com> Active arm armv7 mx6 freescale mx6sxsabreauto mx6sxsabreauto_nand mx6sxsabreauto:IMX_CONFIG=board/freescale/mx6sxsabreauto/imximage.cfg,MX6SX,SYS_BOOT_NAND Fabio Estevam <fabio.estevam@freescale.com> +Active arm armv7 mx6 freescale mx6sxsabreauto mx6sxsabreautoandroid mx6sxsabreauto:IMX_CONFIG=board/freescale/mx6sxsabreauto/imximage.cfg,MX6SX,ANDROID_SUPPORT Fabio Estevam <fabio.estevam@freescale.com> +Active arm armv7 mx6 freescale mx6sxsabreauto mx6sxsabreautoandroid_nand mx6sxsabreauto:IMX_CONFIG=board/freescale/mx6sxsabreauto/imximage.cfg,MX6SX,SYS_BOOT_NAND,ANDROID_SUPPORT Fabio Estevam <fabio.estevam@freescale.com> Active arm armv7 mx6 gateworks gw_ventana gwventanadl gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6DL,DDR_MB=512 Tim Harvey <tharvey@gateworks.com> Active arm armv7 mx6 gateworks gw_ventana gwventanadl1g gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6DL,DDR_MB=1024 Tim Harvey <tharvey@gateworks.com> Active arm armv7 mx6 gateworks gw_ventana gwventanaq gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6Q,DDR_MB=512 Tim Harvey <tharvey@gateworks.com> diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h index d4f1fc2..40043f8 100644 --- a/include/configs/mx6sxsabreauto.h +++ b/include/configs/mx6sxsabreauto.h @@ -384,4 +384,8 @@ #define CONFIG_MXC_USB_FLAGS 0 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#if defined(CONFIG_ANDROID_SUPPORT) +#include "mx6sxsabreautoandroid.h" +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/mx6sxsabreautoandroid.h b/include/configs/mx6sxsabreautoandroid.h new file mode 100644 index 0000000..ec1cc76 --- /dev/null +++ b/include/configs/mx6sxsabreautoandroid.h @@ -0,0 +1,56 @@ + +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MX6SX_SABREAUTO_ANDROID_H +#define __MX6SX_SABREAUTO_ANDROID_H + +#define CONFIG_SERIAL_TAG + +#define CONFIG_USB_DEVICE +#define CONFIG_IMX_UDC 1 + +#define CONFIG_FASTBOOT 1 +#define CONFIG_FASTBOOT_VENDOR_ID 0x18d1 +#define CONFIG_FASTBOOT_PRODUCT_ID 0x0d02 +#define CONFIG_FASTBOOT_BCD_DEVICE 0x311 +#define CONFIG_FASTBOOT_MANUFACTURER_STR "Freescale" +#define CONFIG_FASTBOOT_PRODUCT_NAME_STR "i.mx6sx SABRE-AUTO Board" +#define CONFIG_FASTBOOT_INTERFACE_STR "Android fastboot" +#define CONFIG_FASTBOOT_CONFIGURATION_STR "Android fastboot" +#define CONFIG_FASTBOOT_SERIAL_NUM "12345" +#define CONFIG_FASTBOOT_SATA_NO 0 + +#if defined CONFIG_SYS_BOOT_NAND +#define CONFIG_FASTBOOT_STORAGE_NAND +#else +#define CONFIG_FASTBOOT_STORAGE_MMC +#endif + +/* For system.img growing up more than 256MB, more buffer needs +* to receive the system.img*/ +#define CONFIG_FASTBOOT_TRANSFER_BUF 0x8c000000 +#define CONFIG_FASTBOOT_TRANSFER_BUF_SIZE 0x19000000 /* 400M byte */ + + +#define CONFIG_CMD_BOOTI +#define CONFIG_ANDROID_RECOVERY +/* which mmc bus is your main storage ? */ +#define CONFIG_ANDROID_MAIN_MMC_BUS 2 +#define CONFIG_ANDROID_BOOT_PARTITION_MMC 1 +#define CONFIG_ANDROID_SYSTEM_PARTITION_MMC 5 +#define CONFIG_ANDROID_RECOVERY_PARTITION_MMC 2 +#define CONFIG_ANDROID_CACHE_PARTITION_MMC 6 + +#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CONFIG_BOOTCOMMAND + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "splashpos=m,m\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + +#endif |