diff options
-rw-r--r-- | board/t3corp/chip_config.c | 16 | ||||
-rw-r--r-- | board/t3corp/init.S | 8 | ||||
-rw-r--r-- | board/t3corp/t3corp.c | 2 | ||||
-rw-r--r-- | include/configs/t3corp.h | 27 |
4 files changed, 34 insertions, 19 deletions
diff --git a/board/t3corp/chip_config.c b/board/t3corp/chip_config.c index c00bf16..98ab49f 100644 --- a/board/t3corp/chip_config.c +++ b/board/t3corp/chip_config.c @@ -27,13 +27,27 @@ struct ppc4xx_config ppc4xx_config_val[] = { { - "600", "CPU: 600 PLB: 200 OPB: 100 EBC: 100", + "600-67", "CPU: 600 PLB: 200 OPB: 67 EBC: 67", + { + 0x86, 0x80, 0xce, 0x1f, 0x7d, 0x80, 0x00, 0xe0, + 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + } + }, + { + "600-100", "CPU: 600 PLB: 200 OPB: 100 EBC: 100", { 0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0, 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 } }, { + "667", "CPU: 667 PLB: 166 OPB: 83 EBC: 83", + { + 0x06, 0x80, 0xbb, 0x14, 0x99, 0x82, 0x00, 0xa0, + 0x40, 0x88, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + } + }, + { "800", "CPU: 800 PLB: 200 OPB: 100 EBC: 100", { 0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0, diff --git a/board/t3corp/init.S b/board/t3corp/init.S index 4a4217f..ecd35ff 100644 --- a/board/t3corp/init.S +++ b/board/t3corp/init.S @@ -81,11 +81,13 @@ tlbtab: tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xc, AC_RW | SA_IG) /* TLB-entry for FPGA(s) */ - tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_1M, CONFIG_SYS_FPGA1_BASE, 4, + tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_16M, CONFIG_SYS_FPGA1_BASE, 4, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_1M, CONFIG_SYS_FPGA2_BASE, 4, + tlbentry(CONFIG_SYS_FPGA1_BASE + (16 << 20), SZ_16M, + CONFIG_SYS_FPGA1_BASE + (16 << 20), 4, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_16M, CONFIG_SYS_FPGA2_BASE, 4, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_1M, CONFIG_SYS_FPGA3_BASE, 4, + tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_16M, CONFIG_SYS_FPGA3_BASE, 4, AC_RW | SA_IG) /* TLB-entry for OCM */ diff --git a/board/t3corp/t3corp.c b/board/t3corp/t3corp.c index 8ffa321..ddf5897 100644 --- a/board/t3corp/t3corp.c +++ b/board/t3corp/t3corp.c @@ -45,7 +45,7 @@ int board_early_init_f(void) mtdcr(UIC1SR, 0xffffffff); /* clear all */ mtdcr(UIC1ER, 0x00000000); /* disable all */ mtdcr(UIC1CR, 0x00000000); /* all non-critical */ - mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC1PR, 0x7fffffff); /* per ref-board manual */ mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */ mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ mtdcr(UIC1SR, 0xffffffff); /* clear all */ diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h index 0ecc5b1..7b88601 100644 --- a/include/configs/t3corp.h +++ b/include/configs/t3corp.h @@ -74,8 +74,8 @@ #define CONFIG_SYS_FLASH_SIZE (64 << 20) #define CONFIG_SYS_FPGA1_BASE 0xe0000000 -#define CONFIG_SYS_FPGA2_BASE 0xe0100000 -#define CONFIG_SYS_FPGA3_BASE 0xe0200000 +#define CONFIG_SYS_FPGA2_BASE 0xe2000000 +#define CONFIG_SYS_FPGA3_BASE 0xe4000000 #define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000 /* EBC Boot Space */ #define CONFIG_SYS_FLASH_BASE_PHYS_H 0x4 @@ -84,14 +84,12 @@ (((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \ | (u64)CONFIG_SYS_FLASH_BASE_PHYS_L) -#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 64k */ +#define CONFIG_SYS_OCM_BASE 0xE7000000 /* OCM: 64k */ #define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */ #define CONFIG_SYS_LOCAL_CONF_REGS 0xEF000000 #define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 /* internal periph. */ -#define CONFIG_SYS_AHB_BASE 0xE2000000 /* int. AHB periph. */ - /* * Initial RAM & stack pointer (placed in OCM) */ @@ -121,6 +119,7 @@ #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ #define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD reset cmd */ +#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* use status poll method */ #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ @@ -144,10 +143,13 @@ /* * DDR2 SDRAM */ +#define CONFIG_SYS_MBYTES_SDRAM 256 +#define CONFIG_DDR_ECC #define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */ #define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */ #define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */ #undef CONFIG_PPC4xx_DDR_METHOD_A +#define CONFIG_DDR_RFDC_FIXED 0x000001D7 /* optimal value */ /* DDR1/2 SDRAM Device Control Register Data Values */ /* Memory Queue */ @@ -162,9 +164,6 @@ #define CONFIG_SYS_SDRAM_CONF1HB 0x80001C80 #define CONFIG_SYS_SDRAM_CONFPATHB 0x10a68000 -#define CONFIG_DDR_ECC -#define CONFIG_SYS_MBYTES_SDRAM 256 - #define CAS_LATENCY JEDEC_MA_MR_CL_DDR2_5_0_CLK /* DDR1/2 SDRAM Device Control Register Data Values */ @@ -417,7 +416,7 @@ #define CONFIG_SYS_EBC_PB1AP (EBC_BXAP_BME_DISABLED | \ EBC_BXAP_TWT_ENCODE(5) | \ EBC_BXAP_CSN_ENCODE(0) | \ - EBC_BXAP_OEN_ENCODE(4) | \ + EBC_BXAP_OEN_ENCODE(3) | \ EBC_BXAP_WBN_ENCODE(0) | \ EBC_BXAP_WBF_ENCODE(0) | \ EBC_BXAP_TH_ENCODE(1) | \ @@ -426,7 +425,7 @@ EBC_BXAP_BEM_RW | \ EBC_BXAP_PEN_DISABLED) #define CONFIG_SYS_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA1_BASE) | \ - EBC_BXCR_BS_1MB | \ + EBC_BXCR_BS_32MB | \ EBC_BXCR_BU_RW | \ EBC_BXCR_BW_32BIT) @@ -434,7 +433,7 @@ #define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_DISABLED | \ EBC_BXAP_TWT_ENCODE(5) | \ EBC_BXAP_CSN_ENCODE(0) | \ - EBC_BXAP_OEN_ENCODE(4) | \ + EBC_BXAP_OEN_ENCODE(3) | \ EBC_BXAP_WBN_ENCODE(0) | \ EBC_BXAP_WBF_ENCODE(0) | \ EBC_BXAP_TH_ENCODE(1) | \ @@ -443,7 +442,7 @@ EBC_BXAP_BEM_RW | \ EBC_BXAP_PEN_DISABLED) #define CONFIG_SYS_EBC_PB2CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA2_BASE) | \ - EBC_BXCR_BS_1MB | \ + EBC_BXCR_BS_16MB | \ EBC_BXCR_BU_RW | \ EBC_BXCR_BW_32BIT) @@ -451,7 +450,7 @@ #define CONFIG_SYS_EBC_PB3AP (EBC_BXAP_BME_DISABLED | \ EBC_BXAP_TWT_ENCODE(5) | \ EBC_BXAP_CSN_ENCODE(0) | \ - EBC_BXAP_OEN_ENCODE(4) | \ + EBC_BXAP_OEN_ENCODE(3) | \ EBC_BXAP_WBN_ENCODE(0) | \ EBC_BXAP_WBF_ENCODE(0) | \ EBC_BXAP_TH_ENCODE(1) | \ @@ -460,7 +459,7 @@ EBC_BXAP_BEM_RW | \ EBC_BXAP_PEN_DISABLED) #define CONFIG_SYS_EBC_PB3CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA3_BASE) | \ - EBC_BXCR_BS_1MB | \ + EBC_BXCR_BS_16MB | \ EBC_BXCR_BU_RW | \ EBC_BXCR_BW_32BIT) |