summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/lwmon5/lwmon5.c26
-rw-r--r--include/configs/lwmon5.h4
2 files changed, 19 insertions, 11 deletions
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index 77f9989..9b24a7e 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -96,6 +96,23 @@ int board_early_init_f(void)
gpio_write_bit(CFG_GPIO_FLASH_WP, 1);
+ /*
+ * Reset PHY's:
+ * The PHY's need a 2nd reset pulse, since the MDIO address is latched
+ * upon reset, and with the first reset upon powerup, the addresses are
+ * not latched reliable, since the IRQ line is multiplexed with an
+ * MDIO address. A 2nd reset at this time will make sure, that the
+ * correct address is latched.
+ */
+ gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
+ gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+ udelay(1000);
+ gpio_write_bit(CFG_GPIO_PHY0_RST, 0);
+ gpio_write_bit(CFG_GPIO_PHY1_RST, 0);
+ udelay(1000);
+ gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
+ gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+
return 0;
}
@@ -231,15 +248,6 @@ int misc_init_r(void)
out_be32((void *)CFG_LIME_MMR, CFG_LIME_MMR_VALUE);
/*
- * Reset PHY's
- */
- gpio_write_bit(CFG_GPIO_PHY0_RST, 0);
- gpio_write_bit(CFG_GPIO_PHY1_RST, 0);
- udelay(100);
- gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
- gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
-
- /*
* Init display controller
*/
/* Setup dot clock (internal PLL, division rate 1/16) */
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 00c34d5..52deab4 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -432,7 +432,7 @@
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO15 */ \
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4) */ \
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMCTxD(5) */ \
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMCTxD(6) */ \
@@ -473,7 +473,7 @@
{GPIO1_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO53 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 Unselect via TraceSelect Bit */ \
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \