summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/armv7/am33xx/board.c261
-rw-r--r--arch/arm/include/asm/arch-am33xx/sys_proto.h27
-rw-r--r--board/ti/am335x/Makefile1
-rw-r--r--board/ti/am335x/board.c299
-rw-r--r--board/ti/am335x/board.h49
-rw-r--r--board/ti/am335x/mux.c1
6 files changed, 350 insertions, 288 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 0b8b76d..8280b35 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -36,11 +36,6 @@
DECLARE_GLOBAL_DATA_PTR;
-static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
-#ifdef CONFIG_SPL_BUILD
-static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
-#endif
-
static const struct gpio_bank gpio_bank_am33xx[4] = {
{ (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
{ (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
@@ -50,172 +45,6 @@ static const struct gpio_bank gpio_bank_am33xx[4] = {
const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
-/* MII mode defines */
-#define MII_MODE_ENABLE 0x0
-#define RGMII_MODE_ENABLE 0xA
-
-/* GPIO that controls power to DDR on EVM-SK */
-#define GPIO_DDR_VTT_EN 7
-
-static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-static struct am335x_baseboard_id __attribute__((section (".data"))) header;
-
-static inline int board_is_bone(void)
-{
- return !strncmp(header.name, "A335BONE", HDR_NAME_LEN);
-}
-
-static inline int board_is_bone_lt(void)
-{
- return !strncmp(header.name, "A335BNLT", HDR_NAME_LEN);
-}
-
-static inline int board_is_evm_sk(void)
-{
- return !strncmp("A335X_SK", header.name, HDR_NAME_LEN);
-}
-
-/*
- * Read header information from EEPROM into global structure.
- */
-static int read_eeprom(void)
-{
- /* Check if baseboard eeprom is available */
- if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
- puts("Could not probe the EEPROM; something fundamentally "
- "wrong on the I2C bus.\n");
- return -ENODEV;
- }
-
- /* read the eeprom using i2c */
- if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header,
- sizeof(header))) {
- puts("Could not read the EEPROM; something fundamentally"
- " wrong on the I2C bus.\n");
- return -EIO;
- }
-
- if (header.magic != 0xEE3355AA) {
- /*
- * read the eeprom using i2c again,
- * but use only a 1 byte address
- */
- if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1,
- (uchar *)&header, sizeof(header))) {
- puts("Could not read the EEPROM; something "
- "fundamentally wrong on the I2C bus.\n");
- return -EIO;
- }
-
- if (header.magic != 0xEE3355AA) {
- printf("Incorrect magic number (0x%x) in EEPROM\n",
- header.magic);
- return -EINVAL;
- }
- }
-
- return 0;
-}
-
-#ifdef CONFIG_SPL_BUILD
-/* UART Defines */
-#define UART_RESET (0x1 << 1)
-#define UART_CLK_RUNNING_MASK 0x1
-#define UART_SMART_IDLE_EN (0x1 << 0x3)
-
-static void rtc32k_enable(void)
-{
- struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE;
-
- /*
- * Unlock the RTC's registers. For more details please see the
- * RTC_SS section of the TRM. In order to unlock we need to
- * write these specific values (keys) in this order.
- */
- writel(0x83e70b13, &rtc->kick0r);
- writel(0x95a4f1e0, &rtc->kick1r);
-
- /* Enable the RTC 32K OSC by setting bits 3 and 6. */
- writel((1 << 3) | (1 << 6), &rtc->osc);
-}
-#endif
-
-/*
- * Determine what type of DDR we have.
- */
-static short inline board_memory_type(void)
-{
- /* The following boards are known to use DDR3. */
- if (board_is_evm_sk() || board_is_bone_lt())
- return EMIF_REG_SDRAM_TYPE_DDR3;
-
- return EMIF_REG_SDRAM_TYPE_DDR2;
-}
-
-/*
- * early system init of muxing and clocks.
- */
-void s_init(void)
-{
- /* WDT1 is already running when the bootloader gets control
- * Disable it to avoid "random" resets
- */
- writel(0xAAAA, &wdtimer->wdtwspr);
- while (readl(&wdtimer->wdtwwps) != 0x0)
- ;
- writel(0x5555, &wdtimer->wdtwspr);
- while (readl(&wdtimer->wdtwwps) != 0x0)
- ;
-
-#ifdef CONFIG_SPL_BUILD
- /* Setup the PLLs and the clocks for the peripherals */
- pll_init();
-
- /* Enable RTC32K clock */
- rtc32k_enable();
-
- /* UART softreset */
- u32 regVal;
-
- enable_uart0_pin_mux();
-
- regVal = readl(&uart_base->uartsyscfg);
- regVal |= UART_RESET;
- writel(regVal, &uart_base->uartsyscfg);
- while ((readl(&uart_base->uartsyssts) &
- UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
- ;
-
- /* Disable smart idle */
- regVal = readl(&uart_base->uartsyscfg);
- regVal |= UART_SMART_IDLE_EN;
- writel(regVal, &uart_base->uartsyscfg);
-
- gd = &gdata;
-
- preloader_console_init();
-
- /* Initalize the board header */
- enable_i2c0_pin_mux();
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- if (read_eeprom() < 0)
- puts("Could not get board ID.\n");
-
- enable_board_pin_mux(&header);
- if (board_is_evm_sk()) {
- /*
- * EVM SK 1.2A and later use gpio0_7 to enable DDR3.
- * This is safe enough to do on older revs.
- */
- gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
- gpio_direction_output(GPIO_DDR_VTT_EN, 1);
- }
-
- config_ddr(board_memory_type());
-#endif
-}
-
#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
@@ -234,93 +63,3 @@ void setup_clocks_for_console(void)
/* Not yet implemented */
return;
}
-
-/*
- * Basic board specific setup. Pinmux has been handled already.
- */
-int board_init(void)
-{
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- if (read_eeprom() < 0)
- puts("Could not get board ID.\n");
-
- gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
-
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_TI_CPSW
-static void cpsw_control(int enabled)
-{
- /* VTP can be added here */
-
- return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
- {
- .slave_reg_ofs = 0x208,
- .sliver_reg_ofs = 0xd80,
- .phy_id = 0,
- },
- {
- .slave_reg_ofs = 0x308,
- .sliver_reg_ofs = 0xdc0,
- .phy_id = 1,
- },
-};
-
-static struct cpsw_platform_data cpsw_data = {
- .mdio_base = AM335X_CPSW_MDIO_BASE,
- .cpsw_base = AM335X_CPSW_BASE,
- .mdio_div = 0xff,
- .channels = 8,
- .cpdma_reg_ofs = 0x800,
- .slaves = 1,
- .slave_data = cpsw_slaves,
- .ale_reg_ofs = 0xd00,
- .ale_entries = 1024,
- .host_port_reg_ofs = 0x108,
- .hw_stats_reg_ofs = 0x900,
- .mac_control = (1 << 5),
- .control = cpsw_control,
- .host_port_num = 0,
- .version = CPSW_CTRL_VERSION_2,
-};
-
-int board_eth_init(bd_t *bis)
-{
- uint8_t mac_addr[6];
- uint32_t mac_hi, mac_lo;
-
- if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
- debug("<ethaddr> not set. Reading from E-fuse\n");
- /* try reading mac address from efuse */
- mac_lo = readl(&cdev->macid0l);
- mac_hi = readl(&cdev->macid0h);
- mac_addr[0] = mac_hi & 0xFF;
- mac_addr[1] = (mac_hi & 0xFF00) >> 8;
- mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
- mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
- mac_addr[4] = mac_lo & 0xFF;
- mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-
- if (is_valid_ether_addr(mac_addr))
- eth_setenv_enetaddr("ethaddr", mac_addr);
- else
- return -1;
- }
-
- if (board_is_bone() || board_is_bone_lt()) {
- writel(MII_MODE_ENABLE, &cdev->miisel);
- cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
- PHY_INTERFACE_MODE_MII;
- } else {
- writel(RGMII_MODE_ENABLE, &cdev->miisel);
- cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
- PHY_INTERFACE_MODE_RGMII;
- }
-
- return cpsw_register(&cpsw_data);
-}
-#endif
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index 819ea65..9cf35e0 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -19,24 +19,6 @@
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
-/*
- * AM335x parts define a system EEPROM that defines certain sub-fields.
- * We use these fields to in turn see what board we are on, and what
- * that might require us to set or not set.
- */
-#define HDR_NO_OF_MAC_ADDR 3
-#define HDR_ETH_ALEN 6
-#define HDR_NAME_LEN 8
-
-struct am335x_baseboard_id {
- unsigned int magic;
- char name[HDR_NAME_LEN];
- char version[4];
- char serial[12];
- char config[32];
- char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN];
-};
-
#define BOARD_REV_ID 0x0
u32 get_cpu_rev(void);
@@ -51,13 +33,4 @@ u32 get_device_type(void);
void setup_clocks_for_console(void);
void ddr_pll_config(unsigned int ddrpll_M);
-/*
- * We have three pin mux functions that must exist. We must be able to enable
- * uart0, for initial output and i2c0 to read the main EEPROM. We then have a
- * main pinmux function that can be overridden to enable all other pinmux that
- * is required on the board.
- */
-void enable_uart0_pin_mux(void);
-void enable_i2c0_pin_mux(void);
-void enable_board_pin_mux(struct am335x_baseboard_id *header);
#endif
diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile
index ca50eef..67a87a1 100644
--- a/board/ti/am335x/Makefile
+++ b/board/ti/am335x/Makefile
@@ -22,6 +22,7 @@ ifdef CONFIG_SPL_BUILD
COBJS := mux.o
endif
+COBJS += board.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
new file mode 100644
index 0000000..5279d1a
--- /dev/null
+++ b/board/ti/am335x/board.c
@@ -0,0 +1,299 @@
+/*
+ * board.c
+ *
+ * Board functions for TI AM335X based boards
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+#ifdef CONFIG_SPL_BUILD
+static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
+#endif
+
+/* MII mode defines */
+#define MII_MODE_ENABLE 0x0
+#define RGMII_MODE_ENABLE 0xA
+
+/* GPIO that controls power to DDR on EVM-SK */
+#define GPIO_DDR_VTT_EN 7
+
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+static struct am335x_baseboard_id __attribute__((section (".data"))) header;
+
+static inline int board_is_bone(void)
+{
+ return !strncmp(header.name, "A335BONE", HDR_NAME_LEN);
+}
+
+static inline int board_is_bone_lt(void)
+{
+ return !strncmp(header.name, "A335BNLT", HDR_NAME_LEN);
+}
+
+static inline int board_is_evm_sk(void)
+{
+ return !strncmp("A335X_SK", header.name, HDR_NAME_LEN);
+}
+
+/*
+ * Read header information from EEPROM into global structure.
+ */
+static int read_eeprom(void)
+{
+ /* Check if baseboard eeprom is available */
+ if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
+ puts("Could not probe the EEPROM; something fundamentally "
+ "wrong on the I2C bus.\n");
+ return -ENODEV;
+ }
+
+ /* read the eeprom using i2c */
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header,
+ sizeof(header))) {
+ puts("Could not read the EEPROM; something fundamentally"
+ " wrong on the I2C bus.\n");
+ return -EIO;
+ }
+
+ if (header.magic != 0xEE3355AA) {
+ /*
+ * read the eeprom using i2c again,
+ * but use only a 1 byte address
+ */
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1,
+ (uchar *)&header, sizeof(header))) {
+ puts("Could not read the EEPROM; something "
+ "fundamentally wrong on the I2C bus.\n");
+ return -EIO;
+ }
+
+ if (header.magic != 0xEE3355AA) {
+ printf("Incorrect magic number (0x%x) in EEPROM\n",
+ header.magic);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+/* UART Defines */
+#ifdef CONFIG_SPL_BUILD
+#define UART_RESET (0x1 << 1)
+#define UART_CLK_RUNNING_MASK 0x1
+#define UART_SMART_IDLE_EN (0x1 << 0x3)
+
+static void rtc32k_enable(void)
+{
+ struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE;
+
+ /*
+ * Unlock the RTC's registers. For more details please see the
+ * RTC_SS section of the TRM. In order to unlock we need to
+ * write these specific values (keys) in this order.
+ */
+ writel(0x83e70b13, &rtc->kick0r);
+ writel(0x95a4f1e0, &rtc->kick1r);
+
+ /* Enable the RTC 32K OSC by setting bits 3 and 6. */
+ writel((1 << 3) | (1 << 6), &rtc->osc);
+}
+#endif
+
+/*
+ * Determine what type of DDR we have.
+ */
+static short inline board_memory_type(void)
+{
+ /* The following boards are known to use DDR3. */
+ if (board_is_evm_sk() || board_is_bone_lt())
+ return EMIF_REG_SDRAM_TYPE_DDR3;
+
+ return EMIF_REG_SDRAM_TYPE_DDR2;
+}
+
+/*
+ * early system init of muxing and clocks.
+ */
+void s_init(void)
+{
+ /* WDT1 is already running when the bootloader gets control
+ * Disable it to avoid "random" resets
+ */
+ writel(0xAAAA, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+ writel(0x5555, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+
+#ifdef CONFIG_SPL_BUILD
+ /* Setup the PLLs and the clocks for the peripherals */
+ pll_init();
+
+ /* Enable RTC32K clock */
+ rtc32k_enable();
+
+ /* UART softreset */
+ u32 regVal;
+
+ enable_uart0_pin_mux();
+
+ regVal = readl(&uart_base->uartsyscfg);
+ regVal |= UART_RESET;
+ writel(regVal, &uart_base->uartsyscfg);
+ while ((readl(&uart_base->uartsyssts) &
+ UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
+ ;
+
+ /* Disable smart idle */
+ regVal = readl(&uart_base->uartsyscfg);
+ regVal |= UART_SMART_IDLE_EN;
+ writel(regVal, &uart_base->uartsyscfg);
+
+ gd = &gdata;
+
+ preloader_console_init();
+
+ /* Initalize the board header */
+ enable_i2c0_pin_mux();
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ if (read_eeprom() < 0)
+ puts("Could not get board ID.\n");
+
+ enable_board_pin_mux(&header);
+ if (board_is_evm_sk()) {
+ /*
+ * EVM SK 1.2A and later use gpio0_7 to enable DDR3.
+ * This is safe enough to do on older revs.
+ */
+ gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
+ gpio_direction_output(GPIO_DDR_VTT_EN, 1);
+ }
+
+ config_ddr(board_memory_type());
+#endif
+}
+
+/*
+ * Basic board specific setup. Pinmux has been handled already.
+ */
+int board_init(void)
+{
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ if (read_eeprom() < 0)
+ puts("Could not get board ID.\n");
+
+ gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+
+ return 0;
+}
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+static void cpsw_control(int enabled)
+{
+ /* VTP can be added here */
+
+ return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+ {
+ .slave_reg_ofs = 0x208,
+ .sliver_reg_ofs = 0xd80,
+ .phy_id = 0,
+ },
+ {
+ .slave_reg_ofs = 0x308,
+ .sliver_reg_ofs = 0xdc0,
+ .phy_id = 1,
+ },
+};
+
+static struct cpsw_platform_data cpsw_data = {
+ .mdio_base = AM335X_CPSW_MDIO_BASE,
+ .cpsw_base = AM335X_CPSW_BASE,
+ .mdio_div = 0xff,
+ .channels = 8,
+ .cpdma_reg_ofs = 0x800,
+ .slaves = 1,
+ .slave_data = cpsw_slaves,
+ .ale_reg_ofs = 0xd00,
+ .ale_entries = 1024,
+ .host_port_reg_ofs = 0x108,
+ .hw_stats_reg_ofs = 0x900,
+ .mac_control = (1 << 5),
+ .control = cpsw_control,
+ .host_port_num = 0,
+ .version = CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+ uint8_t mac_addr[6];
+ uint32_t mac_hi, mac_lo;
+
+ if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+ debug("<ethaddr> not set. Reading from E-fuse\n");
+ /* try reading mac address from efuse */
+ mac_lo = readl(&cdev->macid0l);
+ mac_hi = readl(&cdev->macid0h);
+ mac_addr[0] = mac_hi & 0xFF;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+ mac_addr[4] = mac_lo & 0xFF;
+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+
+ if (is_valid_ether_addr(mac_addr))
+ eth_setenv_enetaddr("ethaddr", mac_addr);
+ else
+ return -1;
+ }
+
+ if (board_is_bone() || board_is_bone_lt()) {
+ writel(MII_MODE_ENABLE, &cdev->miisel);
+ cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
+ PHY_INTERFACE_MODE_MII;
+ } else {
+ writel(RGMII_MODE_ENABLE, &cdev->miisel);
+ cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
+ PHY_INTERFACE_MODE_RGMII;
+ }
+
+ return cpsw_register(&cpsw_data);
+}
+#endif
diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h
new file mode 100644
index 0000000..7985ab2
--- /dev/null
+++ b/board/ti/am335x/board.h
@@ -0,0 +1,49 @@
+/*
+ * board.h
+ *
+ * TI AM335x boards information header
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * TI AM335x parts define a system EEPROM that defines certain sub-fields.
+ * We use these fields to in turn see what board we are on, and what
+ * that might require us to set or not set.
+ */
+#define HDR_NO_OF_MAC_ADDR 3
+#define HDR_ETH_ALEN 6
+#define HDR_NAME_LEN 8
+
+struct am335x_baseboard_id {
+ unsigned int magic;
+ char name[HDR_NAME_LEN];
+ char version[4];
+ char serial[12];
+ char config[32];
+ char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN];
+};
+
+/*
+ * We have three pin mux functions that must exist. We must be able to enable
+ * uart0, for initial output and i2c0 to read the main EEPROM. We then have a
+ * main pinmux function that can be overridden to enable all other pinmux that
+ * is required on the board.
+ */
+void enable_uart0_pin_mux(void);
+void enable_i2c0_pin_mux(void);
+void enable_board_pin_mux(struct am335x_baseboard_id *header);
+#endif
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 80becd5..82bb9fd 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -18,6 +18,7 @@
#include <asm/arch/hardware.h>
#include <asm/io.h>
#include <i2c.h>
+#include "board.h"
#define MUX_CFG(value, offset) \
__raw_writel(value, (CTRL_BASE + offset));