summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/freescale/mpc837xemds/mpc837xemds.c23
-rw-r--r--cpu/mpc83xx/cpu.c14
-rw-r--r--include/asm-ppc/immap_83xx.h2
-rw-r--r--include/configs/MPC837XEMDS.h15
-rw-r--r--include/mpc83xx.h3
5 files changed, 52 insertions, 5 deletions
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index 156d808..062d762 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -23,6 +23,7 @@
int board_early_init_f(void)
{
+ struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
u8 *bcsr = (u8 *)CONFIG_SYS_BCSR;
/* Enable flash write */
@@ -30,6 +31,18 @@ int board_early_init_f(void)
/* Clear all of the interrupt of BCSR */
bcsr[0xe] = 0xff;
+#ifdef CONFIG_MMC
+ /* Set SPI_SD, SER_SD, and IRQ4_WP so that SD signals go through */
+ bcsr[0xc] |= 0x4c;
+
+ /* Set proper bits in SICR to allow SD signals through */
+ clrsetbits_be32(&im->sysconf.sicrl, SICRL_USB_B, SICRL_USB_B_SD);
+
+ clrsetbits_be32(&im->sysconf.sicrh, (SICRH_GPIO2_E | SICRH_SPI),
+ (SICRH_GPIO2_E_SD | SICRH_SPI_SD));
+
+#endif
+
#ifdef CONFIG_FSL_SERDES
immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
u32 spridr = in_be32(&immr->sysconf.spridr);
@@ -38,21 +51,21 @@ int board_early_init_f(void)
switch (PARTID_NO_E(spridr)) {
case SPR_8377:
fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
- FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
break;
case SPR_8378:
fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SGMII,
- FSL_SERDES_CLK_125, FSL_SERDES_VDD_1V);
+ FSL_SERDES_CLK_125, FSL_SERDES_VDD_1V);
break;
case SPR_8379:
fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
- FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA,
- FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
break;
default:
printf("serdes not configured: unknown CPU part number: "
- "%04x\n", spridr >> 16);
+ "%04x\n", spridr >> 16);
break;
}
#endif /* CONFIG_FSL_SERDES */
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 587fca3..9e0a05d 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -34,6 +34,7 @@
#include <libfdt.h>
#include <tsec.h>
#include <netdev.h>
+#include <fsl_esdhc.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -385,3 +386,16 @@ int cpu_eth_init(bd_t *bis)
#endif
return 0;
}
+
+/*
+ * Initializes on-chip MMC controllers.
+ * to override, implement board_mmc_init()
+ */
+int cpu_mmc_init(bd_t *bis)
+{
+#ifdef CONFIG_FSL_ESDHC
+ return fsl_esdhc_mmc_init(bis);
+#else
+ return 0;
+#endif
+}
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index 77c09db..7b847f8 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -895,4 +895,6 @@ typedef struct immap {
} immap_t;
#endif
+#define CONFIG_SYS_MPC83xx_ESDHC_OFFSET (0x2e000)
+#define CONFIG_SYS_MPC83xx_ESDHC_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET)
#endif /* __IMMAP_83xx__ */
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 0dd6ef5..75b67b4 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -319,6 +319,9 @@
#define CONFIG_OF_BOARD_SETUP 1
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+#define CONFIG_SYS_64BIT_STRTOUL 1
+#define CONFIG_SYS_64BIT_VSPRINTF 1
+
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
@@ -502,6 +505,18 @@ extern int board_pci_host_broken(void);
#undef CONFIG_WATCHDOG /* watchdog disabled */
+#define CONFIG_MMC 1
+
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
/*
* Miscellaneous configurable options
*/
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 191488a..3554fdd 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -266,6 +266,7 @@
/* SICRL bits - MPC837x specific */
#define SICRL_USB_A 0xC0000000
#define SICRL_USB_B 0x30000000
+#define SICRL_USB_B_SD 0x20000000
#define SICRL_UART 0x0C000000
#define SICRL_GPIO_A 0x02000000
#define SICRL_GPIO_B 0x01000000
@@ -307,10 +308,12 @@
#define SICRH_GPIO2_C 0x00002000
#define SICRH_GPIO2_D 0x00001000
#define SICRH_GPIO2_E 0x00000C00
+#define SICRH_GPIO2_E_SD 0x00000800
#define SICRH_GPIO2_F 0x00000300
#define SICRH_GPIO2_G 0x000000C0
#define SICRH_GPIO2_H 0x00000030
#define SICRH_SPI 0x00000003
+#define SICRH_SPI_SD 0x00000001
#endif
/* SWCRR - System Watchdog Control Register