summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/blackfin/cpu/start.S45
1 files changed, 33 insertions, 12 deletions
diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S
index 7a3abba..15ecb1e 100644
--- a/arch/blackfin/cpu/start.S
+++ b/arch/blackfin/cpu/start.S
@@ -52,6 +52,19 @@ ENTRY(_start)
sp.l = LO(L1_SRAM_SCRATCH_END - 20);
sp.h = HI(L1_SRAM_SCRATCH_END - 20);
+ /* Optimization register tricks: keep a base value in the
+ * reserved P registers so we use the load/store with an
+ * offset syntax. R0 = [P5 + <constant>];
+ * P4 - system MMR base
+ * P5 - core MMR base
+ */
+#ifdef CONFIG_HW_WATCHDOG
+ p4.l = 0;
+ p4.h = HI(SYSMMR_BASE);
+#endif
+ p5.l = 0;
+ p5.h = HI(COREMMR_BASE);
+
#ifdef CONFIG_HW_WATCHDOG
# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START
# define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000
@@ -60,13 +73,11 @@ ENTRY(_start)
* That should be long enough to bootstrap ourselves up and
* then the common u-boot code can take over.
*/
- P0.L = LO(WDOG_CNT);
- P0.H = HI(WDOG_CNT);
- R0.L = 0;
- R0.H = HI(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_START));
- [P0] = R0;
+ r0 = 0;
+ r0.h = HI(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_START));
+ [p4 + (WDOG_CNT - SYSMMR_BASE)] = r0;
/* fire up the watchdog - R0.L above needs to be 0x0000 */
- W[P0 + (WDOG_CTL - WDOG_CNT)] = R0;
+ W[p4 + (WDOG_CTL - SYSMMR_BASE)] = r0;
#endif
/* Turn on the serial for debugging the init process */
@@ -121,6 +132,18 @@ ENTRY(_start)
if cc jump .Lnorelocate;
r6 = 0 (x);
+ /* Turn off caches as they require CPLBs and a CPLB miss requires
+ * a software exception handler to process it. But we're about to
+ * clobber any previous executing software (like U-Boot that just
+ * launched a new U-Boot via 'go'), so any handler state will be
+ * unreliable after the memcpy below.
+ */
+ serial_early_puts("Kill Caches");
+ r0 = 0;
+ [p5 + (IMEM_CONTROL - COREMMR_BASE)] = r0;
+ [p5 + (DMEM_CONTROL - COREMMR_BASE)] = r0;
+ ssync;
+
/* In bypass mode, we don't have an LDR with an init block
* so we need to explicitly call it ourselves. This will
* reprogram our clocks, memory, and setup our async banks.
@@ -204,17 +227,15 @@ ENTRY(_start)
serial_early_puts("Lower to 15");
r0 = r7;
r1 = r6;
- p0.l = LO(EVT15);
- p0.h = HI(EVT15);
p1.l = .Lenable_nested;
p1.h = .Lenable_nested;
- [p0] = p1;
+ [p5 + (EVT15 - COREMMR_BASE)] = p1;
r7 = EVT_IVG15 (z);
sti r7;
raise 15;
- p4.l = .LWAIT_HERE;
- p4.h = .LWAIT_HERE;
- reti = p4;
+ p3.l = .LWAIT_HERE;
+ p3.h = .LWAIT_HERE;
+ reti = p3;
rti;
/* Enable nested interrupts before continuing with cpu init */