summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG752
-rw-r--r--CREDITS11
-rw-r--r--MAINTAINERS17
-rwxr-xr-xMAKEALL23
-rw-r--r--Makefile40
-rw-r--r--README4
-rw-r--r--board/cm5200/cm5200.c15
-rw-r--r--board/freescale/common/cadmus.c (renamed from board/cds/common/cadmus.c)0
-rw-r--r--board/freescale/common/cadmus.h (renamed from board/cds/common/cadmus.h)0
-rw-r--r--board/freescale/common/eeprom.c (renamed from board/cds/common/eeprom.c)0
-rw-r--r--board/freescale/common/eeprom.h (renamed from board/cds/common/eeprom.h)0
-rw-r--r--board/freescale/common/ft_board.c (renamed from board/cds/common/ft_board.c)50
-rw-r--r--board/freescale/common/via.c (renamed from board/cds/common/via.c)0
-rw-r--r--board/freescale/common/via.h (renamed from board/cds/common/via.h)0
-rw-r--r--board/freescale/mpc8540ads/Makefile (renamed from board/mpc8540ads/Makefile)0
-rw-r--r--board/freescale/mpc8540ads/config.mk (renamed from board/mpc8540ads/config.mk)0
-rw-r--r--board/freescale/mpc8540ads/init.S (renamed from board/mpc8540ads/init.S)0
-rw-r--r--board/freescale/mpc8540ads/mpc8540ads.c (renamed from board/mpc8540ads/mpc8540ads.c)44
-rw-r--r--board/freescale/mpc8540ads/u-boot.lds (renamed from board/mpc8540ads/u-boot.lds)4
-rw-r--r--board/freescale/mpc8541cds/Makefile (renamed from board/cds/mpc8541cds/Makefile)0
-rw-r--r--board/freescale/mpc8541cds/config.mk (renamed from board/cds/mpc8541cds/config.mk)0
-rw-r--r--board/freescale/mpc8541cds/init.S (renamed from board/cds/mpc8541cds/init.S)0
-rw-r--r--board/freescale/mpc8541cds/mpc8541cds.c (renamed from board/cds/mpc8541cds/mpc8541cds.c)44
-rw-r--r--board/freescale/mpc8541cds/u-boot.lds (renamed from board/cds/mpc8555cds/u-boot.lds)4
-rw-r--r--board/freescale/mpc8544ds/init.S25
-rw-r--r--board/freescale/mpc8544ds/mpc8544ds.c81
-rw-r--r--board/freescale/mpc8548cds/Makefile (renamed from board/cds/mpc8548cds/Makefile)0
-rw-r--r--board/freescale/mpc8548cds/config.mk (renamed from board/cds/mpc8548cds/config.mk)0
-rw-r--r--board/freescale/mpc8548cds/init.S (renamed from board/cds/mpc8548cds/init.S)25
-rw-r--r--board/freescale/mpc8548cds/mpc8548cds.c (renamed from board/cds/mpc8548cds/mpc8548cds.c)58
-rw-r--r--board/freescale/mpc8548cds/u-boot.lds (renamed from board/cds/mpc8548cds/u-boot.lds)4
-rw-r--r--board/freescale/mpc8555cds/Makefile (renamed from board/cds/mpc8555cds/Makefile)0
-rw-r--r--board/freescale/mpc8555cds/config.mk (renamed from board/cds/mpc8555cds/config.mk)0
-rw-r--r--board/freescale/mpc8555cds/init.S (renamed from board/cds/mpc8555cds/init.S)0
-rw-r--r--board/freescale/mpc8555cds/mpc8555cds.c (renamed from board/cds/mpc8555cds/mpc8555cds.c)44
-rw-r--r--board/freescale/mpc8555cds/u-boot.lds (renamed from board/cds/mpc8541cds/u-boot.lds)4
-rw-r--r--board/freescale/mpc8560ads/Makefile (renamed from board/mpc8560ads/Makefile)0
-rw-r--r--board/freescale/mpc8560ads/config.mk (renamed from board/mpc8560ads/config.mk)0
-rw-r--r--board/freescale/mpc8560ads/init.S (renamed from board/mpc8560ads/init.S)0
-rw-r--r--board/freescale/mpc8560ads/mpc8560ads.c (renamed from board/mpc8560ads/mpc8560ads.c)62
-rw-r--r--board/freescale/mpc8560ads/u-boot.lds (renamed from board/mpc8560ads/u-boot.lds)4
-rw-r--r--board/freescale/mpc8568mds/Makefile (renamed from board/mpc8568mds/Makefile)4
-rw-r--r--board/freescale/mpc8568mds/bcsr.c (renamed from board/mpc8568mds/bcsr.c)0
-rw-r--r--board/freescale/mpc8568mds/bcsr.h (renamed from board/mpc8568mds/bcsr.h)0
-rw-r--r--board/freescale/mpc8568mds/config.mk (renamed from board/mpc8568mds/config.mk)0
-rw-r--r--board/freescale/mpc8568mds/init.S (renamed from board/mpc8568mds/init.S)10
-rw-r--r--board/freescale/mpc8568mds/mpc8568mds.c (renamed from board/mpc8568mds/mpc8568mds.c)182
-rw-r--r--board/freescale/mpc8568mds/u-boot.lds (renamed from board/mpc8568mds/u-boot.lds)4
-rw-r--r--board/ids8247/ids8247.c17
-rw-r--r--board/mpc8540eval/mpc8540eval.c14
-rw-r--r--board/ms7722se/Makefile48
-rw-r--r--board/ms7722se/config.mk31
-rw-r--r--board/ms7722se/lowlevel_init.S294
-rw-r--r--board/ms7722se/ms7722se.c59
-rw-r--r--board/ms7722se/u-boot.lds105
-rw-r--r--board/ms7750se/Makefile43
-rw-r--r--board/ms7750se/config.mk23
-rw-r--r--board/ms7750se/lowlevel_init.S179
-rw-r--r--board/ms7750se/ms7750se.c (renamed from board/mpc8568mds/ft_board.c)44
-rw-r--r--board/ms7750se/u-boot.lds105
-rw-r--r--board/pm854/pm854.c14
-rw-r--r--board/pm856/pm856.c11
-rw-r--r--board/sbc8560/sbc8560.c14
-rw-r--r--board/stxgp3/stxgp3.c6
-rw-r--r--board/stxssa/stxssa.c6
-rw-r--r--board/tqm85xx/sdram.c6
-rw-r--r--board/tqm85xx/tqm85xx.c8
-rw-r--r--board/tqm8xx/flash.c4
-rw-r--r--board/tqm8xx/tqm8xx.c15
-rw-r--r--common/Makefile3
-rw-r--r--common/cmd_bootm.c2
-rw-r--r--common/cmd_fdt.c4
-rw-r--r--common/cmd_ide.c4
-rw-r--r--common/fdt_support.c130
-rw-r--r--cpu/at32ap/at32ap700x/Makefile (renamed from cpu/at32ap/at32ap7000/Makefile)0
-rw-r--r--cpu/at32ap/at32ap700x/gpio.c (renamed from cpu/at32ap/at32ap7000/gpio.c)9
-rw-r--r--cpu/at32ap/atmel_mci.c13
-rw-r--r--cpu/mpc83xx/cpu.c18
-rw-r--r--cpu/mpc85xx/Makefile4
-rw-r--r--cpu/mpc85xx/commproc.c28
-rw-r--r--cpu/mpc85xx/cpu.c124
-rw-r--r--cpu/mpc85xx/cpu_init.c16
-rw-r--r--cpu/mpc85xx/ether_fcc.c54
-rw-r--r--cpu/mpc85xx/fdt.c64
-rw-r--r--cpu/mpc85xx/interrupts.c10
-rw-r--r--cpu/mpc85xx/pci.c34
-rw-r--r--cpu/mpc85xx/qe_io.c4
-rw-r--r--cpu/mpc85xx/serial_scc.c35
-rw-r--r--cpu/mpc85xx/spd_sdram.c17
-rw-r--r--cpu/mpc85xx/speed.c34
-rw-r--r--cpu/mpc85xx/traps.c4
-rw-r--r--cpu/mpc8xx/speed.c5
-rw-r--r--cpu/sh4/Makefile46
-rw-r--r--cpu/sh4/cache.c108
-rw-r--r--cpu/sh4/config.mk28
-rw-r--r--cpu/sh4/cpu.c83
-rw-r--r--cpu/sh4/interrupts.c38
-rw-r--r--cpu/sh4/start.S74
-rw-r--r--cpu/sh4/time.c98
-rw-r--r--cpu/sh4/watchdog.c50
-rw-r--r--doc/README.marubun-pcmcia65
-rw-r--r--doc/README.sh61
-rw-r--r--drivers/mtd/Makefile1
-rw-r--r--drivers/mtd/cfi_flash.c1907
-rw-r--r--drivers/mtd/jedec_flash.c311
-rw-r--r--drivers/pci/fsl_pci_init.c23
-rw-r--r--drivers/pcmcia/Makefile1
-rw-r--r--drivers/pcmcia/marubun_pcmcia.c113
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/serial_sh.c177
-rw-r--r--examples/Makefile5
-rw-r--r--examples/stubs.c18
-rw-r--r--include/asm-arm/io.h26
-rw-r--r--include/asm-avr32/arch-at32ap700x/chip-features.h34
-rw-r--r--include/asm-avr32/arch-at32ap700x/clk.h (renamed from include/asm-avr32/arch-at32ap7000/clk.h)8
-rw-r--r--include/asm-avr32/arch-at32ap700x/gpio.h (renamed from include/asm-avr32/arch-at32ap7000/gpio.h)8
-rw-r--r--include/asm-avr32/arch-at32ap700x/hmatrix2.h (renamed from include/asm-avr32/arch-at32ap7000/hmatrix2.h)0
-rw-r--r--include/asm-avr32/arch-at32ap700x/memory-map.h (renamed from include/asm-avr32/arch-at32ap7000/memory-map.h)0
-rw-r--r--include/asm-avr32/arch-at32ap700x/mmc.h (renamed from include/asm-avr32/arch-at32ap7000/mmc.h)0
-rw-r--r--include/asm-avr32/io.h32
-rw-r--r--include/asm-blackfin/io.h26
-rw-r--r--include/asm-i386/io.h26
-rw-r--r--include/asm-m68k/io.h41
-rw-r--r--include/asm-microblaze/io.h26
-rw-r--r--include/asm-mips/io.h26
-rw-r--r--include/asm-nios/io.h34
-rw-r--r--include/asm-nios2/io.h34
-rw-r--r--include/asm-ppc/immap_85xx.h45
-rw-r--r--include/asm-ppc/immap_fsl_pci.h4
-rw-r--r--include/asm-ppc/io.h58
-rw-r--r--include/asm-ppc/iopin_85xx.h40
-rw-r--r--include/asm-ppc/mmu.h4
-rw-r--r--include/asm-sh/bitops.h151
-rw-r--r--include/asm-sh/byteorder.h30
-rw-r--r--include/asm-sh/cpu_sh4.h41
-rw-r--r--include/asm-sh/cpu_sh7722.h1337
-rw-r--r--include/asm-sh/cpu_sh7750.h196
-rw-r--r--include/asm-sh/errno.h156
-rw-r--r--include/asm-sh/global_data.h50
-rw-r--r--include/asm-sh/io.h231
-rw-r--r--include/asm-sh/irqflags.h126
-rw-r--r--include/asm-sh/posix_types.h123
-rw-r--r--include/asm-sh/processor.h8
-rw-r--r--include/asm-sh/ptrace.h112
-rw-r--r--include/asm-sh/string.h162
-rw-r--r--include/asm-sh/system.h275
-rw-r--r--include/asm-sh/types.h59
-rw-r--r--include/asm-sh/u-boot.h42
-rw-r--r--include/common.h10
-rw-r--r--include/configs/HMI10.h12
-rw-r--r--include/configs/MPC8540ADS.h12
-rw-r--r--include/configs/MPC8541CDS.h13
-rw-r--r--include/configs/MPC8544DS.h119
-rw-r--r--include/configs/MPC8548CDS.h103
-rw-r--r--include/configs/MPC8555CDS.h13
-rw-r--r--include/configs/MPC8560ADS.h14
-rw-r--r--include/configs/MPC8568MDS.h39
-rw-r--r--include/configs/TB5200.h3
-rw-r--r--include/configs/TQM823L.h12
-rw-r--r--include/configs/TQM823M.h14
-rw-r--r--include/configs/TQM850L.h12
-rw-r--r--include/configs/TQM850M.h14
-rw-r--r--include/configs/TQM855L.h12
-rw-r--r--include/configs/TQM855M.h14
-rw-r--r--include/configs/TQM860L.h12
-rw-r--r--include/configs/TQM860M.h20
-rw-r--r--include/configs/TQM862L.h13
-rw-r--r--include/configs/TQM862M.h15
-rw-r--r--include/configs/TQM866M.h13
-rw-r--r--include/configs/TQM885D.h77
-rw-r--r--include/configs/atstk1003.h184
-rw-r--r--include/configs/atstk1004.h185
-rw-r--r--include/configs/ms7722se.h136
-rw-r--r--include/configs/ms7750se.h108
-rw-r--r--include/configs/virtlab2.h12
-rw-r--r--include/e500.h1
-rw-r--r--include/fdt_support.h1
-rw-r--r--include/flash.h11
-rw-r--r--include/ioports.h2
-rw-r--r--lib_avr32/board.c2
-rw-r--r--lib_avr32/interrupts.c2
-rw-r--r--lib_sh/Makefile42
-rw-r--r--lib_sh/board.c210
-rw-r--r--lib_sh/sh_linux.c74
-rw-r--r--lib_sh/time.c75
-rw-r--r--sh_config.mk24
186 files changed, 9769 insertions, 1822 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 015a4ac..ef5c7ea 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,687 @@
+commit 467bcee11fe26ad422f2de971aa70866079870f2
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 15:36:18 2007 +0100
+
+ cfi_flash: Add manufacturer-specific fixups
+
+ Run fixups based on the JEDEC manufacturer ID independent of the
+ command set ID.
+
+ This changes current behaviour: Previously, geometry reversal for AMD
+ chips were done based on the command set ID, while they are now done
+ based on the JEDEC manufacturer and device ID.
+
+ Also add fixup for top-boot Atmel chips. A fixup is needed for
+ AT49BV6416(T) too, but since u-boot currently only reads the low byte
+ of the device ID, there's no way to tell it apart from AT49BV642D,
+ which should not have this fixup. Since AT49BV642D support is
+ necessary to get ATNGW100 board support into mainline, I've commented
+ out the fixup for now.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 15:36:17 2007 +0100
+
+ cfi_flash: Add cmdset-specific init functions
+
+ Move things like reading JEDEC IDs and fixing up geometry reversal
+ into separate functions. The geometry reversal fixup is now performed
+ by altering the qry structure directly, which makes the sector init
+ code slightly cleaner.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit e23741f4a6d8047520ef0d4971762749b3587d32
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 15:36:16 2007 +0100
+
+ cfi_flash: Read whole QRY structure in one go
+
+ Read out the whole CFI Standard Query structure after successful cfi
+ identification. This allows subsequent code to access this information
+ directly without having to go through flash_read_uchar() and friends.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Dec 17 11:02:44 2007 +0100
+
+ AVR32: Fix logic inversion in disable_interrupts()
+
+ disable_interrupts() should return nonzero if interrupts were
+ _enabled_ before, not disabled.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit acac475212cbedb17b321a363a1c878e2b47b37f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 16:51:22 2007 +0100
+
+ AVR32: Enable interrupts at bootup
+
+ The timer code depends on the timer interrupt to keep track of the
+ upper 32 bits of the cycle counter. This obviously doesn't work when
+ interrupts are disabled the whole time.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9570bcd87f4db255514f43b6701746c412f8fef0
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 15 10:03:45 2007 +0100
+
+ AVR32: Fix wrong pin setup for USART3
+
+ As reported by Gerhard Berghofer:
+
+ in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
+ instead of PB18 and PB19.
+
+ which is obviously correct. There's currently no code that uses
+ USART3, but custom boards may run into problems.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 1 12:44:20 2007 +0100
+
+ README: Remove ATSTK1000 daughterboard list
+
+ As noted by Kim Phillips, these lists tend to become out of date.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit c81cbbad21cb0ae983e2e796211202234cdc8be2
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Tue Oct 30 14:56:36 2007 +0100
+
+ Add ATSTK100[234] to MAINTAINERS
+
+ Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
+ "mother". Also update the entry for ATSTK1000 to be not only about the
+ AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 64ff2357b1727213803591813dbc779c924bf772
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:02:54 2007 +0100
+
+ AVR32: Add support for the ATSTK1004 board
+
+ ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
+ which is a derivative of AT32AP7000.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 667568db157f374b85abd7e03596ddd1f0b25681
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:02:54 2007 +0100
+
+ AVR32: Add support for the ATSTK1003 board
+
+ ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
+ which is a derivative of AT32AP7000.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 5fee84a794a51ec830548cda485a770efb018b92
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:23:33 2007 +0100
+
+ AVR32: Make some AT32AP700x peripherals optional
+
+ Add a chip-features file providing definitions of the form
+
+ AT32AP700x_CHIP_HAS_<peripheral>
+
+ to indicate the availability of the given peripheral on the currently
+ selected chip.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 36f28f8a9605ee5dcfa330482cfc62171261af97
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:09:56 2007 +0100
+
+ AVR32: Rename at32ap7000 -> at32ap700x
+
+ The SoC-specific code for all the AT32AP700x CPUs is practically
+ identical; the only difference is that some chips have less features
+ than others. By doing this rename, we can add support for the AP7000
+ derivatives simply by making some features conditional.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Jun 29 18:22:34 2007 +0200
+
+ atmel_mci: Show SR when block read fails
+
+ Show controller status as well as card status when an error occurs
+ during block read.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 12d30aa79779c2aa7a998bbae4c075f822a53004
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:34 2007 +0100
+
+ cfi_flash: Use map_physmem() and unmap_physmem()
+
+ Use map_physmem() and unmap_physmem() to convert from physical to
+ virtual addresses. This gives the arch a chance to provide an uncached
+ mapping for flash accesses.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 4d7d6936eb29af7cca330937808312aa5f61454d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:33 2007 +0100
+
+ Introduce map_physmem() and unmap_physmem()
+
+ map_physmem() returns a virtual address which can be used to access a
+ given physical address without involving the cache. unmap_physmem()
+ should be called when the virtual address returned by map_physmem() is
+ no longer needed.
+
+ This patch adds a stub implementation which simply returns the
+ physical address cast to a uchar * for all architectures except AVR32,
+ which converts the physical address to an uncached virtual mapping.
+ unmap_physmem() is a no-op on all architectures, but if any
+ architecture needs to do such mappings through the TLB, this is the
+ hook where those TLB entries can be invalidated.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:32 2007 +0100
+
+ cfi_flash: Introduce read and write accessors
+
+ Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
+ them to access the flash memory. This makes it clearer when the flash
+ is actually being accessed; merely dereferencing a volatile pointer
+ looks just like any other kind of access.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 812711ce6b3a386125dcf0d6a59588e461abbb87
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:31 2007 +0100
+
+ Implement __raw_{read,write}[bwl] on all architectures
+
+ This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
+ m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
+ from Linux.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Oct 6 18:55:36 2007 +0200
+
+ cfi_flash: Reorder functions and eliminate extra prototypes
+
+ Reorder the functions in cfi_flash.c so that each function only uses
+ functions that have been defined before it. This allows the static
+ prototype declarations near the top to be eliminated and might allow
+ gcc to do a better job inlining functions.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:29 2007 +0100
+
+ cfi_flash: Make some needlessly global functions static
+
+ Make functions not declared in any header file static.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 7e5b9b471518c5652febc68ba62b432193d6abf4
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:28 2007 +0100
+
+ cfi_flash: Break long lines
+
+ This patch tries to keep all lines in the cfi_flash driver below 80
+ columns. There are a few lines left which don't fit this requirement
+ because I couldn't find any trivial way to break them (i.e. it would
+ take some restructuring, which I intend to do in a later patch.)
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Dec 11 13:59:57 2007 +0100
+
+ CFI: synchronize command offsets with Linux CFI driver
+
+ Fixes non-working CFI Flash on the Inka4x0 board.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Dec 7 12:17:34 2007 -0600
+
+ Handle MPC85xx PCIe reset errata (PCI-Ex 38)
+
+ On the MPC85xx boards that have PCIe enable the PCIe errata fix.
+ (MPC8544DS, MPC8548CDS, MPC8568MDS).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Dec 7 12:04:30 2007 -0600
+
+ Update Freescale MPC85xx ADS/CDS/MDS board config
+
+ * Enabled CONFIG_CMD_ELF
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d435793229ce29a42797c1edc39f5b34f987f91a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Dec 7 04:59:26 2007 -0600
+
+ Handle Asynchronous DDR clock on 85xx
+
+ The MPC8572 introduces the concept of an asynchronous DDR clock with
+ regards to the platform clock.
+
+ Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
+ mode.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:34:28 2007 -0600
+
+ Update Freescale MPC85xx ADS/CDS/MDS board config
+
+ * Removed some misc environment setup
+ * Enabled CONFIG_CMDLINE_EDITING
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:47:44 2007 -0600
+
+ Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:16:18 2007 -0600
+
+ Move the MPC8540 ADS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 870ceac5b3a3486c109396e005af81ae762b5710
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:14:50 2007 -0600
+
+ Move the MPC8560 ADS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:13:47 2007 -0600
+
+ Move the MPC8568 MDS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a853d56c59b33415304531443633808736acfc6e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 02:18:59 2007 -0600
+
+ Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
+
+ We already had defines for LAWAR_TRGT_IF_* that we should use
+ rather than creating new ones. Also, added some missing defines for
+ PCIE targets.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 04db400892da37b76a585e332a0c137954ad2015
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 02:10:09 2007 -0600
+
+ Stop using immap_t on 85xx
+
+ In the future the offsets to various blocks may not be in same location.
+ Move to using CFG_MPC85xx_*_ADDR as the base of the registers
+ instead of getting it via &immap.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2714223f8e04ab3e4133ff65872eef366d90bfea
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 01:23:09 2007 -0600
+
+ Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c480861bf000156e6a3e932c258db59ff2212dd3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 01:06:19 2007 -0600
+
+ Update MPC8568 MDS to use libfdt
+
+ Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Nov 14 15:52:06 2007 -0500
+
+ Add PCI Express support on MPC8568MDS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b90d25497625b90ffa3f2911a0895ca237556ff5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 00:11:44 2007 -0600
+
+ Update MPC85xx CDS to use libfdt
+
+ Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 28 22:54:27 2007 -0600
+
+ Update MPC8540 ADS to use libfdt
+
+ Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5ce715802f6c50dc78b3405b92f184b1e3710519
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 28 22:40:31 2007 -0600
+
+ Update MPC8560 ADS to use libfdt
+
+ Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 28 00:36:33 2007 -0600
+
+ Stop using immap_t for cpm offset on 85xx
+
+ In the future the offsets to various blocks may not be in same location.
+ Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
+ instead of getting it via &immap->im_cpm.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Nov 27 23:25:02 2007 -0600
+
+ Stop using immap_t for guts offset on 85xx
+
+ In the future the offsets to various blocks may not be in same location.
+ Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
+ instead of getting it via &immap->im_gur.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 50c03c8cf494d91cdec39670d95337c743e16ec9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Nov 27 22:42:34 2007 -0600
+
+ Update MPC8544 DS config
+
+ * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
+ * Removed some misc environment setup
+ * Moved to using fdtfile & fdtaddr as fdt env var names
+ * Enabled CONFIG_CMDLINE_EDITING
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit addce57e2e4c49e77ffb2020a84690713bb18b47
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 17:12:24 2007 -0600
+
+ Update MPC8544DS to use libfdt
+
+ Updated the MPC8544DS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 00:15:30 2007 -0600
+
+ Add libfdt based ft_cpu_setup for mpc85xx
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Dec 8 08:25:09 2007 +0100
+
+ CFI: Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Fri Dec 7 23:35:02 2007 +0100
+
+ CFI: support JEDEC flash roms in CFI-flash framework
+
+ The following patch adds support for non-CFI flash ROMS, by hooking into the
+ CFI flash code and using most of its code, as recently discussed here in the
+ thread "Mixing CFI and non-CFI flashs".
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c01b17dd856fa120b2970f50d9598546a4927ec3
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Nov 28 21:24:50 2007 -0500
+
+ Conditionally compile fdt_fixup_ethernet()
+
+ Fix compiler warnings: On boards that don't have ethernets defined,
+ don't compile fdt_fixup_ethernet().
+
+commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Nov 27 21:59:46 2007 -0600
+
+ Convert boards that set memory node to use fdt_fixup_memory()
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 17:06:15 2007 -0600
+
+ Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
+
+ We use a combination of the serialN alias and CONFIG_CONS_INDEX to
+ determine which serial alias we should set linux,stdout-path to.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 14:57:45 2007 -0600
+
+ Add common memory fixup function
+
+ Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 11:19:12 2007 -0600
+
+ Conditionally compile fdt_support.c
+
+ Modify common/Makefile to conditionally compile fdt_support.c based
+ on CONFIG_OF_LIBFDT.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d88e7ba0980773479e1a64badb293116071b7ef0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 10:41:40 2007 -0600
+
+ Fix build breakage due to libfdt import
+
+ The IDS8247 got lost in the update and need an API update
+ do to rename of functions in libfdt.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Nov 23 19:43:20 2007 -0500
+
+ Add spaces around the = in the fdt print format.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Dec 7 01:25:38 2007 +0900
+
+ sh: Moved driver of the SuperH dependence
+
+ The composition of the directory in the drivers/ changed.
+ I moved SuperH serial driver and marubun PCMCIA driver.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Dec 6 10:21:19 2007 +0100
+
+ Release v1.3.1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Dec 6 10:21:03 2007 +0100
+
+ ADS5121 Board: fix compile problem.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Dec 3 00:15:28 2007 +0100
+
+ Prepare for 1.3.1-rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 260eea5676ca46903a335686cc020b29c4ca46fe
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Nov 29 01:21:54 2007 +0900
+
+ sh: Add SuperH boards maintainer to MAINTAINERS file
+
+ Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Nov 29 00:13:04 2007 +0900
+
+ sh: Add ms7750se support in MAKEALL
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c7144373427a178332bf9754131c8c34c52c200a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 27 09:44:53 2007 +0100
+
+ sh: Add sh3 and sh4 support in MAKEALL
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 130080874a3d28450098481a262c5f7c855e908d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Nov 25 02:51:17 2007 +0900
+
+ sh: Add document for SuperH.
+
+ This document is a summary of information concerning SuperH of U-Boot.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Nov 25 02:39:31 2007 +0900
+
+ sh: Add marubun's pcmcia driver
+
+ Marubun pcmcia is a chip for PCMCIA used with SuperH.
+ Of course, this can be used even by other architectures.
+ When use this driver, came to be able to use CompactFlash
+ and Ethernet.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit febd86b969b975289ed948f1ac0eb9722da41ced
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Nov 25 02:32:13 2007 +0900
+
+ sh: Update SuperH SCIF driver
+
+ - Changed volatile unsigned to vu_.
+ - Changed Makefile for kconfig.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Nov 26 19:18:21 2007 +0100
@@ -1927,6 +2611,56 @@ Date: Mon Sep 24 00:08:37 2007 +0200
synchronizition with mainline
+commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:42:38 2007 +0900
+
+ sh: Add support command of ide with sh
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:38:42 2007 +0900
+
+ sh: Update Makefile
+
+ Add support MS7722SE01 to Makefile.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:31:13 2007 +0900
+
+ sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:19:24 2007 +0900
+
+ sh: Update MS7750SE01 platform
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 516ad760db3553766267ada01b7d5d727faa4bbd
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:17:08 2007 +0900
+
+ sh: Remove comment out code from include/asm-sh/cpu_sh4.h
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b02bad128669e567fce87d8df823b06a0144b8db
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:12:30 2007 +0900
+
+ sh: Update core code of SuperH.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
Author: Wolfgang Denk <wd@denx.de>
Date: Thu Sep 20 00:04:14 2007 +0200
@@ -8634,6 +9368,24 @@ Date: Tue May 15 07:55:42 2007 -0700
Fix to compile JSE against 20070514 git of u-boot
+commit 69df3c4da0c93017cceb25a366e794570bd0ed98
+Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
+Date: Sun May 13 21:01:03 2007 +0900
+
+ sh: MS7750SE support.
+
+ This adds support for the Hitachi MS7750SE.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
+Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
+Date: Sun May 13 20:58:00 2007 +0900
+
+ sh: First support code of SuperH.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
Author: Stefan Roese <sr@denx.de>
Date: Fri May 11 12:01:49 2007 +0200
diff --git a/CREDITS b/CREDITS
index 0953e7b..13150ae 100644
--- a/CREDITS
+++ b/CREDITS
@@ -117,7 +117,7 @@ N: Arun Dharankar
E: ADharankar@ATTBI.Com
D: threads / scheduler example code
-N: Kári Davíðsson
+N: K?ri Dav??sson
E: kd@flaga.is
D: FLAGA DM Support
@@ -143,7 +143,7 @@ E: info@elste.org
D: Port for the ModNET50 Board, NET+50 CPU Port
W: http://www.imms.de
-N: Daniel Engström
+N: Daniel Engstr?m
E: daniel@omicron.se
D: x86 port, Support for sc520_cdp board
@@ -334,7 +334,7 @@ N: Frank Morauf
E: frank.morauf@salzbrenner.com
D: Support for Embedded Planet RPX Super Board
-N: David Müller
+N: David M?ller
E: d.mueller@elsoft.ch
D: Support for Samsung ARM920T SMDK2410 eval board
@@ -499,3 +499,8 @@ N: Alex Zuepke
E: azu@sysgo.de
D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM
W: www.elinos.com
+
+N: Nobuhiro Iwamatsu
+E: iwamatsu@nigauri.org
+D: Support for SuperH, MS7750SE01 and MS7722SE01 boards.
+W: http://www.nigauri.org/~iwamatsu/
diff --git a/MAINTAINERS b/MAINTAINERS
index 6e3c2ef..be0b8d3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -636,7 +636,22 @@ Hayden Fraser <Hayden.Fraser@freescale.com>
Haavard Skinnemoen <hskinnemoen@atmel.com>
- ATSTK1000 AT32AP7000
+ ATSTK1000 AT32AP7xxx
+ ATSTK1002 AT32AP7000
+ ATSTK1003 AT32AP7001
+ ATSTK1004 AT32AP7002
+
+#########################################################################
+# SuperH Systems: #
+# #
+# Maintainer Name, Email Address #
+# Board CPU #
+#########################################################################
+
+Nobuhiro Iwmaatsu <iwamatsu@nigauri.org>
+
+ MS7750SE SH7750
+ MS7722SE SH7722
#########################################################################
# End of MAINTAINERS list #
diff --git a/MAKEALL b/MAKEALL
index a6e0eef..a05946d 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -647,6 +647,8 @@ LIST_coldfire=" \
LIST_avr32=" \
atstk1002 \
+ atstk1003 \
+ atstk1004 \
"
#########################################################################
@@ -660,6 +662,23 @@ LIST_blackfin=" \
bf561-ezkit \
"
+#########################################################################
+## SH Systems
+#########################################################################
+
+LIST_sh4=" \
+ ms7750se \
+ ms7722se \
+"
+
+LIST_sh3=""
+
+
+LIST_sh=" \
+ ${LIST_sh3} \
+ ${LIST_sh4} \
+"
+
#-----------------------------------------------------------------------
#----- for now, just run PPC by default -----
@@ -694,7 +713,9 @@ do
mips|mips_el| \
nios|nios2| \
ppc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx| \
- x86|I486|TSEC)
+ x86|I486|TSEC| \
+ sh|sh4|sh3 \
+ )
for target in `eval echo '$LIST_'${arg}`
do
build_target ${target}
diff --git a/Makefile b/Makefile
index e5d69b4..87d0a77 100644
--- a/Makefile
+++ b/Makefile
@@ -152,6 +152,9 @@ endif
ifeq ($(ARCH),avr32)
CROSS_COMPILE = avr32-linux-
endif
+ifeq ($(ARCH),sh)
+CROSS_COMPILE = sh4-linux-
+endif
endif
endif
@@ -1928,7 +1931,7 @@ TQM834x_config: unconfig
#########################################################################
MPC8540ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
MPC8540EVAL_config \
MPC8540EVAL_33_config \
@@ -1952,7 +1955,7 @@ MPC8540EVAL_66_slave_config: unconfig
@$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
MPC8560ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
MPC8541CDS_legacy_config \
MPC8541CDS_config: unconfig
@@ -1962,7 +1965,7 @@ MPC8541CDS_config: unconfig
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
echo "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds cds
+ @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
MPC8544DS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
@@ -1975,7 +1978,7 @@ MPC8548CDS_config: unconfig
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
echo "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds cds
+ @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
MPC8555CDS_legacy_config \
MPC8555CDS_config: unconfig
@@ -1985,10 +1988,10 @@ MPC8555CDS_config: unconfig
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
echo "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds cds
+ @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
MPC8568MDS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
PM854_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
@@ -2673,7 +2676,30 @@ bf561-ezkit_config: unconfig
#########################################################################
atstk1002_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+atstk1003_config : unconfig
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+atstk1004_config : unconfig
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+#########################################################################
+#########################################################################
+#########################################################################
+
+#########################################################################
+## sh4 (Renesas SuperH)
+#########################################################################
+ms7750se_config: unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_MS7750SE 1" >> include/config.h
+ @./mkconfig -a $(@:_config=) sh sh4 ms7750se
+
+ms7722se_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_MS7722SE 1" >> include/config.h
+ @./mkconfig -a $(@:_config=) sh sh4 ms7722se
#########################################################################
#########################################################################
diff --git a/README b/README
index 3dad5fc..26f93c2 100644
--- a/README
+++ b/README
@@ -235,9 +235,7 @@ The following options need to be configured:
- Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS.
- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
- Define exactly one of
- CONFIG_ATSTK1002
-
+ Define exactly one, e.g. CONFIG_ATSTK1002
- CPU Module Type: (if CONFIG_COGENT is defined)
Define exactly one of
diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c
index 4a86d3c..79fb71d 100644
--- a/board/cm5200/cm5200.c
+++ b/board/cm5200/cm5200.c
@@ -263,7 +263,6 @@ static void ft_blob_update(void *blob, bd_t *bd)
{
int len, ret, nodeoffset = 0;
char module_name[MODULE_NAME_MAXLEN] = {0};
- ulong memory_data[2] = {0};
compose_module_name(hw_id, module_name);
len = strlen(module_name) + 1;
@@ -273,22 +272,12 @@ static void ft_blob_update(void *blob, bd_t *bd)
printf("ft_blob_update(): cannot set /model property err:%s\n",
fdt_strerror(ret));
- memory_data[0] = cpu_to_be32(bd->bi_memstart);
- memory_data[1] = cpu_to_be32(bd->bi_memsize);
+ ret = fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
- nodeoffset = fdt_path_offset (blob, "/memory");
- if (nodeoffset >= 0) {
- ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
- sizeof(memory_data));
- if (ret < 0)
+ if (ret < 0) {
printf("ft_blob_update): cannot set /memory/reg "
"property err:%s\n", fdt_strerror(ret));
}
- else {
- /* memory node is required in dts */
- printf("ft_blob_update(): cannot find /memory node "
- "err:%s\n", fdt_strerror(nodeoffset));
- }
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
diff --git a/board/cds/common/cadmus.c b/board/freescale/common/cadmus.c
index 5f86de5..5f86de5 100644
--- a/board/cds/common/cadmus.c
+++ b/board/freescale/common/cadmus.c
diff --git a/board/cds/common/cadmus.h b/board/freescale/common/cadmus.h
index 217ea64..217ea64 100644
--- a/board/cds/common/cadmus.h
+++ b/board/freescale/common/cadmus.h
diff --git a/board/cds/common/eeprom.c b/board/freescale/common/eeprom.c
index 5034e0c..5034e0c 100644
--- a/board/cds/common/eeprom.c
+++ b/board/freescale/common/eeprom.c
diff --git a/board/cds/common/eeprom.h b/board/freescale/common/eeprom.h
index 12a0789..12a0789 100644
--- a/board/cds/common/eeprom.h
+++ b/board/freescale/common/eeprom.h
diff --git a/board/cds/common/ft_board.c b/board/freescale/common/ft_board.c
index 3eda100..6f221af 100644
--- a/board/cds/common/ft_board.c
+++ b/board/freescale/common/ft_board.c
@@ -21,24 +21,29 @@
*/
#include <common.h>
-
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
+#include <libfdt.h>
+#include <fdt_support.h>
#include "cadmus.h"
-extern void ft_cpu_setup(void *blob, bd_t *bd);
-
+#if defined(CONFIG_OF_BOARD_SETUP)
static void cds_pci_fixup(void *blob)
{
- int len;
- u32 *map;
- int slot;
- int i;
+ int node, tmp[2];
+ const char *path;
+ int len, slot, i;
+ u32 *map = NULL;
- map = ft_get_prop(blob, "/" OF_SOC "/pci@8000/interrupt-map", &len);
-
- if (!map)
- map = ft_get_prop(blob, "/" OF_PCI "/interrupt-map", &len);
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ node = fdt_path_offset(blob, path);
+ if (node >= 0) {
+ map = fdt_getprop_w(blob, node, "interrupt-map", &len);
+ }
+ }
+ }
if (map) {
len /= sizeof(u32);
@@ -50,33 +55,18 @@ static void cds_pci_fixup(void *blob)
* changes depending on the slot the carrier card is in.
*/
map[3] = ((map[3] + slot - 2) % 4) + 1;
-
map+=7;
}
- } else {
- printf("*** Warning - No PCI node found\n");
}
}
-#endif
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
void
ft_board_setup(void *blob, bd_t *bd)
{
- u32 *p;
- int len;
-
+ ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
-#endif
- ft_cpu_setup(blob, bd);
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
-
cds_pci_fixup(blob);
+#endif
}
#endif
diff --git a/board/cds/common/via.c b/board/freescale/common/via.c
index 4a63d77..4a63d77 100644
--- a/board/cds/common/via.c
+++ b/board/freescale/common/via.c
diff --git a/board/cds/common/via.h b/board/freescale/common/via.h
index 77cfacc..77cfacc 100644
--- a/board/cds/common/via.h
+++ b/board/freescale/common/via.h
diff --git a/board/mpc8540ads/Makefile b/board/freescale/mpc8540ads/Makefile
index 2913650..2913650 100644
--- a/board/mpc8540ads/Makefile
+++ b/board/freescale/mpc8540ads/Makefile
diff --git a/board/mpc8540ads/config.mk b/board/freescale/mpc8540ads/config.mk
index 92f8931..92f8931 100644
--- a/board/mpc8540ads/config.mk
+++ b/board/freescale/mpc8540ads/config.mk
diff --git a/board/mpc8540ads/init.S b/board/freescale/mpc8540ads/init.S
index 544fde9..544fde9 100644
--- a/board/mpc8540ads/init.S
+++ b/board/freescale/mpc8540ads/init.S
diff --git a/board/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index 914e51a..35f5eea 100644
--- a/board/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -30,11 +30,8 @@
#include <asm/processor.h>
#include <asm/immap_85xx.h>
#include <spd.h>
-
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
-
+#include <libfdt.h>
+#include <fdt_support.h>
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
@@ -77,13 +74,12 @@ initdram(int board_type)
{
long dram_size = 0;
extern long spd_sdram (void);
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
puts("Initializing\n");
#if defined(CONFIG_DDR_DLL)
{
- volatile ccsr_gur_t *gur= &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
uint temp_ddrdll = 0;
/*
@@ -125,9 +121,8 @@ initdram(int board_type)
void
local_bus_init(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
uint clkdiv;
uint lbc_hz;
@@ -186,8 +181,7 @@ local_bus_init(void)
void
sdram_init(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_lbc_t *lbc= &immap->im_lbc;
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
puts(" SDRAM: ");
@@ -282,8 +276,7 @@ int testdram (void)
long int fixed_sdram (void)
{
#ifndef CFG_RAMBOOT
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+ volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
ddr->cs0_config = CFG_DDR_CS0_CONFIG;
@@ -331,22 +324,25 @@ pci_init_board(void)
}
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+#if defined(CONFIG_OF_BOARD_SETUP)
void
ft_board_setup(void *blob, bd_t *bd)
{
- u32 *p;
- int len;
+ int node, tmp[2];
+ const char *path;
-#ifdef CONFIG_PCI
- ft_pci_setup(blob, bd);
-#endif
ft_cpu_setup(blob, bd);
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
+#ifdef CONFIG_PCI
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = hose.last_busno - hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
}
}
#endif
diff --git a/board/mpc8540ads/u-boot.lds b/board/freescale/mpc8540ads/u-boot.lds
index e7a88cf..a7c68b3 100644
--- a/board/mpc8540ads/u-boot.lds
+++ b/board/freescale/mpc8540ads/u-boot.lds
@@ -35,7 +35,7 @@ SECTIONS
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/mpc8540ads/init.o (.bootpg)
+ board/freescale/mpc8540ads/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -65,7 +65,7 @@ SECTIONS
.text :
{
cpu/mpc85xx/start.o (.text)
- board/mpc8540ads/init.o (.text)
+ board/freescale/mpc8540ads/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/cds/mpc8541cds/Makefile b/board/freescale/mpc8541cds/Makefile
index 7f53098..7f53098 100644
--- a/board/cds/mpc8541cds/Makefile
+++ b/board/freescale/mpc8541cds/Makefile
diff --git a/board/cds/mpc8541cds/config.mk b/board/freescale/mpc8541cds/config.mk
index 17cc8bc..17cc8bc 100644
--- a/board/cds/mpc8541cds/config.mk
+++ b/board/freescale/mpc8541cds/config.mk
diff --git a/board/cds/mpc8541cds/init.S b/board/freescale/mpc8541cds/init.S
index 978bda5..978bda5 100644
--- a/board/cds/mpc8541cds/init.S
+++ b/board/freescale/mpc8541cds/init.S
diff --git a/board/cds/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index 558ba99..9ab98d4 100644
--- a/board/cds/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -28,6 +28,8 @@
#include <asm/immap_85xx.h>
#include <ioports.h>
#include <spd.h>
+#include <libfdt.h>
+#include <fdt_support.h>
#include "../common/cadmus.h"
#include "../common/eeprom.h"
@@ -203,8 +205,7 @@ int board_early_init_f (void)
int checkboard (void)
{
- volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
/* PCI slot in USER bits CSR[6:7] by convention. */
uint pci_slot = get_pci_slot ();
@@ -250,7 +251,6 @@ long int
initdram(int board_type)
{
long dram_size = 0;
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
puts("Initializing\n");
@@ -263,7 +263,7 @@ initdram(int board_type)
* Override DLL = 1, Course Adj = 1, Tap Select = 0
*/
- volatile ccsr_gur_t *gur= &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
gur->ddrdllcr = 0x81000000;
asm("sync;isync;msync");
@@ -293,9 +293,8 @@ initdram(int board_type)
void
local_bus_init(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
uint clkdiv;
uint lbc_hz;
@@ -344,8 +343,7 @@ sdram_init(void)
#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
uint idx;
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
uint cpu_board_rev;
uint lsdmr_common;
@@ -506,3 +504,31 @@ pci_init_board(void)
pci_mpc85xx_init(hose);
#endif
}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+ int node, tmp[2];
+ const char *path;
+
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
+#ifdef CONFIG_PCI1
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = hose[0].last_busno - hose[0].first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+#ifdef CONFIG_MPC85XX_PCI2
+ path = fdt_getprop(blob, node, "pci1", NULL);
+ if (path) {
+ tmp[1] = hose[1].last_busno - hose[1].first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+ }
+}
+#endif
diff --git a/board/cds/mpc8555cds/u-boot.lds b/board/freescale/mpc8541cds/u-boot.lds
index de0923a..4360d67 100644
--- a/board/cds/mpc8555cds/u-boot.lds
+++ b/board/freescale/mpc8541cds/u-boot.lds
@@ -34,7 +34,7 @@ SECTIONS
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/cds/mpc8555cds/init.o (.bootpg)
+ board/freescale/mpc8541cds/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -64,7 +64,7 @@ SECTIONS
.text :
{
cpu/mpc85xx/start.o (.text)
- board/cds/mpc8555cds/init.o (.text)
+ board/freescale/mpc8541cds/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/freescale/mpc8544ds/init.S b/board/freescale/mpc8544ds/init.S
index 68ccba7..084d4b8 100644
--- a/board/freescale/mpc8544ds/init.S
+++ b/board/freescale/mpc8544ds/init.S
@@ -27,13 +27,6 @@
#include <config.h>
#include <mpc85xx.h>
-#define LAWAR_TRGT_PCI1 0x00000000
-#define LAWAR_TRGT_PCIE1 0x00200000
-#define LAWAR_TRGT_PCIE2 0x00100000
-#define LAWAR_TRGT_PCIE3 0x00300000
-#define LAWAR_TRGT_LBC 0x00400000
-#define LAWAR_TRGT_DDR 0x00f00000
-
/*
* TLB0 and TLB1 Entries
*
@@ -212,31 +205,31 @@ law_entry:
.long (4f-3f)/8
3:
.long 0
- .long (LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN
+ .long (LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN
.long (CFG_PCI1_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
+ .long LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
.long (CFG_PCI1_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_64K)
+ .long LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_64K)
.long (CFG_LBC_CACHE_BASE>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
+ .long LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
.long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_256M)
+ .long LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_256M)
.long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_64K)
+ .long LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_64K)
.long (CFG_PCIE2_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
+ .long LAWAR_EN | LAWAR_TRGT_IF_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
.long (CFG_PCIE2_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_64K)
+ .long LAWAR_EN | LAWAR_TRGT_IF_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_64K)
/* contains both PCIE3 MEM & IO space */
.long (CFG_PCIE3_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_4M)
+ .long LAWAR_EN | LAWAR_TRGT_IF_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_4M)
4:
entry_end
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index b6c9e93..66cb536 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -29,14 +29,11 @@
#include <asm/io.h>
#include <spd.h>
#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
#include "../common/pixis.h"
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-extern void ft_cpu_setup(void *blob, bd_t *bd);
-#endif
-
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif
@@ -52,10 +49,9 @@ int board_early_init_f (void)
int checkboard (void)
{
- volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
- volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+ volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
if ((uint)&gur->porpllsr != 0xe00e0000) {
printf("immap size error %x\n",&gur->porpllsr);
@@ -149,8 +145,7 @@ int first_free_busno=0;
void
pci_init_board(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
uint devdisr = gur->devdisr;
uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
@@ -508,51 +503,47 @@ get_board_sys_clk(ulong dummy)
return val;
}
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+#if defined(CONFIG_OF_BOARD_SETUP)
+
void
ft_board_setup(void *blob, bd_t *bd)
{
- u32 *p;
- int len;
+ int node, tmp[2];
+ const char *path;
ft_cpu_setup(blob, bd);
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
#ifdef CONFIG_PCI1
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len);
- if (p != NULL) {
- p[0] = 0;
- p[1] = pci1_hose.last_busno - pci1_hose.first_busno;
- debug("PCI@8000 first_busno=%d last_busno=%d\n",p[0],p[1]);
- }
-#endif
-#ifdef CONFIG_PCIE1
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@a000/bus-range", &len);
- if (p != NULL) {
- p[0] = 0;
- p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
- debug("PCI@a000 first_busno=%d last_busno=%d\n",p[0],p[1]);
- }
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
#endif
#ifdef CONFIG_PCIE2
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@9000/bus-range", &len);
- if (p != NULL) {
- p[0] = 0;
- p[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
- debug("PCI@9000 first_busno=%d last_busno=%d\n",p[0],p[1]);
- }
+ path = fdt_getprop(blob, node, "pci1", NULL);
+ if (path) {
+ tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+#ifdef CONFIG_PCIE1
+ path = fdt_getprop(blob, node, "pci2", NULL);
+ if (path) {
+ tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
#endif
#ifdef CONFIG_PCIE3
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@b000/bus-range", &len);
- if (p != NULL) {
- p[0] = 0;
- p[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;;
- debug("PCI@b000 first_busno=%d last_busno=%d\n",p[0],p[1]);
- }
+ path = fdt_getprop(blob, node, "pci3", NULL);
+ if (path) {
+ tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
#endif
+ }
}
#endif
diff --git a/board/cds/mpc8548cds/Makefile b/board/freescale/mpc8548cds/Makefile
index 7f53098..7f53098 100644
--- a/board/cds/mpc8548cds/Makefile
+++ b/board/freescale/mpc8548cds/Makefile
diff --git a/board/cds/mpc8548cds/config.mk b/board/freescale/mpc8548cds/config.mk
index b23bc87..b23bc87 100644
--- a/board/cds/mpc8548cds/config.mk
+++ b/board/freescale/mpc8548cds/config.mk
diff --git a/board/cds/mpc8548cds/init.S b/board/freescale/mpc8548cds/init.S
index 72940b0..a83a095 100644
--- a/board/cds/mpc8548cds/init.S
+++ b/board/freescale/mpc8548cds/init.S
@@ -28,13 +28,6 @@
#include <config.h>
#include <mpc85xx.h>
-#define LAWAR_TRGT_PCI1 0x00000000
-#define LAWAR_TRGT_PCI2 0x00100000
-#define LAWAR_TRGT_PCIE 0x00200000
-#define LAWAR_TRGT_RIO 0x00c00000
-#define LAWAR_TRGT_LBC 0x00400000
-#define LAWAR_TRGT_DDR 0x00f00000
-
/*
* TLB0 and TLB1 Entries
*
@@ -232,39 +225,39 @@ law_entry:
.long (4f-3f)/8
3:
.long 0
- .long (LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN
+ .long (LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN
#ifdef CFG_PCI1_MEM_PHYS
.long (CFG_PCI1_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
+ .long LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
.long (CFG_PCI1_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
+ .long LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
#endif
#ifdef CFG_PCI2_MEM_PHYS
.long (CFG_PCI2_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
+ .long LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
.long (CFG_PCI2_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M)
+ .long LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M)
#endif
#ifdef CFG_PCIE1_MEM_PHYS
.long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_512M)
+ .long LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
.long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_1M)
+ .long LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
#endif
/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
.long (CFG_LBC_CACHE_BASE>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
+ .long LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
#ifdef CFG_RIO_MEM_PHYS
.long (CFG_RIO_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)
+ .long LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)
#endif
4:
entry_end
diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index 36d7e1e..47e2dd8 100644
--- a/board/cds/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -29,14 +29,13 @@
#include <asm/immap_fsl_pci.h>
#include <spd.h>
#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
#include "../common/cadmus.h"
#include "../common/eeprom.h"
#include "../common/via.h"
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif
@@ -55,9 +54,8 @@ int board_early_init_f (void)
int checkboard (void)
{
- volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
/* PCI slot in USER bits CSR[6:7] by convention. */
uint pci_slot = get_pci_slot ();
@@ -96,7 +94,6 @@ long int
initdram(int board_type)
{
long dram_size = 0;
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
puts("Initializing\n");
@@ -109,7 +106,7 @@ initdram(int board_type)
* Override DLL = 1, Course Adj = 1, Tap Select = 0
*/
- volatile ccsr_gur_t *gur= &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
gur->ddrdllcr = 0x81000000;
asm("sync;isync;msync");
@@ -139,9 +136,8 @@ initdram(int board_type)
void
local_bus_init(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
uint clkdiv;
uint lbc_hz;
@@ -177,8 +173,7 @@ sdram_init(void)
#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
uint idx;
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
uint cpu_board_rev;
uint lsdmr_common;
@@ -330,8 +325,7 @@ int first_free_busno=0;
void
pci_init_board(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
@@ -524,30 +518,30 @@ int last_stage_init(void)
}
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+#if defined(CONFIG_OF_BOARD_SETUP)
void
ft_pci_setup(void *blob, bd_t *bd)
{
- u32 *p;
- int len;
-
+ int node, tmp[2];
+ const char *path;
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
#ifdef CONFIG_PCI1
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len);
- if (p != NULL) {
- p[0] = 0;
- p[1] = pci1_hose.last_busno - pci1_hose.first_busno;
- debug("PCI@8000 first_busno=%d last_busno=%d\n",p[0],p[1]);
- }
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
#endif
-
#ifdef CONFIG_PCIE1
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@a000/bus-range", &len);
- if (p != NULL) {
- p[0] = 0;
- p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
- debug("PCI@a000 first_busno=%d last_busno=%d\n",p[0],p[1]);
- }
+ path = fdt_getprop(blob, node, "pci1", NULL);
+ if (path) {
+ tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
#endif
+ }
}
#endif
diff --git a/board/cds/mpc8548cds/u-boot.lds b/board/freescale/mpc8548cds/u-boot.lds
index b19c481..ee772d3 100644
--- a/board/cds/mpc8548cds/u-boot.lds
+++ b/board/freescale/mpc8548cds/u-boot.lds
@@ -34,7 +34,7 @@ SECTIONS
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/cds/mpc8548cds/init.o (.bootpg)
+ board/freescale/mpc8548cds/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -64,7 +64,7 @@ SECTIONS
.text :
{
cpu/mpc85xx/start.o (.text)
- board/cds/mpc8548cds/init.o (.text)
+ board/freescale/mpc8548cds/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/cds/mpc8555cds/Makefile b/board/freescale/mpc8555cds/Makefile
index 7f53098..7f53098 100644
--- a/board/cds/mpc8555cds/Makefile
+++ b/board/freescale/mpc8555cds/Makefile
diff --git a/board/cds/mpc8555cds/config.mk b/board/freescale/mpc8555cds/config.mk
index 5dcaa77..5dcaa77 100644
--- a/board/cds/mpc8555cds/config.mk
+++ b/board/freescale/mpc8555cds/config.mk
diff --git a/board/cds/mpc8555cds/init.S b/board/freescale/mpc8555cds/init.S
index 978bda5..978bda5 100644
--- a/board/cds/mpc8555cds/init.S
+++ b/board/freescale/mpc8555cds/init.S
diff --git a/board/cds/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index 8f16421..74c220d 100644
--- a/board/cds/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -26,6 +26,8 @@
#include <asm/immap_85xx.h>
#include <ioports.h>
#include <spd.h>
+#include <libfdt.h>
+#include <fdt_support.h>
#include "../common/cadmus.h"
#include "../common/eeprom.h"
@@ -201,8 +203,7 @@ int board_early_init_f (void)
int checkboard (void)
{
- volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
/* PCI slot in USER bits CSR[6:7] by convention. */
uint pci_slot = get_pci_slot ();
@@ -248,7 +249,6 @@ long int
initdram(int board_type)
{
long dram_size = 0;
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
puts("Initializing\n");
@@ -261,7 +261,7 @@ initdram(int board_type)
* Override DLL = 1, Course Adj = 1, Tap Select = 0
*/
- volatile ccsr_gur_t *gur= &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
gur->ddrdllcr = 0x81000000;
asm("sync;isync;msync");
@@ -291,9 +291,8 @@ initdram(int board_type)
void
local_bus_init(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
uint clkdiv;
uint lbc_hz;
@@ -342,8 +341,7 @@ sdram_init(void)
#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
uint idx;
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
uint cpu_board_rev;
uint lsdmr_common;
@@ -506,3 +504,31 @@ pci_init_board(void)
pci_mpc85xx_init(hose);
#endif
}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+ int node, tmp[2];
+ const char *path;
+
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
+#ifdef CONFIG_PCI1
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = hose[0].last_busno - hose[0].first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+#ifdef CONFIG_MPC85XX_PCI2
+ path = fdt_getprop(blob, node, "pci1", NULL);
+ if (path) {
+ tmp[1] = hose[1].last_busno - hose[1].first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+ }
+}
+#endif
diff --git a/board/cds/mpc8541cds/u-boot.lds b/board/freescale/mpc8555cds/u-boot.lds
index 7a5daef..df21ea8 100644
--- a/board/cds/mpc8541cds/u-boot.lds
+++ b/board/freescale/mpc8555cds/u-boot.lds
@@ -34,7 +34,7 @@ SECTIONS
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/cds/mpc8541cds/init.o (.bootpg)
+ board/freescale/mpc8555cds/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -64,7 +64,7 @@ SECTIONS
.text :
{
cpu/mpc85xx/start.o (.text)
- board/cds/mpc8541cds/init.o (.text)
+ board/freescale/mpc8555cds/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/mpc8560ads/Makefile b/board/freescale/mpc8560ads/Makefile
index 2913650..2913650 100644
--- a/board/mpc8560ads/Makefile
+++ b/board/freescale/mpc8560ads/Makefile
diff --git a/board/mpc8560ads/config.mk b/board/freescale/mpc8560ads/config.mk
index 9aef2bb..9aef2bb 100644
--- a/board/mpc8560ads/config.mk
+++ b/board/freescale/mpc8560ads/config.mk
diff --git a/board/mpc8560ads/init.S b/board/freescale/mpc8560ads/init.S
index 544fde9..544fde9 100644
--- a/board/mpc8560ads/init.S
+++ b/board/freescale/mpc8560ads/init.S
diff --git a/board/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index eef524b..bb7f11b 100644
--- a/board/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -32,10 +32,8 @@
#include <ioports.h>
#include <spd.h>
#include <miiphy.h>
-
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
+#include <libfdt.h>
+#include <fdt_support.h>
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
@@ -278,13 +276,12 @@ initdram(int board_type)
{
long dram_size = 0;
extern long spd_sdram (void);
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
puts("Initializing\n");
#if defined(CONFIG_DDR_DLL)
{
- volatile ccsr_gur_t *gur= &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
uint temp_ddrdll = 0;
/*
@@ -326,9 +323,8 @@ initdram(int board_type)
void
local_bus_init(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
uint clkdiv;
uint lbc_hz;
@@ -387,8 +383,7 @@ local_bus_init(void)
void
sdram_init(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_lbc_t *lbc= &immap->im_lbc;
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
puts(" SDRAM: ");
@@ -483,8 +478,7 @@ int testdram (void)
long int fixed_sdram (void)
{
#ifndef CFG_RAMBOOT
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+ volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
ddr->cs0_config = CFG_DDR_CS0_CONFIG;
@@ -548,35 +542,25 @@ pci_init_board(void)
}
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_soc_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
-
- p = ft_get_prop(blob, "/" OF_SOC "/cpm@e0000000/brg-frequency", &len);
-
- if (p != NULL)
- *p = cpu_to_be32(bd->bi_brgfreq);
-
- p = ft_get_prop(blob,
- "/" OF_SOC "/cpm@e0000000/scc@91a00/current-speed",
- &len);
- if (p != NULL)
- *p = cpu_to_be32(bd->bi_baudrate);
-
- p = ft_get_prop(blob,
- "/" OF_SOC "/cpm@e0000000/scc@91a20/current-speed",
- &len);
- if (p != NULL)
- *p = cpu_to_be32(bd->bi_baudrate);
-}
-
+#if defined(CONFIG_OF_BOARD_SETUP)
void
ft_board_setup(void *blob, bd_t *bd)
{
+ int node, tmp[2];
+ const char *path;
+
ft_cpu_setup(blob, bd);
- ft_soc_setup(blob, bd);
+
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
+#ifdef CONFIG_PCI
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = hose.last_busno - hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+ }
}
#endif
diff --git a/board/mpc8560ads/u-boot.lds b/board/freescale/mpc8560ads/u-boot.lds
index 726a153..c2cba61 100644
--- a/board/mpc8560ads/u-boot.lds
+++ b/board/freescale/mpc8560ads/u-boot.lds
@@ -35,7 +35,7 @@ SECTIONS
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/mpc8560ads/init.o (.bootpg)
+ board/freescale/mpc8560ads/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -65,7 +65,7 @@ SECTIONS
.text :
{
cpu/mpc85xx/start.o (.text)
- board/mpc8560ads/init.o (.text)
+ board/freescale/mpc8560ads/init.o (.text)
cpu/mpc85xx/commproc.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
diff --git a/board/mpc8568mds/Makefile b/board/freescale/mpc8568mds/Makefile
index a799aa4..643fbc0 100644
--- a/board/mpc8568mds/Makefile
+++ b/board/freescale/mpc8568mds/Makefile
@@ -29,9 +29,7 @@ endif
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o \
- bcsr.o \
- ft_board.o
+COBJS := $(BOARD).o bcsr.o
SOBJS := init.o
diff --git a/board/mpc8568mds/bcsr.c b/board/freescale/mpc8568mds/bcsr.c
index aae0f98..aae0f98 100644
--- a/board/mpc8568mds/bcsr.c
+++ b/board/freescale/mpc8568mds/bcsr.c
diff --git a/board/mpc8568mds/bcsr.h b/board/freescale/mpc8568mds/bcsr.h
index aefd9bf..aefd9bf 100644
--- a/board/mpc8568mds/bcsr.h
+++ b/board/freescale/mpc8568mds/bcsr.h
diff --git a/board/mpc8568mds/config.mk b/board/freescale/mpc8568mds/config.mk
index 021522c..021522c 100644
--- a/board/mpc8568mds/config.mk
+++ b/board/freescale/mpc8568mds/config.mk
diff --git a/board/mpc8568mds/init.S b/board/freescale/mpc8568mds/init.S
index 972a7d4..e36036d 100644
--- a/board/mpc8568mds/init.S
+++ b/board/freescale/mpc8568mds/init.S
@@ -28,7 +28,6 @@
#include <config.h>
#include <mpc85xx.h>
-
/*
* TLB0 and TLB1 Entries
*
@@ -216,15 +215,14 @@ tlb1_entry:
#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-#define LAWBAR2 ((CFG_PEX_MEM_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_512M))
+#define LAWBAR2 ((CFG_PCIE1_MEM_BASE>>12) & 0xfffff)
+#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
-#define LAWBAR4 ((CFG_PEX_IO_PHYS>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_8M))
-
+#define LAWBAR4 ((CFG_PCIE1_IO_PHYS>>12) & 0xfffff)
+#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
#define LAWBAR5 ((CFG_SRIO_MEM_BASE>>12) & 0xfffff)
#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
diff --git a/board/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index 818ff13..460cb1b 100644
--- a/board/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -26,9 +26,12 @@
#include <pci.h>
#include <asm/processor.h>
#include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
#include <spd.h>
#include <i2c.h>
#include <ioports.h>
+#include <libfdt.h>
+#include <fdt_support.h>
#include "bcsr.h"
@@ -133,7 +136,6 @@ long int
initdram(int board_type)
{
long dram_size = 0;
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
puts("Initializing\n");
@@ -146,7 +148,7 @@ initdram(int board_type)
* Override DLL = 1, Course Adj = 1, Tap Select = 0
*/
- volatile ccsr_gur_t *gur= &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
gur->ddrdllcr = 0x81000000;
asm("sync;isync;msync");
@@ -176,9 +178,8 @@ initdram(int board_type)
void
local_bus_init(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
uint clkdiv;
uint lbc_hz;
@@ -211,8 +212,7 @@ sdram_init(void)
#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
uint idx;
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
uint lsdmr_common;
@@ -337,16 +337,19 @@ static struct pci_config_table pci_mpc8568mds_config_table[] = {
};
#endif
-static struct pci_controller hose[] = {
- {
+static struct pci_controller pci1_hose = {
#ifndef CONFIG_PCI_PNP
config_table: pci_mpc8568mds_config_table,
#endif
- }
};
-
#endif /* CONFIG_PCI */
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif /* CONFIG_PCIE1 */
+
+int first_free_busno = 0;
+
/*
* pib_init() -- Initialize the PCA9555 IO expander on the PIB board
*/
@@ -389,11 +392,164 @@ pib_init(void)
asm("eieio");
}
+#ifdef CONFIG_PCI
void
pci_init_board(void)
{
-#ifdef CONFIG_PCI
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+ uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+
+#ifdef CONFIG_PCI1
+{
pib_init();
- pci_mpc85xx_init(hose);
+
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pci1_hose;
+
+ uint pci_32 = 1; /* PORDEVSR[15] */
+ uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */
+ uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */
+
+ uint pci_agent = (host_agent == 3) || (host_agent == 4 ) || (host_agent == 6);
+
+ uint pci_speed = 66666000;
+
+ if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
+ printf (" PCI: %d bit, %s MHz, %s, %s, %s\n",
+ (pci_32) ? 32 : 64,
+ (pci_speed == 33333000) ? "33" :
+ (pci_speed == 66666000) ? "66" : "unknown",
+ pci_clk_sel ? "sync" : "async",
+ pci_agent ? "agent" : "host",
+ pci_arb ? "arbiter" : "external-arbiter"
+ );
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCI1_MEM_BASE,
+ CFG_PCI1_MEM_PHYS,
+ CFG_PCI1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCI1_IO_BASE,
+ CFG_PCI1_IO_PHYS,
+ CFG_PCI1_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ hose->first_busno = first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+ first_free_busno = hose->last_busno+1;
+ printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
+ } else {
+ printf (" PCI: disabled\n");
+ }
+}
+#else
+ gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
#endif
+
+#ifdef CONFIG_PCIE1
+{
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pcie1_hose;
+ int pcie_ep = (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
+
+ int pcie_configured = io_sel >= 1;
+
+ if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
+ printf ("\n PCIE connected to slot as %s (base address %x)",
+ pcie_ep ? "End Point" : "Root Complex",
+ (uint)pci);
+
+ if (pci->pme_msg_det) {
+ pci->pme_msg_det = 0xffffffff;
+ debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
+ }
+ printf ("\n");
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCIE1_MEM_BASE,
+ CFG_PCIE1_MEM_PHYS,
+ CFG_PCIE1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCIE1_IO_BASE,
+ CFG_PCIE1_IO_PHYS,
+ CFG_PCIE1_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ hose->first_busno=first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+ printf ("PCIE on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
+
+ first_free_busno=hose->last_busno+1;
+
+ } else {
+ printf (" PCIE: disabled\n");
+ }
}
+#else
+ gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif
+}
+#endif /* CONFIG_PCI */
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ int node, tmp[2];
+ const char *path;
+
+ ft_cpu_setup(blob, bd);
+
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
+#ifdef CONFIG_PCI1
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+#ifdef CONFIG_PCIE1
+ path = fdt_getprop(blob, node, "pci1", NULL);
+ if (path) {
+ tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+ }
+}
+#endif
diff --git a/board/mpc8568mds/u-boot.lds b/board/freescale/mpc8568mds/u-boot.lds
index 71099f6..4682041 100644
--- a/board/mpc8568mds/u-boot.lds
+++ b/board/freescale/mpc8568mds/u-boot.lds
@@ -37,7 +37,7 @@ SECTIONS
.bootpg 0xFFFFF000:
{
cpu/mpc85xx/start.o (.bootpg)
- board/mpc8568mds/init.o (.bootpg)
+ board/freescale/mpc8568mds/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -67,7 +67,7 @@ SECTIONS
.text :
{
cpu/mpc85xx/start.o (.text)
- board/mpc8568mds/init.o (.text)
+ board/freescale/mpc8568mds/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/ids8247/ids8247.c b/board/ids8247/ids8247.c
index b05424d..7176770 100644
--- a/board/ids8247/ids8247.c
+++ b/board/ids8247/ids8247.c
@@ -329,25 +329,14 @@ nand_init (void)
*/
void ft_blob_update(void *blob, bd_t *bd)
{
- int ret, nodeoffset = 0;
- ulong memory_data[2] = {0};
+ int ret;
- memory_data[0] = cpu_to_be32(bd->bi_memstart);
- memory_data[1] = cpu_to_be32(bd->bi_memsize);
+ ret = fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
- nodeoffset = fdt_find_node_by_path (blob, "/memory");
- if (nodeoffset >= 0) {
- ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
- sizeof(memory_data));
- if (ret < 0)
+ if (ret < 0) {
printf("ft_blob_update): cannot set /memory/reg "
"property err:%s\n", fdt_strerror(ret));
}
- else {
- /* memory node is required in dts */
- printf("ft_blob_update(): cannot find /memory node "
- "err:%s\n", fdt_strerror(nodeoffset));
- }
}
void ft_board_setup(void *blob, bd_t *bd)
diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c
index 3b3c8ed..64dfe09 100644
--- a/board/mpc8540eval/mpc8540eval.c
+++ b/board/mpc8540eval/mpc8540eval.c
@@ -35,8 +35,7 @@ long int fixed_sdram (void);
int board_pre_init (void)
{
#if defined(CONFIG_PCI)
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
- volatile ccsr_pcix_t *pci = &immr->im_pcix;
+ volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
pci->peer &= 0xffffffdf; /* disable master abort */
#endif
@@ -68,14 +67,13 @@ long int initdram (int board_type)
{
long dram_size = 0;
extern long spd_sdram (void);
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
#if !defined(CONFIG_RAM_AS_FLASH)
- volatile ccsr_lbc_t *lbc= &immap->im_lbc;
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
sys_info_t sysinfo;
uint temp_lbcdll = 0;
#endif
#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
- volatile ccsr_gur_t *gur= &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
#endif
#if defined(CONFIG_DDR_DLL)
@@ -138,8 +136,7 @@ long int initdram (int board_type)
* enable errors */
uint *p = 0;
uint i = 0;
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+ volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
dma_init();
for (*p = 0; p < (uint *)(8 * 1024); p++) {
if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
@@ -222,8 +219,7 @@ int testdram (void)
long int fixed_sdram (void)
{
#ifndef CFG_RAMBOOT
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+ volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
ddr->cs0_config = CFG_DDR_CS0_CONFIG;
diff --git a/board/ms7722se/Makefile b/board/ms7722se/Makefile
new file mode 100644
index 0000000..6dec013
--- /dev/null
+++ b/board/ms7722se/Makefile
@@ -0,0 +1,48 @@
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# Copyright (C) 2007
+# Kenati Technologies, Inc.
+#
+# board/ms7722se/Makefile
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := ms7722se.o
+SOBJS := lowlevel_init.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/ms7722se/config.mk b/board/ms7722se/config.mk
new file mode 100644
index 0000000..4797d6f
--- /dev/null
+++ b/board/ms7722se/config.mk
@@ -0,0 +1,31 @@
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# Copyright (C) 2007
+# Kenati Technologies, Inc.
+#
+# board/ms7722se/config.mk
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+#
+# TEXT_BASE refers to image _after_ relocation.
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+
+TEXT_BASE = 0x8FFC0000
diff --git a/board/ms7722se/lowlevel_init.S b/board/ms7722se/lowlevel_init.S
new file mode 100644
index 0000000..2024e27
--- /dev/null
+++ b/board/ms7722se/lowlevel_init.S
@@ -0,0 +1,294 @@
+/*
+ * Copyright (C) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * Copyright (C) 2007
+ * Kenati Technologies, Inc.
+ *
+ * board/ms7722se/lowlevel_init.S
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+#include <asm/processor.h>
+
+/*
+ * Board specific low level init code, called _very_ early in the
+ * startup sequence. Relocation to SDRAM has not happened yet, no
+ * stack is available, bss section has not been initialised, etc.
+ *
+ * (Note: As no stack is available, no subroutines can be called...).
+ */
+
+ .global lowlevel_init
+
+ .text
+ .align 2
+
+lowlevel_init:
+
+ mov.l CCR_A, r1 ! Address of Cache Control Register
+ mov.l CCR_D, r0 ! Instruction Cache Invalidate
+ mov.l r0, @r1
+
+ mov.l MMUCR_A, r1 ! Address of MMU Control Register
+ mov.l MMUCR_D, r0 ! TI == TLB Invalidate bit
+ mov.l r0, @r1
+
+ mov.l MSTPCR0_A, r1 ! Address of Power Control Register 0
+ mov.l MSTPCR0_D, r0 !
+ mov.l r0, @r1
+
+ mov.l MSTPCR2_A, r1 ! Address of Power Control Register 2
+ mov.l MSTPCR2_D, r0 !
+ mov.l r0, @r1
+
+ mov.l SBSCR_A, r1 !
+ mov.w SBSCR_D, r0 !
+ mov.w r0, @r1
+
+ mov.l PSCR_A, r1 !
+ mov.w PSCR_D, r0 !
+ mov.w r0, @r1
+
+! mov.l RWTCSR_A, r1 ! 0xA4520004 (Watchdog Control / Status Register)
+! mov.w RWTCSR_D_1, r0 ! 0xA507 -> timer_STOP/WDT_CLK=max
+! mov.w r0, @r1
+
+ mov.l RWTCNT_A, r1 ! 0xA4520000 (Watchdog Count Register)
+ mov.w RWTCNT_D, r0 ! 0x5A00 -> Clear
+ mov.w r0, @r1
+
+ mov.l RWTCSR_A, r1 ! 0xA4520004 (Watchdog Control / Status Register)
+ mov.w RWTCSR_D_2, r0 ! 0xA504 -> timer_STOP/CLK=500ms
+ mov.w r0, @r1
+
+ mov.l FRQCR_A, r1 ! 0xA4150000 Frequency control register
+ mov.l FRQCR_D, r0 !
+ mov.l r0, @r1
+
+ mov.l CCR_A, r1 ! Address of Cache Control Register
+ mov.l CCR_D_2, r0 ! ??
+ mov.l r0, @r1
+
+bsc_init:
+
+ mov.l PSELA_A, r1
+ mov.w PSELA_D, r0
+ mov.w r0, @r1
+
+ mov.l DRVCR_A, r1
+ mov.w DRVCR_D, r0
+ mov.w r0, @r1
+
+ mov.l PCCR_A, r1
+ mov.w PCCR_D, r0
+ mov.w r0, @r1
+
+ mov.l PECR_A, r1
+ mov.w PECR_D, r0
+ mov.w r0, @r1
+
+ mov.l PJCR_A, r1
+ mov.w PJCR_D, r0
+ mov.w r0, @r1
+
+ mov.l PXCR_A, r1
+ mov.w PXCR_D, r0
+ mov.w r0, @r1
+
+ mov.l CMNCR_A, r1 ! CMNCR address -> R1
+ mov.l CMNCR_D, r0 ! CMNCR data -> R0
+ mov.l r0, @r1 ! CMNCR set
+
+ mov.l CS0BCR_A, r1 ! CS0BCR address -> R1
+ mov.l CS0BCR_D, r0 ! CS0BCR data -> R0
+ mov.l r0, @r1 ! CS0BCR set
+
+ mov.l CS2BCR_A, r1 ! CS2BCR address -> R1
+ mov.l CS2BCR_D, r0 ! CS2BCR data -> R0
+ mov.l r0, @r1 ! CS2BCR set
+
+ mov.l CS4BCR_A, r1 ! CS4BCR address -> R1
+ mov.l CS4BCR_D, r0 ! CS4BCR data -> R0
+ mov.l r0, @r1 ! CS4BCR set
+
+ mov.l CS5ABCR_A, r1 ! CS5ABCR address -> R1
+ mov.l CS5ABCR_D, r0 ! CS5ABCR data -> R0
+ mov.l r0, @r1 ! CS5ABCR set
+
+ mov.l CS5BBCR_A, r1 ! CS5BBCR address -> R1
+ mov.l CS5BBCR_D, r0 ! CS5BBCR data -> R0
+ mov.l r0, @r1 ! CS5BBCR set
+
+ mov.l CS6ABCR_A, r1 ! CS6ABCR address -> R1
+ mov.l CS6ABCR_D, r0 ! CS6ABCR data -> R0
+ mov.l r0, @r1 ! CS6ABCR set
+
+ mov.l CS0WCR_A, r1 ! CS0WCR address -> R1
+ mov.l CS0WCR_D, r0 ! CS0WCR data -> R0
+ mov.l r0, @r1 ! CS0WCR set
+
+ mov.l CS2WCR_A, r1 ! CS2WCR address -> R1
+ mov.l CS2WCR_D, r0 ! CS2WCR data -> R0
+ mov.l r0, @r1 ! CS2WCR set
+
+ mov.l CS4WCR_A, r1 ! CS4WCR address -> R1
+ mov.l CS4WCR_D, r0 ! CS4WCR data -> R0
+ mov.l r0, @r1 ! CS4WCR set
+
+ mov.l CS5AWCR_A, r1 ! CS5AWCR address -> R1
+ mov.l CS5AWCR_D, r0 ! CS5AWCR data -> R0
+ mov.l r0, @r1 ! CS5AWCR set
+
+ mov.l CS5BWCR_A, r1 ! CS5BWCR address -> R1
+ mov.l CS5BWCR_D, r0 ! CS5BWCR data -> R0
+ mov.l r0, @r1 ! CS5BWCR set
+
+ mov.l CS6AWCR_A, r1 ! CS6AWCR address -> R1
+ mov.l CS6AWCR_D, r0 ! CS6AWCR data -> R0
+ mov.l r0, @r1 ! CS6AWCR set
+
+ ! SDRAM initialization
+ mov.l SDCR_A, r1 ! SB_SDCR address -> R1
+ mov.l SDCR_D, r0 ! SB_SDCR data -> R0
+ mov.l r0, @r1 ! SB_SDCR set
+
+ mov.l SDWCR_A, r1 ! SB_SDWCR address -> R1
+ mov.l SDWCR_D, r0 ! SB_SDWCR data -> R0
+ mov.l r0, @r1 ! SB_SDWCR set
+
+ mov.l SDPCR_A, r1 ! SB_SDPCR address -> R1
+ mov.l SDPCR_D, r0 ! SB_SDPCR data -> R0
+ mov.l r0, @r1 ! SB_SDPCR set
+
+ mov.l RTCOR_A, r1 ! SB_RTCOR address -> R1
+ mov.l RTCOR_D, r0 ! SB_RTCOR data -> R0
+ mov.l r0, @r1 ! SB_RTCOR set
+
+ mov.l RTCSR_A, r1 ! SB_RTCSR address -> R1
+ mov.l RTCSR_D, r0 ! SB_RTCSR data -> R0
+ mov.l r0, @r1 ! SB_RTCSR set
+
+ mov.l SDMR3_A, r1 ! SDMR3 address -> R1
+ mov #0x00, r0 ! SDMR3 data -> R0
+ mov.b r0, @r1 ! SDMR3 set
+
+ ! BL bit off (init = ON) (?!?)
+
+ stc sr, r0 ! BL bit off(init=ON)
+ mov.l SR_MASK_D, r1
+ and r1, r0
+ ldc r0, sr
+
+ rts
+ mov #0, r0
+
+ .align 2
+
+CCR_A: .long CCR
+MMUCR_A: .long MMUCR
+MSTPCR0_A: .long MSTPCR0
+MSTPCR2_A: .long MSTPCR2
+SBSCR_A: .long SBSCR
+PSCR_A: .long PSCR
+RWTCSR_A: .long RWTCSR
+RWTCNT_A: .long RWTCNT
+FRQCR_A: .long FRQCR
+
+CCR_D: .long 0x00000800
+CCR_D_2: .long 0x00000103
+MMUCR_D: .long 0x00000004
+MSTPCR0_D: .long 0x00001001
+MSTPCR2_D: .long 0xffffffff
+FRQCR_D: .long 0x07022538
+
+PSELA_A: .long 0xa405014E
+PSELA_D: .word 0x0A10
+ .align 2
+
+DRVCR_A: .long 0xa405018A
+DRVCR_D: .word 0x0554
+ .align 2
+
+PCCR_A: .long 0xa4050104
+PCCR_D: .word 0x8800
+ .align 2
+
+PECR_A: .long 0xa4050108
+PECR_D: .word 0x0000
+ .align 2
+
+PJCR_A: .long 0xa4050110
+PJCR_D: .word 0x1000
+ .align 2
+
+PXCR_A: .long 0xa4050148
+PXCR_D: .word 0x0AAA
+ .align 2
+
+CMNCR_A: .long CMNCR
+CMNCR_D: .long 0x00000013
+CS0BCR_A: .long CS0BCR ! Flash bank 1
+CS0BCR_D: .long 0x24920400
+CS2BCR_A: .long CS2BCR ! SRAM
+CS2BCR_D: .long 0x24920400
+CS4BCR_A: .long CS4BCR ! FPGA, PCMCIA, USB, ext slot
+CS4BCR_D: .long 0x24920400
+CS5ABCR_A: .long CS5ABCR ! Ext slot
+CS5ABCR_D: .long 0x24920400
+CS5BBCR_A: .long CS5BBCR ! USB controller
+CS5BBCR_D: .long 0x24920400
+CS6ABCR_A: .long CS6ABCR ! Ethernet
+CS6ABCR_D: .long 0x24920400
+
+CS0WCR_A: .long CS0WCR
+CS0WCR_D: .long 0x00000300
+CS2WCR_A: .long CS2WCR
+CS2WCR_D: .long 0x00000300
+CS4WCR_A: .long CS4WCR
+CS4WCR_D: .long 0x00000300
+CS5AWCR_A: .long CS5AWCR
+CS5AWCR_D: .long 0x00000300
+CS5BWCR_A: .long CS5BWCR
+CS5BWCR_D: .long 0x00000300
+CS6AWCR_A: .long CS6AWCR
+CS6AWCR_D: .long 0x00000300
+
+SDCR_A: .long SBSC_SDCR
+SDCR_D: .long 0x00020809
+SDWCR_A: .long SBSC_SDWCR
+SDWCR_D: .long 0x00164d0d
+SDPCR_A: .long SBSC_SDPCR
+SDPCR_D: .long 0x00000087
+RTCOR_A: .long SBSC_RTCOR
+RTCOR_D: .long 0xA55A0034
+RTCSR_A: .long SBSC_RTCSR
+RTCSR_D: .long 0xA55A0010
+SDMR3_A: .long 0xFE500180
+
+ .align 1
+
+SBSCR_D: .word 0x0040
+PSCR_D: .word 0x0000
+RWTCSR_D_1: .word 0xA507
+RWTCSR_D_2: .word 0xA507
+RWTCNT_D: .word 0x5A00
+
+SR_MASK_D: .long 0xEFFFFF0F
diff --git a/board/ms7722se/ms7722se.c b/board/ms7722se/ms7722se.c
new file mode 100644
index 0000000..0d3d55c
--- /dev/null
+++ b/board/ms7722se/ms7722se.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * Copyright (C) 2007
+ * Kenati Technologies, Inc.
+ *
+ * board/ms7722se/ms7722se.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#define LED_BASE 0xB0800000
+
+int checkboard(void)
+{
+ puts("BOARD: Hitachi UL MS7722SE\n");
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Setup PTXMD[1:0] for /CS6A */
+ outw(inw(PXCR) & ~0xf000, PXCR);
+
+ return 0;
+}
+
+int dram_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_memstart = CFG_SDRAM_BASE;
+ gd->bd->bi_memsize = CFG_SDRAM_SIZE;
+ printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+ return 0;
+}
+
+void led_set_state (unsigned short value)
+{
+ *((volatile unsigned short *) LED_BASE) = (value & 0xFF);
+}
diff --git a/board/ms7722se/u-boot.lds b/board/ms7722se/u-boot.lds
new file mode 100644
index 0000000..692bc62
--- /dev/null
+++ b/board/ms7722se/u-boot.lds
@@ -0,0 +1,105 @@
+/*
+ * Copyrigth (c) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+ /*
+ Base address of internal SDRAM is 0x0C000000.
+ Although size of SDRAM can be either 16 or 32 MBytes,
+ we assume 16 MBytes (ie ignore upper half if the full
+ 32 MBytes is present).
+
+ NOTE: This address must match with the definition of
+ TEXT_BASE in config.mk (in this directory).
+
+ */
+ . = 0x8C000000 + (64*1024*1024) - (256*1024);
+
+ PROVIDE (reloc_dst = .);
+
+ PROVIDE (_ftext = .);
+ PROVIDE (_fcode = .);
+ PROVIDE (_start = .);
+
+ .text :
+ {
+ cpu/sh4/start.o (.text)
+ . = ALIGN(8192);
+ common/environment.o (.ppcenv)
+ . = ALIGN(8192);
+ common/environment.o (.ppcenvr)
+ . = ALIGN(8192);
+ *(.text)
+ . = ALIGN(4);
+ } =0xFF
+ PROVIDE (_ecode = .);
+ .rodata :
+ {
+ *(.rodata)
+ . = ALIGN(4);
+ }
+ PROVIDE (_etext = .);
+
+
+ PROVIDE (_fdata = .);
+ .data :
+ {
+ *(.data)
+ . = ALIGN(4);
+ }
+ PROVIDE (_edata = .);
+
+ PROVIDE (_fgot = .);
+ .got :
+ {
+ *(.got)
+ . = ALIGN(4);
+ }
+ PROVIDE (_egot = .);
+
+ PROVIDE (__u_boot_cmd_start = .);
+ .u_boot_cmd :
+ {
+ *(.u_boot_cmd)
+ . = ALIGN(4);
+ }
+ PROVIDE (__u_boot_cmd_end = .);
+
+ PROVIDE (reloc_dst_end = .);
+ /* _reloc_dst_end = .; */
+
+ PROVIDE (bss_start = .);
+ PROVIDE (__bss_start = .);
+ .bss :
+ {
+ *(.bss)
+ . = ALIGN(4);
+ }
+ PROVIDE (bss_end = .);
+
+ PROVIDE (_end = .);
+}
diff --git a/board/ms7750se/Makefile b/board/ms7750se/Makefile
new file mode 100644
index 0000000..f81d56c
--- /dev/null
+++ b/board/ms7750se/Makefile
@@ -0,0 +1,43 @@
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := ms7750se.o
+SOBJS := lowlevel_init.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#################################################################
diff --git a/board/ms7750se/config.mk b/board/ms7750se/config.mk
new file mode 100644
index 0000000..1eed580
--- /dev/null
+++ b/board/ms7750se/config.mk
@@ -0,0 +1,23 @@
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+TEXT_BASE = 0x8FFC0000
diff --git a/board/ms7750se/lowlevel_init.S b/board/ms7750se/lowlevel_init.S
new file mode 100644
index 0000000..d3e3cd5
--- /dev/null
+++ b/board/ms7750se/lowlevel_init.S
@@ -0,0 +1,179 @@
+/*
+ modified from SH-IPL+g
+ Renesaso SuperH / Solution Enginge MS775xSE01 BSC setting.
+
+ Support CPU : SH7750/SH7750S/SH7750R/SH7751/SH7751R
+
+ Coyright (c) 2007 Nobuhiro Iwamatsu <iwmatsu@nigauri.org>
+
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+*/
+
+#include <config.h>
+#include <version.h>
+
+#include <asm/processor.h>
+
+#ifdef CONFIG_CPU_SH7751
+#define BCR2_D_VALUE 0x2FFC /* Area 1-6 width: 32/32/32/32/32/16 */
+#define WCR1_D_VALUE 0x02770771 /* DMA:0 A6:2 A3:0 A0:1 Others:15 */
+#ifdef CONFIG_MARUBUN_PCCARD
+#define WCR2_D_VALUE 0xFFFE4FE7 /* A6:15 A6B:7 A5:15 A5B:7 A4:15
+ A3:2 A2:15 A1:15 A0:6 A0B:7 */
+#else /* CONFIG_MARUBUN_PCCARD */
+#define WCR2_D_VALUE 0x7FFE4FE7 /* A6:3 A6B:7 A5:15 A5B:7 A4:15
+ A3:2 A2:15 A1:15 A0:6 A0B:7 */
+#endif /* CONFIG_MARUBUN_PCCARD */
+#define WCR3_D_VALUE 0x01777771 /* A6: 0-1 A5: 1-3 A4: 1-3 A3: 1-3
+ A2: 1-3 A1: 1-3 A0: 0-1 */
+#define RTCOR_D_VALUE 0xA50D /* Write code A5, data 0D (~15us?) */
+#define SDMR3_ADDRESS 0xFF940088 /* SDMR3 address on 32-bit bus */
+#define MCR_D1_VALUE 0x100901B4 /* SDRAM 32-bit, CAS/RAS Refresh, ... */
+#define MCR_D2_VALUE 0x500901B4 /* Same w/MRSET now 1 (mode reg cmd) */
+#else /* CONFIG_CPU_SH7751 */
+#define BCR2_D_VALUE 0x2E3C /* Area 1-6 width: 32/32/64/16/32/16 */
+#define WCR1_D_VALUE 0x02720777 /* DMA:0 A6:2 A4:2 A3:0 Others:15 */
+#define WCR2_D_VALUE 0xFFFE4FFF /* A6:15 A6B:7 A5:15 A5B:7 A4:15
+ A3:2 A2:15 A1:15 A0:15 A0B:7 */
+#define WCR3_D_VALUE 0x01717771 /* A6: 0-1 A5: 1-3 A4: 0-1 A3: 1-3
+ A2: 1-3 A1: 1-3 A0: 0-1 */
+#define RTCOR_D_VALUE 0xA510 /* Write code A5, data 10 (~15us?) */
+#define SDMR3_ADDRESS 0xFF940110 /* SDMR3 address on 64-bit bus */
+#define MCR_D1_VALUE 0x8801001C /* SDRAM 64-bit, CAS/RAS Refresh, ... */
+#define MCR_D2_VALUE 0xC801001C /* Same w/MRSET now 1 (mode reg cmd) */
+#endif /* CONFIG_CPU_SH7751 */
+
+ .global lowlevel_init
+ .text
+ .align 2
+
+lowlevel_init:
+
+ mov.l CCR_A, r1 ! CCR Address
+ mov.l CCR_D_DISABLE, r0 ! CCR Data
+ mov.l r0, @r1
+
+init_bsc:
+ mov.l FRQCR_A,r1 /* FRQCR Address */
+ mov.l FRQCR_D,r0 /* FRQCR Data */
+ mov.w r0,@r1
+
+ mov.l BCR1_A,r1 /* BCR1 Address */
+ mov.l BCR1_D,r0 /* BCR1 Data */
+ mov.l r0,@r1
+
+ mov.l BCR2_A,r1 /* BCR2 Address */
+ mov.l BCR2_D,r0 /* BCR2 Data */
+ mov.w r0,@r1
+
+ mov.l WCR1_A,r1 /* WCR1 Address */
+ mov.l WCR1_D,r0 /* WCR1 Data */
+ mov.l r0,@r1
+
+ mov.l WCR2_A,r1 /* WCR2 Address */
+ mov.l WCR2_D,r0 /* WCR2 Data */
+ mov.l r0,@r1
+
+ mov.l WCR3_A,r1 /* WCR3 Address */
+ mov.l WCR3_D,r0 /* WCR3 Data */
+ mov.l r0,@r1
+
+ mov.l MCR_A,r1 /* MCR Address */
+ mov.l MCR_D1,r0 /* MCR Data1 */
+ mov.l r0,@r1
+
+ mov.l SDMR3_A,r1 /* Set SDRAM mode */
+ mov #0,r0
+ mov.b r0,@r1
+
+ ! Do you need PCMCIA setting?
+ ! If so, please add the lines here...
+
+ mov.l RTCNT_A,r1 /* RTCNT Address */
+ mov.l RTCNT_D,r0 /* RTCNT Data */
+ mov.w r0,@r1
+
+ mov.l RTCOR_A,r1 /* RTCOR Address */
+ mov.l RTCOR_D,r0 /* RTCOR Data */
+ mov.w r0,@r1
+
+ mov.l RTCSR_A,r1 /* RTCSR Address */
+ mov.l RTCSR_D,r0 /* RTCSR Data */
+ mov.w r0,@r1
+
+ mov.l RFCR_A,r1 /* RFCR Address */
+ mov.l RFCR_D,r0 /* RFCR Data */
+ mov.w r0,@r1 /* Clear reflesh counter */
+ /* Wait DRAM refresh 30 times */
+ mov #30,r3
+1:
+ mov.w @r1,r0
+ extu.w r0,r2
+ cmp/hi r3,r2
+ bf 1b
+
+ mov.l MCR_A,r1 /* MCR Address */
+ mov.l MCR_D2,r0 /* MCR Data2 */
+ mov.l r0,@r1
+
+ mov.l SDMR3_A,r1 /* Set SDRAM mode */
+ mov #0,r0
+ mov.b r0,@r1
+
+ rts
+ nop
+
+ .align 2
+
+CCR_A: .long CCR
+CCR_D_DISABLE: .long 0x0808
+FRQCR_A: .long FRQCR
+FRQCR_D:
+#ifdef CONFIG_CPU_TYPE_R
+ .long 0x00000e1a /* 12:3:3 */
+#else /* CONFIG_CPU_TYPE_R */
+#ifdef CONFIG_GOOD_SESH4
+ .long 0x00000e13 /* 6:2:1 */
+#else
+ .long 0x00000e23 /* 6:1:1 */
+#endif
+#endif /* CONFIG_CPU_TYPE_R */
+
+BCR1_A: .long BCR1
+BCR1_D: .long 0x00000008 /* Area 3 SDRAM */
+BCR2_A: .long BCR2
+BCR2_D: .long BCR2_D_VALUE /* Bus width settings */
+WCR1_A: .long WCR1
+WCR1_D: .long WCR1_D_VALUE /* Inter-area or turnaround wait states */
+WCR2_A: .long WCR2
+WCR2_D: .long WCR2_D_VALUE /* Per-area access and burst wait states */
+WCR3_A: .long WCR3
+WCR3_D: .long WCR3_D_VALUE /* Address setup and data hold cycles */
+RTCSR_A: .long RTCSR
+RTCSR_D: .long 0xA518 /* RTCSR Write Code A5h Data 18h */
+RTCNT_A: .long RTCNT
+RTCNT_D: .long 0xA500 /* RTCNT Write Code A5h Data 00h */
+RTCOR_A: .long RTCOR
+RTCOR_D: .long RTCOR_D_VALUE /* Set refresh time (about 15us) */
+SDMR3_A: .long SDMR3_ADDRESS
+MCR_A: .long MCR
+MCR_D1: .long MCR_D1_VALUE
+MCR_D2: .long MCR_D2_VALUE
+RFCR_A: .long RFCR
+RFCR_D: .long 0xA400 /* RFCR Write Code A4h Data 00h */
diff --git a/board/mpc8568mds/ft_board.c b/board/ms7750se/ms7750se.c
index 36815cc..d2d824c 100644
--- a/board/mpc8568mds/ft_board.c
+++ b/board/ms7750se/ms7750se.c
@@ -1,5 +1,6 @@
/*
- * Copyright 2004-2007 Freescale Semiconductor.
+ * Copyright (C) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -11,7 +12,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -21,25 +22,30 @@
*/
#include <common.h>
+#include <asm/processor.h>
-#include <ft_build.h>
+int checkboard(void)
+{
+ puts("BOARD: SH7750/SH7750S/SH7750R Solution Engine\n");
+ return 0;
+}
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
-extern void ft_cpu_setup(void *blob, bd_t *bd);
+ gd->bd->bi_memstart = CFG_SDRAM_BASE;
+ gd->bd->bi_memsize = CFG_SDRAM_SIZE;
+ printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+ return 0;
+}
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int board_late_init(void)
{
- u32 *p;
- int len;
-#ifdef CONFIG_PCI
- ft_pci_setup(blob, bd);
-#endif
- ft_cpu_setup(blob, bd);
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
+ return 0;
}
-#endif /* CONFIG_OF_FLAT_TREE && CONFIG_OF_BOARD_SETUP */
diff --git a/board/ms7750se/u-boot.lds b/board/ms7750se/u-boot.lds
new file mode 100644
index 0000000..692bc62
--- /dev/null
+++ b/board/ms7750se/u-boot.lds
@@ -0,0 +1,105 @@
+/*
+ * Copyrigth (c) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+ /*
+ Base address of internal SDRAM is 0x0C000000.
+ Although size of SDRAM can be either 16 or 32 MBytes,
+ we assume 16 MBytes (ie ignore upper half if the full
+ 32 MBytes is present).
+
+ NOTE: This address must match with the definition of
+ TEXT_BASE in config.mk (in this directory).
+
+ */
+ . = 0x8C000000 + (64*1024*1024) - (256*1024);
+
+ PROVIDE (reloc_dst = .);
+
+ PROVIDE (_ftext = .);
+ PROVIDE (_fcode = .);
+ PROVIDE (_start = .);
+
+ .text :
+ {
+ cpu/sh4/start.o (.text)
+ . = ALIGN(8192);
+ common/environment.o (.ppcenv)
+ . = ALIGN(8192);
+ common/environment.o (.ppcenvr)
+ . = ALIGN(8192);
+ *(.text)
+ . = ALIGN(4);
+ } =0xFF
+ PROVIDE (_ecode = .);
+ .rodata :
+ {
+ *(.rodata)
+ . = ALIGN(4);
+ }
+ PROVIDE (_etext = .);
+
+
+ PROVIDE (_fdata = .);
+ .data :
+ {
+ *(.data)
+ . = ALIGN(4);
+ }
+ PROVIDE (_edata = .);
+
+ PROVIDE (_fgot = .);
+ .got :
+ {
+ *(.got)
+ . = ALIGN(4);
+ }
+ PROVIDE (_egot = .);
+
+ PROVIDE (__u_boot_cmd_start = .);
+ .u_boot_cmd :
+ {
+ *(.u_boot_cmd)
+ . = ALIGN(4);
+ }
+ PROVIDE (__u_boot_cmd_end = .);
+
+ PROVIDE (reloc_dst_end = .);
+ /* _reloc_dst_end = .; */
+
+ PROVIDE (bss_start = .);
+ PROVIDE (__bss_start = .);
+ .bss :
+ {
+ *(.bss)
+ . = ALIGN(4);
+ }
+ PROVIDE (bss_end = .);
+
+ PROVIDE (_end = .);
+}
diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c
index 6ead1d0..999d8b5 100644
--- a/board/pm854/pm854.c
+++ b/board/pm854/pm854.c
@@ -45,8 +45,7 @@ long int fixed_sdram(void);
int board_early_init_f (void)
{
#if defined(CONFIG_PCI)
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
- volatile ccsr_pcix_t *pci = &immr->im_pcix;
+ volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
pci->peer &= 0xffffffdf; /* disable master abort */
#endif
@@ -79,13 +78,12 @@ initdram(int board_type)
{
long dram_size = 0;
extern long spd_sdram (void);
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
puts("Initializing\n");
#if defined(CONFIG_DDR_DLL)
{
- volatile ccsr_gur_t *gur= &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
int i,x;
x = 10;
@@ -133,9 +131,8 @@ initdram(int board_type)
void
local_bus_init(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
uint clkdiv;
uint lbc_hz;
@@ -229,8 +226,7 @@ int testdram (void)
long int fixed_sdram (void)
{
#ifndef CFG_RAMBOOT
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+ volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
ddr->cs0_config = CFG_DDR_CS0_CONFIG;
diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c
index a100754..bfde695 100644
--- a/board/pm856/pm856.c
+++ b/board/pm856/pm856.c
@@ -232,13 +232,12 @@ initdram(int board_type)
{
long dram_size = 0;
extern long spd_sdram (void);
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
puts("Initializing\n");
#if defined(CONFIG_DDR_DLL)
{
- volatile ccsr_gur_t *gur= &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
int i,x;
x = 10;
@@ -287,9 +286,8 @@ initdram(int board_type)
void
local_bus_init(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
uint clkdiv;
uint lbc_hz;
@@ -382,8 +380,7 @@ int testdram (void)
long int fixed_sdram (void)
{
#ifndef CFG_RAMBOOT
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+ volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
ddr->cs0_config = CFG_DDR_CS0_CONFIG;
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
index e8b9929..47df884 100644
--- a/board/sbc8560/sbc8560.c
+++ b/board/sbc8560/sbc8560.c
@@ -195,8 +195,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
int board_early_init_f (void)
{
#if defined(CONFIG_PCI)
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
- volatile ccsr_pcix_t *pci = &immr->im_pcix;
+ volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
pci->peer &= 0xfffffffdf; /* disable master abort */
#endif
@@ -264,16 +263,15 @@ long int initdram (int board_type)
{
long dram_size = 0;
extern long spd_sdram (void);
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
#if 0
#if !defined(CONFIG_RAM_AS_FLASH)
- volatile ccsr_lbc_t *lbc= &immap->im_lbc;
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
sys_info_t sysinfo;
uint temp_lbcdll = 0;
#endif
#endif /* 0 */
#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
- volatile ccsr_gur_t *gur= &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
#endif
#if defined(CONFIG_DDR_DLL)
uint temp_ddrdll = 0;
@@ -336,8 +334,7 @@ long int initdram (int board_type)
* enable errors */
uint *p = 0;
uint i = 0;
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+ volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
dma_init();
for (*p = 0; p < (uint *)(8 * 1024); p++) {
if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
@@ -424,8 +421,7 @@ long int fixed_sdram (void)
#define CFG_DDR_CONTROL 0xc2000000
#ifndef CFG_RAMBOOT
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+ volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
ddr->cs0_bnds = 0x00000007;
ddr->cs1_bnds = 0x0010001f;
diff --git a/board/stxgp3/stxgp3.c b/board/stxgp3/stxgp3.c
index a58c043..3649acf 100644
--- a/board/stxgp3/stxgp3.c
+++ b/board/stxgp3/stxgp3.c
@@ -203,8 +203,7 @@ int
board_early_init_f(void)
{
#if defined(CONFIG_PCI)
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
- volatile ccsr_pcix_t *pci = &immr->im_pcix;
+ volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
pci->peer &= 0xfffffffdf; /* disable master abort */
#endif
@@ -283,11 +282,10 @@ initdram (int board_type)
{
long dram_size = 0;
extern long spd_sdram (void);
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
#if defined(CONFIG_DDR_DLL)
{
- volatile ccsr_gur_t *gur= &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
uint temp_ddrdll = 0;
/* Work around to stabilize DDR DLL */
diff --git a/board/stxssa/stxssa.c b/board/stxssa/stxssa.c
index 9bacb98..e2b38a6 100644
--- a/board/stxssa/stxssa.c
+++ b/board/stxssa/stxssa.c
@@ -252,8 +252,7 @@ int
board_early_init_f(void)
{
#if defined(CONFIG_PCI)
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
- volatile ccsr_pcix_t *pci = &immr->im_pcix;
+ volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
pci->peer &= 0xffffffdf; /* disable master abort */
#endif
@@ -302,8 +301,7 @@ initdram (int board_type)
#if defined(CONFIG_DDR_DLL)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_gur_t *gur= &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
uint temp_ddrdll = 0;
/* Work around to stabilize DDR DLL */
diff --git a/board/tqm85xx/sdram.c b/board/tqm85xx/sdram.c
index 9c1f087..2053ade 100644
--- a/board/tqm85xx/sdram.c
+++ b/board/tqm85xx/sdram.c
@@ -57,8 +57,7 @@ int cas_latency(void);
long int sdram_setup(int casl)
{
int i;
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
- volatile ccsr_ddr_t *ddr = &immap->im_ddr;
+ volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR);
unsigned long cfg_ddr_timing1;
unsigned long cfg_ddr_mode;
@@ -150,8 +149,7 @@ long int initdram (int board_type)
* This DLL-Override only used on TQM8540 and TQM8560
*/
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
- volatile ccsr_gur_t *gur= &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
int i,x;
x = 10;
diff --git a/board/tqm85xx/tqm85xx.c b/board/tqm85xx/tqm85xx.c
index 256c076..5d5cb1b 100644
--- a/board/tqm85xx/tqm85xx.c
+++ b/board/tqm85xx/tqm85xx.c
@@ -262,8 +262,7 @@ int checkboard (void)
int misc_init_r (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_lbc_t *memctl = &immap->im_lbc;
+ volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
/*
* Adjust flash start and offset to detected values
@@ -324,9 +323,8 @@ int misc_init_r (void)
*/
void local_bus_init (void)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
uint clkdiv;
uint lbc_hz;
diff --git a/board/tqm8xx/flash.c b/board/tqm8xx/flash.c
index db0a7e5..4342ebc 100644
--- a/board/tqm8xx/flash.c
+++ b/board/tqm8xx/flash.c
@@ -33,6 +33,8 @@
DECLARE_GLOBAL_DATA_PTR;
+#if !defined(CFG_FLASH_CFI_DRIVER) /* do not use if CFI driver is configured */
+
#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
&& !defined(CONFIG_TQM885D)
# ifndef CFG_OR_TIMING_FLASH_AT_50MHZ
@@ -828,3 +830,5 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
/*-----------------------------------------------------------------------
*/
+
+#endif /* !defined(CFG_FLASH_CFI_DRIVER) */
diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c
index cebdcc0..fcd941e 100644
--- a/board/tqm8xx/tqm8xx.c
+++ b/board/tqm8xx/tqm8xx.c
@@ -37,6 +37,7 @@ static long int dram_size (long int, long int *, long int);
#define _NOT_USED_ 0xFFFFFFFF
+/* UPM initialization table for SDRAM: 40, 50, 66 MHz CLKOUT @ CAS latency 2, tWR=2 */
const uint sdram_table[] =
{
/*
@@ -63,14 +64,14 @@ const uint sdram_table[] =
/*
* Single Write. (Offset 18 in UPMA RAM)
*/
- 0x1F0DFC04, 0xEEABBC00, 0x01B27C04, 0x1FF5FC47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ 0x1F0DFC04, 0xEEABBC00, 0x11B77C04, 0xEFFAFC44,
+ 0x1FF5FC47, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Write. (Offset 20 in UPMA RAM)
*/
0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
- 0xF0AFFC00, 0xE1BAFC04, 0x1FF5FC47, /* last */
- _NOT_USED_,
+ 0xF0AFFC00, 0xF0AFFC04, 0xE1BAFC44, 0x1FF5FC47, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
@@ -83,7 +84,7 @@ const uint sdram_table[] =
/*
* Exception. (Offset 3c in UPMA RAM)
*/
- 0x7FFFFC07, /* last */
+ 0xFFFFFC07, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
};
@@ -183,7 +184,7 @@ long int initdram (int board_type)
#ifndef CONFIG_CAN_DRIVER
if ((board_type != 'L') &&
(board_type != 'M') &&
- (board_type != 'D') ) { /* "L" and "M" type boards have only one bank SDRAM */
+ (board_type != 'D') ) { /* only one SDRAM bank on L, M and D modules */
memctl->memc_or3 = CFG_OR3_PRELIM;
memctl->memc_br3 = CFG_BR3_PRELIM;
}
@@ -259,7 +260,7 @@ long int initdram (int board_type)
#ifndef CONFIG_CAN_DRIVER
if ((board_type != 'L') &&
(board_type != 'M') &&
- (board_type != 'D') ) { /* "L" and "M" type boards have only one bank SDRAM */
+ (board_type != 'D') ) { /* only one SDRAM bank on L, M and D modules */
/*
* Check Bank 1 Memory Size
* use current column settings
diff --git a/common/Makefile b/common/Makefile
index ace8cc7..7be89a4 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -55,7 +55,7 @@ COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o
COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o
COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o
COBJS-y += cmd_fdc.o
-COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o
+COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o
COBJS-$(CONFIG_CMD_FDOS) += cmd_fdos.o
COBJS-$(CONFIG_CMD_FLASH) += cmd_flash.o
ifdef CONFIG_FPGA
@@ -105,7 +105,6 @@ COBJS-y += env_onenand.o
COBJS-y += env_nvram.o
COBJS-y += env_nowhere.o
COBJS-y += exports.o
-COBJS-y += fdt_support.o
COBJS-y += flash.o
COBJS-y += fpga.o
COBJS-y += ft_build.o
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index d816349..9546729 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -260,6 +260,8 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (hdr->ih_arch != IH_CPU_NIOS2)
#elif defined(__PPC__)
if (hdr->ih_arch != IH_CPU_PPC)
+#elif defined(__sh__)
+ if (hdr->ih_arch != IH_CPU_SH)
#else
# error Unknown CPU type
#endif
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index 629c9b4..4639126 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -588,7 +588,7 @@ static int fdt_print(const char *pathp, char *prop, int depth)
printf("%s %s\n", pathp, prop);
return 0;
} else if (len > 0) {
- printf("%s=", prop);
+ printf("%s = ", prop);
print_data (nodep, len);
printf("\n");
return 0;
@@ -649,7 +649,7 @@ static int fdt_print(const char *pathp, char *prop, int depth)
pathp);
} else {
if (level <= depth) {
- printf("%s%s=",
+ printf("%s%s = ",
&tabs[MAX_LEVEL - level],
pathp);
print_data (nodep, len);
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 821dcff..c38be4f 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -886,7 +886,7 @@ input_swap_data(int dev, ulong *sect_buf, int words)
#endif /* __LITTLE_ENDIAN || CONFIG_AU1X00 */
-#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA)
+#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA) || defined(CONFIG_SH)
static void
output_data(int dev, ulong *sect_buf, int words)
{
@@ -938,7 +938,7 @@ output_data(int dev, ulong *sect_buf, int words)
}
#endif /* __PPC__ */
-#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA)
+#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA) || defined(CONFIG_SH)
static void
input_data(int dev, ulong *sect_buf, int words)
{
diff --git a/common/fdt_support.c b/common/fdt_support.c
index c67bb3d..b5ee6e9 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -24,13 +24,11 @@
#include <common.h>
#include <linux/ctype.h>
#include <linux/types.h>
-
-#ifdef CONFIG_OF_LIBFDT
-
#include <asm/global_data.h>
#include <fdt.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <exports.h>
/*
* Global data (for the gd->bd)
@@ -70,6 +68,43 @@ int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
return fdt_setprop(fdt, nodeoff, prop, val, len);
}
+#ifdef CONFIG_OF_STDOUT_VIA_ALIAS
+static int fdt_fixup_stdout(void *fdt, int choosenoff)
+{
+ int err = 0;
+#ifdef CONFIG_CONS_INDEX
+ int node;
+ char sername[9] = { 0 };
+ const char *path;
+
+ sprintf(sername, "serial%d", CONFIG_CONS_INDEX - 1);
+
+ err = node = fdt_path_offset(fdt, "/aliases");
+ if (node >= 0) {
+ int len;
+ path = fdt_getprop(fdt, node, sername, &len);
+ if (path) {
+ char *p = malloc(len);
+ err = -FDT_ERR_NOSPACE;
+ if (p) {
+ memcpy(p, path, len);
+ err = fdt_setprop(fdt, choosenoff,
+ "linux,stdout-path", p, len);
+ free(p);
+ }
+ } else {
+ err = len;
+ }
+ }
+#endif
+ if (err < 0)
+ printf("WARNING: could not set linux,stdout-path %s.\n",
+ fdt_strerror(err));
+
+ return err;
+}
+#endif
+
int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force)
{
int nodeoffset;
@@ -160,6 +195,11 @@ int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force)
printf("WARNING: could not set linux,initrd-end %s.\n",
fdt_strerror(err));
}
+
+#ifdef CONFIG_OF_STDOUT_VIA_ALIAS
+ err = fdt_fixup_stdout(fdt, nodeoffset);
+#endif
+
#ifdef OF_STDOUT_PATH
err = fdt_setprop(fdt, nodeoffset,
"linux,stdout-path", OF_STDOUT_PATH, strlen(OF_STDOUT_PATH)+1);
@@ -441,6 +481,87 @@ void do_fixup_by_compat_u32(void *fdt, const char *compat,
do_fixup_by_compat(fdt, compat, prop, &val, 4, create);
}
+int fdt_fixup_memory(void *blob, u64 start, u64 size)
+{
+ int err, nodeoffset, len = 0;
+ u8 tmp[16];
+ const u32 *addrcell, *sizecell;
+
+ err = fdt_check_header(blob);
+ if (err < 0) {
+ printf("%s: %s\n", __FUNCTION__, fdt_strerror(err));
+ return err;
+ }
+
+ /* update, or add and update /memory node */
+ nodeoffset = fdt_path_offset(blob, "/memory");
+ if (nodeoffset < 0) {
+ nodeoffset = fdt_add_subnode(blob, 0, "memory");
+ if (nodeoffset < 0)
+ printf("WARNING: could not create /memory: %s.\n",
+ fdt_strerror(nodeoffset));
+ return nodeoffset;
+ }
+ err = fdt_setprop(blob, nodeoffset, "device_type", "memory",
+ sizeof("memory"));
+ if (err < 0) {
+ printf("WARNING: could not set %s %s.\n", "device_type",
+ fdt_strerror(err));
+ return err;
+ }
+
+ addrcell = fdt_getprop(blob, 0, "#address-cells", NULL);
+ /* use shifts and mask to ensure endianness */
+ if ((addrcell) && (*addrcell == 2)) {
+ tmp[0] = (start >> 56) & 0xff;
+ tmp[1] = (start >> 48) & 0xff;
+ tmp[2] = (start >> 40) & 0xff;
+ tmp[3] = (start >> 32) & 0xff;
+ tmp[4] = (start >> 24) & 0xff;
+ tmp[5] = (start >> 16) & 0xff;
+ tmp[6] = (start >> 8) & 0xff;
+ tmp[7] = (start ) & 0xff;
+ len = 8;
+ } else {
+ tmp[0] = (start >> 24) & 0xff;
+ tmp[1] = (start >> 16) & 0xff;
+ tmp[2] = (start >> 8) & 0xff;
+ tmp[3] = (start ) & 0xff;
+ len = 4;
+ }
+
+ sizecell = fdt_getprop(blob, 0, "#size-cells", NULL);
+ /* use shifts and mask to ensure endianness */
+ if ((sizecell) && (*sizecell == 2)) {
+ tmp[0+len] = (size >> 56) & 0xff;
+ tmp[1+len] = (size >> 48) & 0xff;
+ tmp[2+len] = (size >> 40) & 0xff;
+ tmp[3+len] = (size >> 32) & 0xff;
+ tmp[4+len] = (size >> 24) & 0xff;
+ tmp[5+len] = (size >> 16) & 0xff;
+ tmp[6+len] = (size >> 8) & 0xff;
+ tmp[7+len] = (size ) & 0xff;
+ len += 8;
+ } else {
+ tmp[0+len] = (size >> 24) & 0xff;
+ tmp[1+len] = (size >> 16) & 0xff;
+ tmp[2+len] = (size >> 8) & 0xff;
+ tmp[3+len] = (size ) & 0xff;
+ len += 4;
+ }
+
+ err = fdt_setprop(blob, nodeoffset, "reg", tmp, len);
+ if (err < 0) {
+ printf("WARNING: could not set %s %s.\n",
+ "reg", fdt_strerror(err));
+ return err;
+ }
+ return 0;
+}
+
+#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
+ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
+
void fdt_fixup_ethernet(void *fdt, bd_t *bd)
{
int node;
@@ -486,5 +607,4 @@ void fdt_fixup_ethernet(void *fdt, bd_t *bd)
#endif
}
}
-
-#endif /* CONFIG_OF_LIBFDT */
+#endif
diff --git a/cpu/at32ap/at32ap7000/Makefile b/cpu/at32ap/at32ap700x/Makefile
index d276712..d276712 100644
--- a/cpu/at32ap/at32ap7000/Makefile
+++ b/cpu/at32ap/at32ap700x/Makefile
diff --git a/cpu/at32ap/at32ap7000/gpio.c b/cpu/at32ap/at32ap700x/gpio.c
index 52f5372..859124a 100644
--- a/cpu/at32ap/at32ap7000/gpio.c
+++ b/cpu/at32ap/at32ap700x/gpio.c
@@ -21,6 +21,7 @@
*/
#include <common.h>
+#include <asm/arch/chip-features.h>
#include <asm/arch/gpio.h>
/*
@@ -52,6 +53,7 @@ void gpio_enable_ebi(void)
#endif
}
+#ifdef AT32AP700x_CHIP_HAS_USART
void gpio_enable_usart0(void)
{
gpio_select_periph_B(GPIO_PIN_PA8, 0);
@@ -72,10 +74,12 @@ void gpio_enable_usart2(void)
void gpio_enable_usart3(void)
{
+ gpio_select_periph_B(GPIO_PIN_PB17, 0);
gpio_select_periph_B(GPIO_PIN_PB18, 0);
- gpio_select_periph_B(GPIO_PIN_PB19, 0);
}
+#endif
+#ifdef AT32AP700x_CHIP_HAS_MACB
void gpio_enable_macb0(void)
{
gpio_select_periph_A(GPIO_PIN_PC3, 0); /* TXD0 */
@@ -125,7 +129,9 @@ void gpio_enable_macb1(void)
gpio_select_periph_B(GPIO_PIN_PD15, 0); /* SPD */
#endif
}
+#endif
+#ifdef AT32AP700x_CHIP_HAS_MMCI
void gpio_enable_mmci(void)
{
gpio_select_periph_A(GPIO_PIN_PA10, 0); /* CLK */
@@ -135,3 +141,4 @@ void gpio_enable_mmci(void)
gpio_select_periph_A(GPIO_PIN_PA14, 0); /* DATA2 */
gpio_select_periph_A(GPIO_PIN_PA15, 0); /* DATA3 */
}
+#endif
diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c
index cf48be1..f59dfb5 100644
--- a/cpu/at32ap/atmel_mci.c
+++ b/cpu/at32ap/atmel_mci.c
@@ -198,11 +198,11 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
/* Put the device into Transfer state */
ret = mmc_cmd(MMC_CMD_SELECT_CARD, mmc_rca << 16, resp, R1 | NCR);
- if (ret) goto fail;
+ if (ret) goto out;
/* Set block length */
ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, R1 | NCR);
- if (ret) goto fail;
+ if (ret) goto out;
pr_debug("MCI_DTOR = %08lx\n", mmci_readl(DTOR));
@@ -211,7 +211,7 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
start * mmc_blkdev.blksz, resp,
(R1 | NCR | TRCMD_START | TRDIR_READ
| TRTYP_BLOCK));
- if (ret) goto fail;
+ if (ret) goto out;
ret = -EIO;
wordcount = 0;
@@ -219,7 +219,7 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
do {
status = mmci_readl(SR);
if (status & (ERROR_FLAGS | MMCI_BIT(OVRE)))
- goto fail;
+ goto read_error;
} while (!(status & MMCI_BIT(RXRDY)));
if (status & MMCI_BIT(RXRDY)) {
@@ -244,9 +244,10 @@ out:
mmc_cmd(MMC_CMD_SELECT_CARD, 0, resp, NCR);
return i;
-fail:
+read_error:
mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR);
- printf("mmc: bread failed, card status = %08x\n", card_status);
+ printf("mmc: bread failed, status = %08x, card status = %08x\n",
+ status, card_status);
goto out;
}
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index b2c35d3..f1ea17d 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -35,6 +35,7 @@
#include <ft_build.h>
#elif defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
+#include <fdt_support.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -526,7 +527,6 @@ ft_cpu_setup(void *blob, bd_t *bd)
int nodeoffset;
int err;
int j;
- int tmp[2];
for (j = 0; j < (sizeof(fixup_props) / sizeof(fixup_props[0])); j++) {
nodeoffset = fdt_path_offset(blob, fixup_props[j].node);
@@ -543,21 +543,7 @@ ft_cpu_setup(void *blob, bd_t *bd)
}
}
- /* update, or add and update /memory node */
- nodeoffset = fdt_path_offset(blob, "/memory");
- if (nodeoffset < 0) {
- nodeoffset = fdt_add_subnode(blob, 0, "memory");
- if (nodeoffset < 0)
- debug("failed to add /memory node: %s\n",
- fdt_strerror(nodeoffset));
- }
- if (nodeoffset >= 0) {
- fdt_setprop(blob, nodeoffset, "device_type",
- "memory", sizeof("memory"));
- tmp[0] = cpu_to_be32(bd->bi_memstart);
- tmp[1] = cpu_to_be32(bd->bi_memsize);
- fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp));
- }
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
}
#elif defined(CONFIG_OF_FLAT_TREE)
void
diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile
index 32091fa..d179d70 100644
--- a/cpu/mpc85xx/Makefile
+++ b/cpu/mpc85xx/Makefile
@@ -29,8 +29,10 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).a
START = start.o resetvec.o
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
- pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o qe_io.o
+ pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o qe_io.o \
+ $(COBJS-y)
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc85xx/commproc.c b/cpu/mpc85xx/commproc.c
index 3504d50..b0ecd25 100644
--- a/cpu/mpc85xx/commproc.c
+++ b/cpu/mpc85xx/commproc.c
@@ -37,7 +37,7 @@ DECLARE_GLOBAL_DATA_PTR;
void
m8560_cpm_reset(void)
{
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
volatile ulong count;
gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
@@ -50,11 +50,11 @@ m8560_cpm_reset(void)
/*
* Reset CPM
*/
- immr->im_cpm.im_cpm_cp.cpcr = CPM_CR_RST;
+ cpm->im_cpm_cp.cpcr = CPM_CR_RST;
count = 0;
do { /* Spin until command processed */
__asm__ __volatile__ ("eieio");
- } while ((immr->im_cpm.im_cpm_cp.cpcr & CPM_CR_FLG) && ++count < 1000000);
+ } while ((cpm->im_cpm_cp.cpcr & CPM_CR_FLG) && ++count < 1000000);
}
/* Allocate some memory from the dual ported ram.
@@ -64,7 +64,7 @@ m8560_cpm_reset(void)
uint
m8560_cpm_dpalloc(uint size, uint align)
{
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
uint retloc;
uint align_mask, off;
uint savebase;
@@ -86,7 +86,7 @@ m8560_cpm_dpalloc(uint size, uint align)
retloc = gd->dp_alloc_base;
gd->dp_alloc_base += size;
- memset((void *)&(immr->im_cpm.im_dprambase[retloc]), 0, size);
+ memset((void *)&(cpm->im_dprambase[retloc]), 0, size);
return(retloc);
}
@@ -120,16 +120,16 @@ m8560_cpm_hostalloc(uint size, uint align)
void
m8560_cpm_setbrg(uint brg, uint rate)
{
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
volatile uint *bp;
/* This is good enough to get SMCs running.....
*/
if (brg < 4) {
- bp = (uint *)&(immr->im_cpm.im_cpm_brg1.brgc1);
+ bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
}
else {
- bp = (uint *)&(immr->im_cpm.im_cpm_brg2.brgc5);
+ bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
brg -= 4;
}
bp += brg;
@@ -142,16 +142,16 @@ m8560_cpm_setbrg(uint brg, uint rate)
void
m8560_cpm_fastbrg(uint brg, uint rate, int div16)
{
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
volatile uint *bp;
/* This is good enough to get SMCs running.....
*/
if (brg < 4) {
- bp = (uint *)&(immr->im_cpm.im_cpm_brg1.brgc1);
+ bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
}
else {
- bp = (uint *)&(immr->im_cpm.im_cpm_brg2.brgc5);
+ bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
brg -= 4;
}
bp += brg;
@@ -167,14 +167,14 @@ m8560_cpm_fastbrg(uint brg, uint rate, int div16)
void
m8560_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
{
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
volatile uint *bp;
if (brg < 4) {
- bp = (uint *)&(immr->im_cpm.im_cpm_brg1.brgc1);
+ bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
}
else {
- bp = (uint *)&(immr->im_cpm.im_cpm_brg2.brgc5);
+ bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
brg -= 4;
}
bp += brg;
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index bbc5444..ac8b018 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -30,11 +30,6 @@
#include <command.h>
#include <asm/cache.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
-
-
int checkcpu (void)
{
sys_info_t sysinfo;
@@ -44,6 +39,8 @@ int checkcpu (void)
uint fam;
uint ver;
uint major, minor;
+ u32 ddr_ratio;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
svr = get_svr();
ver = SVR_VER(svr);
@@ -107,14 +104,25 @@ int checkcpu (void)
puts("Clock Configuration:\n");
printf(" CPU:%4lu MHz, ", sysinfo.freqProcessor / 1000000);
printf("CCB:%4lu MHz,\n", sysinfo.freqSystemBus / 1000000);
- printf(" DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000);
+
+ ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+ switch (ddr_ratio) {
+ case 0x0:
+ printf(" DDR:%4lu MHz, ", sysinfo.freqDDRBus / 2000000);
+ break;
+ case 0x7:
+ printf(" DDR:%4lu MHz (Synchronous), ", sysinfo.freqDDRBus / 2000000);
+ break;
+ default:
+ printf(" DDR:%4lu MHz (Asynchronous), ", sysinfo.freqDDRBus / 2000000);
+ break;
+ }
#if defined(CFG_LBC_LCRR)
lcrr = CFG_LBC_LCRR;
#else
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_lbc_t *lbc= &immap->im_lbc;
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
lcrr = lbc->lcrr;
}
@@ -214,8 +222,7 @@ reset_85xx_watchdog(void)
#if defined(CONFIG_DDR_ECC)
void dma_init(void) {
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_dma_t *dma = &immap->im_dma;
+ volatile ccsr_dma_t *dma = (void *)(CFG_MPC85xx_DMA_ADDR);
dma->satr0 = 0x02c40000;
dma->datr0 = 0x02c40000;
@@ -225,8 +232,7 @@ void dma_init(void) {
}
uint dma_check(void) {
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_dma_t *dma = &immap->im_dma;
+ volatile ccsr_dma_t *dma = (void *)(CFG_MPC85xx_DMA_ADDR);
volatile uint status = dma->sr0;
/* While the channel is busy, spin */
@@ -245,8 +251,7 @@ uint dma_check(void) {
}
int dma_xfer(void *dest, uint count, void *src) {
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_dma_t *dma = &immap->im_dma;
+ volatile ccsr_dma_t *dma = (void *)(CFG_MPC85xx_DMA_ADDR);
dma->dar0 = (uint) dest;
dma->sar0 = (uint) src;
@@ -258,94 +263,3 @@ int dma_xfer(void *dest, uint count, void *src) {
return dma_check();
}
#endif
-
-
-#ifdef CONFIG_OF_FLAT_TREE
-void
-ft_cpu_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- ulong clock;
- int len;
-
- clock = bd->bi_busfreq;
- p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
- if (p != NULL)
- *p = cpu_to_be32(clock);
-
- p = ft_get_prop(blob, "/qe@e0080000/" OF_CPU "/bus-frequency", &len);
- if (p != NULL)
- *p = cpu_to_be32(clock);
-
- p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len);
- if (p != NULL)
- *p = cpu_to_be32(clock);
-
- p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len);
- if (p != NULL)
- *p = cpu_to_be32(clock);
-
-#if defined(CONFIG_HAS_ETH0)
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
- if (p)
- memcpy(p, bd->bi_enetaddr, 6);
-
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len);
- if (p)
- memcpy(p, bd->bi_enetaddr, 6);
-#endif
-
-#if defined(CONFIG_HAS_ETH1)
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
- if (p)
- memcpy(p, bd->bi_enet1addr, 6);
-
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len);
- if (p)
- memcpy(p, bd->bi_enet1addr, 6);
-#endif
-
-#if defined(CONFIG_HAS_ETH2)
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
- if (p)
- memcpy(p, bd->bi_enet2addr, 6);
-
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len);
- if (p)
- memcpy(p, bd->bi_enet2addr, 6);
-
-#ifdef CONFIG_UEC_ETH
- p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/mac-address", &len);
- if (p)
- memcpy(p, bd->bi_enet2addr, 6);
-
- p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/local-mac-address", &len);
- if (p)
- memcpy(p, bd->bi_enet2addr, 6);
-
-#endif
-#endif
-
-#if defined(CONFIG_HAS_ETH3)
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
- if (p)
- memcpy(p, bd->bi_enet3addr, 6);
-
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len);
- if (p)
- memcpy(p, bd->bi_enet3addr, 6);
-
-#ifdef CONFIG_UEC_ETH
- p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/mac-address", &len);
- if (p)
- memcpy(p, bd->bi_enet3addr, 6);
-
- p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/local-mac-address", &len);
- if (p)
- memcpy(p, bd->bi_enet3addr, 6);
-
-#endif
-#endif
-
-}
-#endif
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index 79ad20c..fdb9ecb 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -59,7 +59,7 @@ static void config_qe_ioports(void)
#endif
#ifdef CONFIG_CPM2
-static void config_8560_ioports (volatile immap_t * immr)
+void config_8560_ioports (volatile ccsr_cpm_t * cpm)
{
int portnum;
@@ -99,7 +99,7 @@ static void config_8560_ioports (volatile immap_t * immr)
}
if (pmsk != 0) {
- volatile ioport_t *iop = ioport_addr (immr, portnum);
+ volatile ioport_t *iop = ioport_addr (cpm, portnum);
uint tpmsk = ~pmsk;
/*
@@ -131,8 +131,7 @@ static void config_8560_ioports (volatile immap_t * immr)
void cpu_init_f (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_lbc_t *memctl = &immap->im_lbc;
+ volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
extern void m8560_cpm_reset (void);
/* Pointer is writable since we allocated a register for it */
@@ -143,7 +142,7 @@ void cpu_init_f (void)
#ifdef CONFIG_CPM2
- config_8560_ioports(immap);
+ config_8560_ioports((ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR);
#endif
/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
@@ -222,18 +221,15 @@ void cpu_init_f (void)
int cpu_init_r(void)
{
-#if defined(CONFIG_CLEAR_LAW0) || defined(CONFIG_L2_CACHE)
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
-#endif
#ifdef CONFIG_CLEAR_LAW0
- volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm;
+ volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
/* clear alternate boot location LAW (used for sdram, or ddr bank) */
ecm->lawar0 = 0;
#endif
#if defined(CONFIG_L2_CACHE)
- volatile ccsr_l2cache_t *l2cache = &immap->im_l2cache;
+ volatile ccsr_l2cache_t *l2cache = (void *)CFG_MPC85xx_L2_ADDR;
volatile uint cache_ctl;
uint svr, ver;
uint l2srbar;
diff --git a/cpu/mpc85xx/ether_fcc.c b/cpu/mpc85xx/ether_fcc.c
index 5b23a80..bd62aab 100644
--- a/cpu/mpc85xx/ether_fcc.c
+++ b/cpu/mpc85xx/ether_fcc.c
@@ -230,8 +230,8 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
{
struct ether_fcc_info_s * info = dev->priv;
int i;
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
- volatile ccsr_cpm_cp_t *cp = &(immr->im_cpm.im_cpm_cp);
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
+ volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp);
fcc_enet_t *pram_ptr;
unsigned long mem_addr;
@@ -242,35 +242,35 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
/* 28.9 - (1-2): ioports have been set up already */
/* 28.9 - (3): connect FCC's tx and rx clocks */
- immr->im_cpm.im_cpm_mux.cmxuar = 0; /* ATM */
- immr->im_cpm.im_cpm_mux.cmxfcr = (immr->im_cpm.im_cpm_mux.cmxfcr & ~info->cmxfcr_mask) |
+ cpm->im_cpm_mux.cmxuar = 0; /* ATM */
+ cpm->im_cpm_mux.cmxfcr = (cpm->im_cpm_mux.cmxfcr & ~info->cmxfcr_mask) |
info->cmxfcr_value;
/* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, set Mode Ethernet */
if(info->ether_index == 0) {
- immr->im_cpm.im_cpm_fcc1.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
+ cpm->im_cpm_fcc1.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
} else if (info->ether_index == 1) {
- immr->im_cpm.im_cpm_fcc2.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
+ cpm->im_cpm_fcc2.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
} else if (info->ether_index == 2) {
- immr->im_cpm.im_cpm_fcc3.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
+ cpm->im_cpm_fcc3.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
}
/* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet,MII */
if(info->ether_index == 0) {
- immr->im_cpm.im_cpm_fcc1.fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
+ cpm->im_cpm_fcc1.fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
} else if (info->ether_index == 1){
- immr->im_cpm.im_cpm_fcc2.fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
+ cpm->im_cpm_fcc2.fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
} else if (info->ether_index == 2){
- immr->im_cpm.im_cpm_fcc3.fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
+ cpm->im_cpm_fcc3.fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
}
/* 28.9 - (6): FDSR: Ethernet Syn */
if(info->ether_index == 0) {
- immr->im_cpm.im_cpm_fcc1.fdsr = 0xD555;
+ cpm->im_cpm_fcc1.fdsr = 0xD555;
} else if (info->ether_index == 1) {
- immr->im_cpm.im_cpm_fcc2.fdsr = 0xD555;
+ cpm->im_cpm_fcc2.fdsr = 0xD555;
} else if (info->ether_index == 2) {
- immr->im_cpm.im_cpm_fcc3.fdsr = 0xD555;
+ cpm->im_cpm_fcc3.fdsr = 0xD555;
}
/* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */
@@ -296,7 +296,7 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
/* 28.9 - (7): initialize parameter ram */
- pram_ptr = (fcc_enet_t *)&(immr->im_cpm.im_dprambase[info->proff_enet]);
+ pram_ptr = (fcc_enet_t *)&(cpm->im_dprambase[info->proff_enet]);
/* clear whole structure to make sure all reserved fields are zero */
memset((void*)pram_ptr, 0, sizeof(fcc_enet_t));
@@ -385,14 +385,14 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
/* 28.9 - (8)(9): clear out events in FCCE */
/* 28.9 - (9): FCCM: mask all events */
if(info->ether_index == 0) {
- immr->im_cpm.im_cpm_fcc1.fcce = ~0x0;
- immr->im_cpm.im_cpm_fcc1.fccm = 0;
+ cpm->im_cpm_fcc1.fcce = ~0x0;
+ cpm->im_cpm_fcc1.fccm = 0;
} else if (info->ether_index == 1) {
- immr->im_cpm.im_cpm_fcc2.fcce = ~0x0;
- immr->im_cpm.im_cpm_fcc2.fccm = 0;
+ cpm->im_cpm_fcc2.fcce = ~0x0;
+ cpm->im_cpm_fcc2.fccm = 0;
} else if (info->ether_index == 2) {
- immr->im_cpm.im_cpm_fcc3.fcce = ~0x0;
- immr->im_cpm.im_cpm_fcc3.fccm = 0;
+ cpm->im_cpm_fcc3.fcce = ~0x0;
+ cpm->im_cpm_fcc3.fccm = 0;
}
/* 28.9 - (10-12): we don't use ethernet interrupts */
@@ -413,11 +413,11 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
/* 28.9 - (14): enable tx/rx in gfmr */
if(info->ether_index == 0) {
- immr->im_cpm.im_cpm_fcc1.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
+ cpm->im_cpm_fcc1.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
} else if (info->ether_index == 1) {
- immr->im_cpm.im_cpm_fcc2.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
+ cpm->im_cpm_fcc2.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
} else if (info->ether_index == 2) {
- immr->im_cpm.im_cpm_fcc3.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
+ cpm->im_cpm_fcc3.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
}
return 1;
@@ -426,15 +426,15 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
static void fec_halt(struct eth_device* dev)
{
struct ether_fcc_info_s * info = dev->priv;
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
/* write GFMR: disable tx/rx */
if(info->ether_index == 0) {
- immr->im_cpm.im_cpm_fcc1.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
+ cpm->im_cpm_fcc1.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
} else if(info->ether_index == 1) {
- immr->im_cpm.im_cpm_fcc2.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
+ cpm->im_cpm_fcc2.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
} else if(info->ether_index == 2) {
- immr->im_cpm.im_cpm_fcc3.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
+ cpm->im_cpm_fcc3.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
}
}
diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c
new file mode 100644
index 0000000..737a6c4
--- /dev/null
+++ b/cpu/mpc85xx/fdt.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
+ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
+ fdt_fixup_ethernet(blob, bd);
+#endif
+
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", bd->bi_busfreq / 8, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "clock-frequency", bd->bi_intfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+#ifdef CONFIG_QE
+ do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+#endif
+
+#ifdef CFG_NS16550
+ do_fixup_by_compat_u32(blob, "ns16550",
+ "clock-frequency", bd->bi_busfreq, 1);
+#endif
+
+#ifdef CONFIG_CPM2
+ do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
+ "current-speed", bd->bi_baudrate, 1);
+
+ do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
+ "clock-frequency", bd->bi_brgfreq, 1);
+#endif
+
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}
diff --git a/cpu/mpc85xx/interrupts.c b/cpu/mpc85xx/interrupts.c
index bf737d6..18e5377 100644
--- a/cpu/mpc85xx/interrupts.c
+++ b/cpu/mpc85xx/interrupts.c
@@ -80,19 +80,17 @@ int disable_interrupts (void)
int interrupt_init (void)
{
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile ccsr_pic_t *pic = (void *)(CFG_MPC85xx_PIC_ADDR);
- immr->im_pic.gcr = MPC85xx_PICGCR_RST;
- while (immr->im_pic.gcr & MPC85xx_PICGCR_RST);
- immr->im_pic.gcr = MPC85xx_PICGCR_M;
+ pic->gcr = MPC85xx_PICGCR_RST;
+ while (pic->gcr & MPC85xx_PICGCR_RST);
+ pic->gcr = MPC85xx_PICGCR_M;
decrementer_count = get_tbclk() / CFG_HZ;
mtspr(SPRN_TCR, TCR_PIE);
set_dec (decrementer_count);
set_msr (get_msr () | MSR_EE);
#ifdef CONFIG_INTERRUPTS
- volatile ccsr_pic_t *pic = &immr->im_pic;
-
pic->iivpr1 = 0x810002; /* 50220 enable ecm interrupts */
debug("iivpr1@%x = %x\n",&pic->iivpr1, pic->iivpr1);
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index db09e45..a5060cd 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -29,10 +29,6 @@
#include <asm/cpm_85xx.h>
#include <pci.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
-
#if defined(CONFIG_PCI)
static struct pci_controller *pci_hose;
@@ -43,12 +39,11 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
u16 reg16;
u32 dev;
- volatile immap_t *immap = (immap_t *)CFG_CCSRBAR;
- volatile ccsr_pcix_t *pcix = &immap->im_pcix;
+ volatile ccsr_pcix_t *pcix = (void *)(CFG_MPC85xx_PCIX_ADDR);
#ifdef CONFIG_MPC85XX_PCI2
- volatile ccsr_pcix_t *pcix2 = &immap->im_pcix2;
+ volatile ccsr_pcix_t *pcix2 = (void *)(CFG_MPC85xx_PCIX2_ADDR);
#endif
- volatile ccsr_gur_t *gur = &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
struct pci_controller * hose;
pci_hose = board_hose;
@@ -216,27 +211,4 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
hose->last_busno = pci_hose_scan(hose);
#endif
}
-
-#ifdef CONFIG_OF_FLAT_TREE
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
-
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len);
- if (p != NULL) {
- p[0] = pci_hose[0].first_busno;
- p[1] = pci_hose[0].last_busno;
- }
-
-#ifdef CONFIG_MPC85XX_PCI2
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@9000/bus-range", &len);
- if (p != NULL) {
- p[0] = pci_hose[1].first_busno;
- p[1] = pci_hose[1].last_busno;
- }
-#endif
-}
-#endif /* CONFIG_OF_FLAT_TREE */
#endif /* CONFIG_PCI */
diff --git a/cpu/mpc85xx/qe_io.c b/cpu/mpc85xx/qe_io.c
index 8878bc5..98075bb 100644
--- a/cpu/mpc85xx/qe_io.c
+++ b/cpu/mpc85xx/qe_io.c
@@ -34,9 +34,9 @@ void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
u32 pin_2bit_assign;
u32 pin_1bit_mask;
u32 tmp_val;
- volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
volatile par_io_t *par_io = (volatile par_io_t *)
- &(im->im_gur.qe_par_io);
+ &(gur->qe_par_io);
/* Caculate pin location and 2bit mask and dir */
pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
diff --git a/cpu/mpc85xx/serial_scc.c b/cpu/mpc85xx/serial_scc.c
index 4e925f8..7ee3cc8 100644
--- a/cpu/mpc85xx/serial_scc.c
+++ b/cpu/mpc85xx/serial_scc.c
@@ -88,17 +88,17 @@ DECLARE_GLOBAL_DATA_PTR;
int serial_init (void)
{
- volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
volatile ccsr_cpm_scc_t *sp;
volatile scc_uart_t *up;
volatile cbd_t *tbdf, *rbdf;
- volatile ccsr_cpm_cp_t *cp = &(im->im_cpm.im_cpm_cp);
+ volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp);
uint dpaddr;
/* initialize pointers to SCC */
- sp = (ccsr_cpm_scc_t *) &(im->im_cpm.im_cpm_scc[SCC_INDEX]);
- up = (scc_uart_t *)&(im->im_cpm.im_dprambase[PROFF_SCC]);
+ sp = (ccsr_cpm_scc_t *) &(cpm->im_cpm_scc[SCC_INDEX]);
+ up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
/* Disable transmitter/receiver.
*/
@@ -107,8 +107,8 @@ int serial_init (void)
/* put the SCC channel into NMSI (non multiplexd serial interface)
* mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
*/
- im->im_cpm.im_cpm_mux.cmxscr = \
- (im->im_cpm.im_cpm_mux.cmxscr&~CMXSCR_MASK)|CMXSCR_VALUE;
+ cpm->im_cpm_mux.cmxscr = \
+ (cpm->im_cpm_mux.cmxscr&~CMXSCR_MASK)|CMXSCR_VALUE;
/* Set up the baud rate generator.
*/
@@ -123,7 +123,7 @@ int serial_init (void)
/* Set the physical address of the host memory buffers in
* the buffer descriptors.
*/
- rbdf = (cbd_t *)&(im->im_cpm.im_dprambase[dpaddr]);
+ rbdf = (cbd_t *)&(cpm->im_dprambase[dpaddr]);
rbdf->cbd_bufaddr = (uint) (rbdf+2);
rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
tbdf = rbdf + 1;
@@ -201,14 +201,13 @@ serial_putc(const char c)
{
volatile scc_uart_t *up;
volatile cbd_t *tbdf;
- volatile immap_t *im;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
if (c == '\n')
serial_putc ('\r');
- im = (immap_t *)CFG_IMMR;
- up = (scc_uart_t *)&(im->im_cpm.im_dprambase[PROFF_SCC]);
- tbdf = (cbd_t *)&(im->im_cpm.im_dprambase[up->scc_genscc.scc_tbase]);
+ up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
+ tbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_tbase]);
/* Wait for last character to go.
*/
@@ -235,12 +234,11 @@ serial_getc(void)
{
volatile cbd_t *rbdf;
volatile scc_uart_t *up;
- volatile immap_t *im;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
unsigned char c;
- im = (immap_t *)CFG_IMMR;
- up = (scc_uart_t *)&(im->im_cpm.im_dprambase[PROFF_SCC]);
- rbdf = (cbd_t *)&(im->im_cpm.im_dprambase[up->scc_genscc.scc_rbase]);
+ up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
+ rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
/* Wait for character to show up.
*/
@@ -260,11 +258,10 @@ serial_tstc()
{
volatile cbd_t *rbdf;
volatile scc_uart_t *up;
- volatile immap_t *im;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
- im = (immap_t *)CFG_IMMR;
- up = (scc_uart_t *)&(im->im_cpm.im_dprambase[PROFF_SCC]);
- rbdf = (cbd_t *)&(im->im_cpm.im_dprambase[up->scc_genscc.scc_rbase]);
+ up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
+ rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
return ((rbdf->cbd_sc & BD_SC_EMPTY) == 0);
}
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index 5dc223a..553f736 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -53,8 +53,8 @@ picos_to_clk(int picos)
{
int clks;
- clks = picos / (2000000000 / (get_bus_freq(0) / 1000));
- if (picos % (2000000000 / (get_bus_freq(0) / 1000)) != 0) {
+ clks = picos / (2000000000 / (get_ddr_freq(0) / 1000));
+ if (picos % (2000000000 / (get_ddr_freq(0) / 1000)) != 0) {
clks++;
}
@@ -171,8 +171,7 @@ unsigned int determine_refresh_rate(unsigned int spd_refresh)
long int
spd_sdram(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_ddr_t *ddr = &immap->im_ddr;
+ volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR);
spd_eeprom_t spd;
unsigned int n_ranks;
unsigned int rank_density;
@@ -309,7 +308,7 @@ spd_sdram(void)
if ((SVR_VER(get_svr()) == SVR_8548_E) &&
(SVR_MJREV(get_svr()) == 1) &&
(spd.mem_type == SPD_MEMTYPE_DDR2)) {
- volatile ccsr_gur_t *gur = &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
gur->ddrioovcr = (0x80000000 /* Enable */
| 0x10000000);/* VSEL to 1.8V */
}
@@ -422,7 +421,7 @@ spd_sdram(void)
* Adjust the CAS Latency to allow for bus speeds that
* are slower than the DDR module.
*/
- busfreq = get_bus_freq(0) / 1000000; /* MHz */
+ busfreq = get_ddr_freq(0) / 1000000; /* MHz */
effective_data_rate = max_data_rate;
if (busfreq < 90) {
@@ -1023,8 +1022,7 @@ spd_sdram(void)
static unsigned int
setup_laws_and_tlbs(unsigned int memsize)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm;
+ volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
unsigned int tlb_size;
unsigned int law_size;
unsigned int ram_tlb_index;
@@ -1130,8 +1128,7 @@ ddr_enable_ecc(unsigned int dram_size)
{
uint *p = 0;
uint i = 0;
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+ volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
dma_init();
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index 12359a2..27de37a 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -35,8 +35,7 @@ DECLARE_GLOBAL_DATA_PTR;
void get_sys_info (sys_info_t * sysInfo)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
uint plat_ratio,e500_ratio,half_freqSystemBus;
plat_ratio = (gur->porpllsr) & 0x0000003e;
@@ -49,6 +48,15 @@ void get_sys_info (sys_info_t * sysInfo)
* overflow for processor speeds above 2GHz */
half_freqSystemBus = sysInfo->freqSystemBus/2;
sysInfo->freqProcessor = e500_ratio*half_freqSystemBus;
+ sysInfo->freqDDRBus = sysInfo->freqSystemBus;
+
+#ifdef CONFIG_DDR_CLK_FREQ
+ {
+ u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+ if (ddr_ratio != 0x7)
+ sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
+ }
+#endif
}
@@ -56,12 +64,12 @@ int get_clocks (void)
{
sys_info_t sys_info;
#if defined(CONFIG_CPM2)
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
uint sccr, dfbrg;
/* set VCO = 4 * BRG */
- immap->im_cpm.im_cpm_intctl.sccr &= 0xfffffffc;
- sccr = immap->im_cpm.im_cpm_intctl.sccr;
+ cpm->im_cpm_intctl.sccr &= 0xfffffffc;
+ sccr = cpm->im_cpm_intctl.sccr;
dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
#endif
get_sys_info (&sys_info);
@@ -94,3 +102,19 @@ ulong get_bus_freq (ulong dummy)
return val;
}
+
+/********************************************
+ * get_ddr_freq
+ * return ddr bus freq in Hz
+ *********************************************/
+ulong get_ddr_freq (ulong dummy)
+{
+ ulong val;
+
+ sys_info_t sys_info;
+
+ get_sys_info (&sys_info);
+ val = sys_info.freqDDRBus;
+
+ return val;
+}
diff --git a/cpu/mpc85xx/traps.c b/cpu/mpc85xx/traps.c
index efc80c7..2381fb0 100644
--- a/cpu/mpc85xx/traps.c
+++ b/cpu/mpc85xx/traps.c
@@ -288,8 +288,8 @@ UnknownException(struct pt_regs *regs)
void
ExtIntException(struct pt_regs *regs)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_pic_t *pic = &immap->im_pic;
+ volatile ccsr_pic_t *pic = (void *)(CFG_MPC85xx_PIC_ADDR);
+
uint vect;
#if defined(CONFIG_CMD_KGDB)
diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c
index 101d5f9..11b0893 100644
--- a/cpu/mpc8xx/speed.c
+++ b/cpu/mpc8xx/speed.c
@@ -259,11 +259,8 @@ int get_clocks_866 (void)
*/
sccr_reg = immr->im_clkrst.car_sccr;
sccr_reg &= ~SCCR_EBDF11;
-#if defined(CONFIG_TQM885D)
- if (gd->cpu_clk <= 80000000) {
-#else
+
if (gd->cpu_clk <= 66000000) {
-#endif
sccr_reg |= SCCR_EBDF00; /* bus division factor = 1 */
gd->bus_clk = gd->cpu_clk;
} else {
diff --git a/cpu/sh4/Makefile b/cpu/sh4/Makefile
new file mode 100644
index 0000000..1bb8bd7
--- /dev/null
+++ b/cpu/sh4/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+START = start.o
+OBJS = cpu.o interrupts.o watchdog.o time.o cache.o
+
+all: .depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/sh4/cache.c b/cpu/sh4/cache.c
new file mode 100644
index 0000000..4e744d7
--- /dev/null
+++ b/cpu/sh4/cache.c
@@ -0,0 +1,108 @@
+/*
+ * (C) Copyright 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+/*
+ * Jump to P2 area.
+ * When handling TLB or caches, we need to do it from P2 area.
+ */
+#define jump_to_P2() \
+ do { \
+ unsigned long __dummy; \
+ __asm__ __volatile__( \
+ "mov.l 1f, %0\n\t" \
+ "or %1, %0\n\t" \
+ "jmp @%0\n\t" \
+ " nop\n\t" \
+ ".balign 4\n" \
+ "1: .long 2f\n" \
+ "2:" \
+ : "=&r" (__dummy) \
+ : "r" (0x20000000)); \
+ } while (0)
+
+/*
+ * Back to P1 area.
+ */
+#define back_to_P1() \
+ do { \
+ unsigned long __dummy; \
+ __asm__ __volatile__( \
+ "nop;nop;nop;nop;nop;nop;nop\n\t" \
+ "mov.l 1f, %0\n\t" \
+ "jmp @%0\n\t" \
+ " nop\n\t" \
+ ".balign 4\n" \
+ "1: .long 2f\n" \
+ "2:" \
+ : "=&r" (__dummy)); \
+ } while (0)
+
+#define CACHE_VALID 1
+#define CACHE_UPDATED 2
+
+static inline void cache_wback_all(void)
+{
+ unsigned long addr, data, i, j;
+
+ jump_to_P2();
+ for (i = 0; i < CACHE_OC_NUM_ENTRIES; i++){
+ for (j = 0; j < CACHE_OC_NUM_WAYS; j++) {
+ addr = CACHE_OC_ADDRESS_ARRAY | (j << CACHE_OC_WAY_SHIFT)
+ | (i << CACHE_OC_ENTRY_SHIFT);
+ data = inl(addr);
+ if (data & CACHE_UPDATED) {
+ data &= ~CACHE_UPDATED;
+ outl(data, addr);
+ }
+ }
+ }
+ back_to_P1();
+}
+
+
+#define CACHE_ENABLE 0
+#define CACHE_DISABLE 1
+
+int cache_control(unsigned int cmd)
+{
+ unsigned long ccr;
+
+ jump_to_P2();
+ ccr = inl(CCR);
+
+ if (ccr & CCR_CACHE_ENABLE)
+ cache_wback_all();
+
+ if (cmd == CACHE_DISABLE)
+ outl(CCR_CACHE_STOP, CCR);
+ else
+ outl(CCR_CACHE_INIT, CCR);
+ back_to_P1();
+
+ return 0;
+}
diff --git a/cpu/sh4/config.mk b/cpu/sh4/config.mk
new file mode 100644
index 0000000..b3feb2a
--- /dev/null
+++ b/cpu/sh4/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+PLATFORM_CPPFLAGS += -m4-nofpu
+PLATFORM_RELFLAGS += -ffixed-r13
diff --git a/cpu/sh4/cpu.c b/cpu/sh4/cpu.c
new file mode 100644
index 0000000..0ebf951
--- /dev/null
+++ b/cpu/sh4/cpu.c
@@ -0,0 +1,83 @@
+/*
+ * (C) Copyright 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+
+int checkcpu(void)
+{
+ puts("CPU: SH4\n");
+ return 0;
+}
+
+int cpu_init (void)
+{
+ return 0;
+}
+
+int cleanup_before_linux (void)
+{
+ disable_interrupts();
+ return 0;
+}
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ disable_interrupts();
+ reset_cpu (0);
+ return 0;
+}
+
+void flush_cache (unsigned long addr, unsigned long size)
+{
+
+}
+
+void icache_enable (void)
+{
+ cache_control(0);
+}
+
+void icache_disable (void)
+{
+ cache_control(1);
+}
+
+int icache_status (void)
+{
+ return 0;
+}
+
+void dcache_enable (void)
+{
+}
+
+void dcache_disable (void)
+{
+}
+
+int dcache_status (void)
+{
+ return 0;
+}
diff --git a/cpu/sh4/interrupts.c b/cpu/sh4/interrupts.c
new file mode 100644
index 0000000..6988ecc
--- /dev/null
+++ b/cpu/sh4/interrupts.c
@@ -0,0 +1,38 @@
+/*
+ * (C) Copyright 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+int interrupt_init (void)
+{
+ return 0;
+}
+
+void enable_interrupts (void)
+{
+
+}
+
+int disable_interrupts (void){
+ return 0;
+}
diff --git a/cpu/sh4/start.S b/cpu/sh4/start.S
new file mode 100644
index 0000000..a68ebb8
--- /dev/null
+++ b/cpu/sh4/start.S
@@ -0,0 +1,74 @@
+/*
+ * (C) Copyright 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+ .text
+ .align 2
+
+ .global _start
+_start:
+ mov.l ._lowlevel_init, r0
+100: bsrf r0
+ nop
+
+ bsr 1f
+ nop
+1: sts pr, r5
+ mov.l ._reloc_dst, r4
+ add #(_start-1b), r5
+ mov.l ._reloc_dst_end, r6
+
+2: mov.l @r5+, r1
+ mov.l r1, @r4
+ add #4, r4
+ cmp/hs r6, r4
+ bf 2b
+
+ mov.l ._bss_start, r4
+ mov.l ._bss_end, r5
+ mov #0, r1
+
+3: mov.l r1, @r4 /* bss clear */
+ add #4, r4
+ cmp/hs r5, r4
+ bf 3b
+
+ mov.l ._gd_init, r13 /* global data */
+ mov.l ._stack_init, r15 /* stack */
+
+ mov.l ._sh_generic_init, r0
+ jsr @r0
+ nop
+
+loop:
+ bra loop
+
+ .align 2
+
+._lowlevel_init: .long (lowlevel_init - (100b + 4))
+._reloc_dst: .long reloc_dst
+._reloc_dst_end: .long reloc_dst_end
+._bss_start: .long bss_start
+._bss_end: .long bss_end
+._gd_init: .long (_start - CFG_GBL_DATA_SIZE)
+._stack_init: .long (_start - CFG_GBL_DATA_SIZE - CFG_MALLOC_LEN - 16)
+._sh_generic_init: .long sh_generic_init
diff --git a/cpu/sh4/time.c b/cpu/sh4/time.c
new file mode 100644
index 0000000..5f8a3a0
--- /dev/null
+++ b/cpu/sh4/time.c
@@ -0,0 +1,98 @@
+/*
+ * (C) Copyright 2007
+ * Nobobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+#define TMU_MAX_COUNTER (~0UL)
+
+static void tmu_timer_start (unsigned int timer)
+{
+ if (timer > 2)
+ return;
+
+ *((volatile unsigned char *) TSTR) |= (1 << timer);
+}
+
+static void tmu_timer_stop (unsigned int timer)
+{
+ u8 val = *((volatile u8 *)TSTR);
+ if (timer > 2)
+ return;
+ *((volatile unsigned char *)TSTR) = val &~(1 << timer);
+}
+
+int timer_init (void)
+{
+ /* Divide clock by 4 */
+ *(volatile u16 *)TCR0 = 0;
+
+ tmu_timer_stop(0);
+ tmu_timer_start(0);
+ return 0;
+}
+
+/*
+ In theory we should return a true 64bit value (ie something that doesn't
+ overflow). However, we don't. Therefore if TMU runs at fastest rate of
+ 6.75 MHz this value will wrap after u-boot has been running for approx
+ 10 minutes.
+*/
+unsigned long long get_ticks (void)
+{
+ return (0 - *((volatile u32 *) TCNT0));
+}
+
+unsigned long get_timer (unsigned long base)
+{
+ return ((0 - *((volatile u32 *) TCNT0)) - base);
+}
+
+void set_timer (unsigned long t)
+{
+ *((volatile unsigned int *) TCNT0) = (0 - t);
+}
+
+void reset_timer (void)
+{
+ tmu_timer_stop(0);
+ set_timer (0);
+ tmu_timer_start(0);
+}
+
+void udelay (unsigned long usec)
+{
+ unsigned int start = get_timer (0);
+ unsigned int end = start + (usec * ((CFG_HZ + 500000) / 1000000));
+
+ while (get_timer (0) < end)
+ continue;
+}
+
+unsigned long get_tbclk (void)
+{
+ return CFG_HZ;
+}
diff --git a/cpu/sh4/watchdog.c b/cpu/sh4/watchdog.c
new file mode 100644
index 0000000..346e217
--- /dev/null
+++ b/cpu/sh4/watchdog.c
@@ -0,0 +1,50 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+#define WDT_BASE WTCNT
+
+static unsigned char cnt_read (void){
+ return *((volatile unsigned char *)(WDT_BASE + 0x00));
+}
+
+static unsigned char csr_read (void){
+ return *((volatile unsigned char *)(WDT_BASE + 0x04));
+}
+
+static void cnt_write (unsigned char value){
+ while (csr_read() & (1 << 5)) {
+ /* delay */
+ }
+ *((volatile unsigned short *)(WDT_BASE + 0x00))
+ = ((unsigned short) value) | 0x5A00;
+}
+
+static void csr_write (unsigned char value){
+ *((volatile unsigned short *)(WDT_BASE + 0x04))
+ = ((unsigned short) value) | 0xA500;
+}
+
+
+int watchdog_init (void){ return 0; }
+
+void reset_cpu (unsigned long ignored)
+{
+ while(1);
+}
diff --git a/doc/README.marubun-pcmcia b/doc/README.marubun-pcmcia
new file mode 100644
index 0000000..3ed5cd3
--- /dev/null
+++ b/doc/README.marubun-pcmcia
@@ -0,0 +1,65 @@
+
+U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
+ Last update 21/11/2007 by Nobuhiro Iwamatsu
+
+========================================================================================
+
+0. What's this?
+ This driver supports MARUBUN MR-SHPC-01.
+ url: http://www.marubun.co.jp/product/semicon/devices/qgc18e0000002n2z.html
+ (Sorry Japanese only.)
+
+ This chip is used with SuperH well, and adopted by the
+ reference board.
+ ex. * MS7750SE01
+ * MS7722SE01
+ * other
+
+ This chip doesn't support CardBus.
+
+1. base source code
+ The code is based on sources from the Linux kernel
+ ( arch/sh/kernel/cf-enabler.c ).
+
+2. How to use
+ The options you have to specify in the config file are (with the
+ value for my board as an example):
+
+ * CONFIG_MARUBUN_PCCARD
+ If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD.
+ ex. #define CONFIG_MARUBUN_PCCARD
+
+ * CONFIG_PCMCIA_SLOT_A
+ Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
+ ex. #define CONFIG_PCMCIA_SLOT_A 1
+
+ * CFG_MARUBUN_MRSHPC
+ This is MR-SHPC-01 PCMCIA controler base address.
+ You should do the setting matched to your environment.
+ ex. #define CFG_MARUBUN_MRSHPC 0xb03fffe0
+ ( for MS7722SE01 environment )
+
+ * CFG_MARUBUN_MW1
+ This is MR-SHPC-01 memory window base address.
+ You should do the setting matched to your environment.
+ ex. #define CFG_MARUBUN_MW1 0xb0400000
+ ( for MS7722SE01 environment )
+
+ * CFG_MARUBUN_MW1
+ This is MR-SHPC-01 attribute window base address.
+ You should do the setting matched to your environment.
+ ex. #define CFG_MARUBUN_MW2 0xb0500000
+ ( for MS7722SE01 environment )
+
+ * CFG_MARUBUN_MW1
+ This is MR-SHPC-01 I/O window base address.
+ You should do the setting matched to your environment.
+ ex. #define CFG_MARUBUN_IO 0xb0600000
+ ( for MS7722SE01 environment )
+
+3. Other
+ * Check Compact Flash only.
+ * Maybe, NE2000 compatible NIC is sure to move.
+
+Copyright (c) 2007
+ Nobuhiro Iwamatsu <iwamatsu@nigaur.org>
diff --git a/doc/README.sh b/doc/README.sh
new file mode 100644
index 0000000..075d360
--- /dev/null
+++ b/doc/README.sh
@@ -0,0 +1,61 @@
+
+U-Boot for Renesas SuperH
+ Last update 08/10/2007 by Nobuhiro Iwamatsu
+
+================================================================================
+0. What's this?
+ This file contains status information for the port of U-Boot to the
+ Renesas SuperH series of CPUs.
+
+================================================================================
+1. Overview
+ SuperH has an original boot loader. However, source code is dirty, and
+ maintenance is not done.
+ To improve sharing and the maintenance of the code, Nobuhiro Iwamatsu
+ started the porting to u-boot in 2007.
+
+================================================================================
+2. Supported CPUs
+
+ 2.1. Renesas SH7750/SH7750R
+ 2.2. Renesas SH7722
+
+================================================================================
+3. Supported Boards
+
+ 3.1. Hitachi UL MS7750SE01/MS7750RSE01
+ Board specific code is in board/ms7750se
+ To use this board, type "make ms7750se_config".
+
+ 3.2. Hitachi UL MS7722SE01
+ Board specific code is in board/ms7722se
+ To use this board, type "make ms7722se_config".
+
+ ** README **
+ In SuperH, S-record and binary of made u-boot work on the memory.
+ When u-boot is written in the flash, it is necessary to change the
+ address by using 'objcopy'.
+ ex) shX-linux-objcopy -Ibinary -Osrec u-boot.bin u-boot.flash.srec
+
+================================================================================
+4. Compiler
+ You can use the following of u-boot to compile.
+ - SuperH Linux Open site
+ http://www.superh-linux.org/
+ - KPIT GNU tools
+ http://www.kpitgnutools.com/
+
+================================================================================
+5. Future
+ I plan to support the following CPUs and boards.
+ 5.1. CPUs
+ - SH7710/SH7712 (SH3)
+ - SH7780(SH4)
+ - SH7785(SH4)
+
+ 5.2. Boards
+ - Many boards ;-)
+
+================================================================================
+Copyright (c) 2007
+ Nobuhiro Iwamatsu <iwamatsu@nigaur.org>
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 95c5e02..952e919 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -29,6 +29,7 @@ COBJS-y += at45.o
COBJS-y += cfi_flash.o
COBJS-y += dataflash.o
COBJS-y += mw_eeprom.o
+COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 5579a1e..f370e4f 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -42,9 +42,12 @@
#ifdef CFG_FLASH_CFI_DRIVER
/*
- * This file implements a Common Flash Interface (CFI) driver for U-Boot.
- * The width of the port and the width of the chips are determined at initialization.
- * These widths are used to calculate the address for access CFI data structures.
+ * This file implements a Common Flash Interface (CFI) driver for
+ * U-Boot.
+ *
+ * The width of the port and the width of the chips are determined at
+ * initialization. These widths are used to calculate the address for
+ * access CFI data structures.
*
* References
* JEDEC Standard JESD68 - Common Flash Interface (CFI)
@@ -55,7 +58,7 @@
* AMD/Spansion Application Note: Migration from Single-byte to Three-byte
* Device IDs, Publication Number 25538 Revision A, November 8, 2001
*
- * define CFG_WRITE_SWAPPED_DATA, if you have to swap the Bytes between
+ * Define CFG_WRITE_SWAPPED_DATA, if you have to swap the Bytes between
* reading and writing ... (yes there is such a Hardware).
*/
@@ -98,10 +101,6 @@
#define AMD_STATUS_TOGGLE 0x40
#define AMD_STATUS_ERROR 0x20
-#define AMD_ADDR_ERASE_START ((info->portwidth == FLASH_CFI_8BIT) ? 0xAAA : 0x555)
-#define AMD_ADDR_START ((info->portwidth == FLASH_CFI_8BIT) ? 0xAAA : 0x555)
-#define AMD_ADDR_ACK ((info->portwidth == FLASH_CFI_8BIT) ? 0x555 : 0x2AA)
-
#define FLASH_OFFSET_MANUFACTURER_ID 0x00
#define FLASH_OFFSET_DEVICE_ID 0x01
#define FLASH_OFFSET_DEVICE_ID2 0x0E
@@ -110,7 +109,8 @@
#define FLASH_OFFSET_CFI_ALT 0x555
#define FLASH_OFFSET_CFI_RESP 0x10
#define FLASH_OFFSET_PRIMARY_VENDOR 0x13
-#define FLASH_OFFSET_EXT_QUERY_T_P_ADDR 0x15 /* extended query table primary addr */
+/* extended query table primary address */
+#define FLASH_OFFSET_EXT_QUERY_T_P_ADDR 0x15
#define FLASH_OFFSET_WTOUT 0x1F
#define FLASH_OFFSET_WBTOUT 0x20
#define FLASH_OFFSET_ETOUT 0x21
@@ -149,16 +149,9 @@ typedef union {
unsigned long long ll;
} cfiword_t;
-typedef union {
- volatile unsigned char *cp;
- volatile unsigned short *wp;
- volatile unsigned long *lp;
- volatile unsigned long long *llp;
-} cfiptr_t;
-
#define NUM_ERASE_REGIONS 4 /* max. number of erase regions */
-static uint flash_offset_cfi[2]={FLASH_OFFSET_CFI,FLASH_OFFSET_CFI_ALT};
+static uint flash_offset_cfi[2] = { FLASH_OFFSET_CFI, FLASH_OFFSET_CFI_ALT };
/* use CFG_MAX_FLASH_BANKS_DETECT if defined */
#ifdef CFG_MAX_FLASH_BANKS_DETECT
@@ -176,46 +169,151 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* FLASH chips info */
#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
#endif
+typedef unsigned long flash_sect_t;
+
+/* CFI standard query structure */
+struct cfi_qry {
+ u8 qry[3];
+ u16 p_id;
+ u16 p_adr;
+ u16 a_id;
+ u16 a_adr;
+ u8 vcc_min;
+ u8 vcc_max;
+ u8 vpp_min;
+ u8 vpp_max;
+ u8 word_write_timeout_typ;
+ u8 buf_write_timeout_typ;
+ u8 block_erase_timeout_typ;
+ u8 chip_erase_timeout_typ;
+ u8 word_write_timeout_max;
+ u8 buf_write_timeout_max;
+ u8 block_erase_timeout_max;
+ u8 chip_erase_timeout_max;
+ u8 dev_size;
+ u16 interface_desc;
+ u16 max_buf_write_size;
+ u8 num_erase_regions;
+ u32 erase_region_info[NUM_ERASE_REGIONS];
+} __attribute__((packed));
+
+struct cfi_pri_hdr {
+ u8 pri[3];
+ u8 major_version;
+ u8 minor_version;
+} __attribute__((packed));
+
+static void flash_write8(u8 value, void *addr)
+{
+ __raw_writeb(value, addr);
+}
+
+static void flash_write16(u16 value, void *addr)
+{
+ __raw_writew(value, addr);
+}
+
+static void flash_write32(u32 value, void *addr)
+{
+ __raw_writel(value, addr);
+}
+
+static void flash_write64(u64 value, void *addr)
+{
+ /* No architectures currently implement __raw_writeq() */
+ *(volatile u64 *)addr = value;
+}
+
+static u8 flash_read8(void *addr)
+{
+ return __raw_readb(addr);
+}
+
+static u16 flash_read16(void *addr)
+{
+ return __raw_readw(addr);
+}
+
+static u32 flash_read32(void *addr)
+{
+ return __raw_readl(addr);
+}
+
+static u64 flash_read64(void *addr)
+{
+ /* No architectures currently implement __raw_readq() */
+ return *(volatile u64 *)addr;
+}
/*-----------------------------------------------------------------------
- * Functions
*/
+#if defined(CFG_ENV_IS_IN_FLASH) || defined(CFG_ENV_ADDR_REDUND) || (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+static flash_info_t *flash_get_info(ulong base)
+{
+ int i;
+ flash_info_t * info = 0;
-typedef unsigned long flash_sect_t;
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ info = & flash_info[i];
+ if (info->size && info->start[0] <= base &&
+ base <= info->start[0] + info->size - 1)
+ break;
+ }
-static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c);
-static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf);
-static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
-static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect);
-static int flash_isequal (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
-static int flash_isset (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
-static int flash_toggle (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
-static void flash_read_jedec_ids (flash_info_t * info);
-static int flash_detect_cfi (flash_info_t * info);
-static int flash_write_cfiword (flash_info_t * info, ulong dest, cfiword_t cword);
-static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
- ulong tout, char *prompt);
-ulong flash_get_size (ulong base, int banknum);
-#if defined(CFG_ENV_IS_IN_FLASH) || defined(CFG_ENV_ADDR_REDUND) || (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
-static flash_info_t *flash_get_info(ulong base);
-#endif
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
-static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp, int len);
+ return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+}
#endif
+unsigned long flash_sector_size(flash_info_t *info, flash_sect_t sect)
+{
+ if (sect != (info->sector_count - 1))
+ return info->start[sect + 1] - info->start[sect];
+ else
+ return info->start[0] + info->size - info->start[sect];
+}
+
/*-----------------------------------------------------------------------
* create an address based on the offset and the port width
*/
-inline uchar *flash_make_addr (flash_info_t * info, flash_sect_t sect, uint offset)
+static inline void *
+flash_map (flash_info_t * info, flash_sect_t sect, uint offset)
{
- return ((uchar *) (info->start[sect] + (offset * info->portwidth)));
+ unsigned int byte_offset = offset * info->portwidth;
+
+ return map_physmem(info->start[sect] + byte_offset,
+ flash_sector_size(info, sect) - byte_offset,
+ MAP_NOCACHE);
+}
+
+static inline void flash_unmap(flash_info_t *info, flash_sect_t sect,
+ unsigned int offset, void *addr)
+{
+ unsigned int byte_offset = offset * info->portwidth;
+
+ unmap_physmem(addr, flash_sector_size(info, sect) - byte_offset);
+}
+
+/*-----------------------------------------------------------------------
+ * make a proper sized command based on the port and chip widths
+ */
+static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf)
+{
+ int i;
+ uchar *cp = (uchar *) cmdbuf;
+
+#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+ for (i = info->portwidth; i > 0; i--)
+#else
+ for (i = 1; i <= info->portwidth; i++)
+#endif
+ *cp++ = (i & (info->chipwidth - 1)) ? '\0' : cmd;
}
#ifdef DEBUG
/*-----------------------------------------------------------------------
* Debug support
*/
-void print_longlong (char *str, unsigned long long data)
+static void print_longlong (char *str, unsigned long long data)
{
int i;
char *cp;
@@ -224,28 +322,25 @@ void print_longlong (char *str, unsigned long long data)
for (i = 0; i < 8; i++)
sprintf (&str[i * 2], "%2.2x", *cp++);
}
-static void flash_printqry (flash_info_t * info, flash_sect_t sect)
+
+static void flash_printqry (struct cfi_qry *qry)
{
- cfiptr_t cptr;
+ u8 *p = (u8 *)qry;
int x, y;
- for (x = 0; x < 0x40; x += 16U / info->portwidth) {
- cptr.cp =
- flash_make_addr (info, sect,
- x + FLASH_OFFSET_CFI_RESP);
- debug ("%p : ", cptr.cp);
+ for (x = 0; x < sizeof(struct cfi_qry); x += 16) {
+ debug("%02x : ", x);
+ for (y = 0; y < 16; y++)
+ debug("%2.2x ", p[x + y]);
+ debug(" ");
for (y = 0; y < 16; y++) {
- debug ("%2.2x ", cptr.cp[y]);
- }
- debug (" ");
- for (y = 0; y < 16; y++) {
- if (cptr.cp[y] >= 0x20 && cptr.cp[y] <= 0x7e) {
- debug ("%c", cptr.cp[y]);
- } else {
- debug (".");
- }
+ unsigned char c = p[x + y];
+ if (c >= 0x20 && c <= 0x7e)
+ debug("%c", c);
+ else
+ debug(".");
}
- debug ("\n");
+ debug("\n");
}
}
#endif
@@ -254,192 +349,608 @@ static void flash_printqry (flash_info_t * info, flash_sect_t sect)
/*-----------------------------------------------------------------------
* read a character at a port width address
*/
-inline uchar flash_read_uchar (flash_info_t * info, uint offset)
+static inline uchar flash_read_uchar (flash_info_t * info, uint offset)
{
uchar *cp;
+ uchar retval;
- cp = flash_make_addr (info, 0, offset);
+ cp = flash_map (info, 0, offset);
#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
- return (cp[0]);
+ retval = flash_read8(cp);
#else
- return (cp[info->portwidth - 1]);
+ retval = flash_read8(cp + info->portwidth - 1);
#endif
+ flash_unmap (info, 0, offset, cp);
+ return retval;
}
/*-----------------------------------------------------------------------
- * read a short word by swapping for ppc format.
+ * read a long word by picking the least significant byte of each maximum
+ * port size word. Swap for ppc format.
*/
-ushort flash_read_ushort (flash_info_t * info, flash_sect_t sect, uint offset)
+static ulong flash_read_long (flash_info_t * info, flash_sect_t sect,
+ uint offset)
{
uchar *addr;
- ushort retval;
+ ulong retval;
#ifdef DEBUG
int x;
#endif
- addr = flash_make_addr (info, sect, offset);
+ addr = flash_map (info, sect, offset);
#ifdef DEBUG
- debug ("ushort addr is at %p info->portwidth = %d\n", addr,
+ debug ("long addr is at %p info->portwidth = %d\n", addr,
info->portwidth);
- for (x = 0; x < 2 * info->portwidth; x++) {
- debug ("addr[%x] = 0x%x\n", x, addr[x]);
+ for (x = 0; x < 4 * info->portwidth; x++) {
+ debug ("addr[%x] = 0x%x\n", x, flash_read8(addr + x));
}
#endif
#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
- retval = ((addr[(info->portwidth)] << 8) | addr[0]);
+ retval = ((flash_read8(addr) << 16) |
+ (flash_read8(addr + info->portwidth) << 24) |
+ (flash_read8(addr + 2 * info->portwidth)) |
+ (flash_read8(addr + 3 * info->portwidth) << 8));
#else
- retval = ((addr[(2 * info->portwidth) - 1] << 8) |
- addr[info->portwidth - 1]);
+ retval = ((flash_read8(addr + 2 * info->portwidth - 1) << 24) |
+ (flash_read8(addr + info->portwidth - 1) << 16) |
+ (flash_read8(addr + 4 * info->portwidth - 1) << 8) |
+ (flash_read8(addr + 3 * info->portwidth - 1)));
#endif
+ flash_unmap(info, sect, offset, addr);
- debug ("retval = 0x%x\n", retval);
return retval;
}
-/*-----------------------------------------------------------------------
- * read a long word by picking the least significant byte of each maximum
- * port size word. Swap for ppc format.
+/*
+ * Write a proper sized command to the correct address
*/
-ulong flash_read_long (flash_info_t * info, flash_sect_t sect, uint offset)
+static void flash_write_cmd (flash_info_t * info, flash_sect_t sect,
+ uint offset, uchar cmd)
{
- uchar *addr;
- ulong retval;
+ void *addr;
+ cfiword_t cword;
+
+ addr = flash_map (info, sect, offset);
+ flash_make_cmd (info, cmd, &cword);
+ switch (info->portwidth) {
+ case FLASH_CFI_8BIT:
+ debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", addr, cmd,
+ cword.c, info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+ flash_write8(cword.c, addr);
+ break;
+ case FLASH_CFI_16BIT:
+ debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", addr,
+ cmd, cword.w,
+ info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+ flash_write16(cword.w, addr);
+ break;
+ case FLASH_CFI_32BIT:
+ debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", addr,
+ cmd, cword.l,
+ info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+ flash_write32(cword.l, addr);
+ break;
+ case FLASH_CFI_64BIT:
#ifdef DEBUG
- int x;
+ {
+ char str[20];
+
+ print_longlong (str, cword.ll);
+
+ debug ("fwrite addr %p cmd %x %s 64 bit x %d bit\n",
+ addr, cmd, str,
+ info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+ }
#endif
- addr = flash_make_addr (info, sect, offset);
+ flash_write64(cword.ll, addr);
+ break;
+ }
+
+ /* Ensure all the instructions are fully finished */
+ sync();
+
+ flash_unmap(info, sect, offset, addr);
+}
+static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect)
+{
+ flash_write_cmd (info, sect, info->addr_unlock1, AMD_CMD_UNLOCK_START);
+ flash_write_cmd (info, sect, info->addr_unlock2, AMD_CMD_UNLOCK_ACK);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static int flash_isequal (flash_info_t * info, flash_sect_t sect,
+ uint offset, uchar cmd)
+{
+ void *addr;
+ cfiword_t cword;
+ int retval;
+
+ addr = flash_map (info, sect, offset);
+ flash_make_cmd (info, cmd, &cword);
+
+ debug ("is= cmd %x(%c) addr %p ", cmd, cmd, addr);
+ switch (info->portwidth) {
+ case FLASH_CFI_8BIT:
+ debug ("is= %x %x\n", flash_read8(addr), cword.c);
+ retval = (flash_read8(addr) == cword.c);
+ break;
+ case FLASH_CFI_16BIT:
+ debug ("is= %4.4x %4.4x\n", flash_read16(addr), cword.w);
+ retval = (flash_read16(addr) == cword.w);
+ break;
+ case FLASH_CFI_32BIT:
+ debug ("is= %8.8lx %8.8lx\n", flash_read32(addr), cword.l);
+ retval = (flash_read32(addr) == cword.l);
+ break;
+ case FLASH_CFI_64BIT:
#ifdef DEBUG
- debug ("long addr is at %p info->portwidth = %d\n", addr,
- info->portwidth);
- for (x = 0; x < 4 * info->portwidth; x++) {
- debug ("addr[%x] = 0x%x\n", x, addr[x]);
- }
-#endif
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
- retval = (addr[0] << 16) | (addr[(info->portwidth)] << 24) |
- (addr[(2 * info->portwidth)]) | (addr[(3 * info->portwidth)] << 8);
-#else
- retval = (addr[(2 * info->portwidth) - 1] << 24) |
- (addr[(info->portwidth) - 1] << 16) |
- (addr[(4 * info->portwidth) - 1] << 8) |
- addr[(3 * info->portwidth) - 1];
+ {
+ char str1[20];
+ char str2[20];
+
+ print_longlong (str1, flash_read64(addr));
+ print_longlong (str2, cword.ll);
+ debug ("is= %s %s\n", str1, str2);
+ }
#endif
+ retval = (flash_read64(addr) == cword.ll);
+ break;
+ default:
+ retval = 0;
+ break;
+ }
+ flash_unmap(info, sect, offset, addr);
+
return retval;
}
+/*-----------------------------------------------------------------------
+ */
+static int flash_isset (flash_info_t * info, flash_sect_t sect,
+ uint offset, uchar cmd)
+{
+ void *addr;
+ cfiword_t cword;
+ int retval;
+
+ addr = flash_map (info, sect, offset);
+ flash_make_cmd (info, cmd, &cword);
+ switch (info->portwidth) {
+ case FLASH_CFI_8BIT:
+ retval = ((flash_read8(addr) & cword.c) == cword.c);
+ break;
+ case FLASH_CFI_16BIT:
+ retval = ((flash_read16(addr) & cword.w) == cword.w);
+ break;
+ case FLASH_CFI_32BIT:
+ retval = ((flash_read16(addr) & cword.l) == cword.l);
+ break;
+ case FLASH_CFI_64BIT:
+ retval = ((flash_read64(addr) & cword.ll) == cword.ll);
+ break;
+ default:
+ retval = 0;
+ break;
+ }
+ flash_unmap(info, sect, offset, addr);
+
+ return retval;
+}
/*-----------------------------------------------------------------------
*/
-unsigned long flash_init (void)
+static int flash_toggle (flash_info_t * info, flash_sect_t sect,
+ uint offset, uchar cmd)
{
- unsigned long size = 0;
- int i;
+ void *addr;
+ cfiword_t cword;
+ int retval;
-#ifdef CFG_FLASH_PROTECTION
- char *s = getenv("unlock");
+ addr = flash_map (info, sect, offset);
+ flash_make_cmd (info, cmd, &cword);
+ switch (info->portwidth) {
+ case FLASH_CFI_8BIT:
+ retval = ((flash_read8(addr) & cword.c) !=
+ (flash_read8(addr) & cword.c));
+ break;
+ case FLASH_CFI_16BIT:
+ retval = ((flash_read16(addr) & cword.w) !=
+ (flash_read16(addr) & cword.w));
+ break;
+ case FLASH_CFI_32BIT:
+ retval = ((flash_read32(addr) & cword.l) !=
+ (flash_read32(addr) & cword.l));
+ break;
+ case FLASH_CFI_64BIT:
+ retval = ((flash_read64(addr) & cword.ll) !=
+ (flash_read64(addr) & cword.ll));
+ break;
+ default:
+ retval = 0;
+ break;
+ }
+ flash_unmap(info, sect, offset, addr);
+
+ return retval;
+}
+
+/*
+ * flash_is_busy - check to see if the flash is busy
+ *
+ * This routine checks the status of the chip and returns true if the
+ * chip is busy.
+ */
+static int flash_is_busy (flash_info_t * info, flash_sect_t sect)
+{
+ int retval;
+
+ switch (info->vendor) {
+ case CFI_CMDSET_INTEL_STANDARD:
+ case CFI_CMDSET_INTEL_EXTENDED:
+ retval = !flash_isset (info, sect, 0, FLASH_STATUS_DONE);
+ break;
+ case CFI_CMDSET_AMD_STANDARD:
+ case CFI_CMDSET_AMD_EXTENDED:
+#ifdef CONFIG_FLASH_CFI_LEGACY
+ case CFI_CMDSET_AMD_LEGACY:
#endif
+ retval = flash_toggle (info, sect, 0, AMD_STATUS_TOGGLE);
+ break;
+ default:
+ retval = 0;
+ }
+ debug ("flash_is_busy: %d\n", retval);
+ return retval;
+}
- /* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- size += flash_info[i].size = flash_get_size (bank_base[i], i);
- if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-#ifndef CFG_FLASH_QUIET_TEST
- printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
- i+1, flash_info[i].size, flash_info[i].size << 20);
-#endif /* CFG_FLASH_QUIET_TEST */
- }
-#ifdef CFG_FLASH_PROTECTION
- else if ((s != NULL) && (strcmp(s, "yes") == 0)) {
- /*
- * Only the U-Boot image and it's environment is protected,
- * all other sectors are unprotected (unlocked) if flash
- * hardware protection is used (CFG_FLASH_PROTECTION) and
- * the environment variable "unlock" is set to "yes".
- */
- if (flash_info[i].legacy_unlock) {
- int k;
+/*-----------------------------------------------------------------------
+ * wait for XSR.7 to be set. Time out with an error if it does not.
+ * This routine does not set the flash to read-array mode.
+ */
+static int flash_status_check (flash_info_t * info, flash_sect_t sector,
+ ulong tout, char *prompt)
+{
+ ulong start;
- /*
- * Disable legacy_unlock temporarily, since
- * flash_real_protect would relock all other sectors
- * again otherwise.
- */
- flash_info[i].legacy_unlock = 0;
+#if CFG_HZ != 1000
+ tout *= CFG_HZ/1000;
+#endif
- /*
- * Legacy unlocking (e.g. Intel J3) -> unlock only one
- * sector. This will unlock all sectors.
- */
- flash_real_protect (&flash_info[i], 0, 0);
+ /* Wait for command completion */
+ start = get_timer (0);
+ while (flash_is_busy (info, sector)) {
+ if (get_timer (start) > tout) {
+ printf ("Flash %s timeout at address %lx data %lx\n",
+ prompt, info->start[sector],
+ flash_read_long (info, sector, 0));
+ flash_write_cmd (info, sector, 0, info->cmd_reset);
+ return ERR_TIMOUT;
+ }
+ udelay (1); /* also triggers watchdog */
+ }
+ return ERR_OK;
+}
- flash_info[i].legacy_unlock = 1;
+/*-----------------------------------------------------------------------
+ * Wait for XSR.7 to be set, if it times out print an error, otherwise
+ * do a full status check.
+ *
+ * This routine sets the flash to read-array mode.
+ */
+static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
+ ulong tout, char *prompt)
+{
+ int retcode;
- /*
- * Manually mark other sectors as unlocked (unprotected)
- */
- for (k = 1; k < flash_info[i].sector_count; k++)
- flash_info[i].protect[k] = 0;
- } else {
- /*
- * No legancy unlocking -> unlock all sectors
- */
- flash_protect (FLAG_PROTECT_CLEAR,
- flash_info[i].start[0],
- flash_info[i].start[0] + flash_info[i].size - 1,
- &flash_info[i]);
+ retcode = flash_status_check (info, sector, tout, prompt);
+ switch (info->vendor) {
+ case CFI_CMDSET_INTEL_EXTENDED:
+ case CFI_CMDSET_INTEL_STANDARD:
+ if ((retcode == ERR_OK)
+ && !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) {
+ retcode = ERR_INVAL;
+ printf ("Flash %s error at address %lx\n", prompt,
+ info->start[sector]);
+ if (flash_isset (info, sector, 0, FLASH_STATUS_ECLBS |
+ FLASH_STATUS_PSLBS)) {
+ puts ("Command Sequence Error.\n");
+ } else if (flash_isset (info, sector, 0,
+ FLASH_STATUS_ECLBS)) {
+ puts ("Block Erase Error.\n");
+ retcode = ERR_NOT_ERASED;
+ } else if (flash_isset (info, sector, 0,
+ FLASH_STATUS_PSLBS)) {
+ puts ("Locking Error\n");
+ }
+ if (flash_isset (info, sector, 0, FLASH_STATUS_DPS)) {
+ puts ("Block locked.\n");
+ retcode = ERR_PROTECTED;
}
+ if (flash_isset (info, sector, 0, FLASH_STATUS_VPENS))
+ puts ("Vpp Low Error.\n");
}
-#endif /* CFG_FLASH_PROTECTION */
+ flash_write_cmd (info, sector, 0, info->cmd_reset);
+ break;
+ default:
+ break;
}
+ return retcode;
+}
- /* Monitor protection ON by default */
-#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
- flash_protect (FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
- flash_get_info(CFG_MONITOR_BASE));
+/*-----------------------------------------------------------------------
+ */
+static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
+{
+#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+ unsigned short w;
+ unsigned int l;
+ unsigned long long ll;
#endif
- /* Environment protection ON by default */
-#ifdef CFG_ENV_IS_IN_FLASH
- flash_protect (FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
- flash_get_info(CFG_ENV_ADDR));
+ switch (info->portwidth) {
+ case FLASH_CFI_8BIT:
+ cword->c = c;
+ break;
+ case FLASH_CFI_16BIT:
+#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+ w = c;
+ w <<= 8;
+ cword->w = (cword->w >> 8) | w;
+#else
+ cword->w = (cword->w << 8) | c;
#endif
-
- /* Redundant environment protection ON by default */
-#ifdef CFG_ENV_ADDR_REDUND
- flash_protect (FLAG_PROTECT_SET,
- CFG_ENV_ADDR_REDUND,
- CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
- flash_get_info(CFG_ENV_ADDR_REDUND));
+ break;
+ case FLASH_CFI_32BIT:
+#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+ l = c;
+ l <<= 24;
+ cword->l = (cword->l >> 8) | l;
+#else
+ cword->l = (cword->l << 8) | c;
#endif
- return (size);
+ break;
+ case FLASH_CFI_64BIT:
+#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+ ll = c;
+ ll <<= 56;
+ cword->ll = (cword->ll >> 8) | ll;
+#else
+ cword->ll = (cword->ll << 8) | c;
+#endif
+ break;
+ }
+}
+
+/* loop through the sectors from the highest address when the passed
+ * address is greater or equal to the sector address we have a match
+ */
+static flash_sect_t find_sector (flash_info_t * info, ulong addr)
+{
+ flash_sect_t sector;
+
+ for (sector = info->sector_count - 1; sector >= 0; sector--) {
+ if (addr >= info->start[sector])
+ break;
+ }
+ return sector;
}
/*-----------------------------------------------------------------------
*/
-#if defined(CFG_ENV_IS_IN_FLASH) || defined(CFG_ENV_ADDR_REDUND) || (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
-static flash_info_t *flash_get_info(ulong base)
+static int flash_write_cfiword (flash_info_t * info, ulong dest,
+ cfiword_t cword)
{
- int i;
- flash_info_t * info = 0;
+ void *dstaddr;
+ int flag;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
- info = & flash_info[i];
- if (info->size && info->start[0] <= base &&
- base <= info->start[0] + info->size - 1)
+ dstaddr = map_physmem(dest, info->portwidth, MAP_NOCACHE);
+
+ /* Check if Flash is (sufficiently) erased */
+ switch (info->portwidth) {
+ case FLASH_CFI_8BIT:
+ flag = ((flash_read8(dstaddr) & cword.c) == cword.c);
+ break;
+ case FLASH_CFI_16BIT:
+ flag = ((flash_read16(dstaddr) & cword.w) == cword.w);
+ break;
+ case FLASH_CFI_32BIT:
+ flag = ((flash_read32(dstaddr) & cword.l) == cword.l);
+ break;
+ case FLASH_CFI_64BIT:
+ flag = ((flash_read64(dstaddr) & cword.ll) == cword.ll);
+ break;
+ default:
+ flag = 0;
+ break;
+ }
+ if (!flag) {
+ unmap_physmem(dstaddr, info->portwidth);
+ return 2;
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ switch (info->vendor) {
+ case CFI_CMDSET_INTEL_EXTENDED:
+ case CFI_CMDSET_INTEL_STANDARD:
+ flash_write_cmd (info, 0, 0, FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd (info, 0, 0, FLASH_CMD_WRITE);
+ break;
+ case CFI_CMDSET_AMD_EXTENDED:
+ case CFI_CMDSET_AMD_STANDARD:
+#ifdef CONFIG_FLASH_CFI_LEGACY
+ case CFI_CMDSET_AMD_LEGACY:
+#endif
+ flash_unlock_seq (info, 0);
+ flash_write_cmd (info, 0, info->addr_unlock1, AMD_CMD_WRITE);
+ break;
+ }
+
+ switch (info->portwidth) {
+ case FLASH_CFI_8BIT:
+ flash_write8(cword.c, dstaddr);
+ break;
+ case FLASH_CFI_16BIT:
+ flash_write16(cword.w, dstaddr);
+ break;
+ case FLASH_CFI_32BIT:
+ flash_write32(cword.l, dstaddr);
+ break;
+ case FLASH_CFI_64BIT:
+ flash_write64(cword.ll, dstaddr);
+ break;
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts ();
+
+ unmap_physmem(dstaddr, info->portwidth);
+
+ return flash_full_status_check (info, find_sector (info, dest),
+ info->write_tout, "write");
+}
+
+#ifdef CFG_FLASH_USE_BUFFER_WRITE
+
+static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
+ int len)
+{
+ flash_sect_t sector;
+ int cnt;
+ int retcode;
+ void *src = cp;
+ void *dst = map_physmem(dest, len, MAP_NOCACHE);
+
+ sector = find_sector (info, dest);
+
+ switch (info->vendor) {
+ case CFI_CMDSET_INTEL_STANDARD:
+ case CFI_CMDSET_INTEL_EXTENDED:
+ flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd (info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
+ retcode = flash_status_check (info, sector,
+ info->buffer_write_tout,
+ "write to buffer");
+ if (retcode == ERR_OK) {
+ /* reduce the number of loops by the width of
+ * the port */
+ switch (info->portwidth) {
+ case FLASH_CFI_8BIT:
+ cnt = len;
+ break;
+ case FLASH_CFI_16BIT:
+ cnt = len >> 1;
+ break;
+ case FLASH_CFI_32BIT:
+ cnt = len >> 2;
+ break;
+ case FLASH_CFI_64BIT:
+ cnt = len >> 3;
+ break;
+ default:
+ retcode = ERR_INVAL;
+ goto out_unmap;
+ }
+ flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
+ while (cnt-- > 0) {
+ switch (info->portwidth) {
+ case FLASH_CFI_8BIT:
+ flash_write8(flash_read8(src), dst);
+ src += 1, dst += 1;
+ break;
+ case FLASH_CFI_16BIT:
+ flash_write16(flash_read16(src), dst);
+ src += 2, dst += 2;
+ break;
+ case FLASH_CFI_32BIT:
+ flash_write32(flash_read32(src), dst);
+ src += 4, dst += 4;
+ break;
+ case FLASH_CFI_64BIT:
+ flash_write64(flash_read64(src), dst);
+ src += 8, dst += 8;
+ break;
+ default:
+ retcode = ERR_INVAL;
+ goto out_unmap;
+ }
+ }
+ flash_write_cmd (info, sector, 0,
+ FLASH_CMD_WRITE_BUFFER_CONFIRM);
+ retcode = flash_full_status_check (
+ info, sector, info->buffer_write_tout,
+ "buffer write");
+ }
+
+ break;
+
+ case CFI_CMDSET_AMD_STANDARD:
+ case CFI_CMDSET_AMD_EXTENDED:
+ flash_unlock_seq(info,0);
+ flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_TO_BUFFER);
+
+ switch (info->portwidth) {
+ case FLASH_CFI_8BIT:
+ cnt = len;
+ flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
+ while (cnt-- > 0) {
+ flash_write8(flash_read8(src), dst);
+ src += 1, dst += 1;
+ }
break;
+ case FLASH_CFI_16BIT:
+ cnt = len >> 1;
+ flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
+ while (cnt-- > 0) {
+ flash_write16(flash_read16(src), dst);
+ src += 2, dst += 2;
+ }
+ break;
+ case FLASH_CFI_32BIT:
+ cnt = len >> 2;
+ flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
+ while (cnt-- > 0) {
+ flash_write32(flash_read32(src), dst);
+ src += 4, dst += 4;
+ }
+ break;
+ case FLASH_CFI_64BIT:
+ cnt = len >> 3;
+ flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
+ while (cnt-- > 0) {
+ flash_write64(flash_read64(src), dst);
+ src += 8, dst += 8;
+ }
+ break;
+ default:
+ retcode = ERR_INVAL;
+ goto out_unmap;
+ }
+
+ flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_BUFFER_CONFIRM);
+ retcode = flash_full_status_check (info, sector,
+ info->buffer_write_tout,
+ "buffer write");
+ break;
+
+ default:
+ debug ("Unknown Command Set\n");
+ retcode = ERR_INVAL;
+ break;
}
- return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+out_unmap:
+ unmap_physmem(dst, len);
+ return retcode;
}
-#endif
+#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+
/*-----------------------------------------------------------------------
*/
@@ -465,7 +976,8 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
}
}
if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
} else {
putc ('\n');
}
@@ -476,18 +988,33 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
switch (info->vendor) {
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
- flash_write_cmd (info, sect, 0, FLASH_CMD_CLEAR_STATUS);
- flash_write_cmd (info, sect, 0, FLASH_CMD_BLOCK_ERASE);
- flash_write_cmd (info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
+ flash_write_cmd (info, sect, 0,
+ FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd (info, sect, 0,
+ FLASH_CMD_BLOCK_ERASE);
+ flash_write_cmd (info, sect, 0,
+ FLASH_CMD_ERASE_CONFIRM);
break;
case CFI_CMDSET_AMD_STANDARD:
case CFI_CMDSET_AMD_EXTENDED:
flash_unlock_seq (info, sect);
- flash_write_cmd (info, sect, AMD_ADDR_ERASE_START,
- AMD_CMD_ERASE_START);
+ flash_write_cmd (info, sect,
+ info->addr_unlock1,
+ AMD_CMD_ERASE_START);
flash_unlock_seq (info, sect);
- flash_write_cmd (info, sect, 0, AMD_CMD_ERASE_SECTOR);
+ flash_write_cmd (info, sect, 0,
+ AMD_CMD_ERASE_SECTOR);
+ break;
+#ifdef CONFIG_FLASH_CFI_LEGACY
+ case CFI_CMDSET_AMD_LEGACY:
+ flash_unlock_seq (info, 0);
+ flash_write_cmd (info, 0, info->addr_unlock1,
+ AMD_CMD_ERASE_START);
+ flash_unlock_seq (info, 0);
+ flash_write_cmd (info, sect, 0,
+ AMD_CMD_ERASE_SECTOR);
break;
+#endif
default:
debug ("Unkown flash vendor %d\n",
info->vendor);
@@ -516,10 +1043,15 @@ void flash_print_info (flash_info_t * info)
return;
}
- printf ("CFI conformant FLASH (%d x %d)",
+ printf ("%s FLASH (%d x %d)",
+ info->name,
(info->portwidth << 3), (info->chipwidth << 3));
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
+ if (info->size < 1024*1024)
+ printf (" Size: %ld kB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+ else
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
printf (" ");
switch (info->vendor) {
case CFI_CMDSET_INTEL_STANDARD:
@@ -534,6 +1066,11 @@ void flash_print_info (flash_info_t * info)
case CFI_CMDSET_AMD_EXTENDED:
printf ("AMD Extended");
break;
+#ifdef CONFIG_FLASH_CFI_LEGACY
+ case CFI_CMDSET_AMD_LEGACY:
+ printf ("AMD Legacy");
+ break;
+#endif
default:
printf ("Unknown (%d)", info->vendor);
break;
@@ -547,7 +1084,8 @@ void flash_print_info (flash_info_t * info)
info->erase_blk_tout,
info->write_tout);
if (info->buffer_size > 1) {
- printf (" Buffer write timeout: %ld ms, buffer size: %d bytes\n",
+ printf (" Buffer write timeout: %ld ms, "
+ "buffer size: %d bytes\n",
info->buffer_write_tout,
info->buffer_size);
}
@@ -565,10 +1103,7 @@ void flash_print_info (flash_info_t * info)
/*
* Check if whole sector is erased
*/
- if (i != (info->sector_count - 1))
- size = info->start[i + 1] - info->start[i];
- else
- size = info->start[0] + info->size - info->start[i];
+ size = flash_sector_size(info, i);
erased = 1;
flash = (volatile unsigned long *) info->start[i];
size = size >> 2; /* divide by 4 for longword access */
@@ -603,7 +1138,7 @@ void flash_print_info (flash_info_t * info)
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
ulong wp;
- ulong cp;
+ uchar *p;
int aln;
cfiword_t cword;
int i, rc;
@@ -612,26 +1147,28 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
int buffered_size;
#endif
/* get lower aligned address */
- /* get lower aligned address */
wp = (addr & ~(info->portwidth - 1));
/* handle unaligned start */
if ((aln = addr - wp) != 0) {
cword.l = 0;
- cp = wp;
- for (i = 0; i < aln; ++i, ++cp)
- flash_add_byte (info, &cword, (*(uchar *) cp));
+ p = map_physmem(wp, info->portwidth, MAP_NOCACHE);
+ for (i = 0; i < aln; ++i)
+ flash_add_byte (info, &cword, flash_read8(p + i));
for (; (i < info->portwidth) && (cnt > 0); i++) {
flash_add_byte (info, &cword, *src++);
cnt--;
- cp++;
}
- for (; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
- flash_add_byte (info, &cword, (*(uchar *) cp));
- if ((rc = flash_write_cfiword (info, wp, cword)) != 0)
+ for (; (cnt == 0) && (i < info->portwidth); ++i)
+ flash_add_byte (info, &cword, flash_read8(p + i));
+
+ rc = flash_write_cfiword (info, wp, cword);
+ unmap_physmem(p, info->portwidth);
+ if (rc != 0)
return rc;
- wp = cp;
+
+ wp += i;
}
/* handle the aligned part */
@@ -682,13 +1219,14 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
* handle unaligned tail bytes
*/
cword.l = 0;
- for (i = 0, cp = wp; (i < info->portwidth) && (cnt > 0); ++i, ++cp) {
+ p = map_physmem(wp, info->portwidth, MAP_NOCACHE);
+ for (i = 0; (i < info->portwidth) && (cnt > 0); ++i) {
flash_add_byte (info, &cword, *src++);
--cnt;
}
- for (; i < info->portwidth; ++i, ++cp) {
- flash_add_byte (info, &cword, (*(uchar *) cp));
- }
+ for (; i < info->portwidth; ++i)
+ flash_add_byte (info, &cword, flash_read8(p + i));
+ unmap_physmem(p, info->portwidth);
return flash_write_cfiword (info, wp, cword);
}
@@ -740,10 +1278,11 @@ void flash_read_user_serial (flash_info_t * info, void *buffer, int offset,
uchar *dst;
dst = buffer;
- src = flash_make_addr (info, 0, FLASH_OFFSET_USER_PROTECTION);
+ src = flash_map (info, 0, FLASH_OFFSET_USER_PROTECTION);
flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID);
memcpy (dst, src + offset, len);
flash_write_cmd (info, 0, 0, info->cmd_reset);
+ flash_unmap(info, 0, FLASH_OFFSET_USER_PROTECTION, src);
}
/*
@@ -754,418 +1293,310 @@ void flash_read_factory_serial (flash_info_t * info, void *buffer, int offset,
{
uchar *src;
- src = flash_make_addr (info, 0, FLASH_OFFSET_INTEL_PROTECTION);
+ src = flash_map (info, 0, FLASH_OFFSET_INTEL_PROTECTION);
flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID);
memcpy (buffer, src + offset, len);
flash_write_cmd (info, 0, 0, info->cmd_reset);
+ flash_unmap(info, 0, FLASH_OFFSET_INTEL_PROTECTION, src);
}
#endif /* CFG_FLASH_PROTECTION */
-/*
- * flash_is_busy - check to see if the flash is busy
- * This routine checks the status of the chip and returns true if the chip is busy
+/*-----------------------------------------------------------------------
+ * Reverse the order of the erase regions in the CFI QRY structure.
+ * This is needed for chips that are either a) correctly detected as
+ * top-boot, or b) buggy.
*/
-static int flash_is_busy (flash_info_t * info, flash_sect_t sect)
+static void cfi_reverse_geometry(struct cfi_qry *qry)
{
- int retval;
+ unsigned int i, j;
+ u32 tmp;
- switch (info->vendor) {
- case CFI_CMDSET_INTEL_STANDARD:
- case CFI_CMDSET_INTEL_EXTENDED:
- retval = !flash_isset (info, sect, 0, FLASH_STATUS_DONE);
- break;
- case CFI_CMDSET_AMD_STANDARD:
- case CFI_CMDSET_AMD_EXTENDED:
- retval = flash_toggle (info, sect, 0, AMD_STATUS_TOGGLE);
- break;
- default:
- retval = 0;
+ for (i = 0, j = qry->num_erase_regions - 1; i < j; i++, j--) {
+ tmp = qry->erase_region_info[i];
+ qry->erase_region_info[i] = qry->erase_region_info[j];
+ qry->erase_region_info[j] = tmp;
}
- debug ("flash_is_busy: %d\n", retval);
- return retval;
}
/*-----------------------------------------------------------------------
- * wait for XSR.7 to be set. Time out with an error if it does not.
- * This routine does not set the flash to read-array mode.
+ * read jedec ids from device and set corresponding fields in info struct
+ *
+ * Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct
+ *
*/
-static int flash_status_check (flash_info_t * info, flash_sect_t sector,
- ulong tout, char *prompt)
+static void cmdset_intel_read_jedec_ids(flash_info_t *info)
{
- ulong start;
-
-#if CFG_HZ != 1000
- tout *= CFG_HZ/1000;
-#endif
-
- /* Wait for command completion */
- start = get_timer (0);
- while (flash_is_busy (info, sector)) {
- if (get_timer (start) > tout) {
- printf ("Flash %s timeout at address %lx data %lx\n",
- prompt, info->start[sector],
- flash_read_long (info, sector, 0));
- flash_write_cmd (info, sector, 0, info->cmd_reset);
- return ERR_TIMOUT;
- }
- udelay (1); /* also triggers watchdog */
- }
- return ERR_OK;
+ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+ flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID);
+ udelay(1000); /* some flash are slow to respond */
+ info->manufacturer_id = flash_read_uchar (info,
+ FLASH_OFFSET_MANUFACTURER_ID);
+ info->device_id = flash_read_uchar (info,
+ FLASH_OFFSET_DEVICE_ID);
+ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
}
-/*-----------------------------------------------------------------------
- * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
- * This routine sets the flash to read-array mode.
- */
-static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
- ulong tout, char *prompt)
+static int cmdset_intel_init(flash_info_t *info, struct cfi_qry *qry)
{
- int retcode;
+ info->cmd_reset = FLASH_CMD_RESET;
- retcode = flash_status_check (info, sector, tout, prompt);
- switch (info->vendor) {
- case CFI_CMDSET_INTEL_EXTENDED:
- case CFI_CMDSET_INTEL_STANDARD:
- if ((retcode == ERR_OK)
- && !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) {
- retcode = ERR_INVAL;
- printf ("Flash %s error at address %lx\n", prompt,
- info->start[sector]);
- if (flash_isset (info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)) {
- puts ("Command Sequence Error.\n");
- } else if (flash_isset (info, sector, 0, FLASH_STATUS_ECLBS)) {
- puts ("Block Erase Error.\n");
- retcode = ERR_NOT_ERASED;
- } else if (flash_isset (info, sector, 0, FLASH_STATUS_PSLBS)) {
- puts ("Locking Error\n");
- }
- if (flash_isset (info, sector, 0, FLASH_STATUS_DPS)) {
- puts ("Block locked.\n");
- retcode = ERR_PROTECTED;
- }
- if (flash_isset (info, sector, 0, FLASH_STATUS_VPENS))
- puts ("Vpp Low Error.\n");
- }
- flash_write_cmd (info, sector, 0, info->cmd_reset);
- break;
- default:
- break;
+ cmdset_intel_read_jedec_ids(info);
+ flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
+
+#ifdef CFG_FLASH_PROTECTION
+ /* read legacy lock/unlock bit from intel flash */
+ if (info->ext_addr) {
+ info->legacy_unlock = flash_read_uchar (info,
+ info->ext_addr + 5) & 0x08;
}
- return retcode;
+#endif
+
+ return 0;
}
-/*-----------------------------------------------------------------------
- */
-static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
+static void cmdset_amd_read_jedec_ids(flash_info_t *info)
{
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
- unsigned short w;
- unsigned int l;
- unsigned long long ll;
-#endif
-
- switch (info->portwidth) {
- case FLASH_CFI_8BIT:
- cword->c = c;
- break;
- case FLASH_CFI_16BIT:
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
- w = c;
- w <<= 8;
- cword->w = (cword->w >> 8) | w;
-#else
- cword->w = (cword->w << 8) | c;
-#endif
- break;
- case FLASH_CFI_32BIT:
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
- l = c;
- l <<= 24;
- cword->l = (cword->l >> 8) | l;
-#else
- cword->l = (cword->l << 8) | c;
-#endif
- break;
- case FLASH_CFI_64BIT:
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
- ll = c;
- ll <<= 56;
- cword->ll = (cword->ll >> 8) | ll;
-#else
- cword->ll = (cword->ll << 8) | c;
-#endif
- break;
+ flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+ flash_unlock_seq(info, 0);
+ flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID);
+ udelay(1000); /* some flash are slow to respond */
+ info->manufacturer_id = flash_read_uchar (info,
+ FLASH_OFFSET_MANUFACTURER_ID);
+ info->device_id = flash_read_uchar (info,
+ FLASH_OFFSET_DEVICE_ID);
+ if (info->device_id == 0x7E) {
+ /* AMD 3-byte (expanded) device ids */
+ info->device_id2 = flash_read_uchar (info,
+ FLASH_OFFSET_DEVICE_ID2);
+ info->device_id2 <<= 8;
+ info->device_id2 |= flash_read_uchar (info,
+ FLASH_OFFSET_DEVICE_ID3);
}
+ flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
}
-
-/*-----------------------------------------------------------------------
- * make a proper sized command based on the port and chip widths
- */
-static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf)
+static int cmdset_amd_init(flash_info_t *info, struct cfi_qry *qry)
{
- int i;
- uchar *cp = (uchar *) cmdbuf;
+ info->cmd_reset = AMD_CMD_RESET;
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
- for (i = info->portwidth; i > 0; i--)
-#else
- for (i = 1; i <= info->portwidth; i++)
-#endif
- *cp++ = (i & (info->chipwidth - 1)) ? '\0' : cmd;
+ cmdset_amd_read_jedec_ids(info);
+ flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
+
+ return 0;
}
-/*
- * Write a proper sized command to the correct address
- */
-static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+#ifdef CONFIG_FLASH_CFI_LEGACY
+static void flash_read_jedec_ids (flash_info_t * info)
{
+ info->manufacturer_id = 0;
+ info->device_id = 0;
+ info->device_id2 = 0;
- volatile cfiptr_t addr;
- cfiword_t cword;
-
- addr.cp = flash_make_addr (info, sect, offset);
- flash_make_cmd (info, cmd, &cword);
- switch (info->portwidth) {
- case FLASH_CFI_8BIT:
- debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", addr.cp, cmd,
- cword.c, info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
- *addr.cp = cword.c;
- break;
- case FLASH_CFI_16BIT:
- debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", addr.wp,
- cmd, cword.w,
- info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
- *addr.wp = cword.w;
+ switch (info->vendor) {
+ case CFI_CMDSET_INTEL_STANDARD:
+ case CFI_CMDSET_INTEL_EXTENDED:
+ flash_read_jedec_ids_intel(info);
break;
- case FLASH_CFI_32BIT:
- debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", addr.lp,
- cmd, cword.l,
- info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
- *addr.lp = cword.l;
+ case CFI_CMDSET_AMD_STANDARD:
+ case CFI_CMDSET_AMD_EXTENDED:
+ flash_read_jedec_ids_amd(info);
break;
- case FLASH_CFI_64BIT:
-#ifdef DEBUG
- {
- char str[20];
-
- print_longlong (str, cword.ll);
-
- debug ("fwrite addr %p cmd %x %s 64 bit x %d bit\n",
- addr.llp, cmd, str,
- info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
- }
-#endif
- *addr.llp = cword.ll;
+ default:
break;
}
-
- /* Ensure all the instructions are fully finished */
- sync();
-}
-
-static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect)
-{
- flash_write_cmd (info, sect, AMD_ADDR_START, AMD_CMD_UNLOCK_START);
- flash_write_cmd (info, sect, AMD_ADDR_ACK, AMD_CMD_UNLOCK_ACK);
}
/*-----------------------------------------------------------------------
+ * Call board code to request info about non-CFI flash.
+ * board_flash_get_legacy needs to fill in at least:
+ * info->portwidth, info->chipwidth and info->interface for Jedec probing.
*/
-static int flash_isequal (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+static int flash_detect_legacy(ulong base, int banknum)
{
- cfiptr_t cptr;
- cfiword_t cword;
- int retval;
-
- cptr.cp = flash_make_addr (info, sect, offset);
- flash_make_cmd (info, cmd, &cword);
+ flash_info_t *info = &flash_info[banknum];
- debug ("is= cmd %x(%c) addr %p ", cmd, cmd, cptr.cp);
- switch (info->portwidth) {
- case FLASH_CFI_8BIT:
- debug ("is= %x %x\n", cptr.cp[0], cword.c);
- retval = (cptr.cp[0] == cword.c);
- break;
- case FLASH_CFI_16BIT:
- debug ("is= %4.4x %4.4x\n", cptr.wp[0], cword.w);
- retval = (cptr.wp[0] == cword.w);
- break;
- case FLASH_CFI_32BIT:
- debug ("is= %8.8lx %8.8lx\n", cptr.lp[0], cword.l);
- retval = (cptr.lp[0] == cword.l);
- break;
- case FLASH_CFI_64BIT:
-#ifdef DEBUG
- {
- char str1[20];
- char str2[20];
+ if (board_flash_get_legacy(base, banknum, info)) {
+ /* board code may have filled info completely. If not, we
+ use JEDEC ID probing. */
+ if (!info->vendor) {
+ int modes[] = {
+ CFI_CMDSET_AMD_STANDARD,
+ CFI_CMDSET_INTEL_STANDARD
+ };
+ int i;
+
+ for (i = 0; i < sizeof(modes) / sizeof(modes[0]); i++) {
+ info->vendor = modes[i];
+ info->start[0] = base;
+ if (info->portwidth == FLASH_CFI_8BIT
+ && info->interface == FLASH_CFI_X8X16) {
+ info->addr_unlock1 = 0x2AAA;
+ info->addr_unlock2 = 0x5555;
+ } else {
+ info->addr_unlock1 = 0x5555;
+ info->addr_unlock2 = 0x2AAA;
+ }
+ flash_read_jedec_ids(info);
+ debug("JEDEC PROBE: ID %x %x %x\n",
+ info->manufacturer_id,
+ info->device_id,
+ info->device_id2);
+ if (jedec_flash_match(info, base))
+ break;
+ }
+ }
- print_longlong (str1, cptr.llp[0]);
- print_longlong (str2, cword.ll);
- debug ("is= %s %s\n", str1, str2);
+ switch(info->vendor) {
+ case CFI_CMDSET_INTEL_STANDARD:
+ case CFI_CMDSET_INTEL_EXTENDED:
+ info->cmd_reset = FLASH_CMD_RESET;
+ break;
+ case CFI_CMDSET_AMD_STANDARD:
+ case CFI_CMDSET_AMD_EXTENDED:
+ case CFI_CMDSET_AMD_LEGACY:
+ info->cmd_reset = AMD_CMD_RESET;
+ break;
}
-#endif
- retval = (cptr.llp[0] == cword.ll);
- break;
- default:
- retval = 0;
- break;
+ info->flash_id = FLASH_MAN_CFI;
+ return 1;
}
- return retval;
+ return 0; /* use CFI */
}
-
-/*-----------------------------------------------------------------------
- */
-static int flash_isset (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+#else
+static inline int flash_detect_legacy(ulong base, int banknum)
{
- cfiptr_t cptr;
- cfiword_t cword;
- int retval;
-
- cptr.cp = flash_make_addr (info, sect, offset);
- flash_make_cmd (info, cmd, &cword);
- switch (info->portwidth) {
- case FLASH_CFI_8BIT:
- retval = ((cptr.cp[0] & cword.c) == cword.c);
- break;
- case FLASH_CFI_16BIT:
- retval = ((cptr.wp[0] & cword.w) == cword.w);
- break;
- case FLASH_CFI_32BIT:
- retval = ((cptr.lp[0] & cword.l) == cword.l);
- break;
- case FLASH_CFI_64BIT:
- retval = ((cptr.llp[0] & cword.ll) == cword.ll);
- break;
- default:
- retval = 0;
- break;
- }
- return retval;
+ return 0; /* use CFI */
}
+#endif
/*-----------------------------------------------------------------------
+ * detect if flash is compatible with the Common Flash Interface (CFI)
+ * http://www.jedec.org/download/search/jesd68.pdf
*/
-static int flash_toggle (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+static void flash_read_cfi (flash_info_t *info, void *buf,
+ unsigned int start, size_t len)
{
- cfiptr_t cptr;
- cfiword_t cword;
- int retval;
+ u8 *p = buf;
+ unsigned int i;
- cptr.cp = flash_make_addr (info, sect, offset);
- flash_make_cmd (info, cmd, &cword);
- switch (info->portwidth) {
- case FLASH_CFI_8BIT:
- retval = ((cptr.cp[0] & cword.c) != (cptr.cp[0] & cword.c));
- break;
- case FLASH_CFI_16BIT:
- retval = ((cptr.wp[0] & cword.w) != (cptr.wp[0] & cword.w));
- break;
- case FLASH_CFI_32BIT:
- retval = ((cptr.lp[0] & cword.l) != (cptr.lp[0] & cword.l));
- break;
- case FLASH_CFI_64BIT:
- retval = ((cptr.llp[0] & cword.ll) !=
- (cptr.llp[0] & cword.ll));
- break;
- default:
- retval = 0;
- break;
- }
- return retval;
+ for (i = 0; i < len; i++)
+ p[i] = flash_read_uchar(info, start + i);
}
-/*-----------------------------------------------------------------------
- * read jedec ids from device and set corresponding fields in info struct
- *
- * Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct
- *
-*/
-static void flash_read_jedec_ids (flash_info_t * info)
+static int __flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry)
{
- info->manufacturer_id = 0;
- info->device_id = 0;
- info->device_id2 = 0;
+ int cfi_offset;
- switch (info->vendor) {
- case CFI_CMDSET_INTEL_STANDARD:
- case CFI_CMDSET_INTEL_EXTENDED:
- flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
- flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID);
- udelay(1000); /* some flash are slow to respond */
- info->manufacturer_id = flash_read_uchar (info,
- FLASH_OFFSET_MANUFACTURER_ID);
- info->device_id = flash_read_uchar (info,
- FLASH_OFFSET_DEVICE_ID);
- flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
- break;
- case CFI_CMDSET_AMD_STANDARD:
- case CFI_CMDSET_AMD_EXTENDED:
- flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
- flash_unlock_seq(info, 0);
- flash_write_cmd(info, 0, AMD_ADDR_START, FLASH_CMD_READ_ID);
- udelay(1000); /* some flash are slow to respond */
- info->manufacturer_id = flash_read_uchar (info,
- FLASH_OFFSET_MANUFACTURER_ID);
- info->device_id = flash_read_uchar (info,
- FLASH_OFFSET_DEVICE_ID);
- if (info->device_id == 0x7E) {
- /* AMD 3-byte (expanded) device ids */
- info->device_id2 = flash_read_uchar (info,
- FLASH_OFFSET_DEVICE_ID2);
- info->device_id2 <<= 8;
- info->device_id2 |= flash_read_uchar (info,
- FLASH_OFFSET_DEVICE_ID3);
+ flash_write_cmd (info, 0, 0, info->cmd_reset);
+ for (cfi_offset=0;
+ cfi_offset < sizeof(flash_offset_cfi) / sizeof(uint);
+ cfi_offset++) {
+ flash_write_cmd (info, 0, flash_offset_cfi[cfi_offset],
+ FLASH_CMD_CFI);
+ if (flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
+ && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R')
+ && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) {
+ flash_read_cfi(info, qry, FLASH_OFFSET_CFI_RESP,
+ sizeof(struct cfi_qry));
+ info->interface = le16_to_cpu(qry->interface_desc);
+
+ info->cfi_offset = flash_offset_cfi[cfi_offset];
+ debug ("device interface is %d\n",
+ info->interface);
+ debug ("found port %d chip %d ",
+ info->portwidth, info->chipwidth);
+ debug ("port %d bits chip %d bits\n",
+ info->portwidth << CFI_FLASH_SHIFT_WIDTH,
+ info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+
+ /* calculate command offsets as in the Linux driver */
+ info->addr_unlock1 = 0x555;
+ info->addr_unlock2 = 0x2aa;
+
+ /*
+ * modify the unlock address if we are
+ * in compatibility mode
+ */
+ if ( /* x8/x16 in x8 mode */
+ ((info->chipwidth == FLASH_CFI_BY8) &&
+ (info->interface == FLASH_CFI_X8X16)) ||
+ /* x16/x32 in x16 mode */
+ ((info->chipwidth == FLASH_CFI_BY16) &&
+ (info->interface == FLASH_CFI_X16X32)))
+ {
+ info->addr_unlock1 = 0xaaa;
+ info->addr_unlock2 = 0x555;
+ }
+
+ info->name = "CFI conformant";
+ return 1;
}
- flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
- break;
- default:
- break;
}
+
+ return 0;
}
-/*-----------------------------------------------------------------------
- * detect if flash is compatible with the Common Flash Interface (CFI)
- * http://www.jedec.org/download/search/jesd68.pdf
- *
-*/
-static int flash_detect_cfi (flash_info_t * info)
+static int flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry)
{
- int cfi_offset;
debug ("flash detect cfi\n");
for (info->portwidth = CFG_FLASH_CFI_WIDTH;
info->portwidth <= FLASH_CFI_64BIT; info->portwidth <<= 1) {
for (info->chipwidth = FLASH_CFI_BY8;
info->chipwidth <= info->portwidth;
- info->chipwidth <<= 1) {
- flash_write_cmd (info, 0, 0, info->cmd_reset);
- for (cfi_offset=0; cfi_offset < sizeof(flash_offset_cfi)/sizeof(uint); cfi_offset++) {
- flash_write_cmd (info, 0, flash_offset_cfi[cfi_offset], FLASH_CMD_CFI);
- if (flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
- && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R')
- && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) {
- info->interface = flash_read_ushort (info, 0, FLASH_OFFSET_INTERFACE);
- info->cfi_offset=flash_offset_cfi[cfi_offset];
- debug ("device interface is %d\n",
- info->interface);
- debug ("found port %d chip %d ",
- info->portwidth, info->chipwidth);
- debug ("port %d bits chip %d bits\n",
- info->portwidth << CFI_FLASH_SHIFT_WIDTH,
- info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
- return 1;
- }
- }
- }
+ info->chipwidth <<= 1)
+ if (__flash_detect_cfi(info, qry))
+ return 1;
}
debug ("not found\n");
return 0;
}
/*
+ * Manufacturer-specific quirks. Add workarounds for geometry
+ * reversal, etc. here.
+ */
+static void flash_fixup_amd(flash_info_t *info, struct cfi_qry *qry)
+{
+ /* check if flash geometry needs reversal */
+ if (qry->num_erase_regions > 1) {
+ /* reverse geometry if top boot part */
+ if (info->cfi_version < 0x3131) {
+ /* CFI < 1.1, try to guess from device id */
+ if ((info->device_id & 0x80) != 0)
+ cfi_reverse_geometry(qry);
+ } else if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) {
+ /* CFI >= 1.1, deduct from top/bottom flag */
+ /* note: ext_addr is valid since cfi_version > 0 */
+ cfi_reverse_geometry(qry);
+ }
+ }
+}
+
+static void flash_fixup_atmel(flash_info_t *info, struct cfi_qry *qry)
+{
+ int reverse_geometry = 0;
+
+ /* Check the "top boot" bit in the PRI */
+ if (info->ext_addr && !(flash_read_uchar(info, info->ext_addr + 6) & 1))
+ reverse_geometry = 1;
+
+ /* AT49BV6416(T) list the erase regions in the wrong order.
+ * However, the device ID is identical with the non-broken
+ * AT49BV642D since u-boot only reads the low byte (they
+ * differ in the high byte.) So leave out this fixup for now.
+ */
+#if 0
+ if (info->device_id == 0xd6 || info->device_id == 0xd2)
+ reverse_geometry = !reverse_geometry;
+#endif
+
+ if (reverse_geometry)
+ cfi_reverse_geometry(qry);
+}
+
+/*
* The following code cannot be run from FLASH!
*
*/
@@ -1180,7 +1611,7 @@ ulong flash_get_size (ulong base, int banknum)
uchar num_erase_regions;
int erase_region_size;
int erase_region_count;
- int geometry_reversed = 0;
+ struct cfi_qry qry;
info->ext_addr = 0;
info->cfi_version = 0;
@@ -1190,56 +1621,50 @@ ulong flash_get_size (ulong base, int banknum)
info->start[0] = base;
- if (flash_detect_cfi (info)) {
- info->vendor = flash_read_ushort (info, 0,
- FLASH_OFFSET_PRIMARY_VENDOR);
- flash_read_jedec_ids (info);
- flash_write_cmd (info, 0, info->cfi_offset, FLASH_CMD_CFI);
- num_erase_regions = flash_read_uchar (info,
- FLASH_OFFSET_NUM_ERASE_REGIONS);
- info->ext_addr = flash_read_ushort (info, 0,
- FLASH_OFFSET_EXT_QUERY_T_P_ADDR);
+ if (flash_detect_cfi (info, &qry)) {
+ info->vendor = le16_to_cpu(qry.p_id);
+ info->ext_addr = le16_to_cpu(qry.p_adr);
+ num_erase_regions = qry.num_erase_regions;
+
if (info->ext_addr) {
info->cfi_version = (ushort) flash_read_uchar (info,
info->ext_addr + 3) << 8;
info->cfi_version |= (ushort) flash_read_uchar (info,
info->ext_addr + 4);
}
+
#ifdef DEBUG
- flash_printqry (info, 0);
+ flash_printqry (&qry);
#endif
+
switch (info->vendor) {
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
- default:
- info->cmd_reset = FLASH_CMD_RESET;
-#ifdef CFG_FLASH_PROTECTION
- /* read legacy lock/unlock bit from intel flash */
- if (info->ext_addr) {
- info->legacy_unlock = flash_read_uchar (info,
- info->ext_addr + 5) & 0x08;
- }
-#endif
+ cmdset_intel_init(info, &qry);
break;
case CFI_CMDSET_AMD_STANDARD:
case CFI_CMDSET_AMD_EXTENDED:
- info->cmd_reset = AMD_CMD_RESET;
- /* check if flash geometry needs reversal */
- if (num_erase_regions <= 1)
- break;
- /* reverse geometry if top boot part */
- if (info->cfi_version < 0x3131) {
- /* CFI < 1.1, try to guess from device id */
- if ((info->device_id & 0x80) != 0) {
- geometry_reversed = 1;
- }
- break;
- }
- /* CFI >= 1.1, deduct from top/bottom flag */
- /* note: ext_addr is valid since cfi_version > 0 */
- if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) {
- geometry_reversed = 1;
- }
+ cmdset_amd_init(info, &qry);
+ break;
+ default:
+ printf("CFI: Unknown command set 0x%x\n",
+ info->vendor);
+ /*
+ * Unfortunately, this means we don't know how
+ * to get the chip back to Read mode. Might
+ * as well try an Intel-style reset...
+ */
+ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+ return 0;
+ }
+
+ /* Do manufacturer-specific fixups */
+ switch (info->manufacturer_id) {
+ case 0x0001:
+ flash_fixup_amd(info, &qry);
+ break;
+ case 0x001f:
+ flash_fixup_atmel(info, &qry);
break;
}
@@ -1267,26 +1692,27 @@ ulong flash_get_size (ulong base, int banknum)
num_erase_regions, NUM_ERASE_REGIONS);
break;
}
- if (geometry_reversed)
- tmp = flash_read_long (info, 0,
- FLASH_OFFSET_ERASE_REGIONS +
- (num_erase_regions - 1 - i) * 4);
- else
- tmp = flash_read_long (info, 0,
- FLASH_OFFSET_ERASE_REGIONS +
- i * 4);
+
+ tmp = le32_to_cpu(qry.erase_region_info[i]);
+ debug("erase region %u: 0x%08lx\n", i, tmp);
+
+ erase_region_count = (tmp & 0xffff) + 1;
+ tmp >>= 16;
erase_region_size =
(tmp & 0xffff) ? ((tmp & 0xffff) * 256) : 128;
- tmp >>= 16;
- erase_region_count = (tmp & 0xffff) + 1;
debug ("erase_region_count = %d erase_region_size = %d\n",
erase_region_count, erase_region_size);
for (j = 0; j < erase_region_count; j++) {
+ if (sect_cnt >= CFG_MAX_FLASH_SECT) {
+ printf("ERROR: too many flash sectors\n");
+ break;
+ }
info->start[sect_cnt] = sector;
sector += (erase_region_size * size_ratio);
/*
- * Only read protection status from supported devices (intel...)
+ * Only read protection status from
+ * supported devices (intel...)
*/
switch (info->vendor) {
case CFI_CMDSET_INTEL_EXTENDED:
@@ -1297,7 +1723,8 @@ ulong flash_get_size (ulong base, int banknum)
FLASH_STATUS_PROTECT);
break;
default:
- info->protect[sect_cnt] = 0; /* default: not protected */
+ /* default: not protected */
+ info->protect[sect_cnt] = 0;
}
sect_cnt++;
@@ -1305,20 +1732,27 @@ ulong flash_get_size (ulong base, int banknum)
}
info->sector_count = sect_cnt;
+ info->size = 1 << qry.dev_size;
/* multiply the size by the number of chips */
- info->size = (1 << flash_read_uchar (info, FLASH_OFFSET_SIZE)) * size_ratio;
- info->buffer_size = (1 << flash_read_ushort (info, 0, FLASH_OFFSET_BUFFER_SIZE));
- tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_ETOUT);
- info->erase_blk_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_EMAX_TOUT)));
- tmp = (1 << flash_read_uchar (info, FLASH_OFFSET_WBTOUT)) *
- (1 << flash_read_uchar (info, FLASH_OFFSET_WBMAX_TOUT));
- info->buffer_write_tout = tmp / 1000 + (tmp % 1000 ? 1 : 0); /* round up when converting to ms */
- tmp = (1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT)) *
- (1 << flash_read_uchar (info, FLASH_OFFSET_WMAX_TOUT));
- info->write_tout = tmp / 1000 + (tmp % 1000 ? 1 : 0); /* round up when converting to ms */
+ info->size *= size_ratio;
+ info->buffer_size = 1 << le16_to_cpu(qry.max_buf_write_size);
+ tmp = 1 << qry.block_erase_timeout_typ;
+ info->erase_blk_tout = tmp *
+ (1 << qry.block_erase_timeout_max);
+ tmp = (1 << qry.buf_write_timeout_typ) *
+ (1 << qry.buf_write_timeout_max);
+
+ /* round up when converting to ms */
+ info->buffer_write_tout = (tmp + 999) / 1000;
+ tmp = (1 << qry.word_write_timeout_typ) *
+ (1 << qry.word_write_timeout_max);
+ /* round up when converting to ms */
+ info->write_tout = (tmp + 999) / 1000;
info->flash_id = FLASH_MAN_CFI;
- if ((info->interface == FLASH_CFI_X8X16) && (info->chipwidth == FLASH_CFI_BY8)) {
- info->portwidth >>= 1; /* XXX - Need to test on x8/x16 in parallel. */
+ if ((info->interface == FLASH_CFI_X8X16) &&
+ (info->chipwidth == FLASH_CFI_BY8)) {
+ /* XXX - Need to test on x8/x16 in parallel. */
+ info->portwidth >>= 1;
}
}
@@ -1326,203 +1760,106 @@ ulong flash_get_size (ulong base, int banknum)
return (info->size);
}
-/* loop through the sectors from the highest address
- * when the passed address is greater or equal to the sector address
- * we have a match
- */
-static flash_sect_t find_sector (flash_info_t * info, ulong addr)
-{
- flash_sect_t sector;
-
- for (sector = info->sector_count - 1; sector >= 0; sector--) {
- if (addr >= info->start[sector])
- break;
- }
- return sector;
-}
-
/*-----------------------------------------------------------------------
*/
-static int flash_write_cfiword (flash_info_t * info, ulong dest,
- cfiword_t cword)
+unsigned long flash_init (void)
{
- cfiptr_t ctladdr;
- cfiptr_t cptr;
- int flag;
-
- ctladdr.cp = flash_make_addr (info, 0, 0);
- cptr.cp = (uchar *) dest;
-
- /* Check if Flash is (sufficiently) erased */
- switch (info->portwidth) {
- case FLASH_CFI_8BIT:
- flag = ((cptr.cp[0] & cword.c) == cword.c);
- break;
- case FLASH_CFI_16BIT:
- flag = ((cptr.wp[0] & cword.w) == cword.w);
- break;
- case FLASH_CFI_32BIT:
- flag = ((cptr.lp[0] & cword.l) == cword.l);
- break;
- case FLASH_CFI_64BIT:
- flag = ((cptr.llp[0] & cword.ll) == cword.ll);
- break;
- default:
- return 2;
- }
- if (!flag)
- return 2;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
+ unsigned long size = 0;
+ int i;
- switch (info->vendor) {
- case CFI_CMDSET_INTEL_EXTENDED:
- case CFI_CMDSET_INTEL_STANDARD:
- flash_write_cmd (info, 0, 0, FLASH_CMD_CLEAR_STATUS);
- flash_write_cmd (info, 0, 0, FLASH_CMD_WRITE);
- break;
- case CFI_CMDSET_AMD_EXTENDED:
- case CFI_CMDSET_AMD_STANDARD:
- flash_unlock_seq (info, 0);
- flash_write_cmd (info, 0, AMD_ADDR_START, AMD_CMD_WRITE);
- break;
- }
+#ifdef CFG_FLASH_PROTECTION
+ char *s = getenv("unlock");
+#endif
- switch (info->portwidth) {
- case FLASH_CFI_8BIT:
- cptr.cp[0] = cword.c;
- break;
- case FLASH_CFI_16BIT:
- cptr.wp[0] = cword.w;
- break;
- case FLASH_CFI_32BIT:
- cptr.lp[0] = cword.l;
- break;
- case FLASH_CFI_64BIT:
- cptr.llp[0] = cword.ll;
- break;
- }
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
+ if (!flash_detect_legacy (bank_base[i], i))
+ flash_get_size (bank_base[i], i);
+ size += flash_info[i].size;
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+#ifndef CFG_FLASH_QUIET_TEST
+ printf ("## Unknown FLASH on Bank %d "
+ "- Size = 0x%08lx = %ld MB\n",
+ i+1, flash_info[i].size,
+ flash_info[i].size << 20);
+#endif /* CFG_FLASH_QUIET_TEST */
+ }
+#ifdef CFG_FLASH_PROTECTION
+ else if ((s != NULL) && (strcmp(s, "yes") == 0)) {
+ /*
+ * Only the U-Boot image and it's environment
+ * is protected, all other sectors are
+ * unprotected (unlocked) if flash hardware
+ * protection is used (CFG_FLASH_PROTECTION)
+ * and the environment variable "unlock" is
+ * set to "yes".
+ */
+ if (flash_info[i].legacy_unlock) {
+ int k;
- return flash_full_status_check (info, find_sector (info, dest),
- info->write_tout, "write");
-}
+ /*
+ * Disable legacy_unlock temporarily,
+ * since flash_real_protect would
+ * relock all other sectors again
+ * otherwise.
+ */
+ flash_info[i].legacy_unlock = 0;
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+ /*
+ * Legacy unlocking (e.g. Intel J3) ->
+ * unlock only one sector. This will
+ * unlock all sectors.
+ */
+ flash_real_protect (&flash_info[i], 0, 0);
-static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
- int len)
-{
- flash_sect_t sector;
- int cnt;
- int retcode;
- volatile cfiptr_t src;
- volatile cfiptr_t dst;
+ flash_info[i].legacy_unlock = 1;
- switch (info->vendor) {
- case CFI_CMDSET_INTEL_STANDARD:
- case CFI_CMDSET_INTEL_EXTENDED:
- src.cp = cp;
- dst.cp = (uchar *) dest;
- sector = find_sector (info, dest);
- flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
- flash_write_cmd (info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
- if ((retcode = flash_status_check (info, sector, info->buffer_write_tout,
- "write to buffer")) == ERR_OK) {
- /* reduce the number of loops by the width of the port */
- switch (info->portwidth) {
- case FLASH_CFI_8BIT:
- cnt = len;
- break;
- case FLASH_CFI_16BIT:
- cnt = len >> 1;
- break;
- case FLASH_CFI_32BIT:
- cnt = len >> 2;
- break;
- case FLASH_CFI_64BIT:
- cnt = len >> 3;
- break;
- default:
- return ERR_INVAL;
- break;
- }
- flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
- while (cnt-- > 0) {
- switch (info->portwidth) {
- case FLASH_CFI_8BIT:
- *dst.cp++ = *src.cp++;
- break;
- case FLASH_CFI_16BIT:
- *dst.wp++ = *src.wp++;
- break;
- case FLASH_CFI_32BIT:
- *dst.lp++ = *src.lp++;
- break;
- case FLASH_CFI_64BIT:
- *dst.llp++ = *src.llp++;
- break;
- default:
- return ERR_INVAL;
- break;
- }
+ /*
+ * Manually mark other sectors as
+ * unlocked (unprotected)
+ */
+ for (k = 1; k < flash_info[i].sector_count; k++)
+ flash_info[i].protect[k] = 0;
+ } else {
+ /*
+ * No legancy unlocking -> unlock all sectors
+ */
+ flash_protect (FLAG_PROTECT_CLEAR,
+ flash_info[i].start[0],
+ flash_info[i].start[0]
+ + flash_info[i].size - 1,
+ &flash_info[i]);
}
- flash_write_cmd (info, sector, 0,
- FLASH_CMD_WRITE_BUFFER_CONFIRM);
- retcode = flash_full_status_check (info, sector,
- info->buffer_write_tout,
- "buffer write");
}
- return retcode;
-
- case CFI_CMDSET_AMD_STANDARD:
- case CFI_CMDSET_AMD_EXTENDED:
- src.cp = cp;
- dst.cp = (uchar *) dest;
- sector = find_sector (info, dest);
-
- flash_unlock_seq(info,0);
- flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_TO_BUFFER);
+#endif /* CFG_FLASH_PROTECTION */
+ }
- switch (info->portwidth) {
- case FLASH_CFI_8BIT:
- cnt = len;
- flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
- while (cnt-- > 0) *dst.cp++ = *src.cp++;
- break;
- case FLASH_CFI_16BIT:
- cnt = len >> 1;
- flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
- while (cnt-- > 0) *dst.wp++ = *src.wp++;
- break;
- case FLASH_CFI_32BIT:
- cnt = len >> 2;
- flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
- while (cnt-- > 0) *dst.lp++ = *src.lp++;
- break;
- case FLASH_CFI_64BIT:
- cnt = len >> 3;
- flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
- while (cnt-- > 0) *dst.llp++ = *src.llp++;
- break;
- default:
- return ERR_INVAL;
- }
+ /* Monitor protection ON by default */
+#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + monitor_flash_len - 1,
+ flash_get_info(CFG_MONITOR_BASE));
+#endif
- flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_BUFFER_CONFIRM);
- retcode = flash_full_status_check (info, sector, info->buffer_write_tout,
- "buffer write");
- return retcode;
+ /* Environment protection ON by default */
+#ifdef CFG_ENV_IS_IN_FLASH
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ flash_get_info(CFG_ENV_ADDR));
+#endif
- default:
- debug ("Unknown Command Set\n");
- return ERR_INVAL;
- }
+ /* Redundant environment protection ON by default */
+#ifdef CFG_ENV_ADDR_REDUND
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+ flash_get_info(CFG_ENV_ADDR_REDUND));
+#endif
+ return (size);
}
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
#endif /* CFG_FLASH_CFI */
diff --git a/drivers/mtd/jedec_flash.c b/drivers/mtd/jedec_flash.c
new file mode 100644
index 0000000..94e87cb
--- /dev/null
+++ b/drivers/mtd/jedec_flash.c
@@ -0,0 +1,311 @@
+/*
+ * (C) Copyright 2007
+ * Michael Schwingen, <michael@schwingen.org>
+ *
+ * based in great part on jedec_probe.c from linux kernel:
+ * (C) 2000 Red Hat. GPL'd.
+ * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* The DEBUG define must be before common to enable debugging */
+/*#define DEBUG*/
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <environment.h>
+
+#define P_ID_AMD_STD CFI_CMDSET_AMD_LEGACY
+
+/* Manufacturers */
+#define MANUFACTURER_AMD 0x0001
+#define MANUFACTURER_SST 0x00BF
+
+/* AMD */
+#define AM29DL800BB 0x22C8
+#define AM29DL800BT 0x224A
+
+#define AM29F800BB 0x2258
+#define AM29F800BT 0x22D6
+#define AM29LV400BB 0x22BA
+#define AM29LV400BT 0x22B9
+#define AM29LV800BB 0x225B
+#define AM29LV800BT 0x22DA
+#define AM29LV160DT 0x22C4
+#define AM29LV160DB 0x2249
+#define AM29F017D 0x003D
+#define AM29F016D 0x00AD
+#define AM29F080 0x00D5
+#define AM29F040 0x00A4
+#define AM29LV040B 0x004F
+#define AM29F032B 0x0041
+#define AM29F002T 0x00B0
+
+/* SST */
+#define SST39LF800 0x2781
+#define SST39LF160 0x2782
+#define SST39VF1601 0x234b
+#define SST39LF512 0x00D4
+#define SST39LF010 0x00D5
+#define SST39LF020 0x00D6
+#define SST39LF040 0x00D7
+#define SST39SF010A 0x00B5
+#define SST39SF020A 0x00B6
+
+
+/*
+ * Unlock address sets for AMD command sets.
+ * Intel command sets use the MTD_UADDR_UNNECESSARY.
+ * Each identifier, except MTD_UADDR_UNNECESSARY, and
+ * MTD_UADDR_NO_SUPPORT must be defined below in unlock_addrs[].
+ * MTD_UADDR_NOT_SUPPORTED must be 0 so that structure
+ * initialization need not require initializing all of the
+ * unlock addresses for all bit widths.
+ */
+enum uaddr {
+ MTD_UADDR_NOT_SUPPORTED = 0, /* data width not supported */
+ MTD_UADDR_0x0555_0x02AA,
+ MTD_UADDR_0x0555_0x0AAA,
+ MTD_UADDR_0x5555_0x2AAA,
+ MTD_UADDR_0x0AAA_0x0555,
+ MTD_UADDR_DONT_CARE, /* Requires an arbitrary address */
+ MTD_UADDR_UNNECESSARY, /* Does not require any address */
+};
+
+
+struct unlock_addr {
+ u32 addr1;
+ u32 addr2;
+};
+
+
+/*
+ * I don't like the fact that the first entry in unlock_addrs[]
+ * exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore,
+ * should not be used. The problem is that structures with
+ * initializers have extra fields initialized to 0. It is _very_
+ * desireable to have the unlock address entries for unsupported
+ * data widths automatically initialized - that means that
+ * MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here
+ * must go unused.
+ */
+static const struct unlock_addr unlock_addrs[] = {
+ [MTD_UADDR_NOT_SUPPORTED] = {
+ .addr1 = 0xffff,
+ .addr2 = 0xffff
+ },
+
+ [MTD_UADDR_0x0555_0x02AA] = {
+ .addr1 = 0x0555,
+ .addr2 = 0x02aa
+ },
+
+ [MTD_UADDR_0x0555_0x0AAA] = {
+ .addr1 = 0x0555,
+ .addr2 = 0x0aaa
+ },
+
+ [MTD_UADDR_0x5555_0x2AAA] = {
+ .addr1 = 0x5555,
+ .addr2 = 0x2aaa
+ },
+
+ [MTD_UADDR_0x0AAA_0x0555] = {
+ .addr1 = 0x0AAA,
+ .addr2 = 0x0555
+ },
+
+ [MTD_UADDR_DONT_CARE] = {
+ .addr1 = 0x0000, /* Doesn't matter which address */
+ .addr2 = 0x0000 /* is used - must be last entry */
+ },
+
+ [MTD_UADDR_UNNECESSARY] = {
+ .addr1 = 0x0000,
+ .addr2 = 0x0000
+ }
+};
+
+
+struct amd_flash_info {
+ const __u16 mfr_id;
+ const __u16 dev_id;
+ const char *name;
+ const int DevSize;
+ const int NumEraseRegions;
+ const int CmdSet;
+ const __u8 uaddr[4]; /* unlock addrs for 8, 16, 32, 64 */
+ const ulong regions[6];
+};
+
+#define ERASEINFO(size,blocks) (size<<8)|(blocks-1)
+
+#define SIZE_64KiB 16
+#define SIZE_128KiB 17
+#define SIZE_256KiB 18
+#define SIZE_512KiB 19
+#define SIZE_1MiB 20
+#define SIZE_2MiB 21
+#define SIZE_4MiB 22
+#define SIZE_8MiB 23
+
+static const struct amd_flash_info jedec_table[] = {
+#ifdef CFG_FLASH_LEGACY_256Kx8
+ {
+ .mfr_id = MANUFACTURER_SST,
+ .dev_id = SST39LF020,
+ .name = "SST 39LF020",
+ .uaddr = {
+ [0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+ },
+ .DevSize = SIZE_256KiB,
+ .CmdSet = P_ID_AMD_STD,
+ .NumEraseRegions= 1,
+ .regions = {
+ ERASEINFO(0x01000,64),
+ }
+ },
+#endif
+#ifdef CFG_FLASH_LEGACY_512Kx8
+ {
+ .mfr_id = MANUFACTURER_AMD,
+ .dev_id = AM29LV040B,
+ .name = "AMD AM29LV040B",
+ .uaddr = {
+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+ },
+ .DevSize = SIZE_512KiB,
+ .CmdSet = P_ID_AMD_STD,
+ .NumEraseRegions= 1,
+ .regions = {
+ ERASEINFO(0x10000,8),
+ }
+ },
+ {
+ .mfr_id = MANUFACTURER_SST,
+ .dev_id = SST39LF040,
+ .name = "SST 39LF040",
+ .uaddr = {
+ [0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+ },
+ .DevSize = SIZE_512KiB,
+ .CmdSet = P_ID_AMD_STD,
+ .NumEraseRegions= 1,
+ .regions = {
+ ERASEINFO(0x01000,128),
+ }
+ },
+#endif
+};
+
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+
+static inline void fill_info(flash_info_t *info, const struct amd_flash_info *jedec_entry, ulong base)
+{
+ int i,j;
+ int sect_cnt;
+ int size_ratio;
+ int total_size;
+ enum uaddr uaddr_idx;
+
+ size_ratio = info->portwidth / info->chipwidth;
+
+ debug("Found JEDEC Flash: %s\n", jedec_entry->name);
+ info->vendor = jedec_entry->CmdSet;
+ /* Todo: do we need device-specific timeouts? */
+ info->erase_blk_tout = 30000;
+ info->buffer_write_tout = 1000;
+ info->write_tout = 100;
+ info->name = jedec_entry->name;
+
+ /* copy unlock addresses from device table to CFI info struct. This
+ is just here because the addresses are in the table anyway - if
+ the flash is not detected due to wrong unlock addresses,
+ flash_detect_legacy would have to try all of them before we even
+ get here. */
+ switch(info->chipwidth) {
+ case FLASH_CFI_8BIT:
+ uaddr_idx = jedec_entry->uaddr[0];
+ break;
+ case FLASH_CFI_16BIT:
+ uaddr_idx = jedec_entry->uaddr[1];
+ break;
+ case FLASH_CFI_32BIT:
+ uaddr_idx = jedec_entry->uaddr[2];
+ break;
+ default:
+ uaddr_idx = MTD_UADDR_NOT_SUPPORTED;
+ break;
+ }
+
+ debug("unlock address index %d\n", uaddr_idx);
+ info->addr_unlock1 = unlock_addrs[uaddr_idx].addr1;
+ info->addr_unlock2 = unlock_addrs[uaddr_idx].addr2;
+ debug("unlock addresses are 0x%x/0x%x\n", info->addr_unlock1, info->addr_unlock2);
+
+ sect_cnt = 0;
+ total_size = 0;
+ for (i = 0; i < jedec_entry->NumEraseRegions; i++) {
+ ulong erase_region_size = jedec_entry->regions[i] >> 8;
+ ulong erase_region_count = (jedec_entry->regions[i] & 0xff) + 1;
+
+ total_size += erase_region_size * erase_region_count;
+ debug ("erase_region_count = %d erase_region_size = %d\n",
+ erase_region_count, erase_region_size);
+ for (j = 0; j < erase_region_count; j++) {
+ if (sect_cnt >= CFG_MAX_FLASH_SECT) {
+ printf("ERROR: too many flash sectors\n");
+ break;
+ }
+ info->start[sect_cnt] = base;
+ base += (erase_region_size * size_ratio);
+ sect_cnt++;
+ }
+ }
+ info->sector_count = sect_cnt;
+ info->size = total_size * size_ratio;
+}
+
+/*-----------------------------------------------------------------------
+ * match jedec ids against table. If a match is found, fill flash_info entry
+ */
+int jedec_flash_match(flash_info_t *info, ulong base)
+{
+ int ret = 0;
+ int i;
+ ulong mask = 0xFFFF;
+ if (info->chipwidth == 1)
+ mask = 0xFF;
+
+ for (i = 0; i < ARRAY_SIZE(jedec_table); i++) {
+ if ((jedec_table[i].mfr_id & mask) == (info->manufacturer_id & mask) &&
+ (jedec_table[i].dev_id & mask) == (info->device_id & mask)) {
+ fill_info(info, &jedec_table[i], base);
+ ret = 1;
+ break;
+ }
+ }
+ return ret;
+}
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 1e77884..68e45e1 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -112,6 +112,29 @@ fsl_pci_init(struct pci_controller *hose)
pci_hose_read_config_word(hose, dev, PCI_LTSSM, &ltssm);
enabled = ltssm >= PCI_LTSSM_L0;
+#ifdef CONFIG_FSL_PCIE_RESET
+ if (ltssm == 1) {
+ int i;
+ debug("....PCIe link error. "
+ "LTSSM=0x%02x.", ltssm);
+ pci->pdb_stat |= 0x08000000; /* assert PCIe reset */
+ temp32 = pci->pdb_stat;
+ udelay(100);
+ debug(" Asserting PCIe reset @%x = %x\n",
+ &pci->pdb_stat, pci->pdb_stat);
+ pci->pdb_stat &= ~0x08000000; /* clear reset */
+ asm("sync;isync");
+ for (i=0; i<100 && ltssm < PCI_LTSSM_L0; i++) {
+ pci_hose_read_config_word(hose, dev, PCI_LTSSM,
+ &ltssm);
+ udelay(1000);
+ debug("....PCIe link error. "
+ "LTSSM=0x%02x.\n", ltssm);
+ }
+ enabled = ltssm >= PCI_LTSSM_L0;
+ }
+#endif
+
if (!enabled) {
debug("....PCIE link error. Skipping scan."
"LTSSM=0x%02x\n", ltssm);
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 55528c8..bba1ab8 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -30,6 +30,7 @@ COBJS-y += pxa_pcmcia.o
COBJS-y += rpx_pcmcia.o
COBJS-y += ti_pci1410a.o
COBJS-y += tqm8xx_pcmcia.o
+COBJS-y += marubun_pcmcia.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/pcmcia/marubun_pcmcia.c b/drivers/pcmcia/marubun_pcmcia.c
new file mode 100644
index 0000000..7b112af
--- /dev/null
+++ b/drivers/pcmcia/marubun_pcmcia.c
@@ -0,0 +1,113 @@
+/*
+ * Marubun MR-SHPC-01 PCMCIA controller device driver
+ *
+ * (c) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <config.h>
+#include <pcmcia.h>
+#include <asm/io.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#define CONFIG_PCMCIA
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+#define CONFIG_PCMCIA
+#endif
+
+#if defined(CONFIG_PCMCIA) \
+ && (defined(CONFIG_MARUBUN_PCCARD))
+
+/* MR-SHPC-01 register */
+#define MRSHPC_MODE (CFG_MARUBUN_MRSHPC + 4)
+#define MRSHPC_OPTION (CFG_MARUBUN_MRSHPC + 6)
+#define MRSHPC_CSR (CFG_MARUBUN_MRSHPC + 8)
+#define MRSHPC_ISR (CFG_MARUBUN_MRSHPC + 10)
+#define MRSHPC_ICR (CFG_MARUBUN_MRSHPC + 12)
+#define MRSHPC_CPWCR (CFG_MARUBUN_MRSHPC + 14)
+#define MRSHPC_MW0CR1 (CFG_MARUBUN_MRSHPC + 16)
+#define MRSHPC_MW1CR1 (CFG_MARUBUN_MRSHPC + 18)
+#define MRSHPC_IOWCR1 (CFG_MARUBUN_MRSHPC + 20)
+#define MRSHPC_MW0CR2 (CFG_MARUBUN_MRSHPC + 22)
+#define MRSHPC_MW1CR2 (CFG_MARUBUN_MRSHPC + 24)
+#define MRSHPC_IOWCR2 (CFG_MARUBUN_MRSHPC + 26)
+#define MRSHPC_CDCR (CFG_MARUBUN_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (CFG_MARUBUN_MRSHPC + 30)
+
+int pcmcia_on (void)
+{
+ printf("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+ /* Init */
+ outw( 0x0000 , MRSHPC_MODE );
+
+ if ((inw(MRSHPC_CSR) & 0x000c) == 0){ /* if card detect is true */
+ if ((inw(MRSHPC_CSR) & 0x0080) == 0){
+ outw(0x0674 ,MRSHPC_CPWCR); /* Card Vcc is 3.3v? */
+ }else{
+ outw(0x0678 ,MRSHPC_CPWCR); /* Card Vcc is 5V */
+ }
+ udelay( 100000 ); /* wait for power on */
+ }else{
+ return 1;
+ }
+ /*
+ * PC-Card window open
+ * flag == COMMON/ATTRIBUTE/IO
+ */
+ /* common window open */
+ outw(0x8a84,MRSHPC_MW0CR1); /* window 0xb8400000 */
+ if ((inw(MRSHPC_CSR) & 0x4000) != 0)
+ outw(0x0b00,MRSHPC_MW0CR2); /* common mode & bus width 16bit SWAP = 1 */
+ else
+ outw(0x0300,MRSHPC_MW0CR2); /* common mode & bus width 16bit SWAP = 0 */
+
+ /* attribute window open */
+ outw(0x8a85,MRSHPC_MW1CR1); /* window 0xb8500000 */
+ if ((inw(MRSHPC_CSR) & 0x4000) != 0)
+ outw(0x0a00,MRSHPC_MW1CR2); /* attribute mode & bus width 16bit SWAP = 1 */
+ else
+ outw(0x0200,MRSHPC_MW1CR2); /* attribute mode & bus width 16bit SWAP = 0 */
+
+ /* I/O window open */
+ outw(0x8a86,MRSHPC_IOWCR1); /* I/O window 0xb8600000 */
+ outw(0x0008,MRSHPC_CDCR); /* I/O card mode */
+ if ((inw(MRSHPC_CSR) & 0x4000) != 0)
+ outw(0x0a00,MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1 */
+ else
+ outw(0x0200,MRSHPC_IOWCR2); /* bus width 16bit SWAP = 0 */
+
+ outw(0x0000,MRSHPC_ISR);
+ outw(0x2000,MRSHPC_ICR);
+ outb(0x00,(CFG_MARUBUN_MW2 + 0x206));
+ outb(0x42,(CFG_MARUBUN_MW2 + 0x200));
+
+ return 0;
+}
+
+int pcmcia_off (void)
+{
+ printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+ return 0;
+}
+
+#endif /* CONFIG_MARUBUN_PCCARD */
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 735c630..ee2b780 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -35,6 +35,7 @@ COBJS-y += serial_max3100.o
COBJS-y += serial_pl010.o
COBJS-y += serial_pl011.o
COBJS-y += serial_xuartlite.o
+COBJS-y += serial_sh.o
COBJS-y += usbtty.o
COBJS := $(COBJS-y)
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
new file mode 100644
index 0000000..ee44ba2
--- /dev/null
+++ b/drivers/serial/serial_sh.c
@@ -0,0 +1,177 @@
+/*
+ * SuperH SCIF device driver.
+ * Copyright (c) 2007 Nobuhiro Iwamatsu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+#ifdef CFG_SCIF_CONSOLE
+
+#if defined (CONFIG_CONS_SCIF0)
+#define SCIF_BASE SCIF0_BASE
+#elif defined (CONFIG_CONS_SCIF1)
+#define SCIF_BASE SCIF1_BASE
+#else
+#error "Default SCIF doesn't set....."
+#endif
+
+#define SCSMR (vu_short *)(SCIF_BASE + 0x0)
+#define SCBRR (vu_char *)(SCIF_BASE + 0x4)
+#define SCSCR (vu_short *)(SCIF_BASE + 0x8)
+#define SCFTDR (vu_char *)(SCIF_BASE + 0xC)
+#define SCFSR (vu_short *)(SCIF_BASE + 0x10)
+#define SCFRDR (vu_char *)(SCIF_BASE + 0x14)
+#define SCFCR (vu_short *)(SCIF_BASE + 0x18)
+#define SCFDR (vu_short *)(SCIF_BASE + 0x1C)
+#if defined(CONFIG_SH4A)
+#define SCRFDR (vu_short *)(SCIF_BASE + 0x20)
+#define SCSPTR (vu_short *)(SCIF_BASE + 0x24)
+#define SCLSR (vu_short *)(SCIF_BASE + 0x28)
+#define SCRER (vu_short *)(SCIF_BASE + 0x2C)
+#elif defined (CONFIG_SH4)
+#define SCSPTR (vu_short *)(SCIF_BASE + 0x20)
+#define SCLSR (vu_short *)(SCIF_BASE + 0x24)
+#elif defined (CONFIG_SH3)
+#define SCLSR (vu_short *)(SCIF_BASE + 0x24)
+#endif
+
+#define SCR_RE (1 << 4)
+#define SCR_TE (1 << 5)
+#define FCR_RFRST (1 << 1) /* RFCL */
+#define FCR_TFRST (1 << 2) /* TFCL */
+#define FSR_DR (1 << 0)
+#define FSR_RDF (1 << 1)
+#define FSR_FER (1 << 3)
+#define FSR_BRK (1 << 4)
+#define FSR_FER (1 << 3)
+#define FSR_TEND (1 << 6)
+#define FSR_ER (1 << 7)
+
+/*----------------------------------------------------------------------*/
+
+void serial_setbrg (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ int divisor = gd->baudrate * 32;
+
+ *SCBRR = (CONFIG_SYS_CLK_FREQ + (divisor / 2)) /
+ (gd->baudrate * 32) - 1;
+}
+
+int serial_init (void)
+{
+ *SCSCR = (SCR_RE | SCR_TE);
+ *SCSMR = 0 ;
+ *SCSMR = 0;
+ *SCFCR = (FCR_RFRST | FCR_TFRST);
+ *SCFCR;
+ *SCFCR = 0;
+
+ serial_setbrg();
+ return 0;
+}
+
+static int serial_tx_fifo_level (void)
+{
+ return (*SCFDR >> 8) & 0x1F;
+}
+
+static int serial_rx_fifo_level (void)
+{
+ return (*SCFDR >> 0) & 0x1F;
+}
+
+void serial_raw_putc (const char c)
+{
+ unsigned int fsr_bits_to_clear;
+
+ while (1) {
+ if (*SCFSR & FSR_TEND) { /* Tx fifo is empty */
+ fsr_bits_to_clear = FSR_TEND;
+ break;
+ }
+ }
+
+ *SCFTDR = c;
+ if (fsr_bits_to_clear != 0)
+ *SCFSR &= ~fsr_bits_to_clear;
+}
+
+void serial_putc (const char c)
+{
+ if (c == '\n')
+ serial_raw_putc ('\r');
+ serial_raw_putc (c);
+}
+
+void serial_puts (const char *s)
+{
+ char c;
+ while ((c = *s++) != 0)
+ serial_putc (c);
+}
+
+int serial_tstc (void)
+{
+ return serial_rx_fifo_level() ? 1 : 0;
+}
+
+#define FSR_ERR_CLEAR 0x0063
+#define RDRF_CLEAR 0x00fc
+#define LSR_ORER 1
+void handle_error( void ){
+
+ (void)*SCFSR ;
+ *SCFSR = FSR_ERR_CLEAR ;
+ (void)*SCLSR ;
+ *SCLSR = 0x00 ;
+}
+
+int serial_getc_check( void ){
+ unsigned short status;
+
+ status = *SCFSR ;
+
+ if (status & (FSR_FER | FSR_FER | FSR_ER | FSR_BRK))
+ handle_error();
+ if( *SCLSR & LSR_ORER )
+ handle_error();
+ return (status & ( FSR_DR | FSR_RDF ));
+}
+
+int serial_getc (void)
+{
+ unsigned short status ;
+ char ch;
+ while(!serial_getc_check());
+
+ ch = *SCFRDR;
+ status = *SCFSR ;
+
+ *SCFSR = RDRF_CLEAR ;
+
+ if (status & (FSR_FER | FSR_FER | FSR_ER | FSR_BRK))
+ handle_error();
+
+ if( *SCLSR & LSR_ORER )
+ handle_error();
+
+ return ch ;
+}
+
+#endif /* CFG_SCIF_CONSOLE */
diff --git a/examples/Makefile b/examples/Makefile
index e9b4974..71a8c7f 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -61,6 +61,11 @@ ifeq ($(ARCH),avr32)
LOAD_ADDR = 0x00000000
endif
+ifeq ($(ARCH),sh)
+LOAD_ADDR = 0x8C000000
+endif
+
+
include $(TOPDIR)/config.mk
ELF = hello_world
diff --git a/examples/stubs.c b/examples/stubs.c
index 26df6e0..571c4d5 100644
--- a/examples/stubs.c
+++ b/examples/stubs.c
@@ -132,7 +132,7 @@ gd_t *global_data;
*/
#define EXPORT_FUNC(x) \
asm volatile ( \
-" .globl _" #x "\n_" \
+" .globl _" #x "\n_" \
#x ":\n" \
" P0 = [P5 + %0]\n" \
" P0 = [P0 + %1]\n" \
@@ -151,6 +151,22 @@ gd_t *global_data;
: \
: "i"(offsetof(gd_t, jt)), "i"(XF_ ##x) \
: "r8");
+#elif defined(CONFIG_SH)
+/*
+ * r13 holds the pointer to the global_data. r1 is a call clobbered.
+ */
+#define EXPORT_FUNC(x) \
+ asm volatile ( \
+ " .align 2\n" \
+ " .globl " #x "\n" \
+ #x ":\n" \
+ " mov r13, r1\n" \
+ " add %0, r1\n" \
+ " add %1, r1\n" \
+ " jmp @r1\n" \
+ " nop\n" \
+ " nop\n" \
+ : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r1");
#else
#error stubs definition missing for this architecture
#endif
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index 47c18e7..029b7f9 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -34,6 +34,32 @@ static inline void sync(void)
}
/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE (0)
+#define MAP_WRCOMBINE (0)
+#define MAP_WRBACK (0)
+#define MAP_WRTHROUGH (0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+ return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
+/*
* Generic virtual read/write. Note that we don't support half-word
* read/writes. We define __arch_*[bl] here, and leave __arch_*w
* to the architecture specific code.
diff --git a/include/asm-avr32/arch-at32ap700x/chip-features.h b/include/asm-avr32/arch-at32ap700x/chip-features.h
new file mode 100644
index 0000000..29b1fd6
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap700x/chip-features.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_ARCH_CHIP_FEATURES_H__
+#define __ASM_AVR32_ARCH_CHIP_FEATURES_H__
+
+/* Currently, all the AP700x chips have these */
+#define AT32AP700x_CHIP_HAS_USART
+#define AT32AP700x_CHIP_HAS_MMCI
+
+/* Only AP7000 has ethernet interface */
+#ifdef CONFIG_AT32AP7000
+#define AT32AP700x_CHIP_HAS_MACB
+#endif
+
+#endif /* __ASM_AVR32_ARCH_CHIP_FEATURES_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/clk.h b/include/asm-avr32/arch-at32ap700x/clk.h
index 7e20d97..ea84c08 100644
--- a/include/asm-avr32/arch-at32ap7000/clk.h
+++ b/include/asm-avr32/arch-at32ap700x/clk.h
@@ -22,6 +22,8 @@
#ifndef __ASM_AVR32_ARCH_CLK_H__
#define __ASM_AVR32_ARCH_CLK_H__
+#include <asm/arch/chip-features.h>
+
#ifdef CONFIG_PLL
#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
#else
@@ -50,10 +52,13 @@ static inline unsigned long get_sdram_clk_rate(void)
{
return get_hsb_clk_rate();
}
+#ifdef AT32AP700x_CHIP_HAS_USART
static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
{
return get_pba_clk_rate();
}
+#endif
+#ifdef AT32AP700x_CHIP_HAS_USART
static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
{
return get_pbb_clk_rate();
@@ -62,9 +67,12 @@ static inline unsigned long get_macb_hclk_rate(unsigned int dev_id)
{
return get_hsb_clk_rate();
}
+#endif
+#ifdef AT32AP700x_CHIP_HAS_MMCI
static inline unsigned long get_mci_clk_rate(void)
{
return get_pbb_clk_rate();
}
+#endif
#endif /* __ASM_AVR32_ARCH_CLK_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/gpio.h b/include/asm-avr32/arch-at32ap700x/gpio.h
index e4812d4..b10a3e4 100644
--- a/include/asm-avr32/arch-at32ap7000/gpio.h
+++ b/include/asm-avr32/arch-at32ap700x/gpio.h
@@ -22,6 +22,7 @@
#ifndef __ASM_AVR32_ARCH_GPIO_H__
#define __ASM_AVR32_ARCH_GPIO_H__
+#include <asm/arch/chip-features.h>
#include <asm/arch/memory-map.h>
#define NR_GPIO_CONTROLLERS 5
@@ -201,12 +202,19 @@ void gpio_select_periph_A(unsigned int pin, int use_pullup);
void gpio_select_periph_B(unsigned int pin, int use_pullup);
void gpio_enable_ebi(void);
+
+#ifdef AT32AP700x_CHIP_HAS_USART
void gpio_enable_usart0(void);
void gpio_enable_usart1(void);
void gpio_enable_usart2(void);
void gpio_enable_usart3(void);
+#endif
+#ifdef AT32AP700x_CHIP_HAS_MACB
void gpio_enable_macb0(void);
void gpio_enable_macb1(void);
+#endif
+#ifdef AT32AP700x_CHIP_HAS_MMCI
void gpio_enable_mmci(void);
+#endif
#endif /* __ASM_AVR32_ARCH_GPIO_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/hmatrix2.h b/include/asm-avr32/arch-at32ap700x/hmatrix2.h
index b0e787a..b0e787a 100644
--- a/include/asm-avr32/arch-at32ap7000/hmatrix2.h
+++ b/include/asm-avr32/arch-at32ap700x/hmatrix2.h
diff --git a/include/asm-avr32/arch-at32ap7000/memory-map.h b/include/asm-avr32/arch-at32ap700x/memory-map.h
index 5513e88..5513e88 100644
--- a/include/asm-avr32/arch-at32ap7000/memory-map.h
+++ b/include/asm-avr32/arch-at32ap700x/memory-map.h
diff --git a/include/asm-avr32/arch-at32ap7000/mmc.h b/include/asm-avr32/arch-at32ap700x/mmc.h
index fcfbbb3..fcfbbb3 100644
--- a/include/asm-avr32/arch-at32ap7000/mmc.h
+++ b/include/asm-avr32/arch-at32ap700x/mmc.h
diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h
index 3c0d569..ba14674 100644
--- a/include/asm-avr32/io.h
+++ b/include/asm-avr32/io.h
@@ -93,4 +93,36 @@ static inline void sync(void)
{
}
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ *
+ * This implementation works for memory below 512MiB (flash, etc.) as
+ * well as above 3.5GiB (internal peripherals.)
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE (0)
+#define MAP_WRCOMBINE (1 << 7)
+#define MAP_WRBACK (MAP_WRCOMBINE | (1 << 9))
+#define MAP_WRTHROUGH (MAP_WRBACK | (1 << 0))
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+ if (flags == MAP_WRBACK)
+ return (void *)P1SEGADDR(paddr);
+ else
+ return (void *)P2SEGADDR(paddr);
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long len)
+{
+
+}
+
#endif /* __ASM_AVR32_IO_H */
diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h
index 332d2c6..512e13d 100644
--- a/include/asm-blackfin/io.h
+++ b/include/asm-blackfin/io.h
@@ -41,6 +41,32 @@ static inline void sync(void)
}
/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE (0)
+#define MAP_WRCOMBINE (0)
+#define MAP_WRBACK (0)
+#define MAP_WRTHROUGH (0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+ return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
+/*
* These are for ISA/PCI shared memory _only_ and should never be used
* on any other type of memory, including Zorro memory. They are meant to
* access the bus in the bus byte order which is little-endian!.
diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h
index e64d788..db4f442 100644
--- a/include/asm-i386/io.h
+++ b/include/asm-i386/io.h
@@ -205,4 +205,30 @@ static inline void sync(void)
{
}
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE (0)
+#define MAP_WRCOMBINE (0)
+#define MAP_WRBACK (0)
+#define MAP_WRTHROUGH (0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+ return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
#endif
diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h
index e14a581..91d7592 100644
--- a/include/asm-m68k/io.h
+++ b/include/asm-m68k/io.h
@@ -28,6 +28,20 @@
#include <asm/byteorder.h>
+/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
+ * two accesses to memory, which may be undesirable for some devices.
+ */
+#define __raw_readb(addr) \
+ ({ u8 __v = (*(volatile u8 *) (addr)); __v; })
+#define __raw_readw(addr) \
+ ({ u16 __v = (*(volatile u16 *) (addr)); __v; })
+#define __raw_readl(addr) \
+ ({ u32 __v = (*(volatile u32 *) (addr)); __v; })
+
+#define __raw_writeb(addr,b) (void)((*(volatile u8 *) (addr)) = (b))
+#define __raw_writew(addr,w) (void)((*(volatile u16 *) (addr)) = (w))
+#define __raw_writel(addr,l) (void)((*(volatile u32 *) (addr)) = (l))
+
#define readb(addr) in_8((volatile u8 *)(addr))
#define writeb(b,addr) out_8((volatile u8 *)(addr), (b))
#if !defined(__BIG_ENDIAN)
@@ -218,4 +232,31 @@ static inline void sync(void)
* compatibility (CFI driver)
*/
}
+
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE (0)
+#define MAP_WRCOMBINE (0)
+#define MAP_WRBACK (0)
+#define MAP_WRTHROUGH (0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+ return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
#endif /* __ASM_M68K_IO_H__ */
diff --git a/include/asm-microblaze/io.h b/include/asm-microblaze/io.h
index 1c77ade..90d1842 100644
--- a/include/asm-microblaze/io.h
+++ b/include/asm-microblaze/io.h
@@ -129,4 +129,30 @@ static inline void sync(void)
{
}
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE (0)
+#define MAP_WRCOMBINE (0)
+#define MAP_WRBACK (0)
+#define MAP_WRTHROUGH (0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+ return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
#endif /* __MICROBLAZE_IO_H__ */
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
index 1e060f7..e27d1f1 100644
--- a/include/asm-mips/io.h
+++ b/include/asm-mips/io.h
@@ -465,4 +465,30 @@ static inline void sync(void)
{
}
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE (0)
+#define MAP_WRCOMBINE (0)
+#define MAP_WRBACK (0)
+#define MAP_WRTHROUGH (0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+ return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
#endif /* _ASM_IO_H */
diff --git a/include/asm-nios/io.h b/include/asm-nios/io.h
index d77695a..6fc339f 100644
--- a/include/asm-nios/io.h
+++ b/include/asm-nios/io.h
@@ -23,6 +23,14 @@
#ifndef __ASM_NIOS_IO_H_
#define __ASM_NIOS_IO_H_
+#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v))
+#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
+#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
+
+#define __raw_readb(a) (*(volatile unsigned char *)(a))
+#define __raw_readw(a) (*(volatile unsigned short *)(a))
+#define __raw_readl(a) (*(volatile unsigned int *)(a))
+
#define readb(addr)\
({unsigned char val;\
asm volatile( " pfxio 0 \n"\
@@ -101,4 +109,30 @@ static inline void sync(void)
{
}
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE (0)
+#define MAP_WRCOMBINE (0)
+#define MAP_WRBACK (0)
+#define MAP_WRTHROUGH (0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+ return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
#endif /* __ASM_NIOS_IO_H_ */
diff --git a/include/asm-nios2/io.h b/include/asm-nios2/io.h
index 5bb5322..a52b95c 100644
--- a/include/asm-nios2/io.h
+++ b/include/asm-nios2/io.h
@@ -29,10 +29,44 @@ static inline void sync(void)
__asm__ __volatile__ ("sync" : : : "memory");
}
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE (0)
+#define MAP_WRCOMBINE (0)
+#define MAP_WRBACK (0)
+#define MAP_WRTHROUGH (0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+ return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
extern unsigned char inb (unsigned char *port);
extern unsigned short inw (unsigned short *port);
extern unsigned inl (unsigned port);
+#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v))
+#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
+#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
+
+#define __raw_readb(a) (*(volatile unsigned char *)(a))
+#define __raw_readw(a) (*(volatile unsigned short *)(a))
+#define __raw_readl(a) (*(volatile unsigned int *)(a))
+
#define readb(addr)\
({unsigned char val;\
asm volatile( "ldbio %0, 0(%1)" :"=r"(val) : "r" (addr)); val;})
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 496fc72..d769d70 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -720,11 +720,10 @@ typedef struct ccsr_tsec {
} ccsr_tsec_t;
/*
- * PIC Registers(0x2_6000-0x4_0000-0x8_0000)
+ * PIC Registers(0x4_0000-0x8_0000)
*/
typedef struct ccsr_pic {
- char res0[106496]; /* 0x26000-0x40000 */
- char res1[64];
+ char res1[64]; /* 0x40000 */
uint ipidr0; /* 0x40040 - Interprocessor Interrupt Dispatch Register 0 */
char res2[12];
uint ipidr1; /* 0x40050 - Interprocessor Interrupt Dispatch Register 1 */
@@ -1619,25 +1618,25 @@ typedef struct ccsr_gur {
#define PORDEVSR_PCI (0x00800000) /* PCI Mode */
-typedef struct immap {
- ccsr_local_ecm_t im_local_ecm;
- ccsr_ddr_t im_ddr;
- ccsr_i2c_t im_i2c;
- ccsr_duart_t im_duart;
- ccsr_lbc_t im_lbc;
- ccsr_pcix_t im_pcix;
- ccsr_pcix_t im_pcix2;
- char reserved[90112];
- ccsr_l2cache_t im_l2cache;
- ccsr_dma_t im_dma;
- ccsr_tsec_t im_tsec1;
- ccsr_tsec_t im_tsec2;
- ccsr_pic_t im_pic;
- ccsr_cpm_t im_cpm;
- ccsr_rio_t im_rio;
- ccsr_gur_t im_gur;
-} immap_t;
-
-extern immap_t *immr;
+#define CFG_MPC85xx_GUTS_OFFSET (0xE0000)
+#define CFG_MPC85xx_GUTS_ADDR (CFG_IMMR + CFG_MPC85xx_GUTS_OFFSET)
+#define CFG_MPC85xx_ECM_OFFSET (0x0000)
+#define CFG_MPC85xx_ECM_ADDR (CFG_IMMR + CFG_MPC85xx_ECM_OFFSET)
+#define CFG_MPC85xx_DDR_OFFSET (0x2000)
+#define CFG_MPC85xx_DDR_ADDR (CFG_IMMR + CFG_MPC85xx_DDR_OFFSET)
+#define CFG_MPC85xx_LBC_OFFSET (0x5000)
+#define CFG_MPC85xx_LBC_ADDR (CFG_IMMR + CFG_MPC85xx_LBC_OFFSET)
+#define CFG_MPC85xx_PCIX_OFFSET (0x8000)
+#define CFG_MPC85xx_PCIX_ADDR (CFG_IMMR + CFG_MPC85xx_PCIX_OFFSET)
+#define CFG_MPC85xx_PCIX2_OFFSET (0x9000)
+#define CFG_MPC85xx_PCIX2_ADDR (CFG_IMMR + CFG_MPC85xx_PCIX2_OFFSET)
+#define CFG_MPC85xx_L2_OFFSET (0x20000)
+#define CFG_MPC85xx_L2_ADDR (CFG_IMMR + CFG_MPC85xx_L2_OFFSET)
+#define CFG_MPC85xx_DMA_OFFSET (0x21000)
+#define CFG_MPC85xx_DMA_ADDR (CFG_IMMR + CFG_MPC85xx_DMA_OFFSET)
+#define CFG_MPC85xx_PIC_OFFSET (0x40000)
+#define CFG_MPC85xx_PIC_ADDR (CFG_IMMR + CFG_MPC85xx_PIC_OFFSET)
+#define CFG_MPC85xx_CPM_OFFSET (0x80000)
+#define CFG_MPC85xx_CPM_ADDR (CFG_IMMR + CFG_MPC85xx_CPM_OFFSET)
#endif /*__IMMAP_85xx__*/
diff --git a/include/asm-ppc/immap_fsl_pci.h b/include/asm-ppc/immap_fsl_pci.h
index bd732b6..6715064 100644
--- a/include/asm-ppc/immap_fsl_pci.h
+++ b/include/asm-ppc/immap_fsl_pci.h
@@ -144,7 +144,9 @@ typedef struct ccsr_pci {
u32 perr_cap1; /* 0xe2c - PCIE Error Capture Register 1 */
u32 perr_cap2; /* 0xe30 - PCIE Error Capture Register 2 */
u32 perr_cap3; /* 0xe34 - PCIE Error Capture Register 3 */
- char res23[456]; /* (- #x1000 #xe38) 456 */
+ char res23[200];
+ u32 pdb_stat; /* 0xf00 - PCIE Debug Status */
+ char res24[252];
} ccsr_fsl_pci_t;
#endif /*__IMMAP_fsl_pci__*/
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index 11dfa1c..91c9c1e 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h
@@ -121,13 +121,43 @@ static inline void isync(void)
#define iobarrier_w() eieio()
/*
+ * Non ordered and non-swapping "raw" accessors
+ */
+#define __iomem
+#define PCI_FIX_ADDR(addr) (addr)
+
+static inline unsigned char __raw_readb(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned char *)PCI_FIX_ADDR(addr);
+}
+static inline unsigned short __raw_readw(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned short *)PCI_FIX_ADDR(addr);
+}
+static inline unsigned int __raw_readl(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned int *)PCI_FIX_ADDR(addr);
+}
+static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
+{
+ *(volatile unsigned char *)PCI_FIX_ADDR(addr) = v;
+}
+static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
+{
+ *(volatile unsigned short *)PCI_FIX_ADDR(addr) = v;
+}
+static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
+{
+ *(volatile unsigned int *)PCI_FIX_ADDR(addr) = v;
+}
+
+/*
* 8, 16 and 32 bit, big and little endian I/O operations, with barrier.
*
* Read operations have additional twi & isync to make sure the read
* is actually performed (i.e. the data has come back) before we start
* executing any following instructions.
*/
-#define __iomem
extern inline int in_8(const volatile unsigned char __iomem *addr)
{
int ret;
@@ -208,4 +238,30 @@ extern inline void out_be32(volatile unsigned __iomem *addr, int val)
__asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
}
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE (0)
+#define MAP_WRCOMBINE (0)
+#define MAP_WRBACK (0)
+#define MAP_WRTHROUGH (0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+ return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
#endif
diff --git a/include/asm-ppc/iopin_85xx.h b/include/asm-ppc/iopin_85xx.h
index f854df6..daddb55 100644
--- a/include/asm-ppc/iopin_85xx.h
+++ b/include/asm-ppc/iopin_85xx.h
@@ -23,121 +23,121 @@ typedef struct {
extern __inline__ void iopin_set_high (iopin_t * iopin)
{
- volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata;
+ volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
datp[iopin->port * 8] |= (1 << (31 - iopin->pin));
}
extern __inline__ void iopin_set_low (iopin_t * iopin)
{
- volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata;
+ volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
datp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
}
extern __inline__ uint iopin_is_high (iopin_t * iopin)
{
- volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata;
+ volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
return (datp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
}
extern __inline__ uint iopin_is_low (iopin_t * iopin)
{
- volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata;
+ volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
return ((datp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
}
extern __inline__ void iopin_set_out (iopin_t * iopin)
{
- volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira;
+ volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
dirp[iopin->port * 8] |= (1 << (31 - iopin->pin));
}
extern __inline__ void iopin_set_in (iopin_t * iopin)
{
- volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira;
+ volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
dirp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
}
extern __inline__ uint iopin_is_out (iopin_t * iopin)
{
- volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira;
+ volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
return (dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
}
extern __inline__ uint iopin_is_in (iopin_t * iopin)
{
- volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira;
+ volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
return ((dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
}
extern __inline__ void iopin_set_odr (iopin_t * iopin)
{
- volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra;
+ volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
odrp[iopin->port * 8] |= (1 << (31 - iopin->pin));
}
extern __inline__ void iopin_set_act (iopin_t * iopin)
{
- volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra;
+ volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
odrp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
}
extern __inline__ uint iopin_is_odr (iopin_t * iopin)
{
- volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra;
+ volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
return (odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
}
extern __inline__ uint iopin_is_act (iopin_t * iopin)
{
- volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra;
+ volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
return ((odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
}
extern __inline__ void iopin_set_ded (iopin_t * iopin)
{
- volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara;
+ volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
parp[iopin->port * 8] |= (1 << (31 - iopin->pin));
}
extern __inline__ void iopin_set_gen (iopin_t * iopin)
{
- volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara;
+ volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
parp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
}
extern __inline__ uint iopin_is_ded (iopin_t * iopin)
{
- volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara;
+ volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
return (parp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
}
extern __inline__ uint iopin_is_gen (iopin_t * iopin)
{
- volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara;
+ volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
return ((parp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
}
extern __inline__ void iopin_set_opt2 (iopin_t * iopin)
{
- volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora;
+ volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
sorp[iopin->port * 8] |= (1 << (31 - iopin->pin));
}
extern __inline__ void iopin_set_opt1 (iopin_t * iopin)
{
- volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora;
+ volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
sorp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
}
extern __inline__ uint iopin_is_opt2 (iopin_t * iopin)
{
- volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora;
+ volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
return (sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
}
extern __inline__ uint iopin_is_opt1 (iopin_t * iopin)
{
- volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora;
+ volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
return ((sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
}
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index edcb3b9..b19abe7 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -413,7 +413,9 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
#define LAWAR_TRGT_IF_PCI1 0x00000000
#define LAWAR_TRGT_IF_PCIX 0x00000000
#define LAWAR_TRGT_IF_PCI2 0x00100000
-#define LAWAR_TRGT_IF_PEX 0x00200000
+#define LAWAR_TRGT_IF_PCIE1 0x00200000
+#define LAWAR_TRGT_IF_PCIE2 0x00100000
+#define LAWAR_TRGT_IF_PCIE3 0x00300000
#define LAWAR_TRGT_IF_LBC 0x00400000
#define LAWAR_TRGT_IF_CCSR 0x00800000
#define LAWAR_TRGT_IF_DDR_INTERLEAVED 0x00B00000
diff --git a/include/asm-sh/bitops.h b/include/asm-sh/bitops.h
new file mode 100644
index 0000000..410fba4
--- /dev/null
+++ b/include/asm-sh/bitops.h
@@ -0,0 +1,151 @@
+#ifndef __ASM_SH_BITOPS_H
+#define __ASM_SH_BITOPS_H
+
+#ifdef __KERNEL__
+#include <asm/irqflags.h>
+/* For __swab32 */
+#include <asm/byteorder.h>
+
+static inline void set_bit(int nr, volatile void * addr)
+{
+ int mask;
+ volatile unsigned int *a = addr;
+ unsigned long flags;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ local_irq_save(flags);
+ *a |= mask;
+ local_irq_restore(flags);
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+static inline void clear_bit(int nr, volatile void * addr)
+{
+ int mask;
+ volatile unsigned int *a = addr;
+ unsigned long flags;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ local_irq_save(flags);
+ *a &= ~mask;
+ local_irq_restore(flags);
+}
+
+static inline void change_bit(int nr, volatile void * addr)
+{
+ int mask;
+ volatile unsigned int *a = addr;
+ unsigned long flags;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ local_irq_save(flags);
+ *a ^= mask;
+ local_irq_restore(flags);
+}
+
+static inline int test_and_set_bit(int nr, volatile void * addr)
+{
+ int mask, retval;
+ volatile unsigned int *a = addr;
+ unsigned long flags;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ local_irq_save(flags);
+ retval = (mask & *a) != 0;
+ *a |= mask;
+ local_irq_restore(flags);
+
+ return retval;
+}
+
+static inline int test_and_clear_bit(int nr, volatile void * addr)
+{
+ int mask, retval;
+ volatile unsigned int *a = addr;
+ unsigned long flags;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ local_irq_save(flags);
+ retval = (mask & *a) != 0;
+ *a &= ~mask;
+ local_irq_restore(flags);
+
+ return retval;
+}
+
+static inline int test_and_change_bit(int nr, volatile void * addr)
+{
+ int mask, retval;
+ volatile unsigned int *a = addr;
+ unsigned long flags;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ local_irq_save(flags);
+ retval = (mask & *a) != 0;
+ *a ^= mask;
+ local_irq_restore(flags);
+
+ return retval;
+}
+
+static inline unsigned long ffz(unsigned long word)
+{
+ unsigned long result;
+
+ __asm__("1:\n\t"
+ "shlr %1\n\t"
+ "bt/s 1b\n\t"
+ " add #1, %0"
+ : "=r" (result), "=r" (word)
+ : "0" (~0L), "1" (word)
+ : "t");
+ return result;
+}
+
+/**
+ * ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline int ffs (int x)
+{
+ int r = 1;
+
+ if (!x)
+ return 0;
+ if (!(x & 0xffff)) {
+ x >>= 16;
+ r += 16;
+ }
+ if (!(x & 0xff)) {
+ x >>= 8;
+ r += 8;
+ }
+ if (!(x & 0xf)) {
+ x >>= 4;
+ r += 4;
+ }
+ if (!(x & 3)) {
+ x >>= 2;
+ r += 2;
+ }
+ if (!(x & 1)) {
+ x >>= 1;
+ r += 1;
+ }
+ return r;
+}
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_BITOPS_H */
diff --git a/include/asm-sh/byteorder.h b/include/asm-sh/byteorder.h
new file mode 100644
index 0000000..25626a0
--- /dev/null
+++ b/include/asm-sh/byteorder.h
@@ -0,0 +1,30 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_SH_BYTEORDER_H_
+#define __ASM_SH_BYTEORDER_H_
+
+#include <config.h>
+#include <asm/types.h>
+
+#ifdef __LITTLE_ENDIAN__
+#include <linux/byteorder/little_endian.h>
+#else
+#include <linux/byteorder/big_endian.h>
+#endif
+
+#endif
diff --git a/include/asm-sh/cpu_sh4.h b/include/asm-sh/cpu_sh4.h
new file mode 100644
index 0000000..2658039
--- /dev/null
+++ b/include/asm-sh/cpu_sh4.h
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_CPU_SH4_H_
+#define _ASM_CPU_SH4_H_
+
+/* cache control */
+#define CCR_CACHE_STOP 0x00000808
+#define CCR_CACHE_ENABLE 0x00000101
+#define CCR_CACHE_ICI 0x00000800
+
+#define CACHE_OC_ADDRESS_ARRAY 0xf4000000
+#define CACHE_OC_WAY_SHIFT 14
+#define CACHE_OC_NUM_ENTRIES 512
+#define CACHE_OC_ENTRY_SHIFT 5
+
+#if defined (CONFIG_CPU_SH7750)
+#include <asm/cpu_sh7750.h>
+#elif defined (CONFIG_CPU_SH7722)
+#include <asm/cpu_sh7722.h>
+#else
+#error "Unknown SH4 variant"
+#endif
+
+#endif /* _ASM_CPU_SH4_H_ */
diff --git a/include/asm-sh/cpu_sh7722.h b/include/asm-sh/cpu_sh7722.h
new file mode 100644
index 0000000..13d4a77
--- /dev/null
+++ b/include/asm-sh/cpu_sh7722.h
@@ -0,0 +1,1337 @@
+/*
+ * (C) Copyright 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * SH7722 Internal I/O register
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_CPU_SH7722_H_
+#define _ASM_CPU_SH7722_H_
+
+#define CACHE_OC_NUM_WAYS 4
+#define CCR_CACHE_INIT 0x0000090d
+
+/* EXP */
+#define TRA 0xFF000020
+#define EXPEVT 0xFF000024
+#define INTEVT 0xFF000028
+
+/* MMU */
+#define PTEH 0xFF000000
+#define PTEL 0xFF000004
+#define TTB 0xFF000008
+#define TEA 0xFF00000C
+#define MMUCR 0xFF000010
+#define PASCR 0xFF000070
+#define IRMCR 0xFF000078
+
+/* CACHE */
+#define CCR 0xFF00001C
+#define RAMCR 0xFF000074
+
+/* XY MEMORY */
+#define XSA 0xFF000050
+#define YSA 0xFF000054
+#define XDA 0xFF000058
+#define YDA 0xFF00005C
+#define XPR 0xFF000060
+#define YPR 0xFF000064
+#define XEA 0xFF000068
+#define YEA 0xFF00006C
+
+/* INTC */
+#define ICR0 0xA4140000
+#define ICR1 0xA414001C
+#define INTPRI0 0xA4140010
+#define INTREQ0 0xA4140024
+#define INTMSK0 0xA4140044
+#define INTMSKCLR0 0xA4140064
+#define NMIFCR 0xA41400C0
+#define USERIMASK 0xA4700000
+#define IPRA 0xA4080000
+#define IPRB 0xA4080004
+#define IPRC 0xA4080008
+#define IPRD 0xA408000C
+#define IPRE 0xA4080010
+#define IPRF 0xA4080014
+#define IPRG 0xA4080018
+#define IPRH 0xA408001C
+#define IPRI 0xA4080020
+#define IPRJ 0xA4080024
+#define IPRK 0xA4080028
+#define IPRL 0xA408002C
+#define IMR0 0xA4080080
+#define IMR1 0xA4080084
+#define IMR2 0xA4080088
+#define IMR3 0xA408008C
+#define IMR4 0xA4080090
+#define IMR5 0xA4080094
+#define IMR6 0xA4080098
+#define IMR7 0xA408009C
+#define IMR8 0xA40800A0
+#define IMR9 0xA40800A4
+#define IMR10 0xA40800A8
+#define IMR11 0xA40800AC
+#define IMCR0 0xA40800C0
+#define IMCR1 0xA40800C4
+#define IMCR2 0xA40800C8
+#define IMCR3 0xA40800CC
+#define IMCR4 0xA40800D0
+#define IMCR5 0xA40800D4
+#define IMCR6 0xA40800D8
+#define IMCR7 0xA40800DC
+#define IMCR8 0xA40800E0
+#define IMCR9 0xA40800E4
+#define IMCR10 0xA40800E8
+#define IMCR11 0xA40800EC
+#define MFI_IPRA 0xA40B0000
+#define MFI_IPRB 0xA40B0004
+#define MFI_IPRC 0xA40B0008
+#define MFI_IPRD 0xA40B000C
+#define MFI_IPRE 0xA40B0010
+#define MFI_IPRF 0xA40B0014
+#define MFI_IPRG 0xA40B0018
+#define MFI_IPRH 0xA40B001C
+#define MFI_IPRI 0xA40B0020
+#define MFI_IPRJ 0xA40B0024
+#define MFI_IPRK 0xA40B0028
+#define MFI_IPRL 0xA40B002C
+#define MFI_IMR0 0xA40B0080
+#define MFI_IMR1 0xA40B0084
+#define MFI_IMR2 0xA40B0088
+#define MFI_IMR3 0xA40B008C
+#define MFI_IMR4 0xA40B0090
+#define MFI_IMR5 0xA40B0094
+#define MFI_IMR6 0xA40B0098
+#define MFI_IMR7 0xA40B009C
+#define MFI_IMR8 0xA40B00A0
+#define MFI_IMR9 0xA40B00A4
+#define MFI_IMR10 0xA40B00A8
+#define MFI_IMR11 0xA40B00AC
+#define MFI_IMCR0 0xA40B00C0
+#define MFI_IMCR1 0xA40B00C4
+#define MFI_IMCR2 0xA40B00C8
+#define MFI_IMCR3 0xA40B00CC
+#define MFI_IMCR4 0xA40B00D0
+#define MFI_IMCR5 0xA40B00D4
+#define MFI_IMCR6 0xA40B00D8
+#define MFI_IMCR7 0xA40B00DC
+#define MFI_IMCR8 0xA40B00E0
+#define MFI_IMCR9 0xA40B00E4
+#define MFI_IMCR10 0xA40B00E8
+#define MFI_IMCR11 0xA40B00EC
+
+/* BSC */
+#define CMNCR 0xFEC10000
+#define CS0BCR 0xFEC10004
+#define CS2BCR 0xFEC10008
+#define CS4BCR 0xFEC10010
+#define CS5ABCR 0xFEC10014
+#define CS5BBCR 0xFEC10018
+#define CS6ABCR 0xFEC1001C
+#define CS6BBCR 0xFEC10020
+#define CS0WCR 0xFEC10024
+#define CS2WCR 0xFEC10028
+#define CS4WCR 0xFEC10030
+#define CS5AWCR 0xFEC10034
+#define CS5BWCR 0xFEC10038
+#define CS6AWCR 0xFEC1003C
+#define CS6BWCR 0xFEC10040
+#define RBWTCNT 0xFEC10054
+
+/* SBSC */
+#define SBSC_SDCR 0xFE400008
+#define SBSC_SDWCR 0xFE40000C
+#define SBSC_SDPCR 0xFE400010
+#define SBSC_RTCSR 0xFE400014
+#define SBSC_RTCNT 0xFE400018
+#define SBSC_RTCOR 0xFE40001C
+#define SBSC_RFCR 0xFE400020
+
+/* DMAC */
+#define SAR_0 0xFE008020
+#define DAR_0 0xFE008024
+#define TCR_0 0xFE008028
+#define CHCR_0 0xFE00802C
+#define SAR_1 0xFE008030
+#define DAR_1 0xFE008034
+#define TCR_1 0xFE008038
+#define CHCR_1 0xFE00803C
+#define SAR_2 0xFE008040
+#define DAR_2 0xFE008044
+#define TCR_2 0xFE008048
+#define CHCR_2 0xFE00804C
+#define SAR_3 0xFE008050
+#define DAR_3 0xFE008054
+#define TCR_3 0xFE008058
+#define CHCR_3 0xFE00805C
+#define SAR_4 0xFE008070
+#define DAR_4 0xFE008074
+#define TCR_4 0xFE008078
+#define CHCR_4 0xFE00807C
+#define SAR_5 0xFE008080
+#define DAR_5 0xFE008084
+#define TCR_5 0xFE008088
+#define CHCR_5 0xFE00808C
+#define SARB_0 0xFE008120
+#define DARB_0 0xFE008124
+#define TCRB_0 0xFE008128
+#define SARB_1 0xFE008130
+#define DARB_1 0xFE008134
+#define TCRB_1 0xFE008138
+#define SARB_2 0xFE008140
+#define DARB_2 0xFE008144
+#define TCRB_2 0xFE008148
+#define SARB_3 0xFE008150
+#define DARB_3 0xFE008154
+#define TCRB_3 0xFE008158
+#define DMAOR 0xFE008060
+#define DMARS_0 0xFE009000
+#define DMARS_1 0xFE009004
+#define DMARS_2 0xFE009008
+
+/* CPG */
+#define FRQCR 0xA4150000
+#define VCLKCR 0xA4150004
+#define SCLKACR 0xA4150008
+#define SCLKBCR 0xA415000C
+#define PLLCR 0xA4150024
+#define DLLFRQ 0xA4150050
+
+/* LOW POWER MODE */
+#define STBCR 0xA4150020
+#define MSTPCR0 0xA4150030
+#define MSTPCR1 0xA4150034
+#define MSTPCR2 0xA4150038
+#define BAR 0xA4150040
+
+/* RWDT */
+#define RWTCNT 0xA4520000
+#define RWTCSR 0xA4520004
+#define WTCNT RWTCNT
+
+
+/* TMU */
+#define TSTR 0xFFD80004
+#define TCOR0 0xFFD80008
+#define TCNT0 0xFFD8000C
+#define TCR0 0xFFD80010
+#define TCOR1 0xFFD80014
+#define TCNT1 0xFFD80018
+#define TCR1 0xFFD8001C
+#define TCOR2 0xFFD80020
+#define TCNT2 0xFFD80024
+#define TCR2 0xFFD80028
+
+/* TPU */
+#define TPU_TSTR 0xA4C90000
+#define TPU_TCR0 0xA4C90010
+#define TPU_TMDR0 0xA4C90014
+#define TPU_TIOR0 0xA4C90018
+#define TPU_TIER0 0xA4C9001C
+#define TPU_TSR0 0xA4C90020
+#define TPU_TCNT0 0xA4C90024
+#define TPU_TGR0A 0xA4C90028
+#define TPU_TGR0B 0xA4C9002C
+#define TPU_TGR0C 0xA4C90030
+#define TPU_TGR0D 0xA4C90034
+#define TPU_TCR1 0xA4C90050
+#define TPU_TMDR1 0xA4C90054
+#define TPU_TIER1 0xA4C9005C
+#define TPU_TSR1 0xA4C90060
+#define TPU_TCNT1 0xA4C90064
+#define TPU_TGR1A 0xA4C90068
+#define TPU_TGR1B 0xA4C9006C
+#define TPU_TGR1C 0xA4C90070
+#define TPU_TGR1D 0xA4C90074
+#define TPU_TCR2 0xA4C90090
+#define TPU_TMDR2 0xA4C90094
+#define TPU_TIER2 0xA4C9009C
+#define TPU_TSR2 0xA4C900A0
+#define TPU_TCNT2 0xA4C900A4
+#define TPU_TGR2A 0xA4C900A8
+#define TPU_TGR2B 0xA4C900AC
+#define TPU_TGR2C 0xA4C900B0
+#define TPU_TGR2D 0xA4C900B4
+#define TPU_TCR3 0xA4C900D0
+#define TPU_TMDR3 0xA4C900D4
+#define TPU_TIER3 0xA4C900DC
+#define TPU_TSR3 0xA4C900E0
+#define TPU_TCNT3 0xA4C900E4
+#define TPU_TGR3A 0xA4C900E8
+#define TPU_TGR3B 0xA4C900EC
+#define TPU_TGR3C 0xA4C900F0
+#define TPU_TGR3D 0xA4C900F4
+
+/* CMT */
+#define CMSTR 0xA44A0000
+#define CMCSR 0xA44A0060
+#define CMCNT 0xA44A0064
+#define CMCOR 0xA44A0068
+
+/* SIO */
+#define SIOMDR 0xA4500000
+#define SIOCTR 0xA4500004
+#define SIOSTBCR0 0xA4500008
+#define SIOSTBCR1 0xA450000C
+#define SIOTDR 0xA4500014
+#define SIORDR 0xA4500018
+#define SIOSTR 0xA450001C
+#define SIOIER 0xA4500020
+#define SIOSCR 0xA4500024
+
+/* SIOF */
+#define SIMDR0 0xA4410000
+#define SISCR0 0xA4410002
+#define SITDAR0 0xA4410004
+#define SIRDAR0 0xA4410006
+#define SICDAR0 0xA4410008
+#define SICTR0 0xA441000C
+#define SIFCTR0 0xA4410010
+#define SISTR0 0xA4410014
+#define SIIER0 0xA4410016
+#define SITDR0 0xA4410020
+#define SIRDR0 0xA4410024
+#define SITCR0 0xA4410028
+#define SIRCR0 0xA441002C
+#define SPICR0 0xA4410030
+#define SIMDR1 0xA4420000
+#define SISCR1 0xA4420002
+#define SITDAR1 0xA4420004
+#define SIRDAR1 0xA4420006
+#define SICDAR1 0xA4420008
+#define SICTR1 0xA442000C
+#define SIFCTR1 0xA4420010
+#define SISTR1 0xA4420014
+#define SIIER1 0xA4420016
+#define SITDR1 0xA4420020
+#define SIRDR1 0xA4420024
+#define SITCR1 0xA4420028
+#define SIRCR1 0xA442002C
+#define SPICR1 0xA4420030
+
+/* SCIF */
+/*
+#define SCSMR 0xFFE00000
+#define SCBRR 0xFFE00004
+#define SCSCR 0xFFE00008
+#define SCFTDR 0xFFE0000C
+#define SCFSR 0xFFE00010
+#define SCFRDR 0xFFE00014
+#define SCFCR 0xFFE00018
+#define SCFDR 0xFFE0001C
+#define SCLSR 0xFFE00024
+#define SCSMR1 0xFFE10000
+#define SCBRR1 0xFFE10004
+#define SCSCR1 0xFFE10008
+#define SCFTDR1 0xFFE1000C
+#define SCFSR1 0xFFE10010
+#define SCFRDR1 0xFFE10014
+#define SCFCR1 0xFFE10018
+#define SCFDR1 0xFFE1001C
+#define SCLSR1 0xFFE10024
+#define SCSMR2 0xFFE20000
+#define SCBRR2 0xFFE20004
+#define SCSCR2 0xFFE20008
+#define SCFTDR2 0xFFE2000C
+#define SCFSR2 0xFFE20010
+#define SCFRDR2 0xFFE20014
+#define SCFCR2 0xFFE20018
+#define SCFDR2 0xFFE2001C
+#define SCLSR2 0xFFE20024
+#define SCSMR3 0xFFE30000
+#define SCBRR3 0xFFE30004
+#define SCSCR3 0xFFE30008
+#define SCFTDR3 0xFFE3000C
+#define SCFSR3 0xFFE30010
+#define SCFRDR3 0xFFE30014
+#define SCFCR3 0xFFE30018
+#define SCFDR3 0xFFE3001C
+#define SCLSR3 0xFFE30024
+*/
+#define SCIF0_BASE 0xFFE00000
+
+/* SIM */
+#define SIM_SCSMR 0xA4490000
+#define SIM_SCBRR 0xA4490002
+#define SIM_SCSCR 0xA4490004
+#define SIM_SCTDR 0xA4490006
+#define SIM_SCSSR 0xA4490008
+#define SIM_SCRDR 0xA449000A
+#define SIM_SCSCMR 0xA449000C
+#define SIM_SCSC2R 0xA449000E
+#define SIM_SCWAIT 0xA4490010
+#define SIM_SCGRD 0xA4490012
+#define SIM_SCSMPL 0xA4490014
+#define SIM_SCDMAEN 0xA4490016
+
+/* IrDA */
+#define IRIF_INIT1 0xA45D0012
+#define IRIF_INIT2 0xA45D0014
+#define IRIF_RINTCLR 0xA45D0016
+#define IRIF_TINTCLR 0xA45D0018
+#define IRIF_SIR0 0xA45D0020
+#define IRIF_SIR1 0xA45D0022
+#define IRIF_SIR2 0xA45D0024
+#define IRIF_SIR3 0xA45D0026
+#define IRIF_SIR_FRM 0xA45D0028
+#define IRIF_SIR_EOF 0xA45D002A
+#define IRIF_SIR_FLG 0xA45D002C
+#define IRIF_SIR_STS2 0xA45D002E
+#define IRIF_UART0 0xA45D0030
+#define IRIF_UART1 0xA45D0032
+#define IRIF_UART2 0xA45D0034
+#define IRIF_UART3 0xA45D0036
+#define IRIF_UART4 0xA45D0038
+#define IRIF_UART5 0xA45D003A
+#define IRIF_UART6 0xA45D003C
+#define IRIF_UART7 0xA45D003E
+#define IRIF_CRC0 0xA45D0040
+#define IRIF_CRC1 0xA45D0042
+#define IRIF_CRC2 0xA45D0044
+#define IRIF_CRC3 0xA45D0046
+#define IRIF_CRC4 0xA45D0048
+
+/* IIC */
+#define ICDR0 0xA4470000
+#define ICCR0 0xA4470004
+#define ICSR0 0xA4470008
+#define ICIC0 0xA447000C
+#define ICCL0 0xA4470010
+#define ICCH0 0xA4470014
+#define ICDR1 0xA4750000
+#define ICCR1 0xA4750004
+#define ICSR1 0xA4750008
+#define ICIC1 0xA475000C
+#define ICCL1 0xA4750010
+#define ICCH1 0xA4750014
+
+/* FLCTL */
+#define FLCMNCR 0xA4530000
+#define FLCMDCR 0xA4530004
+#define FLCMCDR 0xA4530008
+#define FLADR 0xA453000C
+#define FLDATAR 0xA4530010
+#define FLDTCNTR 0xA4530014
+#define FLINTDMACR 0xA4530018
+#define FLBSYTMR 0xA453001C
+#define FLBSYCNT 0xA4530020
+#define FLDTFIFO 0xA4530024
+#define FLECFIFO 0xA4530028
+#define FLTRCR 0xA453002C
+#define FLADR2 0xA453003C
+
+/* MFI */
+#define MFIIDX 0xA4C10000
+#define MFIGSR 0xA4C10004
+#define MFISCR 0xA4C10008
+#define MFIMCR 0xA4C1000C
+#define MFIIICR 0xA4C10010
+#define MFIEICR 0xA4C10014
+#define MFIADR 0xA4C10018
+#define MFIDATA 0xA4C1001C
+#define MFIRCR 0xA4C10020
+#define MFIINTEVT 0xA4C1002C
+#define MFIIMASK 0xA4C10030
+#define MFIBCR 0xA4C10040
+#define MFIADRW 0xA4C10044
+#define MFIADRR 0xA4C10048
+#define MFIDATAW 0xA4C1004C
+#define MFIDATAR 0xA4C10050
+#define MFIMCRW 0xA4C10054
+#define MFIMCRR 0xA4C10058
+#define MFIDNRW 0xA4C1005C
+#define MFIDNRR 0xA4C10060
+#define MFISIZEW 0xA4C10064
+#define MFISIZER 0xA4C10068
+#define MFIDEVCR 0xA4C10038
+#define MFISM4 0xA4C10080
+
+/* VPU */
+#define VP4_CTRL 0xFE900000
+#define VP4_VOL_CTRL 0xFE900004
+#define VP4_IMAGE_SIZE 0xFE900008
+#define VP4_MB_NUM 0xFE90000C
+#define VP4_DWY_ADDR 0xFE900010
+#define VP4_DWC_ADDR 0xFE900014
+#define VP4_D2WY_ADDR 0xFE900018
+#define VP4_D2WC_ADDR 0xFE90001C
+#define VP4_DP1_ADDR 0xFE900020
+#define VP4_DP2_ADDR 0xFE900024
+#define VP4_STRS_ADDR 0xFE900028
+#define VP4_STRE_ADDR 0xFE90002C
+#define VP4_VOP_CTRL 0xFE900030
+#define VP4_VOP_TIME 0xFE900034
+#define VP4_263_CTRL 0xFE900038
+#define VP4_264_CTRL 0xFE90003C
+#define VP4_VLC_CTRL 0xFE900040
+#define VP4_ENDIAN 0xFE900044
+#define VP4_CMD 0xFE900048
+#define VP4_ME_TH1 0xFE90004C
+#define VP4_ME_TH2 0xFE900050
+#define VP4_ME_COSTMB 0xFE900054
+#define VP4_ME_SKIP 0xFE900058
+#define VP4_ME_CTRL 0xFE90005C
+#define VP4_MBRF_CTRL 0xFE900060
+#define VP4_MC_CTRL 0xFE900064
+#define VP4_PRED_CTRL 0xFE900068
+#define VP4_SLC_SIZE 0xFE90006C
+#define VP4_VOP_MINBIT 0xFE900070
+#define VP4_MB_MAXBIT 0xFE900074
+#define VP4_MB_TBIT 0xFE900078
+#define VP4_RCQNT 0xFE90007C
+#define VP4_RCRP 0xFE900080
+#define VP4_RCDJ 0xFE900084
+#define VP4_RCWQ 0xFE900088
+#define VP4_FWD_TIME 0xFE900094
+#define VP4_BWD_TIME 0xFE900098
+#define VP4_PST_TIME 0xFE90009C
+#define VP4_ILTFRAME 0xFE9000A0
+#define VP4_EC_REF 0xFE9000A4
+#define VP4_STATUS 0xFE900100
+#define VP4_IRQ_ENB 0xFE900104
+#define VP4_IRQ_STA 0xFE900108
+#define VP4_VOP_BIT 0xFE90010C
+#define VP4_PRV_BIT 0xFE900110
+#define VP4_SLC_MB 0xFE900114
+#define VP4_QSUM 0xFE900118
+#define VP4_DEC_ERR 0xFE90011C
+#define VP4_ERR_AREA 0xFE900120
+#define VP4_NEXT_CODE 0xFE900124
+#define VP4_MB_ATTR 0xFE900128
+#define VP4_DBMON 0xFE90012C
+#define VP4_DEBUG 0xFE900130
+#define VP4_ERR_DET 0xFE900134
+#define VP4_CLK_STOP 0xFE900138
+#define VP4_MB_SADA 0xFE90013C
+#define VP4_MB_SADR 0xFE900140
+#define VP4_MAT_RAM 0xFE901000
+#define VP4_NC_RAM 0xFE902000
+#define WT 0xFE9020CC
+#define VP4_CPY_ADDR 0xFE902264
+#define VP4_CPC_ADDR 0xFE902268
+#define VP4_R0Y_ADDR 0xFE90226C
+#define VP4_R0C_ADDR 0xFE902270
+#define VP4_R1Y_ADDR 0xFE902274
+#define VP4_R1C_ADDR 0xFE902278
+#define VP4_R2Y_ADDR 0xFE90227C
+#define VP4_R2C_ADDR 0xFE902280
+#define VP4_R3Y_ADDR 0xFE902284
+#define VP4_R3C_ADDR 0xFE902288
+#define VP4_R4Y_ADDR 0xFE90228C
+#define VP4_R4C_ADDR 0xFE902290
+#define VP4_R5Y_ADDR 0xFE902294
+#define VP4_R5C_ADDR 0xFE902298
+#define VP4_R6Y_ADDR 0xFE90229C
+#define VP4_R6C_ADDR 0xFE9022A0
+#define VP4_R7Y_ADDR 0xFE9022A4
+#define VP4_R7C_ADDR 0xFE9022A8
+#define VP4_R8Y_ADDR 0xFE9022AC
+#define VP4_R8C_ADDR 0xFE9022B0
+#define VP4_R9Y_ADDR 0xFE9022B4
+#define VP4_R9C_ADDR 0xFE9022B8
+#define VP4_RAY_ADDR 0xFE9022BC
+#define VP4_RAC_ADDR 0xFE9022C0
+#define VP4_RBY_ADDR 0xFE9022C4
+#define VP4_RBC_ADDR 0xFE9022C8
+#define VP4_RCY_ADDR 0xFE9022CC
+#define VP4_RCC_ADDR 0xFE9022D0
+#define VP4_RDY_ADDR 0xFE9022D4
+#define VP4_RDC_ADDR 0xFE9022D8
+#define VP4_REY_ADDR 0xFE9022DC
+#define VP4_REC_ADDR 0xFE9022E0
+#define VP4_RFY_ADDR 0xFE9022E4
+#define VP4_RFC_ADDR 0xFE9022E8
+
+/* VIO(CEU) */
+#define CAPSR 0xFE910000
+#define CAPCR 0xFE910004
+#define CAMCR 0xFE910008
+#define CMCYR 0xFE91000C
+#define CAMOR 0xFE910010
+#define CAPWR 0xFE910014
+#define CAIFR 0xFE910018
+#define CSTCR 0xFE910020
+#define CSECR 0xFE910024
+#define CRCNTR 0xFE910028
+#define CRCMPR 0xFE91002C
+#define CFLCR 0xFE910030
+#define CFSZR 0xFE910034
+#define CDWDR 0xFE910038
+#define CDAYR 0xFE91003C
+#define CDACR 0xFE910040
+#define CDBYR 0xFE910044
+#define CDBCR 0xFE910048
+#define CBDSR 0xFE91004C
+#define CLFCR 0xFE910060
+#define CDOCR 0xFE910064
+#define CDDCR 0xFE910068
+#define CDDAR 0xFE91006C
+#define CEIER 0xFE910070
+#define CETCR 0xFE910074
+#define CSTSR 0xFE91007C
+#define CSRTR 0xFE910080
+#define CDAYR2 0xFE910090
+#define CDACR2 0xFE910094
+#define CDBYR2 0xFE910098
+#define CDBCR2 0xFE91009C
+
+/* VIO(VEU) */
+#define VESTR 0xFE920000
+#define VESWR 0xFE920010
+#define VESSR 0xFE920014
+#define VSAYR 0xFE920018
+#define VSACR 0xFE92001C
+#define VBSSR 0xFE920020
+#define VEDWR 0xFE920030
+#define VDAYR 0xFE920034
+#define VDACR 0xFE920038
+#define VTRCR 0xFE920050
+#define VRFCR 0xFE920054
+#define VRFSR 0xFE920058
+#define VENHR 0xFE92005C
+#define VFMCR 0xFE920070
+#define VVTCR 0xFE920074
+#define VHTCR 0xFE920078
+#define VAPCR 0xFE920080
+#define VECCR 0xFE920084
+#define VAFXR 0xFE920090
+#define VSWPR 0xFE920094
+#define VEIER 0xFE9200A0
+#define VEVTR 0xFE9200A4
+#define VSTAR 0xFE9200B0
+#define VBSRR 0xFE9200B4
+
+/* VIO(BEU) */
+#define BESTR 0xFE930000
+#define BSMWR1 0xFE930010
+#define BSSZR1 0xFE930014
+#define BSAYR1 0xFE930018
+#define BSACR1 0xFE93001C
+#define BSAAR1 0xFE930020
+#define BSIFR1 0xFE930024
+#define BSMWR2 0xFE930028
+#define BSSZR2 0xFE93002C
+#define BSAYR2 0xFE930030
+#define BSACR2 0xFE930034
+#define BSAAR2 0xFE930038
+#define BSIFR2 0xFE93003C
+#define BSMWR3 0xFE930040
+#define BSSZR3 0xFE930044
+#define BSAYR3 0xFE930048
+#define BSACR3 0xFE93004C
+#define BSAAR3 0xFE930050
+#define BSIFR3 0xFE930054
+#define BTPSR 0xFE930058
+#define BMSMWR1 0xFE930070
+#define BMSSZR1 0xFE930074
+#define BMSAYR1 0xFE930078
+#define BMSACR1 0xFE93007C
+#define BMSMWR2 0xFE930080
+#define BMSSZR2 0xFE930084
+#define BMSAYR2 0xFE930088
+#define BMSACR2 0xFE93008C
+#define BMSMWR3 0xFE930090
+#define BMSSZR3 0xFE930094
+#define BMSAYR3 0xFE930098
+#define BMSACR3 0xFE93009C
+#define BMSMWR4 0xFE9300A0
+#define BMSSZR4 0xFE9300A4
+#define BMSAYR4 0xFE9300A8
+#define BMSACR4 0xFE9300AC
+#define BMSIFR 0xFE9300F0
+#define BBLCR0 0xFE930100
+#define BBLCR1 0xFE930104
+#define BPROCR 0xFE930108
+#define BMWCR0 0xFE93010C
+#define BLOCR1 0xFE930114
+#define BLOCR2 0xFE930118
+#define BLOCR3 0xFE93011C
+#define BMLOCR1 0xFE930120
+#define BMLOCR2 0xFE930124
+#define BMLOCR3 0xFE930128
+#define BMLOCR4 0xFE93012C
+#define BMPCCR1 0xFE930130
+#define BMPCCR2 0xFE930134
+#define BPKFR 0xFE930140
+#define BPCCR0 0xFE930144
+#define BPCCR11 0xFE930148
+#define BPCCR12 0xFE93014C
+#define BPCCR21 0xFE930150
+#define BPCCR22 0xFE930154
+#define BPCCR31 0xFE930158
+#define BPCCR32 0xFE93015C
+#define BDMWR 0xFE930160
+#define BDAYR 0xFE930164
+#define BDACR 0xFE930168
+#define BAFXR 0xFE930180
+#define BSWPR 0xFE930184
+#define BEIER 0xFE930188
+#define BEVTR 0xFE93018C
+#define BRCNTR 0xFE930194
+#define BSTAR 0xFE930198
+#define BBRSTR 0xFE93019C
+#define BRCHR 0xFE9301A0
+#define CLUT 0xFE933000
+
+/* JPU */
+#define JCMOD 0xFEA00000
+#define JCCMD 0xFEA00004
+#define JCSTS 0xFEA00008
+#define JCQTN 0xFEA0000C
+#define JCHTN 0xFEA00010
+#define JCDRIU 0xFEA00014
+#define JCDRID 0xFEA00018
+#define JCVSZU 0xFEA0001C
+#define JCVSZD 0xFEA00020
+#define JCHSZU 0xFEA00024
+#define JCHSZD 0xFEA00028
+#define JCDTCU 0xFEA0002C
+#define JCDTCM 0xFEA00030
+#define JCDTCD 0xFEA00034
+#define JINTE 0xFEA00038
+#define JINTS 0xFEA0003C
+#define JCDERR 0xFEA00040
+#define JCRST 0xFEA00044
+#define JIFCNT 0xFEA00060
+#define JIFECNT 0xFEA00070
+#define JIFESYA1 0xFEA00074
+#define JIFESCA1 0xFEA00078
+#define JIFESYA2 0xFEA0007C
+#define JIFESCA2 0xFEA00080
+#define JIFESMW 0xFEA00084
+#define JIFESVSZ 0xFEA00088
+#define JIFESHSZ 0xFEA0008C
+#define JIFEDA1 0xFEA00090
+#define JIFEDA2 0xFEA00094
+#define JIFEDRSZ 0xFEA00098
+#define JIFDCNT 0xFEA000A0
+#define JIFDSA1 0xFEA000A4
+#define JIFDSA2 0xFEA000A8
+#define JIFDDRSZ 0xFEA000AC
+#define JIFDDMW 0xFEA000B0
+#define JIFDDVSZ 0xFEA000B4
+#define JIFDDHSZ 0xFEA000B8
+#define JIFDDYA1 0xFEA000BC
+#define JIFDDCA1 0xFEA000C0
+#define JIFDDYA2 0xFEA000C4
+#define JIFDDCA2 0xFEA000C8
+#define JCQTBL0 0xFEA10000
+#define JCQTBL1 0xFEA10040
+#define JCQTBL2 0xFEA10080
+#define JCQTBL3 0xFEA100C0
+#define JCHTBD0 0xFEA10100
+#define JCHTBA0 0xFEA10120
+#define JCHTBD1 0xFEA10200
+#define JCHTBA1 0xFEA10220
+
+/* LCDC */
+#define MLDDCKPAT1R 0xFE940400
+#define MLDDCKPAT2R 0xFE940404
+#define SLDDCKPAT1R 0xFE940408
+#define SLDDCKPAT2R 0xFE94040C
+#define LDDCKR 0xFE940410
+#define LDDCKSTPR 0xFE940414
+#define MLDMT1R 0xFE940418
+#define MLDMT2R 0xFE94041C
+#define MLDMT3R 0xFE940420
+#define MLDDFR 0xFE940424
+#define MLDSM1R 0xFE940428
+#define MLDSM2R 0xFE94042C
+#define MLDSA1R 0xFE940430
+#define MLDSA2R 0xFE940434
+#define MLDMLSR 0xFE940438
+#define MLDWBFR 0xFE94043C
+#define MLDWBCNTR 0xFE940440
+#define MLDWBAR 0xFE940444
+#define MLDHCNR 0xFE940448
+#define MLDHSYNR 0xFE94044C
+#define MLDVLNR 0xFE940450
+#define MLDVSYNR 0xFE940454
+#define MLDHPDR 0xFE940458
+#define MLDVPDR 0xFE94045C
+#define MLDPMR 0xFE940460
+#define LDPALCR 0xFE940464
+#define LDINTR 0xFE940468
+#define LDSR 0xFE94046C
+#define LDCNT1R 0xFE940470
+#define LDCNT2R 0xFE940474
+#define LDRCNTR 0xFE940478
+#define LDDDSR 0xFE94047C
+#define LDRCR 0xFE940484
+#define LDCMRKRGBR 0xFE9404C4
+#define LDCMRKCMYR 0xFE9404C8
+#define LDCMRK1R 0xFE9404CC
+#define LDCMRK2R 0xFE9404D0
+#define LDCMGKRGBR 0xFE9404D4
+#define LDCMGKCMYR 0xFE9404D8
+#define LDCMGK1R 0xFE9404DC
+#define LDCMGK2R 0xFE9404E0
+#define LDCMBKRGBR 0xFE9404E4
+#define LDCMBKCMYR 0xFE9404E8
+#define LDCMBK1R 0xFE9404EC
+#define LDCMBK2R 0xFE9404F0
+#define LDCMHKPR 0xFE9404F4
+#define LDCMHKQR 0xFE9404F8
+#define LDCMSELR 0xFE9404FC
+#define LDCMTVR 0xFE940500
+#define LDCMTVSELR 0xFE940504
+#define LDCMDTHR 0xFE940508
+#define LDCMCNTR 0xFE94050C
+#define SLDMT1R 0xFE940600
+#define SLDMT2R 0xFE940604
+#define SLDMT3R 0xFE940608
+#define SLDDFR 0xFE94060C
+#define SLDSM1R 0xFE940610
+#define SLDSM2R 0xFE940614
+#define SLDSA1R 0xFE940618
+#define SLDSA2R 0xFE94061C
+#define SLDMLSR 0xFE940620
+#define SLDHCNR 0xFE940624
+#define SLDHSYNR 0xFE940628
+#define SLDVLNR 0xFE94062C
+#define SLDVSYNR 0xFE940630
+#define SLDHPDR 0xFE940634
+#define SLDVPDR 0xFE940638
+#define SLDPMR 0xFE94063C
+#define LDDWD0R 0xFE940800
+#define LDDWD1R 0xFE940804
+#define LDDWD2R 0xFE940808
+#define LDDWD3R 0xFE94080C
+#define LDDWD4R 0xFE940810
+#define LDDWD5R 0xFE940814
+#define LDDWD6R 0xFE940818
+#define LDDWD7R 0xFE94081C
+#define LDDWD8R 0xFE940820
+#define LDDWD9R 0xFE940824
+#define LDDWDAR 0xFE940828
+#define LDDWDBR 0xFE94082C
+#define LDDWDCR 0xFE940830
+#define LDDWDDR 0xFE940834
+#define LDDWDER 0xFE940838
+#define LDDWDFR 0xFE94083C
+#define LDDRDR 0xFE940840
+#define LDDWAR 0xFE940900
+#define LDDRAR 0xFE940904
+#define LDPR00 0xFE940000
+
+/* VOU */
+#define VOUER 0xFE960000
+#define VOUCR 0xFE960004
+#define VOUSTR 0xFE960008
+#define VOUVCR 0xFE96000C
+#define VOUISR 0xFE960010
+#define VOUBCR 0xFE960014
+#define VOUDPR 0xFE960018
+#define VOUDSR 0xFE96001C
+#define VOUVPR 0xFE960020
+#define VOUIR 0xFE960024
+#define VOUSRR 0xFE960028
+#define VOUMSR 0xFE96002C
+#define VOUHIR 0xFE960030
+#define VOUDFR 0xFE960034
+#define VOUAD1R 0xFE960038
+#define VOUAD2R 0xFE96003C
+#define VOUAIR 0xFE960040
+#define VOUSWR 0xFE960044
+#define VOURCR 0xFE960048
+#define VOURPR 0xFE960050
+
+/* TSIF */
+#define TSCTLR 0xA4C80000
+#define TSPIDR 0xA4C80004
+#define TSCMDR 0xA4C80008
+#define TSSTR 0xA4C8000C
+#define TSTSDR 0xA4C80010
+#define TSBUFCLRR 0xA4C80014
+#define TSINTER 0xA4C80018
+#define TSPSCALER 0xA4C80020
+#define TSPSCALERR 0xA4C80024
+#define TSPCRADCMDR 0xA4C80028
+#define TSPCRADCR 0xA4C8002C
+#define TSTRPCRADCR 0xA4C80030
+#define TSDPCRADCR 0xA4C80034
+
+/* SIU */
+#define IFCTL 0xA454C000
+#define SRCTL 0xA454C004
+#define SFORM 0xA454C008
+#define CKCTL 0xA454C00C
+#define TRDAT 0xA454C010
+#define STFIFO 0xA454C014
+#define DPAK 0xA454C01C
+#define CKREV 0xA454C020
+#define EVNTC 0xA454C028
+#define SBCTL 0xA454C040
+#define SBPSET 0xA454C044
+#define SBBUS 0xA454C048
+#define SBWFLG 0xA454C058
+#define SBRFLG 0xA454C05C
+#define SBWDAT 0xA454C060
+#define SBRDAT 0xA454C064
+#define SBFSTS 0xA454C068
+#define SBDVCA 0xA454C06C
+#define SBDVCB 0xA454C070
+#define SBACTIV 0xA454C074
+#define DMAIA 0xA454C090
+#define DMAIB 0xA454C094
+#define DMAOA 0xA454C098
+#define DMAOB 0xA454C09C
+#define SPLRI 0xA454C0B8
+#define SPRRI 0xA454C0BC
+#define SPURI 0xA454C0C4
+#define SPTIS 0xA454C0C8
+#define SPSTS 0xA454C0CC
+#define SPCTL 0xA454C0D0
+#define SPIRI 0xA454C0D4
+#define SPQCF 0xA454C0D8
+#define SPQCS 0xA454C0DC
+#define SPQCT 0xA454C0E0
+#define DPEAK 0xA454C0F0
+#define DSLPD 0xA454C0F4
+#define DSLLV 0xA454C0F8
+#define BRGASEL 0xA454C100
+#define BRRA 0xA454C104
+#define BRGBSEL 0xA454C108
+#define BRRB 0xA454C10C
+
+/* USB */
+#define IFR0 0xA4480000
+#define ISR0 0xA4480010
+#define IER0 0xA4480020
+#define EPDR0I 0xA4480030
+#define EPDR0O 0xA4480034
+#define EPDR0S 0xA4480038
+#define EPDR1 0xA448003C
+#define EPDR2 0xA4480040
+#define EPDR3 0xA4480044
+#define EPDR4 0xA4480048
+#define EPDR5 0xA448004C
+#define EPDR6 0xA4480050
+#define EPDR7 0xA4480054
+#define EPDR8 0xA4480058
+#define EPDR9 0xA448005C
+#define EPSZ0O 0xA4480080
+#define EPSZ3 0xA4480084
+#define EPSZ6 0xA4480088
+#define EPSZ9 0xA448008C
+#define TRG 0xA44800A0
+#define DASTS 0xA44800A4
+#define FCLR 0xA44800AA
+#define DMA 0xA44800AC
+#define EPSTL 0xA44800B2
+#define CVR 0xA44800B4
+#define TSR 0xA44800B8
+#define CTLR 0xA44800BC
+#define EPIR 0xA44800C0
+#define XVERCR 0xA44800D0
+#define STLMR 0xA44800D4
+
+/* KEYSC */
+#define KYCR1 0xA44B0000
+#define KYCR2 0xA44B0004
+#define KYINDR 0xA44B0008
+#define KYOUTDR 0xA44B000C
+
+/* MMCIF */
+#define CMDR0 0xA4448000
+#define CMDR1 0xA4448001
+#define CMDR2 0xA4448002
+#define CMDR3 0xA4448003
+#define CMDR4 0xA4448004
+#define CMDR5 0xA4448005
+#define CMDSTRT 0xA4448006
+#define OPCR 0xA444800A
+#define CSTR 0xA444800B
+#define INTCR0 0xA444800C
+#define INTCR1 0xA444800D
+#define INTSTR0 0xA444800E
+#define INTSTR1 0xA444800F
+#define CLKON 0xA4448010
+#define CTOCR 0xA4448011
+#define VDCNT 0xA4448012
+#define TBCR 0xA4448014
+#define MODER 0xA4448016
+#define CMDTYR 0xA4448018
+#define RSPTYR 0xA4448019
+#define TBNCR 0xA444801A
+#define RSPR0 0xA4448020
+#define RSPR1 0xA4448021
+#define RSPR2 0xA4448022
+#define RSPR3 0xA4448023
+#define RSPR4 0xA4448024
+#define RSPR5 0xA4448025
+#define RSPR6 0xA4448026
+#define RSPR7 0xA4448027
+#define RSPR8 0xA4448028
+#define RSPR9 0xA4448029
+#define RSPR10 0xA444802A
+#define RSPR11 0xA444802B
+#define RSPR12 0xA444802C
+#define RSPR13 0xA444802D
+#define RSPR14 0xA444802E
+#define RSPR15 0xA444802F
+#define RSPR16 0xA4448030
+#define RSPRD 0xA4448031
+#define DTOUTR 0xA4448032
+#define DR 0xA4448040
+#define FIFOCLR 0xA4448042
+#define DMACR 0xA4448044
+#define INTCR2 0xA4448046
+#define INTSTR2 0xA4448048
+
+/* Z3D3 */
+#define DLBI 0xFD980000
+#define DLBD0 0xFD980080
+#define DLBD1 0xFD980100
+#define GEWM 0xFD984000
+#define ICD0 0xFD988000
+#define ICD1 0xFD989000
+#define ICT 0xFD98A000
+#define ILM 0xFD98C000
+#define FLM0 0xFD98C800
+#define FLM1 0xFD98D000
+#define FLUT 0xFD98D800
+#define Z3D_PC 0xFD98E400
+#define Z3D_PCSP 0xFD98E404
+#define Z3D_PAR 0xFD98E408
+#define Z3D_IMADR 0xFD98E40C
+#define Z3D_BTR0 0xFD98E410
+#define Z3D_BTR1 0xFD98E414
+#define Z3D_BTR2 0xFD98E418
+#define Z3D_BTR3 0xFD98E41C
+#define Z3D_LC0 0xFD98E420
+#define Z3D_LC1 0xFD98E424
+#define Z3D_LC2 0xFD98E428
+#define Z3D_LC3 0xFD98E42C
+#define Z3D_FR0 0xFD98E430
+#define Z3D_FR1 0xFD98E434
+#define Z3D_FR2 0xFD98E438
+#define Z3D_SR 0xFD98E440
+#define Z3D_SMDR 0xFD98E444
+#define Z3D_PBIR 0xFD98E448
+#define Z3D_DMDR 0xFD98E44C
+#define Z3D_IREG 0xFD98E460
+#define Z3D_AR00 0xFD98E480
+#define Z3D_AR01 0xFD98E484
+#define Z3D_AR02 0xFD98E488
+#define Z3D_AR03 0xFD98E48C
+#define Z3D_BR00 0xFD98E490
+#define Z3D_BR01 0xFD98E494
+#define Z3D_IXR00 0xFD98E4A0
+#define Z3D_IXR01 0xFD98E4A4
+#define Z3D_IXR02 0xFD98E4A8
+#define Z3D_IXR03 0xFD98E4AC
+#define Z3D_AR10 0xFD98E4C0
+#define Z3D_AR11 0xFD98E4C4
+#define Z3D_AR12 0xFD98E4C8
+#define Z3D_AR13 0xFD98E4CC
+#define Z3D_BR10 0xFD98E4D0
+#define Z3D_BR11 0xFD98E4D4
+#define Z3D_IXR10 0xFD98E4E0
+#define Z3D_IXR11 0xFD98E4E4
+#define Z3D_IXR12 0xFD98E4E8
+#define Z3D_IXR13 0xFD98E4EC
+#define Z3D_AR20 0xFD98E500
+#define Z3D_AR21 0xFD98E504
+#define Z3D_AR22 0xFD98E508
+#define Z3D_AR23 0xFD98E50C
+#define Z3D_BR20 0xFD98E510
+#define Z3D_BR21 0xFD98E514
+#define Z3D_IXR20 0xFD98E520
+#define Z3D_IXR21 0xFD98E524
+#define Z3D_IXR22 0xFD98E528
+#define Z3D_IXR23 0xFD98E52C
+#define Z3D_MR0 0xFD98E540
+#define Z3D_MR1 0xFD98E544
+#define Z3D_MR2 0xFD98E548
+#define Z3D_MR3 0xFD98E54C
+#define Z3D_WORKRST 0xFD98E558
+#define Z3D_WORKWST 0xFD98E55C
+#define Z3D_DBADR 0xFD98E560
+#define Z3D_DLBPRST 0xFD98E564
+#define Z3D_DLBRST 0xFD98E568
+#define Z3D_DLBWST 0xFD98E56C
+#define Z3D_UDR0 0xFD98E570
+#define Z3D_UDR1 0xFD98E574
+#define Z3D_UDR2 0xFD98E578
+#define Z3D_UDR3 0xFD98E57C
+#define Z3D_CCR0 0xFD98E580
+#define Z3D_CCR1 0xFD98E584
+#define Z3D_EXPR 0xFD98E588
+#define Z3D_V0_X 0xFD9A0000
+#define Z3D_V0_Y 0xFD9A0004
+#define Z3D_V0_Z 0xFD9A0008
+#define Z3D_V0_W 0xFD9A000C
+#define Z3D_V0_A 0xFD9A0010
+#define Z3D_V0_R 0xFD9A0014
+#define Z3D_V0_G 0xFD9A0018
+#define Z3D_V0_B 0xFD9A001C
+#define Z3D_V0_F 0xFD9A0020
+#define Z3D_V0_SR 0xFD9A0024
+#define Z3D_V0_SG 0xFD9A0028
+#define Z3D_V0_SB 0xFD9A002C
+#define Z3D_V0_U0 0xFD9A0030
+#define Z3D_V0_V0 0xFD9A0034
+#define Z3D_V0_U1 0xFD9A0038
+#define Z3D_V0_V1 0xFD9A003C
+#define Z3D_V1_X 0xFD9A0080
+#define Z3D_V1_Y 0xFD9A0084
+#define Z3D_V1_Z 0xFD9A0088
+#define Z3D_V1_W 0xFD9A008C
+#define Z3D_V1_A 0xFD9A0090
+#define Z3D_V1_R 0xFD9A0094
+#define Z3D_V1_G 0xFD9A0098
+#define Z3D_V1_B 0xFD9A009C
+#define Z3D_V1_F 0xFD9A00A0
+#define Z3D_V1_SR 0xFD9A00A4
+#define Z3D_V1_SG 0xFD9A00A8
+#define Z3D_V1_SB 0xFD9A00AC
+#define Z3D_V1_U0 0xFD9A00B0
+#define Z3D_V1_V0 0xFD9A00B4
+#define Z3D_V1_U1 0xFD9A00B8
+#define Z3D_V1_V1 0xFD9A00BC
+#define Z3D_V2_X 0xFD9A0100
+#define Z3D_V2_Y 0xFD9A0104
+#define Z3D_V2_Z 0xFD9A0108
+#define Z3D_V2_W 0xFD9A010C
+#define Z3D_V2_A 0xFD9A0110
+#define Z3D_V2_R 0xFD9A0114
+#define Z3D_V2_G 0xFD9A0118
+#define Z3D_V2_B 0xFD9A011C
+#define Z3D_V2_F 0xFD9A0120
+#define Z3D_V2_SR 0xFD9A0124
+#define Z3D_V2_SG 0xFD9A0128
+#define Z3D_V2_SB 0xFD9A012C
+#define Z3D_V2_U0 0xFD9A0130
+#define Z3D_V2_V0 0xFD9A0134
+#define Z3D_V2_U1 0xFD9A0138
+#define Z3D_V2_V1 0xFD9A013C
+#define Z3D_RENDER 0xFD9A0180
+#define Z3D_POLYGON_OFFSET 0xFD9A0184
+#define Z3D_VERTEX_CONTROL 0xFD9A0200
+#define Z3D_STATE_MODE 0xFD9A0204
+#define Z3D_FPU_MODE 0xFD9A0318
+#define Z3D_SCISSOR_MIN 0xFD9A0400
+#define Z3D_SCISSOR_MAX 0xFD9A0404
+#define Z3D_TEXTURE_MODE_A 0xFD9A0408
+#define Z3D_TEXTURE_MODE_B 0xFD9A040C
+#define Z3D_TEXTURE_BASE_HI_A 0xFD9A0418
+#define Z3D_TEXTURE_BASE_LO_A 0xFD9A041C
+#define Z3D_TEXTURE_BASE_HI_B 0xFD9A0420
+#define Z3D_TEXTURE_BASE_LO_B 0xFD9A0424
+#define Z3D_TEXTURE_ALPHA_A0 0xFD9A0438
+#define Z3D_TEXTURE_ALPHA_A1 0xFD9A043C
+#define Z3D_TEXTURE_ALPHA_A2 0xFD9A0440
+#define Z3D_TEXTURE_ALPHA_A3 0xFD9A0444
+#define Z3D_TEXTURE_ALPHA_A4 0xFD9A0448
+#define Z3D_TEXTURE_ALPHA_A5 0xFD9A044C
+#define Z3D_TEXTURE_ALPHA_B0 0xFD9A0450
+#define Z3D_TEXTURE_ALPHA_B1 0xFD9A0454
+#define Z3D_TEXTURE_ALPHA_B2 0xFD9A0458
+#define Z3D_TEXTURE_ALPHA_B3 0xFD9A045C
+#define Z3D_TEXTURE_ALPHA_B4 0xFD9A0460
+#define Z3D_TEXTURE_ALPHA_B5 0xFD9A0464
+#define Z3D_TEXTURE_FLUSH 0xFD9A0498
+#define Z3D_GAMMA_TABLE0 0xFD9A049C
+#define Z3D_GAMMA_TABLE1 0xFD9A04A0
+#define Z3D_GAMMA_TABLE2 0xFD9A04A4
+#define Z3D_ALPHA_TEST 0xFD9A0800
+#define Z3D_STENCIL_TEST 0xFD9A0804
+#define Z3D_DEPTH_ROP_BLEND_DITHER 0xFD9A0808
+#define Z3D_MASK 0xFD9A080C
+#define Z3D_FBUS_MODE 0xFD9A0810
+#define Z3D_GNT_SET 0xFD9A0814
+#define Z3D_BETWEEN_TEST 0xFD9A0818
+#define Z3D_FB_BASE 0xFD9A081C
+#define Z3D_LCD_SIZE 0xFD9A0820
+#define Z3D_FB_FLUSH 0xFD9A0824
+#define Z3D_CACHE_INVALID 0xFD9A0828
+#define Z3D_SC_MODE 0xFD9A0830
+#define Z3D_SC0_MIN 0xFD9A0834
+#define Z3D_SC0_MAX 0xFD9A0838
+#define Z3D_SC1_MIN 0xFD9A083C
+#define Z3D_SC1_MAX 0xFD9A0840
+#define Z3D_SC2_MIN 0xFD9A0844
+#define Z3D_SC2_MAX 0xFD9A0848
+#define Z3D_SC3_MIN 0xFD9A084C
+#define Z3D_SC3_MAX 0xFD9A0850
+#define Z3D_READRESET 0xFD9A0854
+#define Z3D_DET_MIN 0xFD9A0858
+#define Z3D_DET_MAX 0xFD9A085C
+#define Z3D_FB_BASE_SR 0xFD9A0860
+#define Z3D_LCD_SIZE_SR 0xFD9A0864
+#define Z3D_2D_CTRL_STATUS 0xFD9A0C00
+#define Z3D_2D_SIZE 0xFD9A0C04
+#define Z3D_2D_SRCLOC 0xFD9A0C08
+#define Z3D_2D_DSTLOC 0xFD9A0C0C
+#define Z3D_2D_DMAPORT 0xFD9A0C10
+#define Z3D_2D_CONSTANT_SOURCE0 0xFD9A0C14
+#define Z3D_2D_CONSTANT_SOURCE1 0xFD9A0C18
+#define Z3D_2D_STPCOLOR0 0xFD9A0C1C
+#define Z3D_2D_STPCOLOR1 0xFD9A0C20
+#define Z3D_2D_STPPARAMETER_SET0 0xFD9A0C24
+#define Z3D_2D_STPPARAMETER_SET1 0xFD9A0C28
+#define Z3D_2D_STPPAT_0 0xFD9A0C40
+#define Z3D_2D_STPPAT_1 0xFD9A0C44
+#define Z3D_2D_STPPAT_2 0xFD9A0C48
+#define Z3D_2D_STPPAT_3 0xFD9A0C4C
+#define Z3D_2D_STPPAT_4 0xFD9A0C50
+#define Z3D_2D_STPPAT_5 0xFD9A0C54
+#define Z3D_2D_STPPAT_6 0xFD9A0C58
+#define Z3D_2D_STPPAT_7 0xFD9A0C5C
+#define Z3D_2D_STPPAT_8 0xFD9A0C60
+#define Z3D_2D_STPPAT_9 0xFD9A0C64
+#define Z3D_2D_STPPAT_10 0xFD9A0C68
+#define Z3D_2D_STPPAT_11 0xFD9A0C6C
+#define Z3D_2D_STPPAT_12 0xFD9A0C70
+#define Z3D_2D_STPPAT_13 0xFD9A0C74
+#define Z3D_2D_STPPAT_14 0xFD9A0C78
+#define Z3D_2D_STPPAT_15 0xFD9A0C7C
+#define Z3D_2D_STPPAT_16 0xFD9A0C80
+#define Z3D_2D_STPPAT_17 0xFD9A0C84
+#define Z3D_2D_STPPAT_18 0xFD9A0C88
+#define Z3D_2D_STPPAT_19 0xFD9A0C8C
+#define Z3D_2D_STPPAT_20 0xFD9A0C90
+#define Z3D_2D_STPPAT_21 0xFD9A0C94
+#define Z3D_2D_STPPAT_22 0xFD9A0C98
+#define Z3D_2D_STPPAT_23 0xFD9A0C9C
+#define Z3D_2D_STPPAT_24 0xFD9A0CA0
+#define Z3D_2D_STPPAT_25 0xFD9A0CA4
+#define Z3D_2D_STPPAT_26 0xFD9A0CA8
+#define Z3D_2D_STPPAT_27 0xFD9A0CAC
+#define Z3D_2D_STPPAT_28 0xFD9A0CB0
+#define Z3D_2D_STPPAT_29 0xFD9A0CB4
+#define Z3D_2D_STPPAT_30 0xFD9A0CB8
+#define Z3D_2D_STPPAT_31 0xFD9A0CBC
+#define Z3D_WR_CTRL 0xFD9A1000
+#define Z3D_WR_P0 0xFD9A1004
+#define Z3D_WR_P1 0xFD9A1008
+#define Z3D_WR_P2 0xFD9A100C
+#define Z3D_WR_FGC 0xFD9A1010
+#define Z3D_WR_BGC 0xFD9A1014
+#define Z3D_WR_SZ 0xFD9A1018
+#define Z3D_WR_PATPARAM 0xFD9A101C
+#define Z3D_WR_PAT 0xFD9A1020
+#define Z3D_SYS_STATUS 0xFD9A1400
+#define Z3D_SYS_RESET 0xFD9A1404
+#define Z3D_SYS_CLK 0xFD9A1408
+#define Z3D_SYS_CONF 0xFD9A140C
+#define Z3D_SYS_VERSION 0xFD9A1410
+#define Z3D_SYS_DBINV 0xFD9A1418
+#define Z3D_SYS_I2F_FMT 0xFD9A1420
+#define Z3D_SYS_I2F_SRC 0xFD9A1424
+#define Z3D_SYS_I2F_DST 0xFD9A1428
+#define Z3D_SYS_GBCNT 0xFD9A1430
+#define Z3D_SYS_BSYCNT 0xFD9A1434
+#define Z3D_SYS_INT_STATUS 0xFD9A1450
+#define Z3D_SYS_INT_MASK 0xFD9A1454
+#define Z3D_SYS_INT_CLEAR 0xFD9A1458
+#define TCD0 0xFD9C0000
+#define TCD1 0xFD9C0400
+#define TCD2 0xFD9C0800
+#define TCD3 0xFD9C0C00
+#define TCT0 0xFD9C1000
+#define TCT1 0xFD9C1400
+#define TCT2 0xFD9C1800
+#define TCT3 0xFD9C1C00
+
+/* PFC */
+#define PACR 0xA4050100
+#define PBCR 0xA4050102
+#define PCCR 0xA4050104
+#define PDCR 0xA4050106
+#define PECR 0xA4050108
+#define PFCR 0xA405010A
+#define PGCR 0xA405010C
+#define PHCR 0xA405010E
+#define PJCR 0xA4050110
+#define PKCR 0xA4050112
+#define PLCR 0xA4050114
+#define PMCR 0xA4050116
+#define PNCR 0xA4050118
+#define PQCR 0xA405011A
+#define PRCR 0xA405011C
+#define PSCR 0xA405011E
+#define PTCR 0xA4050140
+#define PUCR 0xA4050142
+#define PVCR 0xA4050144
+#define PWCR 0xA4050146
+#define PXCR 0xA4050148
+#define PYCR 0xA405014A
+#define PZCR 0xA405014C
+#define PSELA 0xA405014E
+#define PSELB 0xA4050150
+#define PSELC 0xA4050152
+#define PSELD 0xA4050154
+#define PSELE 0xA4050156
+#define HIZCRA 0xA4050158
+#define HIZCRB 0xA405015A
+#define HIZCRC 0xA405015C
+#define MSELCR 0xA405015C
+#define PULCR 0xA405015E
+#define DRVCR 0xA4050180
+#define SBSCR 0xA4050182
+#define AUDTHCR 0xA4050184
+#define PSELF 0xA4050186
+
+/* I/O Port */
+#define PADR 0xA4050120
+#define PBDR 0xA4050122
+#define PCDR 0xA4050124
+#define PDDR 0xA4050126
+#define PEDR 0xA4050128
+#define PFDR 0xA405012A
+#define PGDR 0xA405012C
+#define PHDR 0xA405012E
+#define PJDR 0xA4050130
+#define PKDR 0xA4050132
+#define PLDR 0xA4050134
+#define PMDR 0xA4050136
+#define PNDR 0xA4050138
+#define PQDR 0xA405013A
+#define PRDR 0xA405013C
+#define PSDR 0xA405013E
+#define PTDR 0xA4050160
+#define PUDR 0xA4050162
+#define PVDR 0xA4050164
+#define PWDR 0xA4050166
+#define PYDR 0xA4050168
+#define PZDR 0xA405016A
+
+/* UBC */
+#define CBR0 0xFF200000
+#define CRR0 0xFF200004
+#define CAR0 0xFF200008
+#define CAMR0 0xFF20000C
+#define CBR1 0xFF200020
+#define CRR1 0xFF200024
+#define CAR1 0xFF200028
+#define CAMR1 0xFF20002C
+#define CDR1 0xFF200030
+#define CDMR1 0xFF200034
+#define CETR1 0xFF200038
+#define CCMFR 0xFF200600
+#define CBCR 0xFF200620
+
+/* H-UDI */
+#define SDIR 0xFC110000
+#define SDDRH 0xFC110008
+#define SDDRL 0xFC11000A
+#define SDINT 0xFC110018
+
+#endif /* _ASM_CPU_SH7722_H_ */
diff --git a/include/asm-sh/cpu_sh7750.h b/include/asm-sh/cpu_sh7750.h
new file mode 100644
index 0000000..bb6461a
--- /dev/null
+++ b/include/asm-sh/cpu_sh7750.h
@@ -0,0 +1,196 @@
+/*
+ * (C) Copyright 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * SH7750/SH7750S/SH7750R/SH7751/SH7751R
+ * Internal I/O register
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_CPU_SH7750_H_
+#define _ASM_CPU_SH7750_H_
+
+#ifdef CONFIG_CPU_TYPE_R
+#define CACHE_OC_NUM_WAYS 2
+#define CCR_CACHE_INIT 0x8000090d /* EMODE,ICI,ICE(16k),OCI,P1-wb,OCE(32k) */
+#else
+#define CACHE_OC_NUM_WAYS 1
+#define CCR_CACHE_INIT 0x0000090b
+#endif
+
+/* OCN */
+#define PTEH 0xFF000000
+#define PTEL 0xFF000004
+#define TTB 0xFF000008
+#define TEA 0xFF00000C
+#define MMUCR 0xFF000010
+#define BASRA 0xFF000014
+#define BASRB 0xFF000018
+#define CCR 0xFF00001C
+#define TRA 0xFF000020
+#define EXPEVT 0xFF000024
+#define INTEVT 0xFF000028
+#define PTEA 0xFF000034
+#define QACR0 0xFF000038
+#define QACR1 0xFF00003C
+
+/* UBC */
+#define BARA 0xFF200000
+#define BAMRA 0xFF200004
+#define BBRA 0xFF200008
+#define BARB 0xFF20000C
+#define BAMRB 0xFF200010
+#define BBRB 0xFF200014
+#define BDRB 0xFF200018
+#define BDMRB 0xFF20001C
+#define BRCR 0xFF200020
+
+/* BSC */
+#define BCR1 0xFF800000
+#define BCR2 0xFF800004
+#define BCR3 0xFF800050
+#define BCR4 0xFE0A00F0
+#define WCR1 0xFF800008
+#define WCR2 0xFF80000C
+#define WCR3 0xFF800010
+#define MCR 0xFF800014
+#define PCR 0xFF800018
+#define RTCSR 0xFF80001C
+#define RTCNT 0xFF800020
+#define RTCOR 0xFF800024
+#define RFCR 0xFF800028
+#define PCTRA 0xFF80002C
+#define PDTRA 0xFF800030
+#define PCTRB 0xFF800040
+#define PDTRB 0xFF800044
+#define GPIOIC 0xFF800048
+
+/* DMAC */
+#define SAR0 0xFFA00000
+#define DAR0 0xFFA00004
+#define DMATCR0 0xFFA00008
+#define CHCR0 0xFFA0000C
+#define SAR1 0xFFA00010
+#define DAR1 0xFFA00014
+#define DMATCR1 0xFFA00018
+#define CHCR1 0xFFA0001C
+#define SAR2 0xFFA00020
+#define DAR2 0xFFA00024
+#define DMATCR2 0xFFA00028
+#define CHCR2 0xFFA0002C
+#define SAR3 0xFFA00030
+#define DAR3 0xFFA00034
+#define DMATCR3 0xFFA00038
+#define CHCR3 0xFFA0003C
+#define DMAOR 0xFFA00040
+#define SAR4 0xFFA00050
+#define DAR4 0xFFA00054
+#define DMATCR4 0xFFA00058
+
+/* CPG */
+#define FRQCR 0xFFC00000
+#define STBCR 0xFFC00004
+#define WTCNT 0xFFC00008
+#define WTCSR 0xFFC0000C
+#define STBCR2 0xFFC00010
+
+/* RTC */
+#define R64CNT 0xFFC80000
+#define RSECCNT 0xFFC80004
+#define RMINCNT 0xFFC80008
+#define RHRCNT 0xFFC8000C
+#define RWKCNT 0xFFC80010
+#define RDAYCNT 0xFFC80014
+#define RMONCNT 0xFFC80018
+#define RYRCNT 0xFFC8001C
+#define RSECAR 0xFFC80020
+#define RMINAR 0xFFC80024
+#define RHRAR 0xFFC80028
+#define RWKAR 0xFFC8002C
+#define RDAYAR 0xFFC80030
+#define RMONAR 0xFFC80034
+#define RCR1 0xFFC80038
+#define RCR2 0xFFC8003C
+#define RCR3 0xFFC80050
+#define RYRAR 0xFFC80054
+
+/* ICR */
+#define ICR 0xFFD00000
+#define IPRA 0xFFD00004
+#define IPRB 0xFFD00008
+#define IPRC 0xFFD0000C
+#define IPRD 0xFFD00010
+#define INTPRI 0xFE080000
+#define INTREQ 0xFE080020
+#define INTMSK 0xFE080040
+#define INTMSKCL 0xFE080060
+
+/* CPG */
+#define CLKSTP 0xFE0A0000
+#define CLKSTPCLR 0xFE0A0008
+
+/* TMU */
+#define TSTR2 0xFE100004
+#define TCOR3 0xFE100008
+#define TCNT3 0xFE10000C
+#define TCR3 0xFE100010
+#define TCOR4 0xFE100014
+#define TCNT4 0xFE100018
+#define TCR4 0xFE10001C
+#define TOCR 0xFFD80000
+#define TSTR0 0xFFD80004
+#define TCOR0 0xFFD80008
+#define TCNT0 0xFFD8000C
+#define TCR0 0xFFD80010
+#define TCOR1 0xFFD80014
+#define TCNT1 0xFFD80018
+#define TCR1 0xFFD8001C
+#define TCOR2 0xFFD80020
+#define TCNT2 0xFFD80024
+#define TCR2 0xFFD80028
+#define TCPR2 0xFFD8002C
+#define TSTR TSTR0
+
+/* SCI */
+#define SCSMR1 0xFFE00000
+#define SCBRR1 0xFFE00004
+#define SCSCR1 0xFFE00008
+#define SCTDR1 0xFFE0000C
+#define SCSSR1 0xFFE00010
+#define SCRDR1 0xFFE00014
+#define SCSCMR1 0xFFE00018
+#define SCSPTR1 0xFFE0001C
+#define SCF0_BASE SCSMR1
+
+/* SCIF */
+#define SCSMR2 0xFFE80000
+#define SCBRR2 0xFFE80004
+#define SCSCR2 0xFFE80008
+#define SCFTDR2 0xFFE8000C
+#define SCFSR2 0xFFE80010
+#define SCFRDR2 0xFFE80014
+#define SCFCR2 0xFFE80018
+#define SCFDR2 0xFFE8001C
+#define SCSPTR2 0xFFE80020
+#define SCLSR2 0xFFE80024
+#define SCIF1_BASE SCSMR2
+
+/* H-UDI */
+#define SDIR 0xFFF00000
+#define SDDR 0xFFF00008
+#define SDINT 0xFFF00014
+
+#endif /* _ASM_CPU_SH7750_H_ */
diff --git a/include/asm-sh/errno.h b/include/asm-sh/errno.h
new file mode 100644
index 0000000..0d2c618
--- /dev/null
+++ b/include/asm-sh/errno.h
@@ -0,0 +1,156 @@
+/*
+ * U-boot - errno.h Error number defines
+ *
+ * Copyright (c) 2005-2007 Analog Devices Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _BLACKFIN_ERRNO_H
+#define _BLACKFIN_ERRNO_H
+
+#define EPERM 1 /* Operation not permitted */
+#define ENOENT 2 /* No such file or directory */
+#define ESRCH 3 /* No such process */
+#define EINTR 4 /* Interrupted system call */
+#define EIO 5 /* I/O error */
+#define ENXIO 6 /* No such device or address */
+#define E2BIG 7 /* Arg list too long */
+#define ENOEXEC 8 /* Exec format error */
+#define EBADF 9 /* Bad file number */
+#define ECHILD 10 /* No child processes */
+#define EAGAIN 11 /* Try again */
+#define ENOMEM 12 /* Out of memory */
+#define EACCES 13 /* Permission denied */
+#define EFAULT 14 /* Bad address */
+#define ENOTBLK 15 /* Block device required */
+#define EBUSY 16 /* Device or resource busy */
+#define EEXIST 17 /* File exists */
+#define EXDEV 18 /* Cross-device link */
+#define ENODEV 19 /* No such device */
+#define ENOTDIR 20 /* Not a directory */
+#define EISDIR 21 /* Is a directory */
+#define EINVAL 22 /* Invalid argument */
+#define ENFILE 23 /* File table overflow */
+#define EMFILE 24 /* Too many open files */
+#define ENOTTY 25 /* Not a typewriter */
+#define ETXTBSY 26 /* Text file busy */
+#define EFBIG 27 /* File too large */
+#define ENOSPC 28 /* No space left on device */
+#define ESPIPE 29 /* Illegal seek */
+#define EROFS 30 /* Read-only file system */
+#define EMLINK 31 /* Too many links */
+#define EPIPE 32 /* Broken pipe */
+#define EDOM 33 /* Math argument out of domain of func */
+#define ERANGE 34 /* Math result not representable */
+#define EDEADLK 35 /* Resource deadlock would occur */
+#define ENAMETOOLONG 36 /* File name too long */
+#define ENOLCK 37 /* No record locks available */
+#define ENOSYS 38 /* Function not implemented */
+#define ENOTEMPTY 39 /* Directory not empty */
+#define ELOOP 40 /* Too many symbolic links encountered */
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+#define ENOMSG 42 /* No message of desired type */
+#define EIDRM 43 /* Identifier removed */
+#define ECHRNG 44 /* Channel number out of range */
+#define EL2NSYNC 45 /* Level 2 not synchronized */
+#define EL3HLT 46 /* Level 3 halted */
+#define EL3RST 47 /* Level 3 reset */
+#define ELNRNG 48 /* Link number out of range */
+#define EUNATCH 49 /* Protocol driver not attached */
+#define ENOCSI 50 /* No CSI structure available */
+#define EL2HLT 51 /* Level 2 halted */
+#define EBADE 52 /* Invalid exchange */
+#define EBADR 53 /* Invalid request descriptor */
+#define EXFULL 54 /* Exchange full */
+#define ENOANO 55 /* No anode */
+#define EBADRQC 56 /* Invalid request code */
+#define EBADSLT 57 /* Invalid slot */
+
+#define EDEADLOCK EDEADLK
+
+#define EBFONT 59 /* Bad font file format */
+#define ENOSTR 60 /* Device not a stream */
+#define ENODATA 61 /* No data available */
+#define ETIME 62 /* Timer expired */
+#define ENOSR 63 /* Out of streams resources */
+#define ENONET 64 /* Machine is not on the network */
+#define ENOPKG 65 /* Package not installed */
+#define EREMOTE 66 /* Object is remote */
+#define ENOLINK 67 /* Link has been severed */
+#define EADV 68 /* Advertise error */
+#define ESRMNT 69 /* Srmount error */
+#define ECOMM 70 /* Communication error on send */
+#define EPROTO 71 /* Protocol error */
+#define EMULTIHOP 72 /* Multihop attempted */
+#define EDOTDOT 73 /* RFS specific error */
+#define EBADMSG 74 /* Not a data message */
+#define EOVERFLOW 75 /* Value too large for defined data type */
+#define ENOTUNIQ 76 /* Name not unique on network */
+#define EBADFD 77 /* File descriptor in bad state */
+#define EREMCHG 78 /* Remote address changed */
+#define ELIBACC 79 /* Can not access a needed shared library */
+#define ELIBBAD 80 /* Accessing a corrupted shared library */
+#define ELIBSCN 81 /* .lib section in a.out corrupted */
+#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
+#define ELIBEXEC 83 /* Cannot exec a shared library directly */
+#define EILSEQ 84 /* Illegal byte sequence */
+#define ERESTART 85 /* Interrupted system call should be restarted */
+#define ESTRPIPE 86 /* Streams pipe error */
+#define EUSERS 87 /* Too many users */
+#define ENOTSOCK 88 /* Socket operation on non-socket */
+#define EDESTADDRREQ 89 /* Destination address required */
+#define EMSGSIZE 90 /* Message too long */
+#define EPROTOTYPE 91 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 92 /* Protocol not available */
+#define EPROTONOSUPPORT 93 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
+#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT 96 /* Protocol family not supported */
+#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
+#define EADDRINUSE 98 /* Address already in use */
+#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
+#define ENETDOWN 100 /* Network is down */
+#define ENETUNREACH 101 /* Network is unreachable */
+#define ENETRESET 102 /* Network dropped connection because of reset */
+#define ECONNABORTED 103 /* Software caused connection abort */
+#define ECONNRESET 104 /* Connection reset by peer */
+#define ENOBUFS 105 /* No buffer space available */
+#define EISCONN 106 /* Transport endpoint is already connected */
+#define ENOTCONN 107 /* Transport endpoint is not connected */
+#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
+#define ETOOMANYREFS 109 /* Too many references: cannot splice */
+#define ETIMEDOUT 110 /* Connection timed out */
+#define ECONNREFUSED 111 /* Connection refused */
+#define EHOSTDOWN 112 /* Host is down */
+#define EHOSTUNREACH 113 /* No route to host */
+#define EALREADY 114 /* Operation already in progress */
+#define EINPROGRESS 115 /* Operation now in progress */
+#define ESTALE 116 /* Stale NFS file handle */
+#define EUCLEAN 117 /* Structure needs cleaning */
+#define ENOTNAM 118 /* Not a XENIX named type file */
+#define ENAVAIL 119 /* No XENIX semaphores available */
+#define EISNAM 120 /* Is a named type file */
+#define EREMOTEIO 121 /* Remote I/O error */
+#define EDQUOT 122 /* Quota exceeded */
+
+#define ENOMEDIUM 123 /* No medium found */
+#define EMEDIUMTYPE 124 /* Wrong medium type */
+
+#endif
diff --git a/include/asm-sh/global_data.h b/include/asm-sh/global_data.h
new file mode 100644
index 0000000..0a44a34
--- /dev/null
+++ b/include/asm-sh/global_data.h
@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_SH_GLOBALDATA_H_
+#define __ASM_SH_GLOBALDATA_H_
+
+typedef struct global_data
+{
+ bd_t *bd;
+ unsigned long flags;
+ unsigned long baudrate;
+ unsigned long cpu_clk; /* CPU clock in Hz! */
+ unsigned long have_console; /* serial_init() was called */
+ unsigned long ram_size; /* RAM size */
+ unsigned long reloc_off; /* Relocation Offset */
+ unsigned long env_addr; /* Address of Environment struct */
+ unsigned long env_valid; /* Checksum of Environment valid */
+ void **jt; /* Standalone app jump table */
+}gd_t;
+
+#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
+#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
+#define GD_FLG_SILENT 0x00004 /* Silent mode */
+
+#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm ("r13")
+
+#endif /* __ASM_SH_GLOBALDATA_H_ */
diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h
new file mode 100644
index 0000000..03427ad
--- /dev/null
+++ b/include/asm-sh/io.h
@@ -0,0 +1,231 @@
+/*
+ * linux/include/asm-sh/io.h
+ *
+ * Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 16-Sep-1996 RMK Inlined the inx/outx functions & optimised for both
+ * constant addresses and variable addresses.
+ * 04-Dec-1997 RMK Moved a lot of this stuff to the new architecture
+ * specific IO header files.
+ * 27-Mar-1999 PJB Second parameter of memcpy_toio is const..
+ * 04-Apr-1999 PJB Added check_signature.
+ * 12-Dec-1999 RMK More cleanups
+ * 18-Jun-2000 RMK Removed virt_to_* and friends definitions
+ */
+#ifndef __ASM_SH_IO_H
+#define __ASM_SH_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*
+ * Generic virtual read/write. Note that we don't support half-word
+ * read/writes. We define __arch_*[bl] here, and leave __arch_*w
+ * to the architecture specific code.
+ */
+#define __arch_getb(a) (*(volatile unsigned char *)(a))
+#define __arch_getw(a) (*(volatile unsigned short *)(a))
+#define __arch_getl(a) (*(volatile unsigned int *)(a))
+
+#define __arch_putb(v,a) (*(volatile unsigned char *)(a) = (v))
+#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v))
+#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
+
+extern void __raw_writesb(unsigned int addr, const void *data, int bytelen);
+extern void __raw_writesw(unsigned int addr, const void *data, int wordlen);
+extern void __raw_writesl(unsigned int addr, const void *data, int longlen);
+
+extern void __raw_readsb(unsigned int addr, void *data, int bytelen);
+extern void __raw_readsw(unsigned int addr, void *data, int wordlen);
+extern void __raw_readsl(unsigned int addr, void *data, int longlen);
+
+#define __raw_writeb(v,a) __arch_putb(v,a)
+#define __raw_writew(v,a) __arch_putw(v,a)
+#define __raw_writel(v,a) __arch_putl(v,a)
+
+#define __raw_readb(a) __arch_getb(a)
+#define __raw_readw(a) __arch_getw(a)
+#define __raw_readl(a) __arch_getl(a)
+
+/*
+ * The compiler seems to be incapable of optimising constants
+ * properly. Spell it out to the compiler in some cases.
+ * These are only valid for small values of "off" (< 1<<12)
+ */
+#define __raw_base_writeb(val,base,off) __arch_base_putb(val,base,off)
+#define __raw_base_writew(val,base,off) __arch_base_putw(val,base,off)
+#define __raw_base_writel(val,base,off) __arch_base_putl(val,base,off)
+
+#define __raw_base_readb(base,off) __arch_base_getb(base,off)
+#define __raw_base_readw(base,off) __arch_base_getw(base,off)
+#define __raw_base_readl(base,off) __arch_base_getl(base,off)
+
+/*
+ * Now, pick up the machine-defined IO definitions
+ */
+#if 0 /* XXX###XXX */
+#include <asm/arch/io.h>
+#endif /* XXX###XXX */
+
+/*
+ * IO port access primitives
+ * -------------------------
+ *
+ * The SH doesn't have special IO access instructions; all IO is memory
+ * mapped. Note that these are defined to perform little endian accesses
+ * only. Their primary purpose is to access PCI and ISA peripherals.
+ *
+ * The machine specific io.h include defines __io to translate an "IO"
+ * address to a memory address.
+ *
+ * Note that we prevent GCC re-ordering or caching values in expressions
+ * by introducing sequence points into the in*() definitions. Note that
+ * __raw_* do not guarantee this behaviour.
+ *
+ * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
+ */
+#define outb(v,p) __raw_writeb(v, p)
+#define outw(v,p) __raw_writew(cpu_to_le16(v),p)
+#define outl(v,p) __raw_writel(cpu_to_le32(v),p)
+
+#define inb(p) ({ unsigned int __v = __raw_readb(p); __v; })
+#define inw(p) ({ unsigned int __v = __le16_to_cpu(__raw_readw(p)); __v; })
+#define inl(p) ({ unsigned int __v = __le32_to_cpu(__raw_readl(p)); __v; })
+
+#define outsb(p,d,l) __raw_writesb(p,d,l)
+#define outsw(p,d,l) __raw_writesw(p,d,l)
+#define outsl(p,d,l) __raw_writesl(p,d,l)
+
+#define insb(p,d,l) __raw_readsb(p,d,l)
+#define insw(p,d,l) __raw_readsw(p,d,l)
+#define insl(p,d,l) __raw_readsl(p,d,l)
+
+#define outb_p(val,port) outb((val),(port))
+#define outw_p(val,port) outw((val),(port))
+#define outl_p(val,port) outl((val),(port))
+#define inb_p(port) inb((port))
+#define inw_p(port) inw((port))
+#define inl_p(port) inl((port))
+
+#define outsb_p(port,from,len) outsb(port,from,len)
+#define outsw_p(port,from,len) outsw(port,from,len)
+#define outsl_p(port,from,len) outsl(port,from,len)
+#define insb_p(port,to,len) insb(port,to,len)
+#define insw_p(port,to,len) insw(port,to,len)
+#define insl_p(port,to,len) insl(port,to,len)
+
+/*
+ * ioremap and friends.
+ *
+ * ioremap takes a PCI memory address, as specified in
+ * linux/Documentation/IO-mapping.txt. If you want a
+ * physical address, use __ioremap instead.
+ */
+extern void * __ioremap(unsigned long offset, size_t size, unsigned long flags);
+extern void __iounmap(void *addr);
+
+/*
+ * Generic ioremap support.
+ *
+ * Define:
+ * iomem_valid_addr(off,size)
+ * iomem_to_phys(off)
+ */
+#ifdef iomem_valid_addr
+#define __arch_ioremap(off,sz,nocache) \
+ ({ \
+ unsigned long _off = (off), _size = (sz); \
+ void *_ret = (void *)0; \
+ if (iomem_valid_addr(_off, _size)) \
+ _ret = __ioremap(iomem_to_phys(_off),_size,0); \
+ _ret; \
+ })
+
+#define __arch_iounmap __iounmap
+#endif
+
+#define ioremap(off,sz) __arch_ioremap((off),(sz),0)
+#define ioremap_nocache(off,sz) __arch_ioremap((off),(sz),1)
+#define iounmap(_addr) __arch_iounmap(_addr)
+
+/*
+ * DMA-consistent mapping functions. These allocate/free a region of
+ * uncached, unwrite-buffered mapped memory space for use with DMA
+ * devices. This is the "generic" version. The PCI specific version
+ * is in pci.h
+ */
+extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle);
+extern void consistent_free(void *vaddr, size_t size, dma_addr_t handle);
+extern void consistent_sync(void *vaddr, size_t size, int rw);
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void _memcpy_fromio(void *, unsigned long, size_t);
+extern void _memcpy_toio(unsigned long, const void *, size_t);
+extern void _memset_io(unsigned long, int, size_t);
+
+/*
+ * If this architecture has PCI memory IO, then define the read/write
+ * macros. These should only be used with the cookie passed from
+ * ioremap.
+ */
+#ifdef __mem_pci
+
+#define readb(c) ({ unsigned int __v = __raw_readb(__mem_pci(c)); __v; })
+#define readw(c) ({ unsigned int __v = le16_to_cpu(__raw_readw(__mem_pci(c))); __v; })
+#define readl(c) ({ unsigned int __v = le32_to_cpu(__raw_readl(__mem_pci(c))); __v; })
+
+#define writeb(v,c) __raw_writeb(v,__mem_pci(c))
+#define writew(v,c) __raw_writew(cpu_to_le16(v),__mem_pci(c))
+#define writel(v,c) __raw_writel(cpu_to_le32(v),__mem_pci(c))
+
+#define memset_io(c,v,l) _memset_io(__mem_pci(c),(v),(l))
+#define memcpy_fromio(a,c,l) _memcpy_fromio((a),__mem_pci(c),(l))
+#define memcpy_toio(c,a,l) _memcpy_toio(__mem_pci(c),(a),(l))
+
+#define eth_io_copy_and_sum(s,c,l,b) \
+ eth_copy_and_sum((s),__mem_pci(c),(l),(b))
+
+static inline int
+check_signature(unsigned long io_addr, const unsigned char *signature,
+ int length)
+{
+ int retval = 0;
+ do {
+ if (readb(io_addr) != *signature)
+ goto out;
+ io_addr++;
+ signature++;
+ length--;
+ } while (length);
+ retval = 1;
+out:
+ return retval;
+}
+
+#elif !defined(readb)
+
+#define readb(addr) __raw_readb(addr)
+#define readw(addr) __raw_readw(addr)
+#define readl(addr) __raw_readl(addr)
+#define writeb(v,addr) __raw_writeb(v, addr)
+#define writew(v,addr) __raw_writew(v, addr)
+#define writel(v,addr) __raw_writel(v, addr)
+
+#define check_signature(io,sig,len) (0)
+
+#endif /* __mem_pci */
+
+static inline void sync(void)
+{
+}
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_IO_H */
diff --git a/include/asm-sh/irqflags.h b/include/asm-sh/irqflags.h
new file mode 100644
index 0000000..830e548
--- /dev/null
+++ b/include/asm-sh/irqflags.h
@@ -0,0 +1,126 @@
+#ifndef __ASM_SH_IRQFLAGS_H
+#define __ASM_SH_IRQFLAGS_H
+
+static inline void raw_local_irq_enable(void)
+{
+ unsigned long __dummy0, __dummy1;
+
+ __asm__ __volatile__ (
+ "stc sr, %0\n\t"
+ "and %1, %0\n\t"
+#ifdef CONFIG_CPU_HAS_SR_RB
+ "stc r6_bank, %1\n\t"
+ "or %1, %0\n\t"
+#endif
+ "ldc %0, sr\n\t"
+ : "=&r" (__dummy0), "=r" (__dummy1)
+ : "1" (~0x000000f0)
+ : "memory"
+ );
+}
+
+static inline void raw_local_irq_disable(void)
+{
+ unsigned long flags;
+
+ __asm__ __volatile__ (
+ "stc sr, %0\n\t"
+ "or #0xf0, %0\n\t"
+ "ldc %0, sr\n\t"
+ : "=&z" (flags)
+ : /* no inputs */
+ : "memory"
+ );
+}
+
+static inline void set_bl_bit(void)
+{
+ unsigned long __dummy0, __dummy1;
+
+ __asm__ __volatile__ (
+ "stc sr, %0\n\t"
+ "or %2, %0\n\t"
+ "and %3, %0\n\t"
+ "ldc %0, sr\n\t"
+ : "=&r" (__dummy0), "=r" (__dummy1)
+ : "r" (0x10000000), "r" (0xffffff0f)
+ : "memory"
+ );
+}
+
+static inline void clear_bl_bit(void)
+{
+ unsigned long __dummy0, __dummy1;
+
+ __asm__ __volatile__ (
+ "stc sr, %0\n\t"
+ "and %2, %0\n\t"
+ "ldc %0, sr\n\t"
+ : "=&r" (__dummy0), "=r" (__dummy1)
+ : "1" (~0x10000000)
+ : "memory"
+ );
+}
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+ unsigned long flags;
+
+ __asm__ __volatile__ (
+ "stc sr, %0\n\t"
+ "and #0xf0, %0\n\t"
+ : "=&z" (flags)
+ : /* no inputs */
+ : "memory"
+ );
+
+ return flags;
+}
+
+#define raw_local_save_flags(flags) \
+ do { (flags) = __raw_local_save_flags(); } while (0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+ return (flags != 0);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+ unsigned long flags = __raw_local_save_flags();
+
+ return raw_irqs_disabled_flags(flags);
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+ unsigned long flags, __dummy;
+
+ __asm__ __volatile__ (
+ "stc sr, %1\n\t"
+ "mov %1, %0\n\t"
+ "or #0xf0, %0\n\t"
+ "ldc %0, sr\n\t"
+ "mov %1, %0\n\t"
+ "and #0xf0, %0\n\t"
+ : "=&z" (flags), "=&r" (__dummy)
+ : /* no inputs */
+ : "memory"
+ );
+
+ return flags;
+}
+
+#define raw_local_irq_save(flags) \
+ do { (flags) = __raw_local_irq_save(); } while (0)
+
+#define local_irq_save raw_local_irq_save
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+ if ((flags & 0xf0) != 0xf0)
+ raw_local_irq_enable();
+}
+#define local_irq_restore raw_local_irq_restore
+
+#endif /* __ASM_SH_IRQFLAGS_H */
diff --git a/include/asm-sh/posix_types.h b/include/asm-sh/posix_types.h
new file mode 100644
index 0000000..c9d9fb8
--- /dev/null
+++ b/include/asm-sh/posix_types.h
@@ -0,0 +1,123 @@
+#ifndef __ASM_SH_POSIX_TYPES_H
+#define __ASM_SH_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned short __kernel_dev_t;
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef unsigned short __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+ int val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+ int __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+ unsigned long *__tmp = __p->fds_bits;
+ int __i;
+
+ if (__builtin_constant_p(__FDSET_LONGS)) {
+ switch (__FDSET_LONGS) {
+ case 16:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ __tmp[ 4] = 0; __tmp[ 5] = 0;
+ __tmp[ 6] = 0; __tmp[ 7] = 0;
+ __tmp[ 8] = 0; __tmp[ 9] = 0;
+ __tmp[10] = 0; __tmp[11] = 0;
+ __tmp[12] = 0; __tmp[13] = 0;
+ __tmp[14] = 0; __tmp[15] = 0;
+ return;
+
+ case 8:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ __tmp[ 4] = 0; __tmp[ 5] = 0;
+ __tmp[ 6] = 0; __tmp[ 7] = 0;
+ return;
+
+ case 4:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ return;
+ }
+ }
+ __i = __FDSET_LONGS;
+ while (__i) {
+ __i--;
+ *__tmp = 0;
+ __tmp++;
+ }
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* __ASM_SH_POSIX_TYPES_H */
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
new file mode 100644
index 0000000..bb9a35f
--- /dev/null
+++ b/include/asm-sh/processor.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_SH_PROCESSOR_H_
+#define _ASM_SH_PROCESSOR_H_
+#if defined CONFIG_SH3
+# include <asm/cpu_sh3.h>
+#elif defined (CONFIG_SH4)
+# include <asm/cpu_sh4.h>
+#endif
+#endif
diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h
new file mode 100644
index 0000000..14cc1ac
--- /dev/null
+++ b/include/asm-sh/ptrace.h
@@ -0,0 +1,112 @@
+#ifndef __ASM_SH_PTRACE_H
+#define __ASM_SH_PTRACE_H
+
+/*
+ * Copyright (C) 1999, 2000 Niibe Yutaka
+ * from linux kernel code.
+ */
+
+/*
+ * GCC defines register number like this:
+ * -----------------------------
+ * 0 - 15 are integer registers
+ * 17 - 22 are control/special registers
+ * 24 - 39 fp registers
+ * 40 - 47 xd registers
+ * 48 - fpscr register
+ * -----------------------------
+ *
+ * We follows above, except:
+ * 16 --- program counter (PC)
+ * 22 --- syscall #
+ * 23 --- floating point communication register
+ */
+#define REG_REG0 0
+#define REG_REG15 15
+
+#define REG_PC 16
+
+#define REG_PR 17
+#define REG_SR 18
+#define REG_GBR 19
+#define REG_MACH 20
+#define REG_MACL 21
+
+#define REG_SYSCALL 22
+
+#define REG_FPREG0 23
+#define REG_FPREG15 38
+#define REG_XFREG0 39
+#define REG_XFREG15 54
+
+#define REG_FPSCR 55
+#define REG_FPUL 56
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD 0x00000001
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_regs {
+ unsigned long regs[16];
+ unsigned long pc;
+ unsigned long pr;
+ unsigned long sr;
+ unsigned long gbr;
+ unsigned long mach;
+ unsigned long macl;
+ long tra;
+};
+
+/*
+ * This struct defines the way the DSP registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_dspregs {
+ unsigned long a1;
+ unsigned long a0g;
+ unsigned long a1g;
+ unsigned long m0;
+ unsigned long m1;
+ unsigned long a0;
+ unsigned long x0;
+ unsigned long x1;
+ unsigned long y0;
+ unsigned long y1;
+ unsigned long dsr;
+ unsigned long rs;
+ unsigned long re;
+ unsigned long mod;
+};
+
+#define PTRACE_GETDSPREGS 55
+#define PTRACE_SETDSPREGS 56
+
+#ifdef __KERNEL__
+#define user_mode(regs) (((regs)->sr & 0x40000000)==0)
+#define instruction_pointer(regs) ((regs)->pc)
+extern void show_regs(struct pt_regs *);
+
+#ifdef CONFIG_SH_DSP
+#define task_pt_regs(task) \
+ ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
+ - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1)
+#else
+#define task_pt_regs(task) \
+ ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
+ - sizeof(unsigned long)) - 1)
+#endif
+
+static inline unsigned long profile_pc(struct pt_regs *regs)
+{
+ unsigned long pc = instruction_pointer(regs);
+
+ if (pc >= 0xa0000000UL && pc < 0xc0000000UL)
+ pc -= 0x20000000;
+ return pc;
+}
+#endif
+
+#endif /* __ASM_SH_PTRACE_H */
diff --git a/include/asm-sh/string.h b/include/asm-sh/string.h
new file mode 100644
index 0000000..27d981b
--- /dev/null
+++ b/include/asm-sh/string.h
@@ -0,0 +1,162 @@
+#ifndef __ASM_SH_STRING_H
+#define __ASM_SH_STRING_H
+
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ * But consider these trivial functions to be public domain.
+ *
+ * from linux kernel code.
+ */
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#define __HAVE_ARCH_STRCPY
+static inline char *strcpy(char *__dest, const char *__src)
+{
+ register char *__xdest = __dest;
+ unsigned long __dummy;
+
+ __asm__ __volatile__("1:\n\t"
+ "mov.b @%1+, %2\n\t"
+ "mov.b %2, @%0\n\t"
+ "cmp/eq #0, %2\n\t"
+ "bf/s 1b\n\t"
+ " add #1, %0\n\t"
+ : "=r" (__dest), "=r" (__src), "=&z" (__dummy)
+ : "0" (__dest), "1" (__src)
+ : "memory", "t");
+
+ return __xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static inline char *strncpy(char *__dest, const char *__src, size_t __n)
+{
+ register char *__xdest = __dest;
+ unsigned long __dummy;
+
+ if (__n == 0)
+ return __xdest;
+
+ __asm__ __volatile__(
+ "1:\n"
+ "mov.b @%1+, %2\n\t"
+ "mov.b %2, @%0\n\t"
+ "cmp/eq #0, %2\n\t"
+ "bt/s 2f\n\t"
+ " cmp/eq %5,%1\n\t"
+ "bf/s 1b\n\t"
+ " add #1, %0\n"
+ "2:"
+ : "=r" (__dest), "=r" (__src), "=&z" (__dummy)
+ : "0" (__dest), "1" (__src), "r" (__src+__n)
+ : "memory", "t");
+
+ return __xdest;
+}
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char *__cs, const char *__ct)
+{
+ register int __res;
+ unsigned long __dummy;
+
+ __asm__ __volatile__(
+ "mov.b @%1+, %3\n"
+ "1:\n\t"
+ "mov.b @%0+, %2\n\t"
+ "cmp/eq #0, %3\n\t"
+ "bt 2f\n\t"
+ "cmp/eq %2, %3\n\t"
+ "bt/s 1b\n\t"
+ " mov.b @%1+, %3\n\t"
+ "add #-2, %1\n\t"
+ "mov.b @%1, %3\n\t"
+ "sub %3, %2\n"
+ "2:"
+ : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
+ : "0" (__cs), "1" (__ct)
+ : "t");
+
+ return __res;
+}
+
+#define __HAVE_ARCH_STRNCMP
+static inline int strncmp(const char *__cs, const char *__ct, size_t __n)
+{
+ register int __res;
+ unsigned long __dummy;
+
+ if (__n == 0)
+ return 0;
+
+ __asm__ __volatile__(
+ "mov.b @%1+, %3\n"
+ "1:\n\t"
+ "mov.b @%0+, %2\n\t"
+ "cmp/eq %6, %0\n\t"
+ "bt/s 2f\n\t"
+ " cmp/eq #0, %3\n\t"
+ "bt/s 3f\n\t"
+ " cmp/eq %3, %2\n\t"
+ "bt/s 1b\n\t"
+ " mov.b @%1+, %3\n\t"
+ "add #-2, %1\n\t"
+ "mov.b @%1, %3\n"
+ "2:\n\t"
+ "sub %3, %2\n"
+ "3:"
+ :"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
+ : "0" (__cs), "1" (__ct), "r" (__cs+__n)
+ : "t");
+
+ return __res;
+}
+
+#undef __HAVE_ARCH_MEMSET
+extern void *memset(void *__s, int __c, size_t __count);
+
+#undef __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+
+#undef __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+
+#undef __HAVE_ARCH_MEMCHR
+extern void *memchr(const void *__s, int __c, size_t __n);
+
+#undef __HAVE_ARCH_STRLEN
+extern size_t strlen(const char *);
+
+/* arch/sh/lib/strcasecmp.c */
+extern int strcasecmp(const char *, const char *);
+
+#else /* KERNEL */
+
+/*
+ * let user libraries deal with these,
+ * IMHO the kernel has no place defining these functions for user apps
+ */
+
+#define __HAVE_ARCH_STRCPY 1
+#define __HAVE_ARCH_STRNCPY 1
+#define __HAVE_ARCH_STRCAT 1
+#define __HAVE_ARCH_STRNCAT 1
+#define __HAVE_ARCH_STRCMP 1
+#define __HAVE_ARCH_STRNCMP 1
+#define __HAVE_ARCH_STRNICMP 1
+#define __HAVE_ARCH_STRCHR 1
+#define __HAVE_ARCH_STRRCHR 1
+#define __HAVE_ARCH_STRSTR 1
+#define __HAVE_ARCH_STRLEN 1
+#define __HAVE_ARCH_STRNLEN 1
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+#define __HAVE_ARCH_MEMMOVE 1
+#define __HAVE_ARCH_MEMSCAN 1
+#define __HAVE_ARCH_MEMCMP 1
+#define __HAVE_ARCH_MEMCHR 1
+#define __HAVE_ARCH_STRTOK 1
+
+#endif /* KERNEL */
+#endif /* __ASM_SH_STRING_H */
diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h
new file mode 100644
index 0000000..b353bc5
--- /dev/null
+++ b/include/asm-sh/system.h
@@ -0,0 +1,275 @@
+#ifndef __ASM_SH_SYSTEM_H
+#define __ASM_SH_SYSTEM_H
+
+/*
+ * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
+ * Copyright (C) 2002 Paul Mundt
+ *
+ * from linux kernel code.
+ */
+
+#include <linux/irqflags.h>
+#include <asm/types.h>
+
+/*
+ * switch_to() should switch tasks to task nr n, first
+ */
+
+#define switch_to(prev, next, last) do { \
+ struct task_struct *__last; \
+ register unsigned long *__ts1 __asm__ ("r1") = &prev->thread.sp; \
+ register unsigned long *__ts2 __asm__ ("r2") = &prev->thread.pc; \
+ register unsigned long *__ts4 __asm__ ("r4") = (unsigned long *)prev; \
+ register unsigned long *__ts5 __asm__ ("r5") = (unsigned long *)next; \
+ register unsigned long *__ts6 __asm__ ("r6") = &next->thread.sp; \
+ register unsigned long __ts7 __asm__ ("r7") = next->thread.pc; \
+ __asm__ __volatile__ (".balign 4\n\t" \
+ "stc.l gbr, @-r15\n\t" \
+ "sts.l pr, @-r15\n\t" \
+ "mov.l r8, @-r15\n\t" \
+ "mov.l r9, @-r15\n\t" \
+ "mov.l r10, @-r15\n\t" \
+ "mov.l r11, @-r15\n\t" \
+ "mov.l r12, @-r15\n\t" \
+ "mov.l r13, @-r15\n\t" \
+ "mov.l r14, @-r15\n\t" \
+ "mov.l r15, @r1 ! save SP\n\t" \
+ "mov.l @r6, r15 ! change to new stack\n\t" \
+ "mova 1f, %0\n\t" \
+ "mov.l %0, @r2 ! save PC\n\t" \
+ "mov.l 2f, %0\n\t" \
+ "jmp @%0 ! call __switch_to\n\t" \
+ " lds r7, pr ! with return to new PC\n\t" \
+ ".balign 4\n" \
+ "2:\n\t" \
+ ".long __switch_to\n" \
+ "1:\n\t" \
+ "mov.l @r15+, r14\n\t" \
+ "mov.l @r15+, r13\n\t" \
+ "mov.l @r15+, r12\n\t" \
+ "mov.l @r15+, r11\n\t" \
+ "mov.l @r15+, r10\n\t" \
+ "mov.l @r15+, r9\n\t" \
+ "mov.l @r15+, r8\n\t" \
+ "lds.l @r15+, pr\n\t" \
+ "ldc.l @r15+, gbr\n\t" \
+ : "=z" (__last) \
+ : "r" (__ts1), "r" (__ts2), "r" (__ts4), \
+ "r" (__ts5), "r" (__ts6), "r" (__ts7) \
+ : "r3", "t"); \
+ last = __last; \
+} while (0)
+
+/*
+ * On SMP systems, when the scheduler does migration-cost autodetection,
+ * it needs a way to flush as much of the CPU's caches as possible.
+ *
+ * TODO: fill this in!
+ */
+static inline void sched_cacheflush(void)
+{
+}
+
+#ifdef CONFIG_CPU_SH4A
+#define __icbi() \
+{ \
+ unsigned long __addr; \
+ __addr = 0xa8000000; \
+ __asm__ __volatile__( \
+ "icbi %0\n\t" \
+ : /* no output */ \
+ : "m" (__m(__addr))); \
+}
+#endif
+
+static inline unsigned long tas(volatile int *m)
+{
+ unsigned long retval;
+
+ __asm__ __volatile__ ("tas.b @%1\n\t"
+ "movt %0"
+ : "=r" (retval): "r" (m): "t", "memory");
+ return retval;
+}
+
+/*
+ * A brief note on ctrl_barrier(), the control register write barrier.
+ *
+ * Legacy SH cores typically require a sequence of 8 nops after
+ * modification of a control register in order for the changes to take
+ * effect. On newer cores (like the sh4a and sh5) this is accomplished
+ * with icbi.
+ *
+ * Also note that on sh4a in the icbi case we can forego a synco for the
+ * write barrier, as it's not necessary for control registers.
+ *
+ * Historically we have only done this type of barrier for the MMUCR, but
+ * it's also necessary for the CCR, so we make it generic here instead.
+ */
+#ifdef CONFIG_CPU_SH4A
+#define mb() __asm__ __volatile__ ("synco": : :"memory")
+#define rmb() mb()
+#define wmb() __asm__ __volatile__ ("synco": : :"memory")
+#define ctrl_barrier() __icbi()
+#define read_barrier_depends() do { } while(0)
+#else
+#define mb() __asm__ __volatile__ ("": : :"memory")
+#define rmb() mb()
+#define wmb() __asm__ __volatile__ ("": : :"memory")
+#define ctrl_barrier() __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
+#define read_barrier_depends() do { } while(0)
+#endif
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define smp_read_barrier_depends() read_barrier_depends()
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do { } while(0)
+#endif
+
+#define set_mb(var, value) do { xchg(&var, value); } while (0)
+
+/*
+ * Jump to P2 area.
+ * When handling TLB or caches, we need to do it from P2 area.
+ */
+#define jump_to_P2() \
+do { \
+ unsigned long __dummy; \
+ __asm__ __volatile__( \
+ "mov.l 1f, %0\n\t" \
+ "or %1, %0\n\t" \
+ "jmp @%0\n\t" \
+ " nop\n\t" \
+ ".balign 4\n" \
+ "1: .long 2f\n" \
+ "2:" \
+ : "=&r" (__dummy) \
+ : "r" (0x20000000)); \
+} while (0)
+
+/*
+ * Back to P1 area.
+ */
+#define back_to_P1() \
+do { \
+ unsigned long __dummy; \
+ ctrl_barrier(); \
+ __asm__ __volatile__( \
+ "mov.l 1f, %0\n\t" \
+ "jmp @%0\n\t" \
+ " nop\n\t" \
+ ".balign 4\n" \
+ "1: .long 2f\n" \
+ "2:" \
+ : "=&r" (__dummy)); \
+} while (0)
+
+static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
+{
+ unsigned long flags, retval;
+
+ local_irq_save(flags);
+ retval = *m;
+ *m = val;
+ local_irq_restore(flags);
+ return retval;
+}
+
+static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
+{
+ unsigned long flags, retval;
+
+ local_irq_save(flags);
+ retval = *m;
+ *m = val & 0xff;
+ local_irq_restore(flags);
+ return retval;
+}
+
+extern void __xchg_called_with_bad_pointer(void);
+
+#define __xchg(ptr, x, size) \
+({ \
+ unsigned long __xchg__res; \
+ volatile void *__xchg_ptr = (ptr); \
+ switch (size) { \
+ case 4: \
+ __xchg__res = xchg_u32(__xchg_ptr, x); \
+ break; \
+ case 1: \
+ __xchg__res = xchg_u8(__xchg_ptr, x); \
+ break; \
+ default: \
+ __xchg_called_with_bad_pointer(); \
+ __xchg__res = x; \
+ break; \
+ } \
+ \
+ __xchg__res; \
+})
+
+#define xchg(ptr,x) \
+ ((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr))))
+
+static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old,
+ unsigned long new)
+{
+ __u32 retval;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ retval = *m;
+ if (retval == old)
+ *m = new;
+ local_irq_restore(flags); /* implies memory barrier */
+ return retval;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg(). */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
+ unsigned long new, int size)
+{
+ switch (size) {
+ case 4:
+ return __cmpxchg_u32(ptr, old, new);
+ }
+ __cmpxchg_called_with_bad_pointer();
+ return old;
+}
+
+#define cmpxchg(ptr,o,n) \
+ ({ \
+ __typeof__(*(ptr)) _o_ = (o); \
+ __typeof__(*(ptr)) _n_ = (n); \
+ (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
+ (unsigned long)_n_, sizeof(*(ptr))); \
+ })
+
+extern void *set_exception_table_vec(unsigned int vec, void *handler);
+
+static inline void *set_exception_table_evt(unsigned int evt, void *handler)
+{
+ return set_exception_table_vec(evt >> 5, handler);
+}
+
+/* XXX
+ * disable hlt during certain critical i/o operations
+ */
+#define HAVE_DISABLE_HLT
+void disable_hlt(void);
+void enable_hlt(void);
+
+#define arch_align_stack(x) (x)
+
+#endif
diff --git a/include/asm-sh/types.h b/include/asm-sh/types.h
new file mode 100644
index 0000000..fd00dbb
--- /dev/null
+++ b/include/asm-sh/types.h
@@ -0,0 +1,59 @@
+#ifndef __ASM_SH_TYPES_H
+#define __ASM_SH_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+
+typedef __signed__ char s8;
+typedef unsigned char u8;
+
+typedef __signed__ short s16;
+typedef unsigned short u16;
+
+typedef __signed__ int s32;
+typedef unsigned int u32;
+
+typedef __signed__ long long s64;
+typedef unsigned long long u64;
+
+/* Dma addresses are 32-bits wide. */
+
+typedef u32 dma_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_TYPES_H */
diff --git a/include/asm-sh/u-boot.h b/include/asm-sh/u-boot.h
new file mode 100644
index 0000000..b79644c
--- /dev/null
+++ b/include/asm-sh/u-boot.h
@@ -0,0 +1,42 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************
+ * NOTE: This header file defines an interface to U-Boot. Including
+ * this (unmodified) header file in another file is considered normal
+ * use of U-Boot, and does *not* fall under the heading of "derived
+ * work".
+ ********************************************************************
+ */
+
+#ifndef __ASM_SH_U_BOOT_H_
+#define __ASM_SH_U_BOOT_H_
+
+typedef struct bd_info {
+ unsigned long bi_memstart; /* start of DRAM memory */
+ unsigned long bi_memsize; /* size of DRAM memory in bytes */
+ unsigned long bi_flashstart; /* start of FLASH memory */
+ unsigned long bi_flashsize; /* size of FLASH memory */
+ unsigned long bi_flashoffset; /* reserved area for startup monitor */
+ unsigned long bi_sramstart; /* start of SRAM memory */
+ unsigned long bi_sramsize; /* size of SRAM memory */
+ unsigned long bi_ip_addr; /* IP Address */
+ unsigned char bi_enetaddr[6]; /* Ethernet adress */
+ unsigned long bi_baudrate; /* Console Baudrate */
+ unsigned long bi_boot_params; /* where this board expects params */
+} bd_t;
+
+#endif
diff --git a/include/common.h b/include/common.h
index edd0024..493417f 100644
--- a/include/common.h
+++ b/include/common.h
@@ -129,20 +129,21 @@ typedef void (interrupt_handler_t)(void *);
/*
* enable common handling for all TQM8xxL/M boards:
- * - CONFIG_TQM8xxM will be defined for all TQM8xxM and TQM885D boards
+ * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
* - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
+ * and for the TQM885D board
*/
#if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
- defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) || \
- defined(CONFIG_TQM885D)
+ defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
# ifndef CONFIG_TQM8xxM
# define CONFIG_TQM8xxM
# endif
#endif
#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
- defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM)
+ defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
+ defined(CONFIG_TQM885D)
# ifndef CONFIG_TQM8xxL
# define CONFIG_TQM8xxL
# endif
@@ -497,6 +498,7 @@ ulong get_bus_freq (ulong);
#if defined(CONFIG_MPC85xx)
typedef MPC85xx_SYS_INFO sys_info_t;
void get_sys_info ( sys_info_t * );
+ulong get_ddr_freq (ulong);
#endif
#if defined(CONFIG_MPC86xx)
typedef MPC86xx_SYS_INFO sys_info_t;
diff --git a/include/configs/HMI10.h b/include/configs/HMI10.h
index 02ae5d0..f8b0262 100644
--- a/include/configs/HMI10.h
+++ b/include/configs/HMI10.h
@@ -224,11 +224,15 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index be603ac..35e1d63 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -298,13 +298,9 @@
#endif
/* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8540@0"
-#define OF_SOC "soc8540@e0000000"
-#define OF_TBCLK (bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH "/soc8540@e0000000/serial@4500"
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
#define CFG_64BIT_VSPRINTF 1
#define CFG_64BIT_STRTOUL 1
@@ -424,6 +420,7 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
+#define CONFIG_CMD_ELF
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
@@ -441,6 +438,7 @@
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 8dda665..d2e7237 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -309,14 +309,9 @@ extern unsigned long get_clock_freq(void);
#endif
/* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8541@0"
-#define OF_SOC "soc8541@e0000000"
-#define OF_TBCLK (bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH "/soc8541@e0000000/serial@4600"
-#define OF_PCI "pci@e0008000"
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/*
* I2C
@@ -422,6 +417,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
@@ -434,6 +430,7 @@ extern unsigned long get_clock_freq(void);
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 13e2a2c..545a76c 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -40,6 +40,7 @@
#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
@@ -251,13 +252,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#endif
/* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8544@0"
-#define OF_SOC "soc8544@e0000000"
-#define OF_TBCLK (bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH "/soc8544@e0000000/serial@4500"
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/* I2C */
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
@@ -410,6 +407,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
@@ -426,6 +424,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
@@ -475,10 +474,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_ETHADDR 00:E0:0C:02:00:FD
#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD
-#define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD
#endif
#define CONFIG_IPADDR 192.168.1.251
@@ -488,8 +483,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_BOOTFILE 8544ds/uImage.uboot
#define CONFIG_UBOOTPATH 8544ds/u-boot.bin /* TFTP server */
-#define CONFIG_SERVERIP 192.168.0.1
-#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP 192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.1
#define CONFIG_NETMASK 255.255.0.0
#define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
@@ -499,65 +494,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_BAUDRATE 115200
-#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3)
-#define PCIE_ENV \
- "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
- "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
- "pcieerr=md ${a}020 1; md ${a}e00 e;" \
- "pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
- "pci d.w $b.0 56 1;" \
- "pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \
- "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff;" \
- "pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff;" \
- "pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \
- "pci w $b.0 130 ffffffff\0" \
- "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \
- "pcie1regs=setenv a e000a; run pciereg\0" \
- "pcie2regs=setenv a e0009; run pciereg\0" \
- "pcie3regs=setenv a e000b; run pciereg\0" \
- "pcie1cfg=setenv b 3; run pciecfg\0" \
- "pcie2cfg=setenv b 5; run pciecfg\0" \
- "pcie3cfg=setenv b 0; run pciecfg\0" \
- "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \
- "pcie2err=setenv a e0009; setenv b 5; run pcieerr\0" \
- "pcie3err=setenv a e000b; setenv b 0; run pcieerr\0" \
- "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" \
- "pcie2errc=setenv a e0009; setenv b 5; run pcieerrc\0" \
- "pcie3errc=setenv a e000b; setenv b 0; run pcieerrc\0"
-#else
-#define PCIE_ENV ""
-#endif
-
-#if defined(CONFIG_PCI1)
-#define PCI_ENV \
- "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
- "echo e;md ${a}e00 9\0" \
- "pci1regs=setenv a e0008; run pcireg\0" \
- "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
- "pci d.w $b.0 56 1\0" \
- "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
- "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" \
- "pci1err=setenv a e0008; setenv b 7; run pcierr\0" \
- "pci1errc=setenv a e0008; setenv b 7; run pcierrc\0"
-#else
-#define PCI_ENV ""
-#endif
-
-#if defined(CONFIG_TSEC_ENET)
-#define ENET_ENV \
- "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \
- "md ${a}098 2\0" \
- "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \
- "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \
- "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \
- "echo mib;md ${a}680 31\0" \
- "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \
- "enet1regs=setenv a e0024; run enetreg\0" \
- "enet3regs=setenv a e0026; run enetreg\0"
-#else
-#define ENET_ENV ""
-#endif
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
@@ -570,29 +506,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
"ramdiskfile=8544ds/ramdisk.uboot\0" \
- "dtbaddr=c00000\0" \
- "dtbfile=8544ds/mpc8544ds.dtb\0" \
- "bdev=sda3\0" \
- "eoi=mw e00400b0 0\0" \
- "iack=md e00400a0 1\0" \
- "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
- "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
- "ddrregs=setenv a e0002; run ddrreg\0" \
- "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
- "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \
- "guregs=setenv a e00e0; run gureg\0" \
- "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
- "ecmregs=setenv a e0001; run ecmreg\0" \
- "lawregs=md e0000c08 4b\0" \
- "lbcregs=md e0005000 36\0" \
- "dma0regs=md e0021100 12\0" \
- "dma1regs=md e0021180 12\0" \
- "dma2regs=md e0021200 12\0" \
- "dma3regs=md e0021280 12\0" \
- PCIE_ENV \
- PCI_ENV \
- ENET_ENV
-
+ "fdtaddr=c00000\0" \
+ "fdtfile=8544ds/mpc8544ds.dtb\0" \
+ "bdev=sda3\0"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs root=/dev/nfs rw " \
@@ -600,23 +516,22 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
- "tftp $dtbaddr $dtbfile;" \
- "bootm $loadaddr - $dtbaddr"
-
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
#define CONFIG_RAMBOOTCOMMAND \
"setenv bootargs root=/dev/ram rw " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $ramdiskaddr $ramdiskfile;" \
"tftp $loadaddr $bootfile;" \
- "tftp $dtbaddr $dtbfile;" \
- "bootm $loadaddr $ramdiskaddr $dtbaddr"
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
#define CONFIG_BOOTCOMMAND \
"setenv bootargs root=/dev/$bdev rw " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
- "tftp $dtbaddr $dtbfile;" \
- "bootm $loadaddr - $dtbaddr"
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 4edc7fd..3f382e5 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -42,6 +42,7 @@
#undef CONFIG_RIO
#undef CONFIG_PCI2
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
@@ -333,14 +334,9 @@ extern unsigned long get_clock_freq(void);
#endif
/* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8548@0"
-#define OF_SOC "soc8548@e0000000"
-#define OF_TBCLK (bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH "/soc8548@e0000000/serial@4600"
-#define OF_PCI "pci@e0008000"
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/*
* I2C
@@ -483,6 +479,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
@@ -495,6 +492,7 @@ extern unsigned long get_clock_freq(void);
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
@@ -568,72 +566,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_BAUDRATE 115200
-#if defined(CONFIG_PCIE1)
-#define PCIE_ENV \
- "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
- "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
- "pcieerr=md ${a}020 1; md ${a}e00 e; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
- "pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;" \
- "pci d $b.0 130 1\0" \
- "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;" \
- "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;"\
- "pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0" \
- "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \
- "pcie1regs=setenv a e000a; run pciereg\0" \
- "pcie1cfg=setenv b 3; run pciecfg\0" \
- "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \
- "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0"
-#else
-#define PCIE_ENV ""
-#endif
-
-#if defined(CONFIG_PCI1) || defined(CONFIG_PCI2)
-#define PCI_ENV \
- "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
- "echo e;md ${a}e00 9\0" \
- "pcierr=md ${a}e00 8; pci d.b $b.0 7 1;pci d.w $b.0 1e 1;" \
- "pci d.w $b.0 56 1\0" \
- "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
- "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0"
-#else
-#define PCI_ENV ""
-#endif
-
-#if defined(CONFIG_PCI1)
-#define PCI_ENV1 \
- "pci1regs=setenv a e0008; run pcireg\0" \
- "pci1err=setenv a e0008; setenv b 0; run pcierr\0" \
- "pci1errc=setenv a e0008; setenv b 0; run pcierrc\0"
-#else
-#define PCI_ENV1 ""
-#endif
-
-#if defined(CONFIG_PCI2)
-#define PCI_ENV2 \
- "pci2regs=setenv a e0009; run pcireg\0" \
- "pci2err=setenv a e0009; setenv b 123; run pcierr\0" \
- "pci2errc=setenv a e0009; setenv b 123; run pcierrc\0"
-#else
-#define PCI_ENV2 ""
-#endif
-
-#if defined(CONFIG_TSEC_ENET)
-#define ENET_ENV \
- "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \
- "md ${a}098 2\0" \
- "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \
- "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \
- "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \
- "echo mib;md ${a}680 31\0" \
- "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \
- "enet1regs=setenv a e0024; run enetreg\0" \
- "enet2regs=setenv a e0025; run enetreg\0" \
- "enet3regs=setenv a e0026; run enetreg\0" \
- "enet4regs=setenv a e0027; run enetreg\0"
-#else
-#define ENET_ENV ""
-#endif
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
@@ -647,28 +579,7 @@ extern unsigned long get_clock_freq(void);
"ramdiskaddr=2000000\0" \
"ramdiskfile=ramdisk.uboot\0" \
"fdtaddr=c00000\0" \
- "fdtfile=mpc8548cds.dtb\0" \
- "eoi=mw e00400b0 0\0" \
- "iack=md e00400a0 1\0" \
- "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
- "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
- "ddrregs=setenv a e0002; run ddrreg\0" \
- "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
- "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \
- "guregs=setenv a e00e0; run gureg\0" \
- "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
- "ecmregs=setenv a e0001; run ecmreg\0" \
- "lawregs=md e0000c08 4b\0" \
- "lbcregs=md e0005000 36\0" \
- "dma0regs=md e0021100 12\0" \
- "dma1regs=md e0021180 12\0" \
- "dma2regs=md e0021200 12\0" \
- "dma3regs=md e0021280 12\0" \
- PCIE_ENV \
- PCI_ENV \
- PCI_ENV1 \
- PCI_ENV2 \
- ENET_ENV
+ "fdtfile=mpc8548cds.dtb\0"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs root=/dev/nfs rw " \
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index c414bf0..90ef3d6 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -309,14 +309,9 @@ extern unsigned long get_clock_freq(void);
#endif
/* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8555@0"
-#define OF_SOC "soc8555@e0000000"
-#define OF_TBCLK (bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH "/soc8555@e0000000/serial@4600"
-#define OF_PCI "pci@e0008000"
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/*
* I2C
@@ -422,6 +417,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
@@ -434,6 +430,7 @@ extern unsigned long get_clock_freq(void);
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index a8f362f..d4e0de0 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -289,13 +289,9 @@
#endif
/* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8560@0"
-#define OF_SOC "soc8560@e0000000"
-#define OF_TBCLK (bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH "/soc8560@e0000000/serial@4500"
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/*
* I2C
@@ -450,6 +446,7 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
+#define CONFIG_CMD_ELF
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
@@ -471,6 +468,7 @@
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x1000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
@@ -525,6 +523,8 @@
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
#endif
#define CONFIG_IPADDR 192.168.1.253
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index b9366cc..59f490e 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -33,7 +33,11 @@
#define CONFIG_MPC8568 1 /* MPC8568 specific */
#define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */
-#define CONFIG_PCI
+#define CONFIG_PCI 1 /* Enable PCI/PCIE */
+#define CONFIG_PCI1 1 /* PCI controller */
+#define CONFIG_PCIE1 1 /* PCIE controller */
+#define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */
+#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_QE /* Enable QE */
#define CONFIG_ENV_OVERWRITE
@@ -87,6 +91,9 @@ extern unsigned long get_clock_freq(void);
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
+#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000)
+
/*
* DDR Setup
*/
@@ -290,14 +297,9 @@ extern unsigned long get_clock_freq(void);
#endif
/* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8568@0"
-#define OF_SOC "soc8568@e0000000"
-#define OF_QE "qe@e0080000"
-#define OF_TBCLK (bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4500"
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/*
* I2C
@@ -325,12 +327,12 @@ extern unsigned long get_clock_freq(void);
#define CFG_PCI1_IO_PHYS 0xe2000000
#define CFG_PCI1_IO_SIZE 0x00800000 /* 8M */
-#define CFG_PEX_MEM_BASE 0xa0000000
-#define CFG_PEX_MEM_PHYS CFG_PEX_MEM_BASE
-#define CFG_PEX_MEM_SIZE 0x10000000 /* 256M */
-#define CFG_PEX_IO_BASE 0x00000000
-#define CFG_PEX_IO_PHYS 0xe2800000
-#define CFG_PEX_IO_SIZE 0x00800000 /* 8M */
+#define CFG_PCIE1_MEM_BASE 0xa0000000
+#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCIE1_IO_BASE 0x00000000
+#define CFG_PCIE1_IO_PHYS 0xe2800000
+#define CFG_PCIE1_IO_SIZE 0x00800000 /* 8M */
#define CFG_SRIO_MEM_BASE 0xc0000000
@@ -383,6 +385,11 @@ extern unsigned long get_clock_freq(void);
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x80000000
+
#endif /* CONFIG_PCI */
#ifndef CONFIG_NET_MULTI
@@ -440,6 +447,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
@@ -452,6 +460,7 @@ extern unsigned long get_clock_freq(void);
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 1c6a9ae..ae8d9ab 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -335,7 +335,7 @@
#else
#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
#endif /* CONFIG_TQM5200_B */
-#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */
+#define CFG_MALLOC_LEN (1024 << 10) /* Reserve 1024 kB for malloc() */
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
@@ -392,6 +392,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 7a38010..be5b4d3 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -192,11 +192,15 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index e8b6a80..a0c01b6 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -188,15 +188,19 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
-#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment */
#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index beeca63..f51b12e 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -179,11 +179,15 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index d5609c1..a725e71 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -177,15 +177,19 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
-#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment */
#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index e35b5b2..16dc3eb 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -183,11 +183,15 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index cd5212e..c4b4599 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -217,15 +217,19 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
-#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment */
#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index d5838db..ac22c1e 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -186,11 +186,15 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index fe3a2f0..8601de1 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -189,11 +189,14 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
@@ -368,7 +371,7 @@
*/
#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
-#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
+#define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB per bank */
/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
#define CFG_OR_TIMING_SDRAM 0x00000A00
@@ -444,7 +447,10 @@
#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
+/* 10 column SDRAM */
+#define CFG_MAMR_10COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9 | \
+ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
/*
* Internal Definitions
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index f09d3d1..2bf4a2a 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -186,14 +186,17 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
-
#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index 039aa3a..d42ffc9 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -186,16 +186,19 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
-
#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
-#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment */
#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index ca3c166..d7e5eeb 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -232,11 +232,14 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index f36b729..8a3aa4b 100644
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -42,17 +42,10 @@
#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz - PLL input clock */
#define CFG_8xx_CPUCLK_MIN 15000000 /* 15 MHz - CPU minimum clock */
#define CFG_8xx_CPUCLK_MAX 133000000 /* 133 MHz - CPU maximum clock */
-#define CONFIG_8xx_CPUCLK_DEFAULT 66000000 /* 50 MHz - CPU default clock */
+#define CONFIG_8xx_CPUCLK_DEFAULT 66000000 /* 66 MHz - CPU default clock */
/* (it will be used if there is no */
/* 'cpuclk' variable with valid value) */
-#define CFG_MEASURE_CPUCLK /* Measure real cpu clock */
- /* (function measure_gclk() */
- /* will be called) */
-#ifdef CFG_MEASURE_CPUCLK
-#define CFG_8XX_XIN 10000000 /* measure_gclk() needs this */
-#endif
-
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
@@ -83,9 +76,15 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM866M/uImage\0" \
- "kernel_addr=40080000\0" \
- "ramdisk_addr=40180000\0" \
+ "bootfile=/tftpboot/TQM885D/uImage\0" \
+ "fdt_addr=400C0000\0" \
+ "kernel_addr=40100000\0" \
+ "ramdisk_addr=40280000\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=protect off 40000000 +${filesize};" \
+ "erase 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "protect on 40000000 +${filesize}\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -144,7 +143,7 @@
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-#undef CONFIG_RTC_MPC8xx /* MPC866 does not support RTC */
+#undef CONFIG_RTC_MPC8xx /* MPC885 does not support RTC */
#define CONFIG_TIMESTAMP /* but print image timestmps */
@@ -230,7 +229,7 @@
#define CFG_FLASH_BASE 0x40000000
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_MALLOC_LEN (256 << 10) /* Reserve 128 kB for malloc() */
/*
* For booting Linux, the board info and command line data
@@ -242,16 +241,20 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
-#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment */
+#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
@@ -434,26 +437,30 @@
#define CFG_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64))
/*
- * Memory Periodic Timer Prescaler
- * Periodic timer for refresh, start with refresh rate for 40 MHz clock
- * (CFG_8xx_CPUCLK_MIN / CFG_PTA_PER_CLK)
+ * Periodic timer (MAMR[PTx]) for 4 * 7.8 us refresh (= 31.2 us per quad)
+ *
+ * CPUclock(MHz) * 31.2
+ * CFG_MAMR_PTA = ----------------------------------- with DFBRG = 0
+ * 2^(2*SCCR[DFBRG]) * MPTPR_PTP_DIV16
+ *
+ * CPU clock = 15 MHz: CFG_MAMR_PTA = 29 -> 4 * 7.73 us
+ * CPU clock = 50 MHz: CFG_MAMR_PTA = 97 -> 4 * 7.76 us
+ * CPU clock = 66 MHz: CFG_MAMR_PTA = 128 -> 4 * 7.75 us
+ * CPU clock = 133 MHz: CFG_MAMR_PTA = 255 -> 4 * 7.67 us
+ *
+ * Value 97 is for 4 * 7.8 us at 50 MHz. So the refresh cycle requirement will
+ * be met also in the default configuration, i.e. if environment variable
+ * 'cpuclk' is not set.
*/
-#define CFG_MAMR_PTA 39
+#define CFG_MAMR_PTA 128
/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
- * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
+ * Memory Periodic Timer Prescaler Register (MPTPR) values.
*/
-#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
+/* 4 * 7.8 us refresh (= 31.2 us per quad) at 50 MHz and PTA = 97 */
+#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16
+/* 4 * 3.9 us refresh (= 15.6 us per quad) at 50 MHz and PTA = 97 */
+#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8
/*
* MAMR settings for SDRAM
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
new file mode 100644
index 0000000..194788b
--- /dev/null
+++ b/include/configs/atstk1003.h
@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Configuration settings for the ATSTK1003 CPU daughterboard
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_AVR32 1
+#define CONFIG_AT32AP 1
+#define CONFIG_AT32AP7001 1
+#define CONFIG_ATSTK1003 1
+#define CONFIG_ATSTK1000 1
+
+#define CONFIG_ATSTK1000_EXT_FLASH 1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ 1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ */
+#define CONFIG_PLL 1
+#define CFG_POWER_MANAGER 1
+#define CFG_OSC0_HZ 20000000
+#define CFG_PLL0_DIV 1
+#define CFG_PLL0_MUL 7
+#define CFG_PLL0_SUPPRESS_CYCLES 16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
+#define CFG_CLKDIV_CPU 0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
+#define CFG_CLKDIV_HSB 1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
+#define CFG_CLKDIV_PBA 2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
+#define CFG_CLKDIV_PBB 1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ * icp = PLLOPT<2>
+ * ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT 0x04
+
+#undef CONFIG_USART0
+#define CONFIG_USART1 1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION 1
+
+#define CONFIG_CMDLINE_TAG 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_STACKSIZE (2048)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTARGS \
+ "console=ttyS0 root=/dev/mmcblk0p1 rootwait"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmcinit; ext2load mmc 0:1 0x10400000 /boot/uImage; bootm"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_AUTOBOOT 1
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_ATMEL_USART 1
+#define CONFIG_PIO2 1
+#define CFG_HSDRAMC 1
+#define CONFIG_MMC 1
+
+#define CFG_DCACHE_LINESZ 32
+#define CFG_ICACHE_LINESZ 32
+
+#define CONFIG_NR_DRAM_BANKS 1
+
+/* External flash on STK1000 */
+#if 0
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+#endif
+
+#define CFG_FLASH_BASE 0x00000000
+#define CFG_FLASH_SIZE 0x800000
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 135
+
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE 0x24000000
+#define CFG_INTRAM_SIZE 0x8000
+
+#define CFG_SDRAM_BASE 0x10000000
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 65536
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN (256*1024)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
+#define CFG_BOOTPARAMS_LEN (16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT "Uboot> "
+#define CFG_CBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP 1
+
+#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000)
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
new file mode 100644
index 0000000..1bad171
--- /dev/null
+++ b/include/configs/atstk1004.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Configuration settings for the ATSTK1003 CPU daughterboard
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_AVR32 1
+#define CONFIG_AT32AP 1
+#define CONFIG_AT32AP7002 1
+#define CONFIG_ATSTK1004 1
+#define CONFIG_ATSTK1000 1
+
+#define CONFIG_ATSTK1000_EXT_FLASH 1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ 1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ */
+#define CONFIG_PLL 1
+#define CFG_POWER_MANAGER 1
+#define CFG_OSC0_HZ 20000000
+#define CFG_PLL0_DIV 1
+#define CFG_PLL0_MUL 7
+#define CFG_PLL0_SUPPRESS_CYCLES 16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
+#define CFG_CLKDIV_CPU 0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
+#define CFG_CLKDIV_HSB 1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
+#define CFG_CLKDIV_PBA 2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
+#define CFG_CLKDIV_PBB 1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ * icp = PLLOPT<2>
+ * ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT 0x04
+
+#undef CONFIG_USART0
+#define CONFIG_USART1 1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION 1
+
+#define CONFIG_CMDLINE_TAG 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_STACKSIZE (2048)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTARGS \
+ "console=ttyS0 root=/dev/mmcblk0p1 rootwait"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmcinit; ext2load mmc 0:1 0x10200000 /boot/uImage; bootm"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_AUTOBOOT 1
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_ATMEL_USART 1
+#define CONFIG_PIO2 1
+#define CFG_HSDRAMC 1
+#define CONFIG_MMC 1
+
+#define CFG_DCACHE_LINESZ 32
+#define CFG_ICACHE_LINESZ 32
+
+#define CONFIG_NR_DRAM_BANKS 1
+
+/* External flash on STK1000 */
+#if 0
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+#endif
+
+#define CFG_FLASH_BASE 0x00000000
+#define CFG_FLASH_SIZE 0x800000
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 135
+
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE 0x24000000
+#define CFG_INTRAM_SIZE 0x8000
+
+#define CFG_SDRAM_BASE 0x10000000
+#define CFG_SDRAM_16BIT 1
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 65536
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN (256*1024)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000)
+#define CFG_BOOTPARAMS_LEN (16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT "Uboot> "
+#define CFG_CBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP 1
+
+#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000)
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
new file mode 100644
index 0000000..ae0d018
--- /dev/null
+++ b/include/configs/ms7722se.h
@@ -0,0 +1,136 @@
+/*
+ * Configuation settings for the Hitachi Solution Engine 7722
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MS7722SE_H
+#define __MS7722SE_H
+
+#undef DEBUG
+#define CONFIG_SH 1
+#define CONFIG_SH4 1
+#define CONFIG_CPU_SH7722 1
+#define CONFIG_MS7722SE 1
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_ENV
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.0.22
+#define CONFIG_SERVERIP 192.168.0.1
+#define CONFIG_GATEWAYIP 192.168.0.1
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+/* SMC9111 */
+#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111_BASE (0xB8000000)
+
+/* MEMORY */
+#define MS7722SE_SDRAM_BASE (0x8C000000)
+#define MS7722SE_FLASH_BASE_1 (0xA0000000)
+#define MS7722SE_FLASH_BANK_SIZE (8*1024 * 1024)
+
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Buffer size for input from the Console */
+#define CFG_PBSIZE 256 /* Buffer size for Console output */
+#define CFG_MAXARGS 16 /* max args accepted for monitor commands */
+#define CFG_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */
+#define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */
+
+/* SCIF */
+#define CFG_SCIF_CONSOLE 1
+#define CONFIG_CONS_SCIF0 1
+#undef CFG_CONSOLE_INFO_QUIET /* Suppress display of console information at boot */
+#undef CFG_CONSOLE_OVERWRITE_ROUTINE
+#undef CFG_CONSOLE_ENV_OVERWRITE
+
+#define CFG_MEMTEST_START (MS7722SE_SDRAM_BASE)
+#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024))
+
+#undef CFG_ALT_MEMTEST /* Enable alternate, more extensive, memory test */
+#undef CFG_MEMTEST_SCRATCH /* Scratch address used by the alternate memory test */
+
+#undef CFG_LOADS_BAUD_CHANGE /* Enable temporary baudrate change while serial download */
+
+#define CFG_SDRAM_BASE (MS7722SE_SDRAM_BASE)
+#define CFG_SDRAM_SIZE (64 * 1024 * 1024) /* maybe more, but if so u-boot doesn't know about it... */
+
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) /* default load address for scripts ?!? */
+
+#define CFG_MONITOR_BASE (MS7722SE_FLASH_BASE_1) /* Address of u-boot image
+ in Flash (NOT run time address in SDRAM) ?!? */
+#define CFG_MONITOR_LEN (128 * 1024) /* */
+#define CFG_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */
+#define CFG_GBL_DATA_SIZE (256) /* size in bytes reserved for initial data */
+#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
+
+/* FLASH */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#undef CFG_FLASH_QUIET_TEST
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#define CFG_FLASH_BASE (MS7722SE_FLASH_BASE_1) /* Physical start address of Flash memory */
+
+#define CFG_MAX_FLASH_SECT 150 /* Max number of sectors on each
+ Flash chip */
+
+/* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */
+#define CFG_MAX_FLASH_BANKS 2
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \
+ CFG_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \
+ }
+
+#define CFG_FLASH_ERASE_TOUT (3 * 1000) /* Timeout for Flash erase operations (in ms) */
+#define CFG_FLASH_WRITE_TOUT (3 * 1000) /* Timeout for Flash write operations (in ms) */
+#define CFG_FLASH_LOCK_TOUT (3 * 1000) /* Timeout for Flash set sector lock bit operations (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT (3 * 1000) /* Timeout for Flash clear lock bit operations (in ms) */
+
+#undef CFG_FLASH_PROTECTION /* Use hardware flash sectors protection instead of U-Boot software protection */
+
+#undef CFG_DIRECT_FLASH_TFTP
+
+#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE 1
+#define CFG_ENV_SECT_SIZE (8 * 1024)
+#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + (1 * CFG_ENV_SECT_SIZE))
+#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) /* Offset of env Flash sector relative to CFG_FLASH_BASE */
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR_REDUND (CFG_FLASH_BASE + (2 * CFG_ENV_SECT_SIZE))
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ 33333333
+#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */
+#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+
+#endif /* __MS7722SE_H */
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
new file mode 100644
index 0000000..3668156
--- /dev/null
+++ b/include/configs/ms7750se.h
@@ -0,0 +1,108 @@
+/*
+ * Configuation settings for the Hitachi Solution Engine 7750
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MS7750SE_H
+#define __MS7750SE_H
+
+#undef DEBUG
+#define CONFIG_SH 1
+#define CONFIG_SH4 1
+#define CONFIG_CPU_SH7750 1
+/* #define CONFIG_CPU_SH7751 1 */
+/* #define CONFIG_CPU_TYPE_R 1 */
+#define CONFIG_MS7750SE 1
+#define __LITTLE_ENDIAN__ 1
+
+/*
+ * Command line configuration.
+ */
+/*#include <config_cmd_default.h>*/
+
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_ENV
+
+#define CFG_SCIF_CONSOLE 1
+#define CONFIG_BAUDRATE 38400
+#define CONFIG_CONS_SCIF1 1
+#define BOARD_LATE_INIT 1
+
+#define CONFIG_BOOTDELAY -1
+#define CONFIG_BOOTARGS "console=ttySC0,38400"
+#define CONFIG_ENV_OVERWRITE 1
+
+/* SDRAM */
+#define CFG_SDRAM_BASE (0x8C000000)
+#define CFG_SDRAM_SIZE (64 * 1024 * 1024)
+
+#define CFG_LONGHELP
+#define CFG_PROMPT "=> "
+#define CFG_CBSIZE 256
+#define CFG_PBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_BARGSIZE 512
+/* List of legal baudrate settings for this board */
+#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
+
+#define CFG_MEMTEST_START (CFG_SDRAM_BASE)
+#define CFG_MEMTEST_END (TEXT_BASE - 0x100000)
+
+/* NOR Flash */
+/* #define CFG_FLASH_BASE (0xA1000000)*/
+#define CFG_FLASH_BASE (0xA0000000)
+#define CFG_MAX_FLASH_BANKS (1) /* Max number of
+ * Flash memory banks
+ */
+#define CFG_MAX_FLASH_SECT 142
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024)
+#define CFG_MONITOR_BASE (CFG_FLASH_BASE) /* Address of u-boot image in Flash */
+#define CFG_MONITOR_LEN (128 * 1024)
+#define CFG_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */
+
+#define CFG_GBL_DATA_SIZE (256) /* size in bytes reserved for initial data */
+#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
+#define CFG_RX_ETH_BUFFER (8)
+
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#undef CFG_FLASH_CFI_BROKEN_TABLE
+#undef CFG_FLASH_QUIET_TEST
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_FLASH_ERASE_TOUT 120000
+#define CFG_FLASH_WRITE_TOUT 500
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ 33333333
+#define TMU_CLK_DIVIDER 4
+#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+
+#endif /* __MS7750SE_H */
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index edae6f4..827a28f 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -193,11 +193,15 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
diff --git a/include/e500.h b/include/e500.h
index 8e3bf8c..0d73260 100644
--- a/include/e500.h
+++ b/include/e500.h
@@ -12,6 +12,7 @@ typedef struct
{
unsigned long freqProcessor;
unsigned long freqSystemBus;
+ unsigned long freqDDRBus;
} MPC85xx_SYS_INFO;
#endif /* _ASMLANGUAGE */
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 8f781d4..3d6c1a8 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -44,6 +44,7 @@ void do_fixup_by_compat(void *fdt, const char *compat,
const char *prop, const void *val, int len, int create);
void do_fixup_by_compat_u32(void *fdt, const char *compat,
const char *prop, u32 val, int create);
+int fdt_fixup_memory(void *blob, u64 start, u64 size);
void fdt_fixup_ethernet(void *fdt, bd_t *bd);
#ifdef CONFIG_OF_HAS_UBOOT_ENV
diff --git a/include/flash.h b/include/flash.h
index b0bf733..2ed1e20 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -52,6 +52,9 @@ typedef struct {
ushort ext_addr; /* extended query table address */
ushort cfi_version; /* cfi version */
ushort cfi_offset; /* offset for cfi query */
+ ulong addr_unlock1; /* unlock address 1 for AMD flash roms */
+ ulong addr_unlock2; /* unlock address 2 for AMD flash roms */
+ const char *name; /* human-readable name */
#endif
} flash_info_t;
@@ -77,6 +80,7 @@ typedef struct {
#define FLASH_CFI_X8 0x00
#define FLASH_CFI_X16 0x01
#define FLASH_CFI_X8X16 0x02
+#define FLASH_CFI_X16X32 0x05
/* convert between bit value and numeric value */
#define CFI_FLASH_SHIFT_WIDTH 3
@@ -101,6 +105,13 @@ extern void flash_read_user_serial(flash_info_t * info, void * buffer, int offse
extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int offset, int len);
#endif /* CFG_FLASH_PROTECTION */
+#ifdef CONFIG_FLASH_CFI_LEGACY
+extern ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info);
+extern int jedec_flash_match(flash_info_t *info, ulong base);
+#define CFI_CMDSET_AMD_LEGACY 0xFFF0
+#endif
+
+
/*-----------------------------------------------------------------------
* return codes from flash_write():
*/
diff --git a/include/ioports.h b/include/ioports.h
index cfba667..1134ea5 100644
--- a/include/ioports.h
+++ b/include/ioports.h
@@ -26,7 +26,7 @@ typedef struct {
* a 0x20 byte boundary
*/
#ifdef CONFIG_MPC85xx
-#define ioport_addr(im, idx) (ioport_t *)((uint)&((im)->im_cpm.im_cpm_iop) + ((idx)*0x20))
+#define ioport_addr(im, idx) (ioport_t *)((uint)&(im->im_cpm_iop) + ((idx)*0x20))
#else
#define ioport_addr(im, idx) (ioport_t *)((uint)&(im)->im_ioport + ((idx)*0x20))
#endif
diff --git a/lib_avr32/board.c b/lib_avr32/board.c
index 11d864f..809ee3b 100644
--- a/lib_avr32/board.c
+++ b/lib_avr32/board.c
@@ -311,6 +311,8 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
dma_alloc_init();
board_init_info();
+ enable_interrupts();
+
bd->bi_flashstart = 0;
bd->bi_flashsize = 0;
bd->bi_flashoffset = 0;
diff --git a/lib_avr32/interrupts.c b/lib_avr32/interrupts.c
index ce538f3..28df20d 100644
--- a/lib_avr32/interrupts.c
+++ b/lib_avr32/interrupts.c
@@ -35,5 +35,5 @@ int disable_interrupts(void)
sr = sysreg_read(SR);
asm volatile("ssrf %0" : : "n"(SYSREG_GM_OFFSET));
- return SYSREG_BFEXT(GM, sr);
+ return !SYSREG_BFEXT(GM, sr);
}
diff --git a/lib_sh/Makefile b/lib_sh/Makefile
new file mode 100644
index 0000000..cf127a8
--- /dev/null
+++ b/lib_sh/Makefile
@@ -0,0 +1,42 @@
+#
+# Copyright (c) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(ARCH).a
+
+SOBJS =
+
+COBJS = board.o sh_linux.o # time.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/lib_sh/board.c b/lib_sh/board.c
new file mode 100644
index 0000000..2cd60d7
--- /dev/null
+++ b/lib_sh/board.c
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <devices.h>
+#include <version.h>
+#include <net.h>
+#include <environment.h>
+
+extern void malloc_bin_reloc (void);
+extern int cpu_init(void);
+extern int board_init(void);
+extern int dram_init(void);
+extern int watchdog_init(void);
+extern int timer_init(void);
+
+const char version_string[] = U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
+
+unsigned long monitor_flash_len = CFG_MONITOR_LEN;
+
+static unsigned long mem_malloc_start;
+static unsigned long mem_malloc_end;
+static unsigned long mem_malloc_brk;
+
+static void mem_malloc_init (void)
+{
+
+ mem_malloc_start = (TEXT_BASE - CFG_GBL_DATA_SIZE - CFG_MALLOC_LEN);
+ mem_malloc_end = (mem_malloc_start + CFG_MALLOC_LEN - 16);
+ mem_malloc_brk = mem_malloc_start;
+ memset ((void *) mem_malloc_start, 0,
+ (mem_malloc_end - mem_malloc_start));
+}
+
+void *sbrk (ptrdiff_t increment)
+{
+ unsigned long old = mem_malloc_brk;
+ unsigned long new = old + increment;
+
+ if ((new < mem_malloc_start) ||
+ (new > mem_malloc_end)) {
+ return NULL;
+ }
+
+ mem_malloc_brk = new;
+ return (void *) old;
+}
+
+static int sh_flash_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_flashsize = flash_init();
+ printf("FLASH: %dMB\n", gd->bd->bi_flashsize / (1024*1024));
+
+ return 0;
+}
+
+#if defined(CONFIG_CMD_NAND)
+void nand_init (void);
+static int sh_nand_init(void)
+{
+ printf("NAND: ");
+ nand_init(); /* go init the NAND */
+ return 0;
+}
+#endif /* CONFIG_CMD_NAND */
+
+#if defined(CONFIG_CMD_IDE)
+#include <ide.h>
+static int sh_marubun_init(void)
+{
+ puts ("IDE: ");
+ ide_init();
+ return 0;
+}
+#endif /* (CONFIG_CMD_IDE) */
+
+static int sh_mem_env_init(void)
+{
+ mem_malloc_init();
+ malloc_bin_reloc();
+ env_relocate();
+ jumptable_init();
+ return 0;
+}
+
+static int sh_net_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ char *s, *e;
+ int i;
+
+ gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr");
+ s = getenv("ethaddr");
+ for (i = 0; i < 6; ++i) {
+ gd->bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0;
+ if (s) s = (*e) ? e + 1 : e;
+ }
+
+ return 0;
+}
+
+typedef int (init_fnc_t) (void);
+
+init_fnc_t *init_sequence[] =
+{
+ cpu_init, /* basic cpu dependent setup */
+ board_init, /* basic board dependent setup */
+ interrupt_init, /* set up exceptions */
+ env_init, /* event init */
+ serial_init, /* SCIF init */
+ watchdog_init, /* watchdog init */
+ console_init_f,
+ display_options,
+ checkcpu,
+ checkboard, /* Check support board */
+ dram_init, /* SDRAM init */
+ timer_init, /* SuperH Timer (TCNT0 only) init */
+ sh_flash_init, /* Flash memory(NOR) init*/
+ sh_mem_env_init,
+#if defined(CONFIG_CMD_NAND)
+ sh_nand_init, /* Flash memory (NAND) init */
+#endif
+ devices_init,
+ console_init_r,
+ interrupt_init,
+#ifdef BOARD_LATE_INIT
+ board_late_init,
+#endif
+#if defined(CONFIG_CMD_NET)
+ sh_net_init, /* SH specific eth init */
+#endif
+ NULL /* Terminate this list */
+};
+
+void sh_generic_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ bd_t *bd;
+ init_fnc_t **init_fnc_ptr;
+ char *s;
+ int i;
+
+ memset (gd, 0, CFG_GBL_DATA_SIZE);
+
+ gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
+
+ gd->bd = (bd_t *) (gd + 1); /* At end of global data */
+ gd->baudrate = CONFIG_BAUDRATE;
+
+ gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
+
+ bd = gd->bd;
+ bd->bi_memstart = CFG_SDRAM_BASE;
+ bd->bi_memsize = CFG_SDRAM_SIZE;
+ bd->bi_flashstart = CFG_FLASH_BASE;
+#if defined(CFG_SRAM_BASE) && defined(CFG_SRAM_SIZE)
+ bd->bi_sramstart= CFG_SRAM_BASE;
+ bd->bi_sramsize = CFG_SRAM_SIZE;
+#endif
+ bd->bi_baudrate = CONFIG_BAUDRATE;
+
+ for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr , i++) {
+ if ((*init_fnc_ptr) () != 0) {
+ hang();
+ }
+ }
+
+#if defined(CONFIG_CMD_NET)
+ puts ("Net: ");
+ eth_initialize(gd->bd);
+
+ if ((s = getenv ("bootfile")) != NULL) {
+ copy_filename (BootFile, s, sizeof (BootFile));
+ }
+#endif /* CONFIG_CMD_NET */
+
+ while (1) {
+ main_loop();
+ }
+}
+
+/***********************************************************************/
+
+void hang (void)
+{
+ puts ("Board ERROR\n");
+ for (;;);
+}
diff --git a/lib_sh/sh_linux.c b/lib_sh/sh_linux.c
new file mode 100644
index 0000000..14b6815
--- /dev/null
+++ b/lib_sh/sh_linux.c
@@ -0,0 +1,74 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/byteorder.h>
+
+extern image_header_t header; /* common/cmd_bootm.c */
+
+/* The SH kernel reads arguments from the empty zero page at location
+ * 0 at the start of SDRAM. The following are copied from
+ * arch/sh/kernel/setup.c and may require tweaking if the kernel sources
+ * change.
+ */
+#define PARAM ((unsigned char *)CFG_SDRAM_BASE + 0x1000)
+
+#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
+#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
+#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
+#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
+#define INITRD_START (*(unsigned long *) (PARAM+0x010))
+#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
+/* ... */
+#define COMMAND_LINE ((char *) (PARAM+0x100))
+
+#define RAMDISK_IMAGE_START_MASK 0x07FF
+
+#ifdef CFG_DEBUG
+static void hexdump (unsigned char *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if ((i % 16) == 0)
+ printf ("%s%08x: ", i ? "\n" : "", (unsigned int) &buf[i]);
+ printf ("%02x ", buf[i]);
+ }
+ printf ("\n");
+}
+#endif
+
+void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
+ ulong addr, ulong *len_ptr, int verify)
+{
+ image_header_t *hdr = &header;
+ char *bootargs = getenv("bootargs");
+ void (*kernel) (void) = (void (*)(void)) ntohl (hdr->ih_ep);
+
+ /* Setup parameters */
+ memset(PARAM, 0, 0x1000); /* Clear zero page */
+ strcpy(COMMAND_LINE, bootargs);
+
+ kernel();
+}
diff --git a/lib_sh/time.c b/lib_sh/time.c
new file mode 100644
index 0000000..3d33918
--- /dev/null
+++ b/lib_sh/time.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processer.h>
+
+static void tmu_timer_start (unsigned int timer)
+{
+ if (timer > 2)
+ return;
+
+ *((volatile unsigned char *) TSTR0) |= (1 << timer);
+}
+
+int timer_init (void)
+{
+ *(volatile u16 *)TCR0 = 0;
+
+ tmu_timer_start (0);
+ return 0;
+}
+
+unsigned long long get_ticks (void)
+{
+ return (0 - *((volatile unsigned int *) TCNT0));
+}
+
+unsigned long get_timer (unsigned long base)
+{
+ return ((0 - *((volatile unsigned int *) TCNT0)) - base);
+}
+
+void set_timer (unsigned long t)
+{
+ *((volatile unsigned int *) TCNT0) = (0 - t);
+}
+
+void reset_timer (void)
+{
+ set_timer (0);
+}
+
+void udelay (unsigned long usec)
+{
+ unsigned int start = get_timer (0);
+ unsigned int end = start + (usec * ((CFG_HZ + 500000) / 1000000));
+
+ while (get_timer (0) < end)
+ continue;
+}
+
+unsigned long get_tbclk (void)
+{
+ return CFG_HZ;
+}
diff --git a/sh_config.mk b/sh_config.mk
new file mode 100644
index 0000000..49d50f7
--- /dev/null
+++ b/sh_config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000-2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__