summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG9
-rw-r--r--Makefile3
-rw-r--r--board/fads/config.mk8
-rw-r--r--board/fads/fads.c17
-rw-r--r--board/fads/lamp.c5
-rw-r--r--board/fads/u-boot.lds44
-rw-r--r--common/cmd_pcmcia.c2
-rw-r--r--common/main.c2
-rw-r--r--cpu/mpc8xx/cpu_init.c4
-rw-r--r--cpu/mpc8xx/serial.c2
-rw-r--r--examples/Makefile2
-rw-r--r--include/configs/ADS860.h214
-rw-r--r--include/configs/FADS860T.h28
-rw-r--r--include/configs/MPC86xADS.h121
14 files changed, 164 insertions, 297 deletions
diff --git a/CHANGELOG b/CHANGELOG
index a1ad875..e64a19d 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,15 @@
Changes since U-Boot 1.0.0:
======================================================================
+* Patch by Yuli Barcohen, 3 Dec 2003:
+ "revive" U-Boot support for old Motorola MPC860ADS board
+
+* Patch by Cam(ilo?), 03 Dec 2003:
+ make examples build even with broken Montavista objcopy
+
+* Patch by Pavel Bartusek, 27 Nov 2003:
+ fix conversion problem with "bootretry" evironment variable
+
* Patch by Andre Schwarz, 24 Nov 2003:
add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
diff --git a/Makefile b/Makefile
index cbfb6b0..6abc8c7 100644
--- a/Makefile
+++ b/Makefile
@@ -115,6 +115,7 @@ SUBDIRS = tools \
examples \
post \
post/cpu
+.PHONY : $(SUBDIRS)
#########################################################################
#########################################################################
@@ -150,7 +151,7 @@ $(LIBS):
$(SUBDIRS):
@echo "#### MAKE $@ ####"
- $(MAKE) -C $@
+ $(MAKE) -C $@ all
gdbtools:
$(MAKE) -C tools/gdb || exit 1
diff --git a/board/fads/config.mk b/board/fads/config.mk
index a9dbb8e..bad02f2 100644
--- a/board/fads/config.mk
+++ b/board/fads/config.mk
@@ -22,9 +22,9 @@
#
#
-# FADS boards
+# Motorola old MPC821/860ADS, MPC8xxFADS, and new MPC866ADS boards
#
-#TEXT_BASE = 0xFE000000
-TEXT_BASE = 0x02800000
-OBJCFLAGS = --set-section-flags=.ppcenv=contents,alloc,load,data
+TEXT_BASE = 0xFE000000
+#TEXT_BASE = 0x02800000
+#OBJCFLAGS = --set-section-flags=.ppcenv=contents,alloc,load,data
diff --git a/board/fads/fads.c b/board/fads/fads.c
index 3856b45..aca7b28 100644
--- a/board/fads/fads.c
+++ b/board/fads/fads.c
@@ -360,7 +360,11 @@ static int _draminit (uint base, uint noMbytes, uint edo, uint delay)
switch (noMbytes) {
case 4: /* 4 Mbyte uses only CS2 */
+#ifdef CONFIG_ADS
+ memctl->memc_mamr = 0xc0a21114;
+#else
memctl->memc_mamr = 0x13a01114; /* PTA 0x13 AMA 010 */
+#endif
memctl->memc_or2 = 0xffc00800; /* 4M */
break;
@@ -393,17 +397,18 @@ static int _draminit (uint base, uint noMbytes, uint edo, uint delay)
memctl->memc_br2 = 0x81 + base; /* use upma */
+ *((uint *) BCSR1) &= ~BCSR1_DRAM_EN; /* enable dram */
+
/* if no dimm is inserted, noMbytes is still detected as 8m, so
* sanity check top and bottom of memory */
- *((uint *) BCSR1) &= ~BCSR1_DRAM_EN; /* enable dram */
-
/* check bytes / 2 because dram_size tests at base+bytes, which
* is not mapped */
- if (dram_size ((long *) base, noMbytes << 19) != noMbytes << 19) {
- *((uint *) BCSR1) |= BCSR1_DRAM_EN; /* disable dram */
- return -1;
- }
+ if (noMbytes == 8)
+ if (dram_size ((long *) base, noMbytes << 19) != noMbytes << 19) {
+ *((uint *) BCSR1) |= BCSR1_DRAM_EN; /* disable dram */
+ return -1;
+ }
return 0;
}
diff --git a/board/fads/lamp.c b/board/fads/lamp.c
index b121477..4e58291 100644
--- a/board/fads/lamp.c
+++ b/board/fads/lamp.c
@@ -1,4 +1,7 @@
#include <config.h>
+
+#ifndef CONFIG_ADS /* Old ADS has not got any user-controllable LED */
+
#include <common.h>
void
@@ -40,3 +43,5 @@ fast_blink(unsigned int n)
signal_delay(0x00100000);
}
}
+
+#endif /* !CONFIG_ADS */
diff --git a/board/fads/u-boot.lds b/board/fads/u-boot.lds
index 41776d1..5fe5e22 100644
--- a/board/fads/u-boot.lds
+++ b/board/fads/u-boot.lds
@@ -22,9 +22,6 @@
*/
OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
SECTIONS
{
/* Read-only sections, merged into text segment: */
@@ -33,41 +30,30 @@ SECTIONS
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
+ .rel.text : { *(.rel.text) }
.rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
+ .rel.data : { *(.rel.data) }
.rela.data : { *(.rela.data) }
.rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
.plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
+ cpu/mpc8xx/start.o (.text)
- cpu/mpc8xx/start.o (.text)
-/*
- cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib_ppc/ppcstring.o (.text)
- lib_generic/vsprintf.o (.text)
- lib_generic/crc32.o (.text)
- lib_generic/zlib.o (.text)
-
- . = env_offset;
- common/environment.o(.text)
-*/
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.ppcenv)
*(.text)
*(.fixup)
@@ -136,11 +122,7 @@ SECTIONS
*(.bss)
*(COMMON)
}
- . = ALIGN(256 * 1024);
- .ppcenv :
- {
- common/environment.o (.ppcenv)
- }
_end = . ;
PROVIDE (end = .);
}
+ENTRY(_start)
diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
index 1a8c123..3d38d5c 100644
--- a/common/cmd_pcmcia.c
+++ b/common/cmd_pcmcia.c
@@ -57,7 +57,7 @@
#include <command.h>
#include <config.h>
#include <pcmcia.h>
-#if defined(CONFIG_IDE_8xx_PCCARD) && defined(CONFIG_8xx)
+#if defined(CONFIG_8xx)
#include <mpc8xx.h>
#endif
#if defined(CONFIG_LWMON)
diff --git a/common/main.c b/common/main.c
index a0c9fe8..f465e2c 100644
--- a/common/main.c
+++ b/common/main.c
@@ -505,7 +505,7 @@ void init_cmd_timeout(void)
char *s = getenv ("bootretry");
if (s != NULL)
- retry_time = (int)simple_strtoul(s, NULL, 10);
+ retry_time = (int)simple_strtol(s, NULL, 10);
else
retry_time = CONFIG_BOOT_RETRY_TIME;
diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c
index dbf5db0..8f06dd1 100644
--- a/cpu/mpc8xx/cpu_init.c
+++ b/cpu/mpc8xx/cpu_init.c
@@ -145,9 +145,7 @@ void cpu_init_f (volatile immap_t * immr)
defined(CONFIG_R360MPI) || \
defined(CONFIG_RPXCLASSIC) || \
defined(CONFIG_RPXLITE) || \
- defined(CONFIG_SPD823TS) || \
- defined(CONFIG_MPC86xADS) || \
- (defined(CONFIG_MPC860T) && defined(CONFIG_FADS))
+ defined(CONFIG_SPD823TS)
memctl->memc_br0 = CFG_BR0_PRELIM;
#endif
diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c
index 5ca4d90..faea3c3 100644
--- a/cpu/mpc8xx/serial.c
+++ b/cpu/mpc8xx/serial.c
@@ -153,7 +153,7 @@ int serial_init (void)
# endif
#endif
-#if defined(CONFIG_FADS)
+#if defined(CONFIG_FADS) || defined(CONFIG_ADS)
/* Enable RS232 */
#if defined(CONFIG_8xx_CONS_SMC1)
*((uint *) BCSR1) &= ~BCSR1_RS232EN_1;
diff --git a/examples/Makefile b/examples/Makefile
index a353203..1e40c82 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -104,7 +104,7 @@ $(LIB): .depend $(LIBOBJS)
$(OBJCOPY) -O srec $(<:.o=) $@
%.bin: %.srec
- $(OBJCOPY) -O binary $< $@ 2>/dev/null
+ $(OBJCOPY) -O binary $(<:.srec=) $@ 2>/dev/null
#########################################################################
diff --git a/include/configs/ADS860.h b/include/configs/ADS860.h
index 0045303..1b037c9 100644
--- a/include/configs/ADS860.h
+++ b/include/configs/ADS860.h
@@ -16,29 +16,31 @@
* High Level Configuration Options
* (easy to change)
*/
-#include <mpc8xx_irq.h>
+/* Board type */
+#define CONFIG_ADS 1 /* Old Motorola MPC821/860ADS */
+
+/* Processor type */
#define CONFIG_MPC860 1
-#define CONFIG_MPC860T 1
-#define CONFIG_ADS 1
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
+#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#undef CONFIG_8xx_CONS_SMC2
#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 19200 /* console baudrate */
-#define CONFIG_PCMCIA 1 /* To enable PCMCIA support */
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#define CFG_I2C_SPEED 400000 /* I2C speed and slave address defaults */
-#define CFG_I2C_SLAVE 0x7F
+#define CONFIG_BAUDRATE 38400 /* Console baudrate */
+/* CFG_8XX_FACT * CFG_8XX_XIN = 50 MHz */
+#if 0
#define CFG_8XX_XIN 32768 /* 32.768 kHz input frequency */
#define CFG_8XX_FACT 0x5F6 /* Multiply by 1526 */
- /* MPC8XX_FACT * MPC8XX_XIN = 50 MHz */
+#else
+#define CFG_8XX_XIN 4000000 /* 4 MHz input frequency */
+#define CFG_8XX_FACT 12 /* Multiply by 12 */
+#endif
#define CONFIG_8xx_GCLK_FREQ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
+#define CONFIG_DRAM_50MHZ 1
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
@@ -47,11 +49,11 @@
#endif
#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
- "bootm"
+#define CONFIG_BOOTCOMMAND \
+ "dhcp;" \
+ "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+ "bootm"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
@@ -60,18 +62,16 @@
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
-
-#if 0 /* private command defs */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_I2C | \
- CFG_CMD_IDE | CFG_CMD_PCMCIA)
-#endif
- /* default command defs */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_CACHE)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_DHCP \
+ | CFG_CMD_IMMAP \
+ | CFG_CMD_PCMCIA \
+ | CFG_CMD_PING \
+ )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
@@ -103,7 +103,7 @@
/*-----------------------------------------------------------------------
* Internal Memory Mapped Register
*/
-#define CFG_IMMR 0xfff00000
+#define CFG_IMMR 0xFF000000
#define CFG_IMMR_SIZE ((uint)(64 * 1024))
/*-----------------------------------------------------------------------
@@ -121,13 +121,6 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SRAM_BASE 0x00000000
-#define CFG_FLASH_BASE 0xfe000000
-#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */
-
-#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
-#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */
/*
* For booting Linux, the board info and command line data
@@ -138,6 +131,9 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
+#define CFG_FLASH_BASE TEXT_BASE
+#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */
+
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 16 /* max number of sectors on one chip */
@@ -148,9 +144,14 @@
#undef CFG_ENV_IS_IN_EEPROM
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_OFFSET 0x00040000
-#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sector total size */
+#define CFG_ENV_OFFSET CFG_ENV_SECT_SIZE
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment */
+
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve one flash sector
+ (256 KB) for monitor */
+#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */
/* the other CS:s are determined by looking at parameters in BCSRx */
@@ -163,6 +164,15 @@
#endif
/*-----------------------------------------------------------------------
+ * I2C configuration
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address defaults */
+#define CFG_I2C_SLAVE 0x7F
+#endif
+
+/*-----------------------------------------------------------------------
* SYPCR - System Protection Control 11-9
* SYPCR can only be written once after reset!
*-----------------------------------------------------------------------
@@ -176,7 +186,7 @@
#endif
/*-----------------------------------------------------------------------
- * SUMCR - SIU Module Configuration 11-6
+ * SUMCR - SIU Module Configuration 11-6
*-----------------------------------------------------------------------
* PCMCIA config., multi-function pin tri-state
*/
@@ -234,40 +244,22 @@
/*
* Init Memory Controller:
*
- * BR0/1 and OR0/1 (FLASH)
+ * BR0 and OR0 (FLASH)
+ * BR1 and OR1 (BCSR)
*/
/* the other CS:s are determined by looking at parameters in BCSRx */
#define BCSR_ADDR ((uint) 0xff010000)
-#define BCSR_SIZE ((uint)(64 * 1024))
-
-#define FLASH_BASE0_PRELIM 0xfe000000 /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0x00000000 /* FLASH bank #1 */
-#define CFG_REMAP_OR_AM 0xff000000 /* OR addr mask */
-#define CFG_PRELIM_OR_AM 0xffe00000 /* OR addr mask */
+#define CFG_PRELIM_OR_AM 0xff800000 /* OR addr mask */
/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
-#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
-
-#ifdef USE_REAL_FLASH_VALUES
-/*
- * These values fit our FADS860T ...
- * The "default" behaviour with 1Mbyte initial doesn't work for us!
- */
-#define CFG_BR0_PRELIM 0x0fe000001 /* Real values for the board */
-#define CFG_OR0_PRELIM 0x0ffe00d34
-#define CFG_BR2_PRELIM 0x000000081
-#define CFG_OR2_PRELIM 0x0ff000800
-#else
-#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) /* 1 Mbyte until detected and only 1 Mbyte is needed*/
-#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
-#endif
+#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) /* 8 Mbyte until detected */
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_V)
/* BCSRx - Board Control and Status Registers */
-/* #define CFG_OR1_REMAP CFG_OR0_REMAP */
#define CFG_OR1_PRELIM 0xffff8110 /* 64Kbyte address space */
#define CFG_BR1_PRELIM ((BCSR_ADDR) | BR_V )
@@ -275,9 +267,6 @@
* Memory Periodic Timer Prescaler
*/
-/* periodic timer for refresh */
-#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */
-
/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
@@ -287,20 +276,6 @@
#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-/* 9 column SDRAM */
-#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-#define CFG_MAMR 0x13a01114
-/*
* Internal Definitions
*
* Boot Flags
@@ -310,11 +285,10 @@
/* values according to the manual */
-#define BCSR0 ((uint) (BCSR_ADDR + 00))
-#define BCSR1 ((uint) (BCSR_ADDR + 0x04))
-#define BCSR2 ((uint) (BCSR_ADDR + 0x08))
-#define BCSR3 ((uint) (BCSR_ADDR + 0x0c))
-#define BCSR4 ((uint) (BCSR_ADDR + 0x10))
+#define BCSR0 (BCSR_ADDR + 0x00)
+#define BCSR1 (BCSR_ADDR + 0x04)
+#define BCSR2 (BCSR_ADDR + 0x08)
+#define BCSR3 (BCSR_ADDR + 0x0c)
/*-----------------------------------------------------------------------
@@ -322,6 +296,10 @@
*-----------------------------------------------------------------------
*
*/
+#ifdef CONFIG_MPC860
+#define PCMCIA_SLOT_A 1
+#endif
+
#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
@@ -331,7 +309,6 @@
#define CFG_PCMCIA_IO_ADDR (0xEC000000)
#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
-
/*-----------------------------------------------------------------------
* IDE/ATA stuff
*-----------------------------------------------------------------------
@@ -346,7 +323,6 @@
#define CFG_PIO_MODE 0 /* IDE interface in PIO Mode 0 */
#define CFG_PC_IDE_RESET ((ushort)0x0008) /* PC 12 */
-/* #define CFG_ATA_BASE_ADDR 0xFE100000 */
#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
#define CFG_ATA_IDE0_OFFSET 0x0000
@@ -354,6 +330,8 @@
#define CFG_ATA_REG_OFFSET 0x0080 /* Offset for normal register accesses */
#define CFG_ATA_ALT_OFFSET 0x0100 /* Offset for alternate registers */
+#define CONFIG_DISK_SPINUP_TIME 1000000
+#undef CONFIG_DISK_SPINUP_TIME /* usinī Compact Flash */
/* (F)ADS bitvalues by Helmut Buchsbaum
* see MPC8xxADS User's Manual for a proper description
@@ -399,65 +377,6 @@
#define BCSR3_BREVN1 ((ushort)0x0008)
#define BCSR3_BREVN2_MASK ((ushort)0x0003)
-#define BCSR4_ETHLOOP ((uint)0x80000000)
-#define BCSR4_TFPLDL ((uint)0x40000000)
-#define BCSR4_TPSQEL ((uint)0x20000000)
-#define BCSR4_SIGNAL_LAMP ((uint)0x10000000)
-#ifdef CONFIG_MPC823
-#define BCSR4_USB_EN ((uint)0x08000000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC860SAR
-#define BCSR4_UTOPIA_EN ((uint)0x08000000)
-#endif /* CONFIG_MPC860SAR */
-#ifdef CONFIG_MPC860T
-#define BCSR4_FETH_EN ((uint)0x08000000)
-#endif /* CONFIG_MPC860T */
-#ifdef CONFIG_MPC823
-#define BCSR4_USB_SPEED ((uint)0x04000000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC860T
-#define BCSR4_FETHCFG0 ((uint)0x04000000)
-#endif /* CONFIG_MPC860T */
-#ifdef CONFIG_MPC823
-#define BCSR4_VCCO ((uint)0x02000000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC860T
-#define BCSR4_FETHFDE ((uint)0x02000000)
-#endif /* CONFIG_MPC860T */
-#ifdef CONFIG_MPC823
-#define BCSR4_VIDEO_ON ((uint)0x00800000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC823
-#define BCSR4_VDO_EKT_CLK_EN ((uint)0x00400000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC860T
-#define BCSR4_FETHCFG1 ((uint)0x00400000)
-#endif /* CONFIG_MPC860T */
-#ifdef CONFIG_MPC823
-#define BCSR4_VIDEO_RST ((uint)0x00200000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC860T
-#define BCSR4_FETHRST ((uint)0x00200000)
-#endif /* CONFIG_MPC860T */
-#ifdef CONFIG_MPC823
-#define BCSR4_MODEM_EN ((uint)0x00100000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC823
-#define BCSR4_DATA_VOICE ((uint)0x00080000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC850
-#define BCSR4_DATA_VOICE ((uint)0x00080000)
-#endif /* CONFIG_MPC850 */
-
-#define CONFIG_DRAM_50MHZ 1
-#define CONFIG_SDRAM_50MHZ
-
-#ifdef CONFIG_MPC860T
-/* Interrupt level assignments.
- */
-#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */
-#endif /* CONFIG_MPC860T */
-
/* We don't use the 8259.
*/
#define NR_8259_INTS 0
@@ -466,17 +385,4 @@
*/
#define _MACH_8xx (_MACH_ads)
-#if 0
-#define CONFIG_DISK_SPINUP_TIME 1000000
-#endif
-#undef CONFIG_DISK_SPINUP_TIME /* usinī Compact Flash */
-
-
-/* PCMCIA configuration
- */
-#define PCMCIA_MAX_SLOTS 2
-#ifdef CONFIG_MPC860
-#define PCMCIA_SLOT_A 1
-#endif
-
#endif /* _CONFIG_ADS860_H */
diff --git a/include/configs/FADS860T.h b/include/configs/FADS860T.h
index fd56010..114603c 100644
--- a/include/configs/FADS860T.h
+++ b/include/configs/FADS860T.h
@@ -30,7 +30,6 @@
* High Level Configuration Options
* (easy to change)
*/
-#include <mpc8xx_irq.h>
/* board type */
#define CONFIG_FADS 1 /* old/new FADS + new ADS */
@@ -58,9 +57,6 @@
/* in general, we always know this for FADS+new ADS anyway */
#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
-/* most vanilla kernels do not like this, set to 0 if in doubt */
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#if 1
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
@@ -163,11 +159,11 @@
# define CFG_SDRAM_SIZE 0x00000000 /* NO SDRAM */
#endif
-#define CFG_FLASH_BASE 0x02800000
+#define CFG_FLASH_BASE TEXT_BASE
#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */
-#define CFG_MONITOR_LEN (272 << 10) /* Reserve 272 kB for Monitor */
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */
@@ -184,7 +180,7 @@
#define CFG_MAX_FLASH_SECT 16 /* max number of sectors on one chip */
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x00040000
@@ -276,14 +272,11 @@
#define BCSR_ADDR ((uint) 0xFF010000)
#define BCSR_SIZE ((uint)(64 * 1024))
-#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
#define CFG_PRELIM_OR_AM 0xFF800000 /* OR addr mask */
-/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
+/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
-#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
-
#ifdef USE_REAL_FLASH_VALUES
/*
* These values fit our FADS860T ...
@@ -297,7 +290,6 @@
#endif
/* BCSRx - Board Control and Status Registers */
-#define CFG_OR1_REMAP CFG_OR0_REMAP
#define CFG_OR1_PRELIM 0xffff8110 /* 64Kbyte address space */
#define CFG_BR1_PRELIM ((BCSR_ADDR) | BR_V )
@@ -316,7 +308,7 @@
#define PCMCIA_MEM_ADDR ((uint)0xff020000)
#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
-#define BCSR0 ((uint) (BCSR_ADDR + 00))
+#define BCSR0 ((uint) (BCSR_ADDR + 0x00))
#define BCSR1 ((uint) (BCSR_ADDR + 0x04))
#define BCSR2 ((uint) (BCSR_ADDR + 0x08))
#define BCSR3 ((uint) (BCSR_ADDR + 0x0c))
@@ -418,14 +410,6 @@
#define CONFIG_DRAM_50MHZ 1
#define CONFIG_SDRAM_50MHZ 1
-#ifdef CONFIG_MPC860T
-
-/* Interrupt level assignments.
-*/
-#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */
-
-#endif /* CONFIG_MPC860T */
-
/* We don't use the 8259.
*/
#define NR_8259_INTS 0
@@ -439,8 +423,6 @@
/* PCMCIA configuration */
-#define PCMCIA_MAX_SLOTS 2
-
#ifdef CONFIG_MPC860
#define PCMCIA_SLOT_A 1
#endif
diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h
index fc79c52..1eac6ef 100644
--- a/include/configs/MPC86xADS.h
+++ b/include/configs/MPC86xADS.h
@@ -9,10 +9,10 @@
* 1999-nov-26: The FADS is using the following physical memorymap:
*
* ff020000 -> ff02ffff : pcmcia
- * ff010000 -> ff01ffff : BCSR connected to CS1, setup by 8xxrom
+ * ff010000 -> ff01ffff : BCSR connected to CS1
* ff000000 -> ff00ffff : IMAP internal in the cpu
- * fe000000 -> ffnnnnnn : flash connected to CS0, setup by 8xxrom
- * 00000000 -> nnnnnnnn : sdram/dram setup by 8xxrom
+ * fe000000 -> fennnnnn : flash connected to CS0
+ * 00000000 -> nnnnnnnn : sdram connected to CS4
*/
/* ------------------------------------------------------------------------- */
@@ -28,7 +28,6 @@
* High Level Configuration Options
* (easy to change)
*/
-#include <mpc8xx_irq.h>
/* board type */
#define CONFIG_MPC86xADS 1 /* new ADS */
@@ -66,9 +65,6 @@
/* in general, we always know this for FADS+new ADS anyway */
#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
-/* most vanilla kernels do not like this, set to 0 if in doubt */
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#if 1
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
@@ -76,14 +72,12 @@
#endif
#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+#define CONFIG_BOOTCOMMAND \
+ "dhcp;" \
+ "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
"bootm"
-/* #include "local.h" */
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
/* ATA / IDE and partition support */
@@ -96,21 +90,27 @@
#undef CONFIG_IDE_LED /* LED for ide not supported */
#undef CONFIG_IDE_RESET /* reset for ide not supported */
-/* choose SCC1 ethernet (10BASET on motherboard)
- * or FEC ethernet (10/100 on daughterboard)
+/*
+ * New MPC86xADS provides two Ethernet connectivity options:
+ * 10Mbit/s on SCC1 and 100Mbit/s on FEC. All new PQ1 chips
+ * has got FEC so FEC is the default.
*/
-#if 0
-#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */
-#undef CONFIG_FEC_ENET /* disable FEC ethernet */
-#else /* all 86x cores have FECs, if in doubt, use it */
#undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
#define CONFIG_FEC_ENET 1 /* use FEC ethernet */
+#ifdef CONFIG_FEC_ENET
#define CFG_DISCOVER_PHY
#endif
#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
#endif
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_DHCP \
+ | CFG_CMD_IMMAP \
+ | CFG_CMD_MII \
+ | CFG_CMD_PING \
+ )
+
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -128,13 +128,6 @@
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
-#if (CFG_SDRAM_SIZE)
-#define CFG_MEMTEST_END CFG_SDRAM_SIZE /* 1 ... SDRAM_SIZE */
-#else
-#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
-#endif
-
#define CFG_LOAD_ADDR 0x00100000
#define CFG_HZ 1000 /* decr freq: 1 ms ticks */
@@ -167,23 +160,20 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
-#ifdef CONFIG_FADS
-# ifdef CONFIG_MPC86xADS /* new ADS */
-# define CFG_SDRAM_SIZE 0x00800000 /* 8 meg */
-# else /* old/new FADS */
-# define CFG_SDRAM_SIZE 0x00400000 /* 4 meg */
-# endif
-#else /* !CONFIG_FADS */ /* old ADS */
-# define CFG_SDRAM_SIZE 0x00000000 /* NO SDRAM */
+#if defined(CONFIG_MPC86xADS) /* new ADS */
+#define CFG_SDRAM_SIZE 0x00800000 /* 8 meg */
+#elif defined(CONFIG_FADS) /* old/new FADS */
+#define CFG_SDRAM_SIZE 0x00400000 /* 4 meg */
+#else /* old ADS */
+#define CFG_SDRAM_SIZE 0x00000000 /* No SDRAM */
#endif
-#define CFG_FLASH_BASE 0x02800000
-
-#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */
-
-#define CFG_MONITOR_LEN (272 << 10) /* Reserve 272 kB for Monitor */
-#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */
+#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
+#if (CFG_SDRAM_SIZE)
+#define CFG_MEMTEST_END CFG_SDRAM_SIZE /* 1 ... SDRAM_SIZE */
+#else
+#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
+#endif /* CFG_SDRAM_SIZE */
/*
* For booting Linux, the board info and command line data
@@ -194,6 +184,9 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
+#define CFG_FLASH_BASE TEXT_BASE
+#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */
+
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 16 /* max number of sectors on one chip */
@@ -201,10 +194,13 @@
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_OFFSET 0x00040000
-#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
#define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sector total size */
+#define CFG_ENV_OFFSET CFG_ENV_SECT_SIZE
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment */
+
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */
+#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */
/*-----------------------------------------------------------------------
* Cache Configuration
@@ -215,7 +211,7 @@
#endif
/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
+ * SYPCR - System Protection Control 11-9
* SYPCR can only be written once after reset!
*-----------------------------------------------------------------------
* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
@@ -228,14 +224,14 @@
#endif
/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
+ * SIUMCR - SIU Module Configuration 11-6
*-----------------------------------------------------------------------
* PCMCIA config., multi-function pin tri-state
*/
#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
+ * TBSCR - Time Base Status and Control 11-26
*-----------------------------------------------------------------------
* Clear Reference Interrupt Status, Timebase freezing enabled
*/
@@ -249,9 +245,9 @@
#define CFG_PISCR (PISCR_PS | PISCR_PITF)
/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
+ * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
*-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control (15-29)
+ * set the PLL, the low-power modes and the reset control (15-29)
*/
#define CFG_PLPRCR ((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) | \
PLPRCR_SPLSS | PLPRCR_TEXPS)
@@ -283,34 +279,23 @@
/*
* Init Memory Controller:
*
- * BR0/1 and OR0/1 (FLASH)
+ * BR0/OR0 (Flash)
+ * BR1/OR1 (BCSR)
*/
/* the other CS:s are determined by looking at parameters in BCSRx */
#define BCSR_ADDR ((uint) 0xFF010000)
#define BCSR_SIZE ((uint)(64 * 1024))
-#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
#define CFG_PRELIM_OR_AM 0xFF800000 /* OR addr mask */
-/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
+/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
-#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
-
-#ifdef USE_REAL_FLASH_VALUES
-/*
- * The "default" behaviour with 1Mbyte initial doesn't work for us!
- */
-#define CFG_OR0_PRELIM 0x0FFC00D34 /* Real values for the board */
-#define CFG_BR0_PRELIM 0x02800001 /* Real values for the board */
-#else
#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) /* 8 Mbyte until detected */
#define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BR_BA_MSK) | BR_V )
-#endif
/* BCSRx - Board Control and Status Registers */
-#define CFG_OR1_REMAP CFG_OR0_REMAP
#define CFG_OR1_PRELIM 0xffff8110 /* 64Kbyte address space */
#define CFG_BR1_PRELIM ((BCSR_ADDR) | BR_V )
@@ -327,7 +312,7 @@
#define PCMCIA_MEM_ADDR ((uint)0xff020000)
#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
-#define BCSR0 ((uint) (BCSR_ADDR + 00))
+#define BCSR0 ((uint) (BCSR_ADDR + 0x00))
#define BCSR1 ((uint) (BCSR_ADDR + 0x04))
#define BCSR2 ((uint) (BCSR_ADDR + 0x08))
#define BCSR3 ((uint) (BCSR_ADDR + 0x0c))
@@ -389,10 +374,6 @@
#define CONFIG_DRAM_50MHZ 1
#define CONFIG_SDRAM_50MHZ 1
-/* Interrupt level assignments.
-*/
-#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */
-
/* We don't use the 8259.
*/
#define NR_8259_INTS 0
@@ -406,12 +387,10 @@
/* PCMCIA configuration */
-#define PCMCIA_MAX_SLOTS 2
-
#ifdef CONFIG_MPC860
#define PCMCIA_SLOT_A 1
#endif
-/*#define CFG_PCMCIA_MEM_SIZE ( 64 << 20) */
+
#define CFG_PCMCIA_MEM_ADDR (0x50000000)
#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
#define CFG_PCMCIA_DMA_ADDR (0x54000000)