diff options
| -rw-r--r-- | arch/blackfin/cpu/serial.c | 40 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/config.h | 18 | ||||
| -rw-r--r-- | arch/blackfin/lib/Makefile | 2 | ||||
| -rw-r--r-- | arch/blackfin/lib/post.c | 85 | ||||
| -rw-r--r-- | arch/blackfin/lib/tests.c | 250 | ||||
| -rw-r--r-- | board/bf537-stamp/Makefile | 2 | ||||
| -rw-r--r-- | board/bf537-stamp/post-memory.c | 63 | ||||
| -rw-r--r-- | board/bf537-stamp/post.c | 174 | ||||
| -rw-r--r-- | include/configs/bf537-stamp.h | 11 | ||||
| -rw-r--r-- | include/configs/bf548-ezkit.h | 10 | ||||
| -rw-r--r-- | include/configs/bfin_adi_common.h | 1 | ||||
| -rw-r--r-- | post/tests.c | 2 |
12 files changed, 165 insertions, 493 deletions
diff --git a/arch/blackfin/cpu/serial.c b/arch/blackfin/cpu/serial.c index 030160f..6603dc0 100644 --- a/arch/blackfin/cpu/serial.c +++ b/arch/blackfin/cpu/serial.c @@ -38,6 +38,7 @@ */ #include <common.h> +#include <post.h> #include <watchdog.h> #include <serial.h> #include <linux/compiler.h> @@ -153,6 +154,30 @@ static int uart_getc(uint32_t uart_base) return uart_rbr_val; } +#if CONFIG_POST & CONFIG_SYS_POST_UART +# define LOOP(x) x +#else +# define LOOP(x) +#endif + +LOOP( +static void uart_loop(uint32_t uart_base, int state) +{ + u16 mcr; + + /* Drain the TX fifo first so bytes don't come back */ + while (!(uart_lsr_read(uart_base) & TEMT)) + continue; + + mcr = bfin_read(&pUART->mcr); + if (state) + mcr |= LOOP_ENA | MRTS; + else + mcr &= ~(LOOP_ENA | MRTS); + bfin_write(&pUART->mcr, mcr); +} +) + #ifdef CONFIG_SYS_BFIN_UART static void uart_puts(uint32_t uart_base, const char *s) @@ -202,6 +227,13 @@ static void uart##n##_puts(const char *s) \ uart_puts(MMR_UART(n), s); \ } \ \ +LOOP( \ +static void uart##n##_loop(int state) \ +{ \ + uart_loop(MMR_UART(n), state); \ +} \ +) \ +\ struct serial_device bfin_serial##n##_device = { \ .name = "bfin_uart"#n, \ .init = uart##n##_init, \ @@ -211,6 +243,7 @@ struct serial_device bfin_serial##n##_device = { \ .tstc = uart##n##_tstc, \ .putc = uart##n##_putc, \ .puts = uart##n##_puts, \ + LOOP(.loop = uart##n##_loop) \ }; #ifdef UART0_DLL @@ -307,6 +340,13 @@ void serial_puts(const char *s) serial_putc(*s++); } +LOOP( +void serial_loop(int state) +{ + uart_loop(UART_DLL, state); +} +) + #endif #endif diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h index bc3c252..53af310 100644 --- a/arch/blackfin/include/asm/config.h +++ b/arch/blackfin/include/asm/config.h @@ -169,4 +169,22 @@ # define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #endif +/* Blackfin POST tests */ +#ifdef CONFIG_POST_BSPEC1_GPIO_LEDS +# define CONFIG_POST_BSPEC1 \ + { \ + "LED test", "led", "This test verifies LEDs on the board.", \ + POST_MEM | POST_ALWAYS, &led_post_test, NULL, NULL, \ + CONFIG_SYS_POST_BSPEC1, \ + } +#endif +#ifdef CONFIG_POST_BSPEC2_GPIO_BUTTONS +# define CONFIG_POST_BSPEC2 \ + { \ + "Button test", "button", "This test verifies buttons on the board.", \ + POST_MEM | POST_ALWAYS, &button_post_test, NULL, NULL, \ + CONFIG_SYS_POST_BSPEC2, \ + } +#endif + #endif diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile index 4a22766..37e0663 100644 --- a/arch/blackfin/lib/Makefile +++ b/arch/blackfin/lib/Makefile @@ -46,7 +46,7 @@ COBJS-y += clocks.o COBJS-$(CONFIG_CMD_CACHE_DUMP) += cmd_cache_dump.o COBJS-$(CONFIG_CMD_KGDB) += kgdb.o COBJS-y += muldi3.o -COBJS-$(CONFIG_POST_ALT_LIST) += tests.o +COBJS-$(CONFIG_HAS_POST) += post.o COBJS-y += string.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) diff --git a/arch/blackfin/lib/post.c b/arch/blackfin/lib/post.c new file mode 100644 index 0000000..b3c5fab --- /dev/null +++ b/arch/blackfin/lib/post.c @@ -0,0 +1,85 @@ +/* + * Blackfin POST code + * + * Copyright (c) 2005-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <config.h> +#include <post.h> + +#include <asm/gpio.h> + +#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1 +int led_post_test(int flags) +{ + unsigned leds[] = { CONFIG_POST_BSPEC1_GPIO_LEDS }; + int i; + + /* First turn them all off */ + for (i = 0; i < ARRAY_SIZE(leds); ++i) { + if (gpio_request(leds[i], "post")) { + printf("could not request gpio %u\n", leds[i]); + continue; + } + gpio_direction_output(leds[i], 0); + } + + /* Now turn them on one by one */ + for (i = 0; i < ARRAY_SIZE(leds); ++i) { + printf("LED%i on", i + 1); + gpio_set_value(leds[i], 1); + udelay(1000000); + printf("\b\b\b\b\b\b\b"); + gpio_free(leds[i]); + } + + return 0; +} +#endif + +#if CONFIG_POST & CONFIG_SYS_POST_BSPEC2 +int button_post_test(int flags) +{ + unsigned buttons[] = { CONFIG_POST_BSPEC2_GPIO_BUTTONS }; + unsigned int sws[] = { CONFIG_POST_BSPEC2_GPIO_NAMES }; + int i, delay = 5; + unsigned short value = 0; + int result = 0; + + for (i = 0; i < ARRAY_SIZE(buttons); ++i) { + if (gpio_request(buttons[i], "post")) { + printf("could not request gpio %u\n", buttons[i]); + continue; + } + gpio_direction_input(buttons[i]); + + delay = 5; + printf("\n--------Press SW%i: %2d ", sws[i], delay); + while (delay--) { + int j; + for (j = 0; j < 100; j++) { + value = gpio_get_value(buttons[i]); + if (value != 0) + break; + udelay(10000); + } + printf("\b\b\b%2d ", delay); + } + if (value != 0) + puts("\b\bOK"); + else { + result = -1; + puts("\b\bfailed"); + } + + gpio_free(buttons[i]); + } + + puts("\n"); + + return result; +} +#endif diff --git a/arch/blackfin/lib/tests.c b/arch/blackfin/lib/tests.c deleted file mode 100644 index bf7fba0..0000000 --- a/arch/blackfin/lib/tests.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Be sure to mark tests to be run before relocation as such with the - * CONFIG_SYS_POST_PREREL flag so that logging is done correctly if the - * logbuffer support is enabled. - */ - -#include <common.h> -#include <config.h> - -#include <post.h> -#define CONFIG_SYS_POST_FLASH 0x00004000 -#define CONFIG_SYS_POST_LED 0x00008000 -#define CONFIG_SYS_POST_BUTTON 0x00010000 - -extern int cache_post_test(int flags); -extern int watchdog_post_test(int flags); -extern int i2c_post_test(int flags); -extern int rtc_post_test(int flags); -extern int memory_post_test(int flags); -extern int cpu_post_test(int flags); -extern int uart_post_test(int flags); -extern int ether_post_test(int flags); -extern int spi_post_test(int flags); -extern int usb_post_test(int flags); -extern int spr_post_test(int flags); -extern int sysmon_post_test(int flags); -extern int dsp_post_test(int flags); -extern int codec_post_test(int flags); - -extern int sysmon_init_f(void); - -extern void sysmon_reloc(void); - -extern int flash_post_test(int flags); -extern int led_post_test(int flags); -extern int button_post_test(int flags); - -struct post_test post_list[] = { -#if CONFIG_POST & CONFIG_SYS_POST_CACHE - { - "Cache test", - "cache", - "This test verifies the CPU cache operation.", - POST_RAM | POST_ALWAYS, - &cache_post_test, - NULL, - NULL, - CONFIG_SYS_POST_CACHE}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG - { - "Watchdog timer test", - "watchdog", - "This test checks the watchdog timer.", - POST_RAM | POST_POWERON | POST_SLOWTEST | POST_MANUAL | POST_REBOOT, - &watchdog_post_test, - NULL, - NULL, - CONFIG_SYS_POST_WATCHDOG}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_I2C - { - "I2C test", - "i2c", - "This test verifies the I2C operation.", - POST_RAM | POST_ALWAYS, - &i2c_post_test, - NULL, - NULL, - CONFIG_SYS_POST_I2C}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_RTC - { - "RTC test", - "rtc", - "This test verifies the RTC operation.", - POST_RAM | POST_SLOWTEST | POST_MANUAL, - &rtc_post_test, - NULL, - NULL, - CONFIG_SYS_POST_RTC}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_MEMORY - { - "Memory test", - "memory", - "This test checks RAM.", - POST_ROM | POST_POWERON | POST_SLOWTEST | POST_PREREL, - &memory_post_test, - NULL, - NULL, - CONFIG_SYS_POST_MEMORY}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_CPU - { - "CPU test", - "cpu", - "This test verifies the arithmetic logic unit of" " CPU.", - POST_RAM | POST_ALWAYS, - &cpu_post_test, - NULL, - NULL, - CONFIG_SYS_POST_CPU}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_UART - { - "UART test", - "uart", - "This test verifies the UART operation.", - POST_RAM | POST_SLOWTEST | POST_MANUAL, - &uart_post_test, - NULL, - NULL, - CONFIG_SYS_POST_UART}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_ETHER - { - "ETHERNET test", - "ethernet", - "This test verifies the ETHERNET operation.", - POST_RAM | POST_ALWAYS | POST_MANUAL, - ðer_post_test, - NULL, - NULL, - CONFIG_SYS_POST_ETHER}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_SPI - { - "SPI test", - "spi", - "This test verifies the SPI operation.", - POST_RAM | POST_ALWAYS | POST_MANUAL, - &spi_post_test, - NULL, - NULL, - CONFIG_SYS_POST_SPI}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_USB - { - "USB test", - "usb", - "This test verifies the USB operation.", - POST_RAM | POST_ALWAYS | POST_MANUAL, - &usb_post_test, - NULL, - NULL, - CONFIG_SYS_POST_USB}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_SPR - { - "SPR test", - "spr", - "This test checks SPR contents.", - POST_ROM | POST_ALWAYS | POST_PREREL, - &spr_post_test, - NULL, - NULL, - CONFIG_SYS_POST_SPR}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_SYSMON - { - "SYSMON test", - "sysmon", - "This test monitors system hardware.", - POST_RAM | POST_ALWAYS, - &sysmon_post_test, - &sysmon_init_f, - &sysmon_reloc, - CONFIG_SYS_POST_SYSMON}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_DSP - { - "DSP test", - "dsp", - "This test checks any connected DSP(s).", - POST_RAM | POST_MANUAL, - &dsp_post_test, - NULL, - NULL, - CONFIG_SYS_POST_DSP}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_CODEC - { - "CODEC test", - "codec", - "This test checks any connected codec(s).", - POST_RAM | POST_MANUAL, - &codec_post_test, - NULL, - NULL, - CONFIG_SYS_POST_CODEC}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_FLASH - { - "FLASH test", - "flash", - "This test checks flash.", - POST_RAM | POST_ALWAYS | POST_MANUAL, - &flash_post_test, - NULL, - NULL, - CONFIG_SYS_POST_FLASH}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_LED - { - "LED test", - "LED", - "This test checks LED ", - POST_RAM | POST_ALWAYS | POST_MANUAL, - &led_post_test, - NULL, - NULL, - CONFIG_SYS_POST_LED}, -#endif -#if CONFIG_POST & CONFIG_SYS_POST_BUTTON - { - "Button test", - "button", - "This test checks Button ", - POST_RAM | POST_ALWAYS | POST_MANUAL, - &button_post_test, - NULL, - NULL, - CONFIG_SYS_POST_BUTTON}, -#endif - -}; - -unsigned int post_list_size = sizeof(post_list) / sizeof(struct post_test); diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile index 2b9328b..49e4414 100644 --- a/board/bf537-stamp/Makefile +++ b/board/bf537-stamp/Makefile @@ -31,7 +31,7 @@ LIB = $(obj)lib$(BOARD).o COBJS-y := $(BOARD).o COBJS-$(CONFIG_BFIN_IDE) += ide-cf.o -COBJS-$(CONFIG_HAS_POST) += post.o post-memory.o +COBJS-$(CONFIG_HAS_POST) += post-memory.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/bf537-stamp/post-memory.c b/board/bf537-stamp/post-memory.c index 49022dc..2dea92f 100644 --- a/board/bf537-stamp/post-memory.c +++ b/board/bf537-stamp/post-memory.c @@ -13,7 +13,6 @@ #define SCLK_NUM 3 void post_out_buff(char *buff); -int post_key_pressed(void); void post_init_pll(int mult, int div); int post_init_sdram(int sclk); void post_init_uart(int sclk); @@ -52,7 +51,7 @@ int memory_post_test(int flags) sclk_temp -= CONFIG_SCLK_DIV; sclk = sclk * 1000000; post_init_uart(sclk); - if (post_key_pressed() == 0) + if (post_hotkeys_pressed() == 0) return 0; for (m = 0; m < CCLK_NUM; m++) { @@ -130,66 +129,6 @@ void post_out_buff(char *buff) ; } -/* Using sw10-PF5 as the hotkey */ -#define KEY_LOOP 0x80000 -#define KEY_DELAY 0x80 -int post_key_pressed(void) -{ - int i, n; - unsigned short value; - - bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~PF5); - bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() & ~PF5); - bfin_write_PORTFIO_INEN(bfin_read_PORTFIO_INEN() | PF5); - SSYNC(); - - post_out_buff("########Press SW10 to enter Memory POST########: 3\0"); - for (i = 0; i < KEY_LOOP; i++) { - value = bfin_read_PORTFIO() & PF5; - if (bfin_read_UART0_RBR() == 0x0D) { - value = 0; - goto key_pressed; - } - if (value != 0) - goto key_pressed; - for (n = 0; n < KEY_DELAY; n++) - asm("nop"); - } - post_out_buff("\b2\0"); - - for (i = 0; i < KEY_LOOP; i++) { - value = bfin_read_PORTFIO() & PF5; - if (bfin_read_UART0_RBR() == 0x0D) { - value = 0; - goto key_pressed; - } - if (value != 0) - goto key_pressed; - for (n = 0; n < KEY_DELAY; n++) - asm("nop"); - } - post_out_buff("\b1\0"); - - for (i = 0; i < KEY_LOOP; i++) { - value = bfin_read_PORTFIO() & PF5; - if (bfin_read_UART0_RBR() == 0x0D) { - value = 0; - goto key_pressed; - } - if (value != 0) - goto key_pressed; - for (n = 0; n < KEY_DELAY; n++) - asm("nop"); - } - key_pressed: - post_out_buff("\b0"); - post_out_buff("\n\r\0"); - if (value == 0) - return 0; - post_out_buff("Hotkey has been pressed, Enter POST . . . . . .\n\r\0"); - return 1; -} - void post_init_pll(int mult, int div) { diff --git a/board/bf537-stamp/post.c b/board/bf537-stamp/post.c deleted file mode 100644 index 60eed5f..0000000 --- a/board/bf537-stamp/post.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * BF537-STAMP POST code - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Copyright (c) 2005-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <config.h> -#include <command.h> -#include <asm/blackfin.h> -#include <asm/gpio.h> - -/* Using sw10-PF5 as the hotkey */ -int post_hotkeys_pressed(void) -{ - int delay = 3; - int i; - unsigned short value; - - gpio_request(GPIO_PF5, "post"); - gpio_direction_input(GPIO_PF5); - - printf("########Press SW10 to enter Memory POST########: %2d ", delay); - while (delay--) { - for (i = 0; i < 100; i++) { - value = gpio_get_value(GPIO_PF5); - if (value != 0) { - break; - } - udelay(10000); - } - printf("\b\b\b%2d ", delay); - } - printf("\b\b\b 0"); - printf("\n"); - if (value == 0) - return 0; - else { - printf("Hotkey has been pressed, Enter POST . . . . . .\n"); - return 1; - } - - gpio_free(GPIO_PF5); -} - -int uart_post_test(int flags) -{ - return 0; -} - -#define BLOCK_SIZE 0x10000 -#define VERIFY_ADDR 0x2000000 -extern int erase_block_flash(int); -extern int write_data(long lStart, long lCount, uchar * pnData); -int flash_post_test(int flags) -{ - unsigned short *pbuf, *temp; - int offset, n, i; - int value = 0; - int result = 0; - printf("\n"); - pbuf = (unsigned short *)VERIFY_ADDR; - temp = pbuf; - for (n = FLASH_START_POST_BLOCK; n < FLASH_END_POST_BLOCK; n++) { - offset = (n - 7) * BLOCK_SIZE; - printf("--------Erase block:%2d..", n); - erase_block_flash(n); - printf("OK\r"); - printf("--------Program block:%2d...", n); - write_data(CONFIG_SYS_FLASH_BASE + offset, BLOCK_SIZE, pbuf); - printf("OK\r"); - printf("--------Verify block:%2d...", n); - for (i = 0; i < BLOCK_SIZE; i += 2) { - if (*(unsigned short *)(CONFIG_SYS_FLASH_BASE + offset + i) != - *temp++) { - value = 1; - result = 1; - } - } - if (value) - printf("failed\n"); - else - printf("OK %3d%%\r", - (int)( - (n + 1 - - FLASH_START_POST_BLOCK) * - 100 / (FLASH_END_POST_BLOCK - - FLASH_START_POST_BLOCK))); - - temp = pbuf; - value = 0; - } - printf("\n"); - if (result) - return -1; - else - return 0; -} - -/**************************************************** - * LED1 ---- PF6 LED2 ---- PF7 * - * LED3 ---- PF8 LED4 ---- PF9 * - * LED5 ---- PF10 LED6 ---- PF11 * - ****************************************************/ -int led_post_test(int flags) -{ - unsigned int leds[] = { - GPIO_PF6, GPIO_PF7, GPIO_PF8, - GPIO_PF9, GPIO_PF10, GPIO_PF11, - }; - int i; - - for (i = 0; i < ARRAY_SIZE(leds); ++i) { - gpio_request(leds[i], "post"); - gpio_direction_output(leds[i], 0); - - printf("LED%i on", i + 1); - gpio_set_value(leds[i], 1); - udelay(1000000); - printf("\b\b\b\b\b\b\b"); - - gpio_free(leds[i]); - } - - return 0; -} - -/************************************************ - * SW10 ---- PF5 SW11 ---- PF4 * - * SW12 ---- PF3 SW13 ---- PF2 * - ************************************************/ -int button_post_test(int flags) -{ - unsigned int buttons[] = { - GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5, - }; - unsigned int sws[] = { 13, 12, 11, 10, }; - int i, delay = 5; - unsigned short value = 0; - int result = 0; - - for (i = 0; i < ARRAY_SIZE(buttons); ++i) { - gpio_request(buttons[i], "post"); - gpio_direction_input(buttons[i]); - - delay = 5; - printf("\n--------Press SW%i: %2d ", sws[i], delay); - while (delay--) { - for (i = 0; i < 100; i++) { - value = gpio_get_value(buttons[i]); - if (value != 0) - break; - udelay(10000); - } - printf("\b\b\b%2d ", delay); - } - if (value != 0) - puts("\b\bOK"); - else { - result = -1; - puts("\b\bfailed"); - } - - gpio_free(buttons[i]); - } - - puts("\n"); - - return result; -} diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index da14a4f..1a7273b 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -257,8 +257,15 @@ /* Define if want to do post memory test */ #undef CONFIG_POST #ifdef CONFIG_POST -#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */ -#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */ +#define CONFIG_SYS_POST_HOTKEYS_GPIO GPIO_PF5 +#define CONFIG_POST_BSPEC1_GPIO_LEDS \ + GPIO_PF6, GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11, +#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \ + GPIO_PF5, GPIO_PF4, GPIO_PF3, GPIO_PF2, +#define CONFIG_POST_BSPEC2_GPIO_NAMES \ + 10, 11, 12, 13, +#define CONFIG_SYS_POST_FLASH_START 11 +#define CONFIG_SYS_POST_FLASH_END 71 #endif /* These are for board tests */ diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index 3550fd3..4862baa 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -197,8 +197,14 @@ /* Define if want to do post memory test */ #undef CONFIG_POST #ifdef CONFIG_POST -#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */ -#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */ +#define CONFIG_POST_BSPEC1_GPIO_LEDS \ + GPIO_PG6, GPIO_PG7, GPIO_PG8, GPIO_PG9, GPIO_PG10, GPIO_PG11, +#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \ + GPIO_PB8, GPIO_PB9, GPIO_PB10, GPIO_PB11 +#define CONFIG_POST_BSPEC2_GPIO_NAMES \ + 13, 12, 11, 10, +#define CONFIG_SYS_POST_FLASH_START 10 +#define CONFIG_SYS_POST_FLASH_END 127 #endif diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 57d9b97..bae2d76 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -55,7 +55,6 @@ # endif # ifdef CONFIG_POST # define CONFIG_CMD_DIAG -# define CONFIG_POST_ALT_LIST # endif # ifdef CONFIG_RTC_BFIN # define CONFIG_CMD_DATE diff --git a/post/tests.c b/post/tests.c index bfb9cb5..725f80b 100644 --- a/post/tests.c +++ b/post/tests.c @@ -55,6 +55,8 @@ extern int fpga_post_test (int flags); extern int lwmon5_watchdog_post_test(int flags); extern int sysmon1_post_test(int flags); extern int coprocessor_post_test(int flags); +extern int led_post_test(int flags); +extern int button_post_test(int flags); extern int sysmon_init_f (void); |