diff options
| -rw-r--r-- | Makefile | 23 | ||||
| -rw-r--r-- | board/m501sk/Makefile | 2 | ||||
| -rw-r--r-- | board/m501sk/memsetup.S | 200 | ||||
| -rw-r--r-- | cpu/arm920t/at91rm9200/lowlevel_init.S | 158 | ||||
| -rw-r--r-- | doc/README.at91 | 2 | ||||
| -rw-r--r-- | include/asm-arm/arch-at91rm9200/AT91RM9200.h | 27 | ||||
| -rw-r--r-- | include/configs/at91rm9200dk.h | 46 | ||||
| -rw-r--r-- | include/configs/cmc_pu2.h | 46 | ||||
| -rw-r--r-- | include/configs/csb637.h | 46 | ||||
| -rw-r--r-- | include/configs/m501sk.h | 33 | ||||
| -rw-r--r-- | include/configs/mp2usb.h | 46 |
11 files changed, 241 insertions, 388 deletions
@@ -348,7 +348,7 @@ $(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(OBJS): depend $(obj)include/autoconf.mk $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@)) -$(LIBS): depend $(obj)include/autoconf.mk +$(LIBS): depend $(obj)include/autoconf.mk $(SUBDIRS) $(MAKE) -C $(dir $(subst $(obj),,$@)) $(LIBBOARD): depend $(LIBS) $(obj)include/autoconf.mk @@ -2602,6 +2602,7 @@ at91sam9260ek_nandflash_config \ at91sam9260ek_dataflash_cs0_config \ at91sam9260ek_dataflash_cs1_config \ at91sam9260ek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2614,10 +2615,28 @@ at91sam9260ek_config : unconfig fi; @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 +at91sam9xeek_nandflash_config \ +at91sam9xeek_dataflash_cs0_config \ +at91sam9xeek_dataflash_cs1_config \ +at91sam9xeek_config : unconfig + @mkdir -p $(obj)include + @if [ "$(findstring _nandflash,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NAND FLASH" ; \ + elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ + else \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ + fi; + @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9 + at91sam9261ek_nandflash_config \ at91sam9261ek_dataflash_cs0_config \ at91sam9261ek_dataflash_cs3_config \ at91sam9261ek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2634,6 +2653,7 @@ at91sam9263ek_nandflash_config \ at91sam9263ek_dataflash_config \ at91sam9263ek_dataflash_cs0_config \ at91sam9263ek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2647,6 +2667,7 @@ at91sam9rlek_nandflash_config \ at91sam9rlek_dataflash_config \ at91sam9rlek_dataflash_cs0_config \ at91sam9rlek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ diff --git a/board/m501sk/Makefile b/board/m501sk/Makefile index c562c60..aec3d1c 100644 --- a/board/m501sk/Makefile +++ b/board/m501sk/Makefile @@ -27,8 +27,6 @@ LIB = $(obj)lib$(BOARD).a COBJS := m501sk.o eeprom.o -SOBJS := memsetup.o - SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/board/m501sk/memsetup.S b/board/m501sk/memsetup.S deleted file mode 100644 index 6aea723..0000000 --- a/board/m501sk/memsetup.S +++ /dev/null @@ -1,200 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * - * Modified for the at91rm9200dk board by - * (C) Copyright 2004 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> - -#ifdef CONFIG_BOOTBINFUNC -/* - * some parameters for the board - * - * This is based on rm9200dk.cfg for the BDI2000 from ABATRON which in - * turn is based on the boot.bin code from ATMEL - * - */ - -/* flash */ -#define MC_PUIA 0xFFFFFF10 -#define MC_PUIA_VAL 0x00000000 -#define MC_PUP 0xFFFFFF50 -#define MC_PUP_VAL 0x00000000 -#define MC_PUER 0xFFFFFF54 -#define MC_PUER_VAL 0x00000000 -#define MC_ASR 0xFFFFFF04 -#define MC_ASR_VAL 0x00000000 -#define MC_AASR 0xFFFFFF08 -#define MC_AASR_VAL 0x00000000 -#define EBI_CFGR 0xFFFFFF64 -#define EBI_CFGR_VAL 0x00000000 -#define SMC_CSR0 0xFFFFFF70 -#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define PLLAR 0xFFFFFC28 -#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -#define PLLBR 0xFFFFFC2C -#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -#define MCKR 0xFFFFFC30 -/* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ -#define MCKR_VAL 0x00000202 - -/* sdram */ -#define PIOC_ASR 0xFFFFF870 -#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as Perip (D16/D31) */ -#define PIOC_BSR 0xFFFFF874 -#define PIOC_BSR_VAL 0x00000000 -#define PIOC_PDR 0xFFFFF804 -#define PIOC_PDR_VAL 0xFFFF0000 -#define EBI_CSA 0xFFFFFF60 -#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define SDRC_CR 0xFFFFFF98 -#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */ -#define SDRAM 0x20000000 /* address of the SDRAM */ -#define SDRAM1 0x20000080 /* address of the SDRAM */ -#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define SDRC_MR 0xFFFFFF90 -#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define SDRC_MR_VAL1 0x00000004 /* refresh */ -#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define SDRC_TR 0xFFFFFF94 -#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ - -_TEXT_BASE: - .word TEXT_BASE - -.globl lowlevelinit -lowlevelinit: - /* memory control configuration */ - /* this isn't very elegant, but what the heck */ - ldr r0, =SMRDATA - ldr r1, _TEXT_BASE - sub r0, r0, r1 - add r2, r0, #80 -0: - /* the address */ - ldr r1, [r0], #4 - /* the value */ - ldr r3, [r0], #4 - str r3, [r1] - cmp r2, r0 - bne 0b - /* delay - this is all done by guess */ - ldr r0, =0x00010000 -1: - subs r0, r0, #1 - bhi 1b - ldr r0, =SMRDATA1 - ldr r1, _TEXT_BASE - sub r0, r0, r1 - add r2, r0, #176 -2: - /* the address */ - ldr r1, [r0], #4 - /* the value */ - ldr r3, [r0], #4 - str r3, [r1] - cmp r2, r0 - bne 2b - - /* everything is fine now */ - mov pc, lr - - .ltorg - -SMRDATA: - .word MC_PUIA - .word MC_PUIA_VAL - .word MC_PUP - .word MC_PUP_VAL - .word MC_PUER - .word MC_PUER_VAL - .word MC_ASR - .word MC_ASR_VAL - .word MC_AASR - .word MC_AASR_VAL - .word EBI_CFGR - .word EBI_CFGR_VAL - .word SMC_CSR0 - .word SMC_CSR0_VAL - .word PLLAR - .word PLLAR_VAL - .word PLLBR - .word PLLBR_VAL - .word MCKR - .word MCKR_VAL - /* SMRDATA is 80 bytes long */ - /* here there's a delay of 100 */ -SMRDATA1: - .word PIOC_ASR - .word PIOC_ASR_VAL - .word PIOC_BSR - .word PIOC_BSR_VAL - .word PIOC_PDR - .word PIOC_PDR_VAL - .word EBI_CSA - .word EBI_CSA_VAL - .word SDRC_CR - .word SDRC_CR_VAL - .word SDRC_MR - .word SDRC_MR_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL1 - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL2 - .word SDRAM1 - .word SDRAM_VAL - .word SDRC_TR - .word SDRC_TR_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL3 - .word SDRAM - .word SDRAM_VAL - /* SMRDATA1 is 176 bytes long */ -#endif /* CONFIG_BOOTBINFUNC */ diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S index 66b07da..0913284 100644 --- a/cpu/arm920t/at91rm9200/lowlevel_init.S +++ b/cpu/arm920t/at91rm9200/lowlevel_init.S @@ -38,33 +38,7 @@ * turn is based on the boot.bin code from ATMEL * */ - -/* flash */ -#define MC_PUIA 0xFFFFFF10 -#define MC_PUP 0xFFFFFF50 -#define MC_PUER 0xFFFFFF54 -#define MC_ASR 0xFFFFFF04 -#define MC_AASR 0xFFFFFF08 -#define EBI_CFGR 0xFFFFFF64 -#define SMC_CSR0 0xFFFFFF70 - -/* clocks */ -#define PLLAR 0xFFFFFC28 -#define PLLBR 0xFFFFFC2C -#define MCKR 0xFFFFFC30 - -#define AT91C_BASE_CKGR 0xFFFFFC20 -#define CKGR_MOR 0 - -/* sdram */ -#define PIOC_ASR 0xFFFFF870 -#define PIOC_BSR 0xFFFFF874 -#define PIOC_PDR 0xFFFFF804 -#define EBI_CSA 0xFFFFFF60 -#define SDRC_CR 0xFFFFFF98 -#define SDRC_MR 0xFFFFFF90 -#define SDRC_TR 0xFFFFFF94 - +#include <asm/arch/AT91RM9200.h> _MTEXT_BASE: #undef START_FROM_MEM @@ -84,7 +58,7 @@ lowlevel_init: #else ldr r0, =0x0000FF00 /* Disable main oscillator, OSCOUNT = 0xFF */ #endif - str r0, [r1, #CKGR_MOR] + str r0, [r1, #AT91C_CKGR_MOR] /* Add loop to compensate Main Oscillator startup time */ ldr r0, =0x00000010 LoopOsc: @@ -134,72 +108,72 @@ LoopOsc: .ltorg SMRDATA: - .word MC_PUIA - .word MC_PUIA_VAL - .word MC_PUP - .word MC_PUP_VAL - .word MC_PUER - .word MC_PUER_VAL - .word MC_ASR - .word MC_ASR_VAL - .word MC_AASR - .word MC_AASR_VAL - .word EBI_CFGR - .word EBI_CFGR_VAL - .word SMC_CSR0 - .word SMC_CSR0_VAL - .word PLLAR - .word PLLAR_VAL - .word PLLBR - .word PLLBR_VAL - .word MCKR - .word MCKR_VAL + .word AT91C_MC_PUIA + .word CONFIG_SYS_MC_PUIA_VAL + .word AT91C_MC_PUP + .word CONFIG_SYS_MC_PUP_VAL + .word AT91C_MC_PUER + .word CONFIG_SYS_MC_PUER_VAL + .word AT91C_MC_ASR + .word CONFIG_SYS_MC_ASR_VAL + .word AT91C_MC_AASR + .word CONFIG_SYS_MC_AASR_VAL + .word AT91C_EBI_CFGR + .word CONFIG_SYS_EBI_CFGR_VAL + .word AT91C_SMC_CSR0 + .word CONFIG_SYS_SMC_CSR0_VAL + .word AT91C_PLLAR + .word CONFIG_SYS_PLLAR_VAL + .word AT91C_PLLBR + .word CONFIG_SYS_PLLBR_VAL + .word AT91C_MCKR + .word CONFIG_SYS_MCKR_VAL /* SMRDATA is 80 bytes long */ /* here there's a delay of 100 */ SMRDATA1: - .word PIOC_ASR - .word PIOC_ASR_VAL - .word PIOC_BSR - .word PIOC_BSR_VAL - .word PIOC_PDR - .word PIOC_PDR_VAL - .word EBI_CSA - .word EBI_CSA_VAL - .word SDRC_CR - .word SDRC_CR_VAL - .word SDRC_MR - .word SDRC_MR_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL1 - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL2 - .word SDRAM1 - .word SDRAM_VAL - .word SDRC_TR - .word SDRC_TR_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL3 - .word SDRAM - .word SDRAM_VAL + .word AT91C_PIOC_ASR + .word CONFIG_SYS_PIOC_ASR_VAL + .word AT91C_PIOC_BSR + .word CONFIG_SYS_PIOC_BSR_VAL + .word AT91C_PIOC_PDR + .word CONFIG_SYS_PIOC_PDR_VAL + .word AT91C_EBI_CSA + .word CONFIG_SYS_EBI_CSA_VAL + .word AT91C_SDRC_CR + .word CONFIG_SYS_SDRC_CR_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL1 + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL2 + .word CONFIG_SYS_SDRAM1 + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_TR + .word CONFIG_SYS_SDRC_TR_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL3 + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL /* SMRDATA1 is 176 bytes long */ #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/doc/README.at91 b/doc/README.at91 index 838769a..4e3928a 100644 --- a/doc/README.at91 +++ b/doc/README.at91 @@ -3,7 +3,7 @@ Atmel AT91 Evaluation kits http://atmel.com/dyn/products/tools.asp?family_id=605#1443 ------------------------------------------------------------------------------ -AT91SAM9260EK +AT91SAM9260EK & AT91SAM9XEEK ------------------------------------------------------------------------------ Memory map diff --git a/include/asm-arm/arch-at91rm9200/AT91RM9200.h b/include/asm-arm/arch-at91rm9200/AT91RM9200.h index 95db017..00bae1c 100644 --- a/include/asm-arm/arch-at91rm9200/AT91RM9200.h +++ b/include/asm-arm/arch-at91rm9200/AT91RM9200.h @@ -781,5 +781,32 @@ typedef struct _AT91S_PDC #define AT91C_PIOB_ODR ((AT91_REG *) 0xFFFFF614) /* (PIOB) Output Disable Registerr */ #define AT91C_PIOB_PDSR ((AT91_REG *) 0xFFFFF63C) /* (PIOB) Pin Data Status Register */ +#else +/* flash */ +#define AT91C_MC_PUIA 0xFFFFFF10 +#define AT91C_MC_PUP 0xFFFFFF50 +#define AT91C_MC_PUER 0xFFFFFF54 +#define AT91C_MC_ASR 0xFFFFFF04 +#define AT91C_MC_AASR 0xFFFFFF08 +#define AT91C_EBI_CFGR 0xFFFFFF64 +#define AT91C_SMC_CSR0 0xFFFFFF70 + +/* clocks */ +#define AT91C_PLLAR 0xFFFFFC28 +#define AT91C_PLLBR 0xFFFFFC2C +#define AT91C_MCKR 0xFFFFFC30 + +#define AT91C_BASE_CKGR 0xFFFFFC20 +#define AT91C_CKGR_MOR 0 + +/* sdram */ +#define AT91C_PIOC_ASR 0xFFFFF870 +#define AT91C_PIOC_BSR 0xFFFFF874 +#define AT91C_PIOC_PDR 0xFFFFF804 +#define AT91C_EBI_CSA 0xFFFFFF60 +#define AT91C_SDRC_CR 0xFFFFFF98 +#define AT91C_SDRC_MR 0xFFFFFF90 +#define AT91C_SDRC_TR 0xFFFFFF94 + #endif /* __ASSEMBLY__ */ #endif /* AT91RM9200_H */ diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 746f0ef..c7e83cc 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -45,33 +45,33 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 /* flash */ -#define MC_PUIA_VAL 0x00000000 -#define MC_PUP_VAL 0x00000000 -#define MC_PUER_VAL 0x00000000 -#define MC_ASR_VAL 0x00000000 -#define MC_AASR_VAL 0x00000000 -#define EBI_CFGR_VAL 0x00000000 -#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ /* clocks */ -#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ +#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ +#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ /* sdram */ -#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define PIOC_BSR_VAL 0x00000000 -#define PIOC_PDR_VAL 0xFFFF0000 -#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */ -#define SDRAM 0x20000000 /* address of the SDRAM */ -#define SDRAM1 0x20000080 /* address of the SDRAM */ -#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define SDRC_MR_VAL1 0x00000004 /* refresh */ -#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ #else #define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index cdd308d..d9acb47 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -44,33 +44,33 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 /* flash */ -#define MC_PUIA_VAL 0x00000000 -#define MC_PUP_VAL 0x00000000 -#define MC_PUER_VAL 0x00000000 -#define MC_ASR_VAL 0x00000000 -#define MC_AASR_VAL 0x00000000 -#define EBI_CFGR_VAL 0x00000000 -#define SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */ /* clocks */ -#define PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */ -#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */ +#define CONFIG_SYS_PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ +#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */ /* sdram */ -#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define PIOC_BSR_VAL 0x00000000 -#define PIOC_PDR_VAL 0xFFFF0000 -#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define SDRC_CR_VAL 0x3399c1d4 /* set up the SDRAM */ -#define SDRAM 0x20000000 /* address of the SDRAM */ -#define SDRAM1 0x20000080 /* address of the SDRAM */ -#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define SDRC_MR_VAL1 0x00000004 /* refresh */ -#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ #else #define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/include/configs/csb637.h b/include/configs/csb637.h index 682db44..2df77cf 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -45,33 +45,33 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 /* flash */ -#define MC_PUIA_VAL 0x00000000 -#define MC_PUP_VAL 0x00000000 -#define MC_PUER_VAL 0x00000000 -#define MC_ASR_VAL 0x00000000 -#define MC_AASR_VAL 0x00000000 -#define EBI_CFGR_VAL 0x00000000 -#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ /* clocks */ -#define PLLAR_VAL 0x2031BE01 /* 184.320000 MHz for PCK */ -#define PLLBR_VAL 0x128A3E19 /* 47.996928 MHz (divider by 2 for USB) */ -#define MCKR_VAL 0x00000302 /* PCK/4 = MCK Master Clock = 46.080000 MHz from PLLA */ +#define CONFIG_SYS_PLLAR_VAL 0x2031BE01 /* 184.320000 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x128A3E19 /* 47.996928 MHz (divider by 2 for USB) */ +#define CONFIG_SYS_MCKR_VAL 0x00000302 /* PCK/4 = MCK Master Clock = 46.080000 MHz from PLLA */ /* sdram */ -#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define PIOC_BSR_VAL 0x00000000 -#define PIOC_PDR_VAL 0xFFFF0000 -#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define SDRC_CR_VAL 0x21914159 /* set up the SDRAM */ -#define SDRAM 0x20000000 /* address of the SDRAM */ -#define SDRAM1 0x20000080 /* address of the SDRAM */ -#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define SDRC_MR_VAL1 0x00000004 /* refresh */ -#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x21914159 /* set up the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ #else #define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h index f09214d..eab37df 100644 --- a/include/configs/m501sk.h +++ b/include/configs/m501sk.h @@ -41,6 +41,39 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_MENUPROMPT "." +/* + * LowLevel Init + */ +#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 +/* flash */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ + +/* clocks */ +#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ +/* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ +#define CONFIG_SYS_MCKR_VAL 0x00000202 + +/* sdram */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ /* * Size of malloc() pool diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index cbbdb0c..fb10616 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -49,33 +49,33 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 /* flash */ -#define MC_PUIA_VAL 0x00000000 -#define MC_PUP_VAL 0x00000000 -#define MC_PUER_VAL 0x00000000 -#define MC_ASR_VAL 0x00000000 -#define MC_AASR_VAL 0x00000000 -#define EBI_CFGR_VAL 0x00000000 -#define SMC_CSR0_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */ /* clocks */ -#define PLLAR_VAL 0x20263E04 /* 180 MHz for PCK */ -#define PLLBR_VAL 0x1048bE0E /* 48 MHz (divider by 2 for USB) */ -#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 60MHz from PLLA */ +#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 180 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x1048bE0E /* 48 MHz (divider by 2 for USB) */ +#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 60MHz from PLLA */ /* sdram */ -#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define PIOC_BSR_VAL 0x00000000 -#define PIOC_PDR_VAL 0xFFFF0000 -#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define SDRC_CR_VAL 0x3211295A /* set up the SDRAM */ -#define SDRAM 0x20000000 /* address of the SDRAM */ -#define SDRAM1 0x20000020 /* address of the SDRAM */ -#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define SDRC_MR_VAL1 0x00000004 /* refresh */ -#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x3211295A /* set up the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000020 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ #else #define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ |