summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG752
-rw-r--r--MAINTAINERS2
-rw-r--r--board/ms7722se/Makefile2
-rw-r--r--board/ms7722se/config.mk1
-rw-r--r--board/ms7722se/lowlevel_init.S22
-rw-r--r--board/ms7722se/ms7722se.c3
-rw-r--r--board/ms7722se/u-boot.lds11
-rw-r--r--board/ms7750se/lowlevel_init.S9
-rw-r--r--board/ms7750se/ms7750se.c2
-rw-r--r--board/ms7750se/u-boot.lds11
-rw-r--r--cpu/sh4/cache.c48
-rw-r--r--cpu/sh4/config.mk2
-rw-r--r--cpu/sh4/cpu.c2
-rw-r--r--cpu/sh4/interrupts.c7
-rw-r--r--cpu/sh4/start.S19
-rw-r--r--cpu/sh4/watchdog.c6
-rw-r--r--doc/README.marubun-pcmcia34
-rw-r--r--doc/README.sh19
-rw-r--r--drivers/pcmcia/marubun_pcmcia.c12
-rw-r--r--drivers/serial/serial_sh.c8
-rw-r--r--examples/stubs.c24
-rw-r--r--include/asm-sh/bitops.h67
-rw-r--r--include/asm-sh/byteorder.h1
-rw-r--r--include/asm-sh/cpu_sh7722.h18
-rw-r--r--include/asm-sh/cpu_sh7750.h2
-rw-r--r--include/asm-sh/posix_types.h2
-rw-r--r--include/asm-sh/u-boot.h2
-rw-r--r--include/configs/ms7722se.h11
-rw-r--r--include/configs/ms7750se.h6
-rw-r--r--lib_sh/Makefile2
-rw-r--r--lib_sh/board.c4
-rw-r--r--lib_sh/sh_linux.c3
32 files changed, 917 insertions, 197 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 015a4ac..ef5c7ea 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,687 @@
+commit 467bcee11fe26ad422f2de971aa70866079870f2
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 15:36:18 2007 +0100
+
+ cfi_flash: Add manufacturer-specific fixups
+
+ Run fixups based on the JEDEC manufacturer ID independent of the
+ command set ID.
+
+ This changes current behaviour: Previously, geometry reversal for AMD
+ chips were done based on the command set ID, while they are now done
+ based on the JEDEC manufacturer and device ID.
+
+ Also add fixup for top-boot Atmel chips. A fixup is needed for
+ AT49BV6416(T) too, but since u-boot currently only reads the low byte
+ of the device ID, there's no way to tell it apart from AT49BV642D,
+ which should not have this fixup. Since AT49BV642D support is
+ necessary to get ATNGW100 board support into mainline, I've commented
+ out the fixup for now.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 15:36:17 2007 +0100
+
+ cfi_flash: Add cmdset-specific init functions
+
+ Move things like reading JEDEC IDs and fixing up geometry reversal
+ into separate functions. The geometry reversal fixup is now performed
+ by altering the qry structure directly, which makes the sector init
+ code slightly cleaner.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit e23741f4a6d8047520ef0d4971762749b3587d32
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 15:36:16 2007 +0100
+
+ cfi_flash: Read whole QRY structure in one go
+
+ Read out the whole CFI Standard Query structure after successful cfi
+ identification. This allows subsequent code to access this information
+ directly without having to go through flash_read_uchar() and friends.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Dec 17 11:02:44 2007 +0100
+
+ AVR32: Fix logic inversion in disable_interrupts()
+
+ disable_interrupts() should return nonzero if interrupts were
+ _enabled_ before, not disabled.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit acac475212cbedb17b321a363a1c878e2b47b37f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 16:51:22 2007 +0100
+
+ AVR32: Enable interrupts at bootup
+
+ The timer code depends on the timer interrupt to keep track of the
+ upper 32 bits of the cycle counter. This obviously doesn't work when
+ interrupts are disabled the whole time.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9570bcd87f4db255514f43b6701746c412f8fef0
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 15 10:03:45 2007 +0100
+
+ AVR32: Fix wrong pin setup for USART3
+
+ As reported by Gerhard Berghofer:
+
+ in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
+ instead of PB18 and PB19.
+
+ which is obviously correct. There's currently no code that uses
+ USART3, but custom boards may run into problems.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 1 12:44:20 2007 +0100
+
+ README: Remove ATSTK1000 daughterboard list
+
+ As noted by Kim Phillips, these lists tend to become out of date.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit c81cbbad21cb0ae983e2e796211202234cdc8be2
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Tue Oct 30 14:56:36 2007 +0100
+
+ Add ATSTK100[234] to MAINTAINERS
+
+ Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
+ "mother". Also update the entry for ATSTK1000 to be not only about the
+ AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 64ff2357b1727213803591813dbc779c924bf772
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:02:54 2007 +0100
+
+ AVR32: Add support for the ATSTK1004 board
+
+ ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
+ which is a derivative of AT32AP7000.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 667568db157f374b85abd7e03596ddd1f0b25681
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:02:54 2007 +0100
+
+ AVR32: Add support for the ATSTK1003 board
+
+ ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
+ which is a derivative of AT32AP7000.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 5fee84a794a51ec830548cda485a770efb018b92
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:23:33 2007 +0100
+
+ AVR32: Make some AT32AP700x peripherals optional
+
+ Add a chip-features file providing definitions of the form
+
+ AT32AP700x_CHIP_HAS_<peripheral>
+
+ to indicate the availability of the given peripheral on the currently
+ selected chip.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 36f28f8a9605ee5dcfa330482cfc62171261af97
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:09:56 2007 +0100
+
+ AVR32: Rename at32ap7000 -> at32ap700x
+
+ The SoC-specific code for all the AT32AP700x CPUs is practically
+ identical; the only difference is that some chips have less features
+ than others. By doing this rename, we can add support for the AP7000
+ derivatives simply by making some features conditional.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Jun 29 18:22:34 2007 +0200
+
+ atmel_mci: Show SR when block read fails
+
+ Show controller status as well as card status when an error occurs
+ during block read.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 12d30aa79779c2aa7a998bbae4c075f822a53004
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:34 2007 +0100
+
+ cfi_flash: Use map_physmem() and unmap_physmem()
+
+ Use map_physmem() and unmap_physmem() to convert from physical to
+ virtual addresses. This gives the arch a chance to provide an uncached
+ mapping for flash accesses.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 4d7d6936eb29af7cca330937808312aa5f61454d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:33 2007 +0100
+
+ Introduce map_physmem() and unmap_physmem()
+
+ map_physmem() returns a virtual address which can be used to access a
+ given physical address without involving the cache. unmap_physmem()
+ should be called when the virtual address returned by map_physmem() is
+ no longer needed.
+
+ This patch adds a stub implementation which simply returns the
+ physical address cast to a uchar * for all architectures except AVR32,
+ which converts the physical address to an uncached virtual mapping.
+ unmap_physmem() is a no-op on all architectures, but if any
+ architecture needs to do such mappings through the TLB, this is the
+ hook where those TLB entries can be invalidated.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:32 2007 +0100
+
+ cfi_flash: Introduce read and write accessors
+
+ Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
+ them to access the flash memory. This makes it clearer when the flash
+ is actually being accessed; merely dereferencing a volatile pointer
+ looks just like any other kind of access.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 812711ce6b3a386125dcf0d6a59588e461abbb87
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:31 2007 +0100
+
+ Implement __raw_{read,write}[bwl] on all architectures
+
+ This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
+ m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
+ from Linux.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Oct 6 18:55:36 2007 +0200
+
+ cfi_flash: Reorder functions and eliminate extra prototypes
+
+ Reorder the functions in cfi_flash.c so that each function only uses
+ functions that have been defined before it. This allows the static
+ prototype declarations near the top to be eliminated and might allow
+ gcc to do a better job inlining functions.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:29 2007 +0100
+
+ cfi_flash: Make some needlessly global functions static
+
+ Make functions not declared in any header file static.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 7e5b9b471518c5652febc68ba62b432193d6abf4
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:28 2007 +0100
+
+ cfi_flash: Break long lines
+
+ This patch tries to keep all lines in the cfi_flash driver below 80
+ columns. There are a few lines left which don't fit this requirement
+ because I couldn't find any trivial way to break them (i.e. it would
+ take some restructuring, which I intend to do in a later patch.)
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Dec 11 13:59:57 2007 +0100
+
+ CFI: synchronize command offsets with Linux CFI driver
+
+ Fixes non-working CFI Flash on the Inka4x0 board.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Dec 7 12:17:34 2007 -0600
+
+ Handle MPC85xx PCIe reset errata (PCI-Ex 38)
+
+ On the MPC85xx boards that have PCIe enable the PCIe errata fix.
+ (MPC8544DS, MPC8548CDS, MPC8568MDS).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Dec 7 12:04:30 2007 -0600
+
+ Update Freescale MPC85xx ADS/CDS/MDS board config
+
+ * Enabled CONFIG_CMD_ELF
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d435793229ce29a42797c1edc39f5b34f987f91a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Dec 7 04:59:26 2007 -0600
+
+ Handle Asynchronous DDR clock on 85xx
+
+ The MPC8572 introduces the concept of an asynchronous DDR clock with
+ regards to the platform clock.
+
+ Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
+ mode.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:34:28 2007 -0600
+
+ Update Freescale MPC85xx ADS/CDS/MDS board config
+
+ * Removed some misc environment setup
+ * Enabled CONFIG_CMDLINE_EDITING
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:47:44 2007 -0600
+
+ Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:16:18 2007 -0600
+
+ Move the MPC8540 ADS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 870ceac5b3a3486c109396e005af81ae762b5710
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:14:50 2007 -0600
+
+ Move the MPC8560 ADS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:13:47 2007 -0600
+
+ Move the MPC8568 MDS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a853d56c59b33415304531443633808736acfc6e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 02:18:59 2007 -0600
+
+ Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
+
+ We already had defines for LAWAR_TRGT_IF_* that we should use
+ rather than creating new ones. Also, added some missing defines for
+ PCIE targets.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 04db400892da37b76a585e332a0c137954ad2015
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 02:10:09 2007 -0600
+
+ Stop using immap_t on 85xx
+
+ In the future the offsets to various blocks may not be in same location.
+ Move to using CFG_MPC85xx_*_ADDR as the base of the registers
+ instead of getting it via &immap.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2714223f8e04ab3e4133ff65872eef366d90bfea
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 01:23:09 2007 -0600
+
+ Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c480861bf000156e6a3e932c258db59ff2212dd3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 01:06:19 2007 -0600
+
+ Update MPC8568 MDS to use libfdt
+
+ Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Nov 14 15:52:06 2007 -0500
+
+ Add PCI Express support on MPC8568MDS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b90d25497625b90ffa3f2911a0895ca237556ff5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 00:11:44 2007 -0600
+
+ Update MPC85xx CDS to use libfdt
+
+ Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 28 22:54:27 2007 -0600
+
+ Update MPC8540 ADS to use libfdt
+
+ Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5ce715802f6c50dc78b3405b92f184b1e3710519
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 28 22:40:31 2007 -0600
+
+ Update MPC8560 ADS to use libfdt
+
+ Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 28 00:36:33 2007 -0600
+
+ Stop using immap_t for cpm offset on 85xx
+
+ In the future the offsets to various blocks may not be in same location.
+ Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
+ instead of getting it via &immap->im_cpm.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Nov 27 23:25:02 2007 -0600
+
+ Stop using immap_t for guts offset on 85xx
+
+ In the future the offsets to various blocks may not be in same location.
+ Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
+ instead of getting it via &immap->im_gur.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 50c03c8cf494d91cdec39670d95337c743e16ec9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Nov 27 22:42:34 2007 -0600
+
+ Update MPC8544 DS config
+
+ * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
+ * Removed some misc environment setup
+ * Moved to using fdtfile & fdtaddr as fdt env var names
+ * Enabled CONFIG_CMDLINE_EDITING
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit addce57e2e4c49e77ffb2020a84690713bb18b47
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 17:12:24 2007 -0600
+
+ Update MPC8544DS to use libfdt
+
+ Updated the MPC8544DS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 00:15:30 2007 -0600
+
+ Add libfdt based ft_cpu_setup for mpc85xx
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Dec 8 08:25:09 2007 +0100
+
+ CFI: Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Fri Dec 7 23:35:02 2007 +0100
+
+ CFI: support JEDEC flash roms in CFI-flash framework
+
+ The following patch adds support for non-CFI flash ROMS, by hooking into the
+ CFI flash code and using most of its code, as recently discussed here in the
+ thread "Mixing CFI and non-CFI flashs".
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c01b17dd856fa120b2970f50d9598546a4927ec3
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Nov 28 21:24:50 2007 -0500
+
+ Conditionally compile fdt_fixup_ethernet()
+
+ Fix compiler warnings: On boards that don't have ethernets defined,
+ don't compile fdt_fixup_ethernet().
+
+commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Nov 27 21:59:46 2007 -0600
+
+ Convert boards that set memory node to use fdt_fixup_memory()
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 17:06:15 2007 -0600
+
+ Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
+
+ We use a combination of the serialN alias and CONFIG_CONS_INDEX to
+ determine which serial alias we should set linux,stdout-path to.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 14:57:45 2007 -0600
+
+ Add common memory fixup function
+
+ Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 11:19:12 2007 -0600
+
+ Conditionally compile fdt_support.c
+
+ Modify common/Makefile to conditionally compile fdt_support.c based
+ on CONFIG_OF_LIBFDT.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d88e7ba0980773479e1a64badb293116071b7ef0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 10:41:40 2007 -0600
+
+ Fix build breakage due to libfdt import
+
+ The IDS8247 got lost in the update and need an API update
+ do to rename of functions in libfdt.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Nov 23 19:43:20 2007 -0500
+
+ Add spaces around the = in the fdt print format.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Dec 7 01:25:38 2007 +0900
+
+ sh: Moved driver of the SuperH dependence
+
+ The composition of the directory in the drivers/ changed.
+ I moved SuperH serial driver and marubun PCMCIA driver.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Dec 6 10:21:19 2007 +0100
+
+ Release v1.3.1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Dec 6 10:21:03 2007 +0100
+
+ ADS5121 Board: fix compile problem.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Dec 3 00:15:28 2007 +0100
+
+ Prepare for 1.3.1-rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 260eea5676ca46903a335686cc020b29c4ca46fe
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Nov 29 01:21:54 2007 +0900
+
+ sh: Add SuperH boards maintainer to MAINTAINERS file
+
+ Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Nov 29 00:13:04 2007 +0900
+
+ sh: Add ms7750se support in MAKEALL
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c7144373427a178332bf9754131c8c34c52c200a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 27 09:44:53 2007 +0100
+
+ sh: Add sh3 and sh4 support in MAKEALL
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 130080874a3d28450098481a262c5f7c855e908d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Nov 25 02:51:17 2007 +0900
+
+ sh: Add document for SuperH.
+
+ This document is a summary of information concerning SuperH of U-Boot.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Nov 25 02:39:31 2007 +0900
+
+ sh: Add marubun's pcmcia driver
+
+ Marubun pcmcia is a chip for PCMCIA used with SuperH.
+ Of course, this can be used even by other architectures.
+ When use this driver, came to be able to use CompactFlash
+ and Ethernet.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit febd86b969b975289ed948f1ac0eb9722da41ced
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Nov 25 02:32:13 2007 +0900
+
+ sh: Update SuperH SCIF driver
+
+ - Changed volatile unsigned to vu_.
+ - Changed Makefile for kconfig.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Nov 26 19:18:21 2007 +0100
@@ -1927,6 +2611,56 @@ Date: Mon Sep 24 00:08:37 2007 +0200
synchronizition with mainline
+commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:42:38 2007 +0900
+
+ sh: Add support command of ide with sh
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:38:42 2007 +0900
+
+ sh: Update Makefile
+
+ Add support MS7722SE01 to Makefile.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:31:13 2007 +0900
+
+ sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:19:24 2007 +0900
+
+ sh: Update MS7750SE01 platform
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 516ad760db3553766267ada01b7d5d727faa4bbd
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:17:08 2007 +0900
+
+ sh: Remove comment out code from include/asm-sh/cpu_sh4.h
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b02bad128669e567fce87d8df823b06a0144b8db
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:12:30 2007 +0900
+
+ sh: Update core code of SuperH.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
Author: Wolfgang Denk <wd@denx.de>
Date: Thu Sep 20 00:04:14 2007 +0200
@@ -8634,6 +9368,24 @@ Date: Tue May 15 07:55:42 2007 -0700
Fix to compile JSE against 20070514 git of u-boot
+commit 69df3c4da0c93017cceb25a366e794570bd0ed98
+Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
+Date: Sun May 13 21:01:03 2007 +0900
+
+ sh: MS7750SE support.
+
+ This adds support for the Hitachi MS7750SE.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
+Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
+Date: Sun May 13 20:58:00 2007 +0900
+
+ sh: First support code of SuperH.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
Author: Stefan Roese <sr@denx.de>
Date: Fri May 11 12:01:49 2007 +0200
diff --git a/MAINTAINERS b/MAINTAINERS
index 5c68e5d..9052a19 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -634,7 +634,7 @@ Haavard Skinnemoen <hskinnemoen@atmel.com>
ATSTK1002 AT32AP7000
ATSTK1003 AT32AP7001
ATSTK1004 AT32AP7002
-
+
#########################################################################
# SuperH Systems: #
# #
diff --git a/board/ms7722se/Makefile b/board/ms7722se/Makefile
index 94469f7..6dec013 100644
--- a/board/ms7722se/Makefile
+++ b/board/ms7722se/Makefile
@@ -1,7 +1,7 @@
#
# Copyright (C) 2007
# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
+#
# Copyright (C) 2007
# Kenati Technologies, Inc.
#
diff --git a/board/ms7722se/config.mk b/board/ms7722se/config.mk
index e4ca55a..4797d6f 100644
--- a/board/ms7722se/config.mk
+++ b/board/ms7722se/config.mk
@@ -29,4 +29,3 @@
#
TEXT_BASE = 0x8FFC0000
-
diff --git a/board/ms7722se/lowlevel_init.S b/board/ms7722se/lowlevel_init.S
index e0d519c..2024e27 100644
--- a/board/ms7722se/lowlevel_init.S
+++ b/board/ms7722se/lowlevel_init.S
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2007
* Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
+ *
* Copyright (C) 2007
* Kenati Technologies, Inc.
*
@@ -52,19 +52,19 @@ lowlevel_init:
mov.l r0, @r1
mov.l MSTPCR0_A, r1 ! Address of Power Control Register 0
- mov.l MSTPCR0_D, r0 !
+ mov.l MSTPCR0_D, r0 !
mov.l r0, @r1
mov.l MSTPCR2_A, r1 ! Address of Power Control Register 2
- mov.l MSTPCR2_D, r0 !
+ mov.l MSTPCR2_D, r0 !
mov.l r0, @r1
- mov.l SBSCR_A, r1 !
- mov.w SBSCR_D, r0 !
+ mov.l SBSCR_A, r1 !
+ mov.w SBSCR_D, r0 !
mov.w r0, @r1
- mov.l PSCR_A, r1 !
- mov.w PSCR_D, r0 !
+ mov.l PSCR_A, r1 !
+ mov.w PSCR_D, r0 !
mov.w r0, @r1
! mov.l RWTCSR_A, r1 ! 0xA4520004 (Watchdog Control / Status Register)
@@ -80,7 +80,7 @@ lowlevel_init:
mov.w r0, @r1
mov.l FRQCR_A, r1 ! 0xA4150000 Frequency control register
- mov.l FRQCR_D, r0 !
+ mov.l FRQCR_D, r0 !
mov.l r0, @r1
mov.l CCR_A, r1 ! Address of Cache Control Register
@@ -200,11 +200,9 @@ bsc_init:
rts
mov #0, r0
-
-
.align 2
-CCR_A: .long CCR
+CCR_A: .long CCR
MMUCR_A: .long MMUCR
MSTPCR0_A: .long MSTPCR0
MSTPCR2_A: .long MSTPCR2
@@ -223,7 +221,7 @@ FRQCR_D: .long 0x07022538
PSELA_A: .long 0xa405014E
PSELA_D: .word 0x0A10
- .align 2
+ .align 2
DRVCR_A: .long 0xa405018A
DRVCR_D: .word 0x0554
diff --git a/board/ms7722se/ms7722se.c b/board/ms7722se/ms7722se.c
index 3eeb1b7..0d3d55c 100644
--- a/board/ms7722se/ms7722se.c
+++ b/board/ms7722se/ms7722se.c
@@ -4,7 +4,7 @@
*
* Copyright (C) 2007
* Kenati Technologies, Inc.
- *
+ *
* board/ms7722se/ms7722se.c
*
* This program is free software; you can redistribute it and/or
@@ -57,4 +57,3 @@ void led_set_state (unsigned short value)
{
*((volatile unsigned short *) LED_BASE) = (value & 0xFF);
}
-
diff --git a/board/ms7722se/u-boot.lds b/board/ms7722se/u-boot.lds
index 24c2184..692bc62 100644
--- a/board/ms7722se/u-boot.lds
+++ b/board/ms7722se/u-boot.lds
@@ -32,19 +32,19 @@ SECTIONS
Although size of SDRAM can be either 16 or 32 MBytes,
we assume 16 MBytes (ie ignore upper half if the full
32 MBytes is present).
-
+
NOTE: This address must match with the definition of
TEXT_BASE in config.mk (in this directory).
-
+
*/
. = 0x8C000000 + (64*1024*1024) - (256*1024);
-
+
PROVIDE (reloc_dst = .);
PROVIDE (_ftext = .);
PROVIDE (_fcode = .);
PROVIDE (_start = .);
-
+
.text :
{
cpu/sh4/start.o (.text)
@@ -89,7 +89,7 @@ SECTIONS
}
PROVIDE (__u_boot_cmd_end = .);
- PROVIDE (reloc_dst_end = .);
+ PROVIDE (reloc_dst_end = .);
/* _reloc_dst_end = .; */
PROVIDE (bss_start = .);
@@ -103,4 +103,3 @@ SECTIONS
PROVIDE (_end = .);
}
-
diff --git a/board/ms7750se/lowlevel_init.S b/board/ms7750se/lowlevel_init.S
index 360c9fa..d3e3cd5 100644
--- a/board/ms7750se/lowlevel_init.S
+++ b/board/ms7750se/lowlevel_init.S
@@ -2,8 +2,8 @@
modified from SH-IPL+g
Renesaso SuperH / Solution Enginge MS775xSE01 BSC setting.
- Support CPU : SH7750/SH7750S/SH7750R/SH7751/SH7751R
-
+ Support CPU : SH7750/SH7750S/SH7750R/SH7751/SH7751R
+
Coyright (c) 2007 Nobuhiro Iwamatsu <iwmatsu@nigauri.org>
* See file CREDITS for list of people who contributed to this
@@ -102,7 +102,7 @@ init_bsc:
mov #0,r0
mov.b r0,@r1
- ! Do you need PCMCIA setting?
+ ! Do you need PCMCIA setting?
! If so, please add the lines here...
mov.l RTCNT_A,r1 /* RTCNT Address */
@@ -165,7 +165,7 @@ WCR2_A: .long WCR2
WCR2_D: .long WCR2_D_VALUE /* Per-area access and burst wait states */
WCR3_A: .long WCR3
WCR3_D: .long WCR3_D_VALUE /* Address setup and data hold cycles */
-RTCSR_A: .long RTCSR
+RTCSR_A: .long RTCSR
RTCSR_D: .long 0xA518 /* RTCSR Write Code A5h Data 18h */
RTCNT_A: .long RTCNT
RTCNT_D: .long 0xA500 /* RTCNT Write Code A5h Data 00h */
@@ -177,4 +177,3 @@ MCR_D1: .long MCR_D1_VALUE
MCR_D2: .long MCR_D2_VALUE
RFCR_A: .long RFCR
RFCR_D: .long 0xA400 /* RFCR Write Code A4h Data 00h */
-
diff --git a/board/ms7750se/ms7750se.c b/board/ms7750se/ms7750se.c
index 1ae9dd1..d2d824c 100644
--- a/board/ms7750se/ms7750se.c
+++ b/board/ms7750se/ms7750se.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007
+ * Copyright (C) 2007
* Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
*
* See file CREDITS for list of people who contributed to this
diff --git a/board/ms7750se/u-boot.lds b/board/ms7750se/u-boot.lds
index 24c2184..692bc62 100644
--- a/board/ms7750se/u-boot.lds
+++ b/board/ms7750se/u-boot.lds
@@ -32,19 +32,19 @@ SECTIONS
Although size of SDRAM can be either 16 or 32 MBytes,
we assume 16 MBytes (ie ignore upper half if the full
32 MBytes is present).
-
+
NOTE: This address must match with the definition of
TEXT_BASE in config.mk (in this directory).
-
+
*/
. = 0x8C000000 + (64*1024*1024) - (256*1024);
-
+
PROVIDE (reloc_dst = .);
PROVIDE (_ftext = .);
PROVIDE (_fcode = .);
PROVIDE (_start = .);
-
+
.text :
{
cpu/sh4/start.o (.text)
@@ -89,7 +89,7 @@ SECTIONS
}
PROVIDE (__u_boot_cmd_end = .);
- PROVIDE (reloc_dst_end = .);
+ PROVIDE (reloc_dst_end = .);
/* _reloc_dst_end = .; */
PROVIDE (bss_start = .);
@@ -103,4 +103,3 @@ SECTIONS
PROVIDE (_end = .);
}
-
diff --git a/cpu/sh4/cache.c b/cpu/sh4/cache.c
index 55acb31..4e744d7 100644
--- a/cpu/sh4/cache.c
+++ b/cpu/sh4/cache.c
@@ -30,36 +30,36 @@
* Jump to P2 area.
* When handling TLB or caches, we need to do it from P2 area.
*/
-#define jump_to_P2() \
- do { \
+#define jump_to_P2() \
+ do { \
unsigned long __dummy; \
- __asm__ __volatile__( \
- "mov.l 1f, %0\n\t" \
- "or %1, %0\n\t" \
- "jmp @%0\n\t" \
- " nop\n\t" \
- ".balign 4\n" \
- "1: .long 2f\n" \
- "2:" \
- : "=&r" (__dummy) \
- : "r" (0x20000000)); \
+ __asm__ __volatile__( \
+ "mov.l 1f, %0\n\t" \
+ "or %1, %0\n\t" \
+ "jmp @%0\n\t" \
+ " nop\n\t" \
+ ".balign 4\n" \
+ "1: .long 2f\n" \
+ "2:" \
+ : "=&r" (__dummy) \
+ : "r" (0x20000000)); \
} while (0)
/*
* Back to P1 area.
*/
-#define back_to_P1() \
- do { \
- unsigned long __dummy; \
- __asm__ __volatile__( \
- "nop;nop;nop;nop;nop;nop;nop\n\t" \
- "mov.l 1f, %0\n\t" \
- "jmp @%0\n\t" \
- " nop\n\t" \
- ".balign 4\n" \
- "1: .long 2f\n" \
- "2:" \
- : "=&r" (__dummy)); \
+#define back_to_P1() \
+ do { \
+ unsigned long __dummy; \
+ __asm__ __volatile__( \
+ "nop;nop;nop;nop;nop;nop;nop\n\t" \
+ "mov.l 1f, %0\n\t" \
+ "jmp @%0\n\t" \
+ " nop\n\t" \
+ ".balign 4\n" \
+ "1: .long 2f\n" \
+ "2:" \
+ : "=&r" (__dummy)); \
} while (0)
#define CACHE_VALID 1
diff --git a/cpu/sh4/config.mk b/cpu/sh4/config.mk
index 2dc7b91..b3feb2a 100644
--- a/cpu/sh4/config.mk
+++ b/cpu/sh4/config.mk
@@ -4,7 +4,7 @@
#
# (C) Copyright 2007
# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
+#
# See file CREDITS for list of people who contributed to this
# project.
#
diff --git a/cpu/sh4/cpu.c b/cpu/sh4/cpu.c
index d76d518..0ebf951 100644
--- a/cpu/sh4/cpu.c
+++ b/cpu/sh4/cpu.c
@@ -66,7 +66,7 @@ void icache_disable (void)
int icache_status (void)
{
- return 0;
+ return 0;
}
void dcache_enable (void)
diff --git a/cpu/sh4/interrupts.c b/cpu/sh4/interrupts.c
index d310dd2..6988ecc 100644
--- a/cpu/sh4/interrupts.c
+++ b/cpu/sh4/interrupts.c
@@ -25,7 +25,7 @@
int interrupt_init (void)
{
- return 0;
+ return 0;
}
void enable_interrupts (void)
@@ -33,7 +33,6 @@ void enable_interrupts (void)
}
-int disable_interrupts (void){
- return 0;
+int disable_interrupts (void){
+ return 0;
}
-
diff --git a/cpu/sh4/start.S b/cpu/sh4/start.S
index d88b705..a68ebb8 100644
--- a/cpu/sh4/start.S
+++ b/cpu/sh4/start.S
@@ -33,21 +33,21 @@ _start:
bsr 1f
nop
1: sts pr, r5
- mov.l ._reloc_dst, r4
- add #(_start-1b), r5
- mov.l ._reloc_dst_end, r6
+ mov.l ._reloc_dst, r4
+ add #(_start-1b), r5
+ mov.l ._reloc_dst_end, r6
2: mov.l @r5+, r1
mov.l r1, @r4
add #4, r4
cmp/hs r6, r4
bf 2b
-
- mov.l ._bss_start, r4
- mov.l ._bss_end, r5
+
+ mov.l ._bss_start, r4
+ mov.l ._bss_end, r5
mov #0, r1
-3: mov.l r1, @r4 /* bss clear */
+3: mov.l r1, @r4 /* bss clear */
add #4, r4
cmp/hs r5, r4
bf 3b
@@ -56,8 +56,8 @@ _start:
mov.l ._stack_init, r15 /* stack */
mov.l ._sh_generic_init, r0
- jsr @r0
- nop
+ jsr @r0
+ nop
loop:
bra loop
@@ -72,4 +72,3 @@ loop:
._gd_init: .long (_start - CFG_GBL_DATA_SIZE)
._stack_init: .long (_start - CFG_GBL_DATA_SIZE - CFG_MALLOC_LEN - 16)
._sh_generic_init: .long sh_generic_init
-
diff --git a/cpu/sh4/watchdog.c b/cpu/sh4/watchdog.c
index 04723a7..346e217 100644
--- a/cpu/sh4/watchdog.c
+++ b/cpu/sh4/watchdog.c
@@ -32,12 +32,12 @@ static void cnt_write (unsigned char value){
while (csr_read() & (1 << 5)) {
/* delay */
}
- *((volatile unsigned short *)(WDT_BASE + 0x00))
+ *((volatile unsigned short *)(WDT_BASE + 0x00))
= ((unsigned short) value) | 0x5A00;
}
static void csr_write (unsigned char value){
- *((volatile unsigned short *)(WDT_BASE + 0x04))
+ *((volatile unsigned short *)(WDT_BASE + 0x04))
= ((unsigned short) value) | 0xA500;
}
@@ -48,5 +48,3 @@ void reset_cpu (unsigned long ignored)
{
while(1);
}
-
-
diff --git a/doc/README.marubun-pcmcia b/doc/README.marubun-pcmcia
index 73c9f7f..3ed5cd3 100644
--- a/doc/README.marubun-pcmcia
+++ b/doc/README.marubun-pcmcia
@@ -1,59 +1,59 @@
U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
Last update 21/11/2007 by Nobuhiro Iwamatsu
-
+
========================================================================================
-0. What's this?
+0. What's this?
This driver supports MARUBUN MR-SHPC-01.
url: http://www.marubun.co.jp/product/semicon/devices/qgc18e0000002n2z.html
(Sorry Japanese only.)
- This chip is used with SuperH well, and adopted by the
- reference board.
+ This chip is used with SuperH well, and adopted by the
+ reference board.
ex. * MS7750SE01
* MS7722SE01
- * other
-
+ * other
+
This chip doesn't support CardBus.
-1. base source code
+1. base source code
The code is based on sources from the Linux kernel
- ( arch/sh/kernel/cf-enabler.c ).
+ ( arch/sh/kernel/cf-enabler.c ).
-2. How to use
+2. How to use
The options you have to specify in the config file are (with the
value for my board as an example):
* CONFIG_MARUBUN_PCCARD
If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD.
ex. #define CONFIG_MARUBUN_PCCARD
-
+
* CONFIG_PCMCIA_SLOT_A
Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
ex. #define CONFIG_PCMCIA_SLOT_A 1
* CFG_MARUBUN_MRSHPC
This is MR-SHPC-01 PCMCIA controler base address.
- You should do the setting matched to your environment.
- ex. #define CFG_MARUBUN_MRSHPC 0xb03fffe0
+ You should do the setting matched to your environment.
+ ex. #define CFG_MARUBUN_MRSHPC 0xb03fffe0
( for MS7722SE01 environment )
* CFG_MARUBUN_MW1
This is MR-SHPC-01 memory window base address.
- You should do the setting matched to your environment.
+ You should do the setting matched to your environment.
ex. #define CFG_MARUBUN_MW1 0xb0400000
( for MS7722SE01 environment )
-
+
* CFG_MARUBUN_MW1
This is MR-SHPC-01 attribute window base address.
- You should do the setting matched to your environment.
+ You should do the setting matched to your environment.
ex. #define CFG_MARUBUN_MW2 0xb0500000
( for MS7722SE01 environment )
-
+
* CFG_MARUBUN_MW1
This is MR-SHPC-01 I/O window base address.
- You should do the setting matched to your environment.
+ You should do the setting matched to your environment.
ex. #define CFG_MARUBUN_IO 0xb0600000
( for MS7722SE01 environment )
diff --git a/doc/README.sh b/doc/README.sh
index 0441a7a..075d360 100644
--- a/doc/README.sh
+++ b/doc/README.sh
@@ -1,5 +1,5 @@
-U-Boot for Renesas SuperH
+U-Boot for Renesas SuperH
Last update 08/10/2007 by Nobuhiro Iwamatsu
================================================================================
@@ -9,10 +9,10 @@ U-Boot for Renesas SuperH
================================================================================
1. Overview
- SuperH has an original boot loader. However, source code is dirty, and
+ SuperH has an original boot loader. However, source code is dirty, and
maintenance is not done.
- To improve sharing and the maintenance of the code, Nobuhiro Iwamatsu
- started the porting to u-boot in 2007.
+ To improve sharing and the maintenance of the code, Nobuhiro Iwamatsu
+ started the porting to u-boot in 2007.
================================================================================
2. Supported CPUs
@@ -33,13 +33,13 @@ U-Boot for Renesas SuperH
** README **
In SuperH, S-record and binary of made u-boot work on the memory.
- When u-boot is written in the flash, it is necessary to change the
- address by using 'objcopy'.
+ When u-boot is written in the flash, it is necessary to change the
+ address by using 'objcopy'.
ex) shX-linux-objcopy -Ibinary -Osrec u-boot.bin u-boot.flash.srec
-
+
================================================================================
4. Compiler
- You can use the following of u-boot to compile.
+ You can use the following of u-boot to compile.
- SuperH Linux Open site
http://www.superh-linux.org/
- KPIT GNU tools
@@ -52,11 +52,10 @@ U-Boot for Renesas SuperH
- SH7710/SH7712 (SH3)
- SH7780(SH4)
- SH7785(SH4)
-
+
5.2. Boards
- Many boards ;-)
================================================================================
Copyright (c) 2007
Nobuhiro Iwamatsu <iwamatsu@nigaur.org>
-
diff --git a/drivers/pcmcia/marubun_pcmcia.c b/drivers/pcmcia/marubun_pcmcia.c
index 89b2015..7b112af 100644
--- a/drivers/pcmcia/marubun_pcmcia.c
+++ b/drivers/pcmcia/marubun_pcmcia.c
@@ -17,8 +17,8 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
- *
- */
+ *
+ */
#include <common.h>
#include <config.h>
@@ -34,7 +34,7 @@
#endif
#if defined(CONFIG_PCMCIA) \
- && (defined(CONFIG_MARUBUN_PCCARD))
+ && (defined(CONFIG_MARUBUN_PCCARD))
/* MR-SHPC-01 register */
#define MRSHPC_MODE (CFG_MARUBUN_MRSHPC + 4)
@@ -79,14 +79,14 @@ int pcmcia_on (void)
outw(0x0b00,MRSHPC_MW0CR2); /* common mode & bus width 16bit SWAP = 1 */
else
outw(0x0300,MRSHPC_MW0CR2); /* common mode & bus width 16bit SWAP = 0 */
-
+
/* attribute window open */
outw(0x8a85,MRSHPC_MW1CR1); /* window 0xb8500000 */
if ((inw(MRSHPC_CSR) & 0x4000) != 0)
outw(0x0a00,MRSHPC_MW1CR2); /* attribute mode & bus width 16bit SWAP = 1 */
else
outw(0x0200,MRSHPC_MW1CR2); /* attribute mode & bus width 16bit SWAP = 0 */
-
+
/* I/O window open */
outw(0x8a86,MRSHPC_IOWCR1); /* I/O window 0xb8600000 */
outw(0x0008,MRSHPC_CDCR); /* I/O card mode */
@@ -94,7 +94,7 @@ int pcmcia_on (void)
outw(0x0a00,MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1 */
else
outw(0x0200,MRSHPC_IOWCR2); /* bus width 16bit SWAP = 0 */
-
+
outw(0x0000,MRSHPC_ISR);
outw(0x2000,MRSHPC_ICR);
outb(0x00,(CFG_MARUBUN_MW2 + 0x206));
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index 7818632..ee44ba2 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -1,7 +1,7 @@
/*
* SuperH SCIF device driver.
* Copyright (c) 2007 Nobuhiro Iwamatsu
- *
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -31,7 +31,7 @@
#endif
#define SCSMR (vu_short *)(SCIF_BASE + 0x0)
-#define SCBRR (vu_char *)(SCIF_BASE + 0x4)
+#define SCBRR (vu_char *)(SCIF_BASE + 0x4)
#define SCSCR (vu_short *)(SCIF_BASE + 0x8)
#define SCFTDR (vu_char *)(SCIF_BASE + 0xC)
#define SCFSR (vu_short *)(SCIF_BASE + 0x10)
@@ -51,7 +51,7 @@
#endif
#define SCR_RE (1 << 4)
-#define SCR_TE (1 << 5)
+#define SCR_TE (1 << 5)
#define FCR_RFRST (1 << 1) /* RFCL */
#define FCR_TFRST (1 << 2) /* TFCL */
#define FSR_DR (1 << 0)
@@ -69,7 +69,7 @@ void serial_setbrg (void)
DECLARE_GLOBAL_DATA_PTR;
int divisor = gd->baudrate * 32;
- *SCBRR = (CONFIG_SYS_CLK_FREQ + (divisor / 2)) /
+ *SCBRR = (CONFIG_SYS_CLK_FREQ + (divisor / 2)) /
(gd->baudrate * 32) - 1;
}
diff --git a/examples/stubs.c b/examples/stubs.c
index 263dd8c..571c4d5 100644
--- a/examples/stubs.c
+++ b/examples/stubs.c
@@ -132,7 +132,7 @@ gd_t *global_data;
*/
#define EXPORT_FUNC(x) \
asm volatile ( \
-" .globl _" #x "\n_" \
+" .globl _" #x "\n_" \
#x ":\n" \
" P0 = [P5 + %0]\n" \
" P0 = [P0 + %1]\n" \
@@ -155,17 +155,17 @@ gd_t *global_data;
/*
* r13 holds the pointer to the global_data. r1 is a call clobbered.
*/
-#define EXPORT_FUNC(x) \
- asm volatile ( \
- " .align 2\n" \
- " .globl " #x "\n" \
- #x ":\n" \
- " mov r13, r1\n" \
- " add %0, r1\n" \
- " add %1, r1\n" \
- " jmp @r1\n" \
- " nop\n" \
- " nop\n" \
+#define EXPORT_FUNC(x) \
+ asm volatile ( \
+ " .align 2\n" \
+ " .globl " #x "\n" \
+ #x ":\n" \
+ " mov r13, r1\n" \
+ " add %0, r1\n" \
+ " add %1, r1\n" \
+ " jmp @r1\n" \
+ " nop\n" \
+ " nop\n" \
: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r1");
#else
#error stubs definition missing for this architecture
diff --git a/include/asm-sh/bitops.h b/include/asm-sh/bitops.h
index 529d0f2..410fba4 100644
--- a/include/asm-sh/bitops.h
+++ b/include/asm-sh/bitops.h
@@ -2,7 +2,6 @@
#define __ASM_SH_BITOPS_H
#ifdef __KERNEL__
-//#include <asm/system.h>
#include <asm/irqflags.h>
/* For __swab32 */
#include <asm/byteorder.h>
@@ -99,8 +98,6 @@ static inline int test_and_change_bit(int nr, volatile void * addr)
return retval;
}
-//#include <asm-generic/bitops/non-atomic.h>
-
static inline unsigned long ffz(unsigned long word)
{
unsigned long result;
@@ -121,46 +118,34 @@ static inline unsigned long ffz(unsigned long word)
*
* Undefined if no bit exists, so code should check against 0 first.
*/
-static inline int ffs(int x)
+static inline int ffs (int x)
{
- int r = 1;
-
- if (!x)
- return 0;
- if (!(x & 0xffff)) {
- x >>= 16;
- r += 16;
- }
- if (!(x & 0xff)) {
- x >>= 8;
- r += 8;
- }
- if (!(x & 0xf)) {
- x >>= 4;
- r += 4;
- }
- if (!(x & 3)) {
- x >>= 2;
- r += 2;
- }
- if (!(x & 1)) {
- x >>= 1;
- r += 1;
- }
- return r;
+ int r = 1;
+
+ if (!x)
+ return 0;
+ if (!(x & 0xffff)) {
+ x >>= 16;
+ r += 16;
+ }
+ if (!(x & 0xff)) {
+ x >>= 8;
+ r += 8;
+ }
+ if (!(x & 0xf)) {
+ x >>= 4;
+ r += 4;
+ }
+ if (!(x & 3)) {
+ x >>= 2;
+ r += 2;
+ }
+ if (!(x & 1)) {
+ x >>= 1;
+ r += 1;
+ }
+ return r;
}
-
-#if 0
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/ext2-non-atomic.h>
-#include <asm-generic/bitops/ext2-atomic.h>
-#include <asm-generic/bitops/minix.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/fls64.h>
-#endif
#endif /* __KERNEL__ */
#endif /* __ASM_SH_BITOPS_H */
diff --git a/include/asm-sh/byteorder.h b/include/asm-sh/byteorder.h
index 8836e65..25626a0 100644
--- a/include/asm-sh/byteorder.h
+++ b/include/asm-sh/byteorder.h
@@ -28,4 +28,3 @@
#endif
#endif
-
diff --git a/include/asm-sh/cpu_sh7722.h b/include/asm-sh/cpu_sh7722.h
index fb63c6e..13d4a77 100644
--- a/include/asm-sh/cpu_sh7722.h
+++ b/include/asm-sh/cpu_sh7722.h
@@ -31,13 +31,13 @@
#define INTEVT 0xFF000028
/* MMU */
-#define PTEH 0xFF000000
-#define PTEL 0xFF000004
-#define TTB 0xFF000008
-#define TEA 0xFF00000C
-#define MMUCR 0xFF000010
-#define PASCR 0xFF000070
-#define IRMCR 0xFF000078
+#define PTEH 0xFF000000
+#define PTEL 0xFF000004
+#define TTB 0xFF000008
+#define TEA 0xFF00000C
+#define MMUCR 0xFF000010
+#define PASCR 0xFF000070
+#define IRMCR 0xFF000078
/* CACHE */
#define CCR 0xFF00001C
@@ -325,7 +325,7 @@
#define SPICR1 0xA4420030
/* SCIF */
-/*
+/*
#define SCSMR 0xFFE00000
#define SCBRR 0xFFE00004
#define SCSCR 0xFFE00008
@@ -1334,4 +1334,4 @@
#define SDDRL 0xFC11000A
#define SDINT 0xFC110018
-#endif /* _ASM_CPU_SH7722_H_ */
+#endif /* _ASM_CPU_SH7722_H_ */
diff --git a/include/asm-sh/cpu_sh7750.h b/include/asm-sh/cpu_sh7750.h
index 9993e63..bb6461a 100644
--- a/include/asm-sh/cpu_sh7750.h
+++ b/include/asm-sh/cpu_sh7750.h
@@ -1,7 +1,7 @@
/*
* (C) Copyright 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
*
- * SH7750/SH7750S/SH7750R/SH7751/SH7751R
+ * SH7750/SH7750S/SH7750R/SH7751/SH7751R
* Internal I/O register
*
* This program is free software; you can redistribute it and/or
diff --git a/include/asm-sh/posix_types.h b/include/asm-sh/posix_types.h
index 4bb9f7e..c9d9fb8 100644
--- a/include/asm-sh/posix_types.h
+++ b/include/asm-sh/posix_types.h
@@ -68,7 +68,7 @@ static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
#undef __FD_ISSET
static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
-{
+{
unsigned long __tmp = __fd / __NFDBITS;
unsigned long __rem = __fd % __NFDBITS;
return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
diff --git a/include/asm-sh/u-boot.h b/include/asm-sh/u-boot.h
index c74e97c..b79644c 100644
--- a/include/asm-sh/u-boot.h
+++ b/include/asm-sh/u-boot.h
@@ -25,7 +25,6 @@
#ifndef __ASM_SH_U_BOOT_H_
#define __ASM_SH_U_BOOT_H_
-
typedef struct bd_info {
unsigned long bi_memstart; /* start of DRAM memory */
unsigned long bi_memsize; /* size of DRAM memory in bytes */
@@ -41,4 +40,3 @@ typedef struct bd_info {
} bd_t;
#endif
-
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
index 18e9851..ae0d018 100644
--- a/include/configs/ms7722se.h
+++ b/include/configs/ms7722se.h
@@ -25,7 +25,7 @@
#ifndef __MS7722SE_H
#define __MS7722SE_H
-#undef DEBUG
+#undef DEBUG
#define CONFIG_SH 1
#define CONFIG_SH4 1
#define CONFIG_CPU_SH7722 1
@@ -56,7 +56,6 @@
/* MEMORY */
#define MS7722SE_SDRAM_BASE (0x8C000000)
#define MS7722SE_FLASH_BASE_1 (0xA0000000)
-//#define MS7722SE_FLASH_BASE_1 (0xA1000000)
#define MS7722SE_FLASH_BANK_SIZE (8*1024 * 1024)
#define CFG_LONGHELP /* undef to save memory */
@@ -87,12 +86,12 @@
#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) /* default load address for scripts ?!? */
-#define CFG_MONITOR_BASE (MS7722SE_FLASH_BASE_1) /* Address of u-boot image
+#define CFG_MONITOR_BASE (MS7722SE_FLASH_BASE_1) /* Address of u-boot image
in Flash (NOT run time address in SDRAM) ?!? */
#define CFG_MONITOR_LEN (128 * 1024) /* */
#define CFG_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */
#define CFG_GBL_DATA_SIZE (256) /* size in bytes reserved for initial data */
-#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
+#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
/* FLASH */
#define CFG_FLASH_CFI
@@ -102,7 +101,7 @@
#define CFG_FLASH_BASE (MS7722SE_FLASH_BASE_1) /* Physical start address of Flash memory */
-#define CFG_MAX_FLASH_SECT 150 /* Max number of sectors on each
+#define CFG_MAX_FLASH_SECT 150 /* Max number of sectors on each
Flash chip */
/* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */
@@ -131,7 +130,7 @@
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 33333333
-#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */
+#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */
#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
#endif /* __MS7722SE_H */
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
index 7925f20..3668156 100644
--- a/include/configs/ms7750se.h
+++ b/include/configs/ms7750se.h
@@ -37,7 +37,7 @@
/*
* Command line configuration.
*/
-//#include <config_cmd_default.h>
+/*#include <config_cmd_default.h>*/
#define CONFIG_CMD_DFL
#define CONFIG_CMD_FLASH
@@ -56,7 +56,7 @@
#define CFG_SDRAM_BASE (0x8C000000)
#define CFG_SDRAM_SIZE (64 * 1024 * 1024)
-#define CFG_LONGHELP
+#define CFG_LONGHELP
#define CFG_PROMPT "=> "
#define CFG_CBSIZE 256
#define CFG_PBSIZE 256
@@ -71,7 +71,7 @@
/* NOR Flash */
/* #define CFG_FLASH_BASE (0xA1000000)*/
#define CFG_FLASH_BASE (0xA0000000)
-#define CFG_MAX_FLASH_BANKS (1) /* Max number of
+#define CFG_MAX_FLASH_BANKS (1) /* Max number of
* Flash memory banks
*/
#define CFG_MAX_FLASH_SECT 142
diff --git a/lib_sh/Makefile b/lib_sh/Makefile
index c84276a..cf127a8 100644
--- a/lib_sh/Makefile
+++ b/lib_sh/Makefile
@@ -22,7 +22,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(ARCH).a
-SOBJS =
+SOBJS =
COBJS = board.o sh_linux.o # time.o
diff --git a/lib_sh/board.c b/lib_sh/board.c
index c63ac03..2cd60d7 100644
--- a/lib_sh/board.c
+++ b/lib_sh/board.c
@@ -47,7 +47,7 @@ static void mem_malloc_init (void)
mem_malloc_start = (TEXT_BASE - CFG_GBL_DATA_SIZE - CFG_MALLOC_LEN);
mem_malloc_end = (mem_malloc_start + CFG_MALLOC_LEN - 16);
mem_malloc_brk = mem_malloc_start;
- memset ((void *) mem_malloc_start, 0,
+ memset ((void *) mem_malloc_start, 0,
(mem_malloc_end - mem_malloc_start));
}
@@ -191,7 +191,7 @@ void sh_generic_init (void)
puts ("Net: ");
eth_initialize(gd->bd);
- if ((s = getenv ("bootfile")) != NULL) {
+ if ((s = getenv ("bootfile")) != NULL) {
copy_filename (BootFile, s, sizeof (BootFile));
}
#endif /* CONFIG_CMD_NET */
diff --git a/lib_sh/sh_linux.c b/lib_sh/sh_linux.c
index acd47b5..14b6815 100644
--- a/lib_sh/sh_linux.c
+++ b/lib_sh/sh_linux.c
@@ -28,7 +28,7 @@
extern image_header_t header; /* common/cmd_bootm.c */
/* The SH kernel reads arguments from the empty zero page at location
- * 0 at the start of SDRAM. The following are copied from
+ * 0 at the start of SDRAM. The following are copied from
* arch/sh/kernel/setup.c and may require tweaking if the kernel sources
* change.
*/
@@ -72,4 +72,3 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
kernel();
}
-