summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG2668
-rw-r--r--board/afeb9260/partition.c1
-rw-r--r--common/cmd_ubi.c2
-rw-r--r--cpu/mcf52x2/cpu_init.c2
-rw-r--r--cpu/mpc86xx/start.S2
-rw-r--r--cpu/ppc4xx/cpu.c1
-rw-r--r--cpu/ppc4xx/start.S2
-rw-r--r--drivers/i2c/soft_i2c.c1
-rw-r--r--drivers/mtd/ubi/crc32.c2
-rw-r--r--drivers/mtd/ubi/io.c2
-rw-r--r--drivers/mtd/ubi/vmt.c2
-rw-r--r--include/configs/PMC440.h2
-rw-r--r--include/configs/afeb9260.h1
-rw-r--r--include/linux/crc32.h8
-rw-r--r--include/linux/mtd/partitions.h6
-rw-r--r--include/linux/mtd/ubi.h2
-rw-r--r--include/ubi_uboot.h2
17 files changed, 2684 insertions, 22 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 5926978..0c9c047 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,2671 @@
+commit 84bc72d90c505fec3ef4b693995407a0bd4064e5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 11 18:39:08 2008 -0500
+
+ spi/stmicro: fix debug() display of cmd
+
+ The stmicro_wait_ready() func tries to show the actual opcode that was sent
+ to the device, but instead it displays the array pointer. Fix it to pull
+ out the opcode from the start of the array.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5b3375ac8c36c29c87abb132fede0509eb21e5c9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 11 06:23:37 2008 -0500
+
+ env_sf: support embedded environments
+
+ If both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE are defined, and the sect
+ size is larger than the env size, then it means the env is embedded in a
+ block. So we have to save/restore the part of the sector which is not the
+ environment. Previously, saving the environment in SPI flash in this
+ setup would probably brick the board as the rest of the sector tends to
+ contain actual U-Boot data/code.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit ecf5f077c8e77454f532eaac3e3afb7cfc48c62d
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Dec 3 11:28:30 2008 -0600
+
+ i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
+
+ All implementations of the functions i2c_reg_read() and
+ i2c_reg_write() are identical. We can save space and simplify the
+ code by converting these functions into inlines and putting them in
+ i2c.h.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e39cd81c44740d7355d277ed3d38536cbe1e003d
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Dec 5 15:36:14 2008 +0800
+
+ lib_ppc: rework the flush_cache
+
+ - It is possible to miss flush/invalidate the last
+ cache line, we fix it at here.
+ - add the volatile and memory clobber.
+
+ They are pointed by Scott Wood.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 63240ba88cd6a220057a0f28e5bf97f5b17ac84b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Dec 13 17:20:28 2008 -0600
+
+ Introduce addr_map library
+
+ Add a library that helps in translating between virtual and physical
+ addresses. This library can be useful as a simple means to implement
+ map_physmem() and virt_to_phys() for platforms that need functionality
+ beyond the simple 1:1 mapping.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 65e43a10631537dcb92c302d36301a12308216c3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Dec 13 17:20:27 2008 -0600
+
+ Introduce virt_to_phys()
+
+ virt_to_phys() returns the physical address given a virtual. In most
+ cases this will be just the input value as the vast majority of
+ systems run in a 1:1 mode.
+
+ However in systems that are not running this way it should report the
+ physical address or ~0 if no mapping exists for the given virtual
+ address.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 45845301af3de8675c1f7bbc815c6de35452605a
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Sun Dec 7 22:12:50 2008 +0100
+
+ POST Make: fix the sub-dir dependencies missing.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 22525779cb51f1bbe4e96fea7b778de1935a5a69
+Author: Martin Michlmayr <tbm@cyrius.com>
+Date: Wed Aug 6 14:44:05 2008 +0300
+
+ Fix a typo in fw_env.config
+
+ Reported-by: Martin Michlmayr <tbm@cyrius.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ba490b7761c62b549c222a9723e532dc801a3899
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 16:22:45 2008 -0600
+
+ Remove unused CONFIG_ADDR_STREAMING defines
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit d16da93430520d3e46c1ab52eedacf36ab7a2311
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Nov 24 11:54:47 2008 -0600
+
+ cmd_mem: Remove unused variable
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 3aed3aa2c128ce9fb39ca3f4e9385a7499e93dbf
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Dec 14 10:29:39 2008 +0100
+
+ Fix new found CFG_
+
+ Also fix some minor typos.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0e0c862efe7279e9609db74d758cd1b84c6c7209
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Sep 19 12:07:34 2008 +0200
+
+ Remove compiler warning: target CPU does not support interworking
+
+ This warning is issued by modern ARM-EABI GCC on non-thumb targets.
+
+ Signed-off-by: Vladimir Panfilov <pvr@emcraft.com>
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit cd6734510a9ff0f41c4a73567d4080ea0033d2c1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Nov 24 13:33:51 2008 +0100
+
+ Fix FIT and FDT support to have CONFIG_OF_LIBFDT and CONFIG_FIT independent
+
+ FDT support is used for both FIT style images and for architectures
+ that can pass a fdt blob to an OS (ppc, m68k, sparc).
+
+ For other architectures and boards which do not pass a fdt blob to an
+ OS but want to use the new uImage format, we just need FIT support.
+
+ Now we can have the 4 following configurations :
+
+ 1) FIT only CONFIG_FIT
+ 2) fdt blob only CONFIG_OF_LIBFDT
+ 3) both CONFIG_OF_LIBFDT & CONFIG_FIT
+ 4) none none
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 19ef4f7a6ef3b725aa9fe4b4f5fb676a84160172
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Dec 10 15:13:32 2008 +0100
+
+ ppc4xx: Disable EEPROM write access on PMC440 boards
+
+ This patch disables EEPROM wrtie access by default on PMC440 board.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 5b67a1439a73ba6c34007d9ff60a2c6aa90265df
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Dec 10 15:12:56 2008 +0100
+
+ ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 71fa0714fe5134bc8718c38d5261d267e88582ba
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 18 16:36:12 2008 +0100
+
+ MIPS: Flush data cache upon relocation
+
+ This patch now adds a flush to the data cache upon relocation. The
+ current implementation is missing this. Only a comment states that it
+ should be done. So let's really do it now.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 44174343688dba32571a34550dba08971c65fef1
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 18 16:36:22 2008 +0100
+
+ MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT
+
+ This patch adds the CONFIG_SKIP_LOWLEVEL_INIT option to start.S. This
+ enables support for boards where the lowlevel initialization is
+ already done when U-Boot runs (e.g. via OnChip ROM).
+
+ This will be used in the upcoming VCTH board support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit db08ecaa6eb8176904b3bae103a85ee8f735dc40
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 12 13:18:02 2008 +0100
+
+ MIPS: Add board_early_init_f() to init_sequence
+
+ This patch adds the board_early_init_f() call to the MIPS init
+ sequence. A weak dummy implementation is also added which can be
+ overridden by a board specific version.
+
+ This will be used by the upcoming VCTH board support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 9d23fc584c4b7b8bb9ecbee48920b1b04b08fa1b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 12 13:18:19 2008 +0100
+
+ MIPS: Add onenand_init() to board.c and move nand_init()
+
+ This patch adds a call to onenand_init() for OneNAND support and moves
+ the nand_init() call to an earlier place, so that the environment can
+ be used from NAND and OneNAND.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit d8bbc51c7ba9b737a20984333d19fe28a3526431
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Dec 9 11:32:46 2008 +0900
+
+ sh: Update sh2/sh2a timer
+
+ Renesas SH2/SH2A timer broken.
+ This patch fix timer function.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit a319f1496210117b73198e3d889ffffaf6825d00
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Dec 5 07:27:37 2008 +0100
+
+ sh: r2dplus fix register access
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 4d4a96055f6917335a89dbdf2e5556fa5ac329f6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Dec 2 07:40:03 2008 +0100
+
+ sh: r2dplus/lowlevel_init: coding style fix
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c54b9a42d8f5ab5b2a039b3a2e6fde8b427745e5
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Nov 25 11:05:19 2008 +0900
+
+ sh: Changed value of CACHE_OC_NUM_ENTRIES and CACHE_OC_WAY_SHIFT
+
+ SH4 is different a value of CACHE_OC_NUM_ENTRIES and
+ CACHE_OC_WAY_SHIFT every CPU.
+ This patch corrects these values.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit e9d5f35497885b3c65d494d09a525d443dcccd3b
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Nov 20 16:44:42 2008 +0900
+
+ sh: Update sh timer function
+
+ Change to write/readX function and fix timer problem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b81786cff476c41e332eaeb679158f6527cd67d4
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Nov 4 11:58:58 2008 +0900
+
+ sh: Migo-R: Update BSC value
+
+ A value of BSC CS4 was wrong, Fixed it.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 5783758fd260a02f44566ad8f29f899565cd0403
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Mon Nov 17 16:52:09 2008 +0900
+
+ sh: Update ms7722se board config
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 15e2697c9f7fb2ba672a1a70f07cd6d9d4e92b51
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Mon Nov 17 16:53:09 2008 +0900
+
+ sh: Update SuperH serial driver
+
+ The address of SCFSR register is wrong at SH7720/SH7721.
+ This patch fix this.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 9a1d3557dcd47365c12eeab584b822e57d994352
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 11 22:20:15 2008 +0100
+
+ sh: fix rsk7203 and MigoR out of tree build
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1951f847f0a851853871b613ad7cf21a5242226c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Dec 10 14:41:25 2008 +0100
+
+ ppc4xx: Update TEXT_BASE for CPCI405 boards
+
+ This patch fixes building U-Boot for CPCI405 boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8c92af7b2fbd60ae87379477f93c7ec9441b7452
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 9 20:08:01 2008 +0100
+
+ ppc4xx: Remove some features from ALPR to fit into 256k again
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3b089e4f889a2902449d55e081c886ae607cae89
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Dec 10 10:32:59 2008 +0100
+
+ UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization
+
+ With this patch we set the type back to NONE upon failing UBI partition
+ initialization. Otherwise further calls to the UBI subsystem would try
+ to really access the non-existing UBI partition.
+
+ Thanks to Michael Lawnick for pointing this out.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 817329351639a8895cd9b87b33aeff043f3d5a44
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Dec 10 10:28:33 2008 +0100
+
+ UBI: Return -ENOMEM upon failing malloc
+
+ Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon
+ failing malloc().
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Dec 9 23:34:15 2008 -0800
+
+ Fix compile error in building MBX860T.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8fab49ea911fe925392fa5afcc9bc7373a3d0cee
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Nov 25 11:42:20 2008 +0100
+
+ microblaze: Remove XUPV2P board
+
+ ---
+
+ Microblaze platforms use generic settings and to have
+ many platforms is confusing that's why I decided to remove this
+ platform from U-BOOT. ml401 tree is sufficient for covering
+ all Microblaze platforms.
+
+ This change will go through microblaze custodian tree.
+
+commit 99ba6f353582720defff6e6e6761dc455a207d31
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Nov 24 18:25:41 2008 +0100
+
+ microblaze: Remove CONFIG_LIBFDT due to error in common files
+
+commit e7d591e823a991513833af7030468409e25a3b13
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Nov 24 11:43:00 2008 +0100
+
+ microblaze: Fix ml401 uart16550 setting
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit c85ff0553a8cfbcca51c15b947e1ed55d3810a39
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Nov 24 11:38:22 2008 +0100
+
+ microblaze: Set up relocation is done
+
+commit bcb6dd9187d4b23c748704767bd12d20c829e996
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 9 23:20:31 2008 -0500
+
+ tools/netconsole: new script for working with netconsole over UDP
+
+ While the doc/README.NetConsole does have a snippet for people to
+ create their own netcat script, it's a lot easier to make a simple
+ dedicated script and tell people to use it.
+
+ Also spruce it up a bit to make it user friendly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8c5170a7d088601d5f30d85093388dab1f1e8ec0
+Author: Sonic Zhang <Sonic.Zhang@analog.com>
+Date: Tue Dec 9 23:20:18 2008 -0500
+
+ fs/fat: handle FAT on SATA
+
+ The FAT file system driver should also handle FAT on SATA devices.
+
+ Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Mon Nov 24 08:15:02 2008 -0500
+
+ libfdt: Fix redefined uintptr_t warning for USE_HOSTCC
+
+ Compiling U-Boot in an old OS environment (RedHat-7.3 :-) gives the
+ following warnings from FDT:
+
+ include/libfdt_env.h:50: warning: redefinition of 'uintptr_t'
+ /usr/include/stdint.h:129: warning: 'uintptr_t' previously declared here
+
+ Fix: Protect the definition of uintptr_t when compiling on the host
+ system.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 1fc2b165c51d6f40c8d505f1b3eaefdb6599b17b
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sat Nov 22 08:43:29 2008 +1100
+
+ Moved sc520 PCI definitions to stand-alone file
+
+ Signed Off By: Graeme Russ <graeme.russ@gmail.com>
+
+commit 1f5070c0c18fa5684bfce09c8abdf10c04ed48fa
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sat Nov 22 08:43:21 2008 +1100
+
+ Fixed path to sc520 SSI include file
+
+ Signed Off By: Graeme Russ <graeme.russ@gmail.com>
+
+commit d4f70da544c33db3e4fce6473dea4ecca4322545
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Fri Nov 21 06:28:05 2008 +1100
+
+ Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit c034075a713b60e654c64e88e87da29440f31bb4
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 12 13:30:10 2008 +0100
+
+ serial: Add vcth UART driver
+
+ This patch adds the UART driver for the upcoming VCTH board support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 142a80ffc3b537a9c45acd2444a42a77f147c602
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:36 2008 +0300
+
+ jffs2: cache data_crc results
+
+ As we moved data_crc() invocation from jffs2_1pass_build_lists() to
+ jffs2_1pass_read_inode() data_crc is going to be calculated on each
+ inode access. This patch adds caching of data_crc() results. There
+ is no significant improvement in speed (because of flash access
+ caching added in previous patch I think, crc in RAM is really fast)
+ but this patch impacts memory usage -- every b_node structure uses
+ 12 bytes instead of 8.
+
+ Signed-off-by: Alexey Neyman <avn@emcraft.com>
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 9b7076229ec6a958bd835ab70745f7676297ce82
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:35 2008 +0300
+
+ jffs2: summary support
+
+ This patch adds support for reading fs information from summary
+ node instead of scanning full eraseblock.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 70741004dc28946cd82c7af6789c4ddb3fc94526
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:34 2008 +0300
+
+ jffs2: add buffer to cache flash accesses
+
+ With this patch JFFS2 code allocates memory buffer of max_totlen size
+ (size of the largest node, calculated during scan time) and uses it to
+ store entire node. Speeds up loading. If malloc fails we use old ways
+ to do things.
+
+ Signed-off-by: Alexey Neyman <avn@emcraft.com>
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 8a36d31f72411144ac0412ee7e1880e801acd754
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:33 2008 +0300
+
+ jffs2: rewrite jffs2 scanning code based on Linux one
+
+ Rewrites jffs2_1pass_build_lists() function in style of Linux's
+ jffs2_scan_medium() and jffs2_scan_eraseblock().
+ This includes:
+ - Caching flash acceses
+ - Smart dealing with free space
+
+ Signed-off-by: Alexey Neyman <avn@emcraft.com>
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit e0b5532579eda8b4629f1b4f6e49c3cc60f52237
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:32 2008 +0300
+
+ jffs2: add sector_size field to part_info structure
+
+ This patch adds sector_size field to part_info structure (used
+ by new JFFS2 code).
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit f73846956778a7dfee83403ef9747aff77198848
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:31 2008 +0300
+
+ jffs2: fix searching for latest version in jffs2_1pass_list_inodes()
+
+ We need to update i_version inside cycle to find really latest version
+ inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside
+ dump_inode() instead of calling expensive jffs2_1pass_read_inode().
+
+ Signed-off-by: Alexey Neyman <avn@emcraft.com>
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 1113cb764b3da256ef8a1f9539f4efbe221ff3c4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 9 23:13:51 2008 +0100
+
+ evb64260: fix "cast to pointer from integer of different size" warnings
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d2776827315c3d469b8cb4cec14d58877798daa2
+Author: Stefan Althoefer <stefan.althoefer@web.de>
+Date: Sun Dec 7 19:39:11 2008 +0100
+
+ USB: descriptor handling
+
+ Hi,
+
+ I found a bug when working with the u-boot USB subsystem on IXP425 processor
+ (big endian Xscale aka ARMv5).
+ I recognized that the second usb_endpoint_descriptor of the attached memory
+ stick was corrupted.
+
+ The reason for this are the packed structures below (either u-boot and
+ u-boot-usb):
+
+ --------------
+ /* Endpoint descriptor */
+ struct usb_endpoint_descriptor {
+ unsigned char bLength;
+ unsigned char bDescriptorType;
+ unsigned char bEndpointAddress;
+ unsigned char bmAttributes;
+ unsigned short wMaxPacketSize;
+ unsigned char bInterval;
+ unsigned char bRefresh;
+ unsigned char bSynchAddress;
+
+ } __attribute__ ((packed));
+ /* Interface descriptor */
+ struct usb_interface_descriptor {
+ unsigned char bLength;
+ unsigned char bDescriptorType;
+ unsigned char bInterfaceNumber;
+ unsigned char bAlternateSetting;
+ unsigned char bNumEndpoints;
+ unsigned char bInterfaceClass;
+ unsigned char bInterfaceSubClass;
+ unsigned char bInterfaceProtocol;
+ unsigned char iInterface;
+
+ unsigned char no_of_ep;
+ unsigned char num_altsetting;
+ unsigned char act_altsetting;
+ struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
+ } __attribute__ ((packed));
+ ------------
+
+ As usb_endpoint_descriptor is only 7byte in length, the start of all
+ odd ep_desc[] structures is not word aligned. This makes wMaxPacketSize
+ of these structures also not word aligned.
+
+ ARMv5 Architecture however does not support non-aligned multibyte
+ data type (see A2.8 of ARM Architecture Reference Manual).
+
+ Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 4c253fdb2a175ea3472c38a1455a16faa58e81f0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 9 10:27:33 2008 -0600
+
+ drivers/fsl_pci_init: Fix compile warning
+
+ fsl_pci_init.c: In function 'fsl_pci_setup_inbound_windows':
+ fsl_pci_init.c:122: warning: comparison is always true due to limited range of data type
+
+ The check only makes sense if we are CONFIG_PHYS_64BIT
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit dedacc18a8c2b3951581eb721fa055a4e0ac4845
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Dec 7 09:45:35 2008 +0100
+
+ usbtty/omap: update to current API
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit ee2e9ba917a62cc2e3a484bb79c8da0e01cb93ed
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Tue Dec 9 17:52:05 2008 +0100
+
+ video: fix FADS823 and RRvision compiling issues
+
+ Since commit 561858ee building for FADS823 and RRvision
+ doesn't work. Let's include version.h and timestamp.h
+ unconditionally to fix the problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 2d2e05727fe4013f807ffa814dff0e75259a1db4
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 2 10:53:47 2008 +0100
+
+ UBI: Fix size parsing in "ubi create"
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2ee951ba2ac9874d2a93d52e7a187d3184be937e
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 27 14:07:09 2008 +0100
+
+ UBI: Enable re-initializing of the "ubi part" command
+
+ With this patch now, the user can call "ubi part" multiple times to
+ re-connect the UBI device to another MTD partition.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9def12cae33d2d3ea2dd56b197fd3dfb3ad60bf4
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 27 14:05:15 2008 +0100
+
+ MTD: Fix problem based on non-working relocation (list head mtd_partitions)
+
+ Don't use LIST_HEAD() but initialize the struct via INIT_LIST_HEAD() upon
+ first call of add_mtd_partitions(). Otherwise this won't work on platforms
+ where the relocation is broken (like MIPS or PPC).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5e3ab68e9acf9edf304b8aa32ad7e005483a2c47
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Nov 12 17:29:48 2008 -0800
+
+ Section name should be ".data", not "data"
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7fa6a2f3b66579dea8bc1a9177646e1141731b15
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 9 00:39:08 2008 +0100
+
+ MAKEALL: Automatically use parallel builds
+
+ Add logic to the MAKEALL script to determine the number of CPU cores
+ on the system, and run a parallel build if there is more than one.
+ Usually this significantrly accelerates builds.
+
+ Allow to manually adjust the number of parallel make jobs by using
+ the "BUILD_NCPUS" environment variable.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 268405fa7c44156c5192a70779920c70906af8d6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 9 00:24:30 2008 +0100
+
+ vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 153176a9414120ca1736f3cc4951623d6e14e6af
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 11 06:08:59 2008 +0100
+
+ avr32/bootm: remove unused variable 'ret'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 434c51a5e62f608a2a78ed5398ac43a1c77cc183
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Nov 12 13:06:48 2008 -0600
+
+ Remove unneeded CONFIG_SHELL references
+
+ Make should be using the bash shell by default which makes
+ CONFIG_SHELL unnecessary
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit cf7a7b99794bac936899819b95539be1dbd71708
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Nov 12 12:33:20 2008 -0600
+
+ Use bash for default GNU Make shell application
+
+ Some Make script commands rely on bash-specific features like brace
+ expansion, so default to bash for the SHELL variable with a fallback
+ to the standard sh shell
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 4b530018764934ad5689196e9aa5714a6f4d1a6c
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Nov 12 09:50:45 2008 +0100
+
+ jffs2: rename devices_init () in common/jffs2.c
+
+ rename devices_init () in common/jffs2.c to
+ jffs2_devices_init (), because there is also a
+ devices_init () in common/devices.c.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit af5eb847a10f1037590001355d88bab3fe7be48b
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Mon Nov 10 12:46:20 2008 +0000
+
+ SPARC: Fixed compiler error introduced by commit c160a9544743
+
+ This patch fixes a build error for the SPARC platform. It was
+ introduced by commit c160a9544743e80e8889edb2275538e7764ce334.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 4c60259899aa00f59db0d936b8807f9a26411c0f
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Sun Nov 9 12:50:59 2008 +0100
+
+ mgsuvd add the board-specific part of the HDLC driver
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 534a4359666af48bd69a3743d8a8c2bdb1d3ec70
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Sun Nov 9 12:45:03 2008 +0100
+
+ mgcoge add the board-specific part of the HDLC driver
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 135f5534538bb8ea4f38a7030da12187d22ef7e0
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Sun Nov 9 12:36:15 2008 +0100
+
+ keymile add the common parts of the HDLC driver
+
+ This implements the ICN protocol used across the backplane and is
+ needed by all the keymile boards.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 1cb82a9207a550557399eabc7fe47f21bbd9ddf8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Nov 7 22:46:22 2008 +0100
+
+ drivers/bios_emulator: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bcdf1d2cf6b24fb905fd7da80da4b3c65a7995b5
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Nov 6 14:01:51 2008 -0500
+
+ common/cmd_ide.c: Corrected endian order printing for compact flash serial number.
+
+ Corrected endian order printing for compact flash serial number.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 16a28ef219c27423a1ef502f19070c4d375079b8
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Thu Nov 6 15:04:23 2008 +0100
+
+ IOMUX: Add console multiplexing support.
+
+ Modifications to support console multiplexing. This is controlled using
+ CONFIG_SYS_CONSOLE_MUX in the board configuration file.
+
+ This allows a user to specify multiple console devices in the environment
+ with a command like this: setenv stdin serial,nc. As a result, the user can
+ enter text on both the serial and netconsole interfaces.
+
+ All devices - stdin, stdout and stderr - can be set in this manner.
+
+ 1) common/iomux.c and include/iomux.h contain the environment setting
+ implementation.
+ 2) doc/README.iomux contains a somewhat more detailed description.
+ 3) The implementation in (1) is called from common/cmd_nvedit.c to
+ handle setenv and from common/console.c to handle initialization of
+ input/output devices at boot time.
+ 4) common/console.c also contains the code needed to poll multiple console
+ devices for input and send output to all devices registered for output.
+ 5) include/common.h includes iomux.h and common/Makefile generates iomux.o
+ when CONFIG_SYS_CONSOLE_MUX is set.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 774ce72026f74ac9641bcbbc588b20f2e13f7ab8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Nov 4 16:03:46 2008 -0500
+
+ strings: use puts() rather than printf()
+
+ When running `strings` on really long strings, the stack tends to get
+ smashed due to printf(). Switch to puts() instead since we're only passing
+ the data through.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b03150b52e3c491a86a3cc0945274f0e8f9872e7
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Mon Nov 3 22:16:18 2008 +0100
+
+ Use new CONFIG_SYS_VXWORKS parameters for Netstal boards
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit 29a4c24de99d8cb4ac32991c04cab87ed94ca1f9
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Mon Nov 3 22:15:34 2008 +0100
+
+ cmd_elf.c: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters
+
+ - fix size too small by one in sprintf
+ - changed old (pre 2004) device name ibmEmac to emac
+ - boot device may be overriden in board config
+ - servername may be defined in board config
+ - additional parameters may be defined in board config
+ - fixed some line wrappings
+ - replaced redundant MAX define by max
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit e9084b23d16102f44ace24379a1c0c352497ef80
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Mon Nov 3 22:14:36 2008 +0100
+
+ Add vxworks.h to handle CONFIG_SYS_VXWORKS parameters
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit 0b2f4ecad473d785959c7976f20d2a00bd0ee01f
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Mon Nov 3 22:13:47 2008 +0100
+
+ README: Document CONFIG_SYS parameters for vxworks
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit ace514837cac656e29c37a19569cb8ea83071126
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Oct 31 11:12:38 2008 -0500
+
+ lcd: Let the board code show board-specific info cleanup
+
+ remove unneeded version.h from lcd.c
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 561858ee7d0274c3e89dc98d4d0698cb6fcf6fd9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Nov 3 09:30:59 2008 -0600
+
+ Update U-Boot's build timestamp on every compile
+
+ Use the GNU 'date' command to auto-generate a new U-Boot
+ timestamp on every compile.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 83ad179e2f0f625b88adb8ef5696709e46fb9077
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Thu Dec 4 22:25:57 2008 +0100
+
+ Remove redundant armv4 flag from arm926ejs compile flags
+
+ Currently the arm926ejs tree has the armv4 option set during compilation.
+ This flag does not belong here because a arm926 CPU is always a armv5 CPU.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 89a7a87f084c657f8e32b513a77b50eca07e17ec
+Author: Nicolas Ferre <nicolas.ferre@atmel.com>
+Date: Sat Dec 6 13:11:14 2008 +0100
+
+ at91: Choose environment variables location within make config target
+
+ This patch adds the possiblity to choose the media where the environment will
+ be located. This allow to choose this fundamental configuration without editing
+ config files.
+
+ Documentation file added.
+
+ Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
+ Acked-by: Stelian Pop <stelian@popies.net>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1450c4a6682378567030414a9f1198c39b7730c7
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Mon Nov 3 15:30:34 2008 +0100
+
+ lwmon, tqm8xx: Fix build errors
+
+ Commit 6b59e03e0237a40a2305ea385defdfd92000978b
+ lcd: Let the board code show board-specific info
+
+ introduced some bugs which prevent U-Boot building
+ for lwmon board if CONFIG_LCD_INFO_BELOW_LOGO will
+ be defined in the board configuration.
+
+ Also "LCD enabled" building for TQM823L doesn't work
+ since this commit.
+
+ This patch fixes above-mentioned issues.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit bfa0af6b22ff25b0719a8910f9b6d1f975aa6fb0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Nov 2 01:18:18 2008 -0400
+
+ ignore .gdb_history files
+
+ When using gdb, history files will often get generated. So ignore them.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c8aa7dfc18f7cc90d0aea6c7becbb67dfc5bba4b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 31 12:26:55 2008 +0100
+
+ FPGA: move fpga drivers to drivers/fpga
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6a86bb6c25376f0358478219fa28d7c84dd01ed0
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 16:29:38 2008 -0600
+
+ net: Fix TftpStart() ip:filename bug
+
+ The TftpStart() function modifies the 'BootFile'
+ string when 'BootFile' contains both an IP address
+ and filename (eg 1.2.3.4:/path/file). This causes
+ subsequent calls to TftpStart to incorrectly parse
+ the TFTP filename and server IP address to use.
+ For example:
+
+ => tftp 0x100000 10.52.0.62:/home/ptyser/non_existant
+ Speed: 100, half duplex
+ Using eTSEC1 device
+ TFTP from server 10.52.0.62; our IP address is 10.52.253.79
+ ^^^^^^^^^^ CORRECT
+ Filename '/home/ptyser/non_existant'.
+ ^^^^^^^^^^^^^^^^^^^^^^^^^ CORRECT
+ Load address: 0x100000
+ Loading: *
+ TFTP error: 'File not found' (1)
+ Starting again
+
+ eTSEC2: No link.
+ Speed: 100, half duplex
+ Using eTSEC1 device
+ TFTP from server 10.52.0.33; our IP address is 10.52.253.79
+ ^^^^^^^^^^ WRONG
+ Filename '10.52.0.62'.
+ ^^^^^^^^^^ WRONG
+ Load address: 0x100000
+ Loading: *
+ TFTP error: 'File not found' (1)
+ Starting again
+
+ TftpStart() was modified to not modify the 'BootFile' string.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d32c5be50bf0600bfdc54223ef341ee9c63db445
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 16:26:21 2008 -0600
+
+ net: Add additional IP fragmentation check
+
+ Ignore IP packets which have the "more fragments" flag bit
+ set. This flag indicates the IP packet is fragmented and
+ must be ignored by U-Boot.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e0c07b868cab405ab4b5335a0247899bfc5ea0b6
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 16:26:20 2008 -0600
+
+ net: Define IP flag field values
+
+ These defines were pulled from the "Add simple
+ IP/UDP fragmentation support" patch from Frank
+ Haverkamp <haver@vnet.ibm.com>.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 23afaba65ec5206757e589ef334a8b38168c045f
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Tue Dec 2 10:31:04 2008 +0100
+
+ net: tsec: Fix Marvell 88E1121R phy init
+
+ This patch tries to ensure that phy interrupt pin
+ won't be asserted after booting. We experienced
+ following issues with current 88E1121R phy init:
+
+ Marvell 88E1121R phy can be hardware-configured
+ to share MDC/MDIO and interrupt pins for both ports
+ P0 and P1 (e.g. as configured on socrates board).
+ Port 0 interrupt pin will be shared by both ports
+ in such configuration. After booting Linux and
+ configuring eth0 interface, port 0 phy interrupts
+ are enabled. After rebooting without proper eth0
+ interface shutdown port 0 phy interrupts remain
+ enabled so any change on port 0 (link status, etc.)
+ cause assertion of the interrupt. Now booting Linux
+ and configuring eth1 interface will cause permanent
+ phy interrupt storm as the registered phy 1 interrupt
+ handler doesn't acknowledge phy 0 interrupts. This
+ of course should be fixed in Linux driver too.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2e4970d8109d690adcf615d9e3cac7b5b2e8eaed
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Dec 2 12:59:51 2008 -0600
+
+ net: Fix download command parsing
+
+ When CONFIG_SYS_HUSH_PARSER is defined network download
+ commands with 1 argument in the format 'tftp "/path/file"'
+ do not work as expected. The hush command parser strips
+ the quotes from "/path/file" which causes the network
+ commands to interpret "/path/file" as an address
+ instead of the intended filename.
+
+ The previous check for a leading quote in netboot_common()
+ was replaced with a check which ensures only valid
+ numbers are treated as addresses.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3c2c2f427905040c1513d0c51d637689cba48346
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Thu Nov 27 22:30:27 2008 +0100
+
+ Remove non-ascii characters from fat code
+
+ This code contains some non-ascii characters in comment lines and code.
+ Most editors do not display those characters properly and editing those
+ files results always in diffs at these places which are usually not required
+ to be changed at all. This is error prone.
+
+ So, remove those weird characters and replace them by normal C-style
+ equivalents for which the proper defines were already in the header.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit dc889e865356497d3e495570118c2245ebce2631
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 28 20:16:58 2008 +0800
+
+ 85xx: fix the wrong DDR settings for MPC8572DS
+
+ The default DDR freq is 400MHz or 800M data rate,
+ the old settings is pure wrong for the default case.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9df59533f77de2829b4b66e5b7620e04edaa391c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 24 10:29:26 2008 -0600
+
+ 85xx: init gd as early as possible
+
+ Moved up the initialization of GD so C code like set_tlb() can use
+ gd->flags to determine if we've relocated or not in the future.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit aed461af81012a398a205e9be67ab37667491838
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 24 10:29:25 2008 -0600
+
+ 85xx: Fix relocation of CCSRBAR
+
+ If the virtual address for CCSRBAR is the same after relocation but
+ the physical address is changing we'd end up having two TLB entries with
+ the same VA. Instead we new us the new CCSRBAR virt address + 4k as a
+ temp virt address to access the old CCSRBAR to relocate it.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit ea154a1781135d822eedee7567cc156089eae93c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 24 10:25:14 2008 -0600
+
+ FSL: Moved BR_PHYS_ADDR for localbus to common header
+
+ The BR_PHYS_ADDR macro is useful on all machines that have local bus
+ which is pretty much all 83xx/85xx/86xx chips.
+
+ Additionally most 85xx & 86xx will need it if they want to support
+ 36-bit physical addresses.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9427ccde0355a2ebf47454e8e1be59f5b9864e08
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 13:47:12 2008 -0600
+
+ 85xx: Add PORDEVSR_PCI1 define
+
+ Add define used to determine if PCI1 interface is in PCI or PCIX mode.
+
+ Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 35db1c6d34b57ae15e99cf03c8e8f8a6148d74f3
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Nov 21 19:24:22 2008 -0600
+
+ drivers/fsl_pci_init: Fix inbound window mapping bug
+
+ The current code will cause the creation of a 4GB window
+ starting at 0 if we have more than 4GB of RAM installed,
+ which overlaps with PCI_MEM space and causes pci_bus_to_phys()
+ to return erroneous information. Limit the size to 4GB - 1;
+ which causes the code to create one 2GB and one 1GB window
+ instead.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 5a105a333dab6a23e92d763ce76d6f31d57f45df
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Nov 20 15:36:48 2008 -0600
+
+ Removed unused CONFIG_L1_INIT_RAM symbol.
+
+ Prevent further viral propogation of the unused
+ symbol CONFIG_L1_INIT_RAM by just removing it.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 7008d26a40a76f90cae5824c812cfed449fb97b8
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Oct 29 09:21:44 2008 -0500
+
+ fsl ddr skip interleaving if not supported.
+
+ Removed while(1) hang if memctl_intlv_ctl is set wrong.
+ Remove embedded tabs from strings.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit dd332e18d082de75eca3fc2c7c778f5d4571a096
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Nov 13 18:08:57 2008 +0100
+
+ 85xx: socrates: fix DDR SDRAM tlb entry configuration
+
+ since commit be0bd8234b9777ecd63c4c686f72af070d886517
+ tlb entry for socrates DDR SDRAM will be reconfigured
+ by setup_ddr_tlbs() from initdram() causing an
+ inconsistency with previously configured DDR SDRAM tlb
+ entry from tlb_table:
+
+ socrates>l2cam 7 9
+ IDX PID EPN SIZE V TS RPN U0-U3 WIMGE UUUSSS
+ 7 : 00 00000000 256MB V 0 -> 0_00000000 0000 -I-G- ---RWX
+ 8 : 00 00000000 256MB V 0 -> 0_00000000 0000 ----- ---RWX
+ 9 : 00 10000000 256MB V 0 -> 0_10000000 0000 ----- ---RWX
+
+ This patch makes the presence of the DDR SDRAM tlb entry in
+ the tlb_table dependent on CONFIG_SPD_EEPROM to avoid this
+ inconsistency.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit a2cd50ed6ef0ac6b127b3d6db756979a8336718d
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Nov 11 10:17:10 2008 -0600
+
+ 85xx: Add CPU 2 errata workaround to all 8548 boards
+
+ All mpc8548-based boards should implement the suggested workaround
+ to CPU 2 errata. Without the workaround, its possible for the
+ 8548's core to hang while executing a msync or mbar 0 instruction
+ and a snoopable transaction from an I/O master tagged to make
+ quick forward progress is present.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit e57f0fa1333cdf3ca36110aac2900712a5f82976
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:53:45 2008 +0800
+
+ 85xx: the DDR tlb is missed for the !CONFIG_SPD_EEPROM case
+
+ we need TLB entry for DDR at !SPD case.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9b0ad1b1c7a15ff674978705c7c52264978dc5d8
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:53:38 2008 +0800
+
+ 85xx: remove the unused ddr_enable_ecc in the board file
+
+ The DDR controller of 8548/8544/8568/8572/8536 processors
+ have the ECC data init feature, and the new DDR code is
+ using the feature, and we don't need the way with DMA to
+ init memory any more.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 4a129a57d923f7c15aa1f567028a80a32d66a100
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 30 19:36:53 2008 +0100
+
+ at91rm9200dk: Fix typo
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ed3b18e05c9a8ffa5fb643da9bcec7452e5d5e01
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 30 19:36:50 2008 +0100
+
+ AT91: remove non supported board AT91RM9200DF macro
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bd876772ee04095e5dd943d97515a1f14bad4b1c
+Author: Ilko Iliev <iliev@ronetix.at>
+Date: Tue Dec 2 17:27:54 2008 +0100
+
+ mtd/dataflash.c: fix a problem with the last partition
+
+ This patch fix the problem that only the [NB_DATAFLASH_AREA - 1] dataflash
+ partition can be defined to use the area to the end of dataflash size.
+ Now it is possible to have only one dataflash partition from 0 to the end
+ of of dataflash size.
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit 03f797793b124dccaae145b977d15d6cb9e74504
+Author: Ilko Iliev <iliev@ronetix.at>
+Date: Tue Dec 2 17:20:17 2008 +0100
+
+ fix some coding style violations.
+
+ This patch fix some coding style violations.
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit 5e46b1e54112f4b7fd5185665e571510132c12a7
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 27 14:11:37 2008 +0100
+
+ OneNAND: Add missing mtd info struct before calling onenand_erase()
+
+ Without this patch "saveenv" crashes when MTD partitions are enabled (e.g.
+ for use in UBI) via CONFIG_MTD_PARTITIONS.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 29382d4064fbaff5daacff4c3209370fa5713966
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Thu Nov 20 16:43:52 2008 -0600
+
+ mpc8641: Fix error in README
+
+ I made some updates to the code that didn't make it into the
+ README - fix this
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 801a194616d95e6fc426a176d9615ccbf9876c7f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Nov 20 12:01:02 2008 -0600
+
+ Removed unused CONFIG_L1_INIT_RAM symbol.
+
+ Prevent further viral propogation of the unused
+ symbol CONFIG_L1_INIT_RAM by just removing it.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f698738e46cb461e28c2d58228bb34a2fcf5a475
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Nov 20 14:02:56 2008 -0600
+
+ 86xx: Fix non-64-bit compilation problems.
+
+ Introducing 64-bit (36-bit) support for the MPC8641HPCN
+ failed to accomodate the other two 86xx boards.
+ Introduce definitions for CONFIG_SYS_CCSRBAR_PHYS_{LOW,HIGH}
+ CONFIG_SYS_CCSR_DEFAULT_DBAT{U,L} and CONFIG_SYS_CCSR_DEFAULT_IBAT{U,L}
+ with nominal 32-bit values.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Acked-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit bebfc6ef3ec994c8e18783269b1d8d41f8e38afd
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Nov 26 17:40:37 2008 +0100
+
+ Remove obsolete command (apply afte USB style patch, 80 chars strict)
+
+ Remove USB obsolete commmand
+
+ Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit de39f8c19d7c12017248c49d432dcb81db68f724
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Nov 26 17:41:34 2008 +0100
+
+ USB style patch, 80 chars strict
+
+ USB Code style patch
+
+ Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit d10c5a87cb8affbb4d35a311370316d4383d598e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Nov 7 22:46:21 2008 +0100
+
+ drivers/usb: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 2077e348c2a84901022ad95311b47b70361e6daa
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Nov 25 10:47:02 2008 -0600
+
+ NAND: Fix misplaced return statement in nand_{read,write}_skip_bad().
+
+ This caused the operation to be needlessly repeated if there were
+ no bad blocks and no errors.
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 89295028e7d8f7a524f485328279d72fdb102385
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Nov 24 12:09:50 2008 +0100
+
+ ppc4xx: ml300 remove Xilinx BSP from ml300 folder
+
+ This BSP should be outside u-boot source tree.
+ The second reason is that xilinx ppc405 was moved to generic platform.
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 24eea623d4974a169026a975ba12fb23d48154b1
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Nov 24 15:11:10 2008 +0100
+
+ ppc4xx: Remove unused features
+
+ This patch disables some unused features from the PCI405 configuration
+ to keep U-Boot image size below 192k.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0c2385c3bb51f5d3911fce1ec4720db86b534c2b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Nov 24 15:11:09 2008 +0100
+
+ ppc4xx: Use correct io accessors for PCI405
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 348c849d86a6f0785752b9bc497a34658713d1d1
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Nov 24 15:11:08 2008 +0100
+
+ ppc4xx: Remove unused code from PCI405 code
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 58c696eed839af894e0265064669c402dc28b371
+Author: Wolfgang Denk <wd@xpert.denx.de>
+Date: Mon Nov 24 21:50:59 2008 +0100
+
+ AT91RM9200DK: fix broken boot from NOR flash
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8052352f20b33bef8f9872fc983eac73d4693c38
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Tue Nov 18 10:48:46 2008 +0100
+
+ at91rm9200: fix broken boot from nor flash
+
+ This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if
+ CONFIG_AT91RM9200 is defined and nor preloader is used.
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+
+commit 25ea652e907516a283b38237e83712a918f125d7
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Mon Nov 17 15:58:00 2008 +0100
+
+ UBI: Add proof-of-concept CFI flash support
+
+ With this patch UBI can be used on CFI flash chips.
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e6a7edbc1778d27431ac663b40a71dafa5d20578
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Mon Nov 17 15:57:59 2008 +0100
+
+ mtd: Remove a printf() from add_mtd_device().
+
+ Remove a printf() from add_mtd_device(), which produces spurious output.
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 91809ed51d8327a8dbbf29aa98a091154c282171
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Mon Nov 17 15:57:58 2008 +0100
+
+ cfi-mtd: Add cfi-mtd driver.
+
+ Add cfi-mtd driver, which exports CFI flash to MTD layer.
+ This allows CFI flash devices to be used from MTD layer.
+
+ Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD
+ option. Initialization is done by calling cfi_mtd_init() from
+ flash_init().
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6ea808efdf9aa5d9067fbfac32acde8539129ed2
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Mon Nov 17 15:49:32 2008 +0100
+
+ cfi_flash: Add interface for flash verbosity control
+
+ Add interface for flash verbosity control. It allows
+ to disable output from low-level flash API. It is useful
+ when calling these low-level functions from context other
+ than flash commands (for example the MTD/CFI interface
+ implmentation).
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ebc9784ce6528385bb8d2558e783622d4bbf20f8
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Thu Nov 20 15:17:38 2008 +0100
+
+ cfi_flash: Export flash_sector_size() function.
+
+ Export flash_sector_size() function from drivers/mtd/cfi_flash.c,
+ so that it can be used in the upcoming cfi-mtd driver.
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 45aa5a7f4d5bcb79927ddfc896c1d7c4326e235d
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 17 14:45:22 2008 +0100
+
+ cfi_flash: Make all flash access functions weak
+
+ This patch defines all flash access functions as weak so that
+ they can be overridden by board specific versions.
+
+ This will be used by the upcoming VCTH board support where the NOR
+ FLASH unfortunately can't be accessed memory-mapped. Special
+ accessor functions are needed here.
+
+ To enable this weak functions you need to define
+ CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header.
+ Otherwise the "old" default functions will be used resulting
+ in smaller code.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a5c4067017631d903e1afa6ad615f0ce19fea517
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 24 08:31:16 2008 +0100
+
+ UBI: Change parsing of size in commands to default to hex
+
+ Currently the size parameters of the UBI commands (e.g. "ubi write") are
+ decoded as decimal instead of hex as default. This patch now interprets
+ all these values consistantly as hex, as all other standard U-Boot commands
+ do.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit de01c76c3ccc4e6c5989228eed58e955a3a1a968
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Nov 21 13:06:06 2008 +0100
+
+ ppc4xx: ML2 shouldn't include the 4xx EMAC driver
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1a6a00dcc5bdfc6e9b4b00f39c1f583a7f96fc7f
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Nov 14 16:19:19 2008 +0300
+
+ ppc4xx: katmai: Change default config
+
+ This patch enables support for EXT2, and increases the
+ CONFIG_SYS_BOOTMAPSZ size for the default configuration
+ of the katmai boards to use them as the RAID-reference
+ AMCC setups.
+
+ EXT2 enabling allows one to boot kernels from the EXT2
+ formatted Compact Flash cards.
+
+ CONFIG_SYS_BOOTMAPSZ increasing allows one to boot the
+ Linux kernels, which use PAGE_SIZE of 256KB. Otherwise,
+ the memory area with DTB file (which is placed at the
+ end of the bootmap area) will turn out to be overlapped
+ with the BSS segment of the 256KB kernel, and zeroed
+ in early_init() of Linux.
+
+ Actually, increasing of the bootmap size could be done
+ via setting of the bootm_size U-Boot variable, but it looks
+ like the current U-Boot implementation have some bootm_size-
+ related functionality lost. In many places through the U-Boot
+ code the CONFIG_SYS_BOOTMAPSZ definition is used directly
+ (instead of trying to read the corresponding value from the
+ environment). The same is truth for the boot_jump_linux()
+ function in lib_ppc/bootm.c, where U-Boot transfers control
+ to Linux passing the CONFIG_SYS_BOOTMAPSZ (not bootm_size)
+ value to the booting kernel.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ddf45cc758d394591fb9bcdcbe96530f733f2bce
+Author: Dave Mitchell <dmitch71@gmail.com>
+Date: Thu Nov 20 14:09:50 2008 -0600
+
+ ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization
+
+ Expanded OCM TLB to allow access to 64K OCM as well as 256K of
+ internal SRAM.
+
+ Adjusted internal SRAM initialization to match updated user
+ manual recommendation.
+
+ OCM & ISRAM are now mapped as follows:
+ physical virtual size
+ ISRAM 0x4_0000_0000 0xE300_0000 256k
+ OCM 0x4_0004_0000 0xE304_0000 64k
+
+ A single TLB was used for this mapping.
+
+ Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b14ca4b61a681f75f3125676e09d7ce6af66e927
+Author: Dave Mitchell <dmitch71@gmail.com>
+Date: Thu Nov 20 14:00:49 2008 -0600
+
+ ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs
+
+ Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and
+ L2 cache DCRs from ppc440.h to this new header.
+
+ Also converted these DCR defines from lowercase to uppercase and
+ modified referencing modules to use them.
+
+ Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 711e2b2af820d21d9931d4cf8057d3894600fd54
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Thu Nov 20 14:37:57 2008 -0500
+
+ ppc4xx: Delete unused definitions for SDR0_DDRCFG from ppc4xx.h
+
+ The definitions of bits in SDR_CFG are incorrect, and not used within
+ U-Boot. Therefore, they can be removed.
+
+ The naming of the sdr_ddrdl/sdr_cfg registers do not follow conventions,
+ and are unused, so they can be removed too.
+
+ A definition for SDR0_DDRCFG is added.
+
+ Signed-off-by: Steven A. Falco <sfalco@harris.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e23c7c95a96eb0f068efe5c532215a10a1512a95
+Author: Dirk Behme <dirk.behme@gmail.com>
+Date: Mon Nov 10 20:15:25 2008 +0100
+
+ ARM: OMAP: Convert IO macros
+
+ Convert IO macros to readx/writex.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit 263b749e2e25473a48776d317bd2a7e2ddcdd212
+Author: Ilko Iliev <iliev@ronetix.at>
+Date: Sun Nov 9 15:53:14 2008 +0100
+
+ lib_arm: do_bootm_linux() - correct a small mistake
+
+ This patch corrects a small bug in the "if" condition:
+ the parameter "flag" is 0 and the "if" condition is always true.
+ The result is - the boom command doesn't start the kernel.
+ Affected targets: all arm based.
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit 3e0cda071a67cb5709e3fa4faf6b31a731859acc
+Author: Stelian Pop <stelian@popies.net>
+Date: Sun Nov 9 00:14:46 2008 +0100
+
+ AT91: Enable PLLB for USB
+
+ At least some (old ?) versions of the AT91Bootstrap do not set up the
+ PLLB correctly to 48 MHz in order to make USB host function correctly.
+
+ This patch sets up the PLLB to the same values Linux uses, and makes USB
+ work ok on the following CPUs:
+ - AT91CAP9
+ - AT91SAM9260
+ - AT91SAM9263
+
+ This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all
+ the relevant AT91CAP9/AT91SAM9 atmel boards.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ad229a44e162af0f65e57e4e3dc133d5f0364ecb
+Author: Stelian Pop <stelian@popies.net>
+Date: Fri Nov 7 13:55:14 2008 +0100
+
+ AT91: Use AT91_CPU_CLOCK in displays
+
+ Introduce AT91_CPU_CLOCK and use it for displaying the CPU
+ speed in the LCD driver.
+
+ Also make AT91_MAIN_CLOCK and AT91_MASTER_CLOCK reflect the
+ corresponding board clocks.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 25fb4eaaeab3f8866020818f4729d990dcc91cf0
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 20 11:46:20 2008 +0100
+
+ ppc4xx: Clear all potentially pending exceptions in MCSR
+
+ This is needed on Canyonlands which still has an exception pending
+ while running relocate_code(). This leads to a failure after trap_init()
+ is moved to the top of board_init_r().
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit facdad5f2602e899a01746916beddbf9e856b5ee
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Nov 19 10:10:30 2008 +0100
+
+ powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2f2a5c3714d17f4ead18b713128b7226e0e822f4
+Author: Howard Gregory <Greg.Howard@freescale.com>
+Date: Tue Nov 4 14:55:33 2008 +0800
+
+ mpc83xx: Improve the performance of DDR memory
+
+ modify the CAS timings. my understanding is that these
+ settings decrease various wait times in the DDR interface.
+ Because these wait times are in clock cycles, and the DDR
+ clock on the 8315 RDB runs slower than on some other 83xx
+ platforms, we can dial down these values without a problem,
+ thereby decreasing the latency of memory a little.
+
+ Signed-off-by: Howard Gregory <Greg.Howard@freescale.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8000b086b33a5a81f3f390f37e178db7956dc08b
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Fri Oct 24 14:55:33 2008 +0200
+
+ ARM: Add Apollon UBI support
+
+ To enable UBI on Apollon you need to uncomment the CONFIG_SYS_USE_UBI
+ macro.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 694a0b3f1c0accd0de94b89555155d69f8022824
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 11:47:05 2008 +0100
+
+ UBI: Add UBI command support
+
+ This patch adds these UBI commands:
+
+ ubi part [nand|onenand] [part] - Show or set current partition
+ ubi info [l[ayout]] -Display volume and UBI layout information
+ ubi create[vol] volume [size] [type] - Create volume name with size
+ ubi write[vol] address volume size - Write volume from address with size
+ ubi read[vol] address volume [size] - Read volume to address with size
+ ubi remove[vol] volume - Remove volume
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 58be3a1056d88c6d05f3e914389282807e69923a
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:38:24 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 8/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 47ae6693f54f80455ae32c2e0d995e0e4bdc15b9
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:36:36 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 7/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7e6ee7ad27de5216db1baef76f38c3429c8f4a2a
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:32:36 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 6/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c91a719daa331b5856109313371e4ece5ec06d96
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:28:06 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 5/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f412fefa079c6aa9a9763f6869bf787ea6bf6e1b
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:27:23 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 4/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2d262c4853cb5b6ddce1a28a9641f2de3688d7ea
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:26:54 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 3/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 961df83361aff9a14f226214224eb8a06e05ba24
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:25:44 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 2/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f399d4a281713d5ef2d764f05d545fe61e3bd569
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:23:06 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 1/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e29c22f5abe6e0f4baa6251efed6074cdfc3db79
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:20:36 2008 +0100
+
+ MTD: Add MTD paritioning infrastructure
+
+ This MTD part infrastructure will be used by the upcoming
+ UBI support.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9b827cf1720acda2473afa516956eab6f7cca9a1
+Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+Date: Thu Oct 16 22:54:03 2008 +0530
+
+ Align end of bss by 4 bytes
+
+ Most of the bss initialization loop increments 4 bytes
+ at a time. And the loop end is checked for an 'equal'
+ condition. Make the bss end address aligned by 4, so
+ that the loop will end as expected.
+
+ Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3f510db522d160179dff3ddcce9b18f6241c2c24
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Nov 10 19:45:35 2008 -0600
+
+ mpc8641: fix address-cells default in old .dts detection
+
+ address-cells defaults to 2, not 1; so in the unlikely
+ event that it isn't specified, this patch is required
+ for correct operation.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit d025aa4b20a0618a2bada0132a9a0a4afb717f1a
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Oct 31 17:14:39 2008 -0500
+
+ lib_ppc: Move trap_init to occur earlier
+
+ Doing trap_init immediately once we're running from RAM
+ means we're no longer dependent on the physical location of
+ the flash on non-BookE platforms. Before trap_init, those
+ platforms switch to real mode and go to 0xfff00100 on exception.
+ After the switch, they go to 0x00000100 This makes it easier to
+ move the flash location.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit d52082b12c6e545705a19433a2f4142526536189
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Nov 7 13:46:19 2008 -0600
+
+ mpc8641: Try to detect old .dts files
+
+ Since we've changed the memory map of the board, be nice and
+ add some checking to try to catch out-of-date .dts files. We do
+ this by checking the CCSRBAR location in the .dts and comparing
+ it to the CCSRBAR location in u-boot. If they don't match, a
+ warning msg is printed. This isn't foolproof, but it's simple and
+ will catch most of the cases where an out-of-date .dts is present,
+ including all of the cases where a new u-boot is used with an old
+ standard MPC8641 .dts file as supplied with Linux.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 8db0400a27839f91c047dcb83f4a0f09e054a180
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Thu Nov 6 13:04:09 2008 -0600
+
+ toplevel Makefile: Add MPC8641HPCN_36BIT target
+
+ This will enable CONFIG_PHYS_36BIT for MPC8641HPCN.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 3111d32c494e8251b90917447796a7206b757e1e
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Thu Nov 6 17:37:35 2008 -0600
+
+ mpc8641: Support 36-bit physical addressing
+
+ This patch creates a memory map with all the devices
+ in 36-bit physical space, in addition to the 32-bit map.
+ The CCSR relocation is moved (again, sorry) to
+ allow for the physical address to be 36 bits - this
+ requires translation to be enabled. With 36-bit physical
+ addressing enabled, we are no longer running with VA=PA
+ translations. This means we have to distinguish between
+ the two in the config file. The existing region name is
+ used to indicate the virtual address, and a _PHYS variety
+ is created to represent the physical address.
+
+ Large physical addressing is not enabled by default.
+ Set CONFIG_PHYS_64BIT in the config file to turn this on.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit c759a01a0022de9378a3a761f49786f87684c916
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Thu Nov 6 17:36:04 2008 -0600
+
+ mpc8641: Change 32-bit memory map
+
+ The memory map on the 8641hpcn is modified to look more like
+ the 85xx boards; this is a step towards a more standardized
+ layout going forward. As part of this change, we now relocate
+ the flash.
+
+ The regions for some of the mappings were far larger than they
+ needed to be. I have reduced the mappings to match the
+ actual sizes supported by the hardware.
+
+ In addition I have removed the comments at the head
+ of the BAT blocks in the config file, rather than updating
+ them. These get horribly out of date, and it's a simple
+ matter to look at the defines to see what they are set to
+ since everything is right here in the same file.
+
+ Documentation has been changed to reflect the new map, as this
+ change is user visible, and affects the OS which runs post-uboot.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit bf9a8c34309ed9276258295db9e9212aabb2531a
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:35 2008 -0600
+
+ mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY
+
+ We define CONFIG_MONITOR_BASE_EARLY to define the initial location
+ of the bootpage in flash. Use this to create an early mapping
+ definition for the FLASH, and change the early_bats code to use this.
+
+ This change facilitates the relocation of the flash since the early
+ mappings are no longer tied to the final location of the flash.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit c1e1cf69547b138173f87a7f81c42a5d8dbfde3d
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:34 2008 -0600
+
+ mpc86xx: Use SRR0/1/rfi to enable address translation, not blr
+
+ Using a mtmsr/blr means that you have to be executing at the
+ same virtual address once you enable translation. This is
+ unnecessarily restrictive, and is not really how this is
+ usually done. Change it to use the more common mtspr SRR0/SRR1
+ and rfi method.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 6bf98b1362f0cb237620355ed3e6762fff82388d
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:33 2008 -0600
+
+ mpc8641: make DIAG_ADDR == FLASH_BASE
+
+ Currently, that's what it is, but it's hardcoded.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 170deacb1ddc39164bdb68f3963e0c0456a5369b
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:32 2008 -0600
+
+ mpc8641: Drop imaginary second flash bank, map 8MB
+
+ There's a lot of setup and foo for the second flash
+ bank. The problem is, this board doesn't actually have one.
+ Clean this up. Also, the flash is 8M in size. Get rid
+ of the confusing aliased overmapping, and just map 8M.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 0f2d66027bfc60dc7eea2f096af8891988c5abe4
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:31 2008 -0600
+
+ mpc8641: only define CONFIG_ENV_SIZE once
+
+ It's currently defined twice inside in an if/else block, but
+ both halves set the same value. Move the define outside
+ the if.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 24bfb48c35fed6ad1f047e3e4a27df302482cd93
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:30 2008 -0600
+
+ mpc86xx: Move setup_bats into cpu_init_f
+
+ In order to later allow for a physical relocation of the
+ flash, setup_bats, which sets up the final BAT mapping
+ for the board, needs to happen *after* init_laws().
+ Otherwise, there will be no window programmed for the flash
+ at the new physical location at the point when we change
+ the mmu translation.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 05df3e5a638be8c5b0899eae1766bbe8e4b92c17
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:29 2008 -0600
+
+ mpc8641: Remove extra "0" from BR2 define
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit edf3fe7d39a1ee07353128af5221422ce9ccfad6
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Oct 23 09:08:18 2008 -0400
+
+ drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver.
+
+ Copied over the fixed PHY driver as used in pp4xx/4xx_enet.c.
+ This adds support for PHY-less MAC connections to the UEC.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 54bdcc9fb6670afde9c26dcf364f582879bf21d6
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 23 16:27:24 2008 +0000
+
+ ColdFire: Add mii driver in drivers/net
+
+ All CF platforms' mii.c are consolidated into one
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 25a859066b3af1070eb69f12022113c0a91bd813
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Oct 27 23:53:17 2008 -0700
+
+ Moved initialization of PPC4xx EMAC to cpu_eth_init()
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 4d03a4e20e58552cb96d61a0e8b56cdb6cc60126
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Nov 9 21:29:23 2008 -0800
+
+ Moved PPC4xx EMAC driver to drivers/net
+
+ Also changed path in all linker scripts that reference this driver
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 96e21f86e8266ed40759e5495ee461265d7f6d28
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Oct 27 23:50:15 2008 -0700
+
+ Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
+
+ All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 9eb79bd8856bcab896ed5e1f1bca159807a124dd
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Oct 23 22:02:49 2008 -0700
+
+ Moved initialization of MPC8XX SCC to cpu_eth_init()
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a9bec96d6359ac9f90a852962bf3040cad9e0256
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Oct 22 23:47:51 2008 -0700
+
+ Moved initialization of MPC8220 FEC to cpu_eth_init()
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0e8454e990385a58f708c2fc26d31ac041c7a6c5
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Oct 22 23:32:48 2008 -0700
+
+ Moved initialization of QE Ethernet controller to cpu_eth_init()
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3456a148276d5494b53ee40242efb6462d163504
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Oct 22 23:20:29 2008 -0700
+
+ Moved initialization of FCC Ethernet controller to cpu_eth_init
+
+ Affected boards:
+ Several MPC8xx boards
+ Several MPC8260/MPC8272 boards
+ Several MPC85xx boards
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 62e15b497f5c6334c059512678c8db7940ae4c61
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Oct 30 22:15:35 2008 -0700
+
+ Fix typo in cpu/mpc85xx/cpu.c
+
+ CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 5dfb3ee3f54e2382a08d72906f0e79ecf944f6e3
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sun Oct 19 12:08:50 2008 +0900
+
+ net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init
+
+ This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init
+ as a part of ongoing eth_initialize cleanup work. The function ret value
+ is also fixed as it should be negative on fail.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit cc94074ecac1885d18ddb683eb934b3c0268aa5b
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Fri Sep 5 01:55:22 2008 -0400
+
+ Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init()
+
+ Also, removed the driver initialization from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f2a7806fc23e82d30c8548911369e0c530607354
+Author: Clive Stubbings <uboot@xentech.co.uk>
+Date: Mon Oct 27 15:05:00 2008 +0000
+
+ xilinx_emaclite buffer overrun
+
+ Patch to fix buffer allocation size and alignment. Buffer needs to be u32 aligned and
+ PKTSIZE_ALIGN bytes long.
+
+ Acked-by: Michal Simek <monstr@monstr.eu>
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0115b1953718a2969f6469d3d5da51ba11e12d42
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date: Fri Sep 26 08:59:12 2008 -0400
+
+ NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg.
+
+ The current uec_miiphy_read and uec_miiphy_write hardcode access devlist[0]
+ This patch makes these function use the devname argument that is passed in to
+ allow access to the phy registers of other devices in devlist[].
+
+ Signed-of-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 44dcb7332033db8de2810f2fffcae3084f15c8d4
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date: Mon Oct 6 15:31:43 2008 -0400
+
+ Adds two more ethernet interface to 83xx
+
+ Fixed compiler warning "declared but unused" eth5_uec_info and eth6_uec_info.
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d8003fa03733901b73d6c4667b4d80fc8eb1ddd3
+Author: Stelian Pop <stelian@popies.net>
+Date: Fri Nov 7 13:54:31 2008 +0100
+
+ AT91: Replace AT91_BASE_EMAC by the board specific values.
+
+ AT91_BASE_EMAC is never used outside the board specific files,
+ so replace its usage by the board specific AT91xxx_BASE_EMAC.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c91e17affa175ce06afa89b04752301eb4a61666
+Author: Stelian Pop <stelian@popies.net>
+Date: Fri Nov 7 12:09:21 2008 +0100
+
+ AT91: Replace (undefined) AT91_ID_US* by the board specific values.
+
+ AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined.
+ Since they are never used outside the board specific files, they can
+ be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 /
+ AT91xxx_ID_US2.
+
+ Bug spotted by Jesus Alvarez <jalvarez@micromint.com>.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 28962f5a2de81bc0eed1c0b08c6bfaa1cc134ea2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 1 10:47:59 2008 +0100
+
+ Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1079432e04ccf71aa3684181186182cd63512f19
+Author: Sergey Lapin <slapin@ossfans.org>
+Date: Fri Oct 31 12:28:43 2008 +0100
+
+ Custom AFEB9260 board support
+
+ This patch provides support for AFEB9260 board, a product of
+ OpenSource hardware and software. Some commertial projects
+ are made with this design. A board is basically AT91SAM9260-EK
+ with some modifications and different peripherals and different
+ parts used. Main purpose of this project is to gain experience in
+ hardware design.
+ More info: http://groups.google.com/group/arm9fpga-evolution-board
+ (In Russian only, sorry).
+ Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
+
+ Signed-off-by: Sergey Lapin <slapin@ossfans.org>
+
+commit 26eecd24f97130e56e9c2c2af0e714e05bce6e00
+Author: Tomohiro Masubuchi <tomohiro_masubuchiattripeaks.co.jp>
+Date: Tue Oct 21 13:17:16 2008 +0900
+
+ Change to use "do_div" macro
+
+ Signed-off-by: Tomohiro Masubuchi <tomohiro_masubuchi@tripeaks.co.jp>
+
+commit e352495318d8056a00faa21b633b3e4374bfbf52
+Author: Roman Mashak <romez777@gmail.com>
+Date: Wed Oct 22 16:00:26 2008 -0400
+
+ ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory
+
+ OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory.
+ It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap
+
+ Signed-off-by: Roman Mashak <romez777@gmail.com>
+
+commit 248b2c367210c06dbd5fbdecf27e97fbe9d05fdb
+Author: Roman Mashak <romez777@gmail.com>
+Date: Tue Oct 21 03:01:41 2008 -0700
+
+ ARM/Versatile port: Removed unused functions
+
+ Removal of never used functions.
+
+ Signed-off-by: Roman Mashak <romez777@gmail.com>
+
+commit 1266df887781c779deaf6d05eea2ef90a470cb34
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Nov 3 15:44:01 2008 -0600
+
+ powerpc: change 86xx SMP boot method
+
+ We put the bootpg for the secondary cpus into memory and use
+ BPTR to get to it. This is a step towards converting to the
+ ePAPR boot methodology. Also, the code is written to
+ deal properly with more than 4GB of RAM.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit b5431560682d8f318fbc49db87cfe13ab41d2ee4
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Oct 31 17:13:49 2008 -0500
+
+ 8641HPCN: Config file cleanup
+
+ There are several items in the config file that were hardcoded
+ but that should really be based on other config options, since
+ the regions are contiguous and depend on being so. This cleans
+ that up a bit. Also, add BR_PHYS_ADDR() macro to convert
+ addresses into the proper format for BR registers.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 4c77de3f144ca088c3867bd6240718c10f5a9d69
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Oct 31 17:13:32 2008 -0500
+
+ 86xx: Make dram_size a phys_size_t
+
+ It's currently a long and should be phys_size_t.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 104992fc541302a6bac74448e01e7fdad20abca0
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Sun Nov 2 18:19:32 2008 -0600
+
+ powerpc 86xx: Handle CCSR relocation earlier
+
+ Currently, the CCSR gets relocated while translation is
+ enabled, meaning we need 2 BAT translations to get to both the
+ old location and the new location. Also, the DEFAULT
+ CCSR location has a dependency on the BAT that maps the
+ FLASH region. Moving the relocation removes this unnecessary
+ dependency. This makes it easier and more intutive to
+ modify the board's memory map.
+
+ Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same
+ BAT for CCSR space.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit af5d100e8d5cd49d69d52d20f1181eb06ddb4ddf
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Oct 31 17:14:14 2008 -0500
+
+ mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build
+
+ You can't actually have both, and with some coming changes to
+ change the memory map for the board and support 36-bit physical,
+ we need the extra BAT that is being consumed by having both.
+
+ I also make non-PCI configs build cleanly, for the sake of sanity.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 98693b85d42ff438375dc6d6dcadc70eb7b050bb
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Oct 31 17:14:00 2008 -0500
+
+ mpc8641: Stop supporting non-PCI_PNP configs
+
+ We don't actually ever do this, remove the code so we
+ can stop maintaining it.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit e4f69d1bd21a12049744989d2dd6b5199c9b8f23
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Fri Oct 24 12:59:12 2008 +0000
+
+ ColdFire: Fix M5329EVB and M5373EVB nand issue
+
+ Fix compilation issue caused by a few mismatches.
+ Provide proper nand chip select enable/disable in
+ nand_hwcontrol() rather than in board_nand_init()
+ just enable once. Remove redundant local nand driver
+ functions - nand_read_byte(), nand_write_byte() and
+ nand_dev_ready() to use common nand driver.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 1b2708442224a551a0b865b52710306333888932
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Oct 22 11:55:30 2008 +0000
+
+ ColdFire: Fix compilation error
+
+ The error was caused by the change for strmhz() in cpu.c.
+ A few of them were one extra close parenthesis.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 536e7dac16769954915a484e682a2efb28699133
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Oct 22 11:38:21 2008 +0000
+
+ ColdFire: Add MCF5301x CPU and M53017EVB support
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit a21d0c2cc9add8894d971ab791f4032f077db817
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 15:37:02 2008 +0000
+
+ ColdFire: Add SBF support for M52277EVB
+
+ Add serial boot support
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit b202816c61042c183fe67d097a5893b0f2dafba0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 14:19:26 2008 +0000
+
+ ColdFire: Use CFI driver for M5272C3
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit f3962d3f574e5a1cffacd4e9bc48713060a2a314
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 13:47:54 2008 +0000
+
+ ColdFire: Relocate FEC's GPIO and mii functions protocols
+
+ Place FEC pin assignments in cpu_init.c from platform's
+ mii.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 6e80f5aa09f8d41bac50b38dc7488ecd22107802
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 12:15:44 2008 +0000
+
+ ColdFire: Remove platforms mii.c file
+
+ Will use mcfmii.c driver in drivers/net rather than
+ keep creating new mii.c for each future platform.
+ Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB,
+ M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB,
+ M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's
+ mii.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 012522fef3b382469125beb46a315ab4dee02fb0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 10:03:07 2008 +0000
+
+ ColdFire: Modules header files cleanup
+
+ Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG,
+ MDHA, SKHA, INTC, and FlexBus structures and
+ definitions in immap_5xxx.h to more unify modules
+ header files. Append DSPI support for m547x_8x.
+ SSI cleanup. Remove USB Host structure from immap_539.h.
+ Apply changes to use FlexBus structures in mcf52x2's
+ cpu_init.c and platform configuration files.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit ac2331aee99ad36be0fcfed8c49922e3c61b576d
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 08:52:36 2008 +0000
+
+ ColdFire: Remove linker file
+
+ Each different build for M54455EVB and M5235EVB will
+ create a u-boot.lds linker file. It is redundant to
+ keep the u-boot.lds
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 0829323073c505556ed5f5073f91adb504584d45
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Oct 31 11:26:44 2008 -0500
+
+ ppc: Fix compile warnings when !CONFIG_OF_LIBFDT
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a80b21d5127583171d6e9bc7f722947641898012
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 31 12:12:12 2008 +0100
+
+ common/Makefile: create others group for non core, environment and command files
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 60c68d9c1c6d18ce02c862a05718fd94f97c13d0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Oct 31 01:13:37 2008 +0100
+
+ TQM8260: use CFI flash driver instead of custom driver.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 20d04774f4ef3f6e38974636e0e36ae0f0b5501f
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 17:35:30 2008 -0500
+
+ Consolidate MAX/MIN definitions
+
+ There were several, now there is one (two if you count the lower-case
+ versions).
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 298e476c66fd88d0bc4f0371118652d2b5de4e8a
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Oct 30 09:23:09 2008 +0100
+
+ mgsuvd: remove unused defines in config file.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3cbd823116ea8b7c654e275a8c2fca87cd1f5dc5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Nov 2 16:14:22 2008 +0100
+
+ Coding Style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit a47f957ab523019992fdef857af01bd71c58a4da
Author: Alessandro Rubini <rubini-list@gnudd.com>
Date: Fri Oct 31 22:33:21 2008 +0100
diff --git a/board/afeb9260/partition.c b/board/afeb9260/partition.c
index 0b5dc5e..be08f29 100644
--- a/board/afeb9260/partition.c
+++ b/board/afeb9260/partition.c
@@ -34,4 +34,3 @@ dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
{0x00008400, 0x00041FFF, FLAG_PROTECT_CLEAR, 0, "U-Boot"},
};
-
diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c
index 4c35892..5c31f7b 100644
--- a/common/cmd_ubi.c
+++ b/common/cmd_ubi.c
@@ -601,7 +601,7 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(ubi, 6, 1, do_ubi,
"ubi - ubi commands\n",
- "part [nand|nor|onenand] [part]"
+ "part [nand|nor|onenand] [part]"
" - Show or set current partition\n"
"ubi info [l[ayout]]"
" - Display volume and ubi layout information\n"
diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c
index 18308c8..66f9164 100644
--- a/cpu/mcf52x2/cpu_init.c
+++ b/cpu/mcf52x2/cpu_init.c
@@ -131,7 +131,7 @@ void cpu_init_f(void)
mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */
mbar2_writeByte(MCFSIM_SPURVEC, 0x00);
- /*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); *//* Enable a 1 cycle pre-drive cycle on CS1 */
+ /*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); */ /* Enable a 1 cycle pre-drive cycle on CS1 */
/* FlexBus Chipselect */
init_fbcs();
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index 6645cb8..63cc8db 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -982,5 +982,3 @@ unlock_ram_in_cache:
blr
#endif
#endif
-
-
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 1f0b56c..d09c4c2 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -706,4 +706,3 @@ int cpu_eth_init(bd_t *bis)
#endif
return 0;
}
-
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 4b5349e..f2b8908 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -727,7 +727,7 @@ _start:
ori r2,r2,0xffff
mfdcr r1,ISRAM1_DPC
and r1,r1,r2 /* Disable parity check */
- mtdcr ISRAM1_DPC,r1
+ mtdcr ISRAM1_DPC,r1
mfdcr r1,ISRAM1_PMEG
and r1,r1,r2 /* Disable pwr mgmt */
mtdcr ISRAM1_PMEG,r1
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index f12dedf..a27de5a 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -434,4 +434,3 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
send_stop();
return(failures);
}
-
diff --git a/drivers/mtd/ubi/crc32.c b/drivers/mtd/ubi/crc32.c
index 5273ca3..a7e26b0 100644
--- a/drivers/mtd/ubi/crc32.c
+++ b/drivers/mtd/ubi/crc32.c
@@ -97,7 +97,7 @@ u32 crc32_le(u32 crc, unsigned char const *p, size_t len)
# else
# define DO_CRC(x) crc = tab[ ((crc >> 24) ^ (x)) & 255] ^ (crc<<8)
# endif
- //printf("Crc32_le crc=%x\n",crc);
+ /* printf("Crc32_le crc=%x\n",crc); */
crc = __cpu_to_le32(crc);
/* Align it */
if((((long)b)&3 && len)){
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 2d44f23..8423894 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -186,7 +186,7 @@ retry:
if (read != len && err == -EBADMSG) {
ubi_assert(0);
printk("%s[%d] not here\n", __func__, __LINE__);
-// err = -EIO;
+/* err = -EIO; */
}
} else {
ubi_assert(len == read);
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index a87a2f3..061da64 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -260,7 +260,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
goto out_unlock;
}
- /* Calculate how many eraseblocks are requested */
+ /* Calculate how many eraseblocks are requested */
vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment;
bytes = req->bytes;
if (do_div(bytes, vol->usable_leb_size))
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index d0e3cda..f9f1002 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -490,7 +490,7 @@
#endif
/* Memory Bank 1 (RESET) initialization */
-#define CONFIG_SYS_EBC_PB1AP 0x7f817200 //0x03017200
+#define CONFIG_SYS_EBC_PB1AP 0x7f817200 /* 0x03017200 */
#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_RESET_BASE | 0x1c000)
/* Memory Bank 4 (FPGA / 32Bit) initialization */
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index 90e553d..d63a1a0 100644
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -167,4 +167,3 @@
#endif
#endif
-
diff --git a/include/linux/crc32.h b/include/linux/crc32.h
index e133157..ac4aed1 100644
--- a/include/linux/crc32.h
+++ b/include/linux/crc32.h
@@ -6,10 +6,10 @@
#define _LINUX_CRC32_H
#include <linux/types.h>
-//#include <linux/bitrev.h>
+/* #include <linux/bitrev.h> */
extern u32 crc32_le(u32 crc, unsigned char const *p, size_t len);
-//extern u32 crc32_be(u32 crc, unsigned char const *p, size_t len);
+/* extern u32 crc32_be(u32 crc, unsigned char const *p, size_t len); */
#define crc32(seed, data, length) crc32_le(seed, (unsigned char const *)data, length)
@@ -21,7 +21,7 @@ extern u32 crc32_le(u32 crc, unsigned char const *p, size_t len);
* is in bit nr 0], thus it must be reversed before use. Except for
* nics that bit swap the result internally...
*/
-//#define ether_crc(length, data) bitrev32(crc32_le(~0, data, length))
-//#define ether_crc_le(length, data) crc32_le(~0, data, length)
+/* #define ether_crc(length, data) bitrev32(crc32_le(~0, data, length)) */
+/* #define ether_crc_le(length, data) crc32_le(~0, data, length) */
#endif /* _LINUX_CRC32_H */
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index b41e5f5..1016675 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -76,9 +76,9 @@ struct device;
struct device_node;
int __devinit of_mtd_parse_partitions(struct device *dev,
- struct mtd_info *mtd,
- struct device_node *node,
- struct mtd_partition **pparts);
+ struct mtd_info *mtd,
+ struct device_node *node,
+ struct mtd_partition **pparts);
#endif
#endif
diff --git a/include/linux/mtd/ubi.h b/include/linux/mtd/ubi.h
index a017891..4b3e06c 100644
--- a/include/linux/mtd/ubi.h
+++ b/include/linux/mtd/ubi.h
@@ -21,7 +21,7 @@
#ifndef __LINUX_UBI_H__
#define __LINUX_UBI_H__
-//#include <asm/ioctl.h>
+/* #include <asm/ioctl.h> */
#include <linux/types.h>
#include <mtd/ubi-user.h>
diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h
index 095dfc1..b415219 100644
--- a/include/ubi_uboot.h
+++ b/include/ubi_uboot.h
@@ -56,7 +56,7 @@ do { \
#define ubi_sysfs_close(...) do { } while (0)
static inline int is_power_of_2(unsigned long n)
{
- return (n != 0 && ((n & (n - 1)) == 0));
+ return (n != 0 && ((n & (n - 1)) == 0));
}
/* FIXME */