diff options
| -rw-r--r-- | board/freescale/p2041rdb/Makefile | 1 | ||||
| -rw-r--r-- | board/freescale/p2041rdb/eth.c | 225 | ||||
| -rw-r--r-- | board/freescale/p2041rdb/p2041rdb.c | 4 | ||||
| -rw-r--r-- | include/configs/P2041RDB.h | 6 |
4 files changed, 235 insertions, 1 deletions
diff --git a/board/freescale/p2041rdb/Makefile b/board/freescale/p2041rdb/Makefile index 65f348f..b4cb83e 100644 --- a/board/freescale/p2041rdb/Makefile +++ b/board/freescale/p2041rdb/Makefile @@ -29,6 +29,7 @@ LIB = $(obj)lib$(BOARD).o COBJS-y += $(BOARD).o COBJS-y += cpld.o COBJS-y += ddr.o +COBJS-y += eth.o COBJS-y += law.o COBJS-y += tlb.o COBJS-$(CONFIG_PCI) += pci.o diff --git a/board/freescale/p2041rdb/eth.c b/board/freescale/p2041rdb/eth.c new file mode 100644 index 0000000..0a1dfa7 --- /dev/null +++ b/board/freescale/p2041rdb/eth.c @@ -0,0 +1,225 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Author: Mingkai Hu <Mingkai.hu@freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * The RGMII PHYs are provided by the two on-board PHY. The SGMII PHYs + * are provided by the three on-board PHY or by the standard Freescale + * four-port SGMII riser card. We need to change the phy-handle in the + * kernel dts file to point to the correct PHY according to serdes mux + * and serdes protocol selection. + */ + +#include <common.h> +#include <netdev.h> +#include <asm/fsl_serdes.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <malloc.h> +#include <asm/fsl_dtsec.h> + +#include "cpld.h" +#include "../common/fman.h" + +#ifdef CONFIG_FMAN_ENET +/* + * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means + * that the mapping must be determined dynamically, or that the lane maps to + * something other than a board slot + */ +static u8 lane_to_slot[] = { + 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 2, 2, 2, 2, 0, 0, 0, 0 +}; + +static int riser_phy_addr[] = { + CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR, + CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR, + CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR, + CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR, +}; + +/* + * Initialize the lane_to_slot[] array. + * + * On the P2040RDB board the mapping is controlled by CPLD register. + */ +static void initialize_lane_to_slot(void) +{ + u8 mux = CPLD_READ(serdes_mux); + + lane_to_slot[6] = (mux & SERDES_MUX_LANE_6_MASK) ? 0 : 1; + lane_to_slot[10] = (mux & SERDES_MUX_LANE_A_MASK) ? 0 : 2; + lane_to_slot[12] = (mux & SERDES_MUX_LANE_C_MASK) ? 0 : 2; + lane_to_slot[13] = (mux & SERDES_MUX_LANE_D_MASK) ? 0 : 2; +} + +/* + * Given the following ... + * + * 1) A pointer to an Fman Ethernet node (as identified by the 'compat' + * compatible string and 'addr' physical address) + * + * 2) An Fman port + * + * ... update the phy-handle property of the Ethernet node to point to the + * right PHY. This assumes that we already know the PHY for each port. + * + * The offset of the Fman Ethernet node is also passed in for convenience, but + * it is not used, and we recalculate the offset anyway. + * + * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC. + * Inside the Fman, "ports" are things that connect to MACs. We only call them + * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs + * and ports are the same thing. + * + */ +void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, + enum fm_port port, int offset) +{ + phy_interface_t intf = fm_info_get_enet_if(port); + char phy[16]; + + /* The RGMII PHY is identified by the MAC connected to it */ + if (intf == PHY_INTERFACE_MODE_RGMII) { + sprintf(phy, "phy_rgmii_%u", port == FM1_DTSEC5 ? 0 : 1); + fdt_set_phy_handle(fdt, compat, addr, phy); + } + + /* The SGMII PHY is identified by the MAC connected to it */ + if (intf == PHY_INTERFACE_MODE_SGMII) { + int lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + port); + u8 slot; + if (lane < 0) + return; + slot = lane_to_slot[lane]; + if (slot) { + sprintf(phy, "phy_sgmii_%x", + CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR + + (port - FM1_DTSEC1)); + fdt_set_phy_handle(fdt, compat, addr, phy); + } else { + sprintf(phy, "phy_sgmii_%x", + CONFIG_SYS_FM1_DTSEC1_PHY_ADDR + + (port - FM1_DTSEC1)); + fdt_set_phy_handle(fdt, compat, addr, phy); + } + } + + if (intf == PHY_INTERFACE_MODE_XGMII) { + /* XAUI */ + int lane = serdes_get_first_lane(XAUI_FM1); + if (lane >= 0) { + /* The XAUI PHY is identified by the slot */ + sprintf(phy, "phy_xgmii_%u", lane_to_slot[lane]); + fdt_set_phy_handle(fdt, compat, addr, phy); + } + } +} +#endif /* #ifdef CONFIG_FMAN_ENET */ + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_FMAN_ENET + struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR; + struct fsl_pq_mdio_info dtsec_mdio_info; + struct tgec_mdio_info tgec_mdio_info; + unsigned int i, slot; + int lane; + + printf("Initializing Fman\n"); + + initialize_lane_to_slot(); + + /* + * Set TBIPA on FM1@DTSEC1. This is needed for configurations + * where FM1@DTSEC1 isn't used directly, since it provides + * MDIO for other ports. + */ + out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE); + + dtsec_mdio_info.regs = + (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR; + dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the real 1G MDIO bus */ + fsl_pq_mdio_init(bis, &dtsec_mdio_info); + + tgec_mdio_info.regs = + (struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; + tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; + + /* Register the real 10G MDIO bus */ + fm_tgec_mdio_init(bis, &tgec_mdio_info); + + /* + * Program the three on-board SGMII PHY addresses. If the SGMII Riser + * card used, we'll override the PHY address later. For any DTSEC that + * is RGMII, we'll also override its PHY address later. We assume that + * DTSEC4 and DTSEC5 are used for RGMII. + */ + fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR); + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + int idx = i - FM1_DTSEC1; + + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx); + if (lane < 0) + break; + slot = lane_to_slot[lane]; + if (slot) + fm_info_set_phy_address(i, riser_phy_addr[i]); + break; + case PHY_INTERFACE_MODE_RGMII: + /* Only DTSEC4 and DTSEC5 can be routed to RGMII */ + fm_info_set_phy_address(i, i == FM1_DTSEC5 ? + CONFIG_SYS_FM1_DTSEC5_PHY_ADDR : + CONFIG_SYS_FM1_DTSEC4_PHY_ADDR); + break; + default: + printf("Fman1: DTSEC%u set to unknown interface %i\n", + idx + 1, fm_info_get_enet_if(i)); + break; + } + + fm_info_set_mdio(i, + miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); + } + + lane = serdes_get_first_lane(XAUI_FM1); + if (lane >= 0) { + slot = lane_to_slot[lane]; + if (slot) + fm_info_set_phy_address(FM1_10GEC1, + CONFIG_SYS_FM1_10GEC1_PHY_ADDR); + } + + fm_info_set_mdio(FM1_10GEC1, + miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME)); + cpu_eth_init(bis); +#endif + + return pci_eth_init(bis); +} diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c index 52269d3..6ed404f 100644 --- a/board/freescale/p2041rdb/p2041rdb.c +++ b/board/freescale/p2041rdb/p2041rdb.c @@ -32,6 +32,7 @@ #include <asm/fsl_serdes.h> #include <asm/fsl_portals.h> #include <asm/fsl_liodn.h> +#include <fm_eth.h> extern void pci_of_setup(void *blob, bd_t *bd); @@ -200,4 +201,7 @@ void ft_board_setup(void *blob, bd_t *bd) #endif fdt_fixup_liodn(blob); +#ifdef CONFIG_SYS_DPAA_FMAN + fdt_fixup_fman_ethernet(blob); +#endif } diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 03dbe55..37e98bb 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -405,7 +405,6 @@ #define CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_DPAA_PME /* Default address of microcode for the Linux Fman driver */ -#define CONFIG_SYS_FMAN_FW #if defined(CONFIG_SPIFLASH) /* * env is stored at 0x100000, sector size is 0x10000, ucode is stored after @@ -429,6 +428,9 @@ #ifdef CONFIG_SYS_DPAA_FMAN #define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_TERANETICS #endif #ifdef CONFIG_PCI @@ -472,6 +474,8 @@ #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f +#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0 + #define CONFIG_SYS_TBIPA_VALUE 8 #define CONFIG_MII /* MII PHY management */ #define CONFIG_ETHPRIME "FM1@DTSEC1" |