diff options
99 files changed, 5732 insertions, 639 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 2daee7d..c430574 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -565,6 +565,10 @@ Albert ARIBAUD <albert.u.boot@aribaud.net> edminiv2 ARM926EJS (Orion5x SoC) +Raphael Assenat <raph@8d.com> + + eco5pk ARM ARMV7 (AM35x SoC) + Stefano Babic <sbabic@denx.de> ea20 davinci @@ -896,6 +900,10 @@ Michal Simek <monstr@monstr.eu> zynq ARM ARMV7 (Zynq SoC) +Lucas Stach <dev@lynxeye.de> + + colibri_t20_iris Tegra20 (ARM7 & A9 Dual Core) + Nick Thompson <nick.thompson@gefanuc.com> da830evm ARM926EJS (DA830/OMAP-L137) @@ -1005,6 +1013,10 @@ Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> armadillo-800eva R8A7740 (RMOBILE SoC) +Pali Rohár <pali.rohar@gmail.com> + + nokia_rx51 ARM ARMV7 (OMAP34xx SoC) + ------------------------------------------------------------------------- Unknown / orphaned boards: @@ -516,17 +516,18 @@ $(obj)u-boot.spr: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin ifeq ($(SOC),tegra20) ifeq ($(CONFIG_OF_SEPARATE),y) -$(obj)u-boot-dtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(obj)u-boot.dtb - $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin - cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(obj)u-boot.dtb > $@ - rm $(obj)spl/u-boot-spl-pad.bin +nodtb=dtb +dtbfile=$(obj)u-boot.dtb else -$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin +nodtb=nodtb +dtbfile= +endif + +$(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtbfile) $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin - cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@ + cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(dtbfile) > $@ rm $(obj)spl/u-boot-spl-pad.bin endif -endif ifeq ($(CONFIG_SANDBOX),y) GEN_UBOOT = \ @@ -661,6 +661,10 @@ The following options need to be configured: additional board info beside the logo + When CONFIG_CFB_CONSOLE_ANSI is defined, console will support + a limited number of ANSI escape sequences (cursor control, + erase functions and limited graphics rendition control). + When CONFIG_CFB_CONSOLE is defined, video console is default i/o. Serial console can be forced with environment 'console=serial'. diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c index 7dc1a8e..41e9639 100644 --- a/arch/arm/cpu/arm1136/mx35/generic.c +++ b/arch/arm/cpu/arm1136/mx35/generic.c @@ -361,8 +361,12 @@ unsigned int mxc_get_clock(enum mxc_clock clk) return get_ipg_per_clk(); case MXC_UART_CLK: return imx_get_uartclk(); - case MXC_ESDHC_CLK: + case MXC_ESDHC1_CLK: return mxc_get_peri_clock(ESDHC1_CLK); + case MXC_ESDHC2_CLK: + return mxc_get_peri_clock(ESDHC2_CLK); + case MXC_ESDHC3_CLK: + return mxc_get_peri_clock(ESDHC3_CLK); case MXC_USB_CLK: return mxc_get_main_clock(USB_CLK); case MXC_FEC_CLK: @@ -472,7 +476,13 @@ int cpu_mmc_init(bd_t *bis) int get_clocks(void) { #ifdef CONFIG_FSL_ESDHC - gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); +#if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR + gd->sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); +#elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR + gd->sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); +#else + gd->sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); +#endif #endif return 0; } diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c index 8e763b7..623a24b 100644 --- a/arch/arm/cpu/arm720t/interrupts.c +++ b/arch/arm/cpu/arm720t/interrupts.c @@ -26,6 +26,8 @@ * MA 02111-1307 USA */ +#include <common.h> + #ifdef CONFIG_USE_IRQ void do_irq (struct pt_regs *pt_regs) { diff --git a/arch/arm/cpu/arm720t/tegra-common/spl.c b/arch/arm/cpu/arm720t/tegra-common/spl.c index 0d37ce8..c280ab7 100644 --- a/arch/arm/cpu/arm720t/tegra-common/spl.c +++ b/arch/arm/cpu/arm720t/tegra-common/spl.c @@ -23,105 +23,42 @@ * MA 02111-1307 USA */ #include <common.h> -#include <asm/u-boot.h> -#include <asm/utils.h> -#include <nand.h> -#include <mmc.h> -#include <fat.h> -#include <version.h> -#include <i2c.h> -#include <image.h> -#include <malloc.h> -#include <linux/compiler.h> #include "cpu.h" +#include <spl.h> #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/pinmux.h> #include <asm/arch/tegra.h> #include <asm/arch-tegra/board.h> -#include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra/pmc.h> -#include <asm/arch-tegra/scu.h> -#include <asm/arch-tegra/sys_proto.h> +#include <asm/arch/spl.h> -DECLARE_GLOBAL_DATA_PTR; -/* Define global data structure pointer to it*/ -static gd_t gdata __attribute__ ((section(".data"))); -static bd_t bdata __attribute__ ((section(".data"))); - -inline void hang(void) +void spl_board_init(void) { - puts("### ERROR ### Please RESET the board ###\n"); - for (;;) - ; -} + struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + + /* enable JTAG */ + writel(0xC0, &pmt->pmt_cfg_ctl); -void board_init_f(ulong dummy) -{ board_init_uart_f(); /* Initialize periph GPIOs */ gpio_early_init_uart(); - /* - * We call relocate_code() with relocation target same as the - * CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting - * skipped. Instead, only .bss initialization will happen. That's - * all we need - */ - debug(">>board_init_f()\n"); - relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE); + clock_early_init(); + preloader_console_init(); } -/* This requires UART clocks to be enabled */ -static void preloader_console_init(void) +u32 spl_boot_device(void) { - const char *u_boot_rev = U_BOOT_VERSION; - - gd = &gdata; - gd->bd = &bdata; - gd->flags |= GD_FLG_RELOC; - gd->baudrate = CONFIG_BAUDRATE; - - serial_init(); /* serial communications setup */ - - gd->have_console = 1; - - /* Avoid a second "U-Boot" coming from this string */ - u_boot_rev = &u_boot_rev[7]; - - printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE, - U_BOOT_TIME); + return BOOT_DEVICE_RAM; } -void board_init_r(gd_t *id, ulong dummy) +void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { - struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; - - /* enable JTAG */ - writel(0xC0, &pmt->pmt_cfg_ctl); - - debug(">>spl:board_init_r()\n"); - - mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START, - CONFIG_SYS_SPL_MALLOC_SIZE); - -#ifdef CONFIG_SPL_BOARD_INIT - spl_board_init(); -#endif + debug("image entry point: 0x%X\n", spl_image->entry_point); - clock_early_init(); - serial_init(); - preloader_console_init(); - - start_cpu((u32)CONFIG_SYS_TEXT_BASE); + start_cpu((u32)spl_image->entry_point); halt_avp(); - /* not reached */ -} - -int board_usb_init(const void *blob) -{ - return 0; } diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c index f870859..bc2abb6 100644 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -115,6 +115,41 @@ static void enable_per_clocks(void) while (readl(&cmwkup->wkup_uart0ctrl) != PRCM_MOD_EN) ; + /* UART1 */ +#ifdef CONFIG_SERIAL2 + writel(PRCM_MOD_EN, &cmper->uart1clkctrl); + while (readl(&cmper->uart1clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL2 */ + + /* UART2 */ +#ifdef CONFIG_SERIAL3 + writel(PRCM_MOD_EN, &cmper->uart2clkctrl); + while (readl(&cmper->uart2clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL3 */ + + /* UART3 */ +#ifdef CONFIG_SERIAL4 + writel(PRCM_MOD_EN, &cmper->uart3clkctrl); + while (readl(&cmper->uart3clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL4 */ + + /* UART4 */ +#ifdef CONFIG_SERIAL5 + writel(PRCM_MOD_EN, &cmper->uart4clkctrl); + while (readl(&cmper->uart4clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL5 */ + + /* UART5 */ +#ifdef CONFIG_SERIAL6 + writel(PRCM_MOD_EN, &cmper->uart5clkctrl); + while (readl(&cmper->uart5clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL6 */ + /* MMC0*/ writel(PRCM_MOD_EN, &cmper->mmc0clkctrl); while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN) diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c index 2709860..1c9223f 100644 --- a/arch/arm/cpu/armv7/mx5/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -338,7 +338,7 @@ static u32 get_ipg_per_clk(void) /* Get the output clock rate of a standard PLL MUX for peripherals. */ static u32 get_standard_pll_sel_clk(u32 clk_sel) { - u32 freq; + u32 freq = 0; switch (clk_sel & 0x3) { case 0: diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 529e35b..29ec957 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -26,6 +26,13 @@ .section ".text.init", "x" +.macro init_arm_erratum + /* ARM erratum ID #468414 */ + mrc 15, 0, r1, c1, c0, 1 + orr r1, r1, #(1 << 5) /* enable L1NEON bit */ + mcr 15, 0, r1, c1, c0, 1 +.endm + /* * L2CC Cache setup/invalidation/disable */ @@ -162,9 +169,9 @@ setup_pll_func: .endm .macro init_clock +#if defined (CONFIG_MX51) ldr r0, =CCM_BASE_ADDR -#if defined(CONFIG_MX51) /* Gate of clocks to the peripherals first */ ldr r1, =0x3FFFFFFF str r1, [r0, #CLKCTL_CCGR0] @@ -190,21 +197,6 @@ setup_pll_func: 1: ldr r1, [r0, #CLKCTL_CDHIPR] cmp r1, #0x0 bne 1b -#else - ldr r1, =0x3FFFFFFF - str r1, [r0, #CLKCTL_CCGR0] - str r4, [r0, #CLKCTL_CCGR1] - str r4, [r0, #CLKCTL_CCGR2] - str r4, [r0, #CLKCTL_CCGR3] - str r4, [r0, #CLKCTL_CCGR7] - - ldr r1, =0x00030000 - str r1, [r0, #CLKCTL_CCGR4] - ldr r1, =0x00FFF030 - str r1, [r0, #CLKCTL_CCGR5] - ldr r1, =0x0F00030F - str r1, [r0, #CLKCTL_CCGR6] -#endif /* Switch ARM to step clock */ mov r1, #0x4 @@ -217,7 +209,6 @@ setup_pll_func: setup_pll PLL1_BASE_ADDR, 800 #endif -#if defined(CONFIG_MX51) setup_pll PLL3_BASE_ADDR, 665 /* Switch peripheral to PLL 3 */ @@ -234,7 +225,7 @@ setup_pll_func: str r1, [r0, #CLKCTL_CBCDR] ldr r1, =0x000020C0 | CONFIG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] -#endif + setup_pll PLL3_BASE_ADDR, 216 /* Set the platform clock dividers */ @@ -244,21 +235,17 @@ setup_pll_func: ldr r0, =CCM_BASE_ADDR -#if defined(CONFIG_MX51) /* Run 3.0 at Full speed, for other TO's wait till we increase VDDGP */ ldr r3, [r4, #ROM_SI_REV] cmp r3, #0x10 movls r1, #0x1 movhi r1, #0 -#else - mov r1, #0 -#endif + str r1, [r0, #CLKCTL_CACRR] /* Switch ARM back to PLL 1 */ str r4, [r0, #CLKCTL_CCSR] -#if defined(CONFIG_MX51) /* setup the rest */ /* Use lp_apm (24MHz) source for perclk */ ldr r1, =0x000020C2 | CONFIG_SYS_DDR_CLKSEL @@ -266,7 +253,6 @@ setup_pll_func: /* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */ ldr r1, =CONFIG_SYS_CLKTL_CBCDR str r1, [r0, #CLKCTL_CBCDR] -#endif /* Restore the default values in the Gate registers */ ldr r1, =0xFFFFFFFF @@ -277,47 +263,127 @@ setup_pll_func: str r1, [r0, #CLKCTL_CCGR4] str r1, [r0, #CLKCTL_CCGR5] str r1, [r0, #CLKCTL_CCGR6] -#if defined(CONFIG_MX53) - str r1, [r0, #CLKCTL_CCGR7] -#endif -#if defined(CONFIG_MX51) /* Use PLL 2 for UART's, get 66.5MHz from it */ ldr r1, =0xA5A2A020 str r1, [r0, #CLKCTL_CSCMR1] ldr r1, =0x00C30321 str r1, [r0, #CLKCTL_CSCDR1] -#elif defined(CONFIG_MX53) + /* make sure divider effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0x0 + bne 1b + + str r4, [r0, #CLKCTL_CCDR] + + /* for cko - for ARM div by 8 */ + mov r1, #0x000A0000 + add r1, r1, #0x00000F0 + str r1, [r0, #CLKCTL_CCOSR] +#else /* CONFIG_MX53 */ + ldr r0, =CCM_BASE_ADDR + + /* Gate of clocks to the peripherals first */ + ldr r1, =0x3FFFFFFF + str r1, [r0, #CLKCTL_CCGR0] + str r4, [r0, #CLKCTL_CCGR1] + str r4, [r0, #CLKCTL_CCGR2] + str r4, [r0, #CLKCTL_CCGR3] + str r4, [r0, #CLKCTL_CCGR7] + ldr r1, =0x00030000 + str r1, [r0, #CLKCTL_CCGR4] + ldr r1, =0x00FFF030 + str r1, [r0, #CLKCTL_CCGR5] + ldr r1, =0x0F00030F + str r1, [r0, #CLKCTL_CCGR6] + + /* Switch ARM to step clock */ + mov r1, #0x4 + str r1, [r0, #CLKCTL_CCSR] + + setup_pll PLL1_BASE_ADDR, 800 + + setup_pll PLL3_BASE_ADDR, 400 + + /* Switch peripheral to PLL3 */ + ldr r0, =CCM_BASE_ADDR + ldr r1, =0x00015154 + str r1, [r0, #CLKCTL_CBCMR] + ldr r1, =0x02888945 + orr r1, r1, #(1 << 16) + str r1, [r0, #CLKCTL_CBCDR] + /* make sure change is effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0x0 + bne 1b + + setup_pll PLL2_BASE_ADDR, 400 + /* Switch peripheral to PLL2 */ ldr r0, =CCM_BASE_ADDR ldr r1, =0x00808145 - orr r1, r1, #2 << 10 - orr r1, r1, #1 << 19 + orr r1, r1, #(2 << 10) + orr r1, r1, #(0 << 16) + orr r1, r1, #(1 << 19) str r1, [r0, #CLKCTL_CBCDR] ldr r1, =0x00016154 str r1, [r0, #CLKCTL_CBCMR] - /* Change uart clk parent to pll2*/ + + /*change uart clk parent to pll2*/ ldr r1, [r0, #CLKCTL_CSCMR1] and r1, r1, #0xfcffffff orr r1, r1, #0x01000000 str r1, [r0, #CLKCTL_CSCMR1] + + /* make sure change is effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0x0 + bne 1b + + setup_pll PLL3_BASE_ADDR, 216 + + setup_pll PLL4_BASE_ADDR, 455 + + /* Set the platform clock dividers */ + ldr r0, =ARM_BASE_ADDR + ldr r1, =0x00000124 + str r1, [r0, #0x14] + + ldr r0, =CCM_BASE_ADDR + mov r1, #0 + str r1, [r0, #CLKCTL_CACRR] + + /* Switch ARM back to PLL 1. */ + mov r1, #0x0 + str r1, [r0, #CLKCTL_CCSR] + + /* make uart div=6 */ ldr r1, [r0, #CLKCTL_CSCDR1] and r1, r1, #0xffffffc0 orr r1, r1, #0x0a str r1, [r0, #CLKCTL_CSCDR1] -#endif - /* make sure divider effective */ -1: ldr r1, [r0, #CLKCTL_CDHIPR] - cmp r1, #0x0 - bne 1b - str r4, [r0, #CLKCTL_CCDR] + /* Restore the default values in the Gate registers */ + ldr r1, =0xFFFFFFFF + str r1, [r0, #CLKCTL_CCGR0] + str r1, [r0, #CLKCTL_CCGR1] + str r1, [r0, #CLKCTL_CCGR2] + str r1, [r0, #CLKCTL_CCGR3] + str r1, [r0, #CLKCTL_CCGR4] + str r1, [r0, #CLKCTL_CCGR5] + str r1, [r0, #CLKCTL_CCGR6] + str r1, [r0, #CLKCTL_CCGR7] - /* for cko - for ARM div by 8 */ - mov r1, #0x000A0000 - add r1, r1, #0x00000F0 - str r1, [r0, #CLKCTL_CCOSR] + mov r1, #0x00000 + str r1, [r0, #CLKCTL_CCDR] + + /* for cko - for ARM div by 8 */ + mov r1, #0x000A0000 + add r1, r1, #0x00000F0 + str r1, [r0, #CLKCTL_CCOSR] + +#endif /* CONFIG_MX53 */ .endm .macro setup_wdog @@ -340,6 +406,8 @@ ENTRY(lowlevel_init) str r1, [r0, #0x4] #endif + init_arm_erratum + init_l2cc init_aips @@ -370,3 +438,9 @@ W_DP_665: .word DP_OP_665 W_DP_216: .word DP_OP_216 .word DP_MFD_216 .word DP_MFN_216 +W_DP_400: .word DP_OP_400 + .word DP_MFD_400 + .word DP_MFN_400 +W_DP_455: .word DP_OP_455 + .word DP_MFD_455 + .word DP_MFN_455 diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 9cee1d9..f3cd81a 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -50,7 +50,9 @@ DECLARE_GLOBAL_DATA_PTR; /* Declarations */ extern omap3_sysinfo sysinfo; static void omap3_setup_aux_cr(void); +#ifndef CONFIG_SYS_L2CACHE_OFF static void omap3_invalidate_l2_cache_secure(void); +#endif static const struct gpio_bank gpio_bank_34xx[6] = { { (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX }, @@ -410,19 +412,6 @@ static void omap3_update_aux_cr_secure(u32 set_bits, u32 clear_bits) } } -static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits) -{ - u32 acr; - - /* Read ACR */ - asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); - acr &= ~clear_bits; - acr |= set_bits; - - /* Write ACR - affects non-secure banked bits */ - asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr)); -} - static void omap3_setup_aux_cr(void) { /* Workaround for Cortex-A8 errata: #454179 #430973 @@ -436,6 +425,19 @@ static void omap3_setup_aux_cr(void) } #ifndef CONFIG_SYS_L2CACHE_OFF +static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits) +{ + u32 acr; + + /* Read ACR */ + asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); + acr &= ~clear_bits; + acr |= set_bits; + + /* Write ACR - affects non-secure banked bits */ + asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr)); +} + /* Invalidate the entire L2 cache from secure mode */ static void omap3_invalidate_l2_cache_secure(void) { diff --git a/arch/arm/cpu/armv7/socfpga/spl.c b/arch/arm/cpu/armv7/socfpga/spl.c index 944238b..84216eb 100644 --- a/arch/arm/cpu/armv7/socfpga/spl.c +++ b/arch/arm/cpu/armv7/socfpga/spl.c @@ -21,7 +21,6 @@ #include <asm/utils.h> #include <version.h> #include <image.h> -#include <malloc.h> #include <asm/arch/reset_manager.h> #include <spl.h> @@ -37,9 +36,6 @@ u32 spl_boot_device(void) */ void spl_board_init(void) { - /* init timer for enabling delay function */ - timer_init(); - /* de-assert reset for peripherals and bridges based on handoff */ reset_deassert_peripherals_handoff(); diff --git a/arch/arm/cpu/tegra20-common/emc.c b/arch/arm/cpu/tegra20-common/emc.c index 97420d7..90edf00 100644 --- a/arch/arm/cpu/tegra20-common/emc.c +++ b/arch/arm/cpu/tegra20-common/emc.c @@ -257,7 +257,7 @@ static int decode_emc(const void *blob, unsigned rate, struct emc_ctlr **emcp, int tegra_set_emc(const void *blob, unsigned rate) { struct emc_ctlr *emc; - const u32 *table; + const u32 *table = NULL; int err, i; err = decode_emc(blob, rate, &emc, &table); diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds index 1996b97..e6b202b 100644 --- a/arch/arm/cpu/u-boot.lds +++ b/arch/arm/cpu/u-boot.lds @@ -94,3 +94,7 @@ SECTIONS /DISCARD/ : { *(.interp*) } /DISCARD/ : { *(.gnu*) } } + +#if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE) +ASSERT(__bss_end__ < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big"); +#endif diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c index da093fb..08fad78 100644 --- a/arch/arm/imx-common/iomux-v3.c +++ b/arch/arm/imx-common/iomux-v3.c @@ -54,9 +54,10 @@ int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) return 0; } -int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count) +int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, + unsigned count) { - iomux_v3_cfg_t *p = pad_list; + iomux_v3_cfg_t const *p = pad_list; int i; int ret; diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h index e780296..53aafe3 100644 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h @@ -2,7 +2,7 @@ * Copyright (C) 2009, DENX Software Engineering * Author: John Rigby <jcrigby@gmail.com * - * Based on arch-mx31/mx31-regs.h + * Based on arch-mx31/imx-regs.h * Copyright (C) 2009 Ilya Yanok, * Emcraft Systems <yanok@emcraft.com> * and arch-mx27/imx-regs.h @@ -33,8 +33,7 @@ #ifndef _IMX_REGS_H #define _IMX_REGS_H -#ifndef __ASSEMBLY__ - +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) #include <asm/types.h> #ifdef CONFIG_FEC_MXC @@ -254,6 +253,7 @@ struct aips_regs { /* 128K Internal Static RAM */ #define IMX_RAM_BASE (0x78000000) +#define IMX_RAM_SIZE (128 * 1024) /* SDRAM BANKS */ #define IMX_SDRAM_BANK0_BASE (0x80000000) diff --git a/arch/arm/include/asm/arch-mx35/clock.h b/arch/arm/include/asm/arch-mx35/clock.h index 2eff08d..00679ef 100644 --- a/arch/arm/include/asm/arch-mx35/clock.h +++ b/arch/arm/include/asm/arch-mx35/clock.h @@ -44,7 +44,9 @@ enum mxc_clock { MXC_IPG_CLK, MXC_IPG_PERCLK, MXC_UART_CLK, - MXC_ESDHC_CLK, + MXC_ESDHC1_CLK, + MXC_ESDHC2_CLK, + MXC_ESDHC3_CLK, MXC_USB_CLK, MXC_CSPI_CLK, MXC_FEC_CLK, diff --git a/arch/arm/include/asm/arch-mx35/lowlevel_macro.S b/arch/arm/include/asm/arch-mx35/lowlevel_macro.S index 05aa951..bc6dbea 100644 --- a/arch/arm/include/asm/arch-mx35/lowlevel_macro.S +++ b/arch/arm/include/asm/arch-mx35/lowlevel_macro.S @@ -19,122 +19,121 @@ * MA 02111-1307 USA */ +#include <asm/arch/imx-regs.h> +#include <generated/asm-offsets.h> +#include <asm/macro.h> + /* * AIPS setup - Only setup MPROTx registers. * The PACR default values are good. + * + * Default argument values: + * - MPR: Set all MPROTx to be non-bufferable, trusted for R/W, not forced to + * user-mode. + * - OPACR: Clear the on and off peripheral modules Supervisor Protect bit for + * SDMA to access them. */ -.macro init_aips - /* - * Set all MPROTx to be non-bufferable, trusted for R/W, - * not forced to user-mode. - */ - ldr r0, =AIPS1_BASE_ADDR - ldr r1, =AIPS_MPR_CONFIG - str r1, [r0, #0x00] - str r1, [r0, #0x04] - ldr r0, =AIPS2_BASE_ADDR - str r1, [r0, #0x00] - str r1, [r0, #0x04] +.macro init_aips mpr=0x77777777, opacr=0x00000000 + ldr r0, =AIPS1_BASE_ADDR + ldr r1, =\mpr + str r1, [r0, #AIPS_MPR_0_7] + str r1, [r0, #AIPS_MPR_8_15] + ldr r2, =AIPS2_BASE_ADDR + str r1, [r2, #AIPS_MPR_0_7] + str r1, [r2, #AIPS_MPR_8_15] - /* - * Clear the on and off peripheral modules Supervisor Protect bit - * for SDMA to access them. Did not change the AIPS control registers - * (offset 0x20) access type - */ - ldr r0, =AIPS1_BASE_ADDR - ldr r1, =AIPS_OPACR_CONFIG - str r1, [r0, #0x40] - str r1, [r0, #0x44] - str r1, [r0, #0x48] - str r1, [r0, #0x4C] - str r1, [r0, #0x50] - ldr r0, =AIPS2_BASE_ADDR - str r1, [r0, #0x40] - str r1, [r0, #0x44] - str r1, [r0, #0x48] - str r1, [r0, #0x4C] - str r1, [r0, #0x50] + /* Did not change the AIPS control registers access type. */ + ldr r1, =\opacr + str r1, [r0, #AIPS_OPACR_0_7] + str r1, [r0, #AIPS_OPACR_8_15] + str r1, [r0, #AIPS_OPACR_16_23] + str r1, [r0, #AIPS_OPACR_24_31] + str r1, [r0, #AIPS_OPACR_32_39] + str r1, [r2, #AIPS_OPACR_0_7] + str r1, [r2, #AIPS_OPACR_8_15] + str r1, [r2, #AIPS_OPACR_16_23] + str r1, [r2, #AIPS_OPACR_24_31] + str r1, [r2, #AIPS_OPACR_32_39] .endm -/* MAX (Multi-Layer AHB Crossbar Switch) setup */ -.macro init_max - ldr r0, =MAX_BASE_ADDR - /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ - ldr r1, =MAX_MPR_CONFIG - str r1, [r0, #0x000] /* for S0 */ - str r1, [r0, #0x100] /* for S1 */ - str r1, [r0, #0x200] /* for S2 */ - str r1, [r0, #0x300] /* for S3 */ - str r1, [r0, #0x400] /* for S4 */ - /* SGPCR - always park on last master */ - ldr r1, =MAX_SGPCR_CONFIG - str r1, [r0, #0x010] /* for S0 */ - str r1, [r0, #0x110] /* for S1 */ - str r1, [r0, #0x210] /* for S2 */ - str r1, [r0, #0x310] /* for S3 */ - str r1, [r0, #0x410] /* for S4 */ - /* MGPCR - restore default values */ - ldr r1, =MAX_MGPCR_CONFIG - str r1, [r0, #0x800] /* for M0 */ - str r1, [r0, #0x900] /* for M1 */ - str r1, [r0, #0xA00] /* for M2 */ - str r1, [r0, #0xB00] /* for M3 */ - str r1, [r0, #0xC00] /* for M4 */ - str r1, [r0, #0xD00] /* for M5 */ +/* + * MAX (Multi-Layer AHB Crossbar Switch) setup + * + * Default argument values: + * - MPR: priority is M4 > M2 > M3 > M5 > M0 > M1 + * - SGPCR: always park on last master + * - MGPCR: restore default values + */ +.macro init_max mpr=0x00302154, sgpcr=0x00000010, mgpcr=0x00000000 + ldr r0, =MAX_BASE_ADDR + ldr r1, =\mpr + str r1, [r0, #MAX_MPR0] /* for S0 */ + str r1, [r0, #MAX_MPR1] /* for S1 */ + str r1, [r0, #MAX_MPR2] /* for S2 */ + str r1, [r0, #MAX_MPR3] /* for S3 */ + str r1, [r0, #MAX_MPR4] /* for S4 */ + ldr r1, =\sgpcr + str r1, [r0, #MAX_SGPCR0] /* for S0 */ + str r1, [r0, #MAX_SGPCR1] /* for S1 */ + str r1, [r0, #MAX_SGPCR2] /* for S2 */ + str r1, [r0, #MAX_SGPCR3] /* for S3 */ + str r1, [r0, #MAX_SGPCR4] /* for S4 */ + ldr r1, =\mgpcr + str r1, [r0, #MAX_MGPCR0] /* for M0 */ + str r1, [r0, #MAX_MGPCR1] /* for M1 */ + str r1, [r0, #MAX_MGPCR2] /* for M2 */ + str r1, [r0, #MAX_MGPCR3] /* for M3 */ + str r1, [r0, #MAX_MGPCR4] /* for M4 */ + str r1, [r0, #MAX_MGPCR5] /* for M5 */ .endm -/* M3IF setup */ -.macro init_m3if - /* Configure M3IF registers */ - ldr r1, =M3IF_BASE_ADDR - /* - * M3IF Control Register (M3IFCTL) - * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 - * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 - * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 - * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 - * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 - * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 - * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 - * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 - * ------------ - * 0x00000040 - */ - ldr r0, =M3IF_CONFIG - str r0, [r1] /* M3IF control reg */ +/* + * M3IF setup + * + * Default argument values: + * - CTL: + * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 + * MRRP[1] = L2CC1 not on priority list (0 << 1) = 0x00000000 + * MRRP[2] = MBX not on priority list (0 << 2) = 0x00000000 + * MRRP[3] = MAX1 not on priority list (0 << 3) = 0x00000000 + * MRRP[4] = SDMA not on priority list (0 << 4) = 0x00000000 + * MRRP[5] = MPEG4 not on priority list (0 << 5) = 0x00000000 + * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 + * MRRP[7] = IPU2 not on priority list (0 << 7) = 0x00000000 + * ------------ + * 0x00000040 + */ +.macro init_m3if ctl=0x00000040 + /* M3IF Control Register (M3IFCTL) */ + write32 M3IF_BASE_ADDR, \ctl .endm .macro core_init - mrc 15, 0, r1, c1, c0, 0 + mrc p15, 0, r1, c1, c0, 0 - mrc 15, 0, r0, c1, c0, 1 - orr r0, r0, #7 - mcr 15, 0, r0, c1, c0, 1 - orr r1, r1, #(1<<11) + /* Set branch prediction enable */ + mrc p15, 0, r0, c1, c0, 1 + orr r0, r0, #7 + mcr p15, 0, r0, c1, c0, 1 + orr r1, r1, #1 << 11 /* Set unaligned access enable */ - orr r1, r1, #(1<<22) + orr r1, r1, #1 << 22 /* Set low int latency enable */ - orr r1, r1, #(1<<21) + orr r1, r1, #1 << 21 - mcr 15, 0, r1, c1, c0, 0 + mcr p15, 0, r1, c1, c0, 0 - mov r0, #0 + mov r0, #0 - /* Set branch prediction enable */ - mcr 15, 0, r0, c15, c2, 4 + mcr p15, 0, r0, c15, c2, 4 - mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */ - mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */ - mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */ + mcr p15, 0, r0, c7, c7, 0 /* Invalidate I cache and D cache */ + mcr p15, 0, r0, c8, c7, 0 /* Invalidate TLBs */ + mcr p15, 0, r0, c7, c10, 4 /* Drain the write buffer */ - /* - * initializes very early AIPS - * Then it also initializes Multi-Layer AHB Crossbar Switch, - * M3IF - * Also setup the Peripheral Port Remap register inside the core - */ - ldr r0, =0x40000015 /* start from AIPS 2GB region */ - mcr p15, 0, r0, c15, c2, 4 + /* Setup the Peripheral Port Memory Remap Register */ + ldr r0, =0x40000015 /* Start from AIPS 2-GB region */ + mcr p15, 0, r0, c15, c2, 4 .endm diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index 46017f4..1d060fd 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -308,6 +308,10 @@ #define DP_MFD_400 (3 - 1) #define DP_MFN_400 1 +#define DP_OP_455 ((9 << 4) + ((2 - 1) << 0)) +#define DP_MFD_455 (48 - 1) +#define DP_MFN_455 23 + #define DP_OP_216 ((6 << 4) + ((3 - 1) << 0)) #define DP_MFD_216 (4 - 1) #define DP_MFN_216 3 diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index dc737ba..09ab010 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -200,6 +200,12 @@ struct src { u32 gpr10; }; +/* OCOTP Registers */ +struct ocotp_regs { + u32 reserved[0x198]; + u32 gp1; /* 0x660 */ +}; + /* GPR3 bitfields */ #define IOMUXC_GPR3_GPU_DBG_OFFSET 29 #define IOMUXC_GPR3_GPU_DBG_MASK (3<<IOMUXC_GPR3_GPU_DBG_OFFSET) diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h b/arch/arm/include/asm/arch-mx6/mx6x_pins.h index 3d66d64..3ade8dc 100644 --- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h @@ -530,20 +530,20 @@ enum { MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 = IOMUX_PAD(0x046C, 0x0158, 1, 0x0000, 0, 0), MX6Q_PAD_EIM_BCLK__GPIO_6_31 = IOMUX_PAD(0x046C, 0x0158, 5, 0x0000, 0, 0), MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31 = IOMUX_PAD(0x046C, 0x0158, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, 0), + MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0), MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0), MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 = IOMUX_PAD(0x0470, 0x015C, 4, 0x0000, 0, 0), MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16 = IOMUX_PAD(0x0470, 0x015C, 5, 0x0000, 0, 0), MX6Q_PAD_DI0_DISP_CLK__MMDC_DEBUG_0 = IOMUX_PAD(0x0470, 0x015C, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, 0), + MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 1, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN15__AUDMUX_AUD6_TXC = IOMUX_PAD(0x0474, 0x0160, 2, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29 = IOMUX_PAD(0x0474, 0x0160, 3, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1 = IOMUX_PAD(0x0474, 0x0160, 4, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN15__GPIO_4_17 = IOMUX_PAD(0x0474, 0x0160, 5, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1 = IOMUX_PAD(0x0474, 0x0160, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, 0), + MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 1, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x0478, 0x0164, 2, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30 = IOMUX_PAD(0x0478, 0x0164, 3, 0x0000, 0, 0), @@ -551,7 +551,7 @@ enum { MX6Q_PAD_DI0_PIN2__GPIO_4_18 = IOMUX_PAD(0x0478, 0x0164, 5, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN2__MMDC_DEBUG_2 = IOMUX_PAD(0x0478, 0x0164, 6, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN2__PL301_PER1_HADDR_9 = IOMUX_PAD(0x0478, 0x0164, 7, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 0, 0x0000, 0, 0), + MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 1, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x047C, 0x0168, 2, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31 = IOMUX_PAD(0x047C, 0x0168, 3, 0x0000, 0, 0), @@ -564,17 +564,17 @@ enum { MX6Q_PAD_DI0_PIN4__AUDMUX_AUD6_RXD = IOMUX_PAD(0x0480, 0x016C, 2, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN4__USDHC1_WP = IOMUX_PAD(0x0480, 0x016C, 3, 0x094C, 0, 0), MX6Q_PAD_DI0_PIN4__SDMA_DEBUG_YIELD = IOMUX_PAD(0x0480, 0x016C, 4, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x0480, 0x016C, 5, 0x0000, 0, 0), + MX6Q_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x0480, 0x016C, 5, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4 = IOMUX_PAD(0x0480, 0x016C, 6, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN4__PL301_PER1_HADDR_11 = IOMUX_PAD(0x0480, 0x016C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK = IOMUX_PAD(0x0484, 0x0170, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0 = IOMUX_PAD(0x0484, 0x0170, 3, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN = IOMUX_PAD(0x0484, 0x0170, 4, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT0__GPIO_4_21 = IOMUX_PAD(0x0484, 0x0170, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5 = IOMUX_PAD(0x0484, 0x0170, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI = IOMUX_PAD(0x0488, 0x0174, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1 = IOMUX_PAD(0x0488, 0x0174, 3, 0x0000, 0, 0), @@ -582,7 +582,7 @@ enum { MX6Q_PAD_DISP0_DAT1__GPIO_4_22 = IOMUX_PAD(0x0488, 0x0174, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT1__MMDC_DEBUG_6 = IOMUX_PAD(0x0488, 0x0174, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT1__PL301_PER1_HADR_12 = IOMUX_PAD(0x0488, 0x0174, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO = IOMUX_PAD(0x048C, 0x0178, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2 = IOMUX_PAD(0x048C, 0x0178, 3, 0x0000, 0, 0), @@ -590,7 +590,7 @@ enum { MX6Q_PAD_DISP0_DAT2__GPIO_4_23 = IOMUX_PAD(0x048C, 0x0178, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT2__MMDC_DEBUG_7 = IOMUX_PAD(0x048C, 0x0178, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT2__PL301_PER1_HADR_13 = IOMUX_PAD(0x048C, 0x0178, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0 = IOMUX_PAD(0x0490, 0x017C, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3 = IOMUX_PAD(0x0490, 0x017C, 3, 0x0000, 0, 0), @@ -598,7 +598,7 @@ enum { MX6Q_PAD_DISP0_DAT3__GPIO_4_24 = IOMUX_PAD(0x0490, 0x017C, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8 = IOMUX_PAD(0x0490, 0x017C, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT3__PL301_PER1_HADR_14 = IOMUX_PAD(0x0490, 0x017C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1 = IOMUX_PAD(0x0494, 0x0180, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4 = IOMUX_PAD(0x0494, 0x0180, 3, 0x0000, 0, 0), @@ -606,7 +606,7 @@ enum { MX6Q_PAD_DISP0_DAT4__GPIO_4_25 = IOMUX_PAD(0x0494, 0x0180, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9 = IOMUX_PAD(0x0494, 0x0180, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT4__PL301_PER1_HADR_15 = IOMUX_PAD(0x0494, 0x0180, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2 = IOMUX_PAD(0x0498, 0x0184, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x0498, 0x0184, 3, 0x0000, 0, 0), @@ -614,7 +614,7 @@ enum { MX6Q_PAD_DISP0_DAT5__GPIO_4_26 = IOMUX_PAD(0x0498, 0x0184, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT5__MMDC_DEBUG_10 = IOMUX_PAD(0x0498, 0x0184, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT5__PL301_PER1_HADR_16 = IOMUX_PAD(0x0498, 0x0184, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3 = IOMUX_PAD(0x049C, 0x0188, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC = IOMUX_PAD(0x049C, 0x0188, 3, 0x0000, 0, 0), @@ -622,7 +622,7 @@ enum { MX6Q_PAD_DISP0_DAT6__GPIO_4_27 = IOMUX_PAD(0x049C, 0x0188, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT6__MMDC_DEBUG_11 = IOMUX_PAD(0x049C, 0x0188, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT6__PL301_PER1_HADR_17 = IOMUX_PAD(0x049C, 0x0188, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY = IOMUX_PAD(0x04A0, 0x018C, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5 = IOMUX_PAD(0x04A0, 0x018C, 3, 0x0000, 0, 0), @@ -630,7 +630,7 @@ enum { MX6Q_PAD_DISP0_DAT7__GPIO_4_28 = IOMUX_PAD(0x04A0, 0x018C, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT7__MMDC_DEBUG_12 = IOMUX_PAD(0x04A0, 0x018C, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT7__PL301_PER1_HADR_18 = IOMUX_PAD(0x04A0, 0x018C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT8__PWM1_PWMO = IOMUX_PAD(0x04A4, 0x0190, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT8__WDOG1_WDOG_B = IOMUX_PAD(0x04A4, 0x0190, 3, 0x0000, 0, 0), @@ -638,7 +638,7 @@ enum { MX6Q_PAD_DISP0_DAT8__GPIO_4_29 = IOMUX_PAD(0x04A4, 0x0190, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT8__MMDC_DEBUG_13 = IOMUX_PAD(0x04A4, 0x0190, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT8__PL301_PER1_HADR_19 = IOMUX_PAD(0x04A4, 0x0190, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT9__PWM2_PWMO = IOMUX_PAD(0x04A8, 0x0194, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT9__WDOG2_WDOG_B = IOMUX_PAD(0x04A8, 0x0194, 3, 0x0000, 0, 0), @@ -646,41 +646,41 @@ enum { MX6Q_PAD_DISP0_DAT9__GPIO_4_30 = IOMUX_PAD(0x04A8, 0x0194, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT9__MMDC_DEBUG_14 = IOMUX_PAD(0x04A8, 0x0194, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT9__PL301_PER1_HADR_20 = IOMUX_PAD(0x04A8, 0x0194, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT10__USDHC1_DBG_6 = IOMUX_PAD(0x04AC, 0x0198, 3, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3 = IOMUX_PAD(0x04AC, 0x0198, 4, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT10__GPIO_4_31 = IOMUX_PAD(0x04AC, 0x0198, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT10__MMDC_DEBUG_15 = IOMUX_PAD(0x04AC, 0x0198, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT10__PL301_PER1_HADR21 = IOMUX_PAD(0x04AC, 0x0198, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7 = IOMUX_PAD(0x04B0, 0x019C, 3, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4 = IOMUX_PAD(0x04B0, 0x019C, 4, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT11__GPIO_5_5 = IOMUX_PAD(0x04B0, 0x019C, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT11__MMDC_DEBUG_16 = IOMUX_PAD(0x04B0, 0x019C, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT11__PL301_PER1_HADR22 = IOMUX_PAD(0x04B0, 0x019C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT12__RESERVED_RESERVED = IOMUX_PAD(0x04B4, 0x01A0, 3, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5 = IOMUX_PAD(0x04B4, 0x01A0, 4, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT12__GPIO_5_6 = IOMUX_PAD(0x04B4, 0x01A0, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT12__MMDC_DEBUG_17 = IOMUX_PAD(0x04B4, 0x01A0, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT12__PL301_PER1_HADR23 = IOMUX_PAD(0x04B4, 0x01A0, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x04B8, 0x01A4, 3, 0x07D8, 1, 0), MX6Q_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0 = IOMUX_PAD(0x04B8, 0x01A4, 4, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT13__GPIO_5_7 = IOMUX_PAD(0x04B8, 0x01A4, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT13__MMDC_DEBUG_18 = IOMUX_PAD(0x04B8, 0x01A4, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT13__PL301_PER1_HADR24 = IOMUX_PAD(0x04B8, 0x01A4, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC = IOMUX_PAD(0x04BC, 0x01A8, 3, 0x07D4, 1, 0), MX6Q_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1 = IOMUX_PAD(0x04BC, 0x01A8, 4, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT14__GPIO_5_8 = IOMUX_PAD(0x04BC, 0x01A8, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT14__MMDC_DEBUG_19 = IOMUX_PAD(0x04BC, 0x01A8, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 2, 0x0804, 1, 0), MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 3, 0x0820, 1, 0), @@ -688,7 +688,7 @@ enum { MX6Q_PAD_DISP0_DAT15__GPIO_5_9 = IOMUX_PAD(0x04C0, 0x01AC, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT15__MMDC_DEBUG_20 = IOMUX_PAD(0x04C0, 0x01AC, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT15__PL301_PER1_HADR25 = IOMUX_PAD(0x04C0, 0x01AC, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI = IOMUX_PAD(0x04C4, 0x01B0, 2, 0x0818, 1, 0), MX6Q_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC = IOMUX_PAD(0x04C4, 0x01B0, 3, 0x07DC, 0, 0), @@ -696,7 +696,7 @@ enum { MX6Q_PAD_DISP0_DAT16__GPIO_5_10 = IOMUX_PAD(0x04C4, 0x01B0, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT16__MMDC_DEBUG_21 = IOMUX_PAD(0x04C4, 0x01B0, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT16__PL301_PER1_HADR26 = IOMUX_PAD(0x04C4, 0x01B0, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO = IOMUX_PAD(0x04C8, 0x01B4, 2, 0x0814, 1, 0), MX6Q_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD = IOMUX_PAD(0x04C8, 0x01B4, 3, 0x07D0, 0, 0), @@ -704,7 +704,7 @@ enum { MX6Q_PAD_DISP0_DAT17__GPIO_5_11 = IOMUX_PAD(0x04C8, 0x01B4, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT17__MMDC_DEBUG_22 = IOMUX_PAD(0x04C8, 0x01B4, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT17__PL301_PER1_HADR27 = IOMUX_PAD(0x04C8, 0x01B4, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0 = IOMUX_PAD(0x04CC, 0x01B8, 2, 0x081C, 1, 0), MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x04CC, 0x01B8, 3, 0x07E0, 0, 0), @@ -712,7 +712,7 @@ enum { MX6Q_PAD_DISP0_DAT18__GPIO_5_12 = IOMUX_PAD(0x04CC, 0x01B8, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT18__MMDC_DEBUG_23 = IOMUX_PAD(0x04CC, 0x01B8, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT18__WEIM_WEIM_CS_2 = IOMUX_PAD(0x04CC, 0x01B8, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK = IOMUX_PAD(0x04D0, 0x01BC, 2, 0x0810, 1, 0), MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD = IOMUX_PAD(0x04D0, 0x01BC, 3, 0x07CC, 0, 0), @@ -720,7 +720,7 @@ enum { MX6Q_PAD_DISP0_DAT19__GPIO_5_13 = IOMUX_PAD(0x04D0, 0x01BC, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT19__MMDC_DEBUG_24 = IOMUX_PAD(0x04D0, 0x01BC, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT19__WEIM_WEIM_CS_3 = IOMUX_PAD(0x04D0, 0x01BC, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK = IOMUX_PAD(0x04D4, 0x01C0, 2, 0x07F4, 1, 0), MX6Q_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC = IOMUX_PAD(0x04D4, 0x01C0, 3, 0x07C4, 0, 0), @@ -728,7 +728,7 @@ enum { MX6Q_PAD_DISP0_DAT20__GPIO_5_14 = IOMUX_PAD(0x04D4, 0x01C0, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT20__MMDC_DEBUG_25 = IOMUX_PAD(0x04D4, 0x01C0, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT20__PL301_PER1_HADR28 = IOMUX_PAD(0x04D4, 0x01C0, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI = IOMUX_PAD(0x04D8, 0x01C4, 2, 0x07FC, 1, 0), MX6Q_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD = IOMUX_PAD(0x04D8, 0x01C4, 3, 0x07B8, 1, 0), @@ -736,7 +736,7 @@ enum { MX6Q_PAD_DISP0_DAT21__GPIO_5_15 = IOMUX_PAD(0x04D8, 0x01C4, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT21__MMDC_DEBUG_26 = IOMUX_PAD(0x04D8, 0x01C4, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT21__PL301_PER1_HADR29 = IOMUX_PAD(0x04D8, 0x01C4, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO = IOMUX_PAD(0x04DC, 0x01C8, 2, 0x07F8, 1, 0), MX6Q_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x04DC, 0x01C8, 3, 0x07C8, 1, 0), @@ -744,7 +744,7 @@ enum { MX6Q_PAD_DISP0_DAT22__GPIO_5_16 = IOMUX_PAD(0x04DC, 0x01C8, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT22__MMDC_DEBUG_27 = IOMUX_PAD(0x04DC, 0x01C8, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT22__PL301_PER1_HADR30 = IOMUX_PAD(0x04DC, 0x01C8, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0 = IOMUX_PAD(0x04E0, 0x01CC, 2, 0x0800, 1, 0), MX6Q_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD = IOMUX_PAD(0x04E0, 0x01CC, 3, 0x07B4, 1, 0), diff --git a/arch/arm/include/asm/arch-mx6/mxc_hdmi.h b/arch/arm/include/asm/arch-mx6/mxc_hdmi.h new file mode 100644 index 0000000..02a413f --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mxc_hdmi.h @@ -0,0 +1,1053 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MXC_HDMI_H__ +#define __MXC_HDMI_H__ + +/* + * Hdmi controller registers + */ + +/* Identification Registers */ +#define HDMI_DESIGN_ID 0x0000 +#define HDMI_REVISION_ID 0x0001 +#define HDMI_PRODUCT_ID0 0x0002 +#define HDMI_PRODUCT_ID1 0x0003 +#define HDMI_CONFIG0_ID 0x0004 +#define HDMI_CONFIG1_ID 0x0005 +#define HDMI_CONFIG2_ID 0x0006 +#define HDMI_CONFIG3_ID 0x0007 + +/* Interrupt Registers */ +#define HDMI_IH_FC_STAT0 0x0100 +#define HDMI_IH_FC_STAT1 0x0101 +#define HDMI_IH_FC_STAT2 0x0102 +#define HDMI_IH_AS_STAT0 0x0103 +#define HDMI_IH_PHY_STAT0 0x0104 +#define HDMI_IH_I2CM_STAT0 0x0105 +#define HDMI_IH_CEC_STAT0 0x0106 +#define HDMI_IH_VP_STAT0 0x0107 +#define HDMI_IH_I2CMPHY_STAT0 0x0108 +#define HDMI_IH_AHBDMAAUD_STAT0 0x0109 + +#define HDMI_IH_MUTE_FC_STAT0 0x0180 +#define HDMI_IH_MUTE_FC_STAT1 0x0181 +#define HDMI_IH_MUTE_FC_STAT2 0x0182 +#define HDMI_IH_MUTE_AS_STAT0 0x0183 +#define HDMI_IH_MUTE_PHY_STAT0 0x0184 +#define HDMI_IH_MUTE_I2CM_STAT0 0x0185 +#define HDMI_IH_MUTE_CEC_STAT0 0x0186 +#define HDMI_IH_MUTE_VP_STAT0 0x0187 +#define HDMI_IH_MUTE_I2CMPHY_STAT0 0x0188 +#define HDMI_IH_MUTE_AHBDMAAUD_STAT0 0x0189 +#define HDMI_IH_MUTE 0x01FF + +/* Video Sample Registers */ +#define HDMI_TX_INVID0 0x0200 +#define HDMI_TX_INSTUFFING 0x0201 +#define HDMI_TX_GYDATA0 0x0202 +#define HDMI_TX_GYDATA1 0x0203 +#define HDMI_TX_RCRDATA0 0x0204 +#define HDMI_TX_RCRDATA1 0x0205 +#define HDMI_TX_BCBDATA0 0x0206 +#define HDMI_TX_BCBDATA1 0x0207 + +/* Video Packetizer Registers */ +#define HDMI_VP_STATUS 0x0800 +#define HDMI_VP_PR_CD 0x0801 +#define HDMI_VP_STUFF 0x0802 +#define HDMI_VP_REMAP 0x0803 +#define HDMI_VP_CONF 0x0804 +#define HDMI_VP_STAT 0x0805 +#define HDMI_VP_INT 0x0806 +#define HDMI_VP_MASK 0x0807 +#define HDMI_VP_POL 0x0808 + +/* Frame Composer Registers */ +#define HDMI_FC_INVIDCONF 0x1000 +#define HDMI_FC_INHACTV0 0x1001 +#define HDMI_FC_INHACTV1 0x1002 +#define HDMI_FC_INHBLANK0 0x1003 +#define HDMI_FC_INHBLANK1 0x1004 +#define HDMI_FC_INVACTV0 0x1005 +#define HDMI_FC_INVACTV1 0x1006 +#define HDMI_FC_INVBLANK 0x1007 +#define HDMI_FC_HSYNCINDELAY0 0x1008 +#define HDMI_FC_HSYNCINDELAY1 0x1009 +#define HDMI_FC_HSYNCINWIDTH0 0x100A +#define HDMI_FC_HSYNCINWIDTH1 0x100B +#define HDMI_FC_VSYNCINDELAY 0x100C +#define HDMI_FC_VSYNCINWIDTH 0x100D +#define HDMI_FC_INFREQ0 0x100E +#define HDMI_FC_INFREQ1 0x100F +#define HDMI_FC_INFREQ2 0x1010 +#define HDMI_FC_CTRLDUR 0x1011 +#define HDMI_FC_EXCTRLDUR 0x1012 +#define HDMI_FC_EXCTRLSPAC 0x1013 +#define HDMI_FC_CH0PREAM 0x1014 +#define HDMI_FC_CH1PREAM 0x1015 +#define HDMI_FC_CH2PREAM 0x1016 +#define HDMI_FC_AVICONF3 0x1017 +#define HDMI_FC_GCP 0x1018 +#define HDMI_FC_AVICONF0 0x1019 +#define HDMI_FC_AVICONF1 0x101A +#define HDMI_FC_AVICONF2 0x101B +#define HDMI_FC_AVIVID 0x101C +#define HDMI_FC_AVIETB0 0x101D +#define HDMI_FC_AVIETB1 0x101E +#define HDMI_FC_AVISBB0 0x101F +#define HDMI_FC_AVISBB1 0x1020 +#define HDMI_FC_AVIELB0 0x1021 +#define HDMI_FC_AVIELB1 0x1022 +#define HDMI_FC_AVISRB0 0x1023 +#define HDMI_FC_AVISRB1 0x1024 +#define HDMI_FC_AUDICONF0 0x1025 +#define HDMI_FC_AUDICONF1 0x1026 +#define HDMI_FC_AUDICONF2 0x1027 +#define HDMI_FC_AUDICONF3 0x1028 +#define HDMI_FC_VSDIEEEID0 0x1029 +#define HDMI_FC_VSDSIZE 0x102A +#define HDMI_FC_VSDIEEEID1 0x1030 +#define HDMI_FC_VSDIEEEID2 0x1031 +#define HDMI_FC_VSDPAYLOAD0 0x1032 +#define HDMI_FC_VSDPAYLOAD1 0x1033 +#define HDMI_FC_VSDPAYLOAD2 0x1034 +#define HDMI_FC_VSDPAYLOAD3 0x1035 +#define HDMI_FC_VSDPAYLOAD4 0x1036 +#define HDMI_FC_VSDPAYLOAD5 0x1037 +#define HDMI_FC_VSDPAYLOAD6 0x1038 +#define HDMI_FC_VSDPAYLOAD7 0x1039 +#define HDMI_FC_VSDPAYLOAD8 0x103A +#define HDMI_FC_VSDPAYLOAD9 0x103B +#define HDMI_FC_VSDPAYLOAD10 0x103C +#define HDMI_FC_VSDPAYLOAD11 0x103D +#define HDMI_FC_VSDPAYLOAD12 0x103E +#define HDMI_FC_VSDPAYLOAD13 0x103F +#define HDMI_FC_VSDPAYLOAD14 0x1040 +#define HDMI_FC_VSDPAYLOAD15 0x1041 +#define HDMI_FC_VSDPAYLOAD16 0x1042 +#define HDMI_FC_VSDPAYLOAD17 0x1043 +#define HDMI_FC_VSDPAYLOAD18 0x1044 +#define HDMI_FC_VSDPAYLOAD19 0x1045 +#define HDMI_FC_VSDPAYLOAD20 0x1046 +#define HDMI_FC_VSDPAYLOAD21 0x1047 +#define HDMI_FC_VSDPAYLOAD22 0x1048 +#define HDMI_FC_VSDPAYLOAD23 0x1049 +#define HDMI_FC_SPDVENDORNAME0 0x104A +#define HDMI_FC_SPDVENDORNAME1 0x104B +#define HDMI_FC_SPDVENDORNAME2 0x104C +#define HDMI_FC_SPDVENDORNAME3 0x104D +#define HDMI_FC_SPDVENDORNAME4 0x104E +#define HDMI_FC_SPDVENDORNAME5 0x104F +#define HDMI_FC_SPDVENDORNAME6 0x1050 +#define HDMI_FC_SPDVENDORNAME7 0x1051 +#define HDMI_FC_SDPPRODUCTNAME0 0x1052 +#define HDMI_FC_SDPPRODUCTNAME1 0x1053 +#define HDMI_FC_SDPPRODUCTNAME2 0x1054 +#define HDMI_FC_SDPPRODUCTNAME3 0x1055 +#define HDMI_FC_SDPPRODUCTNAME4 0x1056 +#define HDMI_FC_SDPPRODUCTNAME5 0x1057 +#define HDMI_FC_SDPPRODUCTNAME6 0x1058 +#define HDMI_FC_SDPPRODUCTNAME7 0x1059 +#define HDMI_FC_SDPPRODUCTNAME8 0x105A +#define HDMI_FC_SDPPRODUCTNAME9 0x105B +#define HDMI_FC_SDPPRODUCTNAME10 0x105C +#define HDMI_FC_SDPPRODUCTNAME11 0x105D +#define HDMI_FC_SDPPRODUCTNAME12 0x105E +#define HDMI_FC_SDPPRODUCTNAME13 0x105F +#define HDMI_FC_SDPPRODUCTNAME14 0x1060 +#define HDMI_FC_SPDPRODUCTNAME15 0x1061 +#define HDMI_FC_SPDDEVICEINF 0x1062 +#define HDMI_FC_AUDSCONF 0x1063 +#define HDMI_FC_AUDSSTAT 0x1064 +#define HDMI_FC_DATACH0FILL 0x1070 +#define HDMI_FC_DATACH1FILL 0x1071 +#define HDMI_FC_DATACH2FILL 0x1072 +#define HDMI_FC_CTRLQHIGH 0x1073 +#define HDMI_FC_CTRLQLOW 0x1074 +#define HDMI_FC_ACP0 0x1075 +#define HDMI_FC_ACP28 0x1076 +#define HDMI_FC_ACP27 0x1077 +#define HDMI_FC_ACP26 0x1078 +#define HDMI_FC_ACP25 0x1079 +#define HDMI_FC_ACP24 0x107A +#define HDMI_FC_ACP23 0x107B +#define HDMI_FC_ACP22 0x107C +#define HDMI_FC_ACP21 0x107D +#define HDMI_FC_ACP20 0x107E +#define HDMI_FC_ACP19 0x107F +#define HDMI_FC_ACP18 0x1080 +#define HDMI_FC_ACP17 0x1081 +#define HDMI_FC_ACP16 0x1082 +#define HDMI_FC_ACP15 0x1083 +#define HDMI_FC_ACP14 0x1084 +#define HDMI_FC_ACP13 0x1085 +#define HDMI_FC_ACP12 0x1086 +#define HDMI_FC_ACP11 0x1087 +#define HDMI_FC_ACP10 0x1088 +#define HDMI_FC_ACP9 0x1089 +#define HDMI_FC_ACP8 0x108A +#define HDMI_FC_ACP7 0x108B +#define HDMI_FC_ACP6 0x108C +#define HDMI_FC_ACP5 0x108D +#define HDMI_FC_ACP4 0x108E +#define HDMI_FC_ACP3 0x108F +#define HDMI_FC_ACP2 0x1090 +#define HDMI_FC_ACP1 0x1091 +#define HDMI_FC_ISCR1_0 0x1092 +#define HDMI_FC_ISCR1_16 0x1093 +#define HDMI_FC_ISCR1_15 0x1094 +#define HDMI_FC_ISCR1_14 0x1095 +#define HDMI_FC_ISCR1_13 0x1096 +#define HDMI_FC_ISCR1_12 0x1097 +#define HDMI_FC_ISCR1_11 0x1098 +#define HDMI_FC_ISCR1_10 0x1099 +#define HDMI_FC_ISCR1_9 0x109A +#define HDMI_FC_ISCR1_8 0x109B +#define HDMI_FC_ISCR1_7 0x109C +#define HDMI_FC_ISCR1_6 0x109D +#define HDMI_FC_ISCR1_5 0x109E +#define HDMI_FC_ISCR1_4 0x109F +#define HDMI_FC_ISCR1_3 0x10A0 +#define HDMI_FC_ISCR1_2 0x10A1 +#define HDMI_FC_ISCR1_1 0x10A2 +#define HDMI_FC_ISCR2_15 0x10A3 +#define HDMI_FC_ISCR2_14 0x10A4 +#define HDMI_FC_ISCR2_13 0x10A5 +#define HDMI_FC_ISCR2_12 0x10A6 +#define HDMI_FC_ISCR2_11 0x10A7 +#define HDMI_FC_ISCR2_10 0x10A8 +#define HDMI_FC_ISCR2_9 0x10A9 +#define HDMI_FC_ISCR2_8 0x10AA +#define HDMI_FC_ISCR2_7 0x10AB +#define HDMI_FC_ISCR2_6 0x10AC +#define HDMI_FC_ISCR2_5 0x10AD +#define HDMI_FC_ISCR2_4 0x10AE +#define HDMI_FC_ISCR2_3 0x10AF +#define HDMI_FC_ISCR2_2 0x10B0 +#define HDMI_FC_ISCR2_1 0x10B1 +#define HDMI_FC_ISCR2_0 0x10B2 +#define HDMI_FC_DATAUTO0 0x10B3 +#define HDMI_FC_DATAUTO1 0x10B4 +#define HDMI_FC_DATAUTO2 0x10B5 +#define HDMI_FC_DATMAN 0x10B6 +#define HDMI_FC_DATAUTO3 0x10B7 +#define HDMI_FC_RDRB0 0x10B8 +#define HDMI_FC_RDRB1 0x10B9 +#define HDMI_FC_RDRB2 0x10BA +#define HDMI_FC_RDRB3 0x10BB +#define HDMI_FC_RDRB4 0x10BC +#define HDMI_FC_RDRB5 0x10BD +#define HDMI_FC_RDRB6 0x10BE +#define HDMI_FC_RDRB7 0x10BF +#define HDMI_FC_STAT0 0x10D0 +#define HDMI_FC_INT0 0x10D1 +#define HDMI_FC_MASK0 0x10D2 +#define HDMI_FC_POL0 0x10D3 +#define HDMI_FC_STAT1 0x10D4 +#define HDMI_FC_INT1 0x10D5 +#define HDMI_FC_MASK1 0x10D6 +#define HDMI_FC_POL1 0x10D7 +#define HDMI_FC_STAT2 0x10D8 +#define HDMI_FC_INT2 0x10D9 +#define HDMI_FC_MASK2 0x10DA +#define HDMI_FC_POL2 0x10DB +#define HDMI_FC_PRCONF 0x10E0 + +#define HDMI_FC_GMD_STAT 0x1100 +#define HDMI_FC_GMD_EN 0x1101 +#define HDMI_FC_GMD_UP 0x1102 +#define HDMI_FC_GMD_CONF 0x1103 +#define HDMI_FC_GMD_HB 0x1104 +#define HDMI_FC_GMD_PB0 0x1105 +#define HDMI_FC_GMD_PB1 0x1106 +#define HDMI_FC_GMD_PB2 0x1107 +#define HDMI_FC_GMD_PB3 0x1108 +#define HDMI_FC_GMD_PB4 0x1109 +#define HDMI_FC_GMD_PB5 0x110A +#define HDMI_FC_GMD_PB6 0x110B +#define HDMI_FC_GMD_PB7 0x110C +#define HDMI_FC_GMD_PB8 0x110D +#define HDMI_FC_GMD_PB9 0x110E +#define HDMI_FC_GMD_PB10 0x110F +#define HDMI_FC_GMD_PB11 0x1110 +#define HDMI_FC_GMD_PB12 0x1111 +#define HDMI_FC_GMD_PB13 0x1112 +#define HDMI_FC_GMD_PB14 0x1113 +#define HDMI_FC_GMD_PB15 0x1114 +#define HDMI_FC_GMD_PB16 0x1115 +#define HDMI_FC_GMD_PB17 0x1116 +#define HDMI_FC_GMD_PB18 0x1117 +#define HDMI_FC_GMD_PB19 0x1118 +#define HDMI_FC_GMD_PB20 0x1119 +#define HDMI_FC_GMD_PB21 0x111A +#define HDMI_FC_GMD_PB22 0x111B +#define HDMI_FC_GMD_PB23 0x111C +#define HDMI_FC_GMD_PB24 0x111D +#define HDMI_FC_GMD_PB25 0x111E +#define HDMI_FC_GMD_PB26 0x111F +#define HDMI_FC_GMD_PB27 0x1120 + +#define HDMI_FC_DBGFORCE 0x1200 +#define HDMI_FC_DBGAUD0CH0 0x1201 +#define HDMI_FC_DBGAUD1CH0 0x1202 +#define HDMI_FC_DBGAUD2CH0 0x1203 +#define HDMI_FC_DBGAUD0CH1 0x1204 +#define HDMI_FC_DBGAUD1CH1 0x1205 +#define HDMI_FC_DBGAUD2CH1 0x1206 +#define HDMI_FC_DBGAUD0CH2 0x1207 +#define HDMI_FC_DBGAUD1CH2 0x1208 +#define HDMI_FC_DBGAUD2CH2 0x1209 +#define HDMI_FC_DBGAUD0CH3 0x120A +#define HDMI_FC_DBGAUD1CH3 0x120B +#define HDMI_FC_DBGAUD2CH3 0x120C +#define HDMI_FC_DBGAUD0CH4 0x120D +#define HDMI_FC_DBGAUD1CH4 0x120E +#define HDMI_FC_DBGAUD2CH4 0x120F +#define HDMI_FC_DBGAUD0CH5 0x1210 +#define HDMI_FC_DBGAUD1CH5 0x1211 +#define HDMI_FC_DBGAUD2CH5 0x1212 +#define HDMI_FC_DBGAUD0CH6 0x1213 +#define HDMI_FC_DBGAUD1CH6 0x1214 +#define HDMI_FC_DBGAUD2CH6 0x1215 +#define HDMI_FC_DBGAUD0CH7 0x1216 +#define HDMI_FC_DBGAUD1CH7 0x1217 +#define HDMI_FC_DBGAUD2CH7 0x1218 +#define HDMI_FC_DBGTMDS0 0x1219 +#define HDMI_FC_DBGTMDS1 0x121A +#define HDMI_FC_DBGTMDS2 0x121B + +/* HDMI Source PHY Registers */ +#define HDMI_PHY_CONF0 0x3000 +#define HDMI_PHY_TST0 0x3001 +#define HDMI_PHY_TST1 0x3002 +#define HDMI_PHY_TST2 0x3003 +#define HDMI_PHY_STAT0 0x3004 +#define HDMI_PHY_INT0 0x3005 +#define HDMI_PHY_MASK0 0x3006 +#define HDMI_PHY_POL0 0x3007 + +/* HDMI Master PHY Registers */ +#define HDMI_PHY_I2CM_SLAVE_ADDR 0x3020 +#define HDMI_PHY_I2CM_ADDRESS_ADDR 0x3021 +#define HDMI_PHY_I2CM_DATAO_1_ADDR 0x3022 +#define HDMI_PHY_I2CM_DATAO_0_ADDR 0x3023 +#define HDMI_PHY_I2CM_DATAI_1_ADDR 0x3024 +#define HDMI_PHY_I2CM_DATAI_0_ADDR 0x3025 +#define HDMI_PHY_I2CM_OPERATION_ADDR 0x3026 +#define HDMI_PHY_I2CM_INT_ADDR 0x3027 +#define HDMI_PHY_I2CM_CTLINT_ADDR 0x3028 +#define HDMI_PHY_I2CM_DIV_ADDR 0x3029 +#define HDMI_PHY_I2CM_SOFTRSTZ_ADDR 0x302a +#define HDMI_PHY_I2CM_SS_SCL_HCNT_1_ADDR 0x302b +#define HDMI_PHY_I2CM_SS_SCL_HCNT_0_ADDR 0x302c +#define HDMI_PHY_I2CM_SS_SCL_LCNT_1_ADDR 0x302d +#define HDMI_PHY_I2CM_SS_SCL_LCNT_0_ADDR 0x302e +#define HDMI_PHY_I2CM_FS_SCL_HCNT_1_ADDR 0x302f +#define HDMI_PHY_I2CM_FS_SCL_HCNT_0_ADDR 0x3030 +#define HDMI_PHY_I2CM_FS_SCL_LCNT_1_ADDR 0x3031 +#define HDMI_PHY_I2CM_FS_SCL_LCNT_0_ADDR 0x3032 + +/* Audio Sampler Registers */ +#define HDMI_AUD_CONF0 0x3100 +#define HDMI_AUD_CONF1 0x3101 +#define HDMI_AUD_INT 0x3102 +#define HDMI_AUD_CONF2 0x3103 +#define HDMI_AUD_N1 0x3200 +#define HDMI_AUD_N2 0x3201 +#define HDMI_AUD_N3 0x3202 +#define HDMI_AUD_CTS1 0x3203 +#define HDMI_AUD_CTS2 0x3204 +#define HDMI_AUD_CTS3 0x3205 +#define HDMI_AUD_INPUTCLKFS 0x3206 +#define HDMI_AUD_SPDIFINT 0x3302 +#define HDMI_AUD_CONF0_HBR 0x3400 +#define HDMI_AUD_HBR_STATUS 0x3401 +#define HDMI_AUD_HBR_INT 0x3402 +#define HDMI_AUD_HBR_POL 0x3403 +#define HDMI_AUD_HBR_MASK 0x3404 + +/* Generic Parallel Audio Interface Registers */ +/* Not used as GPAUD interface is not enabled in hw */ +#define HDMI_GP_CONF0 0x3500 +#define HDMI_GP_CONF1 0x3501 +#define HDMI_GP_CONF2 0x3502 +#define HDMI_GP_STAT 0x3503 +#define HDMI_GP_INT 0x3504 +#define HDMI_GP_MASK 0x3505 +#define HDMI_GP_POL 0x3506 + +/* Audio DMA Registers */ +#define HDMI_AHB_DMA_CONF0 0x3600 +#define HDMI_AHB_DMA_START 0x3601 +#define HDMI_AHB_DMA_STOP 0x3602 +#define HDMI_AHB_DMA_THRSLD 0x3603 +#define HDMI_AHB_DMA_STRADDR0 0x3604 +#define HDMI_AHB_DMA_STRADDR1 0x3605 +#define HDMI_AHB_DMA_STRADDR2 0x3606 +#define HDMI_AHB_DMA_STRADDR3 0x3607 +#define HDMI_AHB_DMA_STPADDR0 0x3608 +#define HDMI_AHB_DMA_STPADDR1 0x3609 +#define HDMI_AHB_DMA_STPADDR2 0x360a +#define HDMI_AHB_DMA_STPADDR3 0x360b +#define HDMI_AHB_DMA_BSTADDR0 0x360c +#define HDMI_AHB_DMA_BSTADDR1 0x360d +#define HDMI_AHB_DMA_BSTADDR2 0x360e +#define HDMI_AHB_DMA_BSTADDR3 0x360f +#define HDMI_AHB_DMA_MBLENGTH0 0x3610 +#define HDMI_AHB_DMA_MBLENGTH1 0x3611 +#define HDMI_AHB_DMA_STAT 0x3612 +#define HDMI_AHB_DMA_INT 0x3613 +#define HDMI_AHB_DMA_MASK 0x3614 +#define HDMI_AHB_DMA_POL 0x3615 +#define HDMI_AHB_DMA_CONF1 0x3616 +#define HDMI_AHB_DMA_BUFFSTAT 0x3617 +#define HDMI_AHB_DMA_BUFFINT 0x3618 +#define HDMI_AHB_DMA_BUFFMASK 0x3619 +#define HDMI_AHB_DMA_BUFFPOL 0x361a + +/* Main Controller Registers */ +#define HDMI_MC_SFRDIV 0x4000 +#define HDMI_MC_CLKDIS 0x4001 +#define HDMI_MC_SWRSTZ 0x4002 +#define HDMI_MC_OPCTRL 0x4003 +#define HDMI_MC_FLOWCTRL 0x4004 +#define HDMI_MC_PHYRSTZ 0x4005 +#define HDMI_MC_LOCKONCLOCK 0x4006 +#define HDMI_MC_HEACPHY_RST 0x4007 + +/* Color Space Converter Registers */ +#define HDMI_CSC_CFG 0x4100 +#define HDMI_CSC_SCALE 0x4101 +#define HDMI_CSC_COEF_A1_MSB 0x4102 +#define HDMI_CSC_COEF_A1_LSB 0x4103 +#define HDMI_CSC_COEF_A2_MSB 0x4104 +#define HDMI_CSC_COEF_A2_LSB 0x4105 +#define HDMI_CSC_COEF_A3_MSB 0x4106 +#define HDMI_CSC_COEF_A3_LSB 0x4107 +#define HDMI_CSC_COEF_A4_MSB 0x4108 +#define HDMI_CSC_COEF_A4_LSB 0x4109 +#define HDMI_CSC_COEF_B1_MSB 0x410A +#define HDMI_CSC_COEF_B1_LSB 0x410B +#define HDMI_CSC_COEF_B2_MSB 0x410C +#define HDMI_CSC_COEF_B2_LSB 0x410D +#define HDMI_CSC_COEF_B3_MSB 0x410E +#define HDMI_CSC_COEF_B3_LSB 0x410F +#define HDMI_CSC_COEF_B4_MSB 0x4110 +#define HDMI_CSC_COEF_B4_LSB 0x4111 +#define HDMI_CSC_COEF_C1_MSB 0x4112 +#define HDMI_CSC_COEF_C1_LSB 0x4113 +#define HDMI_CSC_COEF_C2_MSB 0x4114 +#define HDMI_CSC_COEF_C2_LSB 0x4115 +#define HDMI_CSC_COEF_C3_MSB 0x4116 +#define HDMI_CSC_COEF_C3_LSB 0x4117 +#define HDMI_CSC_COEF_C4_MSB 0x4118 +#define HDMI_CSC_COEF_C4_LSB 0x4119 + +/* HDCP Encryption Engine Registers */ +#define HDMI_A_HDCPCFG0 0x5000 +#define HDMI_A_HDCPCFG1 0x5001 +#define HDMI_A_HDCPOBS0 0x5002 +#define HDMI_A_HDCPOBS1 0x5003 +#define HDMI_A_HDCPOBS2 0x5004 +#define HDMI_A_HDCPOBS3 0x5005 +#define HDMI_A_APIINTCLR 0x5006 +#define HDMI_A_APIINTSTAT 0x5007 +#define HDMI_A_APIINTMSK 0x5008 +#define HDMI_A_VIDPOLCFG 0x5009 +#define HDMI_A_OESSWCFG 0x500A +#define HDMI_A_TIMER1SETUP0 0x500B +#define HDMI_A_TIMER1SETUP1 0x500C +#define HDMI_A_TIMER2SETUP0 0x500D +#define HDMI_A_TIMER2SETUP1 0x500E +#define HDMI_A_100MSCFG 0x500F +#define HDMI_A_2SCFG0 0x5010 +#define HDMI_A_2SCFG1 0x5011 +#define HDMI_A_5SCFG0 0x5012 +#define HDMI_A_5SCFG1 0x5013 +#define HDMI_A_SRMVERLSB 0x5014 +#define HDMI_A_SRMVERMSB 0x5015 +#define HDMI_A_SRMCTRL 0x5016 +#define HDMI_A_SFRSETUP 0x5017 +#define HDMI_A_I2CHSETUP 0x5018 +#define HDMI_A_INTSETUP 0x5019 +#define HDMI_A_PRESETUP 0x501A +#define HDMI_A_SRM_BASE 0x5020 + +/* CEC Engine Registers */ +#define HDMI_CEC_CTRL 0x7D00 +#define HDMI_CEC_STAT 0x7D01 +#define HDMI_CEC_MASK 0x7D02 +#define HDMI_CEC_POLARITY 0x7D03 +#define HDMI_CEC_INT 0x7D04 +#define HDMI_CEC_ADDR_L 0x7D05 +#define HDMI_CEC_ADDR_H 0x7D06 +#define HDMI_CEC_TX_CNT 0x7D07 +#define HDMI_CEC_RX_CNT 0x7D08 +#define HDMI_CEC_TX_DATA0 0x7D10 +#define HDMI_CEC_TX_DATA1 0x7D11 +#define HDMI_CEC_TX_DATA2 0x7D12 +#define HDMI_CEC_TX_DATA3 0x7D13 +#define HDMI_CEC_TX_DATA4 0x7D14 +#define HDMI_CEC_TX_DATA5 0x7D15 +#define HDMI_CEC_TX_DATA6 0x7D16 +#define HDMI_CEC_TX_DATA7 0x7D17 +#define HDMI_CEC_TX_DATA8 0x7D18 +#define HDMI_CEC_TX_DATA9 0x7D19 +#define HDMI_CEC_TX_DATA10 0x7D1a +#define HDMI_CEC_TX_DATA11 0x7D1b +#define HDMI_CEC_TX_DATA12 0x7D1c +#define HDMI_CEC_TX_DATA13 0x7D1d +#define HDMI_CEC_TX_DATA14 0x7D1e +#define HDMI_CEC_TX_DATA15 0x7D1f +#define HDMI_CEC_RX_DATA0 0x7D20 +#define HDMI_CEC_RX_DATA1 0x7D21 +#define HDMI_CEC_RX_DATA2 0x7D22 +#define HDMI_CEC_RX_DATA3 0x7D23 +#define HDMI_CEC_RX_DATA4 0x7D24 +#define HDMI_CEC_RX_DATA5 0x7D25 +#define HDMI_CEC_RX_DATA6 0x7D26 +#define HDMI_CEC_RX_DATA7 0x7D27 +#define HDMI_CEC_RX_DATA8 0x7D28 +#define HDMI_CEC_RX_DATA9 0x7D29 +#define HDMI_CEC_RX_DATA10 0x7D2a +#define HDMI_CEC_RX_DATA11 0x7D2b +#define HDMI_CEC_RX_DATA12 0x7D2c +#define HDMI_CEC_RX_DATA13 0x7D2d +#define HDMI_CEC_RX_DATA14 0x7D2e +#define HDMI_CEC_RX_DATA15 0x7D2f +#define HDMI_CEC_LOCK 0x7D30 +#define HDMI_CEC_WKUPCTRL 0x7D31 + +/* I2C Master Registers (E-DDC) */ +#define HDMI_I2CM_SLAVE 0x7E00 +#define HDMI_I2CMESS 0x7E01 +#define HDMI_I2CM_DATAO 0x7E02 +#define HDMI_I2CM_DATAI 0x7E03 +#define HDMI_I2CM_OPERATION 0x7E04 +#define HDMI_I2CM_INT 0x7E05 +#define HDMI_I2CM_CTLINT 0x7E06 +#define HDMI_I2CM_DIV 0x7E07 +#define HDMI_I2CM_SEGADDR 0x7E08 +#define HDMI_I2CM_SOFTRSTZ 0x7E09 +#define HDMI_I2CM_SEGPTR 0x7E0A +#define HDMI_I2CM_SS_SCL_HCNT_1_ADDR 0x7E0B +#define HDMI_I2CM_SS_SCL_HCNT_0_ADDR 0x7E0C +#define HDMI_I2CM_SS_SCL_LCNT_1_ADDR 0x7E0D +#define HDMI_I2CM_SS_SCL_LCNT_0_ADDR 0x7E0E +#define HDMI_I2CM_FS_SCL_HCNT_1_ADDR 0x7E0F +#define HDMI_I2CM_FS_SCL_HCNT_0_ADDR 0x7E10 +#define HDMI_I2CM_FS_SCL_LCNT_1_ADDR 0x7E11 +#define HDMI_I2CM_FS_SCL_LCNT_0_ADDR 0x7E12 + +/* Random Number Generator Registers (RNG) */ +#define HDMI_RNG_BASE 0x8000 + + +/* + * Register field definitions + */ +enum { +/* IH_FC_INT2 field values */ + HDMI_IH_FC_INT2_OVERFLOW_MASK = 0x03, + HDMI_IH_FC_INT2_LOW_PRIORITY_OVERFLOW = 0x02, + HDMI_IH_FC_INT2_HIGH_PRIORITY_OVERFLOW = 0x01, + +/* IH_FC_STAT2 field values */ + HDMI_IH_FC_STAT2_OVERFLOW_MASK = 0x03, + HDMI_IH_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02, + HDMI_IH_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01, + +/* IH_PHY_STAT0 field values */ + HDMI_IH_PHY_STAT0_RX_SENSE3 = 0x20, + HDMI_IH_PHY_STAT0_RX_SENSE2 = 0x10, + HDMI_IH_PHY_STAT0_RX_SENSE1 = 0x8, + HDMI_IH_PHY_STAT0_RX_SENSE0 = 0x4, + HDMI_IH_PHY_STAT0_TX_PHY_LOCK = 0x2, + HDMI_IH_PHY_STAT0_HPD = 0x1, + +/* IH_MUTE_I2CMPHY_STAT0 field values */ + HDMI_IH_MUTE_I2CMPHY_STAT0_I2CMPHYDONE = 0x2, + HDMI_IH_MUTE_I2CMPHY_STAT0_I2CMPHYERROR = 0x1, + +/* IH_AHBDMAAUD_STAT0 field values */ + HDMI_IH_AHBDMAAUD_STAT0_ERROR = 0x20, + HDMI_IH_AHBDMAAUD_STAT0_LOST = 0x10, + HDMI_IH_AHBDMAAUD_STAT0_RETRY = 0x08, + HDMI_IH_AHBDMAAUD_STAT0_DONE = 0x04, + HDMI_IH_AHBDMAAUD_STAT0_BUFFFULL = 0x02, + HDMI_IH_AHBDMAAUD_STAT0_BUFFEMPTY = 0x01, + +/* IH_MUTE_FC_STAT2 field values */ + HDMI_IH_MUTE_FC_STAT2_OVERFLOW_MASK = 0x03, + HDMI_IH_MUTE_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02, + HDMI_IH_MUTE_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01, + +/* IH_MUTE_AHBDMAAUD_STAT0 field values */ + HDMI_IH_MUTE_AHBDMAAUD_STAT0_ERROR = 0x20, + HDMI_IH_MUTE_AHBDMAAUD_STAT0_LOST = 0x10, + HDMI_IH_MUTE_AHBDMAAUD_STAT0_RETRY = 0x08, + HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE = 0x04, + HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFFULL = 0x02, + HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFEMPTY = 0x01, + +/* IH_MUTE field values */ + HDMI_IH_MUTE_MUTE_WAKEUP_INTERRUPT = 0x2, + HDMI_IH_MUTE_MUTE_ALL_INTERRUPT = 0x1, + +/* TX_INVID0 field values */ + HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_MASK = 0x80, + HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_ENABLE = 0x80, + HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_DISABLE = 0x00, + HDMI_TX_INVID0_VIDEO_MAPPING_MASK = 0x1F, + HDMI_TX_INVID0_VIDEO_MAPPING_OFFSET = 0, + +/* TX_INSTUFFING field values */ + HDMI_TX_INSTUFFING_BDBDATA_STUFFING_MASK = 0x4, + HDMI_TX_INSTUFFING_BDBDATA_STUFFING_ENABLE = 0x4, + HDMI_TX_INSTUFFING_BDBDATA_STUFFING_DISABLE = 0x0, + HDMI_TX_INSTUFFING_RCRDATA_STUFFING_MASK = 0x2, + HDMI_TX_INSTUFFING_RCRDATA_STUFFING_ENABLE = 0x2, + HDMI_TX_INSTUFFING_RCRDATA_STUFFING_DISABLE = 0x0, + HDMI_TX_INSTUFFING_GYDATA_STUFFING_MASK = 0x1, + HDMI_TX_INSTUFFING_GYDATA_STUFFING_ENABLE = 0x1, + HDMI_TX_INSTUFFING_GYDATA_STUFFING_DISABLE = 0x0, + +/* VP_PR_CD field values */ + HDMI_VP_PR_CD_COLOR_DEPTH_MASK = 0xF0, + HDMI_VP_PR_CD_COLOR_DEPTH_OFFSET = 4, + HDMI_VP_PR_CD_DESIRED_PR_FACTOR_MASK = 0x0F, + HDMI_VP_PR_CD_DESIRED_PR_FACTOR_OFFSET = 0, + +/* VP_STUFF field values */ + HDMI_VP_STUFF_IDEFAULT_PHASE_MASK = 0x20, + HDMI_VP_STUFF_IDEFAULT_PHASE_OFFSET = 5, + HDMI_VP_STUFF_IFIX_PP_TO_LAST_MASK = 0x10, + HDMI_VP_STUFF_IFIX_PP_TO_LAST_OFFSET = 4, + HDMI_VP_STUFF_ICX_GOTO_P0_ST_MASK = 0x8, + HDMI_VP_STUFF_ICX_GOTO_P0_ST_OFFSET = 3, + HDMI_VP_STUFF_YCC422_STUFFING_MASK = 0x4, + HDMI_VP_STUFF_YCC422_STUFFING_STUFFING_MODE = 0x4, + HDMI_VP_STUFF_YCC422_STUFFING_DIRECT_MODE = 0x0, + HDMI_VP_STUFF_PP_STUFFING_MASK = 0x2, + HDMI_VP_STUFF_PP_STUFFING_STUFFING_MODE = 0x2, + HDMI_VP_STUFF_PP_STUFFING_DIRECT_MODE = 0x0, + HDMI_VP_STUFF_PR_STUFFING_MASK = 0x1, + HDMI_VP_STUFF_PR_STUFFING_STUFFING_MODE = 0x1, + HDMI_VP_STUFF_PR_STUFFING_DIRECT_MODE = 0x0, + +/* VP_CONF field values */ + HDMI_VP_CONF_BYPASS_EN_MASK = 0x40, + HDMI_VP_CONF_BYPASS_EN_ENABLE = 0x40, + HDMI_VP_CONF_BYPASS_EN_DISABLE = 0x00, + HDMI_VP_CONF_PP_EN_ENMASK = 0x20, + HDMI_VP_CONF_PP_EN_ENABLE = 0x20, + HDMI_VP_CONF_PP_EN_DISABLE = 0x00, + HDMI_VP_CONF_PR_EN_MASK = 0x10, + HDMI_VP_CONF_PR_EN_ENABLE = 0x10, + HDMI_VP_CONF_PR_EN_DISABLE = 0x00, + HDMI_VP_CONF_YCC422_EN_MASK = 0x8, + HDMI_VP_CONF_YCC422_EN_ENABLE = 0x8, + HDMI_VP_CONF_YCC422_EN_DISABLE = 0x0, + HDMI_VP_CONF_BYPASS_SELECT_MASK = 0x4, + HDMI_VP_CONF_BYPASS_SELECT_VID_PACKETIZER = 0x4, + HDMI_VP_CONF_BYPASS_SELECT_PIX_REPEATER = 0x0, + HDMI_VP_CONF_OUTPUT_SELECTOR_MASK = 0x3, + HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS = 0x3, + HDMI_VP_CONF_OUTPUT_SELECTOR_YCC422 = 0x1, + HDMI_VP_CONF_OUTPUT_SELECTOR_PP = 0x0, + +/* VP_REMAP field values */ + HDMI_VP_REMAP_MASK = 0x3, + HDMI_VP_REMAP_YCC422_24bit = 0x2, + HDMI_VP_REMAP_YCC422_20bit = 0x1, + HDMI_VP_REMAP_YCC422_16bit = 0x0, + +/* FC_INVIDCONF field values */ + HDMI_FC_INVIDCONF_HDCP_KEEPOUT_MASK = 0x80, + HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE = 0x80, + HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE = 0x00, + HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_MASK = 0x40, + HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_HIGH = 0x40, + HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_LOW = 0x00, + HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_MASK = 0x20, + HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_HIGH = 0x20, + HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_LOW = 0x00, + HDMI_FC_INVIDCONF_DE_IN_POLARITY_MASK = 0x10, + HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_HIGH = 0x10, + HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_LOW = 0x00, + HDMI_FC_INVIDCONF_DVI_MODEZ_MASK = 0x8, + HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE = 0x8, + HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE = 0x0, + HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_MASK = 0x2, + HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_HIGH = 0x2, + HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_LOW = 0x0, + HDMI_FC_INVIDCONF_IN_I_P_MASK = 0x1, + HDMI_FC_INVIDCONF_IN_I_P_INTERLACED = 0x1, + HDMI_FC_INVIDCONF_IN_I_P_PROGRESSIVE = 0x0, + +/* FC_AUDICONF0 field values */ + HDMI_FC_AUDICONF0_CC_OFFSET = 4, + HDMI_FC_AUDICONF0_CC_MASK = 0x70, + HDMI_FC_AUDICONF0_CT_OFFSET = 0, + HDMI_FC_AUDICONF0_CT_MASK = 0xF, + +/* FC_AUDICONF1 field values */ + HDMI_FC_AUDICONF1_SS_OFFSET = 3, + HDMI_FC_AUDICONF1_SS_MASK = 0x18, + HDMI_FC_AUDICONF1_SF_OFFSET = 0, + HDMI_FC_AUDICONF1_SF_MASK = 0x7, + +/* FC_AUDICONF3 field values */ + HDMI_FC_AUDICONF3_LFEPBL_OFFSET = 5, + HDMI_FC_AUDICONF3_LFEPBL_MASK = 0x60, + HDMI_FC_AUDICONF3_DM_INH_OFFSET = 4, + HDMI_FC_AUDICONF3_DM_INH_MASK = 0x10, + HDMI_FC_AUDICONF3_LSV_OFFSET = 0, + HDMI_FC_AUDICONF3_LSV_MASK = 0xF, + +/* FC_AUDSCHNLS0 field values */ + HDMI_FC_AUDSCHNLS0_CGMSA_OFFSET = 4, + HDMI_FC_AUDSCHNLS0_CGMSA_MASK = 0x30, + HDMI_FC_AUDSCHNLS0_COPYRIGHT_OFFSET = 0, + HDMI_FC_AUDSCHNLS0_COPYRIGHT_MASK = 0x01, + +/* FC_AUDSCHNLS3-6 field values */ + HDMI_FC_AUDSCHNLS3_OIEC_CH0_OFFSET = 0, + HDMI_FC_AUDSCHNLS3_OIEC_CH0_MASK = 0x0f, + HDMI_FC_AUDSCHNLS3_OIEC_CH1_OFFSET = 4, + HDMI_FC_AUDSCHNLS3_OIEC_CH1_MASK = 0xf0, + HDMI_FC_AUDSCHNLS4_OIEC_CH2_OFFSET = 0, + HDMI_FC_AUDSCHNLS4_OIEC_CH2_MASK = 0x0f, + HDMI_FC_AUDSCHNLS4_OIEC_CH3_OFFSET = 4, + HDMI_FC_AUDSCHNLS4_OIEC_CH3_MASK = 0xf0, + + HDMI_FC_AUDSCHNLS5_OIEC_CH0_OFFSET = 0, + HDMI_FC_AUDSCHNLS5_OIEC_CH0_MASK = 0x0f, + HDMI_FC_AUDSCHNLS5_OIEC_CH1_OFFSET = 4, + HDMI_FC_AUDSCHNLS5_OIEC_CH1_MASK = 0xf0, + HDMI_FC_AUDSCHNLS6_OIEC_CH2_OFFSET = 0, + HDMI_FC_AUDSCHNLS6_OIEC_CH2_MASK = 0x0f, + HDMI_FC_AUDSCHNLS6_OIEC_CH3_OFFSET = 4, + HDMI_FC_AUDSCHNLS6_OIEC_CH3_MASK = 0xf0, + +/* HDMI_FC_AUDSCHNLS7 field values */ + HDMI_FC_AUDSCHNLS7_ACCURACY_OFFSET = 4, + HDMI_FC_AUDSCHNLS7_ACCURACY_MASK = 0x30, + +/* HDMI_FC_AUDSCHNLS8 field values */ + HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_MASK = 0xf0, + HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_OFFSET = 4, + HDMI_FC_AUDSCHNLS8_WORDLEGNTH_MASK = 0x0f, + HDMI_FC_AUDSCHNLS8_WORDLEGNTH_OFFSET = 0, + +/* FC_AUDSCONF field values */ + HDMI_FC_AUDSCONF_AUD_PACKET_SAMPFIT_MASK = 0xF0, + HDMI_FC_AUDSCONF_AUD_PACKET_SAMPFIT_OFFSET = 4, + HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_MASK = 0x1, + HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_OFFSET = 0, + HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_LAYOUT1 = 0x1, + HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_LAYOUT0 = 0x0, + +/* FC_STAT2 field values */ + HDMI_FC_STAT2_OVERFLOW_MASK = 0x03, + HDMI_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02, + HDMI_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01, + +/* FC_INT2 field values */ + HDMI_FC_INT2_OVERFLOW_MASK = 0x03, + HDMI_FC_INT2_LOW_PRIORITY_OVERFLOW = 0x02, + HDMI_FC_INT2_HIGH_PRIORITY_OVERFLOW = 0x01, + +/* FC_MASK2 field values */ + HDMI_FC_MASK2_OVERFLOW_MASK = 0x03, + HDMI_FC_MASK2_LOW_PRIORITY_OVERFLOW = 0x02, + HDMI_FC_MASK2_HIGH_PRIORITY_OVERFLOW = 0x01, + +/* FC_PRCONF field values */ + HDMI_FC_PRCONF_INCOMING_PR_FACTOR_MASK = 0xF0, + HDMI_FC_PRCONF_INCOMING_PR_FACTOR_OFFSET = 4, + HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_MASK = 0x0F, + HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_OFFSET = 0, + +/* FC_AVICONF0-FC_AVICONF3 field values */ + HDMI_FC_AVICONF0_PIX_FMT_MASK = 0x03, + HDMI_FC_AVICONF0_PIX_FMT_RGB = 0x00, + HDMI_FC_AVICONF0_PIX_FMT_YCBCR422 = 0x01, + HDMI_FC_AVICONF0_PIX_FMT_YCBCR444 = 0x02, + HDMI_FC_AVICONF0_ACTIVE_FMT_MASK = 0x40, + HDMI_FC_AVICONF0_ACTIVE_FMT_INFO_PRESENT = 0x40, + HDMI_FC_AVICONF0_ACTIVE_FMT_NO_INFO = 0x00, + HDMI_FC_AVICONF0_BAR_DATA_MASK = 0x0C, + HDMI_FC_AVICONF0_BAR_DATA_NO_DATA = 0x00, + HDMI_FC_AVICONF0_BAR_DATA_VERT_BAR = 0x04, + HDMI_FC_AVICONF0_BAR_DATA_HORIZ_BAR = 0x08, + HDMI_FC_AVICONF0_BAR_DATA_VERT_HORIZ_BAR = 0x0C, + HDMI_FC_AVICONF0_SCAN_INFO_MASK = 0x30, + HDMI_FC_AVICONF0_SCAN_INFO_OVERSCAN = 0x10, + HDMI_FC_AVICONF0_SCAN_INFO_UNDERSCAN = 0x20, + HDMI_FC_AVICONF0_SCAN_INFO_NODATA = 0x00, + + HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_MASK = 0x0F, + HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_USE_CODED = 0x08, + HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_4_3 = 0x09, + HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_16_9 = 0x0A, + HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_14_9 = 0x0B, + HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_MASK = 0x30, + HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_NO_DATA = 0x00, + HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_4_3 = 0x10, + HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_16_9 = 0x20, + HDMI_FC_AVICONF1_COLORIMETRY_MASK = 0xC0, + HDMI_FC_AVICONF1_COLORIMETRY_NO_DATA = 0x00, + HDMI_FC_AVICONF1_COLORIMETRY_SMPTE = 0x40, + HDMI_FC_AVICONF1_COLORIMETRY_ITUR = 0x80, + HDMI_FC_AVICONF1_COLORIMETRY_EXTENDED_INFO = 0xC0, + + HDMI_FC_AVICONF2_SCALING_MASK = 0x03, + HDMI_FC_AVICONF2_SCALING_NONE = 0x00, + HDMI_FC_AVICONF2_SCALING_HORIZ = 0x01, + HDMI_FC_AVICONF2_SCALING_VERT = 0x02, + HDMI_FC_AVICONF2_SCALING_HORIZ_VERT = 0x03, + HDMI_FC_AVICONF2_RGB_QUANT_MASK = 0x0C, + HDMI_FC_AVICONF2_RGB_QUANT_DEFAULT = 0x00, + HDMI_FC_AVICONF2_RGB_QUANT_LIMITED_RANGE = 0x04, + HDMI_FC_AVICONF2_RGB_QUANT_FULL_RANGE = 0x08, + HDMI_FC_AVICONF2_EXT_COLORIMETRY_MASK = 0x70, + HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC601 = 0x00, + HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC709 = 0x10, + HDMI_FC_AVICONF2_EXT_COLORIMETRY_SYCC601 = 0x20, + HDMI_FC_AVICONF2_EXT_COLORIMETRY_ADOBE_YCC601 = 0x30, + HDMI_FC_AVICONF2_EXT_COLORIMETRY_ADOBE_RGB = 0x40, + HDMI_FC_AVICONF2_IT_CONTENT_MASK = 0x80, + HDMI_FC_AVICONF2_IT_CONTENT_NO_DATA = 0x00, + HDMI_FC_AVICONF2_IT_CONTENT_VALID = 0x80, + + HDMI_FC_AVICONF3_IT_CONTENT_TYPE_MASK = 0x03, + HDMI_FC_AVICONF3_IT_CONTENT_TYPE_GRAPHICS = 0x00, + HDMI_FC_AVICONF3_IT_CONTENT_TYPE_PHOTO = 0x01, + HDMI_FC_AVICONF3_IT_CONTENT_TYPE_CINEMA = 0x02, + HDMI_FC_AVICONF3_IT_CONTENT_TYPE_GAME = 0x03, + HDMI_FC_AVICONF3_QUANT_RANGE_MASK = 0x0C, + HDMI_FC_AVICONF3_QUANT_RANGE_LIMITED = 0x00, + HDMI_FC_AVICONF3_QUANT_RANGE_FULL = 0x04, + +/* FC_DBGFORCE field values */ + HDMI_FC_DBGFORCE_FORCEAUDIO = 0x10, + HDMI_FC_DBGFORCE_FORCEVIDEO = 0x1, + +/* PHY_CONF0 field values */ + HDMI_PHY_CONF0_PDZ_MASK = 0x80, + HDMI_PHY_CONF0_PDZ_OFFSET = 7, + HDMI_PHY_CONF0_ENTMDS_MASK = 0x40, + HDMI_PHY_CONF0_ENTMDS_OFFSET = 6, + HDMI_PHY_CONF0_SPARECTRL = 0x20, + HDMI_PHY_CONF0_GEN2_PDDQ_MASK = 0x10, + HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET = 4, + HDMI_PHY_CONF0_GEN2_TXPWRON_MASK = 0x8, + HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET = 3, + HDMI_PHY_CONF0_GEN2_ENHPDRXSENSE_MASK = 0x4, + HDMI_PHY_CONF0_GEN2_ENHPDRXSENSE_OFFSET = 2, + HDMI_PHY_CONF0_SELDATAENPOL_MASK = 0x2, + HDMI_PHY_CONF0_SELDATAENPOL_OFFSET = 1, + HDMI_PHY_CONF0_SELDIPIF_MASK = 0x1, + HDMI_PHY_CONF0_SELDIPIF_OFFSET = 0, + +/* PHY_TST0 field values */ + HDMI_PHY_TST0_TSTCLR_MASK = 0x20, + HDMI_PHY_TST0_TSTCLR_OFFSET = 5, + HDMI_PHY_TST0_TSTEN_MASK = 0x10, + HDMI_PHY_TST0_TSTEN_OFFSET = 4, + HDMI_PHY_TST0_TSTCLK_MASK = 0x1, + HDMI_PHY_TST0_TSTCLK_OFFSET = 0, + +/* PHY_STAT0 field values */ + HDMI_PHY_RX_SENSE3 = 0x80, + HDMI_PHY_RX_SENSE2 = 0x40, + HDMI_PHY_RX_SENSE1 = 0x20, + HDMI_PHY_RX_SENSE0 = 0x10, + HDMI_PHY_HPD = 0x02, + HDMI_PHY_TX_PHY_LOCK = 0x01, + +/* PHY_I2CM_SLAVE_ADDR field values */ + HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2 = 0x69, + HDMI_PHY_I2CM_SLAVE_ADDR_HEAC_PHY = 0x49, + +/* PHY_I2CM_OPERATION_ADDR field values */ + HDMI_PHY_I2CM_OPERATION_ADDR_WRITE = 0x10, + HDMI_PHY_I2CM_OPERATION_ADDR_READ = 0x1, + +/* HDMI_PHY_I2CM_INT_ADDR */ + HDMI_PHY_I2CM_INT_ADDR_DONE_POL = 0x08, + HDMI_PHY_I2CM_INT_ADDR_DONE_MASK = 0x04, + +/* HDMI_PHY_I2CM_CTLINT_ADDR */ + HDMI_PHY_I2CM_CTLINT_ADDR_NAC_POL = 0x80, + HDMI_PHY_I2CM_CTLINT_ADDR_NAC_MASK = 0x40, + HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL = 0x08, + HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_MASK = 0x04, + +/* AUD_CTS3 field values */ + HDMI_AUD_CTS3_N_SHIFT_OFFSET = 5, + HDMI_AUD_CTS3_N_SHIFT_MASK = 0xe0, + HDMI_AUD_CTS3_N_SHIFT_1 = 0, + HDMI_AUD_CTS3_N_SHIFT_16 = 0x20, + HDMI_AUD_CTS3_N_SHIFT_32 = 0x40, + HDMI_AUD_CTS3_N_SHIFT_64 = 0x60, + HDMI_AUD_CTS3_N_SHIFT_128 = 0x80, + HDMI_AUD_CTS3_N_SHIFT_256 = 0xa0, + /* note that the CTS3 MANUAL bit has been removed + from our part. Can't set it, will read as 0. */ + HDMI_AUD_CTS3_CTS_MANUAL = 0x10, + HDMI_AUD_CTS3_AUDCTS19_16_MASK = 0x0f, + +/* AHB_DMA_CONF0 field values */ + HDMI_AHB_DMA_CONF0_SW_FIFO_RST_OFFSET = 7, + HDMI_AHB_DMA_CONF0_SW_FIFO_RST_MASK = 0x80, + HDMI_AHB_DMA_CONF0_HBR = 0x10, + HDMI_AHB_DMA_CONF0_EN_HLOCK_OFFSET = 3, + HDMI_AHB_DMA_CONF0_EN_HLOCK_MASK = 0x08, + HDMI_AHB_DMA_CONF0_INCR_TYPE_OFFSET = 1, + HDMI_AHB_DMA_CONF0_INCR_TYPE_MASK = 0x06, + HDMI_AHB_DMA_CONF0_INCR4 = 0x0, + HDMI_AHB_DMA_CONF0_INCR8 = 0x2, + HDMI_AHB_DMA_CONF0_INCR16 = 0x4, + HDMI_AHB_DMA_CONF0_BURST_MODE = 0x1, + +/* HDMI_AHB_DMA_START field values */ + HDMI_AHB_DMA_START_START_OFFSET = 0, + HDMI_AHB_DMA_START_START_MASK = 0x01, + +/* HDMI_AHB_DMA_STOP field values */ + HDMI_AHB_DMA_STOP_STOP_OFFSET = 0, + HDMI_AHB_DMA_STOP_STOP_MASK = 0x01, + +/* AHB_DMA_STAT, AHB_DMA_INT, AHB_DMA_MASK, AHB_DMA_POL field values */ + HDMI_AHB_DMA_DONE = 0x80, + HDMI_AHB_DMA_RETRY_SPLIT = 0x40, + HDMI_AHB_DMA_LOSTOWNERSHIP = 0x20, + HDMI_AHB_DMA_ERROR = 0x10, + HDMI_AHB_DMA_FIFO_THREMPTY = 0x04, + HDMI_AHB_DMA_FIFO_FULL = 0x02, + HDMI_AHB_DMA_FIFO_EMPTY = 0x01, + +/* AHB_DMA_BUFFSTAT, AHB_DMA_BUFFINT, AHB_DMA_BUFFMASK, AHB_DMA_BUFFPOL field values */ + HDMI_AHB_DMA_BUFFSTAT_FULL = 0x02, + HDMI_AHB_DMA_BUFFSTAT_EMPTY = 0x01, + +/* MC_CLKDIS field values */ + HDMI_MC_CLKDIS_HDCPCLK_DISABLE = 0x40, + HDMI_MC_CLKDIS_CECCLK_DISABLE = 0x20, + HDMI_MC_CLKDIS_CSCCLK_DISABLE = 0x10, + HDMI_MC_CLKDIS_AUDCLK_DISABLE = 0x8, + HDMI_MC_CLKDIS_PREPCLK_DISABLE = 0x4, + HDMI_MC_CLKDIS_TMDSCLK_DISABLE = 0x2, + HDMI_MC_CLKDIS_PIXELCLK_DISABLE = 0x1, + +/* MC_SWRSTZ field values */ + HDMI_MC_SWRSTZ_TMDSSWRST_REQ = 0x02, + +/* MC_FLOWCTRL field values */ + HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_MASK = 0x1, + HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_IN_PATH = 0x1, + HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_BYPASS = 0x0, + +/* MC_PHYRSTZ field values */ + HDMI_MC_PHYRSTZ_ASSERT = 0x0, + HDMI_MC_PHYRSTZ_DEASSERT = 0x1, + +/* MC_HEACPHY_RST field values */ + HDMI_MC_HEACPHY_RST_ASSERT = 0x1, + HDMI_MC_HEACPHY_RST_DEASSERT = 0x0, + +/* CSC_CFG field values */ + HDMI_CSC_CFG_INTMODE_MASK = 0x30, + HDMI_CSC_CFG_INTMODE_OFFSET = 4, + HDMI_CSC_CFG_INTMODE_DISABLE = 0x00, + HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA1 = 0x10, + HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA2 = 0x20, + HDMI_CSC_CFG_DECMODE_MASK = 0x3, + HDMI_CSC_CFG_DECMODE_OFFSET = 0, + HDMI_CSC_CFG_DECMODE_DISABLE = 0x0, + HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA1 = 0x1, + HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA2 = 0x2, + HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA3 = 0x3, + +/* CSC_SCALE field values */ + HDMI_CSC_SCALE_CSC_COLORDE_PTH_MASK = 0xF0, + HDMI_CSC_SCALE_CSC_COLORDE_PTH_24BPP = 0x00, + HDMI_CSC_SCALE_CSC_COLORDE_PTH_30BPP = 0x50, + HDMI_CSC_SCALE_CSC_COLORDE_PTH_36BPP = 0x60, + HDMI_CSC_SCALE_CSC_COLORDE_PTH_48BPP = 0x70, + HDMI_CSC_SCALE_CSCSCALE_MASK = 0x03, + +/* A_HDCPCFG0 field values */ + HDMI_A_HDCPCFG0_ELVENA_MASK = 0x80, + HDMI_A_HDCPCFG0_ELVENA_ENABLE = 0x80, + HDMI_A_HDCPCFG0_ELVENA_DISABLE = 0x00, + HDMI_A_HDCPCFG0_I2CFASTMODE_MASK = 0x40, + HDMI_A_HDCPCFG0_I2CFASTMODE_ENABLE = 0x40, + HDMI_A_HDCPCFG0_I2CFASTMODE_DISABLE = 0x00, + HDMI_A_HDCPCFG0_BYPENCRYPTION_MASK = 0x20, + HDMI_A_HDCPCFG0_BYPENCRYPTION_ENABLE = 0x20, + HDMI_A_HDCPCFG0_BYPENCRYPTION_DISABLE = 0x00, + HDMI_A_HDCPCFG0_SYNCRICHECK_MASK = 0x10, + HDMI_A_HDCPCFG0_SYNCRICHECK_ENABLE = 0x10, + HDMI_A_HDCPCFG0_SYNCRICHECK_DISABLE = 0x00, + HDMI_A_HDCPCFG0_AVMUTE_MASK = 0x8, + HDMI_A_HDCPCFG0_AVMUTE_ENABLE = 0x8, + HDMI_A_HDCPCFG0_AVMUTE_DISABLE = 0x0, + HDMI_A_HDCPCFG0_RXDETECT_MASK = 0x4, + HDMI_A_HDCPCFG0_RXDETECT_ENABLE = 0x4, + HDMI_A_HDCPCFG0_RXDETECT_DISABLE = 0x0, + HDMI_A_HDCPCFG0_EN11FEATURE_MASK = 0x2, + HDMI_A_HDCPCFG0_EN11FEATURE_ENABLE = 0x2, + HDMI_A_HDCPCFG0_EN11FEATURE_DISABLE = 0x0, + HDMI_A_HDCPCFG0_HDMIDVI_MASK = 0x1, + HDMI_A_HDCPCFG0_HDMIDVI_HDMI = 0x1, + HDMI_A_HDCPCFG0_HDMIDVI_DVI = 0x0, + +/* A_HDCPCFG1 field values */ + HDMI_A_HDCPCFG1_DISSHA1CHECK_MASK = 0x8, + HDMI_A_HDCPCFG1_DISSHA1CHECK_DISABLE = 0x8, + HDMI_A_HDCPCFG1_DISSHA1CHECK_ENABLE = 0x0, + HDMI_A_HDCPCFG1_PH2UPSHFTENC_MASK = 0x4, + HDMI_A_HDCPCFG1_PH2UPSHFTENC_ENABLE = 0x4, + HDMI_A_HDCPCFG1_PH2UPSHFTENC_DISABLE = 0x0, + HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_MASK = 0x2, + HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_DISABLE = 0x2, + HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_ENABLE = 0x0, + HDMI_A_HDCPCFG1_SWRESET_MASK = 0x1, + HDMI_A_HDCPCFG1_SWRESET_ASSERT = 0x0, + +/* A_VIDPOLCFG field values */ + HDMI_A_VIDPOLCFG_UNENCRYPTCONF_MASK = 0x60, + HDMI_A_VIDPOLCFG_UNENCRYPTCONF_OFFSET = 5, + HDMI_A_VIDPOLCFG_DATAENPOL_MASK = 0x10, + HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_HIGH = 0x10, + HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_LOW = 0x0, + HDMI_A_VIDPOLCFG_VSYNCPOL_MASK = 0x8, + HDMI_A_VIDPOLCFG_VSYNCPOL_ACTIVE_HIGH = 0x8, + HDMI_A_VIDPOLCFG_VSYNCPOL_ACTIVE_LOW = 0x0, + HDMI_A_VIDPOLCFG_HSYNCPOL_MASK = 0x2, + HDMI_A_VIDPOLCFG_HSYNCPOL_ACTIVE_HIGH = 0x2, + HDMI_A_VIDPOLCFG_HSYNCPOL_ACTIVE_LOW = 0x0, +}; + +#endif /* __MXC_HDMI_H__ */ diff --git a/arch/arm/include/asm/arch-tegra20/spl.h b/arch/arm/include/asm/arch-tegra20/spl.h new file mode 100644 index 0000000..5e453c5 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/spl.h @@ -0,0 +1,28 @@ +/* + * (C) Copyright 2012 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _ASM_ARCH_SPL_H_ +#define _ASM_ARCH_SPL_H_ + +#define BOOT_DEVICE_RAM 1 + +#endif diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index 4558f4f..c34bb76 100644 --- a/arch/arm/include/asm/imx-common/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h @@ -98,6 +98,7 @@ typedef u64 iomux_v3_cfg_t; #define MUX_CONFIG_SION (0x1 << 4) int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad); -int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count); +int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, + unsigned count); #endif /* __MACH_IOMUX_V3_H__*/ diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 89df4dc..78a7fac 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -267,3 +267,8 @@ struct meminfo { extern struct meminfo meminfo; #endif + +/* + * Board specified tags + */ +void setup_board_tags(struct tag **in_params); diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 37476cc..1bd2730 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -34,6 +34,7 @@ #include <libfdt.h> #include <fdt_support.h> #include <asm/bootm.h> +#include <linux/compiler.h> DECLARE_GLOBAL_DATA_PTR; @@ -269,6 +270,8 @@ static int create_fdt(bootm_headers_t *images) } #endif +__weak void setup_board_tags(struct tag **in_params) {} + /* Subcommand: PREP */ static void boot_prep_linux(bootm_headers_t *images) { @@ -310,6 +313,7 @@ static void boot_prep_linux(bootm_headers_t *images) setup_initrd_tag(gd->bd, images->rd_start, images->rd_end); #endif + setup_board_tags(¶ms); setup_end_tag(gd->bd); #else /* all tags */ printf("FDT and ATAGS support not compiled in - hanging\n"); diff --git a/board/8dtech/eco5pk/Makefile b/board/8dtech/eco5pk/Makefile new file mode 100644 index 0000000..befe60a --- /dev/null +++ b/board/8dtech/eco5pk/Makefile @@ -0,0 +1,43 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Adapted from ti/evm/Makefile +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := eco5pk.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend diff --git a/board/8dtech/eco5pk/eco5pk.c b/board/8dtech/eco5pk/eco5pk.c new file mode 100644 index 0000000..cdb5b6f --- /dev/null +++ b/board/8dtech/eco5pk/eco5pk.c @@ -0,0 +1,61 @@ +/* + * eco5pk.c - board file for 8D Technology's AM3517 based eco5pk board + * + * Based on am3517evm.c + * + * Copyright (C) 2011-2012 8D Technologies inc. + * Copyright (C) 2009 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <common.h> +#include <netdev.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/emac_defs.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <crc.h> +#include <asm/mach-types.h> +#include "eco5pk.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + gpio_request(30, "RESOUT"); + gpio_direction_output(30, 1); + return 0; +} + +/* + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + */ +void set_muxconf_regs(void) +{ + MUX_ECO5_PK(); +} diff --git a/board/8dtech/eco5pk/eco5pk.h b/board/8dtech/eco5pk/eco5pk.h new file mode 100644 index 0000000..d289e2b --- /dev/null +++ b/board/8dtech/eco5pk/eco5pk.h @@ -0,0 +1,404 @@ +/* + * eco5.h - Header file for the 8D Technologies ECO5 board. + * + * Based on am3517evm.h + * Based on ti/evm/evm.h + * + * Copyright (C) 2011 8D Technologies inc. + * Copyright (C) 2009 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ECO5PK_H__ +#define _ECO5PK_H__ + +const omap3_sysinfo sysinfo = { + DDR_DISCRETE, + "ECO5 Board", + "NAND", +}; + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_ECO5_PK() \ + /* SDRC */\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_CKE0), (M0)) \ + MUX_VAL(CP(SDRC_CKE1), (M0)) \ + MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0)) \ + /* GPMC */\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M3)) \ + MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | DIS | M4)) \ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) \ + /* - ETH_nRESET*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) \ + /* DSS */\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA0), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA1), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA2), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA3), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA4), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA5), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA6), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA7), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | EN | M4)) \ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | EN | M4)) \ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | EN | M4)) \ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \ + /* CAMERA */\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ + /* - CAM_RESET*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) \ + /* MMC */\ + MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \ + \ + MUX_VAL(CP(MMC2_CLK), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(MMC2_CMD), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTD | DIS | M0)) \ + /* McBSP */\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /* LED ACT */ \ + \ + MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_152*/\ + /* - LCD_INI*/\ + MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) /*GPIO_153*/\ + /* - LCD_ENVDD */\ + MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M4)) /*GPIO_154*/\ + /* - LCD_QVGA/nVGA */\ + MUX_VAL(CP(MCBSP4_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_155*/\ + /* - LCD_RESB */\ + /* UART */\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) \ + \ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) \ + /* I2C */\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \ + /* McSPI */\ + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)) /*GPIO_175*/\ + MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176*/\ + /* - LAN_INTR*/\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)) \ + \ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \ + /* LCD_EN_BACKLIGHT */\ + MUX_VAL(CP(MCSPI2_CS1), (IDIS | PTD | EN | M4)) \ + /* CCDC */\ + MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M1)) \ + MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M1)) \ + MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M0)) \ + /* RMII */\ + MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \ + MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \ + MUX_VAL(CP(RMII_RXD0) , (IEN | PTD | M0)) \ + MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \ + MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \ + MUX_VAL(CP(RMII_RXER), (PTD | M0)) \ + MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \ + MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \ + MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \ + MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \ + /* HECC */\ + MUX_VAL(CP(HECC1_TXD), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(HECC1_RXD), (IEN | PTU | EN | M0)) \ + /* HSUSB */\ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)) \ + /* HDQ */\ + MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)) \ + /* Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) \ + /* SYS_nRESWARM */\ + MUX_VAL(CP(SYS_NRESWARM), (IDIS | PTU | DIS | M4)) \ + /* - GPIO30 */\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /* GPIO_2 */\ + /* - PEN_IRQ */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /* GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /* GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /* GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /* GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /* GPIO_8 */\ + /* - VIO_1V8*/\ + MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \ + \ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \ + /* JTAG */\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) \ + /* ETK (ES2 onwards) */\ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)) \ + /* Die to Die */\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) + +#endif diff --git a/board/CarMediaLab/flea3/lowlevel_init.S b/board/CarMediaLab/flea3/lowlevel_init.S index 2f42fc9..57fb1b1 100644 --- a/board/CarMediaLab/flea3/lowlevel_init.S +++ b/board/CarMediaLab/flea3/lowlevel_init.S @@ -22,47 +22,6 @@ */ #include <config.h> -#include <asm-offsets.h> -#include <asm/arch/imx-regs.h> -#include <generated/asm-offsets.h> - -/* - * Configuration for the flea3 board. - * These defines are used by the included macros and must - * be defined first - */ -#define AIPS_MPR_CONFIG 0x77777777 -#define AIPS_OPACR_CONFIG 0x00000000 - -/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ -#define MAX_MPR_CONFIG 0x00302154 - -/* SGPCR - always park on last master */ -#define MAX_SGPCR_CONFIG 0x00000010 - -/* MGPCR - restore default values */ -#define MAX_MGPCR_CONFIG 0x00000000 - -/* - * M3IF Control Register (M3IFCTL) - * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 - * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 - * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 - * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 - * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 - * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 - * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 - * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 - * ------------ - * 0x00000040 - */ -#define M3IF_CONFIG 0x00000040 - -#define CCM_PDR0_CONFIG 0x00801000 - -/* - * includes MX35 utility macros - */ #include <asm/arch/lowlevel_macro.S> .globl lowlevel_init diff --git a/board/avionic-design/medcom-wide/Makefile b/board/avionic-design/medcom-wide/Makefile index 864bc0e..e8c1e8b 100644 --- a/board/avionic-design/medcom-wide/Makefile +++ b/board/avionic-design/medcom-wide/Makefile @@ -29,9 +29,11 @@ $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) LIB = $(obj)lib$(BOARD).o -COBJS := ../../nvidia/common/board.o -COBJS += ../common/tamonten.o +COBJS-y := ../common/tamonten.o +include ../../nvidia/common/common.mk + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/avionic-design/plutux/Makefile b/board/avionic-design/plutux/Makefile index 864bc0e..e8c1e8b 100644 --- a/board/avionic-design/plutux/Makefile +++ b/board/avionic-design/plutux/Makefile @@ -29,9 +29,11 @@ $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) LIB = $(obj)lib$(BOARD).o -COBJS := ../../nvidia/common/board.o -COBJS += ../common/tamonten.o +COBJS-y := ../common/tamonten.o +include ../../nvidia/common/common.mk + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/avionic-design/tec/Makefile b/board/avionic-design/tec/Makefile index 864bc0e..e8c1e8b 100644 --- a/board/avionic-design/tec/Makefile +++ b/board/avionic-design/tec/Makefile @@ -29,9 +29,11 @@ $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) LIB = $(obj)lib$(BOARD).o -COBJS := ../../nvidia/common/board.o -COBJS += ../common/tamonten.o +COBJS-y := ../common/tamonten.o +include ../../nvidia/common/common.mk + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/compal/paz00/Makefile b/board/compal/paz00/Makefile index 7f7287e..fa5c510 100644 --- a/board/compal/paz00/Makefile +++ b/board/compal/paz00/Makefile @@ -20,9 +20,11 @@ $(shell mkdir -p $(obj)../../nvidia/common) LIB = $(obj)lib$(BOARD).o -COBJS := $(BOARD).o -COBJS += ../../nvidia/common/board.o +COBJS-y := $(BOARD).o +include ../../nvidia/common/common.mk + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/compulab/trimslice/Makefile b/board/compulab/trimslice/Makefile index ff07879..cc844d2 100644 --- a/board/compulab/trimslice/Makefile +++ b/board/compulab/trimslice/Makefile @@ -28,9 +28,11 @@ $(shell mkdir -p $(obj)../../nvidia/common) LIB = $(obj)lib$(BOARD).o -COBJS := $(BOARD).o -COBJS += ../../nvidia/common/board.o +COBJS-y := $(BOARD).o +include ../../nvidia/common/common.mk + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esg/ima3-mx53/ima3-mx53.c b/board/esg/ima3-mx53/ima3-mx53.c index e947330..41d6bb6 100644 --- a/board/esg/ima3-mx53/ima3-mx53.c +++ b/board/esg/ima3-mx53/ima3-mx53.c @@ -217,6 +217,7 @@ int board_mmc_init(bd_t *bis) PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); return fsl_esdhc_initialize(bis, &esdhc_cfg); } #endif diff --git a/board/freescale/mx35pdk/lowlevel_init.S b/board/freescale/mx35pdk/lowlevel_init.S index 698c4cf..75bb958 100644 --- a/board/freescale/mx35pdk/lowlevel_init.S +++ b/board/freescale/mx35pdk/lowlevel_init.S @@ -23,6 +23,7 @@ #include <asm/arch/imx-regs.h> #include <generated/asm-offsets.h> #include "mx35pdk.h" +#include <asm/arch/lowlevel_macro.S> /* * return soc version @@ -40,91 +41,6 @@ addne \ret, \ret, #0x10 .endm -/* - * AIPS setup - Only setup MPROTx registers. - * The PACR default values are good. - */ -.macro init_aips - /* - * Set all MPROTx to be non-bufferable, trusted for R/W, - * not forced to user-mode. - */ - ldr r0, =AIPS1_BASE_ADDR - ldr r1, =AIPS_MPR_CONFIG - str r1, [r0, #0x00] - str r1, [r0, #0x04] - ldr r0, =AIPS2_BASE_ADDR - str r1, [r0, #0x00] - str r1, [r0, #0x04] - - /* - * Clear the on and off peripheral modules Supervisor Protect bit - * for SDMA to access them. Did not change the AIPS control registers - * (offset 0x20) access type - */ - ldr r0, =AIPS1_BASE_ADDR - ldr r1, =AIPS_OPACR_CONFIG - str r1, [r0, #0x40] - str r1, [r0, #0x44] - str r1, [r0, #0x48] - str r1, [r0, #0x4C] - str r1, [r0, #0x50] - ldr r0, =AIPS2_BASE_ADDR - str r1, [r0, #0x40] - str r1, [r0, #0x44] - str r1, [r0, #0x48] - str r1, [r0, #0x4C] - str r1, [r0, #0x50] -.endm - -/* MAX (Multi-Layer AHB Crossbar Switch) setup */ -.macro init_max - ldr r0, =MAX_BASE_ADDR - /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ - ldr r1, =MAX_MPR_CONFIG - str r1, [r0, #0x000] /* for S0 */ - str r1, [r0, #0x100] /* for S1 */ - str r1, [r0, #0x200] /* for S2 */ - str r1, [r0, #0x300] /* for S3 */ - str r1, [r0, #0x400] /* for S4 */ - /* SGPCR - always park on last master */ - ldr r1, =MAX_SGPCR_CONFIG - str r1, [r0, #0x010] /* for S0 */ - str r1, [r0, #0x110] /* for S1 */ - str r1, [r0, #0x210] /* for S2 */ - str r1, [r0, #0x310] /* for S3 */ - str r1, [r0, #0x410] /* for S4 */ - /* MGPCR - restore default values */ - ldr r1, =MAX_MGPCR_CONFIG - str r1, [r0, #0x800] /* for M0 */ - str r1, [r0, #0x900] /* for M1 */ - str r1, [r0, #0xA00] /* for M2 */ - str r1, [r0, #0xB00] /* for M3 */ - str r1, [r0, #0xC00] /* for M4 */ - str r1, [r0, #0xD00] /* for M5 */ -.endm - -/* M3IF setup */ -.macro init_m3if - /* Configure M3IF registers */ - ldr r1, =M3IF_BASE_ADDR - /* - * M3IF Control Register (M3IFCTL) - * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 - * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 - * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 - * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 - * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 - * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 - * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 - * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 - * ------------ - * 0x00000040 - */ - ldr r0, =M3IF_CONFIG - str r0, [r1] /* M3IF control reg */ -.endm - /* CPLD on CS5 setup */ .macro init_debug_board ldr r0, =DBG_BASE_ADDR @@ -210,38 +126,7 @@ lowlevel_init: mov r10, lr - mrc 15, 0, r1, c1, c0, 0 - - mrc 15, 0, r0, c1, c0, 1 - orr r0, r0, #7 - mcr 15, 0, r0, c1, c0, 1 - orr r1, r1, #(1<<11) - - /* Set unaligned access enable */ - orr r1, r1, #(1<<22) - - /* Set low int latency enable */ - orr r1, r1, #(1<<21) - - mcr 15, 0, r1, c1, c0, 0 - - mov r0, #0 - - /* Set branch prediction enable */ - mcr 15, 0, r0, c15, c2, 4 - - mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */ - mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */ - mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */ - - /* - * initializes very early AIPS - * Then it also initializes Multi-Layer AHB Crossbar Switch, - * M3IF - * Also setup the Peripheral Port Remap register inside the core - */ - ldr r0, =0x40000015 /* start from AIPS 2GB region */ - mcr p15, 0, r0, c15, c2, 4 + core_init init_aips diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c index 7cb6b30..a12531f 100644 --- a/board/freescale/mx35pdk/mx35pdk.c +++ b/board/freescale/mx35pdk/mx35pdk.c @@ -27,6 +27,7 @@ #include <asm/errno.h> #include <asm/arch/imx-regs.h> #include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> #include <asm/arch/mx35_pins.h> #include <asm/arch/iomux.h> #include <i2c.h> @@ -292,6 +293,7 @@ int board_mmc_init(bd_t *bis) mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC); mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC); + esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); return fsl_esdhc_initialize(bis, &esdhc_cfg); } diff --git a/board/freescale/mx35pdk/mx35pdk.h b/board/freescale/mx35pdk/mx35pdk.h index 6aeb218..f15aa4f 100644 --- a/board/freescale/mx35pdk/mx35pdk.h +++ b/board/freescale/mx35pdk/mx35pdk.h @@ -26,31 +26,6 @@ #ifndef __BOARD_MX35_3STACK_H #define __BOARD_MX35_3STACK_H -#define AIPS_MPR_CONFIG 0x77777777 -#define AIPS_OPACR_CONFIG 0x00000000 - -/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ -#define MAX_MPR_CONFIG 0x00302154 -/* SGPCR - always park on last master */ -#define MAX_SGPCR_CONFIG 0x00000010 -/* MGPCR - restore default values */ -#define MAX_MGPCR_CONFIG 0x00000000 - -/* - * M3IF Control Register (M3IFCTL) - * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 - * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 - * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 - * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 - * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 - * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 - * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 - * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 - * ------------ - * 0x00000040 - */ -#define M3IF_CONFIG 0x00000040 - #define DBG_BASE_ADDR WEIM_CTRL_CS5 #define DBG_CSCR_U_CONFIG 0x0000D843 #define DBG_CSCR_L_CONFIG 0x22252521 diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index a94701c..421d8c2 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -29,6 +29,7 @@ #include <asm/errno.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> #include <i2c.h> #include <mmc.h> #include <fsl_esdhc.h> @@ -358,6 +359,9 @@ int board_mmc_init(bd_t *bis) u32 index; s32 status = 0; + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { switch (index) { @@ -467,7 +471,7 @@ int board_mmc_init(bd_t *bis) } #endif -static struct fb_videomode claa_wvga = { +static struct fb_videomode const claa_wvga = { .name = "CLAA07LC0ACW", .refresh = 57, .xres = 800, diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c index 08c7795..2fc8570 100644 --- a/board/freescale/mx53ard/mx53ard.c +++ b/board/freescale/mx53ard/mx53ard.c @@ -26,6 +26,7 @@ #include <asm/arch/mx5x_pins.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> #include <asm/arch/iomux.h> #include <asm/errno.h> #include <netdev.h> @@ -106,6 +107,9 @@ int board_mmc_init(bd_t *bis) u32 index; s32 status = 0; + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { switch (index) { case 0: diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c index b11a94c..bb4621d 100644 --- a/board/freescale/mx53evk/mx53evk.c +++ b/board/freescale/mx53evk/mx53evk.c @@ -26,6 +26,7 @@ #include <asm/arch/mx5x_pins.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> #include <asm/arch/iomux.h> #include <asm/errno.h> #include <asm/imx-common/boot_mode.h> @@ -232,6 +233,9 @@ int board_mmc_init(bd_t *bis) u32 index; s32 status = 0; + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { switch (index) { case 0: diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 6543209..a11e883 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -192,6 +192,9 @@ int board_mmc_init(bd_t *bis) u32 index; s32 status = 0; + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { switch (index) { case 0: @@ -409,7 +412,7 @@ static void clock_1GHz(void) printf("CPU: Switch DDR clock to 400MHz failed\n"); } -static struct fb_videomode claa_wvga = { +static struct fb_videomode const claa_wvga = { .name = "CLAA07LC0ACW", .refresh = 57, .xres = 800, diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c index 7f35ddd..761f727 100644 --- a/board/freescale/mx53smd/mx53smd.c +++ b/board/freescale/mx53smd/mx53smd.c @@ -26,6 +26,7 @@ #include <asm/arch/mx5x_pins.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> #include <asm/arch/iomux.h> #include <asm/errno.h> #include <netdev.h> @@ -144,6 +145,8 @@ int board_mmc_init(bd_t *bis) u32 index; s32 status = 0; + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { switch (index) { case 0: diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c index d43b327..ee20d4f 100644 --- a/board/freescale/mx6qarm2/mx6qarm2.c +++ b/board/freescale/mx6qarm2/mx6qarm2.c @@ -24,6 +24,7 @@ #include <asm/io.h> #include <asm/arch/imx-regs.h> #include <asm/arch/mx6x_pins.h> +#include <asm/arch/clock.h> #include <asm/errno.h> #include <asm/gpio.h> #include <asm/imx-common/iomux-v3.h> @@ -53,12 +54,12 @@ int dram_init(void) return 0; } -iomux_v3_cfg_t uart4_pads[] = { +iomux_v3_cfg_t const uart4_pads[] = { MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; -iomux_v3_cfg_t usdhc3_pads[] = { +iomux_v3_cfg_t const usdhc3_pads[] = { MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -72,7 +73,7 @@ iomux_v3_cfg_t usdhc3_pads[] = { MX6Q_PAD_NANDF_CS0__GPIO_6_11 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; -iomux_v3_cfg_t usdhc4_pads[] = { +iomux_v3_cfg_t const usdhc4_pads[] = { MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -85,7 +86,7 @@ iomux_v3_cfg_t usdhc4_pads[] = { MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; -iomux_v3_cfg_t enet_pads[] = { +iomux_v3_cfg_t const enet_pads[] = { MX6Q_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -139,6 +140,9 @@ int board_mmc_init(bd_t *bis) s32 status = 0; u32 index = 0; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); + for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { switch (index) { case 0: diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index fcd83dc..9e3700e 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -30,6 +30,8 @@ #include <fsl_esdhc.h> #include <miiphy.h> #include <netdev.h> +#include <asm/arch/sys_proto.h> + DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ @@ -51,12 +53,12 @@ int dram_init(void) return 0; } -iomux_v3_cfg_t uart4_pads[] = { +iomux_v3_cfg_t const uart4_pads[] = { MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; -iomux_v3_cfg_t enet_pads[] = { +iomux_v3_cfg_t const enet_pads[] = { MX6Q_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -79,7 +81,7 @@ static void setup_iomux_enet(void) imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); } -iomux_v3_cfg_t usdhc3_pads[] = { +iomux_v3_cfg_t const usdhc3_pads[] = { MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -114,6 +116,7 @@ int board_mmc_init(bd_t *bis) { imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); } #endif @@ -164,9 +167,38 @@ int board_eth_init(bd_t *bis) return 0; } +#define BOARD_REV_B 0x200 +#define BOARD_REV_A 0x100 + +static int mx6sabre_rev(void) +{ + /* + * Get Board ID information from OCOTP_GP1[15:8] + * i.MX6Q ARD RevA: 0x01 + * i.MX6Q ARD RevB: 0x02 + */ + struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; + int reg = readl(&ocotp->gp1); + int ret; + + switch (reg >> 8 & 0x0F) { + case 0x02: + ret = BOARD_REV_B; + break; + case 0x01: + default: + ret = BOARD_REV_A; + break; + } + + return ret; +} + u32 get_board_rev(void) { - return 0x63000; + int rev = mx6sabre_rev(); + + return (get_cpu_rev() & ~(0xF << 8)) | rev; } int board_early_init_f(void) @@ -186,7 +218,20 @@ int board_init(void) int checkboard(void) { - puts("Board: MX6Q-Sabreauto\n"); + int rev = mx6sabre_rev(); + char *revname; + + switch (rev) { + case BOARD_REV_B: + revname = "B"; + break; + case BOARD_REV_A: + default: + revname = "A"; + break; + } + + printf("Board: MX6Q-Sabreauto rev%s\n", revname); return 0; } diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 4b4e89b..af6f917 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -36,6 +36,12 @@ #include <micrel.h> #include <miiphy.h> #include <netdev.h> +#include <linux/fb.h> +#include <ipu_pixfmt.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/mxc_hdmi.h> +#include <i2c.h> + DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ @@ -70,12 +76,12 @@ int dram_init(void) return 0; } -iomux_v3_cfg_t uart1_pads[] = { +iomux_v3_cfg_t const uart1_pads[] = { MX6Q_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), MX6Q_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; -iomux_v3_cfg_t uart2_pads[] = { +iomux_v3_cfg_t const uart2_pads[] = { MX6Q_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), MX6Q_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; @@ -124,7 +130,7 @@ struct i2c_pads_info i2c_pad_info2 = { } }; -iomux_v3_cfg_t usdhc3_pads[] = { +iomux_v3_cfg_t const usdhc3_pads[] = { MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -134,7 +140,7 @@ iomux_v3_cfg_t usdhc3_pads[] = { MX6Q_PAD_SD3_DAT5__GPIO_7_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; -iomux_v3_cfg_t usdhc4_pads[] = { +iomux_v3_cfg_t const usdhc4_pads[] = { MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -144,7 +150,7 @@ iomux_v3_cfg_t usdhc4_pads[] = { MX6Q_PAD_NANDF_D6__GPIO_2_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; -iomux_v3_cfg_t enet_pads1[] = { +iomux_v3_cfg_t const enet_pads1[] = { MX6Q_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -170,7 +176,7 @@ iomux_v3_cfg_t enet_pads1[] = { MX6Q_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL), }; -iomux_v3_cfg_t enet_pads2[] = { +iomux_v3_cfg_t const enet_pads2[] = { MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -180,7 +186,7 @@ iomux_v3_cfg_t enet_pads2[] = { }; /* Button assignments for J14 */ -static iomux_v3_cfg_t button_pads[] = { +static iomux_v3_cfg_t const button_pads[] = { /* Menu */ MX6Q_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), /* Back */ @@ -213,7 +219,7 @@ static void setup_iomux_enet(void) imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); } -iomux_v3_cfg_t usb_pads[] = { +iomux_v3_cfg_t const usb_pads[] = { MX6Q_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL), }; @@ -264,6 +270,9 @@ int board_mmc_init(bd_t *bis) s32 status = 0; u32 index = 0; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); + for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { switch (index) { case 0: @@ -294,7 +303,7 @@ u32 get_board_rev(void) } #ifdef CONFIG_MXC_SPI -iomux_v3_cfg_t ecspi1_pads[] = { +iomux_v3_cfg_t const ecspi1_pads[] = { /* SS1 */ MX6Q_PAD_EIM_D19__GPIO_3_19 | MUX_PAD_CTRL(SPI_PAD_CTRL), MX6Q_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), @@ -372,14 +381,337 @@ int setup_sata(void) } #endif +#if defined(CONFIG_VIDEO_IPUV3) + +static iomux_v3_cfg_t const backlight_pads[] = { + /* Backlight on RGB connector: J15 */ + MX6Q_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL), +#define RGB_BACKLIGHT_GP IMX_GPIO_NR(1, 21) + + /* Backlight on LVDS connector: J6 */ + MX6Q_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL), +#define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 18) +}; + +static iomux_v3_cfg_t const rgb_pads[] = { + MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, + MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15, + MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2, + MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3, + MX6Q_PAD_DI0_PIN4__GPIO_4_20, + MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0, + MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1, + MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2, + MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3, + MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4, + MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5, + MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6, + MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7, + MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8, + MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9, + MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10, + MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11, + MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12, + MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13, + MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14, + MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15, + MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16, + MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17, + MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18, + MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19, + MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20, + MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21, + MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22, + MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23, +}; + +struct display_info_t { + int bus; + int addr; + int pixfmt; + int (*detect)(struct display_info_t const *dev); + void (*enable)(struct display_info_t const *dev); + struct fb_videomode mode; +}; + + +static int detect_hdmi(struct display_info_t const *dev) +{ + return __raw_readb(HDMI_ARB_BASE_ADDR+HDMI_PHY_STAT0) & HDMI_PHY_HPD; +} + +static void enable_hdmi(struct display_info_t const *dev) +{ + u8 reg; + printf("%s: setup HDMI monitor\n", __func__); + reg = __raw_readb( + HDMI_ARB_BASE_ADDR + +HDMI_PHY_CONF0); + reg |= HDMI_PHY_CONF0_PDZ_MASK; + __raw_writeb(reg, + HDMI_ARB_BASE_ADDR + +HDMI_PHY_CONF0); + udelay(3000); + reg |= HDMI_PHY_CONF0_ENTMDS_MASK; + __raw_writeb(reg, + HDMI_ARB_BASE_ADDR + +HDMI_PHY_CONF0); + udelay(3000); + reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK; + __raw_writeb(reg, + HDMI_ARB_BASE_ADDR + +HDMI_PHY_CONF0); + __raw_writeb(HDMI_MC_PHYRSTZ_ASSERT, + HDMI_ARB_BASE_ADDR+HDMI_MC_PHYRSTZ); +} + +static int detect_i2c(struct display_info_t const *dev) +{ + return ((0 == i2c_set_bus_num(dev->bus)) + && + (0 == i2c_probe(dev->addr))); +} + +static void enable_lvds(struct display_info_t const *dev) +{ + struct iomuxc *iomux = (struct iomuxc *) + IOMUXC_BASE_ADDR; + u32 reg = readl(&iomux->gpr[2]); + reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT; + writel(reg, &iomux->gpr[2]); + gpio_direction_output(LVDS_BACKLIGHT_GP, 1); +} + +static void enable_rgb(struct display_info_t const *dev) +{ + imx_iomux_v3_setup_multiple_pads( + rgb_pads, + ARRAY_SIZE(rgb_pads)); + gpio_direction_output(RGB_BACKLIGHT_GP, 1); +} + +static struct display_info_t const displays[] = {{ + .bus = -1, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = detect_hdmi, + .enable = enable_hdmi, + .mode = { + .name = "HDMI", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, + .addr = 0x4, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = detect_i2c, + .enable = enable_lvds, + .mode = { + .name = "Hannstar-XGA", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, + .addr = 0x38, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = detect_i2c, + .enable = enable_lvds, + .mode = { + .name = "wsvga-lvds", + .refresh = 60, + .xres = 1024, + .yres = 600, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, + .addr = 0x48, + .pixfmt = IPU_PIX_FMT_RGB666, + .detect = detect_i2c, + .enable = enable_rgb, + .mode = { + .name = "wvga-rgb", + .refresh = 57, + .xres = 800, + .yres = 480, + .pixclock = 37037, + .left_margin = 40, + .right_margin = 60, + .upper_margin = 10, + .lower_margin = 10, + .hsync_len = 20, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +} } }; + +int board_video_skip(void) +{ + int i; + int ret; + char const *panel = getenv("panel"); + if (!panel) { + for (i = 0; i < ARRAY_SIZE(displays); i++) { + struct display_info_t const *dev = displays+i; + if (dev->detect(dev)) { + panel = dev->mode.name; + printf("auto-detected panel %s\n", panel); + break; + } + } + if (!panel) { + panel = displays[0].mode.name; + printf("No panel detected: default to %s\n", panel); + } + } else { + for (i = 0; i < ARRAY_SIZE(displays); i++) { + if (!strcmp(panel, displays[i].mode.name)) + break; + } + } + if (i < ARRAY_SIZE(displays)) { + ret = ipuv3_fb_init(&displays[i].mode, 0, + displays[i].pixfmt); + if (!ret) { + displays[i].enable(displays+i); + printf("Display: %s (%ux%u)\n", + displays[i].mode.name, + displays[i].mode.xres, + displays[i].mode.yres); + } else + printf("LCD %s cannot be configured: %d\n", + displays[i].mode.name, ret); + } else { + printf("unsupported panel %s\n", panel); + ret = -EINVAL; + } + return (0 != ret); +} + +static void setup_display(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + + int reg; + + /* Turn on LDB0,IPU,IPU DI0 clocks */ + reg = __raw_readl(&mxc_ccm->CCGR3); + reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET + |MXC_CCM_CCGR3_LDB_DI0_MASK; + writel(reg, &mxc_ccm->CCGR3); + + /* Turn on HDMI PHY clock */ + reg = __raw_readl(&mxc_ccm->CCGR2); + reg |= MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK + |MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK; + writel(reg, &mxc_ccm->CCGR2); + + /* clear HDMI PHY reset */ + __raw_writeb(HDMI_MC_PHYRSTZ_DEASSERT, + HDMI_ARB_BASE_ADDR+HDMI_MC_PHYRSTZ); + + /* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */ + writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr); + writel(0x13<<ANATOP_PFD_480_PFD1_FRAC_SHIFT, &anatop->pfd_480_set); + + /* set LDB0, LDB1 clk select to 011/011 */ + reg = readl(&mxc_ccm->cs2cdr); + reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK + |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK); + reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) + |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET); + writel(reg, &mxc_ccm->cs2cdr); + + reg = readl(&mxc_ccm->cscmr2); + reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV; + writel(reg, &mxc_ccm->cscmr2); + + reg = readl(&mxc_ccm->chsccdr); + reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK + |MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK + |MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK); + reg |= (CHSCCDR_CLK_SEL_LDB_DI0 + <<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET) + |(CHSCCDR_PODF_DIVIDE_BY_3 + <<MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET) + |(CHSCCDR_IPU_PRE_CLK_540M_PFD + <<MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET); + writel(reg, &mxc_ccm->chsccdr); + + reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES + |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH + |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW + |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG + |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT + |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG + |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT + |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED + |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0; + writel(reg, &iomux->gpr[2]); + + reg = readl(&iomux->gpr[3]); + reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK) + | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 + <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET); + writel(reg, &iomux->gpr[3]); + + /* backlights off until needed */ + imx_iomux_v3_setup_multiple_pads(backlight_pads, + ARRAY_SIZE(backlight_pads)); + gpio_direction_input(LVDS_BACKLIGHT_GP); + gpio_direction_input(RGB_BACKLIGHT_GP); +} +#endif + int board_early_init_f(void) { setup_iomux_uart(); setup_buttons(); +#if defined(CONFIG_VIDEO_IPUV3) + setup_display(); +#endif return 0; } +/* + * Do not overwrite the console + * Use always serial for U-Boot console + */ +int overwrite_console(void) +{ + return 1; +} + int board_init(void) { /* address of boot parameters */ diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c index 03a6857..0240fb5 100644 --- a/board/freescale/mx6qsabresd/mx6qsabresd.c +++ b/board/freescale/mx6qsabresd/mx6qsabresd.c @@ -51,12 +51,12 @@ int dram_init(void) return 0; } -iomux_v3_cfg_t uart1_pads[] = { +iomux_v3_cfg_t const uart1_pads[] = { MX6Q_PAD_CSI0_DAT10__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), MX6Q_PAD_CSI0_DAT11__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; -iomux_v3_cfg_t enet_pads[] = { +iomux_v3_cfg_t const enet_pads[] = { MX6Q_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -86,7 +86,7 @@ static void setup_iomux_enet(void) gpio_set_value(IMX_GPIO_NR(1, 25), 1); } -iomux_v3_cfg_t usdhc3_pads[] = { +iomux_v3_cfg_t const usdhc3_pads[] = { MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -120,6 +120,7 @@ int board_mmc_init(bd_t *bis) { imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); } #endif diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c index cfd2e93..c2b2823 100644 --- a/board/genesi/mx51_efikamx/efikamx.c +++ b/board/genesi/mx51_efikamx/efikamx.c @@ -29,6 +29,7 @@ #include <asm/errno.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> #include <i2c.h> #include <mmc.h> #include <fsl_esdhc.h> @@ -93,7 +94,7 @@ static u32 get_mx_rev(void) return (~rev & 0x7) + 1; } -static iomux_v3_cfg_t efikasb_revision_pads[] = { +static iomux_v3_cfg_t const efikasb_revision_pads[] = { MX51_PAD_EIM_CS3__GPIO2_28, MX51_PAD_EIM_CS4__GPIO2_29, }; @@ -140,7 +141,7 @@ int dram_init(void) /* * UART configuration */ -static iomux_v3_cfg_t efikamx_uart_pads[] = { +static iomux_v3_cfg_t const efikamx_uart_pads[] = { MX51_PAD_UART1_RXD__UART1_RXD, MX51_PAD_UART1_TXD__UART1_TXD, MX51_PAD_UART1_RTS__UART1_RTS, @@ -150,7 +151,7 @@ static iomux_v3_cfg_t efikamx_uart_pads[] = { /* * SPI configuration */ -static iomux_v3_cfg_t efikamx_spi_pads[] = { +static iomux_v3_cfg_t const efikamx_spi_pads[] = { MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, MX51_PAD_CSPI1_MISO__ECSPI1_MISO, MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, @@ -272,7 +273,7 @@ struct fsl_esdhc_cfg esdhc_cfg[2] = { {MMC_SDHC2_BASE_ADDR}, }; -static iomux_v3_cfg_t efikamx_sdhc1_pads[] = { +static iomux_v3_cfg_t const efikamx_sdhc1_pads[] = { MX51_PAD_SD1_CMD__SD1_CMD, MX51_PAD_SD1_CLK__SD1_CLK, MX51_PAD_SD1_DATA0__SD1_DATA0, @@ -284,7 +285,7 @@ static iomux_v3_cfg_t efikamx_sdhc1_pads[] = { #define EFIKAMX_SDHC1_WP IMX_GPIO_NR(1, 1) -static iomux_v3_cfg_t efikamx_sdhc1_cd_pads[] = { +static iomux_v3_cfg_t const efikamx_sdhc1_cd_pads[] = { MX51_PAD_GPIO1_0__SD1_CD, MX51_PAD_EIM_CS2__SD1_CD, }; @@ -292,7 +293,7 @@ static iomux_v3_cfg_t efikamx_sdhc1_cd_pads[] = { #define EFIKAMX_SDHC1_CD IMX_GPIO_NR(1, 0) #define EFIKASB_SDHC1_CD IMX_GPIO_NR(2, 27) -static iomux_v3_cfg_t efikasb_sdhc2_pads[] = { +static iomux_v3_cfg_t const efikasb_sdhc2_pads[] = { MX51_PAD_SD2_CMD__SD2_CMD, MX51_PAD_SD2_CLK__SD2_CLK, MX51_PAD_SD2_DATA0__SD2_DATA0, @@ -349,6 +350,9 @@ int board_mmc_init(bd_t *bis) gpio_direction_input(EFIKASB_SDHC1_CD); } + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]); if (machine_is_efikasb()) { @@ -368,7 +372,7 @@ int board_mmc_init(bd_t *bis) /* * PATA */ -static iomux_v3_cfg_t efikamx_pata_pads[] = { +static iomux_v3_cfg_t const efikamx_pata_pads[] = { MX51_PAD_NANDF_WE_B__PATA_DIOW, MX51_PAD_NANDF_RE_B__PATA_DIOR, MX51_PAD_NANDF_ALE__PATA_BUFFER_EN, @@ -419,7 +423,7 @@ static inline void setup_iomux_usb(void) { } #define EFIKAMX_LED_GREEN IMX_GPIO_NR(3, 14) #define EFIKAMX_LED_RED IMX_GPIO_NR(3, 15) -static iomux_v3_cfg_t efikasb_led_pads[] = { +static iomux_v3_cfg_t const efikasb_led_pads[] = { MX51_PAD_GPIO1_3__GPIO1_3, MX51_PAD_EIM_CS0__GPIO2_25, }; diff --git a/board/nokia/rx51/Makefile b/board/nokia/rx51/Makefile new file mode 100644 index 0000000..86fb48c --- /dev/null +++ b/board/nokia/rx51/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y := $(BOARD).o +SOBJS-y := lowlevel_init.o + +COBJS := $(sort $(COBJS-y)) +SOBJS := $(sort $(SOBJS-y)) +SRCS := $(COBJS:.o=.c) $(SOBJS:.o=.S) +OBJS := $(addprefix $(obj),$(COBJS)) $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/nokia/rx51/lowlevel_init.S b/board/nokia/rx51/lowlevel_init.S new file mode 100644 index 0000000..055b103 --- /dev/null +++ b/board/nokia/rx51/lowlevel_init.S @@ -0,0 +1,209 @@ +/* + * (C) Copyright 2011-2012 + * Pali Rohár <pali.rohar@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + +relocaddr: /* address of this relocaddr section after coping */ + .word . /* address of section (calculated at compile time) */ + +startaddr: /* address of u-boot after copying */ + .word CONFIG_SYS_TEXT_BASE + +kernaddr: /* address of kernel after copying */ + .word KERNEL_ADDRESS + +kernsize: /* maximal size of kernel image */ + .word KERNEL_MAXSIZE + +kernoffs: /* offset of kernel image in loaded u-boot */ + .word KERNEL_OFFSET + +imagesize: /* maximal size of image */ + .word IMAGE_MAXSIZE + +ih_magic: /* IH_MAGIC in big endian from include/image.h */ + .word 0x56190527 + +/* + * Routine: save_boot_params (called after reset from start.S) + * Description: Copy attached kernel to address KERNEL_ADDRESS + * Copy u-boot to address CONFIG_SYS_TEXT_BASE + * Return to copied u-boot address + */ + +.global save_boot_params +save_boot_params: + + +/* Copy valid attached kernel to address KERNEL_ADDRESS */ + +copy_kernel_start: + adr r0, relocaddr /* r0 - address of section relocaddr */ + ldr r1, relocaddr /* r1 - address of relocaddr after relocation */ + cmp r0, r1 + + /* r4 - calculated offset */ + subhi r4, r0, r1 + sublo r4, r1, r0 + + /* r0 - start of kernel before */ + ldr r0, startaddr + addhi r0, r0, r4 + sublo r0, r0, r4 + ldr r1, kernoffs + add r0, r0, r1 + + /* r3 - start of kernel after */ + ldr r3, kernaddr + + /* r2 - end of kernel after */ + ldr r1, kernsize + add r2, r3, r1 + + /* r1 - end of kernel before */ + add r1, r0, r1 + + /* remove header in target kernel */ + mov r5, #0 + str r5, [r3] + + /* check for valid kernel uImage */ + ldr r4, [r0] /* r4 - 4 bytes header of kernel */ + ldr r5, ih_magic /* r5 - IH_MAGIC */ + cmp r4, r5 + bne copy_kernel_end /* skip if invalid image */ + +copy_kernel_loop: + ldmdb r1!, {r3 - r10} + stmdb r2!, {r3 - r10} + cmp r1, r0 + bhi copy_kernel_loop + +copy_kernel_end: + mov r5, #0 + str r5, [r0] /* remove 4 bytes header of kernel */ + + +/* Fix u-boot code */ + +fix_start: + adr r0, relocaddr /* r0 - address of section relocaddr */ + ldr r1, relocaddr /* r1 - address of relocaddr after relocation */ + cmp r0, r1 + + beq copy_uboot_end /* skip if u-boot is on correct address */ + + /* r5 - calculated offset */ + subhi r5, r0, r1 + sublo r5, r1, r0 + + /* r6 - maximal u-boot size */ + ldr r6, imagesize + + /* fix return address */ + subhi lr, lr, r5 + addlo lr, lr, r5 + + /* r1 - start of u-boot after */ + ldr r1, startaddr + + /* r0 - start of u-boot before */ + addhi r0, r1, r5 + sublo r0, r1, r5 + + /* check if we need to move uboot copy code before calling it */ + cmp r5, r6 + bhi copy_uboot_start /* now coping u-boot code directly is safe */ + + +copy_code_start: + /* r0 - start of u-boot before */ + /* r1 - start of u-boot after */ + /* r6 - maximal u-boot size */ + + /* r7 - maximal kernel size */ + ldr r7, kernsize + + /* r4 - end of kernel before */ + add r4, r0, r6 + add r4, r4, r7 + + /* r5 - end of u-boot after */ + ldr r5, startaddr + add r5, r5, r6 + + /* r2 - start of loop code after */ + cmp r4, r5 /* higher address (r4 or r5) */ + movhs r2, r4 + movlo r2, r5 + + /* r3 - end of loop code before */ + adr r3, end + + /* r4 - end of loop code after */ + adr r4, copy_uboot_start + sub r4, r3, r4 + add r4, r2, r4 + +copy_code_loop: + ldmdb r3!, {r7 - r10} + stmdb r4!, {r7 - r10} + cmp r4, r2 + bhi copy_code_loop + +copy_code_end: + mov pc, r2 + + +/* Copy u-boot to address CONFIG_SYS_TEXT_BASE */ + +copy_uboot_start: + /* r0 - start of u-boot before */ + /* r1 - start of u-boot after */ + /* r6 - maximal u-boot size */ + + /* r2 - end of u-boot after */ + add r2, r1, r6 + + /* condition for copying from left to right */ + cmp r0, r1 + addlo r1, r0, r6 /* r1 - end of u-boot before */ + blo copy_uboot_loop_right + +copy_uboot_loop_left: + ldmia r0!, {r3 - r10} + stmia r1!, {r3 - r10} + cmp r1, r2 + blo copy_uboot_loop_left + b copy_uboot_end + +copy_uboot_loop_right: + ldmdb r1!, {r3 - r10} + stmdb r2!, {r3 - r10} + cmp r1, r0 + bhi copy_uboot_loop_right + +copy_uboot_end: + bx lr + +end: diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c new file mode 100644 index 0000000..b2fe1c5 --- /dev/null +++ b/board/nokia/rx51/rx51.c @@ -0,0 +1,677 @@ +/* + * (C) Copyright 2012 + * Ивайло Димитров <freemangordon@abv.bg> + * + * (C) Copyright 2011-2012 + * Pali Rohár <pali.rohar@gmail.com> + * + * (C) Copyright 2010 + * Alistair Buxton <a.j.buxton@gmail.com> + * + * Derived from Beagle Board and 3430 SDP code: + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Sunil Kumar <sunilsaini05@gmail.com> + * Shashi Ranjan <shashiranjanmca05@gmail.com> + * + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <watchdog.h> +#include <malloc.h> +#include <twl4030.h> +#include <i2c.h> +#include <video_fb.h> +#include <asm/io.h> +#include <asm/setup.h> +#include <asm/bitops.h> +#include <asm/mach-types.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mmc_host_def.h> + +#include "rx51.h" +#include "tag_omap.h" + +DECLARE_GLOBAL_DATA_PTR; + +GraphicDevice gdev; + +const omap3_sysinfo sysinfo = { + DDR_STACKED, + "Nokia RX-51", + "OneNAND" +}; + +/* This structure contains default omap tags needed for booting Maemo 5 */ +static struct tag_omap omap[] = { + OMAP_TAG_UART_CONFIG(0x04), + OMAP_TAG_SERIAL_CONSOLE_CONFIG(0x03, 0x01C200), + OMAP_TAG_LCD_CONFIG("acx565akm", "internal", 90, 0x18), + OMAP_TAG_GPIO_SWITCH_CONFIG("cam_focus", 0x44, 0x1, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cam_launch", 0x45, 0x1, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cam_shutter", 0x6e, 0x1, 0x0, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_apeslpx", 0x46, 0x2, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_bsi", 0x9d, 0x2, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_en", 0x4a, 0x2, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst", 0x4b, 0x6, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst_rq", 0x49, 0x6, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_wddis", 0x0d, 0x2, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("headphone", 0xb1, 0x1, 0x1, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("kb_lock", 0x71, 0x1, 0x0, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("proximity", 0x59, 0x0, 0x0, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("sleep_ind", 0xa2, 0x2, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("slide", GPIO_SLIDE, 0x0, 0x0, 0x0), + OMAP_TAG_WLAN_CX3110X_CONFIG(0x25, 0xff, 87, 42, -1), + OMAP_TAG_PARTITION_CONFIG(PART1_NAME, PART1_SIZE * PART1_MULL, + PART1_OFFS, PART1_MASK), + OMAP_TAG_PARTITION_CONFIG(PART2_NAME, PART2_SIZE * PART2_MULL, + PART2_OFFS, PART2_MASK), + OMAP_TAG_PARTITION_CONFIG(PART3_NAME, PART3_SIZE * PART3_MULL, + PART3_OFFS, PART3_MASK), + OMAP_TAG_PARTITION_CONFIG(PART4_NAME, PART4_SIZE * PART4_MULL, + PART4_OFFS, PART4_MASK), + OMAP_TAG_PARTITION_CONFIG(PART5_NAME, PART5_SIZE * PART5_MULL, + PART5_OFFS, PART5_MASK), + OMAP_TAG_PARTITION_CONFIG(PART6_NAME, PART6_SIZE * PART6_MULL, + PART6_OFFS, PART6_MASK), + OMAP_TAG_BOOT_REASON_CONFIG("pwr_key"), + OMAP_TAG_VERSION_STR_CONFIG("product", "RX-51"), + OMAP_TAG_VERSION_STR_CONFIG("hw-build", "2101"), + OMAP_TAG_VERSION_STR_CONFIG("nolo", "1.4.14"), + OMAP_TAG_VERSION_STR_CONFIG("boot-mode", "normal"), + { } +}; + +static char *boot_reason_ptr; +static char *hw_build_ptr; +static char *nolo_version_ptr; +static char *boot_mode_ptr; + +/* + * Routine: init_omap_tags + * Description: Initialize pointers to values in tag_omap + */ +static void init_omap_tags(void) +{ + char *component; + char *version; + int i = 0; + while (omap[i].hdr.tag) { + switch (omap[i].hdr.tag) { + case OMAP_TAG_BOOT_REASON: + boot_reason_ptr = omap[i].u.boot_reason.reason_str; + break; + case OMAP_TAG_VERSION_STR: + component = omap[i].u.version.component; + version = omap[i].u.version.version; + if (strcmp(component, "hw-build") == 0) + hw_build_ptr = version; + else if (strcmp(component, "nolo") == 0) + nolo_version_ptr = version; + else if (strcmp(component, "boot-mode") == 0) + boot_mode_ptr = version; + break; + default: + break; + } + i++; + } +} + +static void reuse_omap_atags(struct tag_omap *t) +{ + char *component; + char *version; + while (t->hdr.tag) { + switch (t->hdr.tag) { + case OMAP_TAG_BOOT_REASON: + memset(boot_reason_ptr, 0, 12); + strcpy(boot_reason_ptr, t->u.boot_reason.reason_str); + break; + case OMAP_TAG_VERSION_STR: + component = t->u.version.component; + version = t->u.version.version; + if (strcmp(component, "hw-build") == 0) { + memset(hw_build_ptr, 0, 12); + strcpy(hw_build_ptr, version); + } else if (strcmp(component, "nolo") == 0) { + memset(nolo_version_ptr, 0, 12); + strcpy(nolo_version_ptr, version); + } else if (strcmp(component, "boot-mode") == 0) { + memset(boot_mode_ptr, 0, 12); + strcpy(boot_mode_ptr, version); + } + break; + default: + break; + } + t = tag_omap_next(t); + } +} + +/* + * Routine: reuse_atags + * Description: Reuse atags from previous bootloader. + * Reuse only only HW build, boot reason, boot mode and nolo + */ +static void reuse_atags(void) +{ + struct tag *t = (struct tag *)gd->bd->bi_boot_params; + + /* First tag must be ATAG_CORE */ + if (t->hdr.tag != ATAG_CORE) + return; + + if (!boot_reason_ptr || !hw_build_ptr) + return; + + /* Last tag must be ATAG_NONE */ + while (t->hdr.tag != ATAG_NONE) { + switch (t->hdr.tag) { + case ATAG_REVISION: + memset(hw_build_ptr, 0, 12); + sprintf(hw_build_ptr, "%x", t->u.revision.rev); + break; + case ATAG_BOARD: + reuse_omap_atags((struct tag_omap *)&t->u); + break; + default: + break; + } + t = tag_next(t); + } +} + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + /* in SRAM or SDRAM, finish GPMC */ + gpmc_init(); + /* boot param addr */ + gd->bd->bi_boot_params = OMAP34XX_SDRC_CS0 + 0x100; + return 0; +} + +/* + * Routine: get_board_revision + * Description: Return board revision. + */ +u32 get_board_rev(void) +{ + return simple_strtol(hw_build_ptr, NULL, 16); +} + +/* + * Routine: setup_board_tags + * Description: Append board specific boot tags. + */ +void setup_board_tags(struct tag **in_params) +{ + int setup_console_atag; + char *setup_boot_reason_atag; + char *setup_boot_mode_atag; + char *str; + int i; + int size; + int total_size; + struct tag *params; + struct tag_omap *t; + + params = (struct tag *)gd->bd->bi_boot_params; + + params->u.core.flags = 0x0; + params->u.core.pagesize = 0x1000; + params->u.core.rootdev = 0x0; + + /* append omap atag only if env setup_omap_atag is set to 1 */ + str = getenv("setup_omap_atag"); + if (!str || str[0] != '1') + return; + + str = getenv("setup_console_atag"); + if (str && str[0] == '1') + setup_console_atag = 1; + else + setup_console_atag = 0; + + setup_boot_reason_atag = getenv("setup_boot_reason_atag"); + setup_boot_mode_atag = getenv("setup_boot_mode_atag"); + + params = *in_params; + t = (struct tag_omap *)¶ms->u; + total_size = sizeof(struct tag_header); + + for (i = 0; omap[i].hdr.tag; i++) { + + /* skip serial console tag */ + if (!setup_console_atag && + omap[i].hdr.tag == OMAP_TAG_SERIAL_CONSOLE) + continue; + + size = omap[i].hdr.size + sizeof(struct tag_omap_header); + memcpy(t, &omap[i], size); + + /* set uart tag to 0 - disable serial console */ + if (!setup_console_atag && omap[i].hdr.tag == OMAP_TAG_UART) + t->u.uart.enabled_uarts = 0; + + /* change boot reason */ + if (setup_boot_reason_atag && + omap[i].hdr.tag == OMAP_TAG_BOOT_REASON) { + memset(t->u.boot_reason.reason_str, 0, 12); + strcpy(t->u.boot_reason.reason_str, + setup_boot_reason_atag); + } + + /* change boot mode */ + if (setup_boot_mode_atag && + omap[i].hdr.tag == OMAP_TAG_VERSION_STR && + strcmp(omap[i].u.version.component, "boot-mode") == 0) { + memset(t->u.version.version, 0, 12); + strcpy(t->u.version.version, setup_boot_mode_atag); + } + + total_size += size; + t = tag_omap_next(t); + + } + + params->hdr.tag = ATAG_BOARD; + params->hdr.size = total_size >> 2; + params = tag_next(params); + + *in_params = params; +} + +/* + * Routine: video_hw_init + * Description: Set up the GraphicDevice depending on sys_boot. + */ +void *video_hw_init(void) +{ + /* fill in Graphic Device */ + gdev.frameAdrs = 0x8f9c0000; + gdev.winSizeX = 800; + gdev.winSizeY = 480; + gdev.gdfBytesPP = 2; + gdev.gdfIndex = GDF_16BIT_565RGB; + memset((void *)gdev.frameAdrs, 0, 0xbb800); + return (void *) &gdev; +} + +/* + * Routine: twl4030_regulator_set_mode + * Description: Set twl4030 regulator mode over i2c powerbus. + */ +static void twl4030_regulator_set_mode(u8 id, u8 mode) +{ + u16 msg = MSG_SINGULAR(DEV_GRP_P1, id, mode); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg >> 8, + TWL4030_PM_MASTER_PB_WORD_MSB); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg & 0xff, + TWL4030_PM_MASTER_PB_WORD_LSB); +} + +static void omap3_emu_romcode_call(u32 service_id, u32 *parameters) +{ + u32 i, num_params = *parameters; + u32 *sram_scratch_space = (u32 *)OMAP3_PUBLIC_SRAM_SCRATCH_AREA; + + /* + * copy the parameters to an un-cached area to avoid coherency + * issues + */ + for (i = 0; i < num_params; i++) { + __raw_writel(*parameters, sram_scratch_space); + parameters++; + sram_scratch_space++; + } + + /* Now make the PPA call */ + do_omap3_emu_romcode_call(service_id, OMAP3_PUBLIC_SRAM_SCRATCH_AREA); +} + +/* + * Routine: omap3_update_aux_cr_secure_rx51 + * Description: Modify the contents Auxiliary Control Register. + * Parameters: + * set_bits - bits to set in ACR + * clr_bits - bits to clear in ACR + */ +static void omap3_update_aux_cr_secure_rx51(u32 set_bits, u32 clear_bits) +{ + struct emu_hal_params_rx51 emu_romcode_params = { 0, }; + u32 acr; + + /* Read ACR */ + asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); + acr &= ~clear_bits; + acr |= set_bits; + + emu_romcode_params.num_params = 2; + emu_romcode_params.param1 = acr; + + omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR, + (u32 *)&emu_romcode_params); +} + +/* + * Routine: misc_init_r + * Description: Configure board specific parts. + */ +int misc_init_r(void) +{ + char buf[12]; + u8 state; + + /* reset lp5523 led */ + i2c_set_bus_num(1); + state = 0xff; + i2c_write(0x32, 0x3d, 1, &state, 1); + i2c_set_bus_num(0); + + /* initialize twl4030 power managment */ + twl4030_power_init(); + + /* set VSIM to 1.8V */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED, + TWL4030_PM_RECEIVER_VSIM_VSEL_18, + TWL4030_PM_RECEIVER_VSIM_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); + + /* store I2C access state */ + twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &state, + TWL4030_PM_MASTER_PB_CFG); + + /* enable I2C access to powerbus (needed for twl4030 regulator) */ + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x02, + TWL4030_PM_MASTER_PB_CFG); + + /* set VAUX3, VSIM and VMMC1 state to active - enable eMMC memory */ + twl4030_regulator_set_mode(RES_VAUX3, RES_STATE_ACTIVE); + twl4030_regulator_set_mode(RES_VSIM, RES_STATE_ACTIVE); + twl4030_regulator_set_mode(RES_VMMC1, RES_STATE_ACTIVE); + + /* restore I2C access state */ + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, state, + TWL4030_PM_MASTER_PB_CFG); + + /* set env variable attkernaddr for relocated kernel */ + sprintf(buf, "%#x", KERNEL_ADDRESS); + setenv("attkernaddr", buf); + + /* initialize omap tags */ + init_omap_tags(); + + /* reuse atags from previous bootloader */ + reuse_atags(); + + dieid_num_r(); + print_cpuinfo(); + + /* + * Cortex-A8(r1p0..r1p2) errata 430973 workaround + * Set IBE bit in Auxiliary Control Register + */ + omap3_update_aux_cr_secure_rx51(1 << 6, 0); + + return 0; +} + +/* + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + */ +void set_muxconf_regs(void) +{ + MUX_RX51(); +} + +static unsigned long int twl_wd_time; /* last time of watchdog reset */ +static unsigned long int twl_i2c_lock; + +/* + * Routine: hw_watchdog_reset + * Description: Reset timeout of twl4030 watchdog. + */ +void hw_watchdog_reset(void) +{ + u8 timeout = 0; + + /* do not reset watchdog too often - max every 4s */ + if (get_timer(twl_wd_time) < 4 * CONFIG_SYS_HZ) + return; + + /* localy lock twl4030 i2c bus */ + if (test_and_set_bit(0, &twl_i2c_lock)) + return; + + /* read actual watchdog timeout */ + twl4030_i2c_read_u8(TWL4030_CHIP_PM_RECEIVER, &timeout, + TWL4030_PM_RECEIVER_WATCHDOG_CFG); + + /* timeout 0 means watchdog is disabled */ + /* reset watchdog timeout to 31s (maximum) */ + if (timeout != 0) + twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 31, + TWL4030_PM_RECEIVER_WATCHDOG_CFG); + + /* store last watchdog reset time */ + twl_wd_time = get_timer(0); + + /* localy unlock twl4030 i2c bus */ + test_and_clear_bit(0, &twl_i2c_lock); +} + +/* + * TWL4030 keypad handler for cfb_console + */ + +static const char keymap[] = { + /* normal */ + 'q', 'o', 'p', ',', '\b', 0, 'a', 's', + 'w', 'd', 'f', 'g', 'h', 'j', 'k', 'l', + 'e', '.', 0, '\r', 0, 'z', 'x', 'c', + 'r', 'v', 'b', 'n', 'm', ' ', ' ', 0, + 't', 0, 0, 0, 0, 0, 0, 0, + 'y', 0, 0, 0, 0, 0, 0, 0, + 'u', 0, 0, 0, 0, 0, 0, 0, + 'i', 5, 6, 0, 0, 0, 0, 0, + /* fn */ + '1', '9', '0', '=', '\b', 0, '*', '+', + '2', '#', '-', '_', '(', ')', '&', '!', + '3', '?', '^', '\r', 0, 156, '$', 238, + '4', '/', '\\', '"', '\'', '@', 0, '<', + '5', '|', '>', 0, 0, 0, 0, 0, + '6', 0, 0, 0, 0, 0, 0, 0, + '7', 0, 0, 0, 0, 0, 0, 0, + '8', 16, 17, 0, 0, 0, 0, 0, +}; + +static u8 keys[8]; +static u8 old_keys[8] = {0, 0, 0, 0, 0, 0, 0, 0}; +#define KEYBUF_SIZE 32 +static u8 keybuf[KEYBUF_SIZE]; +static u8 keybuf_head; +static u8 keybuf_tail; + +/* + * Routine: rx51_kp_init + * Description: Initialize HW keyboard. + */ +int rx51_kp_init(void) +{ + int ret = 0; + u8 ctrl; + ret = twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &ctrl, + TWL4030_KEYPAD_KEYP_CTRL_REG); + + if (ret) + return ret; + + /* turn on keyboard and use hardware scanning */ + ctrl |= TWL4030_KEYPAD_CTRL_KBD_ON; + ctrl |= TWL4030_KEYPAD_CTRL_SOFT_NRST; + ctrl |= TWL4030_KEYPAD_CTRL_SOFTMODEN; + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, ctrl, + TWL4030_KEYPAD_KEYP_CTRL_REG); + /* enable key event status */ + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0xfe, + TWL4030_KEYPAD_KEYP_IMR1); + /* enable interrupt generation on rising and falling */ + /* this is a workaround for qemu twl4030 emulation */ + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x57, + TWL4030_KEYPAD_KEYP_EDR); + /* enable ISR clear on read */ + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x05, + TWL4030_KEYPAD_KEYP_SIH_CTRL); + return 0; +} + +static void rx51_kp_fill(u8 k, u8 mods) +{ + /* check if some cursor key without meta fn key was pressed */ + if (!(mods & 2) && (k == 18 || k == 31 || k == 33 || k == 34)) { + keybuf[keybuf_tail++] = '\e'; + keybuf_tail %= KEYBUF_SIZE; + keybuf[keybuf_tail++] = '['; + keybuf_tail %= KEYBUF_SIZE; + if (k == 18) /* up */ + keybuf[keybuf_tail++] = 'A'; + else if (k == 31) /* left */ + keybuf[keybuf_tail++] = 'D'; + else if (k == 33) /* down */ + keybuf[keybuf_tail++] = 'B'; + else if (k == 34) /* right */ + keybuf[keybuf_tail++] = 'C'; + keybuf_tail %= KEYBUF_SIZE; + return; + } + + if (mods & 2) { /* fn meta key was pressed */ + k = keymap[k+64]; + } else { + k = keymap[k]; + if (mods & 1) { /* ctrl key was pressed */ + if (k >= 'a' && k <= 'z') + k -= 'a' - 1; + } + if (mods & 4) { /* shift key was pressed */ + if (k >= 'a' && k <= 'z') + k += 'A' - 'a'; + else if (k == '.') + k = ':'; + else if (k == ',') + k = ';'; + } + } + keybuf[keybuf_tail++] = k; + keybuf_tail %= KEYBUF_SIZE; +} + +/* + * Routine: rx51_kp_tstc + * Description: Test if key was pressed (from buffer). + */ +int rx51_kp_tstc(void) +{ + u8 c, r, dk, i; + u8 intr; + u8 mods; + + /* localy lock twl4030 i2c bus */ + if (test_and_set_bit(0, &twl_i2c_lock)) + return 0; + + /* twl4030 remembers up to 2 events */ + for (i = 0; i < 2; i++) { + + /* check interrupt register for events */ + twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &intr, + TWL4030_KEYPAD_KEYP_ISR1+(2*i)); + + /* no event */ + if (!(intr&1)) + continue; + + /* read the key state */ + i2c_read(TWL4030_CHIP_KEYPAD, + TWL4030_KEYPAD_FULL_CODE_7_0, 1, keys, 8); + + /* cut out modifier keys from the keystate */ + mods = keys[4] >> 4; + keys[4] &= 0x0f; + + for (c = 0; c < 8; c++) { + + /* get newly pressed keys only */ + dk = ((keys[c] ^ old_keys[c])&keys[c]); + old_keys[c] = keys[c]; + + /* fill the keybuf */ + for (r = 0; r < 8; r++) { + if (dk&1) + rx51_kp_fill((c*8)+r, mods); + dk = dk >> 1; + } + + } + + } + + /* localy unlock twl4030 i2c bus */ + test_and_clear_bit(0, &twl_i2c_lock); + + return (KEYBUF_SIZE + keybuf_tail - keybuf_head)%KEYBUF_SIZE; +} + +/* + * Routine: rx51_kp_getc + * Description: Get last pressed key (from buffer). + */ +int rx51_kp_getc(void) +{ + keybuf_head %= KEYBUF_SIZE; + while (!rx51_kp_tstc()) + WATCHDOG_RESET(); + return keybuf[keybuf_head++]; +} + +/* + * Routine: board_mmc_init + * Description: Initialize mmc devices. + */ +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0, 0, 0); + omap_mmc_init(1, 0, 0); + return 0; +} diff --git a/board/nokia/rx51/rx51.h b/board/nokia/rx51/rx51.h new file mode 100644 index 0000000..e66e241 --- /dev/null +++ b/board/nokia/rx51/rx51.h @@ -0,0 +1,389 @@ +/* + * (C) Copyright 2012 + * Ивайло Димитров <freemangordon@abv.bg> + * + * (C) Copyright 2011-2012 + * Pali Rohár <pali.rohar@gmail.com> + * + * (C) Copyright 2008 + * Dirk Behme <dirk.behme@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _RX51_H_ +#define _RX51_H_ + +/* Needed for ROM SMC call */ +struct emu_hal_params_rx51 { + u32 num_params; + u32 param1; + u32 param2; + u32 param3; + u32 param4; +}; + +int print_cpuinfo(void); + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_RX51() \ +/* SDRC */\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ +/* GPMC */\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*nDMA_REQ2*/\ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1)) /*nDMA_REQ3*/\ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_WAIT2*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV*/\ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0*/\ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ +/* DSS */\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ +/* CAMERA */\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS*/\ + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS*/\ + MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ + MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ + MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ + MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ + MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ + MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ + MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ + MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ + MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ + MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ + MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ + MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ + MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\ +/* Audio Interface */\ + MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ + MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLK*/\ + MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ + MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ +/* Expansion card */\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ +/* Wireless LAN */\ + MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\ + MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\ + MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\ + MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\ + MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ +/* Bluetooth */\ + MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\ + MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\ + MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M1)) /*UART2_RX*/\ + MUX_VAL(CP(UART2_CTS), (IEN | PTD | DIS | M4)) /*GPIO_144*/\ + MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M4)) /*GPIO_145*/\ + MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M4)) /*GPIO_146*/\ + MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147*/\ +/* Modem Interface */\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/\ + MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M1)) /*SSI1_DAT*/\ + MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M1)) /*SSI1_FLAG*/\ + MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M1)) /*SSI1_RDY*/\ + MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M1)) /*SSI1_WAKE*/\ + MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M4)) /*GPIO_157*/\ + MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\ + MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\ + MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\ +/* Serial Interface */\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS*/\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS*/\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX*/\ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DA0*/\ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DA1*/\ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DA2*/\ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DA3*/\ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DA4*/\ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DA5*/\ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DA6*/\ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DA7*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M4)) /*GPIO_168*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ + MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\ + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTU | EN | M4)) /*GPIO_171*/\ + MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTU | EN | M4)) /*GPIO_172*/\ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOM*/\ + MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\ + MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\ + MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\ +/* USB EHCI (port 2) */\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTU | DIS | M3)) /*HSUSB2_DA2*/\ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTU | DIS | M3)) /*HSUSB2_DA7*/\ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTU | DIS | M3)) /*HSUSB2_DA4*/\ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTU | DIS | M3)) /*HSUSB2_DA5*/\ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTU | DIS | M3)) /*HSUSB2_DA6*/\ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTU | DIS | M3)) /*HSUSB2_DA3*/\ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_CLK*/\ + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_STP*/\ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DIR*/\ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_NXT*/\ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DA0*/\ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DA1*/\ +/* Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3*/\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*MMC1_WP*/\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MD*/\ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_STP*/\ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA0*/\ + MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA1*/\ + MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA2*/\ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA7*/\ + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA4*/\ + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA5*/\ + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA6*/\ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA3*/\ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DIR*/\ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_NXT*/\ + MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ + MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ + MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\ + MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\ + MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\ + MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\ + MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\ + MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\ + MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\ + MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\ + MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\ + MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\ + MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\ + MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\ + MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\ + MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\ + MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\ + MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\ + MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\ + MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\ + MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\ + MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\ + MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\ + MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\ + MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\ + MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\ + MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\ + MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\ + MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\ + MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\ + MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\ + MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\ + MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26m*/\ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespw*/\ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswa*/\ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9ni*/\ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6*/\ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmare0*/\ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmare1*/\ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmare2*/\ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmare3*/\ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrs*/\ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtc*/\ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeu*/\ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlere*/\ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleac*/\ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusfl*/\ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusfl*/\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/ + +#define MUX_RX51_C() \ + MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\ + MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\ + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\ + MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\ + MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/ + +#endif diff --git a/board/nokia/rx51/tag_omap.h b/board/nokia/rx51/tag_omap.h new file mode 100644 index 0000000..60fa26f --- /dev/null +++ b/board/nokia/rx51/tag_omap.h @@ -0,0 +1,311 @@ +/* + * (C) Copyright 2011-2012 + * Pali Rohár <pali.rohar@gmail.com> + * + * (C) Copyright 2011 + * marcel@mesa.nl, Mesa Consulting B.V. + * + * (C) Copyright 2004-2005 + * Nokia Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +/* + * Code copied from maemo kernel 2.6.28 file + * arch/arm/plat-omap/include/mach/board.h + * + * Information structures for board-specific data + * + * Copyright (C) 2004 Nokia Corporation + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + */ + +/* Different peripheral ids */ +#define OMAP_TAG_CLOCK 0x4f01 +#define OMAP_TAG_SERIAL_CONSOLE 0x4f03 +#define OMAP_TAG_USB 0x4f04 +#define OMAP_TAG_LCD 0x4f05 +#define OMAP_TAG_GPIO_SWITCH 0x4f06 +#define OMAP_TAG_UART 0x4f07 +#define OMAP_TAG_FBMEM 0x4f08 +#define OMAP_TAG_STI_CONSOLE 0x4f09 +#define OMAP_TAG_CAMERA_SENSOR 0x4f0a +#define OMAP_TAG_PARTITION 0x4f0b +#define OMAP_TAG_TEA5761 0x4f10 +#define OMAP_TAG_TMP105 0x4f11 + +#define OMAP_TAG_BOOT_REASON 0x4f80 +#define OMAP_TAG_FLASH_PART_STR 0x4f81 +#define OMAP_TAG_VERSION_STR 0x4f82 + +#define OMAP_TAG_NOKIA_BT 0x4e01 +#define OMAP_TAG_WLAN_CX3110X 0x4e02 +#define OMAP_TAG_CBUS 0x4e03 +#define OMAP_TAG_EM_ASIC_BB5 0x4e04 + + +struct omap_clock_config { + /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */ + u8 system_clock_type; +}; + +struct omap_serial_console_config { + u8 console_uart; + u32 console_speed; +}; + +struct omap_sti_console_config { + unsigned enable:1; + u8 channel; +}; + +struct omap_usb_config { + /* Configure drivers according to the connectors on your board: + * - "A" connector (rectagular) + * ... for host/OHCI use, set "register_host". + * - "B" connector (squarish) or "Mini-B" + * ... for device/gadget use, set "register_dev". + * - "Mini-AB" connector (very similar to Mini-B) + * ... for OTG use as device OR host, initialize "otg" + */ + unsigned register_host:1; + unsigned register_dev:1; + u8 otg; /* port number, 1-based: usb1 == 2 */ + + u8 hmc_mode; + + /* implicitly true if otg: host supports remote wakeup? */ + u8 rwc; + + /* signaling pins used to talk to transceiver on usbN: + * 0 == usbN unused + * 2 == usb0-only, using internal transceiver + * 3 == 3 wire bidirectional + * 4 == 4 wire bidirectional + * 6 == 6 wire unidirectional (or TLL) + */ + u8 pins[3]; +}; + +struct omap_lcd_config { + char panel_name[16]; + char ctrl_name[16]; + s16 nreset_gpio; + u8 data_lines; +}; + +struct omap_fbmem_config { + u32 start; + u32 size; +}; + +struct omap_gpio_switch_config { + char name[12]; + u16 gpio; + u8 flags:4; + u8 type:4; + unsigned int key_code:24; /* Linux key code */ +}; + +struct omap_uart_config { + /* Bit field of UARTs present; bit 0 --> UART1 */ + unsigned int enabled_uarts; +}; + +struct omap_tea5761_config { + u16 enable_gpio; +}; + +struct omap_partition_config { + char name[16]; + unsigned int size; + unsigned int offset; + /* same as in include/linux/mtd/partitions.h */ + unsigned int mask_flags; +}; + +struct omap_flash_part_str_config { + char part_table[0]; +}; + +struct omap_boot_reason_config { + char reason_str[12]; +}; + +struct omap_version_config { + char component[12]; + char version[12]; +}; + +/* + * Code copied from maemo kernel 2.6.28 file + * arch/arm/plat-omap/include/mach/board-nokia.h + * + * Information structures for Nokia-specific board config data + * + * Copyright (C) 2005 Nokia Corporation + */ + +struct omap_bluetooth_config { + u8 chip_type; + u8 bt_wakeup_gpio; + u8 host_wakeup_gpio; + u8 reset_gpio; + u8 bt_uart; + u8 bd_addr[6]; + u8 bt_sysclk; +}; + +struct omap_wlan_cx3110x_config { + u8 chip_type; + u8 reserverd; + s16 power_gpio; + s16 irq_gpio; + s16 spi_cs_gpio; +}; + +struct omap_cbus_config { + s16 clk_gpio; + s16 dat_gpio; + s16 sel_gpio; +}; + +struct omap_em_asic_bb5_config { + s16 retu_irq_gpio; + s16 tahvo_irq_gpio; +}; + +/* + * omap_tag handling + * + * processing omap tag structures + * + * Copyright (C) 2011 marcel@mesa.nl, Mesa Consulting B.V. + * Copyright (C) 2012 Pali Rohár <pali.rohar@gmail.com> + */ + +/* TI OMAP specific information */ +#define ATAG_BOARD 0x414f4d50 + +struct tag_omap_header { + u16 tag; + u16 size; +}; + +struct tag_omap { + struct tag_omap_header hdr; + union { + struct omap_clock_config clock; + struct omap_serial_console_config serial_console; + struct omap_sti_console_config sti_console; + struct omap_usb_config usb; + struct omap_lcd_config lcd; + struct omap_fbmem_config fbmem; + struct omap_gpio_switch_config gpio_switch; + struct omap_uart_config uart; + struct omap_tea5761_config tea5761; + struct omap_partition_config partition; + struct omap_flash_part_str_config flash_part_str; + struct omap_boot_reason_config boot_reason; + struct omap_version_config version; + struct omap_bluetooth_config bluetooth; + struct omap_wlan_cx3110x_config wlan_cx3110x; + struct omap_cbus_config cbus; + struct omap_em_asic_bb5_config em_asic_bb5; + } u; +}; + +#define tag_omap_next(t) ((struct tag_omap *)((u8 *)(t) + \ + (t)->hdr.size + sizeof(struct tag_omap_header))) + +#define OMAP_TAG_HEADER_CONFIG(config, type) \ + .hdr.tag = config, \ + .hdr.size = sizeof(struct type) + +#define OMAP_TAG_UART_CONFIG(p1) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_UART, omap_uart_config), \ + .u.uart.enabled_uarts = p1, \ + } + +#define OMAP_TAG_SERIAL_CONSOLE_CONFIG(p1, p2) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_SERIAL_CONSOLE, \ + omap_serial_console_config), \ + .u.serial_console.console_uart = p1, \ + .u.serial_console.console_speed = p2, \ + } + +#define OMAP_TAG_LCD_CONFIG(p1, p2, p3, p4) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_LCD, omap_lcd_config), \ + .u.lcd.panel_name = p1, \ + .u.lcd.ctrl_name = p2, \ + .u.lcd.nreset_gpio = p3, \ + .u.lcd.data_lines = p4, \ + } + +#define OMAP_TAG_GPIO_SWITCH_CONFIG(p1, p2, p3, p4, p5) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_GPIO_SWITCH, \ + omap_gpio_switch_config), \ + .u.gpio_switch.name = p1, \ + .u.gpio_switch.gpio = p2, \ + .u.gpio_switch.flags = p3, \ + .u.gpio_switch.type = p4, \ + .u.gpio_switch.key_code = p5, \ + } + +#define OMAP_TAG_WLAN_CX3110X_CONFIG(p1, p2, p3, p4, p5) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_WLAN_CX3110X, \ + omap_wlan_cx3110x_config), \ + .u.wlan_cx3110x.chip_type = p1, \ + .u.wlan_cx3110x.reserverd = p2, \ + .u.wlan_cx3110x.power_gpio = p3, \ + .u.wlan_cx3110x.irq_gpio = p4, \ + .u.wlan_cx3110x.spi_cs_gpio = p5, \ + } + +#define OMAP_TAG_PARTITION_CONFIG(p1, p2, p3, p4) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_PARTITION, \ + omap_partition_config), \ + .u.partition.name = p1, \ + .u.partition.size = p2, \ + .u.partition.offset = p3, \ + .u.partition.mask_flags = p4, \ + } + +#define OMAP_TAG_BOOT_REASON_CONFIG(p1) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_BOOT_REASON, \ + omap_boot_reason_config), \ + .u.boot_reason.reason_str = p1, \ + } + +#define OMAP_TAG_VERSION_STR_CONFIG(p1, p2) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_VERSION_STR, \ + omap_version_config), \ + .u.version.component = p1, \ + .u.version.version = p2, \ + } diff --git a/board/nvidia/common/Makefile b/board/nvidia/common/Makefile index a93d458..f6f419e 100644 --- a/board/nvidia/common/Makefile +++ b/board/nvidia/common/Makefile @@ -25,9 +25,7 @@ endif LIB = $(obj)lib$(VENDOR).o -COBJS-y += board.o -COBJS-$(CONFIG_SPI_UART_SWITCH) += uart-spi-switch.o -COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o +include common.mk COBJS := $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/nvidia/common/common.mk b/board/nvidia/common/common.mk new file mode 100644 index 0000000..bd6202c --- /dev/null +++ b/board/nvidia/common/common.mk @@ -0,0 +1,4 @@ +# common options for all tegra boards +COBJS-y += ../../nvidia/common/board.o +COBJS-$(CONFIG_SPI_UART_SWITCH) += ../../nvidia/common/uart-spi-switch.o +COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += ../../nvidia/common/emc.o diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts index ca5facb..5645a8d 100644 --- a/board/nvidia/dts/tegra20-harmony.dts +++ b/board/nvidia/dts/tegra20-harmony.dts @@ -8,6 +8,7 @@ aliases { usb0 = "/usb@c5008000"; + usb1 = "/usb@c5004000"; }; memory { @@ -52,7 +53,7 @@ }; usb@c5004000 { - status = "disabled"; + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ }; nand-controller@70008000 { diff --git a/board/nvidia/dts/tegra20-whistler.dts b/board/nvidia/dts/tegra20-whistler.dts index 38599bd..f830cf3 100644 --- a/board/nvidia/dts/tegra20-whistler.dts +++ b/board/nvidia/dts/tegra20-whistler.dts @@ -9,7 +9,6 @@ aliases { i2c0 = "/i2c@7000d000"; usb0 = "/usb@c5008000"; - usb1 = "/usb@c5000000"; }; memory { @@ -61,6 +60,10 @@ }; }; + usb@c5000000 { + status = "disabled"; + }; + usb@c5004000 { status = "disabled"; }; diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c index 32ed9bb..c7590ac 100644 --- a/board/nvidia/harmony/harmony.c +++ b/board/nvidia/harmony/harmony.c @@ -75,3 +75,12 @@ int board_mmc_init(bd_t *bd) return 0; } #endif + +void pin_mux_usb(void) +{ + funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI); + pinmux_set_func(PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4); + pinmux_tristate_disable(PINGRP_CDEV2); + /* USB2 PHY reset GPIO */ + pinmux_tristate_disable(PINGRP_UAC); +} diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index 4e8a183..c412c07 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -26,6 +26,7 @@ #include <asm/arch/tegra.h> #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> +#include <asm/arch/gpio.h> #include <asm/arch/pinmux.h> #include <asm/arch-tegra/mmc.h> #include <asm/gpio.h> @@ -34,24 +35,15 @@ #endif /* TODO: Remove this code when the SPI switch is working */ -#ifndef CONFIG_SPI_UART_SWITCH -/* - * Routine: gpio_config_uart_seaboard - * Description: Force GPIO_PI3 low on Seaboard so UART4 works. - */ -static void gpio_config_uart_seaboard(void) +#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA) +void gpio_early_init_uart(void) { /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */ +#ifndef CONFIG_SPL_BUILD gpio_request(GPIO_PI3, NULL); +#endif gpio_direction_output(GPIO_PI3, 0); } - -void gpio_early_init_uart(void) -{ - if (machine_is_ventana()) - return; - gpio_config_uart_seaboard(); -} #endif #ifdef CONFIG_TEGRA_MMC diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 1f0b1a7..b56a801 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -68,6 +68,11 @@ static inline int board_is_evm_sk(void) return !strncmp("A335X_SK", header.name, HDR_NAME_LEN); } +static inline int board_is_idk(void) +{ + return !strncmp(header.config, "SKU#02", 6); +} + /* * Read header information from EEPROM into global structure. */ @@ -242,7 +247,24 @@ void s_init(void) /* UART softreset */ u32 regVal; +#ifdef CONFIG_SERIAL1 enable_uart0_pin_mux(); +#endif /* CONFIG_SERIAL1 */ +#ifdef CONFIG_SERIAL2 + enable_uart1_pin_mux(); +#endif /* CONFIG_SERIAL2 */ +#ifdef CONFIG_SERIAL3 + enable_uart2_pin_mux(); +#endif /* CONFIG_SERIAL3 */ +#ifdef CONFIG_SERIAL4 + enable_uart3_pin_mux(); +#endif /* CONFIG_SERIAL4 */ +#ifdef CONFIG_SERIAL5 + enable_uart4_pin_mux(); +#endif /* CONFIG_SERIAL5 */ +#ifdef CONFIG_SERIAL6 + enable_uart5_pin_mux(); +#endif /* CONFIG_SERIAL6 */ regVal = readl(&uart_base->uartsyscfg); regVal |= UART_RESET; @@ -381,7 +403,7 @@ int board_eth_init(bd_t *bis) return -1; } - if (board_is_bone() || board_is_bone_lt()) { + if (board_is_bone() || board_is_bone_lt() || board_is_idk()) { writel(MII_MODE_ENABLE, &cdev->miisel); cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_MII; diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h index 7985ab2..48e112e 100644 --- a/board/ti/am335x/board.h +++ b/board/ti/am335x/board.h @@ -44,6 +44,11 @@ struct am335x_baseboard_id { * is required on the board. */ void enable_uart0_pin_mux(void); +void enable_uart1_pin_mux(void); +void enable_uart2_pin_mux(void); +void enable_uart3_pin_mux(void); +void enable_uart4_pin_mux(void); +void enable_uart5_pin_mux(void); void enable_i2c0_pin_mux(void); void enable_board_pin_mux(struct am335x_baseboard_id *header); #endif diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index 2992979..8437ef5 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -27,6 +27,36 @@ static struct module_pin_mux uart0_pin_mux[] = { {-1}, }; +static struct module_pin_mux uart1_pin_mux[] = { + {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART1_RXD */ + {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, /* UART1_TXD */ + {-1}, +}; + +static struct module_pin_mux uart2_pin_mux[] = { + {OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART2_RXD */ + {OFFSET(spi0_d0), (MODE(1) | PULLUDEN)}, /* UART2_TXD */ + {-1}, +}; + +static struct module_pin_mux uart3_pin_mux[] = { + {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */ + {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */ + {-1}, +}; + +static struct module_pin_mux uart4_pin_mux[] = { + {OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */ + {OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)}, /* UART4_TXD */ + {-1}, +}; + +static struct module_pin_mux uart5_pin_mux[] = { + {OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)}, /* UART5_RXD */ + {OFFSET(lcd_data8), (MODE(4) | PULLUDEN)}, /* UART5_TXD */ + {-1}, +}; + static struct module_pin_mux mmc0_pin_mux[] = { {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ @@ -39,6 +69,17 @@ static struct module_pin_mux mmc0_pin_mux[] = { {-1}, }; +static struct module_pin_mux mmc0_no_cd_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ + {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ + {-1}, +}; + static struct module_pin_mux mmc0_pin_mux_sk_evm[] = { {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ @@ -135,6 +176,30 @@ void enable_uart0_pin_mux(void) configure_module_pin_mux(uart0_pin_mux); } +void enable_uart1_pin_mux(void) +{ + configure_module_pin_mux(uart1_pin_mux); +} + +void enable_uart2_pin_mux(void) +{ + configure_module_pin_mux(uart2_pin_mux); +} + +void enable_uart3_pin_mux(void) +{ + configure_module_pin_mux(uart3_pin_mux); +} + +void enable_uart4_pin_mux(void) +{ + configure_module_pin_mux(uart4_pin_mux); +} + +void enable_uart5_pin_mux(void) +{ + configure_module_pin_mux(uart5_pin_mux); +} void enable_i2c0_pin_mux(void) { @@ -196,12 +261,27 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header) configure_module_pin_mux(mmc1_pin_mux); configure_module_pin_mux(spi0_pin_mux); } + } else if (!strncmp(header->config, "SKU#02", 6)) { + /* + * Industrial Motor Control (IDK) + * note: IDK console is on UART3 by default. + * So u-boot mus be build with CONFIG_SERIAL4 and + * CONFIG_CONS_INDEX=4 + */ + configure_module_pin_mux(mii1_pin_mux); + configure_module_pin_mux(mmc0_no_cd_pin_mux); } else if (!strncmp(header->name, "A335X_SK", HDR_NAME_LEN)) { /* Starter Kit EVM */ configure_module_pin_mux(i2c1_pin_mux); configure_module_pin_mux(gpio0_7_pin_mux); configure_module_pin_mux(rgmii1_pin_mux); configure_module_pin_mux(mmc0_pin_mux_sk_evm); + } else if (!strncmp(header->name, "A335BNLT", HDR_NAME_LEN)) { + /* Beaglebone LT pinmux */ + configure_module_pin_mux(i2c1_pin_mux); + configure_module_pin_mux(mii1_pin_mux); + configure_module_pin_mux(mmc0_pin_mux); + configure_module_pin_mux(mmc1_pin_mux); } else { puts("Unknown board, cannot configure pinmux."); hang(); diff --git a/board/toradex/colibri_t20-common/colibri_t20-common.c b/board/toradex/colibri_t20-common/colibri_t20-common.c new file mode 100644 index 0000000..6d5e47d --- /dev/null +++ b/board/toradex/colibri_t20-common/colibri_t20-common.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 Lucas Stach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/funcmux.h> +#include <asm/arch/pinmux.h> +#include <asm/arch-tegra/board.h> + +#include "colibri_t20-common.h" + +#ifdef CONFIG_USB_EHCI_TEGRA +void colibri_t20_common_pin_mux_usb(void) +{ + /* module internal USB bus to connect ethernet chipset */ + funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI); + /* ULPI reference clock output */ + pinmux_set_func(PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4); + pinmux_tristate_disable(PINGRP_CDEV2); + /* PHY reset GPIO */ + pinmux_tristate_disable(PINGRP_UAC); + /* VBus GPIO */ + pinmux_tristate_disable(PINGRP_DTE); +} +#endif + +#ifdef CONFIG_TEGRA_NAND +void pin_mux_nand(void) +{ + funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_NDFLASH_KBC_8_BIT); +} +#endif diff --git a/board/toradex/colibri_t20-common/colibri_t20-common.h b/board/toradex/colibri_t20-common/colibri_t20-common.h new file mode 100644 index 0000000..76dc860 --- /dev/null +++ b/board/toradex/colibri_t20-common/colibri_t20-common.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Lucas Stach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +void colibri_t20_common_pin_mux_usb(void); diff --git a/board/toradex/colibri_t20_iris/Makefile b/board/toradex/colibri_t20_iris/Makefile new file mode 100644 index 0000000..c138729 --- /dev/null +++ b/board/toradex/colibri_t20_iris/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2012 Lucas Stach +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# + +include $(TOPDIR)/config.mk + +$(shell mkdir -p $(obj)../../nvidia/common) +$(shell mkdir -p $(obj)../colibri_t20-common) + +LIB = $(obj)lib$(BOARD).o + +COBJS := ../../nvidia/common/board.o +COBJS += ../colibri_t20-common/colibri_t20-common.o +COBJS += $(BOARD).o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/toradex/colibri_t20_iris/colibri_t20_iris.c b/board/toradex/colibri_t20_iris/colibri_t20_iris.c new file mode 100644 index 0000000..e40a986 --- /dev/null +++ b/board/toradex/colibri_t20_iris/colibri_t20_iris.c @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2012 Lucas Stach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <common.h> +#include <asm/gpio.h> +#include <asm/arch/clock.h> +#include <asm/arch/funcmux.h> +#include <asm/arch/pinmux.h> +#include <asm/arch-tegra/board.h> +#include <asm/arch-tegra/mmc.h> + +#include "../colibri_t20-common/colibri_t20-common.h" + +#ifdef CONFIG_USB_EHCI_TEGRA +void pin_mux_usb(void) +{ + colibri_t20_common_pin_mux_usb(); + + /* USB 1 aka Tegra USB port 3 VBus*/ + pinmux_tristate_disable(PINGRP_SPIG); +} +#endif + +#ifdef CONFIG_TEGRA_MMC +int board_mmc_init(bd_t *bd) +{ + funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT); + pinmux_tristate_disable(PINGRP_GMB); + + tegra_mmc_init(0, 4, -1, GPIO_PC7); + + return 0; +} +#endif diff --git a/board/toradex/dts/tegra20-colibri_t20_iris.dts b/board/toradex/dts/tegra20-colibri_t20_iris.dts new file mode 100644 index 0000000..c29b43a --- /dev/null +++ b/board/toradex/dts/tegra20-colibri_t20_iris.dts @@ -0,0 +1,38 @@ +/dts-v1/; + +/include/ ARCH_CPU_DTS + +/ { + model = "Toradex Colibri T20"; + compatible = "toradex,t20", "nvidia,tegra20"; + + aliases { + usb0 = "/usb@c5008000"; + usb1 = "/usb@c5000000"; + usb2 = "/usb@c5004000"; + }; + + usb@c5000000 { + dr_mode = "otg"; + }; + + usb@c5004000 { + nvidia,phy-reset-gpio = <&gpio 169 0>; /* PV1 */ + nvidia,vbus-gpio = <&gpio 217 0>; /* PBB1 */ + }; + + usb@c5008000 { + nvidia,vbus-gpio = <&gpio 178 1>; /* PW2 low-active */ + }; + + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 144 0>; /* PS0 */ + nvidia,width = <8>; + nvidia,timing = <15 100 25 80 25 10 15 10 100>; + + nand@0 { + reg = <0>; + compatible = "nand-flash"; + }; + }; +}; diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index f28eab0..abdd1aa 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -28,6 +28,7 @@ #include <asm/arch/imx-regs.h> #include <asm/arch/mx5x_pins.h> #include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> #include <asm/arch/iomux.h> #include <asm/gpio.h> #include <asm/arch/sys_proto.h> @@ -43,7 +44,7 @@ DECLARE_GLOBAL_DATA_PTR; -static struct fb_videomode nec_nl6448bc26_09c = { +static struct fb_videomode const nec_nl6448bc26_09c = { "NEC_NL6448BC26-09C", 60, /* Refresh */ 640, /* xres */ @@ -590,6 +591,7 @@ int board_mmc_init(bd_t *bis) mxc_iomux_set_pad(MX51_PIN_GPIO1_1, PAD_CTL_HYS_ENABLE); + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); } #endif @@ -225,7 +225,12 @@ versatileqemu arm arm926ejs versatile armltd integratorap_cm946es arm arm946es integrator armltd - integratorap:CM946ES integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES ca9x4_ct_vxp arm armv7 vexpress armltd -am335x_evm arm armv7 am335x ti am33xx +am335x_evm arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1 +am335x_evm_uart1 arm armv7 am335x ti am33xx am335x_evm:SERIAL2,CONS_INDEX=2 +am335x_evm_uart2 arm armv7 am335x ti am33xx am335x_evm:SERIAL3,CONS_INDEX=3 +am335x_evm_uart3 arm armv7 am335x ti am33xx am335x_evm:SERIAL4,CONS_INDEX=4 +am335x_evm_uart4 arm armv7 am335x ti am33xx am335x_evm:SERIAL5,CONS_INDEX=5 +am335x_evm_uart5 arm armv7 am335x ti am33xx am335x_evm:SERIAL6,CONS_INDEX=6 highbank arm armv7 highbank - highbank mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg mx51_efikasb arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg @@ -240,6 +245,7 @@ mx6qarm2 arm armv7 mx6qarm2 freesca mx6qsabreauto arm armv7 mx6qsabreauto freescale mx6 mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg mx6qsabresd arm armv7 mx6qsabresd freescale mx6 mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg +eco5pk arm armv7 eco5pk 8dtech omap3 cm_t35 arm armv7 cm_t35 - omap3 omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 @@ -264,6 +270,7 @@ devkit8000 arm armv7 devkit8000 timll mcx arm armv7 mcx htkw omap3 tricorder arm armv7 tricorder corscience omap3 twister arm armv7 twister technexion omap3 +nokia_rx51 arm armv7 rx51 nokia omap3 omap4_panda arm armv7 panda ti omap4 omap4_sdp4430 arm armv7 sdp4430 ti omap4 omap5_evm arm armv7 omap5_evm ti omap5 @@ -278,6 +285,7 @@ harmony arm armv7:arm720t harmony nvidia seaboard arm armv7:arm720t seaboard nvidia tegra20 ventana arm armv7:arm720t ventana nvidia tegra20 whistler arm armv7:arm720t whistler nvidia tegra20 +colibri_t20_iris arm armv7:arm720t colibri_t20_iris toradex tegra20 u8500_href arm armv7 u8500 st-ericsson u8500 snowball arm armv7 snowball st-ericsson u8500 kzm9g arm armv7 kzm9g kmc rmobile diff --git a/common/spl/spl.c b/common/spl/spl.c index 0d829c0..f068abd 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -113,13 +113,13 @@ void spl_parse_image_header(const struct image_header *header) } } -static void __noreturn jump_to_image_no_args(void) +__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { typedef void __noreturn (*image_entry_noargs_t)(u32 *); image_entry_noargs_t image_entry = - (image_entry_noargs_t) spl_image.entry_point; + (image_entry_noargs_t) spl_image->entry_point; - debug("image entry point: 0x%X\n", spl_image.entry_point); + debug("image entry point: 0x%X\n", spl_image->entry_point); /* Pass the saved boot_params from rom code */ #if defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU) image_entry = (image_entry_noargs_t)0x80100000; @@ -223,7 +223,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2) default: debug("Unsupported OS image.. Jumping nevertheless..\n"); } - jump_to_image_no_args(); + jump_to_image_no_args(&spl_image); } /* diff --git a/doc/README.nokia_rx51 b/doc/README.nokia_rx51 new file mode 100644 index 0000000..a8fdfcd --- /dev/null +++ b/doc/README.nokia_rx51 @@ -0,0 +1,104 @@ +Board: Nokia RX-51 aka N900 + +This board definition results in a u-boot.bin which can be chainloaded +from NOLO in qemu or on a real N900. It does very little hardware config +because NOLO has already configured the board. Only needed is enabling +internal eMMC memory via twl4030 regulator which is not enabled by NOLO. + +NOLO is expecting a kernel image and will treat any image it finds in +onenand as such. This u-boot is intended to be flashed to the N900 like +a kernel. In order to transparently boot the original kernel, it will be +appended to u-boot.bin at 0x40000. NOLO will load the entire image into +(random) memory and execute u-boot, which saves hw revision, boot reason +and boot mode ATAGs set by NOLO. Then the bootscripts will attempt to load +uImage or boot.scr from a fat, ext2/ext3 or ext4 filesystem in external +SD card or internal eMMC memory. If this fails or keyboard is closed then +the appended kernel image will be booted using some generated and some +stored ATAGs (see boot order). + +There is support for hardware watchdog. Hardware watchdog is started by +NOLO so u-boot must kick watchdog to prevent reboot device (but not very +often, max every 2 seconds). There is also support for framebuffer display +output with ANSI espace codes and the N900 HW keyboard input. USB tty works +but is disabled because it prevents the current Maemo kernel from booting. + +When U-Boot is starting it enable IBE bit in Auxiliary Control Register, +which is needed for Thumb-2 ISA support. It is workaround for errata 430973. + +Default boot order: + + * 0. if keyboard is closed boot automatically attached kernel image + * 1. try boot from external SD card + * 2. try boot from internal eMMC memory + * 3. try boot from attached kernel image + +Boot from SD or eMMC in this order: + + * 1. + * 1.1 find boot.scr on first fat partition + * 1.2 find uImage on first fat parition + * 1.3 same order for 2. - 4. fat partition + * 2. same as 1. but for ext2/3 partition + * 3. same as 1. but for ext4 partition + + +Available additional commands/variables: + + * run sercon - Use serial port for control + * run usbcon - Use usbtty for control + * run vgacon - Use framebuffer and HW keyboard for control (default) + + * run sdboot - Boot from external SD card (see boot order) + * run emmcboot - Boot from internal eMMC memory (see boot order) + * run attachboot - Boot attached kernel image (attached to U-Boot binary) + + * run scriptload - Load boot script ${mmcscriptfile} + * run scriptboot - Run loaded boot script + * run kernload - Load kernel image ${mmckernfile} + * run initrdload - Load initrd image ${mmcinitrdfile} + * run kernboot - Boot loaded kernel image + * run kerninitrdboot - Boot loaded kernel image with loaded initrd image + + * run trymmcscriptboot - Try to load and boot script ${mmcscriptfile} + * run trymmckernboot - Try to load and boot kernel image ${mmckernfile} + * run trymmckerninitrdboot - Try to load and boot kernel image ${mmckernfile} + with initrd image ${mmcinitrdfile} + +Additional variables for loading files from mmc: + + * mmc ${mmcnum} (0 - external, 1 - internal) + * partition number ${mmcpart} (1 - 4) + * parition type ${mmctype} (fat, ext2) + +Additional varuables for booting kernel: + + * setup_omap_atag - Add OMAP table into atags structure (needs maemo kernel) + * setup_console_atag - Enable serial console in OMAP table + * setup_boot_reason_atag - Change boot reason in OMAP table + * setup_boot_mode_atag - Change boot mode in OMAP table + +USB TTY: + + Maemo kernel 2.6.28 will crash if u-boot enable usb tty. So USB TTY is disabled. + For enabling USB TTY just add this line to file include/configs/nokia_rx51.h + + #define CONFIG_USB_TTY + + +ONENAND support: + + ONENAND support is disabled because not working yet and cause linux kernel to + crash or no access to mtd. For enabling ONENAND support add this line at begin + of file include/configs/nokia_rx51.h + + #define ONENAND_SUPPORT + + +UBIFS support: + + UBIFS support is disabled, because U-Boot image is too big and cannot be + flashed with attached zImage to RX-51 kernel nand area. For enabling UBIFS + support first enable ONENAND support and then add this line at begin of file + include/configs/nokia_rx51.h + + #define UBIFS_SUPPORT diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 301dd8c..e93e38a 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -412,10 +412,10 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) static void set_sysctl(struct mmc *mmc, uint clock) { - int sdhc_clk = gd->sdhc_clk; int div, pre_div; struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; + int sdhc_clk = cfg->sdhc_clk; uint clk; if (clock < mmc->f_min) @@ -598,6 +598,7 @@ int fsl_esdhc_mmc_init(bd_t *bis) cfg = malloc(sizeof(struct fsl_esdhc_cfg)); memset(cfg, 0, sizeof(struct fsl_esdhc_cfg)); cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR; + cfg->sdhc_clk = gd->sdhc_clk; return fsl_esdhc_initialize(bis, cfg); } diff --git a/drivers/mtd/nand/tegra_nand.c b/drivers/mtd/nand/tegra_nand.c index 5408c51..4d94cc6 100644 --- a/drivers/mtd/nand/tegra_nand.c +++ b/drivers/mtd/nand/tegra_nand.c @@ -219,6 +219,34 @@ static uint8_t read_byte(struct mtd_info *mtd) } /** + * Read len bytes from the chip into a buffer + * + * @param mtd MTD device structure + * @param buf buffer to store data to + * @param len number of bytes to read + * + * Read function for 8bit bus-width + */ +static void read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int i, s; + unsigned int reg; + struct nand_chip *chip = mtd->priv; + struct nand_drv *info = (struct nand_drv *)chip->priv; + + for (i = 0; i < len; i += 4) { + s = (len - i) > 4 ? 4 : len - i; + writel(CMD_PIO | CMD_RX | CMD_A_VALID | CMD_CE0 | + ((s - 1) << CMD_TRANS_SIZE_SHIFT) | CMD_GO, + &info->reg->command); + if (!nand_waitfor_cmd_completion(info->reg)) + puts("Command timeout during read_buf\n"); + reg = readl(&info->reg->resp); + memcpy(buf + i, ®, s); + } +} + +/** * Check NAND status to see if it is ready or not * * @param mtd MTD device structure @@ -317,6 +345,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, switch (command) { case NAND_CMD_READID: writel(NAND_CMD_READID, &info->reg->cmd_reg1); + writel(column & 0xFF, &info->reg->addr_reg1); writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_PIO | CMD_RX | ((4 - 1) << CMD_TRANS_SIZE_SHIFT) @@ -324,6 +353,12 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, &info->reg->command); info->pio_byte_index = 0; break; + case NAND_CMD_PARAM: + writel(NAND_CMD_PARAM, &info->reg->cmd_reg1); + writel(column & 0xFF, &info->reg->addr_reg1); + writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_CE0, + &info->reg->command); + break; case NAND_CMD_READ0: writel(NAND_CMD_READ0, &info->reg->cmd_reg1); writel(NAND_CMD_READSTART, &info->reg->cmd_reg2); @@ -976,6 +1011,7 @@ int tegra_nand_init(struct nand_chip *nand, int devnum) nand->options = LP_OPTIONS; nand->cmdfunc = nand_command; nand->read_byte = read_byte; + nand->read_buf = read_buf; nand->ecc.read_page = nand_read_page_hwecc; nand->ecc.write_page = nand_write_page_hwecc; nand->ecc.read_page_raw = nand_read_page_raw; diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c index bf280ba..c1c0134 100644 --- a/drivers/serial/serial_ns16550.c +++ b/drivers/serial/serial_ns16550.c @@ -34,7 +34,7 @@ DECLARE_GLOBAL_DATA_PTR; #if !defined(CONFIG_CONS_INDEX) -#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4) +#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 6) #error "Invalid console index value." #endif @@ -46,12 +46,16 @@ DECLARE_GLOBAL_DATA_PTR; #error "Console port 3 defined but not configured." #elif CONFIG_CONS_INDEX == 4 && !defined(CONFIG_SYS_NS16550_COM4) #error "Console port 4 defined but not configured." +#elif CONFIG_CONS_INDEX == 5 && !defined(CONFIG_SYS_NS16550_COM5) +#error "Console port 5 defined but not configured." +#elif CONFIG_CONS_INDEX == 6 && !defined(CONFIG_SYS_NS16550_COM6) +#error "Console port 6 defined but not configured." #endif /* Note: The port number specified in the functions is 1 based. * the array is 0 based. */ -static NS16550_t serial_ports[4] = { +static NS16550_t serial_ports[6] = { #ifdef CONFIG_SYS_NS16550_COM1 (NS16550_t)CONFIG_SYS_NS16550_COM1, #else @@ -68,7 +72,17 @@ static NS16550_t serial_ports[4] = { NULL, #endif #ifdef CONFIG_SYS_NS16550_COM4 - (NS16550_t)CONFIG_SYS_NS16550_COM4 + (NS16550_t)CONFIG_SYS_NS16550_COM4, +#else + NULL, +#endif +#ifdef CONFIG_SYS_NS16550_COM5 + (NS16550_t)CONFIG_SYS_NS16550_COM5, +#else + NULL, +#endif +#ifdef CONFIG_SYS_NS16550_COM6 + (NS16550_t)CONFIG_SYS_NS16550_COM6 #else NULL #endif @@ -243,6 +257,12 @@ struct serial_device eserial3_device = DECLARE_ESERIAL_FUNCTIONS(4); struct serial_device eserial4_device = INIT_ESERIAL_STRUCTURE(4, "eserial3"); +DECLARE_ESERIAL_FUNCTIONS(5); +struct serial_device eserial5_device = + INIT_ESERIAL_STRUCTURE(5, "eserial4"); +DECLARE_ESERIAL_FUNCTIONS(6); +struct serial_device eserial6_device = + INIT_ESERIAL_STRUCTURE(6, "eserial5"); __weak struct serial_device *default_serial_console(void) { @@ -254,6 +274,10 @@ __weak struct serial_device *default_serial_console(void) return &eserial3_device; #elif CONFIG_CONS_INDEX == 4 return &eserial4_device; +#elif CONFIG_CONS_INDEX == 5 + return &eserial5_device; +#elif CONFIG_CONS_INDEX == 6 + return &eserial6_device; #else #error "Bad CONFIG_CONS_INDEX." #endif @@ -273,4 +297,10 @@ void ns16550_serial_initialize(void) #if defined(CONFIG_SYS_NS16550_COM4) serial_register(&eserial4_device); #endif +#if defined(CONFIG_SYS_NS16550_COM5) + serial_register(&eserial5_device); +#endif +#if defined(CONFIG_SYS_NS16550_COM6) + serial_register(&eserial6_device); +#endif } diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 9f7794f..9c67b63 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -385,6 +385,13 @@ static u32 eorx, fgx, bgx; /* color pats */ static int cfb_do_flush_cache; +#ifdef CONFIG_CFB_CONSOLE_ANSI +static char ansi_buf[10]; +static int ansi_buf_size; +static int ansi_colors_need_revert; +static int ansi_cursor_hidden; +#endif + static const int video_font_draw_table8[] = { 0x00000000, 0x000000ff, 0x0000ff00, 0x0000ffff, 0x00ff0000, 0x00ff00ff, 0x00ffff00, 0x00ffffff, @@ -768,9 +775,97 @@ static void console_back(void) } } -static void console_newline(void) +#ifdef CONFIG_CFB_CONSOLE_ANSI + +static void console_clear(void) +{ +#ifdef VIDEO_HW_RECTFILL + video_hw_rectfill(VIDEO_PIXEL_SIZE, /* bytes per pixel */ + 0, /* dest pos x */ + video_logo_height, /* dest pos y */ + VIDEO_VISIBLE_COLS, /* frame width */ + VIDEO_VISIBLE_ROWS, /* frame height */ + bgx /* fill color */ + ); +#else + memsetl(CONSOLE_ROW_FIRST, CONSOLE_SIZE, bgx); +#endif +} + +static void console_cursor_fix(void) +{ + if (console_row < 0) + console_row = 0; + if (console_row >= CONSOLE_ROWS) + console_row = CONSOLE_ROWS - 1; + if (console_col < 0) + console_col = 0; + if (console_col >= CONSOLE_COLS) + console_col = CONSOLE_COLS - 1; +} + +static void console_cursor_up(int n) +{ + console_row -= n; + console_cursor_fix(); +} + +static void console_cursor_down(int n) +{ + console_row += n; + console_cursor_fix(); +} + +static void console_cursor_left(int n) +{ + console_col -= n; + console_cursor_fix(); +} + +static void console_cursor_right(int n) +{ + console_col += n; + console_cursor_fix(); +} + +static void console_cursor_set_position(int row, int col) +{ + if (console_row != -1) + console_row = row; + if (console_col != -1) + console_col = col; + console_cursor_fix(); +} + +static void console_previousline(int n) { - console_row++; + /* FIXME: also scroll terminal ? */ + console_row -= n; + console_cursor_fix(); +} + +static void console_swap_colors(void) +{ + eorx = fgx; + fgx = bgx; + bgx = eorx; + eorx = fgx ^ bgx; +} + +static inline int console_cursor_is_visible(void) +{ + return !ansi_cursor_hidden; +} +#else +static inline int console_cursor_is_visible(void) +{ + return 1; +} +#endif + +static void console_newline(int n) +{ + console_row += n; console_col = 0; /* Check if we need to scroll the terminal */ @@ -779,7 +874,7 @@ static void console_newline(void) console_scrollup(); /* Decrement row number */ - console_row--; + console_row = CONSOLE_ROWS - 1; } } @@ -788,11 +883,12 @@ static void console_cr(void) console_col = 0; } -void video_putc(const char c) +static void parse_putc(const char c) { static int nl = 1; - CURSOR_OFF; + if (console_cursor_is_visible()) + CURSOR_OFF; switch (c) { case 13: /* back to first column */ @@ -801,7 +897,7 @@ void video_putc(const char c) case '\n': /* next line */ if (console_col || (!console_col && nl)) - console_newline(); + console_newline(1); nl = 1; break; @@ -810,7 +906,7 @@ void video_putc(const char c) console_col &= ~0x0007; if (console_col >= CONSOLE_COLS) - console_newline(); + console_newline(1); break; case 8: /* backspace */ @@ -827,11 +923,225 @@ void video_putc(const char c) /* check for newline */ if (console_col >= CONSOLE_COLS) { - console_newline(); + console_newline(1); nl = 0; } } - CURSOR_SET; + + if (console_cursor_is_visible()) + CURSOR_SET; +} + +void video_putc(const char c) +{ +#ifdef CONFIG_CFB_CONSOLE_ANSI + int i; + + if (c == 27) { + for (i = 0; i < ansi_buf_size; ++i) + parse_putc(ansi_buf[i]); + ansi_buf[0] = 27; + ansi_buf_size = 1; + return; + } + + if (ansi_buf_size > 0) { + /* + * 0 - ESC + * 1 - [ + * 2 - num1 + * 3 - .. + * 4 - ; + * 5 - num2 + * 6 - .. + * - cchar + */ + int next = 0; + + int flush = 0; + int fail = 0; + + int num1 = 0; + int num2 = 0; + int cchar = 0; + + ansi_buf[ansi_buf_size++] = c; + + if (ansi_buf_size >= sizeof(ansi_buf)) + fail = 1; + + for (i = 0; i < ansi_buf_size; ++i) { + if (fail) + break; + + switch (next) { + case 0: + if (ansi_buf[i] == 27) + next = 1; + else + fail = 1; + break; + + case 1: + if (ansi_buf[i] == '[') + next = 2; + else + fail = 1; + break; + + case 2: + if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') { + num1 = ansi_buf[i]-'0'; + next = 3; + } else if (ansi_buf[i] != '?') { + --i; + num1 = 1; + next = 4; + } + break; + + case 3: + if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') { + num1 *= 10; + num1 += ansi_buf[i]-'0'; + } else { + --i; + next = 4; + } + break; + + case 4: + if (ansi_buf[i] != ';') { + --i; + next = 7; + } else + next = 5; + break; + + case 5: + if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') { + num2 = ansi_buf[i]-'0'; + next = 6; + } else + fail = 1; + break; + + case 6: + if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') { + num2 *= 10; + num2 += ansi_buf[i]-'0'; + } else { + --i; + next = 7; + } + break; + + case 7: + if ((ansi_buf[i] >= 'A' && ansi_buf[i] <= 'H') + || ansi_buf[i] == 'J' + || ansi_buf[i] == 'K' + || ansi_buf[i] == 'h' + || ansi_buf[i] == 'l' + || ansi_buf[i] == 'm') { + cchar = ansi_buf[i]; + flush = 1; + } else + fail = 1; + break; + } + } + + if (fail) { + for (i = 0; i < ansi_buf_size; ++i) + parse_putc(ansi_buf[i]); + ansi_buf_size = 0; + return; + } + + if (flush) { + if (!ansi_cursor_hidden) + CURSOR_OFF; + ansi_buf_size = 0; + switch (cchar) { + case 'A': + /* move cursor num1 rows up */ + console_cursor_up(num1); + break; + case 'B': + /* move cursor num1 rows down */ + console_cursor_down(num1); + break; + case 'C': + /* move cursor num1 columns forward */ + console_cursor_right(num1); + break; + case 'D': + /* move cursor num1 columns back */ + console_cursor_left(num1); + break; + case 'E': + /* move cursor num1 rows up at begin of row */ + console_previousline(num1); + break; + case 'F': + /* move cursor num1 rows down at begin of row */ + console_newline(num1); + break; + case 'G': + /* move cursor to column num1 */ + console_cursor_set_position(-1, num1-1); + break; + case 'H': + /* move cursor to row num1, column num2 */ + console_cursor_set_position(num1-1, num2-1); + break; + case 'J': + /* clear console and move cursor to 0, 0 */ + console_clear(); + console_cursor_set_position(0, 0); + break; + case 'K': + /* clear line */ + if (num1 == 0) + console_clear_line(console_row, + console_col, + CONSOLE_COLS-1); + else if (num1 == 1) + console_clear_line(console_row, + 0, console_col); + else + console_clear_line(console_row, + 0, CONSOLE_COLS-1); + break; + case 'h': + ansi_cursor_hidden = 0; + break; + case 'l': + ansi_cursor_hidden = 1; + break; + case 'm': + if (num1 == 0) { /* reset swapped colors */ + if (ansi_colors_need_revert) { + console_swap_colors(); + ansi_colors_need_revert = 0; + } + } else if (num1 == 7) { /* once swap colors */ + if (!ansi_colors_need_revert) { + console_swap_colors(); + ansi_colors_need_revert = 1; + } + } + break; + } + if (!ansi_cursor_hidden) + CURSOR_SET; + } + } else { + parse_putc(c); + } +#else + parse_putc(c); +#endif } void video_puts(const char *s) diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c index 47b336e..ace226c 100644 --- a/drivers/video/mxc_ipuv3_fb.c +++ b/drivers/video/mxc_ipuv3_fb.c @@ -45,7 +45,7 @@ static int mxcfb_unmap_video_memory(struct fb_info *fbi); /* graphics setup */ static GraphicDevice panel; -static struct fb_videomode *gmode; +static struct fb_videomode const *gmode; static uint8_t gdisp; static uint32_t gpixfmt; @@ -503,7 +503,7 @@ static struct fb_info *mxcfb_init_fbinfo(void) * @return Appropriate error code to the kernel common code */ static int mxcfb_probe(u32 interface_pix_fmt, uint8_t disp, - struct fb_videomode *mode) + struct fb_videomode const *mode) { struct fb_info *fbi; struct mxcfb_info *mxcfbi; @@ -619,7 +619,9 @@ void video_set_lut(unsigned int index, /* color number */ return; } -int ipuv3_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt) +int ipuv3_fb_init(struct fb_videomode const *mode, + uint8_t disp, + uint32_t pixfmt) { gmode = mode; gdisp = disp; diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 6e9aada..b6e48f8 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -169,9 +169,15 @@ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SERIAL_MULTI #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK (48000000) #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ +#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ +#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ +#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ +#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ +#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ /* I2C Configuration */ #define CONFIG_I2C @@ -193,11 +199,7 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \ 4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 } -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 -#define CONFIG_CONS_INDEX 1 +#define CONFIG_ENV_OVERWRITE 1 #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_ENV_IS_NOWHERE diff --git a/include/configs/colibri_t20_iris.h b/include/configs/colibri_t20_iris.h new file mode 100644 index 0000000..0e5f281 --- /dev/null +++ b/include/configs/colibri_t20_iris.h @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2012 Lucas Stach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "tegra20-common.h" + +/* Enable FDT support */ +#define CONFIG_DEFAULT_DEVICE_TREE tegra20-colibri_t20_iris +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE + +/* High-level configuration options */ +#define V_PROMPT "Tegra20 (Colibri) # " +#define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T20 on Iris" + +/* Board-specific serial config */ +#define CONFIG_TEGRA_ENABLE_UARTA +#define CONFIG_TEGRA_UARTA_SDIO1 +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE + +#define CONFIG_BOARD_EARLY_INIT_F + +/* SD/MMC support */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_TEGRA_MMC +#define CONFIG_CMD_MMC + +/* File system support */ +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT + +/* USB host support */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_ULPI +#define CONFIG_USB_ULPI_VIEWPORT +#define CONFIG_USB_STORAGE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 +#define CONFIG_CMD_USB + +/* USB networking support */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING + +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_TEGRA_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (SZ_2M) +#undef CONFIG_ENV_SIZE /* undef size from tegra20-common.h */ +#define CONFIG_ENV_SIZE (SZ_64K) + +/* Debug commands */ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CACHE + +#include "tegra-common-post.h" + +#endif /* __CONFIG_H */ diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 9371ec3..3be4929 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -43,6 +43,10 @@ #define MACH_TYPE_EB_CPUX9K2 1977 #define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2 + +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_DCACHE_OFF + /*--------------------------------------------------------------------------*/ #ifndef CONFIG_RAMBOOT #define CONFIG_SYS_TEXT_BASE 0x00000000 @@ -56,7 +60,6 @@ #define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1 #define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */ - #define CONFIG_BOOT_RETRY_TIME 30 #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/eco5pk.h b/include/configs/eco5pk.h new file mode 100644 index 0000000..b9ebf6a --- /dev/null +++ b/include/configs/eco5pk.h @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2012 8D Technologies inc. + * Based on mt_ventoux.h, original banner below: + * + * Copyright (C) 2011 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de. + * + * Copyright (C) 2009 TechNexion Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "tam3517-common.h" + +#undef CONFIG_USB_EHCI +#undef CONFIG_USB_EHCI_OMAP +#undef CONFIG_USB_OMAP3 +#undef CONFIG_CMD_USB + +/* Our console port is port3 */ +#undef CONFIG_CONS_INDEX +#undef CONFIG_SYS_NS16550_COM1 +#undef CONFIG_SERIAL1 + +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 + +#define MACH_TYPE_ECO5_PK 4017 +#define CONFIG_MACH_TYPE MACH_TYPE_ECO5_PK + +#define CONFIG_BOOTDELAY 10 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_AUTO_COMPLETE + +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "ECO5-PK # " +#define CONFIG_SYS_PROMPT V_PROMPT + +/* + * Set its own mtdparts, different from common + */ +#undef MTDIDS_DEFAULT +#undef MTDPARTS_DEFAULT +#define MTDIDS_DEFAULT "nand0=omap2-nand.0" +#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(xloader-nand)," \ + "1024k(uboot-nand),256k(params-nand)," \ + "5120k(kernel),-(ubifs)" + +/* + * The arithmetic in tam3517.h is wrong for us and the kernel gets overwritten. + */ +#undef CONFIG_ENV_OFFSET_REDUND +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ + CONFIG_SYS_ENV_SECT_SIZE) + +#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \ + "install_kernel=if dhcp $bootfile; then nand erase kernel;" \ + "nand write $fileaddr kernel; fi\0" \ + "mtdparts="MTDPARTS_DEFAULT"\0" \ + "serverip=192.168.142.60\0" + + +#endif /* __CONFIG_H */ diff --git a/include/configs/harmony.h b/include/configs/harmony.h index d582ae1..040bfe4 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -72,8 +72,11 @@ #define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sector size */ /* USB Host support */ +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_ULPI +#define CONFIG_USB_ULPI_VIEWPORT #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index 96c143e..bd000a7 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -15,6 +15,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <asm/arch/imx-regs.h> + /* High Level Configuration Options */ #define CONFIG_SYS_HZ 1000 @@ -41,8 +43,13 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_ADDR IMX_RAM_BASE +#define CONFIG_SYS_INIT_RAM_SIZE IMX_RAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* Memory Test */ #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE/2) diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index dcae537..225d359 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -96,7 +96,6 @@ /* * Eth Configs */ -#define CONFIG_HAS_ETH1 #define CONFIG_MII #define CONFIG_FEC_MXC diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 69937d8..d1f684c 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -73,7 +73,6 @@ #define CONFIG_DOS_PARTITION /* Eth Configs */ -#define CONFIG_HAS_ETH1 #define CONFIG_MII #define CONFIG_FEC_MXC diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 55efeb7..a1b27ce 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -58,7 +58,6 @@ #define CONFIG_DOS_PARTITION /* Eth Configs */ -#define CONFIG_HAS_ETH1 #define CONFIG_MII #define CONFIG_FEC_MXC @@ -222,6 +221,6 @@ #define CONFIG_SPLASH_SCREEN #define CONFIG_BMP_16BPP #define CONFIG_VIDEO_LOGO -#define CONFIG_IPUV3_CLK 133000000 +#define CONFIG_IPUV3_CLK 200000000 #endif /* __CONFIG_H */ diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index fbc5162..23562a8 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -50,6 +50,7 @@ #define CONFIG_MMC #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC +#define CONFIG_MMC_BOUNCE_BUFFER #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION @@ -164,6 +165,4 @@ #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ -#define CONFIG_SYS_DCACHE_OFF - #endif /* __CONFIG_H */ diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h index 247e8d6..bfb9cd4 100644 --- a/include/configs/mx6qsabre_common.h +++ b/include/configs/mx6qsabre_common.h @@ -45,6 +45,7 @@ #define CONFIG_MMC #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC +#define CONFIG_MMC_BOUNCE_BUFFER #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION @@ -86,7 +87,7 @@ "initrd_high=0xffffffff\0" \ "mmcdev=0\0" \ "mmcpart=1\0" \ - "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ @@ -168,8 +169,6 @@ #define CONFIG_OF_LIBFDT -#define CONFIG_SYS_DCACHE_OFF - #ifndef CONFIG_SYS_DCACHE_OFF #define CONFIG_CMD_CACHE #endif diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index a878dec..760f3ce 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -1,7 +1,7 @@ /* * Copyright (C) 2012 Freescale Semiconductor, Inc. * - * Configuration settings for the Freescale i.MX6Q SabreSD board. + * Configuration settings for the Freescale i.MX6Q SabreAuto board. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -15,6 +15,7 @@ #define CONFIG_MACH_TYPE 3529 #define CONFIG_MXC_UART_BASE UART4_BASE #define CONFIG_CONSOLE_DEV "ttymxc3" +#define CONFIG_MMCROOT "/dev/mmcblk0p2" #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) #include "mx6qsabre_common.h" diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index ec9ab26..b56d7ca 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -37,7 +37,7 @@ #define CONFIG_REVISION_TAG /* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MISC_INIT_R @@ -72,6 +72,7 @@ #define CONFIG_MMC #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC +#define CONFIG_MMC_BOUNCE_BUFFER #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION @@ -119,6 +120,19 @@ /* Miscellaneous commands */ #define CONFIG_CMD_BMODE +/* Framebuffer and LCD */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_IPUV3 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_LOGO +#define CONFIG_IPUV3_CLK 260000000 + /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 @@ -234,8 +248,6 @@ #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ -#define CONFIG_SYS_DCACHE_OFF - #ifndef CONFIG_SYS_DCACHE_OFF #define CONFIG_CMD_CACHE #endif diff --git a/include/configs/mx6qsabresd.h b/include/configs/mx6qsabresd.h index f2ce79e..771d129 100644 --- a/include/configs/mx6qsabresd.h +++ b/include/configs/mx6qsabresd.h @@ -20,6 +20,7 @@ #define CONFIG_MACH_TYPE 3980 #define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONSOLE_DEV "ttymxc0" +#define CONFIG_MMCROOT "/dev/mmcblk1p2" #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) #include "mx6qsabre_common.h" diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h new file mode 100644 index 0000000..8506604 --- /dev/null +++ b/include/configs/nokia_rx51.h @@ -0,0 +1,452 @@ +/* + * (C) Copyright 2011-2012 + * Pali Rohár <pali.rohar@gmail.com> + * + * (C) Copyright 2010 + * Alistair Buxton <a.j.buxton@gmail.com> + * + * Derived from Beagle Board code: + * (C) Copyright 2006-2008 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * Configuration settings for the Nokia RX-51 aka N900. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ + +#define CONFIG_OMAP /* in a TI OMAP core */ +#define CONFIG_OMAP34XX /* which is a 34XX */ +#define CONFIG_OMAP3430 /* which is in a 3430 */ +#define CONFIG_OMAP3_RX51 /* working with RX51 */ +#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ + +#define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51 + +/* + * Nokia X-Loader loading secondary image to address 0x80400000 + * NOLO loading boot image to random place, so it doesn't really + * matter what we set this to. We have to copy u-boot to this address + */ +#define CONFIG_SYS_TEXT_BASE 0x80008000 + +#define CONFIG_SDRC /* The chip has SDRC controller */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> +#include <asm/arch/mem.h> +#include <linux/stringify.h> + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R +#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */ + +#define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */ +#define CONFIG_INITRD_TAG /* enable passing initrd */ +#define CONFIG_REVISION_TAG /* enable passing revision tag*/ +#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_UBI_SIZE (512 << 10) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \ + (128 << 10)) + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 /* UART3 on RX-51 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION + +/* USB */ +#define CONFIG_MUSB_UDC +#define CONFIG_MUSB_HDC +#define CONFIG_USB_OMAP3 +#define CONFIG_TWL4030_USB + +/* USB device configuration */ +#define CONFIG_USB_DEVICE +#define CONFIG_USBD_VENDORID 0x0421 +#define CONFIG_USBD_PRODUCTID 0x01c8 +#define CONFIG_USBD_MANUFACTURER "Nokia" +#define CONFIG_USBD_PRODUCT_NAME "N900" + +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_NO_FLASH + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_EXT4 /* EXT4 Support */ +#define CONFIG_CMD_FAT /* FAT support */ + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_GPIO /* Enable gpio command */ + +#define CONFIG_CMDLINE_EDITING /* add command line history */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ + +#define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */ + +#ifdef ONENAND_SUPPORT + +#define CONFIG_CMD_ONENAND /* ONENAND support */ +#define CONFIG_CMD_MTDPARTS /* mtd parts support */ + +#ifdef UBIFS_SUPPORT +#define CONFIG_CMD_UBI /* UBI Support */ +#define CONFIG_CMD_UBIFS /* UBIFS Support */ +#endif + +#endif + +/* commands not needed from config_cmd_default.h */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#undef CONFIG_CMD_NFS /* NFS support */ +#undef CONFIG_CMD_SAVEENV /* saveenv */ +#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ + +#define CONFIG_OMAP3_SPI +#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_DRIVER_OMAP34XX_I2C + +/* + * TWL4030 + */ +#define CONFIG_TWL4030_POWER +#define CONFIG_TWL4030_LED +#define CONFIG_TWL4030_KEYPAD + +#define CONFIG_OMAP_GPIO +#define GPIO_SLIDE 71 + +/* + * Board ONENAND Info. + */ + +#define PART1_NAME "bootloader" +#define PART1_SIZE 128 +#define PART1_MULL 1024 +#define PART1_SUFF "k" +#define PART1_OFFS 0x00000000 +#define PART1_MASK 0x00000003 + +#define PART2_NAME "config" +#define PART2_SIZE 384 +#define PART2_MULL 1024 +#define PART2_SUFF "k" +#define PART2_OFFS 0x00020000 +#define PART2_MASK 0x00000000 + +#define PART3_NAME "log" +#define PART3_SIZE 256 +#define PART3_MULL 1024 +#define PART3_SUFF "k" +#define PART3_OFFS 0x00080000 +#define PART3_MASK 0x00000000 + +#define PART4_NAME "kernel" +#define PART4_SIZE 2 +#define PART4_MULL 1024*1024 +#define PART4_SUFF "m" +#define PART4_OFFS 0x000c0000 +#define PART4_MASK 0x00000000 + +#define PART5_NAME "initfs" +#define PART5_SIZE 2 +#define PART5_MULL 1024*1024 +#define PART5_SUFF "m" +#define PART5_OFFS 0x002c0000 +#define PART5_MASK 0x00000000 + +#define PART6_NAME "rootfs" +#define PART6_SIZE 257280 +#define PART6_MULL 1024 +#define PART6_SUFF "k" +#define PART6_OFFS 0x004c0000 +#define PART6_MASK 0x00000000 + +#ifdef ONENAND_SUPPORT + +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +#ifdef UBIFS_SUPPORT +#define CONFIG_RBTREE +#define CONFIG_LZO +#endif + +#define MTDIDS_DEFAULT "onenand0=onenand" +#define MTDPARTS_DEFAULT "mtdparts=onenand:" \ + __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \ + __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \ + __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \ + __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \ + __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \ + "-(" PART6_NAME ")" + +#endif + +/* Watchdog support */ +#define CONFIG_HW_WATCHDOG + +/* + * Framebuffer + */ +/* Video console */ +#define CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_CFB_CONSOLE_ANSI /* Enable ANSI escape codes in framebuffer */ +#define CONFIG_VIDEO_LOGO +#define VIDEO_FB_16BPP_PIXEL_SWAP +#define VIDEO_FB_16BPP_WORD_SWAP +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_SPLASH_SCREEN + +/* functions for cfb_console */ +#define VIDEO_KBD_INIT_FCT rx51_kp_init() +#define VIDEO_TSTC_FCT rx51_kp_tstc +#define VIDEO_GETC_FCT rx51_kp_getc +#ifndef __ASSEMBLY__ +int rx51_kp_init(void); +int rx51_kp_tstc(void); +int rx51_kp_getc(void); +#endif + +#ifndef MTDPARTS_DEFAULT +#define MTDPARTS_DEFAULT +#endif + +/* Environment information */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "usbtty=cdc_acm\0" \ + "stdin=vga\0" \ + "stdout=vga\0" \ + "stderr=vga\0" \ + "setcon=setenv stdin ${con};" \ + "setenv stdout ${con};" \ + "setenv stderr ${con}\0" \ + "sercon=setenv con serial; run setcon\0" \ + "usbcon=setenv con usbtty; run setcon\0" \ + "vgacon=setenv con vga; run setcon\0" \ + "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \ + "switchmmc=mmc dev ${mmcnum}\0" \ + "kernaddr=0x82008000\0" \ + "initrdaddr=0x84008000\0" \ + "scriptaddr=0x86008000\0" \ + "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \ + "${loadaddr} ${mmcfile}\0" \ + "kernload=setenv loadaddr ${kernaddr};" \ + "setenv mmcfile ${mmckernfile};" \ + "run fileload\0" \ + "initrdload=setenv loadaddr ${initrdaddr};" \ + "setenv mmcfile ${mmcinitrdfile};" \ + "run fileload\0" \ + "scriptload=setenv loadaddr ${scriptaddr};" \ + "setenv mmcfile ${mmcscriptfile};" \ + "run fileload\0" \ + "scriptboot=echo Running ${mmcscriptfile} from mmc " \ + "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \ + "kernboot=echo Booting ${mmckernfile} from mmc " \ + "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \ + "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\ + "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \ + "attachboot=echo Booting attached kernel image ...;" \ + "setenv setup_omap_atag 1;" \ + "bootm ${attkernaddr};" \ + "setenv setup_omap_atag\0" \ + "trymmcscriptboot=if run switchmmc; then " \ + "if run scriptload; then " \ + "run scriptboot;" \ + "fi;" \ + "fi\0" \ + "trymmckernboot=if run switchmmc; then " \ + "if run kernload; then " \ + "run kernboot;" \ + "fi;" \ + "fi\0" \ + "trymmckerninitrdboot=if run switchmmc; then " \ + "if run initrdload; then " \ + "if run kernload; then " \ + "run kerninitrdboot;" \ + "fi;" \ + "fi; " \ + "fi\0" \ + "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \ + "setenv mmckernfile uImage; run trymmckernboot\0" \ + "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \ + "setenv mmcpart 2; run trymmcpartboot;" \ + "setenv mmcpart 3; run trymmcpartboot;" \ + "setenv mmcpart 4; run trymmcpartboot\0" \ + "trymmcboot=if run switchmmc; then " \ + "setenv mmctype fat;" \ + "run trymmcallpartboot;" \ + "setenv mmctype ext2;" \ + "run trymmcallpartboot;" \ + "setenv mmctype ext4;" \ + "run trymmcallpartboot;" \ + "fi\0" \ + "emmcboot=setenv mmcnum 1; run trymmcboot\0" \ + "sdboot=setenv mmcnum 0; run trymmcboot\0" \ + "" + +#define CONFIG_PREBOOT \ + "if run slide; then true; else run attachboot; fi;" \ + "echo Extra commands:;" \ + "echo run sercon - Use serial port for control.;" \ + "echo run usbcon - Use usbtty for control.;" \ + "echo run vgacon - Use framebuffer/keyboard.;" \ + "echo run sdboot - Boot from SD card slot.;" \ + "echo run emmcboot - Boot internal eMMC memory.;" \ + "echo run attachboot - Boot attached kernel image.;" \ + "echo" + +#define CONFIG_BOOTCOMMAND \ + "run sdboot;" \ + "run emmcboot;" \ + "run attachboot;" \ + "echo" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "Nokia RX-51 # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/ + +/* default load address */ +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) + +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 + +/* + * FLASH and environment organization + */ + +#define CONFIG_ENV_IS_NOWHERE + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) + +/* + * Attached kernel image + */ + +#define SDRAM_SIZE 0x10000000 /* 256 MB */ +#define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE) + +#define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */ +#define KERNEL_OFFSET 0x40000 /* 256 kB */ +#define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET) +#define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE) + +/* Reserve protected RAM for attached kernel */ +#define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1) + +#endif /* __CONFIG_H */ diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index 0727a4c..74d3b94 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -81,6 +81,7 @@ #define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 9698c23..6835155 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -95,8 +95,6 @@ #endif #define BOOTCMDS_COMMON \ - "scriptaddr=0x400000\0" \ - \ "rootpart=1\0" \ \ "script_boot=" \ @@ -140,10 +138,36 @@ #endif +/* + * Memory layout for where various images get loaded by boot scripts: + * + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Put it above BOOTMAPSZ to eliminate conflicts. + * + * kernel_addr_r must be within the first 128M of RAM in order for the + * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will + * decompress itself to 0x8000 after the start of RAM, kernel_addr_r + * should not overlap that area, or the kernel will have to copy itself + * somewhere else before decompression. Similarly, the address of any other + * data passed to the kernel shouldn't overlap the start of RAM. Pushing + * this up to 16M allows for a sizable kernel to be decompressed below the + * compressed load address. + * + * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for + * the compressed kernel to be up to 16M too. + * + * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows + * for the FDT/DTB to be up to 1M, which is hopefully plenty. + */ +#define MEM_LAYOUT_ENV_SETTINGS \ + "scriptaddr=0x10000000\0" \ + "kernel_addr_r=0x01000000\0" \ + "fdt_addr_r=0x02000000\0" \ + "ramdisk_addr_r=0x02100000\0" \ + #define CONFIG_EXTRA_ENV_SETTINGS \ TEGRA_DEVICE_SETTINGS \ - "fdt_load=0x01000000\0" \ - "fdt_high=01100000\0" \ + MEM_LAYOUT_ENV_SETTINGS \ BOOTCMDS_COMMON /* overrides for SPL build here */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index dc7444d..15bd9bb 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -169,8 +169,11 @@ #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_TEXT_BASE 0x0010c000 +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ + #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ @@ -184,9 +187,13 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_RAM_DEVICE +#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x00108000 -#define CONFIG_SPL_MAX_SIZE 0x00004000 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SYS_TEXT_BASE - \ + CONFIG_SPL_TEXT_BASE) #define CONFIG_SYS_SPL_MALLOC_START 0x00090000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 #define CONFIG_SPL_STACK 0x000ffffc @@ -198,5 +205,6 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds" #define CONFIG_SYS_NAND_SELF_INIT +#define CONFIG_SYS_NAND_ONFI_DETECTION #endif /* __TEGRA20_COMMON_H */ diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index 4e321e7..47d2fe4 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -167,6 +167,7 @@ struct fsl_esdhc_cfg { u32 esdhc_base; + u32 sdhc_clk; }; /* Select the correct accessors depending on endianess */ diff --git a/include/ipu_pixfmt.h b/include/ipu_pixfmt.h index 4baa711..1163bf4 100644 --- a/include/ipu_pixfmt.h +++ b/include/ipu_pixfmt.h @@ -76,7 +76,9 @@ #define IPU_PIX_FMT_YVU422P fourcc('Y', 'V', '1', '6') /*< 16 YVU 4:2:2 */ #define IPU_PIX_FMT_YUV422P fourcc('4', '2', '2', 'P') /*< 16 YUV 4:2:2 */ -int ipuv3_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt); +int ipuv3_fb_init(struct fb_videomode const *mode, + uint8_t disp, + uint32_t pixfmt); void ipuv3_fb_shutdown(void); #endif diff --git a/include/twl4030.h b/include/twl4030.h index 9cd32ab..0c17f59 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -151,6 +151,103 @@ #define TWL4030_PM_MASTER_SW_EVENTS_DEVSLP (1 << 1) #define TWL4030_PM_MASTER_SW_EVENTS_DEVOFF (1 << 0) +/* Power bus message definitions */ + +/* The TWL4030/5030 splits its power-management resources (the various + * regulators, clock and reset lines) into 3 processor groups - P1, P2 and + * P3. These groups can then be configured to transition between sleep, wait-on + * and active states by sending messages to the power bus. See Section 5.4.2 + * Power Resources of TWL4030 TRM + */ + +/* Processor groups */ +#define DEV_GRP_NULL 0x0 +#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */ +#define DEV_GRP_P2 0x2 /* P2: all Modem devices */ +#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */ + +/* Resource groups */ +#define RES_GRP_RES 0x0 /* Reserved */ +#define RES_GRP_PP 0x1 /* Power providers */ +#define RES_GRP_RC 0x2 /* Reset and control */ +#define RES_GRP_PP_RC 0x3 +#define RES_GRP_PR 0x4 /* Power references */ +#define RES_GRP_PP_PR 0x5 +#define RES_GRP_RC_PR 0x6 +#define RES_GRP_ALL 0x7 /* All resource groups */ + +#define RES_TYPE2_R0 0x0 + +#define RES_TYPE_ALL 0x7 + +/* Resource states */ +#define RES_STATE_WRST 0xF +#define RES_STATE_ACTIVE 0xE +#define RES_STATE_SLEEP 0x8 +#define RES_STATE_OFF 0x0 + +/* Power resources */ + +/* Power providers */ +#define RES_VAUX1 1 +#define RES_VAUX2 2 +#define RES_VAUX3 3 +#define RES_VAUX4 4 +#define RES_VMMC1 5 +#define RES_VMMC2 6 +#define RES_VPLL1 7 +#define RES_VPLL2 8 +#define RES_VSIM 9 +#define RES_VDAC 10 +#define RES_VINTANA1 11 +#define RES_VINTANA2 12 +#define RES_VINTDIG 13 +#define RES_VIO 14 +#define RES_VDD1 15 +#define RES_VDD2 16 +#define RES_VUSB_1V5 17 +#define RES_VUSB_1V8 18 +#define RES_VUSB_3V1 19 +#define RES_VUSBCP 20 +#define RES_REGEN 21 +/* Reset and control */ +#define RES_NRES_PWRON 22 +#define RES_CLKEN 23 +#define RES_SYSEN 24 +#define RES_HFCLKOUT 25 +#define RES_32KCLKOUT 26 +#define RES_RESET 27 +/* Power Reference */ +#define RES_Main_Ref 28 + +#define TOTAL_RESOURCES 28 +/* + * Power Bus Message Format ... these can be sent individually by Linux, + * but are usually part of downloaded scripts that are run when various + * power events are triggered. + * + * Broadcast Message (16 Bits): + * DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4] + * RES_STATE[3:0] + * + * Singular Message (16 Bits): + * DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0] + */ + +#define MSG_BROADCAST(devgrp, grp, type, type2, state) \ + ((devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \ + | (type) << 4 | (state)) + +#define MSG_SINGULAR(devgrp, id, state) \ + ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state)) + +#define MSG_BROADCAST_ALL(devgrp, state) \ + ((devgrp) << 5 | (state)) + +#define MSG_BROADCAST_REF MSG_BROADCAST_ALL +#define MSG_BROADCAST_PROV MSG_BROADCAST_ALL +#define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL + /* Power Managment Receiver */ #define TWL4030_PM_RECEIVER_SC_CONFIG 0x5B #define TWL4030_PM_RECEIVER_SC_DETECT1 0x5C @@ -311,6 +408,7 @@ #define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_30 0x02 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_32 0x03 +#define TWL4030_PM_RECEIVER_VSIM_VSEL_18 0x03 /* Device Selection in PM Receiver Module */ #define TWL4030_PM_RECEIVER_DEV_GRP_P1 0x20 diff --git a/tools/imximage.c b/tools/imximage.c index 03a7716..63f88b6 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -71,6 +71,8 @@ static uint32_t imximage_version; static set_dcd_val_t set_dcd_val; static set_dcd_rst_t set_dcd_rst; static set_imx_hdr_t set_imx_hdr; +static uint32_t max_dcd_entries; +static uint32_t *header_size_ptr; static uint32_t get_cfg_value(char *token, char *name, int linenr) { @@ -170,13 +172,6 @@ static void set_dcd_rst_v1(struct imx_header *imxhdr, uint32_t dcd_len, { dcd_v1_t *dcd_v1 = &imxhdr->header.hdr_v1.dcd_table; - if (dcd_len > MAX_HW_CFG_SIZE_V1) { - fprintf(stderr, "Error: %s[%d] -" - "DCD table exceeds maximum size(%d)\n", - name, lineno, MAX_HW_CFG_SIZE_V1); - exit(EXIT_FAILURE); - } - dcd_v1->preamble.barker = DCD_BARKER; dcd_v1->preamble.length = dcd_len * sizeof(dcd_type_addr_data_t); } @@ -190,13 +185,6 @@ static void set_dcd_rst_v2(struct imx_header *imxhdr, uint32_t dcd_len, { dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table; - if (dcd_len > MAX_HW_CFG_SIZE_V2) { - fprintf(stderr, "Error: %s[%d] -" - "DCD table exceeds maximum size(%d)\n", - name, lineno, MAX_HW_CFG_SIZE_V2); - exit(EXIT_FAILURE); - } - dcd_v2->header.tag = DCD_HEADER_TAG; dcd_v2->header.length = cpu_to_be16( dcd_len * sizeof(dcd_addr_data_t) + 8); @@ -208,84 +196,55 @@ static void set_dcd_rst_v2(struct imx_header *imxhdr, uint32_t dcd_len, } static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len, - struct stat *sbuf, - struct mkimage_params *params) + uint32_t entry_point, uint32_t flash_offset) { imx_header_v1_t *hdr_v1 = &imxhdr->header.hdr_v1; flash_header_v1_t *fhdr_v1 = &hdr_v1->fhdr; dcd_v1_t *dcd_v1 = &hdr_v1->dcd_table; - uint32_t base_offset; - - /* Exit if there is no BOOT_FROM field specifying the flash_offset */ - if(imxhdr->flash_offset == FLASH_OFFSET_UNDEFINED) { - fprintf(stderr, "Error: Header v1: No BOOT_FROM tag in %s\n", - params->imagename); - exit(EXIT_FAILURE); - } + uint32_t hdr_base; + uint32_t header_length = (((char *)&dcd_v1->addr_data[dcd_len].addr) + - ((char *)imxhdr)); /* Set magic number */ fhdr_v1->app_code_barker = APP_CODE_BARKER; - fhdr_v1->app_dest_ptr = params->addr; - fhdr_v1->app_dest_ptr = params->ep - imxhdr->flash_offset - - sizeof(struct imx_header); - fhdr_v1->app_code_jump_vector = params->ep; - - base_offset = fhdr_v1->app_dest_ptr + imxhdr->flash_offset ; - fhdr_v1->dcd_ptr_ptr = - (uint32_t) (offsetof(flash_header_v1_t, dcd_ptr) - - offsetof(flash_header_v1_t, app_code_jump_vector) + - base_offset); + hdr_base = entry_point - sizeof(struct imx_header); + fhdr_v1->app_dest_ptr = hdr_base - flash_offset; + fhdr_v1->app_code_jump_vector = entry_point; - fhdr_v1->dcd_ptr = base_offset + - offsetof(imx_header_v1_t, dcd_table); - - /* The external flash header must be at the end of the DCD table */ - dcd_v1->addr_data[dcd_len].type = sbuf->st_size + - imxhdr->flash_offset + - sizeof(struct imx_header); + fhdr_v1->dcd_ptr_ptr = hdr_base + offsetof(flash_header_v1_t, dcd_ptr); + fhdr_v1->dcd_ptr = hdr_base + offsetof(imx_header_v1_t, dcd_table); /* Security feature are not supported */ fhdr_v1->app_code_csf = 0; fhdr_v1->super_root_key = 0; + header_size_ptr = (uint32_t *)(((char *)imxhdr) + header_length - 4); } static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len, - struct stat *sbuf, - struct mkimage_params *params) + uint32_t entry_point, uint32_t flash_offset) { imx_header_v2_t *hdr_v2 = &imxhdr->header.hdr_v2; flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr; - - /* Exit if there is no BOOT_FROM field specifying the flash_offset */ - if(imxhdr->flash_offset == FLASH_OFFSET_UNDEFINED) { - fprintf(stderr, "Error: Header v2: No BOOT_FROM tag in %s\n", - params->imagename); - exit(EXIT_FAILURE); - } + uint32_t hdr_base; /* Set magic number */ fhdr_v2->header.tag = IVT_HEADER_TAG; /* 0xD1 */ fhdr_v2->header.length = cpu_to_be16(sizeof(flash_header_v2_t)); fhdr_v2->header.version = IVT_VERSION; /* 0x40 */ - fhdr_v2->entry = params->ep; + fhdr_v2->entry = entry_point; fhdr_v2->reserved1 = fhdr_v2->reserved2 = 0; - fhdr_v2->self = params->ep - sizeof(struct imx_header); - - fhdr_v2->dcd_ptr = fhdr_v2->self + - offsetof(imx_header_v2_t, dcd_table); + fhdr_v2->self = hdr_base = entry_point - sizeof(struct imx_header); - fhdr_v2->boot_data_ptr = fhdr_v2->self + - offsetof(imx_header_v2_t, boot_data); - - hdr_v2->boot_data.start = fhdr_v2->self - imxhdr->flash_offset; - hdr_v2->boot_data.size = sbuf->st_size + - imxhdr->flash_offset + - sizeof(struct imx_header); + fhdr_v2->dcd_ptr = hdr_base + offsetof(imx_header_v2_t, dcd_table); + fhdr_v2->boot_data_ptr = hdr_base + + offsetof(imx_header_v2_t, boot_data); + hdr_v2->boot_data.start = hdr_base - flash_offset; /* Security feature are not supported */ fhdr_v2->csf = 0; + header_size_ptr = &hdr_v2->boot_data.size; } static void set_hdr_func(struct imx_header *imxhdr) @@ -295,11 +254,13 @@ static void set_hdr_func(struct imx_header *imxhdr) set_dcd_val = set_dcd_val_v1; set_dcd_rst = set_dcd_rst_v1; set_imx_hdr = set_imx_hdr_v1; + max_dcd_entries = MAX_HW_CFG_SIZE_V1; break; case IMXIMAGE_V2: set_dcd_val = set_dcd_val_v2; set_dcd_rst = set_dcd_rst_v2; set_imx_hdr = set_imx_hdr_v2; + max_dcd_entries = MAX_HW_CFG_SIZE_V2; break; default: err_imximage_version(imximage_version); @@ -426,8 +387,15 @@ static void parse_cfg_fld(struct imx_header *imxhdr, int32_t *cmd, value = get_cfg_value(token, name, lineno); (*set_dcd_val)(imxhdr, name, lineno, fld, value, *dcd_len); - if (fld == CFG_REG_VALUE) + if (fld == CFG_REG_VALUE) { (*dcd_len)++; + if (*dcd_len > max_dcd_entries) { + fprintf(stderr, "Error: %s[%d] -" + "DCD table exceeds maximum size(%d)\n", + name, lineno, max_dcd_entries); + exit(EXIT_FAILURE); + } + } break; default: break; @@ -480,6 +448,11 @@ static uint32_t parse_cfg_file(struct imx_header *imxhdr, char *name) (*set_dcd_rst)(imxhdr, dcd_len, name, lineno); fclose(fd); + /* Exit if there is no BOOT_FROM field specifying the flash_offset */ + if (imxhdr->flash_offset == FLASH_OFFSET_UNDEFINED) { + fprintf(stderr, "Error: No BOOT_FROM tag in %s\n", name); + exit(EXIT_FAILURE); + } return dcd_len; } @@ -541,7 +514,8 @@ static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd, dcd_len = parse_cfg_file(imxhdr, params->imagename); /* Set the imx header */ - (*set_imx_hdr)(imxhdr, dcd_len, sbuf, params); + (*set_imx_hdr)(imxhdr, dcd_len, params->ep, imxhdr->flash_offset); + *header_size_ptr = sbuf->st_size + imxhdr->flash_offset; } int imximage_check_params(struct mkimage_params *params) diff --git a/tools/imximage.h b/tools/imximage.h index 34f293d..42b6090 100644 --- a/tools/imximage.h +++ b/tools/imximage.h @@ -168,9 +168,7 @@ typedef void (*set_dcd_rst_t)(struct imx_header *imxhdr, uint32_t dcd_len, char *name, int lineno); -typedef void (*set_imx_hdr_t)(struct imx_header *imxhdr, - uint32_t dcd_len, - struct stat *sbuf, - struct mkimage_params *params); +typedef void (*set_imx_hdr_t)(struct imx_header *imxhdr, uint32_t dcd_len, + uint32_t entry_point, uint32_t flash_offset); #endif /* _IMXIMAGE_H_ */ |