diff options
-rw-r--r-- | board/freescale/mx53_smd/mx53_smd.c | 92 | ||||
-rw-r--r-- | cpu/arm_cortexa8/mx53/generic.c | 40 | ||||
-rw-r--r-- | include/configs/mx53_smd_android.h | 13 |
3 files changed, 53 insertions, 92 deletions
diff --git a/board/freescale/mx53_smd/mx53_smd.c b/board/freescale/mx53_smd/mx53_smd.c index f3a5bb2..73dc165 100644 --- a/board/freescale/mx53_smd/mx53_smd.c +++ b/board/freescale/mx53_smd/mx53_smd.c @@ -70,6 +70,7 @@ #include <linux/mtd/partitions.h> #include <ubi_uboot.h> #include <jffs2/load_kernel.h> +#define GPIO_VOL_DN_KEY 14 #endif DECLARE_GLOBAL_DATA_PTR; @@ -1286,100 +1287,27 @@ int board_init(void) int check_recovery_cmd_file(void) { - disk_partition_t info; int button_pressed = 0; - ulong part_length; - int filelen = 0; - char *env; + int recovery_mode = 0; u32 reg; - int i; - /* For test only */ - /* When detecting android_recovery_switch, - * enter recovery mode directly */ - env = getenv("android_recovery_switch"); - if (!strcmp(env, "1")) { - printf("Env recovery detected!\nEnter recovery mode!\n"); - return 1; - } + /* Enter Recovery Mode if Recovery Switch is set. */ + recovery_mode = check_and_clean_recovery_flag(); - printf("Checking for recovery command file...\n"); - switch (get_boot_device()) { - case MMC_BOOT: - case SD_BOOT: - { - for (i = 0; i < 2; i++) { - block_dev_desc_t *dev_desc = NULL; - struct mmc *mmc = find_mmc_device(i); - - dev_desc = get_dev("mmc", i); - - if (NULL == dev_desc) { - printf("** Block device MMC %d not supported\n", i); - continue; - } - - mmc_init(mmc); - - if (get_partition_info(dev_desc, - CONFIG_ANDROID_CACHE_PARTITION_MMC, - &info)) { - printf("** Bad partition %d **\n", - CONFIG_ANDROID_CACHE_PARTITION_MMC); - continue; - } - - part_length = ext2fs_set_blk_dev(dev_desc, - CONFIG_ANDROID_CACHE_PARTITION_MMC); - if (part_length == 0) { - printf("** Bad partition - mmc %d:%d **\n", i, - CONFIG_ANDROID_CACHE_PARTITION_MMC); - ext2fs_close(); - continue; - } - - if (!ext2fs_mount(part_length)) { - printf("** Bad ext2 partition or " - "disk - mmc %d:%d **\n", - i, CONFIG_ANDROID_CACHE_PARTITION_MMC); - ext2fs_close(); - continue; - } - - filelen = ext2fs_open(CONFIG_ANDROID_RECOVERY_CMD_FILE); - - ext2fs_close(); - break; - } - } - break; - case NAND_BOOT: - return 0; - break; - case SPI_NOR_BOOT: - return 0; - break; - case UNKNOWN_BOOT: - default: - return 0; - break; - } - - /* Check Recovery Combo Button press or not. - * @TODO: Need At least Two key, but in SMD board, - * only can use one Volume key. */ + /* Check Recovery Combo Button press or not. */ mxc_request_iomux(MX53_PIN_ATA_DATA14, IOMUX_CONFIG_ALT1); + /* Set GPIO direction to INPUT */ reg = readl(GPIO2_BASE_ADDR + GPIO_GDIR); - reg &= ~(1<<14); + reg &= ~(1 << GPIO_VOL_DN_KEY); writel(reg, GPIO2_BASE_ADDR + GPIO_GDIR); + /* Read GPIO status */ reg = readl(GPIO2_BASE_ADDR + GPIO_PSR); - if (!(reg & (1 << 14))) { /* Vol - is low assert */ + if (!(reg & (1 << GPIO_VOL_DN_KEY))) { /* Vol - is low assert */ button_pressed = 1; printf("Recovery key pressed\n"); } - return (filelen > 0 || button_pressed); - + return recovery_mode || button_pressed; } #endif diff --git a/cpu/arm_cortexa8/mx53/generic.c b/cpu/arm_cortexa8/mx53/generic.c index 7a6d95e..83dbd4b 100644 --- a/cpu/arm_cortexa8/mx53/generic.c +++ b/cpu/arm_cortexa8/mx53/generic.c @@ -1213,12 +1213,48 @@ struct reco_envs supported_reco_envs[BOOT_DEV_NUM] = { }; #endif -#ifdef CONFIG_FASTBOOT +#ifdef CONFIG_ANDROID_RECOVERY +#define ANDROID_RECOVERY_BOOT (1 << 27) /* check if the recovery bit is set by kernel, it can be set by kernel + * issue a command '# reboot recovery' */ +int check_and_clean_recovery_flag(void) +{ + int flag_set = 0; + u32 reg; + reg = readl(SRTC_BASE_ADDR + SRTC_LPGR); + + flag_set = !!(reg & ANDROID_RECOVERY_BOOT); + + /* clean it in case looping infinite here.... */ + if (flag_set) { + printf("Recovery flag is set...\n"); + reg &= ~ANDROID_RECOVERY_BOOT; + writel(reg, SRTC_BASE_ADDR + SRTC_LPGR); + } + + return flag_set; +} +#endif + +#ifdef CONFIG_FASTBOOT +#define ANDROID_FASTBOOT_BOOT (1 << 26) +/* check if the fastboot bit is set by kernel, it can be set by kernel * issue a command '# reboot fastboot' */ int fastboot_check_and_clean_flag(void) { - return 0; + int flag_set = 0; + u32 reg; + reg = readl(SRTC_BASE_ADDR + SRTC_LPGR); + + flag_set = !!(reg & ANDROID_FASTBOOT_BOOT); + + /* clean it in case looping infinite here.... */ + if (flag_set) { + reg &= ~ANDROID_FASTBOOT_BOOT; + writel(reg, SRTC_BASE_ADDR + SRTC_LPGR); + } + + return flag_set; } #endif diff --git a/include/configs/mx53_smd_android.h b/include/configs/mx53_smd_android.h index 704619e..e6ce3ef 100644 --- a/include/configs/mx53_smd_android.h +++ b/include/configs/mx53_smd_android.h @@ -94,8 +94,8 @@ #define CONFIG_FASTBOOT_INTERFACE_STR "Android fastboot" #define CONFIG_FASTBOOT_SERIAL_NUM "12345" #define CONFIG_FASTBOOT_SATA_NO 0 -#define CONFIG_FASTBOOT_TRANSFER_BUF 0x80000000 -#define CONFIG_FASTBOOT_TRANSFER_BUF_SIZE 0x9400000 /* 148M byte */ +#define CONFIG_FASTBOOT_TRANSFER_BUF 0x78000000 +#define CONFIG_FASTBOOT_TRANSFER_BUF_SIZE 0x14000000 /* 320M byte */ #define CONFIG_CMD_BOOTI #define CONFIG_ANDROID_RECOVERY @@ -104,12 +104,9 @@ #define CONFIG_MTD_PARTITIONS #define CONFIG_TIMESTAMP -#define CONFIG_ANDROID_RECOVERY_BOOTARGS_MMC \ - "setenv bootargs ${bootargs} init=/init root=/dev/mmcblk0p4 rootfs=ext4 video=mxcdi1fb:RGB666,XGA ldb=di1 di1_primary" -#define CONFIG_ANDROID_RECOVERY_BOOTCMD_MMC \ - "run bootargs_base bootargs_android_recovery; " \ - "mmc dev 1 0; " \ - "mmc read ${loadaddr} 0x800 0x2000;bootm" +#define CONFIG_ANDROID_RECOVERY_BOOTARGS_MMC NULL +#define CONFIG_ANDROID_RECOVERY_BOOTCMD_MMC \ + "booti mmc1 recovery" #define CONFIG_ANDROID_RECOVERY_CMD_FILE "/recovery/command" #define CONFIG_ANDROID_BOOT_PARTITION_MMC -1 |