summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rwxr-xr-xMAKEALL1
-rw-r--r--Makefile3
-rw-r--r--README22
-rw-r--r--board/mpc7448hpc2/Makefile52
-rw-r--r--board/mpc7448hpc2/asm_init.S918
-rw-r--r--board/mpc7448hpc2/config.mk28
-rw-r--r--board/mpc7448hpc2/mpc7448hpc2.c107
-rw-r--r--board/mpc7448hpc2/tsi108_init.c665
-rw-r--r--board/mpc7448hpc2/u-boot.lds136
-rw-r--r--cpu/74xx_7xx/cpu.c46
-rw-r--r--cpu/74xx_7xx/cpu_init.c1
-rw-r--r--cpu/74xx_7xx/speed.c56
-rw-r--r--doc/README.mpc7448hpc2185
-rw-r--r--drivers/Makefile6
-rw-r--r--drivers/tsi108_eth.c1036
-rw-r--r--drivers/tsi108_i2c.c298
-rw-r--r--drivers/tsi108_pci.c178
-rw-r--r--include/74xx_7xx.h2
-rw-r--r--include/asm-ppc/global_data.h3
-rw-r--r--include/configs/mpc7448hpc2.h411
-rw-r--r--include/tsi108.h221
-rw-r--r--lib_ppc/extable.c25
-rw-r--r--net/eth.c4
23 files changed, 4376 insertions, 28 deletions
diff --git a/MAKEALL b/MAKEALL
index 40a5c77..e0edcf9 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -153,6 +153,7 @@ LIST_85xx=" \
LIST_74xx=" \
DB64360 DB64460 EVB64260 P3G4 \
p3m7448 PCIPPC2 PCIPPC6 ZUMA \
+ mpc7448hpc2
"
LIST_7xx=" \
diff --git a/Makefile b/Makefile
index b1952ed..7924e80 100644
--- a/Makefile
+++ b/Makefile
@@ -1764,6 +1764,9 @@ EVB64260_config \
EVB64260_750CX_config: unconfig
@$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
+mpc7448hpc2_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2
+
P3G4_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
diff --git a/README b/README
index ecfd1f8..a8eaa5f 100644
--- a/README
+++ b/README
@@ -2371,17 +2371,17 @@ configurations; the following names are supported:
csb272_config lwmon_config sbc8260_config
CU824_config MBX860T_config sbc8560_33_config
DUET_ADS_config MBX_config sbc8560_66_config
- EBONY_config MPC8260ADS_config SM850_config
- ELPT860_config MPC8540ADS_config SPD823TS_config
- ESTEEM192E_config MPC8540EVAL_config stxgp3_config
- ETX094_config MPC8560ADS_config SXNI855T_config
- FADS823_config NETVIA_config TQM823L_config
- FADS850SAR_config omap1510inn_config TQM850L_config
- FADS860T_config omap1610h2_config TQM855L_config
- FPS850L_config omap1610inn_config TQM860L_config
- omap5912osk_config walnut_config
- omap2420h4_config Yukon8220_config
- ZPC1900_config
+ EBONY_config mpc7448hpc2_config SM850_config
+ ELPT860_config MPC8260ADS_config SPD823TS_config
+ ESTEEM192E_config MPC8540ADS_config stxgp3_config
+ ETX094_config MPC8540EVAL_config SXNI855T_config
+ FADS823_config NMPC8560ADS_config TQM823L_config
+ FADS850SAR_config NETVIA_config TQM850L_config
+ FADS860T_config omap1510inn_config TQM855L_config
+ FPS850L_config omap1610h2_config TQM860L_config
+ omap1610inn_config walnut_config
+ omap5912osk_config Yukon8220_config
+ omap2420h4_config ZPC1900_config
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for
diff --git a/board/mpc7448hpc2/Makefile b/board/mpc7448hpc2/Makefile
new file mode 100644
index 0000000..e3d757d
--- /dev/null
+++ b/board/mpc7448hpc2/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o tsi108_init.o
+SOBJS := asm_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+.PHONY: distclean
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude ($obj).depend
+
+#########################################################################
diff --git a/board/mpc7448hpc2/asm_init.S b/board/mpc7448hpc2/asm_init.S
new file mode 100644
index 0000000..a7a40a1
--- /dev/null
+++ b/board/mpc7448hpc2/asm_init.S
@@ -0,0 +1,918 @@
+/*
+ * (C) Copyright 2004-05; Tundra Semiconductor Corp.
+ *
+ * Added automatic detect of SDC settings
+ * Copyright (c) 2005 Freescale Semiconductor, Inc.
+ * Maintainer tie-fei.zang@freescale.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * FILENAME: asm_init.s
+ *
+ * Originator: Alex Bounine
+ *
+ * DESCRIPTION:
+ * Initialization code for the Tundra Tsi108 bridge chip
+ *
+ */
+
+#include <config.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/processor.h>
+
+#include <tsi108.h>
+
+/*
+ * Build Configuration Options
+ */
+
+/* #define DISABLE_PBM disables usage of PB Master */
+/* #define SDC_HARDCODED_INIT config SDRAM controller with hardcoded values */
+/* #define SDC_AUTOPRECH_EN enable SDRAM auto precharge */
+
+/*
+ * Hardcoded SDC settings
+ */
+
+#ifdef SDC_HARDCODED_INIT
+
+/* Micron MT9HTF6472AY-40EA1 : Unbuffered, 512MB, 400, CL3, Single Rank */
+
+#define VAL_SD_REFRESH (0x61A)
+#define VAL_SD_TIMING (0x0308336b)
+#define VAL_SD_D0_CTRL (0x07100021) /* auto-precharge disabled */
+#define VAL_SD_D0_BAR (0x0FE00000) /* 512MB @ 0x00000000 */
+#define VAL_SD_D1_CTRL (0x07100021) /* auto-precharge disabled */
+#define VAL_SD_D1_BAR (0x0FE00200) /* 512MB @ 0x20000000 */
+
+#endif /* SDC_HARDCODED_INIT */
+
+/*
+ CPU Configuration:
+
+ CPU Address and Data Parity enables.
+
+#define CPU_AP
+#define CPU_DP
+*/
+
+/*
+ * Macros
+ * !!! Attention !!! Macros LOAD_PTR, LOAD_U32 and LOAD_MEM defined below are
+ * expected to work correctly for the CSR space within 32KB range.
+ *
+ * LOAD_PTR and LOAD_U32 - load specified register with a 32 bit constant.
+ * These macros are absolutely identical except their names. This difference
+ * is provided intentionally for better readable code.
+ */
+
+#define LOAD_PTR(reg,const32) \
+ addis reg,r0,const32@h; ori reg,reg,const32@l
+
+#define LOAD_U32(reg,const32) \
+ addis reg,r0,const32@h; ori reg,reg,const32@l
+
+/* LOADMEM initializes a register with the contents of a specified 32-bit
+ * memory location, usually a CSR value.
+ */
+
+#define LOAD_MEM(reg,addr32) \
+ addis reg,r0,addr32@ha; lwz reg,addr32@l(reg)
+
+#ifndef SDC_HARDCODED_INIT
+sdc_clk_sync:
+ /* MHz: 0,0,183,100,133,167,200,233 */
+ .long 0, 0, 6, 10, 8, 6, 5, 4 /* nSec */
+#endif
+
+/*
+ * board_asm_init() - early initialization function. Coded to be portable to
+ * dual-CPU configuration.
+ * Checks CPU number and performs board HW initialization if called for CPU0.
+ * Registers used: r3,r4,r5,r6,r19,r29
+ *
+ * NOTE: For dual-CPU configuration only CPU0 is allowed to configure Tsi108
+ * and the rest of the board. Current implementation demonstrates two
+ * possible ways to identify CPU number:
+ * - for MPC74xx platform: uses MSSCR0[ID] bit as defined in UM.
+ * - for PPC750FX/GX boards: uses WHO_AM_I bit reported by Tsi108.
+ */
+
+ .globl board_asm_init
+board_asm_init:
+ mflr r19 /* Save LR to be able return later. */
+ bl icache_enable /* Enable icache to reduce reads from flash. */
+
+/* Initialize pointer to Tsi108 register space */
+
+ LOAD_PTR(r29,CFG_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */
+ ori r4,r29,TSI108_PB_REG_OFFSET
+
+/* Check Processor Version Number */
+
+ mfspr r3, PVR
+ rlwinm r3,r3,16,16,23 /* get ((Processor Version Number) & 0xFF00) */
+
+ cmpli 0,0,r3,0x8000 /* MPC74xx */
+ bne cont_brd_init
+
+ /*
+ * For MPC744x/5x enable extended BATs[4-7]
+ * Sri: Set HIGH_BAT_EN and XBSEN, and SPD =1
+ * to disable prefetch
+ */
+
+ mfspr r5, HID0
+ oris r5, r5, 0x0080 /* Set HID0[HIGH_BAT_EN] bit #8 */
+ ori r5, r5, 0x0380 /* Set SPD,XBSEN,SGE bits #22,23,24 */
+ mtspr HID0, r5
+ isync
+ sync
+
+ /* Adding code to disable external interventions in MPX bus mode */
+ mfspr r3, 1014
+ oris r3, r3, 0x0100 /* Set the EIDIS bit in MSSCR0: bit 7 */
+ mtspr 1014, r3
+ isync
+ sync
+
+ /* Sri: code to enable FP unit */
+ mfmsr r3
+ ori r3, r3, 0x2000
+ mtmsr r3
+ isync
+ sync
+
+ /* def CONFIG_DUAL_CPU
+ * For MPC74xx processor, use MSSCR0[ID] bit to identify CPU number.
+ */
+#if(1)
+ mfspr r3,1014 /* read MSSCR0 */
+ rlwinm. r3,r3,27,31,31 /* get processor ID number */
+ mtspr SPRN_PIR,r3 /* Save CPU ID */
+ sync
+ bne init_done
+ b do_tsi108_init
+
+cont_brd_init:
+
+ /* An alternative method of checking the processor number (in addition
+ * to configuration using MSSCR0[ID] bit on MPC74xx).
+ * Good for IBM PPC750FX/GX.
+ */
+
+ lwz r3,PB_BUS_MS_SELECT(r4) /* read PB_ID register */
+ rlwinm. r3,r3,24,31,31 /* get processor ID number */
+ bne init_done
+#else
+
+cont_brd_init:
+
+#endif /* CONFIG_DUAL_CPU */
+
+ /* Initialize Tsi108 chip */
+
+do_tsi108_init:
+
+ /*
+ * Adjust HLP/Flash parameters. By default after reset the HLP port is
+ * set to support slow devices. Better performance can be achived when
+ * an optimal parameters are used for specific EPROM device.
+ * NOTE: This should be performed ASAP for the emulation platform
+ * because it has 5MHz HLP clocking.
+ */
+
+#ifdef CONFIG_TSI108EMU
+ ori r4,r29,TSI108_HLP_REG_OFFSET
+ LOAD_U32(r5,0x434422c0)
+ stw r5,0x08(r4) /* set HLP B0_CTRL0 */
+ sync
+ LOAD_U32(r5,0xd0012000)
+ stw r5,0x0c(r4) /* set HLP B0_CTRL1 */
+ sync
+#endif
+
+ /* Initialize PB interface. */
+
+ ori r4,r29,TSI108_PB_REG_OFFSET
+
+#if (CFG_TSI108_CSR_BASE != CFG_TSI108_CSR_RST_BASE)
+ /* Relocate (if required) Tsi108 registers. Set new value for
+ * PB_REG_BAR:
+ * Note we are in the 32-bit address mode.
+ */
+ LOAD_U32(r5,(CFG_TSI108_CSR_BASE | 0x01)) /* PB_REG_BAR: BA + EN */
+ stw r5,PB_REG_BAR(r4)
+ andis. r29,r5,0xFFFF
+ sync
+ ori r4,r29,TSI108_PB_REG_OFFSET
+#endif
+
+ /* Set PB Slave configuration register */
+
+ LOAD_U32(r5,0x00002481) /* PB_SCR: TEA enabled,AACK delay = 1 */
+ lwz r3, PB_RSR(r4) /* get PB bus mode */
+ xori r3,r3,0x0001 /* mask PB_BMODE: r3 -> (0 = 60X, 1 = MPX) */
+ rlwimi r5,r3,14,17,17 /* for MPX: set DTI_MODE bit */
+ stw r5,PB_SCR(r4)
+ sync
+
+ /* Configure PB Arbiter */
+
+ lwz r5,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */
+ li r3, 0x00F0 /* ARB_PIPELINE_DEP mask */
+#ifdef DISABLE_PBM
+ ori r3,r3,0x1000 /* add PBM_EN to clear (enabled by default) */
+#endif
+ andc r5,r5,r3 /* Clear the masked bit fields */
+ ori r5,r5,0x0001 /* Set pipeline depth */
+ stw r5,PB_ARB_CTRL(r4)
+
+#if (0) /* currently using the default settings for PBM after reset */
+ LOAD_U32(r5,0x) /* value for PB_MCR */
+ stw r5,PB_MCR(r4)
+ sync
+
+ LOAD_U32(r5,0x) /* value for PB_MCMD */
+ stw r5,PB_MCMD(r4)
+ sync
+#endif
+
+ /* Disable or enable PVT based on processor bus frequency
+ * 1. Read CG_PWRUP_STATUS register field bits 18,17,16
+ * 2. See if the value is < or > 133mhz (18:16 = 100)
+ * 3. If > enable PVT
+ */
+
+ LOAD_U32(r3,0xC0002234)
+ lwz r3,0(r3)
+ rlwinm r3,r3,16,29,31
+
+ cmpi 0,0,r3,0x0004
+ bgt sdc_init
+
+#ifndef CONFIG_TSI108EMU
+ /* FIXME: Disable PB calibration control for any real Tsi108 board */
+ li r5,0x0101 /* disable calibration control */
+ stw r5,PB_PVT_CTRL2(r4)
+ sync
+#endif
+
+ /* Initialize SDRAM controller. */
+
+sdc_init:
+
+#ifndef SDC_HARDCODED_INIT
+ /* get SDC clock prior doing sdram controller autoconfig */
+ ori r4,r29,TSI108_CLK_REG_OFFSET /* r4 - ptr to CG registers */
+ lwz r3, CG_PWRUP_STATUS(r4) /* get CG configuration */
+ rlwinm r3,r3,12,29,31 /* r3 - SD clk */
+ lis r5,sdc_clk_sync@h
+ ori r5,r5,sdc_clk_sync@l
+ /* Sri: At this point check if r3 = 001. If yes,
+ * the memory frequency should be same as the
+ * MPX bus frequency
+ */
+ cmpi 0,0,r3,0x0001
+ bne get_nsec
+ lwz r6, CG_PWRUP_STATUS(r4)
+ rlwinm r6,r6,16,29,31
+ mr r3,r6
+
+get_nsec:
+ rlwinm r3,r3,2,0,31
+ lwzx r9,r5,r3 /* get SD clk rate in nSec */
+ /* ATTN: r9 will be used by SPD routine */
+#endif /* !SDC_HARDCODED_INIT */
+
+ ori r4,r29,TSI108_SD_REG_OFFSET /* r4 - ptr to SDRAM registers */
+
+ /* Initialize SDRAM controller. SDRAM Size = 512MB, One DIMM. */
+
+ LOAD_U32(r5,0x00)
+ stw r5,SD_INT_ENABLE(r4) /* Ensure that interrupts are disabled */
+#ifdef ENABLE_SDRAM_ECC
+ li r5, 0x01
+#endif /* ENABLE_SDRAM_ECC */
+ stw r5,SD_ECC_CTRL(r4) /* Enable/Disable ECC */
+ sync
+
+#ifdef SDC_HARDCODED_INIT /* config sdram controller with hardcoded values */
+
+ /* First read the CG_PWRUP_STATUS register to get the
+ * memory speed from bits 22,21,20
+ */
+
+ LOAD_U32(r3,0xC0002234)
+ lwz r3,0(r3)
+ rlwinm r3,r3,12,29,31
+
+ /* Now first check for 166, then 200, or default */
+
+ cmpi 0,0,r3,0x0005
+ bne check_for_200mhz
+
+ /* set values for 166 Mhz memory speed
+ * Set refresh rate and timing parameters
+ */
+ LOAD_U32(r5,0x00000515)
+ stw r5,SD_REFRESH(r4)
+ LOAD_U32(r5,0x03073368)
+ stw r5,SD_TIMING(r4)
+ sync
+
+ /* Initialize DIMM0 control and BAR registers */
+ LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
+#endif
+ stw r5,SD_D0_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D0_BAR)
+ stw r5,SD_D0_BAR(r4)
+ sync
+
+ /* Initialize DIMM1 control and BAR registers
+ * (same as dimm 0, next 512MB, disabled)
+ */
+ LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
+#endif
+ stw r5,SD_D1_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D1_BAR)
+ stw r5,SD_D1_BAR(r4)
+ sync
+
+ b sdc_init_done
+
+check_for_200mhz:
+
+ cmpi 0,0,r3,0x0006
+ bne set_default_values
+
+ /* set values for 200Mhz memory speed
+ * Set refresh rate and timing parameters
+ */
+ LOAD_U32(r5,0x0000061a)
+ stw r5,SD_REFRESH(r4)
+ LOAD_U32(r5,0x03083348)
+ stw r5,SD_TIMING(r4)
+ sync
+
+ /* Initialize DIMM0 control and BAR registers */
+ LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
+#endif
+ stw r5,SD_D0_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D0_BAR)
+ stw r5,SD_D0_BAR(r4)
+ sync
+
+ /* Initialize DIMM1 control and BAR registers
+ * (same as dimm 0, next 512MB, disabled)
+ */
+ LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
+#endif
+ stw r5,SD_D1_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D1_BAR)
+ stw r5,SD_D1_BAR(r4)
+ sync
+
+ b sdc_init_done
+
+set_default_values:
+
+ /* Set refresh rate and timing parameters */
+ LOAD_U32(r5,VAL_SD_REFRESH)
+ stw r5,SD_REFRESH(r4)
+ LOAD_U32(r5,VAL_SD_TIMING)
+ stw r5,SD_TIMING(r4)
+ sync
+
+ /* Initialize DIMM0 control and BAR registers */
+ LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
+#endif
+ stw r5,SD_D0_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D0_BAR)
+ stw r5,SD_D0_BAR(r4)
+ sync
+
+ /* Initialize DIMM1 control and BAR registers
+ * (same as dimm 0, next 512MB, disabled)
+ */
+ LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
+#endif
+ stw r5,SD_D1_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D1_BAR)
+ stw r5,SD_D1_BAR(r4)
+ sync
+#else /* !SDC_HARDCODED_INIT */
+ bl tsi108_sdram_spd /* automatically detect SDC settings */
+#endif /* SDC_HARDCODED_INIT */
+
+sdc_init_done:
+
+#ifdef DISABLE_PBM
+ LOAD_U32(r5,0x00000030) /* PB_EN + OCN_EN */
+#else
+ LOAD_U32(r5,0x00000230) /* PB_EN + OCN_EN + PB/OCN=80/20 */
+#endif /* DISABLE_PBM */
+
+#ifdef CONFIG_TSI108EMU
+ oris r5,r5,0x0010 /* set EMULATION_MODE bit */
+#endif
+
+ stw r5,SD_CTRL(r4)
+ eieio
+ sync
+
+ /* Enable SDRAM access */
+
+ oris r5,r5,0x8000 /* start SDC: set SD_CTRL[ENABLE] bit */
+ stw r5,SD_CTRL(r4)
+ sync
+
+wait_init_complete:
+ lwz r5,SD_STATUS(r4)
+ andi. r5,r5,0x0001
+ /* wait until SDRAM initialization is complete */
+ beq wait_init_complete
+
+ /* Map SDRAM into the processor bus address space */
+
+ ori r4,r29,TSI108_PB_REG_OFFSET
+
+ /* Setup BARs associated with direct path PB<->SDRAM */
+
+ /* PB_SDRAM_BAR1:
+ * provides a direct path to the main system memory (cacheable SDRAM)
+ */
+
+ /* BA=0,Size=512MB, ENable, No Addr.Translation */
+ LOAD_U32(r5, 0x00000011)
+ stw r5,PB_SDRAM_BAR1(r4)
+ sync
+
+ /* Make sure that PB_SDRAM_BAR1 decoder is set
+ * (to allow following immediate read from SDRAM)
+ */
+ lwz r5,PB_SDRAM_BAR1(r4)
+ sync
+
+ /* PB_SDRAM_BAR2:
+ * provides non-cacheable alias (via the direct path) to main
+ * system memory.
+ * Size = 512MB, ENable, Addr.Translation - ON,
+ * BA = 0x0_40000000, TA = 0x0_00000000
+ */
+
+ LOAD_U32(r5, 0x40010011)
+ stw r5,PB_SDRAM_BAR2(r4)
+ sync
+
+ /* Make sure that PB_SDRAM_BAR2 decoder is set
+ * (to allow following immediate read from SDRAM)
+ */
+ lwz r5,PB_SDRAM_BAR2(r4)
+ sync
+
+init_done:
+
+ /* All done. Restore LR and return. */
+ mtlr r19
+ blr
+
+#if (0)
+ /*
+ * init_cpu1
+ * This routine enables CPU1 on the dual-processor system.
+ * Now there is only one processor in the system
+ */
+
+ .global enable_cpu1
+enable_cpu1:
+
+ lis r3,Tsi108_Base@ha /* Get Grendel CSR Base Addr */
+ addi r3,r3,Tsi108_Base@l
+ lwz r3,0(r3) /* R3 = CSR Base Addr */
+ ori r4,r3,TSI108_PB_REG_OFFSET
+ lwz r3,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */
+ ori r3,r3,0x0200 /* Set M1_EN bit */
+ stw r3,PB_ARB_CTRL(r4)
+
+ blr
+#endif
+
+ /*
+ * enable_EI
+ * Enable CPU core external interrupt
+ */
+
+ .global enable_EI
+enable_EI:
+ mfmsr r3
+ ori r3,r3,0x8000 /* set EE bit */
+ mtmsr r3
+ blr
+
+ /*
+ * disable_EI
+ * Disable CPU core external interrupt
+ */
+
+ .global disable_EI
+disable_EI:
+ mfmsr r3
+ li r4,-32768 /* aka "li r4,0x8000" */
+ andc r3,r3,r4 /* clear EE bit */
+ mtmsr r3
+ blr
+
+#ifdef ENABLE_SDRAM_ECC
+ /* enables SDRAM ECC */
+
+ .global enable_ECC
+enable_ECC:
+ ori r4,r29,TSI108_SD_REG_OFFSET
+ lwz r3,SD_ECC_CTRL(r4) /* Read SDRAM ECC Control Register */
+ ori r3,r3,0x0001 /* Set ECC_EN bit */
+ stw r3,SD_ECC_CTRL(r4)
+ blr
+
+ /*
+ * clear_ECC_err
+ * Clears all pending SDRAM ECC errors
+ * (normally after SDRAM scrubbing/initialization)
+ */
+
+ .global clear_ECC_err
+clear_ECC_err:
+ ori r4,r29,TSI108_SD_REG_OFFSET
+ ori r3,r0,0x0030 /* ECC_UE_INT + ECC_CE_INT bits */
+ stw r3,SD_INT_STATUS(r4)
+ blr
+
+#endif /* ENABLE_SDRAM_ECC */
+
+#ifndef SDC_HARDCODED_INIT
+
+ /* SDRAM SPD Support */
+#define SD_I2C_CTRL1 (0x400)
+#define SD_I2C_CTRL2 (0x404)
+#define SD_I2C_RD_DATA (0x408)
+#define SD_I2C_WR_DATA (0x40C)
+
+ /*
+ * SDRAM SPD Support Macros
+ */
+
+#define SPD_DIMM0 (0x00000100)
+#define SPD_DIMM1 (0x00000200) /* SPD_DIMM1 was 0x00000000 */
+
+#define SPD_RDIMM (0x01)
+#define SPD_UDIMM (0x02)
+
+#define SPD_CAS_3 0x8
+#define SPD_CAS_4 0x10
+#define SPD_CAS_5 0x20
+
+#define ERR_NO_DIMM_FOUND (0xdb0)
+#define ERR_TRAS_FAIL (0xdb1)
+#define ERR_TRCD_FAIL (0xdb2)
+#define ERR_TRP_FAIL (0xdb3)
+#define ERR_TWR_FAIL (0xdb4)
+#define ERR_UNKNOWN_PART (0xdb5)
+#define ERR_NRANK_INVALID (0xdb6)
+#define ERR_DIMM_SIZE (0xdb7)
+#define ERR_ADDR_MODE (0xdb8)
+#define ERR_RFRSH_RATE (0xdb9)
+#define ERR_DIMM_TYPE (0xdba)
+#define ERR_CL_VALUE (0xdbb)
+#define ERR_TRFC_FAIL (0xdbc)
+
+/* READ_SPD requirements:
+ * byte - byte address in SPD device (0 - 255)
+ * r3 = will return data read from I2C Byte location
+ * r4 - unchanged (SDC base addr)
+ * r5 - clobbered in routine (I2C status)
+ * r10 - number of DDR slot where first SPD device is detected
+ */
+
+#define READ_SPD(byte_num) \
+ addis r3, 0, byte_num@l; \
+ or r3, r3, r10; \
+ ori r3, r3, 0x0A; \
+ stw r3, SD_I2C_CTRL1(r4); \
+ li r3, I2C_CNTRL2_START; \
+ stw r3, SD_I2C_CTRL2(r4); \
+ eieio; \
+ sync; \
+ li r3, 0x100; \
+1:; \
+ addic. r3, r3, -1; \
+ bne 1b; \
+2:; \
+ lwz r5, SD_I2C_CTRL2(r4); \
+ rlwinm. r3,r5,0,23,23; \
+ bne 2b; \
+ rlwinm. r3,r5,0,3,3; \
+ lwz r3,SD_I2C_RD_DATA(r4)
+
+#define SPD_MIN_RFRSH (0x80)
+#define SPD_MAX_RFRSH (0x85)
+
+refresh_rates: /* in nSec */
+ .long 15625 /* Normal (0x80) */
+ .long 3900 /* Reduced 0.25x (0x81) */
+ .long 7800 /* Reduced 0.5x (0x82) */
+ .long 31300 /* Extended 2x (0x83) */
+ .long 62500 /* Extended 4x (0x84) */
+ .long 125000 /* Extended 8x (0x85) */
+
+/*
+ * tsi108_sdram_spd
+ *
+ * Inittializes SDRAM Controller using DDR2 DIMM Serial Presence Detect data
+ * Uses registers: r4 - SDC base address (not changed)
+ * r9 - SDC clocking period in nSec
+ * Changes registers: r3,r5,r6,r7,r8,r10,r11
+ */
+
+tsi108_sdram_spd:
+
+ li r10,SPD_DIMM0
+ xor r11,r11,r11 /* DIMM Base Address: starts from 0 */
+
+do_first_dimm:
+
+ /* Program Refresh Rate Register */
+
+ READ_SPD(12) /* get Refresh Rate */
+ beq check_next_slot
+ li r5, ERR_RFRSH_RATE
+ cmpi 0,0,r3,SPD_MIN_RFRSH
+ ble spd_fail
+ cmpi 0,0,r3,SPD_MAX_RFRSH
+ bgt spd_fail
+ addi r3,r3,-SPD_MIN_RFRSH
+ rlwinm r3,r3,2,0,31
+ lis r5,refresh_rates@h
+ ori r5,r5,refresh_rates@l
+ lwzx r5,r5,r3 /* get refresh rate in nSec */
+ divwu r5,r5,r9 /* calculate # of SDC clocks */
+ stw r5,SD_REFRESH(r4) /* Set refresh rate */
+ sync
+
+ /* Program SD Timing Register */
+
+ li r7, 0 /* clear r7 prior parameter collection */
+
+ READ_SPD(20) /* get DIMM type: Registered or Unbuffered */
+ beq spd_read_fail
+ li r5, ERR_DIMM_TYPE
+ cmpi 0,0,r3,SPD_UDIMM
+ beq do_cl
+ cmpi 0,0,r3,SPD_RDIMM
+ bne spd_fail
+ oris r7,r7,0x1000 /* set SD_TIMING[DIMM_TYPE] bit */
+
+do_cl:
+ READ_SPD(18) /* Get CAS Latency */
+ beq spd_read_fail
+ li r5,ERR_CL_VALUE
+ andi. r6,r3,SPD_CAS_3
+ beq cl_4
+ li r6,3
+ b set_cl
+cl_4:
+ andi. r6,r3,SPD_CAS_4
+ beq cl_5
+ li r6,4
+ b set_cl
+cl_5:
+ andi. r6,r3,SPD_CAS_5
+ beq spd_fail
+ li r6,5
+set_cl:
+ rlwimi r7,r6,24,5,7
+
+ READ_SPD(30) /* Get tRAS */
+ beq spd_read_fail
+ divwu r6,r3,r9
+ mullw r8,r6,r9
+ subf. r8,r8,r3
+ beq set_tras
+ addi r6,r6,1
+set_tras:
+ li r5,ERR_TRAS_FAIL
+ cmpi 0,0,r6,0x0F /* max supported value */
+ bgt spd_fail
+ rlwimi r7,r6,16,12,15
+
+ READ_SPD(29) /* Get tRCD */
+ beq spd_read_fail
+ /* right shift tRCD by 2 bits as per DDR2 spec */
+ rlwinm r3,r3,30,2,31
+ divwu r6,r3,r9
+ mullw r8,r6,r9
+ subf. r8,r8,r3
+ beq set_trcd
+ addi r6,r6,1
+set_trcd:
+ li r5,ERR_TRCD_FAIL
+ cmpi 0,0,r6,0x07 /* max supported value */
+ bgt spd_fail
+ rlwimi r7,r6,12,17,19
+
+ READ_SPD(27) /* Get tRP value */
+ beq spd_read_fail
+ rlwinm r3,r3,30,2,31 /* right shift tRP by 2 bits as per DDR2 spec */
+ divwu r6,r3,r9
+ mullw r8,r6,r9
+ subf. r8,r8,r3
+ beq set_trp
+ addi r6,r6,1
+set_trp:
+ li r5,ERR_TRP_FAIL
+ cmpi 0,0,r6,0x07 /* max supported value */
+ bgt spd_fail
+ rlwimi r7,r6,8,21,23
+
+ READ_SPD(36) /* Get tWR value */
+ beq spd_read_fail
+ rlwinm r3,r3,30,2,31 /* right shift tWR by 2 bits as per DDR2 spec */
+ divwu r6,r3,r9
+ mullw r8,r6,r9
+ subf. r8,r8,r3
+ beq set_twr
+ addi r6,r6,1
+set_twr:
+ addi r6,r6,-1 /* Tsi108 SDC always gives one extra clock */
+ li r5,ERR_TWR_FAIL
+ cmpi 0,0,r6,0x07 /* max supported value */
+ bgt spd_fail
+ rlwimi r7,r6,5,24,26
+
+ READ_SPD(42) /* Get tRFC */
+ beq spd_read_fail
+ li r5, ERR_TRFC_FAIL
+ /* Tsi108 spec: tRFC=(tRFC + 1)/2 */
+ addi r3,r3,1
+ rlwinm. r3,r3,31,1,31 /* divide by 2 */
+ beq spd_fail
+ divwu r6,r3,r9
+ mullw r8,r6,r9
+ subf. r8,r8,r3
+ beq set_trfc
+ addi r6,r6,1
+set_trfc:
+ cmpi 0,0,r6,0x1F /* max supported value */
+ bgt spd_fail
+ rlwimi r7,r6,0,27,31
+
+ stw r7,SD_TIMING(r4)
+ sync
+
+ /*
+ * The following two registers are set on per-DIMM basis.
+ * The SD_REFRESH and SD_TIMING settings are common for both DIMMS
+ */
+
+do_each_dimm:
+
+ /* Program SDRAM DIMM Control Register */
+
+ li r7, 0 /* clear r7 prior parameter collection */
+
+ READ_SPD(13) /* Get Primary SDRAM Width */
+ beq spd_read_fail
+ cmpi 0,0,r3,4 /* Check for 4-bit SDRAM */
+ beq do_nbank
+ oris r7,r7,0x0010 /* Set MEM_WIDTH bit */
+
+do_nbank:
+ READ_SPD(17) /* Get Number of banks on SDRAM device */
+ beq spd_read_fail
+ /* Grendel only distinguish betw. 4 or 8-bank memory parts */
+ li r5,ERR_UNKNOWN_PART /* non-supported memory part */
+ cmpi 0,0,r3,4
+ beq do_nrank
+ cmpi 0,0,r3,8
+ bne spd_fail
+ ori r7,r7,0x1000
+
+do_nrank:
+ READ_SPD(5) /* Get # of Ranks */
+ beq spd_read_fail
+ li r5,ERR_NRANK_INVALID
+ andi. r6,r3,0x7 /* Use bits [2..0] only */
+ beq do_addr_mode
+ cmpi 0,0,r6,1
+ bgt spd_fail
+ rlwimi r7,r6,8,23,23
+
+do_addr_mode:
+ READ_SPD(4) /* Get # of Column Addresses */
+ beq spd_read_fail
+ li r5, ERR_ADDR_MODE
+ andi. r3,r3,0x0f /* cut off reserved bits */
+ cmpi 0,0,r3,8
+ ble spd_fail
+ cmpi 0,0,r3,15
+ bgt spd_fail
+ addi r6,r3,-8 /* calculate ADDR_MODE parameter */
+ rlwimi r7,r6,4,24,27 /* set ADDR_MODE field */
+
+set_dimm_ctrl:
+#ifdef SDC_AUTOPRECH_EN
+ oris r7,r7,0x0001 /* set auto precharge EN bit */
+#endif
+ ori r7,r7,1 /* set ENABLE bit */
+ cmpi 0,0,r10,SPD_DIMM0
+ bne 1f
+ stw r7,SD_D0_CTRL(r4)
+ sync
+ b set_dimm_bar
+1:
+ stw r7,SD_D1_CTRL(r4)
+ sync
+
+
+ /* Program SDRAM DIMMx Base Address Register */
+
+set_dimm_bar:
+ READ_SPD(5) /* get # of Ranks */
+ beq spd_read_fail
+ andi. r7,r3,0x7
+ addi r7,r7,1
+ READ_SPD(31) /* Read DIMM rank density */
+ beq spd_read_fail
+ rlwinm r5,r3,27,29,31
+ rlwinm r6,r3,3,24,28
+ or r5,r6,r5 /* r5 = Normalized Rank Density byte */
+ lis r8, 0x0080 /* 128MB >> 4 */
+ mullw r8,r8,r5 /* r8 = (rank_size >> 4) */
+ mullw r8,r8,r7 /* r8 = (DIMM_size >> 4) */
+ neg r7,r8
+ rlwinm r7,r7,28,4,31
+ or r7,r7,r11 /* set ADDR field */
+ rlwinm r8,r8,12,20,31
+ add r11,r11,r8 /* set Base Addr for next DIMM */
+
+ cmpi 0,0,r10,SPD_DIMM0
+ bne set_dimm1_size
+ stw r7,SD_D0_BAR(r4)
+ sync
+ li r10,SPD_DIMM1
+ READ_SPD(0)
+ bne do_each_dimm
+ b spd_done
+
+set_dimm1_size:
+ stw r7,SD_D1_BAR(r4)
+ sync
+spd_done:
+ blr
+
+check_next_slot:
+ cmpi 0,0,r10,SPD_DIMM1
+ beq spd_read_fail
+ li r10,SPD_DIMM1
+ b do_first_dimm
+spd_read_fail:
+ ori r3,r0,0xdead
+ b err_hung
+spd_fail:
+ li r3,0x0bad
+ sync
+err_hung: /* hang here for debugging */
+ nop
+ nop
+ b err_hung
+
+#endif /* !SDC_HARDCODED_INIT */
diff --git a/board/mpc7448hpc2/config.mk b/board/mpc7448hpc2/config.mk
new file mode 100644
index 0000000..2e58858
--- /dev/null
+++ b/board/mpc7448hpc2/config.mk
@@ -0,0 +1,28 @@
+#
+# Copyright (c) 2005 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# Flash address
+TEXT_BASE = 0xFF000000
+# RAM address
+#TEXT_BASE = 0x00400000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -maltivec -mabi=altivec -msoft-float
diff --git a/board/mpc7448hpc2/mpc7448hpc2.c b/board/mpc7448hpc2/mpc7448hpc2.c
new file mode 100644
index 0000000..d4a047c
--- /dev/null
+++ b/board/mpc7448hpc2/mpc7448hpc2.c
@@ -0,0 +1,107 @@
+/*
+ * (C) Copyright 2005 Freescale Semiconductor, Inc.
+ *
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * modifications for the Tsi108 Emul Board by avb@Tundra
+ */
+
+/*
+ * board support/init functions for the
+ * Freescale MPC7448 HPC2 (High-Performance Computing 2 Platform).
+ */
+
+#include <common.h>
+#include <74xx_7xx.h>
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+extern void ft_cpu_setup (void *blob, bd_t *bd);
+#endif
+
+#undef DEBUG
+
+extern void flush_data_cache (void);
+extern void invalidate_l1_instruction_cache (void);
+extern void tsi108_init_f (void);
+
+int display_mem_map (void);
+
+void after_reloc (ulong dest_addr)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /*
+ * Jump to the main U-Boot board init code
+ */
+ board_init_r ((gd_t *) gd, dest_addr);
+ /* NOTREACHED */
+}
+
+/*
+ * Check Board Identity:
+ * report board type
+ */
+
+int checkboard (void)
+{
+ int l_type = 0;
+
+ printf ("BOARD: %s\n", CFG_BOARD_NAME);
+ return (l_type);
+}
+
+/*
+ * Read Processor ID:
+ *
+ * report calling processor number
+ */
+
+int read_pid (void)
+{
+ return 0; /* we are on single CPU platform for a while */
+}
+
+long int dram_size (int board_type)
+{
+ return 0x20000000; /* 256M bytes */
+}
+
+long int initdram (int board_type)
+{
+ return dram_size (board_type);
+}
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup (void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+ ft_cpu_setup (blob, bd);
+
+ p = ft_get_prop (blob, "/memory/reg", &len);
+ if (p != NULL) {
+ *p++ = cpu_to_be32 (bd->bi_memstart);
+ *p = cpu_to_be32 (bd->bi_memsize);
+ }
+}
+#endif
diff --git a/board/mpc7448hpc2/tsi108_init.c b/board/mpc7448hpc2/tsi108_init.c
new file mode 100644
index 0000000..e3b09cf
--- /dev/null
+++ b/board/mpc7448hpc2/tsi108_init.c
@@ -0,0 +1,665 @@
+/*****************************************************************************
+ * (C) Copyright 2003; Tundra Semiconductor Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *****************************************************************************/
+
+/*----------------------------------------------------------------------------
+ * FILENAME: tsi108_init.c
+ *
+ * Originator: Alex Bounine
+ *
+ * DESCRIPTION:
+ * Initialization code for the Tundra Tsi108 bridge chip
+ *---------------------------------------------------------------------------*/
+
+#include <common.h>
+#include <74xx_7xx.h>
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+#include <tsi108.h>
+
+extern void mpicInit (int verbose);
+
+/*
+ * Configuration Options
+ */
+
+typedef struct {
+ ulong upper;
+ ulong lower;
+} PB2OCN_LUT_ENTRY;
+
+PB2OCN_LUT_ENTRY pb2ocn_lut1[32] = {
+ /* 0 - 7 */
+ {0x00000000, 0x00000201}, /* PBA=0xE000_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE100_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE200_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE300_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE400_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE500_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE600_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE700_0000 -> PCI/X (Byte-Swap) */
+
+ /* 8 - 15 */
+ {0x00000000, 0x00000201}, /* PBA=0xE800_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xE900_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xEA00_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xEB00_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xEC00_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xED00_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xEE00_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xEF00_0000 -> PCI/X (Byte-Swap) */
+
+ /* 16 - 23 */
+ {0x00000000, 0x00000201}, /* PBA=0xF000_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF100_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF200_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF300_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF400_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF500_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF600_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF700_0000 -> PCI/X (Byte-Swap) */
+ /* 24 - 31 */
+ {0x00000000, 0x00000201}, /* PBA=0xF800_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xF900_0000 -> PCI/X (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xFA00_0000 -> PCI/X PCI I/O (Byte-Swap) */
+ {0x00000000, 0x00000201}, /* PBA=0xFB00_0000 -> PCI/X PCI Config (Byte-Swap) */
+
+ {0x00000000, 0x02000240}, /* PBA=0xFC00_0000 -> HLP */
+ {0x00000000, 0x01000240}, /* PBA=0xFD00_0000 -> HLP */
+ {0x00000000, 0x03000240}, /* PBA=0xFE00_0000 -> HLP */
+ {0x00000000, 0x00000240} /* PBA=0xFF00_0000 -> HLP : (Translation Enabled + Byte-Swap)*/
+};
+
+#ifdef CFG_CLK_SPREAD
+typedef struct {
+ ulong ctrl0;
+ ulong ctrl1;
+} PLL_CTRL_SET;
+
+/*
+ * Clock Generator SPLL0 initialization values
+ * PLL0 configuration table for various PB_CLKO freq.
+ * Uses pre-calculated values for Fs = 30 kHz, D = 0.5%
+ * Fout depends on required PB_CLKO. Based on Fref = 33 MHz
+ */
+
+static PLL_CTRL_SET pll0_config[8] = {
+ {0x00000000, 0x00000000}, /* 0: bypass */
+ {0x00000000, 0x00000000}, /* 1: reserved */
+ {0x00430044, 0x00000043}, /* 2: CG_PB_CLKO = 183 MHz */
+ {0x005c0044, 0x00000039}, /* 3: CG_PB_CLKO = 100 MHz */
+ {0x005c0044, 0x00000039}, /* 4: CG_PB_CLKO = 133 MHz */
+ {0x004a0044, 0x00000040}, /* 5: CG_PB_CLKO = 167 MHz */
+ {0x005c0044, 0x00000039}, /* 6: CG_PB_CLKO = 200 MHz */
+ {0x004f0044, 0x0000003e} /* 7: CG_PB_CLKO = 233 MHz */
+};
+#endif /* CFG_CLK_SPREAD */
+
+/*
+ * Prosessor Bus Clock (in MHz) defined by CG_PB_SELECT
+ * (based on recommended Tsi108 reference clock 33MHz)
+ */
+static int pb_clk_sel[8] = { 0, 0, 183, 100, 133, 167, 200, 233 };
+
+/*
+ * get_board_bus_clk ()
+ *
+ * returns the bus clock in Hz.
+ */
+unsigned long get_board_bus_clk (void)
+{
+ ulong i;
+
+ /* Detect PB clock freq. */
+ i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
+ i = (i >> 16) & 0x07; /* Get PB PLL multiplier */
+
+ return pb_clk_sel[i] * 1000000;
+}
+
+/*
+ * board_early_init_f ()
+ *
+ * board-specific initialization executed from flash
+ */
+
+int board_early_init_f (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ ulong i;
+
+ gd->mem_clk = 0;
+ i = in32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET +
+ CG_PWRUP_STATUS);
+ i = (i >> 20) & 0x07; /* Get GD PLL multiplier */
+ switch (i) {
+ case 0: /* external clock */
+ printf ("Using external clock\n");
+ break;
+ case 1: /* system clock */
+ gd->mem_clk = gd->bus_clk;
+ break;
+ case 4: /* 133 MHz */
+ case 5: /* 166 MHz */
+ case 6: /* 200 MHz */
+ gd->mem_clk = pb_clk_sel[i] * 1000000;
+ break;
+ default:
+ printf ("Invalid DDR2 clock setting\n");
+ return -1;
+ }
+ printf ("BUS: %d MHz\n", get_board_bus_clk() / 1000000);
+ printf ("MEM: %d MHz\n", gd->mem_clk / 1000000);
+ return 0;
+}
+
+/*
+ * board_early_init_r() - Tsi108 initialization function executed right after
+ * relocation. Contains code that cannot be executed from flash.
+ */
+
+int board_early_init_r (void)
+{
+ ulong temp, i;
+ ulong reg_val;
+ volatile ulong *reg_ptr;
+
+ reg_ptr =
+ (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900);
+
+ for (i = 0; i < 32; i++) {
+ *reg_ptr++ = 0x00000201; /* SWAP ENABLED */
+ *reg_ptr++ = 0x00;
+ }
+
+ __asm__ __volatile__ ("eieio");
+ __asm__ __volatile__ ("sync");
+
+ /* Setup PB_OCN_BAR2: size 256B + ENable @ 0x0_80000000 */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2,
+ 0x80000001);
+ __asm__ __volatile__ ("sync");
+
+ /* Make sure that OCN_BAR2 decoder is set (to allow following immediate
+ * read from SDRAM)
+ */
+
+ temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2);
+ __asm__ __volatile__ ("sync");
+
+ /*
+ * Remap PB_OCN_BAR1 to accomodate PCI-bus aperture and EPROM into the
+ * processor bus address space. Immediately after reset LUT and address
+ * translation are disabled for this BAR. Now we have to initialize LUT
+ * and switch from the BOOT mode to the normal operation mode.
+ *
+ * The aperture defined by PB_OCN_BAR1 startes at address 0xE0000000
+ * and covers 512MB of address space. To allow larger aperture we also
+ * have to relocate register window of Tsi108
+ *
+ * Initialize LUT (32-entries) prior switching PB_OCN_BAR1 from BOOT
+ * mode.
+ *
+ * initialize pointer to LUT associated with PB_OCN_BAR1
+ */
+ reg_ptr =
+ (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800);
+
+ for (i = 0; i < 32; i++) {
+ *reg_ptr++ = pb2ocn_lut1[i].lower;
+ *reg_ptr++ = pb2ocn_lut1[i].upper;
+ }
+
+ __asm__ __volatile__ ("sync");
+
+ /* Base addresses for CS0, CS1, CS2, CS3 */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR,
+ 0x00000000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR,
+ 0x00100000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR,
+ 0x00200000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR,
+ 0x00300000);
+ __asm__ __volatile__ ("sync");
+
+ /* Masks for HLP banks */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK,
+ 0xFFF00000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK,
+ 0xFFF00000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK,
+ 0xFFF00000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK,
+ 0xFFF00000);
+ __asm__ __volatile__ ("sync");
+
+ /* Set CTRL0 values for banks */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0,
+ 0x7FFC44C2);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0,
+ 0x7FFC44C0);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0,
+ 0x7FFC44C0);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0,
+ 0x7FFC44C2);
+ __asm__ __volatile__ ("sync");
+
+ /* Set banks to latched mode, enabled, and other default settings */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1,
+ 0x7C0F2000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1,
+ 0x7C0F2000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1,
+ 0x7C0F2000);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1,
+ 0x7C0F2000);
+ __asm__ __volatile__ ("sync");
+
+ /*
+ * Set new value for PB_OCN_BAR1: switch from BOOT to LUT mode.
+ * value for PB_OCN_BAR1: (BA-0xE000_0000 + size 512MB + ENable)
+ */
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1,
+ 0xE0000011);
+ __asm__ __volatile__ ("sync");
+
+ /* Make sure that OCN_BAR2 decoder is set (to allow following
+ * immediate read from SDRAM)
+ */
+
+ temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1);
+ __asm__ __volatile__ ("sync");
+
+ /*
+ * SRI: At this point we have enabled the HLP banks. That means we can
+ * now read from the NVRAM and initialize the environment variables.
+ * We will over-ride the env_init called in board_init_f
+ * This is really a work-around because, the HLP bank 1
+ * where NVRAM resides is not visible during board_init_f
+ * (lib_ppc/board.c)
+ * Alternatively, we could use the I2C EEPROM at start-up to configure
+ * and enable all HLP banks and not just HLP 0 as is being done for
+ * Taiga Rev. 2.
+ */
+
+ env_init ();
+
+#ifndef DISABLE_PBM
+
+ /*
+ * For IBM processors we have to set Address-Only commands generated
+ * by PBM that are different from ones set after reset.
+ */
+
+ temp = get_cpu_type ();
+
+ if ((CPU_750FX == temp) || (CPU_750GX == temp))
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD,
+ 0x00009955);
+#endif /* DISABLE_PBM */
+
+#ifdef CONFIG_PCI
+ /*
+ * Initialize PCI/X block
+ */
+
+ /* Map PCI/X Configuration Space (16MB @ 0x0_FE000000) */
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
+ PCI_PFAB_BAR0_UPPER, 0);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0,
+ 0xFB000001);
+ __asm__ __volatile__ ("sync");
+
+ /* Set Bus Number for the attached PCI/X bus (we will use 0 for NB) */
+
+ temp = in32(CFG_TSI108_CSR_BASE +
+ TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT);
+
+ temp &= ~0xFF00; /* Clear the BUS_NUM field */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT,
+ temp);
+
+ /* Map PCI/X IO Space (64KB @ 0x0_FD000000) takes one 16MB LUT entry */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER,
+ 0);
+ __asm__ __volatile__ ("sync");
+
+ /* This register is on the PCI side to interpret the address it receives
+ * and maps it as a IO address.
+ */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO,
+ 0xFA000001);
+ __asm__ __volatile__ ("sync");
+
+ /*
+ * Map PCI/X Memory Space
+ *
+ * Transactions directed from OCM to PCI Memory Space are directed
+ * from PB to PCI
+ * unchanged (as defined by PB_OCN_BAR1,2 and LUT settings).
+ * If address remapping is required the corresponding PCI_PFAB_MEM32
+ * and PCI_PFAB_PFMx register groups have to be configured.
+ *
+ * Map the path from the PCI/X bus into the system memory
+ *
+ * The memory mapped window assotiated with PCI P2O_BAR2 provides
+ * access to the system memory without address remapping.
+ * All system memory is opened for accesses initiated by PCI/X bus
+ * masters.
+ *
+ * Initialize LUT associated with PCI P2O_BAR2
+ *
+ * set pointer to LUT associated with PCI P2O_BAR2
+ */
+
+ reg_ptr =
+ (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500);
+
+#ifdef DISABLE_PBM
+
+ /* In case when PBM is disabled (no HW supported cache snoopng on PB)
+ * P2O_BAR2 is directly mapped into the system memory without address
+ * translation.
+ */
+
+ reg_val = 0x00000004; /* SDRAM port + NO Addr_Translation */
+
+ for (i = 0; i < 32; i++) {
+ *reg_ptr++ = reg_val; /* P2O_BAR2_LUTx */
+ *reg_ptr++ = 0; /* P2O_BAR2_LUT_UPPERx */
+ }
+
+ /* value for PCI BAR2 (size = 512MB, Enabled, No Addr. Translation) */
+ reg_val = 0x00007500;
+#else
+
+ reg_val = 0x00000002; /* Destination port = PBM */
+
+ for (i = 0; i < 32; i++) {
+ *reg_ptr++ = reg_val; /* P2O_BAR2_LUTx */
+/* P2O_BAR2_LUT_UPPERx : Set data swapping mode for PBM (byte swapping) */
+ *reg_ptr++ = 0x40000000;
+/* offset = 16MB, address translation is enabled to allow byte swapping */
+ reg_val += 0x01000000;
+ }
+
+/* value for PCI BAR2 (size = 512MB, Enabled, Address Translation Enabled) */
+ reg_val = 0x00007100;
+#endif
+
+ __asm__ __volatile__ ("eieio");
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
+ reg_val);
+ __asm__ __volatile__ ("sync");
+
+ /* Set 64-bit PCI bus address for system memory
+ * ( 0 is the best choice for easy mapping)
+ */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2,
+ 0x00000000);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER,
+ 0x00000000);
+ __asm__ __volatile__ ("sync");
+
+#ifndef DISABLE_PBM
+ /*
+ * The memory mapped window assotiated with PCI P2O_BAR3 provides
+ * access to the system memory using SDRAM OCN port and address
+ * translation. This is alternative way to access SDRAM from PCI
+ * required for Tsi108 emulation testing.
+ * All system memory is opened for accesses initiated by
+ * PCI/X bus masters.
+ *
+ * Initialize LUT associated with PCI P2O_BAR3
+ *
+ * set pointer to LUT associated with PCI P2O_BAR3
+ */
+ reg_ptr =
+ (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600);
+
+ reg_val = 0x00000004; /* Destination port = SDC */
+
+ for (i = 0; i < 32; i++) {
+ *reg_ptr++ = reg_val; /* P2O_BAR3_LUTx */
+
+/* P2O_BAR3_LUT_UPPERx : Set data swapping mode for PBM (byte swapping) */
+ *reg_ptr++ = 0;
+
+/* offset = 16MB, address translation is enabled to allow byte swapping */
+ reg_val += 0x01000000;
+ }
+
+ __asm__ __volatile__ ("eieio");
+ __asm__ __volatile__ ("sync");
+
+ /* Configure PCI P2O_BAR3 (size = 512MB, Enabled) */
+
+ reg_val =
+ in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
+ PCI_P2O_PAGE_SIZES);
+ reg_val &= ~0x00FF;
+ reg_val |= 0x0071;
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
+ reg_val);
+ __asm__ __volatile__ ("sync");
+
+ /* Set 64-bit base PCI bus address for window (0x20000000) */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER,
+ 0x00000000);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3,
+ 0x20000000);
+ __asm__ __volatile__ ("sync");
+
+#endif /* !DISABLE_PBM */
+
+#ifdef ENABLE_PCI_CSR_BAR
+ /* open if required access to Tsi108 CSRs from the PCI/X bus */
+ /* enable BAR0 on the PCI/X bus */
+ reg_val = in32(CFG_TSI108_CSR_BASE +
+ TSI108_PCI_REG_OFFSET + PCI_MISC_CSR);
+ reg_val |= 0x02;
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR,
+ reg_val);
+ __asm__ __volatile__ ("sync");
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER,
+ 0x00000000);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0,
+ CFG_TSI108_CSR_BASE);
+ __asm__ __volatile__ ("sync");
+
+#endif
+
+ /*
+ * Finally enable PCI/X Bus Master and Memory Space access
+ */
+
+ reg_val = in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR);
+ reg_val |= 0x06;
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val);
+ __asm__ __volatile__ ("sync");
+
+#endif /* CONFIG_PCI */
+
+ /*
+ * Initialize MPIC outputs (interrupt pins):
+ * Interrupt routing on the Grendel Emul. Board:
+ * PB_INT[0] -> INT (CPU0)
+ * PB_INT[1] -> INT (CPU1)
+ * PB_INT[2] -> MCP (CPU0)
+ * PB_INT[3] -> MCP (CPU1)
+ * Set interrupt controller outputs as Level_Sensitive/Active_Low
+ */
+ out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02);
+ __asm__ __volatile__ ("sync");
+
+ /*
+ * Ensure that Machine Check exception is enabled
+ * We need it to support PCI Bus probing (configuration reads)
+ */
+
+ reg_val = mfmsr ();
+ mtmsr(reg_val | MSR_ME);
+
+ return 0;
+}
+
+/*
+ * Needed to print out L2 cache info
+ * used in the misc_init_r function
+ */
+
+unsigned long get_l2cr (void)
+{
+ unsigned long l2controlreg;
+ asm volatile ("mfspr %0, 1017":"=r" (l2controlreg):);
+ return l2controlreg;
+}
+
+/*
+ * misc_init_r()
+ *
+ * various things to do after relocation
+ *
+ */
+
+int misc_init_r (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+#ifdef CFG_CLK_SPREAD /* Initialize Spread-Spectrum Clock generation */
+ ulong i;
+
+ /* Ensure that Spread-Spectrum is disabled */
+ out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0);
+
+ /* Initialize PLL1: CG_PCI_CLK , internal OCN_CLK
+ * Uses pre-calculated value for Fout = 800 MHz, Fs = 30 kHz, D = 0.5%
+ */
+
+ out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
+ 0x002e0044); /* D = 0.25% */
+ out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1,
+ 0x00000039); /* BWADJ */
+
+ /* Initialize PLL0: CG_PB_CLKO */
+ /* Detect PB clock freq. */
+ i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
+ i = (i >> 16) & 0x07; /* Get PB PLL multiplier */
+
+ out32 (CFG_TSI108_CSR_BASE +
+ TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, pll0_config[i].ctrl0);
+ out32 (CFG_TSI108_CSR_BASE +
+ TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL1, pll0_config[i].ctrl1);
+
+ /* Wait and set SSEN for both PLL0 and 1 */
+ udelay (1000);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
+ 0x802e0044); /* D=0.25% */
+ out32 (CFG_TSI108_CSR_BASE +
+ TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0,
+ 0x80000000 | pll0_config[i].ctrl0);
+#endif /* CFG_CLK_SPREAD */
+
+#ifdef CFG_L2
+ l2cache_enable ();
+#endif
+ printf ("BUS: %d MHz\n", gd->bus_clk / 1000000);
+ printf ("MEM: %d MHz\n", gd->mem_clk / 1000000);
+
+ /*
+ * All the information needed to print the cache details is avaiblable
+ * at this point i.e. above call to l2cache_enable is the very last
+ * thing done with regards to enabling diabling the cache.
+ * So this seems like a good place to print all this information
+ */
+
+ printf ("CACHE: ");
+ switch (get_cpu_type()) {
+ case CPU_7447A:
+ printf ("L1 Instruction cache - 32KB 8-way");
+ (get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ printf ("L1 Data cache - 32KB 8-way");
+ (get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ printf ("Unified L2 cache - 512KB 8-way");
+ (get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ printf ("\n");
+ break;
+
+ case CPU_7448:
+ printf ("L1 Instruction cache - 32KB 8-way");
+ (get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ printf ("L1 Data cache - 32KB 8-way");
+ (get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ printf ("Unified L2 cache - 1MB 8-way");
+ (get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
diff --git a/board/mpc7448hpc2/u-boot.lds b/board/mpc7448hpc2/u-boot.lds
new file mode 100644
index 0000000..8f24213
--- /dev/null
+++ b/board/mpc7448hpc2/u-boot.lds
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * u-boot.lds - linker script for U-Boot on mpc7448hpc2 Board.
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/74xx_7xx/start.o (.text)
+
+/* store the environment in a seperate sector in the boot flash */
+/* . = env_offset; */
+/* common/environment.o(.text) */
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c
index f4e5fc5..84d5da3 100644
--- a/cpu/74xx_7xx/cpu.c
+++ b/cpu/74xx_7xx/cpu.c
@@ -44,6 +44,10 @@
#include <74xx_7xx.h>
#include <asm/cache.h>
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
#ifdef CONFIG_AMIGAONEG3SE
#include "../board/MAI/AmigaOneG3SE/via686.h"
#include "../board/MAI/AmigaOneG3SE/memio.h"
@@ -101,6 +105,10 @@ get_cpu_type(void)
type = CPU_7457;
break;
+ case 0x8003:
+ type = CPU_7447A;
+ break;
+
case 0x8004:
type = CPU_7448;
break;
@@ -156,6 +164,10 @@ int checkcpu (void)
str = "MPC7410";
break;
+ case CPU_7447A:
+ str = "MPC7447A";
+ break;
+
case CPU_7448:
str = "MPC7448";
break;
@@ -264,20 +276,19 @@ do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
/*
* For the 7400 the TB clock runs at 1/4 the cpu bus speed.
*/
-#ifdef CONFIG_AMIGAONEG3SE
+#if defined(CONFIG_AMIGAONEG3SE) || defined(CFG_CONFIG_BUS_CLK)
unsigned long get_tbclk(void)
{
return (gd->bus_clk / 4);
}
-#else /* ! CONFIG_AMIGAONEG3SE */
+#else /* ! CONFIG_AMIGAONEG3SE and !CFG_CONFIG_BUS_CLK*/
unsigned long get_tbclk (void)
{
return CFG_BUS_HZ / 4;
}
-#endif /* CONFIG_AMIGAONEG3SE */
+#endif /* CONFIG_AMIGAONEG3SE or CFG_CONFIG_BUS_CLK*/
/* ------------------------------------------------------------------------- */
-
#if defined(CONFIG_WATCHDOG)
#if !defined(CONFIG_PCIPPC2) && !defined(CONFIG_BAB7xx)
void
@@ -289,3 +300,30 @@ watchdog_reset(void)
#endif /* CONFIG_WATCHDOG */
/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_cpu_setup (void *blob, bd_t *bd)
+{
+ u32 *p;
+ ulong clock;
+ int len;
+
+ clock = bd->bi_busfreq;
+
+ p = ft_get_prop (blob, "/cpus/" OF_CPU "/bus-frequency", &len);
+ if (p != NULL)
+ *p = cpu_to_be32 (clock);
+
+#if defined(CONFIG_TSI108_ETH)
+ p = ft_get_prop (blob, "/" OF_TSI "/ethernet@6200/address", &len);
+ memcpy (p, bd->bi_enetaddr, 6);
+#endif
+
+#if defined(CONFIG_HAS_ETH1)
+ p = ft_get_prop (blob, "/" OF_TSI "/ethernet@6600/address", &len);
+ memcpy (p, bd->bi_enet1addr, 6);
+#endif
+}
+#endif
+/* ------------------------------------------------------------------------- */
diff --git a/cpu/74xx_7xx/cpu_init.c b/cpu/74xx_7xx/cpu_init.c
index e02a4cc..1dd1b2c 100644
--- a/cpu/74xx_7xx/cpu_init.c
+++ b/cpu/74xx_7xx/cpu_init.c
@@ -43,6 +43,7 @@ cpu_init_f (void)
case CPU_7450:
case CPU_7455:
case CPU_7457:
+ case CPU_7447A:
case CPU_7448:
/* enable the timebase bit in HID0 */
set_hid0(get_hid0() | 0x4000000);
diff --git a/cpu/74xx_7xx/speed.c b/cpu/74xx_7xx/speed.c
index d1800ed..d8c40ce 100644
--- a/cpu/74xx_7xx/speed.c
+++ b/cpu/74xx_7xx/speed.c
@@ -31,6 +31,8 @@
DECLARE_GLOBAL_DATA_PTR;
+extern unsigned long get_board_bus_clk (void);
+
static const int hid1_multipliers_x_10[] = {
25, /* 0000 - 2.5x */
75, /* 0001 - 7.5x */
@@ -50,6 +52,42 @@ static const int hid1_multipliers_x_10[] = {
0 /* 1111 - off */
};
+/* PLL_CFG[0:4] table for cpu 7448/7447A/7455/7457 */
+static const int hid1_74xx_multipliers_x_10[] = {
+ 115, /* 00000 - 11.5x */
+ 170, /* 00001 - 17x */
+ 75, /* 00010 - 7.5x */
+ 150, /* 00011 - 15x */
+ 70, /* 00100 - 7x */
+ 180, /* 00101 - 18x */
+ 10, /* 00110 - bypass */
+ 200, /* 00111 - 20x */
+ 20, /* 01000 - 2x */
+ 210, /* 01001 - 21x */
+ 65, /* 01010 - 6.5x */
+ 130, /* 01011 - 13x */
+ 85, /* 01100 - 8.5x */
+ 240, /* 01101 - 24x */
+ 95, /* 01110 - 9.5x */
+ 90, /* 01111 - 9x */
+ 30, /* 10000 - 3x */
+ 105, /* 10001 - 10.5x */
+ 55, /* 10010 - 5.5x */
+ 110, /* 10011 - 11x */
+ 40, /* 10100 - 4x */
+ 100, /* 10101 - 10x */
+ 50, /* 10110 - 5x */
+ 120, /* 10111 - 12x */
+ 80, /* 11000 - 8x */
+ 140, /* 11001 - 14x */
+ 60, /* 11010 - 6x */
+ 160, /* 11011 - 16x */
+ 135, /* 11100 - 13.5x */
+ 280, /* 11101 - 28x */
+ 0, /* 11110 - off */
+ 125 /* 11111 - 12.5x */
+};
+
static const int hid1_fx_multipliers_x_10[] = {
00, /* 0000 - off */
00, /* 0001 - off */
@@ -89,22 +127,30 @@ int get_clocks (void)
{
ulong clock = 0;
+#ifdef CFG_BUS_CLK
+ gd->bus_clk = CFG_BUS_CLK; /* bus clock is a fixed frequency */
+#else
+ gd->bus_clk = get_board_bus_clk (); /* bus clock is configurable */
+#endif
+
/* calculate the clock frequency based upon the CPU type */
switch (get_cpu_type()) {
+ case CPU_7447A:
case CPU_7448:
case CPU_7455:
case CPU_7457:
/*
- * It is assumed that the PLL_EXT line is zero.
* Make sure division is done before multiplication to prevent 32-bit
* arithmetic overflows which will cause a negative number
*/
- clock = (CFG_BUS_CLK / 10) * hid1_multipliers_x_10[(get_hid1 () >> 13) & 0xF];
+ clock = (gd->bus_clk / 10) *
+ hid1_74xx_multipliers_x_10[(get_hid1 () >> 12) & 0x1F];
break;
case CPU_750GX:
case CPU_750FX:
- clock = CFG_BUS_CLK * hid1_fx_multipliers_x_10[get_hid1 () >> 27] / 10;
+ clock = gd->bus_clk *
+ hid1_fx_multipliers_x_10[get_hid1 () >> 27] / 10;
break;
case CPU_7450:
@@ -121,7 +167,8 @@ int get_clocks (void)
* Make sure division is done before multiplication to prevent 32-bit
* arithmetic overflows which will cause a negative number
*/
- clock = (CFG_BUS_CLK / 10) * hid1_multipliers_x_10[get_hid1 () >> 28];
+ clock = (gd->bus_clk / 10) *
+ hid1_multipliers_x_10[get_hid1 () >> 28];
break;
case CPU_UNKNOWN:
@@ -131,7 +178,6 @@ int get_clocks (void)
}
gd->cpu_clk = clock;
- gd->bus_clk = CFG_BUS_CLK;
return (0);
}
diff --git a/doc/README.mpc7448hpc2 b/doc/README.mpc7448hpc2
new file mode 100644
index 0000000..0e40e39
--- /dev/null
+++ b/doc/README.mpc7448hpc2
@@ -0,0 +1,185 @@
+Freescale MPC7448hpc2 (Taiga) board
+===================================
+
+Created 08/11/2006 Roy Zang
+--------------------------
+MPC7448hpc2 (Taiga) board is a high-performance PowerPC server reference
+design, which is optimized for high speed throughput between the processor and
+the memory, disk drive and Ethernet port subsystems.
+
+MPC7448hpc2(Taiga) is designed to the micro-ATX chassis, allowing it to be
+used in 1U or 2U rack-mount chassis¡¯, as well as in standard ATX/Micro-ATX
+chassis.
+
+Building U-Boot
+------------------
+The mpc7448hpc2 code base is known to compile using:
+ Binutils 2.15, Gcc 3.4.3, Glibc 2.3.3
+
+ $ make mpc7448hpc2_config
+ Configuring for mpc7448hpc2 board...
+
+ $ make
+
+Memory Map
+----------
+
+The memory map is setup for Linux to operate properly.
+
+The mapping is:
+
+ Range Start Range End Definition Size
+
+ 0x0000_0000 0x7fff_ffff DDR 2G
+ 0xe000_0000 0xe7ff_ffff PCI Memory 128M
+ 0xfa00_0000 0xfaff_ffff PCI IO 16M
+ 0xfb00_0000 0xfbff_ffff PCI Config 16M
+ 0xfc00_0000 0xfc0f_ffff NVRAM/CADMUS 1M
+ 0xfe00_0000 0xfeff_ffff PromJet 16M
+ 0xff00_0000 0xff80_0000 FLASH (boot flash) 8M
+ 0xff80_0000 0xffff_ffff FLASH (second half flash) 8M
+
+Using Flash
+-----------
+
+The MPC7448hpc2 board has two "banks" of flash, each 8MB in size
+(2^23 = 0x00800000).
+
+Note: the "bank" here refers to half of the flash. In fact, there is only one
+bank of flash, which is divided into low and high half. Each is controlled by
+the most significant bit of the address bus. The so called "bank" is only for
+convenience.
+
+There is a switch which allows the "bank" to be selected. The switch
+settings for updating flash are given below.
+
+The u-boot commands for copying the boot-bank into the secondary bank are
+as follows:
+
+ erase ff800000 ff880000
+ cp.b ff000000 ff800000 80000
+
+U-boot commands for downloading an image via tftp and flashing
+it into the secondary bank:
+
+ tftp 10000 <u-boot.bin.image>
+ erase ff000000 ff080000
+ cp.b 10000 ff000000 80000
+
+After copying the image into the second bank of flash, be sure to toggle
+SW3[4] on board before resetting the board in order to set the
+secondary bank as the boot-bank.
+
+Board Switches
+----------------------
+
+Most switches on the board should not be changed. The most frequent
+user-settable switches on the board are used to configure
+the flash banks and determining the PCI frequency.
+
+SW1[1-5]: Processor core voltage
+
+ 12345 Core Voltage
+ -----
+ SW1=01111 1.000V.
+ SW1=01101 1.100V.
+ SW1=01011 1.200V.
+ SW1=01001 1.300V only for MPC7447A.
+
+
+SW2[1-6]: CPU core frequency
+
+ CPU Core Frequency (MHz)
+ Bus Frequency
+ 123456 100 133 167 200 Ratio
+
+ ------
+ SW2=101100 500 667 833 1000 5x
+ SW2=100100 550 733 917 1100 5.5x
+ SW2=110100 600 800 1000 1200 6x
+ SW2=010100 650 866 1083 1300 6.5x
+ SW2=001000 700 930 1167 1400 7x
+ SW2=000100 750 1000 1250 1500 7.5x
+ SW2=110000 800 1066 1333 1600 8x
+ SW2=011000 850 1333 1417 1700 8.5x only for MPC7447A
+ SW2=011110 900 1200 1500 1800 9x
+
+This table shows only a subset of available frequency options; see the CPU
+hardware specifications for more information.
+
+SW2[7-8]: Bus Protocol and CPU Reset Option
+
+ 7
+ -
+ SW2=0 System bus uses MPX bus protocol
+ SW2=1 System bus uses 60x bus protocol
+
+ 8
+ -
+ SW2=0 TSI108 can cause CPU reset
+ SW2=1 TSI108 can not cause CPU reset
+
+SW3[1-8] system options
+
+ 123
+ ---
+ SW3=xxx Connected to GPIO[0:2] on TSI108
+
+ 4
+ -
+ SW3=0 CPU boots from low half of flash
+ SW3=1 CPU boots from high half of flash
+
+ 5
+ -
+ SW3=0 SATA and slot2 connected to PCI bus
+ SW3=1 Only slot1 connected to PCI bus
+
+ 6
+ -
+ SW3=0 USB connected to PCI bus
+ SW3=1 USB disconnected from PCI bus
+
+ 7
+ -
+ SW3=0 Flash is write protected
+ SW3=1 Flash is NOT write protected
+
+ 8
+ -
+ SW3=0 CPU will boot from flash
+ SW3=1 CPU will boot from PromJet
+
+SW4[1-3]: System bus frequency
+
+ Bus Frequency (MHz)
+ ---
+ SW4=010 183
+ SW4=011 100
+ SW4=100 133
+ SW4=101 166 only for MPC7447A
+ SW4=110 200 only for MPC7448
+ others reserved
+
+SW4[4-6]: DDR2 SDRAM frequency
+
+ Bus Frequency (MHz)
+ ---
+ SW4=000 external clock
+ SW4=011 system clock
+ SW4=100 133
+ SW4=101 166
+ SW4=110 200
+ others reserved
+
+SW4[7-8]: PCI/PCI-X frequency control
+ 7
+ -
+ SW4=0 PCI/PCI-X bus operates normally
+ SW4=1 PCI bus forced to PCI-33 mode
+
+ 8
+ -
+ SW4=0 PCI-X mode at 133 MHz allowed
+ SW4=1 PCI-X mode limited to 100 MHz
+
diff --git a/drivers/Makefile b/drivers/Makefile
index 5a369df..6a3ea5d 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -35,8 +35,8 @@ COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \
lan91c96.o \
natsemi.o ne2000.o netarm_eth.o netconsole.o \
ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \
- omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o \
- pcnet.o plb2800_eth.o \
+ omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o tsi108_pci.o\
+ tsi108_i2c.o pcnet.o plb2800_eth.o \
ps2ser.o ps2mult.o pc_keyb.o \
rtl8019.o rtl8139.o rtl8169.o \
s3c4510b_eth.o s3c4510b_uart.o \
@@ -45,7 +45,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \
serial_pl010.o serial_pl011.o serial_xuartlite.o \
sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
status_led.o sym53c8xx.o ahci.o \
- ti_pci1410a.o tigon3.o tsec.o \
+ ti_pci1410a.o tigon3.o tsec.o tsi108_eth.o\
usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
videomodes.o w83c553f.o \
ks8695eth.o \
diff --git a/drivers/tsi108_eth.c b/drivers/tsi108_eth.c
new file mode 100644
index 0000000..47341be
--- /dev/null
+++ b/drivers/tsi108_eth.c
@@ -0,0 +1,1036 @@
+/***********************************************************************
+ *
+ * Copyright (c) 2005 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Description:
+ * Ethernet interface for Tundra TSI108 bridge chip
+ *
+ ***********************************************************************/
+
+#include <config.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \
+ && defined(CONFIG_TSI108_ETH)
+
+#if !defined(CONFIG_TSI108_ETH_NUM_PORTS) || (CONFIG_TSI108_ETH_NUM_PORTS > 2)
+#error "CONFIG_TSI108_ETH_NUM_PORTS must be defined as 1 or 2"
+#endif
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/cache.h>
+
+#ifdef DEBUG
+#define TSI108_ETH_DEBUG 7
+#else
+#define TSI108_ETH_DEBUG 0
+#endif
+
+#if TSI108_ETH_DEBUG > 0
+#define debug_lev(lev, fmt, args...) \
+if (lev <= TSI108_ETH_DEBUG) \
+printf ("%s %d: " fmt, __FUNCTION__, __LINE__, ##args)
+#else
+#define debug_lev(lev, fmt, args...) do{}while(0)
+#endif
+
+#define RX_PRINT_ERRORS
+#define TX_PRINT_ERRORS
+
+#define ETH_BASE (CFG_TSI108_CSR_BASE + 0x6000)
+
+#define ETH_PORT_OFFSET 0x400
+
+#define __REG32(base, offset) (*((volatile u32 *)((char *)(base) + (offset))))
+
+#define reg_MAC_CONFIG_1(base) __REG32(base, 0x00000000)
+#define MAC_CONFIG_1_TX_ENABLE (0x00000001)
+#define MAC_CONFIG_1_SYNC_TX_ENABLE (0x00000002)
+#define MAC_CONFIG_1_RX_ENABLE (0x00000004)
+#define MAC_CONFIG_1_SYNC_RX_ENABLE (0x00000008)
+#define MAC_CONFIG_1_TX_FLOW_CONTROL (0x00000010)
+#define MAC_CONFIG_1_RX_FLOW_CONTROL (0x00000020)
+#define MAC_CONFIG_1_LOOP_BACK (0x00000100)
+#define MAC_CONFIG_1_RESET_TX_FUNCTION (0x00010000)
+#define MAC_CONFIG_1_RESET_RX_FUNCTION (0x00020000)
+#define MAC_CONFIG_1_RESET_TX_MAC (0x00040000)
+#define MAC_CONFIG_1_RESET_RX_MAC (0x00080000)
+#define MAC_CONFIG_1_SIM_RESET (0x40000000)
+#define MAC_CONFIG_1_SOFT_RESET (0x80000000)
+
+#define reg_MAC_CONFIG_2(base) __REG32(base, 0x00000004)
+#define MAC_CONFIG_2_FULL_DUPLEX (0x00000001)
+#define MAC_CONFIG_2_CRC_ENABLE (0x00000002)
+#define MAC_CONFIG_2_PAD_CRC (0x00000004)
+#define MAC_CONFIG_2_LENGTH_CHECK (0x00000010)
+#define MAC_CONFIG_2_HUGE_FRAME (0x00000020)
+#define MAC_CONFIG_2_INTERFACE_MODE(val) (((val) & 0x3) << 8)
+#define MAC_CONFIG_2_PREAMBLE_LENGTH(val) (((val) & 0xf) << 12)
+#define INTERFACE_MODE_NIBBLE 1 /* 10/100 Mb/s MII) */
+#define INTERFACE_MODE_BYTE 2 /* 1000 Mb/s GMII/TBI */
+
+#define reg_MAXIMUM_FRAME_LENGTH(base) __REG32(base, 0x00000010)
+
+#define reg_MII_MGMT_CONFIG(base) __REG32(base, 0x00000020)
+#define MII_MGMT_CONFIG_MGMT_CLOCK_SELECT(val) ((val) & 0x7)
+#define MII_MGMT_CONFIG_NO_PREAMBLE (0x00000010)
+#define MII_MGMT_CONFIG_SCAN_INCREMENT (0x00000020)
+#define MII_MGMT_CONFIG_RESET_MGMT (0x80000000)
+
+#define reg_MII_MGMT_COMMAND(base) __REG32(base, 0x00000024)
+#define MII_MGMT_COMMAND_READ_CYCLE (0x00000001)
+#define MII_MGMT_COMMAND_SCAN_CYCLE (0x00000002)
+
+#define reg_MII_MGMT_ADDRESS(base) __REG32(base, 0x00000028)
+#define reg_MII_MGMT_CONTROL(base) __REG32(base, 0x0000002c)
+#define reg_MII_MGMT_STATUS(base) __REG32(base, 0x00000030)
+
+#define reg_MII_MGMT_INDICATORS(base) __REG32(base, 0x00000034)
+#define MII_MGMT_INDICATORS_BUSY (0x00000001)
+#define MII_MGMT_INDICATORS_SCAN (0x00000002)
+#define MII_MGMT_INDICATORS_NOT_VALID (0x00000004)
+
+#define reg_INTERFACE_STATUS(base) __REG32(base, 0x0000003c)
+#define INTERFACE_STATUS_LINK_FAIL (0x00000008)
+#define INTERFACE_STATUS_EXCESS_DEFER (0x00000200)
+
+#define reg_STATION_ADDRESS_1(base) __REG32(base, 0x00000040)
+#define reg_STATION_ADDRESS_2(base) __REG32(base, 0x00000044)
+
+#define reg_PORT_CONTROL(base) __REG32(base, 0x00000200)
+#define PORT_CONTROL_PRI (0x00000001)
+#define PORT_CONTROL_BPT (0x00010000)
+#define PORT_CONTROL_SPD (0x00040000)
+#define PORT_CONTROL_RBC (0x00080000)
+#define PORT_CONTROL_PRB (0x00200000)
+#define PORT_CONTROL_DIS (0x00400000)
+#define PORT_CONTROL_TBI (0x00800000)
+#define PORT_CONTROL_STE (0x10000000)
+#define PORT_CONTROL_ZOR (0x20000000)
+#define PORT_CONTROL_CLR (0x40000000)
+#define PORT_CONTROL_SRT (0x80000000)
+
+#define reg_TX_CONFIG(base) __REG32(base, 0x00000220)
+#define TX_CONFIG_START_Q (0x00000003)
+#define TX_CONFIG_EHP (0x00400000)
+#define TX_CONFIG_CHP (0x00800000)
+#define TX_CONFIG_RST (0x80000000)
+
+#define reg_TX_CONTROL(base) __REG32(base, 0x00000224)
+#define TX_CONTROL_GO (0x00008000)
+#define TX_CONTROL_MP (0x01000000)
+#define TX_CONTROL_EAI (0x20000000)
+#define TX_CONTROL_ABT (0x40000000)
+#define TX_CONTROL_EII (0x80000000)
+
+#define reg_TX_STATUS(base) __REG32(base, 0x00000228)
+#define TX_STATUS_QUEUE_USABLE (0x0000000f)
+#define TX_STATUS_CURR_Q (0x00000300)
+#define TX_STATUS_ACT (0x00008000)
+#define TX_STATUS_QUEUE_IDLE (0x000f0000)
+#define TX_STATUS_EOQ_PENDING (0x0f000000)
+
+#define reg_TX_EXTENDED_STATUS(base) __REG32(base, 0x0000022c)
+#define TX_EXTENDED_STATUS_END_OF_QUEUE_CONDITION (0x0000000f)
+#define TX_EXTENDED_STATUS_END_OF_FRAME_CONDITION (0x00000f00)
+#define TX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000)
+#define TX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000)
+
+#define reg_TX_THRESHOLDS(base) __REG32(base, 0x00000230)
+
+#define reg_TX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000270)
+#define TX_DIAGNOSTIC_ADDR_INDEX (0x0000007f)
+#define TX_DIAGNOSTIC_ADDR_DFR (0x40000000)
+#define TX_DIAGNOSTIC_ADDR_AI (0x80000000)
+
+#define reg_TX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000274)
+
+#define reg_TX_ERROR_STATUS(base) __REG32(base, 0x00000278)
+#define TX_ERROR_STATUS (0x00000278)
+#define TX_ERROR_STATUS_QUEUE_0_ERROR_RESPONSE (0x0000000f)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_0 (0x00000010)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_0 (0x00000020)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_0 (0x00000040)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_0 (0x00000080)
+#define TX_ERROR_STATUS_QUEUE_1_ERROR_RESPONSE (0x00000f00)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_1 (0x00001000)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_1 (0x00002000)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_1 (0x00004000)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_1 (0x00008000)
+#define TX_ERROR_STATUS_QUEUE_2_ERROR_RESPONSE (0x000f0000)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_2 (0x00100000)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_2 (0x00200000)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_2 (0x00400000)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_2 (0x00800000)
+#define TX_ERROR_STATUS_QUEUE_3_ERROR_RESPONSE (0x0f000000)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_3 (0x10000000)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_3 (0x20000000)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_3 (0x40000000)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_3 (0x80000000)
+
+#define reg_TX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000280)
+#define TX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f)
+#define TX_QUEUE_0_CONFIG_BSWP (0x00000400)
+#define TX_QUEUE_0_CONFIG_WSWP (0x00000800)
+#define TX_QUEUE_0_CONFIG_AM (0x00004000)
+#define TX_QUEUE_0_CONFIG_GVI (0x00008000)
+#define TX_QUEUE_0_CONFIG_EEI (0x00010000)
+#define TX_QUEUE_0_CONFIG_ELI (0x00020000)
+#define TX_QUEUE_0_CONFIG_ENI (0x00040000)
+#define TX_QUEUE_0_CONFIG_ESI (0x00080000)
+#define TX_QUEUE_0_CONFIG_EDI (0x00100000)
+
+#define reg_TX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000284)
+#define TX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f)
+#define TX_QUEUE_0_BUF_CONFIG_BURST (0x00000300)
+#define TX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400)
+#define TX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800)
+
+#define OCN_PORT_HLP 0 /* HLP Interface */
+#define OCN_PORT_PCI_X 1 /* PCI-X Interface */
+#define OCN_PORT_PROCESSOR_MASTER 2 /* Processor Interface (master) */
+#define OCN_PORT_PROCESSOR_SLAVE 3 /* Processor Interface (slave) */
+#define OCN_PORT_MEMORY 4 /* Memory Controller */
+#define OCN_PORT_DMA 5 /* DMA Controller */
+#define OCN_PORT_ETHERNET 6 /* Ethernet Controller */
+#define OCN_PORT_PRINT 7 /* Print Engine Interface */
+
+#define reg_TX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000288)
+
+#define reg_TX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000028c)
+#define TX_QUEUE_0_PTR_HIGH_VALID (0x80000000)
+
+#define reg_RX_CONFIG(base) __REG32(base, 0x00000320)
+#define RX_CONFIG_DEF_Q (0x00000003)
+#define RX_CONFIG_EMF (0x00000100)
+#define RX_CONFIG_EUF (0x00000200)
+#define RX_CONFIG_BFE (0x00000400)
+#define RX_CONFIG_MFE (0x00000800)
+#define RX_CONFIG_UFE (0x00001000)
+#define RX_CONFIG_SE (0x00002000)
+#define RX_CONFIG_ABF (0x00200000)
+#define RX_CONFIG_APE (0x00400000)
+#define RX_CONFIG_CHP (0x00800000)
+#define RX_CONFIG_RST (0x80000000)
+
+#define reg_RX_CONTROL(base) __REG32(base, 0x00000324)
+#define GE_E0_RX_CONTROL_QUEUE_ENABLES (0x0000000f)
+#define GE_E0_RX_CONTROL_GO (0x00008000)
+#define GE_E0_RX_CONTROL_EAI (0x20000000)
+#define GE_E0_RX_CONTROL_ABT (0x40000000)
+#define GE_E0_RX_CONTROL_EII (0x80000000)
+
+#define reg_RX_EXTENDED_STATUS(base) __REG32(base, 0x0000032c)
+#define RX_EXTENDED_STATUS (0x0000032c)
+#define RX_EXTENDED_STATUS_EOQ (0x0000000f)
+#define RX_EXTENDED_STATUS_EOQ_0 (0x00000001)
+#define RX_EXTENDED_STATUS_EOF (0x00000f00)
+#define RX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000)
+#define RX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000)
+
+#define reg_RX_THRESHOLDS(base) __REG32(base, 0x00000330)
+
+#define reg_RX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000370)
+#define RX_DIAGNOSTIC_ADDR_INDEX (0x0000007f)
+#define RX_DIAGNOSTIC_ADDR_DFR (0x40000000)
+#define RX_DIAGNOSTIC_ADDR_AI (0x80000000)
+
+#define reg_RX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000374)
+
+#define reg_RX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000380)
+#define RX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f)
+#define RX_QUEUE_0_CONFIG_BSWP (0x00000400)
+#define RX_QUEUE_0_CONFIG_WSWP (0x00000800)
+#define RX_QUEUE_0_CONFIG_AM (0x00004000)
+#define RX_QUEUE_0_CONFIG_EEI (0x00010000)
+#define RX_QUEUE_0_CONFIG_ELI (0x00020000)
+#define RX_QUEUE_0_CONFIG_ENI (0x00040000)
+#define RX_QUEUE_0_CONFIG_ESI (0x00080000)
+#define RX_QUEUE_0_CONFIG_EDI (0x00100000)
+
+#define reg_RX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000384)
+#define RX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f)
+#define RX_QUEUE_0_BUF_CONFIG_BURST (0x00000300)
+#define RX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400)
+#define RX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800)
+
+#define reg_RX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000388)
+
+#define reg_RX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000038c)
+#define RX_QUEUE_0_PTR_HIGH_VALID (0x80000000)
+
+/*
+ * PHY register definitions
+ */
+/* the first 15 PHY registers are standard. */
+#define PHY_CTRL_REG 0 /* Control Register */
+#define PHY_STATUS_REG 1 /* Status Regiser */
+#define PHY_ID1_REG 2 /* Phy Id Reg (word 1) */
+#define PHY_ID2_REG 3 /* Phy Id Reg (word 2) */
+#define PHY_AN_ADV_REG 4 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY_REG 5 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP_REG 6 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX_REG 7 /* Next Page TX */
+#define PHY_LP_NEXT_PAGE_REG 8 /* Link Partner Next Page */
+#define PHY_1000T_CTRL_REG 9 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS_REG 10 /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS_REG 11 /* Extended Status Reg */
+
+/*
+ * PHY Register bit masks.
+ */
+#define PHY_CTRL_RESET (1 << 15)
+#define PHY_CTRL_LOOPBACK (1 << 14)
+#define PHY_CTRL_SPEED0 (1 << 13)
+#define PHY_CTRL_AN_EN (1 << 12)
+#define PHY_CTRL_PWR_DN (1 << 11)
+#define PHY_CTRL_ISOLATE (1 << 10)
+#define PHY_CTRL_RESTART_AN (1 << 9)
+#define PHY_CTRL_FULL_DUPLEX (1 << 8)
+#define PHY_CTRL_CT_EN (1 << 7)
+#define PHY_CTRL_SPEED1 (1 << 6)
+
+#define PHY_STAT_100BASE_T4 (1 << 15)
+#define PHY_STAT_100BASE_X_FD (1 << 14)
+#define PHY_STAT_100BASE_X_HD (1 << 13)
+#define PHY_STAT_10BASE_T_FD (1 << 12)
+#define PHY_STAT_10BASE_T_HD (1 << 11)
+#define PHY_STAT_100BASE_T2_FD (1 << 10)
+#define PHY_STAT_100BASE_T2_HD (1 << 9)
+#define PHY_STAT_EXT_STAT (1 << 8)
+#define PHY_STAT_RESERVED (1 << 7)
+#define PHY_STAT_MFPS (1 << 6) /* Management Frames Preamble Suppression */
+#define PHY_STAT_AN_COMPLETE (1 << 5)
+#define PHY_STAT_REM_FAULT (1 << 4)
+#define PHY_STAT_AN_CAP (1 << 3)
+#define PHY_STAT_LINK_UP (1 << 2)
+#define PHY_STAT_JABBER (1 << 1)
+#define PHY_STAT_EXT_CAP (1 << 0)
+
+#define TBI_CONTROL_2 0x11
+#define TBI_CONTROL_2_ENABLE_COMMA_DETECT 0x0001
+#define TBI_CONTROL_2_ENABLE_WRAP 0x0002
+#define TBI_CONTROL_2_G_MII_MODE 0x0010
+#define TBI_CONTROL_2_RECEIVE_CLOCK_SELECT 0x0020
+#define TBI_CONTROL_2_AUTO_NEGOTIATION_SENSE 0x0100
+#define TBI_CONTROL_2_DISABLE_TRANSMIT_RUNNING_DISPARITY 0x1000
+#define TBI_CONTROL_2_DISABLE_RECEIVE_RUNNING_DISPARITY 0x2000
+#define TBI_CONTROL_2_SHORTCUT_LINK_TIMER 0x4000
+#define TBI_CONTROL_2_SOFT_RESET 0x8000
+
+/* marvel specific */
+#define MV1111_EXT_CTRL1_REG 16 /* PHY Specific Control Reg */
+#define MV1111_SPEC_STAT_REG 17 /* PHY Specific Status Reg */
+#define MV1111_EXT_CTRL2_REG 20 /* Extended PHY Specific Control Reg */
+
+/*
+ * MARVELL 88E1111 PHY register bit masks
+ */
+/* PHY Specific Status Register (MV1111_EXT_CTRL1_REG) */
+
+#define SPEC_STAT_SPEED_MASK (3 << 14)
+#define SPEC_STAT_FULL_DUP (1 << 13)
+#define SPEC_STAT_PAGE_RCVD (1 << 12)
+#define SPEC_STAT_RESOLVED (1 << 11) /* Speed and Duplex Resolved */
+#define SPEC_STAT_LINK_UP (1 << 10)
+#define SPEC_STAT_CABLE_LEN_MASK (7 << 7)/* Cable Length (100/1000 modes only) */
+#define SPEC_STAT_MDIX (1 << 6)
+#define SPEC_STAT_POLARITY (1 << 1)
+#define SPEC_STAT_JABBER (1 << 0)
+
+#define SPEED_1000 (2 << 14)
+#define SPEED_100 (1 << 14)
+#define SPEED_10 (0 << 14)
+
+#define TBI_ADDR 0x1E /* Ten Bit Interface address */
+
+/* negotiated link parameters */
+#define LINK_SPEED_UNKNOWN 0
+#define LINK_SPEED_10 1
+#define LINK_SPEED_100 2
+#define LINK_SPEED_1000 3
+
+#define LINK_DUPLEX_UNKNOWN 0
+#define LINK_DUPLEX_HALF 1
+#define LINK_DUPLEX_FULL 2
+
+static unsigned int phy_address[] = { 8, 9 };
+
+#define vuint32 volatile u32
+
+/* TX/RX buffer descriptors. MUST be cache line aligned in memory. (32 byte)
+ * This structure is accessed by the ethernet DMA engine which means it
+ * MUST be in LITTLE ENDIAN format */
+struct dma_descriptor {
+ vuint32 start_addr0; /* buffer address, least significant bytes. */
+ vuint32 start_addr1; /* buffer address, most significant bytes. */
+ vuint32 next_descr_addr0;/* next descriptor address, least significant bytes. Must be 64-bit aligned. */
+ vuint32 next_descr_addr1;/* next descriptor address, most significant bytes. */
+ vuint32 vlan_byte_count;/* VLAN tag(top 2 bytes) and byte countt (bottom 2 bytes). */
+ vuint32 config_status; /* Configuration/Status. */
+ vuint32 reserved1; /* reserved to make the descriptor cache line aligned. */
+ vuint32 reserved2; /* reserved to make the descriptor cache line aligned. */
+};
+
+/* last next descriptor address flag */
+#define DMA_DESCR_LAST (1 << 31)
+
+/* TX DMA descriptor config status bits */
+#define DMA_DESCR_TX_EOF (1 << 0) /* end of frame */
+#define DMA_DESCR_TX_SOF (1 << 1) /* start of frame */
+#define DMA_DESCR_TX_PFVLAN (1 << 2)
+#define DMA_DESCR_TX_HUGE (1 << 3)
+#define DMA_DESCR_TX_PAD (1 << 4)
+#define DMA_DESCR_TX_CRC (1 << 5)
+#define DMA_DESCR_TX_DESCR_INT (1 << 14)
+#define DMA_DESCR_TX_RETRY_COUNT 0x000F0000
+#define DMA_DESCR_TX_ONE_COLLISION (1 << 20)
+#define DMA_DESCR_TX_LATE_COLLISION (1 << 24)
+#define DMA_DESCR_TX_UNDERRUN (1 << 25)
+#define DMA_DESCR_TX_RETRY_LIMIT (1 << 26)
+#define DMA_DESCR_TX_OK (1 << 30)
+#define DMA_DESCR_TX_OWNER (1 << 31)
+
+/* RX DMA descriptor status bits */
+#define DMA_DESCR_RX_EOF (1 << 0)
+#define DMA_DESCR_RX_SOF (1 << 1)
+#define DMA_DESCR_RX_VTF (1 << 2)
+#define DMA_DESCR_RX_FRAME_IS_TYPE (1 << 3)
+#define DMA_DESCR_RX_SHORT_FRAME (1 << 4)
+#define DMA_DESCR_RX_HASH_MATCH (1 << 7)
+#define DMA_DESCR_RX_BAD_FRAME (1 << 8)
+#define DMA_DESCR_RX_OVERRUN (1 << 9)
+#define DMA_DESCR_RX_MAX_FRAME_LEN (1 << 11)
+#define DMA_DESCR_RX_CRC_ERROR (1 << 12)
+#define DMA_DESCR_RX_DESCR_INT (1 << 13)
+#define DMA_DESCR_RX_OWNER (1 << 15)
+
+#define RX_BUFFER_SIZE PKTSIZE
+#define NUM_RX_DESC PKTBUFSRX
+
+static struct dma_descriptor tx_descriptor __attribute__ ((aligned(32)));
+
+static struct dma_descriptor rx_descr_array[NUM_RX_DESC]
+ __attribute__ ((aligned(32)));
+
+static struct dma_descriptor *rx_descr_current;
+
+static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis);
+static int tsi108_eth_send (struct eth_device *dev,
+ volatile void *packet, int length);
+static int tsi108_eth_recv (struct eth_device *dev);
+static void tsi108_eth_halt (struct eth_device *dev);
+static unsigned int read_phy (unsigned int base,
+ unsigned int phy_addr, unsigned int phy_reg);
+static void write_phy (unsigned int base,
+ unsigned int phy_addr,
+ unsigned int phy_reg, unsigned int phy_data);
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print phy debug infomation
+ */
+static void dump_phy_regs (unsigned int phy_addr)
+{
+ int i;
+
+ printf ("PHY %d registers\n", phy_addr);
+ for (i = 0; i <= 30; i++) {
+ printf ("%2d 0x%04x\n", i, read_phy (ETH_BASE, phy_addr, i));
+ }
+ printf ("\n");
+
+}
+#else
+#define dump_phy_regs(base) do{}while(0)
+#endif
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print debug infomation
+ */
+static void tx_diag_regs (unsigned int base)
+{
+ int i;
+ unsigned long dummy;
+
+ printf ("TX diagnostics registers\n");
+ reg_TX_DIAGNOSTIC_ADDR(base) = 0x00 | TX_DIAGNOSTIC_ADDR_AI;
+ udelay (1000);
+ dummy = reg_TX_DIAGNOSTIC_DATA(base);
+ for (i = 0x00; i <= 0x05; i++) {
+ udelay (1000);
+ printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base));
+ }
+ reg_TX_DIAGNOSTIC_ADDR(base) = 0x40 | TX_DIAGNOSTIC_ADDR_AI;
+ udelay (1000);
+ dummy = reg_TX_DIAGNOSTIC_DATA(base);
+ for (i = 0x40; i <= 0x47; i++) {
+ udelay (1000);
+ printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base));
+ }
+ printf ("\n");
+
+}
+#else
+#define tx_diag_regs(base) do{}while(0)
+#endif
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print debug infomation
+ */
+static void rx_diag_regs (unsigned int base)
+{
+ int i;
+ unsigned long dummy;
+
+ printf ("RX diagnostics registers\n");
+ reg_RX_DIAGNOSTIC_ADDR(base) = 0x00 | RX_DIAGNOSTIC_ADDR_AI;
+ udelay (1000);
+ dummy = reg_RX_DIAGNOSTIC_DATA(base);
+ for (i = 0x00; i <= 0x05; i++) {
+ udelay (1000);
+ printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base));
+ }
+ reg_RX_DIAGNOSTIC_ADDR(base) = 0x40 | RX_DIAGNOSTIC_ADDR_AI;
+ udelay (1000);
+ dummy = reg_RX_DIAGNOSTIC_DATA(base);
+ for (i = 0x08; i <= 0x0a; i++) {
+ udelay (1000);
+ printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base));
+ }
+ printf ("\n");
+
+}
+#else
+#define rx_diag_regs(base) do{}while(0)
+#endif
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print debug infomation
+ */
+static void debug_mii_regs (unsigned int base)
+{
+ printf ("MII_MGMT_CONFIG 0x%08x\n", reg_MII_MGMT_CONFIG(base));
+ printf ("MII_MGMT_COMMAND 0x%08x\n", reg_MII_MGMT_COMMAND(base));
+ printf ("MII_MGMT_ADDRESS 0x%08x\n", reg_MII_MGMT_ADDRESS(base));
+ printf ("MII_MGMT_CONTROL 0x%08x\n", reg_MII_MGMT_CONTROL(base));
+ printf ("MII_MGMT_STATUS 0x%08x\n", reg_MII_MGMT_STATUS(base));
+ printf ("MII_MGMT_INDICATORS 0x%08x\n", reg_MII_MGMT_INDICATORS(base));
+ printf ("\n");
+
+}
+#else
+#define debug_mii_regs(base) do{}while(0)
+#endif
+
+/*
+ * Wait until the phy bus is non-busy
+ */
+static void phy_wait (unsigned int base, unsigned int condition)
+{
+ int timeout;
+
+ timeout = 0;
+ while (reg_MII_MGMT_INDICATORS(base) & condition) {
+ udelay (10);
+ if (++timeout > 10000) {
+ printf ("ERROR: timeout waiting for phy bus (%d)\n",
+ condition);
+ break;
+ }
+ }
+}
+
+/*
+ * read phy register
+ */
+static unsigned int read_phy (unsigned int base,
+ unsigned int phy_addr, unsigned int phy_reg)
+{
+ unsigned int value;
+
+ phy_wait (base, MII_MGMT_INDICATORS_BUSY);
+
+ reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg;
+
+ /* Ensure that the Read Cycle bit is cleared prior to next read cycle */
+ reg_MII_MGMT_COMMAND(base) = 0;
+
+ /* start the read */
+ reg_MII_MGMT_COMMAND(base) = MII_MGMT_COMMAND_READ_CYCLE;
+
+ /* wait for the read to complete */
+ phy_wait (base,
+ MII_MGMT_INDICATORS_NOT_VALID | MII_MGMT_INDICATORS_BUSY);
+
+ value = reg_MII_MGMT_STATUS(base);
+
+ reg_MII_MGMT_COMMAND(base) = 0;
+
+ return value;
+}
+
+/*
+ * write phy register
+ */
+static void write_phy (unsigned int base,
+ unsigned int phy_addr,
+ unsigned int phy_reg, unsigned int phy_data)
+{
+ phy_wait (base, MII_MGMT_INDICATORS_BUSY);
+
+ reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg;
+
+ /* Ensure that the Read Cycle bit is cleared prior to next cycle */
+ reg_MII_MGMT_COMMAND(base) = 0;
+
+ /* start the write */
+ reg_MII_MGMT_CONTROL(base) = phy_data;
+}
+
+/*
+ * configure the marvell 88e1111 phy
+ */
+static int marvell_88e_phy_config (struct eth_device *dev, int *speed,
+ int *duplex)
+{
+ unsigned long base;
+ unsigned long phy_addr;
+ unsigned int phy_status;
+ unsigned int phy_spec_status;
+ int timeout;
+ int phy_speed;
+ int phy_duplex;
+ unsigned int value;
+
+ phy_speed = LINK_SPEED_UNKNOWN;
+ phy_duplex = LINK_DUPLEX_UNKNOWN;
+
+ base = dev->iobase;
+ phy_addr = (unsigned long)dev->priv;
+
+ /* Take the PHY out of reset. */
+ write_phy (ETH_BASE, phy_addr, PHY_CTRL_REG, PHY_CTRL_RESET);
+
+ /* Wait for the reset process to complete. */
+ udelay (10);
+ timeout = 0;
+ while ((phy_status =
+ read_phy (ETH_BASE, phy_addr, PHY_CTRL_REG)) & PHY_CTRL_RESET) {
+ udelay (10);
+ if (++timeout > 10000) {
+ printf ("ERROR: timeout waiting for phy reset\n");
+ break;
+ }
+ }
+
+ /* TBI Configuration. */
+ write_phy (base, TBI_ADDR, TBI_CONTROL_2, TBI_CONTROL_2_G_MII_MODE |
+ TBI_CONTROL_2_RECEIVE_CLOCK_SELECT);
+ /* Wait for the link to be established. */
+ timeout = 0;
+ do {
+ udelay (20000);
+ phy_status = read_phy (ETH_BASE, phy_addr, PHY_STATUS_REG);
+ if (++timeout > 100) {
+ debug_lev(1, "ERROR: unable to establish link!!!\n");
+ break;
+ }
+ } while ((phy_status & PHY_STAT_LINK_UP) == 0);
+
+ if ((phy_status & PHY_STAT_LINK_UP) == 0)
+ return 0;
+
+ value = 0;
+ phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG);
+ if (phy_spec_status & SPEC_STAT_RESOLVED) {
+ switch (phy_spec_status & SPEC_STAT_SPEED_MASK) {
+ case SPEED_1000:
+ phy_speed = LINK_SPEED_1000;
+ value |= PHY_CTRL_SPEED1;
+ break;
+ case SPEED_100:
+ phy_speed = LINK_SPEED_100;
+ value |= PHY_CTRL_SPEED0;
+ break;
+ case SPEED_10:
+ phy_speed = LINK_SPEED_10;
+ break;
+ }
+ if (phy_spec_status & SPEC_STAT_FULL_DUP) {
+ phy_duplex = LINK_DUPLEX_FULL;
+ value |= PHY_CTRL_FULL_DUPLEX;
+ } else
+ phy_duplex = LINK_DUPLEX_HALF;
+ }
+ /* set TBI speed */
+ write_phy (base, TBI_ADDR, PHY_CTRL_REG, value);
+ write_phy (base, TBI_ADDR, PHY_AN_ADV_REG, 0x0060);
+
+#if TSI108_ETH_DEBUG > 0
+ printf ("%s link is up", dev->name);
+ phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG);
+ if (phy_spec_status & SPEC_STAT_RESOLVED) {
+ switch (phy_speed) {
+ case LINK_SPEED_1000:
+ printf (", 1000 Mbps");
+ break;
+ case LINK_SPEED_100:
+ printf (", 100 Mbps");
+ break;
+ case LINK_SPEED_10:
+ printf (", 10 Mbps");
+ break;
+ }
+ if (phy_duplex == LINK_DUPLEX_FULL)
+ printf (", Full duplex");
+ else
+ printf (", Half duplex");
+ }
+ printf ("\n");
+#endif
+
+ dump_phy_regs (TBI_ADDR);
+ if (speed)
+ *speed = phy_speed;
+ if (duplex)
+ *duplex = phy_duplex;
+
+ return 1;
+}
+
+/*
+ * External interface
+ *
+ * register the tsi108 ethernet controllers with the multi-ethernet system
+ */
+int tsi108_eth_initialize (bd_t * bis)
+{
+ struct eth_device *dev;
+ int index;
+
+ for (index = 0; index < CONFIG_TSI108_ETH_NUM_PORTS; index++) {
+ dev = (struct eth_device *)malloc(sizeof(struct eth_device));
+
+ sprintf (dev->name, "TSI108_eth%d", index);
+
+ dev->iobase = ETH_BASE + (index * ETH_PORT_OFFSET);
+ dev->priv = (void *)(phy_address[index]);
+ dev->init = tsi108_eth_probe;
+ dev->halt = tsi108_eth_halt;
+ dev->send = tsi108_eth_send;
+ dev->recv = tsi108_eth_recv;
+
+ eth_register(dev);
+ }
+ return index;
+}
+
+/*
+ * probe for and initialize a single ethernet interface
+ */
+static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis)
+{
+ unsigned long base;
+ unsigned long value;
+ int index;
+ struct dma_descriptor *tx_descr;
+ struct dma_descriptor *rx_descr;
+ int speed;
+ int duplex;
+
+ base = dev->iobase;
+
+ reg_PORT_CONTROL(base) = PORT_CONTROL_STE | PORT_CONTROL_BPT;
+
+ /* Bring DMA/FIFO out of reset. */
+ reg_TX_CONFIG(base) = 0x00000000;
+ reg_RX_CONFIG(base) = 0x00000000;
+
+ reg_TX_THRESHOLDS(base) = (192 << 16) | 192;
+ reg_RX_THRESHOLDS(base) = (192 << 16) | 112;
+
+ /* Bring MAC out of reset. */
+ reg_MAC_CONFIG_1(base) = 0x00000000;
+
+ /* DMA MAC configuration. */
+ reg_MAC_CONFIG_1(base) =
+ MAC_CONFIG_1_RX_ENABLE | MAC_CONFIG_1_TX_ENABLE;
+
+ reg_MII_MGMT_CONFIG(base) = MII_MGMT_CONFIG_NO_PREAMBLE;
+ reg_MAXIMUM_FRAME_LENGTH(base) = RX_BUFFER_SIZE;
+
+ /* Note: Early tsi108 manual did not have correct byte order
+ * for the station address.*/
+ reg_STATION_ADDRESS_1(base) = (dev->enetaddr[5] << 24) |
+ (dev->enetaddr[4] << 16) |
+ (dev->enetaddr[3] << 8) | (dev->enetaddr[2] << 0);
+
+ reg_STATION_ADDRESS_2(base) = (dev->enetaddr[1] << 24) |
+ (dev->enetaddr[0] << 16);
+
+ if (marvell_88e_phy_config(dev, &speed, &duplex) == 0)
+ return 0;
+
+ value =
+ MAC_CONFIG_2_PREAMBLE_LENGTH(7) | MAC_CONFIG_2_PAD_CRC |
+ MAC_CONFIG_2_CRC_ENABLE;
+ if (speed == LINK_SPEED_1000)
+ value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_BYTE);
+ else {
+ value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_NIBBLE);
+ reg_PORT_CONTROL(base) |= PORT_CONTROL_SPD;
+ }
+ if (duplex == LINK_DUPLEX_FULL) {
+ value |= MAC_CONFIG_2_FULL_DUPLEX;
+ reg_PORT_CONTROL(base) &= ~PORT_CONTROL_BPT;
+ } else
+ reg_PORT_CONTROL(base) |= PORT_CONTROL_BPT;
+ reg_MAC_CONFIG_2(base) = value;
+
+ reg_RX_CONFIG(base) = RX_CONFIG_SE;
+ reg_RX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY;
+ reg_RX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY;
+
+ /* initialize the RX DMA descriptors */
+ rx_descr = &rx_descr_array[0];
+ rx_descr_current = rx_descr;
+ for (index = 0; index < NUM_RX_DESC; index++) {
+ /* make sure the receive buffers are not in cache */
+ invalidate_dcache_range((unsigned long)NetRxPackets[index],
+ (unsigned long)NetRxPackets[index] +
+ RX_BUFFER_SIZE);
+ rx_descr->start_addr0 =
+ cpu_to_le32((vuint32) NetRxPackets[index]);
+ rx_descr->start_addr1 = 0;
+ rx_descr->next_descr_addr0 =
+ cpu_to_le32((vuint32) (rx_descr + 1));
+ rx_descr->next_descr_addr1 = 0;
+ rx_descr->vlan_byte_count = 0;
+ rx_descr->config_status = cpu_to_le32((RX_BUFFER_SIZE << 16) |
+ DMA_DESCR_RX_OWNER);
+ rx_descr++;
+ }
+ rx_descr--;
+ rx_descr->next_descr_addr0 = 0;
+ rx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST);
+ /* Push the descriptors to RAM so the ethernet DMA can see them */
+ invalidate_dcache_range((unsigned long)rx_descr_array,
+ (unsigned long)rx_descr_array +
+ sizeof(rx_descr_array));
+
+ /* enable RX queue */
+ reg_RX_CONTROL(base) = TX_CONTROL_GO | 0x01;
+ reg_RX_QUEUE_0_PTR_LOW(base) = (u32) rx_descr_current;
+ /* enable receive DMA */
+ reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID;
+
+ reg_TX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY;
+ reg_TX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY;
+
+ /* initialize the TX DMA descriptor */
+ tx_descr = &tx_descriptor;
+
+ tx_descr->start_addr0 = 0;
+ tx_descr->start_addr1 = 0;
+ tx_descr->next_descr_addr0 = 0;
+ tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST);
+ tx_descr->vlan_byte_count = 0;
+ tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OK |
+ DMA_DESCR_TX_SOF |
+ DMA_DESCR_TX_EOF);
+ /* enable TX queue */
+ reg_TX_CONTROL(base) = TX_CONTROL_GO | 0x01;
+
+ return 1;
+}
+
+/*
+ * send a packet
+ */
+static int tsi108_eth_send (struct eth_device *dev,
+ volatile void *packet, int length)
+{
+ unsigned long base;
+ int timeout;
+ struct dma_descriptor *tx_descr;
+ unsigned long status;
+
+ base = dev->iobase;
+ tx_descr = &tx_descriptor;
+
+ /* Wait until the last packet has been transmitted. */
+ timeout = 0;
+ do {
+ /* make sure we see the changes made by the DMA engine */
+ invalidate_dcache_range((unsigned long)tx_descr,
+ (unsigned long)tx_descr +
+ sizeof(struct dma_descriptor));
+
+ if (timeout != 0)
+ udelay (15);
+ if (++timeout > 10000) {
+ tx_diag_regs(base);
+ debug_lev(1,
+ "ERROR: timeout waiting for last transmit packet to be sent\n");
+ return 0;
+ }
+ } while (tx_descr->config_status & cpu_to_le32(DMA_DESCR_TX_OWNER));
+
+ status = le32_to_cpu(tx_descr->config_status);
+ if ((status & DMA_DESCR_TX_OK) == 0) {
+#ifdef TX_PRINT_ERRORS
+ printf ("TX packet error: 0x%08x\n %s%s%s%s\n", status,
+ status & DMA_DESCR_TX_OK ? "tx error, " : "",
+ status & DMA_DESCR_TX_RETRY_LIMIT ?
+ "retry limit reached, " : "",
+ status & DMA_DESCR_TX_UNDERRUN ? "underrun, " : "",
+ status & DMA_DESCR_TX_LATE_COLLISION ? "late collision, "
+ : "");
+#endif
+ }
+
+ debug_lev (9, "sending packet %d\n", length);
+ tx_descr->start_addr0 = cpu_to_le32((vuint32) packet);
+ tx_descr->start_addr1 = 0;
+ tx_descr->next_descr_addr0 = 0;
+ tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST);
+ tx_descr->vlan_byte_count = cpu_to_le32(length);
+ tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OWNER |
+ DMA_DESCR_TX_CRC |
+ DMA_DESCR_TX_PAD |
+ DMA_DESCR_TX_SOF |
+ DMA_DESCR_TX_EOF);
+
+ invalidate_dcache_range((unsigned long)tx_descr,
+ (unsigned long)tx_descr +
+ sizeof(struct dma_descriptor));
+
+ invalidate_dcache_range((unsigned long)packet,
+ (unsigned long)packet + length);
+
+ reg_TX_QUEUE_0_PTR_LOW(base) = (u32) tx_descr;
+ reg_TX_QUEUE_0_PTR_HIGH(base) = TX_QUEUE_0_PTR_HIGH_VALID;
+
+ return length;
+}
+
+/*
+ * Check for received packets and send them up the protocal stack
+ */
+static int tsi108_eth_recv (struct eth_device *dev)
+{
+ struct dma_descriptor *rx_descr;
+ unsigned long base;
+ int length = 0;
+ unsigned long status;
+ volatile uchar *buffer;
+
+ base = dev->iobase;
+
+ /* make sure we see the changes made by the DMA engine */
+ invalidate_dcache_range ((unsigned long)rx_descr_array,
+ (unsigned long)rx_descr_array +
+ sizeof(rx_descr_array));
+
+ /* process all of the received packets */
+ rx_descr = rx_descr_current;
+ while ((rx_descr->config_status & cpu_to_le32(DMA_DESCR_RX_OWNER)) == 0) {
+ /* check for error */
+ status = le32_to_cpu(rx_descr->config_status);
+ if (status & DMA_DESCR_RX_BAD_FRAME) {
+#ifdef RX_PRINT_ERRORS
+ printf ("RX packet error: 0x%08x\n %s%s%s%s%s%s\n",
+ status,
+ status & DMA_DESCR_RX_FRAME_IS_TYPE ? "too big, "
+ : "",
+ status & DMA_DESCR_RX_SHORT_FRAME ? "too short, "
+ : "",
+ status & DMA_DESCR_RX_BAD_FRAME ? "bad frame, " :
+ "",
+ status & DMA_DESCR_RX_OVERRUN ? "overrun, " : "",
+ status & DMA_DESCR_RX_MAX_FRAME_LEN ?
+ "max length, " : "",
+ status & DMA_DESCR_RX_CRC_ERROR ? "CRC error, " :
+ "");
+#endif
+ } else {
+ length =
+ le32_to_cpu(rx_descr->vlan_byte_count) & 0xFFFF;
+
+ /*** process packet ***/
+ buffer =
+ (volatile uchar
+ *)(le32_to_cpu (rx_descr->start_addr0));
+ NetReceive (buffer, length);
+
+ invalidate_dcache_range ((unsigned long)buffer,
+ (unsigned long)buffer +
+ RX_BUFFER_SIZE);
+ }
+ /* Give this buffer back to the DMA engine */
+ rx_descr->vlan_byte_count = 0;
+ rx_descr->config_status = cpu_to_le32 ((RX_BUFFER_SIZE << 16) |
+ DMA_DESCR_RX_OWNER);
+ /* move descriptor pointer forward */
+ rx_descr =
+ (struct dma_descriptor
+ *)(le32_to_cpu (rx_descr->next_descr_addr0));
+ if (rx_descr == 0)
+ rx_descr = &rx_descr_array[0];
+ }
+ /* remember where we are for next time */
+ rx_descr_current = rx_descr;
+
+ /* If the DMA engine has reached the end of the queue
+ * start over at the begining */
+ if (reg_RX_EXTENDED_STATUS(base) & RX_EXTENDED_STATUS_EOQ_0) {
+
+ reg_RX_EXTENDED_STATUS(base) = RX_EXTENDED_STATUS_EOQ_0;
+ reg_RX_QUEUE_0_PTR_LOW(base) = (u32) & rx_descr_array[0];
+ reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID;
+ }
+
+ return length;
+}
+
+/*
+ * disable an ethernet interface
+ */
+static void tsi108_eth_halt (struct eth_device *dev)
+{
+ unsigned long base;
+
+ base = dev->iobase;
+
+ /* Put DMA/FIFO into reset state. */
+ reg_TX_CONFIG(base) = TX_CONFIG_RST;
+ reg_RX_CONFIG(base) = RX_CONFIG_RST;
+
+ /* Put MAC into reset state. */
+ reg_MAC_CONFIG_1(base) = MAC_CONFIG_1_SOFT_RESET;
+}
+
+#endif
diff --git a/drivers/tsi108_i2c.c b/drivers/tsi108_i2c.c
new file mode 100644
index 0000000..c100cb8
--- /dev/null
+++ b/drivers/tsi108_i2c.c
@@ -0,0 +1,298 @@
+/*
+ * (C) Copyright 2004 Tundra Semiconductor Corp.
+ * Author: Alex Bounine
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+
+#ifdef CONFIG_TSI108_I2C
+#include <tsi108.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+
+#define I2C_DELAY 100000
+#undef DEBUG_I2C
+
+#ifdef DEBUG_I2C
+#define DPRINT(x) printf (x)
+#else
+#define DPRINT(x)
+#endif
+
+/* All functions assume that Tsi108 I2C block is the only master on the bus */
+/* I2C read helper function */
+
+static int i2c_read_byte (
+ uint i2c_chan, /* I2C channel number: 0 - main, 1 - SDC SPD */
+ uchar chip_addr,/* I2C device address on the bus */
+ uint byte_addr, /* Byte address within I2C device */
+ uchar * buffer /* pointer to data buffer */
+ )
+{
+ u32 temp;
+ u32 to_count = I2C_DELAY;
+ u32 op_status = TSI108_I2C_TIMEOUT_ERR;
+ u32 chan_offset = TSI108_I2C_OFFSET;
+
+ DPRINT (("I2C read_byte() %d 0x%02x 0x%02x\n",
+ i2c_chan, chip_addr, byte_addr));
+
+ if (0 != i2c_chan)
+ chan_offset = TSI108_I2C_SDRAM_OFFSET;
+
+ /* Check if I2C operation is in progress */
+ temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+
+ if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS |
+ I2C_CNTRL2_START))) {
+ /* Set device address and operation (read = 0) */
+ temp = (byte_addr << 16) | ((chip_addr & 0x07) << 8) |
+ ((chip_addr >> 3) & 0x0F);
+ *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
+ temp;
+
+ /* Issue the read command
+ * (at this moment all other parameters are 0
+ * (size = 1 byte, lane = 0)
+ */
+
+ *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
+ (I2C_CNTRL2_START);
+
+ /* Wait until operation completed */
+ do {
+ /* Read I2C operation status */
+ temp =
+ *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset +
+ I2C_CNTRL2);
+
+ if (0 ==
+ (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_START)))
+ {
+ if (0 ==
+ (temp &
+ (I2C_CNTRL2_I2C_CFGERR |
+ I2C_CNTRL2_I2C_TO_ERR))
+ ) {
+ op_status = TSI108_I2C_SUCCESS;
+
+ temp = *(u32 *) (CFG_TSI108_CSR_BASE +
+ chan_offset +
+ I2C_RD_DATA);
+
+ *buffer = (u8) (temp & 0xFF);
+ } else {
+ /* report HW error */
+ op_status = TSI108_I2C_IF_ERROR;
+
+ DPRINT (("I2C HW error reported: 0x%02x\n", temp));
+ }
+
+ break;
+ }
+ } while (to_count--);
+ } else {
+ op_status = TSI108_I2C_IF_BUSY;
+
+ DPRINT (("I2C Transaction start failed: 0x%02x\n", temp));
+ }
+
+ DPRINT (("I2C read_byte() status: 0x%02x\n", op_status));
+ return op_status;
+}
+
+/*
+ * I2C Read interface as defined in "include/i2c.h" :
+ * chip_addr: I2C chip address, range 0..127
+ * (to read from SPD channel EEPROM use (0xD0 ... 0xD7)
+ * NOTE: The bit 7 in the chip_addr serves as a channel select.
+ * This hack is for enabling "isdram" command on Tsi108 boards
+ * without changes to common code. Used for I2C reads only.
+ * byte_addr: Memory or register address within the chip
+ * alen: Number of bytes to use for addr (typically 1, 2 for larger
+ * memories, 0 for register type devices with only one
+ * register)
+ * buffer: Pointer to destination buffer for data to be read
+ * len: How many bytes to read
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+
+int i2c_read (uchar chip_addr, uint byte_addr, int alen,
+ uchar * buffer, int len)
+{
+ u32 op_status = TSI108_I2C_PARAM_ERR;
+ u32 i2c_if = 0;
+
+ /* Hack to support second (SPD) I2C controller (SPD EEPROM read only).*/
+ if (0xD0 == (chip_addr & ~0x07)) {
+ i2c_if = 1;
+ chip_addr &= 0x7F;
+ }
+ /* Check for valid I2C address */
+ if (chip_addr <= 0x7F && (byte_addr + len) <= (0x01 << (alen * 8))) {
+ while (len--) {
+ op_status =
+ i2c_read_byte(i2c_if, chip_addr, byte_addr++,
+ buffer++);
+
+ if (TSI108_I2C_SUCCESS != op_status) {
+ DPRINT (("I2C read_byte() failed: 0x%02x (%d left)\n", op_status, len));
+
+ break;
+ }
+ }
+ }
+
+ DPRINT (("I2C read() status: 0x%02x\n", op_status));
+ return op_status;
+}
+
+/* I2C write helper function */
+
+static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
+ uint byte_addr, /* Byte address within I2C device */
+ uchar * buffer /* pointer to data buffer */
+ )
+{
+ u32 temp;
+ u32 to_count = I2C_DELAY;
+ u32 op_status = TSI108_I2C_TIMEOUT_ERR;
+
+ /* Check if I2C operation is in progress */
+ temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+
+ if (0 ==
+ (temp &
+ (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START)))
+ {
+ /* Place data into the I2C Tx Register */
+ *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ I2C_TX_DATA) = (u32) * buffer;
+
+ /* Set device address and operation */
+ temp =
+ I2C_CNTRL1_I2CWRITE | (byte_addr << 16) |
+ ((chip_addr & 0x07) << 8) | ((chip_addr >> 3) & 0x0F);
+ *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ I2C_CNTRL1) = temp;
+
+ /* Issue the write command (at this moment all other parameters
+ * are 0 (size = 1 byte, lane = 0)
+ */
+
+ *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ I2C_CNTRL2) = (I2C_CNTRL2_START);
+
+ op_status = TSI108_I2C_TIMEOUT_ERR;
+
+ /* Wait until operation completed */
+ do {
+ /* Read I2C operation status */
+ temp =
+ *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ I2C_CNTRL2);
+
+ if (0 ==
+ (temp & (I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START)))
+ {
+ if (0 ==
+ (temp &
+ (I2C_CNTRL2_I2C_CFGERR |
+ I2C_CNTRL2_I2C_TO_ERR))) {
+ op_status = TSI108_I2C_SUCCESS;
+ } else {
+ /* report detected HW error */
+ op_status = TSI108_I2C_IF_ERROR;
+
+ DPRINT (("I2C HW error reported: 0x%02x\n", temp));
+ }
+
+ break;
+ }
+
+ } while (to_count--);
+ } else {
+ op_status = TSI108_I2C_IF_BUSY;
+
+ DPRINT (("I2C Transaction start failed: 0x%02x\n", temp));
+ }
+
+ return op_status;
+}
+
+/*
+ * I2C Write interface as defined in "include/i2c.h" :
+ * chip_addr: I2C chip address, range 0..127
+ * byte_addr: Memory or register address within the chip
+ * alen: Number of bytes to use for addr (typically 1, 2 for larger
+ * memories, 0 for register type devices with only one
+ * register)
+ * buffer: Pointer to data to be written
+ * len: How many bytes to write
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+
+int i2c_write (uchar chip_addr, uint byte_addr, int alen, uchar * buffer,
+ int len)
+{
+ u32 op_status = TSI108_I2C_PARAM_ERR;
+
+ /* Check for valid I2C address */
+ if (chip_addr <= 0x7F && (byte_addr + len) <= (0x01 << (alen * 8))) {
+ while (len--) {
+ op_status =
+ i2c_write_byte (chip_addr, byte_addr++, buffer++);
+
+ if (TSI108_I2C_SUCCESS != op_status) {
+ DPRINT (("I2C write_byte() failed: 0x%02x (%d left)\n", op_status, len));
+
+ break;
+ }
+ }
+ }
+
+ return op_status;
+}
+
+/*
+ * I2C interface function as defined in "include/i2c.h".
+ * Probe the given I2C chip address by reading single byte from offset 0.
+ * Returns 0 if a chip responded, not 0 on failure.
+ */
+
+int i2c_probe (uchar chip)
+{
+ u32 tmp;
+
+ /*
+ * Try to read the first location of the chip.
+ * The Tsi108 HW doesn't support sending just the chip address
+ * and checkong for an <ACK> back.
+ */
+ return i2c_read (chip, 0, 1, (char *)&tmp, 1);
+}
+
+#endif /* (CONFIG_COMMANDS & CFG_CMD_I2C) */
+#endif /* CONFIG_TSI108_I2C */
diff --git a/drivers/tsi108_pci.c b/drivers/tsi108_pci.c
new file mode 100644
index 0000000..9f606df
--- /dev/null
+++ b/drivers/tsi108_pci.c
@@ -0,0 +1,178 @@
+/*
+ * (C) Copyright 2004 Tundra Semiconductor Corp.
+ * Alex Bounine <alexandreb@tundra.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * PCI initialisation for the Tsi108 EMU board.
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_TSI108_PCI
+
+#include <common.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <tsi108.h>
+
+struct pci_controller local_hose;
+
+void tsi108_clear_pci_error (void)
+{
+ u32 err_stat, err_addr, pci_stat;
+
+ /*
+ * Quietly clear errors signalled as result of PCI/X configuration read
+ * requests.
+ */
+ /* Read PB Error Log Registers */
+ err_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+ TSI108_PB_REG_OFFSET + PB_ERRCS);
+ err_addr = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+ TSI108_PB_REG_OFFSET + PB_AERR);
+ if (err_stat & PB_ERRCS_ES) {
+ /* Clear PCI/X bus errors if applicable */
+ if ((err_addr & 0xFF000000) == CFG_PCI_CFG_BASE) {
+ /* Clear error flag */
+ *(u32 *) (CFG_TSI108_CSR_BASE +
+ TSI108_PB_REG_OFFSET + PB_ERRCS) =
+ PB_ERRCS_ES;
+
+ /* Clear read error reported in PB_ISR */
+ *(u32 *) (CFG_TSI108_CSR_BASE +
+ TSI108_PB_REG_OFFSET + PB_ISR) =
+ PB_ISR_PBS_RD_ERR;
+
+ /* Clear errors reported by PCI CSR (Normally Master Abort) */
+ pci_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+ TSI108_PCI_REG_OFFSET +
+ PCI_CSR);
+ *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+ TSI108_PCI_REG_OFFSET + PCI_CSR) =
+ pci_stat;
+
+ *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+ TSI108_PCI_REG_OFFSET +
+ PCI_IRP_STAT) = PCI_IRP_STAT_P_CSR;
+ }
+ }
+
+ return;
+}
+
+unsigned int __get_pci_config_dword (u32 addr)
+{
+ unsigned int retval;
+
+ __asm__ __volatile__ (" lwbrx %0,0,%1\n"
+ "1: eieio\n"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: li %0,-1\n"
+ " b 2b\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 2\n"
+ " .long 1b,3b\n"
+ ".text":"=r"(retval):"r"(addr));
+
+ return (retval);
+}
+
+static int tsi108_read_config_dword (struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32 * value)
+{
+ dev &= (CFG_PCI_CFG_SIZE - 1);
+ dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc));
+ *value = __get_pci_config_dword(dev);
+ if (0xFFFFFFFF == *value)
+ tsi108_clear_pci_error ();
+ return 0;
+}
+
+static int tsi108_write_config_dword (struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32 value)
+{
+ dev &= (CFG_PCI_CFG_SIZE - 1);
+ dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc));
+
+ out_le32 ((volatile unsigned *)dev, value);
+
+ return 0;
+}
+
+void pci_init_board (void)
+{
+ struct pci_controller *hose = (struct pci_controller *)&local_hose;
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ pci_set_region (hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* PCI memory space */
+ pci_set_region (hose->regions + 1,
+ CFG_PCI_MEM_BUS,
+ CFG_PCI_MEM_PHYS, CFG_PCI_MEM_SIZE, PCI_REGION_MEM);
+
+ /* PCI I/O space */
+ pci_set_region (hose->regions + 2,
+ CFG_PCI_IO_BUS,
+ CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ pci_set_ops (hose,
+ pci_hose_read_config_byte_via_dword,
+ pci_hose_read_config_word_via_dword,
+ tsi108_read_config_dword,
+ pci_hose_write_config_byte_via_dword,
+ pci_hose_write_config_word_via_dword,
+ tsi108_write_config_dword);
+
+ pci_register_hose (hose);
+
+ hose->last_busno = pci_hose_scan (hose);
+
+ debug ("Done PCI initialization\n");
+ return;
+}
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_pci_setup (void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+ p = (u32 *)ft_get_prop (blob, "/" OF_TSI "/pci@1000/bus-range", &len);
+ if (p != NULL) {
+ p[0] = local_hose.first_busno;
+ p[1] = local_hose.last_busno;
+ }
+
+}
+#endif
+
+#endif /* CONFIG_TSI108_PCI */
diff --git a/include/74xx_7xx.h b/include/74xx_7xx.h
index 33e396a..ba73bae 100644
--- a/include/74xx_7xx.h
+++ b/include/74xx_7xx.h
@@ -111,7 +111,7 @@ typedef enum __cpu_t {
CPU_750CX, CPU_750FX, CPU_750GX,
CPU_7400,
CPU_7410,
- CPU_7448,
+ CPU_7447A, CPU_7448,
CPU_7450, CPU_7455, CPU_7457,
CPU_UNKNOWN} cpu_t;
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index 8bc61b6..5f0f0b4 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -49,6 +49,9 @@ typedef struct global_data {
unsigned long scc_clk;
unsigned long brg_clk;
#endif
+#if defined(CONFIG_MPC7448HPC2)
+ unsigned long mem_clk;
+#endif
#if defined(CONFIG_MPC83XX)
/* There are other clocks in the MPC83XX */
u32 csb_clk;
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
new file mode 100644
index 0000000..6bad515
--- /dev/null
+++ b/include/configs/mpc7448hpc2.h
@@ -0,0 +1,411 @@
+/*
+ * Copyright (c) 2005 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2006
+ * Alex Bounine , Tundra Semiconductor Corp.
+ * Roy Zang , <tie-fei.zang@freescale.com> Freescale Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board specific configuration options for Freescale
+ * MPC7448HPC2 (High-Performance Computing II) (Taiga) board
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/* Board Configuration Definitions */
+/* MPC7448HPC2 (High-Performance Computing II) (Taiga) board */
+
+#define CONFIG_MPC7448HPC2
+
+#define CONFIG_74xx
+#define CONFIG_750FX /* this option to enable init of extended BATs */
+#define CONFIG_ALTIVEC /* undef to disable */
+
+#define CFG_BOARD_NAME "MPC7448 HPC II"
+#define CONFIG_IDENT_STRING " Freescale MPC7448 HPC II"
+
+#define CFG_OCN_CLK 133000000 /* 133 MHz */
+#define CFG_CONFIG_BUS_CLK 133000000
+
+#define CFG_CLK_SPREAD /* Enable Spread-Spectrum Clock generation */
+
+#undef CONFIG_ECC /* disable ECC support */
+
+/* Board-specific Initialization Functions to be called */
+#define CFG_BOARD_ASM_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_HAS_ETH1
+
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */
+
+/*#define CFG_HUSH_PARSER */
+#undef CFG_HUSH_PARSER
+
+#define CFG_PROMPT_HUSH_PS2 "> "
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,7448@0"
+#define OF_TSI "tsi108@c0000000"
+#define OF_TBCLK (bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH "/tsi108@c0000000/serial@7808"
+
+/*
+ * The following defines let you select what serial you want to use
+ * for your console driver.
+ *
+ * what to do:
+ * If you have hacked a serial cable onto the second DUART channel,
+ * change the CFG_DUART port from 1 to 0 below.
+ *
+ */
+
+#define CONFIG_CONS_INDEX 1
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK CFG_OCN_CLK * 8
+
+#define CFG_NS16550_COM1 (CFG_TSI108_CSR_RST_BASE+0x7808)
+#define CFG_NS16550_COM2 (CFG_TSI108_CSR_RST_BASE+0x7C08)
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#undef CONFIG_BOOTARGS
+/* #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\"
+ * to mount root filesystem over NFS;echo" */
+
+#if (CONFIG_BOOTDELAY >= 0)
+#define CONFIG_BOOTCOMMAND "tftpboot 0x400000 zImage.initrd.elf;\
+ setenv bootargs $(bootargs) $(bootargs_root) nfsroot=$(serverip):$(rootpath) \
+ ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000; "
+
+#define CONFIG_BOOTARGS "console=ttyS0,115200"
+#endif
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+
+#define CONFIG_SERIAL "No. 1"
+
+/* Networking Configuration */
+
+#define KSEG1ADDR(a) (a) /* Needed by the rtl8139 driver */
+
+#define CONFIG_TSI108_ETH
+#define CONFIG_TSI108_ETH_NUM_PORTS 2
+
+#define CONFIG_NET_MULTI
+
+#define CONFIG_BOOTFILE zImage.initrd.elf
+#define CONFIG_LOADADDR 0x400000
+
+/*-------------------------------------------------------------------------- */
+
+#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
+#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
+ CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_ASKENV \
+ | CFG_CMD_CACHE \
+ | CFG_CMD_PCI \
+ | CFG_CMD_I2C \
+ | CFG_CMD_SDRAM \
+ | CFG_CMD_EEPROM \
+ | CFG_CMD_FLASH \
+ | CFG_CMD_ENV \
+ | CFG_CMD_BSP \
+ | CFG_CMD_DHCP \
+ | CFG_CMD_PING \
+ | CFG_CMD_DATE)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*set date in u-boot*/
+#define CONFIG_RTC_M48T35A
+#define CFG_NVRAM_BASE_ADDR 0xfc000000
+#define CFG_NVRAM_SIZE 0x8000
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_VERSION_VARIABLE 1
+#define CONFIG_TSI108_I2C
+
+#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C EEPROM page 1 */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)/* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x00400000 /* default load address */
+
+#define CFG_HZ 1000 /* decr freq: 1ms ticks */
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+
+/*
+ * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS
+ * To an unused memory region. The stack will remain in cache until RAM
+ * is initialized
+ */
+#undef CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR 0x07d00000 /* unused memory region */
+#define CFG_INIT_RAM_END 0x4000/* larger space - we have SDRAM initialized */
+
+#define CFG_GBL_DATA_SIZE 128/* size in bytes reserved for init data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+
+#define CFG_SDRAM_BASE 0x00000000 /* first 256 MB of SDRAM */
+#define CFG_SDRAM1_BASE 0x10000000 /* next 256MB of SDRAM */
+
+#define CFG_SDRAM2_BASE 0x40000000 /* beginning of non-cacheable alias for SDRAM - first 256MB */
+#define CFG_SDRAM3_BASE 0x50000000 /* next Non-Cacheable 256MB of SDRAM */
+
+#define CFG_PCI_PFM_BASE 0x80000000 /* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */
+
+#define CFG_PCI_MEM32_BASE 0xE0000000 /* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */
+
+#define CFG_MISC_REGION_BASE 0xf0000000 /* Base Address for (PCI/X + Flash) region */
+
+#define CFG_FLASH_BASE 0xff000000 /* Base Address of Flash device */
+#define CFG_FLASH_BASE2 0xfe000000 /* Alternate Flash Base Address */
+
+#define CONFIG_VERY_BIG_RAM /* we will use up to 256M memory for cause we are short of BATS */
+
+#define PCI0_IO_BASE_BOOTM 0xfd000000
+
+#define CFG_RESET_ADDRESS 0x3fffff00
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* u-boot code base */
+#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
+
+/* Peripheral Device section */
+
+/*
+ * Resources on the Tsi108
+ */
+
+#define CFG_TSI108_CSR_RST_BASE 0xC0000000 /* Tsi108 CSR base after reset */
+#define CFG_TSI108_CSR_BASE CFG_TSI108_CSR_RST_BASE /* Runtime Tsi108 CSR base */
+
+#define ENABLE_PCI_CSR_BAR /* enables access to Tsi108 CSRs from the PCI/X bus */
+
+#undef DISABLE_PBM
+
+/*
+ * PCI stuff
+ *
+ */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_TSI108_PCI /* include tsi108 pci support */
+
+#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+/* PCI MEMORY MAP section */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x80000000
+
+/* PCI Memory Space */
+#define CFG_PCI_MEM_BUS (CFG_PCI_MEM_PHYS)
+#define CFG_PCI_MEM_PHYS (CFG_PCI_MEM32_BASE) /* 0xE0000000 */
+#define CFG_PCI_MEM_SIZE 0x10000000 /* 256 MB space for PCI/X Mem + SDRAM OCN */
+
+/* PCI I/O Space */
+#define CFG_PCI_IO_BUS 0x00000000
+#define CFG_PCI_IO_PHYS 0xfa000000 /* Changed from fd000000 */
+
+#define CFG_PCI_IO_SIZE 0x01000000 /* 16MB */
+
+#define _IO_BASE 0x00000000 /* points to PCI I/O space */
+
+/* PCI Config Space mapping */
+#define CFG_PCI_CFG_BASE 0xfb000000 /* Changed from FE000000 */
+#define CFG_PCI_CFG_SIZE 0x01000000 /* 16MB */
+
+#define CFG_IBAT0U 0xFE0003FF
+#define CFG_IBAT0L 0xFE000002
+
+#define CFG_IBAT1U 0x00007FFF
+#define CFG_IBAT1L 0x00000012
+
+#define CFG_IBAT2U 0x80007FFF
+#define CFG_IBAT2L 0x80000022
+
+#define CFG_IBAT3U 0x00000000
+#define CFG_IBAT3L 0x00000000
+
+#define CFG_IBAT4U 0x00000000
+#define CFG_IBAT4L 0x00000000
+
+#define CFG_IBAT5U 0x00000000
+#define CFG_IBAT5L 0x00000000
+
+#define CFG_IBAT6U 0x00000000
+#define CFG_IBAT6L 0x00000000
+
+#define CFG_IBAT7U 0x00000000
+#define CFG_IBAT7L 0x00000000
+
+#define CFG_DBAT0U 0xE0003FFF
+#define CFG_DBAT0L 0xE000002A
+
+#define CFG_DBAT1U 0x00007FFF
+#define CFG_DBAT1L 0x00000012
+
+#define CFG_DBAT2U 0x00000000
+#define CFG_DBAT2L 0x00000000
+
+#define CFG_DBAT3U 0xC0000003
+#define CFG_DBAT3L 0xC000002A
+
+#define CFG_DBAT4U 0x00000000
+#define CFG_DBAT4L 0x00000000
+
+#define CFG_DBAT5U 0x00000000
+#define CFG_DBAT5L 0x00000000
+
+#define CFG_DBAT6U 0x00000000
+#define CFG_DBAT6L 0x00000000
+
+#define CFG_DBAT7U 0x00000000
+#define CFG_DBAT7L 0x00000000
+
+/* I2C addresses for the two DIMM SPD chips */
+#define DIMM0_I2C_ADDR 0x51
+#define DIMM1_I2C_ADDR 0x52
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1/* Flash can be at one of two addresses */
+#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_SWAP
+
+#define PHYS_FLASH_SIZE 0x01000000
+#define CFG_MAX_FLASH_SECT (128)
+
+#define CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_ADDR 0xFC000000
+
+#define CFG_ENV_OFFSET 0x00000000 /* Offset of Environment Sector */
+#define CFG_ENV_SIZE 0x00000400 /* Total Size of Environment Space */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * L2CR setup -- make sure this is right for your board!
+ * look in include/mpc74xx.h for the defines used here
+ */
+#undef CFG_L2
+
+#define L2_INIT 0
+#define L2_ENABLE (L2_INIT | L2CR_L2E)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CFG_SERIAL_HANG_IN_EXCEPTION
+#endif /* __CONFIG_H */
diff --git a/include/tsi108.h b/include/tsi108.h
new file mode 100644
index 0000000..ba62e7a
--- /dev/null
+++ b/include/tsi108.h
@@ -0,0 +1,221 @@
+/*****************************************************************************
+ * (C) Copyright 2003; Tundra Semiconductor Corp.
+ * (C) Copyright 2006; Freescale Semiconductor Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *****************************************************************************/
+
+/*
+ * FILENAME: tsi108.h
+ *
+ * Originator: Alex Bounine
+ *
+ * DESCRIPTION:
+ * Common definitions for the Tundra Tsi108 bridge chip
+ *
+ */
+
+#ifndef _TSI108_H_
+#define _TSI108_H_
+
+#define TSI108_HLP_REG_OFFSET (0x0000)
+#define TSI108_PCI_REG_OFFSET (0x1000)
+#define TSI108_CLK_REG_OFFSET (0x2000)
+#define TSI108_PB_REG_OFFSET (0x3000)
+#define TSI108_SD_REG_OFFSET (0x4000)
+#define TSI108_MPIC_REG_OFFSET (0x7400)
+
+#define PB_ID (0x000)
+#define PB_RSR (0x004)
+#define PB_BUS_MS_SELECT (0x008)
+#define PB_ISR (0x00C)
+#define PB_ARB_CTRL (0x018)
+#define PB_PVT_CTRL2 (0x034)
+#define PB_SCR (0x400)
+#define PB_ERRCS (0x404)
+#define PB_AERR (0x408)
+#define PB_REG_BAR (0x410)
+#define PB_OCN_BAR1 (0x414)
+#define PB_OCN_BAR2 (0x418)
+#define PB_SDRAM_BAR1 (0x41C)
+#define PB_SDRAM_BAR2 (0x420)
+#define PB_MCR (0xC00)
+#define PB_MCMD (0xC04)
+
+#define HLP_B0_ADDR (0x000)
+#define HLP_B1_ADDR (0x010)
+#define HLP_B2_ADDR (0x020)
+#define HLP_B3_ADDR (0x030)
+
+#define HLP_B0_MASK (0x004)
+#define HLP_B1_MASK (0x014)
+#define HLP_B2_MASK (0x024)
+#define HLP_B3_MASK (0x034)
+
+#define HLP_B0_CTRL0 (0x008)
+#define HLP_B1_CTRL0 (0x018)
+#define HLP_B2_CTRL0 (0x028)
+#define HLP_B3_CTRL0 (0x038)
+
+#define HLP_B0_CTRL1 (0x00C)
+#define HLP_B1_CTRL1 (0x01C)
+#define HLP_B2_CTRL1 (0x02C)
+#define HLP_B3_CTRL1 (0x03C)
+
+#define PCI_CSR (0x004)
+#define PCI_P2O_BAR0 (0x010)
+#define PCI_P2O_BAR0_UPPER (0x014)
+#define PCI_P2O_BAR2 (0x018)
+#define PCI_P2O_BAR2_UPPER (0x01C)
+#define PCI_P2O_BAR3 (0x020)
+#define PCI_P2O_BAR3_UPPER (0x024)
+
+#define PCI_MISC_CSR (0x040)
+#define PCI_P2O_PAGE_SIZES (0x04C)
+
+#define PCI_PCIX_STAT (0x0F4)
+
+#define PCI_IRP_STAT (0x184)
+
+#define PCI_PFAB_BAR0 (0x204)
+#define PCI_PFAB_BAR0_UPPER (0x208)
+#define PCI_PFAB_IO (0x20C)
+#define PCI_PFAB_IO_UPPER (0x210)
+
+#define PCI_PFAB_MEM32 (0x214)
+#define PCI_PFAB_MEM32_REMAP (0x218)
+#define PCI_PFAB_MEM32_MASK (0x21C)
+
+#define CG_PLL0_CTRL0 (0x210)
+#define CG_PLL0_CTRL1 (0x214)
+#define CG_PLL1_CTRL0 (0x220)
+#define CG_PLL1_CTRL1 (0x224)
+#define CG_PWRUP_STATUS (0x234)
+
+#define MPIC_CSR(n) (0x30C + (n * 0x40))
+
+#define SD_CTRL (0x000)
+#define SD_STATUS (0x004)
+#define SD_TIMING (0x008)
+#define SD_REFRESH (0x00C)
+#define SD_INT_STATUS (0x010)
+#define SD_INT_ENABLE (0x014)
+#define SD_INT_SET (0x018)
+#define SD_D0_CTRL (0x020)
+#define SD_D1_CTRL (0x024)
+#define SD_D0_BAR (0x028)
+#define SD_D1_BAR (0x02C)
+#define SD_ECC_CTRL (0x040)
+#define SD_DLL_STATUS (0x250)
+
+#define TS_SD_CTRL_ENABLE (1 << 31)
+
+#define PB_ERRCS_ES (1 << 1)
+#define PB_ISR_PBS_RD_ERR (1 << 8)
+#define PCI_IRP_STAT_P_CSR (1 << 23)
+
+/*
+ * I2C : Register address offset definitions
+ */
+#define I2C_CNTRL1 (0x00000000)
+#define I2C_CNTRL2 (0x00000004)
+#define I2C_RD_DATA (0x00000008)
+#define I2C_TX_DATA (0x0000000c)
+
+/*
+ * I2C : Register Bit Masks and Reset Values
+ * definitions for every register
+ */
+
+/* I2C_CNTRL1 : Reset Value */
+#define I2C_CNTRL1_RESET_VALUE (0x0000000a)
+
+/* I2C_CNTRL1 : Register Bits Masks Definitions */
+#define I2C_CNTRL1_DEVCODE (0x0000000f)
+#define I2C_CNTRL1_PAGE (0x00000700)
+#define I2C_CNTRL1_BYTADDR (0x00ff0000)
+#define I2C_CNTRL1_I2CWRITE (0x01000000)
+
+/* I2C_CNTRL1 : Read/Write Bit Mask Definition */
+#define I2C_CNTRL1_RWMASK (0x01ff070f)
+
+/* I2C_CNTRL1 : Unused/Reserved bits Definition */
+#define I2C_CNTRL1_RESERVED (0xfe00f8f0)
+
+/* I2C_CNTRL2 : Reset Value */
+#define I2C_CNTRL2_RESET_VALUE (0x00000000)
+
+/* I2C_CNTRL2 : Register Bits Masks Definitions */
+#define I2C_CNTRL2_SIZE (0x00000003)
+#define I2C_CNTRL2_LANE (0x0000000c)
+#define I2C_CNTRL2_MULTIBYTE (0x00000010)
+#define I2C_CNTRL2_START (0x00000100)
+#define I2C_CNTRL2_WR_STATUS (0x00010000)
+#define I2C_CNTRL2_RD_STATUS (0x00020000)
+#define I2C_CNTRL2_I2C_TO_ERR (0x04000000)
+#define I2C_CNTRL2_I2C_CFGERR (0x08000000)
+#define I2C_CNTRL2_I2C_CMPLT (0x10000000)
+
+/* I2C_CNTRL2 : Read/Write Bit Mask Definition */
+#define I2C_CNTRL2_RWMASK (0x0000011f)
+
+/* I2C_CNTRL2 : Unused/Reserved bits Definition */
+#define I2C_CNTRL2_RESERVED (0xe3fcfee0)
+
+/* I2C_RD_DATA : Reset Value */
+#define I2C_RD_DATA_RESET_VALUE (0x00000000)
+
+/* I2C_RD_DATA : Register Bits Masks Definitions */
+#define I2C_RD_DATA_RBYTE0 (0x000000ff)
+#define I2C_RD_DATA_RBYTE1 (0x0000ff00)
+#define I2C_RD_DATA_RBYTE2 (0x00ff0000)
+#define I2C_RD_DATA_RBYTE3 (0xff000000)
+
+/* I2C_RD_DATA : Read/Write Bit Mask Definition */
+#define I2C_RD_DATA_RWMASK (0x00000000)
+
+/* I2C_RD_DATA : Unused/Reserved bits Definition */
+#define I2C_RD_DATA_RESERVED (0x00000000)
+
+/* I2C_TX_DATA : Reset Value */
+#define I2C_TX_DATA_RESET_VALUE (0x00000000)
+
+/* I2C_TX_DATA : Register Bits Masks Definitions */
+#define I2C_TX_DATA_TBYTE0 (0x000000ff)
+#define I2C_TX_DATA_TBYTE1 (0x0000ff00)
+#define I2C_TX_DATA_TBYTE2 (0x00ff0000)
+#define I2C_TX_DATA_TBYTE3 (0xff000000)
+
+/* I2C_TX_DATA : Read/Write Bit Mask Definition */
+#define I2C_TX_DATA_RWMASK (0xffffffff)
+
+/* I2C_TX_DATA : Unused/Reserved bits Definition */
+#define I2C_TX_DATA_RESERVED (0x00000000)
+
+#define TSI108_I2C_OFFSET 0x7000 /* offset for general use I2C channel */
+#define TSI108_I2C_SDRAM_OFFSET 0x4400 /* offset for SPD I2C channel */
+
+#define I2C_EEPROM_DEVCODE 0xA /* standard I2C EEPROM device code */
+
+/* I2C status codes */
+
+#define TSI108_I2C_SUCCESS 0
+#define TSI108_I2C_PARAM_ERR 1
+#define TSI108_I2C_TIMEOUT_ERR 2
+#define TSI108_I2C_IF_BUSY 3
+#define TSI108_I2C_IF_ERROR 4
+
+#endif /* _TSI108_H_ */
diff --git a/lib_ppc/extable.c b/lib_ppc/extable.c
index d92f142..fe856ff 100644
--- a/lib_ppc/extable.c
+++ b/lib_ppc/extable.c
@@ -37,6 +37,8 @@
* on our cache or tlb entries.
*/
+DECLARE_GLOBAL_DATA_PTR;
+
struct exception_table_entry
{
unsigned long insn, fixup;
@@ -55,10 +57,22 @@ search_one_table(const struct exception_table_entry *first,
long diff;
mid = (last - first) / 2 + first;
- diff = mid->insn - value;
- if (diff == 0)
- return mid->fixup;
- else if (diff < 0)
+ if (mid > CFG_MONITOR_BASE) {
+ /* exception occurs in FLASH, before u-boot relocation.
+ * No relocation offset is needed.
+ */
+ diff = mid->insn - value;
+ if (diff == 0)
+ return mid->fixup;
+ } else {
+ /* exception occurs in RAM, after u-boot relocation.
+ * A relocation offset should be added.
+ */
+ diff = (mid->insn + gd->reloc_off) - value;
+ if (diff == 0)
+ return (mid->fixup + gd->reloc_off);
+ }
+ if (diff < 0)
first = mid+1;
else
last = mid-1;
@@ -75,8 +89,11 @@ search_exception_table(unsigned long addr)
/* There is only the kernel to search. */
ret = search_one_table(__start___ex_table, __stop___ex_table-1, addr);
+ /* if the serial port does not hang in exception, printf can be used */
+#if !defined(CFG_SERIAL_HANG_IN_EXCEPTION)
if (ex_tab_message)
printf("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret);
+#endif
if (ret) return ret;
return 0;
diff --git a/net/eth.c b/net/eth.c
index cca9392..44390d2 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -52,6 +52,7 @@ extern int rtl8139_initialize(bd_t*);
extern int rtl8169_initialize(bd_t*);
extern int scc_initialize(bd_t*);
extern int skge_initialize(bd_t*);
+extern int tsi108_eth_initialize(bd_t*);
extern int tsec_initialize(bd_t*, int, char *);
extern int npe_initialize(bd_t *);
extern int uec_initialize(int);
@@ -249,6 +250,9 @@ int eth_initialize(bd_t *bis)
#ifdef CONFIG_NS8382X
ns8382x_initialize(bis);
#endif
+#if defined(CONFIG_TSI108_ETH)
+ tsi108_eth_initialize(bis);
+#endif
#if defined(CONFIG_RTL8139)
rtl8139_initialize(bis);
#endif
generated by cgit v1.1 at 2024-12-21 15:08:33 +0000