diff options
| -rw-r--r-- | board/bf518f-ezbrd/bf518f-ezbrd.c | 55 |
1 files changed, 51 insertions, 4 deletions
diff --git a/board/bf518f-ezbrd/bf518f-ezbrd.c b/board/bf518f-ezbrd/bf518f-ezbrd.c index 2c7961a..1761b8e 100644 --- a/board/bf518f-ezbrd/bf518f-ezbrd.c +++ b/board/bf518f-ezbrd/bf518f-ezbrd.c @@ -62,18 +62,65 @@ static void board_init_enetaddr(uchar *mac_addr) eth_setenv_enetaddr("ethaddr", mac_addr); } +#define KSZ_MAX_HZ 5000000 + +#define KSZ_WRITE 0x02 +#define KSZ_READ 0x03 + +#define KSZ_REG_STPID 0x01 /* Register 1: Chip ID1 / Start Switch */ +#define KSZ_REG_GC9 0x0b /* Register 11: Global Control 9 */ +#define KSZ_REG_P3C0 0x30 /* Register 48: Port 3 Control 0 */ + +static int ksz8893m_transfer(struct spi_slave *slave, uchar dir, uchar reg, + uchar data, uchar result[3]) +{ + unsigned char dout[3] = { dir, reg, data, }; + return spi_xfer(slave, sizeof(dout) * 8, dout, result, SPI_XFER_BEGIN | SPI_XFER_END); +} + +static int ksz8893m_reg_set(struct spi_slave *slave, uchar reg, uchar data) +{ + unsigned char din[3]; + return ksz8893m_transfer(slave, KSZ_WRITE, reg, data, din); +} + +static int ksz8893m_reg_clear(struct spi_slave *slave, uchar reg, uchar mask) +{ + int ret = 0; + unsigned char din[3]; + + ret |= ksz8893m_transfer(slave, KSZ_READ, reg, 0, din); + ret |= ksz8893m_reg_set(slave, reg, din[2] & mask); + + return ret; +} + +static int ksz8893m_reset(struct spi_slave *slave) +{ + int ret = 0; + + /* Disable STPID mode */ + ret |= ksz8893m_reg_clear(slave, KSZ_REG_GC9, 0x01); + + /* Disable VLAN tag insert on Port3 */ + ret |= ksz8893m_reg_clear(slave, KSZ_REG_P3C0, 0x04); + + /* Start switch */ + ret |= ksz8893m_reg_set(slave, KSZ_REG_STPID, 0x01); + + return ret; +} + int board_eth_init(bd_t *bis) { static bool switch_is_alive = false; int ret; if (!switch_is_alive) { - struct spi_slave *slave = spi_setup_slave(0, 1, 5000000, SPI_MODE_3); + struct spi_slave *slave = spi_setup_slave(0, 1, KSZ_MAX_HZ, SPI_MODE_3); if (slave) { if (!spi_claim_bus(slave)) { - unsigned char dout[3] = { 2, 1, 1, }; - unsigned char din[3]; - ret = spi_xfer(slave, sizeof(dout) * 8, dout, din, SPI_XFER_BEGIN | SPI_XFER_END); + ret = ksz8893m_reset(slave); if (!ret) switch_is_alive = true; spi_release_bus(slave); |