diff options
-rw-r--r-- | board/atc/flash.c | 182 | ||||
-rw-r--r-- | include/configs/atc.h | 4 |
2 files changed, 92 insertions, 94 deletions
diff --git a/board/atc/flash.c b/board/atc/flash.c index 4bcf2ee..7e97182 100644 --- a/board/atc/flash.c +++ b/board/atc/flash.c @@ -292,9 +292,8 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info) /* The manufacturer codes are only 1 byte, so just use 1 byte. * This works for any bus width and any FLASH device width. */ - udelay(1000000);//psl - //psl switch (addr[1] & 0xff) { - switch (addr[0] & 0xff) {//psl + udelay(100); + switch (addr[0] & 0xff) { case (uchar)AMD_MANUFACT: info->flash_id = FLASH_MAN_AMD; @@ -312,7 +311,6 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info) } /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */ - //psl if (info->flash_id != FLASH_UNKNOWN) switch (addr[0]) { if (info->flash_id != FLASH_UNKNOWN) switch (addr[1]) { case (FPW)AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */ @@ -519,46 +517,46 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) */ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) { - FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */ - int bytes; /* number of bytes to program in current word */ - int left; /* number of bytes left to program */ - int i, res; + FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */ + int bytes; /* number of bytes to program in current word */ + int left; /* number of bytes left to program */ + int i, res; - for (left = cnt, res = 0; - left > 0 && res == 0; - addr += sizeof(data), left -= sizeof(data) - bytes) { + for (left = cnt, res = 0; + left > 0 && res == 0; + addr += sizeof(data), left -= sizeof(data) - bytes) { - bytes = addr & (sizeof(data) - 1); - addr &= ~(sizeof(data) - 1); + bytes = addr & (sizeof(data) - 1); + addr &= ~(sizeof(data) - 1); - /* combine source and destination data so can program - * an entire word of 16 or 32 bits - */ - for (i = 0; i < sizeof(data); i++) { - data <<= 8; - if (i < bytes || i - bytes >= left ) - data += *((uchar *)addr + i); - else - data += *src++; - } + /* combine source and destination data so can program + * an entire word of 16 or 32 bits + */ + for (i = 0; i < sizeof(data); i++) { + data <<= 8; + if (i < bytes || i - bytes >= left ) + data += *((uchar *)addr + i); + else + data += *src++; + } - /* write one word to the flash */ - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - res = write_word_amd(info, (FPWV *)addr, data); - break; - case FLASH_MAN_INTEL: - res = write_word_intel(info, (FPWV *)addr, data); - break; - default: - /* unknown flash type, error! */ - printf ("missing or unknown FLASH type\n"); - res = 1; /* not really a timeout, but gives error */ - break; + /* write one word to the flash */ + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_AMD: + res = write_word_amd(info, (FPWV *)addr, data); + break; + case FLASH_MAN_INTEL: + res = write_word_intel(info, (FPWV *)addr, data); + break; + default: + /* unknown flash type, error! */ + printf ("missing or unknown FLASH type\n"); + res = 1; /* not really a timeout, but gives error */ + break; + } } - } - return (res); + return (res); } /*----------------------------------------------------------------------- @@ -573,43 +571,43 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) */ static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data) { - ulong start; - int flag; - int res = 0; /* result, assume success */ - FPWV *base; /* first address in flash bank */ - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } + ulong start; + int flag; + int res = 0; /* result, assume success */ + FPWV *base; /* first address in flash bank */ + + /* Check if Flash is (sufficiently) erased */ + if ((*dest & data) != data) { + return (2); + } - base = (FPWV *)(info->start[0]); + base = (FPWV *)(info->start[0]); - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); - base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */ + base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */ + base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */ - *dest = data; /* start programming the data */ + *dest = data; /* start programming the data */ - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); - start = get_timer (0); + start = get_timer (0); - /* data polling for D7 */ - while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - *dest = (FPW)0x00F000F0; /* reset bank */ - res = 1; + /* data polling for D7 */ + while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *dest = (FPW)0x00F000F0; /* reset bank */ + res = 1; + } } - } - return (res); + return (res); } /*----------------------------------------------------------------------- @@ -624,42 +622,42 @@ static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data) */ static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data) { - ulong start; - int flag; - int res = 0; /* result, assume success */ + ulong start; + int flag; + int res = 0; /* result, assume success */ - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } + /* Check if Flash is (sufficiently) erased */ + if ((*dest & data) != data) { + return (2); + } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); - *dest = (FPW)0x00500050; /* clear status register */ - *dest = (FPW)0x00FF00FF; /* make sure in read mode */ - *dest = (FPW)0x00400040; /* program setup */ + *dest = (FPW)0x00500050; /* clear status register */ + *dest = (FPW)0x00FF00FF; /* make sure in read mode */ + *dest = (FPW)0x00400040; /* program setup */ - *dest = data; /* start programming the data */ + *dest = data; /* start programming the data */ - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); - start = get_timer (0); + start = get_timer (0); - while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - *dest = (FPW)0x00B000B0; /* Suspend program */ - res = 1; + while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *dest = (FPW)0x00B000B0; /* Suspend program */ + res = 1; + } } - } - if (res == 0 && (*dest & (FPW)0x00100010)) - res = 1; /* write failed, time out error is close enough */ + if (res == 0 && (*dest & (FPW)0x00100010)) + res = 1; /* write failed, time out error is close enough */ - *dest = (FPW)0x00500050; /* clear status register */ - *dest = (FPW)0x00FF00FF; /* make sure in read mode */ + *dest = (FPW)0x00500050; /* clear status register */ + *dest = (FPW)0x00FF00FF; /* make sure in read mode */ - return (res); + return (res); } diff --git a/include/configs/atc.h b/include/configs/atc.h index ca6b740..aad243d 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -232,7 +232,7 @@ #define CFG_SDRAM_BASE 0x00000000 #define CFG_SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */ #define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/ #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) @@ -242,7 +242,7 @@ #if 1 /* environment is in Flash */ #define CFG_ENV_IS_IN_FLASH 1 -# define CFG_ENV_ADDR (CFG_FLASH_BASE+0x40000) +# define CFG_ENV_ADDR (CFG_FLASH_BASE+0x30000) # define CFG_ENV_SIZE 0x10000 # define CFG_ENV_SECT_SIZE 0x10000 #else |