29 files changed, 1231 insertions, 58 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 98b3324..727a7b6 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,7 +1,37 @@
 ======================================================================
-Changes since U-Boot 1.1.4:
+Changes for U-Boot 1.1.5:
 ======================================================================
 
+* Cleanup compile warnings. Prepare for release 1.1.5
+
+* Fix compile problem in include/configs/ep82xxm.h
+  (must have never been tested before!)
+
+* MCC200: Fix uninitialized variable problem in LCD driver
+
+* Add board/cpu specific NAND chip select function to 440 NDFC
+  Based on idea and implementation from Jeff Mann
+  Patch by Stefan Roese, 20 Oct 2006
+
+* Make 4xx bootup message shorter on 440EPx/GRx platforms
+  Patch by Stefan Roese, 18 Oct 2006
+
+* Add (preliminary) support for V38B board
+
+* PPC405EP: Add support for board configuration of CPC0_PCI register
+  This is needed to be able to configure PerWE*/PCI_INT* pin as PerWE*
+  Patch by Tolunay Orkun, 07 Apr 2006
+
+* PPC405EP: Add CFG_GPIO0_OR, CFG_GPIO0_ODR to setup GPIO completely.
+  - Add configuration of Open Drain GPIO Output selection
+  - Add configuration of initial value of GPIO output pins
+  Patch by Tolunay Orkun, 07 Apr 2006
+
+* Fix spelling; minor code cleanup.
+
+* Fix JFFS2 compilation problem
+  Patch by Stefan Roese, 12 Oct 2006
+
 * Cleanup of NAND update patch (remove changelog from cmd_nand.c)
   Patch by Guido Classen, 10 Oct 2006
 
diff --git a/MAKEALL b/MAKEALL
index e9c04a6..4409f2b 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -39,7 +39,7 @@ LIST_5xxx="	\
 	icecube_5100	icecube_5200	lite5200b	mcc200		\
 	o2dnt		pf5200		PM520		TB5200		\
 	Total5100	Total5200	Total5200_Rev2	TQM5200		\
-	TQM5200_B	TQM5200S					\
+	TQM5200_B	TQM5200S	v38b				\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 8ef0097..9203494 100644
--- a/Makefile
+++ b/Makefile
@@ -23,7 +23,7 @@
 
 VERSION = 1
 PATCHLEVEL = 1
-SUBLEVEL = 4
+SUBLEVEL = 5
 EXTRAVERSION =
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 VERSION_FILE = $(obj)include/version_autogenerated.h
@@ -400,6 +400,9 @@ icecube_5100_config:			unconfig
 		}
 	@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
 
+v38b_config: unconfig
+	@./mkconfig -a V38B ppc mpc5xxx v38b
+
 inka4x0_config:	unconfig
 	@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 
diff --git a/board/ep82xxm/ep82xxm.c b/board/ep82xxm/ep82xxm.c
index 35e644d..fe3f78e 100644
--- a/board/ep82xxm/ep82xxm.c
+++ b/board/ep82xxm/ep82xxm.c
@@ -227,8 +227,6 @@ long int initdram(int board_type)
 #ifndef CFG_RAMBOOT
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
-	vu_char *ramaddr = (vu_char *)CFG_SDRAM_BASE;
-	uchar c = 0xFF;
 	uint psdmr = CFG_PSDMR;
 	int i;
 
diff --git a/board/v38b/Makefile b/board/v38b/Makefile
new file mode 100644
index 0000000..304deaa
--- /dev/null
+++ b/board/v38b/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o ethaddr.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/v38b/config.mk b/board/v38b/config.mk
new file mode 100644
index 0000000..75577fc
--- /dev/null
+++ b/board/v38b/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MarelV38B board
+#
+
+sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+
+TEXT_BASE = 0xFF000000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/v38b/ethaddr.c b/board/v38b/ethaddr.c
new file mode 100644
index 0000000..aaa629e
--- /dev/null
+++ b/board/v38b/ethaddr.c
@@ -0,0 +1,254 @@
+/*
+ *
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+
+#define GPIO_ENABLE	(MPC5XXX_WU_GPIO)
+
+/* Open Drain Emulation Register */
+#define GPIO_ODR	(MPC5XXX_WU_GPIO + 0x04)
+
+/* Data Direction Register */
+#define GPIO_DDR	(MPC5XXX_WU_GPIO + 0x08)
+
+/* Data Value Out Register */
+#define GPIO_DVOR	(MPC5XXX_WU_GPIO + 0x0C)
+
+/* Interrupt Enable Register */
+#define GPIO_IER	(MPC5XXX_WU_GPIO + 0x10)
+
+/* Individual Interrupt Enable Register */
+#define GPIO_IIER	(MPC5XXX_WU_GPIO + 0x14)
+
+/* Interrupt Type Register */
+#define GPIO_ITR	(MPC5XXX_WU_GPIO + 0x18)
+
+/* Master Enable Register */
+#define GPIO_MER	(MPC5XXX_WU_GPIO + 0x1C)
+
+/* Data Input Value Register */
+#define GPIO_DIVR	(MPC5XXX_WU_GPIO + 0x20)
+
+/* Status Register */
+#define GPIO_SR		(MPC5XXX_WU_GPIO + 0x24)
+
+#define PSC6_0		0x10000000
+#define WKUP_7		0x80000000
+
+/* For NS4 A/B board define WKUP_7, for V38B board PSC_6 */
+#define GPIO_PIN	PSC6_0
+
+#define NO_ERROR	0
+#define ERR_NO_NUMBER	1
+#define ERR_BAD_NUMBER	2
+
+typedef volatile unsigned long GPIO_REG;
+typedef GPIO_REG *GPIO_REG_PTR;
+
+static int is_high(void);
+static int check_device(void);
+static void io_out(int value);
+static void io_input(void);
+static void io_output(void);
+static void init_gpio(void);
+static void read_byte(unsigned char *data);
+static void write_byte(unsigned char command);
+
+void read_2501_memory(unsigned char *psernum, unsigned char *perr);
+void board_get_enetaddr(uchar *enetaddr);
+
+static int is_high()
+{
+	return (* ((vu_long *) GPIO_DIVR) & GPIO_PIN);
+}
+
+static void io_out(int value)
+{
+	if (value)
+		*((vu_long *) GPIO_DVOR) |= GPIO_PIN;
+	else
+		*((vu_long *) GPIO_DVOR) &= ~GPIO_PIN;
+}
+
+static void io_input()
+{
+	*((vu_long *) GPIO_DDR) &= ~GPIO_PIN;
+	udelay(3);	/* allow input to settle */
+}
+
+static void io_output()
+{
+	*((vu_long *) GPIO_DDR) |= GPIO_PIN;
+}
+
+static void init_gpio()
+{
+	*((vu_long *) GPIO_ENABLE) |= GPIO_PIN;	/* Enable appropriate pin */
+}
+
+void read_2501_memory(unsigned char *psernum, unsigned char *perr)
+{
+#define NBYTES 28
+	unsigned char crcval, i;
+	unsigned char buf[NBYTES];
+
+	*perr = 0;
+	crcval = 0;
+
+	for (i=0; i<NBYTES; i++)
+
+
+	if (!check_device())
+		*perr = ERR_NO_NUMBER;
+	else {
+		*perr = NO_ERROR;
+		write_byte(0xCC);		/* skip ROM (0xCC) */
+		write_byte(0xF0);		/* Read memory command 0xF0 */
+		write_byte(0x00);		/* Address TA1=0, TA2=0 */
+		write_byte(0x00);
+		read_byte(&crcval);		/* Read CRC of address and command */
+
+		for (i=0; i<NBYTES; i++)
+			read_byte( &buf[i] );
+	}
+	if (strncmp((const char*) &buf[11], "MAREL IEEE 802.3", 16)) {
+		*perr = ERR_BAD_NUMBER;
+		psernum[0] = 0x00;
+		psernum[1] = 0xE0;
+		psernum[2] = 0xEE;
+		psernum[3] = 0xFF;
+		psernum[4] = 0xFF;
+		psernum[5] = 0xFF;
+	}
+	else {
+		psernum[0] = 0x00;
+		psernum[1] = 0xE0;
+		psernum[2] = 0xEE;
+		psernum[3] = buf[7];
+		psernum[4] = buf[6];
+		psernum[5] = buf[5];
+	}
+}
+
+static int check_device()
+{
+	int found;
+
+	io_output();
+	io_out(0);
+	udelay(500);  /* must be at least 480 us low pulse */
+
+	io_input();
+	udelay(60);
+
+	found = (is_high() == 0) ? 1 : 0;
+	udelay(500);  /* must be at least 480 us low pulse */
+
+	return found;
+}
+
+static void write_byte(unsigned char command)
+{
+	char i;
+
+	for (i=0; i<8; i++) {
+		/* 1 us to 15 us low pulse starts bit slot */
+		/* Start with high pulse for 3 us */
+		io_input();
+
+		udelay(3);
+
+		io_out(0);
+		io_output();
+
+		udelay(3);
+
+		if (command & 0x01) {
+			/* 60 us high for 1-bit */
+			io_input();
+			udelay(60);
+		}
+		else {
+			/* 60 us low for 0-bit */
+			udelay(60);
+		}
+		/*  Leave pin as input */
+		io_input();
+
+		command = command >> 1;
+	}
+}
+
+static void read_byte(unsigned char  *data)
+{
+	unsigned char i, rdat = 0;
+
+	for (i=0; i<8; i++) {
+		/* read one bit from one-wire device */
+
+		/* 1 - 15 us low starts bit slot */
+		io_out(0);
+		io_output();
+		udelay(0);
+
+		/* allow line to be pulled high */
+		io_input();
+
+		/* delay 10 us */
+		udelay(10);
+
+		/* now sample input status */
+		if (is_high())
+			rdat = (rdat >> 1) | 0x80;
+		else
+			rdat = rdat >> 1;
+
+		udelay(60);	/* at least 60 us */
+	}
+	/* copy the return value */
+	*data = rdat;
+}
+
+void board_get_enetaddr(uchar *enetaddr)
+{
+	unsigned char sn[6], err=NO_ERROR;
+
+	init_gpio();
+
+	read_2501_memory(sn, &err);
+
+	if (err == NO_ERROR) {
+		sprintf(enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
+				sn[0], sn[1], sn[2], sn[3], sn[4], sn[5]);
+		printf("MAC address: %s\n", enetaddr);
+		setenv("ethaddr", enetaddr);
+	}
+	else {
+		sprintf(enetaddr, "00:01:02:03:04:05");
+		printf("Error reading MAC address.\n");
+		printf("Setting default to %s\n", enetaddr);
+		setenv("ethaddr", enetaddr);
+	}
+}
diff --git a/board/v38b/u-boot.lds b/board/v38b/u-boot.lds
new file mode 100644
index 0000000..6ec5256
--- /dev/null
+++ b/board/v38b/u-boot.lds
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2003-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc5xxx/start.o	(.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c
new file mode 100644
index 0000000..99fe7db
--- /dev/null
+++ b/board/v38b/v38b.c
@@ -0,0 +1,252 @@
+/*
+ * (C) Copyright 2003-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <asm/processor.h>
+
+#ifndef CFG_RAMBOOT
+static void sdram_start(int hi_addr)
+{
+	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+	/* unlock mode register */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+	/* precharge all banks */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+#if SDRAM_DDR
+	/* set mode register: extended mode */
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
+	__asm__ volatile ("sync");
+
+	/* set mode register: reset DLL */
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
+	__asm__ volatile ("sync");
+#endif /* SDRAM_DDR */
+
+	/* precharge all banks */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+	/* auto refresh */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+	/* set mode register */
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+	__asm__ volatile ("sync");
+
+	/* normal operation */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+	__asm__ volatile ("sync");
+}
+#endif /* !CFG_RAMBOOT */
+
+
+long int initdram(int board_type)
+{
+	ulong dramsize = 0;
+	ulong dramsize2 = 0;
+	uint svr, pvr;
+
+#ifndef CFG_RAMBOOT
+	ulong test1, test2;
+
+	/* setup SDRAM chip selects */
+	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;	/* 2G at 0x0 */
+	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
+	__asm__ volatile ("sync");
+
+	/* setup config registers */
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+	__asm__ volatile ("sync");
+
+#if SDRAM_DDR
+	/* set tap delay */
+	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
+	__asm__ volatile ("sync");
+#endif /* SDRAM_DDR */
+
+	/* find RAM size using SDRAM CS0 only */
+	sdram_start(0);
+	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	sdram_start(1);
+	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	if (test1 > test2) {
+		sdram_start(0);
+		dramsize = test1;
+	} else
+		dramsize = test2;
+
+	/* memory smaller than 1MB is impossible */
+	if (dramsize < (1 << 20))
+		dramsize = 0;
+
+	/* set SDRAM CS0 size according to the amount of RAM found */
+	if (dramsize > 0)
+		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
+	else
+		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+
+	/* let SDRAM CS1 start right after CS0 */
+	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
+
+	/* find RAM size using SDRAM CS1 only */
+	if (!dramsize)
+		sdram_start(0);
+	test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	if (!dramsize) {
+		sdram_start(1);
+		test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	}
+	if (test1 > test2) {
+		sdram_start(0);
+		dramsize2 = test1;
+	} else
+		dramsize2 = test2;
+
+	/* memory smaller than 1MB is impossible */
+	if (dramsize2 < (1 << 20))
+		dramsize2 = 0;
+
+	/* set SDRAM CS1 size according to the amount of RAM found */
+	if (dramsize2 > 0)
+		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
+			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
+	else
+		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+
+#else /* CFG_RAMBOOT */
+
+	/* retrieve size of memory connected to SDRAM CS0 */
+	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+	if (dramsize >= 0x13)
+		dramsize = (1 << (dramsize - 0x13)) << 20;
+	else
+		dramsize = 0;
+
+	/* retrieve size of memory connected to SDRAM CS1 */
+	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
+	if (dramsize2 >= 0x13)
+		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
+	else
+		dramsize2 = 0;
+
+#endif /* CFG_RAMBOOT */
+
+	/*
+	 * On MPC5200B we need to set the special configuration delay in the
+	 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
+	 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
+	 *
+	 * "The SDelay should be written to a value of 0x00000004. It is
+	 * required to account for changes caused by normal wafer processing
+	 * parameters."
+	 */
+	svr = get_svr();
+	pvr = get_pvr();
+	if ((SVR_MJREV(svr) >= 2) &&
+		(PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
+
+		*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+		__asm__ volatile ("sync");
+	}
+
+	return dramsize + dramsize2;
+}
+
+
+int checkboard (void)
+{
+	puts("Board: MarelV38B\n");
+	return 0;
+}
+
+
+int board_early_init_r(void)
+{
+	/*
+	 * Now, when we are in RAM, enable flash write access for detection process.
+	 * Note that CS_BOOT cannot be cleared when executing in flash.
+	 */
+	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+	return 0;
+}
+
+
+#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+
+#define GPIO_PSC1_4	0x01000000UL
+
+void init_ide_reset(void)
+{
+	debug("init_ide_reset\n");
+
+	/* Configure PSC1_4 as GPIO output for ATA reset */
+	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
+	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
+	/* Deassert reset */
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA   |= GPIO_PSC1_4;
+}
+
+
+void ide_set_reset(int idereset)
+{
+	debug("ide_reset(%d)\n", idereset);
+
+	if (idereset) {
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		/* Make a delay. MPC5200 spec says 25 usec min */
+		udelay(500000);
+	} else
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+}
+#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+
+
+void led_d4_on(void)
+{
+	/* TIMER7 as GPIO output low */
+	*(vu_long *) (MPC5XXX_GPT + 0x70) |= 0x24;
+}
+
+
+void led_d4_off(void)
+{
+	/* TIMER7 as GPIO output high */
+	*(vu_long *) (MPC5XXX_GPT + 0x70) |= 0x34;
+}
+
+
+void hw_watchdog_reset(void)
+{
+/* TODO fill this in */
+}
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index fdbe7c7..4fb3b65 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -178,6 +178,14 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		printf("Device %d: %s", dev, nand_info[dev].name);
 		puts("... is now current device\n");
 		nand_curr_device = dev;
+
+#ifdef CFG_NAND_SELECT_DEVICE
+		/*
+		 * Select the chip in the board/cpu specific driver
+		 */
+		board_nand_select_device(nand_info[dev].priv, dev);
+#endif
+
 		return 0;
 	}
 
@@ -251,7 +259,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			       "Use this command only for testing purposes "
 			       "if you\n"
 			       "	 "
-			       "are shure of what you are doing!\n"
+			       "are sure of what you are doing!\n"
 			       "\nReally scrub this NAND flash? <y/N>\n"
 				);
 
diff --git a/common/lcd.c b/common/lcd.c
index df31ca9..eaed2ab 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -578,7 +578,9 @@ void bitmap_plot (int x, int y)
  */
 int lcd_display_bitmap(ulong bmp_image, int x, int y)
 {
+#if !defined(CONFIG_MCC200)
 	ushort *cmap;
+#endif
 	ushort i, j;
 	uchar *fb;
 	bmp_image_t *bmp=(bmp_image_t *)bmp_image;
@@ -624,13 +626,13 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 	debug ("Display-bmp: %d x %d  with %d colors\n",
 		(int)width, (int)height, (int)colors);
 
+#if !defined(CONFIG_MCC200)
+	/* MCC200 LCD doesn't need CMAP, supports 1bpp b&w only */
 	if (bpix==8) {
 #if defined(CONFIG_PXA250)
 		cmap = (ushort *)fbi->palette;
 #elif defined(CONFIG_MPC823)
 		cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]);
-#elif defined(CONFIG_MCC200)
-		/* MCC200 LCD doesn't need CMAP, supports 1bpp b&w only */
 #else
 # error "Don't know location of color map"
 #endif
@@ -654,6 +656,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 #endif
 		}
 	}
+#endif
 
 	/*
 	 *  BMP format for Monochrome assumes that the state of a
diff --git a/common/miiphybb.c b/common/miiphybb.c
index adb697c..537c15d 100644
--- a/common/miiphybb.c
+++ b/common/miiphybb.c
@@ -41,7 +41,7 @@
 static void miiphy_pre (char read, unsigned char addr, unsigned char reg)
 {
 	int j;			/* counter */
-#ifndef CONFIG_EP8248
+#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
 	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
 #endif
 
@@ -126,7 +126,7 @@ int bb_miiphy_read (char *devname, unsigned char addr,
 {
 	short rdreg;		/* register working value */
 	int j;			/* counter */
-#ifndef CONFIG_EP8248
+#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
 	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
 #endif
 
@@ -193,7 +193,7 @@ int bb_miiphy_write (char *devname, unsigned char addr,
 		unsigned char reg, unsigned short value)
 {
 	int j;			/* counter */
-#ifndef CONFIG_EP8248
+#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
 	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
 #endif
 
diff --git a/common/usb_storage.c b/common/usb_storage.c
index 69ecf18..06ea99b 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -932,8 +932,8 @@ static void usb_bin_fixup(struct usb_device_descriptor descriptor,
 	const unsigned char max_vendor_len = 40;
 	const unsigned char max_product_len = 20;
 	if (descriptor.idVendor == 0x0424 && descriptor.idProduct == 0x223a) {
-		strncpy(vendor, "SMSC", max_vendor_len);
-		strncpy(product, "Flash Media Cntrller", max_product_len);
+		strncpy ((char *)vendor, "SMSC", max_vendor_len);
+		strncpy ((char *)product, "Flash Media Cntrller", max_product_len);
 	}
 }
 #endif /* CONFIG_USB_BIN_FIXUP */
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index 19737ce..37fe3e7 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -882,7 +882,7 @@ int mpc5xxx_fec_initialize(bd_t * bis)
     defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0)	|| \
     defined(CONFIG_MCC200)  || defined(CONFIG_O2DNT)	|| \
     defined(CONFIG_PM520)   || defined(CONFIG_TOP5200)	|| \
-    defined(CONFIG_TQM5200)
+    defined(CONFIG_TQM5200) || defined(CONFIG_V38B)
 # ifndef CONFIG_FEC_10MBIT
 	fec->xcv_type = MII100;
 # else
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 94478db..f4a7208 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -192,6 +192,7 @@ int checkcpu (void)
 	char buf[32];
 
 #if !defined(CONFIG_IOP480)
+	char addstr[64] = "";
 	sys_info_t sys_info;
 
 	puts ("CPU:   ");
@@ -308,19 +309,23 @@ int checkcpu (void)
 #endif /* CONFIG_440 */
 
 	case PVR_440EPX1_RA:
-		puts("EPx Rev. A - Security/Kasumi support");
+		puts("EPx Rev. A");
+		strcpy(addstr, "Security/Kasumi support");
 		break;
 
 	case PVR_440EPX2_RA:
-		puts("EPx Rev. A - No Security/Kasumi support");
+		puts("EPx Rev. A");
+		strcpy(addstr, "No Security/Kasumi support");
 		break;
 
 	case PVR_440GRX1_RA:
-		puts("GRx Rev. A - Security/Kasumi support");
+		puts("GRx Rev. A");
+		strcpy(addstr, "Security/Kasumi support");
 		break;
 
 	case PVR_440GRX2_RA:
-		puts("GRx Rev. A - No Security/Kasumi support");
+		puts("GRx Rev. A");
+		strcpy(addstr, "No Security/Kasumi support");
 		break;
 
 	case PVR_440SP_RA:
@@ -349,13 +354,16 @@ int checkcpu (void)
 	       sys_info.freqPLB / sys_info.pllOpbDiv / 1000000,
 	       FREQ_EBC / 1000000);
 
+	if (addstr[0] != 0)
+		printf("       %s\n", addstr);
+
 #if defined(I2C_BOOTROM)
 	printf ("       I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis");
 #if defined(SDR0_PINSTP_SHIFT)
 	printf ("       Bootstrap Option %c - ", (char)bootstrap_option() + 'A');
 	printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]);
-#endif
-#endif
+#endif	/* SDR0_PINSTP_SHIFT */
+#endif	/* I2C_BOOTROM */
 
 #if defined(CONFIG_PCI)
 	printf ("       Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis");
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index b27567f..def46f1 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -226,13 +226,19 @@ cpu_init_f (void)
 	/*
 	 * GPIO0 setup (select GPIO or alternate function)
 	 */
-	out32(GPIO0_OSRH, CFG_GPIO0_OSRH);   /* output select */
+#if defined(CFG_GPIO0_OR)
+	out32(GPIO0_OR, CFG_GPIO0_OR);		/* set initial state of output pins	*/
+#endif
+#if defined(CFG_GPIO0_ODR)
+	out32(GPIO0_ODR, CFG_GPIO0_ODR);	/* open-drain select			*/
+#endif
+	out32(GPIO0_OSRH, CFG_GPIO0_OSRH);	/* output select			*/
 	out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
-	out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */
+	out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H);	/* input select				*/
 	out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
-	out32(GPIO0_TSRH, CFG_GPIO0_TSRH);   /* three-state select */
+	out32(GPIO0_TSRH, CFG_GPIO0_TSRH);	/* three-state select			*/
 	out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
-	out32(GPIO0_TCR, CFG_GPIO0_TCR);     /* enable output driver for outputs */
+	out32(GPIO0_TCR, CFG_GPIO0_TCR);	/* enable output driver for outputs	*/
 
 	/*
 	 * Set EMAC noise filter bits
diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c
index 183ab5e..2c44111 100644
--- a/cpu/ppc4xx/ndfc.c
+++ b/cpu/ppc4xx/ndfc.c
@@ -66,7 +66,7 @@ static void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd)
 static void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte)
 {
 	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) this->IO_ADDR_W;
+	ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
 
 	if (hwctl & 0x1)
 		out8(base + NDFC_CMD, byte);
@@ -79,7 +79,7 @@ static void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte)
 static u_char ndfc_read_byte(struct mtd_info *mtdinfo)
 {
 	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) this->IO_ADDR_W;
+	ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
 
 	return (in8(base + NDFC_DATA));
 }
@@ -87,7 +87,7 @@ static u_char ndfc_read_byte(struct mtd_info *mtdinfo)
 static int ndfc_dev_ready(struct mtd_info *mtdinfo)
 {
 	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) this->IO_ADDR_W;
+	ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
 
 	while (!(in32(base + NDFC_STAT) & NDFC_STAT_IS_READY))
 		;
@@ -111,30 +111,30 @@ static int ndfc_dev_ready(struct mtd_info *mtdinfo)
 static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
 {
 	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) this->IO_ADDR_W;
+	ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
 	uint32_t *p = (uint32_t *) buf;
 
-	for(;len > 0; len -= 4)
+	for (;len > 0; len -= 4)
 		*p++ = in32(base + NDFC_DATA);
 }
 
 static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
 {
 	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) this->IO_ADDR_W;
+	ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
 	uint32_t *p = (uint32_t *) buf;
 
-	for(; len > 0; len -= 4)
+	for (; len > 0; len -= 4)
 		out32(base + NDFC_DATA, *p++);
 }
 
 static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
 {
 	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) this->IO_ADDR_W;
+	ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
 	uint32_t *p = (uint32_t *) buf;
 
-	for(; len > 0; len -= 4)
+	for (; len > 0; len -= 4)
 		if (*p++ != in32(base + NDFC_DATA))
 			return -1;
 
@@ -142,8 +142,20 @@ static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len
 }
 #endif /* #ifndef CONFIG_NAND_SPL */
 
+void board_nand_select_device(struct nand_chip *nand, int chip)
+{
+	ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc;
+
+	/* Set NandFlash Core Configuration Register */
+	/* 1col x 2 rows */
+	out32(base + NDFC_CCR, 0x00000000 | (chip << 24));
+}
+
 void board_nand_init(struct nand_chip *nand)
 {
+	int chip = (ulong)nand->IO_ADDR_W & 0x00000003;
+	ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc;
+
 	nand->eccmode = NAND_ECC_SOFT;
 
 	nand->hwcontrol  = ndfc_hwcontrol;
@@ -166,10 +178,11 @@ void board_nand_init(struct nand_chip *nand)
 	mtebc(pb0ap, CFG_EBC_PB0AP);
 #endif
 
-	/* Set NandFlash Core Configuration Register */
-	/* Chip select 3, 1col x 2 rows */
-	out32(CFG_NAND_BASE + NDFC_CCR, 0x00000000 | (CFG_NAND_CS << 24));
-	out32(CFG_NAND_BASE + NDFC_BCFG0 + (CFG_NAND_CS << 2), 0x80002222);
+	/*
+	 * Select required NAND chip in NDFC
+	 */
+	board_nand_select_device(nand, chip);
+	out32(base + NDFC_BCFG0 + (chip << 2), 0x80002222);
 }
 
 #endif
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 3f29314..3fe13da 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -1697,7 +1697,8 @@ ppc405ep_init:
 	mtdcr	ebccfgd,r3
 #endif
 
-	addi	r3,0,CPC0_PCI_HOST_CFG_EN
+#ifndef CFG_CPC0_PCI
+	li	r3,CPC0_PCI_HOST_CFG_EN
 #ifdef CONFIG_BUBINGA
 	/*
 	!-----------------------------------------------------------------------
@@ -1712,6 +1713,9 @@ ppc405ep_init:
 	beq	..pci_cfg_set		  /* if not set, then bypass reg write*/
 #endif
 	ori	r3,r3,CPC0_PCI_ARBIT_EN
+#else /* CFG_CPC0_PCI */
+	li	r3,CFG_CPC0_PCI
+#endif /* CFG_CPC0_PCI */
 ..pci_cfg_set:
 	mtdcr	CPC0_PCI, r3		 /* Enable internal arbiter*/
 
diff --git a/doc/README.nand b/doc/README.nand
index 2b9a529..5279a4f 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -1,9 +1,7 @@
 NAND FLASH commands and notes
 
-
 See NOTE below!!!
 
-
 # (C) Copyright 2003
 # Dave Ellis, SIXNET, dge@sixnetio.com
 #
@@ -209,7 +207,6 @@ the tree until the DoC is ported to use the new NAND support (or boards
 with DoC will break).
 
 
-
 Additional improvements to the NAND subsystem by Guido Classen, 10-10-2006
 
 JFFS2 related commands:
diff --git a/drivers/nand/nand.c b/drivers/nand/nand.c
index e1781fc..3899045 100644
--- a/drivers/nand/nand.c
+++ b/drivers/nand/nand.c
@@ -66,8 +66,15 @@ void nand_init(void)
 		size += nand_info[i].size;
 		if (nand_curr_device == -1)
 			nand_curr_device = i;
-}
+	}
 	printf("%lu MiB\n", size / (1024 * 1024));
+
+#ifdef CFG_NAND_SELECT_DEVICE
+	/*
+	 * Select the chip in the board/cpu specific driver
+	 */
+	board_nand_select_device(nand_info[nand_curr_device].priv, nand_curr_device);
+#endif
 }
 
 #endif
diff --git a/drivers/nand/nand_util.c b/drivers/nand/nand_util.c
index 5a8e58a..7570210 100644
--- a/drivers/nand/nand_util.c
+++ b/drivers/nand/nand_util.c
@@ -170,9 +170,9 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 			if (ret > 0) {
 				if (!opts->quiet)
 					printf("\rSkipping bad block at  "
-                                               "0x%08x                   "
-                                               "                         \n",
-                                               erase.addr);
+					       "0x%08x                   "
+					       "                         \n",
+					       erase.addr);
 				continue;
 
 			} else if (ret < 0) {
diff --git a/include/common.h b/include/common.h
index a873fa9..af1251c 100644
--- a/include/common.h
+++ b/include/common.h
@@ -313,7 +313,8 @@ void	board_ether_init (void);
 
 #if defined(CONFIG_RPXCLASSIC)	|| defined(CONFIG_MBX) || \
     defined(CONFIG_IAD210)	|| defined(CONFIG_XPEDITE1K) || \
-    defined(CONFIG_METROBOX)    || defined(CONFIG_KAREF)
+    defined(CONFIG_METROBOX)    || defined(CONFIG_KAREF) || \
+    defined(CONFIG_V38B)
 void	board_get_enetaddr (uchar *addr);
 #endif
 
diff --git a/include/configs/V38B.h b/include/configs/V38B.h
new file mode 100644
index 0000000..8eea504
--- /dev/null
+++ b/include/configs/V38B.h
@@ -0,0 +1,368 @@
+/*
+ * (C) Copyright 2003-2004 Wolfgang Denk, DENX Software Engineering,
+ * wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#if 0
+#define DEBUG 0xFFF
+#endif
+
+#if 0
+#define DEBUG 0x01
+#endif
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+*/
+
+#define CONFIG_MPC5xxx			1	/* This is an MPC5xxx CPU	*/
+#define CONFIG_MPC5200			1	/* This is an MPC5200 CPU	*/
+#define CONFIG_V38B			1	/* ... on V38B board		*/
+#define CFG_MPC5XXX_CLKIN	33000000	/* ... running at 33.000000MHz	*/
+
+#define CONFIG_RTC_PCF8563		1	/* has PCF8563 RTC		*/
+#define CONFIG_MPC5200_DDR		1	/* has DDR SDRAM		*/
+#define CONFIG_HW_WATCHDOG		1	/* has watchdog			*/
+
+#define CONFIG_NETCONSOLE		1
+
+#define CONFIG_BOARD_EARLY_INIT_R	1	/* make flash read/write	*/
+
+#define CFG_XLB_PIPELINING		1	/* gives better performance	*/
+
+
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
+#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps	*/
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+
+/*
+ * DDR
+ */
+#define SDRAM_DDR		1	/* is DDR */
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE		0x018D0000
+#define SDRAM_EMODE		0x40090000
+#define SDRAM_CONTROL		0x704f0f00
+#define SDRAM_CONFIG1		0x73722930
+#define SDRAM_CONFIG2		0x47770000
+#define SDRAM_TAPDELAY		0x10000000
+
+
+/*
+ * PCI - no suport
+ */
+#undef CONFIG_PCI
+
+/*
+ * Partitions
+ */
+#define CONFIG_MAC_PARTITION	1
+#define CONFIG_DOS_PARTITION	1
+
+/*
+ * USB
+ */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | \
+				 CFG_CMD_FAT	| \
+				 CFG_CMD_I2C	| \
+				 CFG_CMD_IDE	| \
+				 CFG_CMD_PING	| \
+				 CFG_CMD_DHCP	| \
+				 CFG_CMD_DIAG	| \
+				 CFG_CMD_IRQ	| \
+				 CFG_CMD_JFFS2	| \
+				 CFG_CMD_MII	| \
+				 CFG_CMD_SDRAMi | \
+				 CFG_CMD_DATE	| \
+				 CFG_CMD_USB	| \
+				 CFG_CMD_FAT)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Boot low with 16 MB Flash
+ */
+#   define CFG_LOWBOOT		1
+#   define CFG_LOWBOOT16	1
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
+
+#define CONFIG_PREBOOT	"echo;" \
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"devno=5\0"							\
+	"hostname=V38B_$(devno)\0"					\
+	"ipaddr=10.100.99.$(devno)\0"					\
+	"netmask=255.255.0.0\0"						\
+	"serverip=10.100.10.90\0"					\
+	"gatewayip=10.100.254.254\0"					\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"rootpath=/opt/eldk/ppc_6xx\0"					\
+	"bootfile=mpc5200/uImage\0"					\
+	"bootcmd=run net_nfs\0"						\
+	"addip=setenv bootargs $(bootargs) "				\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):"		\
+		"$(netmask):$(hostname):$(netdev):off panic=1\0"	\
+	"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0"		\
+	"flash_self=run ramargs addip;bootm $(kernel_addr) "		\
+		"$(ramdisk_addr)\0"					\
+	"net_nfs=tftp 200000 $(bootfile);run nfsargs "			\
+		"addip;bootm\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$(serverip):$(rootpath)\0"			\
+	""
+
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
+
+#if defined(CONFIG_MPC5200)
+/*
+ * IPB Bus clocking configuration.
+ */
+#undef CFG_IPBSPEED_133			/* define for 133MHz speed */
+#endif
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
+#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+
+#define CFG_I2C_SPEED		100000 /* 100 kHz */
+#define CFG_I2C_SLAVE		0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CFG_I2C_EEPROM_ADDR_LEN		1
+#define CFG_EEPROM_PAGE_WRITE_BITS	3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+
+/*
+ * RTC configuration
+ */
+#define CFG_I2C_RTC_ADDR		0x51
+
+/*
+ * Flash configuration - use CFI driver
+ */
+#define CFG_FLASH_CFI		1		/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1		/* Use the common driver */
+#define CFG_FLASH_CFI_AMD_RESET 1
+#define CFG_FLASH_BASE		0xFF000000
+#define CFG_MAX_FLASH_BANKS	1		/* max num of flash banks */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_SIZE		0x01000000	/* 16 MiB */
+#define CFG_MAX_FLASH_SECT	256		/* max num of sects on one chip */
+#define CFG_FLASH_USE_BUFFER_WRITE	1	/* flash write speed-up */
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00040000)
+#define CFG_ENV_SIZE		0x10000
+#define CFG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_OVERWRITE	1
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR		0xF0000000
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_DEFAULT_MBAR	0x80000000
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+
+
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE    TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT		1
+#endif
+
+#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC	1
+#define CONFIG_PHY_ADDR		0x00
+#define CONFIG_MII		1
+
+/*
+ * GPIO configuration
+ */
+#define CFG_GPS_PORT_CONFIG	0x90000404
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	    */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL		HID0_ICE
+#else
+#define CFG_HID0_INIT		0
+#define CFG_HID0_FINAL		0
+#endif
+
+
+#define CFG_BOOTCS_START	CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG		0x00047801
+#define CFG_CS0_START		CFG_FLASH_BASE
+#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+
+#define CFG_CS_BURST		0x00000000
+#define CFG_CS_DEADCYCLE	0x33333333
+
+#define CFG_RESET_ADDRESS	0xff000000
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK	0x0001BBBB
+#define CONFIG_USB_CONFIG	0x00001000
+
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef	CONFIG_IDE_8xx_PCCARD		/* Don't use IDE with PC Card	Adapter */
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
+#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
+
+#define CONFIG_IDE_RESET		/* reset for ide supported	*/
+#define CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	(0x0060)
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	(0x005C)
+
+/* Interval between registers						     */
+#define CFG_ATA_STRIDE		4
+
+/* Status LED						     */
+
+#define	 CONFIG_STATUS_LED		 /* Status LED enabled		 */
+#define	 CONFIG_BOARD_SPECIFIC_LED	 /* version has board specific leds */
+
+#define CFG_LED_BASE	(0xf0000600 + 0x70)	/* Timer 7 GPIO */
+
+#ifndef __ASSEMBLY__
+/* LEDs */
+typedef unsigned int led_id_t;
+
+#define __led_toggle(_msk) \
+	do { \
+		*((volatile long *) (CFG_LED_BASE)) ^= (_msk); \
+	} while(0)
+
+#define __led_set(_msk, _st) \
+	do { \
+		if ((_st)) \
+			*((volatile long *) (CFG_LED_BASE)) &= ~(_msk); \
+		else \
+			*((volatile long *) (CFG_LED_BASE)) |= (_msk); \
+	} while(0)
+
+#define __led_init(_msk, st) \
+	{ \
+		*((volatile long *) (CFG_LED_BASE)) |= 0x34; \
+	}
+
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index 5d7bed6..372b10c 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -28,7 +28,7 @@
 #define CONFIG_MPC8260
 #define CPU_ID_STR		"MPC8270"
 
-#define CONFIG_EP82XXM	/* Embedded Planet EP82xxM H 1.0 board /*
+#define CONFIG_EP82XXM	/* Embedded Planet EP82xxM H 1.0 board */
 			/* 256MB SDRAM / 64MB FLASH */
 
 #undef DEBUG
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index f67fd91..3a76315 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -134,13 +134,6 @@
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 #endif
 
-/*-----------------------------------------------------------------------
- * NAND FLASH
- *----------------------------------------------------------------------*/
-#define CFG_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS		1
-#define CFG_NAND_BASE		CFG_NAND_ADDR
-
 /*
  * IPL (Initial Program Loader, integrated inside CPU)
  * Will load first 4k from NAND (SPL) into cache and execute it from there.
@@ -406,6 +399,14 @@
 #define CFG_EBC_PB2CR		(CFG_CPLD | 0x38000)
 
 /*-----------------------------------------------------------------------
+ * NAND FLASH
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
+#define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
+
+/*-----------------------------------------------------------------------
  * Cache Configuration
  *----------------------------------------------------------------------*/
 #define CFG_DCACHE_SIZE		(32<<10)  /* For AMCC 440 CPUs			*/
diff --git a/include/nand.h b/include/nand.h
index 5c7311f..23493f7 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -117,4 +117,8 @@ int nand_lock( nand_info_t *meminfo, int tight );
 int nand_unlock( nand_info_t *meminfo, ulong start, ulong length );
 int nand_get_lock_status(nand_info_t *meminfo, ulong offset);
 
+#ifdef CFG_NAND_SELECT_DEVICE
+void board_nand_select_device(struct nand_chip *nand, int chip);
+#endif
+
 #endif
diff --git a/include/status_led.h b/include/status_led.h
index a56883b..db4c60f 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -346,6 +346,15 @@ void status_led_set  (int led, int state);
 #elif defined(CONFIG_NIOS2)
 /* XXX empty just to avoid the error */
 /************************************************************************/
+#elif defined(CONFIG_V38B)
+
+# define STATUS_LED_BIT		0x0010			/* Timer7 GPIO */
+# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_STATE	STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE	0		/* LED on for bit == 0 */
+# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
+
 #else
 # error Status LED configuration missing
 #endif
diff --git a/lib_generic/crc32.c b/lib_generic/crc32.c
index 3db224a..3d99b69 100644
--- a/lib_generic/crc32.c
+++ b/lib_generic/crc32.c
@@ -171,8 +171,8 @@ uLong ZEXPORT crc32(crc, buf, len)
     return crc ^ 0xffffffffL;
 }
 
-#if ((CONFIG_COMMANDS & CFG_CMD_JFFS2) || (CONFIG_COMMANDS & CFG_CMD_NAND)) \
-	&& !defined(CFG_NAND_LEGACY)
+#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) || \
+	((CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY))
 
 /* No ones complement version. JFFS2 (and other things ?)
  * don't use ones compliment in their CRC calculations.
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index cf0e3fd..3e401be 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -805,7 +805,10 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif	/* CFG_EXTBDINFO */
 
 	s = getenv ("ethaddr");
-#if defined (CONFIG_MBX) || defined (CONFIG_RPXCLASSIC) || defined(CONFIG_IAD210)
+#if defined (CONFIG_MBX) || \
+    defined (CONFIG_RPXCLASSIC) || \
+    defined(CONFIG_IAD210) || \
+    defined(CONFIG_V38B)
 	if (s == NULL)
 		board_get_enetaddr (bd->bi_enetaddr);
 	else