diff options
| -rw-r--r-- | CHANGELOG | 145 | ||||
| -rw-r--r-- | Makefile | 2 | ||||
| -rw-r--r-- | doc/README.mpc8569mds | 1 |
3 files changed, 146 insertions, 2 deletions
@@ -1,3 +1,128 @@ +commit c3147c1762f8caf99649051116a2411bdf887c10 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jun 14 20:31:36 2009 +0200 + + Revert "SMC911x driver fixed for NFS boot" + + This reverts commit ca9c8a1e10fac01e6a1129f82a7ce18bd818fa43, + which causes compile warnings ("large integer implicitly truncated + to unsigned type") on all systems that use this driver. The warning + results from passing long constants (TX_CFG, RX_CFG) into + smc911x_set_mac_csr() which is declared to accept "unsigned + character" arguments only. + + Being close to a release, with nobody available to actually test the + code or the suggested fixes, it seems better to revert the patch. + +commit e7563aff174f77aa61dab1ef5d9b47bebaa43702 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jun 11 23:42:35 2009 -0500 + + fsl-ddr: Fix handling of >4G of memory when !CONFIG_PHYS_64BIT + + The ddr code computes most things as 64-bit quantities and had some places + in the middle that it was using phy_addr_t and phys_size_t. + + Instead we use unsigned long long through out and only at the last stage of + setting the LAWs and reporting the amount of memory to the board code do we + truncate down to what we can cover via phys_size_t. + + This has the added benefit that the DDR controller itself is always setup + the same way regardless of how much memory we have. Its only the LAW + setup that limits what is visible to the system. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit d4b130dc80761b430dc5b410159cd158fca1a348 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jun 11 23:40:34 2009 -0500 + + 85xx: Use print_size to report amount of memory not mapped by TLBs + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 6e2aebc33fa740c068fe28d40eaf0319b7c7287e +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Wed May 20 12:30:42 2009 -0400 + + 85xx: Add README for MPC8569MDS + + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit b2aab386e957ba684d4f2a466bfaa91770e5058a +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Wed May 20 12:30:33 2009 -0400 + + 85xx: Add UART1 support for MPC8569MDS + + MPC8569 UART1 signals are muxed with PortF bit[9-12], we need to define + those pins before using UART1. + + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 399b53cbab0b377ac4c5c16c19c6e41b68a9c719 +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Wed May 20 12:30:32 2009 -0400 + + 85xx: Add PIB support at CS4/CS5 for MPC8569MDS + + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + Signed-off-by: Yu Liu <Yu.Liu@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit fb27949059f1bc84381a6216a819090f0cdbaa70 +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Thu Jun 4 16:12:39 2009 -0400 + + 85xx: Fix some settings for MPC8569MDS board + + - Increase the size of malloc to 512KB because MPC8569MDS needs more memory for + malloc to support up to eight Ethernet interfaces. + - Move Environment address out of uboot thus the saved environment variables + will not be erased after u-boot is re-programmed. + + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit c7f60fd29f2d638d080cdf1a49ad985b85f9429d +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Wed May 20 12:30:30 2009 -0400 + + 85xx: Fix MURAM size for MPC8569 + + MPC8569 has 128K bytes MURAM. + + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit a53c997dd7fc858f2a27f5a47b200567b9343ae5 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Fri May 22 20:23:51 2009 +0200 + + at91/cpu.c: add missing Copyright & GPL header + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit aa446a591aca46ef2b53cc6598ea8091feb45444 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Sun Jun 7 21:45:16 2009 +0900 + + apollon: Fix a OBJCFLAGS typo + + Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com> + +commit 580611cb0932143fc2d7a735cfa9ce1ef34d6002 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jun 10 00:19:28 2009 +0200 + + Prepare 2009.06-rc3 + + Update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 3a76ab5c166d5956885f803ce975e7151cc0ca0e Author: Wolfgang Denk <wd@denx.de> Date: Wed Jun 10 00:15:11 2009 +0200 @@ -190,6 +315,26 @@ Date: Sun May 3 12:11:40 2009 +0200 Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> +commit 3c9b1ee17e19bd6d80344678d41a85e52b0be713 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Fri Jun 5 14:11:33 2009 -0500 + + mpc83xx: don't set SICRH_TSOBI1 to RMII/RTBI operation + + In GMII mode (which operates at 3.3V) both SICRH TSEC1/2 output buffer + impedance bits should be clear, i.e., SICRH[TSIOB1] = 0 and SICRH[TSIOB2] = 0. + SICRH[TSIOB1] was erroneously being set high. + + U-Boot always operated this PHY interface in GMII mode. It is assumed this + was missed in the clean up by the original board porters, and copied along + to the TQM and sbc boards. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + Acked-by: Ira Snyder <iws@ovro.caltech.edu> + Reviewed-by: David Hawkins <dwh@ovro.caltech.edu> + Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> + CC: Dave Liu <DaveLiu@freescale.com> + commit 2c0234fa79122a5aa77c4e17c33eb2fe184b61a7 Author: Daniel Mack <daniel@caiaq.de> Date: Wed Apr 8 13:23:37 2009 +0200 @@ -24,7 +24,7 @@ VERSION = 2009 PATCHLEVEL = 06 SUBLEVEL = -EXTRAVERSION = -rc3 +EXTRAVERSION = ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else diff --git a/doc/README.mpc8569mds b/doc/README.mpc8569mds index d9112b6..3d12a96 100644 --- a/doc/README.mpc8569mds +++ b/doc/README.mpc8569mds @@ -75,4 +75,3 @@ hangs at "Net:" Please note the above two steps(setting mac addresses and programming ucode) are very important to get the board booting up and working properly. - |