diff options
| -rw-r--r-- | drivers/mtd/cfi_flash.c | 174 |
1 files changed, 111 insertions, 63 deletions
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 14c2061..effcce4 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1302,13 +1302,105 @@ void flash_read_factory_serial (flash_info_t * info, void *buffer, int offset, #endif /* CFG_FLASH_PROTECTION */ +/*----------------------------------------------------------------------- + * Reverse the order of the erase regions in the CFI QRY structure. + * This is needed for chips that are either a) correctly detected as + * top-boot, or b) buggy. + */ +static void cfi_reverse_geometry(struct cfi_qry *qry) +{ + unsigned int i, j; + u32 tmp; + + for (i = 0, j = qry->num_erase_regions - 1; i < j; i++, j--) { + tmp = qry->erase_region_info[i]; + qry->erase_region_info[i] = qry->erase_region_info[j]; + qry->erase_region_info[j] = tmp; + } +} /*----------------------------------------------------------------------- * read jedec ids from device and set corresponding fields in info struct * * Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct * -*/ + */ +static void cmdset_intel_read_jedec_ids(flash_info_t *info) +{ + flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); + flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID); + udelay(1000); /* some flash are slow to respond */ + info->manufacturer_id = flash_read_uchar (info, + FLASH_OFFSET_MANUFACTURER_ID); + info->device_id = flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID); + flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); +} + +static int cmdset_intel_init(flash_info_t *info, struct cfi_qry *qry) +{ + info->cmd_reset = FLASH_CMD_RESET; + + cmdset_intel_read_jedec_ids(info); + flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI); + +#ifdef CFG_FLASH_PROTECTION + /* read legacy lock/unlock bit from intel flash */ + if (info->ext_addr) { + info->legacy_unlock = flash_read_uchar (info, + info->ext_addr + 5) & 0x08; + } +#endif + + return 0; +} + +static void cmdset_amd_read_jedec_ids(flash_info_t *info) +{ + flash_write_cmd(info, 0, 0, AMD_CMD_RESET); + flash_unlock_seq(info, 0); + flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID); + udelay(1000); /* some flash are slow to respond */ + info->manufacturer_id = flash_read_uchar (info, + FLASH_OFFSET_MANUFACTURER_ID); + info->device_id = flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID); + if (info->device_id == 0x7E) { + /* AMD 3-byte (expanded) device ids */ + info->device_id2 = flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID2); + info->device_id2 <<= 8; + info->device_id2 |= flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID3); + } + flash_write_cmd(info, 0, 0, AMD_CMD_RESET); +} + +static int cmdset_amd_init(flash_info_t *info, struct cfi_qry *qry) +{ + info->cmd_reset = AMD_CMD_RESET; + + cmdset_amd_read_jedec_ids(info); + flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI); + + /* check if flash geometry needs reversal */ + if (qry->num_erase_regions > 1) { + /* reverse geometry if top boot part */ + if (info->cfi_version < 0x3131) { + /* CFI < 1.1, try to guess from device id */ + if ((info->device_id & 0x80) != 0) + cfi_reverse_geometry(qry); + } else if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) { + /* CFI >= 1.1, deduct from top/bottom flag */ + /* note: ext_addr is valid since cfi_version > 0 */ + cfi_reverse_geometry(qry); + } + } + + return 0; +} + +#ifdef CONFIG_FLASH_CFI_LEGACY static void flash_read_jedec_ids (flash_info_t * info) { info->manufacturer_id = 0; @@ -1318,41 +1410,17 @@ static void flash_read_jedec_ids (flash_info_t * info) switch (info->vendor) { case CFI_CMDSET_INTEL_STANDARD: case CFI_CMDSET_INTEL_EXTENDED: - flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); - flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID); - udelay(1000); /* some flash are slow to respond */ - info->manufacturer_id = flash_read_uchar (info, - FLASH_OFFSET_MANUFACTURER_ID); - info->device_id = flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID); - flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); + flash_read_jedec_ids_intel(info); break; case CFI_CMDSET_AMD_STANDARD: case CFI_CMDSET_AMD_EXTENDED: - flash_write_cmd(info, 0, 0, AMD_CMD_RESET); - flash_unlock_seq(info, 0); - flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID); - udelay(1000); /* some flash are slow to respond */ - info->manufacturer_id = flash_read_uchar (info, - FLASH_OFFSET_MANUFACTURER_ID); - info->device_id = flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID); - if (info->device_id == 0x7E) { - /* AMD 3-byte (expanded) device ids */ - info->device_id2 = flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID2); - info->device_id2 <<= 8; - info->device_id2 |= flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID3); - } - flash_write_cmd(info, 0, 0, AMD_CMD_RESET); + flash_read_jedec_ids_amd(info); break; default: break; } } -#ifdef CONFIG_FLASH_CFI_LEGACY /*----------------------------------------------------------------------- * Call board code to request info about non-CFI flash. * board_flash_get_legacy needs to fill in at least: @@ -1514,7 +1582,6 @@ ulong flash_get_size (ulong base, int banknum) uchar num_erase_regions; int erase_region_size; int erase_region_count; - int geometry_reversed = 0; struct cfi_qry qry; info->ext_addr = 0; @@ -1530,51 +1597,36 @@ ulong flash_get_size (ulong base, int banknum) info->ext_addr = le16_to_cpu(qry.p_adr); num_erase_regions = qry.num_erase_regions; - flash_read_jedec_ids (info); - flash_write_cmd (info, 0, info->cfi_offset, FLASH_CMD_CFI); - if (info->ext_addr) { info->cfi_version = (ushort) flash_read_uchar (info, info->ext_addr + 3) << 8; info->cfi_version |= (ushort) flash_read_uchar (info, info->ext_addr + 4); } + #ifdef DEBUG flash_printqry (&qry); #endif + switch (info->vendor) { case CFI_CMDSET_INTEL_STANDARD: case CFI_CMDSET_INTEL_EXTENDED: - default: - info->cmd_reset = FLASH_CMD_RESET; -#ifdef CFG_FLASH_PROTECTION - /* read legacy lock/unlock bit from intel flash */ - if (info->ext_addr) { - info->legacy_unlock = flash_read_uchar (info, - info->ext_addr + 5) & 0x08; - } -#endif + cmdset_intel_init(info, &qry); break; case CFI_CMDSET_AMD_STANDARD: case CFI_CMDSET_AMD_EXTENDED: - info->cmd_reset = AMD_CMD_RESET; - /* check if flash geometry needs reversal */ - if (num_erase_regions <= 1) - break; - /* reverse geometry if top boot part */ - if (info->cfi_version < 0x3131) { - /* CFI < 1.1, try to guess from device id */ - if ((info->device_id & 0x80) != 0) { - geometry_reversed = 1; - } - break; - } - /* CFI >= 1.1, deduct from top/bottom flag */ - /* note: ext_addr is valid since cfi_version > 0 */ - if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) { - geometry_reversed = 1; - } + cmdset_amd_init(info, &qry); break; + default: + printf("CFI: Unknown command set 0x%x\n", + info->vendor); + /* + * Unfortunately, this means we don't know how + * to get the chip back to Read mode. Might + * as well try an Intel-style reset... + */ + flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); + return 0; } debug ("manufacturer is %d\n", info->vendor); @@ -1596,18 +1648,14 @@ ulong flash_get_size (ulong base, int banknum) sect_cnt = 0; sector = base; for (i = 0; i < num_erase_regions; i++) { - unsigned int region = i; - if (i > NUM_ERASE_REGIONS) { printf ("%d erase regions found, only %d used\n", num_erase_regions, NUM_ERASE_REGIONS); break; } - if (geometry_reversed) - region = num_erase_regions - 1 - i; - tmp = le32_to_cpu(qry.erase_region_info[region]); - debug("erase region %u: 0x%08lx\n", region, tmp); + tmp = le32_to_cpu(qry.erase_region_info[i]); + debug("erase region %u: 0x%08lx\n", i, tmp); erase_region_count = (tmp & 0xffff) + 1; tmp >>= 16; |