diff options
| -rw-r--r-- | CHANGELOG | 4 | ||||
| -rw-r--r-- | common/cmd_flash.c | 108 |
2 files changed, 108 insertions, 4 deletions
@@ -2,6 +2,10 @@ Changes for U-Boot 1.1.3: ====================================================================== +* Add new argument format for flash commands to allow for usage like + "erase $(addr) +$(filesize)", i. e. a size argument can be used and + U-Boot will automaticially find the end of the corresponding sector. + * Patch by Stefan Roese, 5 Jul 2005: Update uc100 board PHY setup diff --git a/common/cmd_flash.c b/common/cmd_flash.c index b2728ab..a0ccdb6 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -96,6 +96,93 @@ abbrev_spec (char *str, flash_info_t ** pinfo, int *psf, int *psl) return 1; } +/* + * This function computes the start and end addresses for both + * erase and protect commands. The range of the addresses on which + * either of the commands is to operate can be given in two forms: + * 1. <cmd> start end - operate on <'start', 'end') + * 2. <cmd> start +length - operate on <'start', start + length) + * If the second form is used and the end address doesn't fall on the + * sector boundary, than it will be adjusted to the next sector boundary. + * If it isn't in the flash, the function will fail (return -1). + * Input: + * arg1, arg2: address specification (i.e. both command arguments) + * Output: + * addr_first, addr_last: computed address range + * Return: + * 1: success + * -1: failure (bad format, bad address). +*/ +static int +addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last) +{ + char *ep; + *addr_first = simple_strtoul(arg1, &ep, 16); + if (ep == arg1 || *ep != '\0') + return -1; + + char len_used = 0; /* indicates if the "start +length" form used */ + if (arg2 && *arg2 == '+'){ + len_used = 1; + ++arg2; + } + + *addr_last = simple_strtoul(arg2, &ep, 16); + if (ep == arg2 || *ep != '\0') + return -1; + + if (len_used){ + /* + * *addr_last has the length, compute correct *addr_last + * XXX watch out for the integer overflow! Right now it is + * checked for in both the callers. + */ + *addr_last = *addr_first + *addr_last - 1; + + /* + * It may happen that *addr_last doesn't fall on the sector + * boundary. We want to round such an address to the next + * sector boundary, so that the commands don't fail later on. + */ + + /* find the end addr of the sector where the *addr_last is */ + char found = 0; + ulong bank; + for (bank = 0; bank < CFG_MAX_FLASH_BANKS && !found; ++bank){ + int i; + flash_info_t *info = &flash_info[bank]; + for (i = 0; i < info->sector_count && !found; ++i){ + /* get the end address of the sector */ + ulong sector_end_addr; + if (i == info->sector_count - 1){ + sector_end_addr = + info->start[0] + info->size - 1; + } else { + sector_end_addr = + info->start[i+1] - 1; + } + if (*addr_last <= sector_end_addr && + *addr_last >= info->start[i]){ + /* sector found */ + found = 1; + /* adjust *addr_last if necessary */ + if (*addr_last < sector_end_addr){ + *addr_last = sector_end_addr; + } + } + } /* sector */ + } /* bank */ + if (!found){ + /* error, addres not in flash */ + printf("Error: end address (0x%08lx) not in flash!\n", + *addr_last); + return -1; + } + } /* "start +length" from used */ + + return 1; +} + static int flash_fill_sect_ranges (ulong addr_first, ulong addr_last, int *s_first, int *s_last, @@ -256,8 +343,10 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return rcode; } - addr_first = simple_strtoul(argv[1], NULL, 16); - addr_last = simple_strtoul(argv[2], NULL, 16); + if (addr_spec(argv[1], argv[2], &addr_first, &addr_last) < 0){ + printf ("Bad address format\n"); + return 1; + } if (addr_first >= addr_last) { printf ("Usage:\n%s\n", cmdtp->usage); @@ -435,8 +524,10 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return rcode; } - addr_first = simple_strtoul(argv[2], NULL, 16); - addr_last = simple_strtoul(argv[3], NULL, 16); + if (addr_spec(argv[2], argv[3], &addr_first, &addr_last) < 0){ + printf("Bad address format\n"); + return 1; + } if (addr_first >= addr_last) { printf ("Usage:\n%s\n", cmdtp->usage); @@ -511,6 +602,9 @@ U_BOOT_CMD( "erase - erase FLASH memory\n", "start end\n" " - erase FLASH from addr 'start' to addr 'end'\n" + "erase start +len\n" + " - erase FLASH from addr 'start' to the end of sect " + "w/addr 'start'+'len'-1\n" "erase N:SF[-SL]\n - erase sectors SF-SL in FLASH bank # N\n" "erase bank N\n - erase FLASH bank # N\n" "erase all\n - erase all FLASH banks\n" @@ -521,12 +615,18 @@ U_BOOT_CMD( "protect - enable or disable FLASH write protection\n", "on start end\n" " - protect FLASH from addr 'start' to addr 'end'\n" + "protect on start +len\n" + " - protect FLASH from addr 'start' to end of sect " + "w/addr 'start'+'len'-1\n" "protect on N:SF[-SL]\n" " - protect sectors SF-SL in FLASH bank # N\n" "protect on bank N\n - protect FLASH bank # N\n" "protect on all\n - protect all FLASH banks\n" "protect off start end\n" " - make FLASH from addr 'start' to addr 'end' writable\n" + "protect off start +len\n" + " - make FLASH from addr 'start' to end of sect " + "w/addr 'start'+'len'-1 wrtable\n" "protect off N:SF[-SL]\n" " - make sectors SF-SL writable in FLASH bank # N\n" "protect off bank N\n - make FLASH bank # N writable\n" |