diff options
330 files changed, 18294 insertions, 13137 deletions
@@ -236,6 +236,10 @@ E: mark.jonas@freescale.com D: Support for Freescale Total5200 platform W: http://www.mobilegt.com/ +N: Mark Jonas +E: mark.jonas@de.bosch.com +D: Support for MPR2 board + N: Sam Song E: samsongshu@yahoo.com.cn D: Port to the RPXlite_DW board @@ -431,6 +435,7 @@ D: Support for EP82xxM N: Art Shipkowski E: art@videon-central.com D: Support for NetSilicon NS7520 +D: Support for ColdFire MCF5275 N: Michal Simek E: monstr@monstr.eu diff --git a/MAINTAINERS b/MAINTAINERS index e31ea06..33821b8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -322,6 +322,7 @@ Stefan Roese <sr@denx.de> bunbinga PPC405EP canyonlands PPC460EX ebony PPC440GP + glacier PPC460GT haleakala PPC405EXr katmai PPC440SPe kilauea PPC405EX @@ -529,6 +530,11 @@ Dave Peverley <dpeverley@mpc-data.co.uk> omap730p2 ARM926EJS +Stelian Pop <stelian.pop@leadtechdesign.com> + + at91cap9adk ARM926EJS (AT91CAP9 SoC) + at91sam9260ek ARM926EJS (AT91SAM9260 SoC) + Stefan Roese <sr@denx.de> ixdpg425 xscale @@ -654,10 +660,6 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com> TASREG MCF5249 -Zachary P. Landau <zachary.landau@labxtechnologies.com> - - r5200 mcf52x2 - TsiChung Liew <Tsi-Chung.Liew@freescale.com> M52277EVB mcf5227x @@ -694,15 +696,25 @@ Haavard Skinnemoen <hskinnemoen@atmel.com> # Board CPU # ######################################################################### -Nobuhiro Iwmaatsu <iwamatsu@nigauri.org> +Nobuhiro Iwamatsu <iwamatsu@nigauri.org> MS7750SE SH7750 MS7722SE SH7722 + R7780MP SH7780 + R2DPlus SH7751R + +Mark Jonas <mark.jonas@de.bosch.com> + + mpr2 SH7720 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> MS7720SE SH7720 +Yusuke Goda <goda.yusuke@renesas.com> + + MIGO-R SH7722 + ######################################################################### # Blackfin Systems: # # # @@ -185,6 +185,7 @@ LIST_4xx=" \ ERIC \ EXBITGEN \ G2000 \ + glacier \ haleakala \ haleakala_nand \ hcu4 \ @@ -451,6 +452,7 @@ LIST_ARM7=" \ LIST_ARM9=" \ at91cap9adk \ at91rm9200dk \ + at91sam9260ek \ cmc_pu2 \ ap920t \ ap922_XA10 \ @@ -462,6 +464,8 @@ LIST_ARM9=" \ cp926ejs \ cp946es \ cp966 \ + csb637 \ + kb9202 \ lpd7a400 \ m501sk \ mp2usb \ @@ -471,6 +475,7 @@ LIST_ARM9=" \ omap1510inn \ omap1610h2 \ omap1610inn \ + omap5912osk \ omap730p2 \ sbc2410x \ scb9328 \ @@ -485,6 +490,7 @@ LIST_ARM9=" \ davinci_dvevm \ davinci_schmoogie \ davinci_sonata \ + pmdra \ " ######################################################################### @@ -502,6 +508,9 @@ LIST_ARM11=" \ cp1136 \ omap2420h4 \ apollon \ + imx31_litekit \ + imx31_phycore \ + mx31ads \ " ######################################################################### @@ -660,13 +669,13 @@ LIST_coldfire=" \ M5253EVB \ M5271EVB \ M5272C3 \ + M5275EVB \ M5282EVB \ M5329AFEE \ M5373EVB \ M54455EVB \ M5475AFE \ M5485AFE \ - r5200 \ TASREG \ " @@ -699,9 +708,13 @@ LIST_blackfin=" \ LIST_sh4=" \ ms7750se \ ms7722se \ + Migo-R \ + r7780mp \ + r2dplus \ " LIST_sh3=" \ + mpr2 \ ms7720se \ " @@ -1172,8 +1172,13 @@ bubinga_config: unconfig CANBT_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd -canyonlands_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx canyonlands amcc +# Canyonlands & Glacier use different U-Boot images +canyonlands_config \ +glacier_config: unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ + tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h + @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc canyonlands_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/canyonlands @@ -1819,15 +1824,15 @@ M5271EVB_config : unconfig M5272C3_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 +M5275EVB_config : unconfig + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale + M5282EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb TASREG_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd -r5200_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 r5200 - M5329AFEE_config \ M5329BFEE_config : unconfig @case "$@" in \ @@ -2303,11 +2308,14 @@ xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$ xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) at91cap9adk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91cap9 + @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91sam9 at91rm9200dk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 +at91sam9260ek_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91sam9 + cmc_pu2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 @@ -2377,6 +2385,9 @@ davinci_schmoogie_config : unconfig davinci_sonata_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci +pmdra_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs pmdra prodrive davinci + omap1610inn_config \ omap1610inn_cs0boot_config \ omap1610inn_cs3boot_config \ @@ -2587,14 +2598,23 @@ zylonite_config : ## ARM1136 Systems ######################################################################### omap2420h4_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 + @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx apollon_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h - @$(MKCONFIG) $(@:_config=) arm arm1136 apollon + @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk +imx31_litekit_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31 + +imx31_phycore_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31 + +mx31ads_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31 + #======================================================================== # i386 #======================================================================== @@ -2805,7 +2825,7 @@ xupv2p_config: unconfig BFIN_BOARDS = bf533-ezkit bf533-stamp bf537-stamp bf561-ezkit $(BFIN_BOARDS:%=%_config) : unconfig - @$(MKCONFIG) $(@:_config=) blackfin $(firstword $(subst -, ,$@)) $(@:_config=) + @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) $(BFIN_BOARDS): $(MAKE) $@_config @@ -2837,6 +2857,11 @@ atngw100_config : unconfig ######################################################################### ## sh3 (Renesas SuperH) ######################################################################### +mpr2_config: unconfig + @ >include/config.h + @echo "#define CONFIG_MPR2 1" >> include/config.h + @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2 + ms7720se_config: unconfig @echo "#define CONFIG_MS7720SE 1" > include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se @@ -2852,6 +2877,21 @@ ms7722se_config : unconfig @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se +MigoR_config : unconfig + @ >include/config.h + @echo "#define CONFIG_MIGO_R 1" >> include/config.h + @./mkconfig -a $(@:_config=) sh sh4 MigoR + +r7780mp_config: unconfig + @ >include/config.h + @echo "#define CONFIG_R7780MP 1" >> include/config.h + @./mkconfig -a $(@:_config=) sh sh4 r7780mp + +r2dplus_config : unconfig + @ >include/config.h + @echo "#define CONFIG_R2DPLUS 1" >> include/config.h + @./mkconfig -a $(@:_config=) sh sh4 r2dplus + ######################################################################### ######################################################################### ######################################################################### @@ -2873,7 +2913,8 @@ clean: $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ $(obj)board/{integratorap,integratorcp}/u-boot.lds \ - $(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds + $(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds \ + $(obj)cpu/blackfin/bootrom-asm-offsets.[chs] @rm -f $(obj)include/bmp_logo.h $(obj)nand_spl/{u-boot-spl,u-boot-spl.map} @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map} @rm -f $(obj)api_examples/demo $(VERSION_FILE) @@ -738,6 +738,9 @@ The following options need to be configured: CONFIG_E1000 Support for Intel 8254x gigabit chips. + CONFIG_E1000_FALLBACK_MAC + default MAC for empty eeprom after production. + CONFIG_EEPRO100 Support for Intel 82557/82559/82559ER chips. Optional CONFIG_EEPRO100_SROM_WRITE enables eeprom @@ -1138,6 +1141,20 @@ The following options need to be configured: of the "hostname" environment variable is passed as option 12 to the DHCP server. + CONFIG_BOOTP_DHCP_REQUEST_DELAY + + A 32bit value in microseconds for a delay between + receiving a "DHCP Offer" and sending the "DHCP Request". + This fixes a problem with certain DHCP servers that don't + respond 100% of the time to a "DHCP request". E.g. On an + AT91RM9200 processor running at 180MHz, this delay needed + to be *at least* 15,000 usec before a Windows Server 2003 + DHCP server would reply 100% of the time. I recommend at + least 50,000 usec to be safe. The alternative is to hope + that one of the retries will be successful but note that + the DHCP timeout and retry process takes a longer than + this delay. + - CDP Options: CONFIG_CDP_DEVICE_ID @@ -1916,6 +1933,27 @@ Configuration Settings: Scratch address used by the alternate memory test You only need to set this if address zero isn't writeable +- CFG_MEM_TOP_HIDE (PPC only): + If CFG_MEM_TOP_HIDE is defined in the board config header, + this specified memory area will get subtracted from the top + (end) of ram and won't get "touched" at all by U-Boot. By + fixing up gd->ram_size the Linux kernel should gets passed + the now "corrected" memory size and won't touch it either. + This should work for arch/ppc and arch/powerpc. Only Linux + board ports in arch/powerpc with bootwrapper support that + recalculate the memory size from the SDRAM controller setup + will have to get fixed in Linux additionally. + + This option can be used as a workaround for the 440EPx/GRx + CHIP 11 errata where the last 256 bytes in SDRAM shouldn't + be touched. + + WARNING: Please make sure that this value is a multiple of + the Linux page size (normally 4k). If this is not the case, + then the end address of the Linux memory will be located at a + non page size aligned address and this could cause major + problems. + - CFG_TFTP_LOADADDR: Default load address for network file downloads diff --git a/blackfin_config.mk b/blackfin_config.mk index d90eb23..a9a3d1a 100644 --- a/blackfin_config.mk +++ b/blackfin_config.mk @@ -21,6 +21,9 @@ # MA 02111-1307 USA # +CONFIG_BFIN_CPU := $(strip $(subst ",,$(CONFIG_BFIN_CPU))) +CONFIG_BFIN_BOOT_MODE := $(strip $(subst ",,$(CONFIG_BFIN_BOOT_MODE))) + PLATFORM_RELFLAGS += -ffixed-P5 PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN diff --git a/board/MigoR/Makefile b/board/MigoR/Makefile new file mode 100644 index 0000000..5a9d651 --- /dev/null +++ b/board/MigoR/Makefile @@ -0,0 +1,48 @@ +# +# Copyright (C) 2007 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# Copyright (C) 2007 +# Kenati Technologies, Inc. +# +# board/MigoR/Makefile +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := migo_r.o +SOBJS := lowlevel_init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/cpu/bf561/config.mk b/board/MigoR/config.mk index 3628a02..c68cb72 100644 --- a/cpu/bf561/config.mk +++ b/board/MigoR/config.mk @@ -1,12 +1,11 @@ -# U-boot - config.mk # -# Copyright (c) 2005-2007 Analog Devices Inc. +# Copyright (C) 2007 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> # -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Copyright (C) 2007 +# Kenati Technologies, Inc. # -# See file CREDITS for list of people who contributed to this -# project. +# board/MigoR/config.mk # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as @@ -20,8 +19,14 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +# +# TEXT_BASE refers to image _after_ relocation. # +# NOTE: Must match value used in u-boot.lds (in this directory). +# + +TEXT_BASE = 0x8FFC0000 -PLATFORM_RELFLAGS += -mcpu=bf561 diff --git a/board/MigoR/lowlevel_init.S b/board/MigoR/lowlevel_init.S new file mode 100644 index 0000000..7fd771d --- /dev/null +++ b/board/MigoR/lowlevel_init.S @@ -0,0 +1,269 @@ +/* + * Copyright (C) 2007 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * Copyright (C) 2007 + * Kenati Technologies, Inc. + * + * board/MigoR/lowlevel_init.S + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> + +#include <asm/processor.h> + +/* + * Board specific low level init code, called _very_ early in the + * startup sequence. Relocation to SDRAM has not happened yet, no + * stack is available, bss section has not been initialised, etc. + * + * (Note: As no stack is available, no subroutines can be called...). + */ + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + + mov.l CCR_A, r1 ! Address of Cache Control Register + mov.l CCR_D, r0 ! Instruction Cache Invalidate + mov.l r0, @r1 + + mov.l MMUCR_A, r1 ! Address of MMU Control Register + mov.l MMUCR_D, r0 ! TI == TLB Invalidate bit + mov.l r0, @r1 + + mov.l MSTPCR0_A, r1 ! Address of Power Control Register 0 + mov.l MSTPCR0_D, r0 ! + mov.l r0, @r1 + + mov.l MSTPCR2_A, r1 ! Address of Power Control Register 2 + mov.l MSTPCR2_D, r0 ! + mov.l r0, @r1 + + mov.l PFC_PULCR_A, r1 + mov.w PFC_PULCR_D, r0 + mov.w r0,@r1 + + mov.l PFC_DRVCR_A, r1 + mov.w PFC_DRVCR_D, r0 + mov.w r0, @r1 + + mov.l SBSCR_A, r1 ! + mov.w SBSCR_D, r0 ! + mov.w r0, @r1 + + mov.l PSCR_A, r1 ! + mov.w PSCR_D, r0 ! + mov.w r0, @r1 + + mov.l RWTCSR_A, r1 ! 0xA4520004 (Watchdog Control / Status Register) + mov.w RWTCSR_D_1, r0 ! 0xA507 -> timer_STOP/WDT_CLK=max + mov.w r0, @r1 + + mov.l RWTCNT_A, r1 ! 0xA4520000 (Watchdog Count Register) + mov.w RWTCNT_D, r0 ! 0x5A00 -> Clear + mov.w r0, @r1 + + mov.l RWTCSR_A, r1 ! 0xA4520004 (Watchdog Control / Status Register) + mov.w RWTCSR_D_2, r0 ! 0xA504 -> timer_STOP/CLK=500ms + mov.w r0, @r1 + + mov.l DLLFRQ_A, r1 ! 20080115 + mov.l DLLFRQ_D, r0 ! 20080115 + mov.l r0, @r1 + + mov.l FRQCR_A, r1 ! 0xA4150000 Frequency control register + mov.l FRQCR_D, r0 ! 20080115 + mov.l r0, @r1 + + mov.l CCR_A, r1 ! Address of Cache Control Register + mov.l CCR_D_2, r0 ! ?? + mov.l r0, @r1 + +bsc_init: + + mov.l CMNCR_A, r1 ! CMNCR address -> R1 + mov.l CMNCR_D, r0 ! CMNCR data -> R0 + mov.l r0, @r1 ! CMNCR set + + mov.l CS0BCR_A, r1 ! CS0BCR address -> R1 + mov.l CS0BCR_D, r0 ! CS0BCR data -> R0 + mov.l r0, @r1 ! CS0BCR set + + mov.l CS4BCR_A, r1 ! CS4BCR address -> R1 + mov.l CS4BCR_D, r0 ! CS4BCR data -> R0 + mov.l r0, @r1 ! CS4BCR set + + mov.l CS5ABCR_A, r1 ! CS5ABCR address -> R1 + mov.l CS5ABCR_D, r0 ! CS5ABCR data -> R0 + mov.l r0, @r1 ! CS5ABCR set + + mov.l CS5BBCR_A, r1 ! CS5BBCR address -> R1 + mov.l CS5BBCR_D, r0 ! CS5BBCR data -> R0 + mov.l r0, @r1 ! CS5BBCR set + + mov.l CS6ABCR_A, r1 ! CS6ABCR address -> R1 + mov.l CS6ABCR_D, r0 ! CS6ABCR data -> R0 + mov.l r0, @r1 ! CS6ABCR set + + mov.l CS0WCR_A, r1 ! CS0WCR address -> R1 + mov.l CS0WCR_D, r0 ! CS0WCR data -> R0 + mov.l r0, @r1 ! CS0WCR set + + mov.l CS4WCR_A, r1 ! CS4WCR address -> R1 + mov.l CS4WCR_D, r0 ! CS4WCR data -> R0 + mov.l r0, @r1 ! CS4WCR set + + mov.l CS5AWCR_A, r1 ! CS5AWCR address -> R1 + mov.l CS5AWCR_D, r0 ! CS5AWCR data -> R0 + mov.l r0, @r1 ! CS5AWCR set + + mov.l CS5BWCR_A, r1 ! CS5BWCR address -> R1 + mov.l CS5BWCR_D, r0 ! CS5BWCR data -> R0 + mov.l r0, @r1 ! CS5BWCR set + + mov.l CS6AWCR_A, r1 ! CS6AWCR address -> R1 + mov.l CS6AWCR_D, r0 ! CS6AWCR data -> R0 + mov.l r0, @r1 ! CS6AWCR set + + ! SDRAM initialization + mov.l SDCR_A, r1 ! SB_SDCR address -> R1 + mov.l SDCR_D, r0 ! SB_SDCR data -> R0 + mov.l r0, @r1 ! SB_SDCR set + + mov.l SDWCR_A, r1 ! SB_SDWCR address -> R1 + mov.l SDWCR_D, r0 ! SB_SDWCR data -> R0 + mov.l r0, @r1 ! SB_SDWCR set + + mov.l SDPCR_A, r1 ! SB_SDPCR address -> R1 + mov.l SDPCR_D, r0 ! SB_SDPCR data -> R0 + mov.l r0, @r1 ! SB_SDPCR set + + mov.l RTCOR_A, r1 ! SB_RTCOR address -> R1 + mov.l RTCOR_D, r0 ! SB_RTCOR data -> R0 + mov.l r0, @r1 ! SB_RTCOR set + + mov.l RTCNT_A, r1 ! SB_RTCNT address -> R1 + mov.l RTCNT_D, r0 ! SB_RTCNT data -> R0 + mov.l r0, @r1 + + mov.l RTCSR_A, r1 ! SB_RTCSR address -> R1 + mov.l RTCSR_D, r0 ! SB_RTCSR data -> R0 + mov.l r0, @r1 ! SB_RTCSR set + + mov.l RFCR_A, r1 ! SB_RFCR address -> R1 + mov.l RFCR_D, r0 ! SB_RFCR data -> R0 + mov.l r0, @r1 + + mov.l SDMR3_A, r1 ! SDMR3 address -> R1 + mov #0x00, r0 ! SDMR3 data -> R0 + mov.b r0, @r1 ! SDMR3 set + + ! BL bit off (init = ON) (?!?) + + stc sr, r0 ! BL bit off(init=ON) + mov.l SR_MASK_D, r1 + and r1, r0 + ldc r0, sr + + rts + mov #0, r0 + + + + .align 4 + +CCR_A: .long CCR +MMUCR_A: .long MMUCR +MSTPCR0_A: .long MSTPCR0 +MSTPCR2_A: .long MSTPCR2 +PFC_PULCR_A: .long PULCR +PFC_DRVCR_A: .long DRVCR +SBSCR_A: .long SBSCR +PSCR_A: .long PSCR +RWTCSR_A: .long RWTCSR +RWTCNT_A: .long RWTCNT +FRQCR_A: .long FRQCR +PLLCR_A: .long PLLCR +DLLFRQ_A: .long DLLFRQ + +CCR_D: .long 0x00000800 +CCR_D_2: .long 0x00000103 +MMUCR_D: .long 0x00000004 +MSTPCR0_D: .long 0x00001001 +MSTPCR2_D: .long 0xffffffff +PFC_PULCR_D: .long 0x6000 +PFC_DRVCR_D: .long 0x0464 +FRQCR_D: .long 0x07033639 +PLLCR_D: .long 0x00005000 +DLLFRQ_D: .long 0x000004F6 ! 20080115 + +CMNCR_A: .long CMNCR +CMNCR_D: .long 0x0000001B ! 20080115 +CS0BCR_A: .long CS0BCR ! Flash bank 1 +CS0BCR_D: .long 0x24920400 +CS4BCR_A: .long CS4BCR ! +CS4BCR_D: .long 0x10003400 ! 20080115 +CS5ABCR_A: .long CS5ABCR ! +CS5ABCR_D: .long 0x24920400 +CS5BBCR_A: .long CS5BBCR ! +CS5BBCR_D: .long 0x24920400 +CS6ABCR_A: .long CS6ABCR ! +CS6ABCR_D: .long 0x24920400 + +CS0WCR_A: .long CS0WCR +CS0WCR_D: .long 0x00000380 +CS4WCR_A: .long CS4WCR +CS4WCR_D: .long 0x00100A81 ! 20080115 +CS5AWCR_A: .long CS5AWCR +CS5AWCR_D: .long 0x00000300 +CS5BWCR_A: .long CS5BWCR +CS5BWCR_D: .long 0x00000300 +CS6AWCR_A: .long CS6AWCR +CS6AWCR_D: .long 0x00000300 + +SDCR_A: .long SBSC_SDCR +SDCR_D: .long 0x80160809 ! 20080115 +SDWCR_A: .long SBSC_SDWCR +SDWCR_D: .long 0x0014450C ! 20080115 +SDPCR_A: .long SBSC_SDPCR +SDPCR_D: .long 0x00000087 +RTCOR_A: .long SBSC_RTCOR +RTCNT_A: .long SBSC_RTCNT +RTCNT_D: .long 0xA55A0012 +RTCOR_D: .long 0xA55A001C ! 20080115 +RTCSR_A: .long SBSC_RTCSR +RFCR_A: .long SBSC_RFCR +RFCR_D: .long 0xA55A0221 +RTCSR_D: .long 0xA55A009a ! 20080115 +SDMR3_A: .long 0xFE581180 ! 20080115 + +SR_MASK_D: .long 0xEFFFFF0F + + .align 2 + +SBSCR_D: .word 0x0044 +PSCR_D: .word 0x0000 +RWTCSR_D_1: .word 0xA507 +RWTCSR_D_2: .word 0xA504 ! 20080115 +RWTCNT_D: .word 0x5A00 + diff --git a/board/MigoR/migo_r.c b/board/MigoR/migo_r.c new file mode 100644 index 0000000..53f4bb2 --- /dev/null +++ b/board/MigoR/migo_r.c @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2007 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * Copyright (C) 2007 + * Kenati Technologies, Inc. + * + * board/MigoR/migo_r.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> + +int checkboard(void) +{ + puts("BOARD: Renesas MigoR\n"); + return 0; +} + +int board_init(void) +{ + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_SDRAM_SIZE; + printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + +void led_set_state (unsigned short value) +{ +} + diff --git a/board/MigoR/u-boot.lds b/board/MigoR/u-boot.lds new file mode 100644 index 0000000..1877b81 --- /dev/null +++ b/board/MigoR/u-boot.lds @@ -0,0 +1,106 @@ +/* + * Copyrigth (c) 2007 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +SECTIONS +{ + /* + Base address of internal SDRAM is 0x0C000000. + Although size of SDRAM can be either 16 or 32 MBytes, + we assume 16 MBytes (ie ignore upper half if the full + 32 MBytes is present). + + NOTE: This address must match with the definition of + TEXT_BASE in config.mk (in this directory). + + */ + . = 0x8C000000 + (64*1024*1024) - (256*1024); + + PROVIDE (reloc_dst = .); + + PROVIDE (_ftext = .); + PROVIDE (_fcode = .); + PROVIDE (_start = .); + + .text : + { + cpu/sh4/start.o (.text) + . = ALIGN(8192); + common/environment.o (.ppcenv) + . = ALIGN(8192); + common/environment.o (.ppcenvr) + . = ALIGN(8192); + *(.text) + . = ALIGN(4); + } =0xFF + PROVIDE (_ecode = .); + .rodata : + { + *(.rodata) + . = ALIGN(4); + } + PROVIDE (_etext = .); + + + PROVIDE (_fdata = .); + .data : + { + *(.data) + . = ALIGN(4); + } + PROVIDE (_edata = .); + + PROVIDE (_fgot = .); + .got : + { + *(.got) + . = ALIGN(4); + } + PROVIDE (_egot = .); + + PROVIDE (__u_boot_cmd_start = .); + .u_boot_cmd : + { + *(.u_boot_cmd) + . = ALIGN(4); + } + PROVIDE (__u_boot_cmd_end = .); + + PROVIDE (reloc_dst_end = .); + /* _reloc_dst_end = .; */ + + PROVIDE (bss_start = .); + PROVIDE (__bss_start = .); + .bss : + { + *(.bss) + . = ALIGN(4); + } + PROVIDE (bss_end = .); + + PROVIDE (_end = .); +} + diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 36779f5..9986e9a 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -32,13 +32,20 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ DECLARE_GLOBAL_DATA_PTR; +#define CFG_BCSR3_PCIE 0x10 + +#define BOARD_CANYONLANDS_PCIE 1 +#define BOARD_CANYONLANDS_SATA 2 +#define BOARD_GLACIER 3 + int board_early_init_f(void) { u32 sdr0_cust0; + u32 pvr = get_pvr(); - /*------------------------------------------------------------------+ + /* * Setup the interrupt controller polarities, triggers, etc. - *------------------------------------------------------------------*/ + */ mtdcr(uic0sr, 0xffffffff); /* clear all */ mtdcr(uic0er, 0x00000000); /* disable all */ mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ @@ -105,27 +112,69 @@ int board_early_init_f(void) mtdcr(AHB_TOP, 0x8000004B); mtdcr(AHB_BOT, 0x8000004B); - /* - * Configure USB-STP pins as alternate and not GPIO - * It seems to be neccessary to configure the STP pins as GPIO - * input at powerup (perhaps while USB reset is asserted). So - * we configure those pins to their "real" function now. - */ - gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); - gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); + if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) { + /* + * Configure USB-STP pins as alternate and not GPIO + * It seems to be neccessary to configure the STP pins as GPIO + * input at powerup (perhaps while USB reset is asserted). So + * we configure those pins to their "real" function now. + */ + gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); + gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); + } return 0; } -int checkboard (void) +static void canyonlands_sata_init(int board_type) +{ + u32 reg; + + if (board_type == BOARD_CANYONLANDS_SATA) { + /* Put SATA in reset */ + SDR_WRITE(SDR0_SRST1, 0x00020001); + + /* Set the phy for SATA, not PCI-E port 0 */ + reg = SDR_READ(PESDR0_PHY_CTL_RST); + SDR_WRITE(PESDR0_PHY_CTL_RST, (reg & 0xeffffffc) | 0x00000001); + reg = SDR_READ(PESDR0_L0CLK); + SDR_WRITE(PESDR0_L0CLK, (reg & 0xfffffff8) | 0x00000007); + SDR_WRITE(PESDR0_L0CDRCTL, 0x00003111); + SDR_WRITE(PESDR0_L0DRV, 0x00000104); + + /* Bring SATA out of reset */ + SDR_WRITE(SDR0_SRST1, 0x00000000); + } +} + +int checkboard(void) { char *s = getenv("serial#"); u32 pvr = get_pvr(); - if ((pvr == PVR_460GT_RA) || (pvr == PVR_460GT_SE_RA)) + if ((pvr == PVR_460GT_RA) || (pvr == PVR_460GT_SE_RA)) { printf("Board: Glacier - AMCC PPC460GT Evaluation Board"); - else + gd->board_type = BOARD_GLACIER; + } else { printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board"); + if (in_8((void *)(CFG_BCSR_BASE + 3)) & CFG_BCSR3_PCIE) + gd->board_type = BOARD_CANYONLANDS_PCIE; + else + gd->board_type = BOARD_CANYONLANDS_SATA; + } + + switch (gd->board_type) { + case BOARD_CANYONLANDS_PCIE: + case BOARD_GLACIER: + puts(", 2*PCIe"); + break; + + case BOARD_CANYONLANDS_SATA: + puts(", 1*PCIe/1*SATA"); + break; + } + + printf(", Rev. %X", in_8((void *)(CFG_BCSR_BASE + 0))); if (s != NULL) { puts(", serial# "); @@ -133,6 +182,8 @@ int checkboard (void) } putc('\n'); + canyonlands_sata_init(gd->board_type); + return (0); } @@ -198,37 +249,36 @@ int testdram(void) } #endif -/************************************************************************* +/* * pci_target_init * * The bootstrap configuration provides default settings for the pci * inbound map (PIM). But the bootstrap config choices are limited and * may not be sufficient for a given board. - * - ************************************************************************/ + */ #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller * hose ) { - /*-------------------------------------------------------------------+ + /* * Disable everything - *-------------------------------------------------------------------*/ + */ out_le32((void *)PCIX0_PIM0SA, 0); /* disable */ out_le32((void *)PCIX0_PIM1SA, 0); /* disable */ out_le32((void *)PCIX0_PIM2SA, 0); /* disable */ out_le32((void *)PCIX0_EROMBA, 0); /* disable expansion rom */ - /*-------------------------------------------------------------------+ + /* * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 * strapping options to not support sizes such as 128/256 MB. - *-------------------------------------------------------------------*/ + */ out_le32((void *)PCIX0_PIM0LAL, CFG_SDRAM_BASE); out_le32((void *)PCIX0_PIM0LAH, 0); out_le32((void *)PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1); out_le32((void *)PCIX0_BAR0, 0); - /*-------------------------------------------------------------------+ + /* * Program the board's subsystem id/vendor id - *-------------------------------------------------------------------*/ + */ out_le16((void *)PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID); out_le16((void *)PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID); @@ -265,13 +315,24 @@ void pcie_setup_hoses(int busno) int ret = 0; char *env; unsigned int delay; + int start; /* * assume we're called after the PCIX hose is initialized, which takes * bus ID 0 and therefore start numbering PCIe's from 1. */ bus = busno; - for (i = 0; i <= 1; i++) { + + /* + * Canyonlands with SATA enabled has only one PCIe slot + * (2nd one). + */ + if (gd->board_type == BOARD_CANYONLANDS_SATA) + start = 1; + else + start = 0; + + for (i = start; i <= 1; i++) { if (is_end_point(i)) ret = ppc4xx_init_pcie_endport(i); @@ -369,6 +430,7 @@ int misc_init_r(void) { u32 sdr0_srst1 = 0; u32 eth_cfg; + u32 pvr = get_pvr(); /* * Set EMAC mode/configuration (GMII, SGMII, RGMII...). @@ -382,7 +444,10 @@ int misc_init_r(void) /* Set the for 2 RGMII mode */ /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */ eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL; - eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL; + if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) + eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL; + else + eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL; mtsdr(SDR0_ETH_CFG, eth_cfg); /* @@ -407,7 +472,7 @@ void ft_board_setup(void *blob, bd_t *bd) /* Fixup NOR mapping */ val[0] = 0; /* chip select number */ val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; + val[2] = CFG_FLASH_BASE_PHYS_L; /* we fixed up this address */ val[3] = gd->bd->bi_flashsize; rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", val, sizeof(val), 1); diff --git a/board/amcc/canyonlands/u-boot.lds b/board/amcc/canyonlands/u-boot.lds index 7496f48..3df6ad4 100644 --- a/board/amcc/canyonlands/u-boot.lds +++ b/board/amcc/canyonlands/u-boot.lds @@ -139,8 +139,6 @@ SECTIONS *(COMMON) } - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); - _end = . ; PROVIDE (end = .); } diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile index 359fdab..3961030 100644 --- a/board/atmel/at91cap9adk/Makefile +++ b/board/atmel/at91cap9adk/Makefile @@ -25,10 +25,12 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := at91cap9adk.o led.o nand.o +COBJS-y += at91cap9adk.o +COBJS-y += led.o +COBJS-$(CONFIG_CMD_NAND) += nand.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index 52e62de..24861ba 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -23,7 +23,13 @@ */ #include <common.h> -#include <asm/arch/AT91CAP9.h> +#include <asm/arch/at91cap9.h> +#include <asm/arch/at91cap9_matrix.h> +#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include <net.h> #endif @@ -40,126 +46,106 @@ DECLARE_GLOBAL_DATA_PTR; static void at91cap9_serial_hw_init(void) { #ifdef CONFIG_USART0 - AT91C_BASE_PIOA->PIO_PDR = AT91C_PA22_TXD0 | AT91C_PA23_RXD0; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US0; + at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); #endif #ifdef CONFIG_USART1 - AT91C_BASE_PIOD->PIO_PDR = AT91C_PD0_TXD1 | AT91C_PD1_RXD1; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US1; + at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); #endif #ifdef CONFIG_USART2 - AT91C_BASE_PIOD->PIO_PDR = AT91C_PD2_TXD2 | AT91C_PD3_RXD2; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US2; + at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); #endif #ifdef CONFIG_USART3 /* DBGU */ - AT91C_BASE_PIOC->PIO_PDR = AT91C_PC31_DTXD | AT91C_PC30_DRXD; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SYS; + at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); #endif - - } static void at91cap9_nor_hw_init(void) { - /* Ensure EBI supply is 3.3V */ - AT91C_BASE_CCFG->CCFG_EBICSA |= AT91C_EBI_SUP_3V3; + unsigned long csa; + /* Ensure EBI supply is 3.3V */ + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, + csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); /* Configure SMC CS0 for parallel flash */ - AT91C_BASE_SMC->SMC_SETUP0 = AT91C_FLASH_NWE_SETUP | - AT91C_FLASH_NCS_WR_SETUP | - AT91C_FLASH_NRD_SETUP | - AT91C_FLASH_NCS_RD_SETUP; - - AT91C_BASE_SMC->SMC_PULSE0 = AT91C_FLASH_NWE_PULSE | - AT91C_FLASH_NCS_WR_PULSE | - AT91C_FLASH_NRD_PULSE | - AT91C_FLASH_NCS_RD_PULSE; - - AT91C_BASE_SMC->SMC_CYCLE0 = AT91C_FLASH_NWE_CYCLE | - AT91C_FLASH_NRD_CYCLE; - - AT91C_BASE_SMC->SMC_CTRL0 = AT91C_SMC_READMODE | - AT91C_SMC_WRITEMODE | - AT91C_SMC_NWAITM_NWAIT_DISABLE | - AT91C_SMC_BAT_BYTE_WRITE | - AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | - (AT91C_SMC_TDF & (1 << 16)); + at91_sys_write(AT91_SMC_SETUP(0), + AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) | + AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2)); + at91_sys_write(AT91_SMC_PULSE(0), + AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) | + AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10)); + at91_sys_write(AT91_SMC_CYCLE(0), + AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); + at91_sys_write(AT91_SMC_MODE(0), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | + AT91_SMC_DBW_16 | AT91_SMC_TDF_(1)); } #ifdef CONFIG_CMD_NAND static void at91cap9_nand_hw_init(void) { + unsigned long csa; + /* Enable CS3 */ - AT91C_BASE_CCFG->CCFG_EBICSA |= AT91C_EBI_CS3A_SM | AT91C_EBI_SUP_3V3; + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, + csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | + AT91_MATRIX_EBI_VDDIOMSEL_3_3V); /* Configure SMC CS3 for NAND/SmartMedia */ - AT91C_BASE_SMC->SMC_SETUP3 = AT91C_SM_NWE_SETUP | - AT91C_SM_NCS_WR_SETUP | - AT91C_SM_NRD_SETUP | - AT91C_SM_NCS_RD_SETUP; - - AT91C_BASE_SMC->SMC_PULSE3 = AT91C_SM_NWE_PULSE | - AT91C_SM_NCS_WR_PULSE | - AT91C_SM_NRD_PULSE | - AT91C_SM_NCS_RD_PULSE; - - AT91C_BASE_SMC->SMC_CYCLE3 = AT91C_SM_NWE_CYCLE | - AT91C_SM_NRD_CYCLE; - - AT91C_BASE_SMC->SMC_CTRL3 = AT91C_SMC_READMODE | - AT91C_SMC_WRITEMODE | - AT91C_SMC_NWAITM_NWAIT_DISABLE | - AT91C_SMC_DBW_WIDTH_EIGTH_BITS | - AT91C_SM_TDF; - - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_PIOABCD; + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) | + AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) | + AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8)); + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | + AT91_SMC_DBW_8 | AT91_SMC_TDF_(1)); + + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD); /* RDY/BSY is not connected */ /* Enable NandFlash */ - AT91C_BASE_PIOD->PIO_PER = AT91C_PIO_PD15; - AT91C_BASE_PIOD->PIO_OER = AT91C_PIO_PD15; + at91_set_gpio_output(AT91_PIN_PD15, 1); } #endif #ifdef CONFIG_HAS_DATAFLASH static void at91cap9_spi_hw_init(void) { - AT91C_BASE_PIOD->PIO_BSR = AT91C_PD0_SPI0_NPCS2D | - AT91C_PD1_SPI0_NPCS3D; - AT91C_BASE_PIOD->PIO_PDR = AT91C_PD0_SPI0_NPCS2D | - AT91C_PD1_SPI0_NPCS3D; - - AT91C_BASE_PIOA->PIO_ASR = AT91C_PA28_SPI0_NPCS3A; - AT91C_BASE_PIOA->PIO_BSR = AT91C_PA4_SPI0_NPCS2A | - AT91C_PA1_SPI0_MOSI | - AT91C_PA0_SPI0_MISO | - AT91C_PA3_SPI0_NPCS1 | - AT91C_PA5_SPI0_NPCS0 | - AT91C_PA2_SPI0_SPCK; - AT91C_BASE_PIOA->PIO_PDR = AT91C_PA28_SPI0_NPCS3A | - AT91C_PA4_SPI0_NPCS2A | - AT91C_PA1_SPI0_MOSI | - AT91C_PA0_SPI0_MISO | - AT91C_PA3_SPI0_NPCS1 | - AT91C_PA5_SPI0_NPCS0 | - AT91C_PA2_SPI0_SPCK; - - /* Enable Clock */ - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI0; + at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */ + + at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ + at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ + at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_SPI0); } #endif #ifdef CONFIG_MACB static void at91cap9_macb_hw_init(void) { - unsigned int gpio; - /* Enable clock */ - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_EMAC; + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_EMAC); /* * Disable pull-up on: @@ -169,54 +155,59 @@ static void at91cap9_macb_hw_init(void) * * PHY has internal pull-down */ - AT91C_BASE_PIOB->PIO_PPUDR = AT91C_PB22_E_RXDV | - AT91C_PB25_E_RX0 | - AT91C_PB26_E_RX1; + writel(pin_to_mask(AT91_PIN_PB22) | + pin_to_mask(AT91_PIN_PB25) | + pin_to_mask(AT91_PIN_PB26), + pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); /* Need to reset PHY -> 500ms reset */ - AT91C_BASE_RSTC->RSTC_RMR = (AT91C_RSTC_KEY & (0xA5 << 24)) | - (AT91C_RSTC_ERSTL & (0x0D << 8)) | - AT91C_RSTC_URSTEN; - AT91C_BASE_RSTC->RSTC_RCR = (AT91C_RSTC_KEY & (0xA5 << 24)) | - AT91C_RSTC_EXTRST; + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + AT91_RSTC_ERSTL | (0x0D << 8) | + AT91_RSTC_URSTEN); + + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); /* Wait for end hardware reset */ - while (!(AT91C_BASE_RSTC->RSTC_RSR & AT91C_RSTC_NRSTL)); + while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); /* Re-enable pull-up */ - AT91C_BASE_PIOB->PIO_PPUER = AT91C_PB22_E_RXDV | - AT91C_PB25_E_RX0 | - AT91C_PB26_E_RX1; - -#ifdef CONFIG_RMII - gpio = AT91C_PB30_E_MDIO | - AT91C_PB29_E_MDC | - AT91C_PB21_E_TXCK | - AT91C_PB27_E_RXER | - AT91C_PB25_E_RX0 | - AT91C_PB22_E_RXDV | - AT91C_PB26_E_RX1 | - AT91C_PB28_E_TXEN | - AT91C_PB23_E_TX0 | - AT91C_PB24_E_TX1; - AT91C_BASE_PIOB->PIO_ASR = gpio; - AT91C_BASE_PIOB->PIO_BSR = 0; - AT91C_BASE_PIOB->PIO_PDR = gpio; -#else -#error AT91CAP9A-DK works only in RMII mode + writel(pin_to_mask(AT91_PIN_PB22) | + pin_to_mask(AT91_PIN_PB25) | + pin_to_mask(AT91_PIN_PB26), + pin_to_controller(AT91_PIN_PA0) + PIO_PUER); + + at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */ + at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */ + at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */ + +#ifndef CONFIG_RMII + at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */ + at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ + at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ #endif - /* Unlock EMAC, 3 0 2 1 sequence */ #define MP_MAC_KEY0 0x5969cb2a #define MP_MAC_KEY1 0xb4a1872e #define MP_MAC_KEY2 0x05683fbc #define MP_MAC_KEY3 0x3634fba4 #define UNLOCK_MAC 0x00000008 - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x3c)) = MP_MAC_KEY3; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x30)) = MP_MAC_KEY0; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x38)) = MP_MAC_KEY2; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x34)) = MP_MAC_KEY1; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x40)) = UNLOCK_MAC; + writel(MP_MAC_KEY3, MP_BLOCK_3_BASE + 0x3c); + writel(MP_MAC_KEY0, MP_BLOCK_3_BASE + 0x30); + writel(MP_MAC_KEY2, MP_BLOCK_3_BASE + 0x38); + writel(MP_MAC_KEY1, MP_BLOCK_3_BASE + 0x34); + writel(UNLOCK_MAC, MP_BLOCK_3_BASE + 0x40); } #endif @@ -229,11 +220,11 @@ static void at91cap9_uhp_hw_init(void) #define MP_OHCI_KEY2 0x4823efbc #define MP_OHCI_KEY3 0x8651aae4 #define UNLOCK_OHCI 0x00000010 - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x3c)) = MP_OHCI_KEY3; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x38)) = MP_OHCI_KEY2; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x30)) = MP_OHCI_KEY0; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x34)) = MP_OHCI_KEY1; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x40)) = UNLOCK_OHCI; + writel(MP_OHCI_KEY3, MP_BLOCK_3_BASE + 0x3c); + writel(MP_OHCI_KEY2, MP_BLOCK_3_BASE + 0x38); + writel(MP_OHCI_KEY0, MP_BLOCK_3_BASE + 0x30); + writel(MP_OHCI_KEY1, MP_BLOCK_3_BASE + 0x34); + writel(UNLOCK_OHCI, MP_BLOCK_3_BASE + 0x40); } #endif diff --git a/board/atmel/at91cap9adk/led.c b/board/atmel/at91cap9adk/led.c index 8588a91..04de139 100644 --- a/board/atmel/at91cap9adk/led.c +++ b/board/atmel/at91cap9adk/led.c @@ -23,58 +23,55 @@ */ #include <common.h> -#include <asm/arch/AT91CAP9.h> +#include <asm/arch/at91cap9.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> -#define RED_LED AT91C_PIO_PC29 /* this is the power led */ -#define GREEN_LED AT91C_PIO_PA10 /* this is the user1 led */ -#define YELLOW_LED AT91C_PIO_PA11 /* this is the user1 led */ +#define RED_LED AT91_PIN_PC29 /* this is the power led */ +#define GREEN_LED AT91_PIN_PA10 /* this is the user1 led */ +#define YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */ void red_LED_on(void) { - AT91C_BASE_PIOC->PIO_SODR = RED_LED; + at91_set_gpio_value(RED_LED, 1); } void red_LED_off(void) { - AT91C_BASE_PIOC->PIO_CODR = RED_LED; + at91_set_gpio_value(RED_LED, 0); } void green_LED_on(void) { - AT91C_BASE_PIOA->PIO_CODR = GREEN_LED; + at91_set_gpio_value(GREEN_LED, 0); } void green_LED_off(void) { - AT91C_BASE_PIOA->PIO_SODR = GREEN_LED; + at91_set_gpio_value(GREEN_LED, 1); } void yellow_LED_on(void) { - AT91C_BASE_PIOA->PIO_CODR = YELLOW_LED; + at91_set_gpio_value(YELLOW_LED, 0); } void yellow_LED_off(void) { - AT91C_BASE_PIOA->PIO_SODR = YELLOW_LED; + at91_set_gpio_value(YELLOW_LED, 1); } void coloured_LED_init(void) { /* Enable clock */ - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_PIOABCD; + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD); - /* Disable peripherals on LEDs */ - AT91C_BASE_PIOA->PIO_PER = GREEN_LED | YELLOW_LED; - /* Enable pins as outputs */ - AT91C_BASE_PIOA->PIO_OER = GREEN_LED | YELLOW_LED; - /* Turn all LEDs OFF */ - AT91C_BASE_PIOA->PIO_SODR = GREEN_LED | YELLOW_LED; + at91_set_gpio_output(RED_LED, 1); + at91_set_gpio_output(GREEN_LED, 1); + at91_set_gpio_output(YELLOW_LED, 1); - /* Disable peripherals on LEDs */ - AT91C_BASE_PIOC->PIO_PER = RED_LED; - /* Enable pins as outputs */ - AT91C_BASE_PIOC->PIO_OER = RED_LED; - /* Turn all LEDs OFF */ - AT91C_BASE_PIOC->PIO_CODR = RED_LED; + at91_set_gpio_output(RED_LED, 0); + at91_set_gpio_output(GREEN_LED, 1); + at91_set_gpio_output(YELLOW_LED, 1); } diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c index 2f02126..c72b024 100644 --- a/board/atmel/at91cap9adk/nand.c +++ b/board/atmel/at91cap9adk/nand.c @@ -25,9 +25,9 @@ */ #include <common.h> -#include <asm/arch/hardware.h> - -#ifdef CONFIG_CMD_NAND +#include <asm/arch/at91cap9.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91_pio.h> #include <nand.h> @@ -51,10 +51,10 @@ static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd, int cmd) IO_ADDR_W |= MASK_ALE; break; case NAND_CTL_CLRNCE: - AT91C_BASE_PIOD->PIO_SODR = AT91C_PIO_PD15; + at91_set_gpio_value(AT91_PIN_PD15, 1); break; case NAND_CTL_SETNCE: - AT91C_BASE_PIOD->PIO_CODR = AT91C_PIO_PD15; + at91_set_gpio_value(AT91_PIN_PD15, 0); break; } this->IO_ADDR_W = (void *) IO_ADDR_W; @@ -68,4 +68,3 @@ int board_nand_init(struct nand_chip *nand) return 0; } -#endif diff --git a/cpu/bf561/Makefile b/board/atmel/at91sam9260ek/Makefile index 418a437..8a629b9 100644 --- a/cpu/bf561/Makefile +++ b/board/atmel/at91sam9260ek/Makefile @@ -1,9 +1,6 @@ -# U-boot - Makefile # -# Copyright (c) 2005-2007 Analog Devices Inc. -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd <at> denx.de. # # See file CREDITS for list of people who contributed to this # project. @@ -15,32 +12,35 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA # include $(TOPDIR)/config.mk -LIB = $(obj)lib$(CPU).a +LIB = $(obj)lib$(BOARD).a -SOBJS = start.o start1.o interrupt.o cache.o flush.o init_sdram.o -COBJS = cpu.o traps.o ints.o serial.o interrupts.o video.o +COBJS-y += at91sam9260ek.o +COBJS-y += led.o +COBJS-$(CONFIG_CMD_NAND) += nand.o -EXTRA = init_sdram_bootrom_initblock.o +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) -START := $(addprefix $(obj),$(START)) +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -all: $(obj).depend $(START) $(LIB) $(obj).depend $(EXTRA) +clean: + rm -f $(SOBJS) $(OBJS) -$(LIB): $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) +distclean: clean + rm -f $(LIB) core *.bak .depend ######################################################################### diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c new file mode 100644 index 0000000..a55468e --- /dev/null +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -0,0 +1,236 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop <at> leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9260.h> +#include <asm/arch/at91sam9260_matrix.h> +#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) +#include <net.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +static void at91sam9260ek_serial_hw_init(void) +{ +#ifdef CONFIG_USART0 + at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); +#endif + +#ifdef CONFIG_USART1 + at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); +#endif + +#ifdef CONFIG_USART2 + at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); +#endif + +#ifdef CONFIG_USART3 /* DBGU */ + at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); +#endif +} + +#ifdef CONFIG_CMD_NAND +static void at91sam9260ek_nand_hw_init(void) +{ + unsigned long csa; + + /* Enable CS3 */ + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, + csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + + /* Configure SMC CS3 for NAND/SmartMedia */ + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | + AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | + AT91_SMC_DBW_8 | AT91_SMC_TDF_(2)); + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); + + /* Configure RDY/BSY */ + at91_set_gpio_input(AT91_PIN_PC13, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(AT91_PIN_PC14, 1); +} +#endif + +#ifdef CONFIG_HAS_DATAFLASH +static void at91sam9260ek_spi_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */ + at91_set_B_periph(AT91_PIN_PC11, 0); /* SPI0_NPCS1 */ + + at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ + at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ + at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0); +} +#endif + +#ifdef CONFIG_MACB +static void at91sam9260ek_macb_hw_init(void) +{ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC); + + /* + * Disable pull-up on: + * RXDV (PA17) => PHY normal mode (not Test mode) + * ERX0 (PA14) => PHY ADDR0 + * ERX1 (PA15) => PHY ADDR1 + * ERX2 (PA25) => PHY ADDR2 + * ERX3 (PA26) => PHY ADDR3 + * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 + * + * PHY has internal pull-down + */ + writel(pin_to_mask(AT91_PIN_PA14) | + pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA17) | + pin_to_mask(AT91_PIN_PA25) | + pin_to_mask(AT91_PIN_PA26) | + pin_to_mask(AT91_PIN_PA28), + pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); + + /* Need to reset PHY -> 500ms reset */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + AT91_RSTC_ERSTL | (0x0D << 8) | + AT91_RSTC_URSTEN); + + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); + + /* Wait for end hardware reset */ + while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); + + /* Restore NRST value */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + AT91_RSTC_ERSTL | (0x0 << 8) | + AT91_RSTC_URSTEN); + + /* Re-enable pull-up */ + writel(pin_to_mask(AT91_PIN_PA14) | + pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA17) | + pin_to_mask(AT91_PIN_PA25) | + pin_to_mask(AT91_PIN_PA26) | + pin_to_mask(AT91_PIN_PA28), + pin_to_controller(AT91_PIN_PA0) + PIO_PUER); + + at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */ + at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ + at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */ + +#ifndef CONFIG_RMII + at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */ + at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ + at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ +#endif + +} +#endif + +int board_init(void) +{ + /* Enable Ctrlc */ + console_init_f(); + + /* arch number of AT91SAM9260EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK; + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + at91sam9260ek_serial_hw_init(); +#ifdef CONFIG_CMD_NAND + at91sam9260ek_nand_hw_init(); +#endif +#ifdef CONFIG_HAS_DATAFLASH + at91sam9260ek_spi_hw_init(); +#endif +#ifdef CONFIG_MACB + at91sam9260ek_macb_hw_init(); +#endif + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +void reset_phy(void) +{ +#ifdef CONFIG_MACB + /* + * Initialize ethernet HW addr prior to starting Linux, + * needed for nfsroot + */ + eth_init(gd->bd); +#endif +} +#endif diff --git a/board/atmel/at91sam9260ek/config.mk b/board/atmel/at91sam9260ek/config.mk new file mode 100644 index 0000000..ff2cfd1 --- /dev/null +++ b/board/atmel/at91sam9260ek/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x23f00000 diff --git a/board/atmel/at91sam9260ek/led.c b/board/atmel/at91sam9260ek/led.c new file mode 100644 index 0000000..4c53742 --- /dev/null +++ b/board/atmel/at91sam9260ek/led.c @@ -0,0 +1,64 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop <at> leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9260.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> + +#define RED_LED AT91_PIN_PA9 /* this is the power led */ +#define GREEN_LED AT91_PIN_PA6 /* this is the user led */ + +void red_LED_on(void) +{ + at91_set_gpio_value(RED_LED, 1); +} + +void red_LED_off(void) +{ + at91_set_gpio_value(RED_LED, 0); +} + +void green_LED_on(void) +{ + at91_set_gpio_value(GREEN_LED, 0); +} + +void green_LED_off(void) +{ + at91_set_gpio_value(GREEN_LED, 1); +} + +void coloured_LED_init(void) +{ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA); + + at91_set_gpio_output(RED_LED, 1); + at91_set_gpio_output(GREEN_LED, 1); + + at91_set_gpio_value(RED_LED, 0); + at91_set_gpio_value(GREEN_LED, 1); +} diff --git a/board/atmel/at91sam9260ek/nand.c b/board/atmel/at91sam9260ek/nand.c new file mode 100644 index 0000000..abb788a --- /dev/null +++ b/board/atmel/at91sam9260ek/nand.c @@ -0,0 +1,76 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop <at> leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9260.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91_pio.h> + +#include <nand.h> + +/* + * hardware specific access to control-lines + */ +#define MASK_ALE (1 << 21) /* our ALE is AD21 */ +#define MASK_CLE (1 << 22) /* our CLE is AD22 */ + +static void at91sam9260ek_nand_hwcontrol(struct mtd_info *mtd, int cmd) +{ + struct nand_chip *this = mtd->priv; + ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; + + IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); + switch (cmd) { + case NAND_CTL_SETCLE: + IO_ADDR_W |= MASK_CLE; + break; + case NAND_CTL_SETALE: + IO_ADDR_W |= MASK_ALE; + break; + case NAND_CTL_CLRNCE: + at91_set_gpio_value(AT91_PIN_PC14, 1); + break; + case NAND_CTL_SETNCE: + at91_set_gpio_value(AT91_PIN_PC14, 0); + break; + } + this->IO_ADDR_W = (void *) IO_ADDR_W; +} + +static int at91sam9260ek_nand_ready(struct mtd_info *mtd) +{ + return at91_get_gpio_value(AT91_PIN_PC13); +} + +int board_nand_init(struct nand_chip *nand) +{ + nand->eccmode = NAND_ECC_SOFT; + nand->hwcontrol = at91sam9260ek_nand_hwcontrol; + nand->dev_ready = at91sam9260ek_nand_ready; + nand->chip_delay = 20; + + return 0; +} diff --git a/board/atmel/at91sam9260ek/u-boot.lds b/board/atmel/at91sam9260ek/u-boot.lds new file mode 100644 index 0000000..05a6d83 --- /dev/null +++ b/board/atmel/at91sam9260ek/u-boot.lds @@ -0,0 +1,57 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj <at> denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm926ejs/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/bf533-ezkit/Makefile b/board/bf533-ezkit/Makefile index e55c1a7..6688095 100644 --- a/board/bf533-ezkit/Makefile +++ b/board/bf533-ezkit/Makefile @@ -39,7 +39,7 @@ $(LIB): $(obj).depend $(OBJS) $(SOBJS) u-boot.lds $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) u-boot.lds: u-boot.lds.S - $(CPP) $(CPPFLAGS) -P -Ubfin $^ > $@.tmp + $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp mv -f $@.tmp $@ clean: diff --git a/board/bf533-ezkit/config.mk b/board/bf533-ezkit/config.mk index f39be5f..de80ffe 100644 --- a/board/bf533-ezkit/config.mk +++ b/board/bf533-ezkit/config.mk @@ -20,6 +20,6 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -# TEXT_BASE should be defined as the MAX_SDRAM Address - 256k bytes -# 256k is defined as CFG_MONITOR_LEN in ./include/configs/<board>.h -TEXT_BASE = 0x01FC0000 + +# This is not actually used for Blackfin boards so do not change it +#TEXT_BASE = do-not-use-me diff --git a/board/bf533-ezkit/u-boot.lds.S b/board/bf533-ezkit/u-boot.lds.S index 9742e02..e4b83d1 100644 --- a/board/bf533-ezkit/u-boot.lds.S +++ b/board/bf533-ezkit/u-boot.lds.S @@ -1,7 +1,7 @@ /* * U-boot - u-boot.lds.S * - * Copyright (c) 2005-2007 Analog Device Inc. + * Copyright (c) 2005-2008 Analog Device Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -26,127 +26,113 @@ */ #include <config.h> +#include <asm/blackfin.h> +#undef ALIGN + +/* If we don't actually load anything into L1 data, this will avoid + * a syntax error. If we do actually load something into L1 data, + * we'll get a linker memory load error (which is what we'd want). + * This is here in the first place so we can quickly test building + * for different CPU's which may lack non-cache L1 data. + */ +#ifndef L1_DATA_B_SRAM +# define L1_DATA_B_SRAM CFG_MONITOR_BASE +# define L1_DATA_B_SRAM_SIZE 0 +#endif OUTPUT_ARCH(bfin) -SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS + +/* The 0xC offset is so we don't clobber the tiny LDR jump block. */ +MEMORY { - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - . = CFG_MONITOR_BASE; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector before the environment sector. If it throws */ - /* an error during compilation remove an object here to get */ - /* it linked after the configuration sector. */ + ram : ORIGIN = CFG_MONITOR_BASE, LENGTH = CFG_MONITOR_LEN + l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE + l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE +} - cpu/bf533/start.o (.text) - cpu/bf533/start1.o (.text) - cpu/bf533/traps.o (.text) - cpu/bf533/interrupt.o (.text) - cpu/bf533/serial.o (.text) - common/dlmalloc.o (.text) -/* lib_blackfin/bf533_string.o (.text) */ -/* lib_generic/vsprintf.o (.text) */ - lib_generic/crc32.o (.text) - lib_generic/zlib.o (.text) - board/bf533-ezkit/bf533-ezkit.o (.text) +SECTIONS +{ + .text : + { +#ifdef ENV_IS_EMBEDDED + /* WARNING - the following is hand-optimized to fit within + * the sector before the environment sector. If it throws + * an error during compilation remove an object here to get + * it linked after the configuration sector. + */ - . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + cpu/blackfin/start.o (.text) + cpu/blackfin/traps.o (.text) + cpu/blackfin/interrupt.o (.text) + cpu/blackfin/serial.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_generic/zlib.o (.text) + board/bf533-ezkit/bf533-ezkit.o (.text) - *(.text) - *(.fixup) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) +#endif - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; + *(.text .text.*) + } >ram - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); + .rodata : + { + . = ALIGN(4); + *(.rodata .rodata.*) + *(.rodata1) + *(.eh_frame) + . = ALIGN(4); + } >ram - ___u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - ___u_boot_cmd_end = .; + .data : + { + . = ALIGN(256); + *(.data .data.*) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } >ram + .u_boot_cmd : + { + ___u_boot_cmd_start = .; + *(.u_boot_cmd) + ___u_boot_cmd_end = .; + } >ram - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; + .text_l1 : + { + . = ALIGN(4); + __stext_l1 = .; + *(.l1.text) + . = ALIGN(4); + __etext_l1 = .; + } >l1_code AT>ram + __stext_l1_lma = LOADADDR(.text_l1); - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; + .data_l1 : + { + . = ALIGN(4); + __sdata_l1 = .; + *(.l1.data) + *(.l1.bss) + . = ALIGN(4); + __edata_l1 = .; + } >l1_data AT>ram + __sdata_l1_lma = LOADADDR(.data_l1); - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - _end = . ; - PROVIDE (end = .); + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss .bss.*) + *(COMMON) + __bss_end = .; + } >ram } diff --git a/board/bf533-stamp/Makefile b/board/bf533-stamp/Makefile index 02c941b..1115df8 100644 --- a/board/bf533-stamp/Makefile +++ b/board/bf533-stamp/Makefile @@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o spi.o +COBJS := $(BOARD).o spi_flash.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) @@ -39,7 +39,7 @@ $(LIB): $(obj).depend $(OBJS) $(SOBJS) u-boot.lds $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) u-boot.lds: u-boot.lds.S - $(CPP) $(CPPFLAGS) -P -Ubfin $^ > $@.tmp + $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp mv -f $@.tmp $@ clean: diff --git a/board/bf533-stamp/config.mk b/board/bf533-stamp/config.mk index 113438b..de80ffe 100644 --- a/board/bf533-stamp/config.mk +++ b/board/bf533-stamp/config.mk @@ -20,6 +20,6 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -# TEXT_BASE should be defined as the MAX_SDRAM Address - 256k bytes -# 256k is defined as CFG_MONITOR_LEN in ./include/configs/<board>.h -TEXT_BASE = 0x07FC0000 + +# This is not actually used for Blackfin boards so do not change it +#TEXT_BASE = do-not-use-me diff --git a/board/bf533-stamp/spi.c b/board/bf533-stamp/spi.c deleted file mode 100644 index 15141cf..0000000 --- a/board/bf533-stamp/spi.c +++ /dev/null @@ -1,474 +0,0 @@ -/**************************************************************************** - * SPI flash driver for M25P64 - ****************************************************************************/ -#include <common.h> -#include <linux/ctype.h> -#include <asm/io.h> -#include <asm/mach-common/bits/spi.h> - -#if defined(CONFIG_SPI) - - /*Application definitions */ - -#define NUM_SECTORS 128 /* number of sectors */ -#define SECTOR_SIZE 0x10000 -#define NOP_NUM 1000 - -#define COMMON_SPI_SETTINGS (SPE|MSTR|CPHA|CPOL) /*Settings to the SPI_CTL */ -#define TIMOD01 (0x01) /*stes the SPI to work with core instructions */ - - /*Flash commands */ -#define SPI_WREN (0x06) /*Set Write Enable Latch */ -#define SPI_WRDI (0x04) /*Reset Write Enable Latch */ -#define SPI_RDSR (0x05) /*Read Status Register */ -#define SPI_WRSR (0x01) /*Write Status Register */ -#define SPI_READ (0x03) /*Read data from memory */ -#define SPI_PP (0x02) /*Program Data into memory */ -#define SPI_SE (0xD8) /*Erase one sector in memory */ -#define SPI_BE (0xC7) /*Erase all memory */ -#define WIP (0x1) /*Check the write in progress bit of the SPI status register */ -#define WEL (0x2) /*Check the write enable bit of the SPI status register */ - -#define TIMEOUT 350000000 - -typedef enum { - NO_ERR, - POLL_TIMEOUT, - INVALID_SECTOR, - INVALID_BLOCK, -} ERROR_CODE; - -void spi_init_f(void); -void spi_init_r(void); -ssize_t spi_read(uchar *, int, uchar *, int); -ssize_t spi_write(uchar *, int, uchar *, int); - -char ReadStatusRegister(void); -void Wait_For_SPIF(void); -void SetupSPI(const int spi_setting); -void SPI_OFF(void); -void SendSingleCommand(const int iCommand); - -ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector); -ERROR_CODE EraseBlock(int nBlock); -ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData); -ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData); -ERROR_CODE Wait_For_Status(char Statusbit); -ERROR_CODE Wait_For_WEL(void); - -/* ------------------- - * Variables - * ------------------- */ - -/* ************************************************************************** - * - * Function: spi_init_f - * - * Description: Init SPI-Controller (ROM part) - * - * return: --- - * - * *********************************************************************** */ -void spi_init_f(void) -{ -} - -/* ************************************************************************** - * - * Function: spi_init_r - * - * Description: Init SPI-Controller (RAM part) - - * The malloc engine is ready and we can move our buffers to - * normal RAM - * - * return: --- - * - * *********************************************************************** */ -void spi_init_r(void) -{ - return; -} - -/**************************************************************************** - * Function: spi_write - **************************************************************************** */ -ssize_t spi_write(uchar * addr, int alen, uchar * buffer, int len) -{ - unsigned long offset; - int start_block, end_block; - int start_byte, end_byte; - ERROR_CODE result = NO_ERR; - uchar temp[SECTOR_SIZE]; - int i, num; - - offset = addr[0] << 16 | addr[1] << 8 | addr[2]; - /* Get the start block number */ - result = GetSectorNumber(offset, &start_block); - if (result == INVALID_SECTOR) { - printf("Invalid sector! "); - return 0; - } - /* Get the end block number */ - result = GetSectorNumber(offset + len - 1, &end_block); - if (result == INVALID_SECTOR) { - printf("Invalid sector! "); - return 0; - } - - for (num = start_block; num <= end_block; num++) { - ReadData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp); - start_byte = num * SECTOR_SIZE; - end_byte = (num + 1) * SECTOR_SIZE - 1; - if (start_byte < offset) - start_byte = offset; - if (end_byte > (offset + len)) - end_byte = (offset + len - 1); - for (i = start_byte; i <= end_byte; i++) - temp[i - num * SECTOR_SIZE] = buffer[i - offset]; - EraseBlock(num); - result = WriteData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp); - if (result != NO_ERR) - return 0; - printf("."); - } - return len; -} - -/**************************************************************************** - * Function: spi_read - **************************************************************************** */ -ssize_t spi_read(uchar * addr, int alen, uchar * buffer, int len) -{ - unsigned long offset; - offset = addr[0] << 16 | addr[1] << 8 | addr[2]; - ReadData(offset, len, (int *)buffer); - return len; -} - -void SendSingleCommand(const int iCommand) -{ - unsigned short dummy; - - /*turns on the SPI in single write mode */ - SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); - - /*sends the actual command to the SPI TX register */ - *pSPI_TDBR = iCommand; - SSYNC(); - - /*The SPI status register will be polled to check the SPIF bit */ - Wait_For_SPIF(); - - dummy = *pSPI_RDBR; - - /*The SPI will be turned off */ - SPI_OFF(); - -} - -void SetupSPI(const int spi_setting) -{ - - if (icache_status() || dcache_status()) - udelay(CONFIG_CCLK_HZ / 50000000); - /*sets up the PF2 to be the slave select of the SPI */ - *pSPI_FLG = 0xFB04; - *pSPI_BAUD = CONFIG_SPI_BAUD; - *pSPI_CTL = spi_setting; - SSYNC(); -} - -void SPI_OFF(void) -{ - - *pSPI_CTL = 0x0400; /* disable SPI */ - *pSPI_FLG = 0; - *pSPI_BAUD = 0; - SSYNC(); - udelay(CONFIG_CCLK_HZ / 50000000); - -} - -void Wait_For_SPIF(void) -{ - unsigned short dummyread; - while ((*pSPI_STAT & TXS)) ; - while (!(*pSPI_STAT & SPIF)) ; - while (!(*pSPI_STAT & RXS)) ; - dummyread = *pSPI_RDBR; /* Read dummy to empty the receive register */ - -} - -ERROR_CODE Wait_For_WEL(void) -{ - int i; - char status_register = 0; - ERROR_CODE ErrorCode = NO_ERR; /* tells us if there was an error erasing flash */ - - for (i = 0; i < TIMEOUT; i++) { - status_register = ReadStatusRegister(); - if ((status_register & WEL)) { - ErrorCode = NO_ERR; /* tells us if there was an error erasing flash */ - break; - } - ErrorCode = POLL_TIMEOUT; /* Time out error */ - }; - - return ErrorCode; -} - -ERROR_CODE Wait_For_Status(char Statusbit) -{ - int i; - char status_register = 0xFF; - ERROR_CODE ErrorCode = NO_ERR; /* tells us if there was an error erasing flash */ - - for (i = 0; i < TIMEOUT; i++) { - status_register = ReadStatusRegister(); - if (!(status_register & Statusbit)) { - ErrorCode = NO_ERR; /* tells us if there was an error erasing flash */ - break; - } - ErrorCode = POLL_TIMEOUT; /* Time out error */ - }; - - return ErrorCode; -} - -char ReadStatusRegister(void) -{ - char status_register = 0; - - SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); /* Turn on the SPI */ - - *pSPI_TDBR = SPI_RDSR; /* send instruction to read status register */ - SSYNC(); - Wait_For_SPIF(); /*wait until the instruction has been sent */ - *pSPI_TDBR = 0; /*send dummy to receive the status register */ - SSYNC(); - Wait_For_SPIF(); /*wait until the data has been sent */ - status_register = *pSPI_RDBR; /*read the status register */ - - SPI_OFF(); /* Turn off the SPI */ - - return status_register; -} - -ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector) -{ - int nSector = 0; - ERROR_CODE ErrorCode = NO_ERR; - - if (ulOffset > (NUM_SECTORS * 0x10000 - 1)) { - ErrorCode = INVALID_SECTOR; - return ErrorCode; - } - - nSector = (int)ulOffset / 0x10000; - *pnSector = nSector; - - /* ok */ - return ErrorCode; -} - -ERROR_CODE EraseBlock(int nBlock) -{ - unsigned long ulSectorOff = 0x0, ShiftValue; - ERROR_CODE ErrorCode = NO_ERR; - - /* if the block is invalid just return */ - if ((nBlock < 0) || (nBlock > NUM_SECTORS)) { - ErrorCode = INVALID_BLOCK; /* tells us if there was an error erasing flash */ - return ErrorCode; - } - /* figure out the offset of the block in flash */ - if ((nBlock >= 0) && (nBlock < NUM_SECTORS)) { - ulSectorOff = (nBlock * SECTOR_SIZE); - - } else { - ErrorCode = INVALID_BLOCK; /* tells us if there was an error erasing flash */ - return ErrorCode; - } - - /* A write enable instruction must previously have been executed */ - SendSingleCommand(SPI_WREN); - - /*The status register will be polled to check the write enable latch "WREN" */ - ErrorCode = Wait_For_WEL(); - - if (POLL_TIMEOUT == ErrorCode) { - printf("SPI Erase block error\n"); - return ErrorCode; - } else - /*Turn on the SPI to send single commands */ - SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); - - /* Send the erase block command to the flash followed by the 24 address */ - /* to point to the start of a sector. */ - *pSPI_TDBR = SPI_SE; - SSYNC(); - Wait_For_SPIF(); - ShiftValue = (ulSectorOff >> 16); /* Send the highest byte of the 24 bit address at first */ - *pSPI_TDBR = ShiftValue; - SSYNC(); - Wait_For_SPIF(); /* Wait until the instruction has been sent */ - ShiftValue = (ulSectorOff >> 8); /* Send the middle byte of the 24 bit address at second */ - *pSPI_TDBR = ShiftValue; - SSYNC(); - Wait_For_SPIF(); /* Wait until the instruction has been sent */ - *pSPI_TDBR = ulSectorOff; /* Send the lowest byte of the 24 bit address finally */ - SSYNC(); - Wait_For_SPIF(); /* Wait until the instruction has been sent */ - - /*Turns off the SPI */ - SPI_OFF(); - - /* Poll the status register to check the Write in Progress bit */ - /* Sector erase takes time */ - ErrorCode = Wait_For_Status(WIP); - - /* block erase should be complete */ - return ErrorCode; -} - -/***************************************************************************** -* ERROR_CODE ReadData() -* -* Read a value from flash for verify purpose -* -* Inputs: unsigned long ulStart - holds the SPI start address -* int pnData - pointer to store value read from flash -* long lCount - number of elements to read -***************************************************************************** */ -ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData) -{ - unsigned long ShiftValue; - char *cnData; - int i; - - cnData = (char *)pnData; /* Pointer cast to be able to increment byte wise */ - - /* Start SPI interface */ - SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); - - *pSPI_TDBR = SPI_READ; /* Send the read command to SPI device */ - SSYNC(); - Wait_For_SPIF(); /* Wait until the instruction has been sent */ - ShiftValue = (ulStart >> 16); /* Send the highest byte of the 24 bit address at first */ - *pSPI_TDBR = ShiftValue; /* Send the byte to the SPI device */ - SSYNC(); - Wait_For_SPIF(); /* Wait until the instruction has been sent */ - ShiftValue = (ulStart >> 8); /* Send the middle byte of the 24 bit address at second */ - *pSPI_TDBR = ShiftValue; /* Send the byte to the SPI device */ - SSYNC(); - Wait_For_SPIF(); /* Wait until the instruction has been sent */ - *pSPI_TDBR = ulStart; /* Send the lowest byte of the 24 bit address finally */ - SSYNC(); - Wait_For_SPIF(); /* Wait until the instruction has been sent */ - - /* After the SPI device address has been placed on the MOSI pin the data can be */ - /* received on the MISO pin. */ - for (i = 0; i < lCount; i++) { - *pSPI_TDBR = 0; /*send dummy */ - SSYNC(); - while (!(*pSPI_STAT & RXS)) ; - *cnData++ = *pSPI_RDBR; /*read */ - - if ((i >= SECTOR_SIZE) && (i % SECTOR_SIZE == 0)) - printf("."); - } - - SPI_OFF(); /* Turn off the SPI */ - - return NO_ERR; -} - -ERROR_CODE WriteFlash(unsigned long ulStartAddr, long lTransferCount, - int *iDataSource, long *lWriteCount) -{ - - unsigned long ulWAddr; - long lWTransferCount = 0; - int i; - char iData; - char *temp = (char *)iDataSource; - ERROR_CODE ErrorCode = NO_ERR; /* tells us if there was an error erasing flash */ - - /* First, a Write Enable Command must be sent to the SPI. */ - SendSingleCommand(SPI_WREN); - - /* Second, the SPI Status Register will be tested whether the */ - /* Write Enable Bit has been set. */ - ErrorCode = Wait_For_WEL(); - if (POLL_TIMEOUT == ErrorCode) { - printf("SPI Write Time Out\n"); - return ErrorCode; - } else - /* Third, the 24 bit address will be shifted out the SPI MOSI bytewise. */ - SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); /* Turns the SPI on */ - *pSPI_TDBR = SPI_PP; - SSYNC(); - Wait_For_SPIF(); /*wait until the instruction has been sent */ - ulWAddr = (ulStartAddr >> 16); - *pSPI_TDBR = ulWAddr; - SSYNC(); - Wait_For_SPIF(); /*wait until the instruction has been sent */ - ulWAddr = (ulStartAddr >> 8); - *pSPI_TDBR = ulWAddr; - SSYNC(); - Wait_For_SPIF(); /*wait until the instruction has been sent */ - ulWAddr = ulStartAddr; - *pSPI_TDBR = ulWAddr; - SSYNC(); - Wait_For_SPIF(); /*wait until the instruction has been sent */ - /* Fourth, maximum number of 256 bytes will be taken from the Buffer */ - /* and sent to the SPI device. */ - for (i = 0; (i < lTransferCount) && (i < 256); i++, lWTransferCount++) { - iData = *temp; - *pSPI_TDBR = iData; - SSYNC(); - Wait_For_SPIF(); /*wait until the instruction has been sent */ - temp++; - } - - SPI_OFF(); /* Turns the SPI off */ - - /* Sixth, the SPI Write in Progress Bit must be toggled to ensure the */ - /* programming is done before start of next transfer. */ - ErrorCode = Wait_For_Status(WIP); - - if (POLL_TIMEOUT == ErrorCode) { - printf("SPI Program Time out!\n"); - return ErrorCode; - } else - - *lWriteCount = lWTransferCount; - - return ErrorCode; -} - -ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData) -{ - - unsigned long ulWStart = ulStart; - long lWCount = lCount, lWriteCount; - long *pnWriteCount = &lWriteCount; - - ERROR_CODE ErrorCode = NO_ERR; - - while (lWCount != 0) { - ErrorCode = WriteFlash(ulWStart, lWCount, pnData, pnWriteCount); - - /* After each function call of WriteFlash the counter must be adjusted */ - lWCount -= *pnWriteCount; - - /* Also, both address pointers must be recalculated. */ - ulWStart += *pnWriteCount; - pnData += *pnWriteCount / 4; - } - - /* return the appropriate error code */ - return ErrorCode; -} - -#endif /* CONFIG_SPI */ diff --git a/board/bf533-stamp/spi_flash.c b/board/bf533-stamp/spi_flash.c new file mode 100644 index 0000000..8784741 --- /dev/null +++ b/board/bf533-stamp/spi_flash.c @@ -0,0 +1,2 @@ +/* Share the spi flash code */ +#include "../bf537-stamp/spi_flash.c" diff --git a/board/bf533-stamp/u-boot.lds.S b/board/bf533-stamp/u-boot.lds.S index 03ef72b..01780c5 100644 --- a/board/bf533-stamp/u-boot.lds.S +++ b/board/bf533-stamp/u-boot.lds.S @@ -1,7 +1,7 @@ /* * U-boot - u-boot.lds.S * - * Copyright (c) 2005-2007 Analog Device Inc. + * Copyright (c) 2005-2008 Analog Device Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -26,127 +26,111 @@ */ #include <config.h> +#include <asm/blackfin.h> +#undef ALIGN + +/* If we don't actually load anything into L1 data, this will avoid + * a syntax error. If we do actually load something into L1 data, + * we'll get a linker memory load error (which is what we'd want). + * This is here in the first place so we can quickly test building + * for different CPU's which may lack non-cache L1 data. + */ +#ifndef L1_DATA_B_SRAM +# define L1_DATA_B_SRAM CFG_MONITOR_BASE +# define L1_DATA_B_SRAM_SIZE 0 +#endif OUTPUT_ARCH(bfin) -SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS + +/* The 0xC offset is so we don't clobber the tiny LDR jump block. */ +MEMORY { - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - . = CFG_MONITOR_BASE; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector before the environment sector. If it throws */ - /* an error during compilation remove an object here to get */ - /* it linked after the configuration sector. */ + ram : ORIGIN = CFG_MONITOR_BASE, LENGTH = CFG_MONITOR_LEN + l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE + l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE +} - cpu/bf533/start.o (.text) - cpu/bf533/start1.o (.text) - cpu/bf533/traps.o (.text) - cpu/bf533/interrupt.o (.text) - cpu/bf533/serial.o (.text) - common/dlmalloc.o (.text) -/* lib_blackfin/bf533_string.o (.text) */ -/* lib_generic/vsprintf.o (.text) */ - lib_generic/crc32.o (.text) -/* lib_generic/zlib.o (.text) */ -/* board/stamp/stamp.o (.text) */ +SECTIONS +{ + .text : + { +#ifdef ENV_IS_EMBEDDED + /* WARNING - the following is hand-optimized to fit within + * the sector before the environment sector. If it throws + * an error during compilation remove an object here to get + * it linked after the configuration sector. + */ - . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + cpu/blackfin/start.o (.text) + cpu/blackfin/traps.o (.text) + cpu/blackfin/interrupt.o (.text) + cpu/blackfin/serial.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) - *(.text) - *(.fixup) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) +#endif - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; + *(.text .text.*) + } >ram - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); + .rodata : + { + . = ALIGN(4); + *(.rodata .rodata.*) + *(.rodata1) + *(.eh_frame) + . = ALIGN(4); + } >ram - ___u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - ___u_boot_cmd_end = .; + .data : + { + . = ALIGN(256); + *(.data .data.*) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } >ram + .u_boot_cmd : + { + ___u_boot_cmd_start = .; + *(.u_boot_cmd) + ___u_boot_cmd_end = .; + } >ram - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; + .text_l1 : + { + . = ALIGN(4); + __stext_l1 = .; + *(.l1.text) + . = ALIGN(4); + __etext_l1 = .; + } >l1_code AT>ram + __stext_l1_lma = LOADADDR(.text_l1); - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; + .data_l1 : + { + . = ALIGN(4); + __sdata_l1 = .; + *(.l1.data) + *(.l1.bss) + . = ALIGN(4); + __edata_l1 = .; + } >l1_data AT>ram + __sdata_l1_lma = LOADADDR(.data_l1); - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - _end = . ; - PROVIDE (end = .); + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss .bss.*) + *(COMMON) + __bss_end = .; + } >ram } diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile index 5d22393..ea8c436 100644 --- a/board/bf537-stamp/Makefile +++ b/board/bf537-stamp/Makefile @@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o post-memory.o stm_m25p64.o cmd_bf537led.o nand.o +COBJS := $(BOARD).o post-memory.o spi_flash.o cmd_bf537led.o nand.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) @@ -39,7 +39,7 @@ $(LIB): $(obj).depend $(OBJS) $(SOBJS) u-boot.lds $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) u-boot.lds: u-boot.lds.S - $(CPP) $(CPPFLAGS) -P -Ubfin $^ > $@.tmp + $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp mv -f $@.tmp $@ clean: diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c index 6ca8e21..e714177 100644 --- a/board/bf537-stamp/bf537-stamp.c +++ b/board/bf537-stamp/bf537-stamp.c @@ -120,12 +120,10 @@ long int initdram(int board_type) /* miscellaneous platform dependent initialisations */ int misc_init_r(void) { -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) +#if defined(CONFIG_CMD_NET) char nid[32]; unsigned char *pMACaddr = (unsigned char *)0x203F0000; - u8 SrcAddr[6] = { 0x02, 0x80, 0xAD, 0x20, 0x31, 0xB8 }; -#if defined(CONFIG_CMD_NET) /* The 0xFF check here is to make sure we don't use the address * in flash if it's simply been erased (aka all 0xFF values) */ if (getenv("ethaddr") == NULL && is_valid_ether_addr(pMACaddr)) { @@ -135,7 +133,6 @@ int misc_init_r(void) setenv("ethaddr", nid); } #endif -#endif /* BFIN_BOOT_MODE == BF537_BYPASS_BOOT */ #if defined(CONFIG_BFIN_IDE) #if defined(CONFIG_BFIN_TRUE_IDE) @@ -158,13 +155,6 @@ int misc_init_r(void) #endif /* CONFIG_MISC_INIT_R */ #ifdef CONFIG_POST -#if (BFIN_BOOT_MODE != BF537_BYPASS_BOOT) -/* Using sw10-PF5 as the hotkey */ -int post_hotkeys_pressed(void) -{ - return 0; -} -#else /* Using sw10-PF5 as the hotkey */ int post_hotkeys_pressed(void) { @@ -197,7 +187,6 @@ int post_hotkeys_pressed(void) } } #endif -#endif #if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) void post_word_store(ulong a) diff --git a/board/bf537-stamp/config.mk b/board/bf537-stamp/config.mk index a623c3d..1b87d53 100644 --- a/board/bf537-stamp/config.mk +++ b/board/bf537-stamp/config.mk @@ -20,6 +20,10 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -# TEXT_BASE should be defined as the MAX_SDRAM Address - 256k bytes -# 256k is defined as CFG_MONITOR_LEN in ./include/configs/<board>.h -TEXT_BASE = 0x03FC0000 + +# This is not actually used for Blackfin boards so do not change it +#TEXT_BASE = do-not-use-me + +# Set some default LDR flags based on boot mode. +LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 +LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf537-stamp/spi_flash.c b/board/bf537-stamp/spi_flash.c new file mode 100644 index 0000000..7c73ddd --- /dev/null +++ b/board/bf537-stamp/spi_flash.c @@ -0,0 +1,815 @@ +/* + * SPI flash driver + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (c) 2005-2007 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +/* Configuration options: + * CONFIG_SPI_BAUD - value to load into SPI_BAUD (divisor of SCLK to get SPI CLK) + * CONFIG_SPI_FLASH_SLOW_READ - force usage of the slower read + * WARNING: make sure your SCLK + SPI_BAUD is slow enough + */ + +#include <common.h> +#include <malloc.h> +#include <asm/io.h> +#include <asm/mach-common/bits/spi.h> + +/* Forcibly phase out these */ +#ifdef CONFIG_SPI_FLASH_NUM_SECTORS +# error do not set CONFIG_SPI_FLASH_NUM_SECTORS +#endif +#ifdef CONFIG_SPI_FLASH_SECTOR_SIZE +# error do not set CONFIG_SPI_FLASH_SECTOR_SIZE +#endif + +#if defined(CONFIG_SPI) + +struct flash_info { + char *name; + uint16_t id; + unsigned sector_size; + unsigned num_sectors; +}; + +/* SPI Speeds: 50 MHz / 33 MHz */ +static struct flash_info flash_spansion_serial_flash[] = { + { "S25FL016", 0x0215, 64 * 1024, 32 }, + { "S25FL032", 0x0216, 64 * 1024, 64 }, + { "S25FL064", 0x0217, 64 * 1024, 128 }, + { "S25FL0128", 0x0218, 256 * 1024, 64 }, + { NULL, 0, 0, 0 } +}; + +/* SPI Speeds: 50 MHz / 20 MHz */ +static struct flash_info flash_st_serial_flash[] = { + { "m25p05", 0x2010, 32 * 1024, 2 }, + { "m25p10", 0x2011, 32 * 1024, 4 }, + { "m25p20", 0x2012, 64 * 1024, 4 }, + { "m25p40", 0x2013, 64 * 1024, 8 }, + { "m25p16", 0x2015, 64 * 1024, 32 }, + { "m25p32", 0x2016, 64 * 1024, 64 }, + { "m25p64", 0x2017, 64 * 1024, 128 }, + { "m25p128", 0x2018, 256 * 1024, 64 }, + { NULL, 0, 0, 0 } +}; + +/* SPI Speeds: 66 MHz / 33 MHz */ +static struct flash_info flash_atmel_dataflash[] = { + { "AT45DB011x", 0x0c, 264, 512 }, + { "AT45DB021x", 0x14, 264, 1025 }, + { "AT45DB041x", 0x1c, 264, 2048 }, + { "AT45DB081x", 0x24, 264, 4096 }, + { "AT45DB161x", 0x2c, 528, 4096 }, + { "AT45DB321x", 0x34, 528, 8192 }, + { "AT45DB642x", 0x3c, 1056, 8192 }, + { NULL, 0, 0, 0 } +}; + +/* SPI Speed: 50 MHz / 25 MHz or 40 MHz / 20 MHz */ +static struct flash_info flash_winbond_serial_flash[] = { + { "W25X10", 0x3011, 16 * 256, 32 }, + { "W25X20", 0x3012, 16 * 256, 64 }, + { "W25X40", 0x3013, 16 * 256, 128 }, + { "W25X80", 0x3014, 16 * 256, 256 }, + { "W25P80", 0x2014, 256 * 256, 16 }, + { "W25P16", 0x2015, 256 * 256, 32 }, + { NULL, 0, 0, 0 } +}; + +struct flash_ops { + uint8_t read, write, erase, status; +}; + +#ifdef CONFIG_SPI_FLASH_SLOW_READ +# define OP_READ 0x03 +#else +# define OP_READ 0x0B +#endif +static struct flash_ops flash_st_ops = { + .read = OP_READ, + .write = 0x02, + .erase = 0xD8, + .status = 0x05, +}; + +static struct flash_ops flash_atmel_ops = { + .read = OP_READ, + .write = 0x82, + .erase = 0x81, + .status = 0xD7, +}; + +static struct flash_ops flash_winbond_ops = { + .read = OP_READ, + .write = 0x02, + .erase = 0x20, + .status = 0x05, +}; + +struct manufacturer_info { + const char *name; + uint8_t id; + struct flash_info *flashes; + struct flash_ops *ops; +}; + +static struct { + struct manufacturer_info *manufacturer; + struct flash_info *flash; + struct flash_ops *ops; + uint8_t manufacturer_id, device_id1, device_id2; + unsigned int write_length; + unsigned long sector_size, num_sectors; +} flash; + +enum { + JED_MANU_SPANSION = 0x01, + JED_MANU_ST = 0x20, + JED_MANU_ATMEL = 0x1F, + JED_MANU_WINBOND = 0xEF, +}; + +static struct manufacturer_info flash_manufacturers[] = { + { + .name = "Spansion", + .id = JED_MANU_SPANSION, + .flashes = flash_spansion_serial_flash, + .ops = &flash_st_ops, + }, + { + .name = "ST", + .id = JED_MANU_ST, + .flashes = flash_st_serial_flash, + .ops = &flash_st_ops, + }, + { + .name = "Atmel", + .id = JED_MANU_ATMEL, + .flashes = flash_atmel_dataflash, + .ops = &flash_atmel_ops, + }, + { + .name = "Winbond", + .id = JED_MANU_WINBOND, + .flashes = flash_winbond_serial_flash, + .ops = &flash_winbond_ops, + }, +}; + +#define TIMEOUT 5000 /* timeout of 5 seconds */ + +/* BF54x support */ +#ifndef pSPI_CTL +# define pSPI_CTL pSPI0_CTL +# define pSPI_BAUD pSPI0_BAUD +# define pSPI_FLG pSPI0_FLG +# define pSPI_RDBR pSPI0_RDBR +# define pSPI_STAT pSPI0_STAT +# define pSPI_TDBR pSPI0_TDBR +# define SPI0_SCK 0x0001 +# define SPI0_MOSI 0x0004 +# define SPI0_MISO 0x0002 +# define SPI0_SEL1 0x0010 +#endif + +/* Default to the SPI SSEL that we boot off of: + * BF54x, BF537, (everything new?): SSEL1 + * BF533, BF561: SSEL2 + */ +#ifndef CONFIG_SPI_FLASH_SSEL +# if defined(__ADSPBF531__) || defined(__ADSPBF532__) || \ + defined(__ADSPBF533__) || defined(__ADSPBF561__) +# define CONFIG_SPI_FLASH_SSEL 2 +# else +# define CONFIG_SPI_FLASH_SSEL 1 +# endif +#endif +#define SSEL_MASK (1 << CONFIG_SPI_FLASH_SSEL) + +static void SPI_INIT(void) +{ + /* [#3541] This delay appears to be necessary, but not sure + * exactly why as the history behind it is non-existant. + */ + udelay(CONFIG_CCLK_HZ / 25000000); + + /* enable SPI pins: SSEL, MOSI, MISO, SCK */ +#ifdef __ADSPBF54x__ + *pPORTE_FER |= (SPI0_SCK | SPI0_MOSI | SPI0_MISO | SPI0_SEL1); +#elif defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__) + *pPORTF_FER |= (PF10 | PF11 | PF12 | PF13); +#elif defined(__ADSPBF52x__) + bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_3); + bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG1 | PG2 | PG3 | PG4); +#endif + + /* initate communication upon write of TDBR */ + *pSPI_CTL = (SPE|MSTR|CPHA|CPOL|0x01); + *pSPI_BAUD = CONFIG_SPI_BAUD; +} + +static void SPI_DEINIT(void) +{ + /* put SPI settings back to reset state */ + *pSPI_CTL = 0x0400; + *pSPI_BAUD = 0; + SSYNC(); +} + +static void SPI_ON(void) +{ + /* toggle SSEL to reset the device so it'll take a new command */ + *pSPI_FLG = 0xFF00 | SSEL_MASK; + SSYNC(); + + *pSPI_FLG = ((0xFF & ~SSEL_MASK) << 8) | SSEL_MASK; + SSYNC(); +} + +static void SPI_OFF(void) +{ + /* put SPI settings back to reset state */ + *pSPI_FLG = 0xFF00; + SSYNC(); +} + +static uint8_t spi_write_read_byte(uint8_t transmit) +{ + *pSPI_TDBR = transmit; + SSYNC(); + + while ((*pSPI_STAT & TXS)) + if (ctrlc()) + break; + while (!(*pSPI_STAT & SPIF)) + if (ctrlc()) + break; + while (!(*pSPI_STAT & RXS)) + if (ctrlc()) + break; + + /* Read dummy to empty the receive register */ + return *pSPI_RDBR; +} + +static uint8_t read_status_register(void) +{ + uint8_t status_register; + + /* send instruction to read status register */ + SPI_ON(); + spi_write_read_byte(flash.ops->status); + /* send dummy to receive the status register */ + status_register = spi_write_read_byte(0); + SPI_OFF(); + + return status_register; +} + +static int wait_for_ready_status(void) +{ + ulong start = get_timer(0); + + while (get_timer(0) - start < TIMEOUT) { + switch (flash.manufacturer_id) { + case JED_MANU_SPANSION: + case JED_MANU_ST: + case JED_MANU_WINBOND: + if (!(read_status_register() & 0x01)) + return 0; + break; + + case JED_MANU_ATMEL: + if (read_status_register() & 0x80) + return 0; + break; + } + + if (ctrlc()) { + puts("\nAbort\n"); + return -1; + } + } + + puts("Timeout\n"); + return -1; +} + +/* Request and read the manufacturer and device id of parts which + * are compatible with the JEDEC standard (JEP106) and use that to + * setup other operating conditions. + */ +static int spi_detect_part(void) +{ + uint16_t dev_id; + size_t i; + + static char called_init; + if (called_init) + return 0; + + SPI_ON(); + + /* Send the request for the part identification */ + spi_write_read_byte(0x9F); + + /* Now read in the manufacturer id bytes */ + do { + flash.manufacturer_id = spi_write_read_byte(0); + if (flash.manufacturer_id == 0x7F) + puts("Warning: unhandled manufacturer continuation byte!\n"); + } while (flash.manufacturer_id == 0x7F); + + /* Now read in the first device id byte */ + flash.device_id1 = spi_write_read_byte(0); + + /* Now read in the second device id byte */ + flash.device_id2 = spi_write_read_byte(0); + + SPI_OFF(); + + dev_id = (flash.device_id1 << 8) | flash.device_id2; + + for (i = 0; i < ARRAY_SIZE(flash_manufacturers); ++i) { + if (flash.manufacturer_id == flash_manufacturers[i].id) + break; + } + if (i == ARRAY_SIZE(flash_manufacturers)) + goto unknown; + + flash.manufacturer = &flash_manufacturers[i]; + flash.ops = flash_manufacturers[i].ops; + + switch (flash.manufacturer_id) { + case JED_MANU_SPANSION: + case JED_MANU_ST: + case JED_MANU_WINBOND: + for (i = 0; flash.manufacturer->flashes[i].name; ++i) { + if (dev_id == flash.manufacturer->flashes[i].id) + break; + } + if (!flash.manufacturer->flashes[i].name) + goto unknown; + + flash.flash = &flash.manufacturer->flashes[i]; + flash.sector_size = flash.flash->sector_size; + flash.num_sectors = flash.flash->num_sectors; + flash.write_length = 256; + break; + + case JED_MANU_ATMEL: { + uint8_t status = read_status_register(); + + for (i = 0; flash.manufacturer->flashes[i].name; ++i) { + if ((status & 0x3c) == flash.manufacturer->flashes[i].id) + break; + } + if (!flash.manufacturer->flashes[i].name) + goto unknown; + + flash.flash = &flash.manufacturer->flashes[i]; + flash.sector_size = flash.flash->sector_size; + flash.num_sectors = flash.flash->num_sectors; + + /* see if flash is in "power of 2" mode */ + if (status & 0x1) + flash.sector_size &= ~(1 << (ffs(flash.sector_size) - 1)); + + flash.write_length = flash.sector_size; + break; + } + } + + called_init = 1; + return 0; + + unknown: + printf("Unknown SPI device: 0x%02X 0x%02X 0x%02X\n", + flash.manufacturer_id, flash.device_id1, flash.device_id2); + return 1; +} + +/* + * Function: spi_init_f + * Description: Init SPI-Controller (ROM part) + * return: --- + */ +void spi_init_f(void) +{ +} + +/* + * Function: spi_init_r + * Description: Init SPI-Controller (RAM part) - + * The malloc engine is ready and we can move our buffers to + * normal RAM + * return: --- + */ +void spi_init_r(void) +{ +#if defined(CONFIG_POST) && (CONFIG_POST & CFG_POST_SPI) + /* Our testing strategy here is pretty basic: + * - fill src memory with an 8-bit pattern + * - write the src memory to the SPI flash + * - read the SPI flash into the dst memory + * - compare src and dst memory regions + * - repeat a few times + * The variations we test for: + * - change the 8-bit pattern a bit + * - change the read/write block size so we know: + * - writes smaller/equal/larger than the buffer work + * - writes smaller/equal/larger than the sector work + * - change the SPI offsets so we know: + * - writing partial sectors works + */ + uint8_t *mem_src, *mem_dst; + size_t i, c, l, o; + size_t test_count, errors; + uint8_t pattern; + + SPI_INIT(); + + if (spi_detect_part()) + goto out; + eeprom_info(); + + ulong lengths[] = { + flash.write_length, + flash.write_length * 2, + flash.write_length / 2, + flash.sector_size, + flash.sector_size * 2, + flash.sector_size / 2 + }; + ulong offsets[] = { + 0, + flash.write_length, + flash.write_length * 2, + flash.write_length / 2, + flash.write_length / 4, + flash.sector_size, + flash.sector_size * 2, + flash.sector_size / 2, + flash.sector_size / 4, + }; + + /* the exact addresses are arbitrary ... they just need to not overlap */ + mem_src = (void *)(0); + mem_dst = (void *)(max(flash.write_length, flash.sector_size) * 2); + + test_count = 0; + errors = 0; + pattern = 0x00; + + for (i = 0; i < 16; ++i) { /* 16 = 8 bits * 2 iterations */ + for (l = 0; l < ARRAY_SIZE(lengths); ++l) { + for (o = 0; o < ARRAY_SIZE(offsets); ++o) { + ulong len = lengths[l]; + ulong off = offsets[o]; + + printf("Testing pattern 0x%02X of length %5lu and offset %5lu: ", pattern, len, off); + + /* setup the source memory region */ + memset(mem_src, pattern, len); + + test_count += 4; + for (c = 0; c < 4; ++c) { /* 4 is just a random repeat count */ + if (ctrlc()) { + puts("\nAbort\n"); + goto out; + } + + /* make sure background fill pattern != pattern */ + memset(mem_dst, pattern ^ 0xFF, len); + + /* write out the source memory and then read it back and compare */ + eeprom_write(0, off, mem_src, len); + eeprom_read(0, off, mem_dst, len); + + if (memcmp(mem_src, mem_dst, len)) { + for (c = 0; c < len; ++c) + if (mem_src[c] != mem_dst[c]) + break; + printf(" FAIL @ offset %u, skipping repeats ", c); + ++errors; + break; + } + + /* XXX: should shrink write region here to test with + * leading/trailing canaries so we know surrounding + * bytes don't get screwed. + */ + } + puts("\n"); + } + } + + /* invert the pattern every other run and shift out bits slowly */ + pattern ^= 0xFF; + if (i % 2) + pattern = (pattern | 0x01) << 1; + } + + if (errors) + printf("SPI FAIL: Out of %i tests, there were %i errors ;(\n", test_count, errors); + else + printf("SPI PASS: %i tests worked!\n", test_count); + + out: + SPI_DEINIT(); + +#endif +} + +static void transmit_address(uint32_t addr) +{ + /* Send the highest byte of the 24 bit address at first */ + spi_write_read_byte(addr >> 16); + /* Send the middle byte of the 24 bit address at second */ + spi_write_read_byte(addr >> 8); + /* Send the lowest byte of the 24 bit address finally */ + spi_write_read_byte(addr); +} + +/* + * Read a value from flash for verify purpose + * Inputs: unsigned long ulStart - holds the SPI start address + * int pnData - pointer to store value read from flash + * long lCount - number of elements to read + */ +static int read_flash(unsigned long address, long count, uchar *buffer) +{ + size_t i; + + /* Send the read command to SPI device */ + SPI_ON(); + spi_write_read_byte(flash.ops->read); + transmit_address(address); + +#ifndef CONFIG_SPI_FLASH_SLOW_READ + /* Send dummy byte when doing SPI fast reads */ + spi_write_read_byte(0); +#endif + + /* After the SPI device address has been placed on the MOSI pin the data can be */ + /* received on the MISO pin. */ + for (i = 1; i <= count; ++i) { + *buffer++ = spi_write_read_byte(0); + if (i % flash.sector_size == 0) + puts("."); + } + + SPI_OFF(); + + return 0; +} + +static int enable_writing(void) +{ + ulong start; + + if (flash.manufacturer_id == JED_MANU_ATMEL) + return 0; + + /* A write enable instruction must previously have been executed */ + SPI_ON(); + spi_write_read_byte(0x06); + SPI_OFF(); + + /* The status register will be polled to check the write enable latch "WREN" */ + start = get_timer(0); + while (get_timer(0) - start < TIMEOUT) { + if (read_status_register() & 0x02) + return 0; + + if (ctrlc()) { + puts("\nAbort\n"); + return -1; + } + } + + puts("Timeout\n"); + return -1; +} + +static long address_to_sector(unsigned long address) +{ + if (address > (flash.num_sectors * flash.sector_size) - 1) + return -1; + return address / flash.sector_size; +} + +static int erase_sector(int address) +{ + /* sector gets checked in higher function, so assume it's valid + * here and figure out the offset of the sector in flash + */ + if (enable_writing()) + return -1; + + /* + * Send the erase block command to the flash followed by the 24 address + * to point to the start of a sector + */ + SPI_ON(); + spi_write_read_byte(flash.ops->erase); + transmit_address(address); + SPI_OFF(); + + return wait_for_ready_status(); +} + +/* Write [count] bytes out of [buffer] into the given SPI [address] */ +static long write_flash(unsigned long address, long count, uchar *buffer) +{ + long i, write_buffer_size; + + if (enable_writing()) + return -1; + + /* Send write command followed by the 24 bit address */ + SPI_ON(); + spi_write_read_byte(flash.ops->write); + transmit_address(address); + + /* Shoot out a single write buffer */ + write_buffer_size = min(count, flash.write_length); + for (i = 0; i < write_buffer_size; ++i) + spi_write_read_byte(buffer[i]); + + SPI_OFF(); + + /* Wait for the flash to do its thing */ + if (wait_for_ready_status()) { + puts("SPI Program Time out! "); + return -1; + } + + return i; +} + +/* Write [count] bytes out of [buffer] into the given SPI [address] */ +static int write_sector(unsigned long address, long count, uchar *buffer) +{ + long write_cnt; + + while (count != 0) { + write_cnt = write_flash(address, count, buffer); + if (write_cnt == -1) + return -1; + + /* Now that we've sent some bytes out to the flash, update + * our counters a bit + */ + count -= write_cnt; + address += write_cnt; + buffer += write_cnt; + } + + /* return the appropriate error code */ + return 0; +} + +/* + * Function: spi_write + */ +ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len) +{ + unsigned long offset; + int start_sector, end_sector; + int start_byte, end_byte; + uchar *temp = NULL; + int num, ret = 0; + + SPI_INIT(); + + if (spi_detect_part()) + goto out; + + offset = addr[0] << 16 | addr[1] << 8 | addr[2]; + + /* Get the start block number */ + start_sector = address_to_sector(offset); + if (start_sector == -1) { + puts("Invalid sector! "); + goto out; + } + end_sector = address_to_sector(offset + len - 1); + if (end_sector == -1) { + puts("Invalid sector! "); + goto out; + } + + /* Since flashes operate in sector units but the eeprom command + * operates as a continuous stream of bytes, we need to emulate + * the eeprom behavior. So here we read in the sector, overlay + * any bytes we're actually modifying, erase the sector, and + * then write back out the new sector. + */ + temp = malloc(flash.sector_size); + if (!temp) { + puts("Malloc for sector failed! "); + goto out; + } + + for (num = start_sector; num <= end_sector; num++) { + unsigned long address = num * flash.sector_size; + + /* XXX: should add an optimization when spanning sectors: + * No point in reading in a sector if we're going to be + * clobbering the whole thing. Need to also add a test + * case to make sure the optimization is correct. + */ + if (read_flash(address, flash.sector_size, temp)) { + puts("Read sector failed! "); + len = 0; + break; + } + + start_byte = max(address, offset); + end_byte = address + flash.sector_size - 1; + if (end_byte > (offset + len)) + end_byte = (offset + len - 1); + + memcpy(temp + start_byte - address, + buffer + start_byte - offset, + end_byte - start_byte + 1); + + if (erase_sector(address)) { + puts("Erase sector failed! "); + goto out; + } + + if (write_sector(address, flash.sector_size, temp)) { + puts("Write sector failed! "); + goto out; + } + + puts("."); + } + + ret = len; + + out: + free(temp); + + SPI_DEINIT(); + + return ret; +} + +/* + * Function: spi_read + */ +ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len) +{ + unsigned long offset; + + SPI_INIT(); + + if (spi_detect_part()) + len = 0; + else { + offset = addr[0] << 16 | addr[1] << 8 | addr[2]; + read_flash(offset, len, buffer); + } + + SPI_DEINIT(); + + return len; +} + +/* + * Spit out some useful information about the SPI eeprom + */ +int eeprom_info(void) +{ + int ret = 0; + + SPI_INIT(); + + if (spi_detect_part()) + ret = 1; + else + printf("SPI Device: %s 0x%02X (%s) 0x%02X 0x%02X\n" + "Parameters: num sectors = %i, sector size = %i, write size = %i\n" + "Flash Size: %i mbit (%i mbyte)\n" + "Status: 0x%02X\n", + flash.flash->name, flash.manufacturer_id, flash.manufacturer->name, + flash.device_id1, flash.device_id2, flash.num_sectors, + flash.sector_size, flash.write_length, + (flash.num_sectors * flash.sector_size) >> 17, + (flash.num_sectors * flash.sector_size) >> 20, + read_status_register()); + + SPI_DEINIT(); + + return ret; +} + +#endif diff --git a/board/bf537-stamp/stm_m25p64.c b/board/bf537-stamp/stm_m25p64.c deleted file mode 100644 index c48c3c7..0000000 --- a/board/bf537-stamp/stm_m25p64.c +++ /dev/null @@ -1,516 +0,0 @@ -/**************************************************************************** - * SPI flash driver for M25P64 - ****************************************************************************/ -#include <common.h> -#include <linux/ctype.h> -#include <asm/io.h> -#include <asm/mach-common/bits/spi.h> - -#if defined(CONFIG_SPI) - -/* Application definitions */ - -#define NUM_SECTORS 128 /* number of sectors */ -#define SECTOR_SIZE 0x10000 -#define NOP_NUM 1000 - -#define COMMON_SPI_SETTINGS (SPE|MSTR|CPHA|CPOL) /* Settings to the SPI_CTL */ -#define TIMOD01 (0x01) /* stes the SPI to work with core instructions */ - -/* Flash commands */ -#define SPI_WREN (0x06) /*Set Write Enable Latch */ -#define SPI_WRDI (0x04) /*Reset Write Enable Latch */ -#define SPI_RDSR (0x05) /*Read Status Register */ -#define SPI_WRSR (0x01) /*Write Status Register */ -#define SPI_READ (0x03) /*Read data from memory */ -#define SPI_FAST_READ (0x0B) /*Read data from memory */ -#define SPI_PP (0x02) /*Program Data into memory */ -#define SPI_SE (0xD8) /*Erase one sector in memory */ -#define SPI_BE (0xC7) /*Erase all memory */ -#define WIP (0x1) /*Check the write in progress bit of the SPI status register */ -#define WEL (0x2) /*Check the write enable bit of the SPI status register */ - -#define TIMEOUT 350000000 - -typedef enum { - NO_ERR, - POLL_TIMEOUT, - INVALID_SECTOR, - INVALID_BLOCK, -} ERROR_CODE; - -void spi_init_f(void); -void spi_init_r(void); -ssize_t spi_read(uchar *, int, uchar *, int); -ssize_t spi_write(uchar *, int, uchar *, int); - -char ReadStatusRegister(void); -void Wait_For_SPIF(void); -void SetupSPI(const int spi_setting); -void SPI_OFF(void); -void SendSingleCommand(const int iCommand); - -ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector); -ERROR_CODE EraseBlock(int nBlock); -ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData); -ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData); -ERROR_CODE Wait_For_Status(char Statusbit); -ERROR_CODE Wait_For_WEL(void); - -/* - * Function: spi_init_f - * Description: Init SPI-Controller (ROM part) - * return: --- - */ -void spi_init_f(void) -{ -} - -/* - * Function: spi_init_r - * Description: Init SPI-Controller (RAM part) - - * The malloc engine is ready and we can move our buffers to - * normal RAM - * return: --- - */ -void spi_init_r(void) -{ - return; -} - -/* - * Function: spi_write - */ -ssize_t spi_write(uchar * addr, int alen, uchar * buffer, int len) -{ - unsigned long offset; - int start_block, end_block; - int start_byte, end_byte; - ERROR_CODE result = NO_ERR; - uchar temp[SECTOR_SIZE]; - int i, num; - - offset = addr[0] << 16 | addr[1] << 8 | addr[2]; - /* Get the start block number */ - result = GetSectorNumber(offset, &start_block); - if (result == INVALID_SECTOR) { - printf("Invalid sector! "); - return 0; - } - /* Get the end block number */ - result = GetSectorNumber(offset + len - 1, &end_block); - if (result == INVALID_SECTOR) { - printf("Invalid sector! "); - return 0; - } - - for (num = start_block; num <= end_block; num++) { - ReadData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp); - start_byte = num * SECTOR_SIZE; - end_byte = (num + 1) * SECTOR_SIZE - 1; - if (start_byte < offset) - start_byte = offset; - if (end_byte > (offset + len)) - end_byte = (offset + len - 1); - for (i = start_byte; i <= end_byte; i++) - temp[i - num * SECTOR_SIZE] = buffer[i - offset]; - EraseBlock(num); - result = WriteData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp); - if (result != NO_ERR) - return 0; - printf("."); - } - return len; -} - -/* - * Function: spi_read - */ -ssize_t spi_read(uchar * addr, int alen, uchar * buffer, int len) -{ - unsigned long offset; - offset = addr[0] << 16 | addr[1] << 8 | addr[2]; - ReadData(offset, len, (int *)buffer); - return len; -} - -void SendSingleCommand(const int iCommand) -{ - unsigned short dummy; - - /* turns on the SPI in single write mode */ - SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); - - /* sends the actual command to the SPI TX register */ - *pSPI_TDBR = iCommand; - SSYNC(); - - /* The SPI status register will be polled to check the SPIF bit */ - Wait_For_SPIF(); - - dummy = *pSPI_RDBR; - - /* The SPI will be turned off */ - SPI_OFF(); - -} - -void SetupSPI(const int spi_setting) -{ - - if (icache_status() || dcache_status()) - udelay(CONFIG_CCLK_HZ / 50000000); - /*sets up the PF10 to be the slave select of the SPI */ - *pPORTF_FER |= (PF10 | PF11 | PF12 | PF13); - *pSPI_FLG = 0xFF02; - *pSPI_BAUD = CONFIG_SPI_BAUD; - *pSPI_CTL = spi_setting; - SSYNC(); - - *pSPI_FLG = 0xFD02; - SSYNC(); -} - -void SPI_OFF(void) -{ - - *pSPI_CTL = 0x0400; /* disable SPI */ - *pSPI_FLG = 0; - *pSPI_BAUD = 0; - SSYNC(); - udelay(CONFIG_CCLK_HZ / 50000000); - -} - -void Wait_For_SPIF(void) -{ - unsigned short dummyread; - while ((*pSPI_STAT & TXS)) ; - while (!(*pSPI_STAT & SPIF)) ; - while (!(*pSPI_STAT & RXS)) ; - /* Read dummy to empty the receive register */ - dummyread = *pSPI_RDBR; -} - -ERROR_CODE Wait_For_WEL(void) -{ - int i; - char status_register = 0; - ERROR_CODE ErrorCode = NO_ERR; - - for (i = 0; i < TIMEOUT; i++) { - status_register = ReadStatusRegister(); - if ((status_register & WEL)) { - ErrorCode = NO_ERR; - break; - } - ErrorCode = POLL_TIMEOUT; /* Time out error */ - }; - - return ErrorCode; -} - -ERROR_CODE Wait_For_Status(char Statusbit) -{ - int i; - char status_register = 0xFF; - ERROR_CODE ErrorCode = NO_ERR; - - for (i = 0; i < TIMEOUT; i++) { - status_register = ReadStatusRegister(); - if (!(status_register & Statusbit)) { - ErrorCode = NO_ERR; - break; - } - ErrorCode = POLL_TIMEOUT; /* Time out error */ - }; - - return ErrorCode; -} - -char ReadStatusRegister(void) -{ - char status_register = 0; - - SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); /* Turn on the SPI */ - - *pSPI_TDBR = SPI_RDSR; /* send instruction to read status register */ - SSYNC(); - Wait_For_SPIF(); /*wait until the instruction has been sent */ - *pSPI_TDBR = 0; /*send dummy to receive the status register */ - SSYNC(); - Wait_For_SPIF(); /*wait until the data has been sent */ - status_register = *pSPI_RDBR; /*read the status register */ - - SPI_OFF(); /* Turn off the SPI */ - - return status_register; -} - -ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector) -{ - int nSector = 0; - ERROR_CODE ErrorCode = NO_ERR; - - if (ulOffset > (NUM_SECTORS * 0x10000 - 1)) { - ErrorCode = INVALID_SECTOR; - return ErrorCode; - } - - nSector = (int)ulOffset / 0x10000; - *pnSector = nSector; - - return ErrorCode; -} - -ERROR_CODE EraseBlock(int nBlock) -{ - unsigned long ulSectorOff = 0x0, ShiftValue; - ERROR_CODE ErrorCode = NO_ERR; - - /* if the block is invalid just return */ - if ((nBlock < 0) || (nBlock > NUM_SECTORS)) { - ErrorCode = INVALID_BLOCK; - return ErrorCode; - } - /* figure out the offset of the block in flash */ - if ((nBlock >= 0) && (nBlock < NUM_SECTORS)) { - ulSectorOff = (nBlock * SECTOR_SIZE); - - } else { - ErrorCode = INVALID_BLOCK; - return ErrorCode; - } - - /* A write enable instruction must previously have been executed */ - SendSingleCommand(SPI_WREN); - - /* The status register will be polled to check the write enable latch "WREN" */ - ErrorCode = Wait_For_WEL(); - - if (POLL_TIMEOUT == ErrorCode) { - printf("SPI Erase block error\n"); - return ErrorCode; - } else - - /* Turn on the SPI to send single commands */ - SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); - - /* - * Send the erase block command to the flash followed by the 24 address - * to point to the start of a sector - */ - *pSPI_TDBR = SPI_SE; - SSYNC(); - Wait_For_SPIF(); - /* Send the highest byte of the 24 bit address at first */ - ShiftValue = (ulSectorOff >> 16); - *pSPI_TDBR = ShiftValue; - SSYNC(); - /* Wait until the instruction has been sent */ - Wait_For_SPIF(); - /* Send the middle byte of the 24 bit address at second */ - ShiftValue = (ulSectorOff >> 8); - *pSPI_TDBR = ShiftValue; - SSYNC(); - /* Wait until the instruction has been sent */ - Wait_For_SPIF(); - /* Send the lowest byte of the 24 bit address finally */ - *pSPI_TDBR = ulSectorOff; - SSYNC(); - /* Wait until the instruction has been sent */ - Wait_For_SPIF(); - - /* Turns off the SPI */ - SPI_OFF(); - - /* Poll the status register to check the Write in Progress bit */ - /* Sector erase takes time */ - ErrorCode = Wait_For_Status(WIP); - - /* block erase should be complete */ - return ErrorCode; -} - -/* - * ERROR_CODE ReadData() - * Read a value from flash for verify purpose - * Inputs: unsigned long ulStart - holds the SPI start address - * int pnData - pointer to store value read from flash - * long lCount - number of elements to read - */ -ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData) -{ - unsigned long ShiftValue; - char *cnData; - int i; - - /* Pointer cast to be able to increment byte wise */ - - cnData = (char *)pnData; - /* Start SPI interface */ - SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); - -#ifdef CONFIG_SPI_FLASH_FAST_READ - /* Send the read command to SPI device */ - *pSPI_TDBR = SPI_FAST_READ; -#else - /* Send the read command to SPI device */ - *pSPI_TDBR = SPI_READ; -#endif - SSYNC(); - /* Wait until the instruction has been sent */ - Wait_For_SPIF(); - /* Send the highest byte of the 24 bit address at first */ - ShiftValue = (ulStart >> 16); - /* Send the byte to the SPI device */ - *pSPI_TDBR = ShiftValue; - SSYNC(); - /* Wait until the instruction has been sent */ - Wait_For_SPIF(); - /* Send the middle byte of the 24 bit address at second */ - ShiftValue = (ulStart >> 8); - /* Send the byte to the SPI device */ - *pSPI_TDBR = ShiftValue; - SSYNC(); - /* Wait until the instruction has been sent */ - Wait_For_SPIF(); - /* Send the lowest byte of the 24 bit address finally */ - *pSPI_TDBR = ulStart; - SSYNC(); - /* Wait until the instruction has been sent */ - Wait_For_SPIF(); - -#ifdef CONFIG_SPI_FLASH_FAST_READ - /* Send dummy for FAST_READ */ - *pSPI_TDBR = 0; - SSYNC(); - /* Wait until the instruction has been sent */ - Wait_For_SPIF(); -#endif - - /* After the SPI device address has been placed on the MOSI pin the data can be */ - /* received on the MISO pin. */ - for (i = 0; i < lCount; i++) { - *pSPI_TDBR = 0; - SSYNC(); - while (!(*pSPI_STAT & RXS)) ; - *cnData++ = *pSPI_RDBR; - - if ((i >= SECTOR_SIZE) && (i % SECTOR_SIZE == 0)) - printf("."); - } - - /* Turn off the SPI */ - SPI_OFF(); - - return NO_ERR; -} - -ERROR_CODE WriteFlash(unsigned long ulStartAddr, long lTransferCount, - int *iDataSource, long *lWriteCount) -{ - - unsigned long ulWAddr; - long lWTransferCount = 0; - int i; - char iData; - char *temp = (char *)iDataSource; - ERROR_CODE ErrorCode = NO_ERR; - - /* First, a Write Enable Command must be sent to the SPI. */ - SendSingleCommand(SPI_WREN); - - /* - * Second, the SPI Status Register will be tested whether the - * Write Enable Bit has been set - */ - ErrorCode = Wait_For_WEL(); - if (POLL_TIMEOUT == ErrorCode) { - printf("SPI Write Time Out\n"); - return ErrorCode; - } else - /* Third, the 24 bit address will be shifted out - * the SPI MOSI bytewise. - * Turns the SPI on - */ - SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); - *pSPI_TDBR = SPI_PP; - SSYNC(); - /*wait until the instruction has been sent */ - Wait_For_SPIF(); - ulWAddr = (ulStartAddr >> 16); - *pSPI_TDBR = ulWAddr; - SSYNC(); - /*wait until the instruction has been sent */ - Wait_For_SPIF(); - ulWAddr = (ulStartAddr >> 8); - *pSPI_TDBR = ulWAddr; - SSYNC(); - /*wait until the instruction has been sent */ - Wait_For_SPIF(); - ulWAddr = ulStartAddr; - *pSPI_TDBR = ulWAddr; - SSYNC(); - /*wait until the instruction has been sent */ - Wait_For_SPIF(); - /* - * Fourth, maximum number of 256 bytes will be taken from the Buffer - * and sent to the SPI device. - */ - for (i = 0; (i < lTransferCount) && (i < 256); i++, lWTransferCount++) { - iData = *temp; - *pSPI_TDBR = iData; - SSYNC(); - /*wait until the instruction has been sent */ - Wait_For_SPIF(); - temp++; - } - - /* Turns the SPI off */ - SPI_OFF(); - - /* - * Sixth, the SPI Write in Progress Bit must be toggled to ensure the - * programming is done before start of next transfer - */ - ErrorCode = Wait_For_Status(WIP); - - if (POLL_TIMEOUT == ErrorCode) { - printf("SPI Program Time out!\n"); - return ErrorCode; - } else - - *lWriteCount = lWTransferCount; - - return ErrorCode; -} - -ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData) -{ - - unsigned long ulWStart = ulStart; - long lWCount = lCount, lWriteCount; - long *pnWriteCount = &lWriteCount; - - ERROR_CODE ErrorCode = NO_ERR; - - while (lWCount != 0) { - ErrorCode = WriteFlash(ulWStart, lWCount, pnData, pnWriteCount); - - /* - * After each function call of WriteFlash the counter - * must be adjusted - */ - lWCount -= *pnWriteCount; - - /* Also, both address pointers must be recalculated. */ - ulWStart += *pnWriteCount; - pnData += *pnWriteCount / 4; - } - - /* return the appropriate error code */ - return ErrorCode; -} - -#endif /* CONFIG_SPI */ diff --git a/board/bf537-stamp/u-boot.lds.S b/board/bf537-stamp/u-boot.lds.S index 8632097..01780c5 100644 --- a/board/bf537-stamp/u-boot.lds.S +++ b/board/bf537-stamp/u-boot.lds.S @@ -1,7 +1,7 @@ /* * U-boot - u-boot.lds.S * - * Copyright (c) 2005-2007 Analog Device Inc. + * Copyright (c) 2005-2008 Analog Device Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -26,165 +26,111 @@ */ #include <config.h> +#include <asm/blackfin.h> +#undef ALIGN + +/* If we don't actually load anything into L1 data, this will avoid + * a syntax error. If we do actually load something into L1 data, + * we'll get a linker memory load error (which is what we'd want). + * This is here in the first place so we can quickly test building + * for different CPU's which may lack non-cache L1 data. + */ +#ifndef L1_DATA_B_SRAM +# define L1_DATA_B_SRAM CFG_MONITOR_BASE +# define L1_DATA_B_SRAM_SIZE 0 +#endif OUTPUT_ARCH(bfin) -SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); -/* Do we need any of these for elf? - __DYNAMIC = 0; */ + +/* The 0xC offset is so we don't clobber the tiny LDR jump block. */ MEMORY - { - ram : ORIGIN = (CFG_MONITOR_BASE), LENGTH = (256 * 1024) - l1_code : ORIGIN = 0xFFA00000, LENGTH = 0xC000 - l1_data : ORIGIN = 0xFF900000, LENGTH = 0x4000 - } +{ + ram : ORIGIN = CFG_MONITOR_BASE, LENGTH = CFG_MONITOR_LEN + l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE + l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE +} SECTIONS { - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; /*0x1000;*/ - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - . = CFG_MONITOR_BASE; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector before the environment sector. If it throws */ - /* an error during compilation remove an object here to get */ - /* it linked after the configuration sector. */ - - cpu/bf537/start.o (.text) - cpu/bf537/start1.o (.text) - cpu/bf537/traps.o (.text) - cpu/bf537/interrupt.o (.text) - cpu/bf537/serial.o (.text) - common/dlmalloc.o (.text) -/* lib_blackfin/bf533_string.o (.text) */ -/* lib_generic/vsprintf.o (.text) */ - lib_generic/crc32.o (.text) -/* lib_generic/zlib.o (.text) */ -/* board/bf537-stamp/bf537-stamp.o (.text) */ - - . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) - - *(EXCLUDE_FILE (board/bf537-stamp/post-memory.o) .text) - *(.fixup) - *(.got1) - } > ram - _etext = .; - PROVIDE (etext = .); - .text_l1 : - { - . = ALIGN(4) ; - _text_l1 = .; - PROVIDE (text_l1 = .); - board/bf537-stamp/post-memory.o (.text) - . = ALIGN(4) ; - _etext_l1 = .; - PROVIDE (etext_l1 = .); - } > l1_code AT > ram - - .rodata : - { - . = ALIGN(4); - *(EXCLUDE_FILE (board/bf537-stamp/post-memory.o) .rodata) - *(EXCLUDE_FILE (board/bf537-stamp/post-memory.o) .rodata1) - *(EXCLUDE_FILE (board/bf537-stamp/post-memory.o) .rodata.str1.4) - *(.eh_frame) - . = ALIGN(4); - } > ram - - . = ALIGN(4); - _erodata = .; - PROVIDE (erodata = .); - .rodata_l1 : - { - . = ALIGN(4) ; - _rodata_l1 = .; - PROVIDE (rodata_l1 = .); - board/bf537-stamp/post-memory.o (.rodata) - board/bf537-stamp/post-memory.o (.rodata1) - board/bf537-stamp/post-memory.o (.rodata.str1.4) - . = ALIGN(4) ; - _erodata_l1 = .; - PROVIDE(erodata_l1 = .); - } > l1_data AT > ram - - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } > ram - _edata = .; - PROVIDE (edata = .); - - ___u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } > ram - ___u_boot_cmd_end = .; - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - .bss : - { - __bss_start = .; - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } > ram - _end = . ; - PROVIDE (end = .); + .text : + { +#ifdef ENV_IS_EMBEDDED + /* WARNING - the following is hand-optimized to fit within + * the sector before the environment sector. If it throws + * an error during compilation remove an object here to get + * it linked after the configuration sector. + */ + + cpu/blackfin/start.o (.text) + cpu/blackfin/traps.o (.text) + cpu/blackfin/interrupt.o (.text) + cpu/blackfin/serial.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) +#endif + + *(.text .text.*) + } >ram + + .rodata : + { + . = ALIGN(4); + *(.rodata .rodata.*) + *(.rodata1) + *(.eh_frame) + . = ALIGN(4); + } >ram + + .data : + { + . = ALIGN(256); + *(.data .data.*) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } >ram + + .u_boot_cmd : + { + ___u_boot_cmd_start = .; + *(.u_boot_cmd) + ___u_boot_cmd_end = .; + } >ram + + .text_l1 : + { + . = ALIGN(4); + __stext_l1 = .; + *(.l1.text) + . = ALIGN(4); + __etext_l1 = .; + } >l1_code AT>ram + __stext_l1_lma = LOADADDR(.text_l1); + + .data_l1 : + { + . = ALIGN(4); + __sdata_l1 = .; + *(.l1.data) + *(.l1.bss) + . = ALIGN(4); + __edata_l1 = .; + } >l1_data AT>ram + __sdata_l1_lma = LOADADDR(.data_l1); + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss .bss.*) + *(COMMON) + __bss_end = .; + } >ram } diff --git a/board/bf561-ezkit/Makefile b/board/bf561-ezkit/Makefile index a3c2e5b..73bef24 100644 --- a/board/bf561-ezkit/Makefile +++ b/board/bf561-ezkit/Makefile @@ -39,7 +39,7 @@ $(LIB): $(obj).depend $(OBJS) $(SOBJS) u-boot.lds $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) u-boot.lds: u-boot.lds.S - $(CPP) $(CPPFLAGS) -P -Ubfin $^ > $@.tmp + $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp mv -f $@.tmp $@ clean: diff --git a/board/bf561-ezkit/config.mk b/board/bf561-ezkit/config.mk index a623c3d..de80ffe 100644 --- a/board/bf561-ezkit/config.mk +++ b/board/bf561-ezkit/config.mk @@ -20,6 +20,6 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -# TEXT_BASE should be defined as the MAX_SDRAM Address - 256k bytes -# 256k is defined as CFG_MONITOR_LEN in ./include/configs/<board>.h -TEXT_BASE = 0x03FC0000 + +# This is not actually used for Blackfin boards so do not change it +#TEXT_BASE = do-not-use-me diff --git a/board/bf561-ezkit/u-boot.lds.S b/board/bf561-ezkit/u-boot.lds.S index 84df5fc..ddafdcb 100644 --- a/board/bf561-ezkit/u-boot.lds.S +++ b/board/bf561-ezkit/u-boot.lds.S @@ -1,7 +1,7 @@ /* * U-boot - u-boot.lds.S * - * Copyright (c) 2005-2007 Analog Device Inc. + * Copyright (c) 2005-2008 Analog Device Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -26,128 +26,113 @@ */ #include <config.h> +#include <asm/blackfin.h> +#undef ALIGN + +/* If we don't actually load anything into L1 data, this will avoid + * a syntax error. If we do actually load something into L1 data, + * we'll get a linker memory load error (which is what we'd want). + * This is here in the first place so we can quickly test building + * for different CPU's which may lack non-cache L1 data. + */ +#ifndef L1_DATA_B_SRAM +# define L1_DATA_B_SRAM CFG_MONITOR_BASE +# define L1_DATA_B_SRAM_SIZE 0 +#endif OUTPUT_ARCH(bfin) -OUTPUT_ARCH(bfin) -SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS + +/* The 0xC offset is so we don't clobber the tiny LDR jump block. */ +MEMORY { - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - . = CFG_MONITOR_BASE; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector before the environment sector. If it throws */ - /* an error during compilation remove an object here to get */ - /* it linked after the configuration sector. */ + ram : ORIGIN = CFG_MONITOR_BASE, LENGTH = CFG_MONITOR_LEN + l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE + l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE +} - cpu/bf561/start.o (.text) - cpu/bf561/start1.o (.text) - cpu/bf561/traps.o (.text) - cpu/bf561/interrupt.o (.text) - cpu/bf561/serial.o (.text) - common/dlmalloc.o (.text) -/* lib_blackfin/bf533_string.o (.text) */ -/* lib_generic/vsprintf.o (.text) */ - lib_generic/crc32.o (.text) - lib_generic/zlib.o (.text) - board/bf561-ezkit/bf561-ezkit.o (.text) +SECTIONS +{ + .text : + { +#ifdef ENV_IS_EMBEDDED + /* WARNING - the following is hand-optimized to fit within + * the sector before the environment sector. If it throws + * an error during compilation remove an object here to get + * it linked after the configuration sector. + */ - . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + cpu/blackfin/start.o (.text) + cpu/blackfin/traps.o (.text) + cpu/blackfin/interrupt.o (.text) + cpu/blackfin/serial.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_generic/zlib.o (.text) + board/bf561-ezkit/bf561-ezkit.o (.text) - *(.text) - *(.fixup) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) +#endif - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; + *(.text .text.*) + } >ram - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); + .rodata : + { + . = ALIGN(4); + *(.rodata .rodata.*) + *(.rodata1) + *(.eh_frame) + . = ALIGN(4); + } >ram - ___u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - ___u_boot_cmd_end = .; + .data : + { + . = ALIGN(256); + *(.data .data.*) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } >ram + .u_boot_cmd : + { + ___u_boot_cmd_start = .; + *(.u_boot_cmd) + ___u_boot_cmd_end = .; + } >ram - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; + .text_l1 : + { + . = ALIGN(4); + __stext_l1 = .; + *(.l1.text) + . = ALIGN(4); + __etext_l1 = .; + } >l1_code AT>ram + __stext_l1_lma = LOADADDR(.text_l1); - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; + .data_l1 : + { + . = ALIGN(4); + __sdata_l1 = .; + *(.l1.data) + *(.l1.bss) + . = ALIGN(4); + __edata_l1 = .; + } >l1_data AT>ram + __sdata_l1_lma = LOADADDR(.data_l1); - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - _end = . ; - PROVIDE (end = .); + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss .bss.*) + *(COMMON) + __bss_end = .; + } >ram } diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index ceb128c..3dbb2e1 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -67,12 +67,12 @@ int board_early_init_f(void) out_be32((void*)GPIO1_OR, 0x00000000); out_be32((void*)GPIO1_TCR, 0xc2000000 | CFG_GPIO1_IORSTN | + CFG_GPIO1_IORST2N | CFG_GPIO1_LEDUSR1 | CFG_GPIO1_LEDUSR2 | CFG_GPIO1_LEDPOST | CFG_GPIO1_LEDDU); out_be32((void*)GPIO1_ODR, CFG_GPIO1_LEDDU); - out_be32((void*)GPIO1_OSRL, 0x5c280000); out_be32((void*)GPIO1_OSRH, 0x00000000); out_be32((void*)GPIO1_TSRL, 0x0c000000); @@ -243,7 +243,8 @@ int misc_init_r(void) * release IO-RST# * We have to wait at least 560ms until we may call usbhub_init */ - out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | CFG_GPIO1_IORSTN); + out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | + CFG_GPIO1_IORSTN | CFG_GPIO1_IORST2N); /* * flash USR1/2 LEDs (600ms) diff --git a/board/esd/du440/du440.h b/board/esd/du440/du440.h index 5c362e4..83fdac7 100644 --- a/board/esd/du440/du440.h +++ b/board/esd/du440/du440.h @@ -24,6 +24,7 @@ #define CFG_GPIO1_DCF77 (0x80000000 >> (42-32)) /* GPIO1_42 */ #define CFG_GPIO1_IORSTN (0x80000000 >> (55-32)) /* GPIO1_55 */ +#define CFG_GPIO1_IORST2N (0x80000000 >> (47-32)) /* GPIO1_47 */ #define CFG_GPIO1_HWVER_MASK 0x000000f0 /* GPIO1_56-59 */ #define CFG_GPIO1_HWVER_SHIFT 4 diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c index 350af48..90d9309 100644 --- a/board/esd/pmc440/cmd_pmc440.c +++ b/board/esd/pmc440/cmd_pmc440.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Matthias Fuchs, esd Gmbh, matthias.fuchs@esd-electronics.com. * * See file CREDITS for list of people who contributed to this @@ -21,7 +21,6 @@ * MA 02111-1307 USA * */ - #include <common.h> #include <command.h> #include <asm/io.h> @@ -31,7 +30,8 @@ #include "pmc440.h" int is_monarch(void); -int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); +int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, + uchar *buffer, unsigned cnt); int eeprom_write_enable(unsigned dev_addr, int state); DECLARE_GLOBAL_DATA_PTR; @@ -64,7 +64,6 @@ int fpga_interrupt(u32 arg) return rc; } - int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; @@ -100,7 +99,6 @@ U_BOOT_CMD( NULL ); - void dump_fifo(pmc440_fpga_t *fpga, int f, int *n) { u32 ctrl; @@ -117,7 +115,6 @@ void dump_fifo(pmc440_fpga_t *fpga, int f, int *n) } } - int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; @@ -200,7 +197,8 @@ int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) got_fifoirq = 0; /* unmask global fifo irq */ FPGA_OUT32(&fpga->hostctrl, - HOSTCTRL_FIFOIE_GATE | HOSTCTRL_FIFOIE_FLAG); + HOSTCTRL_FIFOIE_GATE | + HOSTCTRL_FIFOIE_FLAG); } } @@ -237,7 +235,8 @@ int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) for (i=0; i<n; i++) FPGA_OUT32(&fpga->fifo[f].data, data); } else { - printf("writing %d x %08x to fifo port at address %08x\n", + printf("writing %d x %08x to fifo port at " + "address %08x\n", n, data, f); for (i=0; i<n; i++) out32(f, data); @@ -263,10 +262,10 @@ U_BOOT_CMD( " - without arguments: print all fifo's status\n" " - with 'wait' argument: interrupt driven read from all fifos\n" " - with 'read' argument: read current contents from all fifos\n" - " - with 'write' argument: write 'data' 'cnt' times to 'fifo' or 'address'\n" + " - with 'write' argument: write 'data' 'cnt' times to " + "'fifo' or 'address'\n" ); - int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { ulong sdsdp[5]; @@ -301,10 +300,12 @@ int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] sdsdp[2]=0x40082350; sdsdp[3]=0x0d050000; } else if (!strcmp(argv[1], "test")) { - /* TODO: this will replace the 667 MHz config above. + /* + * TODO: this will replace the 667 MHz config above. * But it needs some more testing on a real 667 MHz CPU. */ - printf("Bootstrapping for test (667MHz PLB=133PLB PLB/PCI=3)\n"); + printf("Bootstrapping for test" + " (667MHz PLB=133PLB PLB/PCI=3)\n"); sdsdp[0]=0x8778a256; sdsdp[1]=0x095fa030; sdsdp[2]=0x40082350; @@ -347,7 +348,6 @@ U_BOOT_CMD( "<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]" ); - #if defined(CONFIG_PRAM) #include <environment.h> extern env_t *env_ptr; @@ -394,7 +394,6 @@ U_BOOT_CMD( ); #endif /* CONFIG_PRAM */ - int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { if (argc > 1) { @@ -423,7 +422,6 @@ U_BOOT_CMD( NULL ); - int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; @@ -444,7 +442,8 @@ int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /* deassert */ printf("PMC-RESETOUT# deasserted\n"); FPGA_OUT32(&fpga->hostctrl, - HOSTCTRL_PMCRSTOUT_GATE | HOSTCTRL_PMCRSTOUT_FLAG); + HOSTCTRL_PMCRSTOUT_GATE | + HOSTCTRL_PMCRSTOUT_FLAG); } } else { printf("PMC-RESETOUT# is %s\n", @@ -460,7 +459,6 @@ U_BOOT_CMD( NULL ); - int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { if (is_monarch()) { @@ -481,7 +479,9 @@ int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) in_be32((void*)GPIO1_TCR) & ~GPIO1_INTA_FAKE); } } else { - printf("inta# is %s\n", in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ? "active" : "inactive"); + printf("inta# is %s\n", + in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ? + "active" : "inactive"); } return 0; } @@ -491,7 +491,6 @@ U_BOOT_CMD( NULL ); - /* test-only */ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -503,11 +502,17 @@ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) pciaddr &= 0xf0000000; /* map PCI address at 0xc0000000 in PLB space */ - out32r(PCIX0_PMM1MA, 0x00000000); /* PMM1 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM1LA, 0xc0000000); /* PMM1 Local Address */ - out32r(PCIX0_PMM1PCILA, pciaddr); /* PMM1 PCI Low Address */ - out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM1 PCI High Address */ - out32r(PCIX0_PMM1MA, 0xf0000001); /* 256MB + No prefetching, and enable region */ + + /* PMM1 Mask/Attribute - disabled b4 setting */ + out32r(PCIX0_PMM1MA, 0x00000000); + /* PMM1 Local Address */ + out32r(PCIX0_PMM1LA, 0xc0000000); + /* PMM1 PCI Low Address */ + out32r(PCIX0_PMM1PCILA, pciaddr); + /* PMM1 PCI High Address */ + out32r(PCIX0_PMM1PCIHA, 0x00000000); + /* 256MB + No prefetching, and enable region */ + out32r(PCIX0_PMM1MA, 0xf0000001); } else { printf("Usage:\npmm %s\n", cmdtp->help); } diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index edf3a14..5b811bb 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com. * Based on board/amcc/sequoia/sequoia.c * @@ -32,6 +32,7 @@ #include <ppc440.h> #include <asm/processor.h> #include <asm/io.h> +#include <asm/bitops.h> #include <command.h> #include <i2c.h> #ifdef CONFIG_RESET_PHY_R @@ -43,12 +44,12 @@ DECLARE_GLOBAL_DATA_PTR; -extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ ulong flash_get_size(ulong base, int banknum); int pci_is_66mhz(void); -int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); - +int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset, + uchar *buffer, unsigned cnt); struct serial_device *default_serial_console(void) { @@ -70,7 +71,8 @@ struct serial_device *default_serial_console(void) /* mark scratchreg valid */ scratchreg = (scratchreg & 0xffffff00) | 0x80; - i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR, 0x10, buf, 4); + i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR, + 0x10, buf, 4); if ((i != -1) && (buf[0] == 0x19) && (buf[1] == 0x75)) { scratchreg |= buf[2]; @@ -99,10 +101,10 @@ int board_early_init_f(void) mtdcr(ebccfga, xbcfg); mtdcr(ebccfgd, 0xf8400000); - /*-------------------------------------------------------------------- + /* * Setup the GPIO pins * TODO: setup GPIOs via CFG_4xx_GPIO_TABLE in board's config file - *-------------------------------------------------------------------*/ + */ out32(GPIO0_OR, 0x40000002); out32(GPIO0_TCR, 0x4c90011f); out32(GPIO0_OSRL, 0x28011400); @@ -141,9 +143,9 @@ int board_early_init_f(void) mtspr(dbcr0, 0x20000000); /* do chip reset */ } - /*-------------------------------------------------------------------- + /* * Setup the interrupt controller polarities, triggers, etc. - *-------------------------------------------------------------------*/ + */ mtdcr(uic0sr, 0xffffffff); /* clear all */ mtdcr(uic0er, 0x00000000); /* disable all */ mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ @@ -170,9 +172,11 @@ int board_early_init_f(void) /* select Ethernet pins */ mfsdr(SDR0_PFC1, sdr0_pfc1); - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4; + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | + SDR0_PFC1_SELECT_CONFIG_4; mfsdr(SDR0_PFC2, sdr0_pfc2); - sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4; + sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | + SDR0_PFC2_SELECT_CONFIG_4; /* enable 2nd IIC */ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL; @@ -192,9 +196,9 @@ int board_early_init_f(void) return 0; } -/*---------------------------------------------------------------------------+ - | misc_init_r. - +---------------------------------------------------------------------------*/ +/* + * misc_init_r. + */ int misc_init_r(void) { uint pbcr; @@ -221,32 +225,7 @@ int misc_init_r(void) mtdcr(ebccfga, pb0cr); #endif pbcr = mfdcr(ebccfgd); - switch (gd->bd->bi_flashsize) { - case 1 << 20: - size_val = 0; - break; - case 2 << 20: - size_val = 1; - break; - case 4 << 20: - size_val = 2; - break; - case 8 << 20: - size_val = 3; - break; - case 16 << 20: - size_val = 4; - break; - case 32 << 20: - size_val = 5; - break; - case 64 << 20: - size_val = 6; - break; - case 128 << 20: - size_val = 7; - break; - } + size_val = ffs(gd->bd->bi_flashsize) - 21; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) mtdcr(ebccfga, pb2cr); @@ -286,20 +265,22 @@ int misc_init_r(void) mfsdr(SDR0_USB2H0CR, usb2h0cr); usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; - /* An 8-bit/60MHz interface is the only possible alternative - when connecting the Device to the PHY */ + /* + * An 8-bit/60MHz interface is the only possible alternative + * when connecting the Device to the PHY + */ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; - usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/ + usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK; @@ -309,7 +290,7 @@ int misc_init_r(void) mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); mtsdr(SDR0_USB2H0CR, usb2h0cr); - /*clear resets*/ + /* clear resets */ udelay(1000); mtsdr(SDR0_SRST1, 0x00000000); udelay(1000); @@ -317,18 +298,18 @@ int misc_init_r(void) printf("USB: Host\n"); - } else if ((strcmp(act, "dev") == 0) || (in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) { - /*-------------------PATCH-------------------------------*/ + } else if ((strcmp(act, "dev") == 0) || + (in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) { mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); udelay (1000); @@ -344,7 +325,6 @@ int misc_init_r(void) udelay (1000); mtsdr(SDR0_SRST1, 0x60306000); - /*-------------------PATCH-------------------------------*/ /* SDR Setting */ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); @@ -353,23 +333,23 @@ int misc_init_r(void) mfsdr(SDR0_PFC1, sdr0_pfc1); usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; - usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0*/ + usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK; - sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1*/ + sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; mtsdr(SDR0_USB2H0CR, usb2h0cr); mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); @@ -453,43 +433,42 @@ void pmc440_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) } #endif -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. +/* + * pci_pre_init * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. * - ************************************************************************/ + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + */ #if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long addr; - /*-------------------------------------------------------------------------+ - | Set priority for all PLB3 devices to 0. - | Set PLB3 arbiter to fair mode. - +-------------------------------------------------------------------------*/ + /* + * Set priority for all PLB3 devices to 0. + * Set PLB3 arbiter to fair mode. + */ mfsdr(sdr_amp1, addr); mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); addr = mfdcr(plb3_acr); mtdcr(plb3_acr, addr | 0x80000000); - /*-------------------------------------------------------------------------+ - | Set priority for all PLB4 devices to 0. - +-------------------------------------------------------------------------*/ + /* + * Set priority for all PLB4 devices to 0. + */ mfsdr(sdr_amp0, addr); mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ mtdcr(plb4_acr, addr); - /*-------------------------------------------------------------------------+ - | Set Nebula PLB4 arbiter to fair mode. - +-------------------------------------------------------------------------*/ + /* + * Set Nebula PLB4 arbiter to fair mode. + */ /* Segment0 */ addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; @@ -512,64 +491,84 @@ int pci_pre_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. +/* + * pci_target_init * - ************************************************************************/ + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + */ #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { - /*--------------------------------------------------------------------------+ + char *ptmla_str, *ptmms_str; + + /* * Set up Direct MMIO registers - *--------------------------------------------------------------------------*/ - /*--------------------------------------------------------------------------+ - | PowerPC440EPX PCI Master configuration. - | Map one 1Gig range of PLB/processor addresses to PCI memory space. - | PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF - | Use byte reversed out routines to handle endianess. - | Make this region non-prefetchable. - +--------------------------------------------------------------------------*/ - out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + */ + /* + * PowerPC440EPX PCI Master configuration. + * Map one 1Gig range of PLB/processor addresses to PCI memory space. + * PLB address 0x80000000-0xBFFFFFFF + * ==> PCI address 0x80000000-0xBFFFFFFF + * Use byte reversed out routines to handle endianess. + * Make this region non-prefetchable. + */ + out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ + /* - disabled b4 setting */ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM0MA, 0xc0000001); /* 1G + No prefetching, and enable region */ + out32r(PCIX0_PMM0MA, 0xc0000001); /* 1G + No prefetching, */ + /* and enable region */ if (!is_monarch()) { - /* BAR1: top 64MB of RAM */ - out32r(PCIX0_PTM1MS, 0xfc000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0x0c000000); /* Local Addr. Reg */ + ptmla_str = getenv("ptm1la"); + ptmms_str = getenv("ptm1ms"); + if(NULL != ptmla_str && NULL != ptmms_str ) { + out32r(PCIX0_PTM1MS, + simple_strtoul(ptmms_str, NULL, 16)); + out32r(PCIX0_PTM1LA, + simple_strtoul(ptmla_str, NULL, 16)); + } else { + /* BAR1: default top 64MB of RAM */ + out32r(PCIX0_PTM1MS, 0xfc000001); + out32r(PCIX0_PTM1LA, 0x0c000000); + } } else { - /* BAR1: complete 256MB RAM (TODO: make dynamic) */ - out32r(PCIX0_PTM1MS, 0xf0000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0x00000000); /* Local Addr. Reg */ + /* BAR1: default: complete 256MB RAM */ + out32r(PCIX0_PTM1MS, 0xf0000001); + out32r(PCIX0_PTM1LA, 0x00000000); } - /* BAR2: 16 MB FPGA registers */ - out32r(PCIX0_PTM2MS, 0xff000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM2LA, 0xef000000); /* Local Addr. Reg */ + ptmla_str = getenv("ptm2la"); /* Local Addr. Reg */ + ptmms_str = getenv("ptm2ms"); /* Memory Size/Attribute */ + if(NULL != ptmla_str && NULL != ptmms_str ) { + out32r(PCIX0_PTM2MS, simple_strtoul(ptmms_str, NULL, 16)); + out32r(PCIX0_PTM2LA, simple_strtoul(ptmla_str, NULL, 16)); + } else { + /* BAR2: default: 16 MB FPGA + registers */ + out32r(PCIX0_PTM2MS, 0xff000001); /* Memory Size/Attribute */ + out32r(PCIX0_PTM2LA, 0xef000000); /* Local Addr. Reg */ + } if (is_monarch()) { /* BAR2: map FPGA registers behind system memory at 1GB */ pci_write_config_dword(0, PCI_BASE_ADDRESS_2, 0x40000008); } - /*--------------------------------------------------------------------------+ + /* * Set up Configuration registers - *--------------------------------------------------------------------------*/ + */ /* Program the board's vendor id */ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, CFG_PCI_SUBSYS_VENDORID); -#if 0 /* disabled for PMC405 backward compatibility */ + /* disabled for PMC405 backward compatibility */ /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); -#endif + /* pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); */ + /* 240nS PCI clock */ pci_write_config_word(0, PCI_LATENCY_TIMER, 1); @@ -587,8 +586,10 @@ void pci_target_init(struct pci_controller *hose) CFG_PCI_CLASSCODE_NONMONARCH); /* PCI configuration done: release ERREADY */ - out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_PPC_EREADY); - out_be32((void*)GPIO1_TCR, in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY); + out_be32((void*)GPIO1_OR, + in_be32((void*)GPIO1_OR) | GPIO1_PPC_EREADY); + out_be32((void*)GPIO1_TCR, + in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY); } else { /* Program the board's subsystem id/classcode */ pci_write_config_word(0, PCI_SUBSYSTEM_ID, @@ -599,20 +600,19 @@ void pci_target_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ -/************************************************************************* - * pci_master_init - * - ************************************************************************/ +/* + * pci_master_init + */ #if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { unsigned short temp_short; - /*--------------------------------------------------------------------------+ - | Write the PowerPC440 EP PCI Configuration regs. - | Enable PowerPC440 EP to be a master on the PCI bus (PMM). - | Enable PowerPC440 EP to act as a PCI memory target (PTM). - +--------------------------------------------------------------------------*/ + /* + * Write the PowerPC440 EP PCI Configuration regs. + * Enable PowerPC440 EP to be a master on the PCI bus (PMM). + * Enable PowerPC440 EP to act as a PCI memory target (PTM). + */ if (is_monarch()) { pci_read_config_word(0, PCI_COMMAND, &temp_short); pci_write_config_word(0, PCI_COMMAND, @@ -622,7 +622,6 @@ void pci_master_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ - static void wait_for_pci_ready(void) { int i; @@ -649,22 +648,19 @@ static void wait_for_pci_ready(void) } } - -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. +/* + * is_pci_host * - * Return 0 for adapter mode, non-zero for host (monarch) mode. + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. * - ************************************************************************/ + * Return 0 for adapter mode, non-zero for host (monarch) mode. + */ #if defined(CONFIG_PCI) int is_pci_host(struct pci_controller *hose) { @@ -681,6 +677,7 @@ int is_pci_host(struct pci_controller *hose) return 0; } #endif /* defined(CONFIG_PCI) */ + #if defined(CONFIG_POST) /* * Returns 1 if keys pressed to start the power-on long-running tests @@ -692,7 +689,6 @@ int post_hotkeys_pressed(void) } #endif /* CONFIG_POST */ - #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { @@ -713,17 +709,19 @@ void reset_phy(void) #endif #if defined(CFG_EEPROM_WREN) -/* Input: <dev_addr> I2C address of EEPROM device to enable. - * <state> -1: deliver current state +/* + * Input: <dev_addr> I2C address of EEPROM device to enable. + * <state> -1: deliver current state * 0: disable write * 1: enable write - * Returns: -1: wrong device address - * 0: dis-/en- able done + * Returns: -1: wrong device address + * 0: dis-/en- able done * 0/1: current state if <state> was -1. */ int eeprom_write_enable(unsigned dev_addr, int state) { - if ((CFG_I2C_EEPROM_ADDR != dev_addr) && (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) { + if ((CFG_I2C_EEPROM_ADDR != dev_addr) && + (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) { return -1; } else { switch (state) { @@ -747,9 +745,9 @@ int eeprom_write_enable(unsigned dev_addr, int state) } #endif /* #if defined(CFG_EEPROM_WREN) */ - #define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3 -int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt) +int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, + uchar *buffer, unsigned cnt) { unsigned end = offset + cnt; unsigned blk_off; @@ -758,7 +756,8 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, un #if defined(CFG_EEPROM_WREN) eeprom_write_enable(dev_addr, 1); #endif - /* Write data until done or would cross a write page boundary. + /* + * Write data until done or would cross a write page boundary. * We must write the address again when changing pages * because the address counter only increments within a page. */ @@ -780,7 +779,8 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, un #define BOOT_EEPROM_PAGE_SIZE (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS) #define BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1)) - maxlen = BOOT_EEPROM_PAGE_SIZE - BOOT_EEPROM_PAGE_OFFSET(blk_off); + maxlen = BOOT_EEPROM_PAGE_SIZE - + BOOT_EEPROM_PAGE_OFFSET(blk_off); if (maxlen > I2C_RXTX_LEN) maxlen = I2C_RXTX_LEN; @@ -803,14 +803,15 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, un return rcode; } - -int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt) +int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset, + uchar *buffer, unsigned cnt) { unsigned end = offset + cnt; unsigned blk_off; int rcode = 0; - /* Read data until done or would cross a page boundary. + /* + * Read data until done or would cross a page boundary. * We must write the address again when changing pages * because the next page may be in a different device. */ @@ -844,7 +845,6 @@ int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, un return rcode; } - #if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_BOARD_INIT) int usb_board_init(void) { @@ -854,7 +854,8 @@ int usb_board_init(void) if ((act == NULL || strcmp(act, "hostdev") == 0) && !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) /* enable power on USB socket */ - out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N); + out_be32((void*)GPIO1_OR, + in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N); for (i=0; i<1000; i++) udelay(1000); diff --git a/board/freescale/m5275evb/Makefile b/board/freescale/m5275evb/Makefile new file mode 100644 index 0000000..9a0fa80 --- /dev/null +++ b/board/freescale/m5275evb/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o mii.o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/r5200/config.mk b/board/freescale/m5275evb/config.mk index 8fc5319..ccb2cf7 100644 --- a/board/r5200/config.mk +++ b/board/freescale/m5275evb/config.mk @@ -22,4 +22,4 @@ # MA 02111-1307 USA # -TEXT_BASE = 0x10000000 +TEXT_BASE = 0xffe00000 diff --git a/board/freescale/m5275evb/m5275evb.c b/board/freescale/m5275evb/m5275evb.c new file mode 100644 index 0000000..a1b2902 --- /dev/null +++ b/board/freescale/m5275evb/m5275evb.c @@ -0,0 +1,112 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2005-2008 Arthur Shipkowski (art@videon-central.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/immap.h> + +#define PERIOD 13 /* system bus period in ns */ +#define SDRAM_TREFI 7800 /* in ns */ + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale MCF5275 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile sdramctrl_t *sdp = (sdramctrl_t *)(MMAP_SDRAM); + volatile gpio_t *gpio_reg = (gpio_t *)(MMAP_GPIO); + + gpio_reg->par_sdram = 0x3FF; /* Enable SDRAM */ + + /* Set up chip select */ + sdp->sdbar0 = CFG_SDRAM_BASE; + sdp->sdbmr0 = MCF_SDRAMC_SDMRn_BAM_32M | MCF_SDRAMC_SDMRn_V; + + /* Set up timing */ + sdp->sdcfg1 = 0x83711630; + sdp->sdcfg2 = 0x46770000; + + /* Enable clock */ + sdp->sdcr = MCF_SDRAMC_SDCR_MODE_EN | MCF_SDRAMC_SDCR_CKE; + + /* Set precharge */ + sdp->sdcr |= MCF_SDRAMC_SDCR_IPALL; + + /* Dummy write to start SDRAM */ + *((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696; + + /* Send LEMR */ + sdp->sdmr = MCF_SDRAMC_SDMR_BNKAD_LEMR + | MCF_SDRAMC_SDMR_AD(0x0) + | MCF_SDRAMC_SDMR_CMD; + *((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696; + + /* Send LMR */ + sdp->sdmr = 0x058d0000; + *((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696; + + /* Stop sending commands */ + sdp->sdmr &= ~(MCF_SDRAMC_SDMR_CMD); + + /* Set precharge */ + sdp->sdcr |= MCF_SDRAMC_SDCR_IPALL; + *((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696; + + /* Stop manual precharge, send 2 IREF */ + sdp->sdcr &= ~(MCF_SDRAMC_SDCR_IPALL); + sdp->sdcr |= MCF_SDRAMC_SDCR_IREF; + *((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696; + *((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696; + + /* Write mode register, clear reset DLL */ + sdp->sdmr = 0x018d0000; + *((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696; + + /* Stop sending commands */ + sdp->sdmr &= ~(MCF_SDRAMC_SDMR_CMD); + sdp->sdcr &= ~(MCF_SDRAMC_SDCR_MODE_EN); + + /* Turn on auto refresh, lock SDMR */ + sdp->sdcr = + MCF_SDRAMC_SDCR_CKE + | MCF_SDRAMC_SDCR_REF + | MCF_SDRAMC_SDCR_MUX(1) + /* 1 added to round up */ + | MCF_SDRAMC_SDCR_RCNT((SDRAM_TREFI/(PERIOD*64)) - 1 + 1) + | MCF_SDRAMC_SDCR_DQS_OE(0x3); + + return CFG_SDRAM_SIZE * 1024 * 1024; +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} diff --git a/board/r5200/mii.c b/board/freescale/m5275evb/mii.c index 706c90f..bbc93f6 100644 --- a/board/r5200/mii.c +++ b/board/freescale/m5275evb/mii.c @@ -36,10 +36,26 @@ DECLARE_GLOBAL_DATA_PTR; int fecpin_setclear(struct eth_device *dev, int setclear) { + struct fec_info_s *info = (struct fec_info_s *) dev->priv; + volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO; + if (setclear) { /* Enable Ethernet pins */ - mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C); + if (info->iobase == CFG_FEC0_IOBASE) { + gpio->par_feci2c |= 0x0F00; + gpio->par_fec0hl |= 0xC0; + } else { + gpio->par_feci2c |= 0x00A0; + gpio->par_fec1hl |= 0xC0; + } } else { + if (info->iobase == CFG_FEC0_IOBASE) { + gpio->par_feci2c &= ~0x0F00; + gpio->par_fec0hl &= ~0xC0; + } else { + gpio->par_feci2c &= ~0x00A0; + gpio->par_fec1hl &= ~0xC0; + } } return 0; @@ -131,7 +147,7 @@ uint mii_send(uint mii_cmd) return (mii_reply & 0xffff); /* data read from phy */ } -#endif /* CFG_DISCOVER_PHY || (CONFIG_CMD_MII) */ +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */ #if defined(CFG_DISCOVER_PHY) int mii_discover_phy(struct eth_device *dev) @@ -200,7 +216,7 @@ int mii_discover_phy(struct eth_device *dev) } #endif /* CFG_DISCOVER_PHY */ -int mii_init(void) __attribute__((weak,alias("__mii_init"))); +void mii_init(void) __attribute__((weak,alias("__mii_init"))); void __mii_init(void) { diff --git a/board/freescale/m5275evb/u-boot.lds b/board/freescale/m5275evb/u-boot.lds new file mode 100644 index 0000000..43d6500 --- /dev/null +++ b/board/freescale/m5275evb/u-boot.lds @@ -0,0 +1,141 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf52x2/start.o (.text) + common/dlmalloc.o (.text) + lib_generic/string.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o(.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m54455evb/flash.c b/board/freescale/m54455evb/flash.c index de2cca8..6b50e8d 100644 --- a/board/freescale/m54455evb/flash.c +++ b/board/freescale/m54455evb/flash.c @@ -95,6 +95,11 @@ typedef volatile unsigned char FLASH_PORT_WIDTHV; #define FLASH_28F256P30T 0x00BD /* Intel 28F256P30T ( 256M = 16M x 16 ) */ #define FLASH_28F256P30B 0x00BE /* Intel 28F256P30B ( 256M = 16M x 16 ) */ +#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) +#define STM_ID_M25P16 0x20152015 +#define FLASH_M25P16 0x0055 +#endif + #define SYNC __asm__("nop") /*----------------------------------------------------------------------- @@ -111,6 +116,12 @@ void inline spin_wheel(void); void flash_sync_real_protect(flash_info_t * info); uchar intel_sector_protected(flash_info_t * info, ushort sector); +#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) +int write_ser_data(flash_info_t * info, ulong dest, uchar * data, ulong cnt); +int serial_flash_read_status(int chipsel); +static int ser_flash_cs = 0; +#endif + flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; ulong flash_init(void) @@ -119,6 +130,10 @@ ulong flash_init(void) ulong size = 0; ulong fbase = 0; +#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) + dspi_init(); +#endif + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { memset(&flash_info[i], 0, sizeof(flash_info_t)); @@ -129,6 +144,11 @@ ulong flash_init(void) case 1: fbase = (ulong) CFG_FLASH1_BASE; break; +#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) + case 2: + fbase = (ulong) CFG_FLASH2_BASE; + break; +#endif } flash_get_size((FPWV *) fbase, &flash_info[i]); @@ -152,7 +172,6 @@ int flash_get_offsets(ulong base, flash_info_t * info) { int i, j, k; int sectors, bs, banks; - ulong start; if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_ATM) { int sect[] = CFG_ATMEL_SECT; @@ -196,6 +215,15 @@ int flash_get_offsets(ulong base, flash_info_t * info) *addr16 = (FPW) INTEL_RESET; /* restore read mode */ } +#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_STM) { + info->start[0] = CFG_FLASH2_BASE; + for (k = 0, i = 0; i < CFG_STM_SECT; i++, k++) { + info->start[k + 1] = info->start[k] + CFG_STM_SECTSZ; + info->protect[k] = 0; + } + } +#endif return ERR_OK; } @@ -211,6 +239,11 @@ void flash_print_info(flash_info_t * info) case FLASH_MAN_ATM: printf("ATMEL "); break; +#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) + case FLASH_MAN_STM: + printf("ST "); + break; +#endif default: printf("Unknown Vendor "); break; @@ -221,8 +254,13 @@ void flash_print_info(flash_info_t * info) printf("AT49BV040A\n"); break; case FLASH_28F128J3A: - printf("Intel 28F128J3A\n"); + printf("28F128J3A\n"); + break; +#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) + case FLASH_M25P16: + printf("M25P16\n"); break; +#endif default: printf("Unknown Chip Type\n"); return; @@ -267,6 +305,45 @@ ulong flash_get_size(FPWV * addr, flash_info_t * info) u16 value; int i; +#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) + if ((ulong) addr == CFG_FLASH2_BASE) { + int manufactId = 0; + int deviceId = 0; + + ser_flash_cs = 1; + + dspi_tx(ser_flash_cs, 0x80, SER_RDID); + dspi_tx(ser_flash_cs, 0x80, 0); + dspi_tx(ser_flash_cs, 0x80, 0); + dspi_tx(ser_flash_cs, 0x80, 0); + + dspi_rx(); + manufactId = dspi_rx(); + deviceId = dspi_rx() << 8; + deviceId |= dspi_rx(); + + dspi_tx(ser_flash_cs, 0x00, 0); + dspi_rx(); + + switch (manufactId) { + case (u8) STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; + } + + switch (deviceId) { + case (u16) STM_ID_M25P16: + info->flash_id += FLASH_M25P16; + break; + } + + info->sector_count = CFG_STM_SECT; + info->size = CFG_STM_SECT * CFG_STM_SECTSZ; + + return (info->size); + } +#endif + addr[FLASH_CYCLE1] = (FPWV) 0x00AA00AA; /* for Atmel, Intel ignores this */ addr[FLASH_CYCLE2] = (FPWV) 0x00550055; /* for Atmel, Intel ignores this */ addr[FLASH_CYCLE1] = (FPWV) 0x00900090; /* selects Intel or Atmel */ @@ -383,6 +460,21 @@ int flash_cmd_rd(volatile u16 * addr, int index) return (int)addr[index]; } +#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) +int serial_flash_read_status(int chipsel) +{ + u16 status; + + dspi_tx(chipsel, 0x80, SER_RDSR); + dspi_rx(); + + dspi_tx(chipsel, 0x00, 0); + status = dspi_rx(); + + return status; +} +#endif + /* * This function gets the u-boot flash sector protection status * (flash_info_t.protect[]) in sync with the sector protection @@ -462,8 +554,11 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; ulong type, start, last; - int rcode = 0, intel = 0; - + int rcode = 0, flashtype = 0; +#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) + int count; + u16 status; +#endif if ((s_first < 0) || (s_first > s_last)) { if (info->flash_id == FLASH_UNKNOWN) printf("- missing\n"); @@ -474,19 +569,25 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) type = (info->flash_id & FLASH_VENDMASK); - if (type != (FLASH_MAN_INTEL & FLASH_VENDMASK)) { - if (type != (FLASH_MAN_ATM & FLASH_VENDMASK)) { - type = (info->flash_id & FLASH_VENDMASK); - printf - ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } + switch (type) { + case FLASH_MAN_ATM: + flashtype = 1; + break; + case FLASH_MAN_INTEL: + flashtype = 2; + break; +#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) + case FLASH_MAN_STM: + flashtype = 3; + break; +#endif + default: + type = (info->flash_id & FLASH_VENDMASK); + printf("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; } - if (type == FLASH_MAN_INTEL) - intel = 1; - prot = 0; for (sect = s_first; sect <= s_last; ++sect) { if (info->protect[sect]) { @@ -503,6 +604,51 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) start = get_timer(0); last = start; +#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) + /* Perform bulk erase */ + if (flashtype == 3) { + if ((s_last - s_first) == (CFG_STM_SECT - 1)) { + if (prot == 0) { + dspi_tx(ser_flash_cs, 0x00, SER_WREN); + dspi_rx(); + + status = serial_flash_read_status(ser_flash_cs); + if (((status & 0x9C) != 0) + && ((status & 0x02) != 0x02)) { + printf("Can't erase flash\n"); + return 1; + } + + dspi_tx(ser_flash_cs, 0x00, SER_BULK_ERASE); + dspi_rx(); + + count = 0; + start = get_timer(0); + do { + status = + serial_flash_read_status + (ser_flash_cs); + + if (count++ > 0x10000) { + spin_wheel(); + count = 0; + } + + if (get_timer(start) > + CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + return 1; + } + } while (status & 0x01); + + printf("\b. done\n"); + return 0; + } else if (prot == CFG_STM_SECT) { + return 1; + } + } + } +#endif /* Start erase on unprotected sectors */ for (sect = s_first; sect <= s_last; sect++) { if (info->protect[sect] == 0) { /* not protected */ @@ -515,65 +661,116 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) /* arm simple, non interrupt dependent timer */ start = get_timer(0); - if (intel) { - *addr = (FPW) INTEL_READID; - min = addr[INTEL_CFI_TERB] & 0xff; - min = 1 << min; /* ms */ - min = (min / info->sector_count) * 1000; - - /* start erase block */ - *addr = (FPW) INTEL_CLEAR; /* clear status register */ - *addr = (FPW) INTEL_ERASE; /* erase setup */ - *addr = (FPW) INTEL_CONFIRM; /* erase confirm */ - - while ((*addr & (FPW) INTEL_FINISHED) != - (FPW) INTEL_FINISHED) { - - if (get_timer(start) > - CFG_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - *addr = (FPW) INTEL_SUSERASE; /* suspend erase */ - *addr = (FPW) INTEL_RESET; /* reset to read mode */ - - rcode = 1; - break; + switch (flashtype) { + case 1: + { + FPWV *base; /* first address in bank */ + FPWV *atmeladdr; + + flag = disable_interrupts(); + + atmeladdr = (FPWV *) addr; /* concatenate to 8 bit */ + base = (FPWV *) (CFG_ATMEL_BASE); /* First sector */ + + base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ + base[FLASH_CYCLE1] = (u8) 0x00800080; /* erase mode */ + base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ + *atmeladdr = (u8) 0x00300030; /* erase sector */ + + if (flag) + enable_interrupts(); + + while ((*atmeladdr & (u8) 0x00800080) != + (u8) 0x00800080) { + if (get_timer(start) > + CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */ + + rcode = 1; + break; + } } - } - - *addr = (FPW) INTEL_RESET; /* resest to read mode */ - } else { - FPWV *base; /* first address in bank */ - FPWV *atmeladdr; - - flag = disable_interrupts(); - atmeladdr = (FPWV *) addr; /* concatenate to 8 bit */ - base = (FPWV *) (CFG_ATMEL_BASE); /* First sector */ - - base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (u8) 0x00800080; /* erase mode */ - base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ - *atmeladdr = (u8) 0x00300030; /* erase sector */ + *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */ + break; + } - if (flag) - enable_interrupts(); + case 2: + { + *addr = (FPW) INTEL_READID; + min = addr[INTEL_CFI_TERB] & 0xff; + min = 1 << min; /* ms */ + min = (min / info->sector_count) * 1000; + + /* start erase block */ + *addr = (FPW) INTEL_CLEAR; /* clear status register */ + *addr = (FPW) INTEL_ERASE; /* erase setup */ + *addr = (FPW) INTEL_CONFIRM; /* erase confirm */ + + while ((*addr & (FPW) INTEL_FINISHED) != + (FPW) INTEL_FINISHED) { + + if (get_timer(start) > + CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + *addr = (FPW) INTEL_SUSERASE; /* suspend erase */ + *addr = (FPW) INTEL_RESET; /* reset to read mode */ + + rcode = 1; + break; + } + } - while ((*atmeladdr & (u8) 0x00800080) != - (u8) 0x00800080) { - if (get_timer(start) > - CFG_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */ + *addr = (FPW) INTEL_RESET; /* resest to read mode */ + break; + } - rcode = 1; - break; +#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) + case 3: + { + u8 sec = ((ulong) addr >> 16) & 0xFF; + + dspi_tx(ser_flash_cs, 0x00, SER_WREN); + dspi_rx(); + status = + serial_flash_read_status + (ser_flash_cs); + if (((status & 0x9C) != 0) + && ((status & 0x02) != 0x02)) { + printf("Error Programming\n"); + return 1; } - } - *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */ - } /* Atmel or Intel */ + dspi_tx(ser_flash_cs, 0x80, + SER_SECT_ERASE); + dspi_tx(ser_flash_cs, 0x80, sec); + dspi_tx(ser_flash_cs, 0x80, 0); + dspi_tx(ser_flash_cs, 0x00, 0); + + dspi_rx(); + dspi_rx(); + dspi_rx(); + dspi_rx(); + + do { + status = + serial_flash_read_status + (ser_flash_cs); + + if (get_timer(start) > + CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + return 1; + } + } while (status & 0x01); + + break; + } +#endif + } /* switch (flashtype) */ } } printf(" done\n"); @@ -583,6 +780,8 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) { + int count; + if (info->flash_id == FLASH_UNKNOWN) return 4; @@ -623,7 +822,7 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) { ulong cp, wp; u16 data; - int count, i, l, rc, port_width; + int i, l, rc, port_width; /* get lower word aligned address */ wp = addr; @@ -724,6 +923,51 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) } /* case FLASH_MAN_INTEL */ +#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) + case FLASH_MAN_STM: + { + ulong wp; + u8 *data = (u8 *) src; + int left; /* number of bytes left to program */ + + wp = addr; + + /* page align, each page is 256 bytes */ + if ((wp % 0x100) != 0) { + left = (0x100 - (wp & 0xFF)); + write_ser_data(info, wp, data, left); + cnt -= left; + wp += left; + data += left; + } + + /* page program - 256 bytes at a time */ + if (cnt > 255) { + count = 0; + while (cnt >= 0x100) { + write_ser_data(info, wp, data, 0x100); + cnt -= 0x100; + wp += 0x100; + data += 0x100; + + if (count++ > 0x400) { + spin_wheel(); + count = 0; + } + } + } + + /* remainint bytes */ + if (cnt && (cnt < 256)) { + write_ser_data(info, wp, data, cnt); + wp += cnt; + data += cnt; + cnt -= cnt; + } + + printf("\b."); + } +#endif } /* switch */ return ERR_OK; @@ -844,6 +1088,75 @@ int write_data(flash_info_t * info, ulong dest, FPW data) return (0); } +#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) +int write_ser_data(flash_info_t * info, ulong dest, uchar * data, ulong cnt) +{ + ulong start; + int status, i; + u8 flashdata; + + /* Check if Flash is (sufficiently) erased */ + dspi_tx(ser_flash_cs, 0x80, SER_READ); + dspi_tx(ser_flash_cs, 0x80, (dest >> 16) & 0xFF); + dspi_tx(ser_flash_cs, 0x80, (dest >> 8) & 0xFF); + dspi_tx(ser_flash_cs, 0x80, dest & 0xFF); + dspi_rx(); + dspi_rx(); + dspi_rx(); + dspi_rx(); + dspi_tx(ser_flash_cs, 0x80, 0); + flashdata = dspi_rx(); + dspi_tx(ser_flash_cs, 0x00, 0); + dspi_rx(); + + if ((flashdata & *data) != *data) { + printf("not erased at %08lx (%lx)\n", (ulong) dest, + (ulong) flashdata); + return (2); + } + + dspi_tx(ser_flash_cs, 0x00, SER_WREN); + dspi_rx(); + + status = serial_flash_read_status(ser_flash_cs); + if (((status & 0x9C) != 0) && ((status & 0x02) != 0x02)) { + printf("Error Programming\n"); + return 1; + } + + start = get_timer(0); + + dspi_tx(ser_flash_cs, 0x80, SER_PAGE_PROG); + dspi_tx(ser_flash_cs, 0x80, ((dest & 0xFF0000) >> 16)); + dspi_tx(ser_flash_cs, 0x80, ((dest & 0xFF00) >> 8)); + dspi_tx(ser_flash_cs, 0x80, (dest & 0xFF)); + dspi_rx(); + dspi_rx(); + dspi_rx(); + dspi_rx(); + + for (i = 0; i < (cnt - 1); i++) { + dspi_tx(ser_flash_cs, 0x80, *data); + dspi_rx(); + data++; + } + + dspi_tx(ser_flash_cs, 0x00, *data); + dspi_rx(); + + do { + status = serial_flash_read_status(ser_flash_cs); + + if (get_timer(start) > CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + return 1; + } + } while (status & 0x01); + + return (0); +} +#endif + /*----------------------------------------------------------------------- * Write a word to Flash for ATMEL FLASH * A word is 16 bits, whichever the bus width of the flash bank diff --git a/board/freescale/m547xevb/m547xevb.c b/board/freescale/m547xevb/m547xevb.c index 0286084..539da78 100644 --- a/board/freescale/m547xevb/m547xevb.c +++ b/board/freescale/m547xevb/m547xevb.c @@ -43,6 +43,9 @@ long int initdram(int board_type) volatile siu_t *siu = (siu_t *) (MMAP_SIU); volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); u32 dramsize, i; +#ifdef CFG_DRAMSZ1 + u32 temp; +#endif siu->drv = CFG_SDRAM_DRVSTRENGTH; diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c index 88d5e8f..afc0eee 100644 --- a/board/freescale/mpc8323erdb/mpc8323erdb.c +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -185,3 +185,37 @@ void ft_board_setup(void *blob, bd_t *bd) #endif } #endif + +#if defined(CFG_I2C_MAC_OFFSET) +int mac_read_from_eeprom(void) +{ + uchar buf[28]; + char str[18]; + int i = 0; + unsigned int crc = 0; + unsigned char enetvar[32]; + + /* Read MAC addresses from EEPROM */ + if (eeprom_read(CFG_I2C_EEPROM_ADDR, CFG_I2C_MAC_OFFSET, buf, 28)) { + printf("\nEEPROM @ 0x%02x read FAILED!!!\n", + CFG_I2C_EEPROM_ADDR); + } else { + if (crc32(crc, buf, 24) == *(unsigned int *)&buf[24]) { + printf("Reading MAC from EEPROM\n"); + for (i = 0; i < 4; i++) { + if (memcmp(&buf[i * 6], "\0\0\0\0\0\0", 6)) { + sprintf(str, + "%02X:%02X:%02X:%02X:%02X:%02X", + buf[i * 6], buf[i * 6 + 1], + buf[i * 6 + 2], buf[i * 6 + 3], + buf[i * 6 + 4], buf[i * 6 + 5]); + sprintf((char *)enetvar, + i ? "eth%daddr" : "ethaddr", i); + setenv((char *)enetvar, str); + } + } + } + } + return 0; +} +#endif /* CONFIG_I2C_MAC_OFFSET */ diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index d90cdb3..2119320 100644 --- a/board/freescale/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -98,11 +98,8 @@ int board_early_init_f(void) /* Enable flash write */ bcsr[0xa] &= ~0x04; - /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2 h/w bug workaround) */ - if (immr->sysconf.spridr == SPR_8360_REV20 || - immr->sysconf.spridr == SPR_8360E_REV20 || - immr->sysconf.spridr == SPR_8360_REV21 || - immr->sysconf.spridr == SPR_8360E_REV21) + /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2.x h/w bug workaround) */ + if (REVID_MAJOR(immr->sysconf.spridr) == 2) bcsr[0xe] = 0x30; /* Enable second UART */ @@ -308,8 +305,8 @@ void ft_board_setup(void *blob, bd_t *bd) * if on mpc8360ea rev. 2.1, * change both ucc phy-connection-types from rgmii-id to rgmii-rxid */ - if (immr->sysconf.spridr == SPR_8360_REV21 || - immr->sysconf.spridr == SPR_8360E_REV21) { + if ((REVID_MAJOR(immr->sysconf.spridr) == 2) && + (REVID_MINOR(immr->sysconf.spridr) == 1)) { int nodeoffset; const char *prop; int path; diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c index e57a53f..f7cd5fe 100644 --- a/board/freescale/mpc837xemds/mpc837xemds.c +++ b/board/freescale/mpc837xemds/mpc837xemds.c @@ -12,6 +12,8 @@ #include <common.h> #include <i2c.h> +#include <asm/io.h> +#include <asm/fsl_serdes.h> #include <spd_sdram.h> #if defined(CONFIG_OF_LIBFDT) #include <libfdt.h> @@ -29,6 +31,34 @@ int board_early_init_f(void) /* Clear all of the interrupt of BCSR */ bcsr[0xe] = 0xff; +#ifdef CONFIG_FSL_SERDES + immap_t *immr = (immap_t *)CFG_IMMR; + u32 spridr = in_be32(&immr->sysconf.spridr); + + /* we check only part num, and don't look for CPU revisions */ + switch (spridr) { + case SPR_8377: + fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + break; + case SPR_8378: + fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + break; + case SPR_8379: + fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + break; + default: + printf("serdes not configured: unknown CPU part number: " + "%04x\n", spridr >> 16); + break; + } +#endif /* CONFIG_FSL_SERDES */ return 0; } diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index 83fb60d..e054f4e 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -140,24 +140,21 @@ int board_early_init_f(void) u32 spridr = in_be32(&immr->sysconf.spridr); /* we check only part num, and don't look for CPU revisions */ - switch (spridr >> 16) { - case SPR_8379E_REV10 >> 16: - case SPR_8379_REV10 >> 16: + switch (PARTID_NO_E(spridr)) { + case SPR_8377: fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); - fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA, + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; - case SPR_8378E_REV10 >> 16: - case SPR_8378_REV10 >> 16: + case SPR_8378: fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; - case SPR_8377E_REV10 >> 16: - case SPR_8377_REV10 >> 16: + case SPR_8379: fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); - fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; default: diff --git a/board/imx31_litekit/Makefile b/board/imx31_litekit/Makefile new file mode 100644 index 0000000..aaaec69 --- /dev/null +++ b/board/imx31_litekit/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundatio; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := imx31_litekit.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +####################################################################### +## + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend diff --git a/board/imx31_litekit/config.mk b/board/imx31_litekit/config.mk new file mode 100644 index 0000000..d34dc02 --- /dev/null +++ b/board/imx31_litekit/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x87f00000 diff --git a/board/imx31_litekit/imx31_litekit.c b/board/imx31_litekit/imx31_litekit.c new file mode 100644 index 0000000..8c6e6f5 --- /dev/null +++ b/board/imx31_litekit/imx31_litekit.c @@ -0,0 +1,65 @@ +/* + * + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <common.h> +#include <asm/arch/mx31.h> +#include <asm/arch/mx31-regs.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} + +int board_init(void) +{ + __REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */ + __REG(CSCR_L(0)) = 0xa0330d01; + __REG(CSCR_A(0)) = 0x00220800; + + __REG(CSCR_U(4)) = 0x0000dcf6; /* CS4: Network Controller */ + __REG(CSCR_L(4)) = 0x444a4541; + __REG(CSCR_A(4)) = 0x44443302; + + /* setup pins for UART1 */ + mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX); + mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX); + mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); + mx31_gpio_mux(MUX_RTS1__UART1_CTS_B); + + gd->bd->bi_arch_number = 447; /* board id for linux */ + gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */ + + return 0; +} + +int checkboard(void) +{ + printf("Board: i.MX31 Litekit\n"); + return 0; +} diff --git a/board/imx31_litekit/lowlevel_init.S b/board/imx31_litekit/lowlevel_init.S new file mode 100644 index 0000000..74d6067 --- /dev/null +++ b/board/imx31_litekit/lowlevel_init.S @@ -0,0 +1,103 @@ +/* + * + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/mx31-regs.h> + +.macro REG reg, val + ldr r2, =\reg + ldr r3, =\val + str r3, [r2] +.endm + +.macro REG8 reg, val + ldr r2, =\reg + ldr r3, =\val + strb r3, [r2] +.endm + +.macro DELAY loops + ldr r2, =\loops +1: + subs r2, r2, #1 + nop + bcs 1b +.endm + +.globl lowlevel_init +lowlevel_init: + + REG IPU_CONF, IPU_CONF_DI_EN + REG CCM_CCMR, 0x074B0BF5 + + DELAY 0x40000 + + REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE + REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS + + REG CCM_PDR0, PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) | \ + PDR0_HSP_PODF(2) | PDR0_NFC_PODF(6) | \ + PDR0_IPG_PODF(1) | PDR0_MAX_PODF(2) | \ + PDR0_MCU_PODF(0) + + REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0x33) | PLL_MFI(7) | \ + PLL_MFN(0x23) + REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1) + + REG 0x43FAC26C, 0 /* SDCLK */ + REG 0x43FAC270, 0 /* CAS */ + REG 0x43FAC274, 0 /* RAS */ + REG 0x43FAC27C, 0x1000 /* CS2 CSD0) */ + REG 0x43FAC284, 0 /* DQM3 */ + /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */ + REG 0x43FAC288, 0 + REG 0x43FAC28C, 0 + REG 0x43FAC290, 0 + REG 0x43FAC294, 0 + REG 0x43FAC298, 0 + REG 0x43FAC29C, 0 + REG 0x43FAC2A0, 0 + REG 0x43FAC2A4, 0 + REG 0x43FAC2A8, 0 + REG 0x43FAC2AC, 0 + REG 0x43FAC2B0, 0 + REG 0x43FAC2B4, 0 + REG 0x43FAC2B8, 0 + REG 0x43FAC2BC, 0 + REG 0x43FAC2C0, 0 + REG 0x43FAC2C4, 0 + REG 0x43FAC2C8, 0 + REG 0x43FAC2CC, 0 + REG 0x43FAC2D0, 0 + REG 0x43FAC2D4, 0 + REG 0x43FAC2D8, 0 + REG 0x43FAC2DC, 0 + REG 0xB8001010, 0x00000004 + REG 0xB8001004, 0x006ac73a + REG 0xB8001000, 0x92100000 + REG 0x80000f00, 0x12344321 + REG 0xB8001000, 0xa2100000 + REG 0x80000000, 0x12344321 + REG 0x80000000, 0x12344321 + REG 0xB8001000, 0xb2100000 + REG8 0x80000033, 0xda + REG8 0x81000000, 0xff diff --git a/board/imx31_litekit/u-boot.lds b/board/imx31_litekit/u-boot.lds new file mode 100644 index 0000000..1460adc --- /dev/null +++ b/board/imx31_litekit/u-boot.lds @@ -0,0 +1,59 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm1136/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/imx31_phycore/Makefile b/board/imx31_phycore/Makefile new file mode 100644 index 0000000..de37cca --- /dev/null +++ b/board/imx31_phycore/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundatio; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := imx31_phycore.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend diff --git a/board/imx31_phycore/config.mk b/board/imx31_phycore/config.mk new file mode 100644 index 0000000..d34dc02 --- /dev/null +++ b/board/imx31_phycore/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x87f00000 diff --git a/board/imx31_phycore/imx31_phycore.c b/board/imx31_phycore/imx31_phycore.c new file mode 100644 index 0000000..85fdc25 --- /dev/null +++ b/board/imx31_phycore/imx31_phycore.c @@ -0,0 +1,73 @@ +/* + * + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <common.h> +#include <asm/arch/mx31.h> +#include <asm/arch/mx31-regs.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} + +int board_init(void) +{ + __REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */ + __REG(CSCR_L(0)) = 0x10000d03; + __REG(CSCR_A(0)) = 0x00720900; + + __REG(CSCR_U(1)) = 0x0000df06; /* CS1: Network Controller */ + __REG(CSCR_L(1)) = 0x444a4541; + __REG(CSCR_A(1)) = 0x44443302; + + __REG(CSCR_U(4)) = 0x0000d843; /* CS4: SRAM */ + __REG(CSCR_L(4)) = 0x22252521; + __REG(CSCR_A(4)) = 0x22220a00; + + /* setup pins for UART1 */ + mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX); + mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX); + mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); + mx31_gpio_mux(MUX_RTS1__UART1_CTS_B); + + /* setup pins for I2C2 (for EEPROM, RTC) */ + mx31_gpio_mux(MUX_CSPI2_MOSI__I2C2_SCL); + mx31_gpio_mux(MUX_CSPI2_MISO__I2C2_SCL); + + gd->bd->bi_arch_number = 447; /* board id for linux */ + gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */ + + return 0; +} + +int checkboard(void) +{ + printf("Board: Phytec phyCore i.MX31\n"); + return 0; +} diff --git a/board/imx31_phycore/lowlevel_init.S b/board/imx31_phycore/lowlevel_init.S new file mode 100644 index 0000000..b0a5389 --- /dev/null +++ b/board/imx31_phycore/lowlevel_init.S @@ -0,0 +1,105 @@ +/* + * + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/mx31-regs.h> + +.macro REG reg, val + ldr r2, =\reg + ldr r3, =\val + str r3, [r2] +.endm + +.macro REG8 reg, val + ldr r2, =\reg + ldr r3, =\val + strb r3, [r2] +.endm + +.macro DELAY loops + ldr r2, =\loops +1: + subs r2, r2, #1 + nop + bcs 1b +.endm + +.globl lowlevel_init +lowlevel_init: + + REG IPU_CONF, IPU_CONF_DI_EN + REG CCM_CCMR, 0x074B0BF5 + + DELAY 0x40000 + + REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE + REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS + + REG CCM_PDR0, PDR0_CSI_PODF(0xff1) | PDR0_PER_PODF(7) | \ + PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) | \ + PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) | \ + PDR0_MCU_PODF(0) + + REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0xe) | PLL_MFI(9) | PLL_MFN(0xd) + + REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(0x43) | PLL_MFI(12) | PLL_MFN(1) + + REG 0x43FAC26C, 0 /* SDCLK */ + REG 0x43FAC270, 0 /* CAS */ + REG 0x43FAC274, 0 /* RAS */ + REG 0x43FAC27C, 0x1000 /* CS2 CSD0) */ + REG 0x43FAC284, 0 /* DQM3 */ + /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */ + REG 0x43FAC288, 0 + REG 0x43FAC28C, 0 + REG 0x43FAC290, 0 + REG 0x43FAC294, 0 + REG 0x43FAC298, 0 + REG 0x43FAC29C, 0 + REG 0x43FAC2A0, 0 + REG 0x43FAC2A4, 0 + REG 0x43FAC2A8, 0 + REG 0x43FAC2AC, 0 + REG 0x43FAC2B0, 0 + REG 0x43FAC2B4, 0 + REG 0x43FAC2B8, 0 + REG 0x43FAC2BC, 0 + REG 0x43FAC2C0, 0 + REG 0x43FAC2C4, 0 + REG 0x43FAC2C8, 0 + REG 0x43FAC2CC, 0 + REG 0x43FAC2D0, 0 + REG 0x43FAC2D4, 0 + REG 0x43FAC2D8, 0 + REG 0x43FAC2DC, 0 + REG 0xB8001010, 0x00000004 + REG 0xB8001004, 0x006ac73a + REG 0xB8001000, 0x92100000 + REG 0x80000f00, 0x12344321 + REG 0xB8001000, 0xa2100000 + REG 0x80000000, 0x12344321 + REG 0x80000000, 0x12344321 + REG 0xB8001000, 0xb2100000 + REG8 0x80000033, 0xda + REG8 0x81000000, 0xff + REG 0xB8001000, 0x82226080 + REG 0x80000000, 0xDEADBEEF diff --git a/board/imx31_phycore/u-boot.lds b/board/imx31_phycore/u-boot.lds new file mode 100644 index 0000000..1460adc --- /dev/null +++ b/board/imx31_phycore/u-boot.lds @@ -0,0 +1,59 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm1136/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/korat/config.mk b/board/korat/config.mk index 39966e0..fa8374f 100644 --- a/board/korat/config.mk +++ b/board/korat/config.mk @@ -24,14 +24,24 @@ # Korat (PPC440EPx) board # -TEXT_BASE = 0xFFFA0000 - PLATFORM_CPPFLAGS += -DCONFIG_440=1 ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG endif +ifeq ($(emul),1) +PLATFORM_CPPFLAGS += -fno-schedule-insns -fno-schedule-insns2 +endif + ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8CFF0000 +endif + +ifeq ($(perm),1) +PLATFORM_CPPFLAGS += -DCONFIG_KORAT_PERMANENT +TEXT_BASE = 0xFFFA0000 +else +TEXT_BASE = 0xF7F60000 +LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-F7FC.lds endif diff --git a/board/korat/init.S b/board/korat/init.S index bd0e8b4..bf8b2c8 100644 --- a/board/korat/init.S +++ b/board/korat/init.S @@ -43,7 +43,7 @@ tlbtab: * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the * speed up boot process. It is patched after relocation to enable SA_I */ - tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G ) + tlbentry( 0xF0000000, SZ_256M, 0xF0000000, 1, AC_R|AC_W|AC_X|SA_G ) /* * TLB entries for SDRAM are not needed on this platform. They are @@ -52,24 +52,32 @@ tlbtab: #ifdef CFG_INIT_RAM_DCACHE /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) + tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, + AC_R|AC_W|AC_X|SA_G ) #endif /* TLB-entry for PCI Memory */ - tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE + 0x00000000, SZ_256M, + CFG_PCI_MEMBASE + 0x00000000, 1, AC_R|AC_W|SA_G|SA_I ) + + tlbentry( CFG_PCI_MEMBASE + 0x10000000, SZ_256M, + CFG_PCI_MEMBASE + 0x10000000, 1, AC_R|AC_W|SA_G|SA_I ) + + tlbentry( CFG_PCI_MEMBASE + 0x20000000, SZ_256M, + CFG_PCI_MEMBASE + 0x20000000, 1, AC_R|AC_W|SA_G|SA_I ) + + tlbentry( CFG_PCI_MEMBASE + 0x30000000, SZ_256M, + CFG_PCI_MEMBASE + 0x30000000, 1, AC_R|AC_W|SA_G|SA_I ) /* TLB-entry for EBC */ tlbentry( CFG_CPLD_BASE, SZ_1K, CFG_CPLD_BASE, 1, AC_R|AC_W|SA_G|SA_I ) /* TLB-entry for Internal Registers & OCM */ /* I wonder why this must be executable -- lrj@acm.org 2007-10-08 */ - tlbentry( 0xE0000000, SZ_16M, 0xE0000000, 0, AC_R|AC_W|AC_X|SA_I ) + tlbentry( 0xE0000000, SZ_16M, 0xE0000000, 0, AC_R|AC_W|AC_X|SA_I ) /*TLB-entry PCI registers*/ - tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|SA_G|SA_I ) /* TLB-entry for peripherals */ tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|SA_G|SA_I) @@ -78,3 +86,10 @@ tlbtab: tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_R|AC_W|SA_G|SA_I) tlbtab_end + +#if defined(CONFIG_KORAT_PERMANENT) + .globl korat_branch_absolute +korat_branch_absolute: + mtlr r3 + blr +#endif diff --git a/board/korat/korat.c b/board/korat/korat.c index 90fd0a7..a7b4b27 100644 --- a/board/korat/korat.c +++ b/board/korat/korat.c @@ -2,12 +2,12 @@ * (C) Copyright 2007-2008 * Larry Johnson, lrj@acm.org * - * (C) Copyright 2006-2008 + * (C) Copyright 2006-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2006 * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com - * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -39,12 +39,45 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ ulong flash_get_size(ulong base, int banknum); +#if defined(CONFIG_KORAT_PERMANENT) +void korat_buzzer(int const on) +{ + if (on) { + out_8((u8 *) CFG_CPLD_BASE + 0x05, + in_8((u8 *) CFG_CPLD_BASE + 0x05) | 0x80); + } else { + out_8((u8 *) CFG_CPLD_BASE + 0x05, + in_8((u8 *) CFG_CPLD_BASE + 0x05) & ~0x80); + } +} +#endif + int board_early_init_f(void) { - u32 sdr0_pfc1, sdr0_pfc2; - u32 reg; + uint32_t sdr0_pfc1, sdr0_pfc2; + uint32_t reg; int eth; +#if defined(CONFIG_KORAT_PERMANENT) + unsigned mscount; + + extern void korat_branch_absolute(uint32_t addr); + + for (mscount = 0; mscount < CFG_KORAT_MAN_RESET_MS; ++mscount) { + udelay(1000); + if (gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_)) { + /* This call does not return. */ + korat_branch_absolute( + CFG_FLASH1_TOP - 2 * CFG_ENV_SECT_SIZE - 4); + } + } + korat_buzzer(1); + while (!gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_)) + udelay(1000); + + korat_buzzer(0); +#endif + mtdcr(ebccfga, xbcfg); mtdcr(ebccfgd, 0xb8400000); @@ -75,8 +108,11 @@ int board_early_init_f(void) mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ mtdcr(uic2sr, 0xffffffff); /* clear all */ - /* take sim card reader and CF controller out of reset */ - out_8((u8 *) CFG_CPLD_BASE + 0x04, 0x80); + /* + * Take sim card reader and CF controller out of reset. Also enable PHY + * auto-detect until board-specific PHY resets are available. + */ + out_8((u8 *) CFG_CPLD_BASE + 0x02, 0xC0); /* Configure the two Ethernet PHYs. For each PHY, configure for fiber * if the SFP module is present, and for copper if it is not present. @@ -85,8 +121,8 @@ int board_early_init_f(void) if (gpio_read_in_bit(CFG_GPIO_SFP0_PRESENT_ + eth)) { /* SFP module not present: configure PHY for copper. */ /* Set PHY to autonegotate 10 MB, 100MB, or 1 GB */ - out_8((u8 *) CFG_CPLD_BASE + 0x06, - in_8((u8 *) CFG_CPLD_BASE + 0x06) | + out_8((u8 *) CFG_CPLD_BASE + 0x03, + in_8((u8 *) CFG_CPLD_BASE + 0x03) | 0x06 << (4 * eth)); } else { /* SFP module present: configure PHY for fiber and @@ -99,10 +135,18 @@ int board_early_init_f(void) gpio_write_bit(CFG_GPIO_PHY0_EN, 1); gpio_write_bit(CFG_GPIO_PHY1_EN, 1); - /* select Ethernet pins */ + /* Wait 1 ms, then enable Fiber signal detect to PHYs. */ + udelay(1000); + out_8((u8 *) CFG_CPLD_BASE + 0x03, + in_8((u8 *) CFG_CPLD_BASE + 0x03) | 0x88); + + /* select Ethernet (and optionally IIC1) pins */ mfsdr(SDR0_PFC1, sdr0_pfc1); sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4; +#ifdef CONFIG_I2C_MULTI_BUS + sdr0_pfc1 |= ((sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL); +#endif mfsdr(SDR0_PFC2, sdr0_pfc2); sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4; @@ -116,6 +160,58 @@ int board_early_init_f(void) return 0; } +/* + * The boot flash on CS0 normally has its write-enable pin disabled, and so will + * not respond to CFI commands. This routine therefore fills in the flash + * information for the boot flash. (The flash at CS1 operates normally.) + */ +ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) +{ + uint32_t addr; + int i; + + if (1 != banknum) + return 0; + + info->size = CFG_FLASH0_SIZE; + info->sector_count = CFG_FLASH0_SIZE / 0x20000; + info->flash_id = 0x01000000; + info->portwidth = 2; + info->chipwidth = 2; + info->buffer_size = 32; + info->erase_blk_tout = 16384; + info->write_tout = 2; + info->buffer_write_tout = 5; + info->vendor = 2; + info->cmd_reset = 0x00F0; + info->interface = 2; + info->legacy_unlock = 0; + info->manufacturer_id = 1; + info->device_id = 0x007E; + +#if CFG_FLASH0_SIZE == 0x01000000 + info->device_id2 = 0x2101; +#elif CFG_FLASH0_SIZE == 0x04000000 + info->device_id2 = 0x2301; +#else +#error Unable to set device_id2 for current CFG_FLASH0_SIZE +#endif + + info->ext_addr = 0x0040; + info->cfi_version = 0x3133; + info->cfi_offset = 0x0055; + info->addr_unlock1 = 0x00000555; + info->addr_unlock2 = 0x000002AA; + info->name = "CFI conformant"; + for (i = 0, addr = -info->size; + i < info->sector_count; + ++i, addr += 0x20000) { + info->start[i] = addr; + info->protect[i] = 0x00; + } + return 1; +} + static int man_data_read(unsigned int addr) { /* @@ -189,12 +285,20 @@ static void set_serial_number(void) * If the environmental variable "serial#" is not set, try to set it * from the manufacturer's information serial EEPROM. */ - char s[MAN_SERIAL_NO_LENGTH + 1]; + char s[MAN_INFO_LENGTH + MAN_MAC_ADDR_LENGTH + 2]; + + if (getenv("serial#")) + return; + + if (!man_data_read_field(s, MAN_INFO_FIELD, MAN_INFO_LENGTH)) + return; + + s[MAN_INFO_LENGTH] = '-'; + if (!man_data_read_field(s + MAN_INFO_LENGTH + 1, MAN_MAC_ADDR_FIELD, + MAN_MAC_ADDR_LENGTH)) + return; - if (0 == getenv("serial#") && - 0 != man_data_read_field(s, MAN_SERIAL_NO_FIELD, - MAN_SERIAL_NO_LENGTH)) - setenv("serial#", s); + setenv("serial#", s); } static void set_mac_addresses(void) @@ -204,45 +308,58 @@ static void set_mac_addresses(void) * set, try to set them from the manufacturer's information serial * EEPROM. */ - char s[MAN_MAC_ADDR_LENGTH + 1]; + +#if MAN_MAC_ADDR_LENGTH % 2 != 0 +#error MAN_MAC_ADDR_LENGTH must be an even number +#endif + + char s[(3 * MAN_MAC_ADDR_LENGTH) / 2]; + char *src; + char *dst; if (0 != getenv("ethaddr") && 0 != getenv("eth1addr")) return; - if (0 == man_data_read_field(s, MAN_MAC_ADDR_FIELD, - MAN_MAC_ADDR_LENGTH)) + if (0 == man_data_read_field(s + (MAN_MAC_ADDR_LENGTH / 2) - 1, + MAN_MAC_ADDR_FIELD, MAN_MAC_ADDR_LENGTH)) return; + for (src = s + (MAN_MAC_ADDR_LENGTH / 2) - 1, dst = s; src != dst;) { + *dst++ = *src++; + *dst++ = *src++; + *dst++ = ':'; + } if (0 == getenv("ethaddr")) setenv("ethaddr", s); if (0 == getenv("eth1addr")) { - ++s[MAN_MAC_ADDR_LENGTH - 1]; + ++s[((3 * MAN_MAC_ADDR_LENGTH) / 2) - 2]; setenv("eth1addr", s); } } int misc_init_r(void) { - uint pbcr; - int size_val = 0; - u32 reg; + uint32_t pbcr; + int size_val; + uint32_t reg; unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; - char *act = getenv("usbact"); - - /* Re-do flash sizing to get full correct info */ + uint32_t const flash1_size = gd->bd->bi_flashsize - CFG_FLASH0_SIZE; + char const *const act = getenv("usbact"); - /* adjust flash start and offset */ - gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + /* + * Re-do FLASH1 sizing and adjust flash start and offset. + */ + gd->bd->bi_flashstart = CFG_FLASH1_TOP - flash1_size; gd->bd->bi_flashoffset = 0; - mtdcr(ebccfga, pb0cr); + mtdcr(ebccfga, pb1cr); pbcr = mfdcr(ebccfgd); - size_val = ffs(gd->bd->bi_flashsize) - 21; + size_val = ffs(flash1_size) - 21; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); - mtdcr(ebccfga, pb0cr); + mtdcr(ebccfga, pb1cr); mtdcr(ebccfgd, pbcr); /* @@ -250,14 +367,37 @@ int misc_init_r(void) */ flash_get_size(gd->bd->bi_flashstart, 0); - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, -CFG_MONITOR_LEN, 0xffffffff, - &flash_info[0]); + /* + * Re-do FLASH1 sizing and adjust flash offset to reserve space for + * environment + */ + gd->bd->bi_flashoffset = + CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - CFG_FLASH1_ADDR; + mtdcr(ebccfga, pb1cr); + pbcr = mfdcr(ebccfgd); + size_val = ffs(gd->bd->bi_flashsize - CFG_FLASH0_SIZE) - 21; + pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); + mtdcr(ebccfga, pb1cr); + mtdcr(ebccfgd, pbcr); + + /* Monitor protection ON by default */ +#if defined(CONFIG_KORAT_PERMANENT) + (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE, + CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, + flash_info + 1); +#else + (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE, + CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, + flash_info); +#endif /* Env protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1, + flash_info); (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND, - CFG_ENV_ADDR_REDUND + 2 * CFG_ENV_SECT_SIZE - 1, - &flash_info[0]); + CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1, + flash_info); /* * USB suff... @@ -393,6 +533,8 @@ int misc_init_r(void) set_serial_number(); set_mac_addresses(); + gpio_write_bit(CFG_GPIO_ATMEGA_RESET_, 1); + return 0; } @@ -402,10 +544,10 @@ int checkboard(void) u8 const rev = in_8((u8 *) CFG_CPLD_BASE + 0); printf("Board: Korat, Rev. %X", rev); - if (s != NULL) + if (s) printf(", serial# %s", s); - printf(", Ethernet PHY 0: "); + printf(".\n Ethernet PHY 0: "); if (gpio_read_out_bit(CFG_GPIO_PHY0_FIBER_SEL)) printf("fiber"); else @@ -418,7 +560,10 @@ int checkboard(void) printf("copper"); printf(".\n"); - return (0); +#if defined(CONFIG_KORAT_PERMANENT) + printf(" Executing permanent copy of U-Boot.\n"); +#endif + return 0; } #if defined(CFG_DRAM_TEST) @@ -529,23 +674,26 @@ void pci_target_init(struct pci_controller *hose) /* * PowerPC440EPX PCI Master configuration. * Map one 1Gig range of PLB/processor addresses to PCI memory space. - * PLB address 0xA0000000-0xDFFFFFFF - * ==> PCI address 0xA0000000-0xDFFFFFFF + * PLB address 0x80000000-0xBFFFFFFF + * ==> PCI address 0x80000000-0xBFFFFFFF * Use byte reversed out routines to handle endianess. * Make this region non-prefetchable. */ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM0PCILA, + CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ /* and enable region */ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ - out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM1LA, + CFG_PCI_MEMBASE + 0x20000000); /* PMM0 Local Address */ + out32r(PCIX0_PMM1PCILA, + CFG_PCI_MEMBASE + 0x20000000); /* PMM0 PCI Low Address */ out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ /* and enable region */ diff --git a/board/r5200/u-boot.lds b/board/korat/u-boot-F7FC.lds index 29fe589..cceb4f5 100644 --- a/board/r5200/u-boot.lds +++ b/board/korat/u-boot-F7FC.lds @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000 + * (C) Copyright 2002 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -21,12 +21,22 @@ * MA 02111-1307 USA */ -OUTPUT_ARCH(m68k) -SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); /* Do we need any of these for elf? __DYNAMIC = 0; */ SECTIONS { + .resetvec 0xF7FBFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xF7FBF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + /* Read-only sections, merged into text segment: */ . = + SIZEOF_HEADERS; .interp : { *(.interp) } @@ -56,14 +66,7 @@ SECTIONS /* WARNING - the following is hand-optimized to fit within */ /* the sector layout of our flash chips! XXX FIXME XXX */ - cpu/mcf52x2/start.o (.text) - lib_m68k/traps.o (.text) - cpu/mcf52x2/interrupts.o (.text) - common/dlmalloc.o (.text) - lib_generic/zlib.o (.text) - - . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + cpu/ppc4xx/start.o (.text) *(.text) *(.fixup) @@ -75,6 +78,7 @@ SECTIONS { *(.rodata) *(.rodata1) + *(.rodata.str1.4) } .fini : { *(.fini) } =0 .ctors : { *(.ctors) } @@ -84,12 +88,9 @@ SECTIONS . = (. + 0x00FF) & 0xFFFFFF00; _erotext = .; PROVIDE (erotext = .); - .reloc : { - __got_start = .; *(.got) - __got_end = .; _GOT2_TABLE_ = .; *(.got2) _FIXUP_TABLE_ = .; @@ -131,14 +132,12 @@ SECTIONS __bss_start = .; .bss (NOLOAD) : { - _sbss = .; *(.sbss) *(.scommon) *(.dynbss) *(.bss) *(COMMON) - . = ALIGN(4); - _ebss = .; } + _end = . ; PROVIDE (end = .); } diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c index affaeff..7c3cf49 100644 --- a/board/lwmon5/sdram.c +++ b/board/lwmon5/sdram.c @@ -6,7 +6,7 @@ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com * - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or @@ -35,6 +35,7 @@ #include <asm/mmu.h> #include <asm/io.h> #include <ppc440.h> +#include <watchdog.h> /* * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory @@ -99,87 +100,37 @@ static void wait_ddr_idle(void) */ } -static void blank_string(int size) -{ - int i; - - for (i=0; i<size; i++) - putc('\b'); - for (i=0; i<size; i++) - putc(' '); - for (i=0; i<size; i++) - putc('\b'); -} - static void program_ecc(u32 start_address, u32 num_bytes, u32 tlb_word2_i_value) { - u32 current_address; - u32 end_address; - u32 address_increment; u32 val; - char str[] = "ECC generation -"; - char slash[] = "\\|/-\\|/-"; - int loop = 0; - int loopi = 0; - - current_address = start_address; + u32 current_addr = start_address; + int bytes_remaining; sync(); - eieio(); wait_ddr_idle(); - if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) { - /* ECC bit set method for non-cached memory */ - address_increment = 4; - end_address = current_address + num_bytes; - - puts(str); - - while (current_address < end_address) { - *((u32 *)current_address) = 0x00000000; - current_address += address_increment; - - if ((loop++ % (2 << 20)) == 0) { - putc('\b'); - putc(slash[loopi++ % 8]); - } - } + /* + * Because of 440EPx errata CHIP 11, we don't touch the last 256 + * bytes of SDRAM. + */ + bytes_remaining = num_bytes - CFG_MEM_TOP_HIDE; - blank_string(strlen(str)); - } else { - /* ECC bit set method for cached memory */ -#if 0 /* test-only: will remove this define later, when ECC problems are solved! */ - /* - * Some boards (like lwmon5) need to preserve the memory - * content upon ECC generation (for the log-buffer). - * Therefore we don't fill the memory with a pattern or - * just zero it, but write the same values back that are - * already in the memory cells. - */ - address_increment = CFG_CACHELINE_SIZE; - end_address = current_address + num_bytes; - - current_address = start_address; - while (current_address < end_address) { - /* - * TODO: Th following sequence doesn't work correctly. - * Just invalidating and flushing the cache doesn't - * seem to trigger the re-write of the memory. - */ - ppcDcbi(current_address); - ppcDcbf(current_address); - current_address += CFG_CACHELINE_SIZE; - } -#else - dcbz_area(start_address, num_bytes); - dflush(); -#endif + /* + * We have to write the ECC bytes by zeroing and flushing in smaller + * steps, since the whole 256MByte takes too long for the external + * watchdog. + */ + while (bytes_remaining > 0) { + dcbz_area(current_addr, min((64 << 20), bytes_remaining)); + current_addr += 64 << 20; + bytes_remaining -= 64 << 20; + WATCHDOG_RESET(); } + dflush(); sync(); - eieio(); wait_ddr_idle(); /* Clear error status */ @@ -191,7 +142,6 @@ static void program_ecc(u32 start_address, mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF)); sync(); - eieio(); wait_ddr_idle(); } #endif diff --git a/board/m501sk/memsetup.S b/board/m501sk/memsetup.S index 9e174b5..6aea723 100644 --- a/board/m501sk/memsetup.S +++ b/board/m501sk/memsetup.S @@ -52,8 +52,8 @@ #define MC_AASR_VAL 0x00000000 #define EBI_CFGR 0xFFFFFF64 #define EBI_CFGR_VAL 0x00000000 -#define SMC2_CSR 0xFFFFFF70 -#define SMC2_CSR_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ +#define SMC_CSR0 0xFFFFFF70 +#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ /* clocks */ #define PLLAR 0xFFFFFC28 @@ -141,8 +141,8 @@ SMRDATA: .word MC_AASR_VAL .word EBI_CFGR .word EBI_CFGR_VAL - .word SMC2_CSR - .word SMC2_CSR_VAL + .word SMC_CSR0 + .word SMC_CSR0_VAL .word PLLAR .word PLLAR_VAL .word PLLBR diff --git a/board/mpr2/Makefile b/board/mpr2/Makefile new file mode 100644 index 0000000..17ca17e --- /dev/null +++ b/board/mpr2/Makefile @@ -0,0 +1,54 @@ +# +# Copyright (C) 2007 +# Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> +# +# Copyright (C) 2007 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# Copyright (C) 2007 +# Kenati Technologies, Inc. +# +# (C) Copyright 2008 +# Mark Jonas <mark.jonas@de.bosch.com> +# +# board/mpr2/Makefile +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := mpr2.o +SOBJS := lowlevel_init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/mpr2/config.mk b/board/mpr2/config.mk new file mode 100644 index 0000000..6d41d97 --- /dev/null +++ b/board/mpr2/config.mk @@ -0,0 +1,37 @@ +# +# Copyright (C) 2007 +# Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> +# +# Copyright (C) 2007 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# Copyright (C) 2007 +# Kenati Technologies, Inc. +# +# Copyright (C) 2008 +# Mark Jonas <mark.jonas@de.bosch.com> +# +# board/mpr2/config.mk +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +# +# TEXT_BASE refers to image _after_ relocation. +# +# NOTE: Must match value used in u-boot.lds (in this directory). +# + +TEXT_BASE = 0x8FFC0000 diff --git a/board/mpr2/lowlevel_init.S b/board/mpr2/lowlevel_init.S new file mode 100644 index 0000000..060957a --- /dev/null +++ b/board/mpr2/lowlevel_init.S @@ -0,0 +1,148 @@ +/* + * (C) Copyright 2008 + * Mark Jonas <mark.jonas@de.bosch.com> + * + * (C) Copyright 2007 + * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * board/mpr2/lowlevel_init.S + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + +/* + * Set frequency multipliers and dividers in FRQCR. + */ + mov.l WTCSR_A,r1 + mov.l WTCSR_D,r0 + mov.w r0,@r1 + + mov.l WTCNT_A,r1 + mov.l WTCNT_D,r0 + mov.w r0,@r1 + + mov.l FRQCR_A,r1 + mov.l FRQCR_D,r0 + mov.w r0,@r1 + +/* + * Setup CS0 (Flash). + */ + mov.l CS0BCR_A, r1 + mov.l CS0BCR_D, r0 + mov.l r0, @r1 + + mov.l CS0WCR_A, r1 + mov.l CS0WCR_D, r0 + mov.l r0, @r1 + +/* + * Setup CS3 (SDRAM). + */ + mov.l CS3BCR_A, r1 + mov.l CS3BCR_D, r0 + mov.l r0, @r1 + + mov.l CS3WCR_A, r1 + mov.l CS3WCR_D, r0 + mov.l r0, @r1 + + mov.l SDCR_A, r1 + mov.l SDCR_D1, r0 + mov.l r0, @r1 + + mov.l RTCSR_A, r1 + mov.l RTCSR_D, r0 + mov.l r0, @r1 + + mov.l RTCNT_A, r1 + mov.l RTCNT_D, r0 + mov.l r0, @r1 + + mov.l RTCOR_A, r1 + mov.l RTCOR_D, r0 + mov.l r0, @r1 + + mov.l SDCR_A, r1 + mov.l SDCR_D2, r0 + mov.l r0, @r1 + + mov.l SDMR3_A, r1 + mov.l SDMR3_D, r0 + add r0, r1 + mov #0, r0 + mov.w r0, @r1 + + rts + nop + + .align 4 + +/* + * Configuration for MPR2 A.3 through A.7 + */ + +/* + * PLL Settings + */ +FRQCR_D: .long 0x1103 /* I:B:P=8:4:2 */ +WTCNT_D: .long 0x5A00 /* start counting at zero */ +WTCSR_D: .long 0xA507 /* divide by 4096 */ + +/* + * Spansion S29GL256N11 @ 48 MHz + */ +CS0BCR_D: .long 0x12490400 /* 1 idle cycle inserted, normal space, 16 bit */ +CS0WCR_D: .long 0x00000340 /* tSW=0.5ck, 6 wait cycles, NO external wait, tHW=0.5ck */ + +/* + * Samsung K4S511632B-UL75 @ 48 MHz + * Micron MT48LC32M16A2-75 @ 48 MHz + */ +CS3BCR_D: .long 0x10004400 /* CS3BCR = 0x10004400, minimum idle cycles, SDRAM, 16 bit */ +CS3WCR_D: .long 0x00000091 /* tRP=1ck, tRCD=1ck, CL=2, tRWL=2ck, tRC=4ck */ +SDCR_D1: .long 0x00000012 /* no refresh, 13 rows, 10 cols, NO bank active mode */ +SDCR_D2: .long 0x00000812 /* refresh */ +RTCSR_D: .long 0xA55A0008 /* 1/4, once */ +RTCNT_D: .long 0xA55A005D /* count 93 */ +RTCOR_D: .long 0xa55a005d /* count 93 */ +SDMR3_D: .long 0x440 /* mode register CL2, burst read and SINGLE WRITE */ + +/* + * Registers + */ + +FRQCR_A: .long 0xA415FF80 +WTCNT_A: .long 0xA415FF84 +WTCSR_A: .long 0xA415FF86 + +#define BSC_BASE 0xA4FD0000 +CS0BCR_A: .long BSC_BASE + 0x04 +CS3BCR_A: .long BSC_BASE + 0x0C +CS0WCR_A: .long BSC_BASE + 0x24 +CS3WCR_A: .long BSC_BASE + 0x2C +SDCR_A: .long BSC_BASE + 0x44 +RTCSR_A: .long BSC_BASE + 0x48 +RTCNT_A: .long BSC_BASE + 0x4C +RTCOR_A: .long BSC_BASE + 0x50 +SDMR3_A: .long BSC_BASE + 0x5000 diff --git a/board/mpr2/mpr2.c b/board/mpr2/mpr2.c new file mode 100644 index 0000000..2ddb0c1 --- /dev/null +++ b/board/mpr2/mpr2.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2008 + * Mark Jonas <mark.jonas@de.bosch.com> + * + * board/mpr2/mpr2.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> + +int checkboard(void) +{ + puts("BOARD: MPR2\n"); + return 0; +} + +int board_init(void) +{ + /* + * For MPR2 A.3 through A.7 + */ + + /* CS2: Ethernet (0xA8000000 - 0xABFFFFFF) */ + __raw_writel(0x36db0400, CS2BCR); /* 4 idle cycles, normal space, 16 bit data bus */ + __raw_writel(0x000003c0, CS2WCR); /* (WR:8), no ext. wait */ + + /* CS4: CAN1 (0xB0000000 - 0xB3FFFFFF) */ + __raw_writel(0x00000200, CS4BCR); /* no idle cycles, normal space, 8 bit data bus */ + __raw_writel(0x00100981, CS4WCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + + /* CS5a: CAN2 (0xB4000000 - 0xB5FFFFFF) */ + __raw_writel(0x00000200, CS5ABCR); /* no idle cycles, normal space, 8 bit data bus */ + __raw_writel(0x00100981, CS5AWCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + + /* CS5b: CAN3 (0xB6000000 - 0xB7FFFFFF) */ + __raw_writel(0x00000200, CS5BBCR); /* no idle cycles, normal space, 8 bit data bus */ + __raw_writel(0x00100981, CS5BWCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + + /* CS6a: Rotary (0xB8000000 - 0xB9FFFFFF) */ + __raw_writel(0x00000200, CS6ABCR); /* no idle cycles, normal space, 8 bit data bus */ + __raw_writel(0x001009C1, CS6AWCR); /* (SW:1.5 WR:3 HW:1.5), no ext. wait */ + + /* set Pin Select Register A: /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2, /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND */ + __raw_writew(0xAABC, PSELA); /* 10 10 10 10 10 11 11 00 */ + + /* set Pin Select Register B: /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC, LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved */ + __raw_writew(0x3C00, PSELB); /* 0 0 11 11 0 0 00000000 */ + + /* set Pin Select Register C: SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved */ + __raw_writew(0x0000, PSELC); /* 00 00 00 00 00000000 */ + + /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK, Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved */ + __raw_writew(0x0000, PSELD); /* 0 00 00 00 00 00 00 00 0 */ + + /* OTH: (00) Other fuction + * GPO: (01) General Purpose Output + * GPI: (11) General Purpose Input + * GPI+: (10) General Purpose Input with internal pull-up + *------------------------------------------------------- + * A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5); + * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1); */ + __raw_writew(0x5555, PACR); /* 01 01 01 01 01 01 01 01 */ + + /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1); + * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0); */ + __raw_writew(0x5555, PBCR); /* 01 01 01 01 01 01 01 01 */ + + /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4); + * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; */ + __raw_writew(0x5500, PCCR); /* 01 01 01 01 00 00 00 00 */ + + /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4); + * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0); */ + __raw_writew(0x5555, PDCR); /* 01 01 01 01 01 01 01 01 */ + + /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP; + * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM; */ + __raw_writew(0x2800, PECR); /* 00 10 10 00 00 00 00 00 */ + + /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3; + * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc); */ + __raw_writew(0x0002, PFCR); /* 00 00 00 00 00 00 00 10 */ + + /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ);G4 GPI(KEY2); + * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9); */ + __raw_writew(0x03D5, PGCR); /* 00 00 00 11 11 01 01 01 */ + + /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE); + * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR; */ + __raw_writew(0x0050, PHCR); /* 00 00 00 00 01 01 00 00 */ + + /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3; + * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC; */ + __raw_writew(0x0000, PJCR); /* 00 00 00 00 00 00 00 00 */ + + /* K7 (x); K6 (x); K5 (x); K4 (x) + * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nc); K0 PINT4(FLASH_READY); */ + __raw_writew(0x00FB, PKCR); /* 00 00 00 00 11 11 10 11 */ + + /* L7 TRST; L6 TMS; L5 TDO; L4 TDI; + * L3 TCK; L2 (x); L1 (x); L0 (x); */ + __raw_writew(0x0000, PLCR); /* 00 00 00 00 00 00 00 00 */ + + /* M7 GPO(CURRENT_SINK);M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED); M4 GPO(LAN_RESET); + * M3 GPO(BUZZER); M2 GPO(LCD_BL); M1 CS5B(CAN3_CS); M0 GPI+(nc); */ + __raw_writew(0x5552, PMCR); /* 01 01 01 01 01 01 00 10 */ + __raw_writeb(0xF0, PMDR); /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit, LAN_RESET=off, BUZZER=off, LCD_BL=off */ + + /* P7 (x); P6 (x); P5 (x); P4 GPO(on pullup); + * P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ); */ + __raw_writew(0x0100, PPCR); /* 00 00 00 01 00 00 00 00 */ + __raw_writeb(0x10, PPDR); /* no current flow through pullup */ + + /* R7 A25; R6 A24; R5 A23; R4 A22; + * R3 A21; R2 A20; R1 A19; R0 A0; */ + __raw_writew(0x0000, PRCR); /* 00 00 00 00 00 00 00 00 */ + + /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2); + * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK; */ + __raw_writew(0x0140, PSCR); /* 00 00 00 01 01 00 00 00 */ + + /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS; + * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG); */ + __raw_writew(0x0001, PTCR); /* 00 00 00 00 00 00 00 01 */ + + /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT); + * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK; */ + __raw_writew(0x0240, PUCR); /* 00 00 00 10 01 00 00 00 */ + + /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2); + * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT); */ + __raw_writew(0x0142, PVCR); /* 00 00 00 01 01 00 00 10 */ + + return 0; +} + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_SDRAM_SIZE; + printf("SDRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + diff --git a/board/mpr2/u-boot.lds b/board/mpr2/u-boot.lds new file mode 100644 index 0000000..6fee7f2 --- /dev/null +++ b/board/mpr2/u-boot.lds @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2007 + * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * Copyright (C) 2007 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * Copyright (C) 2008 + * Mark Jonas <mark.jonas@de.bosch.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +SECTIONS +{ + /* + Base address of internal SDRAM is 0x8C000000. + U-Boot resides in the last 256 kB of the 64 MB. + + NOTE: This address must match with the definition of + TEXT_BASE in config.mk (in this directory). + + */ + . = 0x8C000000 + (64*1024*1024) - (256*1024); + + PROVIDE (reloc_dst = .); + + PROVIDE (_ftext = .); + PROVIDE (_fcode = .); + PROVIDE (_start = .); + + .text : + { + cpu/sh3/start.o (.text) + . = ALIGN(8192); + common/environment.o (.ppcenv) + . = ALIGN(8192); + common/environment.o (.ppcenvr) + . = ALIGN(8192); + *(.text) + . = ALIGN(4); + } =0xFF + PROVIDE (_ecode = .); + .rodata : + { + *(.rodata) + . = ALIGN(4); + } + PROVIDE (_etext = .); + + + PROVIDE (_fdata = .); + .data : + { + *(.data) + . = ALIGN(4); + } + PROVIDE (_edata = .); + + PROVIDE (_fgot = .); + .got : + { + *(.got) + . = ALIGN(4); + } + PROVIDE (_egot = .); + + PROVIDE (__u_boot_cmd_start = .); + .u_boot_cmd : + { + *(.u_boot_cmd) + . = ALIGN(4); + } + PROVIDE (__u_boot_cmd_end = .); + + PROVIDE (reloc_dst_end = .); + /* _reloc_dst_end = .; */ + + PROVIDE (bss_start = .); + PROVIDE (__bss_start = .); + .bss : + { + *(.bss) + . = ALIGN(4); + } + PROVIDE (bss_end = .); + + PROVIDE (_end = .); +} diff --git a/board/mx31ads/Makefile b/board/mx31ads/Makefile new file mode 100644 index 0000000..c854e05 --- /dev/null +++ b/board/mx31ads/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000-2008 +# Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundatio; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := mx31ads.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/mx31ads/config.mk b/board/mx31ads/config.mk new file mode 100644 index 0000000..d34dc02 --- /dev/null +++ b/board/mx31ads/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x87f00000 diff --git a/board/mx31ads/lowlevel_init.S b/board/mx31ads/lowlevel_init.S new file mode 100644 index 0000000..bc05b43 --- /dev/null +++ b/board/mx31ads/lowlevel_init.S @@ -0,0 +1,288 @@ +/* + * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/mx31-regs.h> + +.macro REG reg, val + ldr r2, =\reg + ldr r3, =\val + str r3, [r2] +.endm + +.macro REG8 reg, val + ldr r2, =\reg + ldr r3, =\val + strb r3, [r2] +.endm + +.macro DELAY loops + ldr r2, =\loops +1: + subs r2, r2, #1 + nop + bcs 1b +.endm + +/* RedBoot: AIPS setup - Only setup MPROTx registers. + * The PACR default values are good.*/ +.macro init_aips + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + ldr r0, =0x43F00000 + ldr r1, =0x77777777 + str r1, [r0, #0x00] + str r1, [r0, #0x04] + ldr r0, =0x53F00000 + str r1, [r0, #0x00] + str r1, [r0, #0x04] + + /* + * Clear the on and off peripheral modules Supervisor Protect bit + * for SDMA to access them. Did not change the AIPS control registers + * (offset 0x20) access type + */ + ldr r0, =0x43F00000 + ldr r1, =0x0 + str r1, [r0, #0x40] + str r1, [r0, #0x44] + str r1, [r0, #0x48] + str r1, [r0, #0x4C] + ldr r1, [r0, #0x50] + and r1, r1, #0x00FFFFFF + str r1, [r0, #0x50] + + ldr r0, =0x53F00000 + ldr r1, =0x0 + str r1, [r0, #0x40] + str r1, [r0, #0x44] + str r1, [r0, #0x48] + str r1, [r0, #0x4C] + ldr r1, [r0, #0x50] + and r1, r1, #0x00FFFFFF + str r1, [r0, #0x50] +.endm /* init_aips */ + +/* RedBoot: MAX (Multi-Layer AHB Crossbar Switch) setup */ +.macro init_max + ldr r0, =0x43F04000 + /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ + ldr r1, =0x00302154 + str r1, [r0, #0x000] /* for S0 */ + str r1, [r0, #0x100] /* for S1 */ + str r1, [r0, #0x200] /* for S2 */ + str r1, [r0, #0x300] /* for S3 */ + str r1, [r0, #0x400] /* for S4 */ + /* SGPCR - always park on last master */ + ldr r1, =0x10 + str r1, [r0, #0x010] /* for S0 */ + str r1, [r0, #0x110] /* for S1 */ + str r1, [r0, #0x210] /* for S2 */ + str r1, [r0, #0x310] /* for S3 */ + str r1, [r0, #0x410] /* for S4 */ + /* MGPCR - restore default values */ + ldr r1, =0x0 + str r1, [r0, #0x800] /* for M0 */ + str r1, [r0, #0x900] /* for M1 */ + str r1, [r0, #0xA00] /* for M2 */ + str r1, [r0, #0xB00] /* for M3 */ + str r1, [r0, #0xC00] /* for M4 */ + str r1, [r0, #0xD00] /* for M5 */ +.endm /* init_max */ + +/* RedBoot: M3IF setup */ +.macro init_m3if + /* Configure M3IF registers */ + ldr r1, =0xB8003000 + /* + * M3IF Control Register (M3IFCTL) + * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 + * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 + * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 + * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 + * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 + * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 + * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 + * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 + * ------------ + * 0x00000040 + */ + ldr r0, =0x00000040 + str r0, [r1] /* M3IF control reg */ +.endm /* init_m3if */ + +/* RedBoot: To support 133MHz DDR */ +.macro init_drive_strength + /* + * Disable maximum drive strength SDRAM/DDR lines by clearing DSE1 bits + * in SW_PAD_CTL registers + */ + + /* SDCLK */ + ldr r1, =0x43FAC200 + ldr r0, [r1, #0x6C] + bic r0, r0, #(1 << 12) + str r0, [r1, #0x6C] + + /* CAS */ + ldr r0, [r1, #0x70] + bic r0, r0, #(1 << 22) + str r0, [r1, #0x70] + + /* RAS */ + ldr r0, [r1, #0x74] + bic r0, r0, #(1 << 2) + str r0, [r1, #0x74] + + /* CS2 (CSD0) */ + ldr r0, [r1, #0x7C] + bic r0, r0, #(1 << 22) + str r0, [r1, #0x7C] + + /* DQM3 */ + ldr r0, [r1, #0x84] + bic r0, r0, #(1 << 22) + str r0, [r1, #0x84] + + /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */ + ldr r2, =22 /* (0x2E0 - 0x288) / 4 = 22 */ +pad_loop: + ldr r0, [r1, #0x88] + bic r0, r0, #(1 << 22) + bic r0, r0, #(1 << 12) + bic r0, r0, #(1 << 2) + str r0, [r1, #0x88] + add r1, r1, #4 + subs r2, r2, #0x1 + bne pad_loop +.endm /* init_drive_strength */ + +/* CPLD on CS4 setup */ +.macro init_cs4 + ldr r0, =WEIM_BASE + ldr r1, =0x0000D843 + str r1, [r0, #0x40] + ldr r1, =0x22252521 + str r1, [r0, #0x44] + ldr r1, =0x22220A00 + str r1, [r0, #0x48] +.endm /* init_cs4 */ + +.globl lowlevel_init +lowlevel_init: + + /* Redboot initializes very early AIPS, what for? + * Then it also initializes Multi-Layer AHB Crossbar Switch, + * M3IF */ + /* Also setup the Peripheral Port Remap register inside the core */ + ldr r0, =0x40000015 /* start from AIPS 2GB region */ + mcr p15, 0, r0, c15, c2, 4 + + init_aips + + init_max + + init_m3if + + init_drive_strength + + init_cs4 + + /* Image Processing Unit: */ + /* Too early to switch display on? */ + /* Switch on Display Interface */ + REG IPU_CONF, IPU_CONF_DI_EN + /* Clock Control Module: */ + /* Use CKIH, MCU PLL off */ + REG CCM_CCMR, 0x074B0BF5 + + DELAY 0x40000 + /* MCU PLL on */ + REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE + /* Switch to MCU PLL */ + REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS + + /* PBC CPLD on CS4 */ + mov r1, #CS4_BASE + ldrh r1, [r1, #0x2] + /* Is 27MHz switch set? */ + ands r1, r1, #0x16 + + /* 532-133-66.5 */ + ldr r0, =CCM_BASE + ldr r1, =0xFF871D58 + /* PDR0 */ + str r1, [r0, #0x4] + ldreq r1, MPCTL_PARAM_532 + ldrne r1, MPCTL_PARAM_532_27 + /* MPCTL */ + str r1, [r0, #0x10] + + /* Set UPLL=240MHz, USB=60MHz */ + ldr r1, =0x49FCFE7F + /* PDR1 */ + str r1, [r0, #0x8] + ldreq r1, UPCTL_PARAM_240 + ldrne r1, UPCTL_PARAM_240_27 + /* UPCTL */ + str r1, [r0, #0x14] + /* default CLKO to 1/8 of the ARM core */ + mov r1, #0x000002C0 + add r1, r1, #0x00000006 + /* COSR */ + str r1, [r0, #0x1c] + + /* RedBoot sets 0x1ff, 7, 3, 5, 1, 3, 0 */ +/* REG CCM_PDR0, PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) | \ + PDR0_HSP_PODF(2) | PDR0_NFC_PODF(6) | \ + PDR0_IPG_PODF(1) | PDR0_MAX_PODF(2) | \ + PDR0_MCU_PODF(0)*/ + + /* Redboot: 0, 51, 10, 12 / 0, 14, 9, 13 */ +/* REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0x33) | PLL_MFI(7) | \ + PLL_MFN(0x23)*/ + /* Default: 1, 4, 12, 1 */ + REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1) + + /* B8xxxxxx - NAND, 8xxxxxxx - CSD0 RAM */ + REG 0xB8001010, 0x00000004 + REG 0xB8001004, 0x006ac73a + REG 0xB8001000, 0x92100000 + REG 0x80000f00, 0x12344321 + REG 0xB8001000, 0xa2100000 + REG 0x80000000, 0x12344321 + REG 0x80000000, 0x12344321 + REG 0xB8001000, 0xb2100000 + REG8 0x80000033, 0xda + REG8 0x81000000, 0xff + REG 0xB8001000, 0x82226080 + REG 0x80000000, 0xDEADBEEF + REG 0xB8001010, 0x0000000c + + mov pc, lr + +MPCTL_PARAM_532: + .word (((1-1) << 26) + ((52-1) << 16) + (10 << 10) + (12 << 0)) +MPCTL_PARAM_532_27: + .word (((1-1) << 26) + ((15-1) << 16) + (9 << 10) + (13 << 0)) +UPCTL_PARAM_240: + .word (((2-1) << 26) + ((13-1) << 16) + (9 << 10) + (3 << 0)) +UPCTL_PARAM_240_27: + .word (((2-1) << 26) + ((9 -1) << 16) + (8 << 10) + (8 << 0)) diff --git a/board/mx31ads/mx31ads.c b/board/mx31ads/mx31ads.c new file mode 100644 index 0000000..fe26b73 --- /dev/null +++ b/board/mx31ads/mx31ads.c @@ -0,0 +1,94 @@ +/* + * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mx31.h> +#include <asm/arch/mx31-regs.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} + +int board_init(void) +{ + int i; +#if 0 + /* CS0: Nor Flash */ + /* + * These are values from the RedBoot sources by Freescale. However, + * under U-Boot with this configuration 32-bit accesses don't work, + * lower 16 bits of data are read twice for each 32-bit read. + */ + __REG(CSCR_U(0)) = 0x23524E80; + __REG(CSCR_L(0)) = 0x10000D03; /* WRAP bit (1) is suspicious here, but + * disabling it doesn't help either */ + __REG(CSCR_A(0)) = 0x00720900; +#endif + + /* setup pins for UART1 */ + mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX); + mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX); + mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); + mx31_gpio_mux(MUX_RTS1__UART1_CTS_B); + + /* PBC setup */ + /* Enable UART transceivers also reset the Ethernet/external UART */ + readw(CS4_BASE + 4); + + writew(0x8023, CS4_BASE + 4); + + /* RedBoot also has an empty loop with 100000 iterations here - + * clock doesn't run yet */ + for (i = 0; i < 100000; i++) + ; + + /* Clear the reset, toggle the LEDs */ + writew(0xDF, CS4_BASE + 6); + + /* clock still doesn't run */ + for (i = 0; i < 100000; i++) + ; + + /* See 1.5.4 in IMX31ADSE_PERI_BUS_CNTRL_CPLD_RM.pdf */ + readb(CS4_BASE + 8); + readb(CS4_BASE + 7); + readb(CS4_BASE + 8); + readb(CS4_BASE + 7); + + gd->bd->bi_arch_number = 447; /* board id for linux */ + gd->bd->bi_boot_params = 0x80000100; /* adress of boot parameters */ + + return 0; +} + +int checkboard(void) +{ + printf("Board: MX31ADS\n"); + return 0; +} diff --git a/board/mx31ads/u-boot.lds b/board/mx31ads/u-boot.lds new file mode 100644 index 0000000..1460adc --- /dev/null +++ b/board/mx31ads/u-boot.lds @@ -0,0 +1,59 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm1136/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index b764499..287f32e 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -23,10 +23,12 @@ #include <common.h> -#include <asm/processor.h> +#include <libfdt.h> +#include <fdt_support.h> #include <spd_sdram.h> #include <ppc4xx_enet.h> #include <miiphy.h> +#include <asm/processor.h> DECLARE_GLOBAL_DATA_PTR; @@ -315,3 +317,24 @@ int post_hotkeys_pressed(void) return (ctrlc()); } #endif + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + u32 val[4]; + int rc; + + ft_cpu_setup(blob, bd); + + /* Fixup NOR mapping */ + val[0] = 0; /* chip select number */ + val[1] = 0; /* always 0 */ + val[2] = gd->bd->bi_flashstart; + val[3] = gd->bd->bi_flashsize; + rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", + val, sizeof(val), 1); + if (rc) + printf("Unable to update property NOR mapping, err=%s\n", + fdt_strerror(rc)); +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/prodrive/alpr/init.S b/board/prodrive/alpr/init.S index 135674c..76164ce 100644 --- a/board/prodrive/alpr/init.S +++ b/board/prodrive/alpr/init.S @@ -90,7 +90,16 @@ tlbtab: tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I ) tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X ) tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X ) +#ifdef CONFIG_4xx_DCACHE + tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G) +#else tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) +#endif + +#ifdef CFG_INIT_RAM_DCACHE + /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ + tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) +#endif tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I ) /* PCI */ diff --git a/board/r5200/Makefile b/board/prodrive/pmdra/Makefile index 2ec71ee..564e30e 100644 --- a/board/r5200/Makefile +++ b/board/prodrive/pmdra/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2006 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -25,18 +25,24 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS := pmdra.o +SOBJS := board_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -######################################################################### +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak *~ .depend -# defines $(obj).depend target +######################################################################### +# This is for $(obj).depend target include $(SRCTREE)/rules.mk sinclude $(obj).depend diff --git a/cpu/bf533/start1.S b/board/prodrive/pmdra/board_init.S index 6d4731b..3e4ef7c 100644 --- a/cpu/bf533/start1.S +++ b/board/prodrive/pmdra/board_init.S @@ -1,10 +1,9 @@ /* - * U-boot - start1.S Code running out of RAM after relocation + * Copyright (C) 2008 Prodrive B.V. * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. + * Board-specific low level initialization code. Called at the very end + * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no + * initialization required. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -18,21 +17,13 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA */ -#define ASSEMBLY -#include <linux/config.h> #include <config.h> -#include <asm/blackfin.h> -.global start1; -.global _start1; +.globl dv_board_init +dv_board_init: -.text -_start1: -start1: - sp += -12; - call _board_init_f; - sp += 12; + mov pc, lr diff --git a/board/prodrive/pmdra/config.mk b/board/prodrive/pmdra/config.mk new file mode 100644 index 0000000..aa89d0e --- /dev/null +++ b/board/prodrive/pmdra/config.mk @@ -0,0 +1,39 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> +# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> +# +# (C) Copyright 2003 +# Texas Instruments, <www.ti.com> +# Swaminathan <swami.iyer@ti.com> +# +# Davinci EVM board (ARM925EJS) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# Davinci EVM has 1 bank of 256 MB DDR RAM +# Physical Address: +# 8000'0000 to 9000'0000 +# +# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> +# +# Visioneering Corp. Sonata board (ARM926EJS) cpu +# +# Sonata board has 1 bank of 128 MB DDR RAM +# Physical Address: +# 8000'0000 to 8800'0000 +# +# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu +# +# Schmoogie board has 1 bank of 128 MB DDR RAM +# Physical Address: +# 8000'0000 to 8800'0000 +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) +# +# we load ourself to 8108 '0000 +# +# + +#Provide at least 16MB spacing between us and the Linux Kernel image +TEXT_BASE = 0x81080000 diff --git a/board/prodrive/pmdra/pmdra.c b/board/prodrive/pmdra/pmdra.c new file mode 100644 index 0000000..42f7770 --- /dev/null +++ b/board/prodrive/pmdra/pmdra.c @@ -0,0 +1,189 @@ +/* + * Copyright (C) 2008 Prodrive BV <pv@prodrive.nl> + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * Parts are shamelessly stolen from various TI sources, original copyright + * follows: + * --------------------------------------------------------------------------- + * + * Copyright (C) 2004 Texas Instruments. + * + * --------------------------------------------------------------------------- + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * --------------------------------------------------------------------------- + */ + +#include <common.h> +#include <i2c.h> +#include <asm/arch/hardware.h> +#include <asm/arch/emac_defs.h> + +#define MACH_TYPE_DAVINCI_EVM 901 + +DECLARE_GLOBAL_DATA_PTR; + +extern void timer_init(void); +extern int eth_hw_init(void); +extern phy_t phy; + +/* Works on Always On power domain only (no PD argument) */ +void lpsc_on(unsigned int id) +{ + dv_reg_p mdstat, mdctl; + + if (id >= DAVINCI_LPSC_GEM) + return; /* Don't work on DSP Power Domain */ + + mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4)); + mdctl = REG_P(PSC_MDCTL_BASE + (id * 4)); + + while (REG(PSC_PTSTAT) & 0x01) {; } + + if ((*mdstat & 0x1f) == 0x03) + return; /* Already on and enabled */ + + *mdctl |= 0x03; + + /* Special treatment for some modules as for sprue14 p.7.4.2 */ + if ((id == DAVINCI_LPSC_VPSSSLV) || + (id == DAVINCI_LPSC_EMAC) || + (id == DAVINCI_LPSC_EMAC_WRAPPER) || + (id == DAVINCI_LPSC_MDIO) || + (id == DAVINCI_LPSC_USB) || + (id == DAVINCI_LPSC_ATA) || + (id == DAVINCI_LPSC_VLYNQ) || + (id == DAVINCI_LPSC_UHPI) || + (id == DAVINCI_LPSC_DDR_EMIF) || + (id == DAVINCI_LPSC_AEMIF) || + (id == DAVINCI_LPSC_MMC_SD) || + (id == DAVINCI_LPSC_MEMSTICK) || + (id == DAVINCI_LPSC_McBSP) || + (id == DAVINCI_LPSC_GPIO)) + *mdctl |= 0x200; + + REG(PSC_PTCMD) = 0x01; + + while (REG(PSC_PTSTAT) & 0x03) {; } + while ((*mdstat & 0x1f) != 0x03) {; } /* Probably an overkill... */ +} + +void dsp_on(void) +{ + int i; + + if (REG(PSC_PDSTAT1) & 0x1f) + return; /* Already on */ + + REG(PSC_GBLCTL) |= 0x01; + REG(PSC_PDCTL1) |= 0x01; + REG(PSC_PDCTL1) &= ~0x100; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff; + REG(PSC_PTCMD) = 0x02; + + for (i = 0; i < 100; i++) { + if (REG(PSC_EPCPR) & 0x02) + break; + } + + REG(PSC_CHP_SHRTSW) = 0x01; + REG(PSC_PDCTL1) |= 0x100; + REG(PSC_EPCCR) = 0x02; + + for (i = 0; i < 100; i++) { + if (!(REG(PSC_PTSTAT) & 0x02)) + break; + } + + REG(PSC_GBLCTL) &= ~0x1f; +} + + +int board_init(void) +{ + /* arch number of the board */ + gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM; + + /* address of boot parameters */ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + /* Workaround for TMS320DM6446 errata 1.3.22 */ + REG(PSC_SILVER_BULLET) = 0; + + /* Power on required peripherals */ + lpsc_on(DAVINCI_LPSC_EMAC); + lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER); + lpsc_on(DAVINCI_LPSC_MDIO); + lpsc_on(DAVINCI_LPSC_I2C); + lpsc_on(DAVINCI_LPSC_UART0); + lpsc_on(DAVINCI_LPSC_UART2); + lpsc_on(DAVINCI_LPSC_TIMER1); + lpsc_on(DAVINCI_LPSC_GPIO); + + /* Powerup the DSP */ + dsp_on(); + + /* Bringup UART0 and 2 out of reset */ + REG(UART0_PWREMU_MGMT) = 0x00006001; + REG(UART2_PWREMU_MGMT) = 0x00006001; + + /* Enable GIO3.3V cells used for EMAC */ + REG(VDD3P3V_PWDN) = 0; + + /* Enable UART0 and 2 MUX lines */ + REG(PINMUX1) |= 1; + REG(PINMUX1) |= 4; + + /* Enable EMAC and AEMIF pins */ + REG(PINMUX0) = 0x80000c1f; + + /* Enable I2C pin Mux */ + REG(PINMUX1) |= (1 << 7); + + /* Set the Bus Priority Register to appropriate value */ + REG(VBPR) = 0x20; + + timer_init(); + + return(0); +} + +int misc_init_r(void) +{ + int clk = 0; + + clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1); + + printf("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27)/2); + printf("DDR Clock : %dMHz\n", (clk / 2)); + + if (!eth_hw_init()) + printf("ethernet init failed!\n"); + else + printf("ETH PHY : %s\n", phy.name); + + return(0); +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return(0); +} diff --git a/board/prodrive/pmdra/u-boot.lds b/board/prodrive/pmdra/u-boot.lds new file mode 100644 index 0000000..710b2a2 --- /dev/null +++ b/board/prodrive/pmdra/u-boot.lds @@ -0,0 +1,52 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + . = ALIGN(4); + .text : + { + cpu/arm926ejs/start.o (.text) + *(.text) + } + . = ALIGN(4); + .rodata : { *(.rodata) } + . = ALIGN(4); + .data : { *(.data) } + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/r2dplus/Makefile b/board/r2dplus/Makefile new file mode 100644 index 0000000..ed609ea --- /dev/null +++ b/board/r2dplus/Makefile @@ -0,0 +1,43 @@ +# +# Copyright (C) 2007,2008 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := r2dplus.o +SOBJS := lowlevel_init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +################################################################# + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +################################################################# diff --git a/cpu/bf537/config.mk b/board/r2dplus/config.mk index fbbe75d..1ec7dcc 100644 --- a/cpu/bf537/config.mk +++ b/board/r2dplus/config.mk @@ -1,12 +1,6 @@ -# U-boot - config.mk # -# Copyright (c) 2005-2007 Analog Devices Inc. -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. +# Copyright (C) 2007,2008 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as @@ -20,8 +14,10 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# NOTE: Must match value used in u-boot.lds (in this directory). # - -PLATFORM_RELFLAGS += -mcpu=bf537 +TEXT_BASE = 0x0FFC0000 diff --git a/board/r2dplus/lowlevel_init.S b/board/r2dplus/lowlevel_init.S new file mode 100644 index 0000000..5755de8 --- /dev/null +++ b/board/r2dplus/lowlevel_init.S @@ -0,0 +1,154 @@ +/* + * modified from SH-IPL+g (init-r0p751rlc0011rl.S) + * Initial Register Data for R0P751RLC0011RL (SH7751R 240MHz/120MHz/60MHz) + * Coyright (c) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +*/ + +#include <config.h> +#include <version.h> + +#include <asm/processor.h> + + .global lowlevel_init + .text + .align 2 + +lowlevel_init: + + mov.l CCR_A, r1 + mov.l CCR_D_D, r0 + mov.l r0,@r1 + + mov.l MMUCR_A,r1 + mov.l MMUCR_D,r0 + mov.w r0,@r1 + + mov.l BCR1_A,r1 + mov.l BCR1_D,r0 + mov.l r0,@r1 + + mov.l BCR2_A,r1 + mov.l BCR2_D,r0 + mov.w r0,@r1 + + mov.l BCR3_A,r1 + mov.l BCR3_D,r0 + mov.w r0,@r1 + + mov.l BCR4_A,r1 + mov.l BCR4_D,r0 + mov.l r0,@r1 + + mov.l WCR1_A,r1 + mov.l WCR1_D,r0 + mov.l r0,@r1 + + mov.l WCR2_A,r1 + mov.l WCR2_D,r0 + mov.l r0,@r1 + + mov.l WCR3_A,r1 + mov.l WCR3_D,r0 + mov.l r0,@r1 + + mov.l PCR_A,r1 + mov.l PCR_D,r0 + mov.w r0,@r1 + + mov.l LED_A,r1 + mov #0xff,r0 + mov.w r0,@r1 + + mov.l MCR_A,r1 + mov.l MCR_D1,r0 + mov.l r0,@r1 + + mov.l RTCNT_A,r1 + mov.l RTCNT_D,r0 + mov.w r0,@r1 + + mov.l RTCOR_A,r1 + mov.l RTCOR_D,r0 + mov.w r0,@r1 + + mov.l RFCR_A,r1 + mov.l RFCR_D,r0 + mov.w r0,@r1 + + mov.l RTCSR_A,r1 + mov.l RTCSR_D,r0 + mov.w r0,@r1 + + mov.l SDMR3_A,r1 + mov #0x55,r0 + mov.b r0,@r1 + + /* Wait DRAM refresh 30 times */ + mov.l RFCR_A,r1 + mov #30,r3 +1: + mov.w @r1,r0 + extu.w r0,r2 + cmp/hi r3,r2 + bf 1b + + mov.l MCR_A,r1 + mov.l MCR_D2,r0 + mov.l r0,@r1 + + mov.l SDMR3_A,r1 + mov #0,r0 + mov.b r0,@r1 + + mov.l IRLMASK_A,r1 + mov.l IRLMASK_D,r0 + mov.l r0,@r1 + + mov.l CCR_A, r1 + mov.l CCR_D_E, r0 + mov.l r0, @r1 + + rts + nop + + .align 2 +CCR_A: .long CCR /* Cache Control Register */ +CCR_D_D: .long 0x0808 /* Flush the cache, disable */ +CCR_D_E: .long 0x8000090B + +FRQCR_A: .long FRQCR /* FRQCR Address */ +FRQCR_D: .long 0x00000e0a /* 03/07/15 modify */ +BCR1_A: .long BCR1 /* BCR1 Address */ +BCR1_D: .long 0x00180008 +BCR2_A: .long BCR2 /* BCR2 Address */ +BCR2_D: .long 0xabe8 +BCR3_A: .long BCR3 /* BCR3 Address */ +BCR3_D: .long 0x0000 +BCR4_A: .long BCR4 /* BCR4 Address */ +BCR4_D: .long 0x00000010 +WCR1_A: .long WCR1 /* WCR1 Address */ +WCR1_D: .long 0x33343333 +WCR2_A: .long WCR2 /* WCR2 Address */ +WCR2_D: .long 0xcff86fbf +WCR3_A: .long WCR3 /* WCR3 Address */ +WCR3_D: .long 0x07777707 +LED_A: .long 0x04000036 /* LED Address */ +RTCNT_A: .long RTCNT /* RTCNT Address */ +RTCNT_D: .long 0xA500 /* RTCNT Write Code A5h Data 00h */ +RTCOR_A: .long RTCOR /* RTCOR Address */ +RTCOR_D: .long 0xA534 /* RTCOR Write Code */ +RTCSR_A: .long RTCSR /* RTCSR Address */ +RTCSR_D: .long 0xA510 /* RTCSR Write Code */ +SDMR3_A: .long 0xFF9400CC /* SDMR3 Address */ +SDMR3_D: .long 0x55 +MCR_A: .long MCR /* MCR Address */ +MCR_D1: .long 0x081901F4 /* MRSET:'0' */ +MCR_D2: .long 0x481901F4 /* MRSET:'1' */ +RFCR_A: .long RFCR /* RFCR Address */ +RFCR_D: .long 0xA400 /* RFCR Write Code A4h Data 00h */ +PCR_A: .long PCR /* PCR Address */ +PCR_D: .long 0x0000 +MMUCR_A: .long MMUCR /* MMUCCR Address */ +MMUCR_D: .long 0x00000000 /* MMUCCR Data */ +IRLMASK_A: .long 0xA4000000 /* IRLMASK Address */ +IRLMASK_D: .long 0x00000000 /* IRLMASK Data */ diff --git a/board/r2dplus/r2dplus.c b/board/r2dplus/r2dplus.c new file mode 100644 index 0000000..2ee3ea2 --- /dev/null +++ b/board/r2dplus/r2dplus.c @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2007,2008 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ide.h> +#include <asm/processor.h> +#include <asm/pci.h> + +int checkboard(void) +{ + puts("BOARD: Renesas Solutions R2D Plus\n"); + return 0; +} + +int board_init(void) +{ + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_SDRAM_SIZE; + printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + +int board_late_init(void) +{ + return 0; +} + +#define FPGA_BASE 0xA4000000 +#define FPGA_CFCTL (FPGA_BASE + 0x04) +#define FPGA_CFPOW (FPGA_BASE + 0x06) +#define FPGA_CFCDINTCLR (FPGA_BASE + 0x2A) + +void ide_set_reset (int idereset) +{ + /* if reset = 1 IDE reset will be asserted */ + if (idereset){ + (*(vu_short *)FPGA_CFCTL) = 0x432; + (*(vu_short *)FPGA_CFPOW) |= 0x02; + (*(vu_short *)FPGA_CFCDINTCLR) = 0x01; + } +} + +#if defined(CONFIG_PCI) +static struct pci_controller hose; +void pci_init_board(void) +{ + pci_sh7751_init( &hose ); +} +#endif /* CONFIG_PCI */ diff --git a/board/r2dplus/u-boot.lds b/board/r2dplus/u-boot.lds new file mode 100644 index 0000000..96d8d81 --- /dev/null +++ b/board/r2dplus/u-boot.lds @@ -0,0 +1,105 @@ +/* + * Copyrigth (c) 2007,2008 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +SECTIONS +{ + /* + Base address of internal SDRAM is 0x0C000000. + Although size of SDRAM can be either 16 or 32 MBytes, + we assume 16 MBytes (ie ignore upper half if the full + 32 MBytes is present). + + NOTE: This address must match with the definition of + TEXT_BASE in config.mk (in this directory). + + */ + . = 0x0C000000 + (64*1024*1024) - (256*1024); + + PROVIDE (reloc_dst = .); + + PROVIDE (_ftext = .); + PROVIDE (_fcode = .); + PROVIDE (_start = .); + + .text : + { + cpu/sh4/start.o (.text) + . = ALIGN(8192); + common/environment.o (.ppcenv) + . = ALIGN(8192); + common/environment.o (.ppcenvr) + . = ALIGN(8192); + *(.text) + . = ALIGN(4); + } =0xFF + PROVIDE (_ecode = .); + .rodata : + { + *(.rodata) + . = ALIGN(4); + } + PROVIDE (_etext = .); + + + PROVIDE (_fdata = .); + .data : + { + *(.data) + . = ALIGN(4); + } + PROVIDE (_edata = .); + + PROVIDE (_fgot = .); + .got : + { + *(.got) + . = ALIGN(4); + } + PROVIDE (_egot = .); + + PROVIDE (__u_boot_cmd_start = .); + .u_boot_cmd : + { + *(.u_boot_cmd) + . = ALIGN(4); + } + PROVIDE (__u_boot_cmd_end = .); + + PROVIDE (reloc_dst_end = .); + /* _reloc_dst_end = .; */ + + PROVIDE (bss_start = .); + PROVIDE (__bss_start = .); + .bss : + { + *(.bss) + . = ALIGN(4); + } + PROVIDE (bss_end = .); + + PROVIDE (_end = .); +} diff --git a/board/r5200/r5200.c b/board/r5200/r5200.c deleted file mode 100644 index 69f3a76..0000000 --- a/board/r5200/r5200.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/m5271.h> -#include <asm/immap_5271.h> - - -int checkboard (void) { - puts ("Board: R5200 Ethernet Module\n"); - return 0; -}; - -long int initdram (int board_type) { - int i; - - /* - * Set CS2 pin to be SD_CS0 - */ - mbar_writeByte(MCF_GPIO_PAR_CS, mbar_readByte(MCF_GPIO_PAR_CS) - | MCF_GPIO_PAR_CS_PAR_CS2); - - mbar_writeByte(MCF_GPIO_PAR_SDRAM, mbar_readByte(MCF_GPIO_PAR_SDRAM) - | MCF_GPIO_PAR_SDRAM_PAR_CSSDCS(0x01)); - - /* - * Check to see if the SDRAM has already been initialized - * by a run control tool - */ - if (!(mbar_readLong(MCF_SDRAMC_DACR0) & MCF_SDRAMC_DACRn_RE)) { - /* - * Initialize DRAM Control Register: DCR - */ - mbar_writeShort(MCF_SDRAMC_DCR, MCF_SDRAMC_DCR_RTIM(0x01) - | MCF_SDRAMC_DCR_RC(0x30)); - - /* - * Initialize DACR0 - */ - mbar_writeLong(MCF_SDRAMC_DACR0, - MCF_SDRAMC_DACRn_BA(CFG_SDRAM_BASE>>18) - | MCF_SDRAMC_DACRn_CASL(0) - | MCF_SDRAMC_DACRn_CBM(3) - | MCF_SDRAMC_DACRn_PS(2)); - - /* - * Initialize DMR0 - */ - mbar_writeLong(MCF_SDRAMC_DMR0, - MCF_SDRAMC_DMRn_BAM_8M - | MCF_SDRAMC_DMRn_V); - - /* - * Set IP bit in DACR - */ - mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) - | MCF_SDRAMC_DACRn_IP); - - /* - * Wait at least 20ns to allow banks to precharge - */ - for (i = 0; i < 5; i++) - asm(" nop"); - - /* - * Write to this block to initiate precharge - */ - *(u16 *)(CFG_SDRAM_BASE) = 0x9696; - - /* - * Set RE bit in DACR - */ - mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) - | MCF_SDRAMC_DACRn_RE); - - - /* - * Wait for at least 8 auto refresh cycles to occur - */ - for (i = 0; i < 2000; i++) - asm(" nop"); - - /* - * Finish the configuration by issuing the MRS. - */ - mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) - | MCF_SDRAMC_DACRn_MRS); - - - /* - * Write to the SDRAM Mode Register - */ - *(u16 *)(CFG_SDRAM_BASE + 0x1000) = 0x9696; - } - - return CFG_SDRAM_SIZE * 1024 * 1024; -}; - -int testdram (void) { - /* TODO: XXX XXX XXX */ - printf ("DRAM test not implemented!\n"); - - return (0); -} diff --git a/board/r7780mp/Makefile b/board/r7780mp/Makefile new file mode 100644 index 0000000..554dca1 --- /dev/null +++ b/board/r7780mp/Makefile @@ -0,0 +1,44 @@ +# +# Copyright (C) 2007,2008 Nobuhiro Iwamatsu +# +# board/r7780mp/Makefile +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := r7780mp.o +SOBJS := lowlevel_init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/cpu/bf533/config.mk b/board/r7780mp/config.mk index 2caa3cc..6a045a1 100644 --- a/cpu/bf533/config.mk +++ b/board/r7780mp/config.mk @@ -1,12 +1,7 @@ -# U-boot - config.mk # -# Copyright (c) 2005-2007 Analog Devices Inc. +# Copyright (C) 2007,2008 Nobuhiro Iwamatsu # -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. +# board/r77870mp/config.mk # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as @@ -20,8 +15,13 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +# +# TEXT_BASE refers to image _after_ relocation. +# +# NOTE: Must match value used in u-boot.lds (in this directory). # -PLATFORM_RELFLAGS += -mcpu=bf533 +TEXT_BASE = 0x0FFC0000 diff --git a/board/r7780mp/lowlevel_init.S b/board/r7780mp/lowlevel_init.S new file mode 100644 index 0000000..eb5d8b7 --- /dev/null +++ b/board/r7780mp/lowlevel_init.S @@ -0,0 +1,428 @@ +/* + * Copyright (C) 2007,2008 Nobuhiro Iwamatsu + * + * u-boot/board/r7780mp/lowlevel_init.S + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/processor.h> + +/* + * Board specific low level init code, called _very_ early in the + * startup sequence. Relocation to SDRAM has not happened yet, no + * stack is available, bss section has not been initialised, etc. + * + * (Note: As no stack is available, no subroutines can be called...). + */ + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + + mov.l CCR_A, r1 /* Address of Cache Control Register */ + mov.l CCR_D, r0 /* Instruction Cache Invalidate */ + mov.l r0, @r1 + + mov.l FRQCR_A, r1 /* Frequency control register */ + mov.l FRQCR_D, r0 + mov.l r0, @r1 + + /* pin_multi_setting */ + mov.l BBG_PMMR_A,r1 + mov.l BBG_PMMR_D_PMSR1,r0 + mov.l r0,@r1 + + mov.l BBG_PMSR1_A,r1 + mov.l BBG_PMSR1_D,r0 + mov.l r0,@r1 + + mov.l BBG_PMMR_A,r1 + mov.l BBG_PMMR_D_PMSR2,r0 + mov.l r0,@r1 + + mov.l BBG_PMSR2_A,r1 + mov.l BBG_PMSR2_D,r0 + mov.l r0,@r1 + + mov.l BBG_PMMR_A,r1 + mov.l BBG_PMMR_D_PMSR3,r0 + mov.l r0,@r1 + + mov.l BBG_PMSR3_A,r1 + mov.l BBG_PMSR3_D,r0 + mov.l r0,@r1 + + mov.l BBG_PMMR_A,r1 + mov.l BBG_PMMR_D_PMSR4,r0 + mov.l r0,@r1 + + mov.l BBG_PMSR4_A,r1 + mov.l BBG_PMSR4_D,r0 + mov.l r0,@r1 + + mov.l BBG_PMMR_A,r1 + mov.l BBG_PMMR_D_PMSRG,r0 + mov.l r0,@r1 + + mov.l BBG_PMSRG_A,r1 + mov.l BBG_PMSRG_D,r0 + mov.l r0,@r1 + + /* cpg_setting */ + mov.l FRQCR_A,r1 + mov.l FRQCR_D,r0 + mov.l r0,@r1 + + mov.l DLLCSR_A,r1 + mov.l DLLCSR_D,r0 + mov.l r0,@r1 + + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + + /* wait 200us */ + mov.l REPEAT0_R3,r3 + mov #0,r2 +repeat0: + add #1,r2 + cmp/hs r3,r2 + bf repeat0 + nop + + /* bsc_setting */ + mov.l MMSELR_A,r1 + mov.l MMSELR_D,r0 + mov.l r0,@r1 + + mov.l BCR_A,r1 + mov.l BCR_D,r0 + mov.l r0,@r1 + + mov.l CS0BCR_A,r1 + mov.l CS0BCR_D,r0 + mov.l r0,@r1 + + mov.l CS1BCR_A,r1 + mov.l CS1BCR_D,r0 + mov.l r0,@r1 + + mov.l CS2BCR_A,r1 + mov.l CS2BCR_D,r0 + mov.l r0,@r1 + + mov.l CS4BCR_A,r1 + mov.l CS4BCR_D,r0 + mov.l r0,@r1 + + mov.l CS5BCR_A,r1 + mov.l CS5BCR_D,r0 + mov.l r0,@r1 + + mov.l CS6BCR_A,r1 + mov.l CS6BCR_D,r0 + mov.l r0,@r1 + + mov.l CS0WCR_A,r1 + mov.l CS0WCR_D,r0 + mov.l r0,@r1 + + mov.l CS1WCR_A,r1 + mov.l CS1WCR_D,r0 + mov.l r0,@r1 + + mov.l CS2WCR_A,r1 + mov.l CS2WCR_D,r0 + mov.l r0,@r1 + + mov.l CS4WCR_A,r1 + mov.l CS4WCR_D,r0 + mov.l r0,@r1 + + mov.l CS5WCR_A,r1 + mov.l CS5WCR_D,r0 + mov.l r0,@r1 + + mov.l CS6WCR_A,r1 + mov.l CS6WCR_D,r0 + mov.l r0,@r1 + + mov.l CS5PCR_A,r1 + mov.l CS5PCR_D,r0 + mov.l r0,@r1 + + mov.l CS6PCR_A,r1 + mov.l CS6PCR_D,r0 + mov.l r0,@r1 + + /* ddr_setting */ + /* wait 200us */ + mov.l REPEAT0_R3,r3 + mov #0,r2 +repeat1: + add #1,r2 + cmp/hs r3,r2 + bf repeat1 + nop + + mov.l MIM_U_A,r0 + mov.l MIM_U_D,r1 + synco + mov.l r1,@r0 + synco + + mov.l MIM_L_A,r0 + mov.l MIM_L_D0,r1 + synco + mov.l r1,@r0 + synco + + mov.l STR_L_A,r0 + mov.l STR_L_D,r1 + synco + mov.l r1,@r0 + synco + + mov.l SDR_L_A,r0 + mov.l SDR_L_D,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + nop + + mov.l SCR_L_A,r0 + mov.l SCR_L_D0,r1 + synco + mov.l r1,@r0 + synco + + mov.l SCR_L_A,r0 + mov.l SCR_L_D1,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + + mov.l EMRS_A,r0 + mov.l EMRS_D,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + + mov.l MRS1_A,r0 + mov.l MRS1_D,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + + mov.l SCR_L_A,r0 + mov.l SCR_L_D2,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + + mov.l SCR_L_A,r0 + mov.l SCR_L_D3,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + + mov.l SCR_L_A,r0 + mov.l SCR_L_D4,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + + mov.l MRS2_A,r0 + mov.l MRS2_D,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + + mov.l SCR_L_A,r0 + mov.l SCR_L_D5,r1 + synco + mov.l r1,@r0 + synco + + /* wait 200us */ + mov.l REPEAT0_R1,r3 + mov #0,r2 +repeat2: + add #1,r2 + cmp/hs r3,r2 + bf repeat2 + + synco + + mov.l MIM_L_A,r0 + mov.l MIM_L_D1,r1 + synco + mov.l r1,@r0 + synco + + rts + nop + .align 4 + +RWTCSR_D_1: .word 0xA507 +RWTCSR_D_2: .word 0xA507 +RWTCNT_D: .word 0x5A00 + +BBG_PMMR_A: .long 0xFF800010 +BBG_PMSR1_A: .long 0xFF800014 +BBG_PMSR2_A: .long 0xFF800018 +BBG_PMSR3_A: .long 0xFF80001C +BBG_PMSR4_A: .long 0xFF800020 +BBG_PMSRG_A: .long 0xFF800024 + +BBG_PMMR_D_PMSR1: .long 0xffffbffd +BBG_PMSR1_D: .long 0x00004002 +BBG_PMMR_D_PMSR2: .long 0xfc21a7ff +BBG_PMSR2_D: .long 0x03de5800 +BBG_PMMR_D_PMSR3: .long 0xfffffff8 +BBG_PMSR3_D: .long 0x00000007 +BBG_PMMR_D_PMSR4: .long 0xdffdfff9 +BBG_PMSR4_D: .long 0x20020006 +BBG_PMMR_D_PMSRG: .long 0xffffffff +BBG_PMSRG_D: .long 0x00000000 + +FRQCR_A: .long FRQCR +DLLCSR_A: .long 0xffc40010 +FRQCR_D: .long 0x40233035 +DLLCSR_D: .long 0x00000000 + +/* for DDR-SDRAM */ +MIM_U_A: .long MIM_1 +MIM_L_A: .long MIM_2 +SCR_U_A: .long SCR_1 +SCR_L_A: .long SCR_2 +STR_U_A: .long STR_1 +STR_L_A: .long STR_2 +SDR_U_A: .long SDR_1 +SDR_L_A: .long SDR_2 + +EMRS_A: .long 0xFEC02000 +MRS1_A: .long 0xFEC00B08 +MRS2_A: .long 0xFEC00308 + +MIM_U_D: .long 0x00004000 +MIM_L_D0: .long 0x03e80009 +MIM_L_D1: .long 0x03e80209 +SCR_L_D0: .long 0x3 +SCR_L_D1: .long 0x2 +SCR_L_D2: .long 0x2 +SCR_L_D3: .long 0x4 +SCR_L_D4: .long 0x4 +SCR_L_D5: .long 0x0 +STR_L_D: .long 0x000f0000 +SDR_L_D: .long 0x00000400 +EMRS_D: .long 0x0 +MRS1_D: .long 0x0 +MRS2_D: .long 0x0 + +/* Cache Controller */ +CCR_A: .long CCR +MMUCR_A: .long MMUCR +RWTCNT_A: .long WTCNT + +CCR_D: .long 0x0000090b +CCR_D_2: .long 0x00000103 +MMUCR_D: .long 0x00000004 +MSTPCR0_D: .long 0x00001001 +MSTPCR2_D: .long 0xffffffff + +/* local Bus State Controller */ +MMSELR_A: .long MMSELR +BCR_A: .long BCR +CS0BCR_A: .long CS0BCR +CS1BCR_A: .long CS1BCR +CS2BCR_A: .long CS2BCR +CS4BCR_A: .long CS4BCR +CS5BCR_A: .long CS5BCR +CS6BCR_A: .long CS6BCR +CS0WCR_A: .long CS0WCR +CS1WCR_A: .long CS1WCR +CS2WCR_A: .long CS2WCR +CS4WCR_A: .long CS4WCR +CS5WCR_A: .long CS5WCR +CS6WCR_A: .long CS6WCR +CS5PCR_A: .long CS5PCR +CS6PCR_A: .long CS6PCR + +MMSELR_D: .long 0xA5A50003 +BCR_D: .long 0x00000000 +CS0BCR_D: .long 0x77777770 +CS1BCR_D: .long 0x77777670 +CS2BCR_D: .long 0x77777770 +CS4BCR_D: .long 0x77777770 +CS5BCR_D: .long 0x77777670 +CS6BCR_D: .long 0x77777770 +CS0WCR_D: .long 0x00020006 +CS1WCR_D: .long 0x00232304 +CS2WCR_D: .long 0x7777770F +CS4WCR_D: .long 0x7777770F +CS5WCR_D: .long 0x00101006 +CS6WCR_D: .long 0x77777703 +CS5PCR_D: .long 0x77000000 +CS6PCR_D: .long 0x77000000 + +REPEAT0_R3: .long 0x00002000 +REPEAT0_R1: .long 0x0000200 diff --git a/board/r7780mp/r7780mp.c b/board/r7780mp/r7780mp.c new file mode 100644 index 0000000..1a37711 --- /dev/null +++ b/board/r7780mp/r7780mp.c @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ide.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/pci.h> +#include "r7780mp.h" + +int checkboard(void) +{ +#if defined(CONFIG_R7780MP) + puts("BOARD: Renesas Solutions R7780MP\n"); +#else + puts("BOARD: Renesas Solutions R7780RP\n"); +#endif + return 0; +} + +int board_init(void) +{ + /* SCIF Enable */ + *(vu_short*)PHCR = 0x0000; + + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_SDRAM_SIZE; + printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + +void led_set_state (unsigned short value) +{ + +} + +void ide_set_reset (int idereset) +{ + /* if reset = 1 IDE reset will be asserted */ + if (idereset){ + (*(vu_short *)FPGA_CFCTL) = 0x432; +#if defined(CONFIG_R7780MP) + (*(vu_short *)FPGA_CFPOW) |= 0x01; +#else + (*(vu_short *)FPGA_CFPOW) |= 0x02; +#endif + (*(vu_short *)FPGA_CFCDINTCLR) = 0x01; + } +} + +#if defined(CONFIG_PCI) +static struct pci_controller hose; +void pci_init_board(void) +{ + pci_sh7780_init( &hose ); +} +#endif diff --git a/board/r7780mp/r7780mp.h b/board/r7780mp/r7780mp.h new file mode 100644 index 0000000..476a413 --- /dev/null +++ b/board/r7780mp/r7780mp.h @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2007 Nobuhiro Iwamatsu + * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * u-boot/board/r7780mp/r7780mp.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BOARD_R7780MP_R7780MP_H_ +#define _BOARD_R7780MP_R7780MP_H_ + +/* R7780MP's FPGA register map */ +#define FPGA_BASE 0xa4000000 +#define FPGA_IRLMSK (FPGA_BASE + 0x00) +#define FPGA_IRLMON (FPGA_BASE + 0x02) +#define FPGA_IRLPRI1 (FPGA_BASE + 0x04) +#define FPGA_IRLPRI2 (FPGA_BASE + 0x06) +#define FPGA_IRLPRI3 (FPGA_BASE + 0x08) +#define FPGA_IRLPRI4 (FPGA_BASE + 0x0A) +#define FPGA_RSTCTL (FPGA_BASE + 0x0C) +#define FPGA_PCIBD (FPGA_BASE + 0x0E) +#define FPGA_PCICD (FPGA_BASE + 0x10) +#define FPGA_EXTGIO (FPGA_BASE + 0x16) +#define FPGA_IVDRMON (FPGA_BASE + 0x18) +#define FPGA_IVDRCR (FPGA_BASE + 0x1A) +#define FPGA_OBLED (FPGA_BASE + 0x1C) +#define FPGA_OBSW (FPGA_BASE + 0x1E) +#define FPGA_TPCTL (FPGA_BASE + 0x100) +#define FPGA_TPDCKCTL (FPGA_BASE + 0x102) +#define FPGA_TPCLR (FPGA_BASE + 0x104) +#define FPGA_TPXPOS (FPGA_BASE + 0x106) +#define FPGA_TPYPOS (FPGA_BASE + 0x108) +#define FPGA_DBSW (FPGA_BASE + 0x200) +#define FPGA_VERSION (FPGA_BASE + 0x700) +#define FPGA_CFCTL (FPGA_BASE + 0x300) +#define FPGA_CFPOW (FPGA_BASE + 0x302) +#define FPGA_CFCDINTCLR (FPGA_BASE + 0x304) +#define FPGA_PMR (FPGA_BASE + 0x900) + +#endif /* _BOARD_R7780RP_R7780RP_H_ */ diff --git a/board/r7780mp/u-boot.lds b/board/r7780mp/u-boot.lds new file mode 100644 index 0000000..e7499e5 --- /dev/null +++ b/board/r7780mp/u-boot.lds @@ -0,0 +1,105 @@ +/* + * Copyrigth (c) 2007,2008 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +SECTIONS +{ + /* + Base address of internal SDRAM is 0x0C000000. + Although size of SDRAM can be either 16 or 32 MBytes, + we assume 16 MBytes (ie ignore upper half if the full + 32 MBytes is present). + + NOTE: This address must match with the definition of + TEXT_BASE in config.mk (in this directory). + + */ + . = 0x08000000 + (128*1024*1024) - (256*1024); + + PROVIDE (reloc_dst = .); + + PROVIDE (_ftext = .); + PROVIDE (_fcode = .); + PROVIDE (_start = .); + + .text : + { + cpu/sh4/start.o (.text) + . = ALIGN(8192); + common/environment.o (.ppcenv) + . = ALIGN(8192); + common/environment.o (.ppcenvr) + . = ALIGN(8192); + *(.text) + . = ALIGN(4); + } =0xFF + PROVIDE (_ecode = .); + .rodata : + { + *(.rodata) + . = ALIGN(4); + } + PROVIDE (_etext = .); + + + PROVIDE (_fdata = .); + .data : + { + *(.data) + . = ALIGN(4); + } + PROVIDE (_edata = .); + + PROVIDE (_fgot = .); + .got : + { + *(.got) + . = ALIGN(4); + } + PROVIDE (_egot = .); + + PROVIDE (__u_boot_cmd_start = .); + .u_boot_cmd : + { + *(.u_boot_cmd) + . = ALIGN(4); + } + PROVIDE (__u_boot_cmd_end = .); + + PROVIDE (reloc_dst_end = .); + /* _reloc_dst_end = .; */ + + PROVIDE (bss_start = .); + PROVIDE (__bss_start = .); + .bss : + { + *(.bss) + . = ALIGN(4); + } + PROVIDE (bss_end = .); + + PROVIDE (_end = .); +} diff --git a/common/cmd_flash.c b/common/cmd_flash.c index f56443e..db5dec9 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -41,6 +41,7 @@ int find_dev_and_part(const char *id, struct mtd_device **dev, u8 *part_num, struct part_info **part); #endif +#ifndef CFG_NO_FLASH extern flash_info_t flash_info[]; /* info for FLASH chips */ /* @@ -275,15 +276,19 @@ flash_fill_sect_ranges (ulong addr_first, ulong addr_last, return rcode; } +#endif /* CFG_NO_FLASH */ int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { +#ifndef CFG_NO_FLASH ulong bank; +#endif #ifdef CONFIG_HAS_DATAFLASH dataflash_print_info(); #endif +#ifndef CFG_NO_FLASH if (argc == 1) { /* print info for all FLASH banks */ for (bank=0; bank <CFG_MAX_FLASH_BANKS; ++bank) { printf ("\nBank # %ld: ", bank+1); @@ -301,11 +306,13 @@ int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } printf ("\nBank # %ld: ", bank); flash_print_info (&flash_info[bank-1]); +#endif /* CFG_NO_FLASH */ return 0; } int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { +#ifndef CFG_NO_FLASH flash_info_t *info; ulong bank, addr_first, addr_last; int n, sect_first, sect_last; @@ -397,8 +404,12 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) rcode = flash_sect_erase(addr_first, addr_last); return rcode; +#else + return 0; +#endif /* CFG_NO_FLASH */ } +#ifndef CFG_NO_FLASH int flash_sect_erase (ulong addr_first, ulong addr_last) { flash_info_t *info; @@ -439,12 +450,17 @@ int flash_sect_erase (ulong addr_first, ulong addr_last) } return rcode; } +#endif /* CFG_NO_FLASH */ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { +#ifndef CFG_NO_FLASH flash_info_t *info; - ulong bank, addr_first, addr_last; - int i, p, n, sect_first, sect_last; + ulong bank; + int i, n, sect_first, sect_last; +#endif /* CFG_NO_FLASH */ + ulong addr_first, addr_last; + int p; #if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE) struct mtd_device *dev; struct part_info *part; @@ -487,6 +503,7 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } #endif +#ifndef CFG_NO_FLASH if (strcmp(argv[2], "all") == 0) { for (bank=1; bank<=CFG_MAX_FLASH_BANKS; ++bank) { info = &flash_info[bank-1]; @@ -611,10 +628,11 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 1; } rcode = flash_sect_protect (p, addr_first, addr_last); +#endif /* CFG_NO_FLASH */ return rcode; } - +#ifndef CFG_NO_FLASH int flash_sect_protect (int p, ulong addr_first, ulong addr_last) { flash_info_t *info; @@ -667,6 +685,7 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last) } return rcode; } +#endif /* CFG_NO_FLASH */ /**************************************************/ diff --git a/common/cmd_mem.c b/common/cmd_mem.c index 4262e26..d6d7a5b 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -492,7 +492,11 @@ int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } /* Check if we are copying from DataFlash to RAM */ - if (addr_dataflash(addr) && !addr_dataflash(dest) && (addr2info(dest)==NULL) ){ + if (addr_dataflash(addr) && !addr_dataflash(dest) +#ifndef CFG_NO_FLASH + && (addr2info(dest) == NULL) +#endif + ){ int rc; rc = read_dataflash(addr, count * size, (char *) dest); if (rc != 1) { diff --git a/common/cmd_mii.c b/common/cmd_mii.c index 31ac43d..fa753dd 100644 --- a/common/cmd_mii.c +++ b/common/cmd_mii.c @@ -306,7 +306,7 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 1; } -#if defined(CONFIG_8xx) || defined(CONFIG_MCF532x) +#if defined(CONFIG_8xx) || defined(CONFIG_MCF532x) || defined(CONFIG_MII_INIT) mii_init (); #endif diff --git a/cpu/arm1136/Makefile b/cpu/arm1136/Makefile index d5ac7d3..7701b03 100644 --- a/cpu/arm1136/Makefile +++ b/cpu/arm1136/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o -COBJS = interrupts.o cpu.o +COBJS = cpu.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/cpu/arm1136/cpu.c b/cpu/arm1136/cpu.c index fa78eaa..90e9553 100644 --- a/cpu/arm1136/cpu.c +++ b/cpu/arm1136/cpu.c @@ -33,9 +33,6 @@ #include <common.h> #include <command.h> -#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR) -#include <asm/arch/omap2420.h> -#endif #ifdef CONFIG_USE_IRQ DECLARE_GLOBAL_DATA_PTR; @@ -47,10 +44,10 @@ static unsigned long read_p15_c1 (void) unsigned long value; __asm__ __volatile__( - "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" - : "=r" (value) - : - : "memory"); + "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" + : "=r" (value) + : + : "memory"); return value; } diff --git a/cpu/arm1136/mx31/Makefile b/cpu/arm1136/mx31/Makefile new file mode 100644 index 0000000..1fc8eea --- /dev/null +++ b/cpu/arm1136/mx31/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundatio; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +COBJS = interrupts.o serial.o generic.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +####################################################################### +## + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend diff --git a/cpu/arm1136/mx31/generic.c b/cpu/arm1136/mx31/generic.c new file mode 100644 index 0000000..297d616 --- /dev/null +++ b/cpu/arm1136/mx31/generic.c @@ -0,0 +1,99 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/mx31-regs.h> + +static u32 mx31_decode_pll(u32 reg, u32 infreq) +{ + u32 mfi = (reg >> 10) & 0xf; + u32 mfn = reg & 0x3f; + u32 mfd = (reg >> 16) & 0x3f; + u32 pd = (reg >> 26) & 0xf; + + mfi = mfi <= 5 ? 5 : mfi; + mfd += 1; + pd += 1; + + return ((2 * (infreq >> 10) * (mfi * mfd + mfn)) / + (mfd * pd)) << 10; +} + +u32 mx31_get_mpl_dpdgck_clk(void) +{ + u32 infreq; + + if ((__REG(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM) + infreq = CONFIG_MX31_CLK32 * 1024; + else + infreq = CONFIG_MX31_HCLK_FREQ; + + return mx31_decode_pll(__REG(CCM_MPCTL), infreq); } + +u32 mx31_get_mcu_main_clk(void) +{ + /* For now we assume mpl_dpdgck_clk == mcu_main_clk + * which should be correct for most boards + */ + return mx31_get_mpl_dpdgck_clk(); +} + +u32 mx31_get_ipg_clk(void) +{ + u32 freq = mx31_get_mcu_main_clk(); + u32 pdr0 = __REG(CCM_PDR0); + + freq /= ((pdr0 >> 3) & 0x7) + 1; + freq /= ((pdr0 >> 6) & 0x3) + 1; + + return freq; +} + +void mx31_dump_clocks(void) +{ + u32 cpufreq = mx31_get_mcu_main_clk(); + printf("mx31 cpu clock: %dMHz\n", cpufreq / 1000000); + printf("ipg clock : %dHz\n", mx31_get_ipg_clk()); +} + +void mx31_gpio_mux(unsigned long mode) +{ + unsigned long reg, shift, tmp; + + reg = IOMUXC_BASE + (mode & 0xfc); + shift = (~mode & 0x3) * 8; + + tmp = __REG(reg); + tmp &= ~(0xff << shift); + tmp |= ((mode >> 8) & 0xff) << shift; + __REG(reg) = tmp; +} + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + printf("CPU: Freescale i.MX31 at %d MHz\n", + mx31_get_mcu_main_clk() / 1000000); + return 0; +} +#endif diff --git a/cpu/arm1136/mx31/interrupts.c b/cpu/arm1136/mx31/interrupts.c new file mode 100644 index 0000000..189f601 --- /dev/null +++ b/cpu/arm1136/mx31/interrupts.c @@ -0,0 +1,113 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/mx31-regs.h> + +#define TIMER_BASE 0x53f90000 /* General purpose timer 1 */ + +/* General purpose timers registers */ +#define GPTCR __REG(TIMER_BASE) /* Control register */ +#define GPTPR __REG(TIMER_BASE + 0x4) /* Prescaler register */ +#define GPTSR __REG(TIMER_BASE + 0x8) /* Status register */ +#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */ + +/* General purpose timers bitfields */ +#define GPTCR_SWR (1<<15) /* Software reset */ +#define GPTCR_FRR (1<<9) /* Freerun / restart */ +#define GPTCR_CLKSOURCE_32 (4<<6) /* Clock source */ +#define GPTCR_TEN (1) /* Timer enable */ + +/* + * nothing really to do with interrupts, just starts up a counter. + */ +int interrupt_init(void) +{ + int i; + + /* setup GP Timer 1 */ + GPTCR = GPTCR_SWR; + for (i = 0; i < 100; i++) GPTCR = 0; /* We have no udelay by now */ + GPTPR = 0; /* 32Khz */ + /* Freerun Mode, PERCLK1 input */ + GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN; + + return 0; +} + +void reset_timer_masked(void) +{ + GPTCR = 0; + /* Freerun Mode, PERCLK1 input*/ + GPTCR = GPTCR_CLKSOURCE_32 | GPTCR_TEN; +} + +ulong get_timer_masked(void) +{ + ulong val = GPTCNT; + return val; +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void set_timer(ulong t) +{ +} + +/* delay x useconds AND perserve advance timstamp value */ +void udelay(unsigned long usec) +{ + ulong tmo, tmp; + + if (usec >= 1000) { + /* "big" number, spread normalization to seconds */ + /* start to normalize for usec to ticks per sec */ + tmo = usec / 1000; + /* find number of "ticks" to wait to achieve target */ + tmo *= CFG_HZ; + tmo /= 1000; /* finish normalize. */ + } else { + /* else small number, don't kill it prior to HZ multiply */ + tmo = usec * CFG_HZ; + tmo /= (1000*1000); + } + + tmp = get_timer(0); /* get current timestamp */ + if ((tmo + tmp + 1) < tmp) + /* setting this forward will roll time stamp */ + /* reset "advancing" timestamp to 0, set lastinc value */ + reset_timer_masked(); + else + /* else, set advancing stamp wake up time */ + tmo += tmp; + while (get_timer_masked() < tmo)/* loop till event */ + /*NOP*/; +} + +void reset_cpu(ulong addr) +{ + __REG16(WDOG_BASE) = 4; +} diff --git a/cpu/arm1136/mx31/serial.c b/cpu/arm1136/mx31/serial.c new file mode 100644 index 0000000..f7e1b3b --- /dev/null +++ b/cpu/arm1136/mx31/serial.c @@ -0,0 +1,230 @@ +/* + * (c) 2007 Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <common.h> + +#if defined CONFIG_MX31_UART + +#include <asm/arch/mx31.h> + +#define __REG(x) (*((volatile u32 *)(x))) + +#ifdef CFG_MX31_UART1 +#define UART_PHYS 0x43f90000 +#elif defined(CFG_MX31_UART2) +#define UART_PHYS 0x43f94000 +#elif defined(CFG_MX31_UART3) +#define UART_PHYS 0x5000c000 +#elif defined(CFG_MX31_UART4) +#define UART_PHYS 0x43fb0000 +#elif defined(CFG_MX31_UART5) +#define UART_PHYS 0x43fb4000 +#else +#error "define CFG_MX31_UARTx to use the mx31 UART driver" +#endif + +/* Register definitions */ +#define URXD 0x0 /* Receiver Register */ +#define UTXD 0x40 /* Transmitter Register */ +#define UCR1 0x80 /* Control Register 1 */ +#define UCR2 0x84 /* Control Register 2 */ +#define UCR3 0x88 /* Control Register 3 */ +#define UCR4 0x8c /* Control Register 4 */ +#define UFCR 0x90 /* FIFO Control Register */ +#define USR1 0x94 /* Status Register 1 */ +#define USR2 0x98 /* Status Register 2 */ +#define UESC 0x9c /* Escape Character Register */ +#define UTIM 0xa0 /* Escape Timer Register */ +#define UBIR 0xa4 /* BRM Incremental Register */ +#define UBMR 0xa8 /* BRM Modulator Register */ +#define UBRC 0xac /* Baud Rate Count Register */ +#define UTS 0xb4 /* UART Test Register (mx31) */ + +/* UART Control Register Bit Fields.*/ +#define URXD_CHARRDY (1<<15) +#define URXD_ERR (1<<14) +#define URXD_OVRRUN (1<<13) +#define URXD_FRMERR (1<<12) +#define URXD_BRK (1<<11) +#define URXD_PRERR (1<<10) +#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ +#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ +#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ +#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ +#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ +#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ +#define UCR1_IREN (1<<7) /* Infrared interface enable */ +#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ +#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ +#define UCR1_SNDBRK (1<<4) /* Send break */ +#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ +#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ +#define UCR1_DOZE (1<<1) /* Doze */ +#define UCR1_UARTEN (1<<0) /* UART enabled */ +#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ +#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ +#define UCR2_CTSC (1<<13) /* CTS pin control */ +#define UCR2_CTS (1<<12) /* Clear to send */ +#define UCR2_ESCEN (1<<11) /* Escape enable */ +#define UCR2_PREN (1<<8) /* Parity enable */ +#define UCR2_PROE (1<<7) /* Parity odd/even */ +#define UCR2_STPB (1<<6) /* Stop */ +#define UCR2_WS (1<<5) /* Word size */ +#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ +#define UCR2_TXEN (1<<2) /* Transmitter enabled */ +#define UCR2_RXEN (1<<1) /* Receiver enabled */ +#define UCR2_SRST (1<<0) /* SW reset */ +#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ +#define UCR3_PARERREN (1<<12) /* Parity enable */ +#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ +#define UCR3_DSR (1<<10) /* Data set ready */ +#define UCR3_DCD (1<<9) /* Data carrier detect */ +#define UCR3_RI (1<<8) /* Ring indicator */ +#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ +#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ +#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ +#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ +#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */ +#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */ +#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ +#define UCR3_BPEN (1<<0) /* Preset registers enable */ +#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ +#define UCR4_INVR (1<<9) /* Inverted infrared reception */ +#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ +#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ +#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ +#define UCR4_IRSC (1<<5) /* IR special case */ +#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ +#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ +#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ +#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ +#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ +#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ +#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ +#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ +#define USR1_RTSS (1<<14) /* RTS pin status */ +#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ +#define USR1_RTSD (1<<12) /* RTS delta */ +#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ +#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ +#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ +#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ +#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ +#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ +#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ +#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ +#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ +#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ +#define USR2_IDLE (1<<12) /* Idle condition */ +#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ +#define USR2_WAKE (1<<7) /* Wake */ +#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ +#define USR2_TXDC (1<<3) /* Transmitter complete */ +#define USR2_BRCD (1<<2) /* Break condition */ +#define USR2_ORE (1<<1) /* Overrun error */ +#define USR2_RDR (1<<0) /* Recv data ready */ +#define UTS_FRCPERR (1<<13) /* Force parity error */ +#define UTS_LOOP (1<<12) /* Loop tx and rx */ +#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ +#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ +#define UTS_TXFULL (1<<4) /* TxFIFO full */ +#define UTS_RXFULL (1<<3) /* RxFIFO full */ +#define UTS_SOFTRST (1<<0) /* Software reset */ + +DECLARE_GLOBAL_DATA_PTR; + +void serial_setbrg(void) +{ + u32 clk = mx31_get_ipg_clk(); + + if (!gd->baudrate) + gd->baudrate = CONFIG_BAUDRATE; + + __REG(UART_PHYS + UFCR) = 4 << 7; /* divide input clock by 2 */ + __REG(UART_PHYS + UBIR) = 0xf; + __REG(UART_PHYS + UBMR) = clk / (2 * gd->baudrate); + +} + +int serial_getc(void) +{ + while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY); + return __REG(UART_PHYS + URXD); +} + +void serial_putc(const char c) +{ + __REG(UART_PHYS + UTXD) = c; + + /* wait for transmitter to be ready */ + while (!(__REG(UART_PHYS + UTS) & UTS_TXEMPTY)); + + /* If \n, also do \r */ + if (c == '\n') + serial_putc('\r'); +} + +/* + * Test whether a character is in the RX buffer */ +int serial_tstc(void) +{ + /* If receive fifo is empty, return false */ + if (__REG(UART_PHYS + UTS) & UTS_RXEMPTY) + return 0; + return 1; +} + +void serial_puts(const char *s) +{ + while (*s) { + serial_putc(*s++); + } +} + +/* + * Initialise the serial port with the given baudrate. The settings + * are always 8 data bits, no parity, 1 stop bit, no start bits. + * + */ +int serial_init(void) +{ + __REG(UART_PHYS + UCR1) = 0x0; + __REG(UART_PHYS + UCR2) = 0x0; + + while (!(__REG(UART_PHYS + UCR2) & UCR2_SRST)); + + __REG(UART_PHYS + UCR3) = 0x0704; + __REG(UART_PHYS + UCR4) = 0x8000; + __REG(UART_PHYS + UESC) = 0x002b; + __REG(UART_PHYS + UTIM) = 0x0; + + __REG(UART_PHYS + UTS) = 0x0; + + serial_setbrg(); + + __REG(UART_PHYS + UCR2) = UCR2_WS | UCR2_IRTS | UCR2_RXEN | \ + UCR2_TXEN | UCR2_SRST; + + __REG(UART_PHYS + UCR1) = UCR1_UARTEN; + + return 0; +} + + +#endif /* CONFIG_MX31 */ diff --git a/cpu/bf533/Makefile b/cpu/arm1136/omap24xx/Makefile index ad48f1c..39b0a82 100644 --- a/cpu/bf533/Makefile +++ b/cpu/arm1136/omap24xx/Makefile @@ -1,8 +1,5 @@ -# U-boot - Makefile # -# Copyright (c) 2005-2007 Analog Devices Inc. -# -# (C) Copyright 2000-2006 +# (C) Copyright 2000-2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -10,34 +7,31 @@ # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of +# published by the Free Software Foundatio; either version 2 of # the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA # include $(TOPDIR)/config.mk -LIB = $(obj)lib$(CPU).a - -SOBJS = start.o start1.o interrupt.o cache.o flush.o init_sdram.o -COBJS = cpu.o traps.o ints.o serial.o interrupts.o video.o +LIB = $(obj)lib$(SOC).a -EXTRA = init_sdram_bootrom_initblock.o +COBJS = interrupts.o +SOBJS = start.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) -START := $(addprefix $(obj),$(START)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -all: $(obj).depend $(START) $(LIB) $(obj).depend $(EXTRA) +all: $(obj).depend $(LIB) $(LIB): $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) diff --git a/cpu/arm1136/interrupts.c b/cpu/arm1136/omap24xx/interrupts.c index 491c902..8503b24 100644..100755 --- a/cpu/arm1136/interrupts.c +++ b/cpu/arm1136/omap24xx/interrupts.c @@ -32,31 +32,28 @@ #include <common.h> #include <asm/arch/bits.h> - -#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR) -# include <asm/arch/omap2420.h> -#endif +#include <asm/arch/omap2420.h> #define TIMER_LOAD_VAL 0 /* macro to read the 32 bit timer */ -#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+TCRR)) - -#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR) -/* Use the IntegratorCP function from board/integratorcp.c */ -#else +#define READ_TIMER (*((volatile ulong*)(CFG_TIMERBASE+TCRR))) static ulong timestamp; static ulong lastinc; -/* nothing really to do with interrupts, just starts up a counter. */ -int interrupt_init (void) +/* + * nothing really to do with interrupts, just starts up a counter. + */ +int interrupt_init(void) { int32_t val; /* Start the counter ticking up */ - *((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; /* reload value on overflow*/ - val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0; /* mask to enable timer*/ + /* reload value on overflow*/ + *((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; + /* mask to enable timer*/ + val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0; *((int32_t *) (CFG_TIMERBASE + TCLR)) = val; /* start timer */ reset_timer_masked(); /* init the timestamp and lastinc value */ @@ -66,82 +63,99 @@ int interrupt_init (void) /* * timer without interrupts */ -void reset_timer (void) +void reset_timer(void) { - reset_timer_masked (); + reset_timer_masked(); } -ulong get_timer (ulong base) +ulong get_timer(ulong base) { - return get_timer_masked () - base; + return get_timer_masked() - base; } -void set_timer (ulong t) +void set_timer(ulong t) { timestamp = t; } /* delay x useconds AND perserve advance timstamp value */ -void udelay (unsigned long usec) +void udelay(unsigned long usec) { ulong tmo, tmp; - if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ - tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */ - tmo /= 1000; /* finish normalize. */ - } else { /* else small number, don't kill it prior to HZ multiply */ + /* if "big" number, spread normalization to seconds */ + if (usec >= 1000) { + /* start to normalize for usec to ticks per sec */ + tmo = usec / 1000; + /* find number of "ticks" to wait to achieve target */ + tmo *= CFG_HZ; + /* finish normalize. */ + tmo /= 1000; + } else { + /* else small number, don't kill it prior to HZ multiply */ tmo = usec * CFG_HZ; tmo /= (1000*1000); } - - tmp = get_timer (0); /* get current timestamp */ - if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */ - reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastinc value */ + /* get current timestamp */ + tmp = get_timer(0); + if ((tmo + tmp + 1) < tmp) + /* setting this forward will roll time stamp */ + /* reset "advancing" timestamp to 0, set lastinc value */ + reset_timer_masked(); else - tmo += tmp; /* else, set advancing stamp wake up time */ - while (get_timer_masked () < tmo)/* loop till event */ + /* else, set advancing stamp wake up time */ + tmo += tmp; + while (get_timer_masked() < tmo)/* loop till event */ /*NOP*/; } -void reset_timer_masked (void) +void reset_timer_masked(void) { /* reset time */ - lastinc = READ_TIMER; /* capture current incrementer value time */ - timestamp = 0; /* start "advancing" time stamp from 0 */ + /* capture current incrementer value time */ + lastinc = READ_TIMER; + /* start "advancing" time stamp from 0 */ + timestamp = 0; } -ulong get_timer_masked (void) +ulong get_timer_masked(void) { - ulong now = READ_TIMER; /* current tick value */ + ulong now = READ_TIMER; /* current tick value */ - if (now >= lastinc) /* normal mode (non roll) */ - timestamp += (now - lastinc); /* move stamp fordward with absoulte diff ticks */ - else /* we have rollover of incrementer */ + /* normal mode (non roll) */ + if (now >= lastinc) + /* move stamp forward with absolute diff ticks */ + timestamp += (now - lastinc); + else + /* we have rollover of incrementer */ timestamp += (0xFFFFFFFF - lastinc) + now; lastinc = now; return timestamp; } /* waits specified delay value and resets timestamp */ -void udelay_masked (unsigned long usec) +void udelay_masked(unsigned long usec) { ulong tmo; ulong endtime; signed long diff; - if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ - tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */ - tmo /= 1000; /* finish normalize. */ - } else { /* else small number, don't kill it prior to HZ multiply */ + if (usec >= 1000) { + /* "big" number, spread normalization to seconds */ + /* start to normalize for usec to ticks per sec */ + tmo = usec / 1000; + /* find number of "ticks" to wait to achieve target */ + tmo *= CFG_HZ; + tmo /= 1000;/* finish normalize. */ + } else { + /* else small number, don't kill it prior to HZ multiply */ tmo = usec * CFG_HZ; tmo /= (1000*1000); } - endtime = get_timer_masked () + tmo; + endtime = get_timer_masked() + tmo; do { - ulong now = get_timer_masked (); + ulong now = get_timer_masked(); diff = endtime - now; } while (diff >= 0); } @@ -158,10 +172,9 @@ unsigned long long get_ticks(void) * This function is derived from PowerPC code (timebase clock frequency). * On ARM it returns the number of timer ticks per second. */ -ulong get_tbclk (void) +ulong get_tbclk(void) { ulong tbclk; tbclk = CFG_HZ; return tbclk; } -#endif /* !Integrator/CP */ diff --git a/cpu/arm1136/omap24xx/start.S b/cpu/arm1136/omap24xx/start.S new file mode 100644 index 0000000..5634312 --- /dev/null +++ b/cpu/arm1136/omap24xx/start.S @@ -0,0 +1,42 @@ +/* + * armboot - Startup Code for OMP2420/ARM1136 CPU-core + * + * Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com> + * + * Copyright (c) 2001 Marius Gr??ger <mag@sysgo.de> + * Copyright (c) 2002 Alex Z??pke <azu@sysgo.de> + * Copyright (c) 2002 Gary Jennejohn <gj@denx.de> + * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com> + * Copyright (c) 2003 Kshitij <kshitij@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/omap2420.h> + +.globl reset_cpu +reset_cpu: + ldr r1, rstctl /* get addr for global reset reg */ + mov r3, #0x2 /* full reset pll+mpu */ + str r3, [r1] /* force reset */ + mov r0, r0 +_loop_forever: + b _loop_forever +rstctl: + .word PM_RSTCTRL_WKUP diff --git a/cpu/arm1136/start.S b/cpu/arm1136/start.S index 8b765f1..56009d0 100644 --- a/cpu/arm1136/start.S +++ b/cpu/arm1136/start.S @@ -30,9 +30,6 @@ #include <config.h> #include <version.h> -#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR) -#include <asm/arch/omap2420.h> -#endif .globl _start _start: b reset #ifdef CONFIG_ONENAND_IPL @@ -438,22 +435,4 @@ fiq: arm1136_cache_flush: mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache mov pc, lr @ back to caller - -#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR) -/* Use the IntegratorCP function from board/integratorcp/platform.S */ -#else - - .align 5 -.globl reset_cpu -reset_cpu: - ldr r1, rstctl /* get addr for global reset reg */ - mov r3, #0x2 /* full reset pll+mpu */ - str r3, [r1] /* force reset */ - mov r0, r0 -_loop_forever: - b _loop_forever -rstctl: - .word PM_RSTCTRL_WKUP - -#endif #endif /* CONFIG_ONENAND_IPL */ diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S index 1902bd0..98363eb 100644 --- a/cpu/arm920t/at91rm9200/lowlevel_init.S +++ b/cpu/arm920t/at91rm9200/lowlevel_init.S @@ -46,7 +46,7 @@ #define MC_ASR 0xFFFFFF04 #define MC_AASR 0xFFFFFF08 #define EBI_CFGR 0xFFFFFF64 -#define SMC2_CSR 0xFFFFFF70 +#define SMC_CSR0 0xFFFFFF70 /* clocks */ #define PLLAR 0xFFFFFC28 @@ -146,8 +146,8 @@ SMRDATA: .word MC_AASR_VAL .word EBI_CFGR .word EBI_CFGR_VAL - .word SMC2_CSR - .word SMC2_CSR_VAL + .word SMC_CSR0 + .word SMC_CSR0_VAL .word PLLAR .word PLLAR_VAL .word PLLBR diff --git a/cpu/arm926ejs/at91cap9/spi.c b/cpu/arm926ejs/at91cap9/spi.c deleted file mode 100644 index 0953820..0000000 --- a/cpu/arm926ejs/at91cap9/spi.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Driver for ATMEL DataFlash support - * Author : Hamid Ikdoumi (Atmel) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include <config.h> -#include <common.h> -#include <asm/hardware.h> - -#ifdef CONFIG_HAS_DATAFLASH -#include <dataflash.h> - -/* Max Value = 10MHz to be compliant to the Continuous Array Read function */ -#define AT91C_SPI_CLK 10000000 - -/* AC Characteristics: DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ -#define DATAFLASH_TCSS (0xFA << 16) -#define DATAFLASH_TCHS (0x8 << 24) - -#define AT91C_TIMEOUT_WRDY 200000 -#define AT91C_SPI_PCS0_DATAFLASH_CARD 0xE /* Chip Select 0: NPCS0%1110 */ -#define AT91C_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3: NPCS3%0111 */ - -void AT91F_SpiInit(void) -{ - /* Reset the SPI */ - AT91C_BASE_SPI0->SPI_CR = AT91C_SPI_SWRST; - - /* Configure SPI in Master Mode with No CS selected !!! */ - AT91C_BASE_SPI0->SPI_MR = - AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS; - - /* Configure CS0 */ - AT91C_BASE_SPI0->SPI_CSR[0] = - AT91C_SPI_CPOL | - (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | - (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | - ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); -} - -void AT91F_SpiEnable(int cs) -{ - switch (cs) { - case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ - AT91C_BASE_SPI0->SPI_MR &= 0xFFF0FFFF; - AT91C_BASE_SPI0->SPI_MR |= - ((AT91C_SPI_PCS0_DATAFLASH_CARD<<16) & AT91C_SPI_PCS); - break; - case 3: - AT91C_BASE_SPI0->SPI_MR &= 0xFFF0FFFF; - AT91C_BASE_SPI0->SPI_MR |= - ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS); - break; - } - - /* SPI_Enable */ - AT91C_BASE_SPI0->SPI_CR = AT91C_SPI_SPIEN; -} - -unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) -{ - unsigned int timeout; - - pDesc->state = BUSY; - - AT91C_BASE_SPI0->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; - - /* Initialize the Transmit and Receive Pointer */ - AT91C_BASE_SPI0->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt; - AT91C_BASE_SPI0->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt; - - /* Intialize the Transmit and Receive Counters */ - AT91C_BASE_SPI0->SPI_RCR = pDesc->rx_cmd_size; - AT91C_BASE_SPI0->SPI_TCR = pDesc->tx_cmd_size; - - if (pDesc->tx_data_size != 0) { - /* Initialize the Next Transmit and Next Receive Pointer */ - AT91C_BASE_SPI0->SPI_RNPR = (unsigned int)pDesc->rx_data_pt; - AT91C_BASE_SPI0->SPI_TNPR = (unsigned int)pDesc->tx_data_pt; - - /* Intialize the Next Transmit and Next Receive Counters */ - AT91C_BASE_SPI0->SPI_RNCR = pDesc->rx_data_size; - AT91C_BASE_SPI0->SPI_TNCR = pDesc->tx_data_size; - } - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); - timeout = 0; - - AT91C_BASE_SPI0->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN; - while (!(AT91C_BASE_SPI0->SPI_SR & AT91C_SPI_RXBUFF) && - ((timeout = get_timer_masked()) < CFG_SPI_WRITE_TOUT)); - AT91C_BASE_SPI0->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; - pDesc->state = IDLE; - - if (timeout >= CFG_SPI_WRITE_TOUT) { - printf("Error Timeout\n\r"); - return DATAFLASH_ERROR; - } - - return DATAFLASH_OK; -} -#endif diff --git a/cpu/arm926ejs/at91cap9/Makefile b/cpu/arm926ejs/at91sam9/Makefile index bf15e1e..203abc2 100644 --- a/cpu/arm926ejs/at91cap9/Makefile +++ b/cpu/arm926ejs/at91sam9/Makefile @@ -25,11 +25,14 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).a -COBJS = ether.o timer.o spi.o usb.o +COBJS-y += ether.o +COBJS-y += timer.o +COBJS-$(CONFIG_HAS_DATAFLASH) +=spi.o +COBJS-y += usb.o SOBJS = lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) all: $(obj).depend $(LIB) diff --git a/cpu/arm926ejs/at91cap9/config.mk b/cpu/arm926ejs/at91sam9/config.mk index ca2cae1..ca2cae1 100644 --- a/cpu/arm926ejs/at91cap9/config.mk +++ b/cpu/arm926ejs/at91sam9/config.mk diff --git a/cpu/arm926ejs/at91cap9/ether.c b/cpu/arm926ejs/at91sam9/ether.c index b7958d5..e4f5601 100644 --- a/cpu/arm926ejs/at91cap9/ether.c +++ b/cpu/arm926ejs/at91sam9/ether.c @@ -23,13 +23,13 @@ */ #include <common.h> -#include <asm/arch/AT91CAP9.h> +#include <asm/arch/hardware.h> extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); #if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET) -void at91cap9_eth_initialize(bd_t *bi) +void at91sam9_eth_initialize(bd_t *bi) { - macb_eth_initialize(0, (void *)AT91C_BASE_MACB, 0x00); + macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); } #endif diff --git a/cpu/arm926ejs/at91cap9/lowlevel_init.S b/cpu/arm926ejs/at91sam9/lowlevel_init.S index 24d950c..40a3f6a 100644 --- a/cpu/arm926ejs/at91cap9/lowlevel_init.S +++ b/cpu/arm926ejs/at91sam9/lowlevel_init.S @@ -1,5 +1,5 @@ /* - * AT91CAP9 setup stuff + * AT91CAP9/SAM9 setup stuff * * (C) Copyright 2007-2008 * Stelian Pop <stelian.pop <at> leadtechdesign.com> diff --git a/cpu/arm926ejs/at91sam9/spi.c b/cpu/arm926ejs/at91sam9/spi.c new file mode 100644 index 0000000..c9fe6d8 --- /dev/null +++ b/cpu/arm926ejs/at91sam9/spi.c @@ -0,0 +1,157 @@ +/* + * Driver for ATMEL DataFlash support + * Author : Hamid Ikdoumi (Atmel) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> +#include <asm/arch/at91_pio.h> +#include <asm/arch/at91_spi.h> + +#include <dataflash.h> + +#define AT91_SPI_PCS0_DATAFLASH_CARD 0xE /* Chip Select 0: NPCS0%1110 */ +#define AT91_SPI_PCS1_DATAFLASH_CARD 0xD /* Chip Select 0: NPCS0%1101 */ +#define AT91_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3: NPCS3%0111 */ + +void AT91F_SpiInit(void) +{ + /* Reset the SPI */ + writel(AT91_SPI_SWRST, AT91_BASE_SPI + AT91_SPI_CR); + + /* Configure SPI in Master Mode with No CS selected !!! */ + writel(AT91_SPI_MSTR | AT91_SPI_MODFDIS | AT91_SPI_PCS, + AT91_BASE_SPI + AT91_SPI_MR); + + /* Configure CS0 */ + writel(AT91_SPI_NCPHA | + (AT91_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), + AT91_BASE_SPI + AT91_SPI_CSR(0)); + +#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS1 + /* Configure CS1 */ + writel(AT91_SPI_NCPHA | + (AT91_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), + AT91_BASE_SPI + AT91_SPI_CSR(1)); +#endif + +#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS3 + /* Configure CS3 */ + writel(AT91_SPI_NCPHA | + (AT91_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), + AT91_BASE_SPI + AT91_SPI_CSR(3)); +#endif + + /* SPI_Enable */ + writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR); + + while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_SPIENS)); + + /* + * Add tempo to get SPI in a safe state. + * Should not be needed for new silicon (Rev B) + */ + udelay(500000); + readl(AT91_BASE_SPI + AT91_SPI_SR); + readl(AT91_BASE_SPI + AT91_SPI_RDR); + +} + +void AT91F_SpiEnable(int cs) +{ + unsigned long mode; + + switch (cs) { + case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ + mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode &= 0xFFF0FFFF; + writel(mode | ((AT91_SPI_PCS0_DATAFLASH_CARD<<16) & AT91_SPI_PCS), + AT91_BASE_SPI + AT91_SPI_MR); + break; + case 1: /* Configure SPI CS1 for Serial DataFlash AT45DBxx */ + mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode &= 0xFFF0FFFF; + writel(mode | ((AT91_SPI_PCS1_DATAFLASH_CARD<<16) & AT91_SPI_PCS), + AT91_BASE_SPI + AT91_SPI_MR); + break; + case 3: + mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode &= 0xFFF0FFFF; + writel(mode | ((AT91_SPI_PCS3_DATAFLASH_CARD<<16) & AT91_SPI_PCS), + AT91_BASE_SPI + AT91_SPI_MR); + break; + } + + /* SPI_Enable */ + writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR); +} + +unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc); + +unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) +{ + unsigned int timeout; + + pDesc->state = BUSY; + + writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); + + /* Initialize the Transmit and Receive Pointer */ + writel((unsigned int)pDesc->rx_cmd_pt, AT91_BASE_SPI + AT91_SPI_RPR); + writel((unsigned int)pDesc->tx_cmd_pt, AT91_BASE_SPI + AT91_SPI_TPR); + + /* Intialize the Transmit and Receive Counters */ + writel(pDesc->rx_cmd_size, AT91_BASE_SPI + AT91_SPI_RCR); + writel(pDesc->tx_cmd_size, AT91_BASE_SPI + AT91_SPI_TCR); + + if (pDesc->tx_data_size != 0) { + /* Initialize the Next Transmit and Next Receive Pointer */ + writel((unsigned int)pDesc->rx_data_pt, AT91_BASE_SPI + AT91_SPI_RNPR); + writel((unsigned int)pDesc->tx_data_pt, AT91_BASE_SPI + AT91_SPI_TNPR); + + /* Intialize the Next Transmit and Next Receive Counters */ + writel(pDesc->rx_data_size, AT91_BASE_SPI + AT91_SPI_RNCR); + writel(pDesc->tx_data_size, AT91_BASE_SPI + AT91_SPI_TNCR); + } + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked(); + timeout = 0; + + writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR); + while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) && + ((timeout = get_timer_masked()) < CFG_SPI_WRITE_TOUT)); + writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); + pDesc->state = IDLE; + + if (timeout >= CFG_SPI_WRITE_TOUT) { + printf("Error Timeout\n\r"); + return DATAFLASH_ERROR; + } + + return DATAFLASH_OK; +} diff --git a/cpu/arm926ejs/at91cap9/timer.c b/cpu/arm926ejs/at91sam9/timer.c index 4110e15..4e79466 100644 --- a/cpu/arm926ejs/at91cap9/timer.c +++ b/cpu/arm926ejs/at91sam9/timer.c @@ -24,36 +24,35 @@ #include <common.h> #include <asm/arch/hardware.h> +#include <asm/arch/at91_pit.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/io.h> /* - * We're using the AT91CAP9 PITC in 32 bit mode, by + * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by * setting the 20 bit counter period to its maximum (0xfffff). */ #define TIMER_LOAD_VAL 0xfffff -#define READ_RESET_TIMER (AT91C_BASE_PITC->PITC_PIVR) -#define READ_TIMER (AT91C_BASE_PITC->PITC_PIIR) +#define READ_RESET_TIMER at91_sys_read(AT91_PIT_PIVR) +#define READ_TIMER at91_sys_read(AT91_PIT_PIIR) #define TIMER_FREQ (AT91C_MASTER_CLOCK << 4) #define TICKS_TO_USEC(ticks) ((ticks) / 6) ulong get_timer_masked(void); ulong resettime; -AT91PS_PITC p_pitc; - /* nothing really to do with interrupts, just starts up a counter. */ -int interrupt_init(void) +int timer_init(void) { /* * Enable PITC Clock * The clock is already enabled for system controller in boot */ - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SYS; + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); /* Enable PITC */ - AT91C_BASE_PITC->PITC_PIMR = AT91C_PITC_PITEN; - - /* Load PITC_PIMR with the right timer value */ - AT91C_BASE_PITC->PITC_PIMR |= TIMER_LOAD_VAL; + at91_sys_write(AT91_PIT_MR, TIMER_LOAD_VAL | AT91_PIT_PITEN); reset_timer_masked(); @@ -67,6 +66,7 @@ int interrupt_init(void) static inline ulong get_timer_raw(void) { ulong now = READ_TIMER; + if (now >= resettime) return now - resettime; else @@ -129,20 +129,20 @@ unsigned long long get_ticks(void) ulong get_tbclk(void) { ulong tbclk; + tbclk = CFG_HZ; return tbclk; } /* - * Reset the cpu by setting up the watchdog timer and let him time out - * on the AT91CAP9ADK board + * Reset the cpu by setting up the watchdog timer and let him time out. */ void reset_cpu(ulong ignored) { /* this is the way Linux does it */ - AT91C_BASE_RSTC->RSTC_RCR = (0xA5 << 24) | - AT91C_RSTC_PROCRST | - AT91C_RSTC_PERRST; + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | + AT91_RSTC_PROCRST | + AT91_RSTC_PERRST); while (1); /* Never reached */ diff --git a/cpu/arm926ejs/at91cap9/usb.c b/cpu/arm926ejs/at91sam9/usb.c index 69da5f3..d678897 100644 --- a/cpu/arm926ejs/at91cap9/usb.c +++ b/cpu/arm926ejs/at91sam9/usb.c @@ -24,15 +24,16 @@ #include <common.h> #if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) -#ifdef CONFIG_AT91CAP9 #include <asm/arch/hardware.h> +#include <asm/arch/io.h> +#include <asm/arch/at91_pmc.h> int usb_cpu_init(void) { /* Enable USB host clock. */ - AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_UHP; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_UHP; + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP); + at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP); return 0; } @@ -40,8 +41,8 @@ int usb_cpu_init(void) int usb_cpu_stop(void) { /* Disable USB host clock. */ - AT91C_BASE_PMC->PMC_PCDR = 1 << AT91C_ID_UHP; - AT91C_BASE_PMC->PMC_SCDR = AT91C_PMC_UHP; + at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP); + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP); return 0; } @@ -50,5 +51,4 @@ int usb_cpu_init_fail(void) return usb_cpu_stop(); } -#endif /* CONFIG_AT91CAP9 */ #endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */ diff --git a/cpu/arm926ejs/davinci/lowlevel_init.S b/cpu/arm926ejs/davinci/lowlevel_init.S index a87c112..79bc692 100644 --- a/cpu/arm926ejs/davinci/lowlevel_init.S +++ b/cpu/arm926ejs/davinci/lowlevel_init.S @@ -3,6 +3,11 @@ * * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> * + * Copyright (C) 2008 Prodrive BV <pv@prodrive.nl> + * Changed: + * Made board specific defines such as DDR timing and PLL + * dividers. These should be set in the board config file + * * Partially based on TI sources, original copyrights follow: */ @@ -156,17 +161,17 @@ WaitPPL2Loop: /* Program the PLL Multiplier */ ldr r6, PLL2_PLLM - mov r2, $0x17 /* 162 MHz */ + mov r2, $CFG_DAVINCI_PLL2_PLLM str r2, [r6] /* Program the PLL2 Divisor Value */ ldr r6, PLL2_DIV2 - mov r3, $0x01 + mov r3, $CFG_DAVINCI_PLL2_DIV2 str r3, [r6] /* Program the PLL2 Divisor Value */ ldr r6, PLL2_DIV1 - mov r4, $0x0b /* 54 MHz */ + mov r4, $CFG_DAVINCI_PLL2_DIV1 str r4, [r6] /* PLL2 DIV2 MMR */ @@ -273,7 +278,7 @@ checkDDRStatClkStop: bne checkDDRStatClkStop /*------------------------------------------------------* - * Program DDR2 MMRs for 162MHz Setting * + * Program DDR2 MMRs * *------------------------------------------------------*/ /* Program PHY Control Register */ @@ -288,12 +293,12 @@ checkDDRStatClkStop: /* Program SDRAM TIM-0 Config Register */ ldr r6, SDTIM0 - ldr r7, SDTIM0_VAL_162MHz + ldr r7, SDTIM0_VAL str r7, [r6] /* Program SDRAM TIM-1 Config Register */ ldr r6, SDTIM1 - ldr r7, SDTIM1_VAL_162MHz + ldr r7, SDTIM1_VAL str r7, [r6] /* Program the SDRAM Bank Config Control Register */ @@ -435,7 +440,7 @@ WaitLoop: /* Program the PLL Multiplier */ ldr r6, PLL1_PLLM - mov r3, $0x15 /* For 594MHz */ + mov r3, $CFG_DAVINCI_PLL1_PLLM str r3, [r6] /* Wait for PLL to Reset Properly */ @@ -467,7 +472,7 @@ PLL1Lock: nop /*------------------------------------------------------* - * AEMIF configuration for NOR Flash (double check) * + * AEMIF configuration for NAND/NOR Flash * *------------------------------------------------------*/ ldr r0, _PINMUX0 ldr r1, _DEV_SETTING @@ -479,6 +484,12 @@ PLL1Lock: orr r2, r2, r1 str r2, [r0] + ldr r0, ACFG2 + ldr r1, ACFG2_VAL + ldr r2, [r0] + and r1, r2, r1 + str r1, [r0] + ldr r0, ACFG3 ldr r1, ACFG3_VAL ldr r2, [r0] @@ -497,6 +508,12 @@ PLL1Lock: and r1, r2, r1 str r1, [r0] + ldr r0, NANDFCR + ldr r1, NANDFCR_VAL + ldr r2, [r0] + and r1, r2, r1 + str r1, [r0] + /*--------------------------------------* * VTP manual Calibration * *--------------------------------------*/ @@ -560,24 +577,36 @@ _PINMUX1: .word 0x01c40004 /* Device Configuration Registers */ _DEV_SETTING: - .word 0x00000c1f + .word CFG_DAVINCI_PINMUX_0 WAITCFG: .word 0x01e00004 WAITCFG_VAL: - .word 0 + .word CFG_DAVINCI_WAITCFG +ACFG2: + .word 0x01e00010 +ACFG2_VAL: + .word CFG_DAVINCI_ACFG2 ACFG3: .word 0x01e00014 ACFG3_VAL: - .word 0x3ffffffd + .word CFG_DAVINCI_ACFG3 ACFG4: .word 0x01e00018 ACFG4_VAL: - .word 0x3ffffffd + .word CFG_DAVINCI_ACFG4 ACFG5: .word 0x01e0001c ACFG5_VAL: - .word 0x3ffffffd + .word CFG_DAVINCI_ACFG5 +NANDFCR: + .word 0x01e00060 +NANDFCR_VAL: +#ifdef CFG_DAVINCI_NANDCE + .word (1 << (CFG_DAVINCI_NANDCE - 2)) +#else + .word 0x00000000 +#endif MDCTL_DDR2: .word 0x01c41a34 @@ -599,33 +628,27 @@ PSC_FLAG_CLEAR: PSC_GEM_FLAG_CLEAR: .word 0xfffffeff -/* DDR2 MMR & CONFIGURATION VALUES, 162 MHZ clock */ +/* DDR2 MMR & CONFIGURATION VALUES */ DDRCTL: .word 0x200000e4 DDRCTL_VAL: - .word 0x50006405 + .word CFG_DAVINCI_DDRCTL SDREF: .word 0x2000000c SDREF_VAL: - .word 0x000005c3 + .word CFG_DAVINCI_SDREF SDCFG: .word 0x20000008 SDCFG_VAL: -#ifdef DDR_4BANKS - .word 0x00178622 -#elif defined DDR_8BANKS - .word 0x00178632 -#else -#error "Unknown DDR configuration!!!" -#endif + .word CFG_DAVINCI_SDCFG SDTIM0: .word 0x20000010 -SDTIM0_VAL_162MHz: - .word 0x28923211 +SDTIM0_VAL: + .word CFG_DAVINCI_SDTIM0 SDTIM1: .word 0x20000014 -SDTIM1_VAL_162MHz: - .word 0x0016c722 +SDTIM1_VAL: + .word CFG_DAVINCI_SDTIM1 VTPIOCR: .word 0x200000f0 /* VTP IO Control register */ DDRVTPR: @@ -699,7 +722,7 @@ PLL2_DIV_MASK: MMARG_BRF0: .word 0x01c42010 /* BRF margin mode 0 (R/W)*/ MMARG_BRF0_VAL: - .word 0x00444400 + .word CFG_DAVINCI_MMARG_BRF0 DDR2_START_ADDR: .word 0x80000000 diff --git a/cpu/arm926ejs/davinci/nand.c b/cpu/arm926ejs/davinci/nand.c index 127be9f..3257f83 100644 --- a/cpu/arm926ejs/davinci/nand.c +++ b/cpu/arm926ejs/davinci/nand.c @@ -117,7 +117,7 @@ static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode) dummy = emif_addr->NANDF3ECC; dummy = emif_addr->NANDF4ECC; - emif_addr->NANDFCR |= (1 << 8); + emif_addr->NANDFCR |= (1 << (CFG_DAVINCI_NANDCE + 6)); } static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region) @@ -147,7 +147,7 @@ static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u n = (this->eccmode == NAND_ECC_HW12_2048) ? 4 : 1; - region = 1; + region = (CFG_DAVINCI_NANDCE - 1); while (n--) { tmp = nand_davinci_readecc(mtd, region); *ecc_code++ = tmp; @@ -311,40 +311,9 @@ static int nand_davinci_waitfunc(struct mtd_info *mtd, struct nand_chip *this, i static void nand_flash_init(void) { - u_int32_t acfg1 = 0x3ffffffc; - u_int32_t acfg2 = 0x3ffffffc; - u_int32_t acfg3 = 0x3ffffffc; - u_int32_t acfg4 = 0x3ffffffc; - emifregs emif_regs; - - /*------------------------------------------------------------------* - * NAND FLASH CHIP TIMEOUT @ 459 MHz * - * * - * AEMIF.CLK freq = PLL1/6 = 459/6 = 76.5 MHz * - * AEMIF.CLK period = 1/76.5 MHz = 13.1 ns * - * * - *------------------------------------------------------------------*/ - acfg1 = 0 - | (0 << 31 ) /* selectStrobe */ - | (0 << 30 ) /* extWait */ - | (1 << 26 ) /* writeSetup 10 ns */ - | (3 << 20 ) /* writeStrobe 40 ns */ - | (1 << 17 ) /* writeHold 10 ns */ - | (1 << 13 ) /* readSetup 10 ns */ - | (5 << 7 ) /* readStrobe 60 ns */ - | (1 << 4 ) /* readHold 10 ns */ - | (3 << 2 ) /* turnAround ?? ns */ - | (0 << 0 ) /* asyncSize 8-bit bus */ - ; - - emif_regs = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE; - - emif_regs->AWCCR |= 0x10000000; - emif_regs->AB1CR = acfg1; /* 0x08244128 */; - emif_regs->AB2CR = acfg2; - emif_regs->AB3CR = acfg3; - emif_regs->AB4CR = acfg4; - emif_regs->NANDFCR = 0x00000101; + /* All EMIF initialization is done in lowlevel_init.S + * and config values are in the board config files + */ } int board_nand_init(struct nand_chip *nand) diff --git a/cpu/arm926ejs/davinci/timer.c b/cpu/arm926ejs/davinci/timer.c index 8bb8b45..4797797 100644 --- a/cpu/arm926ejs/davinci/timer.c +++ b/cpu/arm926ejs/davinci/timer.c @@ -42,9 +42,9 @@ typedef volatile struct { u_int32_t pid12; - u_int32_t emumgt_clksped; - u_int32_t gpint_en; - u_int32_t gpdir_dat; + u_int32_t emumgt; + u_int32_t na1; + u_int32_t na2; u_int32_t tim12; u_int32_t tim34; u_int32_t prd12; @@ -52,21 +52,12 @@ typedef volatile struct { u_int32_t tcr; u_int32_t tgcr; u_int32_t wdtcr; - u_int32_t tlgc; - u_int32_t tlmr; } davinci_timer; davinci_timer *timer = (davinci_timer *)CFG_TIMERBASE; #define TIMER_LOAD_VAL (CFG_HZ_CLOCK / CFG_HZ) -#define READ_TIMER timer->tim34 - -/* - * Timer runs with CFG_HZ_CLOCK, currently 27MHz. To avoid wrap - * around of timestamp already after min ~159s, divide it, e.g. by 16. - * timestamp will then wrap around all min ~42min - */ -#define DIV(x) ((x) >> 4) +#define TIM_CLK_DIV 16 static ulong timestamp; static ulong lastinc; @@ -76,63 +67,50 @@ int timer_init(void) /* We are using timer34 in unchained 32-bit mode, full speed */ timer->tcr = 0x0; timer->tgcr = 0x0; - timer->tgcr = 0x06; + timer->tgcr = 0x06 | ((TIM_CLK_DIV - 1) << 8); timer->tim34 = 0x0; timer->prd34 = TIMER_LOAD_VAL; lastinc = 0; - timer->tcr = 0x80 << 16; timestamp = 0; + timer->tcr = 2 << 22; return(0); } void reset_timer(void) { - reset_timer_masked(); -} - -ulong get_timer(ulong base) -{ - return(get_timer_masked() - base); -} - -void set_timer(ulong t) -{ - timestamp = t; -} - -void udelay(unsigned long usec) -{ - udelay_masked(usec); -} - -void reset_timer_masked(void) -{ - lastinc = DIV(READ_TIMER); + timer->tcr = 0x0; + timer->tim34 = 0; + lastinc = 0; timestamp = 0; + timer->tcr = 2 << 22; } -ulong get_timer_raw(void) +static ulong get_timer_raw(void) { - ulong now = DIV(READ_TIMER); + ulong now = timer->tim34; if (now >= lastinc) { /* normal mode */ timestamp += now - lastinc; } else { /* overflow ... */ - timestamp += now + DIV(TIMER_LOAD_VAL) - lastinc; + timestamp += now + TIMER_LOAD_VAL - lastinc; } lastinc = now; return timestamp; } -ulong get_timer_masked(void) +ulong get_timer(ulong base) +{ + return((get_timer_raw() / (TIMER_LOAD_VAL / TIM_CLK_DIV)) - base); } + +void set_timer(ulong t) { - return(get_timer_raw() / DIV(TIMER_LOAD_VAL)); + timestamp = t; } -void udelay_masked(unsigned long usec) +void udelay(unsigned long usec) { ulong tmo; ulong endtime; @@ -140,7 +118,7 @@ void udelay_masked(unsigned long usec) tmo = CFG_HZ_CLOCK / 1000; tmo *= usec; - tmo /= 1000; + tmo /= (1000 * TIM_CLK_DIV); endtime = get_timer_raw() + tmo; @@ -165,8 +143,5 @@ unsigned long long get_ticks(void) */ ulong get_tbclk(void) { - ulong tbclk; - - tbclk = CFG_HZ; - return(tbclk); + return CFG_HZ; } diff --git a/cpu/arm926ejs/interrupts.c b/cpu/arm926ejs/interrupts.c index 0971fea..1819f6b 100644 --- a/cpu/arm926ejs/interrupts.c +++ b/cpu/arm926ejs/interrupts.c @@ -38,7 +38,7 @@ #include <common.h> #include <arm926ejs.h> -#if defined(CONFIG_INTEGRATOR) || defined(CONFIG_AT91CAP9ADK) +#ifdef CONFIG_INTEGRATOR /* Timer functionality supplied by Integrator board (AP or CP) */ diff --git a/cpu/bf533/bf533_serial.h b/cpu/bf533/bf533_serial.h deleted file mode 100644 index 9970b72..0000000 --- a/cpu/bf533/bf533_serial.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * U-boot - bf533_serial.h Serial Driver defines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. - * Copyright (C) 2003 Bas Vermeulen <bas@buyways.nl> - * BuyWays B.V. (www.buyways.nl) - * - * Based heavily on: - * blkfinserial.h: Definitions for the BlackFin DSP serial driver. - * - * Copyright (C) 2001 Tony Z. Kou tonyko@arcturusnetworks.com - * Copyright (C) 2001 Arcturus Networks Inc. <www.arcturusnetworks.com> - * - * Based on code from 68328serial.c which was: - * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _Bf533_SERIAL_H -#define _Bf533_SERIAL_H - -#include <linux/config.h> -#include <asm/blackfin.h> - -#define SYNC_ALL __asm__ __volatile__ ("ssync;\n") -#define ACCESS_LATCH *pUART_LCR |= DLAB; -#define ACCESS_PORT_IER *pUART_LCR &= (~DLAB); - -void serial_setbrg(void); -static void local_put_char(char ch); -void calc_baud(void); -void serial_setbrg(void); -int serial_init(void); -void serial_putc(const char c); -int serial_tstc(void); -int serial_getc(void); -void serial_puts(const char *s); -static void local_put_char(char ch); - -int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 }; - -struct { - unsigned char dl_high; - unsigned char dl_low; -} hw_baud_table[5]; - -#ifdef CONFIG_STAMP -extern unsigned long pll_div_fact; -#endif - -#endif diff --git a/cpu/bf533/cache.S b/cpu/bf533/cache.S deleted file mode 100644 index d9015c6..0000000 --- a/cpu/bf533/cache.S +++ /dev/null @@ -1,129 +0,0 @@ -#define ASSEMBLY -#include <asm/linkage.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mach-common/bits/mpu.h> - -.text -.align 2 -ENTRY(_blackfin_icache_flush_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; - 1: - IFLUSH[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - IFLUSH[P0]; - SSYNC; - RTS; - -ENTRY(_blackfin_dcache_flush_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; -1: - FLUSH[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - FLUSH[P0]; - SSYNC; - RTS; - -ENTRY(_icache_invalidate) -ENTRY(_invalidate_entire_icache) - [--SP] = (R7:5); - - P0.L = (IMEM_CONTROL & 0xFFFF); - P0.H = (IMEM_CONTROL >> 16); - R7 =[P0]; - - /* - * Clear the IMC bit , All valid bits in the instruction - * cache are set to the invalid state - */ - BITCLR(R7, IMC_P); - CLI R6; - /* SSYNC required before invalidating cache. */ - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - /* Configures the instruction cache agian */ - R6 = (IMC | ENICPLB); - R7 = R7 | R6; - - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - (R7:5) =[SP++]; - RTS; - -/* - * Invalidate the Entire Data cache by - * clearing DMC[1:0] bits - */ -ENTRY(_invalidate_entire_dcache) -ENTRY(_dcache_invalidate) - [--SP] = (R7:6); - - P0.L = (DMEM_CONTROL & 0xFFFF); - P0.H = (DMEM_CONTROL >> 16); - R7 =[P0]; - - /* - * Clear the DMC[1:0] bits, All valid bits in the data - * cache are set to the invalid state - */ - BITCLR(R7, DMC0_P); - BITCLR(R7, DMC1_P); - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - /* Configures the data cache again */ - - R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - R7 = R7 | R6; - - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - (R7:6) =[SP++]; - RTS; - -ENTRY(_blackfin_dcache_invalidate_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; -1: - FLUSHINV[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - - /* - * If the data crosses a cache line, then we'll be pointing to - * the last cache line, but won't have flushed/invalidated it yet, so do - * one more. - */ - FLUSHINV[P0]; - SSYNC; - RTS; diff --git a/cpu/bf533/cpu.c b/cpu/bf533/cpu.c deleted file mode 100644 index edb771e..0000000 --- a/cpu/bf533/cpu.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * U-boot - cpu.c CPU specific functions - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <asm/blackfin.h> -#include <command.h> -#include <asm/entry.h> -#include <asm/cplb.h> -#include <asm/io.h> - -#define CACHE_ON 1 -#define CACHE_OFF 0 - -extern unsigned int icplb_table[page_descriptor_table_size][2]; -extern unsigned int dcplb_table[page_descriptor_table_size][2]; - -int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) -{ - __asm__ __volatile__("cli r3;" "P0 = %0;" "JUMP (P0);"::"r"(L1_INST_SRAM) - ); - - return 0; -} - -/* These functions are just used to satisfy the linker */ -int cpu_init(void) -{ - return 0; -} - -int cleanup_before_linux(void) -{ - return 0; -} - -void icache_enable(void) -{ - unsigned int *I0, *I1; - int i, j = 0; - - /* Before enable icache, disable it first */ - icache_disable(); - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - - /* make sure the locked ones go in first */ - for (i = 0; i < page_descriptor_table_size; i++) { - if (CPLB_LOCK & icplb_table[i][1]) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - icplb_table[i][0], icplb_table[i][1]); - *I0++ = icplb_table[i][0]; - *I1++ = icplb_table[i][1]; - j++; - } - } - - for (i = 0; i < page_descriptor_table_size; i++) { - if (!(CPLB_LOCK & icplb_table[i][1])) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - icplb_table[i][0], icplb_table[i][1]); - *I0++ = icplb_table[i][0]; - *I1++ = icplb_table[i][1]; - j++; - if (j == 16) { - break; - } - } - } - - /* Fill the rest with invalid entry */ - if (j <= 15) { - for (; j < 16; j++) { - debug("filling %i with 0", j); - *I1++ = 0x0; - } - - } - - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; - SSYNC(); -} - -void icache_disable(void) -{ - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); - SSYNC(); -} - -int icache_status(void) -{ - unsigned int value; - value = *(unsigned int *)IMEM_CONTROL; - - if (value & (IMC | ENICPLB)) - return CACHE_ON; - else - return CACHE_OFF; -} - -void dcache_enable(void) -{ - unsigned int *I0, *I1; - unsigned int temp; - int i, j = 0; - - /* Before enable dcache, disable it first */ - dcache_disable(); - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - - /* make sure the locked ones go in first */ - for (i = 0; i < page_descriptor_table_size; i++) { - if (CPLB_LOCK & dcplb_table[i][1]) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - *I0++ = dcplb_table[i][0]; - *I1++ = dcplb_table[i][1]; - j++; - } else { - debug("skip %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - } - } - - for (i = 0; i < page_descriptor_table_size; i++) { - if (!(CPLB_LOCK & dcplb_table[i][1])) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - *I0++ = dcplb_table[i][0]; - *I1++ = dcplb_table[i][1]; - j++; - if (j == 16) { - break; - } - } - } - - /* Fill the rest with invalid entry */ - if (j <= 15) { - for (; j < 16; j++) { - debug("filling %i with 0", j); - *I1++ = 0x0; - } - } - - temp = *(unsigned int *)DMEM_CONTROL; - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL = - ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | temp; - SSYNC(); -} - -void dcache_disable(void) -{ - unsigned int *I0, *I1; - int i; - - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL &= - ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - SSYNC(); - - /* after disable dcache, - * clear it so we don't confuse the next application - */ - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - - for (i = 0; i < 16; i++) { - *I0++ = 0x0; - *I1++ = 0x0; - } -} - -int dcache_status(void) -{ - unsigned int value; - value = *(unsigned int *)DMEM_CONTROL; - if (value & (ENDCPLB)) - return CACHE_ON; - else - return CACHE_OFF; -} diff --git a/cpu/bf533/cpu.h b/cpu/bf533/cpu.h deleted file mode 100644 index b6b73b1..0000000 --- a/cpu/bf533/cpu.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * U-boot - cpu.h - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _CPU_H_ -#define _CPU_H_ - -#include <command.h> - -#define INTERNAL_IRQS (32) -#define NUM_IRQ_NODES 16 -#define DEF_INTERRUPT_FLAGS 1 -#define MAX_TIM_LOAD 0xFFFFFFFF - -void blackfin_irq_panic(int reason, struct pt_regs *reg); -extern void dump(struct pt_regs *regs); -void display_excp(void); -asmlinkage void evt_nmi(void); -asmlinkage void evt_exception(void); -asmlinkage void trap(void); -asmlinkage void evt_ivhw(void); -asmlinkage void evt_rst(void); -asmlinkage void evt_timer(void); -asmlinkage void evt_evt7(void); -asmlinkage void evt_evt8(void); -asmlinkage void evt_evt9(void); -asmlinkage void evt_evt10(void); -asmlinkage void evt_evt11(void); -asmlinkage void evt_evt12(void); -asmlinkage void evt_evt13(void); -asmlinkage void evt_soft_int1(void); -asmlinkage void evt_system_call(void); -void blackfin_irq_panic(int reason, struct pt_regs *regs); -void blackfin_free_irq(unsigned int irq, void *dev_id); -void call_isr(int irq, struct pt_regs *fp); -void blackfin_do_irq(int vec, struct pt_regs *fp); -void blackfin_init_IRQ(void); -void blackfin_enable_irq(unsigned int irq); -void blackfin_disable_irq(unsigned int irq); -extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); -int blackfin_request_irq(unsigned int irq, - void (*handler) (int, void *, struct pt_regs *), - unsigned long flags, const char *devname, - void *dev_id); -void timer_init(void); -#endif diff --git a/cpu/bf533/flush.S b/cpu/bf533/flush.S deleted file mode 100644 index 62e3d65..0000000 --- a/cpu/bf533/flush.S +++ /dev/null @@ -1,405 +0,0 @@ -/* Copyright (C) 2003-2007 Analog Devices Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. - */ - -#define ASSEMBLY - -#include <asm/linkage.h> -#include <asm/cplb.h> -#include <config.h> -#include <asm/blackfin.h> - -.text - -/* This is an external function being called by the user - * application through __flush_cache_all. Currently this function - * serves the purpose of flushing all the pending writes in - * in the instruction cache. - */ - -ENTRY(_flush_instruction_cache) - [--SP] = ( R7:6, P5:4 ); - LINK 12; - SP += -12; - P5.H = (ICPLB_ADDR0 >> 16); - P5.L = (ICPLB_ADDR0 & 0xFFFF); - P4.H = (ICPLB_DATA0 >> 16); - P4.L = (ICPLB_DATA0 & 0xFFFF); - R7 = CPLB_VALID | CPLB_L1_CHBL; - R6 = 16; -inext: R0 = [P5++]; - R1 = [P4++]; - [--SP] = RETS; - CALL _icplb_flush; /* R0 = page, R1 = data*/ - RETS = [SP++]; -iskip: R6 += -1; - CC = R6; - IF CC JUMP inext; - SSYNC; - SP += 12; - UNLINK; - ( R7:6, P5:4 ) = [SP++]; - RTS; - -/* This is an internal function to flush all pending - * writes in the cache associated with a particular ICPLB. - * - * R0 - page's start address - * R1 - CPLB's data field. - */ - -.align 2 -ENTRY(_icplb_flush) - [--SP] = ( R7:0, P5:0 ); - [--SP] = LC0; - [--SP] = LT0; - [--SP] = LB0; - [--SP] = LC1; - [--SP] = LT1; - [--SP] = LB1; - - /* If it's a 1K or 4K page, then it's quickest to - * just systematically flush all the addresses in - * the page, regardless of whether they're in the - * cache, or dirty. If it's a 1M or 4M page, there - * are too many addresses, and we have to search the - * cache for lines corresponding to the page. - */ - - CC = BITTST(R1, 17); /* 1MB or 4MB */ - IF !CC JUMP iflush_whole_page; - - /* We're only interested in the page's size, so extract - * this from the CPLB (bits 17:16), and scale to give an - * offset into the page_size and page_prefix tables. - */ - - R1 <<= 14; - R1 >>= 30; - R1 <<= 2; - - /* We can also determine the sub-bank used, because this is - * taken from bits 13:12 of the address. - */ - - R3 = ((12<<8)|2); /* Extraction pattern */ - nop; /* Anamoly 05000209 */ - R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits */ - - /* Save in extraction pattern for later deposit. */ - R3.H = R4.L << 0; - - /* So: - * R0 = Page start - * R1 = Page length (actually, offset into size/prefix tables) - * R3 = sub-bank deposit values - * - * The cache has 2 Ways, and 64 sets, so we iterate through - * the sets, accessing the tag for each Way, for our Bank and - * sub-bank, looking for dirty, valid tags that match our - * address prefix. - */ - - P5.L = (ITEST_COMMAND & 0xFFFF); - P5.H = (ITEST_COMMAND >> 16); - P4.L = (ITEST_DATA0 & 0xFFFF); - P4.H = (ITEST_DATA0 >> 16); - - P0.L = page_prefix_table; - P0.H = page_prefix_table; - P1 = R1; - R5 = 0; /* Set counter*/ - P0 = P1 + P0; - R4 = [P0]; /* This is the address prefix*/ - - /* We're reading (bit 1==0) the tag (bit 2==0), and we - * don't care about which double-word, since we're only - * fetching tags, so we only have to set Set, Bank, - * Sub-bank and Way. - */ - - P2 = 4; - LSETUP (ifs1, ife1) LC1 = P2; -ifs1: P0 = 32; /* iterate over all sets*/ - LSETUP (ifs0, ife0) LC0 = P0; -ifs0: R6 = R5 << 5; /* Combine set*/ - R6.H = R3.H << 0 ; /* and sub-bank*/ - [P5] = R6; /* Issue Command*/ - SSYNC; /* CSYNC will not work here :(*/ - R7 = [P4]; /* and read Tag.*/ - CC = BITTST(R7, 0); /* Check if valid*/ - IF !CC JUMP ifskip; /* and skip if not.*/ - - /* Compare against the page address. First, plant bits 13:12 - * into the tag, since those aren't part of the returned data. - */ - - R7 = DEPOSIT(R7, R3); /* set 13:12*/ - R1 = R7 & R4; /* Mask off lower bits*/ - CC = R1 == R0; /* Compare against page start.*/ - IF !CC JUMP ifskip; /* Skip it if it doesn't match.*/ - - /* Tag address matches against page, so this is an entry - * we must flush. - */ - - R7 >>= 10; /* Mask off the non-address bits*/ - R7 <<= 10; - P3 = R7; - IFLUSH [P3]; /* And flush the entry*/ -ifskip: -ife0: R5 += 1; /* Advance to next Set*/ -ife1: NOP; - -ifinished: - SSYNC; /* Ensure the data gets out to mem.*/ - - /*Finished. Restore context.*/ - LB1 = [SP++]; - LT1 = [SP++]; - LC1 = [SP++]; - LB0 = [SP++]; - LT0 = [SP++]; - LC0 = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; - -iflush_whole_page: - /* It's a 1K or 4K page, so quicker to just flush the - * entire page. - */ - - P1 = 32; /* For 1K pages*/ - P2 = P1 << 2; /* For 4K pages*/ - P0 = R0; /* Start of page*/ - CC = BITTST(R1, 16); /* Whether 1K or 4K*/ - IF CC P1 = P2; - P1 += -1; /* Unroll one iteration*/ - SSYNC; - IFLUSH [P0++]; /* because CSYNC can't end loops.*/ - LSETUP (isall, ieall) LC0 = P1; -isall: - IFLUSH [P0++]; -ieall: - NOP; - SSYNC; - JUMP ifinished; - -/* This is an external function being called by the user - * application through __flush_cache_all. Currently this function - * serves the purpose of flushing all the pending writes in - * in the data cache. - */ - -ENTRY(_flush_data_cache) - [--SP] = ( R7:6, P5:4 ); - LINK 12; - SP += -12; - P5.H = (DCPLB_ADDR0 >> 16); - P5.L = (DCPLB_ADDR0 & 0xFFFF); - P4.H = (DCPLB_DATA0 >> 16); - P4.L = (DCPLB_DATA0 & 0xFFFF); - R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z); - R6 = 16; -next: R0 = [P5++]; - R1 = [P4++]; - CC = BITTST(R1, 14); /* Is it write-through?*/ - IF CC JUMP skip; /* If so, ignore it.*/ - R2 = R1 & R7; /* Is it a dirty, cached page?*/ - CC = R2; - IF !CC JUMP skip; /* If not, ignore it.*/ - [--SP] = RETS; - CALL _dcplb_flush; /* R0 = page, R1 = data*/ - RETS = [SP++]; -skip: R6 += -1; - CC = R6; - IF CC JUMP next; - SSYNC; - SP += 12; - UNLINK; - ( R7:6, P5:4 ) = [SP++]; - RTS; - -/* This is an internal function to flush all pending - * writes in the cache associated with a particular DCPLB. - * - * R0 - page's start address - * R1 - CPLB's data field. - */ - -.align 2 -ENTRY(_dcplb_flush) - [--SP] = ( R7:0, P5:0 ); - [--SP] = LC0; - [--SP] = LT0; - [--SP] = LB0; - [--SP] = LC1; - [--SP] = LT1; - [--SP] = LB1; - - /* If it's a 1K or 4K page, then it's quickest to - * just systematically flush all the addresses in - * the page, regardless of whether they're in the - * cache, or dirty. If it's a 1M or 4M page, there - * are too many addresses, and we have to search the - * cache for lines corresponding to the page. - */ - - CC = BITTST(R1, 17); /* 1MB or 4MB */ - IF !CC JUMP dflush_whole_page; - - /* We're only interested in the page's size, so extract - * this from the CPLB (bits 17:16), and scale to give an - * offset into the page_size and page_prefix tables. - */ - - R1 <<= 14; - R1 >>= 30; - R1 <<= 2; - - /* The page could be mapped into Bank A or Bank B, depending - * on (a) whether both banks are configured as cache, and - * (b) on whether address bit A[x] is set. x is determined - * by DCBS in DMEM_CONTROL - */ - - R2 = 0; /* Default to Bank A (Bank B would be 1)*/ - - P0.L = (DMEM_CONTROL & 0xFFFF); - P0.H = (DMEM_CONTROL >> 16); - - R3 = [P0]; /* If Bank B is not enabled as cache*/ - CC = BITTST(R3, 2); /* then Bank A is our only option.*/ - IF CC JUMP bank_chosen; - - R4 = 1<<14; /* If DCBS==0, use A[14].*/ - R5 = R4 << 7; /* If DCBS==1, use A[23];*/ - CC = BITTST(R3, 4); - IF CC R4 = R5; /* R4 now has either bit 14 or bit 23 set.*/ - R5 = R0 & R4; /* Use it to test the Page address*/ - CC = R5; /* and if that bit is set, we use Bank B,*/ - R2 = CC; /* else we use Bank A.*/ - R2 <<= 23; /* The Bank selection's at posn 23.*/ - -bank_chosen: - - /* We can also determine the sub-bank used, because this is - * taken from bits 13:12 of the address. - */ - - R3 = ((12<<8)|2); /* Extraction pattern */ - nop; /*Anamoly 05000209*/ - R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ - /* Save in extraction pattern for later deposit.*/ - R3.H = R4.L << 0; - - /* So: - * R0 = Page start - * R1 = Page length (actually, offset into size/prefix tables) - * R2 = Bank select mask - * R3 = sub-bank deposit values - * - * The cache has 2 Ways, and 64 sets, so we iterate through - * the sets, accessing the tag for each Way, for our Bank and - * sub-bank, looking for dirty, valid tags that match our - * address prefix. - */ - - P5.L = (DTEST_COMMAND & 0xFFFF); - P5.H = (DTEST_COMMAND >> 16); - P4.L = (DTEST_DATA0 & 0xFFFF); - P4.H = (DTEST_DATA0 >> 16); - - P0.L = page_prefix_table; - P0.H = page_prefix_table; - P1 = R1; - R5 = 0; /* Set counter*/ - P0 = P1 + P0; - R4 = [P0]; /* This is the address prefix*/ - - - /* We're reading (bit 1==0) the tag (bit 2==0), and we - * don't care about which double-word, since we're only - * fetching tags, so we only have to set Set, Bank, - * Sub-bank and Way. - */ - - P2 = 2; - LSETUP (fs1, fe1) LC1 = P2; -fs1: P0 = 64; /* iterate over all sets*/ - LSETUP (fs0, fe0) LC0 = P0; -fs0: R6 = R5 << 5; /* Combine set*/ - R6.H = R3.H << 0 ; /* and sub-bank*/ - R6 = R6 | R2; /* and Bank. Leave Way==0 at first.*/ - BITSET(R6,14); - [P5] = R6; /* Issue Command*/ - SSYNC; - R7 = [P4]; /* and read Tag.*/ - CC = BITTST(R7, 0); /* Check if valid*/ - IF !CC JUMP fskip; /* and skip if not.*/ - CC = BITTST(R7, 1); /* Check if dirty*/ - IF !CC JUMP fskip; /* and skip if not.*/ - - /* Compare against the page address. First, plant bits 13:12 - * into the tag, since those aren't part of the returned data. - */ - - R7 = DEPOSIT(R7, R3); /* set 13:12*/ - R1 = R7 & R4; /* Mask off lower bits*/ - CC = R1 == R0; /* Compare against page start.*/ - IF !CC JUMP fskip; /* Skip it if it doesn't match.*/ - - /* Tag address matches against page, so this is an entry - * we must flush. - */ - - R7 >>= 10; /* Mask off the non-address bits*/ - R7 <<= 10; - P3 = R7; - SSYNC; - FLUSHINV [P3]; /* And flush the entry*/ -fskip: -fe0: R5 += 1; /* Advance to next Set*/ -fe1: BITSET(R2, 26); /* Go to next Way.*/ - -dfinished: - SSYNC; /* Ensure the data gets out to mem.*/ - - /*Finished. Restore context.*/ - LB1 = [SP++]; - LT1 = [SP++]; - LC1 = [SP++]; - LB0 = [SP++]; - LT0 = [SP++]; - LC0 = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; - -dflush_whole_page: - - /* It's a 1K or 4K page, so quicker to just flush the - * entire page. - */ - - P1 = 32; /* For 1K pages*/ - P2 = P1 << 2; /* For 4K pages*/ - P0 = R0; /* Start of page*/ - CC = BITTST(R1, 16); /* Whether 1K or 4K*/ - IF CC P1 = P2; - P1 += -1; /* Unroll one iteration*/ - SSYNC; - FLUSHINV [P0++]; /* because CSYNC can't end loops.*/ - LSETUP (eall, eall) LC0 = P1; -eall: FLUSHINV [P0++]; - SSYNC; - JUMP dfinished; - -.align 4; -page_prefix_table: -.byte4 0xFFFFFC00; /* 1K */ -.byte4 0xFFFFF000; /* 4K */ -.byte4 0xFFF00000; /* 1M */ -.byte4 0xFFC00000; /* 4M */ -.page_prefix_table.end: diff --git a/cpu/bf533/init_sdram.S b/cpu/bf533/init_sdram.S deleted file mode 100644 index 67a99e4..0000000 --- a/cpu/bf533/init_sdram.S +++ /dev/null @@ -1,183 +0,0 @@ -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mem_init.h> -#include <asm/mach-common/bits/bootrom.h> -#include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/pll.h> -#include <asm/mach-common/bits/uart.h> -.global init_sdram; - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -init_sdram: - [--SP] = ASTAT; - [--SP] = RETS; - [--SP] = (R7:0); - [--SP] = (P5:0); - -#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) - p0.h = hi(SPI_BAUD); - p0.l = lo(SPI_BAUD); - r0.l = CONFIG_SPI_BAUD; - w[p0] = r0.l; - SSYNC; -#endif - - /* - * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable - */ - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - /* - * Put SDRAM in self-refresh, incase anything is running - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - /* - * Set PLL_CTL with the value that we calculate in R0 - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -check_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump check_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; - - /* - * We now are running at speed, time to set the Async mem bank wait states - * This will speed up execution, since we are normally running from FLASH. - */ - - p2.h = (EBIU_AMBCTL1 >> 16); - p2.l = (EBIU_AMBCTL1 & 0xFFFF); - r0.h = (AMBCTL1VAL >> 16); - r0.l = (AMBCTL1VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMBCTL0 >> 16); - p2.l = (EBIU_AMBCTL0 & 0xFFFF); - r0.h = (AMBCTL0VAL >> 16); - r0.l = (AMBCTL0VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMGCTL >> 16); - p2.l = (EBIU_AMGCTL & 0xffff); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* - * Now, Initialize the SDRAM, - * start with the SDRAM Refresh Rate Control Register - */ - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Memory Bank Control Register - bank specific parameters - */ - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Global Control Register - global programmable parameters - * Disable self-refresh - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - - /* - * Check if SDRAM is already powered up, if it is, enable self-refresh - */ - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump skip; - NOP; - BITSET (R0, 23); -skip: - [P2] = R0; - SSYNC; - - /* Write in the new value in the register */ - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - [P2] = R0; - SSYNC; - nop; - - (P5:0) = [SP++]; - (R7:0) = [SP++]; - RETS = [SP++]; - ASTAT = [SP++]; - RTS; diff --git a/cpu/bf533/init_sdram_bootrom_initblock.S b/cpu/bf533/init_sdram_bootrom_initblock.S deleted file mode 100644 index 8694ca2..0000000 --- a/cpu/bf533/init_sdram_bootrom_initblock.S +++ /dev/null @@ -1,183 +0,0 @@ -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mem_init.h> -#include <asm/mach-common/bits/bootrom.h> -#include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/pll.h> -#include <asm/mach-common/bits/uart.h> -.global init_sdram; - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -init_sdram: - [--SP] = ASTAT; - [--SP] = RETS; - [--SP] = (R7:0); - [--SP] = (P5:0); - -#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) - p0.h = hi(SPI_BAUD); - p0.l = lo(SPI_BAUD); - r0.l = CONFIG_SPI_BAUD_INITBLOCK; - w[p0] = r0.l; - SSYNC; -#endif - - /* - * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable - */ - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - /* - * Put SDRAM in self-refresh, incase anything is running - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - /* - * Set PLL_CTL with the value that we calculate in R0 - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -check_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump check_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; - - /* - * We now are running at speed, time to set the Async mem bank wait states - * This will speed up execution, since we are normally running from FLASH. - */ - - p2.h = (EBIU_AMBCTL1 >> 16); - p2.l = (EBIU_AMBCTL1 & 0xFFFF); - r0.h = (AMBCTL1VAL >> 16); - r0.l = (AMBCTL1VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMBCTL0 >> 16); - p2.l = (EBIU_AMBCTL0 & 0xFFFF); - r0.h = (AMBCTL0VAL >> 16); - r0.l = (AMBCTL0VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMGCTL >> 16); - p2.l = (EBIU_AMGCTL & 0xffff); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* - * Now, Initialize the SDRAM, - * start with the SDRAM Refresh Rate Control Register - */ - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Memory Bank Control Register - bank specific parameters - */ - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Global Control Register - global programmable parameters - * Disable self-refresh - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - - /* - * Check if SDRAM is already powered up, if it is, enable self-refresh - */ - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump skip; - NOP; - BITSET (R0, 23); -skip: - [P2] = R0; - SSYNC; - - /* Write in the new value in the register */ - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - [P2] = R0; - SSYNC; - nop; - - (P5:0) = [SP++]; - (R7:0) = [SP++]; - RETS = [SP++]; - ASTAT = [SP++]; - RTS; diff --git a/cpu/bf533/interrupt.S b/cpu/bf533/interrupt.S deleted file mode 100644 index 7556ec9..0000000 --- a/cpu/bf533/interrupt.S +++ /dev/null @@ -1,244 +0,0 @@ -/* - * U-boot - interrupt.S Processing of interrupts and exception handling - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on interrupt.S - * - * Copyright (C) 2003 Metrowerks, Inc. <mwaddel@metrowerks.com> - * Copyright (C) 2002 Arcturus Networks Ltd. Ted Ma <mated@sympatico.ca> - * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * - * (c) 1995, Dionne & Associates - * (c) 1995, DKG Display Tech. - * - * This file is also based on exception.asm - * (C) Copyright 2001-2005 - Analog Devices, Inc. All rights reserved. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define ASSEMBLY -#include <config.h> -#include <asm/blackfin.h> -#include <asm/entry.h> - -.global _blackfin_irq_panic; - -.text -.align 2 - -#ifndef CONFIG_KGDB -.global _evt_emulation -_evt_emulation: - SAVE_CONTEXT - r0 = 0; - r1 = seqstat; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - rte; -#endif - -.global _evt_nmi -_evt_nmi: - SAVE_CONTEXT - r0 = 2; - r1 = RETN; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - -_evt_nmi_exit: - rtn; - -.global _trap -_trap: - SAVE_ALL_SYS - r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ - sp += -12; - call _trap_c - sp += 12; - RESTORE_ALL_SYS - rtx; - -.global _evt_rst -_evt_rst: - SAVE_CONTEXT - r0 = 1; - r1 = RETN; - sp += -12; - call _do_reset; - sp += 12; - -_evt_rst_exit: - rtn; - -irq_panic: - r0 = 3; - r1 = sp; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - -.global _evt_ivhw -_evt_ivhw: - SAVE_CONTEXT - RAISE 14; - -_evt_ivhw_exit: - rti; - -.global _evt_timer -_evt_timer: - SAVE_CONTEXT - r0 = 6; - sp += -12; - /* Polling method used now. */ - /* call timer_int; */ - sp += 12; - RESTORE_CONTEXT - rti; - nop; - -.global _evt_evt7 -_evt_evt7: - SAVE_CONTEXT - r0 = 7; - sp += -12; - call _process_int; - sp += 12; - -evt_evt7_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt8 -_evt_evt8: - SAVE_CONTEXT - r0 = 8; - sp += -12; - call _process_int; - sp += 12; - -evt_evt8_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt9 -_evt_evt9: - SAVE_CONTEXT - r0 = 9; - sp += -12; - call _process_int; - sp += 12; - -evt_evt9_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt10 -_evt_evt10: - SAVE_CONTEXT - r0 = 10; - sp += -12; - call _process_int; - sp += 12; - -evt_evt10_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt11 -_evt_evt11: - SAVE_CONTEXT - r0 = 11; - sp += -12; - call _process_int; - sp += 12; - -evt_evt11_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt12 -_evt_evt12: - SAVE_CONTEXT - r0 = 12; - sp += -12; - call _process_int; - sp += 12; -evt_evt12_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt13 -_evt_evt13: - SAVE_CONTEXT - r0 = 13; - sp += -12; - call _process_int; - sp += 12; - -evt_evt13_exit: - RESTORE_CONTEXT - rti; - -.global _evt_system_call -_evt_system_call: - [--sp] = r0; - [--SP] = RETI; - r0 = [sp++]; - r0 += 2; - [--sp] = r0; - RETI = [SP++]; - r0 = [SP++]; - SAVE_CONTEXT - sp += -12; - call _exception_handle; - sp += 12; - RESTORE_CONTEXT - RTI; - -evt_system_call_exit: - rti; - -.global _evt_soft_int1 -_evt_soft_int1: - [--sp] = r0; - [--SP] = RETI; - r0 = [sp++]; - r0 += 2; - [--sp] = r0; - RETI = [SP++]; - r0 = [SP++]; - SAVE_CONTEXT - sp += -12; - call _exception_handle; - sp += 12; - RESTORE_CONTEXT - RTI; - -evt_soft_int1_exit: - rti; diff --git a/cpu/bf533/interrupts.c b/cpu/bf533/interrupts.c deleted file mode 100644 index 3d1c3bc..0000000 --- a/cpu/bf533/interrupts.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * U-boot - interrupts.c Interrupt related routines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on interrupts.c - * Copyright 1996 Roman Zippel - * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> - * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> - * Copyright 2003 Metrowerks/Motorola - * Copyright 2003 Bas Vermeulen <bas@buyways.nl>, - * BuyWays B.V. (www.buyways.nl) - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <config.h> -#include <asm/blackfin.h> -#include "cpu.h" - -static ulong timestamp; -static ulong last_time; -static int int_flag; - -int irq_flags; /* needed by asm-blackfin/system.h */ - -/* Functions just to satisfy the linker */ - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On BF533 it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On BF533 it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - ulong tbclk; - - tbclk = CFG_HZ; - return tbclk; -} - -void enable_interrupts(void) -{ -} - -int disable_interrupts(void) -{ - return 1; -} - -int interrupt_init(void) -{ - return (0); -} - -void udelay(unsigned long usec) -{ - unsigned long delay, start, stop; - unsigned long cclk; - cclk = (CONFIG_CCLK_HZ); - - while (usec > 1) { - /* - * how many clock ticks to delay? - * - request(in useconds) * clock_ticks(Hz) / useconds/second - */ - if (usec < 1000) { - delay = (usec * (cclk / 244)) >> 12; - usec = 0; - } else { - delay = (1000 * (cclk / 244)) >> 12; - usec -= 1000; - } - - asm volatile (" %0 = CYCLES;":"=r" (start)); - do { - asm volatile (" %0 = CYCLES; ":"=r" (stop)); - } while (stop - start < delay); - } - - return; -} - -void timer_init(void) -{ - *pTCNTL = 0x1; - *pTSCALE = 0x0; - *pTCOUNT = MAX_TIM_LOAD; - *pTPERIOD = MAX_TIM_LOAD; - *pTCNTL = 0x7; - asm("CSYNC;"); - - timestamp = 0; - last_time = 0; -} - -/* Any network command or flash - * command is started get_timer shall - * be called before TCOUNT gets reset, - * to implement the accurate timeouts. - * - * How ever milliconds doesn't return - * the number that has been elapsed from - * the last reset. - * - * As get_timer is used in the u-boot - * only for timeouts this should be - * sufficient - */ -ulong get_timer(ulong base) -{ - ulong milisec; - - /* Number of clocks elapsed */ - ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT)); - - /** - * Find if the TCOUNT is reset - * timestamp gives the number of times - * TCOUNT got reset - */ - if (clocks < last_time) - timestamp++; - last_time = clocks; - - /* Get the number of milliseconds */ - milisec = clocks / (CONFIG_CCLK_HZ / 1000); - - /** - * Find the number of millisonds - * that got elapsed before this TCOUNT cycle - */ - milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000)); - - return (milisec - base); -} diff --git a/cpu/bf533/ints.c b/cpu/bf533/ints.c deleted file mode 100644 index 05d9a1b..0000000 --- a/cpu/bf533/ints.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * U-boot - ints.c Interrupt related routines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on ints.c - * - * Apr18 2003, Changed by HuTao to support interrupt cascading for Blackfin - * drivers - * - * Copyright 1996 Roman Zippel - * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> - * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> - * Copyright 2003 Metrowerks/Motorola - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <linux/stddef.h> -#include <asm/system.h> -#include <asm/traps.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <asm/blackfin.h> -#include "cpu.h" - -void blackfin_irq_panic(int reason, struct pt_regs *regs) -{ - printf("\n\nException: IRQ 0x%x entered\n", reason); - printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); - printf("stack frame=0x%x, ", (unsigned int)regs); - printf("bad PC=0x%04x\n", (unsigned int)regs->pc); - dump(regs); - printf("Unhandled IRQ or exceptions!\n"); - printf("Please reset the board \n"); -} - -void blackfin_init_IRQ(void) -{ - *(unsigned volatile long *)(SIC_IMASK) = 0; -#ifndef CONFIG_KGDB - *(unsigned volatile long *)(EVT1) = 0x0; -#endif - *(unsigned volatile long *)(EVT2) = - (unsigned volatile long)evt_nmi; - *(unsigned volatile long *)(EVT3) = - (unsigned volatile long)trap; - *(unsigned volatile long *)(EVT5) = - (unsigned volatile long)evt_ivhw; - *(unsigned volatile long *)(EVT0) = - (unsigned volatile long)evt_rst; - *(unsigned volatile long *)(EVT6) = - (unsigned volatile long)evt_timer; - *(unsigned volatile long *)(EVT7) = - (unsigned volatile long)evt_evt7; - *(unsigned volatile long *)(EVT8) = - (unsigned volatile long)evt_evt8; - *(unsigned volatile long *)(EVT9) = - (unsigned volatile long)evt_evt9; - *(unsigned volatile long *)(EVT10) = - (unsigned volatile long)evt_evt10; - *(unsigned volatile long *)(EVT11) = - (unsigned volatile long)evt_evt11; - *(unsigned volatile long *)(EVT12) = - (unsigned volatile long)evt_evt12; - *(unsigned volatile long *)(EVT13) = - (unsigned volatile long)evt_evt13; - *(unsigned volatile long *)(EVT14) = - (unsigned volatile long)evt_system_call; - *(unsigned volatile long *)(EVT15) = - (unsigned volatile long)evt_soft_int1; - *(volatile unsigned long *)ILAT = 0; - asm("csync;"); - *(volatile unsigned long *)IMASK = 0xffbf; - asm("csync;"); -} - -void exception_handle(void) -{ -#if defined (CONFIG_PANIC_HANG) - display_excp(); -#else - udelay(100000); /* allow messages to go out */ - do_reset(NULL, 0, 0, NULL); -#endif -} - -void display_excp(void) -{ - printf("Exception!\n"); -} diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c deleted file mode 100644 index 05fcfcc..0000000 --- a/cpu/bf533/serial.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * U-boot - serial.c Serial driver for BF533 - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART. - * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>, - * BuyWays B.V. (www.buyways.nl) - * - * Based heavily on blkfinserial.c - * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs. - * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com> - * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com> - * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com> - * - * Based on code from 68328 version serial driver imlpementation which was: - * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <asm/system.h> -#include <asm/bitops.h> -#include <asm/delay.h> -#include <asm/io.h> -#include "bf533_serial.h" -#include <asm/mach-common/bits/uart.h> - -DECLARE_GLOBAL_DATA_PTR; - -unsigned long pll_div_fact; - -void calc_baud(void) -{ - unsigned char i; - int temp; - u_long sclk = get_sclk(); - - for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { - temp = sclk / (baud_table[i] * 8); - if ((temp & 0x1) == 1) { - temp++; - } - temp = temp / 2; - hw_baud_table[i].dl_high = (temp >> 8) & 0xFF; - hw_baud_table[i].dl_low = (temp) & 0xFF; - } -} - -void serial_setbrg(void) -{ - int i; - - calc_baud(); - - for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { - if (gd->baudrate == baud_table[i]) - break; - } - - /* Enable UART */ - *pUART_GCTL |= UCEN; - SSYNC(); - - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH; - SSYNC(); - - *pUART_DLL = hw_baud_table[i].dl_low; - SSYNC(); - *pUART_DLH = hw_baud_table[i].dl_high; - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER; - SSYNC(); - - /* Enable ERBFI and ELSI interrupts - * to poll SIC_ISR register*/ - *pUART_IER = ELSI | ERBFI | ETBEI; - SSYNC(); - - /* Set LCR to Word Lengh 8-bit word select */ - *pUART_LCR = WLS_8; - SSYNC(); - - return; -} - -int serial_init(void) -{ - serial_setbrg(); - return (0); -} - -void serial_putc(const char c) -{ - if ((*pUART_LSR) & TEMT) { - if (c == '\n') - serial_putc('\r'); - - local_put_char(c); - } - - while (!((*pUART_LSR) & TEMT)) - SYNC_ALL; - - return; -} - -int serial_tstc(void) -{ - if (*pUART_LSR & DR) - return 1; - else - return 0; -} - -int serial_getc(void) -{ - unsigned short uart_lsr_val, uart_rbr_val; - unsigned long isr_val; - int ret; - - /* Poll for RX Interrupt */ - while (!serial_tstc()) - continue; - asm("csync;"); - - uart_lsr_val = *pUART_LSR; /* Clear status bit */ - uart_rbr_val = *pUART_RBR; /* getc() */ - - if (uart_lsr_val & (OE|PE|FE|BI)) { - ret = -1; - } else { - ret = uart_rbr_val & 0xff; - } - - return ret; -} - -void serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - -static void local_put_char(char ch) -{ - int flags = 0; - unsigned long isr_val; - - /* Poll for TX Interruput */ - while (!(*pUART_LSR & THRE)) - continue; - asm("csync;"); - - *pUART_THR = ch; /* putc() */ - - return; -} diff --git a/cpu/bf533/start.S b/cpu/bf533/start.S deleted file mode 100644 index c32fef6..0000000 --- a/cpu/bf533/start.S +++ /dev/null @@ -1,313 +0,0 @@ -/* - * U-boot - start.S Startup file of u-boot for BF533/BF561 - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on head.S - * Copyright (c) 2003 Metrowerks/Motorola - * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * (c) 1995, Dionne & Associates - * (c) 1995, DKG Display Tech. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* - * Note: A change in this file subsequently requires a change in - * board/$(board_name)/config.mk for a valid u-boot.bin - */ - -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> - -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/dma.h> -#include <asm/mach-common/bits/pll.h> - -.global _stext; -.global __bss_start; -.global start; -.global _start; -.global edata; -.global _exit; -.global init_sdram; - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -.text -_start: -start: -_stext: - - R0 = 0x32; - SYSCFG = R0; - SSYNC; - - /* As per HW reference manual DAG registers, - * DATA and Address resgister shall be zero'd - * in initialization, after a reset state - */ - r1 = 0; /* Data registers zero'd */ - r2 = 0; - r3 = 0; - r4 = 0; - r5 = 0; - r6 = 0; - r7 = 0; - - p0 = 0; /* Address registers zero'd */ - p1 = 0; - p2 = 0; - p3 = 0; - p4 = 0; - p5 = 0; - - i0 = 0; /* DAG Registers zero'd */ - i1 = 0; - i2 = 0; - i3 = 0; - m0 = 0; - m1 = 0; - m3 = 0; - m3 = 0; - l0 = 0; - l1 = 0; - l2 = 0; - l3 = 0; - b0 = 0; - b1 = 0; - b2 = 0; - b3 = 0; - - /* Set loop counters to zero, to make sure that - * hw loops are disabled. - */ - r0 = 0; - lc0 = r0; - lc1 = r0; - - SSYNC; - - /* Check soft reset status */ - p0.h = SWRST >> 16; - p0.l = SWRST & 0xFFFF; - r0.l = w[p0]; - - cc = bittst(r0, 15); - if !cc jump no_soft_reset; - - /* Clear Soft reset */ - r0 = 0x0000; - w[p0] = r0; - ssync; - -no_soft_reset: - nop; - - /* Clear EVT registers */ - p0.h = (EVT0 >> 16); - p0.l = (EVT0 & 0xFFFF); - p0 += 8; - p1 = 14; - r1 = 0; - LSETUP(4,4) lc0 = p1; - [ p0 ++ ] = r1; - - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = 0x1; - w[p0] = r0.l; - SSYNC; - - sp.l = (0xffb01000 & 0xFFFF); - sp.h = (0xffb01000 >> 16); - - call init_sdram; - - /* relocate into to RAM */ - call get_pc; -offset: - r2.l = offset; - r2.h = offset; - r3.l = start; - r3.h = start; - r1 = r2 - r3; - - r0 = r0 - r1; - p1 = r0; - - p2.l = (CFG_MONITOR_BASE & 0xffff); - p2.h = (CFG_MONITOR_BASE >> 16); - - p3 = 0x04; - p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff); - p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16); -loop1: - r1 = [p1 ++ p3]; - [p2 ++ p3] = r1; - cc=p2==p4; - if !cc jump loop1; - /* - * configure STACK - */ - r0.h = (CONFIG_STACKBASE >> 16); - r0.l = (CONFIG_STACKBASE & 0xFFFF); - sp = r0; - fp = sp; - - /* - * This next section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* To keep ourselves in the supervisor mode */ - p0.l = (EVT15 & 0xFFFF); - p0.h = (EVT15 >> 16); - - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - - p0.l = (IMASK & 0xFFFF); - p0.h = (IMASK >> 16); - r0.l = LO(EVT_IVG15); - r0.h = HI(EVT_IVG15); - [p0] = r0; - raise 15; - p0.l = WAIT_HERE; - p0.h = WAIT_HERE; - reti = p0; - rti; - -WAIT_HERE: - jump WAIT_HERE; - -.global _real_start; -_real_start: - [ -- sp ] = reti; - - /* DMA reset code to Hi of L1 SRAM */ -copy: - /* P1 Points to the beginning of SYSTEM MMR Space */ - P1.H = hi(SYSMMR_BASE); - P1.L = lo(SYSMMR_BASE); - - R0.H = reset_start; /* Source Address (high) */ - R0.L = reset_start; /* Source Address (low) */ - R1.H = reset_end; - R1.L = reset_end; - R2 = R1 - R0; /* Count */ - R1.H = hi(L1_INST_SRAM); /* Destination Address (high) */ - R1.L = lo(L1_INST_SRAM); /* Destination Address (low) */ - R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ - /* Destination DMAConfig Value (8-bit words) */ - R4.L = (DI_EN | WNR | DMAEN); - -DMA: - R6 = 0x1 (Z); - W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ - W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ - - [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ - W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ - /* Set Source DMAConfig = DMA Enable, - Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ - W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; - - /* Set Destination Base Address */ - [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; - W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ - /* Set Destination DMAConfig = DMA Enable, - Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ - W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; - -WAIT_DMA_DONE: - p0.h = hi(MDMA_D0_IRQ_STATUS); - p0.l = lo(MDMA_D0_IRQ_STATUS); - R0 = W[P0](Z); - CC = BITTST(R0, 0); - if ! CC jump WAIT_DMA_DONE - - R0 = 0x1; - - /* Write 1 to clear DMA interrupt */ - W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; - - /* Initialize BSS Section with 0 s */ - p1.l = __bss_start; - p1.h = __bss_start; - p2.l = _end; - p2.h = _end; - r1 = p1; - r2 = p2; - r3 = r2 - r1; - r3 = r3 >> 2; - p3 = r3; - lsetup (_clear_bss, _clear_bss_end ) lc1 = p3; - CC = p2<=p1; - if CC jump _clear_bss_skip; - r0 = 0; -_clear_bss: -_clear_bss_end: - [p1++] = r0; -_clear_bss_skip: - - p0.l = _start1; - p0.h = _start1; - jump (p0); - -reset_start: - p0.h = WDOG_CNT >> 16; - p0.l = WDOG_CNT & 0xffff; - r0 = 0x0010; - w[p0] = r0; - p0.h = WDOG_CTL >> 16; - p0.l = WDOG_CTL & 0xffff; - r0 = 0x0000; - w[p0] = r0; -reset_wait: - jump reset_wait; - -reset_end: nop; - -_exit: - jump.s _exit; -get_pc: - r0 = rets; - rts; diff --git a/cpu/bf533/traps.c b/cpu/bf533/traps.c deleted file mode 100644 index 7e156d5..0000000 --- a/cpu/bf533/traps.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * U-boot - traps.c Routines related to interrupts and exceptions - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * No original Copyright holder listed, - * Probabily original (C) Roman Zippel (assigned DJD, 1999) - * - * Copyright 2003 Metrowerks - for Blackfin - * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca> - * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <linux/types.h> -#include <asm/errno.h> -#include <asm/system.h> -#include <asm/traps.h> -#include "cpu.h" -#include <asm/cplb.h> -#include <asm/io.h> -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/mpu.h> - -void init_IRQ(void) -{ - blackfin_init_IRQ(); - return; -} - -void process_int(unsigned long vec, struct pt_regs *fp) -{ - printf("interrupt\n"); - return; -} - -extern unsigned int icplb_table[page_descriptor_table_size][2]; -extern unsigned int dcplb_table[page_descriptor_table_size][2]; - -unsigned long last_cplb_fault_retx; - -static unsigned int cplb_sizes[4] = - { 1024, 4 * 1024, 1024 * 1024, 4 * 1024 * 1024 }; - -void trap_c(struct pt_regs *regs) -{ - unsigned int addr; - unsigned long trapnr = (regs->seqstat) & EXCAUSE; - unsigned int i, j, size, *I0, *I1; - unsigned short data = 0; - - switch (trapnr) { - /* 0x26 - Data CPLB Miss */ - case VEC_CPLB_M: - -#if ANOMALY_05000261 - /* - * Work around an anomaly: if we see a new DCPLB fault, - * return without doing anything. Then, - * if we get the same fault again, handle it. - */ - addr = last_cplb_fault_retx; - last_cplb_fault_retx = regs->retx; - printf("this time, curr = 0x%08x last = 0x%08x\n", - addr, last_cplb_fault_retx); - if (addr != last_cplb_fault_retx) - goto trap_c_return; -#endif - data = 1; - - case VEC_CPLB_I_M: - - if (data) { - addr = *(unsigned int *)pDCPLB_FAULT_ADDR; - } else { - addr = *(unsigned int *)pICPLB_FAULT_ADDR; - } - for (i = 0; i < page_descriptor_table_size; i++) { - if (data) { - size = cplb_sizes[dcplb_table[i][1] >> 16]; - j = dcplb_table[i][0]; - } else { - size = cplb_sizes[icplb_table[i][1] >> 16]; - j = icplb_table[i][0]; - } - if ((j <= addr) && ((j + size) > addr)) { - debug("found %i 0x%08x\n", i, j); - break; - } - } - if (i == page_descriptor_table_size) { - printf("something is really wrong\n"); - do_reset(NULL, 0, 0, NULL); - } - - /* Turn the cache off */ - if (data) { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL &= - ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - SSYNC(); - } else { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); - SSYNC(); - } - - if (data) { - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - } else { - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - } - - j = 0; - while (*I1 & CPLB_LOCK) { - debug("skipping %i %08p - %08x\n", j, I1, *I1); - *I0++; - *I1++; - j++; - } - - debug("remove %i 0x%08x 0x%08x\n", j, *I0, *I1); - - for (; j < 15; j++) { - debug("replace %i 0x%08x 0x%08x\n", j, I0, I0 + 1); - *I0++ = *(I0 + 1); - *I1++ = *(I1 + 1); - } - - if (data) { - *I0 = dcplb_table[i][0]; - *I1 = dcplb_table[i][1]; - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - } else { - *I0 = icplb_table[i][0]; - *I1 = icplb_table[i][1]; - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - } - - for (j = 0; j < 16; j++) { - debug("%i 0x%08x 0x%08x\n", j, *I0++, *I1++); - } - - /* Turn the cache back on */ - if (data) { - j = *(unsigned int *)DMEM_CONTROL; - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL = - ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | j; - SSYNC(); - } else { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; - SSYNC(); - } - - break; - default: - /* All traps come here */ - printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); - printf("stack frame=0x%x, ", (unsigned int)regs); - printf("bad PC=0x%04x\n", (unsigned int)regs->pc); - dump(regs); - printf("\n\n"); - - printf("Unhandled IRQ or exceptions!\n"); - printf("Please reset the board \n"); - do_reset(NULL, 0, 0, NULL); - } - - return; - -} - -void dump(struct pt_regs *fp) -{ - debug("RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n", - fp->rete, fp->retn, fp->retx, fp->rets); - debug("IPEND: %04lx SYSCFG: %04lx\n", fp->ipend, fp->syscfg); - debug("SEQSTAT: %08lx SP: %08lx\n", (long)fp->seqstat, (long)fp); - debug("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", - fp->r0, fp->r1, fp->r2, fp->r3); - debug("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", - fp->r4, fp->r5, fp->r6, fp->r7); - debug("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", - fp->p0, fp->p1, fp->p2, fp->p3); - debug("P4: %08lx P5: %08lx FP: %08lx\n", - fp->p4, fp->p5, fp->fp); - debug("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", - fp->a0w, fp->a0x, fp->a1w, fp->a1x); - - debug("LB0: %08lx LT0: %08lx LC0: %08lx\n", - fp->lb0, fp->lt0, fp->lc0); - debug("LB1: %08lx LT1: %08lx LC1: %08lx\n", - fp->lb1, fp->lt1, fp->lc1); - debug("B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n", - fp->b0, fp->l0, fp->m0, fp->i0); - debug("B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n", - fp->b1, fp->l1, fp->m1, fp->i1); - debug("B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n", - fp->b2, fp->l2, fp->m2, fp->i2); - debug("B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n", - fp->b3, fp->l3, fp->m3, fp->i3); - - debug("DCPLB_FAULT_ADDR=%p\n", *pDCPLB_FAULT_ADDR); - debug("ICPLB_FAULT_ADDR=%p\n", *pICPLB_FAULT_ADDR); - -} diff --git a/cpu/bf533/video.c b/cpu/bf533/video.c deleted file mode 100644 index 3ff0151..0000000 --- a/cpu/bf533/video.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * (C) Copyright 2000 - * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it - * (C) Copyright 2002 - * Wolfgang Denk, wd@denx.de - * (C) Copyright 2006 - * Aubrey Li, aubrey.li@analog.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <stdarg.h> -#include <common.h> -#include <config.h> -#include <asm/blackfin.h> -#include <i2c.h> -#include <linux/types.h> -#include <devices.h> - -#ifdef CONFIG_VIDEO -#define NTSC_FRAME_ADDR 0x06000000 -#include "video.h" - -/* NTSC OUTPUT SIZE 720 * 240 */ -#define VERTICAL 2 -#define HORIZONTAL 4 - -int is_vblank_line(const int line) -{ - /* - * This array contains a single bit for each line in - * an NTSC frame. - */ - if ((line <= 18) || (line >= 264 && line <= 281) || (line == 528)) - return true; - - return false; -} - -int NTSC_framebuffer_init(char *base_address) -{ - const int NTSC_frames = 1; - const int NTSC_lines = 525; - char *dest = base_address; - int frame_num, line_num; - - for (frame_num = 0; frame_num < NTSC_frames; ++frame_num) { - for (line_num = 1; line_num <= NTSC_lines; ++line_num) { - unsigned int code; - int offset = 0; - int i; - - if (is_vblank_line(line_num)) - offset++; - - if (line_num > 266 || line_num < 3) - offset += 2; - - /* Output EAV code */ - code = SystemCodeMap[offset].EAV; - write_dest_byte((char)(code >> 24) & 0xff); - write_dest_byte((char)(code >> 16) & 0xff); - write_dest_byte((char)(code >> 8) & 0xff); - write_dest_byte((char)(code) & 0xff); - - /* Output horizontal blanking */ - for (i = 0; i < 67 * 2; ++i) { - write_dest_byte(0x80); - write_dest_byte(0x10); - } - - /* Output SAV */ - code = SystemCodeMap[offset].SAV; - write_dest_byte((char)(code >> 24) & 0xff); - write_dest_byte((char)(code >> 16) & 0xff); - write_dest_byte((char)(code >> 8) & 0xff); - write_dest_byte((char)(code) & 0xff); - - /* Output empty horizontal data */ - for (i = 0; i < 360 * 2; ++i) { - write_dest_byte(0x80); - write_dest_byte(0x10); - } - } - } - - return dest - base_address; -} - -void fill_frame(char *Frame, int Value) -{ - int *OddPtr32; - int OddLine; - int *EvenPtr32; - int EvenLine; - int i; - int *data; - int m, n; - - /* fill odd and even frames */ - for (OddLine = 22, EvenLine = 285; OddLine < 263; OddLine++, EvenLine++) { - OddPtr32 = (int *)((Frame + (OddLine * 1716)) + 276); - EvenPtr32 = (int *)((Frame + (EvenLine * 1716)) + 276); - for (i = 0; i < 360; i++, OddPtr32++, EvenPtr32++) { - *OddPtr32 = Value; - *EvenPtr32 = Value; - } - } - - for (m = 0; m < VERTICAL; m++) { - data = (int *)u_boot_logo.data; - for (OddLine = (22 + m), EvenLine = (285 + m); - OddLine < (u_boot_logo.height * VERTICAL) + (22 + m); - OddLine += VERTICAL, EvenLine += VERTICAL) { - OddPtr32 = (int *)((Frame + ((OddLine) * 1716)) + 276); - EvenPtr32 = - (int *)((Frame + ((EvenLine) * 1716)) + 276); - for (i = 0; i < u_boot_logo.width / 2; i++) { - /* enlarge one pixel to m x n */ - for (n = 0; n < HORIZONTAL; n++) { - *OddPtr32++ = *data; - *EvenPtr32++ = *data; - } - data++; - } - } - } -} - -void video_putc(const char c) -{ -} - -void video_puts(const char *s) -{ -} - -static int video_init(void) -{ - char *NTSCFrame; - NTSCFrame = (char *)NTSC_FRAME_ADDR; - NTSC_framebuffer_init(NTSCFrame); - fill_frame(NTSCFrame, BLUE); - - *pPPI_CONTROL = 0x0082; - *pPPI_FRAME = 0x020D; - - *pDMA0_START_ADDR = NTSCFrame; - *pDMA0_X_COUNT = 0x035A; - *pDMA0_X_MODIFY = 0x0002; - *pDMA0_Y_COUNT = 0x020D; - *pDMA0_Y_MODIFY = 0x0002; - *pDMA0_CONFIG = 0x1015; - *pPPI_CONTROL = 0x0083; - return 0; -} - -int drv_video_init(void) -{ - int error, devices = 1; - - device_t videodev; - - video_init(); /* Video initialization */ - - memset(&videodev, 0, sizeof(videodev)); - - strcpy(videodev.name, "video"); - videodev.ext = DEV_EXT_VIDEO; /* Video extensions */ - videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */ - videodev.putc = video_putc; /* 'putc' function */ - videodev.puts = video_puts; /* 'puts' function */ - - error = device_register(&videodev); - - return (error == 0) ? devices : error; -} -#endif diff --git a/cpu/bf533/video.h b/cpu/bf533/video.h deleted file mode 100644 index d237f6a..0000000 --- a/cpu/bf533/video.h +++ /dev/null @@ -1,25 +0,0 @@ -#include <video_logo.h> -#define write_dest_byte(val) {*dest++=val;} -#define BLACK (0x01800180) /* black pixel pattern */ -#define BLUE (0x296E29F0) /* blue pixel pattern */ -#define RED (0x51F0515A) /* red pixel pattern */ -#define MAGENTA (0x6ADE6ACA) /* magenta pixel pattern */ -#define GREEN (0x91229136) /* green pixel pattern */ -#define CYAN (0xAA10AAA6) /* cyan pixel pattern */ -#define YELLOW (0xD292D210) /* yellow pixel pattern */ -#define WHITE (0xFE80FE80) /* white pixel pattern */ - -#define true 1 -#define false 0 - -typedef struct { - unsigned int SAV; - unsigned int EAV; -} SystemCodeType; - -const SystemCodeType SystemCodeMap[4] = { - {0xFF000080, 0xFF00009D}, - {0xFF0000AB, 0xFF0000B6}, - {0xFF0000C7, 0xFF0000DA}, - {0xFF0000EC, 0xFF0000F1} -}; diff --git a/cpu/bf537/Makefile b/cpu/bf537/Makefile deleted file mode 100644 index 06d1aae..0000000 --- a/cpu/bf537/Makefile +++ /dev/null @@ -1,52 +0,0 @@ -# U-boot - Makefile -# -# Copyright (c) 2005-2007 Analog Devices Inc. -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(CPU).a - -SOBJS = start.o start1.o interrupt.o cache.o flush.o init_sdram.o -COBJS = cpu.o traps.o ints.o serial.o interrupts.o video.o i2c.o - -EXTRA = init_sdram_bootrom_initblock.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) -START := $(addprefix $(obj),$(START)) - -all: $(obj).depend $(START) $(LIB) $(obj).depend $(EXTRA) - -$(LIB): $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/cpu/bf537/cache.S b/cpu/bf537/cache.S deleted file mode 100644 index d9015c6..0000000 --- a/cpu/bf537/cache.S +++ /dev/null @@ -1,129 +0,0 @@ -#define ASSEMBLY -#include <asm/linkage.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mach-common/bits/mpu.h> - -.text -.align 2 -ENTRY(_blackfin_icache_flush_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; - 1: - IFLUSH[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - IFLUSH[P0]; - SSYNC; - RTS; - -ENTRY(_blackfin_dcache_flush_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; -1: - FLUSH[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - FLUSH[P0]; - SSYNC; - RTS; - -ENTRY(_icache_invalidate) -ENTRY(_invalidate_entire_icache) - [--SP] = (R7:5); - - P0.L = (IMEM_CONTROL & 0xFFFF); - P0.H = (IMEM_CONTROL >> 16); - R7 =[P0]; - - /* - * Clear the IMC bit , All valid bits in the instruction - * cache are set to the invalid state - */ - BITCLR(R7, IMC_P); - CLI R6; - /* SSYNC required before invalidating cache. */ - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - /* Configures the instruction cache agian */ - R6 = (IMC | ENICPLB); - R7 = R7 | R6; - - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - (R7:5) =[SP++]; - RTS; - -/* - * Invalidate the Entire Data cache by - * clearing DMC[1:0] bits - */ -ENTRY(_invalidate_entire_dcache) -ENTRY(_dcache_invalidate) - [--SP] = (R7:6); - - P0.L = (DMEM_CONTROL & 0xFFFF); - P0.H = (DMEM_CONTROL >> 16); - R7 =[P0]; - - /* - * Clear the DMC[1:0] bits, All valid bits in the data - * cache are set to the invalid state - */ - BITCLR(R7, DMC0_P); - BITCLR(R7, DMC1_P); - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - /* Configures the data cache again */ - - R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - R7 = R7 | R6; - - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - (R7:6) =[SP++]; - RTS; - -ENTRY(_blackfin_dcache_invalidate_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; -1: - FLUSHINV[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - - /* - * If the data crosses a cache line, then we'll be pointing to - * the last cache line, but won't have flushed/invalidated it yet, so do - * one more. - */ - FLUSHINV[P0]; - SSYNC; - RTS; diff --git a/cpu/bf537/cpu.c b/cpu/bf537/cpu.c deleted file mode 100644 index 7233908..0000000 --- a/cpu/bf537/cpu.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * U-boot - cpu.c CPU specific functions - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <asm/blackfin.h> -#include <command.h> -#include <asm/entry.h> -#include <asm/cplb.h> -#include <asm/io.h> - -#define CACHE_ON 1 -#define CACHE_OFF 0 - -extern unsigned int icplb_table[page_descriptor_table_size][2]; -extern unsigned int dcplb_table[page_descriptor_table_size][2]; - -int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) -{ - __asm__ __volatile__("cli r3;" "P0 = %0;" "JUMP (P0);"::"r"(L1_INST_SRAM) - ); - - return 0; -} - -/* These functions are just used to satisfy the linker */ -int cpu_init(void) -{ - return 0; -} - -int cleanup_before_linux(void) -{ - return 0; -} - -void icache_enable(void) -{ - unsigned int *I0, *I1; - int i, j = 0; - - if ((*pCHIPID >> 28) < 2) - return; - - /* Before enable icache, disable it first */ - icache_disable(); - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - - /* make sure the locked ones go in first */ - for (i = 0; i < page_descriptor_table_size; i++) { - if (CPLB_LOCK & icplb_table[i][1]) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - icplb_table[i][0], icplb_table[i][1]); - *I0++ = icplb_table[i][0]; - *I1++ = icplb_table[i][1]; - j++; - } - } - - for (i = 0; i < page_descriptor_table_size; i++) { - if (!(CPLB_LOCK & icplb_table[i][1])) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - icplb_table[i][0], icplb_table[i][1]); - *I0++ = icplb_table[i][0]; - *I1++ = icplb_table[i][1]; - j++; - if (j == 16) { - break; - } - } - } - - /* Fill the rest with invalid entry */ - if (j <= 15) { - for (; j < 16; j++) { - debug("filling %i with 0", j); - *I1++ = 0x0; - } - - } - - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; - SSYNC(); -} - -void icache_disable(void) -{ - if ((*pCHIPID >> 28) < 2) - return; - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); - SSYNC(); -} - -int icache_status(void) -{ - unsigned int value; - value = *(unsigned int *)IMEM_CONTROL; - - if (value & (IMC | ENICPLB)) - return CACHE_ON; - else - return CACHE_OFF; -} - -void dcache_enable(void) -{ - unsigned int *I0, *I1; - unsigned int temp; - int i, j = 0; - - /* Before enable dcache, disable it first */ - dcache_disable(); - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - - /* make sure the locked ones go in first */ - for (i = 0; i < page_descriptor_table_size; i++) { - if (CPLB_LOCK & dcplb_table[i][1]) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - *I0++ = dcplb_table[i][0]; - *I1++ = dcplb_table[i][1]; - j++; - } else { - debug("skip %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - } - } - - for (i = 0; i < page_descriptor_table_size; i++) { - if (!(CPLB_LOCK & dcplb_table[i][1])) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - *I0++ = dcplb_table[i][0]; - *I1++ = dcplb_table[i][1]; - j++; - if (j == 16) { - break; - } - } - } - - /* Fill the rest with invalid entry */ - if (j <= 15) { - for (; j < 16; j++) { - debug("filling %i with 0", j); - *I1++ = 0x0; - } - } - - temp = *(unsigned int *)DMEM_CONTROL; - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL = - ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | temp; - SSYNC(); -} - -void dcache_disable(void) -{ - unsigned int *I0, *I1; - int i; - - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL &= - ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - SSYNC(); - - /* after disable dcache, - * clear it so we don't confuse the next application - */ - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - - for (i = 0; i < 16; i++) { - *I0++ = 0x0; - *I1++ = 0x0; - } -} - -int dcache_status(void) -{ - unsigned int value; - value = *(unsigned int *)DMEM_CONTROL; - - if (value & (ENDCPLB)) - return CACHE_ON; - else - return CACHE_OFF; -} diff --git a/cpu/bf537/cpu.h b/cpu/bf537/cpu.h deleted file mode 100644 index b6b73b1..0000000 --- a/cpu/bf537/cpu.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * U-boot - cpu.h - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _CPU_H_ -#define _CPU_H_ - -#include <command.h> - -#define INTERNAL_IRQS (32) -#define NUM_IRQ_NODES 16 -#define DEF_INTERRUPT_FLAGS 1 -#define MAX_TIM_LOAD 0xFFFFFFFF - -void blackfin_irq_panic(int reason, struct pt_regs *reg); -extern void dump(struct pt_regs *regs); -void display_excp(void); -asmlinkage void evt_nmi(void); -asmlinkage void evt_exception(void); -asmlinkage void trap(void); -asmlinkage void evt_ivhw(void); -asmlinkage void evt_rst(void); -asmlinkage void evt_timer(void); -asmlinkage void evt_evt7(void); -asmlinkage void evt_evt8(void); -asmlinkage void evt_evt9(void); -asmlinkage void evt_evt10(void); -asmlinkage void evt_evt11(void); -asmlinkage void evt_evt12(void); -asmlinkage void evt_evt13(void); -asmlinkage void evt_soft_int1(void); -asmlinkage void evt_system_call(void); -void blackfin_irq_panic(int reason, struct pt_regs *regs); -void blackfin_free_irq(unsigned int irq, void *dev_id); -void call_isr(int irq, struct pt_regs *fp); -void blackfin_do_irq(int vec, struct pt_regs *fp); -void blackfin_init_IRQ(void); -void blackfin_enable_irq(unsigned int irq); -void blackfin_disable_irq(unsigned int irq); -extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); -int blackfin_request_irq(unsigned int irq, - void (*handler) (int, void *, struct pt_regs *), - unsigned long flags, const char *devname, - void *dev_id); -void timer_init(void); -#endif diff --git a/cpu/bf537/flush.S b/cpu/bf537/flush.S deleted file mode 100644 index fbd26cc..0000000 --- a/cpu/bf537/flush.S +++ /dev/null @@ -1,403 +0,0 @@ -/* Copyright (C) 2003-2007 Analog Devices Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. - */ - -#define ASSEMBLY - -#include <asm/linkage.h> -#include <asm/cplb.h> -#include <config.h> -#include <asm/blackfin.h> - -.text - -/* This is an external function being called by the user - * application through __flush_cache_all. Currently this function - * serves the purpose of flushing all the pending writes in - * in the instruction cache. - */ - -ENTRY(_flush_instruction_cache) - [--SP] = ( R7:6, P5:4 ); - LINK 12; - SP += -12; - P5.H = (ICPLB_ADDR0 >> 16); - P5.L = (ICPLB_ADDR0 & 0xFFFF); - P4.H = (ICPLB_DATA0 >> 16); - P4.L = (ICPLB_DATA0 & 0xFFFF); - R7 = CPLB_VALID | CPLB_L1_CHBL; - R6 = 16; -inext: R0 = [P5++]; - R1 = [P4++]; - [--SP] = RETS; - CALL _icplb_flush; /* R0 = page, R1 = data*/ - RETS = [SP++]; -iskip: R6 += -1; - CC = R6; - IF CC JUMP inext; - SSYNC; - SP += 12; - UNLINK; - ( R7:6, P5:4 ) = [SP++]; - RTS; - -/* This is an internal function to flush all pending - * writes in the cache associated with a particular ICPLB. - * - * R0 - page's start address - * R1 - CPLB's data field. - */ - -.align 2 -ENTRY(_icplb_flush) - [--SP] = ( R7:0, P5:0 ); - [--SP] = LC0; - [--SP] = LT0; - [--SP] = LB0; - [--SP] = LC1; - [--SP] = LT1; - [--SP] = LB1; - - /* If it's a 1K or 4K page, then it's quickest to - * just systematically flush all the addresses in - * the page, regardless of whether they're in the - * cache, or dirty. If it's a 1M or 4M page, there - * are too many addresses, and we have to search the - * cache for lines corresponding to the page. - */ - - CC = BITTST(R1, 17); /* 1MB or 4MB */ - IF !CC JUMP iflush_whole_page; - - /* We're only interested in the page's size, so extract - * this from the CPLB (bits 17:16), and scale to give an - * offset into the page_size and page_prefix tables. - */ - - R1 <<= 14; - R1 >>= 30; - R1 <<= 2; - - /* We can also determine the sub-bank used, because this is - * taken from bits 13:12 of the address. - */ - - R3 = ((12<<8)|2); /* Extraction pattern */ - nop; /* Anamoly 05000209 */ - R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits */ - - /* Save in extraction pattern for later deposit. */ - R3.H = R4.L << 0; - - /* So: - * R0 = Page start - * R1 = Page length (actually, offset into size/prefix tables) - * R3 = sub-bank deposit values - * - * The cache has 2 Ways, and 64 sets, so we iterate through - * the sets, accessing the tag for each Way, for our Bank and - * sub-bank, looking for dirty, valid tags that match our - * address prefix. - */ - - P5.L = (ITEST_COMMAND & 0xFFFF); - P5.H = (ITEST_COMMAND >> 16); - P4.L = (ITEST_DATA0 & 0xFFFF); - P4.H = (ITEST_DATA0 >> 16); - - P0.L = page_prefix_table; - P0.H = page_prefix_table; - P1 = R1; - R5 = 0; /* Set counter*/ - P0 = P1 + P0; - R4 = [P0]; /* This is the address prefix*/ - - /* We're reading (bit 1==0) the tag (bit 2==0), and we - * don't care about which double-word, since we're only - * fetching tags, so we only have to set Set, Bank, - * Sub-bank and Way. - */ - - P2 = 4; - LSETUP (ifs1, ife1) LC1 = P2; -ifs1: P0 = 32; /* iterate over all sets*/ - LSETUP (ifs0, ife0) LC0 = P0; -ifs0: R6 = R5 << 5; /* Combine set*/ - R6.H = R3.H << 0 ; /* and sub-bank*/ - [P5] = R6; /* Issue Command*/ - SSYNC; /* CSYNC will not work here :(*/ - R7 = [P4]; /* and read Tag.*/ - CC = BITTST(R7, 0); /* Check if valid*/ - IF !CC JUMP ifskip; /* and skip if not.*/ - - /* Compare against the page address. First, plant bits 13:12 - * into the tag, since those aren't part of the returned data. - */ - - R7 = DEPOSIT(R7, R3); /* set 13:12*/ - R1 = R7 & R4; /* Mask off lower bits*/ - CC = R1 == R0; /* Compare against page start.*/ - IF !CC JUMP ifskip; /* Skip it if it doesn't match.*/ - - /* Tag address matches against page, so this is an entry - * we must flush. - */ - - R7 >>= 10; /* Mask off the non-address bits*/ - R7 <<= 10; - P3 = R7; - IFLUSH [P3]; /* And flush the entry*/ -ifskip: -ife0: R5 += 1; /* Advance to next Set*/ -ife1: NOP; - -ifinished: - SSYNC; /* Ensure the data gets out to mem.*/ - - /*Finished. Restore context.*/ - LB1 = [SP++]; - LT1 = [SP++]; - LC1 = [SP++]; - LB0 = [SP++]; - LT0 = [SP++]; - LC0 = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; - -iflush_whole_page: - /* It's a 1K or 4K page, so quicker to just flush the - * entire page. - */ - - P1 = 32; /* For 1K pages*/ - P2 = P1 << 2; /* For 4K pages*/ - P0 = R0; /* Start of page*/ - CC = BITTST(R1, 16); /* Whether 1K or 4K*/ - IF CC P1 = P2; - P1 += -1; /* Unroll one iteration*/ - SSYNC; - IFLUSH [P0++]; /* because CSYNC can't end loops.*/ - LSETUP (isall, ieall) LC0 = P1; -isall:IFLUSH [P0++]; -ieall: NOP; - SSYNC; - JUMP ifinished; - -/* This is an external function being called by the user - * application through __flush_cache_all. Currently this function - * serves the purpose of flushing all the pending writes in - * in the data cache. - */ - -ENTRY(_flush_data_cache) - [--SP] = ( R7:6, P5:4 ); - LINK 12; - SP += -12; - P5.H = (DCPLB_ADDR0 >> 16); - P5.L = (DCPLB_ADDR0 & 0xFFFF); - P4.H = (DCPLB_DATA0 >> 16); - P4.L = (DCPLB_DATA0 & 0xFFFF); - R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z); - R6 = 16; -next: R0 = [P5++]; - R1 = [P4++]; - CC = BITTST(R1, 14); /* Is it write-through?*/ - IF CC JUMP skip; /* If so, ignore it.*/ - R2 = R1 & R7; /* Is it a dirty, cached page?*/ - CC = R2; - IF !CC JUMP skip; /* If not, ignore it.*/ - [--SP] = RETS; - CALL _dcplb_flush; /* R0 = page, R1 = data*/ - RETS = [SP++]; -skip: R6 += -1; - CC = R6; - IF CC JUMP next; - SSYNC; - SP += 12; - UNLINK; - ( R7:6, P5:4 ) = [SP++]; - RTS; - -/* This is an internal function to flush all pending - * writes in the cache associated with a particular DCPLB. - * - * R0 - page's start address - * R1 - CPLB's data field. - */ - -.align 2 -ENTRY(_dcplb_flush) - [--SP] = ( R7:0, P5:0 ); - [--SP] = LC0; - [--SP] = LT0; - [--SP] = LB0; - [--SP] = LC1; - [--SP] = LT1; - [--SP] = LB1; - - /* If it's a 1K or 4K page, then it's quickest to - * just systematically flush all the addresses in - * the page, regardless of whether they're in the - * cache, or dirty. If it's a 1M or 4M page, there - * are too many addresses, and we have to search the - * cache for lines corresponding to the page. - */ - - CC = BITTST(R1, 17); /* 1MB or 4MB */ - IF !CC JUMP dflush_whole_page; - - /* We're only interested in the page's size, so extract - * this from the CPLB (bits 17:16), and scale to give an - * offset into the page_size and page_prefix tables. - */ - - R1 <<= 14; - R1 >>= 30; - R1 <<= 2; - - /* The page could be mapped into Bank A or Bank B, depending - * on (a) whether both banks are configured as cache, and - * (b) on whether address bit A[x] is set. x is determined - * by DCBS in DMEM_CONTROL - */ - - R2 = 0; /* Default to Bank A (Bank B would be 1)*/ - - P0.L = (DMEM_CONTROL & 0xFFFF); - P0.H = (DMEM_CONTROL >> 16); - - R3 = [P0]; /* If Bank B is not enabled as cache*/ - CC = BITTST(R3, 2); /* then Bank A is our only option.*/ - IF CC JUMP bank_chosen; - - R4 = 1<<14; /* If DCBS==0, use A[14].*/ - R5 = R4 << 7; /* If DCBS==1, use A[23];*/ - CC = BITTST(R3, 4); - IF CC R4 = R5; /* R4 now has either bit 14 or bit 23 set.*/ - R5 = R0 & R4; /* Use it to test the Page address*/ - CC = R5; /* and if that bit is set, we use Bank B,*/ - R2 = CC; /* else we use Bank A.*/ - R2 <<= 23; /* The Bank selection's at posn 23.*/ - -bank_chosen: - - /* We can also determine the sub-bank used, because this is - * taken from bits 13:12 of the address. - */ - - R3 = ((12<<8)|2); /* Extraction pattern */ - nop; /*Anamoly 05000209*/ - R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ - /* Save in extraction pattern for later deposit.*/ - R3.H = R4.L << 0; - - /* So: - * R0 = Page start - * R1 = Page length (actually, offset into size/prefix tables) - * R2 = Bank select mask - * R3 = sub-bank deposit values - * - * The cache has 2 Ways, and 64 sets, so we iterate through - * the sets, accessing the tag for each Way, for our Bank and - * sub-bank, looking for dirty, valid tags that match our - * address prefix. - */ - - P5.L = (DTEST_COMMAND & 0xFFFF); - P5.H = (DTEST_COMMAND >> 16); - P4.L = (DTEST_DATA0 & 0xFFFF); - P4.H = (DTEST_DATA0 >> 16); - - P0.L = page_prefix_table; - P0.H = page_prefix_table; - P1 = R1; - R5 = 0; /* Set counter*/ - P0 = P1 + P0; - R4 = [P0]; /* This is the address prefix*/ - - - /* We're reading (bit 1==0) the tag (bit 2==0), and we - * don't care about which double-word, since we're only - * fetching tags, so we only have to set Set, Bank, - * Sub-bank and Way. - */ - - P2 = 2; - LSETUP (fs1, fe1) LC1 = P2; -fs1: P0 = 64; /* iterate over all sets*/ - LSETUP (fs0, fe0) LC0 = P0; -fs0: R6 = R5 << 5; /* Combine set*/ - R6.H = R3.H << 0 ; /* and sub-bank*/ - R6 = R6 | R2; /* and Bank. Leave Way==0 at first.*/ - BITSET(R6,14); - [P5] = R6; /* Issue Command*/ - SSYNC; - R7 = [P4]; /* and read Tag.*/ - CC = BITTST(R7, 0); /* Check if valid*/ - IF !CC JUMP fskip; /* and skip if not.*/ - CC = BITTST(R7, 1); /* Check if dirty*/ - IF !CC JUMP fskip; /* and skip if not.*/ - - /* Compare against the page address. First, plant bits 13:12 - * into the tag, since those aren't part of the returned data. - */ - - R7 = DEPOSIT(R7, R3); /* set 13:12*/ - R1 = R7 & R4; /* Mask off lower bits*/ - CC = R1 == R0; /* Compare against page start.*/ - IF !CC JUMP fskip; /* Skip it if it doesn't match.*/ - - /* Tag address matches against page, so this is an entry - * we must flush. - */ - - R7 >>= 10; /* Mask off the non-address bits*/ - R7 <<= 10; - P3 = R7; - SSYNC; - FLUSHINV [P3]; /* And flush the entry*/ -fskip: -fe0: R5 += 1; /* Advance to next Set*/ -fe1: BITSET(R2, 26); /* Go to next Way.*/ - -dfinished: - SSYNC; /* Ensure the data gets out to mem.*/ - - /*Finished. Restore context.*/ - LB1 = [SP++]; - LT1 = [SP++]; - LC1 = [SP++]; - LB0 = [SP++]; - LT0 = [SP++]; - LC0 = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; - -dflush_whole_page: - - /* It's a 1K or 4K page, so quicker to just flush the - * entire page. - */ - - P1 = 32; /* For 1K pages*/ - P2 = P1 << 2; /* For 4K pages*/ - P0 = R0; /* Start of page*/ - CC = BITTST(R1, 16); /* Whether 1K or 4K*/ - IF CC P1 = P2; - P1 += -1; /* Unroll one iteration*/ - SSYNC; - FLUSHINV [P0++]; /* because CSYNC can't end loops.*/ - LSETUP (eall, eall) LC0 = P1; -eall: FLUSHINV [P0++]; - SSYNC; - JUMP dfinished; - -.align 4; -page_prefix_table: -.byte4 0xFFFFFC00; /* 1K */ -.byte4 0xFFFFF000; /* 4K */ -.byte4 0xFFF00000; /* 1M */ -.byte4 0xFFC00000; /* 4M */ -.page_prefix_table.end: diff --git a/cpu/bf537/init_sdram.S b/cpu/bf537/init_sdram.S deleted file mode 100644 index e997500..0000000 --- a/cpu/bf537/init_sdram.S +++ /dev/null @@ -1,178 +0,0 @@ -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mem_init.h> -#include <asm/mach-common/bits/bootrom.h> -#include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/pll.h> -#include <asm/mach-common/bits/uart.h> -.global init_sdram; - -#if (BFIN_BOOT_MODE != BF537_UART_BOOT) -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif -#endif - -init_sdram: - [--SP] = ASTAT; - [--SP] = RETS; - [--SP] = (R7:0); - [--SP] = (P5:0); - -#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = 0x1; - w[p0] = r0.l; - SSYNC; - - p0.h = hi(SPI_BAUD); - p0.l = lo(SPI_BAUD); - r0.l = CONFIG_SPI_BAUD; - w[p0] = r0.l; - SSYNC; -#endif - -#if (BFIN_BOOT_MODE != BF537_UART_BOOT) - -#ifdef CONFIG_BF537 - /* Enable PHY CLK buffer output */ - p0.h = hi(VR_CTL); - p0.l = lo(VR_CTL); - r0.l = w[p0]; - bitset(r0, 14); - w[p0] = r0.l; - ssync; -#endif - /* - * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable - */ - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - /* - * Put SDRAM in self-refresh, incase anything is running - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - /* - * Set PLL_CTL with the value that we calculate in R0 - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -check_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump check_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; -#endif - - /* - * Now, Initialize the SDRAM, - * start with the SDRAM Refresh Rate Control Register - */ - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Memory Bank Control Register - bank specific parameters - */ - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Global Control Register - global programmable parameters - * Disable self-refresh - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - - /* - * Check if SDRAM is already powered up, if it is, enable self-refresh - */ - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump skip; - NOP; - BITSET (R0, 23); -skip: - [P2] = R0; - SSYNC; - - /* Write in the new value in the register */ - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - [P2] = R0; - SSYNC; - nop; - - (P5:0) = [SP++]; - (R7:0) = [SP++]; - RETS = [SP++]; - ASTAT = [SP++]; - RTS; diff --git a/cpu/bf537/init_sdram_bootrom_initblock.S b/cpu/bf537/init_sdram_bootrom_initblock.S deleted file mode 100644 index 197b836..0000000 --- a/cpu/bf537/init_sdram_bootrom_initblock.S +++ /dev/null @@ -1,203 +0,0 @@ -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mem_init.h> -#include <asm/mach-common/bits/bootrom.h> -#include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/pll.h> -#include <asm/mach-common/bits/uart.h> -.global init_sdram; - -#if (BFIN_BOOT_MODE != BF537_UART_BOOT) -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif -#endif - -init_sdram: - [--SP] = ASTAT; - [--SP] = RETS; - [--SP] = (R7:0); - [--SP] = (P5:0); - -#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = 0x1; - w[p0] = r0.l; - SSYNC; - - p0.h = hi(SPI_BAUD); - p0.l = lo(SPI_BAUD); - r0.l = CONFIG_SPI_BAUD_INITBLOCK; - w[p0] = r0.l; - SSYNC; -#endif - -#if (BFIN_BOOT_MODE != BF537_UART_BOOT) - -#ifdef CONFIG_BF537 - /* Enable PHY CLK buffer output */ - p0.h = hi(VR_CTL); - p0.l = lo(VR_CTL); - r0.l = w[p0]; - bitset(r0, 14); - w[p0] = r0.l; - ssync; -#endif - /* - * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable - */ - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - /* - * Put SDRAM in self-refresh, incase anything is running - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - /* - * Set PLL_CTL with the value that we calculate in R0 - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -check_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump check_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; -#endif - - /* - * We now are running at speed, time to set the Async mem bank wait states - * This will speed up execution, since we are normally running from FLASH. - */ - - p2.h = (EBIU_AMBCTL1 >> 16); - p2.l = (EBIU_AMBCTL1 & 0xFFFF); - r0.h = (AMBCTL1VAL >> 16); - r0.l = (AMBCTL1VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMBCTL0 >> 16); - p2.l = (EBIU_AMBCTL0 & 0xFFFF); - r0.h = (AMBCTL0VAL >> 16); - r0.l = (AMBCTL0VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMGCTL >> 16); - p2.l = (EBIU_AMGCTL & 0xffff); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* - * Now, Initialize the SDRAM, - * start with the SDRAM Refresh Rate Control Register - */ - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Memory Bank Control Register - bank specific parameters - */ - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Global Control Register - global programmable parameters - * Disable self-refresh - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - - /* - * Check if SDRAM is already powered up, if it is, enable self-refresh - */ - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump skip; - NOP; - BITSET (R0, 23); -skip: - [P2] = R0; - SSYNC; - - /* Write in the new value in the register */ - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - [P2] = R0; - SSYNC; - nop; - - (P5:0) = [SP++]; - (R7:0) = [SP++]; - RETS = [SP++]; - ASTAT = [SP++]; - RTS; diff --git a/cpu/bf537/interrupt.S b/cpu/bf537/interrupt.S deleted file mode 100644 index fe850bf..0000000 --- a/cpu/bf537/interrupt.S +++ /dev/null @@ -1,244 +0,0 @@ -/* - * U-boot - interrupt.S Processing of interrupts and exception handling - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on interrupt.S - * - * Copyright (C) 2003 Metrowerks, Inc. <mwaddel@metrowerks.com> - * Copyright (C) 2002 Arcturus Networks Ltd. Ted Ma <mated@sympatico.ca> - * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * - * (c) 1995, Dionne & Associates - * (c) 1995, DKG Display Tech. - * - * This file is also based on exception.asm - * (C) Copyright 2001-2005 - Analog Devices, Inc. All rights reserved. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define ASSEMBLY -#include <config.h> -#include <asm/blackfin.h> -#include <asm/entry.h> - -.global _blackfin_irq_panic; - -.text -.align 2 - -#ifndef CONFIG_KGDB -.global _evt_emulation -_evt_emulation: - SAVE_CONTEXT - r0 = 0; - r1 = seqstat; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - rte; -#endif - -.global _evt_nmi -_evt_nmi: - SAVE_CONTEXT - r0 = 2; - r1 = RETN; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - -_evt_nmi_exit: - rtn; - -.global _trap -_trap: - SAVE_ALL_SYS - r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ - sp += -12; - call _trap_c - sp += 12; - RESTORE_ALL_SYS - rtx; - -.global _evt_rst -_evt_rst: - SAVE_CONTEXT - r0 = 1; - r1 = RETN; - sp += -12; - call _do_reset; - sp += 12; - -_evt_rst_exit: - rtn; - -irq_panic: - r0 = 3; - r1 = sp; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - -.global _evt_ivhw -_evt_ivhw: - SAVE_CONTEXT - RAISE 14; - -_evt_ivhw_exit: - rti; - -.global _evt_timer -_evt_timer: - SAVE_CONTEXT - r0 = 6; - sp += -12; - /* Polling method used now. */ - /* call timer_int; */ - sp += 12; - RESTORE_CONTEXT - rti; - nop; - -.global _evt_evt7 -_evt_evt7: - SAVE_CONTEXT - r0 = 7; - sp += -12; - call _process_int; - sp += 12; - -evt_evt7_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt8 -_evt_evt8: - SAVE_CONTEXT - r0 = 8; - sp += -12; - call _process_int; - sp += 12; - -evt_evt8_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt9 -_evt_evt9: - SAVE_CONTEXT - r0 = 9; - sp += -12; - call _process_int; - sp += 12; - -evt_evt9_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt10 -_evt_evt10: - SAVE_CONTEXT - r0 = 10; - sp += -12; - call _process_int; - sp += 12; - -evt_evt10_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt11 -_evt_evt11: - SAVE_CONTEXT - r0 = 11; - sp += -12; - call _process_int; - sp += 12; - -evt_evt11_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt12 -_evt_evt12: - SAVE_CONTEXT - r0 = 12; - sp += -12; - call _process_int; - sp += 12; -evt_evt12_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt13 -_evt_evt13: - SAVE_CONTEXT - r0 = 13; - sp += -12; - call _process_int; - sp += 12; - -evt_evt13_exit: - RESTORE_CONTEXT - rti; - -.global _evt_system_call -_evt_system_call: - [--sp] = r0; - [--SP] = RETI; - r0 = [sp++]; - r0 += 2; - [--sp] = r0; - RETI = [SP++]; - r0 = [SP++]; - SAVE_CONTEXT - sp += -12; - call _exception_handle; - sp += 12; - RESTORE_CONTEXT - RTI; - -evt_system_call_exit: - rti; - -.global _evt_soft_int1 -_evt_soft_int1: - [--sp] = r0; - [--SP] = RETI; - r0 = [sp++]; - r0 += 2; - [--sp] = r0; - RETI = [SP++]; - r0 = [SP++]; - SAVE_CONTEXT - sp += -12; - call _exception_handle; - sp += 12; - RESTORE_CONTEXT - RTI; - -evt_soft_int1_exit: - rti; diff --git a/cpu/bf537/interrupts.c b/cpu/bf537/interrupts.c deleted file mode 100644 index 853fa49..0000000 --- a/cpu/bf537/interrupts.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * U-boot - interrupts.c Interrupt related routines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on interrupts.c - * Copyright 1996 Roman Zippel - * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> - * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> - * Copyright 2003 Metrowerks/Motorola - * Copyright 2003 Bas Vermeulen <bas@buyways.nl>, - * BuyWays B.V. (www.buyways.nl) - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <config.h> -#include <asm/blackfin.h> -#include "cpu.h" - -static ulong timestamp; -static ulong last_time; -static int int_flag; - -int irq_flags; /* needed by asm-blackfin/system.h */ - -/* Functions just to satisfy the linker */ - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On BF533 it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On BF533 it returns the number of timer ticks per second. - */ -ulong get_tbclk (void) -{ - ulong tbclk; - - tbclk = CFG_HZ; - return tbclk; -} - -void enable_interrupts(void) -{ -} - -int disable_interrupts(void) -{ - return 1; -} - -int interrupt_init(void) -{ - return (0); -} - -void udelay(unsigned long usec) -{ - unsigned long delay, start, stop; - unsigned long cclk; - cclk = (CONFIG_CCLK_HZ); - - while (usec > 1) { - /* - * how many clock ticks to delay? - * - request(in useconds) * clock_ticks(Hz) / useconds/second - */ - if (usec < 1000) { - delay = (usec * (cclk / 244)) >> 12; - usec = 0; - } else { - delay = (1000 * (cclk / 244)) >> 12; - usec -= 1000; - } - - asm volatile (" %0 = CYCLES;":"=r" (start)); - do { - asm volatile (" %0 = CYCLES; ":"=r" (stop)); - } while (stop - start < delay); - } - - return; -} - -void timer_init(void) -{ - *pTCNTL = 0x1; - *pTSCALE = 0x0; - *pTCOUNT = MAX_TIM_LOAD; - *pTPERIOD = MAX_TIM_LOAD; - *pTCNTL = 0x7; - asm("CSYNC;"); - - timestamp = 0; - last_time = 0; -} - -/* Any network command or flash - * command is started get_timer shall - * be called before TCOUNT gets reset, - * to implement the accurate timeouts. - * - * How ever milliconds doesn't return - * the number that has been elapsed from - * the last reset. - * - * As get_timer is used in the u-boot - * only for timeouts this should be - * sufficient - */ -ulong get_timer(ulong base) -{ - ulong milisec; - - /* Number of clocks elapsed */ - ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT)); - - /** - * Find if the TCOUNT is reset - * timestamp gives the number of times - * TCOUNT got reset - */ - if (clocks < last_time) - timestamp++; - last_time = clocks; - - /* Get the number of milliseconds */ - milisec = clocks / (CONFIG_CCLK_HZ / 1000); - - /** - * Find the number of millisonds - * that got elapsed before this TCOUNT cycle - */ - milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000)); - - return (milisec - base); -} - -void reset_timer (void) -{ - timestamp = 0; -} diff --git a/cpu/bf537/ints.c b/cpu/bf537/ints.c deleted file mode 100644 index 05d9a1b..0000000 --- a/cpu/bf537/ints.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * U-boot - ints.c Interrupt related routines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on ints.c - * - * Apr18 2003, Changed by HuTao to support interrupt cascading for Blackfin - * drivers - * - * Copyright 1996 Roman Zippel - * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> - * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> - * Copyright 2003 Metrowerks/Motorola - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <linux/stddef.h> -#include <asm/system.h> -#include <asm/traps.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <asm/blackfin.h> -#include "cpu.h" - -void blackfin_irq_panic(int reason, struct pt_regs *regs) -{ - printf("\n\nException: IRQ 0x%x entered\n", reason); - printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); - printf("stack frame=0x%x, ", (unsigned int)regs); - printf("bad PC=0x%04x\n", (unsigned int)regs->pc); - dump(regs); - printf("Unhandled IRQ or exceptions!\n"); - printf("Please reset the board \n"); -} - -void blackfin_init_IRQ(void) -{ - *(unsigned volatile long *)(SIC_IMASK) = 0; -#ifndef CONFIG_KGDB - *(unsigned volatile long *)(EVT1) = 0x0; -#endif - *(unsigned volatile long *)(EVT2) = - (unsigned volatile long)evt_nmi; - *(unsigned volatile long *)(EVT3) = - (unsigned volatile long)trap; - *(unsigned volatile long *)(EVT5) = - (unsigned volatile long)evt_ivhw; - *(unsigned volatile long *)(EVT0) = - (unsigned volatile long)evt_rst; - *(unsigned volatile long *)(EVT6) = - (unsigned volatile long)evt_timer; - *(unsigned volatile long *)(EVT7) = - (unsigned volatile long)evt_evt7; - *(unsigned volatile long *)(EVT8) = - (unsigned volatile long)evt_evt8; - *(unsigned volatile long *)(EVT9) = - (unsigned volatile long)evt_evt9; - *(unsigned volatile long *)(EVT10) = - (unsigned volatile long)evt_evt10; - *(unsigned volatile long *)(EVT11) = - (unsigned volatile long)evt_evt11; - *(unsigned volatile long *)(EVT12) = - (unsigned volatile long)evt_evt12; - *(unsigned volatile long *)(EVT13) = - (unsigned volatile long)evt_evt13; - *(unsigned volatile long *)(EVT14) = - (unsigned volatile long)evt_system_call; - *(unsigned volatile long *)(EVT15) = - (unsigned volatile long)evt_soft_int1; - *(volatile unsigned long *)ILAT = 0; - asm("csync;"); - *(volatile unsigned long *)IMASK = 0xffbf; - asm("csync;"); -} - -void exception_handle(void) -{ -#if defined (CONFIG_PANIC_HANG) - display_excp(); -#else - udelay(100000); /* allow messages to go out */ - do_reset(NULL, 0, 0, NULL); -#endif -} - -void display_excp(void) -{ - printf("Exception!\n"); -} diff --git a/cpu/bf537/serial.c b/cpu/bf537/serial.c deleted file mode 100644 index 3c6a370..0000000 --- a/cpu/bf537/serial.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * U-boot - serial.c Serial driver for BF537 - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * bf537_serial.c: Serial driver for BlackFin BF537 internal UART. - * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>, - * BuyWays B.V. (www.buyways.nl) - * - * Based heavily on blkfinserial.c - * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs. - * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com> - * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com> - * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com> - * - * Based on code from 68328 version serial driver imlpementation which was: - * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <asm/system.h> -#include <asm/bitops.h> -#include <asm/delay.h> -#include <asm/io.h> -#include "serial.h" -#include <asm/mach-common/bits/uart.h> - -DECLARE_GLOBAL_DATA_PTR; - -unsigned long pll_div_fact; - -void calc_baud(void) -{ - unsigned char i; - int temp; - u_long sclk = get_sclk(); - - for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { - temp = sclk / (baud_table[i] * 8); - if ((temp & 0x1) == 1) { - temp++; - } - temp = temp / 2; - hw_baud_table[i].dl_high = (temp >> 8) & 0xFF; - hw_baud_table[i].dl_low = (temp) & 0xFF; - } -} - -void serial_setbrg(void) -{ - int i; - - calc_baud(); - - for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { - if (gd->baudrate == baud_table[i]) - break; - } - - /* Enable UART */ - *pUART0_GCTL |= UCEN; - SSYNC(); - - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH; - SSYNC(); - - *pUART0_DLL = hw_baud_table[i].dl_low; - SSYNC(); - *pUART0_DLH = hw_baud_table[i].dl_high; - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER; - SSYNC(); - - /* Enable ERBFI and ELSI interrupts - * to poll SIC_ISR register*/ - *pUART0_IER = ELSI | ERBFI | ETBEI; - SSYNC(); - - /* Set LCR to Word Lengh 8-bit word select */ - *pUART0_LCR = WLS_8; - SSYNC(); - - return; -} - -int serial_init(void) -{ - serial_setbrg(); - return (0); -} - -void serial_putc(const char c) -{ - if ((*pUART0_LSR) & TEMT) { - if (c == '\n') - serial_putc('\r'); - - local_put_char(c); - } - - while (!((*pUART0_LSR) & TEMT)) - SYNC_ALL; - - return; -} - -int serial_tstc(void) -{ - if (*pUART0_LSR & DR) - return 1; - else - return 0; -} - -int serial_getc(void) -{ - unsigned short uart_lsr_val, uart_rbr_val; - unsigned long isr_val; - int ret; - - /* Poll for RX Interrupt */ - while (!serial_tstc()) - continue; - asm("csync;"); - - uart_lsr_val = *pUART0_LSR; /* Clear status bit */ - uart_rbr_val = *pUART0_RBR; /* getc() */ - - if (uart_lsr_val & (OE|PE|FE|BI)) { - ret = -1; - } else { - ret = uart_rbr_val & 0xff; - } - - return ret; -} - -void serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - -static void local_put_char(char ch) -{ - int flags = 0; - unsigned long isr_val; - - /* Poll for TX Interruput */ - while (!(*pUART0_LSR & THRE)) - continue; - asm("csync;"); - - *pUART0_THR = ch; /* putc() */ - - return; -} diff --git a/cpu/bf537/serial.h b/cpu/bf537/serial.h deleted file mode 100644 index e4e0b9a..0000000 --- a/cpu/bf537/serial.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * U-boot - bf537_serial.h Serial Driver defines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. - * Copyright (C) 2003 Bas Vermeulen <bas@buyways.nl> - * BuyWays B.V. (www.buyways.nl) - * - * Based heavily on: - * blkfinserial.h: Definitions for the BlackFin DSP serial driver. - * - * Copyright (C) 2001 Tony Z. Kou tonyko@arcturusnetworks.com - * Copyright (C) 2001 Arcturus Networks Inc. <www.arcturusnetworks.com> - * - * Based on code from 68328serial.c which was: - * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _Bf537_SERIAL_H -#define _Bf537_SERIAL_H - -#include <linux/config.h> -#include <asm/blackfin.h> - -#define SYNC_ALL __asm__ __volatile__ ("ssync;\n") -#define ACCESS_LATCH *pUART0_LCR |= DLAB; -#define ACCESS_PORT_IER *pUART0_LCR &= (~DLAB); - -void serial_setbrg(void); -static void local_put_char(char ch); -void calc_baud(void); -void serial_setbrg(void); -int serial_init(void); -void serial_putc(const char c); -int serial_tstc(void); -int serial_getc(void); -void serial_puts(const char *s); -static void local_put_char(char ch); - -int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 }; - -struct { - unsigned char dl_high; - unsigned char dl_low; -} hw_baud_table[5]; - -#ifdef CONFIG_STAMP -extern unsigned long pll_div_fact; -#endif - -#endif diff --git a/cpu/bf537/start.S b/cpu/bf537/start.S deleted file mode 100644 index a48f3c6..0000000 --- a/cpu/bf537/start.S +++ /dev/null @@ -1,576 +0,0 @@ -/* - * U-boot - start.S Startup file of u-boot for BF537 - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on head.S - * Copyright (c) 2003 Metrowerks/Motorola - * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * (c) 1995, Dionne & Associates - * (c) 1995, DKG Display Tech. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* - * Note: A change in this file subsequently requires a change in - * board/$(board_name)/config.mk for a valid u-boot.bin - */ - -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> - -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/dma.h> -#include <asm/mach-common/bits/pll.h> - -.global _stext; -.global __bss_start; -.global start; -.global _start; -.global edata; -.global _exit; -.global init_sdram; -.global _icache_enable; -.global _dcache_enable; -#if defined(CONFIG_BF537)&&defined(CONFIG_POST) -.global _memory_post_test; -.global _post_flag; -#endif - -#if (BFIN_BOOT_MODE == BF537_UART_BOOT) -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif -#endif - -.text -_start: -start: -_stext: - - R0 = 0x32; - SYSCFG = R0; - SSYNC; - - /* As per HW reference manual DAG registers, - * DATA and Address resgister shall be zero'd - * in initialization, after a reset state - */ - r1 = 0; /* Data registers zero'd */ - r2 = 0; - r3 = 0; - r4 = 0; - r5 = 0; - r6 = 0; - r7 = 0; - - p0 = 0; /* Address registers zero'd */ - p1 = 0; - p2 = 0; - p3 = 0; - p4 = 0; - p5 = 0; - - i0 = 0; /* DAG Registers zero'd */ - i1 = 0; - i2 = 0; - i3 = 0; - m0 = 0; - m1 = 0; - m3 = 0; - m3 = 0; - l0 = 0; - l1 = 0; - l2 = 0; - l3 = 0; - b0 = 0; - b1 = 0; - b2 = 0; - b3 = 0; - - /* Set loop counters to zero, to make sure that - * hw loops are disabled. - */ - r0 = 0; - lc0 = r0; - lc1 = r0; - - SSYNC; - - /* Check soft reset status */ - p0.h = SWRST >> 16; - p0.l = SWRST & 0xFFFF; - r0.l = w[p0]; - - cc = bittst(r0, 15); - if !cc jump no_soft_reset; - - /* Clear Soft reset */ - r0 = 0x0000; - w[p0] = r0; - ssync; - -no_soft_reset: - nop; - - /* Clear EVT registers */ - p0.h = (EVT0 >> 16); - p0.l = (EVT0 & 0xFFFF); - p0 += 8; - p1 = 14; - r1 = 0; - LSETUP(4,4) lc0 = p1; - [ p0 ++ ] = r1; - -#if (BFIN_BOOT_MODE != BF537_SPI_MASTER_BOOT) - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = 0x1; - w[p0] = r0.l; - SSYNC; -#endif - -#if (BFIN_BOOT_MODE == BF537_UART_BOOT) - - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = 0x1; - w[p0] = r0.l; - SSYNC; - - /* - * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable - */ - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - /* - * Put SDRAM in self-refresh, incase anything is running - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - /* - * Set PLL_CTL with the value that we calculate in R0 - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -check_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump check_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; -#endif - - /* - * We now are running at speed, time to set the Async mem bank wait states - * This will speed up execution, since we are normally running from FLASH. - * we need to read MAC address from FLASH - */ - p2.h = (EBIU_AMBCTL1 >> 16); - p2.l = (EBIU_AMBCTL1 & 0xFFFF); - r0.h = (AMBCTL1VAL >> 16); - r0.l = (AMBCTL1VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMBCTL0 >> 16); - p2.l = (EBIU_AMBCTL0 & 0xFFFF); - r0.h = (AMBCTL0VAL >> 16); - r0.l = (AMBCTL0VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMGCTL >> 16); - p2.l = (EBIU_AMGCTL & 0xffff); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - -#if ((BFIN_BOOT_MODE != BF537_SPI_MASTER_BOOT) && (BFIN_BOOT_MODE != BF537_UART_BOOT)) - sp.l = (0xffb01000 & 0xFFFF); - sp.h = (0xffb01000 >> 16); - - call init_sdram; -#endif - - -#if defined(CONFIG_BF537)&&defined(CONFIG_POST) - /* DMA POST code to Hi of L1 SRAM */ -postcopy: - /* P1 Points to the beginning of SYSTEM MMR Space */ - P1.H = hi(SYSMMR_BASE); - P1.L = lo(SYSMMR_BASE); - - R0.H = _text_l1; - R0.L = _text_l1; - R1.H = _etext_l1; - R1.L = _etext_l1; - R2 = R1 - R0; /* Count */ - R0.H = _etext; - R0.L = _etext; - R1.H = (CFG_MONITOR_BASE >> 16); - R1.L = (CFG_MONITOR_BASE & 0xFFFF); - R0 = R0 - R1; - R1.H = (CFG_FLASH_BASE >> 16); - R1.L = (CFG_FLASH_BASE & 0xFFFF); - R0 = R0 + R1; /* Source Address */ - R1.H = hi(L1_INST_SRAM); /* Destination Address (high) */ - R1.L = lo(L1_INST_SRAM); /* Destination Address (low) */ - R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ - /* Destination DMAConfig Value (8-bit words) */ - R4.L = (DI_EN | WNR | DMAEN); - - R6 = 0x1 (Z); - W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ - W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ - - [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ - W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ - /* Set Source DMAConfig = DMA Enable, - Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ - W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; - - [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ - W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ - /* Set Destination DMAConfig = DMA Enable, - Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ - W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; - -POST_DMA_DONE: - p0.h = hi(MDMA_D0_IRQ_STATUS); - p0.l = lo(MDMA_D0_IRQ_STATUS); - R0 = W[P0](Z); - CC = BITTST(R0, 0); - if ! CC jump POST_DMA_DONE - - R0 = 0x1; - W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ - - /* DMA POST data to Hi of L1 SRAM */ - R0.H = _rodata_l1; - R0.L = _rodata_l1; - R1.H = _erodata_l1; - R1.L = _erodata_l1; - R2 = R1 - R0; /* Count */ - R0.H = _erodata; - R0.L = _erodata; - R1.H = (CFG_MONITOR_BASE >> 16); - R1.L = (CFG_MONITOR_BASE & 0xFFFF); - R0 = R0 - R1; - R1.H = (CFG_FLASH_BASE >> 16); - R1.L = (CFG_FLASH_BASE & 0xFFFF); - R0 = R0 + R1; /* Source Address */ - R1.H = hi(DATA_BANKB_SRAM); /* Destination Address (high) */ - R1.L = lo(DATA_BANKB_SRAM); /* Destination Address (low) */ - R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ - R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ - - R6 = 0x1 (Z); - W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ - W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ - - [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ - W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ - /* Set Source DMAConfig = DMA Enable, - Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ - W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; - - [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ - W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ - /* Set Destination DMAConfig = DMA Enable, - Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ - W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; - -POST_DATA_DMA_DONE: - p0.h = hi(MDMA_D0_IRQ_STATUS); - p0.l = lo(MDMA_D0_IRQ_STATUS); - R0 = W[P0](Z); - CC = BITTST(R0, 0); - if ! CC jump POST_DATA_DMA_DONE - - R0 = 0x1; - W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ - - p0.l = _memory_post_test; - p0.h = _memory_post_test; - r0 = 0x0; - call (p0); - r7 = r0; /* save return value */ - - call init_sdram; -#endif - - /* relocate into to RAM */ - call get_pc; -offset: - r2.l = offset; - r2.h = offset; - r3.l = start; - r3.h = start; - r1 = r2 - r3; - - r0 = r0 - r1; - p1 = r0; - - p2.l = (CFG_MONITOR_BASE & 0xffff); - p2.h = (CFG_MONITOR_BASE >> 16); - - p3 = 0x04; - p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff); - p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16); -loop1: - r1 = [p1 ++ p3]; - [p2 ++ p3] = r1; - cc=p2==p4; - if !cc jump loop1; - /* - * configure STACK - */ - r0.h = (CONFIG_STACKBASE >> 16); - r0.l = (CONFIG_STACKBASE & 0xFFFF); - sp = r0; - fp = sp; - - /* - * This next section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* To keep ourselves in the supervisor mode */ - p0.l = (EVT15 & 0xFFFF); - p0.h = (EVT15 >> 16); - - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - - p0.l = (IMASK & 0xFFFF); - p0.h = (IMASK >> 16); - r0.l = LO(EVT_IVG15); - r0.h = HI(EVT_IVG15); - [p0] = r0; - raise 15; - p0.l = WAIT_HERE; - p0.h = WAIT_HERE; - reti = p0; - rti; - -WAIT_HERE: - jump WAIT_HERE; - -.global _real_start; -_real_start: - [ -- sp ] = reti; - -#ifdef CONFIG_BF537 -/* Initialise General-Purpose I/O Modules on BF537 - * Rev 0.0 Anomaly 05000212 - PORTx_FER, - * PORT_MUX Registers Do Not accept "writes" correctly - */ - p0.h = hi(PORTF_FER); - p0.l = lo(PORTF_FER); - R0.L = W[P0]; /* Read */ - nop; - nop; - nop; - ssync; - R0 = 0x000F(Z); - W[P0] = R0.L; /* Write */ - nop; - nop; - nop; - ssync; - W[P0] = R0.L; /* Enable peripheral function of PORTF for UART0 and UART1 */ - nop; - nop; - nop; - ssync; - - p0.h = hi(PORTH_FER); - p0.l = lo(PORTH_FER); - R0.L = W[P0]; /* Read */ - nop; - nop; - nop; - ssync; - R0 = 0xFFFF(Z); - W[P0] = R0.L; /* Write */ - nop; - nop; - nop; - ssync; - W[P0] = R0.L; /* Enable peripheral function of PORTH for MAC */ - nop; - nop; - nop; - ssync; - -#endif - - /* DMA reset code to Hi of L1 SRAM */ -copy: - P1.H = hi(SYSMMR_BASE); /* P1 Points to the beginning of SYSTEM MMR Space */ - P1.L = lo(SYSMMR_BASE); - - R0.H = reset_start; /* Source Address (high) */ - R0.L = reset_start; /* Source Address (low) */ - R1.H = reset_end; - R1.L = reset_end; - R2 = R1 - R0; /* Count */ - R1.H = hi(L1_INST_SRAM); /* Destination Address (high) */ - R1.L = lo(L1_INST_SRAM); /* Destination Address (low) */ - R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ - R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ - -DMA: - R6 = 0x1 (Z); - W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ - W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ - - [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ - W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ - /* Set Source DMAConfig = DMA Enable, - Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ - W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; - - [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ - W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ - /* Set Destination DMAConfig = DMA Enable, - Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ - W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; - -WAIT_DMA_DONE: - p0.h = hi(MDMA_D0_IRQ_STATUS); - p0.l = lo(MDMA_D0_IRQ_STATUS); - R0 = W[P0](Z); - CC = BITTST(R0, 0); - if ! CC jump WAIT_DMA_DONE - - R0 = 0x1; - W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ - - /* Initialize BSS Section with 0 s */ - p1.l = __bss_start; - p1.h = __bss_start; - p2.l = _end; - p2.h = _end; - r1 = p1; - r2 = p2; - r3 = r2 - r1; - r3 = r3 >> 2; - p3 = r3; - lsetup (_clear_bss, _clear_bss_end ) lc1 = p3; - CC = p2<=p1; - if CC jump _clear_bss_skip; - r0 = 0; -_clear_bss: -_clear_bss_end: - [p1++] = r0; -_clear_bss_skip: - -#if defined(CONFIG_BF537)&&defined(CONFIG_POST) - p0.l = _post_flag; - p0.h = _post_flag; - r0 = r7; - [p0] = r0; -#endif - - p0.l = _start1; - p0.h = _start1; - jump (p0); - -reset_start: - p0.h = WDOG_CNT >> 16; - p0.l = WDOG_CNT & 0xffff; - r0 = 0x0010; - w[p0] = r0; - p0.h = WDOG_CTL >> 16; - p0.l = WDOG_CTL & 0xffff; - r0 = 0x0000; - w[p0] = r0; -reset_wait: - jump reset_wait; - -reset_end: - nop; - -_exit: - jump.s _exit; -get_pc: - r0 = rets; - rts; diff --git a/cpu/bf537/traps.c b/cpu/bf537/traps.c deleted file mode 100644 index 51de322..0000000 --- a/cpu/bf537/traps.c +++ /dev/null @@ -1,239 +0,0 @@ -/* - * U-boot - traps.c Routines related to interrupts and exceptions - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * No original Copyright holder listed, - * Probabily original (C) Roman Zippel (assigned DJD, 1999) - * - * Copyright 2003 Metrowerks - for Blackfin - * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca> - * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <linux/types.h> -#include <asm/errno.h> -#include <asm/system.h> -#include <asm/traps.h> -#include "cpu.h" -#include <asm/cplb.h> -#include <asm/io.h> -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/mpu.h> - -void init_IRQ(void) -{ - blackfin_init_IRQ(); - return; -} - -void process_int(unsigned long vec, struct pt_regs *fp) -{ - printf("interrupt\n"); - return; -} - -extern unsigned int icplb_table[page_descriptor_table_size][2]; -extern unsigned int dcplb_table[page_descriptor_table_size][2]; - -unsigned long last_cplb_fault_retx; - -static unsigned int cplb_sizes[4] = - { 1024, 4 * 1024, 1024 * 1024, 4 * 1024 * 1024 }; - -void trap_c(struct pt_regs *regs) -{ - unsigned int addr; - unsigned long trapnr = (regs->seqstat) & EXCAUSE; - unsigned int i, j, size, *I0, *I1; - unsigned short data = 0; - - switch (trapnr) { - /* 0x26 - Data CPLB Miss */ - case VEC_CPLB_M: - -#if ANOMALY_05000261 - /* - * Work around an anomaly: if we see a new DCPLB fault, - * return without doing anything. Then, - * if we get the same fault again, handle it. - */ - addr = last_cplb_fault_retx; - last_cplb_fault_retx = regs->retx; - printf("this time, curr = 0x%08x last = 0x%08x\n", - addr, last_cplb_fault_retx); - if (addr != last_cplb_fault_retx) - goto trap_c_return; -#endif - data = 1; - - case VEC_CPLB_I_M: - - if (data) { - addr = *pDCPLB_FAULT_ADDR; - } else { - addr = *pICPLB_FAULT_ADDR; - } - for (i = 0; i < page_descriptor_table_size; i++) { - if (data) { - size = cplb_sizes[dcplb_table[i][1] >> 16]; - j = dcplb_table[i][0]; - } else { - size = cplb_sizes[icplb_table[i][1] >> 16]; - j = icplb_table[i][0]; - } - if ((j <= addr) && ((j + size) > addr)) { - debug("found %i 0x%08x\n", i, j); - break; - } - } - if (i == page_descriptor_table_size) { - printf("something is really wrong\n"); - do_reset(NULL, 0, 0, NULL); - } - - /* Turn the cache off */ - if (data) { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL &= - ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - SSYNC(); - } else { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); - SSYNC(); - } - - if (data) { - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - } else { - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - } - - j = 0; - while (*I1 & CPLB_LOCK) { - debug("skipping %i %08p - %08x\n", j, I1, *I1); - *I0++; - *I1++; - j++; - } - - debug("remove %i 0x%08x 0x%08x\n", j, *I0, *I1); - - for (; j < 15; j++) { - debug("replace %i 0x%08x 0x%08x\n", j, I0, I0 + 1); - *I0++ = *(I0 + 1); - *I1++ = *(I1 + 1); - } - - if (data) { - *I0 = dcplb_table[i][0]; - *I1 = dcplb_table[i][1]; - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - } else { - *I0 = icplb_table[i][0]; - *I1 = icplb_table[i][1]; - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - } - - for (j = 0; j < 16; j++) { - debug("%i 0x%08x 0x%08x\n", j, *I0++, *I1++); - } - - /* Turn the cache back on */ - if (data) { - j = *(unsigned int *)DMEM_CONTROL; - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL = - ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | j; - SSYNC(); - } else { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; - SSYNC(); - } - - break; - default: - /* All traps come here */ - printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); - printf("stack frame=0x%x, ", (unsigned int)regs); - printf("bad PC=0x%04x\n", (unsigned int)regs->pc); - dump(regs); - printf("\n\n"); - - printf("Unhandled IRQ or exceptions!\n"); - printf("Please reset the board \n"); - do_reset(NULL, 0, 0, NULL); - } - -trap_c_return: - return; - -} - -void dump(struct pt_regs *fp) -{ - debug("RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n", - fp->rete, fp->retn, fp->retx, fp->rets); - debug("IPEND: %04lx SYSCFG: %04lx\n", fp->ipend, fp->syscfg); - debug("SEQSTAT: %08lx SP: %08lx\n", (long)fp->seqstat, (long)fp); - debug("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", - fp->r0, fp->r1, fp->r2, fp->r3); - debug("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", - fp->r4, fp->r5, fp->r6, fp->r7); - debug("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", - fp->p0, fp->p1, fp->p2, fp->p3); - debug("P4: %08lx P5: %08lx FP: %08lx\n", - fp->p4, fp->p5, fp->fp); - debug("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", - fp->a0w, fp->a0x, fp->a1w, fp->a1x); - - debug("LB0: %08lx LT0: %08lx LC0: %08lx\n", - fp->lb0, fp->lt0, fp->lc0); - debug("LB1: %08lx LT1: %08lx LC1: %08lx\n", - fp->lb1, fp->lt1, fp->lc1); - debug("B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n", - fp->b0, fp->l0, fp->m0, fp->i0); - debug("B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n", - fp->b1, fp->l1, fp->m1, fp->i1); - debug("B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n", - fp->b2, fp->l2, fp->m2, fp->i2); - debug("B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n", - fp->b3, fp->l3, fp->m3, fp->i3); - - debug("DCPLB_FAULT_ADDR=%p\n", *pDCPLB_FAULT_ADDR); - debug("ICPLB_FAULT_ADDR=%p\n", *pICPLB_FAULT_ADDR); - -} diff --git a/cpu/bf537/video.c b/cpu/bf537/video.c deleted file mode 100644 index 3ff0151..0000000 --- a/cpu/bf537/video.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * (C) Copyright 2000 - * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it - * (C) Copyright 2002 - * Wolfgang Denk, wd@denx.de - * (C) Copyright 2006 - * Aubrey Li, aubrey.li@analog.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <stdarg.h> -#include <common.h> -#include <config.h> -#include <asm/blackfin.h> -#include <i2c.h> -#include <linux/types.h> -#include <devices.h> - -#ifdef CONFIG_VIDEO -#define NTSC_FRAME_ADDR 0x06000000 -#include "video.h" - -/* NTSC OUTPUT SIZE 720 * 240 */ -#define VERTICAL 2 -#define HORIZONTAL 4 - -int is_vblank_line(const int line) -{ - /* - * This array contains a single bit for each line in - * an NTSC frame. - */ - if ((line <= 18) || (line >= 264 && line <= 281) || (line == 528)) - return true; - - return false; -} - -int NTSC_framebuffer_init(char *base_address) -{ - const int NTSC_frames = 1; - const int NTSC_lines = 525; - char *dest = base_address; - int frame_num, line_num; - - for (frame_num = 0; frame_num < NTSC_frames; ++frame_num) { - for (line_num = 1; line_num <= NTSC_lines; ++line_num) { - unsigned int code; - int offset = 0; - int i; - - if (is_vblank_line(line_num)) - offset++; - - if (line_num > 266 || line_num < 3) - offset += 2; - - /* Output EAV code */ - code = SystemCodeMap[offset].EAV; - write_dest_byte((char)(code >> 24) & 0xff); - write_dest_byte((char)(code >> 16) & 0xff); - write_dest_byte((char)(code >> 8) & 0xff); - write_dest_byte((char)(code) & 0xff); - - /* Output horizontal blanking */ - for (i = 0; i < 67 * 2; ++i) { - write_dest_byte(0x80); - write_dest_byte(0x10); - } - - /* Output SAV */ - code = SystemCodeMap[offset].SAV; - write_dest_byte((char)(code >> 24) & 0xff); - write_dest_byte((char)(code >> 16) & 0xff); - write_dest_byte((char)(code >> 8) & 0xff); - write_dest_byte((char)(code) & 0xff); - - /* Output empty horizontal data */ - for (i = 0; i < 360 * 2; ++i) { - write_dest_byte(0x80); - write_dest_byte(0x10); - } - } - } - - return dest - base_address; -} - -void fill_frame(char *Frame, int Value) -{ - int *OddPtr32; - int OddLine; - int *EvenPtr32; - int EvenLine; - int i; - int *data; - int m, n; - - /* fill odd and even frames */ - for (OddLine = 22, EvenLine = 285; OddLine < 263; OddLine++, EvenLine++) { - OddPtr32 = (int *)((Frame + (OddLine * 1716)) + 276); - EvenPtr32 = (int *)((Frame + (EvenLine * 1716)) + 276); - for (i = 0; i < 360; i++, OddPtr32++, EvenPtr32++) { - *OddPtr32 = Value; - *EvenPtr32 = Value; - } - } - - for (m = 0; m < VERTICAL; m++) { - data = (int *)u_boot_logo.data; - for (OddLine = (22 + m), EvenLine = (285 + m); - OddLine < (u_boot_logo.height * VERTICAL) + (22 + m); - OddLine += VERTICAL, EvenLine += VERTICAL) { - OddPtr32 = (int *)((Frame + ((OddLine) * 1716)) + 276); - EvenPtr32 = - (int *)((Frame + ((EvenLine) * 1716)) + 276); - for (i = 0; i < u_boot_logo.width / 2; i++) { - /* enlarge one pixel to m x n */ - for (n = 0; n < HORIZONTAL; n++) { - *OddPtr32++ = *data; - *EvenPtr32++ = *data; - } - data++; - } - } - } -} - -void video_putc(const char c) -{ -} - -void video_puts(const char *s) -{ -} - -static int video_init(void) -{ - char *NTSCFrame; - NTSCFrame = (char *)NTSC_FRAME_ADDR; - NTSC_framebuffer_init(NTSCFrame); - fill_frame(NTSCFrame, BLUE); - - *pPPI_CONTROL = 0x0082; - *pPPI_FRAME = 0x020D; - - *pDMA0_START_ADDR = NTSCFrame; - *pDMA0_X_COUNT = 0x035A; - *pDMA0_X_MODIFY = 0x0002; - *pDMA0_Y_COUNT = 0x020D; - *pDMA0_Y_MODIFY = 0x0002; - *pDMA0_CONFIG = 0x1015; - *pPPI_CONTROL = 0x0083; - return 0; -} - -int drv_video_init(void) -{ - int error, devices = 1; - - device_t videodev; - - video_init(); /* Video initialization */ - - memset(&videodev, 0, sizeof(videodev)); - - strcpy(videodev.name, "video"); - videodev.ext = DEV_EXT_VIDEO; /* Video extensions */ - videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */ - videodev.putc = video_putc; /* 'putc' function */ - videodev.puts = video_puts; /* 'puts' function */ - - error = device_register(&videodev); - - return (error == 0) ? devices : error; -} -#endif diff --git a/cpu/bf537/video.h b/cpu/bf537/video.h deleted file mode 100644 index a43553f..0000000 --- a/cpu/bf537/video.h +++ /dev/null @@ -1,25 +0,0 @@ -#include <video_logo.h> -#define write_dest_byte(val) {*dest++=val;} -#define BLACK (0x01800180) /* black pixel pattern */ -#define BLUE (0x296E29F0) /* blue pixel pattern */ -#define RED (0x51F0515A) /* red pixel pattern */ -#define MAGENTA (0x6ADE6ACA) /* magenta pixel pattern*/ -#define GREEN (0x91229136) /* green pixel pattern */ -#define CYAN (0xAA10AAA6) /* cyan pixel pattern */ -#define YELLOW (0xD292D210) /* yellow pixel pattern */ -#define WHITE (0xFE80FE80) /* white pixel pattern */ - -#define true 1 -#define false 0 - -typedef struct { - unsigned int SAV; - unsigned int EAV; -} SystemCodeType; - -const SystemCodeType SystemCodeMap[4] = { - {0xFF000080, 0xFF00009D}, - {0xFF0000AB, 0xFF0000B6}, - {0xFF0000C7, 0xFF0000DA}, - {0xFF0000EC, 0xFF0000F1} -}; diff --git a/cpu/bf561/cache.S b/cpu/bf561/cache.S deleted file mode 100644 index d9015c6..0000000 --- a/cpu/bf561/cache.S +++ /dev/null @@ -1,129 +0,0 @@ -#define ASSEMBLY -#include <asm/linkage.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mach-common/bits/mpu.h> - -.text -.align 2 -ENTRY(_blackfin_icache_flush_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; - 1: - IFLUSH[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - IFLUSH[P0]; - SSYNC; - RTS; - -ENTRY(_blackfin_dcache_flush_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; -1: - FLUSH[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - FLUSH[P0]; - SSYNC; - RTS; - -ENTRY(_icache_invalidate) -ENTRY(_invalidate_entire_icache) - [--SP] = (R7:5); - - P0.L = (IMEM_CONTROL & 0xFFFF); - P0.H = (IMEM_CONTROL >> 16); - R7 =[P0]; - - /* - * Clear the IMC bit , All valid bits in the instruction - * cache are set to the invalid state - */ - BITCLR(R7, IMC_P); - CLI R6; - /* SSYNC required before invalidating cache. */ - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - /* Configures the instruction cache agian */ - R6 = (IMC | ENICPLB); - R7 = R7 | R6; - - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - (R7:5) =[SP++]; - RTS; - -/* - * Invalidate the Entire Data cache by - * clearing DMC[1:0] bits - */ -ENTRY(_invalidate_entire_dcache) -ENTRY(_dcache_invalidate) - [--SP] = (R7:6); - - P0.L = (DMEM_CONTROL & 0xFFFF); - P0.H = (DMEM_CONTROL >> 16); - R7 =[P0]; - - /* - * Clear the DMC[1:0] bits, All valid bits in the data - * cache are set to the invalid state - */ - BITCLR(R7, DMC0_P); - BITCLR(R7, DMC1_P); - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - /* Configures the data cache again */ - - R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - R7 = R7 | R6; - - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - (R7:6) =[SP++]; - RTS; - -ENTRY(_blackfin_dcache_invalidate_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; -1: - FLUSHINV[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - - /* - * If the data crosses a cache line, then we'll be pointing to - * the last cache line, but won't have flushed/invalidated it yet, so do - * one more. - */ - FLUSHINV[P0]; - SSYNC; - RTS; diff --git a/cpu/bf561/cpu.c b/cpu/bf561/cpu.c deleted file mode 100644 index e0dd2f5..0000000 --- a/cpu/bf561/cpu.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * U-boot - cpu.c CPU specific functions - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <asm/blackfin.h> -#include <command.h> -#include <asm/entry.h> -#include <asm/cplb.h> -#include <asm/io.h> - -#define CACHE_ON 1 -#define CACHE_OFF 0 - -extern unsigned int icplb_table[page_descriptor_table_size][2]; -extern unsigned int dcplb_table[page_descriptor_table_size][2]; - -int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) -{ - __asm__ __volatile__("cli r3;" "P0 = %0;" "JUMP (P0);"::"r"(L1_INST_SRAM) - ); - - return 0; -} - -/* These functions are just used to satisfy the linker */ -int cpu_init(void) -{ - return 0; -} - -int cleanup_before_linux(void) -{ - return 0; -} - -void icache_enable(void) -{ - unsigned int *I0, *I1; - int i, j = 0; - - /* Before enable icache, disable it first */ - icache_disable(); - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - - /* make sure the locked ones go in first */ - for (i = 0; i < page_descriptor_table_size; i++) { - if (CPLB_LOCK & icplb_table[i][1]) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - icplb_table[i][0], icplb_table[i][1]); - *I0++ = icplb_table[i][0]; - *I1++ = icplb_table[i][1]; - j++; - } - } - - for (i = 0; i < page_descriptor_table_size; i++) { - if (!(CPLB_LOCK & icplb_table[i][1])) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - icplb_table[i][0], icplb_table[i][1]); - *I0++ = icplb_table[i][0]; - *I1++ = icplb_table[i][1]; - j++; - if (j == 16) { - break; - } - } - } - - /* Fill the rest with invalid entry */ - if (j <= 15) { - for (; j < 16; j++) { - debug("filling %i with 0", j); - *I1++ = 0x0; - } - - } - - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; - SSYNC(); -} - -void icache_disable(void) -{ - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); - SSYNC(); -} - -int icache_status(void) -{ - unsigned int value; - value = *(unsigned int *)IMEM_CONTROL; - - if (value & (IMC | ENICPLB)) - return CACHE_ON; - else - return CACHE_OFF; -} - -void dcache_enable(void) -{ - unsigned int *I0, *I1; - unsigned int temp; - int i, j = 0; - - /* Before enable dcache, disable it first */ - dcache_disable(); - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - - /* make sure the locked ones go in first */ - for (i = 0; i < page_descriptor_table_size; i++) { - if (CPLB_LOCK & dcplb_table[i][1]) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - *I0++ = dcplb_table[i][0]; - *I1++ = dcplb_table[i][1]; - j++; - } else { - debug("skip %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - } - } - - for (i = 0; i < page_descriptor_table_size; i++) { - if (!(CPLB_LOCK & dcplb_table[i][1])) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - *I0++ = dcplb_table[i][0]; - *I1++ = dcplb_table[i][1]; - j++; - if (j == 16) { - break; - } - } - } - - /* Fill the rest with invalid entry */ - if (j <= 15) { - for (; j < 16; j++) { - debug("filling %i with 0", j); - *I1++ = 0x0; - } - } - - temp = *(unsigned int *)DMEM_CONTROL; - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL = - ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | temp; - SSYNC(); -} - -void dcache_disable(void) -{ - - unsigned int *I0, *I1; - int i; - - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL &= - ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - SSYNC(); - - /* after disable dcache, clear it so we don't confuse the next application */ - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - - for (i = 0; i < 16; i++) { - *I0++ = 0x0; - *I1++ = 0x0; - } -} - -int dcache_status(void) -{ - unsigned int value; - value = *(unsigned int *)DMEM_CONTROL; - if (value & (ENDCPLB)) - return CACHE_ON; - else - return CACHE_OFF; -} diff --git a/cpu/bf561/cpu.h b/cpu/bf561/cpu.h deleted file mode 100644 index b6b73b1..0000000 --- a/cpu/bf561/cpu.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * U-boot - cpu.h - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _CPU_H_ -#define _CPU_H_ - -#include <command.h> - -#define INTERNAL_IRQS (32) -#define NUM_IRQ_NODES 16 -#define DEF_INTERRUPT_FLAGS 1 -#define MAX_TIM_LOAD 0xFFFFFFFF - -void blackfin_irq_panic(int reason, struct pt_regs *reg); -extern void dump(struct pt_regs *regs); -void display_excp(void); -asmlinkage void evt_nmi(void); -asmlinkage void evt_exception(void); -asmlinkage void trap(void); -asmlinkage void evt_ivhw(void); -asmlinkage void evt_rst(void); -asmlinkage void evt_timer(void); -asmlinkage void evt_evt7(void); -asmlinkage void evt_evt8(void); -asmlinkage void evt_evt9(void); -asmlinkage void evt_evt10(void); -asmlinkage void evt_evt11(void); -asmlinkage void evt_evt12(void); -asmlinkage void evt_evt13(void); -asmlinkage void evt_soft_int1(void); -asmlinkage void evt_system_call(void); -void blackfin_irq_panic(int reason, struct pt_regs *regs); -void blackfin_free_irq(unsigned int irq, void *dev_id); -void call_isr(int irq, struct pt_regs *fp); -void blackfin_do_irq(int vec, struct pt_regs *fp); -void blackfin_init_IRQ(void); -void blackfin_enable_irq(unsigned int irq); -void blackfin_disable_irq(unsigned int irq); -extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); -int blackfin_request_irq(unsigned int irq, - void (*handler) (int, void *, struct pt_regs *), - unsigned long flags, const char *devname, - void *dev_id); -void timer_init(void); -#endif diff --git a/cpu/bf561/flush.S b/cpu/bf561/flush.S deleted file mode 100644 index 0140a60..0000000 --- a/cpu/bf561/flush.S +++ /dev/null @@ -1,402 +0,0 @@ -/* Copyright (C) 2003-2007 Analog Devices Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. - */ - -#define ASSEMBLY - -#include <asm/linkage.h> -#include <asm/cplb.h> -#include <config.h> -#include <asm/blackfin.h> - -.text - -/* This is an external function being called by the user - * application through __flush_cache_all. Currently this function - * serves the purpose of flushing all the pending writes in - * in the instruction cache. - */ - -ENTRY(_flush_instruction_cache) - [--SP] = ( R7:6, P5:4 ); - LINK 12; - SP += -12; - P5.H = (ICPLB_ADDR0 >> 16); - P5.L = (ICPLB_ADDR0 & 0xFFFF); - P4.H = (ICPLB_DATA0 >> 16); - P4.L = (ICPLB_DATA0 & 0xFFFF); - R7 = CPLB_VALID | CPLB_L1_CHBL; - R6 = 16; -inext: R0 = [P5++]; - R1 = [P4++]; - [--SP] = RETS; - CALL _icplb_flush; /* R0 = page, R1 = data*/ - RETS = [SP++]; -iskip: R6 += -1; - CC = R6; - IF CC JUMP inext; - SSYNC; - SP += 12; - UNLINK; - ( R7:6, P5:4 ) = [SP++]; - RTS; - -/* This is an internal function to flush all pending - * writes in the cache associated with a particular ICPLB. - * - * R0 - page's start address - * R1 - CPLB's data field. - */ - -.align 2 -ENTRY(_icplb_flush) - [--SP] = ( R7:0, P5:0 ); - [--SP] = LC0; - [--SP] = LT0; - [--SP] = LB0; - [--SP] = LC1; - [--SP] = LT1; - [--SP] = LB1; - - /* If it's a 1K or 4K page, then it's quickest to - * just systematically flush all the addresses in - * the page, regardless of whether they're in the - * cache, or dirty. If it's a 1M or 4M page, there - * are too many addresses, and we have to search the - * cache for lines corresponding to the page. - */ - - CC = BITTST(R1, 17); /* 1MB or 4MB */ - IF !CC JUMP iflush_whole_page; - - /* We're only interested in the page's size, so extract - * this from the CPLB (bits 17:16), and scale to give an - * offset into the page_size and page_prefix tables. - */ - - R1 <<= 14; - R1 >>= 30; - R1 <<= 2; - - /* We can also determine the sub-bank used, because this is - * taken from bits 13:12 of the address. - */ - - R3 = ((12<<8)|2); /* Extraction pattern */ - nop; /*Anamoly 05000209*/ - R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ - R3.H = R4.L << 0 ; /* Save in extraction pattern for later deposit.*/ - - - /* So: - * R0 = Page start - * R1 = Page length (actually, offset into size/prefix tables) - * R3 = sub-bank deposit values - * - * The cache has 2 Ways, and 64 sets, so we iterate through - * the sets, accessing the tag for each Way, for our Bank and - * sub-bank, looking for dirty, valid tags that match our - * address prefix. - */ - - P5.L = (ITEST_COMMAND & 0xFFFF); - P5.H = (ITEST_COMMAND >> 16); - P4.L = (ITEST_DATA0 & 0xFFFF); - P4.H = (ITEST_DATA0 >> 16); - - P0.L = page_prefix_table; - P0.H = page_prefix_table; - P1 = R1; - R5 = 0; /* Set counter*/ - P0 = P1 + P0; - R4 = [P0]; /* This is the address prefix*/ - - /* We're reading (bit 1==0) the tag (bit 2==0), and we - * don't care about which double-word, since we're only - * fetching tags, so we only have to set Set, Bank, - * Sub-bank and Way. - */ - - P2 = 4; - LSETUP (ifs1, ife1) LC1 = P2; -ifs1: P0 = 32; /* iterate over all sets*/ - LSETUP (ifs0, ife0) LC0 = P0; -ifs0: R6 = R5 << 5; /* Combine set*/ - R6.H = R3.H << 0 ; /* and sub-bank*/ - [P5] = R6; /* Issue Command*/ - SSYNC; /* CSYNC will not work here :(*/ - R7 = [P4]; /* and read Tag.*/ - CC = BITTST(R7, 0); /* Check if valid*/ - IF !CC JUMP ifskip; /* and skip if not.*/ - - /* Compare against the page address. First, plant bits 13:12 - * into the tag, since those aren't part of the returned data. - */ - - R7 = DEPOSIT(R7, R3); /* set 13:12*/ - R1 = R7 & R4; /* Mask off lower bits*/ - CC = R1 == R0; /* Compare against page start.*/ - IF !CC JUMP ifskip; /* Skip it if it doesn't match.*/ - - /* Tag address matches against page, so this is an entry - * we must flush. - */ - - R7 >>= 10; /* Mask off the non-address bits*/ - R7 <<= 10; - P3 = R7; - IFLUSH [P3]; /* And flush the entry*/ -ifskip: -ife0: R5 += 1; /* Advance to next Set*/ -ife1: NOP; - -ifinished: - SSYNC; /* Ensure the data gets out to mem.*/ - - /*Finished. Restore context.*/ - LB1 = [SP++]; - LT1 = [SP++]; - LC1 = [SP++]; - LB0 = [SP++]; - LT0 = [SP++]; - LC0 = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; - -iflush_whole_page: - /* It's a 1K or 4K page, so quicker to just flush the - * entire page. - */ - - P1 = 32; /* For 1K pages*/ - P2 = P1 << 2; /* For 4K pages*/ - P0 = R0; /* Start of page*/ - CC = BITTST(R1, 16); /* Whether 1K or 4K*/ - IF CC P1 = P2; - P1 += -1; /* Unroll one iteration*/ - SSYNC; - IFLUSH [P0++]; /* because CSYNC can't end loops.*/ - LSETUP (isall, ieall) LC0 = P1; -isall:IFLUSH [P0++]; -ieall: NOP; - SSYNC; - JUMP ifinished; - -/* This is an external function being called by the user - * application through __flush_cache_all. Currently this function - * serves the purpose of flushing all the pending writes in - * in the data cache. - */ - -ENTRY(_flush_data_cache) - [--SP] = ( R7:6, P5:4 ); - LINK 12; - SP += -12; - P5.H = (DCPLB_ADDR0 >> 16); - P5.L = (DCPLB_ADDR0 & 0xFFFF); - P4.H = (DCPLB_DATA0 >> 16); - P4.L = (DCPLB_DATA0 & 0xFFFF); - R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z); - R6 = 16; -next: R0 = [P5++]; - R1 = [P4++]; - CC = BITTST(R1, 14); /* Is it write-through?*/ - IF CC JUMP skip; /* If so, ignore it.*/ - R2 = R1 & R7; /* Is it a dirty, cached page?*/ - CC = R2; - IF !CC JUMP skip; /* If not, ignore it.*/ - [--SP] = RETS; - CALL _dcplb_flush; /* R0 = page, R1 = data*/ - RETS = [SP++]; -skip: R6 += -1; - CC = R6; - IF CC JUMP next; - SSYNC; - SP += 12; - UNLINK; - ( R7:6, P5:4 ) = [SP++]; - RTS; - -/* This is an internal function to flush all pending - * writes in the cache associated with a particular DCPLB. - * - * R0 - page's start address - * R1 - CPLB's data field. - */ - -.align 2 -ENTRY(_dcplb_flush) - [--SP] = ( R7:0, P5:0 ); - [--SP] = LC0; - [--SP] = LT0; - [--SP] = LB0; - [--SP] = LC1; - [--SP] = LT1; - [--SP] = LB1; - - /* If it's a 1K or 4K page, then it's quickest to - * just systematically flush all the addresses in - * the page, regardless of whether they're in the - * cache, or dirty. If it's a 1M or 4M page, there - * are too many addresses, and we have to search the - * cache for lines corresponding to the page. - */ - - CC = BITTST(R1, 17); /* 1MB or 4MB */ - IF !CC JUMP dflush_whole_page; - - /* We're only interested in the page's size, so extract - * this from the CPLB (bits 17:16), and scale to give an - * offset into the page_size and page_prefix tables. - */ - - R1 <<= 14; - R1 >>= 30; - R1 <<= 2; - - /* The page could be mapped into Bank A or Bank B, depending - * on (a) whether both banks are configured as cache, and - * (b) on whether address bit A[x] is set. x is determined - * by DCBS in DMEM_CONTROL - */ - - R2 = 0; /* Default to Bank A (Bank B would be 1)*/ - - P0.L = (DMEM_CONTROL & 0xFFFF); - P0.H = (DMEM_CONTROL >> 16); - - R3 = [P0]; /* If Bank B is not enabled as cache*/ - CC = BITTST(R3, 2); /* then Bank A is our only option.*/ - IF CC JUMP bank_chosen; - - R4 = 1<<14; /* If DCBS==0, use A[14].*/ - R5 = R4 << 7; /* If DCBS==1, use A[23];*/ - CC = BITTST(R3, 4); - IF CC R4 = R5; /* R4 now has either bit 14 or bit 23 set.*/ - R5 = R0 & R4; /* Use it to test the Page address*/ - CC = R5; /* and if that bit is set, we use Bank B,*/ - R2 = CC; /* else we use Bank A.*/ - R2 <<= 23; /* The Bank selection's at posn 23.*/ - -bank_chosen: - - /* We can also determine the sub-bank used, because this is - * taken from bits 13:12 of the address. - */ - - R3 = ((12<<8)|2); /* Extraction pattern */ - nop; /*Anamoly 05000209*/ - R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ - /* Save in extraction pattern for later deposit.*/ - R3.H = R4.L << 0; - - /* So: - * R0 = Page start - * R1 = Page length (actually, offset into size/prefix tables) - * R2 = Bank select mask - * R3 = sub-bank deposit values - * - * The cache has 2 Ways, and 64 sets, so we iterate through - * the sets, accessing the tag for each Way, for our Bank and - * sub-bank, looking for dirty, valid tags that match our - * address prefix. - */ - - P5.L = (DTEST_COMMAND & 0xFFFF); - P5.H = (DTEST_COMMAND >> 16); - P4.L = (DTEST_DATA0 & 0xFFFF); - P4.H = (DTEST_DATA0 >> 16); - - P0.L = page_prefix_table; - P0.H = page_prefix_table; - P1 = R1; - R5 = 0; /* Set counter*/ - P0 = P1 + P0; - R4 = [P0]; /* This is the address prefix*/ - - - /* We're reading (bit 1==0) the tag (bit 2==0), and we - * don't care about which double-word, since we're only - * fetching tags, so we only have to set Set, Bank, - * Sub-bank and Way. - */ - - P2 = 2; - LSETUP (fs1, fe1) LC1 = P2; -fs1: P0 = 64; /* iterate over all sets*/ - LSETUP (fs0, fe0) LC0 = P0; -fs0: R6 = R5 << 5; /* Combine set*/ - R6.H = R3.H << 0 ; /* and sub-bank*/ - R6 = R6 | R2; /* and Bank. Leave Way==0 at first.*/ - BITSET(R6,14); - [P5] = R6; /* Issue Command*/ - SSYNC; - R7 = [P4]; /* and read Tag.*/ - CC = BITTST(R7, 0); /* Check if valid*/ - IF !CC JUMP fskip; /* and skip if not.*/ - CC = BITTST(R7, 1); /* Check if dirty*/ - IF !CC JUMP fskip; /* and skip if not.*/ - - /* Compare against the page address. First, plant bits 13:12 - * into the tag, since those aren't part of the returned data. - */ - - R7 = DEPOSIT(R7, R3); /* set 13:12*/ - R1 = R7 & R4; /* Mask off lower bits*/ - CC = R1 == R0; /* Compare against page start.*/ - IF !CC JUMP fskip; /* Skip it if it doesn't match.*/ - - /* Tag address matches against page, so this is an entry - * we must flush. - */ - - R7 >>= 10; /* Mask off the non-address bits*/ - R7 <<= 10; - P3 = R7; - SSYNC; - FLUSHINV [P3]; /* And flush the entry*/ -fskip: -fe0: R5 += 1; /* Advance to next Set*/ -fe1: BITSET(R2, 26); /* Go to next Way.*/ - -dfinished: - SSYNC; /* Ensure the data gets out to mem.*/ - - /*Finished. Restore context.*/ - LB1 = [SP++]; - LT1 = [SP++]; - LC1 = [SP++]; - LB0 = [SP++]; - LT0 = [SP++]; - LC0 = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; - -dflush_whole_page: - - /* It's a 1K or 4K page, so quicker to just flush the - * entire page. - */ - - P1 = 32; /* For 1K pages*/ - P2 = P1 << 2; /* For 4K pages*/ - P0 = R0; /* Start of page*/ - CC = BITTST(R1, 16); /* Whether 1K or 4K*/ - IF CC P1 = P2; - P1 += -1; /* Unroll one iteration*/ - SSYNC; - FLUSHINV [P0++]; /* because CSYNC can't end loops.*/ - LSETUP (eall, eall) LC0 = P1; -eall: FLUSHINV [P0++]; - SSYNC; - JUMP dfinished; - -.align 4; -page_prefix_table: -.byte4 0xFFFFFC00; /* 1K */ -.byte4 0xFFFFF000; /* 4K */ -.byte4 0xFFF00000; /* 1M */ -.byte4 0xFFC00000; /* 4M */ -.page_prefix_table.end: diff --git a/cpu/bf561/init_sdram.S b/cpu/bf561/init_sdram.S deleted file mode 100644 index f5ccf30..0000000 --- a/cpu/bf561/init_sdram.S +++ /dev/null @@ -1,175 +0,0 @@ -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mem_init.h> -#include <asm/mach-common/bits/bootrom.h> -#include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/pll.h> -#include <asm/mach-common/bits/uart.h> -.global init_sdram; - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -init_sdram: - [--SP] = ASTAT; - [--SP] = RETS; - [--SP] = (R7:0); - [--SP] = (P5:0); - - /* - * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable - */ - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - /* - * Put SDRAM in self-refresh, incase anything is running - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - /* - * Set PLL_CTL with the value that we calculate in R0 - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2? */ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -check_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump check_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; - - /* - * We now are running at speed, time to set the Async mem bank wait states - * This will speed up execution, since we are normally running from FLASH. - */ - - p2.h = (EBIU_AMBCTL1 >> 16); - p2.l = (EBIU_AMBCTL1 & 0xFFFF); - r0.h = (AMBCTL1VAL >> 16); - r0.l = (AMBCTL1VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMBCTL0 >> 16); - p2.l = (EBIU_AMBCTL0 & 0xFFFF); - r0.h = (AMBCTL0VAL >> 16); - r0.l = (AMBCTL0VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMGCTL >> 16); - p2.l = (EBIU_AMGCTL & 0xffff); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* - * Now, Initialize the SDRAM, - * start with the SDRAM Refresh Rate Control Register - */ - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Memory Bank Control Register - bank specific parameters - */ - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Global Control Register - global programmable parameters - * Disable self-refresh - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - - /* - * Check if SDRAM is already powered up, if it is, enable self-refresh - */ - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump skip; - NOP; - BITSET (R0, 23); -skip: - [P2] = R0; - SSYNC; - - /* Write in the new value in the register */ - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - [P2] = R0; - SSYNC; - nop; - - (P5:0) = [SP++]; - (R7:0) = [SP++]; - RETS = [SP++]; - ASTAT = [SP++]; - RTS; diff --git a/cpu/bf561/init_sdram_bootrom_initblock.S b/cpu/bf561/init_sdram_bootrom_initblock.S deleted file mode 100644 index 9cc5e78..0000000 --- a/cpu/bf561/init_sdram_bootrom_initblock.S +++ /dev/null @@ -1,189 +0,0 @@ -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mem_init.h> -#include <asm/mach-common/bits/bootrom.h> -#include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/pll.h> -#include <asm/mach-common/bits/uart.h> -.global init_sdram; - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -init_sdram: - [--SP] = ASTAT; - [--SP] = RETS; - [--SP] = (R7:0); - [--SP] = (P5:0); - - - p0.h = hi(SICA_IWR0); - p0.l = lo(SICA_IWR0); - r0.l = 0x1; - w[p0] = r0.l; - SSYNC; - - p0.h = hi(SPI_BAUD); - p0.l = lo(SPI_BAUD); - r0.l = CONFIG_SPI_BAUD_INITBLOCK; - w[p0] = r0.l; - SSYNC; - - /* - * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable - */ - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - /* - * Put SDRAM in self-refresh, incase anything is running - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - /* - * Set PLL_CTL with the value that we calculate in R0 - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2? */ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -check_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump check_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; - - /* - * We now are running at speed, time to set the Async mem bank wait states - * This will speed up execution, since we are normally running from FLASH. - */ - - p2.h = (EBIU_AMBCTL1 >> 16); - p2.l = (EBIU_AMBCTL1 & 0xFFFF); - r0.h = (AMBCTL1VAL >> 16); - r0.l = (AMBCTL1VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMBCTL0 >> 16); - p2.l = (EBIU_AMBCTL0 & 0xFFFF); - r0.h = (AMBCTL0VAL >> 16); - r0.l = (AMBCTL0VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMGCTL >> 16); - p2.l = (EBIU_AMGCTL & 0xffff); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* - * Now, Initialize the SDRAM, - * start with the SDRAM Refresh Rate Control Register - */ - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Memory Bank Control Register - bank specific parameters - */ - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Global Control Register - global programmable parameters - * Disable self-refresh - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - - /* - * Check if SDRAM is already powered up, if it is, enable self-refresh - */ - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump skip; - NOP; - BITSET (R0, 23); -skip: - [P2] = R0; - SSYNC; - - /* Write in the new value in the register */ - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - [P2] = R0; - SSYNC; - nop; - - - (P5:0) = [SP++]; - (R7:0) = [SP++]; - RETS = [SP++]; - ASTAT = [SP++]; - RTS; diff --git a/cpu/bf561/interrupt.S b/cpu/bf561/interrupt.S deleted file mode 100644 index a10eaab..0000000 --- a/cpu/bf561/interrupt.S +++ /dev/null @@ -1,244 +0,0 @@ -/* - * U-boot - interrupt.S Processing of interrupts and exception handling - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on interrupt.S - * - * Copyright (C) 2003 Metrowerks, Inc. <mwaddel@metrowerks.com> - * Copyright (C) 2002 Arcturus Networks Ltd. Ted Ma <mated@sympatico.ca> - * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * - * (c) 1995, Dionne & Associates - * (c) 1995, DKG Display Tech. - * - * This file is also based on exception.asm - * (C) Copyright 2001-2005 - Analog Devices, Inc. All rights reserved. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define ASSEMBLY -#include <config.h> -#include <asm/blackfin.h> -#include <asm/entry.h> - -.global _blackfin_irq_panic; - -.text -.align 2 - -#ifndef CONFIG_KGDB -.global _evt_emulation -_evt_emulation: - SAVE_CONTEXT - r0 = 0; - r1 = seqstat; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - rte; -#endif - -.global _evt_nmi -_evt_nmi: - SAVE_CONTEXT - r0 = 2; - r1 = RETN; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - -_evt_nmi_exit: - rtn; - -.global _trap -_trap: - SAVE_ALL_SYS - r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ - sp += -12; - call _trap_c - sp += 12; - RESTORE_ALL_SYS - rtx; - -.global _evt_rst -_evt_rst: - SAVE_CONTEXT - r0 = 1; - r1 = RETN; - sp += -12; - call _do_reset; - sp += 12; - -_evt_rst_exit: - rtn; - -irq_panic: - r0 = 3; - r1 = sp; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - -.global _evt_ivhw -_evt_ivhw: - SAVE_CONTEXT - RAISE 14; - -_evt_ivhw_exit: - rti; - -.global _evt_timer -_evt_timer: - SAVE_CONTEXT - r0 = 6; - sp += -12; - /* Polling method used now. */ - /* call timer_int; */ - sp += 12; - RESTORE_CONTEXT - rti; - nop; - -.global _evt_evt7 -_evt_evt7: - SAVE_CONTEXT - r0 = 7; - sp += -12; - call _process_int; - sp += 12; - -evt_evt7_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt8 -_evt_evt8: - SAVE_CONTEXT - r0 = 8; - sp += -12; - call _process_int; - sp += 12; - -evt_evt8_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt9 -_evt_evt9: - SAVE_CONTEXT - r0 = 9; - sp += -12; - call _process_int; - sp += 12; - -evt_evt9_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt10 -_evt_evt10: - SAVE_CONTEXT - r0 = 10; - sp += -12; - call _process_int; - sp += 12; - -evt_evt10_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt11 -_evt_evt11: - SAVE_CONTEXT - r0 = 11; - sp += -12; - call _process_int; - sp += 12; - -evt_evt11_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt12 -_evt_evt12: - SAVE_CONTEXT - r0 = 12; - sp += -12; - call _process_int; - sp += 12; -evt_evt12_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt13 -_evt_evt13: - SAVE_CONTEXT - r0 = 13; - sp += -12; - call _process_int; - sp += 12; - -evt_evt13_exit: - RESTORE_CONTEXT - rti; - -.global _evt_system_call -_evt_system_call: - [--sp] = r0; - [--SP] = RETI; - r0 = [sp++]; - r0 += 2; - [--sp] = r0; - RETI = [SP++]; - r0 = [SP++]; - SAVE_CONTEXT - sp += -12; - call _exception_handle; - sp += 12; - RESTORE_CONTEXT - RTI; - -evt_system_call_exit: - rti; - -.global _evt_soft_int1 -_evt_soft_int1: - [--sp] = r0; - [--SP] = RETI; - r0 = [sp++]; - r0 += 2; - [--sp] = r0; - RETI = [SP++]; - r0 = [SP++]; - SAVE_CONTEXT - sp += -12; - call _exception_handle; - sp += 12; - RESTORE_CONTEXT - RTI; - -evt_soft_int1_exit: - rti; diff --git a/cpu/bf561/ints.c b/cpu/bf561/ints.c deleted file mode 100644 index d6aa393..0000000 --- a/cpu/bf561/ints.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * U-boot - ints.c Interrupt related routines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on ints.c - * - * Apr18 2003, Changed by HuTao to support interrupt cascading for Blackfin - * drivers - * - * Copyright 1996 Roman Zippel - * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> - * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> - * Copyright 2003 Metrowerks/Motorola - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <linux/stddef.h> -#include <asm/system.h> -#include <asm/traps.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <asm/blackfin.h> -#include "cpu.h" - -void blackfin_irq_panic(int reason, struct pt_regs *regs) -{ - printf("\n\nException: IRQ 0x%x entered\n", reason); - printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); - printf("stack frame=0x%x, ", (unsigned int)regs); - printf("bad PC=0x%04x\n", (unsigned int)regs->pc); - dump(regs); - printf("Unhandled IRQ or exceptions!\n"); - printf("Please reset the board \n"); -} - -void blackfin_init_IRQ(void) -{ - *(unsigned volatile long *)(SICA_IMASK0) = 0; -#ifndef CONFIG_KGDB - *(unsigned volatile long *)(EVT1) = 0x0; -#endif - *(unsigned volatile long *)(EVT2) = - (unsigned volatile long)evt_nmi; - *(unsigned volatile long *)(EVT3) = - (unsigned volatile long)trap; - *(unsigned volatile long *)(EVT5) = - (unsigned volatile long)evt_ivhw; - *(unsigned volatile long *)(EVT0) = - (unsigned volatile long)evt_rst; - *(unsigned volatile long *)(EVT6) = - (unsigned volatile long)evt_timer; - *(unsigned volatile long *)(EVT7) = - (unsigned volatile long)evt_evt7; - *(unsigned volatile long *)(EVT8) = - (unsigned volatile long)evt_evt8; - *(unsigned volatile long *)(EVT9) = - (unsigned volatile long)evt_evt9; - *(unsigned volatile long *)(EVT10) = - (unsigned volatile long)evt_evt10; - *(unsigned volatile long *)(EVT11) = - (unsigned volatile long)evt_evt11; - *(unsigned volatile long *)(EVT12) = - (unsigned volatile long)evt_evt12; - *(unsigned volatile long *)(EVT13) = - (unsigned volatile long)evt_evt13; - *(unsigned volatile long *)(EVT14) = - (unsigned volatile long)evt_system_call; - *(unsigned volatile long *)(EVT15) = - (unsigned volatile long)evt_soft_int1; - *(volatile unsigned long *)ILAT = 0; - asm("csync;"); - *(volatile unsigned long *)IMASK = 0xffbf; - asm("csync;"); -} - -void exception_handle(void) -{ -#if defined (CONFIG_PANIC_HANG) - display_excp(); -#else - udelay(100000); /* allow messages to go out */ - do_reset(NULL, 0, 0, NULL); -#endif -} - -void display_excp(void) -{ - printf("Exception!\n"); -} diff --git a/cpu/bf561/serial.c b/cpu/bf561/serial.c deleted file mode 100644 index a398fd5..0000000 --- a/cpu/bf561/serial.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * U-boot - serial.c Serial driver for BF561 - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART. - * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>, - * BuyWays B.V. (www.buyways.nl) - * - * Based heavily on blkfinserial.c - * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs. - * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com> - * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com> - * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com> - * - * Based on code from 68328 version serial driver imlpementation which was: - * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <asm/system.h> -#include <asm/bitops.h> -#include <asm/delay.h> -#include "serial.h" -#include <asm/io.h> -#include <asm/mach-common/bits/uart.h> - -DECLARE_GLOBAL_DATA_PTR; - -unsigned long pll_div_fact; - -void calc_baud(void) -{ - unsigned char i; - int temp; - u_long sclk = get_sclk(); - - for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { - temp = sclk / (baud_table[i] * 8); - if ((temp & 0x1) == 1) { - temp++; - } - temp = temp / 2; - hw_baud_table[i].dl_high = (temp >> 8) & 0xFF; - hw_baud_table[i].dl_low = (temp) & 0xFF; - } -} - -void serial_setbrg(void) -{ - int i; - - calc_baud(); - - for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { - if (gd->baudrate == baud_table[i]) - break; - } - - /* Enable UART */ - *pUART_GCTL |= UCEN; - SSYNC(); - - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH; - SSYNC(); - - *pUART_DLL = hw_baud_table[i].dl_low; - SSYNC(); - *pUART_DLH = hw_baud_table[i].dl_high; - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER; - SSYNC(); - - /* - * Enable ERBFI and ELSI interrupts - * to poll SIC_ISR register - */ - *pUART_IER = ELSI | ERBFI | ETBEI; - SSYNC(); - - /* Set LCR to Word Lengh 8-bit word select */ - *pUART_LCR = WLS_8; - SSYNC(); - - return; -} - -int serial_init(void) -{ - serial_setbrg(); - return (0); -} - -void serial_putc(const char c) -{ - if ((*pUART_LSR) & TEMT) { - if (c == '\n') - serial_putc('\r'); - - local_put_char(c); - } - - while (!((*pUART_LSR) & TEMT)) - SYNC_ALL; - - return; -} - -int serial_tstc(void) -{ - if (*pUART_LSR & DR) - return 1; - else - return 0; -} - -int serial_getc(void) -{ - unsigned short uart_lsr_val, uart_rbr_val; - unsigned long isr_val; - int ret; - - /* Poll for RX Interrupt */ - while (!serial_tstc()) - continue; - asm("csync;"); - - uart_lsr_val = *pUART_LSR; /* Clear status bit */ - uart_rbr_val = *pUART_RBR; /* getc() */ - - if (uart_lsr_val & (OE|PE|FE|BI)) { - ret = -1; - } else { - ret = uart_rbr_val & 0xff; - } - - return ret; -} - -void serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - -static void local_put_char(char ch) -{ - int flags = 0; - unsigned long isr_val; - - /* Poll for TX Interruput */ - while (!(*pUART_LSR & THRE)) - continue; - asm("csync;"); - - *pUART_THR = ch; /* putc() */ - - return; -} diff --git a/cpu/bf561/serial.h b/cpu/bf561/serial.h deleted file mode 100644 index 647560c..0000000 --- a/cpu/bf561/serial.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * U-boot - bf561_serial.h Serial Driver defines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. - * Copyright (C) 2003 Bas Vermeulen <bas@buyways.nl> - * BuyWays B.V. (www.buyways.nl) - * - * Based heavily on: - * blkfinserial.h: Definitions for the BlackFin DSP serial driver. - * - * Copyright (C) 2001 Tony Z. Kou tonyko@arcturusnetworks.com - * Copyright (C) 2001 Arcturus Networks Inc. <www.arcturusnetworks.com> - * - * Based on code from 68328serial.c which was: - * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _Bf561_SERIAL_H -#define _Bf561_SERIAL_H - -#include <linux/config.h> -#include <asm/blackfin.h> - -#define SYNC_ALL __asm__ __volatile__ ("ssync;\n") -#define ACCESS_LATCH *pUART_LCR |= DLAB; -#define ACCESS_PORT_IER *pUART_LCR &= (~DLAB); - -void serial_setbrg(void); -static void local_put_char(char ch); -void calc_baud(void); -void serial_setbrg(void); -int serial_init(void); -void serial_putc(const char c); -int serial_tstc(void); -int serial_getc(void); -void serial_puts(const char *s); -static void local_put_char(char ch); - -int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 }; - -struct { - unsigned char dl_high; - unsigned char dl_low; -} hw_baud_table[5]; - -#ifdef CONFIG_STAMP -extern unsigned long pll_div_fact; -#endif - -#endif diff --git a/cpu/bf561/start.S b/cpu/bf561/start.S deleted file mode 100644 index 6565de8..0000000 --- a/cpu/bf561/start.S +++ /dev/null @@ -1,303 +0,0 @@ -/* - * U-boot - start.S Startup file of u-boot for BF533/BF561 - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on head.S - * Copyright (c) 2003 Metrowerks/Motorola - * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * (c) 1995, Dionne & Associates - * (c) 1995, DKG Display Tech. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* - * Note: A change in this file subsequently requires a change in - * board/$(board_name)/config.mk for a valid u-boot.bin - */ - -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> - -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/dma.h> -#include <asm/mach-common/bits/pll.h> - -.global _stext; -.global __bss_start; -.global start; -.global _start; -.global edata; -.global _exit; -.global init_sdram; - -.text -_start: -start: -_stext: - - R0 = 0x32; - SYSCFG = R0; - SSYNC; - - /* - * As per HW reference manual DAG registers, - * DATA and Address resgister shall be zero'd - * in initialization, after a reset state - */ - r1 = 0; /* Data registers zero'd */ - r2 = 0; - r3 = 0; - r4 = 0; - r5 = 0; - r6 = 0; - r7 = 0; - - p0 = 0; /* Address registers zero'd */ - p1 = 0; - p2 = 0; - p3 = 0; - p4 = 0; - p5 = 0; - - i0 = 0; /* DAG Registers zero'd */ - i1 = 0; - i2 = 0; - i3 = 0; - m0 = 0; - m1 = 0; - m3 = 0; - m3 = 0; - l0 = 0; - l1 = 0; - l2 = 0; - l3 = 0; - b0 = 0; - b1 = 0; - b2 = 0; - b3 = 0; - - /* - * Set loop counters to zero, to make sure that - * hw loops are disabled. - */ - r0 = 0; - lc0 = r0; - lc1 = r0; - - SSYNC; - - /* Check soft reset status */ - p0.h = SWRST >> 16; - p0.l = SWRST & 0xFFFF; - r0.l = w[p0]; - - cc = bittst(r0, 15); - if !cc jump no_soft_reset; - - /* Clear Soft reset */ - r0 = 0x0000; - w[p0] = r0; - ssync; - -no_soft_reset: - nop; - - /* Clear EVT registers */ - p0.h = (EVT0 >> 16); - p0.l = (EVT0 & 0xFFFF); - p0 += 8; - p1 = 14; - r1 = 0; - LSETUP(4,4) lc0 = p1; - [ p0 ++ ] = r1; - - p0.h = hi(SICA_IWR0); - p0.l = lo(SICA_IWR0); - r0.l = 0x1; - w[p0] = r0.l; - SSYNC; - - sp.l = (0xffb01000 & 0xFFFF); - sp.h = (0xffb01000 >> 16); - - /* - * Check if the code is in SDRAM - * If the code is in SDRAM, skip SDRAM initializaiton - */ - call get_pc; - r3.l = 0x0; - r3.h = 0x2000; - cc = r0 < r3 (iu); - if cc jump sdram_initialized; - call init_sdram; - /* relocate into to RAM */ -sdram_initialized: - call get_pc; -offset: - r2.l = offset; - r2.h = offset; - r3.l = start; - r3.h = start; - r1 = r2 - r3; - - r0 = r0 - r1; - p1 = r0; - - p2.l = (CFG_MONITOR_BASE & 0xffff); - p2.h = (CFG_MONITOR_BASE >> 16); - - p3 = 0x04; - p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff); - p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16); -loop1: - r1 = [p1 ++ p3]; - [p2 ++ p3] = r1; - cc=p2==p4; - if !cc jump loop1; - /* - * configure STACK - */ - r0.h = (CONFIG_STACKBASE >> 16); - r0.l = (CONFIG_STACKBASE & 0xFFFF); - sp = r0; - fp = sp; - - /* - * This next section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* To keep ourselves in the supervisor mode */ - p0.l = (EVT15 & 0xFFFF); - p0.h = (EVT15 >> 16); - - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - - p0.l = (IMASK & 0xFFFF); - p0.h = (IMASK >> 16); - r0.l = LO(EVT_IVG15); - r0.h = HI(EVT_IVG15); - [p0] = r0; - raise 15; - p0.l = WAIT_HERE; - p0.h = WAIT_HERE; - reti = p0; - rti; - -WAIT_HERE: - jump WAIT_HERE; - -.global _real_start; -_real_start: - [ -- sp ] = reti; - - /* DMA reset code to Hi of L1 SRAM */ -copy: - P1.H = hi(SYSMMR_BASE); /* P1 Points to the beginning of SYSTEM MMR Space */ - P1.L = lo(SYSMMR_BASE); - - R0.H = reset_start; /* Source Address (high) */ - R0.L = reset_start; /* Source Address (low) */ - R1.H = reset_end; - R1.L = reset_end; - R2 = R1 - R0; /* Count */ - R1.H = hi(L1_INST_SRAM); /* Destination Address (high) */ - R1.L = lo(L1_INST_SRAM); /* Destination Address (low) */ - R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ - R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ - -DMA: - R6 = 0x1 (Z); - W[P1+OFFSET_(IMDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ - W[P1+OFFSET_(IMDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ - - [P1+OFFSET_(IMDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ - W[P1+OFFSET_(IMDMA_S0_X_COUNT)] = R2; /* Set Source Count */ - /* Set Source DMAConfig = DMA Enable, - Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ - W[P1+OFFSET_(IMDMA_S0_CONFIG)] = R3; - - [P1+OFFSET_(IMDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ - W[P1+OFFSET_(IMDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ - /* Set Destination DMAConfig = DMA Enable, - Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ - W[P1+OFFSET_(IMDMA_D0_CONFIG)] = R4; - -WAIT_DMA_DONE: - p0.h = hi(IMDMA_D0_IRQ_STATUS); - p0.l = lo(IMDMA_D0_IRQ_STATUS); - R0 = W[P0](Z); - CC = BITTST(R0, 0); - if ! CC jump WAIT_DMA_DONE - - R0 = 0x1; - W[P1+OFFSET_(IMDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ - - /* Initialize BSS Section with 0 s */ - p1.l = __bss_start; - p1.h = __bss_start; - p2.l = _end; - p2.h = _end; - r1 = p1; - r2 = p2; - r3 = r2 - r1; - r3 = r3 >> 2; - p3 = r3; - lsetup (_clear_bss, _clear_bss_end ) lc1 = p3; - CC = p2<=p1; - if CC jump _clear_bss_skip; - r0 = 0; -_clear_bss: -_clear_bss_end: - [p1++] = r0; -_clear_bss_skip: - - p0.l = _start1; - p0.h = _start1; - jump (p0); - -reset_start: - p0.h = WDOG_CNT >> 16; - p0.l = WDOG_CNT & 0xffff; - r0 = 0x0010; - w[p0] = r0; - p0.h = WDOG_CTL >> 16; - p0.l = WDOG_CTL & 0xffff; - r0 = 0x0000; - w[p0] = r0; -reset_wait: - jump reset_wait; - -reset_end: nop; - -_exit: - jump.s _exit; -get_pc: - r0 = rets; - rts; diff --git a/cpu/bf561/traps.c b/cpu/bf561/traps.c deleted file mode 100644 index e35620c..0000000 --- a/cpu/bf561/traps.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * U-boot - traps.c Routines related to interrupts and exceptions - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * No original Copyright holder listed, - * Probabily original (C) Roman Zippel (assigned DJD, 1999) - * - * Copyright 2003 Metrowerks - for Blackfin - * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca> - * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <linux/types.h> -#include <asm/errno.h> -#include <asm/system.h> -#include <asm/traps.h> -#include "cpu.h" -#include <asm/cplb.h> -#include <asm/io.h> -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/mpu.h> - -void init_IRQ(void) -{ - blackfin_init_IRQ(); - return; -} - -void process_int(unsigned long vec, struct pt_regs *fp) -{ - printf("interrupt\n"); - return; -} - -extern unsigned int icplb_table[page_descriptor_table_size][2]; -extern unsigned int dcplb_table[page_descriptor_table_size][2]; - -unsigned long last_cplb_fault_retx; - -static unsigned int cplb_sizes[4] = - { 1024, 4 * 1024, 1024 * 1024, 4 * 1024 * 1024 }; - -void trap_c(struct pt_regs *regs) -{ - unsigned int addr; - unsigned long trapnr = (regs->seqstat) & EXCAUSE; - unsigned int i, j, size, *I0, *I1; - unsigned short data = 0; - - switch (trapnr) { - /* 0x26 - Data CPLB Miss */ - case VEC_CPLB_M: - -#if ANOMALY_05000261 - /* - * Work around an anomaly: if we see a new DCPLB fault, return - * without doing anything. Then, if we get the same fault again, - * handle it. - */ - addr = last_cplb_fault_retx; - last_cplb_fault_retx = regs->retx; - printf("this time, curr = 0x%08x last = 0x%08x\n", addr, - last_cplb_fault_retx); - if (addr != last_cplb_fault_retx) - goto trap_c_return; -#endif - data = 1; - - case VEC_CPLB_I_M: - - if (data) - addr = *pDCPLB_FAULT_ADDR; - else - addr = *pICPLB_FAULT_ADDR; - - for (i = 0; i < page_descriptor_table_size; i++) { - if (data) { - size = cplb_sizes[dcplb_table[i][1] >> 16]; - j = dcplb_table[i][0]; - } else { - size = cplb_sizes[icplb_table[i][1] >> 16]; - j = icplb_table[i][0]; - } - if ((j <= addr) && ((j + size) > addr)) { - debug("found %i 0x%08x\n", i, j); - break; - } - } - if (i == page_descriptor_table_size) { - printf("something is really wrong\n"); - do_reset(NULL, 0, 0, NULL); - } - - /* Turn the cache off */ - if (data) { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL &= - ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - SSYNC(); - } else { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); - SSYNC(); - } - - if (data) { - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - } else { - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - } - - j = 0; - while (*I1 & CPLB_LOCK) { - debug("skipping %i %08p - %08x\n", j, I1, *I1); - *I0++; - *I1++; - j++; - } - - debug("remove %i 0x%08x 0x%08x\n", j, *I0, *I1); - - for (; j < 15; j++) { - debug("replace %i 0x%08x 0x%08x\n", j, I0, I0 + 1); - *I0++ = *(I0 + 1); - *I1++ = *(I1 + 1); - } - - if (data) { - *I0 = dcplb_table[i][0]; - *I1 = dcplb_table[i][1]; - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - } else { - *I0 = icplb_table[i][0]; - *I1 = icplb_table[i][1]; - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - } - - for (j = 0; j < 16; j++) { - debug("%i 0x%08x 0x%08x\n", j, *I0++, *I1++); - } - - /* Turn the cache back on */ - if (data) { - j = *(unsigned int *)DMEM_CONTROL; - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL = - ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | j; - SSYNC(); - } else { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; - SSYNC(); - } - - break; - default: - /* All traps come here */ - printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); - printf("stack frame=0x%x, ", (unsigned int)regs); - printf("bad PC=0x%04x\n", (unsigned int)regs->pc); - dump(regs); - printf("\n\n"); - - printf("Unhandled IRQ or exceptions!\n"); - printf("Please reset the board \n"); - do_reset(NULL, 0, 0, NULL); - } - -trap_c_return: - return; - -} - -void dump(struct pt_regs *fp) -{ - debug("RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n", fp->rete, - fp->retn, fp->retx, fp->rets); - debug("IPEND: %04lx SYSCFG: %04lx\n", fp->ipend, fp->syscfg); - debug("SEQSTAT: %08lx SP: %08lx\n", (long)fp->seqstat, (long)fp); - debug("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", fp->r0, - fp->r1, fp->r2, fp->r3); - debug("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", fp->r4, - fp->r5, fp->r6, fp->r7); - debug("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", fp->p0, - fp->p1, fp->p2, fp->p3); - debug("P4: %08lx P5: %08lx FP: %08lx\n", fp->p4, fp->p5, fp->fp); - debug("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", - fp->a0w, fp->a0x, fp->a1w, fp->a1x); - - debug("LB0: %08lx LT0: %08lx LC0: %08lx\n", fp->lb0, fp->lt0, - fp->lc0); - debug("LB1: %08lx LT1: %08lx LC1: %08lx\n", fp->lb1, fp->lt1, - fp->lc1); - debug("B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n", fp->b0, fp->l0, - fp->m0, fp->i0); - debug("B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n", fp->b1, fp->l1, - fp->m1, fp->i1); - debug("B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n", fp->b2, fp->l2, - fp->m2, fp->i2); - debug("B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n", fp->b3, fp->l3, - fp->m3, fp->i3); - - debug("DCPLB_FAULT_ADDR=%p\n", *pDCPLB_FAULT_ADDR); - debug("ICPLB_FAULT_ADDR=%p\n", *pICPLB_FAULT_ADDR); - -} diff --git a/cpu/bf561/video.c b/cpu/bf561/video.c deleted file mode 100644 index 3ff0151..0000000 --- a/cpu/bf561/video.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * (C) Copyright 2000 - * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it - * (C) Copyright 2002 - * Wolfgang Denk, wd@denx.de - * (C) Copyright 2006 - * Aubrey Li, aubrey.li@analog.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <stdarg.h> -#include <common.h> -#include <config.h> -#include <asm/blackfin.h> -#include <i2c.h> -#include <linux/types.h> -#include <devices.h> - -#ifdef CONFIG_VIDEO -#define NTSC_FRAME_ADDR 0x06000000 -#include "video.h" - -/* NTSC OUTPUT SIZE 720 * 240 */ -#define VERTICAL 2 -#define HORIZONTAL 4 - -int is_vblank_line(const int line) -{ - /* - * This array contains a single bit for each line in - * an NTSC frame. - */ - if ((line <= 18) || (line >= 264 && line <= 281) || (line == 528)) - return true; - - return false; -} - -int NTSC_framebuffer_init(char *base_address) -{ - const int NTSC_frames = 1; - const int NTSC_lines = 525; - char *dest = base_address; - int frame_num, line_num; - - for (frame_num = 0; frame_num < NTSC_frames; ++frame_num) { - for (line_num = 1; line_num <= NTSC_lines; ++line_num) { - unsigned int code; - int offset = 0; - int i; - - if (is_vblank_line(line_num)) - offset++; - - if (line_num > 266 || line_num < 3) - offset += 2; - - /* Output EAV code */ - code = SystemCodeMap[offset].EAV; - write_dest_byte((char)(code >> 24) & 0xff); - write_dest_byte((char)(code >> 16) & 0xff); - write_dest_byte((char)(code >> 8) & 0xff); - write_dest_byte((char)(code) & 0xff); - - /* Output horizontal blanking */ - for (i = 0; i < 67 * 2; ++i) { - write_dest_byte(0x80); - write_dest_byte(0x10); - } - - /* Output SAV */ - code = SystemCodeMap[offset].SAV; - write_dest_byte((char)(code >> 24) & 0xff); - write_dest_byte((char)(code >> 16) & 0xff); - write_dest_byte((char)(code >> 8) & 0xff); - write_dest_byte((char)(code) & 0xff); - - /* Output empty horizontal data */ - for (i = 0; i < 360 * 2; ++i) { - write_dest_byte(0x80); - write_dest_byte(0x10); - } - } - } - - return dest - base_address; -} - -void fill_frame(char *Frame, int Value) -{ - int *OddPtr32; - int OddLine; - int *EvenPtr32; - int EvenLine; - int i; - int *data; - int m, n; - - /* fill odd and even frames */ - for (OddLine = 22, EvenLine = 285; OddLine < 263; OddLine++, EvenLine++) { - OddPtr32 = (int *)((Frame + (OddLine * 1716)) + 276); - EvenPtr32 = (int *)((Frame + (EvenLine * 1716)) + 276); - for (i = 0; i < 360; i++, OddPtr32++, EvenPtr32++) { - *OddPtr32 = Value; - *EvenPtr32 = Value; - } - } - - for (m = 0; m < VERTICAL; m++) { - data = (int *)u_boot_logo.data; - for (OddLine = (22 + m), EvenLine = (285 + m); - OddLine < (u_boot_logo.height * VERTICAL) + (22 + m); - OddLine += VERTICAL, EvenLine += VERTICAL) { - OddPtr32 = (int *)((Frame + ((OddLine) * 1716)) + 276); - EvenPtr32 = - (int *)((Frame + ((EvenLine) * 1716)) + 276); - for (i = 0; i < u_boot_logo.width / 2; i++) { - /* enlarge one pixel to m x n */ - for (n = 0; n < HORIZONTAL; n++) { - *OddPtr32++ = *data; - *EvenPtr32++ = *data; - } - data++; - } - } - } -} - -void video_putc(const char c) -{ -} - -void video_puts(const char *s) -{ -} - -static int video_init(void) -{ - char *NTSCFrame; - NTSCFrame = (char *)NTSC_FRAME_ADDR; - NTSC_framebuffer_init(NTSCFrame); - fill_frame(NTSCFrame, BLUE); - - *pPPI_CONTROL = 0x0082; - *pPPI_FRAME = 0x020D; - - *pDMA0_START_ADDR = NTSCFrame; - *pDMA0_X_COUNT = 0x035A; - *pDMA0_X_MODIFY = 0x0002; - *pDMA0_Y_COUNT = 0x020D; - *pDMA0_Y_MODIFY = 0x0002; - *pDMA0_CONFIG = 0x1015; - *pPPI_CONTROL = 0x0083; - return 0; -} - -int drv_video_init(void) -{ - int error, devices = 1; - - device_t videodev; - - video_init(); /* Video initialization */ - - memset(&videodev, 0, sizeof(videodev)); - - strcpy(videodev.name, "video"); - videodev.ext = DEV_EXT_VIDEO; /* Video extensions */ - videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */ - videodev.putc = video_putc; /* 'putc' function */ - videodev.puts = video_puts; /* 'puts' function */ - - error = device_register(&videodev); - - return (error == 0) ? devices : error; -} -#endif diff --git a/cpu/bf561/video.h b/cpu/bf561/video.h deleted file mode 100644 index d237f6a..0000000 --- a/cpu/bf561/video.h +++ /dev/null @@ -1,25 +0,0 @@ -#include <video_logo.h> -#define write_dest_byte(val) {*dest++=val;} -#define BLACK (0x01800180) /* black pixel pattern */ -#define BLUE (0x296E29F0) /* blue pixel pattern */ -#define RED (0x51F0515A) /* red pixel pattern */ -#define MAGENTA (0x6ADE6ACA) /* magenta pixel pattern */ -#define GREEN (0x91229136) /* green pixel pattern */ -#define CYAN (0xAA10AAA6) /* cyan pixel pattern */ -#define YELLOW (0xD292D210) /* yellow pixel pattern */ -#define WHITE (0xFE80FE80) /* white pixel pattern */ - -#define true 1 -#define false 0 - -typedef struct { - unsigned int SAV; - unsigned int EAV; -} SystemCodeType; - -const SystemCodeType SystemCodeMap[4] = { - {0xFF000080, 0xFF00009D}, - {0xFF0000AB, 0xFF0000B6}, - {0xFF0000C7, 0xFF0000DA}, - {0xFF0000EC, 0xFF0000F1} -}; diff --git a/cpu/blackfin/.gitignore b/cpu/blackfin/.gitignore new file mode 100644 index 0000000..0ec9d56 --- /dev/null +++ b/cpu/blackfin/.gitignore @@ -0,0 +1 @@ +bootrom-asm-offsets.[chs] diff --git a/cpu/blackfin/Makefile b/cpu/blackfin/Makefile new file mode 100644 index 0000000..f194a38 --- /dev/null +++ b/cpu/blackfin/Makefile @@ -0,0 +1,65 @@ +# +# U-boot - Makefile +# +# Copyright (c) 2005-2008 Analog Device Inc. +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Licensed under the GPL-2 or later. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).a + +EXTRA := +CEXTRA := initcode.o +SEXTRA := start.o +SOBJS := interrupt.o cache.o flush.o +COBJS := cpu.o traps.o interrupts.o reset.o serial.o i2c.o watchdog.o + +ifeq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS) +COBJS += initcode.o +endif + +SRCS := $(SEXTRA:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +EXTRA := $(addprefix $(obj),$(EXTRA)) +CEXTRA := $(addprefix $(obj),$(CEXTRA)) +SEXTRA := $(addprefix $(obj),$(SEXTRA)) + +all: $(obj).depend $(LIB) $(obj).depend $(EXTRA) $(CEXTRA) $(SEXTRA) check_initcode + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +$(OBJS): $(obj)bootrom-asm-offsets.h +$(obj)bootrom-asm-offsets.c: bootrom-asm-offsets.c.in bootrom-asm-offsets.awk + echo '#include <asm/mach-common/bits/bootrom.h>' | $(CPP) $(CPPFLAGS) - | gawk -f ./bootrom-asm-offsets.awk > $@.tmp + mv $@.tmp $@ +$(obj)bootrom-asm-offsets.s: $(obj)bootrom-asm-offsets.c + $(CC) $(CFLAGS) -S $^ -o $@.tmp + mv $@.tmp $@ +$(obj)bootrom-asm-offsets.h: $(obj)bootrom-asm-offsets.s + sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}" $^ > $@ + +# make sure our initcode (which goes into LDR) does not +# have relocs or external references +READINIT = env LC_ALL=C $(CROSS_COMPILE)readelf -s $< +check_initcode: $(obj)initcode.o +ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS) + @if $(READINIT) | grep '\<GLOBAL\>.*\<UND\>' ; then \ + echo "$< contains external references!" 1>&2 ; \ + exit 1 ; \ + fi +endif + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/blackfin/bootrom-asm-offsets.awk b/cpu/blackfin/bootrom-asm-offsets.awk new file mode 100755 index 0000000..1d61824 --- /dev/null +++ b/cpu/blackfin/bootrom-asm-offsets.awk @@ -0,0 +1,41 @@ +#!/usr/bin/gawk -f +BEGIN { + print "/* DO NOT EDIT: AUTOMATICALLY GENERATED" + print " * Input files: bootrom-asm-offsets.awk bootrom-asm-offsets.c.in" + print " * DO NOT EDIT: AUTOMATICALLY GENERATED" + print " */" + print "" + system("cat bootrom-asm-offsets.c.in") + print "{" +} + +{ + /* find a structure definition */ + if ($0 ~ /typedef struct .* {/) { + delete members; + i = 0; + + /* extract each member of the structure */ + while (1) { + getline + if ($1 == "}") + break; + gsub(/[*;]/, ""); + members[i++] = $NF; + } + + /* grab the structure's name */ + struct = $NF; + sub(/;$/, "", struct); + + /* output the DEFINE() macros */ + while (i-- > 0) + print "\tDEFINE(" struct ", " members[i] ");" + print "" + } +} + +END { + print "\treturn 0;" + print "}" +} diff --git a/cpu/blackfin/bootrom-asm-offsets.c.in b/cpu/blackfin/bootrom-asm-offsets.c.in new file mode 100644 index 0000000..3146e46 --- /dev/null +++ b/cpu/blackfin/bootrom-asm-offsets.c.in @@ -0,0 +1,12 @@ +/* A little trick taken from the kernel asm-offsets.h where we convert + * the C structures automatically into a bunch of defines for use in + * the assembly files. + */ + +#include <linux/stddef.h> +#include <asm/mach-common/bits/bootrom.h> + +#define _DEFINE(sym, val) asm volatile("\n->" #sym " %0 " #val : : "i" (val)) +#define DEFINE(s, m) _DEFINE(offset_##s##_##m, offsetof(s, m)) + +int main(int argc, char *argv[]) diff --git a/cpu/blackfin/cache.S b/cpu/blackfin/cache.S new file mode 100644 index 0000000..51bdb30 --- /dev/null +++ b/cpu/blackfin/cache.S @@ -0,0 +1,61 @@ +/* cache.S - low level cache handling routines + * Copyright (C) 2003-2007 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include <asm/linkage.h> +#include <config.h> +#include <asm/blackfin.h> + +.text +.align 2 +ENTRY(_blackfin_icache_flush_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; +1: + IFLUSH[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + IFLUSH[P0]; + SSYNC; + RTS; +ENDPROC(_blackfin_icache_flush_range) + +ENTRY(_blackfin_dcache_flush_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; +1: + FLUSH[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + FLUSH[P0]; + SSYNC; + RTS; +ENDPROC(_blackfin_dcache_flush_range) + +ENTRY(_blackfin_dcache_invalidate_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; +1: + FLUSHINV[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + + /* + * If the data crosses a cache line, then we'll be pointing to + * the last cache line, but won't have flushed/invalidated it yet, so do + * one more. + */ + FLUSHINV[P0]; + SSYNC; + RTS; +ENDPROC(_blackfin_dcache_invalidate_range) diff --git a/cpu/blackfin/cpu.c b/cpu/blackfin/cpu.c new file mode 100644 index 0000000..53de5ab --- /dev/null +++ b/cpu/blackfin/cpu.c @@ -0,0 +1,141 @@ +/* + * U-boot - cpu.c CPU specific functions + * + * Copyright (c) 2005-2008 Analog Devices Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <command.h> +#include <asm/blackfin.h> +#include <asm/cplb.h> +#include <asm/mach-common/bits/core.h> +#include <asm/mach-common/bits/mpu.h> +#include <asm/mach-common/bits/trace.h> + +#include "cpu.h" +#include "serial.h" + +void icache_enable(void) +{ + bfin_write_IMEM_CONTROL(bfin_read_IMEM_CONTROL() | (IMC | ENICPLB)); + SSYNC(); +} + +void icache_disable(void) +{ + bfin_write_IMEM_CONTROL(bfin_read_IMEM_CONTROL() & ~(IMC | ENICPLB)); + SSYNC(); +} + +int icache_status(void) +{ + return bfin_read_IMEM_CONTROL() & ENICPLB; +} + +void dcache_enable(void) +{ + bfin_write_DMEM_CONTROL(bfin_read_DMEM_CONTROL() | (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)); + SSYNC(); +} + +void dcache_disable(void) +{ + bfin_write_DMEM_CONTROL(bfin_read_DMEM_CONTROL() & ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0)); + SSYNC(); +} + +int dcache_status(void) +{ + return bfin_read_DMEM_CONTROL() & ENDCPLB; +} + +__attribute__ ((__noreturn__)) +void cpu_init_f(ulong bootflag, ulong loaded_from_ldr) +{ + /* Build a NOP slide over the LDR jump block. Whee! */ + serial_early_puts("NOP Slide\n"); + char nops[0xC]; + memset(nops, 0x00, sizeof(nops)); + extern char _stext_l1; + memcpy(&_stext_l1 - sizeof(nops), nops, sizeof(nops)); + + if (!loaded_from_ldr) { + /* Relocate sections into L1 if the LDR didn't do it -- don't + * check length because the linker script does the size + * checking at build time. + */ + serial_early_puts("L1 Relocate\n"); + extern char _stext_l1, _etext_l1, _stext_l1_lma; + memcpy(&_stext_l1, &_stext_l1_lma, (&_etext_l1 - &_stext_l1)); + extern char _sdata_l1, _edata_l1, _sdata_l1_lma; + memcpy(&_sdata_l1, &_sdata_l1_lma, (&_edata_l1 - &_sdata_l1)); + } +#if defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) + /* The BF537 bootrom will reset the EBIU_AMGCTL register on us + * after it has finished loading the LDR. So configure it again. + */ + else + bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); +#endif + +#ifdef CONFIG_DEBUG_DUMP + /* Turn on hardware trace buffer */ + bfin_write_TBUFCTL(TBUFPWR | TBUFEN); +#endif + +#ifndef CONFIG_PANIC_HANG + /* Reset upon a double exception rather than just hanging. + * Do not do bfin_read on SWRST as that will reset status bits. + */ + bfin_write_SWRST(DOUBLE_FAULT); +#endif + + serial_early_puts("Board init flash\n"); + board_init_f(bootflag); +} + +int exception_init(void) +{ + bfin_write_EVT3(trap); + return 0; +} + +int irq_init(void) +{ +#ifdef SIC_IMASK0 + bfin_write_SIC_IMASK0(0); + bfin_write_SIC_IMASK1(0); +# ifdef SIC_IMASK2 + bfin_write_SIC_IMASK2(0); +# endif +#elif defined(SICA_IMASK0) + bfin_write_SICA_IMASK0(0); + bfin_write_SICA_IMASK1(0); +#else + bfin_write_SIC_IMASK(0); +#endif + bfin_write_EVT2(evt_default); /* NMI */ + bfin_write_EVT5(evt_default); /* hardware error */ + bfin_write_EVT6(evt_default); /* core timer */ + bfin_write_EVT7(evt_default); + bfin_write_EVT8(evt_default); + bfin_write_EVT9(evt_default); + bfin_write_EVT10(evt_default); + bfin_write_EVT11(evt_default); + bfin_write_EVT12(evt_default); + bfin_write_EVT13(evt_default); + bfin_write_EVT14(evt_default); + bfin_write_EVT15(evt_default); + bfin_write_ILAT(0); + CSYNC(); + /* enable all interrupts except for core timer */ + irq_flags = 0xffffffbf; + local_irq_enable(); + CSYNC(); + return 0; +} diff --git a/cpu/bf537/start1.S b/cpu/blackfin/cpu.h index 6d4731b..0a13c28 100644 --- a/cpu/bf537/start1.S +++ b/cpu/blackfin/cpu.h @@ -1,7 +1,7 @@ /* - * U-boot - start1.S Code running out of RAM after relocation + * U-boot - cpu.h * - * Copyright (c) 2005-2007 Analog Devices Inc. + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -22,17 +22,17 @@ * MA 02110-1301 USA */ -#define ASSEMBLY -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> +#ifndef _CPU_H_ +#define _CPU_H_ -.global start1; -.global _start1; +#include <command.h> -.text -_start1: -start1: - sp += -12; - call _board_init_f; - sp += 12; +void board_reset(void) __attribute__((__weak__)); +void bfin_reset_or_hang(void) __attribute__((__noreturn__)); +void bfin_panic(struct pt_regs *reg); +void dump(struct pt_regs *regs); + +asmlinkage void trap(void); +asmlinkage void evt_default(void); + +#endif diff --git a/cpu/blackfin/flush.S b/cpu/blackfin/flush.S new file mode 100644 index 0000000..8072b86 --- /dev/null +++ b/cpu/blackfin/flush.S @@ -0,0 +1,230 @@ +/* flush.S - low level cache flushing routines + * Copyright (C) 2003-2007 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include <config.h> +#include <asm/blackfin.h> +#include <asm/cplb.h> +#include <asm/mach-common/bits/mpu.h> + +.text + +/* This is an external function being called by the user + * application through __flush_cache_all. Currently this function + * serves the purpose of flushing all the pending writes in + * in the data cache. + */ + +ENTRY(_flush_data_cache) + [--SP] = ( R7:6, P5:4 ); + LINK 12; + SP += -12; + P5.H = HI(DCPLB_ADDR0); + P5.L = LO(DCPLB_ADDR0); + P4.H = HI(DCPLB_DATA0); + P4.L = LO(DCPLB_DATA0); + R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z); + R6 = 16; +.Lnext: R0 = [P5++]; + R1 = [P4++]; + CC = BITTST(R1, 14); /* Is it write-through?*/ + IF CC JUMP .Lskip; /* If so, ignore it.*/ + R2 = R1 & R7; /* Is it a dirty, cached page?*/ + CC = R2; + IF !CC JUMP .Lskip; /* If not, ignore it.*/ + [--SP] = RETS; + CALL _dcplb_flush; /* R0 = page, R1 = data*/ + RETS = [SP++]; +.Lskip: R6 += -1; + CC = R6; + IF CC JUMP .Lnext; + SSYNC; + SP += 12; + UNLINK; + ( R7:6, P5:4 ) = [SP++]; + RTS; +ENDPROC(_flush_data_cache) + +/* This is an internal function to flush all pending + * writes in the cache associated with a particular DCPLB. + * + * R0 - page's start address + * R1 - CPLB's data field. + */ + +.align 2 +ENTRY(_dcplb_flush) + [--SP] = ( R7:0, P5:0 ); + [--SP] = LC0; + [--SP] = LT0; + [--SP] = LB0; + [--SP] = LC1; + [--SP] = LT1; + [--SP] = LB1; + + /* If it's a 1K or 4K page, then it's quickest to + * just systematically flush all the addresses in + * the page, regardless of whether they're in the + * cache, or dirty. If it's a 1M or 4M page, there + * are too many addresses, and we have to search the + * cache for lines corresponding to the page. + */ + + CC = BITTST(R1, 17); /* 1MB or 4MB */ + IF !CC JUMP .Ldflush_whole_page; + + /* We're only interested in the page's size, so extract + * this from the CPLB (bits 17:16), and scale to give an + * offset into the page_size and page_prefix tables. + */ + + R1 <<= 14; + R1 >>= 30; + R1 <<= 2; + + /* The page could be mapped into Bank A or Bank B, depending + * on (a) whether both banks are configured as cache, and + * (b) on whether address bit A[x] is set. x is determined + * by DCBS in DMEM_CONTROL + */ + + R2 = 0; /* Default to Bank A (Bank B would be 1)*/ + + P0.L = LO(DMEM_CONTROL); + P0.H = HI(DMEM_CONTROL); + + R3 = [P0]; /* If Bank B is not enabled as cache*/ + CC = BITTST(R3, 2); /* then Bank A is our only option.*/ + IF CC JUMP .Lbank_chosen; + + R4 = 1<<14; /* If DCBS==0, use A[14].*/ + R5 = R4 << 7; /* If DCBS==1, use A[23];*/ + CC = BITTST(R3, 4); + IF CC R4 = R5; /* R4 now has either bit 14 or bit 23 set.*/ + R5 = R0 & R4; /* Use it to test the Page address*/ + CC = R5; /* and if that bit is set, we use Bank B,*/ + R2 = CC; /* else we use Bank A.*/ + R2 <<= 23; /* The Bank selection's at posn 23.*/ + +.Lbank_chosen: + + /* We can also determine the sub-bank used, because this is + * taken from bits 13:12 of the address. + */ + + R3 = ((12<<8)|2); /* Extraction pattern */ + nop; /*Anamoly 05000209*/ + R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ + /* Save in extraction pattern for later deposit.*/ + R3.H = R4.L << 0; + + /* So: + * R0 = Page start + * R1 = Page length (actually, offset into size/prefix tables) + * R2 = Bank select mask + * R3 = sub-bank deposit values + * + * The cache has 2 Ways, and 64 sets, so we iterate through + * the sets, accessing the tag for each Way, for our Bank and + * sub-bank, looking for dirty, valid tags that match our + * address prefix. + */ + + P5.L = LO(DTEST_COMMAND); + P5.H = HI(DTEST_COMMAND); + P4.L = LO(DTEST_DATA0); + P4.H = HI(DTEST_DATA0); + + P0.L = page_prefix_table; + P0.H = page_prefix_table; + P1 = R1; + R5 = 0; /* Set counter*/ + P0 = P1 + P0; + R4 = [P0]; /* This is the address prefix*/ + + + /* We're reading (bit 1==0) the tag (bit 2==0), and we + * don't care about which double-word, since we're only + * fetching tags, so we only have to set Set, Bank, + * Sub-bank and Way. + */ + + P2 = 2; + LSETUP (.Lfs1, .Lfe1) LC1 = P2; +.Lfs1: P0 = 64; /* iterate over all sets*/ + LSETUP (.Lfs0, .Lfe0) LC0 = P0; +.Lfs0: R6 = R5 << 5; /* Combine set*/ + R6.H = R3.H << 0 ; /* and sub-bank*/ + R6 = R6 | R2; /* and Bank. Leave Way==0 at first.*/ + BITSET(R6,14); + [P5] = R6; /* Issue Command*/ + SSYNC; + R7 = [P4]; /* and read Tag.*/ + CC = BITTST(R7, 0); /* Check if valid*/ + IF !CC JUMP .Lfskip; /* and skip if not.*/ + CC = BITTST(R7, 1); /* Check if dirty*/ + IF !CC JUMP .Lfskip; /* and skip if not.*/ + + /* Compare against the page address. First, plant bits 13:12 + * into the tag, since those aren't part of the returned data. + */ + + R7 = DEPOSIT(R7, R3); /* set 13:12*/ + R1 = R7 & R4; /* Mask off lower bits*/ + CC = R1 == R0; /* Compare against page start.*/ + IF !CC JUMP .Lfskip; /* Skip it if it doesn't match.*/ + + /* Tag address matches against page, so this is an entry + * we must flush. + */ + + R7 >>= 10; /* Mask off the non-address bits*/ + R7 <<= 10; + P3 = R7; + SSYNC; + FLUSHINV [P3]; /* And flush the entry*/ +.Lfskip: +.Lfe0: R5 += 1; /* Advance to next Set*/ +.Lfe1: BITSET(R2, 26); /* Go to next Way.*/ + +.Ldfinished: + SSYNC; /* Ensure the data gets out to mem.*/ + + /*Finished. Restore context.*/ + LB1 = [SP++]; + LT1 = [SP++]; + LC1 = [SP++]; + LB0 = [SP++]; + LT0 = [SP++]; + LC0 = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; + +.Ldflush_whole_page: + + /* It's a 1K or 4K page, so quicker to just flush the + * entire page. + */ + + P1 = 32; /* For 1K pages*/ + P2 = P1 << 2; /* For 4K pages*/ + P0 = R0; /* Start of page*/ + CC = BITTST(R1, 16); /* Whether 1K or 4K*/ + IF CC P1 = P2; + P1 += -1; /* Unroll one iteration*/ + SSYNC; + FLUSHINV [P0++]; /* because CSYNC can't end loops.*/ + LSETUP (.Leall, .Leall) LC0 = P1; +.Leall: FLUSHINV [P0++]; + SSYNC; + JUMP .Ldfinished; +ENDPROC(_dcplb_flush) + +.align 4; +page_prefix_table: +.byte4 0xFFFFFC00; /* 1K */ +.byte4 0xFFFFF000; /* 4K */ +.byte4 0xFFF00000; /* 1M */ +.byte4 0xFFC00000; /* 4M */ +.page_prefix_table.end: diff --git a/cpu/bf537/i2c.c b/cpu/blackfin/i2c.c index ab7dd38..47be258 100644 --- a/cpu/bf537/i2c.c +++ b/cpu/blackfin/i2c.c @@ -1,18 +1,10 @@ -/**************************************************************** - * $ID: i2c.c 24 Oct 2006 12:00:00 +0800 $ * - * * - * Description: * - * * - * Maintainer: sonicz <sonic.zhang@analog.com> * - * * - * CopyRight (c) 2006 Analog Device * - * All rights reserved. * - * * - * This file is free software; * - * you are free to modify and/or redistribute it * - * under the terms of the GNU General Public Licence (GPL).* - * * - ****************************************************************/ +/* + * i2c.c - driver for Blackfin on-chip TWI/I2C + * + * Copyright (c) 2006-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #include <common.h> @@ -23,10 +15,45 @@ #include <asm/io.h> #include <asm/mach-common/bits/twi.h> -DECLARE_GLOBAL_DATA_PTR; +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#ifdef TWI0_CLKDIV +#define bfin_read_TWI_CLKDIV() bfin_read_TWI0_CLKDIV() +#define bfin_write_TWI_CLKDIV(val) bfin_write_TWI0_CLKDIV(val) +#define bfin_read_TWI_CONTROL() bfin_read_TWI0_CONTROL() +#define bfin_write_TWI_CONTROL(val) bfin_write_TWI0_CONTROL(val) +#define bfin_read_TWI_SLAVE_CTL() bfin_read_TWI0_SLAVE_CTL() +#define bfin_write_TWI_SLAVE_CTL(val) bfin_write_TWI0_SLAVE_CTL(val) +#define bfin_read_TWI_SLAVE_STAT() bfin_read_TWI0_SLAVE_STAT() +#define bfin_write_TWI_SLAVE_STAT(val) bfin_write_TWI0_SLAVE_STAT(val) +#define bfin_read_TWI_SLAVE_ADDR() bfin_read_TWI0_SLAVE_ADDR() +#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write_TWI0_SLAVE_ADDR(val) +#define bfin_read_TWI_MASTER_CTL() bfin_read_TWI0_MASTER_CTL() +#define bfin_write_TWI_MASTER_CTL(val) bfin_write_TWI0_MASTER_CTL(val) +#define bfin_read_TWI_MASTER_STAT() bfin_read_TWI0_MASTER_STAT() +#define bfin_write_TWI_MASTER_STAT(val) bfin_write_TWI0_MASTER_STAT(val) +#define bfin_read_TWI_MASTER_ADDR() bfin_read_TWI0_MASTER_ADDR() +#define bfin_write_TWI_MASTER_ADDR(val) bfin_write_TWI0_MASTER_ADDR(val) +#define bfin_read_TWI_INT_STAT() bfin_read_TWI0_INT_STAT() +#define bfin_write_TWI_INT_STAT(val) bfin_write_TWI0_INT_STAT(val) +#define bfin_read_TWI_INT_MASK() bfin_read_TWI0_INT_MASK() +#define bfin_write_TWI_INT_MASK(val) bfin_write_TWI0_INT_MASK(val) +#define bfin_read_TWI_FIFO_CTL() bfin_read_TWI0_FIFO_CTL() +#define bfin_write_TWI_FIFO_CTL(val) bfin_write_TWI0_FIFO_CTL(val) +#define bfin_read_TWI_FIFO_STAT() bfin_read_TWI0_FIFO_STAT() +#define bfin_write_TWI_FIFO_STAT(val) bfin_write_TWI0_FIFO_STAT(val) +#define bfin_read_TWI_XMT_DATA8() bfin_read_TWI0_XMT_DATA8() +#define bfin_write_TWI_XMT_DATA8(val) bfin_write_TWI0_XMT_DATA8(val) +#define bfin_read_TWI_XMT_DATA_16() bfin_read_TWI0_XMT_DATA16() +#define bfin_write_TWI_XMT_DATA16(val) bfin_write_TWI0_XMT_DATA16(val) +#define bfin_read_TWI_RCV_DATA8() bfin_read_TWI0_RCV_DATA8() +#define bfin_write_TWI_RCV_DATA8(val) bfin_write_TWI0_RCV_DATA8(val) +#define bfin_read_TWI_RCV_DATA16() bfin_read_TWI0_RCV_DATA16() +#define bfin_write_TWI_RCV_DATA16(val) bfin_write_TWI0_RCV_DATA16(val) +#endif #ifdef DEBUG_I2C #define PRINTD(fmt,args...) do { \ + DECLARE_GLOBAL_DATA_PTR; \ if (gd->have_console) \ printf(fmt ,##args); \ } while (0) @@ -50,14 +77,12 @@ struct i2c_msg { /** * i2c_reset: - reset the host controller - * */ - static void i2c_reset(void) { /* Disable TWI */ bfin_write_TWI_CONTROL(0); - sync(); + SSYNC(); /* Set TWI internal clock as 10MHz */ bfin_write_TWI_CONTROL(((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F); @@ -74,7 +99,7 @@ static void i2c_reset(void) /* Enable TWI */ bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA); - sync(); + SSYNC(); } int wait_for_completion(struct i2c_msg *msg, int timeout_count) @@ -95,10 +120,10 @@ int wait_for_completion(struct i2c_msg *msg, int timeout_count) } else if (msg->flags & I2C_M_STOP) bfin_write_TWI_MASTER_CTL (bfin_read_TWI_MASTER_CTL() | STOP); - sync(); + SSYNC(); /* Clear status */ bfin_write_TWI_INT_STAT(XMTSERV); - sync(); + SSYNC(); i = 0; } if (RCVSERV & twi_int_stat) { @@ -109,11 +134,11 @@ int wait_for_completion(struct i2c_msg *msg, int timeout_count) } else if (msg->flags & I2C_M_STOP) { bfin_write_TWI_MASTER_CTL (bfin_read_TWI_MASTER_CTL() | STOP); - sync(); + SSYNC(); } /* Clear interrupt source */ bfin_write_TWI_INT_STAT(RCVSERV); - sync(); + SSYNC(); i = 0; } if (MERR & twi_int_stat) { @@ -121,7 +146,7 @@ int wait_for_completion(struct i2c_msg *msg, int timeout_count) bfin_write_TWI_INT_MASK(0); bfin_write_TWI_MASTER_STAT(0x3e); bfin_write_TWI_MASTER_CTL(0); - sync(); + SSYNC(); /* * if both err and complete int stats are set, * return proper results. @@ -130,7 +155,7 @@ int wait_for_completion(struct i2c_msg *msg, int timeout_count) bfin_write_TWI_INT_STAT(MCOMP); bfin_write_TWI_INT_MASK(0); bfin_write_TWI_MASTER_CTL(0); - sync(); + SSYNC(); /* * If it is a quick transfer, * only address bug no data, not an err. @@ -150,10 +175,10 @@ int wait_for_completion(struct i2c_msg *msg, int timeout_count) } if (MCOMP & twi_int_stat) { bfin_write_TWI_INT_STAT(MCOMP); - sync(); + SSYNC(); bfin_write_TWI_INT_MASK(0); bfin_write_TWI_MASTER_CTL(0); - sync(); + SSYNC(); return 0; } } @@ -187,7 +212,8 @@ int i2c_transfer(struct i2c_msg *msg) goto transfer_error; } - while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) ; + while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) + continue; /* Set Transmit device address */ bfin_write_TWI_MASTER_ADDR(msg->addr); @@ -197,9 +223,9 @@ int i2c_transfer(struct i2c_msg *msg) * Data in FIFO should be discarded before start a new operation. */ bfin_write_TWI_FIFO_CTL(0x3); - sync(); + SSYNC(); bfin_write_TWI_FIFO_CTL(0); - sync(); + SSYNC(); if (!(msg->flags & I2C_M_RD)) { /* Transmit first data */ @@ -208,7 +234,7 @@ int i2c_transfer(struct i2c_msg *msg) len); bfin_write_TWI_XMT_DATA8(*(msg->buf++)); msg->len--; - sync(); + SSYNC(); } } @@ -218,7 +244,7 @@ int i2c_transfer(struct i2c_msg *msg) /* Interrupt mask . Enable XMT, RCV interrupt */ bfin_write_TWI_INT_MASK(MCOMP | MERR | ((msg->flags & I2C_M_RD) ? RCVSERV : XMTSERV)); - sync(); + SSYNC(); if (len > 0 && len <= 255) bfin_write_TWI_MASTER_CTL((len << 6)); @@ -233,12 +259,12 @@ int i2c_transfer(struct i2c_msg *msg) ((msg->flags & I2C_M_RD) ? MDIR : 0) | ((CONFIG_TWICLK_KHZ > 100) ? FAST : 0)); - sync(); + SSYNC(); ret = wait_for_completion(msg, timeout_count); PRINTD("3 in i2c_transfer: ret=%d\n", ret); -transfer_error: + transfer_error: switch (ret) { case 1: PRINTD(("i2c_transfer: error: transfer fail\n")); @@ -415,4 +441,4 @@ void i2c_reg_write(uchar chip, uchar reg, uchar val) i2c_write(chip, reg, 0, &val, 1); } -#endif /* CONFIG_HARD_I2C */ +#endif /* CONFIG_HARD_I2C */ diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c new file mode 100644 index 0000000..ffc8420 --- /dev/null +++ b/cpu/blackfin/initcode.c @@ -0,0 +1,353 @@ +/* + * initcode.c - Initialize the processor. This is usually entails things + * like external memory, voltage regulators, etc... Note that this file + * cannot make any function calls as it may be executed all by itself by + * the Blackfin's bootrom in LDR format. + * + * Copyright (c) 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <config.h> +#include <asm/blackfin.h> +#include <asm/mach-common/bits/bootrom.h> +#include <asm/mach-common/bits/ebiu.h> +#include <asm/mach-common/bits/pll.h> +#include <asm/mach-common/bits/uart.h> + +#define BFIN_IN_INITCODE +#include "serial.h" + +__attribute__((always_inline)) +static inline uint32_t serial_init(void) +{ +#ifdef __ADSPBF54x__ +# ifdef BFIN_BOOT_UART_USE_RTS +# define BFIN_UART_USE_RTS 1 +# else +# define BFIN_UART_USE_RTS 0 +# endif + if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { + size_t i; + + /* force RTS rather than relying on auto RTS */ + bfin_write_UART1_MCR(bfin_read_UART1_MCR() | FCPOL); + + /* Wait for the line to clear up. We cannot rely on UART + * registers as none of them reflect the status of the RSR. + * Instead, we'll sleep for ~10 bit times at 9600 baud. + * We can precalc things here by assuming boot values for + * PLL rather than loading registers and calculating. + * baud = SCLK / (16 ^ (1 - EDBO) * Divisor) + * EDB0 = 0 + * Divisor = (SCLK / baud) / 16 + * SCLK = baud * 16 * Divisor + * SCLK = (0x14 * CONFIG_CLKIN_HZ) / 5 + * CCLK = (16 * Divisor * 5) * (9600 / 10) + * In reality, this will probably be just about 1 second delay, + * so assuming 9600 baud is OK (both as a very low and too high + * speed as this will buffer things enough). + */ +#define _NUMBITS (10) /* how many bits to delay */ +#define _LOWBAUD (9600) /* low baud rate */ +#define _SCLK ((0x14 * CONFIG_CLKIN_HZ) / 5) /* SCLK based on PLL */ +#define _DIVISOR ((_SCLK / _LOWBAUD) / 16) /* UART DLL/DLH */ +#define _NUMINS (3) /* how many instructions in loop */ +#define _CCLK (((16 * _DIVISOR * 5) * (_LOWBAUD / _NUMBITS)) / _NUMINS) + i = _CCLK; + while (i--) + asm volatile("" : : : "memory"); + } +#endif + + uint32_t old_baud = serial_early_get_baud(); + + if (BFIN_DEBUG_EARLY_SERIAL) { + serial_early_init(); + + /* If the UART is off, that means we need to program + * the baud rate ourselves initially. + */ + if (!old_baud) { + old_baud = CONFIG_BAUDRATE; + serial_early_set_baud(CONFIG_BAUDRATE); + } + } + + return old_baud; +} + +__attribute__((always_inline)) +static inline void serial_deinit(void) +{ +#ifdef __ADSPBF54x__ + if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { + /* clear forced RTS rather than relying on auto RTS */ + bfin_write_UART1_MCR(bfin_read_UART1_MCR() & ~FCPOL); + } +#endif +} + +/* We need to reset the baud rate when we have early debug turned on + * or when we are booting over the UART. + * XXX: we should fix this to calc the old baud and restore it rather + * than hardcoding it via CONFIG_LDR_LOAD_BAUD ... but we have + * to figure out how to avoid the division in the baud calc ... + */ +__attribute__((always_inline)) +static inline void serial_reset_baud(uint32_t baud) +{ + if (!BFIN_DEBUG_EARLY_SERIAL && CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART) + return; + +#ifndef CONFIG_LDR_LOAD_BAUD +# define CONFIG_LDR_LOAD_BAUD 115200 +#endif + + if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) + serial_early_set_baud(baud); + else if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) + serial_early_set_baud(CONFIG_LDR_LOAD_BAUD); + else + serial_early_set_baud(CONFIG_BAUDRATE); +} + +__attribute__((always_inline)) +static inline void serial_putc(char c) +{ + if (!BFIN_DEBUG_EARLY_SERIAL) + return; + + if (c == '\n') + *pUART_THR = '\r'; + + *pUART_THR = c; + + while (!(*pUART_LSR & TEMT)) + continue; +} + + +/* Max SCLK can be 133MHz ... dividing that by 4 gives + * us a freq of 33MHz for SPI which should generally be + * slow enough for the slow reads the bootrom uses. + */ +#ifndef CONFIG_SPI_BAUD_INITBLOCK +# define CONFIG_SPI_BAUD_INITBLOCK 4 +#endif + +/* PLL_DIV defines */ +#ifndef CONFIG_PLL_DIV_VAL +# if (CONFIG_CCLK_DIV == 1) +# define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +# elif (CONFIG_CCLK_DIV == 2) +# define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +# elif (CONFIG_CCLK_DIV == 4) +# define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +# elif (CONFIG_CCLK_DIV == 8) +# define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +# else +# define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +# endif +# define CONFIG_PLL_DIV_VAL (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV) +#endif + +#ifndef CONFIG_PLL_LOCKCNT_VAL +# define CONFIG_PLL_LOCKCNT_VAL 0x0300 +#endif + +#ifndef CONFIG_PLL_CTL_VAL +# define CONFIG_PLL_CTL_VAL (SPORT_HYST | (CONFIG_VCO_MULT << 9)) +#endif + +#ifndef CONFIG_EBIU_RSTCTL_VAL +# define CONFIG_EBIU_RSTCTL_VAL 0 /* only MDDRENABLE is useful */ +#endif + +#ifndef CONFIG_EBIU_MBSCTL_VAL +# define CONFIG_EBIU_MBSCTL_VAL 0 +#endif + +/* Make sure our voltage value is sane so we don't blow up! */ +#ifndef CONFIG_VR_CTL_VAL +# define BFIN_CCLK ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_CCLK_DIV) +# if defined(__ADSPBF533__) || defined(__ADSPBF532__) || defined(__ADSPBF531__) +# define CCLK_VLEV_120 400000000 +# define CCLK_VLEV_125 533000000 +# elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) +# define CCLK_VLEV_120 401000000 +# define CCLK_VLEV_125 401000000 +# elif defined(__ADSPBF561__) +# define CCLK_VLEV_120 300000000 +# define CCLK_VLEV_125 501000000 +# endif +# if BFIN_CCLK < CCLK_VLEV_120 +# define CONFIG_VR_CTL_VLEV VLEV_120 +# elif BFIN_CCLK < CCLK_VLEV_125 +# define CONFIG_VR_CTL_VLEV VLEV_125 +# else +# define CONFIG_VR_CTL_VLEV VLEV_130 +# endif +# if defined(__ADSPBF52x__) /* TBD; use default */ +# undef CONFIG_VR_CTL_VLEV +# define CONFIG_VR_CTL_VLEV VLEV_110 +# elif defined(__ADSPBF54x__) /* TBD; use default */ +# undef CONFIG_VR_CTL_VLEV +# define CONFIG_VR_CTL_VLEV VLEV_120 +# endif + +# ifdef CONFIG_BFIN_MAC +# define CONFIG_VR_CTL_CLKBUF CLKBUFOE +# else +# define CONFIG_VR_CTL_CLKBUF 0 +# endif + +# if defined(__ADSPBF52x__) +# define CONFIG_VR_CTL_FREQ FREQ_1000 +# else +# define CONFIG_VR_CTL_FREQ (GAIN_20 | FREQ_1000) +# endif + +# define CONFIG_VR_CTL_VAL (CONFIG_VR_CTL_CLKBUF | CONFIG_VR_CTL_VLEV | CONFIG_VR_CTL_FREQ) +#endif + +__attribute__((saveall)) +void initcode(ADI_BOOT_DATA *bootstruct) +{ + uint32_t old_baud = serial_init(); + +#ifdef CONFIG_HW_WATCHDOG +# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE +# define CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE 20000 +# endif + /* Program the watchdog with an initial timeout of ~20 seconds. + * Hopefully that should be long enough to load the u-boot LDR + * (from wherever) and then the common u-boot code can take over. + * In bypass mode, the start.S would have already set a much lower + * timeout, so don't clobber that. + */ + if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) { + bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE)); + bfin_write_WDOG_CTL(0); + } +#endif + + serial_putc('S'); + + /* Blackfin bootroms use the SPI slow read opcode instead of the SPI + * fast read, so we need to slow down the SPI clock a lot more during + * boot. Once we switch over to u-boot's SPI flash driver, we'll + * increase the speed appropriately. + */ + if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) +#ifdef SPI0_BAUD + bfin_write_SPI0_BAUD(CONFIG_SPI_BAUD_INITBLOCK); +#else + bfin_write_SPI_BAUD(CONFIG_SPI_BAUD_INITBLOCK); +#endif + + serial_putc('B'); + + /* Disable all peripheral wakeups except for the PLL event. */ +#ifdef SIC_IWR0 + bfin_write_SIC_IWR0(1); + bfin_write_SIC_IWR1(0); +# ifdef SIC_IWR2 + bfin_write_SIC_IWR2(0); +# endif +#elif defined(SICA_IWR0) + bfin_write_SICA_IWR0(1); + bfin_write_SICA_IWR1(0); +#else + bfin_write_SIC_IWR(1); +#endif + + serial_putc('L'); + + bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL); + + serial_putc('A'); + + /* Only reprogram when needed to avoid triggering unnecessary + * PLL relock sequences. + */ + if (bfin_read_VR_CTL() != CONFIG_VR_CTL_VAL) { + serial_putc('!'); + bfin_write_VR_CTL(CONFIG_VR_CTL_VAL); + asm("idle;"); + } + + serial_putc('C'); + + bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL); + + serial_putc('K'); + + /* Only reprogram when needed to avoid triggering unnecessary + * PLL relock sequences. + */ + if (bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) { + serial_putc('!'); + bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL); + asm("idle;"); + } + + /* Since we've changed the SCLK above, we may need to update + * the UART divisors (UART baud rates are based on SCLK). + */ + serial_reset_baud(old_baud); + + serial_putc('F'); + + /* Program the async banks controller. */ + bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL); + bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL); + bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); + +#ifdef EBIU_MODE + /* Not all parts have these additional MMRs. */ + bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL); + bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL); + bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL); +#endif + + serial_putc('I'); + + /* Program the external memory controller. */ +#ifdef EBIU_RSTCTL + bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1 /*DDRSRESET*/ | CONFIG_EBIU_RSTCTL_VAL); + bfin_write_EBIU_DDRCTL0(CONFIG_EBIU_DDRCTL0_VAL); + bfin_write_EBIU_DDRCTL1(CONFIG_EBIU_DDRCTL1_VAL); + bfin_write_EBIU_DDRCTL2(CONFIG_EBIU_DDRCTL2_VAL); +# ifdef CONFIG_EBIU_DDRCTL3_VAL + /* default is disable, so don't need to force this */ + bfin_write_EBIU_DDRCTL3(CONFIG_EBIU_DDRCTL3_VAL); +# endif +#else + bfin_write_EBIU_SDRRC(CONFIG_EBIU_SDRRC_VAL); + bfin_write_EBIU_SDBCTL(CONFIG_EBIU_SDBCTL_VAL); + bfin_write_EBIU_SDGCTL(CONFIG_EBIU_SDGCTL_VAL); +#endif + + serial_putc('N'); + + /* Restore all peripheral wakeups. */ +#ifdef SIC_IWR0 + bfin_write_SIC_IWR0(-1); + bfin_write_SIC_IWR1(-1); +# ifdef SIC_IWR2 + bfin_write_SIC_IWR2(-1); +# endif +#elif defined(SICA_IWR0) + bfin_write_SICA_IWR0(-1); + bfin_write_SICA_IWR1(-1); +#else + bfin_write_SIC_IWR(-1); +#endif + + serial_putc('>'); + serial_putc('\n'); + + serial_deinit(); +} diff --git a/cpu/blackfin/interrupt.S b/cpu/blackfin/interrupt.S new file mode 100644 index 0000000..dd2cc53 --- /dev/null +++ b/cpu/blackfin/interrupt.S @@ -0,0 +1,33 @@ +/* + * interrupt.S - trampoline default exceptions/interrupts to C handlers + * + * Copyright (c) 2005-2007 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include <asm/blackfin.h> +#include <asm/entry.h> + +.text + +/* default entry point for exceptions */ +ENTRY(_trap) + SAVE_ALL_SYS + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + sp += -12; + call _trap_c; + sp += 12; + RESTORE_ALL_SYS + rtx; +ENDPROC(_trap) + +/* default entry point for interrupts */ +ENTRY(_evt_default) + SAVE_ALL_SYS + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + sp += -12; + call _bfin_panic; + sp += 12; + RESTORE_ALL_SYS + rti; +ENDPROC(_evt_default) diff --git a/cpu/bf561/interrupts.c b/cpu/blackfin/interrupts.c index 7880061..80c5505 100644 --- a/cpu/bf561/interrupts.c +++ b/cpu/blackfin/interrupts.c @@ -1,7 +1,7 @@ /* * U-boot - interrupts.c Interrupt related routines * - * Copyright (c) 2005-2007 Analog Devices Inc. + * Copyright (c) 2005-2008 Analog Devices Inc. * * This file is based on interrupts.c * Copyright 1996 Roman Zippel @@ -14,24 +14,8 @@ * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <common.h> @@ -49,7 +33,7 @@ int irq_flags; /* needed by asm-blackfin/system.h */ /* * This function is derived from PowerPC code (read timebase as long long). - * On BF561 it just returns the timer value. + * On Blackfin it just returns the timer value. */ unsigned long long get_ticks(void) { @@ -58,7 +42,7 @@ unsigned long long get_ticks(void) /* * This function is derived from PowerPC code (timebase clock frequency). - * On BF561 it returns the number of timer ticks per second. + * On Blackfin it returns the number of timer ticks per second. */ ulong get_tbclk(void) { @@ -70,18 +54,15 @@ ulong get_tbclk(void) void enable_interrupts(void) { + local_irq_restore(int_flag); } int disable_interrupts(void) { + local_irq_save(int_flag); return 1; } -int interrupt_init(void) -{ - return (0); -} - void udelay(unsigned long usec) { unsigned long delay, start, stop; @@ -101,16 +82,17 @@ void udelay(unsigned long usec) usec -= 1000; } - asm volatile (" %0 = CYCLES;":"=r" (start)); + asm volatile (" %0 = CYCLES;" : "=r" (start)); do { - asm volatile (" %0 = CYCLES; ":"=r" (stop)); + asm volatile (" %0 = CYCLES; " : "=r" (stop)); } while (stop - start < delay); } return; } -void timer_init(void) +#define MAX_TIM_LOAD 0xFFFFFFFF +int timer_init(void) { *pTCNTL = 0x1; *pTSCALE = 0x0; @@ -121,6 +103,8 @@ void timer_init(void) timestamp = 0; last_time = 0; + + return 0; } /* @@ -157,11 +141,15 @@ ulong get_timer(ulong base) milisec = clocks / (CONFIG_CCLK_HZ / 1000); /* - * Find the number of millisonds - * that got elapsed before this TCOUNT - * cycle + * Find the number of millisonds that + * got elapsed before this TCOUNT cycle */ milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000)); return (milisec - base); } + +void reset_timer(void) +{ + timestamp = 0; +} diff --git a/cpu/blackfin/reset.c b/cpu/blackfin/reset.c new file mode 100644 index 0000000..d1e34b3 --- /dev/null +++ b/cpu/blackfin/reset.c @@ -0,0 +1,96 @@ +/* + * reset.c - logic for resetting the cpu + * + * Copyright (c) 2005-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <command.h> +#include <asm/blackfin.h> +#include "cpu.h" + +/* A system soft reset makes external memory unusable so force + * this function into L1. We use the compiler ssync here rather + * than SSYNC() because it's safe (no interrupts and such) and + * we save some L1. We do not need to force sanity in the SYSCR + * register as the BMODE selection bit is cleared by the soft + * reset while the Core B bit (on dual core parts) is cleared by + * the core reset. + */ +__attribute__ ((__l1_text__, __noreturn__)) +void bfin_reset(void) +{ + /* Wait for completion of "system" events such as cache line + * line fills so that we avoid infinite stalls later on as + * much as possible. This code is in L1, so it won't trigger + * any such event after this point in time. + */ + __builtin_bfin_ssync(); + + while (1) { + /* Initiate System software reset. */ + bfin_write_SWRST(0x7); + + /* Due to the way reset is handled in the hardware, we need + * to delay for 7 SCLKS. The only reliable way to do this is + * to calculate the CCLK/SCLK ratio and multiply 7. For now, + * we'll assume worse case which is a 1:15 ratio. + */ + asm( + "LSETUP (1f, 1f) LC0 = %0\n" + "1: nop;" + : + : "a" (15 * 7) + : "LC0", "LB0", "LT0" + ); + + /* Clear System software reset */ + bfin_write_SWRST(0); + + /* Wait for the SWRST write to complete. Cannot rely on SSYNC + * though as the System state is all reset now. + */ + asm( + "LSETUP (1f, 1f) LC1 = %0\n" + "1: nop;" + : + : "a" (15 * 1) + : "LC1", "LB1", "LT1" + ); + + /* Issue core reset */ + asm("raise 1"); + } +} + +/* We need to trampoline ourselves up into L1 since our linker + * does not have relaxtion support and will only generate a + * PC relative call with a 25 bit immediate. This is not enough + * to get us from the top of SDRAM into L1. + */ +__attribute__ ((__noreturn__)) +static inline void bfin_reset_trampoline(void) +{ + if (board_reset) + board_reset(); + while (1) + asm("jump (%0);" : : "a" (bfin_reset)); +} + +__attribute__ ((__noreturn__)) +void bfin_reset_or_hang(void) +{ +#ifdef CONFIG_PANIC_HANG + hang(); +#else + bfin_reset_trampoline(); +#endif +} + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + bfin_reset_trampoline(); + return 0; +} diff --git a/cpu/blackfin/serial.c b/cpu/blackfin/serial.c new file mode 100644 index 0000000..0dfee51 --- /dev/null +++ b/cpu/blackfin/serial.c @@ -0,0 +1,124 @@ +/* + * U-boot - serial.c Blackfin Serial Driver + * + * Copyright (c) 2005-2008 Analog Devices Inc. + * + * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>, + * BuyWays B.V. (www.buyways.nl) + * + * Based heavily on: + * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs. + * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com> + * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com> + * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com> + * + * Based on code from 68328 version serial driver imlpementation which was: + * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> + * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> + * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> + * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <watchdog.h> +#include <asm/blackfin.h> +#include <asm/mach-common/bits/uart.h> + +#if defined(UART_LSR) && (CONFIG_UART_CONSOLE != 0) +# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART +#endif + +#include "serial.h" + +/* Symbol for our assembly to call. */ +void serial_set_baud(uint32_t baud) +{ + serial_early_set_baud(baud); +} + +/* Symbol for common u-boot code to call. + * Setup the baudrate (brg: baudrate generator). + */ +void serial_setbrg(void) +{ + DECLARE_GLOBAL_DATA_PTR; + serial_set_baud(gd->baudrate); +} + +/* Symbol for our assembly to call. */ +void serial_initialize(void) +{ + serial_early_init(); +} + +/* Symbol for common u-boot code to call. */ +int serial_init(void) +{ + serial_initialize(); + serial_setbrg(); + return 0; +} + +void serial_putc(const char c) +{ + /* send a \r for compatibility */ + if (c == '\n') + serial_putc('\r'); + + WATCHDOG_RESET(); + + /* wait for the hardware fifo to clear up */ + while (!(*pUART_LSR & THRE)) + continue; + + /* queue the character for transmission */ + *pUART_THR = c; + SSYNC(); + + WATCHDOG_RESET(); + + /* wait for the byte to be shifted over the line */ + while (!(*pUART_LSR & TEMT)) + continue; +} + +int serial_tstc(void) +{ + WATCHDOG_RESET(); + return (*pUART_LSR & DR) ? 1 : 0; +} + +int serial_getc(void) +{ + uint16_t uart_lsr_val, uart_rbr_val; + + /* wait for data ! */ + while (!serial_tstc()) + continue; + + /* clear the status and grab the new byte */ + uart_lsr_val = *pUART_LSR; + uart_rbr_val = *pUART_RBR; + + if (uart_lsr_val & (OE|PE|FE|BI)) { + /* Some parts are read-to-clear while others are + * write-to-clear. Just do the write for everyone + * since it cant hurt (other than code size). + */ + *pUART_LSR = (OE|PE|FE|BI); + return -1; + } + + return uart_rbr_val & 0xFF; +} + +void serial_puts(const char *s) +{ + while (*s) + serial_putc(*s++); +} diff --git a/cpu/blackfin/serial.h b/cpu/blackfin/serial.h new file mode 100644 index 0000000..1f0f4b4 --- /dev/null +++ b/cpu/blackfin/serial.h @@ -0,0 +1,275 @@ +/* + * serial.h - common serial defines for early debug and serial driver. + * any functions defined here must be always_inline since + * initcode cannot have function calls. + * + * Copyright (c) 2004-2007 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_CPU_SERIAL_H__ +#define __BFIN_CPU_SERIAL_H__ + +#include <asm/blackfin.h> +#include <asm/mach-common/bits/uart.h> + +#ifdef CONFIG_DEBUG_EARLY_SERIAL +# define BFIN_DEBUG_EARLY_SERIAL 1 +#else +# define BFIN_DEBUG_EARLY_SERIAL 0 +#endif + +#define LOB(x) ((x) & 0xFF) +#define HIB(x) (((x) >> 8) & 0xFF) + +#ifndef UART_LSR +# if (CONFIG_UART_CONSOLE == 3) +# define pUART_DLH pUART3_DLH +# define pUART_DLL pUART3_DLL +# define pUART_GCTL pUART3_GCTL +# define pUART_IER pUART3_IER +# define pUART_IERC pUART3_IER_CLEAR +# define pUART_LCR pUART3_LCR +# define pUART_LSR pUART3_LSR +# define pUART_RBR pUART3_RBR +# define pUART_THR pUART3_THR +# define UART_THR UART3_THR +# define UART_LSR UART3_LSR +# elif (CONFIG_UART_CONSOLE == 2) +# define pUART_DLH pUART2_DLH +# define pUART_DLL pUART2_DLL +# define pUART_GCTL pUART2_GCTL +# define pUART_IER pUART2_IER +# define pUART_IERC pUART2_IER_CLEAR +# define pUART_LCR pUART2_LCR +# define pUART_LSR pUART2_LSR +# define pUART_RBR pUART2_RBR +# define pUART_THR pUART2_THR +# define UART_THR UART2_THR +# define UART_LSR UART2_LSR +# elif (CONFIG_UART_CONSOLE == 1) +# define pUART_DLH pUART1_DLH +# define pUART_DLL pUART1_DLL +# define pUART_GCTL pUART1_GCTL +# define pUART_IER pUART1_IER +# define pUART_IERC pUART1_IER_CLEAR +# define pUART_LCR pUART1_LCR +# define pUART_LSR pUART1_LSR +# define pUART_RBR pUART1_RBR +# define pUART_THR pUART1_THR +# define UART_THR UART1_THR +# define UART_LSR UART1_LSR +# elif (CONFIG_UART_CONSOLE == 0) +# define pUART_DLH pUART0_DLH +# define pUART_DLL pUART0_DLL +# define pUART_GCTL pUART0_GCTL +# define pUART_IER pUART0_IER +# define pUART_IERC pUART0_IER_CLEAR +# define pUART_LCR pUART0_LCR +# define pUART_LSR pUART0_LSR +# define pUART_RBR pUART0_RBR +# define pUART_THR pUART0_THR +# define UART_THR UART0_THR +# define UART_LSR UART0_LSR +# endif +#endif + +#ifndef __ASSEMBLY__ + +/* We cannot use get_sclk() in initcode as it is defined elsewhere. */ +#ifdef BFIN_IN_INITCODE +# define get_sclk() (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV) +#endif + +#ifdef __ADSPBF54x__ +# define ACCESS_LATCH() +# define ACCESS_PORT_IER() +# define CLEAR_IER() (*pUART_IERC = 0) +#else +# define ACCESS_LATCH() (*pUART_LCR |= DLAB) +# define ACCESS_PORT_IER() (*pUART_LCR &= ~DLAB) +# define CLEAR_IER() (*pUART_IER = 0) +#endif + +__attribute__((always_inline)) +static inline void serial_do_portmux(void) +{ +#ifdef __ADSPBF52x__ +# define DO_MUX(port, mux, tx, rx) \ + bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_3); \ + bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); + switch (CONFIG_UART_CONSOLE) { + case 0: DO_MUX(G, 2, 7, 8); break; /* Port G; mux 2; PG2 and PG8 */ + case 1: DO_MUX(F, 5, 14, 15); break; /* Port F; mux 5; PF14 and PF15 */ + } + SSYNC(); +#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) +# define DO_MUX(func, tx, rx) \ + bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~(func)); \ + bfin_write_PORTF_FER(bfin_read_PORTF_FER() | PF##tx | PF##rx); + switch (CONFIG_UART_CONSOLE) { + case 0: DO_MUX(PFDE, 0, 1); break; + case 1: DO_MUX(PFTE, 2, 3); break; + } + SSYNC(); +#elif defined(__ADSPBF54x__) +# define DO_MUX(port, tx, rx) \ + bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##tx##_MASK | PORT_x_MUX_##rx##_MASK)) | PORT_x_MUX_##tx##_FUNC_1 | PORT_x_MUX_##rx##_FUNC_1); \ + bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); + switch (CONFIG_UART_CONSOLE) { + case 0: DO_MUX(E, 7, 8); break; /* Port E; PE7 and PE8 */ + case 1: DO_MUX(H, 0, 1); break; /* Port H; PH0 and PH1 */ + case 2: DO_MUX(B, 4, 5); break; /* Port B; PB4 and PB5 */ + case 3: DO_MUX(B, 6, 7); break; /* Port B; PB6 and PB7 */ + } + SSYNC(); +#endif +} + +__attribute__((always_inline)) +static inline void serial_early_init(void) +{ + /* handle portmux crap on different Blackfins */ + serial_do_portmux(); + + /* Enable UART */ + *pUART_GCTL = UCEN; + + /* Set LCR to Word Lengh 8-bit word select */ + *pUART_LCR = WLS_8; + + SSYNC(); +} + +__attribute__((always_inline)) +static inline uint32_t serial_early_get_baud(void) +{ + /* If the UART isnt enabled, then we are booting an LDR + * from a non-UART source (so like flash) which means + * the baud rate here is meaningless. + */ + if ((*pUART_GCTL & UCEN) != UCEN) + return 0; + +#if (0) /* See comment for serial_reset_baud() in initcode.c */ + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); + + uint8_t dll = *pUART_DLL; + uint8_t dlh = *pUART_DLH; + uint16_t divisor = (dlh << 8) | dll; + uint32_t baud = get_sclk() / (divisor * 16); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); + + return baud; +#else + return CONFIG_BAUDRATE; +#endif +} + +__attribute__((always_inline)) +static inline void serial_early_set_baud(uint32_t baud) +{ + /* Translate from baud into divisor in terms of SCLK. + * The +1 is to make sure we over sample just a little + * rather than under sample the incoming signals. + */ + uint16_t divisor = (get_sclk() / (baud * 16)) + 1; + + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); + + /* Program the divisor to get the baud rate we want */ + *pUART_DLL = LOB(divisor); + *pUART_DLH = HIB(divisor); + SSYNC(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); +} + +#ifndef BFIN_IN_INITCODE +__attribute__((always_inline)) +static inline void serial_early_puts(const char *s) +{ + if (BFIN_DEBUG_EARLY_SERIAL) { + serial_puts("Early: "); + serial_puts(s); + } +} +#endif + +#else + +.macro serial_early_init +#ifdef CONFIG_DEBUG_EARLY_SERIAL + call _serial_initialize; +#endif +.endm + +.macro serial_early_set_baud +#ifdef CONFIG_DEBUG_EARLY_SERIAL + R0.L = LO(CONFIG_BAUDRATE); + R0.H = HI(CONFIG_BAUDRATE); + call _serial_set_baud; +#endif +.endm + +/* Recursively expand calls to _serial_putc for every byte + * passed to us. Append a newline when we're all done. + */ +.macro _serial_early_putc byte:req morebytes:vararg +#ifdef CONFIG_DEBUG_EARLY_SERIAL + R0 = \byte; + call _serial_putc; +.ifnb \morebytes + _serial_early_putc \morebytes +.else +.if (\byte != '\n') + _serial_early_putc '\n' +.endif +.endif +#endif +.endm + +/* Wrapper around recurisve _serial_early_putc macro which + * simply prepends the string "Early: " + */ +.macro serial_early_putc byte:req morebytes:vararg +#ifdef CONFIG_DEBUG_EARLY_SERIAL + _serial_early_putc 'E', 'a', 'r', 'l', 'y', ':', ' ', \byte, \morebytes +#endif +.endm + +/* Since we embed the string right into our .text section, we need + * to find its address. We do this by getting our PC and adding 2 + * bytes (which is the length of the jump instruction). Then we + * pass this address to serial_puts(). + */ +#ifdef CONFIG_DEBUG_EARLY_SERIAL +# define serial_early_puts(str) \ + call _get_pc; \ + jump 1f; \ + .ascii "Early:"; \ + .ascii __FILE__; \ + .ascii ": "; \ + .ascii str; \ + .asciz "\n"; \ + .align 4; \ +1: \ + R0 += 2; \ + call _serial_puts; +#else +# define serial_early_puts(str) +#endif + +#endif + +#endif diff --git a/cpu/blackfin/start.S b/cpu/blackfin/start.S new file mode 100644 index 0000000..30212e9 --- /dev/null +++ b/cpu/blackfin/start.S @@ -0,0 +1,219 @@ +/* + * U-boot - start.S Startup file for Blackfin u-boot + * + * Copyright (c) 2005-2007 Analog Devices Inc. + * + * This file is based on head.S + * Copyright (c) 2003 Metrowerks/Motorola + * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, + * Kenneth Albanowski <kjahds@kjahds.com>, + * The Silver Hammer Group, Ltd. + * (c) 1995, Dionne & Associates + * (c) 1995, DKG Display Tech. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <config.h> +#include <asm/blackfin.h> +#include <asm/mach-common/bits/core.h> +#include <asm/mach-common/bits/dma.h> +#include <asm/mach-common/bits/pll.h> + +#include "serial.h" + +/* It may seem odd that we make calls to functions even though we haven't + * relocated ourselves yet out of {flash,ram,wherever}. This is OK because + * the "call" instruction in the Blackfin architecture is actually PC + * relative. So we can call functions all we want and not worry about them + * not being relocated yet. + */ + +.text +ENTRY(_start) + + /* Set our initial stack to L1 scratch space */ + sp.l = LO(L1_SRAM_SCRATCH + L1_SRAM_SCRATCH_SIZE); + sp.h = HI(L1_SRAM_SCRATCH + L1_SRAM_SCRATCH_SIZE); + +#ifdef CONFIG_HW_WATCHDOG +# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START +# define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000 +# endif + /* Program the watchdog with an initial timeout of ~5 seconds. + * That should be long enough to bootstrap ourselves up and + * then the common u-boot code can take over. + */ + P0.L = LO(WDOG_CNT); + P0.H = HI(WDOG_CNT); + R0.L = 0; + R0.H = HI(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_START)); + [P0] = R0; + /* fire up the watchdog - R0.L above needs to be 0x0000 */ + W[P0 + (WDOG_CTL - WDOG_CNT)] = R0; +#endif + + /* Turn on the serial for debugging the init process */ + serial_early_init + serial_early_set_baud + + serial_early_puts("Init Registers"); + + /* Disable nested interrupts and enable CYCLES for udelay() */ + R0 = CCEN | 0x30; + SYSCFG = R0; + + /* Zero out registers required by Blackfin ABI. + * http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface + */ + r1 = 0 (x); + /* Disable circular buffers */ + l0 = r1; + l1 = r1; + l2 = r1; + l3 = r1; + /* Disable hardware loops in case we were started by 'go' */ + lc0 = r1; + lc1 = r1; + + /* Save RETX so we can pass it while booting Linux */ + r7 = RETX; + +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) + /* In bypass mode, we don't have an LDR with an init block + * so we need to explicitly call it ourselves. This will + * reprogram our clocks and setup our async banks. + */ + /* XXX: we should DMA this into L1, put external memory into + * self refresh, and then jump there ... + */ + call _get_pc; + r3 = 0x0; + r3.h = 0x2000; + cc = r0 < r3 (iu); + if cc jump .Lproc_initialized; + + serial_early_puts("Program Clocks"); + + call _initcode; + + /* Since we reprogrammed SCLK, we need to update the serial divisor */ + serial_early_set_baud + +.Lproc_initialized: +#endif + + /* Inform upper layers if we had to do the relocation ourselves. + * This allows us to detect whether we were loaded by 'go 0x1000' + * or by the bootrom from an LDR. "r6" is "loaded_from_ldr". + */ + r6 = 1 (x); + + /* Relocate from wherever are (FLASH/RAM/etc...) to the + * hardcoded monitor location in the end of RAM. + */ + serial_early_puts("Relocate"); + call _get_pc; +.Loffset: + r2.l = .Loffset; + r2.h = .Loffset; + r3.l = _start; + r3.h = _start; + r1 = r2 - r3; + + r0 = r0 - r1; + + cc = r0 == r3; + if cc jump .Lnorelocate; + + r6 = 0 (x); + p1 = r0; + + p2.l = LO(CFG_MONITOR_BASE); + p2.h = HI(CFG_MONITOR_BASE); + + p3 = 0x04; + p4.l = LO(CFG_MONITOR_BASE + CFG_MONITOR_LEN); + p4.h = HI(CFG_MONITOR_BASE + CFG_MONITOR_LEN); +.Lloop1: + r1 = [p1 ++ p3]; + [p2 ++ p3] = r1; + cc=p2==p4; + if !cc jump .Lloop1; + + /* Initialize BSS section ... we know that memset() does not + * use the BSS, so it is safe to call here. The bootrom LDR + * takes care of clearing things for us. + */ + serial_early_puts("Zero BSS"); + r0.l = __bss_start; + r0.h = __bss_start; + r1 = 0 (x); + r2.l = __bss_end; + r2.h = __bss_end; + r2 = r2 - r0; + call _memset; + +.Lnorelocate: + + /* Setup the actual stack in external memory */ + r0.h = HI(CONFIG_STACKBASE); + r0.l = LO(CONFIG_STACKBASE); + sp = r0; + fp = sp; + + /* Now lower ourselves from the highest interrupt level to + * the lowest. We do this by masking all interrupts but 15, + * setting the 15 handler to "board_init_f", raising the 15 + * interrupt, and then returning from the highest interrupt + * level to the dummy "jump" until the interrupt controller + * services the pending 15 interrupt. + */ + serial_early_puts("Lower to 15"); + r0 = r7; + r1 = r6; + p0.l = LO(EVT15); + p0.h = HI(EVT15); + p1.l = _cpu_init_f; + p1.h = _cpu_init_f; + [p0] = p1; + p2.l = LO(IMASK); + p2.h = HI(IMASK); + p3.l = LO(EVT_IVG15); + p3.h = HI(EVT_IVG15); + [p2] = p3; + raise 15; + p4.l = .LWAIT_HERE; + p4.h = .LWAIT_HERE; + reti = p4; + rti; + +.LWAIT_HERE: + jump .LWAIT_HERE; +ENDPROC(_start) + +LENTRY(_get_pc) + r0 = rets; +#if ANOMALY_05000371 + NOP; + NOP; + NOP; +#endif + rts; +ENDPROC(_get_pc) diff --git a/cpu/blackfin/system_map.S b/cpu/blackfin/system_map.S new file mode 100644 index 0000000..286d7f3 --- /dev/null +++ b/cpu/blackfin/system_map.S @@ -0,0 +1,18 @@ +/* + * system_map.S - optional symbol lookup for debugging + * + * Copyright (c) 2007 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include <config.h> + +#ifdef CONFIG_DEBUG_DUMP_SYMS +.data +.global _system_map +.type _system_map,@object +_system_map: +#include SYM_FILE +.asciz "" +.size _system_map,.-_system_map +#endif diff --git a/cpu/blackfin/traps.c b/cpu/blackfin/traps.c new file mode 100644 index 0000000..4474fe5 --- /dev/null +++ b/cpu/blackfin/traps.c @@ -0,0 +1,353 @@ +/* + * U-boot - traps.c Routines related to interrupts and exceptions + * + * Copyright (c) 2005-2008 Analog Devices Inc. + * + * This file is based on + * No original Copyright holder listed, + * Probabily original (C) Roman Zippel (assigned DJD, 1999) + * + * Copyright 2003 Metrowerks - for Blackfin + * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca> + * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org> + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <linux/types.h> +#include <asm/traps.h> +#include <asm/cplb.h> +#include <asm/io.h> +#include <asm/mach-common/bits/core.h> +#include <asm/mach-common/bits/mpu.h> +#include <asm/mach-common/bits/trace.h> +#include "cpu.h" + +#define trace_buffer_save(x) \ + do { \ + (x) = bfin_read_TBUFCTL(); \ + bfin_write_TBUFCTL((x) & ~TBUFEN); \ + } while (0) + +#define trace_buffer_restore(x) \ + bfin_write_TBUFCTL((x)) + +/* The purpose of this map is to provide a mapping of address<->cplb settings + * rather than an exact map of what is actually addressable on the part. This + * map covers all current Blackfin parts. If you try to access an address that + * is in this map but not actually on the part, you won't get an exception and + * reboot, you'll get an external hardware addressing error and reboot. Since + * only the ends matter (you did something wrong and the board reset), the means + * are largely irrelevant. + */ +struct memory_map { + uint32_t start, end; + uint32_t data_flags, inst_flags; +}; +const struct memory_map const bfin_memory_map[] = { + { /* external memory */ + .start = 0x00000000, + .end = 0x20000000, + .data_flags = SDRAM_DGENERIC, + .inst_flags = SDRAM_IGENERIC, + }, + { /* async banks */ + .start = 0x20000000, + .end = 0x30000000, + .data_flags = SDRAM_EBIU, + .inst_flags = SDRAM_INON_CHBL, + }, + { /* everything on chip */ + .start = 0xE0000000, + .end = 0xFFFFFFFF, + .data_flags = L1_DMEMORY, + .inst_flags = L1_IMEMORY, + } +}; + +void trap_c(struct pt_regs *regs) +{ + uint32_t trapnr = (regs->seqstat & EXCAUSE); + bool data = false; + + switch (trapnr) { + /* 0x26 - Data CPLB Miss */ + case VEC_CPLB_M: + + if (ANOMALY_05000261) { + static uint32_t last_cplb_fault_retx; + /* + * Work around an anomaly: if we see a new DCPLB fault, + * return without doing anything. Then, + * if we get the same fault again, handle it. + */ + if (last_cplb_fault_retx != regs->retx) { + last_cplb_fault_retx = regs->retx; + return; + } + } + + data = true; + /* fall through */ + + /* 0x27 - Instruction CPLB Miss */ + case VEC_CPLB_I_M: { + volatile uint32_t *CPLB_ADDR_BASE, *CPLB_DATA_BASE, *CPLB_ADDR, *CPLB_DATA; + uint32_t new_cplb_addr = 0, new_cplb_data = 0; + static size_t last_evicted; + size_t i; + + new_cplb_addr = (data ? bfin_read_DCPLB_FAULT_ADDR() : bfin_read_ICPLB_FAULT_ADDR()) & ~(4 * 1024 * 1024 - 1); + + for (i = 0; i < ARRAY_SIZE(bfin_memory_map); ++i) { + /* if the exception is inside this range, lets use it */ + if (new_cplb_addr >= bfin_memory_map[i].start && + new_cplb_addr < bfin_memory_map[i].end) + break; + } + if (i == ARRAY_SIZE(bfin_memory_map)) { + printf("%cCPLB exception outside of memory map at 0x%p\n", + (data ? 'D' : 'I'), new_cplb_addr); + bfin_panic(regs); + } else + debug("CPLB addr %p matches map 0x%p - 0x%p\n", new_cplb_addr, bfin_memory_map[i].start, bfin_memory_map[i].end); + new_cplb_data = (data ? bfin_memory_map[i].data_flags : bfin_memory_map[i].inst_flags); + + /* Turn the cache off */ + SSYNC(); + if (data) { + asm(" .align 8; "); + *pDMEM_CONTROL &= ~ENDCPLB; + } else { + asm(" .align 8; "); + *pIMEM_CONTROL &= ~ENICPLB; + } + SSYNC(); + + if (data) { + CPLB_ADDR_BASE = (uint32_t *)DCPLB_ADDR0; + CPLB_DATA_BASE = (uint32_t *)DCPLB_DATA0; + } else { + CPLB_ADDR_BASE = (uint32_t *)ICPLB_ADDR0; + CPLB_DATA_BASE = (uint32_t *)ICPLB_DATA0; + } + + /* find the next unlocked entry and evict it */ + i = last_evicted & 0xF; + debug("last evicted = %i\n", i); + CPLB_DATA = CPLB_DATA_BASE + i; + while (*CPLB_DATA & CPLB_LOCK) { + debug("skipping %i %p - %08X\n", i, CPLB_DATA, *CPLB_DATA); + i = (i + 1) & 0xF; /* wrap around */ + CPLB_DATA = CPLB_DATA_BASE + i; + } + CPLB_ADDR = CPLB_ADDR_BASE + i; + + debug("evicting entry %i: 0x%p 0x%08X\n", i, *CPLB_ADDR, *CPLB_DATA); + last_evicted = i + 1; + *CPLB_ADDR = new_cplb_addr; + *CPLB_DATA = new_cplb_data; + + /* dump current table for debugging purposes */ + CPLB_ADDR = CPLB_ADDR_BASE; + CPLB_DATA = CPLB_DATA_BASE; + for (i = 0; i < 16; ++i) + debug("%2i 0x%p 0x%08X\n", i, *CPLB_ADDR++, *CPLB_DATA++); + + /* Turn the cache back on */ + SSYNC(); + if (data) { + asm(" .align 8; "); + *pDMEM_CONTROL |= ENDCPLB; + } else { + asm(" .align 8; "); + *pIMEM_CONTROL |= ENICPLB; + } + SSYNC(); + + break; + } + + default: + /* All traps come here */ + bfin_panic(regs); + } +} + +#ifdef CONFIG_DEBUG_DUMP +# define ENABLE_DUMP 1 +#else +# define ENABLE_DUMP 0 +#endif + +#ifdef CONFIG_DEBUG_DUMP_SYMS +# define ENABLE_DUMP_SYMS 1 +#else +# define ENABLE_DUMP_SYMS 0 +#endif + +static const char *symbol_lookup(unsigned long addr, unsigned long *caddr) +{ + if (!ENABLE_DUMP_SYMS) + return NULL; + + extern const char system_map[] __attribute__((__weak__)); + const char *sym, *csym; + char *esym; + unsigned long sym_addr; + + sym = system_map; + csym = NULL; + *caddr = 0; + + while (*sym) { + sym_addr = simple_strtoul(sym, &esym, 16); + sym = esym + 1; + if (sym_addr > addr) + break; + *caddr = sym_addr; + csym = sym; + sym += strlen(sym) + 1; + } + + return csym; +} + +static void decode_address(char *buf, unsigned long address) +{ + unsigned long sym_addr; + const char *sym = symbol_lookup(address, &sym_addr); + + if (sym) { + sprintf(buf, "<0x%p> { %s + 0x%x }", address, sym, address - sym_addr); + return; + } + + if (!address) + sprintf(buf, "<0x%p> /* Maybe null pointer? */", address); + else if (address >= CFG_MONITOR_BASE && + address < CFG_MONITOR_BASE + CFG_MONITOR_LEN) + sprintf(buf, "<0x%p> /* somewhere in u-boot */", address); + else + sprintf(buf, "<0x%p> /* unknown address */", address); +} + +void dump(struct pt_regs *fp) +{ + char buf[150]; + size_t i; + + if (!ENABLE_DUMP) + return; + + printf("SEQUENCER STATUS:\n"); + printf(" SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", + fp->seqstat, fp->ipend, fp->syscfg); + printf(" HWERRCAUSE: 0x%lx\n", (fp->seqstat & HWERRCAUSE) >> HWERRCAUSE_P); + printf(" EXCAUSE : 0x%lx\n", (fp->seqstat & EXCAUSE) >> EXCAUSE_P); + for (i = 6; i <= 15; ++i) { + if (fp->ipend & (1 << i)) { + decode_address(buf, bfin_read32(EVT0 + 4*i)); + printf(" physical IVG%i asserted : %s\n", i, buf); + } + } + decode_address(buf, fp->rete); + printf(" RETE: %s\n", buf); + decode_address(buf, fp->retn); + printf(" RETN: %s\n", buf); + decode_address(buf, fp->retx); + printf(" RETX: %s\n", buf); + decode_address(buf, fp->rets); + printf(" RETS: %s\n", buf); + decode_address(buf, fp->pc); + printf(" PC : %s\n", buf); + + if (fp->seqstat & EXCAUSE) { + decode_address(buf, bfin_read_DCPLB_FAULT_ADDR()); + printf("DCPLB_FAULT_ADDR: %s\n", buf); + decode_address(buf, bfin_read_ICPLB_FAULT_ADDR()); + printf("ICPLB_FAULT_ADDR: %s\n", buf); + } + + printf("\nPROCESSOR STATE:\n"); + printf(" R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n", + fp->r0, fp->r1, fp->r2, fp->r3); + printf(" R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n", + fp->r4, fp->r5, fp->r6, fp->r7); + printf(" P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n", + fp->p0, fp->p1, fp->p2, fp->p3); + printf(" P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n", + fp->p4, fp->p5, fp->fp, fp); + printf(" LB0: %08lx LT0: %08lx LC0: %08lx\n", + fp->lb0, fp->lt0, fp->lc0); + printf(" LB1: %08lx LT1: %08lx LC1: %08lx\n", + fp->lb1, fp->lt1, fp->lc1); + printf(" B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n", + fp->b0, fp->l0, fp->m0, fp->i0); + printf(" B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n", + fp->b1, fp->l1, fp->m1, fp->i1); + printf(" B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n", + fp->b2, fp->l2, fp->m2, fp->i2); + printf(" B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n", + fp->b3, fp->l3, fp->m3, fp->i3); + printf("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", + fp->a0w, fp->a0x, fp->a1w, fp->a1x); + + printf("USP : %08lx ASTAT: %08lx\n", + fp->usp, fp->astat); + + printf("\n"); +} + +void dump_bfin_trace_buffer(void) +{ + char buf[150]; + unsigned long tflags; + size_t i = 0; + + if (!ENABLE_DUMP) + return; + + trace_buffer_save(tflags); + + printf("Hardware Trace:\n"); + + if (bfin_read_TBUFSTAT() & TBUFCNT) { + for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { + decode_address(buf, bfin_read_TBUF()); + printf("%4i Target : %s\n", i, buf); + decode_address(buf, bfin_read_TBUF()); + printf(" Source : %s\n", buf); + } + } + + trace_buffer_restore(tflags); +} + +void bfin_panic(struct pt_regs *regs) +{ + if (ENABLE_DUMP) { + unsigned long tflags; + trace_buffer_save(tflags); + } + + puts( + "\n" + "\n" + "\n" + "Ack! Something bad happened to the Blackfin!\n" + "\n" + ); + dump(regs); + dump_bfin_trace_buffer(); + printf( + "\n" + "Please reset the board\n" + "\n" + ); + bfin_reset_or_hang(); +} diff --git a/cpu/blackfin/watchdog.c b/cpu/blackfin/watchdog.c new file mode 100644 index 0000000..b47c6b6 --- /dev/null +++ b/cpu/blackfin/watchdog.c @@ -0,0 +1,25 @@ +/* + * watchdog.c - driver for Blackfin on-chip watchdog + * + * Copyright (c) 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <watchdog.h> +#include <asm/blackfin.h> + +#ifdef CONFIG_HW_WATCHDOG +void hw_watchdog_reset(void) +{ + bfin_write_WDOG_STAT(0); +} + +void hw_watchdog_init(void) +{ + bfin_write_WDOG_CNT(5 * get_sclk()); /* 5 second timeout */ + hw_watchdog_reset(); + bfin_write_WDOG_CTL(0x0); +} +#endif diff --git a/cpu/mcf5227x/start.S b/cpu/mcf5227x/start.S index 0e2db12..1b47c97 100644 --- a/cpu/mcf5227x/start.S +++ b/cpu/mcf5227x/start.S @@ -354,3 +354,4 @@ version_string: .ascii U_BOOT_VERSION .ascii " (", __DATE__, " - ", __TIME__, ")" .ascii CONFIG_IDENT_STRING, "\0" + .align 4 diff --git a/cpu/mcf523x/start.S b/cpu/mcf523x/start.S index 2bd603d..ad04c09 100644 --- a/cpu/mcf523x/start.S +++ b/cpu/mcf523x/start.S @@ -338,3 +338,4 @@ version_string: .ascii U_BOOT_VERSION .ascii " (", __DATE__, " - ", __TIME__, ")" .ascii CONFIG_IDENT_STRING, "\0" + .align 4 diff --git a/cpu/mcf52x2/config.mk b/cpu/mcf52x2/config.mk index c3899c5..650e340 100644 --- a/cpu/mcf52x2/config.mk +++ b/cpu/mcf52x2/config.mk @@ -30,6 +30,7 @@ is5249:=$(shell grep CONFIG_M5249 $(TOPDIR)/include/$(cfg)) is5253:=$(shell grep CONFIG_M5253 $(TOPDIR)/include/$(cfg)) is5271:=$(shell grep CONFIG_M5271 $(TOPDIR)/include/$(cfg)) is5272:=$(shell grep CONFIG_M5272 $(TOPDIR)/include/$(cfg)) +is5275:=$(shell grep CONFIG_M5275 $(TOPDIR)/include/$(cfg)) is5282:=$(shell grep CONFIG_M5282 $(TOPDIR)/include/$(cfg)) @@ -47,6 +48,9 @@ endif ifneq (,$(findstring CONFIG_M5272,$(is5272))) PLATFORM_CPPFLAGS += -mcpu=5272 endif +ifneq (,$(findstring CONFIG_M5275,$(is5275))) +PLATFORM_CPPFLAGS += -mcpu=5275 +endif ifneq (,$(findstring CONFIG_M5282,$(is5282))) PLATFORM_CPPFLAGS += -mcpu=5282 endif diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c index 71ea408..d5d3d33 100644 --- a/cpu/mcf52x2/cpu.c +++ b/cpu/mcf52x2/cpu.c @@ -6,6 +6,9 @@ * (C) Copyright 2005 * BuS Elektronik GmbH & Co. KG <esw@bus-elektronik.de> * + * MCF5275 additions + * Copyright (C) 2008 Arthur Shipkowski (art@videon-central.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -180,6 +183,69 @@ int watchdog_init(void) #endif /* #ifdef CONFIG_M5272 */ +#ifdef CONFIG_M5275 +int do_reset(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) +{ + volatile rcm_t *rcm = (rcm_t *)(MMAP_RCM); + + udelay(1000); + + rcm->rcr = RCM_RCR_SOFTRST; + + /* we don't return! */ + return 0; +}; + +int checkcpu(void) +{ + char buf[32]; + + printf("CPU: Freescale Coldfire MCF5275 at %s MHz\n", + strmhz(buf, CFG_CLK)); + return 0; +}; + + +#if defined(CONFIG_WATCHDOG) +/* Called by macro WATCHDOG_RESET */ +void watchdog_reset(void) +{ + volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG); + wdt->wsr = 0x5555; + wdt->wsr = 0xAAAA; +} + +int watchdog_disable(void) +{ + volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG); + + wdt->wsr = 0x5555; /* reset watchdog counter */ + wdt->wsr = 0xAAAA; + wdt->wcr = 0; /* disable watchdog timer */ + + puts("WATCHDOG:disabled\n"); + return (0); +} + +int watchdog_init(void) +{ + volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG); + + wdt->wcr = 0; /* disable watchdog */ + + /* set timeout and enable watchdog */ + wdt->wmr = + ((CONFIG_WATCHDOG_TIMEOUT * CFG_HZ) / (32768 * 1000)) - 1; + wdt->wsr = 0x5555; /* reset watchdog counter */ + wdt->wsr = 0xAAAA; + + puts("WATCHDOG:enabled\n"); + return (0); +} +#endif /* #ifdef CONFIG_WATCHDOG */ + +#endif /* #ifdef CONFIG_M5275 */ + #ifdef CONFIG_M5282 int checkcpu(void) { diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 458b85e..207a37e 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -10,6 +10,9 @@ * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * Hayden Fraser (Hayden.Fraser@freescale.com) * + * MCF5275 additions + * Copyright (C) 2008 Arthur Shipkowski (art@videon-central.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -245,6 +248,114 @@ void uart_port_conf(void) } #endif /* #if defined(CONFIG_M5272) */ +#if defined(CONFIG_M5275) + +/* + * Breathe some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + /* if we come from RAM we assume the CPU is + * already initialized. + */ + +#ifndef CONFIG_MONITOR_IS_IN_RAM + volatile wdog_t *wdog_reg = (wdog_t *)(MMAP_WDOG); + volatile gpio_t *gpio_reg = (gpio_t *)(MMAP_GPIO); + volatile csctrl_t *csctrl_reg = (csctrl_t *)(MMAP_FBCS); + + /* Kill watchdog so we can initialize the PLL */ + wdog_reg->wcr = 0; + + /* Memory Controller: */ + /* Flash */ + csctrl_reg->ar0 = CFG_AR0_PRELIM; + csctrl_reg->cr0 = CFG_CR0_PRELIM; + csctrl_reg->mr0 = CFG_MR0_PRELIM; + +#if (defined(CFG_AR1_PRELIM) && defined(CFG_CR1_PRELIM) && defined(CFG_MR1_PRELIM)) + csctrl_reg->ar1 = CFG_AR1_PRELIM; + csctrl_reg->cr1 = CFG_CR1_PRELIM; + csctrl_reg->mr1 = CFG_MR1_PRELIM; +#endif + +#if (defined(CFG_AR2_PRELIM) && defined(CFG_CR2_PRELIM) && defined(CFG_MR2_PRELIM)) + csctrl_reg->ar2 = CFG_AR2_PRELIM; + csctrl_reg->cr2 = CFG_CR2_PRELIM; + csctrl_reg->mr2 = CFG_MR2_PRELIM; +#endif + +#if (defined(CFG_AR3_PRELIM) && defined(CFG_CR3_PRELIM) && defined(CFG_MR3_PRELIM)) + csctrl_reg->ar3 = CFG_AR3_PRELIM; + csctrl_reg->cr3 = CFG_CR3_PRELIM; + csctrl_reg->mr3 = CFG_MR3_PRELIM; +#endif + +#if (defined(CFG_AR4_PRELIM) && defined(CFG_CR4_PRELIM) && defined(CFG_MR4_PRELIM)) + csctrl_reg->ar4 = CFG_AR4_PRELIM; + csctrl_reg->cr4 = CFG_CR4_PRELIM; + csctrl_reg->mr4 = CFG_MR4_PRELIM; +#endif + +#if (defined(CFG_AR5_PRELIM) && defined(CFG_CR5_PRELIM) && defined(CFG_MR5_PRELIM)) + csctrl_reg->ar5 = CFG_AR5_PRELIM; + csctrl_reg->cr5 = CFG_CR5_PRELIM; + csctrl_reg->mr5 = CFG_MR5_PRELIM; +#endif + +#if (defined(CFG_AR6_PRELIM) && defined(CFG_CR6_PRELIM) && defined(CFG_MR6_PRELIM)) + csctrl_reg->ar6 = CFG_AR6_PRELIM; + csctrl_reg->cr6 = CFG_CR6_PRELIM; + csctrl_reg->mr6 = CFG_MR6_PRELIM; +#endif + +#if (defined(CFG_AR7_PRELIM) && defined(CFG_CR7_PRELIM) && defined(CFG_MR7_PRELIM)) + csctrl_reg->ar7 = CFG_AR7_PRELIM; + csctrl_reg->cr7 = CFG_CR7_PRELIM; + csctrl_reg->mr7 = CFG_MR7_PRELIM; +#endif + +#endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */ + +#ifdef CONFIG_FSL_I2C + gpio_reg->par_feci2c = 0x000F; +#endif + + /* enable instruction cache now */ + icache_enable(); +} + +/* + * initialize higher level parts of CPU like timers + */ +int cpu_init_r(void) +{ + return (0); +} + +void uart_port_conf(void) +{ + volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->par_uart |= UART0_ENABLE_MASK; + break; + case 1: + gpio->par_uart |= UART1_ENABLE_MASK; + break; + case 2: + gpio->par_uart |= UART2_ENABLE_MASK; + break; + } +} +#endif /* #if defined(CONFIG_M5275) */ + #if defined(CONFIG_M5282) /* * Breath some life into the CPU... diff --git a/cpu/mcf52x2/interrupts.c b/cpu/mcf52x2/interrupts.c index 9167cec..b8fb7bb 100644 --- a/cpu/mcf52x2/interrupts.c +++ b/cpu/mcf52x2/interrupts.c @@ -59,7 +59,7 @@ void dtimer_intr_setup(void) #endif /* CONFIG_MCFTMR */ #endif /* CONFIG_M5272 */ -#if defined(CONFIG_M5282) || defined(CONFIG_M5271) +#if defined(CONFIG_M5282) || defined(CONFIG_M5271) || defined(CONFIG_M5275) int interrupt_init(void) { volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); @@ -81,7 +81,7 @@ void dtimer_intr_setup(void) intp->imrl0 &= ~CFG_TMRINTR_MASK; } #endif /* CONFIG_MCFTMR */ -#endif /* CONFIG_M5282 | CONFIG_M5271 */ +#endif /* CONFIG_M5282 | CONFIG_M5271 | CONFIG_M5275 */ #if defined(CONFIG_M5249) || defined(CONFIG_M5253) int interrupt_init(void) diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c index bc1e200..85a5c4d 100644 --- a/cpu/mcf52x2/speed.c +++ b/cpu/mcf52x2/speed.c @@ -64,8 +64,18 @@ int get_clocks (void) #endif /* CONFIG_M5249 || CONFIG_M5253 */ +#if defined(CONFIG_M5275) + volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL); + + /* Setup PLL */ + pll->syncr = 0x01080000; + while (!(pll->synsr & FMPLL_SYNSR_LOCK)); + pll->syncr = 0x01000000; + while (!(pll->synsr & FMPLL_SYNSR_LOCK)); +#endif + gd->cpu_clk = CFG_CLK; -#if defined(CONFIG_M5249) || defined(CONFIG_M5253) +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) || defined(CONFIG_M5275) gd->bus_clk = gd->cpu_clk / 2; #else gd->bus_clk = gd->cpu_clk; diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S index 260a09a..2bc0df3 100644 --- a/cpu/mcf52x2/start.S +++ b/cpu/mcf52x2/start.S @@ -56,9 +56,7 @@ _vectors: .long 0x00000000 /* Flash offset is 0 until we setup CS0 */ -#if defined(CONFIG_R5200) -.long 0x400 -#elif defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE) +#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE) .long _start - TEXT_BASE #else .long _START @@ -160,7 +158,7 @@ _copy_flash: _flashbar_setup: /* Initialize FLASHBAR: locate internal Flash and validate it */ move.l #(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0 - movec %d0, %RAMBAR0 + movec %d0, %FLASHBAR jmp _after_flashbar_copy.L /* Force jump to absolute address */ _flashbar_setup_end: nop @@ -168,7 +166,7 @@ _after_flashbar_copy: #else /* Setup code to initialize FLASHBAR, if start from external Memory */ move.l #(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0 - movec %d0, %RAMBAR0 + movec %d0, %RAMBAR1 #endif /* (TEXT_BASE == CFG_INT_FLASH_BASE) */ #endif @@ -185,16 +183,15 @@ _after_flashbar_copy: movec %d0, %VBR #endif -#ifdef CONFIG_R5200 - move.l #(_flash_setup-CFG_FLASH_BASE), %a0 - move.l #(_flash_setup_end-CFG_FLASH_BASE), %a1 - move.l #(CFG_INIT_RAM_ADDR), %a2 -_copy_flash: - move.l (%a0)+, (%a2)+ - cmp.l %a0, %a1 - bgt.s _copy_flash - jmp CFG_INIT_RAM_ADDR -_after_flash_copy: +#ifdef CONFIG_M5275 + /* Initialize IPSBAR */ + move.l #(CFG_MBAR + 1), %d0 /* set IPSBAR address + valid flag */ + move.l %d0, 0x40000000 +/* movec %d0, %MBAR */ + + /* Initialize RAMBAR: locate SRAM and validate it */ + move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0 + movec %d0, %RAMBAR1 #endif #if 0 @@ -219,24 +216,6 @@ _after_flash_copy: /*------------------------------------------------------------------------------*/ -#ifdef CONFIG_R5200 -_flash_setup: - /* CSAR0 */ - move.l #((CFG_FLASH_BASE & 0xffff0000) >> 16), %d0 - move.w %d0, 0x40000080 - - /* CSCR0 */ - move.l #0x2180, %d0 /* 8 wait states, 16bit port, auto ack, */ - move.w %d0, 0x4000008A - - /* CSMR0 */ - move.l #0x001f0001, %d0 /* 2 MB, valid */ - move.l %d0, 0x40000084 - - jmp _after_flash_copy.L -_flash_setup_end: -#endif - /* * void relocate_code (addr_sp, gd, addr_moni) * @@ -394,6 +373,25 @@ icache_enable: rts #endif +#if defined(CONFIG_M5275) +/* + * Instruction cache only + */ + .globl icache_enable +icache_enable: + move.l #0x01400000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0x0000c000, %d0 /* Setup SDRAM caching */ + movec %d0, %ACR0 /* Enable cache */ + move.l #0x00000000, %d0 /* No other caching */ + movec %d0, %ACR1 /* Enable cache */ + move.l #0x80400100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + moveq #1, %d0 + move.l %d0, icache_state + rts +#endif + #ifdef CONFIG_M5282 .globl icache_enable icache_enable: @@ -478,3 +476,4 @@ version_string: .ascii U_BOOT_VERSION .ascii " (", __DATE__, " - ", __TIME__, ")" .ascii CONFIG_IDENT_STRING, "\0" + .align 4 diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S index 61be2ea..a524f70 100644 --- a/cpu/mcf532x/start.S +++ b/cpu/mcf532x/start.S @@ -333,3 +333,4 @@ version_string: .ascii U_BOOT_VERSION .ascii " (", __DATE__, " - ", __TIME__, ")" .ascii CONFIG_IDENT_STRING, "\0" + .align 4 diff --git a/cpu/mcf5445x/Makefile b/cpu/mcf5445x/Makefile index 26ec298..a549fdd 100644 --- a/cpu/mcf5445x/Makefile +++ b/cpu/mcf5445x/Makefile @@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk LIB = lib$(CPU).a START = start.o -COBJS = cpu.o speed.o cpu_init.o interrupts.o pci.o +COBJS = cpu.o speed.o cpu_init.o interrupts.o pci.o dspi.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mcf5445x/dspi.c b/cpu/mcf5445x/dspi.c new file mode 100644 index 0000000..44d8505 --- /dev/null +++ b/cpu/mcf5445x/dspi.c @@ -0,0 +1,73 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <spi.h> + +#if defined(CONFIG_CF_DSPI) +#include <asm/immap.h> +void dspi_init(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; + + gpio->par_dspi = GPIO_PAR_DSPI_PCS5_PCS5 | GPIO_PAR_DSPI_PCS2_PCS2 | + GPIO_PAR_DSPI_PCS1_PCS1 | GPIO_PAR_DSPI_PCS0_PCS0 | + GPIO_PAR_DSPI_SIN_SIN | GPIO_PAR_DSPI_SOUT_SOUT | + GPIO_PAR_DSPI_SCK_SCK; + + dspi->dmcr = DSPI_DMCR_MSTR | DSPI_DMCR_CSIS7 | DSPI_DMCR_CSIS6 | + DSPI_DMCR_CSIS5 | DSPI_DMCR_CSIS4 | DSPI_DMCR_CSIS3 | + DSPI_DMCR_CSIS2 | DSPI_DMCR_CSIS1 | DSPI_DMCR_CSIS0 | + DSPI_DMCR_CRXF | DSPI_DMCR_CTXF; + + dspi->dctar0 = DSPI_DCTAR_TRSZ(7) | DSPI_DCTAR_CPOL | DSPI_DCTAR_CPHA | + DSPI_DCTAR_PCSSCK_1CLK | DSPI_DCTAR_PASC(0) | + DSPI_DCTAR_PDT(0) | DSPI_DCTAR_CSSCK(0) | + DSPI_DCTAR_ASC(0) | DSPI_DCTAR_PBR(0) | + DSPI_DCTAR_DT(1) | DSPI_DCTAR_BR(1); +} + +void dspi_tx(int chipsel, u8 attrib, u16 data) +{ + volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; + + while ((dspi->dsr & 0x0000F000) >= 4) ; + + dspi->dtfr = (attrib << 24) | ((1 << chipsel) << 16) | data; +} + +u16 dspi_rx(void) +{ + volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; + + while ((dspi->dsr & 0x000000F0) == 0) ; + + return (dspi->drfr & 0xFFFF); +} + +#endif /* CONFIG_HARD_SPI */ diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S index d64c5af..0c5194a 100644 --- a/cpu/mcf5445x/start.S +++ b/cpu/mcf5445x/start.S @@ -379,3 +379,4 @@ version_string: .ascii U_BOOT_VERSION .ascii " (", __DATE__, " - ", __TIME__, ")" .ascii CONFIG_IDENT_STRING, "\0" + .align 4 diff --git a/cpu/mcf547x_8x/start.S b/cpu/mcf547x_8x/start.S index 442665f..c12d7a0 100644 --- a/cpu/mcf547x_8x/start.S +++ b/cpu/mcf547x_8x/start.S @@ -359,3 +359,4 @@ version_string: .ascii U_BOOT_VERSION .ascii " (", __DATE__, " - ", __TIME__, ")" .ascii CONFIG_IDENT_STRING, "\0" + .align 4 diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index bff3cef..36de78d 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -42,6 +42,30 @@ int checkcpu(void) u32 pvr = get_pvr(); u32 spridr; char buf[32]; + int i; + +#define CPU_TYPE_ENTRY(x) {#x, SPR_##x} + const struct cpu_type { + char name[15]; + u32 partid; + } cpu_type_list [] = { + CPU_TYPE_ENTRY(8311), + CPU_TYPE_ENTRY(8313), + CPU_TYPE_ENTRY(8314), + CPU_TYPE_ENTRY(8315), + CPU_TYPE_ENTRY(8321), + CPU_TYPE_ENTRY(8323), + CPU_TYPE_ENTRY(8343), + CPU_TYPE_ENTRY(8347_TBGA_), + CPU_TYPE_ENTRY(8347_PBGA_), + CPU_TYPE_ENTRY(8349), + CPU_TYPE_ENTRY(8358_TBGA_), + CPU_TYPE_ENTRY(8358_PBGA_), + CPU_TYPE_ENTRY(8360), + CPU_TYPE_ENTRY(8377), + CPU_TYPE_ENTRY(8378), + CPU_TYPE_ENTRY(8379), + }; immr = (immap_t *)CFG_IMMR; @@ -69,130 +93,26 @@ int checkcpu(void) } spridr = immr->sysconf.spridr; - switch(spridr) { - case SPR_8349E_REV10: - case SPR_8349E_REV11: - case SPR_8349E_REV31: - puts("MPC8349E, "); - break; - case SPR_8349_REV10: - case SPR_8349_REV11: - case SPR_8349_REV31: - puts("MPC8349, "); - break; - case SPR_8347E_REV10_TBGA: - case SPR_8347E_REV11_TBGA: - case SPR_8347E_REV31_TBGA: - case SPR_8347E_REV10_PBGA: - case SPR_8347E_REV11_PBGA: - case SPR_8347E_REV31_PBGA: - puts("MPC8347E, "); - break; - case SPR_8347_REV10_TBGA: - case SPR_8347_REV11_TBGA: - case SPR_8347_REV31_TBGA: - case SPR_8347_REV10_PBGA: - case SPR_8347_REV11_PBGA: - case SPR_8347_REV31_PBGA: - puts("MPC8347, "); - break; - case SPR_8343E_REV10: - case SPR_8343E_REV11: - case SPR_8343E_REV31: - puts("MPC8343E, "); - break; - case SPR_8343_REV10: - case SPR_8343_REV11: - case SPR_8343_REV31: - puts("MPC8343, "); - break; - case SPR_8360E_REV10: - case SPR_8360E_REV11: - case SPR_8360E_REV12: - case SPR_8360E_REV20: - case SPR_8360E_REV21: - puts("MPC8360E, "); - break; - case SPR_8360_REV10: - case SPR_8360_REV11: - case SPR_8360_REV12: - case SPR_8360_REV20: - case SPR_8360_REV21: - puts("MPC8360, "); - break; - case SPR_8323E_REV10: - case SPR_8323E_REV11: - puts("MPC8323E, "); - break; - case SPR_8323_REV10: - case SPR_8323_REV11: - puts("MPC8323, "); - break; - case SPR_8321E_REV10: - case SPR_8321E_REV11: - puts("MPC8321E, "); - break; - case SPR_8321_REV10: - case SPR_8321_REV11: - puts("MPC8321, "); - break; - case SPR_8311_REV10: - puts("MPC8311, "); - break; - case SPR_8311E_REV10: - puts("MPC8311E, "); - break; - case SPR_8313_REV10: - puts("MPC8313, "); - break; - case SPR_8313E_REV10: - puts("MPC8313E, "); - break; - case SPR_8315E_REV10: - puts("MPC8315E, "); - break; - case SPR_8315_REV10: - puts("MPC8315, "); - break; - case SPR_8314E_REV10: - puts("MPC8314E, "); - break; - case SPR_8314_REV10: - puts("MPC8314, "); - break; - case SPR_8379E_REV10: - puts("MPC8379E, "); - break; - case SPR_8379_REV10: - puts("MPC8379, "); - break; - case SPR_8378E_REV10: - puts("MPC8378E, "); - break; - case SPR_8378_REV10: - puts("MPC8378, "); - break; - case SPR_8377E_REV10: - puts("MPC8377E, "); - break; - case SPR_8377_REV10: - puts("MPC8377, "); - break; - default: - printf("Rev: Unknown revision number:%08x\n" - "Warning: Unsupported cpu revision!\n",spridr); - return 0; - } -#if defined(CONFIG_MPC834X) - /* Multiple revisons of 834x processors may have the same SPRIDR value. - * So use PVR to identify the revision number. - */ - printf("Rev: %02x at %s MHz", PVR_MAJ(pvr)<<4 | PVR_MIN(pvr), strmhz(buf, clock)); -#else - printf("Rev: %02x at %s MHz", spridr & 0x0000FFFF, strmhz(buf, clock)); -#endif - printf(", CSB: %4d MHz\n", gd->csb_clk / 1000000); + for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++) + if (cpu_type_list[i].partid == PARTID_NO_E(spridr)) { + puts("MPC"); + puts(cpu_type_list[i].name); + if (IS_E_PROCESSOR(spridr)) + puts("E"); + if (REVID_MAJOR(spridr) >= 2) + puts("A"); + printf(", Rev: %d.%d", REVID_MAJOR(spridr), + REVID_MINOR(spridr)); + break; + } + + if (i == ARRAY_SIZE(cpu_type_list)) + printf("(SPRIDR %08x unknown), ", spridr); + + printf(" at %s MHz, ", strmhz(buf, clock)); + + printf("CSB: %s MHz\n", strmhz(buf, gd->csb_clk)); return 0; } diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 0acca47..97ac7bb 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -34,10 +34,13 @@ #include <asm/mmu.h> #include <spd_sdram.h> +DECLARE_GLOBAL_DATA_PTR; + void board_add_ram_info(int use_default) { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile ddr83xx_t *ddr = &immap->ddr; + char buf[32]; printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1); @@ -48,9 +51,11 @@ void board_add_ram_info(int use_default) puts(", 64-bit"); if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) - puts(", ECC on)"); + puts(", ECC on"); else - puts(", ECC off)"); + puts(", ECC off"); + + printf(", %s MHz)", strmhz(buf, gd->mem_clk)); #if defined(CFG_LB_SDRAM) && defined(CFG_LBC_SDRAM_SIZE) puts("\nSDRAM: "); @@ -60,8 +65,6 @@ void board_add_ram_info(int use_default) #ifdef CONFIG_SPD_EEPROM -DECLARE_GLOBAL_DATA_PTR; - #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) extern void dma_init(void); extern uint dma_check(void); @@ -78,12 +81,12 @@ extern int dma_xfer(void *dest, uint count, void *src); int picos_to_clk(int picos) { - unsigned int ddr_bus_clk; + unsigned int mem_bus_clk; int clks; - ddr_bus_clk = gd->ddr_clk >> 1; - clks = picos / (1000000000 / (ddr_bus_clk / 1000)); - if (picos % (1000000000 / (ddr_bus_clk / 1000)) != 0) + mem_bus_clk = gd->mem_clk >> 1; + clks = picos / (1000000000 / (mem_bus_clk / 1000)); + if (picos % (1000000000 / (mem_bus_clk / 1000)) != 0) clks++; return clks; @@ -313,7 +316,7 @@ long int spd_sdram() debug("DDR:Module maximum data rate is: %dMhz\n", max_data_rate); - ddrc_clk = gd->ddr_clk / 1000000; + ddrc_clk = gd->mem_clk / 1000000; effective_data_rate = 0; if (max_data_rate >= 390 && max_data_rate < 460) { /* it is DDR 400 */ diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index f598699..16145dd 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -122,9 +122,9 @@ int get_clocks(void) u32 enc_clk; u32 lbiu_clk; u32 lclk_clk; - u32 ddr_clk; + u32 mem_clk; #if defined(CONFIG_MPC8360) - u32 ddr_sec_clk; + u32 mem_sec_clk; #endif #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) u32 qepmf; @@ -400,11 +400,11 @@ int get_clocks(void) return -12; } - ddr_clk = csb_clk * + mem_clk = csb_clk * (1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT)); corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT; #if defined(CONFIG_MPC8360) - ddr_sec_clk = csb_clk * (1 + + mem_sec_clk = csb_clk * (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT)); #endif @@ -466,9 +466,9 @@ int get_clocks(void) gd->enc_clk = enc_clk; gd->lbiu_clk = lbiu_clk; gd->lclk_clk = lclk_clk; - gd->ddr_clk = ddr_clk; + gd->mem_clk = mem_clk; #if defined(CONFIG_MPC8360) - gd->ddr_sec_clk = ddr_sec_clk; + gd->mem_sec_clk = mem_sec_clk; #endif #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) gd->qe_clk = qe_clk; @@ -508,9 +508,9 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) #endif printf(" Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000); printf(" Local Bus: %4d MHz\n", gd->lclk_clk / 1000000); - printf(" DDR: %4d MHz\n", gd->ddr_clk / 1000000); + printf(" DDR: %4d MHz\n", gd->mem_clk / 1000000); #if defined(CONFIG_MPC8360) - printf(" DDR Secondary: %4d MHz\n", gd->ddr_sec_clk / 1000000); + printf(" DDR Secondary: %4d MHz\n", gd->mem_sec_clk / 1000000); #endif printf(" SEC: %4d MHz\n", gd->enc_clk / 1000000); printf(" I2C1: %4d MHz\n", gd->i2c1_clk / 1000000); diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S index 309eb30..fdf9d35 100644 --- a/cpu/mpc83xx/start.S +++ b/cpu/mpc83xx/start.S @@ -172,8 +172,11 @@ boot_warm: /* time t 5 */ /* there and deflate the flash size back to minimal size */ /*------------------------------------------------------------*/ bl map_flash_by_law1 - lis r4, (CFG_MONITOR_BASE)@h - ori r4, r4, (CFG_MONITOR_BASE)@l + + GET_GOT /* initialize GOT access */ + lwz r4, GOT(_start) + addi r4, r4, -EXC_OFF_SYS_RESET + addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET mtlr r5 blr @@ -872,8 +875,8 @@ relocate_code: mr r10, r5 /* Save copy of Destination Address */ mr r3, r5 /* Destination Address */ - lis r4, CFG_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CFG_MONITOR_BASE@l + lwz r4, GOT(_start) + addi r4, r4, -EXC_OFF_SYS_RESET lwz r5, GOT(__init_end) sub r5, r5, r4 li r6, CFG_CACHELINE_SIZE /* Cache Line Size */ diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index d990250..007cb4f 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -274,7 +274,7 @@ static void emac_loopback_disable(EMAC_4XX_HW_PST hw_p) static void ppc_4xx_eth_halt (struct eth_device *dev) { EMAC_4XX_HW_PST hw_p = dev->priv; - uint32_t failsafe = 10000; + u32 val = 10000; out_be32((void *)EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */ @@ -290,8 +290,8 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) /* wait for reset */ while (mfdcr (malrxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) { udelay (1000); /* Delay 1 MS so as not to hammer the register */ - failsafe--; - if (failsafe == 0) + val--; + if (val == 0) break; } @@ -308,6 +308,13 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) hw_p->print_speed = 1; /* print speed message again next time */ #endif +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) + /* don't bypass the TAHOE0/TAHOE1 cores for Linux */ + mfsdr(SDR0_ETH_CFG, val); + val &= ~(SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS); + mtsdr(SDR0_ETH_CFG, val); +#endif + return; } @@ -494,11 +501,18 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) u32 zmiifer; /* ZMII0_FER reg. */ u32 rmiifer; /* RGMII0_FER reg. Bridge 0 */ u32 rmiifer1; /* RGMII0_FER reg. Bridge 1 */ + int mode; zmiifer = 0; rmiifer = 0; rmiifer1 = 0; +#if defined(CONFIG_460EX) + mode = 9; +#else + mode = 10; +#endif + /* TODO: * NOTE: 460GT has 2 RGMII bridge cores: * emac0 ------ RGMII0_BASE @@ -520,7 +534,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) * Right now only 2*RGMII is supported. Please extend when needed. * sr - 2008-02-19 */ - switch (9) { + switch (mode) { case 1: /* 1 MII - 460EX */ /* GMC0 EMAC4_0, ZMII Bridge */ @@ -703,6 +717,11 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #ifdef CONFIG_4xx_DCACHE static u32 last_used_ea = 0; #endif +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_405EX) + int rgmii_channel; +#endif EMAC_4XX_HW_PST hw_p = dev->priv; @@ -836,10 +855,12 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) reg = CONFIG_PHY1_ADDR; break; #endif -#if defined (CONFIG_440GX) +#if defined (CONFIG_PHY2_ADDR) case 2: reg = CONFIG_PHY2_ADDR; break; +#endif +#if defined (CONFIG_PHY3_ADDR) case 3: reg = CONFIG_PHY3_ADDR; break; @@ -1006,12 +1027,17 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) + if (devnum >= 2) + rgmii_channel = devnum - 2; + else + rgmii_channel = devnum; + if (speed == 1000) - reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum)); + reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V(rgmii_channel)); else if (speed == 100) - reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum)); + reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V(rgmii_channel)); else if (speed == 10) - reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum)); + reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V(rgmii_channel)); else { printf("Error in RGMII Speed\n"); return -1; @@ -1131,7 +1157,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #endif #if defined(CONFIG_460EX) || defined(CONFIG_460GT) - mtdcr (malrxctp8r, hw_p->rx); + mtdcr (malrxctp8r, hw_p->rx_phys); /* set RX buffer size */ mtdcr (malrcbs8, ENET_MAX_MTU_ALIGNED / 16); #else @@ -1160,6 +1186,26 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) mtdcr (malrcbs3, ENET_MAX_MTU_ALIGNED / 16); break; #endif /* CONFIG_440GX */ +#if defined (CONFIG_460GT) + case 2: + /* setup MAL tx & rx channel pointers */ + mtdcr (maltxbattr, 0x0); + mtdcr (malrxbattr, 0x0); + mtdcr (maltxctp2r, hw_p->tx_phys); + mtdcr (malrxctp16r, hw_p->rx_phys); + /* set RX buffer size */ + mtdcr (malrcbs16, ENET_MAX_MTU_ALIGNED / 16); + break; + case 3: + /* setup MAL tx & rx channel pointers */ + mtdcr (maltxbattr, 0x0); + mtdcr (malrxbattr, 0x0); + mtdcr (maltxctp3r, hw_p->tx_phys); + mtdcr (malrxctp24r, hw_p->rx_phys); + /* set RX buffer size */ + mtdcr (malrcbs24, ENET_MAX_MTU_ALIGNED / 16); + break; +#endif /* CONFIG_460GT */ case 0: default: /* setup MAL tx & rx channel pointers */ @@ -1866,14 +1912,22 @@ int ppc_4xx_eth_initialize (bd_t * bis) case 2: memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START], bis->bi_enet2addr, 6); +#if defined(CONFIG_460GT) + hw_addr[eth_num] = 0x300; +#else hw_addr[eth_num] = 0x400; +#endif break; #endif #ifdef CONFIG_HAS_ETH3 case 3: memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START], bis->bi_enet3addr, 6); +#if defined(CONFIG_460GT) + hw_addr[eth_num] = 0x400; +#else hw_addr[eth_num] = 0x600; +#endif break; #endif } diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index 5d15e2f..42eabfe 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -99,10 +99,107 @@ DECLARE_GLOBAL_DATA_PTR; # endif #endif /* CFG_INIT_DCACHE_CS */ +#ifndef CFG_PLL_RECONFIG +#define CFG_PLL_RECONFIG 0 +#endif + +void reconfigure_pll(u32 new_cpu_freq) +{ +#if defined(CONFIG_440EPX) + int reset_needed = 0; + u32 reg, temp; + u32 prbdv0, target_prbdv0, /* CLK_PRIMBD */ + fwdva, target_fwdva, fwdvb, target_fwdvb, /* CLK_PLLD */ + fbdv, target_fbdv, lfbdv, target_lfbdv, + perdv0, target_perdv0, /* CLK_PERD */ + spcid0, target_spcid0; /* CLK_SPCID */ + + /* Reconfigure clocks if necessary. + * See PPC440EPx User's Manual, sections 8.2 and 14 */ + if (new_cpu_freq == 667) { + target_prbdv0 = 2; + target_fwdva = 2; + target_fwdvb = 4; + target_fbdv = 20; + target_lfbdv = 1; + target_perdv0 = 4; + target_spcid0 = 4; + + mfcpr(clk_primbd, reg); + temp = (reg & PRBDV_MASK) >> 24; + prbdv0 = temp ? temp : 8; + if (prbdv0 != target_prbdv0) { + reg &= ~PRBDV_MASK; + reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24); + mtcpr(clk_primbd, reg); + reset_needed = 1; + } + + mfcpr(clk_plld, reg); + + temp = (reg & PLLD_FWDVA_MASK) >> 16; + fwdva = temp ? temp : 16; + + temp = (reg & PLLD_FWDVB_MASK) >> 8; + fwdvb = temp ? temp : 8; + + temp = (reg & PLLD_FBDV_MASK) >> 24; + fbdv = temp ? temp : 32; + + temp = (reg & PLLD_LFBDV_MASK); + lfbdv = temp ? temp : 64; + + if (fwdva != target_fwdva || fbdv != target_fbdv || lfbdv != target_lfbdv) { + reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK | + PLLD_FBDV_MASK | PLLD_LFBDV_MASK); + reg |= ((target_fwdva == 16 ? 0 : target_fwdva) << 16) | + ((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) | + ((target_fbdv == 32 ? 0 : target_fbdv) << 24) | + (target_lfbdv == 64 ? 0 : target_lfbdv); + mtcpr(clk_plld, reg); + reset_needed = 1; + } + + mfcpr(clk_perd, reg); + perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24; + if (perdv0 != target_perdv0) { + reg &= ~CPR0_PERD_PERDV0_MASK; + reg |= (target_perdv0 << 24); + mtcpr(clk_perd, reg); + reset_needed = 1; + } + + mfcpr(clk_spcid, reg); + temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24; + spcid0 = temp ? temp : 4; + if (spcid0 != target_spcid0) { + reg &= ~CPR0_SPCID_SPCIDV0_MASK; + reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24); + mtcpr(clk_spcid, reg); + reset_needed = 1; + } + + /* Set reload inhibit so configuration will persist across + * processor resets */ + mfcpr(clk_icfg, reg); + reg &= ~CPR0_ICFG_RLI_MASK; + reg |= 1 << 31; + mtcpr(clk_icfg, reg); + } + + /* Reset processor if configuration changed */ + if (reset_needed) { + __asm__ __volatile__ ("sync; isync"); + mtspr(dbcr0, 0x20000000); + } +#endif +} + /* * Breath some life into the CPU... * - * Set up the memory map, + * Reconfigure PLL if necessary, + * set up the memory map, * initialize a bunch of registers */ void @@ -111,6 +208,7 @@ cpu_init_f (void) #if defined(CONFIG_WATCHDOG) unsigned long val; #endif + reconfigure_pll(CFG_PLL_RECONFIG); #if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CFG_4xx_GPIO_TABLE) /* @@ -135,6 +233,7 @@ cpu_init_f (void) #if defined (CFG_GPIO0_TCR) out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */ #endif +#endif /* CONFIG_405EP ... && !CFG_4xx_GPIO_TABLE */ #if defined (CONFIG_405EP) /* @@ -147,7 +246,6 @@ cpu_init_f (void) */ mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); #endif /* CONFIG_405EP */ -#endif /* CONFIG_405EP */ #if defined(CFG_4xx_GPIO_TABLE) gpio_set_chip_configuration(); diff --git a/cpu/ppc4xx/denali_spd_ddr2.c b/cpu/ppc4xx/denali_spd_ddr2.c index 60f89c9..e20c9eb 100644 --- a/cpu/ppc4xx/denali_spd_ddr2.c +++ b/cpu/ppc4xx/denali_spd_ddr2.c @@ -1093,10 +1093,10 @@ long int initdram(int board_type) program_ddr0_06(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq); - /*------------------------------------------------------------------ + /* * TODO: tFAW not found in SPD. Value of 13 taken from Sequoia - * board SDRAM, but may be overly concervate. - *-----------------------------------------------------------------*/ + * board SDRAM, but may be overly conservative. + */ mtsdram(DDR0_07, DDR0_07_NO_CMD_INIT_ENCODE(0) | DDR0_07_TFAW_ENCODE(13) | DDR0_07_AUTO_REFRESH_MODE_ENCODE(1) | @@ -1181,26 +1181,29 @@ long int initdram(int board_type) denali_wait_for_dlllock(); #if defined(CONFIG_DDR_DATA_EYE) - /* -----------------------------------------------------------+ - * Perform data eye search if requested. - * ----------------------------------------------------------*/ - program_tlb(0, CFG_SDRAM_BASE, dram_size, TLB_WORD2_I_ENABLE); + /* + * Map the first 1 MiB of memory in the TLB, and perform the data eye + * search. + */ + program_tlb(0, CFG_SDRAM_BASE, TLB_1MB_SIZE, TLB_WORD2_I_ENABLE); denali_core_search_data_eye(); denali_sdram_register_dump(); - remove_tlb(CFG_SDRAM_BASE, dram_size); + remove_tlb(CFG_SDRAM_BASE, TLB_1MB_SIZE); #endif #if defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC) program_tlb(0, CFG_SDRAM_BASE, dram_size, 0); sync(); - eieio(); /* Zero the memory */ debug("Zeroing SDRAM..."); - dcbz_area(CFG_SDRAM_BASE, dram_size); +#if defined(CFG_MEM_TOP_HIDE) + dcbz_area(CFG_SDRAM_BASE, dram_size - CFG_MEM_TOP_HIDE); +#else +#error Please define CFG_MEM_TOP_HIDE (see README) in your board config file +#endif dflush(); debug("Completed\n"); sync(); - eieio(); remove_tlb(CFG_SDRAM_BASE, dram_size); #if defined(CONFIG_DDR_ECC) @@ -1211,7 +1214,6 @@ long int initdram(int board_type) u32 val; sync(); - eieio(); /* Clear error status */ mfsdram(DDR0_00, val); mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL); @@ -1229,7 +1231,6 @@ long int initdram(int board_type) print_mcsr(); #endif sync(); - eieio(); } #endif /* defined(CONFIG_DDR_ECC) */ #endif /* defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC) */ diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c index 698bcb5..8620e2b 100644 --- a/cpu/ppc4xx/interrupts.c +++ b/cpu/ppc4xx/interrupts.c @@ -218,15 +218,16 @@ static void uic_interrupt(u32 uic_base, int vec_base) } else { set_dcr(uic_base + UIC_ER, get_dcr(uic_base + UIC_ER) & - ~(0x80000000 >> vec)); + ~(0x80000000 >> (vec & 0x1f))); printf("Masking bogus interrupt vector %d" " (UIC_BASE=0x%x)\n", vec, uic_base); } /* - * After servicing the interrupt, we have to remove the status indicator. + * After servicing the interrupt, we have to remove the + * status indicator */ - set_dcr(uic_base + UIC_SR, (0x80000000 >> vec)); + set_dcr(uic_base + UIC_SR, (0x80000000 >> (vec & 0x1f))); } /* diff --git a/cpu/sh4/cpu.c b/cpu/sh4/cpu.c index 0ebf951..d94e139 100644 --- a/cpu/sh4/cpu.c +++ b/cpu/sh4/cpu.c @@ -24,6 +24,7 @@ #include <common.h> #include <command.h> #include <asm/processor.h> +#include <asm/cache.h> int checkcpu(void) { @@ -51,7 +52,7 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) void flush_cache (unsigned long addr, unsigned long size) { - + dcache_invalid_range( addr , addr + size ); } void icache_enable (void) diff --git a/doc/README.korat b/doc/README.korat new file mode 100644 index 0000000..0a59f40 --- /dev/null +++ b/doc/README.korat @@ -0,0 +1,51 @@ +The Korat board has two NOR flashes, FLASH0 and FLASH1, which are connected to +chip select 0 and 1, respectively. FLASH0 contains 16 MiB, and is mapped to +addresses 0xFF000000 - 0xFFFFFFFF as U-Boot Flash Bank #2. FLASH1 contains +from 16 to 128 MiB, and is mapped to 0xF?000000 - 0xF7FFFFFF as U-Boot Flash +Bank #1 (with the starting address depending on the flash size detected at +runtime). The write-enable pin on FLASH0 is disabled, so the contents of FLASH0 +cannot be modified in the field. This also prevents FLASH0 from executing +commands to return chip information, so its configuration is hard-coded in +U-Boot. + +There are two versions of U-Boot for Korat: "permanent" and "upgradable". The +permanent U-Boot is pre-programmed at the top of FLASH0, e.g., at addresses +0xFFFA0000 - 0xFFFFFFFF for the current 384 KiB size. The upgradable U-Boot is +located 256 KiB from the top of FLASH1, e.g. at addresses 0xF7F6000 - 0xF7FC0000 +for the current 384 KiB size. FLASH1 addresses 0xF7FE0000 - 0xF7FF0000 are +used for the U-Boot environmental parameters, and addresses 0xF7FC0000 - +0xF7FDFFFF are used for the redundant copy of the parameters. These locations +are used by both versions of U-Boot. + +On booting, the permanent U-Boot in FLASH0 begins executing. After performing +minimal setup, it monitors the state of the board's Reset switch (GPIO47). If +the switch is sensed as open before a timeout period, then U-Boot branches to +address 0xF7FBFFFC. This causes the upgradable U-Boot to execute from the +beginning. If the switch remains closed thoughout the timeout period, the +permanent U-Boot activates the on-board buzzer until the switch is sensed as +opened. It then continues to execute without branching to FLASH1. The effect +of this is that normally the Korat board boots its upgradable U-Boot, but, if +this has been corrupted, the user can boot the permanent U-Boot, which can then +be used to erase and reload FLASH1 as needed. + +Note that it is not necessary for the permanent U-Boot to have all the latest +features, but only that it have sufficient functionality (working "tftp", +"erase", "cp.b", etc.) to repair FLASH1. Also, the permanent U-Boot makes no +assumptions about the size of FLASH1 or the size of the upgradable U-Boot: it is +sufficient that the upgradable U-Boot can be started by a branch to 0xF7FBFFFC. + +The build sequence: + + make korat_config + make all perm=1 + +builds the permanent U-Boot by selecting loader file "u-boot.lds" and defining +preprocessor symbol "CONFIG_KORAT_PERMANENT". The default build: + + make korat_config + make all + +creates the upgradable U-Boot but selecting loader file "u-boot-F7FC.lds" and +leaving preprocessor symbol "CONFIG_KORAT_PERMANENT" undefined. + +2008-02-22, Larry Johnson <lrj@acm.org> diff --git a/doc/README.sh b/doc/README.sh index 075d360..6baee08 100644 --- a/doc/README.sh +++ b/doc/README.sh @@ -1,6 +1,6 @@ U-Boot for Renesas SuperH - Last update 08/10/2007 by Nobuhiro Iwamatsu + Last update 01/18/2008 by Nobuhiro Iwamatsu ================================================================================ 0. What's this? @@ -18,7 +18,19 @@ U-Boot for Renesas SuperH 2. Supported CPUs 2.1. Renesas SH7750/SH7750R + This CPU has the SH4 core. + 2.2. Renesas SH7722 + This CPU has the SH4AL-DSP core. + + 2.3. Renesas SH7720 + This CPU has the SH3 core. + + 2.4. Renesas SH7710/SH7712 + This CPU has the SH3-DSP core and Ethernet controller. + + 2.5. Renesas SH7780 + This CPU has the SH4A core. ================================================================================ 3. Supported Boards @@ -26,10 +38,42 @@ U-Boot for Renesas SuperH 3.1. Hitachi UL MS7750SE01/MS7750RSE01 Board specific code is in board/ms7750se To use this board, type "make ms7750se_config". + Support devices are : + - SCIF + - SDRAM + - NOR Flash + - Marubun PCMCIA 3.2. Hitachi UL MS7722SE01 Board specific code is in board/ms7722se To use this board, type "make ms7722se_config". + Support devices are : + - SCIF + - SDRAM + - NOR Flash + - Marubun PCMCIA + - SMC91x ethernet + + 3.2. Hitachi UL MS7720ERP01 + Board specific code is in board/ms7720se + To use this board, type "make ms7720se_config". + Support devices are : + - SCIF + - SDRAM + - NOR Flash + - Marubun PCMCIA + + 3.3. Renesas R7780MP + Board specific code is in board/r7780mp + To use this board, type "make r7780mp_config". + Support devices are : + - SCIF + - DDR-SDRAM + - NOR Flash + - Compact Flash + - ASIX ethernet + - SH7780 PCI bridge + - RTL8110 ethernet ** README ** In SuperH, S-record and binary of made u-boot work on the memory. @@ -49,13 +93,12 @@ U-Boot for Renesas SuperH 5. Future I plan to support the following CPUs and boards. 5.1. CPUs - - SH7710/SH7712 (SH3) - - SH7780(SH4) + - SH7751R(SH4) - SH7785(SH4) 5.2. Boards - Many boards ;-) ================================================================================ -Copyright (c) 2007 +Copyright (c) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigaur.org> diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 29d6c03..071ef00 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -29,6 +29,7 @@ COBJS-y += fsl_i2c.o COBJS-y += omap1510_i2c.o COBJS-y += omap24xx_i2c.o COBJS-y += tsi108_i2c.o +COBJS-y += mxc_i2c.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c new file mode 100644 index 0000000..3c2a9cf --- /dev/null +++ b/drivers/i2c/mxc_i2c.c @@ -0,0 +1,207 @@ +/* + * i2c driver for Freescale mx31 + * + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#if defined(CONFIG_HARD_I2C) && defined(CONFIG_I2C_MXC) + +#include <asm/arch/mx31.h> +#include <asm/arch/mx31-regs.h> + +#define IADR 0x00 +#define IFDR 0x04 +#define I2CR 0x08 +#define I2SR 0x0c +#define I2DR 0x10 + +#define I2CR_IEN (1 << 7) +#define I2CR_IIEN (1 << 6) +#define I2CR_MSTA (1 << 5) +#define I2CR_MTX (1 << 4) +#define I2CR_TX_NO_AK (1 << 3) +#define I2CR_RSTA (1 << 2) + +#define I2SR_ICF (1 << 7) +#define I2SR_IBB (1 << 5) +#define I2SR_IIF (1 << 1) +#define I2SR_RX_NO_AK (1 << 0) + +#ifdef CFG_I2C_MX31_PORT1 +#define I2C_BASE 0x43f80000 +#elif defined(CFG_I2C_MX31_PORT2) +#define I2C_BASE 0x43f98000 +#elif defined(CFG_I2C_MX31_PORT3) +#define I2C_BASE 0x43f84000 +#else +#error "define CFG_I2C_MX31_PORTx to use the mx31 I2C driver" +#endif + +#ifdef DEBUG +#define DPRINTF(args...) printf(args) +#else +#define DPRINTF(args...) +#endif + +static u16 div[] = { 30, 32, 36, 42, 48, 52, 60, 72, 80, 88, 104, 128, 144, + 160, 192, 240, 288, 320, 384, 480, 576, 640, 768, 960, + 1152, 1280, 1536, 1920, 2304, 2560, 3072, 3840}; + +void i2c_init(int speed, int unused) +{ + int freq = mx31_get_ipg_clk(); + int i; + + for (i = 0; i < 0x1f; i++) + if (freq / div[i] <= speed) + break; + + DPRINTF("%s: speed: %d\n", __FUNCTION__, speed); + + __REG16(I2C_BASE + I2CR) = 0; /* Reset module */ + __REG16(I2C_BASE + IFDR) = i; + __REG16(I2C_BASE + I2CR) = I2CR_IEN; + __REG16(I2C_BASE + I2SR) = 0; +} + +static int wait_busy(void) +{ + int timeout = 10000; + + while (!(__REG16(I2C_BASE + I2SR) & I2SR_IIF) && --timeout) + udelay(1); + __REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */ + + return timeout; +} + +static int tx_byte(u8 byte) +{ + __REG16(I2C_BASE + I2DR) = byte; + + if (!wait_busy() || __REG16(I2C_BASE + I2SR) & I2SR_RX_NO_AK) + return -1; + return 0; +} + +static int rx_byte(void) +{ + if (!wait_busy()) + return -1; + + return __REG16(I2C_BASE + I2DR); +} + +int i2c_probe(uchar chip) +{ + int ret; + + __REG16(I2C_BASE + I2CR) = 0; /* Reset module */ + __REG16(I2C_BASE + I2CR) = I2CR_IEN; + + __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX; + ret = tx_byte(chip << 1); + __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MTX; + + return ret; +} + +static int i2c_addr(uchar chip, uint addr, int alen) +{ + __REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */ + __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX; + + if (tx_byte(chip << 1)) + return -1; + + while (alen--) + if (tx_byte((addr >> (alen * 8)) & 0xff)) + return -1; + return 0; +} + +int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) +{ + int timeout = 10000; + int ret; + + DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: +%d\n", \ + __FUNCTION__, chip, addr, alen, len); + + if (i2c_addr(chip, addr, alen)) { + printf("i2c_addr failed\n"); + return -1; + } + + __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | \ + I2CR_MTX | I2CR_RSTA; + + if (tx_byte(chip << 1 | 1)) + return -1; + + __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | ((len == 1) \ + ? I2CR_TX_NO_AK : 0); + + ret = __REG16(I2C_BASE + I2DR); + + while (len--) { + if ((ret = rx_byte()) < 0) + return -1; + *buf++ = ret; + if (len <= 1) + __REG16(I2C_BASE + I2CR) = I2CR_IEN | \ + I2CR_MSTA | I2CR_TX_NO_AK; + } + + wait_busy(); + + __REG16(I2C_BASE + I2CR) = I2CR_IEN; + + while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout) + udelay(1); + + return 0; +} + +int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) +{ + int timeout = 10000; + DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n", \ + __FUNCTION__, chip, addr, alen, len); + + if (i2c_addr(chip, addr, alen)) + return -1; + + while (len--) + if (tx_byte(*buf++)) + return -1; + + __REG16(I2C_BASE + I2CR) = I2CR_IEN; + + while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout) + udelay(1); + + return 0; +} + +#endif /* CONFIG_HARD_I2C */ diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 952e919..ff932a1 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -23,17 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libmtd.a +LIB := $(obj)libmtd.a COBJS-y += at45.o COBJS-y += cfi_flash.o -COBJS-y += dataflash.o +COBJS-$(CONFIG_HAS_DATAFLASH) += dataflash.o COBJS-y += mw_eeprom.o COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o COBJS := $(COBJS-y) -SRCS := $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index f04c72d..40fddcd 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -239,12 +239,14 @@ static u32 flash_read32(void *addr) return __raw_readl(addr); } -static u64 flash_read64(void *addr) +static u64 __flash_read64(void *addr) { /* No architectures currently implement __raw_readq() */ return *(volatile u64 *)addr; } +u64 flash_read64(void *addr)__attribute__((weak, alias("__flash_read64"))); + /*----------------------------------------------------------------------- */ #if defined(CFG_ENV_IS_IN_FLASH) || defined(CFG_ENV_ADDR_REDUND) || (CFG_MONITOR_BASE >= CFG_FLASH_BASE) @@ -365,6 +367,20 @@ static inline uchar flash_read_uchar (flash_info_t * info, uint offset) } /*----------------------------------------------------------------------- + * read a word at a port width address, assume 16bit bus + */ +static inline ushort flash_read_word (flash_info_t * info, uint offset) +{ + ushort *addr, retval; + + addr = flash_map (info, 0, offset); + retval = flash_read16 (addr); + flash_unmap (info, 0, offset, addr); + return retval; +} + + +/*----------------------------------------------------------------------- * read a long word by picking the least significant byte of each maximum * port size word. Swap for ppc format. */ @@ -1449,17 +1465,29 @@ static void cmdset_amd_read_jedec_ids(flash_info_t *info) flash_unlock_seq(info, 0); flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID); udelay(1000); /* some flash are slow to respond */ + info->manufacturer_id = flash_read_uchar (info, FLASH_OFFSET_MANUFACTURER_ID); - info->device_id = flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID); - if (info->device_id == 0x7E) { - /* AMD 3-byte (expanded) device ids */ - info->device_id2 = flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID2); - info->device_id2 <<= 8; - info->device_id2 |= flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID3); + + switch (info->chipwidth){ + case FLASH_CFI_8BIT: + info->device_id = flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID); + if (info->device_id == 0x7E) { + /* AMD 3-byte (expanded) device ids */ + info->device_id2 = flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID2); + info->device_id2 <<= 8; + info->device_id2 |= flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID3); + } + break; + case FLASH_CFI_16BIT: + info->device_id = flash_read_word (info, + FLASH_OFFSET_DEVICE_ID); + break; + default: + break; } flash_write_cmd(info, 0, 0, AMD_CMD_RESET); } diff --git a/drivers/mtd/dataflash.c b/drivers/mtd/dataflash.c index 36c99a0..d8f78f2 100644 --- a/drivers/mtd/dataflash.c +++ b/drivers/mtd/dataflash.c @@ -19,7 +19,6 @@ */ #include <common.h> #include <config.h> -#ifdef CONFIG_HAS_DATAFLASH #include <asm/hardware.h> #include <dataflash.h> @@ -31,7 +30,7 @@ struct dataflash_addr { int cs; }; -#ifdef CONFIG_AT91SAM9260EK +#if defined(CONFIG_AT91SAM9260EK) struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ {CFG_DATAFLASH_LOGIC_ADDR_CS1, 1} @@ -48,51 +47,13 @@ struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { #endif /*define the area offsets*/ -#if defined(CONFIG_AT91SAM9261EK) || defined(CONFIG_AT91SAM9260EK) || \ - defined(CONFIG_AT91SAM9263EK) || defined(CONFIG_AT91CAP9ADK) -#if defined(CONFIG_NEW_PARTITION) dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0x00000000, 0x00003FFF, FLAG_PROTECT_SET, 0, "Bootstrap"}, /* ROM code */ - {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, /* u-boot environment */ - {0x00008400, 0x0003DDFF, FLAG_PROTECT_SET, 0, "U-Boot"}, /* u-boot code */ - {0x0003DE00, 0x00041FFF, FLAG_PROTECT_CLEAR, FLAG_SETENV, "MON"}, /* Room for alternative boot monitor */ - {0x00042000, 0x0018BFFF, FLAG_PROTECT_CLEAR, FLAG_SETENV, "OS"}, /* data area size to tune */ - {0x0018C000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, FLAG_SETENV, "FS"}, /* data area size to tune */ + {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, + {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, + {0x00008400, 0x0003DDFF, FLAG_PROTECT_SET, 0, "U-Boot"}, + {0x0003DE00, 0x0023DE3F, FLAG_PROTECT_CLEAR, 0, "Kernel"}, + {0x0023DE40, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, }; -#else -dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0, 0x3fff, FLAG_PROTECT_SET}, /* ROM code */ - {0x4000, 0x7fff, FLAG_PROTECT_CLEAR}, /* u-boot environment */ - {0x8000, 0x37fff, FLAG_PROTECT_SET}, /* u-boot code */ - {0x38000, 0x1fffff, FLAG_PROTECT_CLEAR}, /* data area size to tune */ -}; -#endif -#elif defined(CONFIG_NEW_PARTITION) -/*define the area offsets*/ -/* Invalid partitions should be defined with start > end */ -dataflash_protect_t area_list[NB_DATAFLASH_AREA*CFG_MAX_DATAFLASH_BANKS] = { - {0x00000000, 0x000083ff, FLAG_PROTECT_SET, 0, "Bootstrap"}, /* ROM code */ - {0x00008400, 0x00020fff, FLAG_PROTECT_SET, 0, "U-Boot"}, /* u-boot code */ - {0x00021000, 0x000293ff, FLAG_PROTECT_CLEAR, 0, "Environment"}, /* u-boot environment 8Kb */ - {0x00029400, 0x00041fff, FLAG_PROTECT_INVALID, 0, "<Unused>"}, /* Rest of Sector 1 */ - {0x00042000, 0x0018Bfff, FLAG_PROTECT_CLEAR, FLAG_SETENV, "OS"}, /* data area size to tune */ - {0x0018C000, 0xffffffff, FLAG_PROTECT_CLEAR, FLAG_SETENV, "FS"}, /* data area size to tune */ - - {0x00000000, 0xffffffff, FLAG_PROTECT_CLEAR, FLAG_SETENV, "Data"}, /* data area */ - {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, "<Invalid>"}, /* Invalid */ - {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, "<Invalid>"}, /* Invalid */ - {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, "<Invalid>"}, /* Invalid */ - {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, "<Invalid>"}, /* Invalid */ - {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, "<Invalid>"}, /* Invalid */ -}; -#else -dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0, 0x7fff, FLAG_PROTECT_SET}, /* ROM code */ - {0x8000, 0x1ffff, FLAG_PROTECT_SET}, /* u-boot code */ - {0x20000, 0x27fff, FLAG_PROTECT_CLEAR}, /* u-boot environment */ - {0x28000, 0x1fffff, FLAG_PROTECT_CLEAR}, /* data area size to tune */ -}; -#endif extern void AT91F_SpiInit (void); extern int AT91F_DataflashProbe (int i, AT91PS_DataflashDesc pDesc); @@ -108,7 +69,7 @@ int AT91F_DataflashInit (void) { int i, j; int dfcode; - int part = 0; + int part; int last_part; int found[CFG_MAX_DATAFLASH_BANKS]; unsigned char protected; @@ -181,7 +142,8 @@ int AT91F_DataflashInit (void) (dataflash_info[i].Device.pages_number * dataflash_info[i].Device.pages_size)-1; - last_part=0; + part = 0; + last_part = 0; /* set the area addresses */ for(j = 0; j<NB_DATAFLASH_AREA; j++) { if(found[i]!=0) { @@ -224,6 +186,7 @@ int AT91F_DataflashSetEnv (void) unsigned char env; unsigned char s[32]; /* Will fit a long int in hex */ unsigned long start; + for (i = 0, part= 0; i < CFG_MAX_DATAFLASH_BANKS; i++) { for(j = 0; j<NB_DATAFLASH_AREA; j++) { env = area_list[part].setenv; @@ -297,9 +260,8 @@ void dataflash_print_info (void) } } - /*---------------------------------------------------------------------------*/ -/* Function Name : AT91F_DataflashSelect */ +/* Function Name : AT91F_DataflashSelect */ /* Object : Select the correct device */ /*---------------------------------------------------------------------------*/ AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash, @@ -326,7 +288,7 @@ AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash, } /*---------------------------------------------------------------------------*/ -/* Function Name : addr_dataflash */ +/* Function Name : addr_dataflash */ /* Object : Test if address is valid */ /*---------------------------------------------------------------------------*/ int addr_dataflash (unsigned long addr) @@ -344,8 +306,9 @@ int addr_dataflash (unsigned long addr) return addr_valid; } + /*---------------------------------------------------------------------------*/ -/* Function Name : size_dataflash */ +/* Function Name : size_dataflash */ /* Object : Test if address is valid regarding the size */ /*---------------------------------------------------------------------------*/ int size_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr, @@ -361,13 +324,15 @@ int size_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr, return 1; } + /*---------------------------------------------------------------------------*/ -/* Function Name : prot_dataflash */ +/* Function Name : prot_dataflash */ /* Object : Test if destination area is protected */ /*---------------------------------------------------------------------------*/ int prot_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr) { -int area; + int area; + /* find area */ for (area=0; area < NB_DATAFLASH_AREA; area++) { if ((addr >= pdataFlash->pDevice->area_list[area].start) && @@ -385,6 +350,7 @@ int area; return 1; } + /*--------------------------------------------------------------------------*/ /* Function Name : dataflash_real_protect */ /* Object : protect/unprotect area */ @@ -392,7 +358,8 @@ int area; int dataflash_real_protect (int flag, unsigned long start_addr, unsigned long end_addr) { -int i,j, area1, area2, addr_valid = 0; + int i,j, area1, area2, addr_valid = 0; + /* find dataflash */ for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) { if ((((int) start_addr) & 0xF0000000) == @@ -435,7 +402,7 @@ int i,j, area1, area2, addr_valid = 0; } /*---------------------------------------------------------------------------*/ -/* Function Name : read_dataflash */ +/* Function Name : read_dataflash */ /* Object : dataflash memory read */ /*---------------------------------------------------------------------------*/ int read_dataflash (unsigned long addr, unsigned long size, char *result) @@ -454,9 +421,8 @@ int read_dataflash (unsigned long addr, unsigned long size, char *result) return (AT91F_DataFlashRead (pFlash, AddrToRead, size, result)); } - /*---------------------------------------------------------------------------*/ -/* Function Name : write_dataflash */ +/* Function Name : write_dataflash */ /* Object : write a block in dataflash */ /*---------------------------------------------------------------------------*/ int write_dataflash (unsigned long addr_dest, unsigned long addr_src, @@ -483,7 +449,6 @@ int write_dataflash (unsigned long addr_dest, unsigned long addr_src, AddrToWrite, size); } - void dataflash_perror (int err) { switch (err) { @@ -509,5 +474,3 @@ void dataflash_perror (int err) break; } } - -#endif diff --git a/drivers/mtd/jedec_flash.c b/drivers/mtd/jedec_flash.c index 41aad3b..b958d17 100644 --- a/drivers/mtd/jedec_flash.c +++ b/drivers/mtd/jedec_flash.c @@ -216,6 +216,25 @@ static const struct amd_flash_info jedec_table[] = { } }, #endif +#ifdef CFG_FLASH_LEGACY_512Kx16 + { + .mfr_id = MANUFACTURER_AMD, + .dev_id = AM29LV400BB, + .name = "AMD AM29LV400BB", + .uaddr = { + [1] = MTD_UADDR_0x0555_0x02AA /* x16 */ + }, + .DevSize = SIZE_512KiB, + .CmdSet = CFI_CMDSET_AMD_LEGACY, + .NumEraseRegions= 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,7), + } + }, +#endif }; static inline void fill_info(flash_info_t *info, const struct amd_flash_info *jedec_entry, ulong base) diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 320dc3e..6f0225b 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -35,6 +35,7 @@ COBJS-y += e1000.o COBJS-y += eepro100.o COBJS-y += enc28j60.o COBJS-y += fsl_mcdmafec.o +COBJS-$(CONFIG_GRETH) += greth.o COBJS-y += inca-ip_sw.o COBJS-y += ks8695eth.o COBJS-y += lan91c96.o @@ -54,6 +55,7 @@ COBJS-y += rtl8139.o COBJS-y += rtl8169.o COBJS-y += s3c4510b_eth.o COBJS-y += smc91111.o +COBJS-y += smc911x.o COBJS-y += tigon3.o COBJS-y += tsec.o COBJS-y += tsi108_eth.o diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index f0741da..4a72252 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -1,5 +1,5 @@ /************************************************************************** -Inter Pro 1000 for ppcboot/das-u-boot +Intel Pro 1000 for ppcboot/das-u-boot Drivers are port from Intel's Linux driver e1000-4.3.15 and from Etherboot pro 1000 driver by mrakes at vivato dot net tested on both gig copper and gig fiber boards @@ -82,6 +82,7 @@ static struct pci_device_id supported[] = { {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82545EM_FIBER}, {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82546EB_FIBER}, {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82540EM_LOM}, + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82541ER}, }; /* Function forward declarations */ @@ -512,6 +513,11 @@ e1000_read_mac_addr(struct eth_device *nic) /* Invert the last bit if this is the second device */ nic->enetaddr[5] += 1; } +#ifdef CONFIG_E1000_FALLBACK_MAC + if ( *(u32*)(nic->enetaddr) == 0 || *(u32*)(nic->enetaddr) == ~0 ) + for ( i=0; i < NODE_ADDRESS_SIZE; i++ ) + nic->enetaddr[i] = (CONFIG_E1000_FALLBACK_MAC >> (8*(5-i))) & 0xff; +#endif #else /* * The AP1000's e1000 has no eeprom; the MAC address is stored in the @@ -639,6 +645,9 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82546EB_FIBER: hw->mac_type = e1000_82546; break; + case E1000_DEV_ID_82541ER: + hw->mac_type = e1000_82541_rev_2; + break; default: /* Should never have loaded on this device */ return -E1000_ERR_MAC_TYPE; @@ -2485,6 +2494,36 @@ e1000_phy_reset(struct e1000_hw *hw) return 0; } +static int +e1000_set_phy_type(struct e1000_hw *hw) +{ + DEBUGFUNC(); + + if(hw->mac_type == e1000_undefined) + return -E1000_ERR_PHY_TYPE; + + switch(hw->phy_id) { + case M88E1000_E_PHY_ID: + case M88E1000_I_PHY_ID: + case M88E1011_I_PHY_ID: + hw->phy_type = e1000_phy_m88; + break; + case IGP01E1000_I_PHY_ID: + if(hw->mac_type == e1000_82541 || + hw->mac_type == e1000_82541_rev_2) { + hw->phy_type = e1000_phy_igp; + break; + } + /* Fall Through */ + default: + /* Should never have loaded on this device */ + hw->phy_type = e1000_phy_undefined; + return -E1000_ERR_PHY_TYPE; + } + + return E1000_SUCCESS; +} + /****************************************************************************** * Probes the expected PHY address for known PHY IDs * @@ -2493,6 +2532,7 @@ e1000_phy_reset(struct e1000_hw *hw) static int e1000_detect_gig_phy(struct e1000_hw *hw) { + int32_t phy_init_status; uint16_t phy_id_high, phy_id_low; int match = FALSE; @@ -2526,11 +2566,19 @@ e1000_detect_gig_phy(struct e1000_hw *hw) if (hw->phy_id == M88E1011_I_PHY_ID) match = TRUE; break; + case e1000_82541_rev_2: + if(hw->phy_id == IGP01E1000_I_PHY_ID) + match = TRUE; + + break; default: DEBUGOUT("Invalid MAC type %d\n", hw->mac_type); return -E1000_ERR_CONFIG; } - if (match) { + + phy_init_status = e1000_set_phy_type(hw); + + if ((match) && (phy_init_status == E1000_SUCCESS)) { DEBUGOUT("PHY ID 0x%X detected\n", hw->phy_id); return 0; } @@ -2985,7 +3033,7 @@ e1000_initialize(bd_t * bis) free(nic); return 0; } -#ifndef CONFIG_AP1000 +#if !(defined(CONFIG_AP1000) || defined(CONFIG_MVBC_1G)) if (e1000_validate_eeprom_checksum(nic) < 0) { printf("The EEPROM Checksum Is Not Valid\n"); free(hw); diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index 0fbdc90..822afc5 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -71,6 +71,8 @@ typedef enum { e1000_82540, e1000_82545, e1000_82546, + e1000_82541, + e1000_82541_rev_2, e1000_num_macs } e1000_mac_type; @@ -168,6 +170,13 @@ typedef enum { e1000_1000t_rx_status_undefined = 0xFF } e1000_1000t_rx_status; +typedef enum { + e1000_phy_m88 = 0, + e1000_phy_igp, + e1000_phy_igp_2, + e1000_phy_undefined = 0xFF +} e1000_phy_type; + struct e1000_phy_info { e1000_cable_length cable_length; e1000_10bt_ext_dist_enable extended_10bt_distance; @@ -184,14 +193,19 @@ struct e1000_phy_stats { }; /* Error Codes */ -#define E1000_SUCCESS 0 -#define E1000_ERR_EEPROM 1 -#define E1000_ERR_PHY 2 -#define E1000_ERR_CONFIG 3 -#define E1000_ERR_PARAM 4 -#define E1000_ERR_MAC_TYPE 5 -#define E1000_ERR_NOLINK 6 -#define E1000_ERR_TIMEOUT 7 +#define E1000_SUCCESS 0 +#define E1000_ERR_EEPROM 1 +#define E1000_ERR_PHY 2 +#define E1000_ERR_CONFIG 3 +#define E1000_ERR_PARAM 4 +#define E1000_ERR_MAC_TYPE 5 +#define E1000_ERR_PHY_TYPE 6 +#define E1000_ERR_NOLINK 7 +#define E1000_ERR_TIMEOUT 8 +#define E1000_ERR_RESET 9 +#define E1000_ERR_MASTER_REQUESTS_PENDING 10 +#define E1000_ERR_HOST_INTERFACE_COMMAND 11 +#define E1000_BLK_PHY_RESET 12 /* PCI Device IDs */ #define E1000_DEV_ID_82542 0x1000 @@ -207,7 +221,8 @@ struct e1000_phy_stats { #define E1000_DEV_ID_82545EM_FIBER 0x1011 #define E1000_DEV_ID_82546EB_COPPER 0x1010 #define E1000_DEV_ID_82546EB_FIBER 0x1012 -#define NUM_DEV_IDS 13 +#define E1000_DEV_ID_82541ER 0x1078 +#define NUM_DEV_IDS 14 #define NODE_ADDRESS_SIZE 6 #define ETH_LENGTH_OF_ADDRESS 6 @@ -799,6 +814,8 @@ struct e1000_hw { pci_dev_t pdev; uint8_t *hw_addr; e1000_mac_type mac_type; + e1000_phy_type phy_type; + uint32_t phy_init_script; e1000_media_type media_type; e1000_lan_loc lan_loc; e1000_fc_type fc; @@ -1517,7 +1534,22 @@ struct e1000_hw { #define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */ #define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */ -#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ +#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ + +/* IGP01E1000 specifics */ +#define IGP01E1000_IEEE_REGS_PAGE 0x0000 +#define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300 +#define IGP01E1000_IEEE_FORCE_GIGA 0x0140 + +/* IGP01E1000 Specific Registers */ +#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */ +#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */ +#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */ +#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */ +#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */ +#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */ +#define IGP02E1000_PHY_POWER_MGMT 0x19 +#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */ /* PHY Control Register */ #define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ @@ -1729,6 +1761,7 @@ struct e1000_hw { #define M88E1011_I_PHY_ID 0x01410C20 #define M88E1000_12_PHY_ID M88E1000_E_PHY_ID #define M88E1000_14_PHY_ID M88E1000_E_PHY_ID +#define IGP01E1000_I_PHY_ID 0x02A80380 /* Miscellaneous PHY bit definitions. */ #define PHY_PREAMBLE 0xFFFFFFFF diff --git a/drivers/net/greth.c b/drivers/net/greth.c new file mode 100644 index 0000000..76ece59 --- /dev/null +++ b/drivers/net/greth.c @@ -0,0 +1,661 @@ +/* Gaisler.com GRETH 10/100/1000 Ethernet MAC driver + * + * Driver use polling mode (no Interrupt) + * + * (C) Copyright 2007 + * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <net.h> +#include <malloc.h> +#include <asm/processor.h> +#include <ambapp.h> +#include <asm/leon.h> + +/* #define DEBUG */ + +#include "greth.h" + +/* Default to 3s timeout on autonegotiation */ +#ifndef GRETH_PHY_TIMEOUT_MS +#define GRETH_PHY_TIMEOUT_MS 3000 +#endif + +/* ByPass Cache when reading regs */ +#define GRETH_REGLOAD(addr) SPARC_NOCACHE_READ(addr) +/* Write-through cache ==> no bypassing needed on writes */ +#define GRETH_REGSAVE(addr,data) (*(unsigned int *)(addr) = (data)) +#define GRETH_REGORIN(addr,data) GRETH_REGSAVE(addr,GRETH_REGLOAD(addr)|data) +#define GRETH_REGANDIN(addr,data) GRETH_REGSAVE(addr,GRETH_REGLOAD(addr)&data) + +#define GRETH_RXBD_CNT 4 +#define GRETH_TXBD_CNT 1 + +#define GRETH_RXBUF_SIZE 1540 +#define GRETH_BUF_ALIGN 4 +#define GRETH_RXBUF_EFF_SIZE \ + ( (GRETH_RXBUF_SIZE&~(GRETH_BUF_ALIGN-1))+GRETH_BUF_ALIGN ) + +typedef struct { + greth_regs *regs; + int irq; + struct eth_device *dev; + + /* Hardware info */ + unsigned char phyaddr; + int gbit_mac; + + /* Current operating Mode */ + int gb; /* GigaBit */ + int fd; /* Full Duplex */ + int sp; /* 10/100Mbps speed (1=100,0=10) */ + int auto_neg; /* Auto negotiate done */ + + unsigned char hwaddr[6]; /* MAC Address */ + + /* Descriptors */ + greth_bd *rxbd_base, *rxbd_max; + greth_bd *txbd_base, *txbd_max; + + greth_bd *rxbd_curr; + + /* rx buffers in rx descriptors */ + void *rxbuf_base; /* (GRETH_RXBUF_SIZE+ALIGNBYTES) * GRETH_RXBD_CNT */ + + /* unused for gbit_mac, temp buffer for sending packets with unligned + * start. + * Pointer to packet allocated with malloc. + */ + void *txbuf; + + struct { + /* rx status */ + unsigned int rx_packets, + rx_crc_errors, rx_frame_errors, rx_length_errors, rx_errors; + + /* tx stats */ + unsigned int tx_packets, + tx_latecol_errors, + tx_underrun_errors, tx_limit_errors, tx_errors; + } stats; +} greth_priv; + +/* Read MII register 'addr' from core 'regs' */ +static int read_mii(int addr, volatile greth_regs * regs) +{ + while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) { + } + + GRETH_REGSAVE(®s->mdio, (0 << 11) | ((addr & 0x1F) << 6) | 2); + + while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) { + } + + if (!(GRETH_REGLOAD(®s->mdio) & GRETH_MII_NVALID)) { + return (GRETH_REGLOAD(®s->mdio) >> 16) & 0xFFFF; + } else { + return -1; + } +} + +static void write_mii(int addr, int data, volatile greth_regs * regs) +{ + while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) { + } + + GRETH_REGSAVE(®s->mdio, + ((data & 0xFFFF) << 16) | (0 << 11) | ((addr & 0x1F) << 6) + | 1); + + while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) { + } + +} + +/* init/start hardware and allocate descriptor buffers for rx side + * + */ +int greth_init(struct eth_device *dev, bd_t * bis) +{ + int i; + + greth_priv *greth = dev->priv; + greth_regs *regs = greth->regs; +#ifdef DEBUG + printf("greth_init\n"); +#endif + + GRETH_REGSAVE(®s->control, 0); + + if (!greth->rxbd_base) { + + /* allocate descriptors */ + greth->rxbd_base = (greth_bd *) + memalign(0x1000, GRETH_RXBD_CNT * sizeof(greth_bd)); + greth->txbd_base = (greth_bd *) + memalign(0x1000, GRETH_RXBD_CNT * sizeof(greth_bd)); + + /* allocate buffers to all descriptors */ + greth->rxbuf_base = + malloc(GRETH_RXBUF_EFF_SIZE * GRETH_RXBD_CNT); + } + + /* initate rx decriptors */ + for (i = 0; i < GRETH_RXBD_CNT; i++) { + greth->rxbd_base[i].addr = (unsigned int) + greth->rxbuf_base + (GRETH_RXBUF_EFF_SIZE * i); + /* enable desciptor & set wrap bit if last descriptor */ + if (i >= (GRETH_RXBD_CNT - 1)) { + greth->rxbd_base[i].stat = GRETH_BD_EN | GRETH_BD_WR; + } else { + greth->rxbd_base[i].stat = GRETH_BD_EN; + } + } + + /* initiate indexes */ + greth->rxbd_curr = greth->rxbd_base; + greth->rxbd_max = greth->rxbd_base + (GRETH_RXBD_CNT - 1); + greth->txbd_max = greth->txbd_base + (GRETH_TXBD_CNT - 1); + /* + * greth->txbd_base->addr = 0; + * greth->txbd_base->stat = GRETH_BD_WR; + */ + + /* initate tx decriptors */ + for (i = 0; i < GRETH_TXBD_CNT; i++) { + greth->txbd_base[i].addr = 0; + /* enable desciptor & set wrap bit if last descriptor */ + if (i >= (GRETH_RXBD_CNT - 1)) { + greth->txbd_base[i].stat = GRETH_BD_WR; + } else { + greth->txbd_base[i].stat = 0; + } + } + + /**** SET HARDWARE REGS ****/ + + /* Set pointer to tx/rx descriptor areas */ + GRETH_REGSAVE(®s->rx_desc_p, (unsigned int)&greth->rxbd_base[0]); + GRETH_REGSAVE(®s->tx_desc_p, (unsigned int)&greth->txbd_base[0]); + + /* Enable Transmitter, GRETH will now scan descriptors for packets + * to transmitt */ +#ifdef DEBUG + printf("greth_init: enabling receiver\n"); +#endif + GRETH_REGORIN(®s->control, GRETH_RXEN); + + return 0; +} + +/* Initiate PHY to a relevant speed + * return: + * - 0 = success + * - 1 = timeout/fail + */ +int greth_init_phy(greth_priv * dev, bd_t * bis) +{ + greth_regs *regs = dev->regs; + int tmp, tmp1, tmp2, i; + unsigned int start, timeout; + + /* X msecs to ticks */ + timeout = usec2ticks(GRETH_PHY_TIMEOUT_MS * 1000); + + /* Get system timer0 current value + * Total timeout is 5s + */ + start = get_timer(0); + + /* get phy control register default values */ + + while ((tmp = read_mii(0, regs)) & 0x8000) { + if (get_timer(start) > timeout) + return 1; /* Fail */ + } + + /* reset PHY and wait for completion */ + write_mii(0, 0x8000 | tmp, regs); + + while (((tmp = read_mii(0, regs))) & 0x8000) { + if (get_timer(start) > timeout) + return 1; /* Fail */ + } + + /* Check if PHY is autoneg capable and then determine operating + * mode, otherwise force it to 10 Mbit halfduplex + */ + dev->gb = 0; + dev->fd = 0; + dev->sp = 0; + dev->auto_neg = 0; + if (!((tmp >> 12) & 1)) { + write_mii(0, 0, regs); + } else { + /* wait for auto negotiation to complete and then check operating mode */ + dev->auto_neg = 1; + i = 0; + while (!(((tmp = read_mii(1, regs)) >> 5) & 1)) { + if (get_timer(start) > timeout) { + printf("Auto negotiation timed out. " + "Selecting default config\n"); + tmp = read_mii(0, regs); + dev->gb = ((tmp >> 6) & 1) + && !((tmp >> 13) & 1); + dev->sp = !((tmp >> 6) & 1) + && ((tmp >> 13) & 1); + dev->fd = (tmp >> 8) & 1; + goto auto_neg_done; + } + } + if ((tmp >> 8) & 1) { + tmp1 = read_mii(9, regs); + tmp2 = read_mii(10, regs); + if ((tmp1 & GRETH_MII_EXTADV_1000FD) && + (tmp2 & GRETH_MII_EXTPRT_1000FD)) { + dev->gb = 1; + dev->fd = 1; + } + if ((tmp1 & GRETH_MII_EXTADV_1000HD) && + (tmp2 & GRETH_MII_EXTPRT_1000HD)) { + dev->gb = 1; + dev->fd = 0; + } + } + if ((dev->gb == 0) || ((dev->gb == 1) && (dev->gbit_mac == 0))) { + tmp1 = read_mii(4, regs); + tmp2 = read_mii(5, regs); + if ((tmp1 & GRETH_MII_100TXFD) && + (tmp2 & GRETH_MII_100TXFD)) { + dev->sp = 1; + dev->fd = 1; + } + if ((tmp1 & GRETH_MII_100TXHD) && + (tmp2 & GRETH_MII_100TXHD)) { + dev->sp = 1; + dev->fd = 0; + } + if ((tmp1 & GRETH_MII_10FD) && (tmp2 & GRETH_MII_10FD)) { + dev->fd = 1; + } + if ((dev->gb == 1) && (dev->gbit_mac == 0)) { + dev->gb = 0; + dev->fd = 0; + write_mii(0, dev->sp << 13, regs); + } + } + + } + auto_neg_done: +#ifdef DEBUG + printf("%s GRETH Ethermac at [0x%x] irq %d. Running \ + %d Mbps %s duplex\n", dev->gbit_mac ? "10/100/1000" : "10/100", (unsigned int)(regs), (unsigned int)(dev->irq), dev->gb ? 1000 : (dev->sp ? 100 : 10), dev->fd ? "full" : "half"); +#endif + /* Read out PHY info if extended registers are available */ + if (tmp & 1) { + tmp1 = read_mii(2, regs); + tmp2 = read_mii(3, regs); + tmp1 = (tmp1 << 6) | ((tmp2 >> 10) & 0x3F); + tmp = tmp2 & 0xF; + + tmp2 = (tmp2 >> 4) & 0x3F; +#ifdef DEBUG + printf("PHY: Vendor %x Device %x Revision %d\n", tmp1, + tmp2, tmp); +#endif + } else { + printf("PHY info not available\n"); + } + + /* set speed and duplex bits in control register */ + GRETH_REGORIN(®s->control, + (dev->gb << 8) | (dev->sp << 7) | (dev->fd << 4)); + + return 0; +} + +void greth_halt(struct eth_device *dev) +{ + greth_priv *greth; + greth_regs *regs; + int i; +#ifdef DEBUG + printf("greth_halt\n"); +#endif + if (!dev || !dev->priv) + return; + + greth = dev->priv; + regs = greth->regs; + + if (!regs) + return; + + /* disable receiver/transmitter by clearing the enable bits */ + GRETH_REGANDIN(®s->control, ~(GRETH_RXEN | GRETH_TXEN)); + + /* reset rx/tx descriptors */ + if (greth->rxbd_base) { + for (i = 0; i < GRETH_RXBD_CNT; i++) { + greth->rxbd_base[i].stat = + (i >= (GRETH_RXBD_CNT - 1)) ? GRETH_BD_WR : 0; + } + } + + if (greth->txbd_base) { + for (i = 0; i < GRETH_TXBD_CNT; i++) { + greth->txbd_base[i].stat = + (i >= (GRETH_TXBD_CNT - 1)) ? GRETH_BD_WR : 0; + } + } +} + +int greth_send(struct eth_device *dev, volatile void *eth_data, int data_length) +{ + greth_priv *greth = dev->priv; + greth_regs *regs = greth->regs; + greth_bd *txbd; + void *txbuf; + unsigned int status; +#ifdef DEBUG + printf("greth_send\n"); +#endif + /* send data, wait for data to be sent, then return */ + if (((unsigned int)eth_data & (GRETH_BUF_ALIGN - 1)) + && !greth->gbit_mac) { + /* data not aligned as needed by GRETH 10/100, solve this by allocating 4 byte aligned buffer + * and copy data to before giving it to GRETH. + */ + if (!greth->txbuf) { + greth->txbuf = malloc(GRETH_RXBUF_SIZE); +#ifdef DEBUG + printf("GRETH: allocated aligned tx-buf\n"); +#endif + } + + txbuf = greth->txbuf; + + /* copy data info buffer */ + memcpy((char *)txbuf, (char *)eth_data, data_length); + + /* keep buffer to next time */ + } else { + txbuf = (void *)eth_data; + } + /* get descriptor to use, only 1 supported... hehe easy */ + txbd = greth->txbd_base; + + /* setup descriptor to wrap around to it self */ + txbd->addr = (unsigned int)txbuf; + txbd->stat = GRETH_BD_EN | GRETH_BD_WR | data_length; + + /* Remind Core which descriptor to use when sending */ + GRETH_REGSAVE(®s->tx_desc_p, (unsigned int)txbd); + + /* initate send by enabling transmitter */ + GRETH_REGORIN(®s->control, GRETH_TXEN); + + /* Wait for data to be sent */ + while ((status = GRETH_REGLOAD(&txbd->stat)) & GRETH_BD_EN) { + ; + } + + /* was the packet transmitted succesfully? */ + if (status & GRETH_TXBD_ERR_AL) { + greth->stats.tx_limit_errors++; + } + + if (status & GRETH_TXBD_ERR_UE) { + greth->stats.tx_underrun_errors++; + } + + if (status & GRETH_TXBD_ERR_LC) { + greth->stats.tx_latecol_errors++; + } + + if (status & + (GRETH_TXBD_ERR_LC | GRETH_TXBD_ERR_UE | GRETH_TXBD_ERR_AL)) { + /* any error */ + greth->stats.tx_errors++; + return -1; + } + + /* bump tx packet counter */ + greth->stats.tx_packets++; + + /* return succefully */ + return 0; +} + +int greth_recv(struct eth_device *dev) +{ + greth_priv *greth = dev->priv; + greth_regs *regs = greth->regs; + greth_bd *rxbd; + unsigned int status, len = 0, bad; + unsigned char *d; + int enable = 0; + int i; +#ifdef DEBUG +/* printf("greth_recv\n"); */ +#endif + /* Receive One packet only, but clear as many error packets as there are + * available. + */ + { + /* current receive descriptor */ + rxbd = greth->rxbd_curr; + + /* get status of next received packet */ + status = GRETH_REGLOAD(&rxbd->stat); + + bad = 0; + + /* stop if no more packets received */ + if (status & GRETH_BD_EN) { + goto done; + } +#ifdef DEBUG + printf("greth_recv: packet 0x%lx, 0x%lx, len: %d\n", + (unsigned int)rxbd, status, status & GRETH_BD_LEN); +#endif + + /* Check status for errors. + */ + if (status & GRETH_RXBD_ERR_FT) { + greth->stats.rx_length_errors++; + bad = 1; + } + if (status & (GRETH_RXBD_ERR_AE | GRETH_RXBD_ERR_OE)) { + greth->stats.rx_frame_errors++; + bad = 1; + } + if (status & GRETH_RXBD_ERR_CRC) { + greth->stats.rx_crc_errors++; + bad = 1; + } + if (bad) { + greth->stats.rx_errors++; + printf + ("greth_recv: Bad packet (%d, %d, %d, 0x%08x, %d)\n", + greth->stats.rx_length_errors, + greth->stats.rx_frame_errors, + greth->stats.rx_crc_errors, status, + greth->stats.rx_packets); + /* print all rx descriptors */ + for (i = 0; i < GRETH_RXBD_CNT; i++) { + printf("[%d]: Stat=0x%lx, Addr=0x%lx\n", i, + GRETH_REGLOAD(&greth->rxbd_base[i].stat), + GRETH_REGLOAD(&greth->rxbd_base[i]. + addr)); + } + } else { + /* Process the incoming packet. */ + len = status & GRETH_BD_LEN; + d = (char *)rxbd->addr; +#ifdef DEBUG + printf + ("greth_recv: new packet, length: %d. data: %x %x %x %x %x %x %x %x\n", + len, d[0], d[1], d[2], d[3], d[4], d[5], d[6], + d[7]); +#endif + /* flush all data cache to make sure we're not reading old packet data */ + sparc_dcache_flush_all(); + + /* pass packet on to network subsystem */ + NetReceive((void *)d, len); + + /* bump stats counters */ + greth->stats.rx_packets++; + + /* bad is now 0 ==> will stop loop */ + } + + /* reenable descriptor to receive more packet with this descriptor, wrap around if needed */ + rxbd->stat = + GRETH_BD_EN | + (((unsigned int)greth->rxbd_curr >= + (unsigned int)greth->rxbd_max) ? GRETH_BD_WR : 0); + enable = 1; + + /* increase index */ + greth->rxbd_curr = + ((unsigned int)greth->rxbd_curr >= + (unsigned int)greth->rxbd_max) ? greth-> + rxbd_base : (greth->rxbd_curr + 1); + + }; + + if (enable) { + GRETH_REGORIN(®s->control, GRETH_RXEN); + } + done: + /* return positive length of packet or 0 if non recieved */ + return len; +} + +void greth_set_hwaddr(greth_priv * greth, unsigned char *mac) +{ + /* save new MAC address */ + greth->dev->enetaddr[0] = greth->hwaddr[0] = mac[0]; + greth->dev->enetaddr[1] = greth->hwaddr[1] = mac[1]; + greth->dev->enetaddr[2] = greth->hwaddr[2] = mac[2]; + greth->dev->enetaddr[3] = greth->hwaddr[3] = mac[3]; + greth->dev->enetaddr[4] = greth->hwaddr[4] = mac[4]; + greth->dev->enetaddr[5] = greth->hwaddr[5] = mac[5]; + greth->regs->esa_msb = (mac[0] << 8) | mac[1]; + greth->regs->esa_lsb = + (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5]; +#ifdef DEBUG + printf("GRETH: New MAC address: %02x:%02x:%02x:%02x:%02x:%02x\n", + mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); +#endif +} + +int greth_initialize(bd_t * bis) +{ + greth_priv *greth; + ambapp_apbdev apbdev; + struct eth_device *dev; + int i; + char *addr_str, *end; + unsigned char addr[6]; +#ifdef DEBUG + printf("Scanning for GRETH\n"); +#endif + /* Find Device & IRQ via AMBA Plug&Play information */ + if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_ETHMAC, &apbdev) != 1) { + return -1; /* GRETH not found */ + } + + greth = (greth_priv *) malloc(sizeof(greth_priv)); + dev = (struct eth_device *)malloc(sizeof(struct eth_device)); + memset(dev, 0, sizeof(struct eth_device)); + memset(greth, 0, sizeof(greth_priv)); + + greth->regs = (greth_regs *) apbdev.address; + greth->irq = apbdev.irq; +#ifdef DEBUG + printf("Found GRETH at 0x%lx, irq %d\n", greth->regs, greth->irq); +#endif + dev->priv = (void *)greth; + dev->iobase = (unsigned int)greth->regs; + dev->init = greth_init; + dev->halt = greth_halt; + dev->send = greth_send; + dev->recv = greth_recv; + greth->dev = dev; + + /* Reset Core */ + GRETH_REGSAVE(&greth->regs->control, GRETH_RESET); + + /* Wait for core to finish reset cycle */ + while (GRETH_REGLOAD(&greth->regs->control) & GRETH_RESET) ; + + /* Get the phy address which assumed to have been set + correctly with the reset value in hardware */ + greth->phyaddr = (GRETH_REGLOAD(&greth->regs->mdio) >> 11) & 0x1F; + + /* Check if mac is gigabit capable */ + greth->gbit_mac = (GRETH_REGLOAD(&greth->regs->control) >> 27) & 1; + + /* Make descriptor string */ + if (greth->gbit_mac) { + sprintf(dev->name, "GRETH 10/100/GB"); + } else { + sprintf(dev->name, "GRETH 10/100"); + } + + /* initiate PHY, select speed/duplex depending on connected PHY */ + if (greth_init_phy(greth, bis)) { + /* Failed to init PHY (timedout) */ + return -1; + } + + /* Register Device to EtherNet subsystem */ + eth_register(dev); + + /* Get MAC address */ + if ((addr_str = getenv("ethaddr")) != NULL) { + for (i = 0; i < 6; i++) { + addr[i] = + addr_str ? simple_strtoul(addr_str, &end, 16) : 0; + if (addr_str) { + addr_str = (*end) ? end + 1 : end; + } + } + } else { + /* HW Address not found in environment, Set default HW address */ + addr[0] = GRETH_HWADDR_0; /* MSB */ + addr[1] = GRETH_HWADDR_1; + addr[2] = GRETH_HWADDR_2; + addr[3] = GRETH_HWADDR_3; + addr[4] = GRETH_HWADDR_4; + addr[5] = GRETH_HWADDR_5; /* LSB */ + } + + /* set and remember MAC address */ + greth_set_hwaddr(greth, addr); + + return 1; +} diff --git a/drivers/net/greth.h b/drivers/net/greth.h new file mode 100644 index 0000000..7d5fbd3 --- /dev/null +++ b/drivers/net/greth.h @@ -0,0 +1,97 @@ +/* Gaisler.com GRETH 10/100/1000 Ethernet MAC driver + * + * (C) Copyright 2007 + * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define GRETH_FD 0x10 +#define GRETH_RESET 0x40 +#define GRETH_MII_BUSY 0x8 +#define GRETH_MII_NVALID 0x10 + +/* MII registers */ +#define GRETH_MII_EXTADV_1000FD 0x00000200 +#define GRETH_MII_EXTADV_1000HD 0x00000100 +#define GRETH_MII_EXTPRT_1000FD 0x00000800 +#define GRETH_MII_EXTPRT_1000HD 0x00000400 + +#define GRETH_MII_100T4 0x00000200 +#define GRETH_MII_100TXFD 0x00000100 +#define GRETH_MII_100TXHD 0x00000080 +#define GRETH_MII_10FD 0x00000040 +#define GRETH_MII_10HD 0x00000020 + +#define GRETH_BD_EN 0x800 +#define GRETH_BD_WR 0x1000 +#define GRETH_BD_IE 0x2000 +#define GRETH_BD_LEN 0x7FF + +#define GRETH_TXEN 0x1 +#define GRETH_INT_TX 0x8 +#define GRETH_TXI 0x4 +#define GRETH_TXBD_STATUS 0x0001C000 +#define GRETH_TXBD_MORE 0x20000 +#define GRETH_TXBD_IPCS 0x40000 +#define GRETH_TXBD_TCPCS 0x80000 +#define GRETH_TXBD_UDPCS 0x100000 +#define GRETH_TXBD_ERR_LC 0x10000 +#define GRETH_TXBD_ERR_UE 0x4000 +#define GRETH_TXBD_ERR_AL 0x8000 +#define GRETH_TXBD_NUM 128 +#define GRETH_TXBD_NUM_MASK (GRETH_TXBD_NUM-1) +#define GRETH_TX_BUF_SIZE 2048 + +#define GRETH_INT_RX 0x4 +#define GRETH_RXEN 0x2 +#define GRETH_RXI 0x8 +#define GRETH_RXBD_STATUS 0xFFFFC000 +#define GRETH_RXBD_ERR_AE 0x4000 +#define GRETH_RXBD_ERR_FT 0x8000 +#define GRETH_RXBD_ERR_CRC 0x10000 +#define GRETH_RXBD_ERR_OE 0x20000 +#define GRETH_RXBD_ERR_LE 0x40000 +#define GRETH_RXBD_IP_DEC 0x80000 +#define GRETH_RXBD_IP_CSERR 0x100000 +#define GRETH_RXBD_UDP_DEC 0x200000 +#define GRETH_RXBD_UDP_CSERR 0x400000 +#define GRETH_RXBD_TCP_DEC 0x800000 +#define GRETH_RXBD_TCP_CSERR 0x1000000 + +#define GRETH_RXBD_NUM 128 +#define GRETH_RXBD_NUM_MASK (GRETH_RXBD_NUM-1) +#define GRETH_RX_BUF_SIZE 2048 + +/* Ethernet configuration registers */ +typedef struct _greth_regs { + volatile unsigned int control; + volatile unsigned int status; + volatile unsigned int esa_msb; + volatile unsigned int esa_lsb; + volatile unsigned int mdio; + volatile unsigned int tx_desc_p; + volatile unsigned int rx_desc_p; +} greth_regs; + +/* Ethernet buffer descriptor */ +typedef struct _greth_bd { + volatile unsigned int stat; + unsigned int addr; /* Buffer address not changed by HW */ +} greth_bd; diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 9c98338..703784e 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -417,13 +417,13 @@ static int macb_init(struct eth_device *netdev, bd_t *bd) /* choose RMII or MII mode. This depends on the board */ #ifdef CONFIG_RMII -#ifdef CONFIG_AT91CAP9ADK +#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, 0); #endif #else -#ifdef CONFIG_AT91CAP9ADK +#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) macb_writel(macb, USRIO, MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, MACB_BIT(MII)); diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 3b81258..71d1960 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -166,6 +166,13 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) /* Activate transmit Buffer Descriptor polling */ fecp->tdar = 0x01000000; /* Descriptor polling active */ + /* FEC fix for MCF5275, FEC unable to initial transmit data packet. + * A nop will ensure the descriptor polling active completed. + */ +#ifdef CONFIG_M5275 + __asm__ ("nop"); +#endif + #ifdef CFG_UNIFY_CACHE icache_invalid(); #endif diff --git a/drivers/net/smc91111.h b/drivers/net/smc91111.h index 8dcbb3e..96ff04d 100644 --- a/drivers/net/smc91111.h +++ b/drivers/net/smc91111.h @@ -79,7 +79,7 @@ typedef unsigned long int dword; #ifdef CONFIG_XSENGINE #define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1)))) #define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r<<1)))) -#define SMC_inb(p) ({ \ +#define SMC_inb(p) ({ \ unsigned int __p = (unsigned int)(SMC_BASE_ADDRESS + (p<<1)); \ unsigned int __v = *(volatile unsigned short *)((__p) & ~2); \ if (__p & 2) __v >>= 8; \ @@ -176,7 +176,76 @@ typedef unsigned long int dword; }; \ }) -#else /* if not CONFIG_PXA250 */ +#elif defined(CONFIG_LEON) /* if not CONFIG_PXA250 */ + +#define SMC_LEON_SWAP16(_x_) ({ word _x = (_x_); ((_x << 8) | (_x >> 8)); }) + +#define SMC_LEON_SWAP32(_x_) \ + ({ dword _x = (_x_); \ + ((_x << 24) | \ + ((0x0000FF00UL & _x) << 8) | \ + ((0x00FF0000UL & _x) >> 8) | \ + (_x >> 24)); }) + +#define SMC_inl(r) (SMC_LEON_SWAP32((*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0))))) +#define SMC_inl_nosw(r) ((*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0)))) +#define SMC_inw(r) (SMC_LEON_SWAP16((*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0))))) +#define SMC_inw_nosw(r) ((*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0)))) +#define SMC_inb(p) ({ \ + word ___v = SMC_inw((p) & ~1); \ + if ((p) & 1) ___v >>= 8; \ + else ___v &= 0xff; \ + ___v; }) + +#define SMC_outl(d,r) (*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0))=SMC_LEON_SWAP32(d)) +#define SMC_outl_nosw(d,r) (*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0))=(d)) +#define SMC_outw(d,r) (*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0))=SMC_LEON_SWAP16(d)) +#define SMC_outw_nosw(d,r) (*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0))=(d)) +#define SMC_outb(d,r) do{ word __d = (byte)(d); \ + word __w = SMC_inw((r)&~1); \ + __w &= ((r)&1) ? 0x00FF : 0xFF00; \ + __w |= ((r)&1) ? __d<<8 : __d; \ + SMC_outw(__w,(r)&~1); \ + }while(0) +#define SMC_outsl(r,b,l) do{ int __i; \ + dword *__b2; \ + __b2 = (dword *) b; \ + for (__i = 0; __i < l; __i++) { \ + SMC_outl_nosw( *(__b2 + __i), r); \ + } \ + }while(0) +#define SMC_outsw(r,b,l) do{ int __i; \ + word *__b2; \ + __b2 = (word *) b; \ + for (__i = 0; __i < l; __i++) { \ + SMC_outw_nosw( *(__b2 + __i), r); \ + } \ + }while(0) +#define SMC_insl(r,b,l) do{ int __i ; \ + dword *__b2; \ + __b2 = (dword *) b; \ + for (__i = 0; __i < l; __i++) { \ + *(__b2 + __i) = SMC_inl_nosw(r); \ + }; \ + }while(0) + +#define SMC_insw(r,b,l) do{ int __i ; \ + word *__b2; \ + __b2 = (word *) b; \ + for (__i = 0; __i < l; __i++) { \ + *(__b2 + __i) = SMC_inw_nosw(r); \ + }; \ + }while(0) + +#define SMC_insb(r,b,l) do{ int __i ; \ + byte *__b2; \ + __b2 = (byte *) b; \ + for (__i = 0; __i < l; __i++) { \ + *(__b2 + __i) = SMC_inb(r); \ + }; \ + }while(0) + +#else /* if not CONFIG_PXA250 and not CONFIG_LEON */ #ifndef CONFIG_SMC_USE_IOFUNCS /* these macros don't work on some boards */ /* diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c new file mode 100644 index 0000000..2fd5777 --- /dev/null +++ b/drivers/net/smc911x.c @@ -0,0 +1,680 @@ +/* + * SMSC LAN9[12]1[567] Network driver + * + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#ifdef CONFIG_DRIVER_SMC911X + +#include <command.h> +#include <net.h> +#include <miiphy.h> + +#define mdelay(n) udelay((n)*1000) + +#define __REG(x) (*((volatile u32 *)(x))) + +/* Below are the register offsets and bit definitions + * of the Lan911x memory space + */ +#define RX_DATA_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x00) + +#define TX_DATA_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x20) +#define TX_CMD_A_INT_ON_COMP (0x80000000) +#define TX_CMD_A_INT_BUF_END_ALGN (0x03000000) +#define TX_CMD_A_INT_4_BYTE_ALGN (0x00000000) +#define TX_CMD_A_INT_16_BYTE_ALGN (0x01000000) +#define TX_CMD_A_INT_32_BYTE_ALGN (0x02000000) +#define TX_CMD_A_INT_DATA_OFFSET (0x001F0000) +#define TX_CMD_A_INT_FIRST_SEG (0x00002000) +#define TX_CMD_A_INT_LAST_SEG (0x00001000) +#define TX_CMD_A_BUF_SIZE (0x000007FF) +#define TX_CMD_B_PKT_TAG (0xFFFF0000) +#define TX_CMD_B_ADD_CRC_DISABLE (0x00002000) +#define TX_CMD_B_DISABLE_PADDING (0x00001000) +#define TX_CMD_B_PKT_BYTE_LENGTH (0x000007FF) + +#define RX_STATUS_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x40) +#define RX_STS_PKT_LEN (0x3FFF0000) +#define RX_STS_ES (0x00008000) +#define RX_STS_BCST (0x00002000) +#define RX_STS_LEN_ERR (0x00001000) +#define RX_STS_RUNT_ERR (0x00000800) +#define RX_STS_MCAST (0x00000400) +#define RX_STS_TOO_LONG (0x00000080) +#define RX_STS_COLL (0x00000040) +#define RX_STS_ETH_TYPE (0x00000020) +#define RX_STS_WDOG_TMT (0x00000010) +#define RX_STS_MII_ERR (0x00000008) +#define RX_STS_DRIBBLING (0x00000004) +#define RX_STS_CRC_ERR (0x00000002) +#define RX_STATUS_FIFO_PEEK __REG(CONFIG_DRIVER_SMC911X_BASE + 0x44) +#define TX_STATUS_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x48) +#define TX_STS_TAG (0xFFFF0000) +#define TX_STS_ES (0x00008000) +#define TX_STS_LOC (0x00000800) +#define TX_STS_NO_CARR (0x00000400) +#define TX_STS_LATE_COLL (0x00000200) +#define TX_STS_MANY_COLL (0x00000100) +#define TX_STS_COLL_CNT (0x00000078) +#define TX_STS_MANY_DEFER (0x00000004) +#define TX_STS_UNDERRUN (0x00000002) +#define TX_STS_DEFERRED (0x00000001) +#define TX_STATUS_FIFO_PEEK __REG(CONFIG_DRIVER_SMC911X_BASE + 0x4C) +#define ID_REV __REG(CONFIG_DRIVER_SMC911X_BASE + 0x50) +#define ID_REV_CHIP_ID (0xFFFF0000) /* RO */ +#define ID_REV_REV_ID (0x0000FFFF) /* RO */ + +#define INT_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x54) +#define INT_CFG_INT_DEAS (0xFF000000) /* R/W */ +#define INT_CFG_INT_DEAS_CLR (0x00004000) +#define INT_CFG_INT_DEAS_STS (0x00002000) +#define INT_CFG_IRQ_INT (0x00001000) /* RO */ +#define INT_CFG_IRQ_EN (0x00000100) /* R/W */ +#define INT_CFG_IRQ_POL (0x00000010) /* R/W */ + /* Not Affected by SW Reset */ +#define INT_CFG_IRQ_TYPE (0x00000001) /* R/W */ + /* Not Affected by SW Reset */ + +#define INT_STS __REG(CONFIG_DRIVER_SMC911X_BASE + 0x58) +#define INT_STS_SW_INT (0x80000000) /* R/WC */ +#define INT_STS_TXSTOP_INT (0x02000000) /* R/WC */ +#define INT_STS_RXSTOP_INT (0x01000000) /* R/WC */ +#define INT_STS_RXDFH_INT (0x00800000) /* R/WC */ +#define INT_STS_RXDF_INT (0x00400000) /* R/WC */ +#define INT_STS_TX_IOC (0x00200000) /* R/WC */ +#define INT_STS_RXD_INT (0x00100000) /* R/WC */ +#define INT_STS_GPT_INT (0x00080000) /* R/WC */ +#define INT_STS_PHY_INT (0x00040000) /* RO */ +#define INT_STS_PME_INT (0x00020000) /* R/WC */ +#define INT_STS_TXSO (0x00010000) /* R/WC */ +#define INT_STS_RWT (0x00008000) /* R/WC */ +#define INT_STS_RXE (0x00004000) /* R/WC */ +#define INT_STS_TXE (0x00002000) /* R/WC */ +/*#define INT_STS_ERX (0x00001000)*/ /* R/WC */ +#define INT_STS_TDFU (0x00000800) /* R/WC */ +#define INT_STS_TDFO (0x00000400) /* R/WC */ +#define INT_STS_TDFA (0x00000200) /* R/WC */ +#define INT_STS_TSFF (0x00000100) /* R/WC */ +#define INT_STS_TSFL (0x00000080) /* R/WC */ +/*#define INT_STS_RXDF (0x00000040)*/ /* R/WC */ +#define INT_STS_RDFO (0x00000040) /* R/WC */ +#define INT_STS_RDFL (0x00000020) /* R/WC */ +#define INT_STS_RSFF (0x00000010) /* R/WC */ +#define INT_STS_RSFL (0x00000008) /* R/WC */ +#define INT_STS_GPIO2_INT (0x00000004) /* R/WC */ +#define INT_STS_GPIO1_INT (0x00000002) /* R/WC */ +#define INT_STS_GPIO0_INT (0x00000001) /* R/WC */ +#define INT_EN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x5C) +#define INT_EN_SW_INT_EN (0x80000000) /* R/W */ +#define INT_EN_TXSTOP_INT_EN (0x02000000) /* R/W */ +#define INT_EN_RXSTOP_INT_EN (0x01000000) /* R/W */ +#define INT_EN_RXDFH_INT_EN (0x00800000) /* R/W */ +/*#define INT_EN_RXDF_INT_EN (0x00400000)*/ /* R/W */ +#define INT_EN_TIOC_INT_EN (0x00200000) /* R/W */ +#define INT_EN_RXD_INT_EN (0x00100000) /* R/W */ +#define INT_EN_GPT_INT_EN (0x00080000) /* R/W */ +#define INT_EN_PHY_INT_EN (0x00040000) /* R/W */ +#define INT_EN_PME_INT_EN (0x00020000) /* R/W */ +#define INT_EN_TXSO_EN (0x00010000) /* R/W */ +#define INT_EN_RWT_EN (0x00008000) /* R/W */ +#define INT_EN_RXE_EN (0x00004000) /* R/W */ +#define INT_EN_TXE_EN (0x00002000) /* R/W */ +/*#define INT_EN_ERX_EN (0x00001000)*/ /* R/W */ +#define INT_EN_TDFU_EN (0x00000800) /* R/W */ +#define INT_EN_TDFO_EN (0x00000400) /* R/W */ +#define INT_EN_TDFA_EN (0x00000200) /* R/W */ +#define INT_EN_TSFF_EN (0x00000100) /* R/W */ +#define INT_EN_TSFL_EN (0x00000080) /* R/W */ +/*#define INT_EN_RXDF_EN (0x00000040)*/ /* R/W */ +#define INT_EN_RDFO_EN (0x00000040) /* R/W */ +#define INT_EN_RDFL_EN (0x00000020) /* R/W */ +#define INT_EN_RSFF_EN (0x00000010) /* R/W */ +#define INT_EN_RSFL_EN (0x00000008) /* R/W */ +#define INT_EN_GPIO2_INT (0x00000004) /* R/W */ +#define INT_EN_GPIO1_INT (0x00000002) /* R/W */ +#define INT_EN_GPIO0_INT (0x00000001) /* R/W */ + +#define BYTE_TEST __REG(CONFIG_DRIVER_SMC911X_BASE + 0x64) +#define FIFO_INT __REG(CONFIG_DRIVER_SMC911X_BASE + 0x68) +#define FIFO_INT_TX_AVAIL_LEVEL (0xFF000000) /* R/W */ +#define FIFO_INT_TX_STS_LEVEL (0x00FF0000) /* R/W */ +#define FIFO_INT_RX_AVAIL_LEVEL (0x0000FF00) /* R/W */ +#define FIFO_INT_RX_STS_LEVEL (0x000000FF) /* R/W */ + +#define RX_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x6C) +#define RX_CFG_RX_END_ALGN (0xC0000000) /* R/W */ +#define RX_CFG_RX_END_ALGN4 (0x00000000) /* R/W */ +#define RX_CFG_RX_END_ALGN16 (0x40000000) /* R/W */ +#define RX_CFG_RX_END_ALGN32 (0x80000000) /* R/W */ +#define RX_CFG_RX_DMA_CNT (0x0FFF0000) /* R/W */ +#define RX_CFG_RX_DUMP (0x00008000) /* R/W */ +#define RX_CFG_RXDOFF (0x00001F00) /* R/W */ +/*#define RX_CFG_RXBAD (0x00000001)*/ /* R/W */ + +#define TX_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x70) +/*#define TX_CFG_TX_DMA_LVL (0xE0000000)*/ /* R/W */ +/*#define TX_CFG_TX_DMA_CNT (0x0FFF0000)*/ /* R/W */ + /* Self Clearing */ +#define TX_CFG_TXS_DUMP (0x00008000) + /* Self Clearing */ +#define TX_CFG_TXD_DUMP (0x00004000) + /* Self Clearing */ +#define TX_CFG_TXSAO (0x00000004) /* R/W */ +#define TX_CFG_TX_ON (0x00000002) /* R/W */ +#define TX_CFG_STOP_TX (0x00000001) + /* Self Clearing */ + +#define HW_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x74) +#define HW_CFG_TTM (0x00200000) /* R/W */ +#define HW_CFG_SF (0x00100000) /* R/W */ +#define HW_CFG_TX_FIF_SZ (0x000F0000) /* R/W */ +#define HW_CFG_TR (0x00003000) /* R/W */ +#define HW_CFG_PHY_CLK_SEL (0x00000060) /* R/W */ +#define HW_CFG_PHY_CLK_SEL_INT_PHY (0x00000000) /* R/W */ +#define HW_CFG_PHY_CLK_SEL_EXT_PHY (0x00000020) /* R/W */ +#define HW_CFG_PHY_CLK_SEL_CLK_DIS (0x00000040) /* R/W */ +#define HW_CFG_SMI_SEL (0x00000010) /* R/W */ +#define HW_CFG_EXT_PHY_DET (0x00000008) /* RO */ +#define HW_CFG_EXT_PHY_EN (0x00000004) /* R/W */ +#define HW_CFG_32_16_BIT_MODE (0x00000004) /* RO */ +#define HW_CFG_SRST_TO (0x00000002) /* RO */ +#define HW_CFG_SRST (0x00000001) + /* Self Clearing */ + +#define RX_DP_CTRL __REG(CONFIG_DRIVER_SMC911X_BASE + 0x78) +#define RX_DP_CTRL_RX_FFWD (0x80000000) /* R/W */ +#define RX_DP_CTRL_FFWD_BUSY (0x80000000) /* RO */ + +#define RX_FIFO_INF __REG(CONFIG_DRIVER_SMC911X_BASE + 0x7C) +#define RX_FIFO_INF_RXSUSED (0x00FF0000) /* RO */ +#define RX_FIFO_INF_RXDUSED (0x0000FFFF) /* RO */ + +#define TX_FIFO_INF __REG(CONFIG_DRIVER_SMC911X_BASE + 0x80) +#define TX_FIFO_INF_TSUSED (0x00FF0000) /* RO */ +#define TX_FIFO_INF_TDFREE (0x0000FFFF) /* RO */ + +#define PMT_CTRL __REG(CONFIG_DRIVER_SMC911X_BASE + 0x84) +#define PMT_CTRL_PM_MODE (0x00003000) + /* Self Clearing */ +#define PMT_CTRL_PHY_RST (0x00000400) + /* Self Clearing */ +#define PMT_CTRL_WOL_EN (0x00000200) /* R/W */ +#define PMT_CTRL_ED_EN (0x00000100) /* R/W */ +#define PMT_CTRL_PME_TYPE (0x00000040) /* R/W */ + /* Not Affected by SW Reset */ +#define PMT_CTRL_WUPS (0x00000030) /* R/WC */ +#define PMT_CTRL_WUPS_NOWAKE (0x00000000) /* R/WC */ +#define PMT_CTRL_WUPS_ED (0x00000010) /* R/WC */ +#define PMT_CTRL_WUPS_WOL (0x00000020) /* R/WC */ +#define PMT_CTRL_WUPS_MULTI (0x00000030) /* R/WC */ +#define PMT_CTRL_PME_IND (0x00000008) /* R/W */ +#define PMT_CTRL_PME_POL (0x00000004) /* R/W */ +#define PMT_CTRL_PME_EN (0x00000002) /* R/W */ + /* Not Affected by SW Reset */ +#define PMT_CTRL_READY (0x00000001) /* RO */ + +#define GPIO_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x88) +#define GPIO_CFG_LED3_EN (0x40000000) /* R/W */ +#define GPIO_CFG_LED2_EN (0x20000000) /* R/W */ +#define GPIO_CFG_LED1_EN (0x10000000) /* R/W */ +#define GPIO_CFG_GPIO2_INT_POL (0x04000000) /* R/W */ +#define GPIO_CFG_GPIO1_INT_POL (0x02000000) /* R/W */ +#define GPIO_CFG_GPIO0_INT_POL (0x01000000) /* R/W */ +#define GPIO_CFG_EEPR_EN (0x00700000) /* R/W */ +#define GPIO_CFG_GPIOBUF2 (0x00040000) /* R/W */ +#define GPIO_CFG_GPIOBUF1 (0x00020000) /* R/W */ +#define GPIO_CFG_GPIOBUF0 (0x00010000) /* R/W */ +#define GPIO_CFG_GPIODIR2 (0x00000400) /* R/W */ +#define GPIO_CFG_GPIODIR1 (0x00000200) /* R/W */ +#define GPIO_CFG_GPIODIR0 (0x00000100) /* R/W */ +#define GPIO_CFG_GPIOD4 (0x00000010) /* R/W */ +#define GPIO_CFG_GPIOD3 (0x00000008) /* R/W */ +#define GPIO_CFG_GPIOD2 (0x00000004) /* R/W */ +#define GPIO_CFG_GPIOD1 (0x00000002) /* R/W */ +#define GPIO_CFG_GPIOD0 (0x00000001) /* R/W */ + +#define GPT_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x8C) +#define GPT_CFG_TIMER_EN (0x20000000) /* R/W */ +#define GPT_CFG_GPT_LOAD (0x0000FFFF) /* R/W */ + +#define GPT_CNT __REG(CONFIG_DRIVER_SMC911X_BASE + 0x90) +#define GPT_CNT_GPT_CNT (0x0000FFFF) /* RO */ + +#define ENDIAN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x98) +#define FREE_RUN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x9C) +#define RX_DROP __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA0) +#define MAC_CSR_CMD __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA4) +#define MAC_CSR_CMD_CSR_BUSY (0x80000000) + /* Self Clearing */ +#define MAC_CSR_CMD_R_NOT_W (0x40000000) /* R/W */ +#define MAC_CSR_CMD_CSR_ADDR (0x000000FF) /* R/W */ + +#define MAC_CSR_DATA __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA8) +#define AFC_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0xAC) +#define AFC_CFG_AFC_HI (0x00FF0000) /* R/W */ +#define AFC_CFG_AFC_LO (0x0000FF00) /* R/W */ +#define AFC_CFG_BACK_DUR (0x000000F0) /* R/W */ +#define AFC_CFG_FCMULT (0x00000008) /* R/W */ +#define AFC_CFG_FCBRD (0x00000004) /* R/W */ +#define AFC_CFG_FCADD (0x00000002) /* R/W */ +#define AFC_CFG_FCANY (0x00000001) /* R/W */ + +#define E2P_CMD __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB0) +#define E2P_CMD_EPC_BUSY (0x80000000) + /* Self Clearing */ +#define E2P_CMD_EPC_CMD (0x70000000) /* R/W */ +#define E2P_CMD_EPC_CMD_READ (0x00000000) /* R/W */ +#define E2P_CMD_EPC_CMD_EWDS (0x10000000) /* R/W */ +#define E2P_CMD_EPC_CMD_EWEN (0x20000000) /* R/W */ +#define E2P_CMD_EPC_CMD_WRITE (0x30000000) /* R/W */ +#define E2P_CMD_EPC_CMD_WRAL (0x40000000) /* R/W */ +#define E2P_CMD_EPC_CMD_ERASE (0x50000000) /* R/W */ +#define E2P_CMD_EPC_CMD_ERAL (0x60000000) /* R/W */ +#define E2P_CMD_EPC_CMD_RELOAD (0x70000000) /* R/W */ +#define E2P_CMD_EPC_TIMEOUT (0x00000200) /* RO */ +#define E2P_CMD_MAC_ADDR_LOADED (0x00000100) /* RO */ +#define E2P_CMD_EPC_ADDR (0x000000FF) /* R/W */ + +#define E2P_DATA __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB4) +#define E2P_DATA_EEPROM_DATA (0x000000FF) /* R/W */ +/* end of LAN register offsets and bit definitions */ + +/* MAC Control and Status registers */ +#define MAC_CR (0x01) /* R/W */ + +/* MAC_CR - MAC Control Register */ +#define MAC_CR_RXALL (0x80000000) +/* TODO: delete this bit? It is not described in the data sheet. */ +#define MAC_CR_HBDIS (0x10000000) +#define MAC_CR_RCVOWN (0x00800000) +#define MAC_CR_LOOPBK (0x00200000) +#define MAC_CR_FDPX (0x00100000) +#define MAC_CR_MCPAS (0x00080000) +#define MAC_CR_PRMS (0x00040000) +#define MAC_CR_INVFILT (0x00020000) +#define MAC_CR_PASSBAD (0x00010000) +#define MAC_CR_HFILT (0x00008000) +#define MAC_CR_HPFILT (0x00002000) +#define MAC_CR_LCOLL (0x00001000) +#define MAC_CR_BCAST (0x00000800) +#define MAC_CR_DISRTY (0x00000400) +#define MAC_CR_PADSTR (0x00000100) +#define MAC_CR_BOLMT_MASK (0x000000C0) +#define MAC_CR_DFCHK (0x00000020) +#define MAC_CR_TXEN (0x00000008) +#define MAC_CR_RXEN (0x00000004) + +#define ADDRH (0x02) /* R/W mask 0x0000FFFFUL */ +#define ADDRL (0x03) /* R/W mask 0xFFFFFFFFUL */ +#define HASHH (0x04) /* R/W */ +#define HASHL (0x05) /* R/W */ + +#define MII_ACC (0x06) /* R/W */ +#define MII_ACC_PHY_ADDR (0x0000F800) +#define MII_ACC_MIIRINDA (0x000007C0) +#define MII_ACC_MII_WRITE (0x00000002) +#define MII_ACC_MII_BUSY (0x00000001) + +#define MII_DATA (0x07) /* R/W mask 0x0000FFFFUL */ + +#define FLOW (0x08) /* R/W */ +#define FLOW_FCPT (0xFFFF0000) +#define FLOW_FCPASS (0x00000004) +#define FLOW_FCEN (0x00000002) +#define FLOW_FCBSY (0x00000001) + +#define VLAN1 (0x09) /* R/W mask 0x0000FFFFUL */ +#define VLAN1_VTI1 (0x0000ffff) + +#define VLAN2 (0x0A) /* R/W mask 0x0000FFFFUL */ +#define VLAN2_VTI2 (0x0000ffff) + +#define WUFF (0x0B) /* WO */ + +#define WUCSR (0x0C) /* R/W */ +#define WUCSR_GUE (0x00000200) +#define WUCSR_WUFR (0x00000040) +#define WUCSR_MPR (0x00000020) +#define WUCSR_WAKE_EN (0x00000004) +#define WUCSR_MPEN (0x00000002) + +/* Chip ID values */ +#define CHIP_9115 0x115 +#define CHIP_9116 0x116 +#define CHIP_9117 0x117 +#define CHIP_9118 0x118 +#define CHIP_9215 0x115a +#define CHIP_9216 0x116a +#define CHIP_9217 0x117a +#define CHIP_9218 0x118a + +struct chip_id { + u16 id; + char *name; +}; + +static const struct chip_id chip_ids[] = { + { CHIP_9115, "LAN9115" }, + { CHIP_9116, "LAN9116" }, + { CHIP_9117, "LAN9117" }, + { CHIP_9118, "LAN9118" }, + { CHIP_9215, "LAN9215" }, + { CHIP_9216, "LAN9216" }, + { CHIP_9217, "LAN9217" }, + { CHIP_9218, "LAN9218" }, + { 0, NULL }, +}; + +#define DRIVERNAME "smc911x" + +u32 smc911x_get_mac_csr(u8 reg) +{ + while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); + MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg; + while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); + + return MAC_CSR_DATA; +} + +void smc911x_set_mac_csr(u8 reg, u32 data) +{ + while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); + MAC_CSR_DATA = data; + MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | reg; + while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); } + +static int smx911x_handle_mac_address(bd_t *bd) +{ + unsigned long addrh, addrl; + unsigned char *m = bd->bi_enetaddr; + + /* if the environment has a valid mac address then use it */ + if ((m[0] | m[1] | m[2] | m[3] | m[4] | m[5])) { + addrl = m[0] | m[1] << 8 | m[2] << 16 | m[3] << 24; + addrh = m[4] | m[5] << 8; + smc911x_set_mac_csr(ADDRH, addrh); + smc911x_set_mac_csr(ADDRL, addrl); + } else { + /* if not, try to get one from the eeprom */ + addrh = smc911x_get_mac_csr(ADDRH); + addrl = smc911x_get_mac_csr(ADDRL); + + m[0] = (addrl) & 0xff; + m[1] = (addrl >> 8) & 0xff; + m[2] = (addrl >> 16) & 0xff; + m[3] = (addrl >> 24) & 0xff; + m[4] = (addrh) & 0xff; + m[5] = (addrh >> 8) & 0xff; + + /* we get 0xff when there is no eeprom connected */ + if ((m[0] & m[1] & m[2] & m[3] & m[4] & m[5]) == 0xff) { + printf(DRIVERNAME ": no valid mac address " + "in environment " + "and no eeprom found\n"); + return -1; + } + } + + printf(DRIVERNAME ": MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + m[0], m[1], m[2], m[3], m[4], m[5]); + + return 0; +} + +static int smc911x_miiphy_read(u8 phy, u8 reg, u16 *val) +{ + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + + smc911x_set_mac_csr(MII_ACC, phy << 11 | reg << 6 | MII_ACC_MII_BUSY); + + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + + *val = smc911x_get_mac_csr(MII_DATA); + + return 0; +} + +static int smc911x_miiphy_write(u8 phy, u8 reg, u16 val) +{ + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + + smc911x_set_mac_csr(MII_DATA, val); + smc911x_set_mac_csr(MII_ACC, + phy << 11 | reg << 6 | MII_ACC_MII_BUSY | MII_ACC_MII_WRITE); + + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + return 0; +} + +static int smc911x_phy_reset(void) +{ + u32 reg; + + reg = PMT_CTRL; + reg &= ~0xfffff030; + reg |= PMT_CTRL_PHY_RST; + PMT_CTRL = reg; + + mdelay(100); + + return 0; +} + +static void smc911x_phy_configure(void) +{ + int timeout; + u16 status; + + smc911x_phy_reset(); + + smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_RESET); + mdelay(1); + smc911x_miiphy_write(1, PHY_ANAR, 0x01e1); + smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); + + timeout = 5000; + do { + mdelay(1); + if ((timeout--) == 0) + goto err_out; + + if (smc911x_miiphy_read(1, PHY_BMSR, &status) != 0) + goto err_out; + } while (!(status & PHY_BMSR_LS)); + + printf(DRIVERNAME ": phy initialized\n"); + + return; + +err_out: + printf(DRIVERNAME ": autonegotiation timed out\n"); } + +static void smc911x_reset(void) +{ + int timeout; + + /* Take out of PM setting first */ + if (PMT_CTRL & PMT_CTRL_READY) { + /* Write to the bytetest will take out of powerdown */ + BYTE_TEST = 0x0; + + timeout = 10; + + while (timeout-- && !(PMT_CTRL & PMT_CTRL_READY)) + udelay(10); + if (!timeout) { + printf(DRIVERNAME + ": timeout waiting for PM restore\n"); + return; + } + } + + /* Disable interrupts */ + INT_EN = 0; + + HW_CFG = HW_CFG_SRST; + + timeout = 1000; + while (timeout-- && E2P_CMD & E2P_CMD_EPC_BUSY) + udelay(10); + + if (!timeout) { + printf(DRIVERNAME ": reset timeout\n"); + return; + } + + /* Reset the FIFO level and flow control settings */ + smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN); + AFC_CFG = 0x0050287F; + + /* Set to LED outputs */ + GPIO_CFG = 0x70070000; +} + +static void smc911x_enable(void) +{ + /* Enable TX */ + HW_CFG = 8 << 16 | HW_CFG_SF; + + GPT_CFG = GPT_CFG_TIMER_EN | 10000; + + TX_CFG = TX_CFG_TX_ON; + + /* no padding to start of packets */ + RX_CFG = 0; + + smc911x_set_mac_csr(MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS); + +} + +int eth_init(bd_t *bd) +{ + unsigned long val, i; + + printf(DRIVERNAME ": initializing\n"); + + val = BYTE_TEST; + if (val != 0x87654321) { + printf(DRIVERNAME ": Invalid chip endian 0x08%x\n", val); + goto err_out; + } + + val = ID_REV >> 16; + for (i = 0; chip_ids[i].id != 0; i++) { + if (chip_ids[i].id == val) + break; + } + if (!chip_ids[i].id) { + printf(DRIVERNAME ": Unknown chip ID %04x\n", val); + goto err_out; + } + + printf(DRIVERNAME ": detected %s controller\n", chip_ids[i].name); + + smc911x_reset(); + + /* Configure the PHY, initialize the link state */ + smc911x_phy_configure(); + + if (smx911x_handle_mac_address(bd)) + goto err_out; + + /* Turn on Tx + Rx */ + smc911x_enable(); + + return 0; + +err_out: + return -1; +} + +int eth_send(volatile void *packet, int length) +{ + u32 *data = (u32 *)packet; + u32 tmplen; + u32 status; + + TX_DATA_FIFO = TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length; + TX_DATA_FIFO = length; + + tmplen = (length + 3) / 4; + + while (tmplen--) + TX_DATA_FIFO = *data++; + + /* wait for transmission */ + while (!((TX_FIFO_INF & TX_FIFO_INF_TSUSED) >> 16)); + + /* get status. Ignore 'no carrier' error, it has no meaning for + * full duplex operation + */ + status = TX_STATUS_FIFO & (TX_STS_LOC | TX_STS_LATE_COLL | + TX_STS_MANY_COLL | TX_STS_MANY_DEFER | TX_STS_UNDERRUN); + + if (!status) + return 0; + + printf(DRIVERNAME ": failed to send packet: %s%s%s%s%s\n", + status & TX_STS_LOC ? "TX_STS_LOC " : "", + status & TX_STS_LATE_COLL ? "TX_STS_LATE_COLL " : "", + status & TX_STS_MANY_COLL ? "TX_STS_MANY_COLL " : "", + status & TX_STS_MANY_DEFER ? "TX_STS_MANY_DEFER " : "", + status & TX_STS_UNDERRUN ? "TX_STS_UNDERRUN" : ""); + + return -1; +} + +void eth_halt(void) +{ + smc911x_reset(); +} + +int eth_rx(void) +{ + u32 *data = (u32 *)NetRxPackets[0]; + u32 pktlen, tmplen; + u32 status; + + if ((RX_FIFO_INF & RX_FIFO_INF_RXSUSED) >> 16) { + status = RX_STATUS_FIFO; + pktlen = (status & RX_STS_PKT_LEN) >> 16; + + RX_CFG = 0; + + tmplen = (pktlen + 2 + 3) / 4; + while (tmplen--) + *data++ = RX_DATA_FIFO; + + if (status & RX_STS_ES) + printf(DRIVERNAME + ": dropped bad packet. Status: 0x%08x\n", + status); + else + NetReceive(NetRxPackets[0], pktlen); + } + + return 0; +} + +#endif /* CONFIG_DRIVER_SMC911X */ diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 431a8d2..9d22aa3 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -1267,6 +1267,35 @@ struct phy_info phy_info_VSC8244 = { }, }; +struct phy_info phy_info_VSC8601 = { + 0x00007042, + "Vitesse VSC8601", + 4, + (struct phy_cmd[]){ /* config */ + /* Override PHY config settings */ + /* Configure some basic stuff */ + {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, +#ifdef CFG_VSC8601_SKEWFIX + {MIIM_VSC8601_EPHY_CON,MIIM_VSC8601_EPHY_CON_INIT_SKEW,NULL}, +#endif + {miim_end,} + }, + (struct phy_cmd[]){ /* startup */ + /* Read the Status (2x to make sure link is right) */ + {MIIM_STATUS, miim_read, NULL}, + /* Auto-negotiate */ + {MIIM_STATUS, miim_read, &mii_parse_sr}, + /* Read the status */ + {MIIM_VSC8244_AUX_CONSTAT, miim_read, + &mii_parse_vsc8244}, + {miim_end,} + }, + (struct phy_cmd[]){ /* shutdown */ + {miim_end,} + }, +}; + + struct phy_info phy_info_dm9161 = { 0x0181b88, "Davicom DM9161E", @@ -1462,6 +1491,7 @@ struct phy_info *phy_info[] = { &phy_info_dm9161, &phy_info_lxt971, &phy_info_VSC8244, + &phy_info_VSC8601, &phy_info_dp83865, &phy_info_rtl8211b, &phy_info_generic, diff --git a/drivers/net/tsec.h b/drivers/net/tsec.h index d4dc15a..cfa7d1a 100644 --- a/drivers/net/tsec.h +++ b/drivers/net/tsec.h @@ -159,6 +159,11 @@ #define MIIM_VSC8244_LED_CON 0x1b #define MIIM_VSC8244_LEDCON_INIT 0xF011 +/* Entry for Vitesse VSC8601 regs starts here (Not complete) */ +/* Vitesse VSC8601 Extended PHY Control Register 1 */ +#define MIIM_VSC8601_EPHY_CON 0x17 +#define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120 + /* 88E1011 PHY Status Register */ #define MIIM_88E1011_PHY_STATUS 0x11 #define MIIM_88E1011_PHYSTAT_SPEED 0xc000 diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index fe45839..ad1b7dd 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -31,6 +31,9 @@ COBJS-y += pci_auto.o COBJS-y += pci_indirect.o COBJS-y += tsi108_pci.o COBJS-y += w83c553f.o +COBJS-$(CONFIG_SH4_PCI) += pci_sh4.o +COBJS-$(CONFIG_SH7751_PCI) +=pci_sh7751.o +COBJS-$(CONFIG_SH7780_PCI) +=pci_sh7780.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/pci/pci_sh4.c b/drivers/pci/pci_sh4.c new file mode 100644 index 0000000..1290c0a --- /dev/null +++ b/drivers/pci/pci_sh4.c @@ -0,0 +1,76 @@ +/* + * SH4 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * u-boot/cpu/sh4/pci-sh4.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/pci.h> +#include <pci.h> + +int pci_sh4_init(struct pci_controller *hose) +{ + hose->first_busno = 0; + hose->region_count = 0; + hose->last_busno = 0xff; + + /* PCI memory space */ + pci_set_region(hose->regions + 0, + CONFIG_PCI_MEM_BUS, + CONFIG_PCI_MEM_PHYS, + CONFIG_PCI_MEM_SIZE, + PCI_REGION_MEM); + hose->region_count++; + + /* PCI IO space */ + pci_set_region(hose->regions + 1, + CONFIG_PCI_IO_BUS, + CONFIG_PCI_IO_PHYS, + CONFIG_PCI_IO_SIZE, + PCI_REGION_IO); + hose->region_count++; + + udelay(1000); + + pci_set_ops(hose, + pci_hose_read_config_byte_via_dword, + pci_hose_read_config_word_via_dword, + pci_sh4_read_config_dword, + pci_hose_write_config_byte_via_dword, + pci_hose_write_config_word_via_dword, + pci_sh4_write_config_dword); + + pci_register_hose(hose); + + udelay(1000); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + hose->last_busno = pci_hose_scan(hose); + return 0; +} diff --git a/drivers/pci/pci_sh7751.c b/drivers/pci/pci_sh7751.c new file mode 100644 index 0000000..a058e1d --- /dev/null +++ b/drivers/pci/pci_sh7751.c @@ -0,0 +1,199 @@ +/* + * SH7751 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <pci.h> + +/* Register addresses and such */ +#define SH7751_BCR1 (vu_long *)0xFF800000 +#define SH7751_BCR2 (vu_short*)0xFF800004 +#define SH7751_WCR1 (vu_long *)0xFF800008 +#define SH7751_WCR2 (vu_long *)0xFF80000C +#define SH7751_WCR3 (vu_long *)0xFF800010 +#define SH7751_MCR (vu_long *)0xFF800014 +#define SH7751_BCR3 (vu_short*)0xFF800050 +#define SH7751_PCICONF0 (vu_long *)0xFE200000 +#define SH7751_PCICONF1 (vu_long *)0xFE200004 +#define SH7751_PCICONF2 (vu_long *)0xFE200008 +#define SH7751_PCICONF3 (vu_long *)0xFE20000C +#define SH7751_PCICONF4 (vu_long *)0xFE200010 +#define SH7751_PCICONF5 (vu_long *)0xFE200014 +#define SH7751_PCICONF6 (vu_long *)0xFE200018 +#define SH7751_PCICR (vu_long *)0xFE200100 +#define SH7751_PCILSR0 (vu_long *)0xFE200104 +#define SH7751_PCILSR1 (vu_long *)0xFE200108 +#define SH7751_PCILAR0 (vu_long *)0xFE20010C +#define SH7751_PCILAR1 (vu_long *)0xFE200110 +#define SH7751_PCIMBR (vu_long *)0xFE2001C4 +#define SH7751_PCIIOBR (vu_long *)0xFE2001C8 +#define SH7751_PCIPINT (vu_long *)0xFE2001CC +#define SH7751_PCIPINTM (vu_long *)0xFE2001D0 +#define SH7751_PCICLKR (vu_long *)0xFE2001D4 +#define SH7751_PCIBCR1 (vu_long *)0xFE2001E0 +#define SH7751_PCIBCR2 (vu_long *)0xFE2001E4 +#define SH7751_PCIWCR1 (vu_long *)0xFE2001E8 +#define SH7751_PCIWCR2 (vu_long *)0xFE2001EC +#define SH7751_PCIWCR3 (vu_long *)0xFE2001F0 +#define SH7751_PCIMCR (vu_long *)0xFE2001F4 +#define SH7751_PCIBCR3 (vu_long *)0xFE2001F8 + +#define BCR1_BREQEN 0x00080000 +#define PCI_SH7751_ID 0x35051054 +#define PCI_SH7751R_ID 0x350E1054 +#define SH7751_PCICONF1_WCC 0x00000080 +#define SH7751_PCICONF1_PER 0x00000040 +#define SH7751_PCICONF1_BUM 0x00000004 +#define SH7751_PCICONF1_MES 0x00000002 +#define SH7751_PCICONF1_CMDS 0x000000C6 +#define SH7751_PCI_HOST_BRIDGE 0x6 +#define SH7751_PCICR_PREFIX 0xa5000000 +#define SH7751_PCICR_PRST 0x00000002 +#define SH7751_PCICR_CFIN 0x00000001 +#define SH7751_PCIPINT_D3 0x00000002 +#define SH7751_PCIPINT_D0 0x00000001 +#define SH7751_PCICLKR_PREFIX 0xa5000000 + +#define SH7751_PCI_MEM_BASE 0xFD000000 +#define SH7751_PCI_MEM_SIZE 0x01000000 +#define SH7751_PCI_IO_BASE 0xFE240000 +#define SH7751_PCI_IO_SIZE 0x00040000 + +#define SH7751_CS3_BASE_ADDR 0x0C000000 +#define SH7751_P2CS3_BASE_ADDR 0xAC000000 + +#define SH7751_PCIPAR (vu_long *)0xFE2001C0 +#define SH7751_PCIPDR (vu_long *)0xFE200220 + +#define p4_in(addr) *(addr) +#define p4_out(data,addr) *(addr) = (data) + +/* Double word */ +int pci_sh4_read_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 * value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR); + *value = p4_in(SH7751_PCIPDR); + + return 0; +} + +int pci_sh4_write_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 * value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR); + p4_out(value, SH7751_PCIPDR); + + return 0; +} + +int pci_sh7751_init(struct pci_controller *hose) +{ + /* Double-check that we're a 7751 or 7751R chip */ + if (p4_in(SH7751_PCICONF0) != PCI_SH7751_ID + && p4_in(SH7751_PCICONF0) != PCI_SH7751R_ID) { + printf("PCI: Unknown PCI host bridge.\n"); + return 1; + } + printf("PCI: SH7751 PCI host bridge found.\n"); + + /* Double-check some BSC config settings */ + /* (Area 3 non-MPX 32-bit, PCI bus pins) */ + if ((p4_in(SH7751_BCR1) & 0x20008) == 0x20000) { + printf("SH7751_BCR1 0x%08X\n", p4_in(SH7751_BCR1)); + return 2; + } + if ((p4_in(SH7751_BCR2) & 0xC0) != 0xC0) { + printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2)); + return 3; + } + if (p4_in(SH7751_BCR2) & 0x01) { + printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2)); + return 4; + } + + /* Force BREQEN in BCR1 to allow PCIC access */ + p4_out((p4_in(SH7751_BCR1) | BCR1_BREQEN), SH7751_BCR1); + + /* Toggle PCI reset pin */ + p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_PRST), SH7751_PCICR); + udelay(32); + p4_out(SH7751_PCICR_PREFIX, SH7751_PCICR); + + /* Set cmd bits: WCC, PER, BUM, MES */ + /* (Addr/Data stepping, Parity enabled, Bus Master, Memory enabled) */ + p4_out(0xfb900047, SH7751_PCICONF1); /* K.Kino */ + + /* Define this host as the host bridge */ + p4_out((SH7751_PCI_HOST_BRIDGE << 24), SH7751_PCICONF2); + + /* Force PCI clock(s) on */ + p4_out(0, SH7751_PCICLKR); + p4_out(0x03, SH7751_PCICLKR); + + /* Clear powerdown IRQs, also mask them (unused) */ + p4_out((SH7751_PCIPINT_D0 | SH7751_PCIPINT_D3), SH7751_PCIPINT); + p4_out(0, SH7751_PCIPINTM); + + p4_out(0xab000001, SH7751_PCICONF4); + + /* Set up target memory mappings (for external DMA access) */ + /* Map both P0 and P2 range to Area 3 RAM for ease of use */ + p4_out((64 - 1) << 20, SH7751_PCILSR0); + p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCILAR0); + p4_out(0, SH7751_PCILSR1); + p4_out(0, SH7751_PCILAR1); + p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCICONF5); + p4_out(0xd0000000, SH7751_PCICONF6); + + /* Map memory window to same address on PCI bus */ + p4_out(SH7751_PCI_MEM_BASE, SH7751_PCIMBR); + + /* Map IO window to same address on PCI bus */ + p4_out(0x2000 & 0xfffc0000, SH7751_PCIIOBR); + + /* set BREQEN */ + p4_out(inl(SH7751_BCR1) | 0x00080000, SH7751_BCR1); + + /* Copy BSC registers into PCI BSC */ + p4_out(inl(SH7751_BCR1), SH7751_PCIBCR1); + p4_out(inl(SH7751_BCR2), SH7751_PCIBCR2); + p4_out(inl(SH7751_BCR3), SH7751_PCIBCR3); + p4_out(inl(SH7751_WCR1), SH7751_PCIWCR1); + p4_out(inl(SH7751_WCR2), SH7751_PCIWCR2); + p4_out(inl(SH7751_WCR3), SH7751_PCIWCR3); + p4_out(inl(SH7751_MCR), SH7751_PCIMCR); + + /* Finally, set central function init complete */ + p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_CFIN), SH7751_PCICR); + + pci_sh4_init(hose); + + return 0; +} diff --git a/drivers/pci/pci_sh7780.c b/drivers/pci/pci_sh7780.c new file mode 100644 index 0000000..d63d67d --- /dev/null +++ b/drivers/pci/pci_sh7780.c @@ -0,0 +1,107 @@ +/* + * SH7780 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <pci.h> + +#define SH7780_VENDOR_ID 0x1912 +#define SH7780_DEVICE_ID 0x0002 +#define SH7780_PCICR_PREFIX 0xA5000000 +#define SH7780_PCICR_PFCS 0x00000800 +#define SH7780_PCICR_FTO 0x00000400 +#define SH7780_PCICR_PFE 0x00000200 +#define SH7780_PCICR_TBS 0x00000100 +#define SH7780_PCICR_ARBM 0x00000040 +#define SH7780_PCICR_IOCS 0x00000004 +#define SH7780_PCICR_PRST 0x00000002 +#define SH7780_PCICR_CFIN 0x00000001 + +#define p4_in(addr) *((vu_long *)addr) +#define p4_out(data,addr) *(vu_long *)(addr) = (data) +#define p4_inw(addr) *((vu_short *)addr) +#define p4_outw(data,addr) *(vu_short *)(addr) = (data) + +int pci_sh4_read_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 *value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR); + *value = p4_in(SH7780_PCIPDR); + + return 0; +} + +int pci_sh4_write_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR); + p4_out(value, SH7780_PCIPDR); + return 0; +} + +int pci_sh7780_init(struct pci_controller *hose) +{ + p4_out(0x01, SH7780_PCIECR); + + if (p4_inw(SH7780_PCIVID) != SH7780_VENDOR_ID + && p4_inw(SH7780_PCIDID) != SH7780_DEVICE_ID){ + printf("PCI: Unknown PCI host bridge.\n"); + return; + } + printf("PCI: SH7780 PCI host bridge found.\n"); + + /* Toggle PCI reset pin */ + p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_PRST), SH7780_PCICR); + udelay(100000); + p4_out(SH7780_PCICR_PREFIX, SH7780_PCICR); + p4_outw(0x0047, SH7780_PCICMD); + + p4_out(0x07F00001, SH7780_PCILSR0); + p4_out(0x08000000, SH7780_PCILAR0); + p4_out(0x00000000, SH7780_PCILSR1); + p4_out(0, SH7780_PCILAR1); + p4_out(0x08000000, SH7780_PCIMBAR0); + p4_out(0x00000000, SH7780_PCIMBAR1); + + p4_out(0xFD000000, SH7780_PCIMBR0); + p4_out(0x00FC0000, SH7780_PCIMBMR0); + + /* if use Operand Cache then enable PCICSCR Soonp bits. */ + p4_out(0x08000000, SH7780_PCICSAR0); + p4_out(0x0000001B, SH7780_PCICSCR0); /* Snoop bit :On */ + + p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_CFIN | SH7780_PCICR_ARBM + | SH7780_PCICR_FTO | SH7780_PCICR_PFCS | SH7780_PCICR_PFE), + SH7780_PCICR); + + pci_sh4_init(hose); + return 0; +} diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c index 70fd23f..522f96d 100644 --- a/drivers/serial/serial_sh.c +++ b/drivers/serial/serial_sh.c @@ -37,39 +37,46 @@ #define SCFCR (vu_short *)(SCIF_BASE + 0x18) #define SCFDR (vu_short *)(SCIF_BASE + 0x1C) #ifdef CONFIG_CPU_SH7720 /* SH7720 specific */ -#define SCFSR (vu_short *)(SCIF_BASE + 0x14) /* SCSSR */ -#define SCFTDR (vu_char *)(SCIF_BASE + 0x20) -#define SCFRDR (vu_char *)(SCIF_BASE + 0x24) +# define SCFSR (vu_short *)(SCIF_BASE + 0x14) /* SCSSR */ +# define SCFTDR (vu_char *)(SCIF_BASE + 0x20) +# define SCFRDR (vu_char *)(SCIF_BASE + 0x24) #else -#define SCFTDR (vu_char *)(SCIF_BASE + 0xC) -#define SCFSR (vu_short *)(SCIF_BASE + 0x10) -#define SCFRDR (vu_char *)(SCIF_BASE + 0x14) +# define SCFTDR (vu_char *)(SCIF_BASE + 0xC) +# define SCFSR (vu_short *)(SCIF_BASE + 0x10) +# define SCFRDR (vu_char *)(SCIF_BASE + 0x14) #endif -#if defined(CONFIG_SH4A) -#define SCRFDR (vu_short *)(SCIF_BASE + 0x20) -#define SCSPTR (vu_short *)(SCIF_BASE + 0x24) -#define SCLSR (vu_short *)(SCIF_BASE + 0x28) -#define SCRER (vu_short *)(SCIF_BASE + 0x2C) -#define LSR_ORER 1 -#elif defined (CONFIG_SH4) -#define SCSPTR (vu_short *)(SCIF_BASE + 0x20) -#define SCLSR (vu_short *)(SCIF_BASE + 0x24) -#define LSR_ORER 1 -#elif defined (CONFIG_SH3) -#ifdef CONFIG_CPU_SH7720 /* SH7720 specific */ -#define SCLSR (vu_short *)(SCIF_BASE + 0x24) -#define LSR_ORER 0x0200 -#else -#define SCLSR SCFSR /* SCSSR */ -#define LSR_ORER 1 -#endif +#if defined(CONFIG_CPU_SH7780) || \ + defined(CONFIG_CPU_SH7785) +# define SCRFDR (vu_short *)(SCIF_BASE + 0x20) +# define SCSPTR (vu_short *)(SCIF_BASE + 0x24) +# define SCLSR (vu_short *)(SCIF_BASE + 0x28) +# define SCRER (vu_short *)(SCIF_BASE + 0x2C) +# define LSR_ORER 1 +# define FIFOLEVEL_MASK 0xFF +#elif defined(CONFIG_CPU_SH7750) || \ + defined(CONFIG_CPU_SH7751) || \ + defined(CONFIG_CPU_SH7722) +# define SCSPTR (vu_short *)(SCIF_BASE + 0x20) +# define SCLSR (vu_short *)(SCIF_BASE + 0x24) +# define LSR_ORER 1 +# define FIFOLEVEL_MASK 0x1F +#elif defined(CONFIG_CPU_SH7720) +# define SCLSR (vu_short *)(SCIF_BASE + 0x24) +# define LSR_ORER 0x0200 +# define FIFOLEVEL_MASK 0x1F +#elif defined(CONFIG_CPU_SH7710) + defined(CONFIG_CPU_SH7712) +# define SCLSR SCFSR /* SCSSR */ +# define LSR_ORER 1 +# define FIFOLEVEL_MASK 0x1F #endif +/* SCBRR register value setting */ #if defined(CONFIG_CPU_SH7720) -#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) +# define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) #else /* Generic SuperH */ -#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) +# define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) #endif #define SCR_RE (1 << 4) @@ -105,14 +112,13 @@ int serial_init (void) return 0; } -static int serial_tx_fifo_level (void) -{ - return (*SCFDR >> 8) & 0x1F; -} - static int serial_rx_fifo_level (void) { - return (*SCFDR >> 0) & 0x1F; +#if defined(CONFIG_SH4A) + return (*SCRFDR >> 0) & FIFOLEVEL_MASK; +#else + return (*SCFDR >> 0) & FIFOLEVEL_MASK; +#endif } void serial_raw_putc (const char c) diff --git a/include/asm-arm/arch-at91cap9/AT91CAP9.h b/include/asm-arm/arch-at91cap9/AT91CAP9.h deleted file mode 100644 index 02ef9a8..0000000 --- a/include/asm-arm/arch-at91cap9/AT91CAP9.h +++ /dev/null @@ -1,518 +0,0 @@ -/* - * (C) Copyright 2008 - * AT91CAP9 definitions - * Author : ATMEL AT91 application group - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef AT91CAP9_H -#define AT91CAP9_H - -typedef volatile unsigned int AT91_REG; - -/* Static Memory Controller */ -typedef struct _AT91S_SMC { - AT91_REG SMC_SETUP0; /* Setup Register for CS 0 */ - AT91_REG SMC_PULSE0; /* Pulse Register for CS 0 */ - AT91_REG SMC_CYCLE0; /* Cycle Register for CS 0 */ - AT91_REG SMC_CTRL0; /* Control Register for CS 0 */ - AT91_REG SMC_SETUP1; /* Setup Register for CS 1 */ - AT91_REG SMC_PULSE1; /* Pulse Register for CS 1 */ - AT91_REG SMC_CYCLE1; /* Cycle Register for CS 1 */ - AT91_REG SMC_CTRL1; /* Control Register for CS 1 */ - AT91_REG SMC_SETUP2; /* Setup Register for CS 2 */ - AT91_REG SMC_PULSE2; /* Pulse Register for CS 2 */ - AT91_REG SMC_CYCLE2; /* Cycle Register for CS 2 */ - AT91_REG SMC_CTRL2; /* Control Register for CS 2 */ - AT91_REG SMC_SETUP3; /* Setup Register for CS 3 */ - AT91_REG SMC_PULSE3; /* Pulse Register for CS 3 */ - AT91_REG SMC_CYCLE3; /* Cycle Register for CS 3 */ - AT91_REG SMC_CTRL3; /* Control Register for CS 3 */ - AT91_REG SMC_SETUP4; /* Setup Register for CS 4 */ - AT91_REG SMC_PULSE4; /* Pulse Register for CS 4 */ - AT91_REG SMC_CYCLE4; /* Cycle Register for CS 4 */ - AT91_REG SMC_CTRL4; /* Control Register for CS 4 */ - AT91_REG SMC_SETUP5; /* Setup Register for CS 5 */ - AT91_REG SMC_PULSE5; /* Pulse Register for CS 5 */ - AT91_REG SMC_CYCLE5; /* Cycle Register for CS 5 */ - AT91_REG SMC_CTRL5; /* Control Register for CS 5 */ - AT91_REG SMC_SETUP6; /* Setup Register for CS 6 */ - AT91_REG SMC_PULSE6; /* Pulse Register for CS 6 */ - AT91_REG SMC_CYCLE6; /* Cycle Register for CS 6 */ - AT91_REG SMC_CTRL6; /* Control Register for CS 6 */ - AT91_REG SMC_SETUP7; /* Setup Register for CS 7 */ - AT91_REG SMC_PULSE7; /* Pulse Register for CS 7 */ - AT91_REG SMC_CYCLE7; /* Cycle Register for CS 7 */ - AT91_REG SMC_CTRL7; /* Control Register for CS 7 */ -} AT91S_SMC, *AT91PS_SMC; - -/* SMC_SETUP : (SMC Offset: 0x0) Setup Register for CS x */ -#define AT91C_SMC_NWESETUP (0x3F << 0) /* NWE Setup Length */ -#define AT91C_SMC_NCSSETUPWR (0x3F << 8) /* NCS Setup Length for WRite */ -#define AT91C_SMC_NRDSETUP (0x3F << 16) /* NRD Setup Length */ -#define AT91C_SMC_NCSSETUPRD (0x3F << 24) /* NCS Setup Length for ReaD */ -/* SMC_PULSE : (SMC Offset: 0x4) Pulse Register for CS x */ -#define AT91C_SMC_NWEPULSE (0x7F << 0) /* NWE Pulse Length */ -#define AT91C_SMC_NCSPULSEWR (0x7F << 8) /* NCS Pulse Length for WRite */ -#define AT91C_SMC_NRDPULSE (0x7F << 16) /* NRD Pulse Length */ -#define AT91C_SMC_NCSPULSERD (0x7F << 24) /* NCS Pulse Length for ReaD */ -/* SMC_CYC : (SMC Offset: 0x8) Cycle Register for CS x */ -#define AT91C_SMC_NWECYCLE (0x1FF << 0) /* Total Write Cycle Length */ -#define AT91C_SMC_NRDCYCLE (0x1FF << 16) /* Total Read Cycle Length */ -/* SMC_CTRL : (SMC Offset: 0xc) Control Register for CS x */ -#define AT91C_SMC_READMODE (0x1 << 0) /* Read Mode */ -#define AT91C_SMC_WRITEMODE (0x1 << 1) /* Write Mode */ -#define AT91C_SMC_NWAITM (0x3 << 5) /* NWAIT Mode */ - /* External NWAIT disabled */ -#define AT91C_SMC_NWAITM_NWAIT_DISABLE (0x0 << 5) - /* External NWAIT enabled in frozen mode */ -#define AT91C_SMC_NWAITM_NWAIT_ENABLE_FROZEN (0x2 << 5) - /* External NWAIT enabled in ready mode */ -#define AT91C_SMC_NWAITM_NWAIT_ENABLE_READY (0x3 << 5) -#define AT91C_SMC_BAT (0x1 << 8) /* Byte Access Type */ - /* - * Write controled by ncs, nbs0, nbs1, nbs2, nbs3. - * Read controled by ncs, nrd, nbs0, nbs1, nbs2, nbs3. - */ -#define AT91C_SMC_BAT_BYTE_SELECT (0x0 << 8) - /* - * Write controled by ncs, nwe0, nwe1, nwe2, nwe3. - * Read controled by ncs and nrd. - */ -#define AT91C_SMC_BAT_BYTE_WRITE (0x1 << 8) -#define AT91C_SMC_DBW (0x3 << 12) /* Data Bus Width */ -#define AT91C_SMC_DBW_WIDTH_EIGTH_BITS (0x0 << 12) -#define AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS (0x1 << 12) -#define AT91C_SMC_DBW_WIDTH_THIRTY_TWO_BITS (0x2 << 12) -#define AT91C_SMC_TDF (0xF << 16) /* Data Float Time */ -#define AT91C_SMC_TDFEN (0x1 << 20) /* TDF Enabled */ -#define AT91C_SMC_PMEN (0x1 << 24) /* Page Mode Enabled */ -#define AT91C_SMC_PS (0x3 << 28) /* Page Size */ -#define AT91C_SMC_PS_SIZE_FOUR_BYTES (0x0 << 28) -#define AT91C_SMC_PS_SIZE_EIGHT_BYTES (0x1 << 28) -#define AT91C_SMC_PS_SIZE_SIXTEEN_BYTES (0x2 << 28) -#define AT91C_SMC_PS_SIZE_THIRTY_TWO_BYTES (0x3 << 28) -/* SMC_SETUP : (SMC Offset: 0x10) Setup Register for CS x */ -/* SMC_PULSE : (SMC Offset: 0x14) Pulse Register for CS x */ -/* SMC_CYC : (SMC Offset: 0x18) Cycle Register for CS x */ -/* SMC_CTRL : (SMC Offset: 0x1c) Control Register for CS x */ -/* SMC_SETUP : (SMC Offset: 0x20) Setup Register for CS x */ -/* SMC_PULSE : (SMC Offset: 0x24) Pulse Register for CS x */ -/* SMC_CYC : (SMC Offset: 0x28) Cycle Register for CS x */ -/* SMC_CTRL : (SMC Offset: 0x2c) Control Register for CS x */ -/* SMC_SETUP : (SMC Offset: 0x30) Setup Register for CS x */ -/* SMC_PULSE : (SMC Offset: 0x34) Pulse Register for CS x */ -/* SMC_CYC : (SMC Offset: 0x38) Cycle Register for CS x */ -/* SMC_CTRL : (SMC Offset: 0x3c) Control Register for CS x */ -/* SMC_SETUP : (SMC Offset: 0x40) Setup Register for CS x */ -/* SMC_PULSE : (SMC Offset: 0x44) Pulse Register for CS x */ -/* SMC_CYC : (SMC Offset: 0x48) Cycle Register for CS x */ -/* SMC_CTRL : (SMC Offset: 0x4c) Control Register for CS x */ -/* SMC_SETUP : (SMC Offset: 0x50) Setup Register for CS x */ -/* SMC_PULSE : (SMC Offset: 0x54) Pulse Register for CS x */ -/* SMC_CYC : (SMC Offset: 0x58) Cycle Register for CS x */ -/* SMC_CTRL : (SMC Offset: 0x5c) Control Register for CS x */ -/* SMC_SETUP : (SMC Offset: 0x60) Setup Register for CS x */ -/* SMC_PULSE : (SMC Offset: 0x64) Pulse Register for CS x */ -/* SMC_CYC : (SMC Offset: 0x68) Cycle Register for CS x */ -/* SMC_CTRL : (SMC Offset: 0x6c) Control Register for CS x */ -/* SMC_SETUP : (SMC Offset: 0x70) Setup Register for CS x */ -/* SMC_PULSE : (SMC Offset: 0x74) Pulse Register for CS x */ -/* SMC_CYC : (SMC Offset: 0x78) Cycle Register for CS x */ -/* SMC_CTRL : (SMC Offset: 0x7c) Control Register for CS x */ - -/* AHB CCFG */ -typedef struct _AT91S_CCFG { - AT91_REG Reserved0[1]; - AT91_REG CCFG_MPBS0; /* MPB Slave 0 */ - AT91_REG CCFG_UDPHS; /* AHB Periphs */ - AT91_REG CCFG_MPBS1; /* MPB Slave 1 */ - AT91_REG CCFG_EBICSA; /* EBI Chip Select Assignement */ - AT91_REG Reserved1[2]; - AT91_REG CCFG_MPBS2; /* MPB Slave 2 */ - AT91_REG CCFG_MPBS3; /* MPB Slave 3 */ - AT91_REG CCFG_BRIDGE; /* APB Bridge */ - AT91_REG Reserved2[49]; - AT91_REG CCFG_MATRIXVERSION;/* Version */ -} AT91S_CCFG, *AT91PS_CCFG; - -/* CCFG_UDPHS : (CCFG Offset: 0x8) UDPHS Configuration */ -#define AT91C_CCFG_UDPHS_UDP_SELECT (0x1 << 31) /* UDPHS or UDP */ -#define AT91C_CCFG_UDPHS_UDP_SELECT_UDPHS (0x0 << 31) -#define AT91C_CCFG_UDPHS_UDP_SELECT_UDP (0x1 << 31) -/* CCFG_EBICSA : (CCFG Offset: 0x10) EBI Chip Select Assignement Register */ -#define AT91C_EBI_CS1A (0x1 << 1) /* CS1 Assignment */ -#define AT91C_EBI_CS1A_SMC (0x0 << 1) -#define AT91C_EBI_CS1A_BCRAMC (0x1 << 1) -#define AT91C_EBI_CS3A (0x1 << 3) /* CS 3 Assignment */ -#define AT91C_EBI_CS3A_SMC (0x0 << 3) -#define AT91C_EBI_CS3A_SM (0x1 << 3) -#define AT91C_EBI_CS4A (0x1 << 4) /* CS4 Assignment */ -#define AT91C_EBI_CS4A_SMC (0x0 << 4) -#define AT91C_EBI_CS4A_CF (0x1 << 4) -#define AT91C_EBI_CS5A (0x1 << 5) /* CS 5 Assignment */ -#define AT91C_EBI_CS5A_SMC (0x0 << 5) -#define AT91C_EBI_CS5A_CF (0x1 << 5) -#define AT91C_EBI_DBPUC (0x1 << 8) /* Data Bus Pull-up */ -#define AT91C_EBI_DDRPUC (0x1 << 9) /* DDDR DQS Pull-up */ -#define AT91C_EBI_SUP (0x1 << 16) /* EBI Supply */ -#define AT91C_EBI_SUP_1V8 (0x0 << 16) -#define AT91C_EBI_SUP_3V3 (0x1 << 16) -#define AT91C_EBI_LP (0x1 << 17) /* EBI Low Power */ -#define AT91C_EBI_LP_LOW_DRIVE (0x0 << 17) -#define AT91C_EBI_LP_STD_DRIVE (0x1 << 17) -#define AT91C_CCFG_DDR_SDR_SELECT (0x1 << 31) /* DDR or SDR */ -#define AT91C_CCFG_DDR_SDR_SELECT_DDR (0x0 << 31) -#define AT91C_CCFG_DDR_SDR_SELECT_SDR (0x1 << 31) -/* CCFG_BRIDGE : (CCFG Offset: 0x24) BRIDGE Configuration */ -#define AT91C_CCFG_AES_TDES_SELECT (0x1 << 31) /* AES or TDES */ -#define AT91C_CCFG_AES_TDES_SELECT_AES (0x0 << 31) -#define AT91C_CCFG_AES_TDES_SELECT_TDES (0x1 << 31) - -/* PIO controller */ -typedef struct _AT91S_PIO { - AT91_REG PIO_PER; /* PIO Enable Register */ - AT91_REG PIO_PDR; /* PIO Disable Register */ - AT91_REG PIO_PSR; /* PIO Status Register */ - AT91_REG Reserved0[1]; - AT91_REG PIO_OER; /* Output Enable Register */ - AT91_REG PIO_ODR; /* Output Disable Register */ - AT91_REG PIO_OSR; /* Output Status Register */ - AT91_REG Reserved1[1]; - AT91_REG PIO_IFER; /* Input Filter Enable Register */ - AT91_REG PIO_IFDR; /* Input Filter Disable Register */ - AT91_REG PIO_IFSR; /* Input Filter Status Register */ - AT91_REG Reserved2[1]; - AT91_REG PIO_SODR; /* Set Output Data Register */ - AT91_REG PIO_CODR; /* Clear Output Data Register */ - AT91_REG PIO_ODSR; /* Output Data Status Register */ - AT91_REG PIO_PDSR; /* Pin Data Status Register */ - AT91_REG PIO_IER; /* Interrupt Enable Register */ - AT91_REG PIO_IDR; /* Interrupt Disable Register */ - AT91_REG PIO_IMR; /* Interrupt Mask Register */ - AT91_REG PIO_ISR; /* Interrupt Status Register */ - AT91_REG PIO_MDER; /* Multi-driver Enable Register */ - AT91_REG PIO_MDDR; /* Multi-driver Disable Register */ - AT91_REG PIO_MDSR; /* Multi-driver Status Register */ - AT91_REG Reserved3[1]; - AT91_REG PIO_PPUDR; /* Pull-up Disable Register */ - AT91_REG PIO_PPUER; /* Pull-up Enable Register */ - AT91_REG PIO_PPUSR; /* Pull-up Status Register */ - AT91_REG Reserved4[1]; - AT91_REG PIO_ASR; /* Select A Register */ - AT91_REG PIO_BSR; /* Select B Register */ - AT91_REG PIO_ABSR; /* AB Select Status Register */ - AT91_REG Reserved5[9]; - AT91_REG PIO_OWER; /* Output Write Enable Register */ - AT91_REG PIO_OWDR; /* Output Write Disable Register */ - AT91_REG PIO_OWSR; /* Output Write Status Register */ -} AT91S_PIO, *AT91PS_PIO; - -/* Power Management Controller */ -typedef struct _AT91S_PMC { - AT91_REG PMC_SCER; /* System Clock Enable Register */ - AT91_REG PMC_SCDR; /* System Clock Disable Register */ - AT91_REG PMC_SCSR; /* System Clock Status Register */ - AT91_REG Reserved0[1]; - AT91_REG PMC_PCER; /* Peripheral Clock Enable Register */ - AT91_REG PMC_PCDR; /* Peripheral Clock Disable Register */ - AT91_REG PMC_PCSR; /* Peripheral Clock Status Register */ - AT91_REG PMC_UCKR; /* UTMI Clock Configuration Register */ - AT91_REG PMC_MOR; /* Main Oscillator Register */ - AT91_REG PMC_MCFR; /* Main Clock Frequency Register */ - AT91_REG PMC_PLLAR; /* PLL A Register */ - AT91_REG PMC_PLLBR; /* PLL B Register */ - AT91_REG PMC_MCKR; /* Master Clock Register */ - AT91_REG Reserved1[3]; - AT91_REG PMC_PCKR[8]; /* Programmable Clock Register */ - AT91_REG PMC_IER; /* Interrupt Enable Register */ - AT91_REG PMC_IDR; /* Interrupt Disable Register */ - AT91_REG PMC_SR; /* Status Register */ - AT91_REG PMC_IMR; /* Interrupt Mask Register */ -} AT91S_PMC, *AT91PS_PMC; - -/* PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register */ -#define AT91C_PMC_PCK (0x1 << 0) /* Processor Clock */ -#define AT91C_PMC_OTG (0x1 << 5) /* USB OTG Clock */ -#define AT91C_PMC_UHP (0x1 << 6) /* USB Host Port Clock */ -#define AT91C_PMC_UDP (0x1 << 7) /* USB Device Port Clock */ -#define AT91C_PMC_PCK0 (0x1 << 8) /* Programmable Clock Output */ -#define AT91C_PMC_PCK1 (0x1 << 9) /* Programmable Clock Output */ -#define AT91C_PMC_PCK2 (0x1 << 10) /* Programmable Clock Output */ -#define AT91C_PMC_PCK3 (0x1 << 11) /* Programmable Clock Output */ -/* PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register */ -/* PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register */ -/* CKGR_UCKR : (PMC Offset: 0x1c) UTMI Clock Configuration Register */ -/* CKGR_MOR : (PMC Offset: 0x20) Main Oscillator Register */ -/* CKGR_MCFR : (PMC Offset: 0x24) Main Clock Frequency Register */ -/* CKGR_PLLAR : (PMC Offset: 0x28) PLL A Register */ -/* CKGR_PLLBR : (PMC Offset: 0x2c) PLL B Register */ -/* PMC_MCKR : (PMC Offset: 0x30) Master Clock Register */ -#define AT91C_PMC_CSS (0x3 << 0) /* Clock Selection */ -#define AT91C_PMC_CSS_SLOW_CLK (0x0 << 0) /* Slow Clk */ -#define AT91C_PMC_CSS_MAIN_CLK (0x1 << 0) /* Main Clk */ -#define AT91C_PMC_CSS_PLLA_CLK (0x2 << 0) /* PLL A Clk */ -#define AT91C_PMC_CSS_PLLB_CLK (0x3 << 0) /* PLL B Clk */ -#define AT91C_PMC_PRES (0x7 << 2) /* Clock Prescaler */ -#define AT91C_PMC_PRES_CLK (0x0 << 2) -#define AT91C_PMC_PRES_CLK_2 (0x1 << 2) -#define AT91C_PMC_PRES_CLK_4 (0x2 << 2) -#define AT91C_PMC_PRES_CLK_8 (0x3 << 2) -#define AT91C_PMC_PRES_CLK_16 (0x4 << 2) -#define AT91C_PMC_PRES_CLK_32 (0x5 << 2) -#define AT91C_PMC_PRES_CLK_64 (0x6 << 2) -#define AT91C_PMC_MDIV (0x3 << 8) /* Master Clock Division */ -#define AT91C_PMC_MDIV_1 (0x0 << 8) -#define AT91C_PMC_MDIV_2 (0x1 << 8) -#define AT91C_PMC_MDIV_4 (0x2 << 8) -/* PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register */ -/* PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register */ -#define AT91C_PMC_MOSCS (0x1 << 0) /* MOSC mask */ -#define AT91C_PMC_LOCKA (0x1 << 1) /* PLL A mask */ -#define AT91C_PMC_LOCKB (0x1 << 2) /* PLL B mask */ -#define AT91C_PMC_MCKRDY (0x1 << 3) /* Master mask */ -#define AT91C_PMC_LOCKU (0x1 << 6) /* PLL UTMI mask */ -#define AT91C_PMC_PCK0RDY (0x1 << 8) /* PCK0_RDY mask */ -#define AT91C_PMC_PCK1RDY (0x1 << 9) /* PCK1_RDY mask */ -#define AT91C_PMC_PCK2RDY (0x1 << 10) /* PCK2_RDY mask */ -#define AT91C_PMC_PCK3RDY (0x1 << 11) /* PCK3_RDY mask */ -/* PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register */ -/* PMC_SR : (PMC Offset: 0x68) PMC Status Register */ -/* PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register */ - -/* Reset controller */ -typedef struct _AT91S_RSTC { - AT91_REG RSTC_RCR; /* Reset Control Register */ - AT91_REG RSTC_RSR; /* Reset Status Register */ - AT91_REG RSTC_RMR; /* Reset Mode Register */ -} AT91S_RSTC, *AT91PS_RSTC; - -/* RSTC_RCR : (RSTC Offset: 0x0) Reset Control Register */ -#define AT91C_RSTC_PROCRST (0x1 << 0) /* Processor Reset */ -#define AT91C_RSTC_ICERST (0x1 << 1) /* ICE Interface Reset */ -#define AT91C_RSTC_PERRST (0x1 << 2) /* Peripheral Reset */ -#define AT91C_RSTC_EXTRST (0x1 << 3) /* External Reset */ -#define AT91C_RSTC_KEY (0xFF << 24) /* Password */ -/* RSTC_RSR : (RSTC Offset: 0x4) Reset Status Register */ -#define AT91C_RSTC_URSTS (0x1 << 0) /* User Reset Status */ -#define AT91C_RSTC_RSTTYP (0x7 << 8) /* Reset Type */ -#define AT91C_RSTC_RSTTYP_GENERAL (0x0 << 8) -#define AT91C_RSTC_RSTTYP_WAKEUP (0x1 << 8) -#define AT91C_RSTC_RSTTYP_WATCHDOG (0x2 << 8) -#define AT91C_RSTC_RSTTYP_SOFTWARE (0x3 << 8) -#define AT91C_RSTC_RSTTYP_USER (0x4 << 8) -#define AT91C_RSTC_NRSTL (0x1 << 16) /* NRST pin level */ -#define AT91C_RSTC_SRCMP (0x1 << 17) /* Software Rst in Progress. */ -/* RSTC_RMR : (RSTC Offset: 0x8) Reset Mode Register */ -#define AT91C_RSTC_URSTEN (0x1 << 0) /* User Reset Enable */ -#define AT91C_RSTC_URSTIEN (0x1 << 4) /* User Reset Int. Enable */ -#define AT91C_RSTC_ERSTL (0xF << 8) /* User Reset Enable */ - -/* Periodic Timer Controller */ -typedef struct _AT91S_PITC { - AT91_REG PITC_PIMR; /* Period Interval Mode Register */ - AT91_REG PITC_PISR; /* Period Interval Status Register */ - AT91_REG PITC_PIVR; /* Period Interval Value Register */ - AT91_REG PITC_PIIR; /* Period Interval Image Register */ -} AT91S_PITC, *AT91PS_PITC; - -/* PITC_PIMR : (PITC Offset: 0x0) Periodic Interval Mode Register */ -#define AT91C_PITC_PIV (0xFFFFF << 0) /* Periodic Interval Value */ -#define AT91C_PITC_PITEN (0x1 << 24) /* PIT Enable */ -#define AT91C_PITC_PITIEN (0x1 << 25) /* PIT Interrupt Enable */ -/* PITC_PISR : (PITC Offset: 0x4) Periodic Interval Status Register */ -#define AT91C_PITC_PITS (0x1 << 0) /* PIT Status */ -/* PITC_PIVR : (PITC Offset: 0x8) Periodic Interval Value Register */ -#define AT91C_PITC_CPIV (0xFFFFF << 0) /* Current Value */ -#define AT91C_PITC_PICNT (0xFFF << 20) /* Periodic Interval Counter */ -/* PITC_PIIR : (PITC Offset: 0xc) Periodic Interval Image Register */ - -/* Serial Paraller Interface */ -typedef struct _AT91S_SPI { - AT91_REG SPI_CR; /* Control Register */ - AT91_REG SPI_MR; /* Mode Register */ - AT91_REG SPI_RDR; /* Receive Data Register */ - AT91_REG SPI_TDR; /* Transmit Data Register */ - AT91_REG SPI_SR; /* Status Register */ - AT91_REG SPI_IER; /* Interrupt Enable Register */ - AT91_REG SPI_IDR; /* Interrupt Disable Register */ - AT91_REG SPI_IMR; /* Interrupt Mask Register */ - AT91_REG Reserved0[4]; - AT91_REG SPI_CSR[4]; /* Chip Select Register */ - AT91_REG Reserved1[48]; - AT91_REG SPI_RPR; /* Receive Pointer Register */ - AT91_REG SPI_RCR; /* Receive Counter Register */ - AT91_REG SPI_TPR; /* Transmit Pointer Register */ - AT91_REG SPI_TCR; /* Transmit Counter Register */ - AT91_REG SPI_RNPR; /* Receive Next Pointer Register */ - AT91_REG SPI_RNCR; /* Receive Next Counter Register */ - AT91_REG SPI_TNPR; /* Transmit Next Pointer Register */ - AT91_REG SPI_TNCR; /* Transmit Next Counter Register */ - AT91_REG SPI_PTCR; /* PDC Transfer Control Register */ - AT91_REG SPI_PTSR; /* PDC Transfer Status Register */ -} AT91S_SPI, *AT91PS_SPI; - -/* SPI_CR : (SPI Offset: 0x0) SPI Control Register */ -#define AT91C_SPI_SPIEN (0x1 << 0) /* SPI Enable */ -#define AT91C_SPI_SPIDIS (0x1 << 1) /* SPI Disable */ -#define AT91C_SPI_SWRST (0x1 << 7) /* SPI Software reset */ -#define AT91C_SPI_LASTXFER (0x1 << 24) /* SPI Last Transfer */ -/* SPI_MR : (SPI Offset: 0x4) SPI Mode Register */ -#define AT91C_SPI_MSTR (0x1 << 0) /* Master/Slave Mode */ -#define AT91C_SPI_PS (0x1 << 1) /* Peripheral Select */ -#define AT91C_SPI_PS_FIXED (0x0 << 1) -#define AT91C_SPI_PS_VARIABLE (0x1 << 1) -#define AT91C_SPI_PCSDEC (0x1 << 2) /* Chip Select Decode */ -#define AT91C_SPI_FDIV (0x1 << 3) /* Clock Selection */ -#define AT91C_SPI_MODFDIS (0x1 << 4) /* Mode Fault Detection */ -#define AT91C_SPI_LLB (0x1 << 7) /* Clock Selection */ -#define AT91C_SPI_PCS (0xF << 16) /* Peripheral Chip Select */ -#define AT91C_SPI_DLYBCS (0xFF << 24) /* Delay Between Chip Selects */ -/* SPI_RDR : (SPI Offset: 0x8) Receive Data Register */ -#define AT91C_SPI_RD (0xFFFF << 0) /* Receive Data */ -#define AT91C_SPI_RPCS (0xF << 16) /* Peripheral CS Status */ -/* SPI_TDR : (SPI Offset: 0xc) Transmit Data Register */ -#define AT91C_SPI_TD (0xFFFF << 0) /* Transmit Data */ -#define AT91C_SPI_TPCS (0xF << 16) /* Peripheral CS Status */ -/* SPI_SR : (SPI Offset: 0x10) Status Register */ -#define AT91C_SPI_RDRF (0x1 << 0) /* Receive Data Register Full */ -#define AT91C_SPI_TDRE (0x1 << 1) /* Trans. Data Register Empty */ -#define AT91C_SPI_MODF (0x1 << 2) /* Mode Fault Error */ -#define AT91C_SPI_OVRES (0x1 << 3) /* Overrun Error Status */ -#define AT91C_SPI_ENDRX (0x1 << 4) /* End of Receiver Transfer */ -#define AT91C_SPI_ENDTX (0x1 << 5) /* End of Receiver Transfer */ -#define AT91C_SPI_RXBUFF (0x1 << 6) /* RXBUFF Interrupt */ -#define AT91C_SPI_TXBUFE (0x1 << 7) /* TXBUFE Interrupt */ -#define AT91C_SPI_NSSR (0x1 << 8) /* NSSR Interrupt */ -#define AT91C_SPI_TXEMPTY (0x1 << 9) /* TXEMPTY Interrupt */ -#define AT91C_SPI_SPIENS (0x1 << 16) /* Enable Status */ -/* SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register */ -/* SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register */ -/* SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register */ -/* SPI_CSR : (SPI Offset: 0x30) Chip Select Register */ -#define AT91C_SPI_CPOL (0x1 << 0) /* Clock Polarity */ -#define AT91C_SPI_NCPHA (0x1 << 1) /* Clock Phase */ -#define AT91C_SPI_CSAAT (0x1 << 3) /* CS Active After Transfer */ -#define AT91C_SPI_BITS (0xF << 4) /* Bits Per Transfer */ -#define AT91C_SPI_BITS_8 (0x0 << 4) /* 8 Bits */ -#define AT91C_SPI_BITS_9 (0x1 << 4) /* 9 Bits */ -#define AT91C_SPI_BITS_10 (0x2 << 4) /* 10 Bits */ -#define AT91C_SPI_BITS_11 (0x3 << 4) /* 11 Bits */ -#define AT91C_SPI_BITS_12 (0x4 << 4) /* 12 Bits */ -#define AT91C_SPI_BITS_13 (0x5 << 4) /* 13 Bits */ -#define AT91C_SPI_BITS_14 (0x6 << 4) /* 14 Bits */ -#define AT91C_SPI_BITS_15 (0x7 << 4) /* 15 Bits */ -#define AT91C_SPI_BITS_16 (0x8 << 4) /* 16 Bits */ -#define AT91C_SPI_SCBR (0xFF << 8) /* Serial Clock Baud Rate */ -#define AT91C_SPI_DLYBS (0xFF << 16) /* Delay Before SPCK */ -#define AT91C_SPI_DLYBCT (0xFF << 24) /* Delay Between Transfers */ -/* SPI_PTCR : PDC Transfer Control Register */ -#define AT91C_PDC_RXTEN (0x1 << 0) /* Receiver Transfer Enable */ -#define AT91C_PDC_RXTDIS (0x1 << 1) /* Receiver Transfer Disable */ -#define AT91C_PDC_TXTEN (0x1 << 8) /* Transm. Transfer Enable */ -#define AT91C_PDC_TXTDIS (0x1 << 9) /* Transm. Transfer Disable */ - -/* PIO definitions */ -#define AT91C_PIO_PA0 (1 << 0) /* Pin Controlled by PA0 */ -#define AT91C_PA0_SPI0_MISO AT91C_PIO_PA0 -#define AT91C_PIO_PA1 (1 << 1) /* Pin Controlled by PA1 */ -#define AT91C_PA1_SPI0_MOSI AT91C_PIO_PA1 -#define AT91C_PIO_PA2 (1 << 2) /* Pin Controlled by PA2 */ -#define AT91C_PA2_SPI0_SPCK AT91C_PIO_PA2 -#define AT91C_PIO_PA3 (1 << 3) /* Pin Controlled by PA3 */ -#define AT91C_PA3_SPI0_NPCS1 AT91C_PIO_PA3 -#define AT91C_PIO_PA4 (1 << 4) /* Pin Controlled by PA4 */ -#define AT91C_PA4_SPI0_NPCS2A AT91C_PIO_PA4 -#define AT91C_PIO_PA5 (1 << 5) /* Pin Controlled by PA5 */ -#define AT91C_PA5_SPI0_NPCS0 AT91C_PIO_PA5 -#define AT91C_PIO_PA10 (1 << 10) /* Pin Controlled by PA10 */ -#define AT91C_PIO_PA11 (1 << 11) /* Pin Controlled by PA11 */ -#define AT91C_PIO_PA22 (1 << 22) /* Pin Controlled by PA22 */ -#define AT91C_PA22_TXD0 AT91C_PIO_PA22 -#define AT91C_PIO_PA23 (1 << 23) /* Pin Controlled by PA23 */ -#define AT91C_PA23_RXD0 AT91C_PIO_PA23 -#define AT91C_PIO_PA28 (1 << 28) /* Pin Controlled by PA28 */ -#define AT91C_PA28_SPI0_NPCS3A AT91C_PIO_PA28 -#define AT91C_PIO_PB21 (1 << 21) /* Pin Controlled by PB21 */ -#define AT91C_PB21_E_TXCK AT91C_PIO_PB21 -#define AT91C_PIO_PB22 (1 << 22) /* Pin Controlled by PB22 */ -#define AT91C_PB22_E_RXDV AT91C_PIO_PB22 -#define AT91C_PIO_PB23 (1 << 23) /* Pin Controlled by PB23 */ -#define AT91C_PB23_E_TX0 AT91C_PIO_PB23 -#define AT91C_PIO_PB24 (1 << 24) /* Pin Controlled by PB24 */ -#define AT91C_PB24_E_TX1 AT91C_PIO_PB24 -#define AT91C_PIO_PB25 (1 << 25) /* Pin Controlled by PB25 */ -#define AT91C_PB25_E_RX0 AT91C_PIO_PB25 -#define AT91C_PIO_PB26 (1 << 26) /* Pin Controlled by PB26 */ -#define AT91C_PB26_E_RX1 AT91C_PIO_PB26 -#define AT91C_PIO_PB27 (1 << 27) /* Pin Controlled by PB27 */ -#define AT91C_PB27_E_RXER AT91C_PIO_PB27 -#define AT91C_PIO_PB28 (1 << 28) /* Pin Controlled by PB28 */ -#define AT91C_PB28_E_TXEN AT91C_PIO_PB28 -#define AT91C_PIO_PB29 (1 << 29) /* Pin Controlled by PB29 */ -#define AT91C_PB29_E_MDC AT91C_PIO_PB29 -#define AT91C_PIO_PB30 (1 << 30) /* Pin Controlled by PB30 */ -#define AT91C_PB30_E_MDIO AT91C_PIO_PB30 -#define AT91C_PIO_PB31 (1 << 31) /* Pin Controlled by PB31 */ -#define AT91C_PIO_PC29 (1 << 29) /* Pin Controlled by PC29 */ -#define AT91C_PIO_PC30 (1 << 30) /* Pin Controlled by PC30 */ -#define AT91C_PC30_DRXD AT91C_PIO_PC30 -#define AT91C_PIO_PC31 (1 << 31) /* Pin Controlled by PC31 */ -#define AT91C_PC31_DTXD AT91C_PIO_PC31 -#define AT91C_PIO_PD0 (1 << 0) /* Pin Controlled by PD0 */ -#define AT91C_PD0_TXD1 AT91C_PIO_PD0 -#define AT91C_PD0_SPI0_NPCS2D AT91C_PIO_PD0 -#define AT91C_PIO_PD1 (1 << 1) /* Pin Controlled by PD1 */ -#define AT91C_PD1_RXD1 AT91C_PIO_PD1 -#define AT91C_PD1_SPI0_NPCS3D AT91C_PIO_PD1 -#define AT91C_PIO_PD2 (1 << 2) /* Pin Controlled by PD2 */ -#define AT91C_PD2_TXD2 AT91C_PIO_PD2 -#define AT91C_PIO_PD3 (1 << 3) /* Pin Controlled by PD3 */ -#define AT91C_PD3_RXD2 AT91C_PIO_PD3 -#define AT91C_PIO_PD15 (1 << 15) /* Pin Controlled by PD15 */ - -/* Peripheral ID */ -#define AT91C_ID_SYS 1 /* System Controller */ -#define AT91C_ID_PIOABCD 2 /* Parallel IO Controller A, B, C, D */ -#define AT91C_ID_US0 8 /* USART 0 */ -#define AT91C_ID_US1 9 /* USART 1 */ -#define AT91C_ID_US2 10 /* USART 2 */ -#define AT91C_ID_SPI0 15 /* Serial Peripheral Interface 0 */ -#define AT91C_ID_EMAC 22 /* Ethernet Mac */ -#define AT91C_ID_UHP 29 /* USB Host Port */ - -/* Base addresses */ -#define AT91C_BASE_SMC ((AT91PS_SMC) 0xFFFFE800) /* SMC */ -#define AT91C_BASE_CCFG ((AT91PS_CCFG) 0xFFFFEB10) /* CCFG */ -#define AT91C_BASE_DBGU ((unsigned long)0xFFFFEE00) /* DBGU */ -#define AT91C_BASE_PIOA ((AT91PS_PIO) 0xFFFFF200) /* PIOA */ -#define AT91C_BASE_PIOB ((AT91PS_PIO) 0xFFFFF400) /* PIOB */ -#define AT91C_BASE_PIOC ((AT91PS_PIO) 0xFFFFF600) /* PIOC */ -#define AT91C_BASE_PIOD ((AT91PS_PIO) 0xFFFFF800) /* PIOD */ -#define AT91C_BASE_PMC ((AT91PS_PMC) 0xFFFFFC00) /* PMC */ -#define AT91C_BASE_RSTC ((AT91PS_RSTC) 0xFFFFFD00) /* RSTC */ -#define AT91C_BASE_PITC ((AT91PS_PITC) 0xFFFFFD30) /* PITC */ -#define AT91C_BASE_US0 ((unsigned long)0xFFF8C000) /* US0 */ -#define AT91C_BASE_US1 ((unsigned long)0xFFF90000) /* US1 */ -#define AT91C_BASE_US2 ((unsigned long)0xFFF94000) /* US2 */ -#define AT91C_BASE_SPI0 ((AT91PS_SPI) 0xFFFA4000) /* SPI0 */ -#define AT91C_BASE_MACB ((unsigned long)0xFFFBC000) /* MACB */ - -#endif diff --git a/include/asm-arm/arch-at91cap9/hardware.h b/include/asm-arm/arch-at91cap9/hardware.h deleted file mode 100644 index ec0a671..0000000 --- a/include/asm-arm/arch-at91cap9/hardware.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2007 - * Stelian Pop <stelian.pop <at> leadtechdesign.com> - * Lead Tech Design <www.leadtechdesign.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <asm/sizes.h> - -#include <asm/arch/AT91CAP9.h> - -/* - * container_of - cast a member of a structure out to the containing structure - * - * @ptr: the pointer to the member. - * @type: the type of the container struct this is embedded in. - * @member: the name of the member within the struct. - */ -#define container_of(ptr, type, member) ({ \ - const typeof(((type *)0)->member) *__mptr = (ptr); \ - (type *)((char *)__mptr - offsetof(type, member)); }) - -#endif diff --git a/include/asm-arm/arch-at91sam9/at91_pio.h b/include/asm-arm/arch-at91sam9/at91_pio.h new file mode 100644 index 0000000..84c3866 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91_pio.h @@ -0,0 +1,49 @@ +/* + * include/asm-arm/arch-at91/at91_pio.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Parallel I/O Controller (PIO) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_PIO_H +#define AT91_PIO_H + +#define PIO_PER 0x00 /* Enable Register */ +#define PIO_PDR 0x04 /* Disable Register */ +#define PIO_PSR 0x08 /* Status Register */ +#define PIO_OER 0x10 /* Output Enable Register */ +#define PIO_ODR 0x14 /* Output Disable Register */ +#define PIO_OSR 0x18 /* Output Status Register */ +#define PIO_IFER 0x20 /* Glitch Input Filter Enable */ +#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */ +#define PIO_IFSR 0x28 /* Glitch Input Filter Status */ +#define PIO_SODR 0x30 /* Set Output Data Register */ +#define PIO_CODR 0x34 /* Clear Output Data Register */ +#define PIO_ODSR 0x38 /* Output Data Status Register */ +#define PIO_PDSR 0x3c /* Pin Data Status Register */ +#define PIO_IER 0x40 /* Interrupt Enable Register */ +#define PIO_IDR 0x44 /* Interrupt Disable Register */ +#define PIO_IMR 0x48 /* Interrupt Mask Register */ +#define PIO_ISR 0x4c /* Interrupt Status Register */ +#define PIO_MDER 0x50 /* Multi-driver Enable Register */ +#define PIO_MDDR 0x54 /* Multi-driver Disable Register */ +#define PIO_MDSR 0x58 /* Multi-driver Status Register */ +#define PIO_PUDR 0x60 /* Pull-up Disable Register */ +#define PIO_PUER 0x64 /* Pull-up Enable Register */ +#define PIO_PUSR 0x68 /* Pull-up Status Register */ +#define PIO_ASR 0x70 /* Peripheral A Select Register */ +#define PIO_BSR 0x74 /* Peripheral B Select Register */ +#define PIO_ABSR 0x78 /* AB Status Register */ +#define PIO_OWER 0xa0 /* Output Write Enable Register */ +#define PIO_OWDR 0xa4 /* Output Write Disable Register */ +#define PIO_OWSR 0xa8 /* Output Write Status Register */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91_pit.h b/include/asm-arm/arch-at91sam9/at91_pit.h new file mode 100644 index 0000000..5026325 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91_pit.h @@ -0,0 +1,29 @@ +/* + * include/asm-arm/arch-at91/at91_pit.h + * + * Periodic Interval Timer (PIT) - System peripherals regsters. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_PIT_H +#define AT91_PIT_H + +#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */ +#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ +#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ +#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ + +#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */ +#define AT91_PIT_PITS (1 << 0) /* Timer Status */ + +#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */ +#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */ +#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ +#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91_pmc.h b/include/asm-arm/arch-at91sam9/at91_pmc.h new file mode 100644 index 0000000..52cd8e5 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91_pmc.h @@ -0,0 +1,99 @@ +/* + * include/asm-arm/arch-at91/at91_pmc.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Power Management Controller (PMC) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_PMC_H +#define AT91_PMC_H + +#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */ +#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */ + +#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */ +#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ +#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ +#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ +#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ +#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ +#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ +#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ +#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ +#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ + +#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */ +#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ +#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ + +#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */ + +#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ +#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ +#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */ +#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ + +#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ +#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ +#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ + +#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */ +#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */ +#define AT91_PMC_DIV (0xff << 0) /* Divider */ +#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ +#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ +#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ +#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ +#define AT91_PMC_USBDIV_1 (0 << 28) +#define AT91_PMC_USBDIV_2 (1 << 28) +#define AT91_PMC_USBDIV_4 (2 << 28) +#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ + +#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */ +#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ +#define AT91_PMC_CSS_SLOW (0 << 0) +#define AT91_PMC_CSS_MAIN (1 << 0) +#define AT91_PMC_CSS_PLLA (2 << 0) +#define AT91_PMC_CSS_PLLB (3 << 0) +#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ +#define AT91_PMC_PRES_1 (0 << 2) +#define AT91_PMC_PRES_2 (1 << 2) +#define AT91_PMC_PRES_4 (2 << 2) +#define AT91_PMC_PRES_8 (3 << 2) +#define AT91_PMC_PRES_16 (4 << 2) +#define AT91_PMC_PRES_32 (5 << 2) +#define AT91_PMC_PRES_64 (6 << 2) +#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ +#define AT91_PMC_MDIV_1 (0 << 8) +#define AT91_PMC_MDIV_2 (1 << 8) +#define AT91_PMC_MDIV_3 (2 << 8) +#define AT91_PMC_MDIV_4 (3 << 8) + +#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ + +#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ +#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ +#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */ +#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ +#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ +#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ +#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ +#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91_rstc.h b/include/asm-arm/arch-at91sam9/at91_rstc.h new file mode 100644 index 0000000..fb8d161 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91_rstc.h @@ -0,0 +1,38 @@ +/* + * include/asm-arm/arch-at91/at91_rstc.h + * + * Reset Controller (RSTC) - System peripherals regsters. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_RSTC_H +#define AT91_RSTC_H + +#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */ +#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ +#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ +#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ +#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ + +#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */ +#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ +#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */ +#define AT91_RSTC_RSTTYP_GENERAL (0 << 8) +#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8) +#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8) +#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8) +#define AT91_RSTC_RSTTYP_USER (4 << 8) +#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */ +#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */ + +#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */ +#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */ +#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */ +#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91_spi.h b/include/asm-arm/arch-at91sam9/at91_spi.h new file mode 100644 index 0000000..aaad926 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91_spi.h @@ -0,0 +1,105 @@ +/* + * include/asm-arm/arch-at91/at91_spi.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Serial Peripheral Interface (SPI) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_SPI_H +#define AT91_SPI_H + +#define AT91_SPI_CR 0x00 /* Control Register */ +#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */ +#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */ +#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */ +#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ + +#define AT91_SPI_MR 0x04 /* Mode Register */ +#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */ +#define AT91_SPI_PS (1 << 1) /* Peripheral Select */ +#define AT91_SPI_PS_FIXED (0 << 1) +#define AT91_SPI_PS_VARIABLE (1 << 1) +#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */ +#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */ +#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */ +#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */ +#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ +#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */ + +#define AT91_SPI_RDR 0x08 /* Receive Data Register */ +#define AT91_SPI_RD (0xffff << 0) /* Receive Data */ +#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ + +#define AT91_SPI_TDR 0x0c /* Transmit Data Register */ +#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */ +#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ +#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ + +#define AT91_SPI_SR 0x10 /* Status Register */ +#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */ +#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */ +#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */ +#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */ +#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */ +#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */ +#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */ +#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */ +#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */ +#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */ +#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */ + +#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */ +#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */ +#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */ + +#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */ +#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */ +#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */ +#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */ +#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */ +#define AT91_SPI_BITS_8 (0 << 4) +#define AT91_SPI_BITS_9 (1 << 4) +#define AT91_SPI_BITS_10 (2 << 4) +#define AT91_SPI_BITS_11 (3 << 4) +#define AT91_SPI_BITS_12 (4 << 4) +#define AT91_SPI_BITS_13 (5 << 4) +#define AT91_SPI_BITS_14 (6 << 4) +#define AT91_SPI_BITS_15 (7 << 4) +#define AT91_SPI_BITS_16 (8 << 4) +#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */ +#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */ +#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */ + +#define AT91_SPI_RPR 0x0100 /* Receive Pointer Register */ + +#define AT91_SPI_RCR 0x0104 /* Receive Counter Register */ + +#define AT91_SPI_TPR 0x0108 /* Transmit Pointer Register */ + +#define AT91_SPI_TCR 0x010c /* Transmit Counter Register */ + +#define AT91_SPI_RNPR 0x0110 /* Receive Next Pointer Register */ + +#define AT91_SPI_RNCR 0x0114 /* Receive Next Counter Register */ + +#define AT91_SPI_TNPR 0x0118 /* Transmit Next Pointer Register */ + +#define AT91_SPI_TNCR 0x011c /* Transmit Next Counter Register */ + +#define AT91_SPI_PTCR 0x0120 /* PDC Transfer Control Register */ +#define AT91_SPI_RXTEN (0x1 << 0) /* Receiver Transfer Enable */ +#define AT91_SPI_RXTDIS (0x1 << 1) /* Receiver Transfer Disable */ +#define AT91_SPI_TXTEN (0x1 << 8) /* Transmitter Transfer Enable */ +#define AT91_SPI_TXTDIS (0x1 << 9) /* Transmitter Transfer Disable */ + +#define AT91_SPI_PTSR 0x0124 /* PDC Transfer Status Register */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91cap9.h b/include/asm-arm/arch-at91sam9/at91cap9.h new file mode 100644 index 0000000..e16909c --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91cap9.h @@ -0,0 +1,125 @@ +/* + * include/asm-arm/arch-at91/at91cap9.h + * + * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> + * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> + * Copyright (C) 2007 Atmel Corporation. + * + * Common definitions. + * Based on AT91CAP9 datasheet revision B (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91CAP9_H +#define AT91CAP9_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ +#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ +#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ +#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */ +#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */ +#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */ +#define AT91CAP9_ID_US0 8 /* USART 0 */ +#define AT91CAP9_ID_US1 9 /* USART 1 */ +#define AT91CAP9_ID_US2 10 /* USART 2 */ +#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */ +#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */ +#define AT91CAP9_ID_CAN 13 /* CAN */ +#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */ +#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */ +#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */ +#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */ +#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */ +#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */ +#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */ +#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */ +#define AT91CAP9_ID_EMAC 22 /* Ethernet */ +#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */ +#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */ +#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */ +#define AT91CAP9_ID_LCDC 26 /* LCD Controller */ +#define AT91CAP9_ID_DMA 27 /* DMA Controller */ +#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */ +#define AT91CAP9_ID_UHP 29 /* USB Host Port */ +#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ + +/* + * User Peripheral physical base addresses. + */ +#define AT91CAP9_BASE_UDPHS 0xfff78000 +#define AT91CAP9_BASE_TCB0 0xfff7c000 +#define AT91CAP9_BASE_TC0 0xfff7c000 +#define AT91CAP9_BASE_TC1 0xfff7c040 +#define AT91CAP9_BASE_TC2 0xfff7c080 +#define AT91CAP9_BASE_MCI0 0xfff80000 +#define AT91CAP9_BASE_MCI1 0xfff84000 +#define AT91CAP9_BASE_TWI 0xfff88000 +#define AT91CAP9_BASE_US0 0xfff8c000 +#define AT91CAP9_BASE_US1 0xfff90000 +#define AT91CAP9_BASE_US2 0xfff94000 +#define AT91CAP9_BASE_SSC0 0xfff98000 +#define AT91CAP9_BASE_SSC1 0xfff9c000 +#define AT91CAP9_BASE_AC97C 0xfffa0000 +#define AT91CAP9_BASE_SPI0 0xfffa4000 +#define AT91CAP9_BASE_SPI1 0xfffa8000 +#define AT91CAP9_BASE_CAN 0xfffac000 +#define AT91CAP9_BASE_PWMC 0xfffb8000 +#define AT91CAP9_BASE_EMAC 0xfffbc000 +#define AT91CAP9_BASE_ADC 0xfffc0000 +#define AT91CAP9_BASE_ISI 0xfffc4000 +#define AT91_BASE_SYS 0xffffe200 + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_ECC (0xffffe200 - AT91_BASE_SYS) +#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS) +#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS) +#define AT91_SMC (0xffffe800 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) +#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS) +#define AT91_DMA (0xffffec00 - AT91_BASE_SYS) +#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) + +#define AT91_USART0 AT91CAP9_BASE_US0 +#define AT91_USART1 AT91CAP9_BASE_US1 +#define AT91_USART2 AT91CAP9_BASE_US2 + +/* + * Internal Memory. + */ +#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */ +#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */ + +#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */ + +#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */ +#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */ +#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ + +#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91cap9_matrix.h b/include/asm-arm/arch-at91sam9/at91cap9_matrix.h new file mode 100644 index 0000000..a641686 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91cap9_matrix.h @@ -0,0 +1,132 @@ +/* + * include/asm-arm/arch-at91/at91cap9_matrix.h + * + * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> + * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> + * Copyright (C) 2006 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91CAP9 datasheet revision B (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91CAP9_MATRIX_H +#define AT91CAP9_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ +#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ +#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ +#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ +#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ +#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ +#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ +#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */ +#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ +#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ +#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ +#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ +#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ +#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ +#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ +#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */ +#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */ +#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */ +#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ +#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ +#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ +#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ +#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ +#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ +#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) +#define AT91_MATRIX_RCB6 (1 << 6) +#define AT91_MATRIX_RCB7 (1 << 7) +#define AT91_MATRIX_RCB8 (1 << 8) +#define AT91_MATRIX_RCB9 (1 << 9) +#define AT91_MATRIX_RCB10 (1 << 10) +#define AT91_MATRIX_RCB11 (1 << 11) + +#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */ +#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */ + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1) +#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) +#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) +#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */ +#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) + +#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */ +#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */ +#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91sam9260.h b/include/asm-arm/arch-at91sam9/at91sam9260.h new file mode 100644 index 0000000..1bf4598 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91sam9260.h @@ -0,0 +1,124 @@ +/* + * include/asm-arm/arch-at91/at91sam9260.h + * + * (C) 2006 Andrew Victor + * + * Common definitions. + * Based on AT91SAM9260 datasheet revision A (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9260_H +#define AT91SAM9260_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */ +#define AT91SAM9260_ID_ADC 5 /* Analog-to-Digital Converter */ +#define AT91SAM9260_ID_US0 6 /* USART 0 */ +#define AT91SAM9260_ID_US1 7 /* USART 1 */ +#define AT91SAM9260_ID_US2 8 /* USART 2 */ +#define AT91SAM9260_ID_MCI 9 /* Multimedia Card Interface */ +#define AT91SAM9260_ID_UDP 10 /* USB Device Port */ +#define AT91SAM9260_ID_TWI 11 /* Two-Wire Interface */ +#define AT91SAM9260_ID_SPI0 12 /* Serial Peripheral Interface 0 */ +#define AT91SAM9260_ID_SPI1 13 /* Serial Peripheral Interface 1 */ +#define AT91SAM9260_ID_SSC 14 /* Serial Synchronous Controller */ +#define AT91SAM9260_ID_TC0 17 /* Timer Counter 0 */ +#define AT91SAM9260_ID_TC1 18 /* Timer Counter 1 */ +#define AT91SAM9260_ID_TC2 19 /* Timer Counter 2 */ +#define AT91SAM9260_ID_UHP 20 /* USB Host port */ +#define AT91SAM9260_ID_EMAC 21 /* Ethernet */ +#define AT91SAM9260_ID_ISI 22 /* Image Sensor Interface */ +#define AT91SAM9260_ID_US3 23 /* USART 3 */ +#define AT91SAM9260_ID_US4 24 /* USART 4 */ +#define AT91SAM9260_ID_US5 25 /* USART 5 */ +#define AT91SAM9260_ID_TC3 26 /* Timer Counter 3 */ +#define AT91SAM9260_ID_TC4 27 /* Timer Counter 4 */ +#define AT91SAM9260_ID_TC5 28 /* Timer Counter 5 */ +#define AT91SAM9260_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91SAM9260_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ +#define AT91SAM9260_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9260_BASE_TCB0 0xfffa0000 +#define AT91SAM9260_BASE_TC0 0xfffa0000 +#define AT91SAM9260_BASE_TC1 0xfffa0040 +#define AT91SAM9260_BASE_TC2 0xfffa0080 +#define AT91SAM9260_BASE_UDP 0xfffa4000 +#define AT91SAM9260_BASE_MCI 0xfffa8000 +#define AT91SAM9260_BASE_TWI 0xfffac000 +#define AT91SAM9260_BASE_US0 0xfffb0000 +#define AT91SAM9260_BASE_US1 0xfffb4000 +#define AT91SAM9260_BASE_US2 0xfffb8000 +#define AT91SAM9260_BASE_SSC 0xfffbc000 +#define AT91SAM9260_BASE_ISI 0xfffc0000 +#define AT91SAM9260_BASE_EMAC 0xfffc4000 +#define AT91SAM9260_BASE_SPI0 0xfffc8000 +#define AT91SAM9260_BASE_SPI1 0xfffcc000 +#define AT91SAM9260_BASE_US3 0xfffd0000 +#define AT91SAM9260_BASE_US4 0xfffd4000 +#define AT91SAM9260_BASE_US5 0xfffd8000 +#define AT91SAM9260_BASE_TCB1 0xfffdc000 +#define AT91SAM9260_BASE_TC3 0xfffdc000 +#define AT91SAM9260_BASE_TC4 0xfffdc040 +#define AT91SAM9260_BASE_TC5 0xfffdc080 +#define AT91SAM9260_BASE_ADC 0xfffe0000 +#define AT91_BASE_SYS 0xffffe800 + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_ECC (0xffffe800 - AT91_BASE_SYS) +#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) +#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) + +#define AT91_USART0 AT91SAM9260_BASE_US0 +#define AT91_USART1 AT91SAM9260_BASE_US1 +#define AT91_USART2 AT91SAM9260_BASE_US2 +#define AT91_USART3 AT91SAM9260_BASE_US3 +#define AT91_USART4 AT91SAM9260_BASE_US4 +#define AT91_USART5 AT91SAM9260_BASE_US5 + +/* + * Internal Memory. + */ +#define AT91SAM9260_ROM_BASE 0x00100000 /* Internal ROM base address */ +#define AT91SAM9260_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ + +#define AT91SAM9260_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */ +#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */ +#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ +#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */ + +#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */ + +#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */ +#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91sam9260_matrix.h b/include/asm-arm/arch-at91sam9/at91sam9260_matrix.h new file mode 100644 index 0000000..a8e9fec --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91sam9260_matrix.h @@ -0,0 +1,78 @@ +/* + * include/asm-arm/arch-at91/at91sam9260_matrix.h + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9260 datasheet revision B. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9260_MATRIX_H +#define AT91SAM9260_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ +#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_CS1A_SMC (0 << 1) +#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_CS3A_SMC (0 << 3) +#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_CS4A_SMC (0 << 4) +#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_CS5A_SMC (0 << 5) +#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91sam926x_mc.h b/include/asm-arm/arch-at91sam9/at91sam926x_mc.h new file mode 100644 index 0000000..041138f --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91sam926x_mc.h @@ -0,0 +1,140 @@ +/* + * include/asm-arm/arch-at91/at91sam926x_mc.h + * + * Memory Controllers (SMC, SDRAMC) - System peripherals registers. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM926x_MC_H +#define AT91SAM926x_MC_H + +/* SDRAM Controller (SDRAMC) registers */ +#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ +#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ +#define AT91_SDRAMC_MODE_NORMAL 0 +#define AT91_SDRAMC_MODE_NOP 1 +#define AT91_SDRAMC_MODE_PRECHARGE 2 +#define AT91_SDRAMC_MODE_LMR 3 +#define AT91_SDRAMC_MODE_REFRESH 4 +#define AT91_SDRAMC_MODE_EXT_LMR 5 +#define AT91_SDRAMC_MODE_DEEP 6 + +#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */ +#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ + +#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */ +#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ +#define AT91_SDRAMC_NC_8 (0 << 0) +#define AT91_SDRAMC_NC_9 (1 << 0) +#define AT91_SDRAMC_NC_10 (2 << 0) +#define AT91_SDRAMC_NC_11 (3 << 0) +#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_SDRAMC_NR_11 (0 << 2) +#define AT91_SDRAMC_NR_12 (1 << 2) +#define AT91_SDRAMC_NR_13 (2 << 2) +#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ +#define AT91_SDRAMC_NB_2 (0 << 4) +#define AT91_SDRAMC_NB_4 (1 << 4) +#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ +#define AT91_SDRAMC_CAS_1 (1 << 5) +#define AT91_SDRAMC_CAS_2 (2 << 5) +#define AT91_SDRAMC_CAS_3 (3 << 5) +#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */ +#define AT91_SDRAMC_DBW_32 (0 << 7) +#define AT91_SDRAMC_DBW_16 (1 << 7) +#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */ +#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */ +#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */ +#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */ +#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ +#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ + +#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */ +#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ +#define AT91_SDRAMC_LPCB_DISABLE 0 +#define AT91_SDRAMC_LPCB_SELF_REFRESH 1 +#define AT91_SDRAMC_LPCB_POWER_DOWN 2 +#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 +#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ +#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ +#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */ +#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ +#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) +#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) +#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) + +#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */ +#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */ +#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */ +#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */ +#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ + +#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */ +#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ +#define AT91_SDRAMC_MD_SDRAM 0 +#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 + +/* Static Memory Controller (SMC) registers */ +#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ +#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ +#define AT91_SMC_NWESETUP_(x) ((x) << 0) +#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ +#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) +#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ +#define AT91_SMC_NRDSETUP_(x) ((x) << 16) +#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ +#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) + +#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ +#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ +#define AT91_SMC_NWEPULSE_(x) ((x) << 0) +#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ +#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) +#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ +#define AT91_SMC_NRDPULSE_(x) ((x) << 16) +#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ +#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) + +#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ +#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ +#define AT91_SMC_NWECYCLE_(x) ((x) << 0) +#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ +#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) + +#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ +#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ +#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ +#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ +#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) +#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) +#define AT91_SMC_EXNWMODE_READY (3 << 4) +#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ +#define AT91_SMC_BAT_SELECT (0 << 8) +#define AT91_SMC_BAT_WRITE (1 << 8) +#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ +#define AT91_SMC_DBW_8 (0 << 12) +#define AT91_SMC_DBW_16 (1 << 12) +#define AT91_SMC_DBW_32 (2 << 12) +#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ +#define AT91_SMC_TDF_(x) ((x) << 16) +#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ +#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ +#define AT91_SMC_PS (3 << 28) /* Page Size */ +#define AT91_SMC_PS_4 (0 << 28) +#define AT91_SMC_PS_8 (1 << 28) +#define AT91_SMC_PS_16 (2 << 28) +#define AT91_SMC_PS_32 (3 << 28) + +#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ +#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ +#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ +#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ +#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ +#endif + +#endif diff --git a/include/asm-arm/arch-at91cap9/clk.h b/include/asm-arm/arch-at91sam9/clk.h index ca65a2a..86da9a6 100644 --- a/include/asm-arm/arch-at91cap9/clk.h +++ b/include/asm-arm/arch-at91sam9/clk.h @@ -28,12 +28,12 @@ static inline unsigned long get_macb_pclk_rate(unsigned int dev_id) { - return AT91C_MASTER_CLOCK; + return AT91_MASTER_CLOCK; } static inline unsigned long get_usart_clk_rate(unsigned int dev_id) { - return AT91C_MASTER_CLOCK; + return AT91_MASTER_CLOCK; } #endif /* __ASM_ARM_ARCH_CLK_H__ */ diff --git a/include/asm-arm/arch-at91sam9/gpio.h b/include/asm-arm/arch-at91sam9/gpio.h new file mode 100644 index 0000000..2500eae --- /dev/null +++ b/include/asm-arm/arch-at91sam9/gpio.h @@ -0,0 +1,366 @@ +/* + * include/asm-arm/arch-at91/gpio.h + * + * Copyright (C) 2005 HP Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_AT91_GPIO_H +#define __ASM_ARCH_AT91_GPIO_H + +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/at91_pio.h> + +#define PIN_BASE 32 + +#define MAX_GPIO_BANKS 5 + +/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ + +#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0) +#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1) +#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2) +#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3) +#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4) +#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5) +#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6) +#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7) +#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8) +#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9) +#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10) +#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11) +#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12) +#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13) +#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14) +#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15) +#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16) +#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17) +#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18) +#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19) +#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20) +#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21) +#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22) +#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23) +#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24) +#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25) +#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26) +#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27) +#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28) +#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29) +#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30) +#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31) + +#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0) +#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1) +#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2) +#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3) +#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4) +#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5) +#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6) +#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7) +#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8) +#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9) +#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10) +#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11) +#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12) +#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13) +#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14) +#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15) +#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16) +#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17) +#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18) +#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19) +#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20) +#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21) +#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22) +#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23) +#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24) +#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25) +#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26) +#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27) +#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28) +#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29) +#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30) +#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31) + +#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0) +#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1) +#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2) +#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3) +#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4) +#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5) +#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6) +#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7) +#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8) +#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9) +#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10) +#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11) +#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12) +#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13) +#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14) +#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15) +#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16) +#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17) +#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18) +#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19) +#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20) +#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21) +#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22) +#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23) +#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24) +#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25) +#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26) +#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27) +#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28) +#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29) +#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30) +#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31) + +#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0) +#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1) +#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2) +#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3) +#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4) +#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5) +#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6) +#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7) +#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8) +#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9) +#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10) +#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11) +#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12) +#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13) +#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14) +#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15) +#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16) +#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17) +#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18) +#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19) +#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20) +#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21) +#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22) +#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23) +#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24) +#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25) +#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26) +#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27) +#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28) +#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29) +#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30) +#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31) + +#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0) +#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1) +#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2) +#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3) +#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4) +#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5) +#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6) +#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7) +#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8) +#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9) +#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10) +#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11) +#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12) +#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13) +#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14) +#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15) +#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16) +#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17) +#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18) +#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19) +#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20) +#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21) +#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22) +#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23) +#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24) +#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25) +#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26) +#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27) +#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28) +#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29) +#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30) +#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31) + +static unsigned long at91_pios[] = { + AT91_PIOA, + AT91_PIOB, + AT91_PIOC, +#ifdef AT91_PIOD + AT91_PIOD, +#ifdef AT91_PIOE + AT91_PIOE +#endif +#endif +}; + +static inline void *pin_to_controller(unsigned pin) +{ + pin -= PIN_BASE; + pin /= 32; + return (void *)(AT91_BASE_SYS + at91_pios[pin]); +} + +static inline unsigned pin_to_mask(unsigned pin) +{ + pin -= PIN_BASE; + return 1 << (pin % 32); +} + +/* + * mux the pin to the "GPIO" peripheral role. + */ +static inline int at91_set_GPIO_periph(unsigned pin, int use_pullup) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_PER); + return 0; +} + +/* + * mux the pin to the "A" internal peripheral role. + */ +static inline int at91_set_A_periph(unsigned pin, int use_pullup) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_ASR); + __raw_writel(mask, pio + PIO_PDR); + return 0; +} + +/* + * mux the pin to the "B" internal peripheral role. + */ +static inline int at91_set_B_periph(unsigned pin, int use_pullup) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_BSR); + __raw_writel(mask, pio + PIO_PDR); + return 0; +} + +/* + * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and + * configure it for an input. + */ +static inline int at91_set_gpio_input(unsigned pin, int use_pullup) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_ODR); + __raw_writel(mask, pio + PIO_PER); + return 0; +} + +/* + * mux the pin to the gpio controller (instead of "A" or "B" peripheral), + * and configure it for an output. + */ +static inline int at91_set_gpio_output(unsigned pin, int value) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + PIO_PUDR); + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); + __raw_writel(mask, pio + PIO_OER); + __raw_writel(mask, pio + PIO_PER); + return 0; +} + +/* + * enable/disable the glitch filter; mostly used with IRQ handling. + */ +static inline int at91_set_deglitch(unsigned pin, int is_on) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR)); + return 0; +} + +/* + * enable/disable the multi-driver; This is only valid for output and + * allows the output pin to run as an open collector output. + */ +static inline int at91_set_multi_drive(unsigned pin, int is_on) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR)); + return 0; +} + +static inline int gpio_direction_input(unsigned pin) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!(__raw_readl(pio + PIO_PSR) & mask)) + return -EINVAL; + __raw_writel(mask, pio + PIO_ODR); + return 0; +} + +static inline int gpio_direction_output(unsigned pin, int value) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!(__raw_readl(pio + PIO_PSR) & mask)) + return -EINVAL; + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); + __raw_writel(mask, pio + PIO_OER); + return 0; +} + +/* + * assuming the pin is muxed as a gpio output, set its value. + */ +static inline int at91_set_gpio_value(unsigned pin, int value) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); + return 0; +} + +/* + * read the pin's value (works even if it's not muxed as a gpio). + */ +static inline int at91_get_gpio_value(unsigned pin) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + u32 pdsr; + + pdsr = __raw_readl(pio + PIO_PDSR); + return (pdsr & mask) != 0; +} + +#endif diff --git a/include/asm-arm/arch-at91sam9/hardware.h b/include/asm-arm/arch-at91sam9/hardware.h new file mode 100644 index 0000000..80b334f --- /dev/null +++ b/include/asm-arm/arch-at91sam9/hardware.h @@ -0,0 +1,56 @@ +/* + * include/asm-arm/arch-at91/hardware.h + * + * Copyright (C) 2003 SAN People + * Copyright (C) 2003 ATMEL + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include <asm/sizes.h> + +#if defined(CONFIG_AT91RM9200) +#include <asm/arch/at91rm9200.h> +#elif defined(CONFIG_AT91SAM9260) +#include <asm/arch/at91sam9260.h> +#define AT91_BASE_EMAC AT91SAM9260_BASE_EMAC +#define AT91_BASE_SPI AT91SAM9260_BASE_SPI0 +#define AT91_ID_UHP AT91SAM9260_ID_UHP +#define AT91_PMC_UHP AT91SAM926x_PMC_UHP +#elif defined(CONFIG_AT91SAM9261) +#include <asm/arch/at91sam9261.h> +#elif defined(CONFIG_AT91SAM9263) +#include <asm/arch/at91sam9263.h> +#elif defined(CONFIG_AT91SAM9RL) +#include <asm/arch/at91sam9rl.h> +#elif defined(CONFIG_AT91CAP9) +#include <asm/arch/at91cap9.h> +#define AT91_BASE_EMAC AT91CAP9_BASE_EMAC +#define AT91_BASE_SPI AT91CAP9_BASE_SPI0 +#define AT91_ID_UHP AT91CAP9_ID_UHP +#define AT91_PMC_UHP AT91CAP9_PMC_UHP +#elif defined(CONFIG_AT91X40) +#include <asm/arch/at91x40.h> +#else +#error "Unsupported AT91 processor" +#endif + +/* + * container_of - cast a member of a structure out to the containing structure + * + * @ptr: the pointer to the member. + * @type: the type of the container struct this is embedded in. + * @member: the name of the member within the struct. + */ +#define container_of(ptr, type, member) ({ \ + const typeof(((type *)0)->member) *__mptr = (ptr); \ + (type *)((char *)__mptr - offsetof(type, member)); }) + +#endif diff --git a/include/asm-arm/arch-at91sam9/io.h b/include/asm-arm/arch-at91sam9/io.h new file mode 100644 index 0000000..be9e9ab --- /dev/null +++ b/include/asm-arm/arch-at91sam9/io.h @@ -0,0 +1,40 @@ +/* + * include/asm-arm/arch-at91/io.h + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include <asm/io.h> + +static inline unsigned int at91_sys_read(unsigned int reg_offset) +{ + void *addr = (void *)AT91_BASE_SYS; + + return __raw_readl(addr + reg_offset); +} + +static inline void at91_sys_write(unsigned int reg_offset, unsigned long value) +{ + void *addr = (void *)AT91_BASE_SYS; + + __raw_writel(value, addr + reg_offset); +} + +#endif diff --git a/include/asm-arm/arch-at91cap9/memory-map.h b/include/asm-arm/arch-at91sam9/memory-map.h index eee7bd6..da98822 100644 --- a/include/asm-arm/arch-at91cap9/memory-map.h +++ b/include/asm-arm/arch-at91sam9/memory-map.h @@ -24,11 +24,11 @@ #ifndef __ASM_ARM_ARCH_MEMORYMAP_H__ #define __ASM_ARM_ARCH_MEMORYMAP_H__ -#include <asm/arch/AT91CAP9.h> +#include <asm/arch/hardware.h> -#define USART0_BASE AT91C_BASE_US0 -#define USART1_BASE AT91C_BASE_US1 -#define USART2_BASE AT91C_BASE_US2 -#define USART3_BASE AT91C_BASE_DBGU +#define USART0_BASE AT91_USART0 +#define USART1_BASE AT91_USART1 +#define USART2_BASE AT91_USART2 +#define USART3_BASE (AT91_BASE_SYS + AT91_DBGU) #endif /* __ASM_ARM_ARCH_MEMORYMAP_H__ */ diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h index ebcdcfe..2b3eb90 100644 --- a/include/asm-arm/arch-davinci/hardware.h +++ b/include/asm-arm/arch-davinci/hardware.h @@ -150,6 +150,8 @@ typedef volatile unsigned int * dv_reg_p; #define VDD3P3V_PWDN (0x01c40048) #define UART0_PWREMU_MGMT (0x01c20030) +#define UART1_PWREMU_MGMT (0x01c20430) +#define UART2_PWREMU_MGMT (0x01c20830) #define PSC_SILVER_BULLET (0x01c41a20) diff --git a/include/asm-arm/arch-mx31/mx31-regs.h b/include/asm-arm/arch-mx31/mx31-regs.h new file mode 100644 index 0000000..2f0d809 --- /dev/null +++ b/include/asm-arm/arch-mx31/mx31-regs.h @@ -0,0 +1,151 @@ +/* + * + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MX31_REGS_H +#define __ASM_ARCH_MX31_REGS_H + +#define __REG(x) (*((volatile u32 *)(x))) +#define __REG16(x) (*((volatile u16 *)(x))) +#define __REG8(x) (*((volatile u8 *)(x))) + +#define CCM_BASE 0x53f80000 +#define CCM_CCMR (CCM_BASE + 0x00) +#define CCM_PDR0 (CCM_BASE + 0x04) +#define CCM_PDR1 (CCM_BASE + 0x08) +#define CCM_RCSR (CCM_BASE + 0x0c) +#define CCM_MPCTL (CCM_BASE + 0x10) +#define CCM_UPCTL (CCM_BASE + 0x10) +#define CCM_SPCTL (CCM_BASE + 0x18) +#define CCM_COSR (CCM_BASE + 0x1C) + +#define CCMR_MDS (1 << 7) +#define CCMR_SBYCS (1 << 4) +#define CCMR_MPE (1 << 3) +#define CCMR_PRCS_MASK (3 << 1) +#define CCMR_FPM (1 << 1) +#define CCMR_CKIH (2 << 1) + +#define PDR0_CSI_PODF(x) (((x) & 0x1ff) << 23) +#define PDR0_PER_PODF(x) (((x) & 0x1f) << 16) +#define PDR0_HSP_PODF(x) (((x) & 0x7) << 11) +#define PDR0_NFC_PODF(x) (((x) & 0x7) << 8) +#define PDR0_IPG_PODF(x) (((x) & 0x3) << 6) +#define PDR0_MAX_PODF(x) (((x) & 0x7) << 3) +#define PDR0_MCU_PODF(x) ((x) & 0x7) + +#define PLL_PD(x) (((x) & 0xf) << 26) +#define PLL_MFD(x) (((x) & 0x3ff) << 16) +#define PLL_MFI(x) (((x) & 0xf) << 10) +#define PLL_MFN(x) (((x) & 0x3ff) << 0) + +#define WEIM_BASE 0xb8002000 +#define CSCR_U(x) (WEIM_BASE + (x) * 0x10) +#define CSCR_L(x) (WEIM_BASE + 4 + (x) * 0x10) +#define CSCR_A(x) (WEIM_BASE + 8 + (x) * 0x10) + +#define IOMUXC_BASE 0x43FAC000 +#define IOMUXC_GPR (IOMUXC_BASE + 0x8) +#define IOMUXC_SW_MUX_CTL(x) (IOMUXC_BASE + 0xc + (x) * 4) +#define IOMUXC_SW_PAD_CTL(x) (IOMUXC_BASE + 0x154 + (x) * 4) + +#define IPU_BASE 0x53fc0000 +#define IPU_CONF IPU_BASE + +#define IPU_CONF_PXL_ENDIAN (1<<8) +#define IPU_CONF_DU_EN (1<<7) +#define IPU_CONF_DI_EN (1<<6) +#define IPU_CONF_ADC_EN (1<<5) +#define IPU_CONF_SDC_EN (1<<4) +#define IPU_CONF_PF_EN (1<<3) +#define IPU_CONF_ROT_EN (1<<2) +#define IPU_CONF_IC_EN (1<<1) +#define IPU_CONF_SCI_EN (1<<0) + +#define WDOG_BASE 0x53FDC000 + +/* + * Signal Multiplexing (IOMUX) + */ + +/* bits in the SW_MUX_CTL registers */ +#define MUX_CTL_OUT_GPIO_DR (0 << 4) +#define MUX_CTL_OUT_FUNC (1 << 4) +#define MUX_CTL_OUT_ALT1 (2 << 4) +#define MUX_CTL_OUT_ALT2 (3 << 4) +#define MUX_CTL_OUT_ALT3 (4 << 4) +#define MUX_CTL_OUT_ALT4 (5 << 4) +#define MUX_CTL_OUT_ALT5 (6 << 4) +#define MUX_CTL_OUT_ALT6 (7 << 4) +#define MUX_CTL_IN_NONE (0 << 0) +#define MUX_CTL_IN_GPIO (1 << 0) +#define MUX_CTL_IN_FUNC (2 << 0) +#define MUX_CTL_IN_ALT1 (4 << 0) +#define MUX_CTL_IN_ALT2 (8 << 0) + +#define MUX_CTL_FUNC (MUX_CTL_OUT_FUNC | MUX_CTL_IN_FUNC) +#define MUX_CTL_ALT1 (MUX_CTL_OUT_ALT1 | MUX_CTL_IN_ALT1) +#define MUX_CTL_ALT2 (MUX_CTL_OUT_ALT2 | MUX_CTL_IN_ALT2) +#define MUX_CTL_GPIO (MUX_CTL_OUT_GPIO_DR | MUX_CTL_IN_GPIO) + +/* Register offsets based on IOMUXC_BASE */ +/* 0x00 .. 0x7b */ +#define MUX_CTL_RTS1 0x7c +#define MUX_CTL_CTS1 0x7d +#define MUX_CTL_DTR_DCE1 0x7e +#define MUX_CTL_DSR_DCE1 0x7f +#define MUX_CTL_CSPI2_SCLK 0x80 +#define MUX_CTL_CSPI2_SPI_RDY 0x81 +#define MUX_CTL_RXD1 0x82 +#define MUX_CTL_TXD1 0x83 +#define MUX_CTL_CSPI2_MISO 0x84 +/* 0x85 .. 0x8a */ +#define MUX_CTL_CSPI2_MOSI 0x8b + +/* The modes a specific pin can be in + * these macros can be used in mx31_gpio_mux() and have the form + * MUX_[contact name]__[pin function] + */ +#define MUX_RXD1__UART1_RXD_MUX ((MUX_CTL_FUNC << 8) | MUX_CTL_RXD1) +#define MUX_TXD1__UART1_TXD_MUX ((MUX_CTL_FUNC << 8) | MUX_CTL_TXD1) +#define MUX_RTS1__UART1_RTS_B ((MUX_CTL_FUNC << 8) | MUX_CTL_RTS1) +#define MUX_RTS1__UART1_CTS_B ((MUX_CTL_FUNC << 8) | MUX_CTL_CTS1) + +#define MUX_CSPI2_MOSI__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MOSI) +#define MUX_CSPI2_MISO__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MISO) + +/* + * Memory regions and CS + */ +#define IPU_MEM_BASE 0x70000000 +#define CSD0_BASE 0x80000000 +#define CSD1_BASE 0x90000000 +#define CS0_BASE 0xA0000000 +#define CS1_BASE 0xA8000000 +#define CS2_BASE 0xB0000000 +#define CS3_BASE 0xB2000000 +#define CS4_BASE 0xB4000000 +#define CS4_PSRAM_BASE 0xB5000000 +#define CS5_BASE 0xB6000000 +#define PCMCIA_MEM_BASE 0xC0000000 + +#endif /* __ASM_ARCH_MX31_REGS_H */ diff --git a/cpu/bf561/start1.S b/include/asm-arm/arch-mx31/mx31.h index 6d4731b..f89a401 100644 --- a/cpu/bf561/start1.S +++ b/include/asm-arm/arch-mx31/mx31.h @@ -1,7 +1,6 @@ /* - * U-boot - start1.S Code running out of RAM after relocation * - * Copyright (c) 2005-2007 Analog Devices Inc. + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> * * See file CREDITS for list of people who contributed to this * project. @@ -18,21 +17,16 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA */ -#define ASSEMBLY -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> +#ifndef __ASM_ARCH_MX31_H +#define __ASM_ARCH_MX31_H -.global start1; -.global _start1; +u32 mx31_get_mpl_dpdgck_clk(void); +u32 mx31_get_mcu_main_clk(void); +u32 mx31_get_ipg_clk(void); +void mx31_gpio_mux(unsigned long mode); -.text -_start1: -start1: - sp += -12; - call _board_init_f; - sp += 12; +#endif /* __ASM_ARCH_MX31_H */ diff --git a/include/asm-arm/arch-arm1136/bits.h b/include/asm-arm/arch-omap24xx/bits.h index 8522335..8522335 100644 --- a/include/asm-arm/arch-arm1136/bits.h +++ b/include/asm-arm/arch-omap24xx/bits.h diff --git a/include/asm-arm/arch-arm1136/clocks.h b/include/asm-arm/arch-omap24xx/clocks.h index 2a95af1..2a95af1 100644 --- a/include/asm-arm/arch-arm1136/clocks.h +++ b/include/asm-arm/arch-omap24xx/clocks.h diff --git a/include/asm-arm/arch-arm1136/i2c.h b/include/asm-arm/arch-omap24xx/i2c.h index 7248950..7248950 100644 --- a/include/asm-arm/arch-arm1136/i2c.h +++ b/include/asm-arm/arch-omap24xx/i2c.h diff --git a/include/asm-arm/arch-arm1136/mem.h b/include/asm-arm/arch-omap24xx/mem.h index c81f1c4..c81f1c4 100644 --- a/include/asm-arm/arch-arm1136/mem.h +++ b/include/asm-arm/arch-omap24xx/mem.h diff --git a/include/asm-arm/arch-arm1136/mux.h b/include/asm-arm/arch-omap24xx/mux.h index 4fdb9c6..4fdb9c6 100644 --- a/include/asm-arm/arch-arm1136/mux.h +++ b/include/asm-arm/arch-omap24xx/mux.h diff --git a/include/asm-arm/arch-arm1136/omap2420.h b/include/asm-arm/arch-omap24xx/omap2420.h index 0c11bec..0c11bec 100644 --- a/include/asm-arm/arch-arm1136/omap2420.h +++ b/include/asm-arm/arch-omap24xx/omap2420.h diff --git a/include/asm-arm/arch-arm1136/sizes.h b/include/asm-arm/arch-omap24xx/sizes.h index aaba18f..aaba18f 100644 --- a/include/asm-arm/arch-arm1136/sizes.h +++ b/include/asm-arm/arch-omap24xx/sizes.h diff --git a/include/asm-arm/arch-arm1136/sys_info.h b/include/asm-arm/arch-omap24xx/sys_info.h index 53c231a..53c231a 100644 --- a/include/asm-arm/arch-arm1136/sys_info.h +++ b/include/asm-arm/arch-omap24xx/sys_info.h diff --git a/include/asm-arm/arch-arm1136/sys_proto.h b/include/asm-arm/arch-omap24xx/sys_proto.h index 9d8e5b2..9d8e5b2 100644 --- a/include/asm-arm/arch-arm1136/sys_proto.h +++ b/include/asm-arm/arch-omap24xx/sys_proto.h diff --git a/include/asm-blackfin/blackfin-config-post.h b/include/asm-blackfin/blackfin-config-post.h index 4422225..6a1ffa1 100644 --- a/include/asm-blackfin/blackfin-config-post.h +++ b/include/asm-blackfin/blackfin-config-post.h @@ -14,9 +14,9 @@ # error Memory Map does not fit into configuration #endif -/* Sanity check BFIN_CPU */ -#ifndef BFIN_CPU -# error BFIN_CPU: your board config needs to define this +/* Sanity check CONFIG_BFIN_CPU */ +#ifndef CONFIG_BFIN_CPU +# error CONFIG_BFIN_CPU: your board config needs to define this #endif /* Make sure the structure is properly aligned */ diff --git a/include/asm-m68k/coldfire/dspi.h b/include/asm-m68k/coldfire/dspi.h index 3c579d3..8327e1b 100644 --- a/include/asm-m68k/coldfire/dspi.h +++ b/include/asm-m68k/coldfire/dspi.h @@ -64,10 +64,15 @@ typedef struct dspi { #define DSPI_DMCR_CTXF (0x00000800) #define DSPI_DMCR_DRXF (0x00001000) #define DSPI_DMCR_DTXF (0x00002000) +#define DSPI_DMCR_MDIS (0x00004000) #define DSPI_DMCR_CSIS0 (0x00010000) +#define DSPI_DMCR_CSIS1 (0x00020000) #define DSPI_DMCR_CSIS2 (0x00040000) #define DSPI_DMCR_CSIS3 (0x00080000) +#define DSPI_DMCR_CSIS4 (0x00100000) #define DSPI_DMCR_CSIS5 (0x00200000) +#define DSPI_DMCR_CSIS6 (0x00400000) +#define DSPI_DMCR_CSIS7 (0x00800000) #define DSPI_DMCR_ROOE (0x01000000) #define DSPI_DMCR_PCSSE (0x02000000) #define DSPI_DMCR_MTFE (0x04000000) @@ -92,6 +97,7 @@ typedef struct dspi { #define DSPI_DCTAR_CPHA (0x02000000) #define DSPI_DCTAR_CPOL (0x04000000) #define DSPI_DCTAR_TRSZ(x) (((x)&0x0000000F)<<27) +#define DSPI_DCTAR_DBR (0x80000000) #define DSPI_DCTAR_PCSSCK_1CLK (0x00000000) #define DSPI_DCTAR_PCSSCK_3CLK (0x00400000) #define DSPI_DCTAR_PCSSCK_5CLK (0x00800000) @@ -153,4 +159,8 @@ typedef struct dspi { /* Bit definitions and macros for DRFDR group */ #define DSPI_DRFDR_RXDATA(x) (((x)&0x0000FFFF)) +void dspi_init(void); +void dspi_tx(int chipsel, u8 attrib, u16 data); +u16 dspi_rx(void); + #endif /* __DSPI_H__ */ diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index 916bf96..f1586d5 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -180,6 +180,30 @@ #endif #endif /* CONFIG_M5272 */ +#ifdef CONFIG_M5275 +#include <asm/immap_5275.h> +#include <asm/m5275.h> + +#define CFG_FEC0_IOBASE (MMAP_FEC0) +#define CFG_FEC1_IOBASE (MMAP_FEC1) +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x40)) + +#define CFG_INTR_BASE (MMAP_INTC0) +#define CFG_NUM_IRQS (192) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_DTMR0) +#define CFG_TMR_BASE (MMAP_DTMR3) +#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprl0) +#define CFG_TMRINTR_NO (INT0_LO_DTMR3) +#define CFG_TMRINTR_MASK (INTC_IPRL_INT22) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) +#define CFG_TMRINTR_PRI (0x1E) +#define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) +#endif +#endif /* CONFIG_M5275 */ + #ifdef CONFIG_M5282 #include <asm/immap_5282.h> #include <asm/m5282.h> diff --git a/include/asm-m68k/immap_5275.h b/include/asm-m68k/immap_5275.h new file mode 100644 index 0000000..774866e --- /dev/null +++ b/include/asm-m68k/immap_5275.h @@ -0,0 +1,469 @@ +/* + * MCF5274/5 Internal Memory Map + * + * Copyright (c) 2005 Arthur Shipkowski <art@videon-central.com> + * Based on work Copyright (c) 2003 Josef Baumgartner + * <josef.baumgartner@telex.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5275__ +#define __IMMAP_5275__ + +#define MMAP_SCM (CFG_MBAR + 0x00000000) +#define MMAP_SDRAM (CFG_MBAR + 0x00000040) +#define MMAP_FBCS (CFG_MBAR + 0x00000080) +#define MMAP_DMA0 (CFG_MBAR + 0x00000100) +#define MMAP_DMA1 (CFG_MBAR + 0x00000110) +#define MMAP_DMA2 (CFG_MBAR + 0x00000120) +#define MMAP_DMA3 (CFG_MBAR + 0x00000130) +#define MMAP_UART0 (CFG_MBAR + 0x00000200) +#define MMAP_UART1 (CFG_MBAR + 0x00000240) +#define MMAP_UART2 (CFG_MBAR + 0x00000280) +#define MMAP_I2C (CFG_MBAR + 0x00000300) +#define MMAP_QSPI (CFG_MBAR + 0x00000340) +#define MMAP_DTMR0 (CFG_MBAR + 0x00000400) +#define MMAP_DTMR1 (CFG_MBAR + 0x00000440) +#define MMAP_DTMR2 (CFG_MBAR + 0x00000480) +#define MMAP_DTMR3 (CFG_MBAR + 0x000004C0) +#define MMAP_INTC0 (CFG_MBAR + 0x00000C00) +#define MMAP_INTC1 (CFG_MBAR + 0x00000D00) +#define MMAP_INTCACK (CFG_MBAR + 0x00000F00) +#define MMAP_FEC0 (CFG_MBAR + 0x00001000) +#define MMAP_FEC0FIFO (CFG_MBAR + 0x00001400) +#define MMAP_FEC1 (CFG_MBAR + 0x00001800) +#define MMAP_FEC1FIFO (CFG_MBAR + 0x00001C00) +#define MMAP_GPIO (CFG_MBAR + 0x00100000) +#define MMAP_RCM (CFG_MBAR + 0x00110000) +#define MMAP_CCM (CFG_MBAR + 0x00110004) +#define MMAP_PLL (CFG_MBAR + 0x00120000) +#define MMAP_EPORT (CFG_MBAR + 0x00130000) +#define MMAP_WDOG (CFG_MBAR + 0x00140000) +#define MMAP_PIT0 (CFG_MBAR + 0x00150000) +#define MMAP_PIT1 (CFG_MBAR + 0x00160000) +#define MMAP_PIT2 (CFG_MBAR + 0x00170000) +#define MMAP_PIT3 (CFG_MBAR + 0x00180000) +#define MMAP_MDHA (CFG_MBAR + 0x00190000) +#define MMAP_RNG (CFG_MBAR + 0x001A0000) +#define MMAP_SKHA (CFG_MBAR + 0x001B0000) +#define MMAP_USB (CFG_MBAR + 0x001C0000) +#define MMAP_PWM0 (CFG_MBAR + 0x001D0000) + +/* System configuration registers +*/ +typedef struct sys_ctrl { + u32 ipsbar; + u32 res1; + u32 rambar; + u32 res2; + u8 crsr; + u8 cwcr; + u8 lpicr; + u8 cwsr; + u8 res3[8]; + u32 mpark; + u8 mpr; + u8 res4[3]; + u8 pacr0; + u8 pacr1; + u8 pacr2; + u8 pacr3; + u8 pacr4; + u8 res5; + u8 pacr5; + u8 pacr6; + u8 pacr7; + u8 res6; + u8 pacr8; + u8 res7; + u8 gpacr; + u8 res8[3]; +} sysctrl_t; +/* SDRAM controller registers, offset: 0x040 + */ +typedef struct sdram_ctrl { + u32 sdmr; + u32 sdcr; + u32 sdcfg1; + u32 sdcfg2; + u32 sdbar0; + u32 sdbmr0; + u32 sdbar1; + u32 sdbmr1; +} sdramctrl_t; + +/* Chip select module registers, offset: 0x080 +*/ +typedef struct cs_ctlr { + u16 ar0; + u16 res1; + u32 mr0; + u16 res2; + u16 cr0; + u16 ar1; + u16 res3; + u32 mr1; + u16 res4; + u16 cr1; + u16 ar2; + u16 res5; + u32 mr2; + u16 res6; + u16 cr2; + u16 ar3; + u16 res7; + u32 mr3; + u16 res8; + u16 cr3; + u16 ar4; + u16 res9; + u32 mr4; + u16 res10; + u16 cr4; + u16 ar5; + u16 res11; + u32 mr5; + u16 res12; + u16 cr5; + u16 ar6; + u16 res13; + u32 mr6; + u16 res14; + u16 cr6; + u16 ar7; + u16 res15; + u32 mr7; + u16 res16; + u16 cr7; +} csctrl_t; + +/* DMA module registers, offset 0x100 + */ +typedef struct dma_ctrl { + u32 sar; + u32 dar; + u32 dsrbcr; + u32 dcr; +} dma_t; + +/* QSPI module registers, offset 0x340 + */ +typedef struct qspi_ctrl { + u16 qmr; + u8 res1[2]; + u16 qdlyr; + u8 res2[2]; + u16 qwr; + u8 res3[2]; + u16 qir; + u8 res4[2]; + u16 qar; + u8 res5[2]; + u16 qdr; + u8 res6[2]; +} qspi_t; + +/* Interrupt module registers, offset 0xc00 +*/ +typedef struct int_ctrl { + u32 iprh0; + u32 iprl0; + u32 imrh0; + u32 imrl0; + u32 frch0; + u32 frcl0; + u8 irlr; + u8 iacklpr; + u8 res1[0x26]; + u8 icr0[64]; /* No ICR0, done this way for readability */ + u8 res2[0x60]; + u8 swiack0; + u8 res3[3]; + u8 Lniack0_1; + u8 res4[3]; + u8 Lniack0_2; + u8 res5[3]; + u8 Lniack0_3; + u8 res6[3]; + u8 Lniack0_4; + u8 res7[3]; + u8 Lniack0_5; + u8 res8[3]; + u8 Lniack0_6; + u8 res9[3]; + u8 Lniack0_7; + u8 res10[3]; +} int0_t; + +/* GPIO port registers +*/ +typedef struct gpio_ctrl { + /* Port Output Data Registers */ + u8 podr_res1[4]; + u8 podr_busctl; + u8 podr_addr; + u8 podr_res2[2]; + u8 podr_cs; + u8 podr_res3; + u8 podr_fec0h; + u8 podr_fec0l; + u8 podr_feci2c; + u8 podr_qspi; + u8 podr_sdram; + u8 podr_timerh; + u8 podr_timerl; + u8 podr_uartl; + u8 podr_fec1h; + u8 podr_fec1l; + u8 podr_bs; + u8 podr_res4; + u8 podr_usbh; + u8 podr_usbl; + u8 podr_uarth; + u8 podr_res5[3]; + /* Port Data Direction Registers */ + u8 pddr_res1[4]; + u8 pddr_busctl; + u8 pddr_addr; + u8 pddr_res2[2]; + u8 pddr_cs; + u8 pddr_res3; + u8 pddr_fec0h; + u8 pddr_fec0l; + u8 pddr_feci2c; + u8 pddr_qspi; + u8 pddr_sdram; + u8 pddr_timerh; + u8 pddr_timerl; + u8 pddr_uartl; + u8 pddr_fec1h; + u8 pddr_fec1l; + u8 pddr_bs; + u8 pddr_res4; + u8 pddr_usbh; + u8 pddr_usbl; + u8 pddr_uarth; + u8 pddr_res5[3]; + /* Port Pin Data/Set Registers */ + u8 ppdsdr_res1[4]; + u8 ppdsdr_busctl; + u8 ppdsdr_addr; + u8 ppdsdr_res2[2]; + u8 ppdsdr_cs; + u8 ppdsdr_res3; + u8 ppdsdr_fec0h; + u8 ppdsdr_fec0l; + u8 ppdsdr_feci2c; + u8 ppdsdr_qspi; + u8 ppdsdr_sdram; + u8 ppdsdr_timerh; + u8 ppdsdr_timerl; + u8 ppdsdr_uartl; + u8 ppdsdr_fec1h; + u8 ppdsdr_fec1l; + u8 ppdsdr_bs; + u8 ppdsdr_res4; + u8 ppdsdr_usbh; + u8 ppdsdr_usbl; + u8 ppdsdr_uarth; + u8 ppdsdr_res5[3]; + /* Port Clear Output Data Registers */ + u8 pclrr_res1[4]; + u8 pclrr_busctl; + u8 pclrr_addr; + u8 pclrr_res2[2]; + u8 pclrr_cs; + u8 pclrr_res3; + u8 pclrr_fec0h; + u8 pclrr_fec0l; + u8 pclrr_feci2c; + u8 pclrr_qspi; + u8 pclrr_sdram; + u8 pclrr_timerh; + u8 pclrr_timerl; + u8 pclrr_uartl; + u8 pclrr_fec1h; + u8 pclrr_fec1l; + u8 pclrr_bs; + u8 pclrr_res4; + u8 pclrr_usbh; + u8 pclrr_usbl; + u8 pclrr_uarth; + u8 pclrr_res5[3]; + /* Pin Assignment Registers */ + u8 par_addr; + u8 par_cs; + u16 par_busctl; + u8 par_res1[2]; + u16 par_usb; + u8 par_fec0hl; + u8 par_fec1hl; + u16 par_timer; + u16 par_uart; + u16 par_qspi; + u16 par_sdram; + u16 par_feci2c; + u8 par_bs; + u8 par_res2[3]; +} gpio_t; + + +/* PWM module registers + */ +typedef struct pwm_ctrl { + u8 pwcr0; + u8 res1[3]; + u8 pwcr1; + u8 res2[3]; + u8 pwcr2; + u8 res3[7]; + u8 pwwd0; + u8 res4[3]; + u8 pwwd1; + u8 res5[3]; + u8 pwwd2; + u8 res6[7]; +} pwm_t; + +/* Watchdog registers + */ +typedef struct wdog_ctrl { + u16 wcr; + u16 wmr; + u16 wcntr; + u16 wsr; + u8 res4[114]; +} wdog_t; + +/* USB module registers +*/ +typedef struct usb { + u16 res1; + u16 fnr; + u16 res2; + u16 fnmr; + u16 res3; + u16 rfmr; + u16 res4; + u16 rfmmr; + u8 res5[3]; + u8 far; + u32 asr; + u32 drr1; + u32 drr2; + u16 res6; + u16 specr; + u16 res7; + u16 ep0sr; + u32 iep0cfg; + u32 oep0cfg; + u32 ep1cfg; + u32 ep2cfg; + u32 ep3cfg; + u32 ep4cfg; + u32 ep5cfg; + u32 ep6cfg; + u32 ep7cfg; + u32 ep0ctl; + u16 res8; + u16 ep1ctl; + u16 res9; + u16 ep2ctl; + u16 res10; + u16 ep3ctl; + u16 res11; + u16 ep4ctl; + u16 res12; + u16 ep5ctl; + u16 res13; + u16 ep6ctl; + u16 res14; + u16 ep7ctl; + u32 ep0isr; + u16 res15; + u16 ep1isr; + u16 res16; + u16 ep2isr; + u16 res17; + u16 ep3isr; + u16 res18; + u16 ep4isr; + u16 res19; + u16 ep5isr; + u16 res20; + u16 ep6isr; + u16 res21; + u16 ep7isr; + u32 ep0imr; + u16 res22; + u16 ep1imr; + u16 res23; + u16 ep2imr; + u16 res24; + u16 ep3imr; + u16 res25; + u16 ep4imr; + u16 res26; + u16 ep5imr; + u16 res27; + u16 ep6imr; + u16 res28; + u16 ep7imr; + u32 ep0dr; + u32 ep1dr; + u32 ep2dr; + u32 ep3dr; + u32 ep4dr; + u32 ep5dr; + u32 ep6dr; + u32 ep7dr; + u16 res29; + u16 ep0dpr; + u16 res30; + u16 ep1dpr; + u16 res31; + u16 ep2dpr; + u16 res32; + u16 ep3dpr; + u16 res33; + u16 ep4dpr; + u16 res34; + u16 ep5dpr; + u16 res35; + u16 ep6dpr; + u16 res36; + u16 ep7dpr; + u8 res37[788]; + u8 cfgram[1024]; +} usb_t; + +/* PLL module registers + */ +typedef struct pll_ctrl { + u32 syncr; + u32 synsr; +} pll_t; + +typedef struct rcm { + u8 rcr; + u8 rsr; +} rcm_t; + +#endif /* __IMMAP_5275__ */ diff --git a/include/asm-m68k/m5275.h b/include/asm-m68k/m5275.h new file mode 100644 index 0000000..89c6c92 --- /dev/null +++ b/include/asm-m68k/m5275.h @@ -0,0 +1,241 @@ +/* + * MCF5275 Internal Memory Map + * + * Copyright (C) 2003-2004, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 2004-2008 Arthur Shipkowski (art@videon-central.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __M5275_H__ +#define __M5275_H__ + +/* + * Define the 5275 SIM register set addresses. These are similar, + * but not quite identical to the 5282 registers and offsets. + */ +#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ +#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */ +#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ +#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ +#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ +#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ +#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ +#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ +#define MCFINTC_IRLR 0x18 /* */ +#define MCFINTC_IACKL 0x19 /* */ +#define MCFINTC_ICR0 0x40 /* Base ICR register */ + +#define MCF_GPIO_PAR_UART 0x10007c +#define UART0_ENABLE_MASK 0x000f +#define UART1_ENABLE_MASK 0x00f0 +#define UART2_ENABLE_MASK 0x3f00 + +#define MCF_GPIO_PAR_FECI2C 0x100082 +#define PAR_SDA_ENABLE_MASK 0x0003 +#define PAR_SCL_ENABLE_MASK 0x000c + +#define MCFSIM_WRRR 0x140000 +#define MCFSIM_SDCR 0x40 + +/********************************************************************* + * SDRAM Controller (SDRAMC) + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_SDRAMC_SDMR (*(vuint32*)(void*)(&__IPSBAR[0x000040])) +#define MCF_SDRAMC_SDCR (*(vuint32*)(void*)(&__IPSBAR[0x000044])) +#define MCF_SDRAMC_SDCFG1 (*(vuint32*)(void*)(&__IPSBAR[0x000048])) +#define MCF_SDRAMC_SDCFG2 (*(vuint32*)(void*)(&__IPSBAR[0x00004C])) +#define MCF_SDRAMC_SDBAR0 (*(vuint32*)(void*)(&__IPSBAR[0x000050])) +#define MCF_SDRAMC_SDBAR1 (*(vuint32*)(void*)(&__IPSBAR[0x000058])) +#define MCF_SDRAMC_SDMR0 (*(vuint32*)(void*)(&__IPSBAR[0x000054])) +#define MCF_SDRAMC_SDMR1 (*(vuint32*)(void*)(&__IPSBAR[0x00005C])) + +/* Bit definitions and macros for MCF_SDRAMC_SDMR */ +#define MCF_SDRAMC_SDMR_CMD (0x00010000) +#define MCF_SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) +#define MCF_SDRAMC_SDMR_BNKAD(x) (((x)&0x00000003)<<30) +#define MCF_SDRAMC_SDMR_BNKAD_LMR (0x00000000) +#define MCF_SDRAMC_SDMR_BNKAD_LEMR (0x40000000) + +/* Bit definitions and macros for MCF_SDRAMC_SDCR */ +#define MCF_SDRAMC_SDCR_IPALL (0x00000002) +#define MCF_SDRAMC_SDCR_IREF (0x00000004) +#define MCF_SDRAMC_SDCR_DQS_OE(x) (((x)&0x00000003)<<10) +#define MCF_SDRAMC_SDCR_DQP_BP (0x00008000) +#define MCF_SDRAMC_SDCR_RCNT(x) (((x)&0x0000003F)<<16) +#define MCF_SDRAMC_SDCR_MUX(x) (((x)&0x00000003)<<24) +#define MCF_SDRAMC_SDCR_REF (0x10000000) +#define MCF_SDRAMC_SDCR_CKE (0x40000000) +#define MCF_SDRAMC_SDCR_MODE_EN (0x80000000) + +/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */ +#define MCF_SDRAMC_SDCFG1_WTLAT(x) (((x)&0x00000007)<<4) +#define MCF_SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) +#define MCF_SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) +#define MCF_SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) +#define MCF_SDRAMC_SDCFG1_RDLAT(x) (((x)&0x0000000F)<<20) +#define MCF_SDRAMC_SDCFG1_SWT2RD(x) (((x)&0x00000007)<<24) +#define MCF_SDRAMC_SDCFG1_SRD2RW(x) (((x)&0x0000000F)<<28) + +/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */ +#define MCF_SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) +#define MCF_SDRAMC_SDCFG2_BRD2WT(x) (((x)&0x0000000F)<<20) +#define MCF_SDRAMC_SDCFG2_BWT2RW(x) (((x)&0x0000000F)<<24) +#define MCF_SDRAMC_SDCFG2_BRD2PRE(x) (((x)&0x0000000F)<<28) + +/* Bit definitions and macros for MCF_SDRAMC_SDBARn */ +#define MCF_SDRAMC_SDBARn_BASE(x) (((x)&0x00003FFF)<<18) +#define MCF_SDRAMC_SDBARn_BA(x) ((x)&0xFFFF0000) + +/* Bit definitions and macros for MCF_SDRAMC_SDMRn */ +#define MCF_SDRAMC_SDMRn_V (0x00000001) +#define MCF_SDRAMC_SDMRn_WP (0x00000080) +#define MCF_SDRAMC_SDMRn_MASK(x) (((x)&0x00003FFF)<<18) +#define MCF_SDRAMC_SDMRn_BAM_4G (0xFFFF0000) +#define MCF_SDRAMC_SDMRn_BAM_2G (0x7FFF0000) +#define MCF_SDRAMC_SDMRn_BAM_1G (0x3FFF0000) +#define MCF_SDRAMC_SDMRn_BAM_1024M (0x3FFF0000) +#define MCF_SDRAMC_SDMRn_BAM_512M (0x1FFF0000) +#define MCF_SDRAMC_SDMRn_BAM_256M (0x0FFF0000) +#define MCF_SDRAMC_SDMRn_BAM_128M (0x07FF0000) +#define MCF_SDRAMC_SDMRn_BAM_64M (0x03FF0000) +#define MCF_SDRAMC_SDMRn_BAM_32M (0x01FF0000) +#define MCF_SDRAMC_SDMRn_BAM_16M (0x00FF0000) +#define MCF_SDRAMC_SDMRn_BAM_8M (0x007F0000) +#define MCF_SDRAMC_SDMRn_BAM_4M (0x003F0000) +#define MCF_SDRAMC_SDMRn_BAM_2M (0x001F0000) +#define MCF_SDRAMC_SDMRn_BAM_1M (0x000F0000) +#define MCF_SDRAMC_SDMRn_BAM_1024K (0x000F0000) +#define MCF_SDRAMC_SDMRn_BAM_512K (0x00070000) +#define MCF_SDRAMC_SDMRn_BAM_256K (0x00030000) +#define MCF_SDRAMC_SDMRn_BAM_128K (0x00010000) +#define MCF_SDRAMC_SDMRn_BAM_64K (0x00000000) + +/********************************************************************* + * Interrupt Controller (INTC) + ********************************************************************/ +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT1 (1) +#define INT0_LO_EPORT2 (2) +#define INT0_LO_EPORT3 (3) +#define INT0_LO_EPORT4 (4) +#define INT0_LO_EPORT5 (5) +#define INT0_LO_EPORT6 (6) +#define INT0_LO_EPORT7 (7) +#define INT0_LO_SCM (8) +#define INT0_LO_DMA0 (9) +#define INT0_LO_DMA1 (10) +#define INT0_LO_DMA2 (11) +#define INT0_LO_DMA3 (12) +#define INT0_LO_UART0 (13) +#define INT0_LO_UART1 (14) +#define INT0_LO_UART2 (15) +#define INT0_LO_RSVD1 (16) +#define INT0_LO_I2C (17) +#define INT0_LO_QSPI (18) +#define INT0_LO_DTMR0 (19) +#define INT0_LO_DTMR1 (20) +#define INT0_LO_DTMR2 (21) +#define INT0_LO_DTMR3 (22) +#define INT0_LO_FEC0_TXF (23) +#define INT0_LO_FEC0_TXB (24) +#define INT0_LO_FEC0_UN (25) +#define INT0_LO_FEC0_RL (26) +#define INT0_LO_FEC0_RXF (27) +#define INT0_LO_FEC0_RXB (28) +#define INT0_LO_FEC0_MII (29) +#define INT0_LO_FEC0_LC (30) +#define INT0_LO_FEC0_HBERR (31) +#define INT0_HI_FEC0_GRA (32) +#define INT0_HI_FEC0_EBERR (33) +#define INT0_HI_FEC0_BABT (34) +#define INT0_HI_FEC0_BABR (35) +#define INT0_HI_PIT0 (36) +#define INT0_HI_PIT1 (37) +#define INT0_HI_PIT2 (38) +#define INT0_HI_PIT3 (39) +#define INT0_HI_RNG (40) +#define INT0_HI_SKHA (41) +#define INT0_HI_MDHA (42) +#define INT0_HI_USB (43) +#define INT0_HI_USB_EP0 (44) +#define INT0_HI_USB_EP1 (45) +#define INT0_HI_USB_EP2 (46) +#define INT0_HI_USB_EP3 (47) +/* 48-63 Reserved */ + +/* 0-22 Reserved */ +#define INT1_LO_FEC1_TXF (23) +#define INT1_LO_FEC1_TXB (24) +#define INT1_LO_FEC1_UN (25) +#define INT1_LO_FEC1_RL (26) +#define INT1_LO_FEC1_RXF (27) +#define INT1_LO_FEC1_RXB (28) +#define INT1_LO_FEC1_MII (29) +#define INT1_LO_FEC1_LC (30) +#define INT1_LO_FEC1_HBERR (31) +#define INT1_HI_FEC1_GRA (32) +#define INT1_HI_FEC1_EBERR (33) +#define INT1_HI_FEC1_BABT (34) +#define INT1_HI_FEC1_BABR (35) +/* 36-63 Reserved */ + +/* Bit definitions and macros for INTC_IPRL */ +#define INTC_IPRL_INT31 (0x80000000) +#define INTC_IPRL_INT30 (0x40000000) +#define INTC_IPRL_INT29 (0x20000000) +#define INTC_IPRL_INT28 (0x10000000) +#define INTC_IPRL_INT27 (0x08000000) +#define INTC_IPRL_INT26 (0x04000000) +#define INTC_IPRL_INT25 (0x02000000) +#define INTC_IPRL_INT24 (0x01000000) +#define INTC_IPRL_INT23 (0x00800000) +#define INTC_IPRL_INT22 (0x00400000) +#define INTC_IPRL_INT21 (0x00200000) +#define INTC_IPRL_INT20 (0x00100000) +#define INTC_IPRL_INT19 (0x00080000) +#define INTC_IPRL_INT18 (0x00040000) +#define INTC_IPRL_INT17 (0x00020000) +#define INTC_IPRL_INT16 (0x00010000) +#define INTC_IPRL_INT15 (0x00008000) +#define INTC_IPRL_INT14 (0x00004000) +#define INTC_IPRL_INT13 (0x00002000) +#define INTC_IPRL_INT12 (0x00001000) +#define INTC_IPRL_INT11 (0x00000800) +#define INTC_IPRL_INT10 (0x00000400) +#define INTC_IPRL_INT9 (0x00000200) +#define INTC_IPRL_INT8 (0x00000100) +#define INTC_IPRL_INT7 (0x00000080) +#define INTC_IPRL_INT6 (0x00000040) +#define INTC_IPRL_INT5 (0x00000020) +#define INTC_IPRL_INT4 (0x00000010) +#define INTC_IPRL_INT3 (0x00000008) +#define INTC_IPRL_INT2 (0x00000004) +#define INTC_IPRL_INT1 (0x00000002) +#define INTC_IPRL_INT0 (0x00000001) + +/* Bit definitions and macros for RCR */ +#define RCM_RCR_FRCRSTOUT (0x40) +#define RCM_RCR_SOFTRST (0x80) + +#define FMPLL_SYNSR_LOCK (0x00000008) + +#endif /* __M5275_H__ */ diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index b43dba3..9ccf7d6 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -74,7 +74,6 @@ typedef struct global_data { u32 enc_clk; u32 lbiu_clk; u32 lclk_clk; - u32 ddr_clk; u32 pci_clk; #if defined(CONFIG_MPC837X) u32 pciexp1_clk; @@ -84,7 +83,7 @@ typedef struct global_data { u32 sata_clk; #endif #if defined(CONFIG_MPC8360) - u32 ddr_sec_clk; + u32 mem_sec_clk; #endif /* CONFIG_MPC8360 */ #endif #if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h new file mode 100644 index 0000000..67474c7 --- /dev/null +++ b/include/asm-sh/cache.h @@ -0,0 +1,35 @@ +#ifndef __ASM_SH_CACHE_H +#define __ASM_SH_CACHE_H + +#if defined(CONFIG_SH4) || defined(CONFIG_SH4A) + +#define L1_CACHE_BYTES 32 +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct *)(x)) + +void dcache_wback_range(u32 start, u32 end) +{ + u32 v; + + start &= ~(L1_CACHE_BYTES-1); + for (v = start; v < end; v+=L1_CACHE_BYTES) { + asm volatile("ocbwb %0" + : /* no output */ + : "m" (__m(v))); + } +} + +void dcache_invalid_range(u32 start, u32 end) +{ + u32 v; + + start &= ~(L1_CACHE_BYTES-1); + for (v = start; v < end; v+=L1_CACHE_BYTES) { + asm volatile("ocbi %0" + : /* no output */ + : "m" (__m(v))); + } +} +#endif /* CONFIG_SH4 || CONFIG_SH4A */ + +#endif /* __ASM_SH_CACHE_H */ diff --git a/include/asm-sh/cpu_sh4.h b/include/asm-sh/cpu_sh4.h index 2658039..c200ba5 100644 --- a/include/asm-sh/cpu_sh4.h +++ b/include/asm-sh/cpu_sh4.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * (C) Copyright 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -30,12 +30,15 @@ #define CACHE_OC_NUM_ENTRIES 512 #define CACHE_OC_ENTRY_SHIFT 5 -#if defined (CONFIG_CPU_SH7750) -#include <asm/cpu_sh7750.h> +#if defined (CONFIG_CPU_SH7750) || \ + defined(CONFIG_CPU_SH7751) +# include <asm/cpu_sh7750.h> #elif defined (CONFIG_CPU_SH7722) -#include <asm/cpu_sh7722.h> +# include <asm/cpu_sh7722.h> +#elif defined (CONFIG_CPU_SH7780) +# include <asm/cpu_sh7780.h> #else -#error "Unknown SH4 variant" +# error "Unknown SH4 variant" #endif #endif /* _ASM_CPU_SH4_H_ */ diff --git a/include/asm-sh/cpu_sh7720.h b/include/asm-sh/cpu_sh7720.h index bafb8de..1b393b8 100644 --- a/include/asm-sh/cpu_sh7720.h +++ b/include/asm-sh/cpu_sh7720.h @@ -1,5 +1,9 @@ /* - * (C) Copyright 2007 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * Copyright 2007 (C) + * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * Copyright 2008 (C) + * Mark Jonas <mark.jonas@de.bosch.com> * * SH7720 Internal I/O register * @@ -201,6 +205,25 @@ #define PSELD (PFC_BASE + 0x2A) /* I/O Port */ +#define PORT_BASE 0xA4050100 +#define PADR (PORT_BASE + 0x40) +#define PBDR (PORT_BASE + 0x42) +#define PCDR (PORT_BASE + 0x44) +#define PDDR (PORT_BASE + 0x46) +#define PEDR (PORT_BASE + 0x48) +#define PFDR (PORT_BASE + 0x4A) +#define PGDR (PORT_BASE + 0x4C) +#define PHDR (PORT_BASE + 0x4E) +#define PJDR (PORT_BASE + 0x50) +#define PKDR (PORT_BASE + 0x52) +#define PLDR (PORT_BASE + 0x54) +#define PMDR (PORT_BASE + 0x56) +#define PPDR (PORT_BASE + 0x58) +#define PRDR (PORT_BASE + 0x5A) +#define PSDR (PORT_BASE + 0x5C) +#define PTDR (PORT_BASE + 0x5E) +#define PUDR (PORT_BASE + 0x60) +#define PVDR (PORT_BASE + 0x62) /* H-UDI */ diff --git a/include/asm-sh/cpu_sh7750.h b/include/asm-sh/cpu_sh7750.h index bb6461a..3c3c309 100644 --- a/include/asm-sh/cpu_sh7750.h +++ b/include/asm-sh/cpu_sh7750.h @@ -25,10 +25,10 @@ #ifdef CONFIG_CPU_TYPE_R #define CACHE_OC_NUM_WAYS 2 -#define CCR_CACHE_INIT 0x8000090d /* EMODE,ICI,ICE(16k),OCI,P1-wb,OCE(32k) */ +#define CCR_CACHE_INIT 0x8000090D /* EMODE,ICI,ICE(16k),OCI,P1-wb,OCE(32k) */ #else #define CACHE_OC_NUM_WAYS 1 -#define CCR_CACHE_INIT 0x0000090b +#define CCR_CACHE_INIT 0x0000090B #endif /* OCN */ diff --git a/include/asm-sh/cpu_sh7780.h b/include/asm-sh/cpu_sh7780.h new file mode 100644 index 0000000..d4f824e --- /dev/null +++ b/include/asm-sh/cpu_sh7780.h @@ -0,0 +1,503 @@ +#ifndef _ASM_CPU_SH7780_H_ +#define _ASM_CPU_SH7780_H_ + +/* + * Copyright (c) 2007,2008 Nobuhiro Iwamatsu + * Copyright (c) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#define CACHE_OC_NUM_WAYS 1 +#define CCR_CACHE_INIT 0x0000090b + +/* Exceptions */ +#define TRA 0xFF000020 +#define EXPEVT 0xFF000024 +#define INTEVT 0xFF000028 + +/* Memory Management Unit */ +#define PTEH 0xFF000000 +#define PTEL 0xFF000004 +#define TTB 0xFF000008 +#define TEA 0xFF00000C +#define MMUCR 0xFF000010 +#define PASCR 0xFF000070 +#define IRMCR 0xFF000078 + +/* Cache Controller */ +#define CCR 0xFF00001C +#define QACR0 0xFF000038 +#define QACR1 0xFF00003C +#define RAMCR 0xFF000074 + +/* L Memory */ +#define RAMCR 0xFF000074 +#define LSA0 0xFF000050 +#define LSA1 0xFF000054 +#define LDA0 0xFF000058 +#define LDA1 0xFF00005C + +/* Interrupt Controller */ +#define ICR0 0xFFD00000 +#define ICR1 0xFFD0001C +#define INTPRI 0xFFD00010 +#define INTREQ 0xFFD00024 +#define INTMSK0 0xFFD00044 +#define INTMSK1 0xFFD00048 +#define INTMSK2 0xFFD40080 +#define INTMSKCLR0 0xFFD00064 +#define INTMSKCLR1 0xFFD00068 +#define INTMSKCLR2 0xFFD40084 +#define NMIFCR 0xFFD000C0 +#define USERIMASK 0xFFD30000 +#define INT2PRI0 0xFFD40000 +#define INT2PRI1 0xFFD40004 +#define INT2PRI2 0xFFD40008 +#define INT2PRI3 0xFFD4000C +#define INT2PRI4 0xFFD40010 +#define INT2PRI5 0xFFD40014 +#define INT2PRI6 0xFFD40018 +#define INT2PRI7 0xFFD4001C +#define INT2A0 0xFFD40030 +#define INT2A1 0xFFD40034 +#define INT2MSKR 0xFFD40038 +#define INT2MSKCR 0xFFD4003C +#define INT2B0 0xFFD40040 +#define INT2B1 0xFFD40044 +#define INT2B2 0xFFD40048 +#define INT2B3 0xFFD4004C +#define INT2B4 0xFFD40050 +#define INT2B5 0xFFD40054 +#define INT2B6 0xFFD40058 +#define INT2B7 0xFFD4005C +#define INT2GPIC 0xFFD40090 + +/* local Bus State Controller */ +#define MMSELR 0xFF400020 +#define BCR 0xFF801000 +#define CS0BCR 0xFF802000 +#define CS1BCR 0xFF802010 +#define CS2BCR 0xFF802020 +#define CS4BCR 0xFF802040 +#define CS5BCR 0xFF802050 +#define CS6BCR 0xFF802060 +#define CS0WCR 0xFF802008 +#define CS1WCR 0xFF802018 +#define CS2WCR 0xFF802028 +#define CS4WCR 0xFF802048 +#define CS5WCR 0xFF802058 +#define CS6WCR 0xFF802068 +#define CS5PCR 0xFF802070 +#define CS6PCR 0xFF802080 + +/* DDR-SDRAM I/F */ +#define MIM_1 0xFE800008 +#define MIM_2 0xFE80000C +#define SCR_1 0xFE800010 +#define SCR_2 0xFE800014 +#define STR_1 0xFE800018 +#define STR_2 0xFE80001C +#define SDR_1 0xFE800030 +#define SDR_2 0xFE800034 +#define DBK_1 0xFE800400 +#define DBK_2 0xFE800404 + +/* PCI Controller */ +#define SH7780_PCIECR 0xFE000008 +#define SH7780_PCIVID 0xFE040000 +#define SH7780_PCIDID 0xFE040002 +#define SH7780_PCICMD 0xFE040004 +#define SH7780_PCISTATUS 0xFE040006 +#define SH7780_PCIRID 0xFE040008 +#define SH7780_PCIPIF 0xFE040009 +#define SH7780_PCISUB 0xFE04000A +#define SH7780_PCIBCC 0xFE04000B +#define SH7780_PCICLS 0xFE04000C +#define SH7780_PCILTM 0xFE04000D +#define SH7780_PCIHDR 0xFE04000E +#define SH7780_PCIBIST 0xFE04000F +#define SH7780_PCIIBAR 0xFE040010 +#define SH7780_PCIMBAR0 0xFE040014 +#define SH7780_PCIMBAR1 0xFE040018 +#define SH7780_PCISVID 0xFE04002C +#define SH7780_PCISID 0xFE04002E +#define SH7780_PCICP 0xFE040034 +#define SH7780_PCIINTLINE 0xFE04003C +#define SH7780_PCIINTPIN 0xFE04003D +#define SH7780_PCIMINGNT 0xFE04003E +#define SH7780_PCIMAXLAT 0xFE04003F +#define SH7780_PCICID 0xFE040040 +#define SH7780_PCINIP 0xFE040041 +#define SH7780_PCIPMC 0xFE040042 +#define SH7780_PCIPMCSR 0xFE040044 +#define SH7780_PCIPMCSRBSE 0xFE040046 +#define SH7780_PCI_CDD 0xFE040047 +#define SH7780_PCICR 0xFE040100 +#define SH7780_PCILSR0 0xFE040104 +#define SH7780_PCILSR1 0xFE040108 +#define SH7780_PCILAR0 0xFE04010C +#define SH7780_PCILAR1 0xFE040110 +#define SH7780_PCIIR 0xFE040114 +#define SH7780_PCIIMR 0xFE040118 +#define SH7780_PCIAIR 0xFE04011C +#define SH7780_PCICIR 0xFE040120 +#define SH7780_PCIAINT 0xFE040130 +#define SH7780_PCIAINTM 0xFE040134 +#define SH7780_PCIBMIR 0xFE040138 +#define SH7780_PCIPAR 0xFE0401C0 +#define SH7780_PCIPINT 0xFE0401CC +#define SH7780_PCIPINTM 0xFE0401D0 +#define SH7780_PCIMBR0 0xFE0401E0 +#define SH7780_PCIMBMR0 0xFE0401E4 +#define SH7780_PCIMBR1 0xFE0401E8 +#define SH7780_PCIMBMR1 0xFE0401EC +#define SH7780_PCIMBR2 0xFE0401F0 +#define SH7780_PCIMBMR2 0xFE0401F4 +#define SH7780_PCIIOBR 0xFE0401F8 +#define SH7780_PCIIOBMR 0xFE0401FC +#define SH7780_PCICSCR0 0xFE040210 +#define SH7780_PCICSCR1 0xFE040214 +#define SH7780_PCICSAR0 0xFE040218 +#define SH7780_PCICSAR1 0xFE04021C +#define SH7780_PCIPDR 0xFE040220 + +/* DMAC */ +#define DMAC_SAR0 0xFC808020 +#define DMAC_DAR0 0xFC808024 +#define DMAC_TCR0 0xFC808028 +#define DMAC_CHCR0 0xFC80802C +#define DMAC_SAR1 0xFC808030 +#define DMAC_DAR1 0xFC808034 +#define DMAC_TCR1 0xFC808038 +#define DMAC_CHCR1 0xFC80803C +#define DMAC_SAR2 0xFC808040 +#define DMAC_DAR2 0xFC808044 +#define DMAC_TCR2 0xFC808048 +#define DMAC_CHCR2 0xFC80804C +#define DMAC_SAR3 0xFC808050 +#define DMAC_DAR3 0xFC808054 +#define DMAC_TCR3 0xFC808058 +#define DMAC_CHCR3 0xFC80805C +#define DMAC_DMAOR0 0xFC808060 +#define DMAC_SAR4 0xFC808070 +#define DMAC_DAR4 0xFC808074 +#define DMAC_TCR4 0xFC808078 +#define DMAC_CHCR4 0xFC80807C +#define DMAC_SAR5 0xFC808080 +#define DMAC_DAR5 0xFC808084 +#define DMAC_TCR5 0xFC808088 +#define DMAC_CHCR5 0xFC80808C +#define DMAC_SARB0 0xFC808120 +#define DMAC_DARB0 0xFC808124 +#define DMAC_TCRB0 0xFC808128 +#define DMAC_SARB1 0xFC808130 +#define DMAC_DARB1 0xFC808134 +#define DMAC_TCRB1 0xFC808138 +#define DMAC_SARB2 0xFC808140 +#define DMAC_DARB2 0xFC808144 +#define DMAC_TCRB2 0xFC808148 +#define DMAC_SARB3 0xFC808150 +#define DMAC_DARB3 0xFC808154 +#define DMAC_TCRB3 0xFC808158 +#define DMAC_DMARS0 0xFC809000 +#define DMAC_DMARS1 0xFC809004 +#define DMAC_DMARS2 0xFC809008 +#define DMAC_SAR6 0xFC818020 +#define DMAC_DAR6 0xFC818024 +#define DMAC_TCR6 0xFC818028 +#define DMAC_CHCR6 0xFC81802C +#define DMAC_SAR7 0xFC818030 +#define DMAC_DAR7 0xFC818034 +#define DMAC_TCR7 0xFC818038 +#define DMAC_CHCR7 0xFC81803C +#define DMAC_SAR8 0xFC818040 +#define DMAC_DAR8 0xFC818044 +#define DMAC_TCR8 0xFC818048 +#define DMAC_CHCR8 0xFC81804C +#define DMAC_SAR9 0xFC818050 +#define DMAC_DAR9 0xFC818054 +#define DMAC_TCR9 0xFC818058 +#define DMAC_CHCR9 0xFC81805C +#define DMAC_DMAOR1 0xFC818060 +#define DMAC_SAR10 0xFC818070 +#define DMAC_DAR10 0xFC818074 +#define DMAC_TCR10 0xFC818078 +#define DMAC_CHCR10 0xFC81807C +#define DMAC_SAR11 0xFC818080 +#define DMAC_DAR11 0xFC818084 +#define DMAC_TCR11 0xFC818088 +#define DMAC_CHCR11 0xFC81808C +#define DMAC_SARB6 0xFC818120 +#define DMAC_DARB6 0xFC818124 +#define DMAC_TCRB6 0xFC818128 +#define DMAC_SARB7 0xFC818130 +#define DMAC_DARB7 0xFC818134 +#define DMAC_TCRB7 0xFC818138 +#define DMAC_SARB8 0xFC818140 +#define DMAC_DARB8 0xFC818144 +#define DMAC_TCRB8 0xFC818148 +#define DMAC_SARB9 0xFC818150 +#define DMAC_DARB9 0xFC818154 +#define DMAC_TCRB9 0xFC818158 + +/* Clock Pulse Generator */ +#define FRQCR 0xFFC80000 +#define PLLCR 0xFFC80024 +#define MSTPCR 0xFFC80030 + +/* Watchdog Timer and Reset */ +#define WTCNT WDTCNT +#define WDTST 0xFFCC0000 +#define WDTCSR 0xFFCC0004 +#define WDTBST 0xFFCC0008 +#define WDTCNT 0xFFCC0010 +#define WDTBCNT 0xFFCC0018 + +/* System Control */ +#define MSTPCR 0xFFC80030 + +/* Timer Unit */ +#define TSTR TSTR0 +#define TOCR 0xFFD80000 +#define TSTR0 0xFFD80004 +#define TCOR0 0xFFD80008 +#define TCNT0 0xFFD8000C +#define TCR0 0xFFD80010 +#define TCOR1 0xFFD80014 +#define TCNT1 0xFFD80018 +#define TCR1 0xFFD8001C +#define TCOR2 0xFFD80020 +#define TCNT2 0xFFD80024 +#define TCR2 0xFFD80028 +#define TCPR2 0xFFD8002C +#define TSTR1 0xFFDC0004 +#define TCOR3 0xFFDC0008 +#define TCNT3 0xFFDC000C +#define TCR3 0xFFDC0010 +#define TCOR4 0xFFDC0014 +#define TCNT4 0xFFDC0018 +#define TCR4 0xFFDC001C +#define TCOR5 0xFFDC0020 +#define TCNT5 0xFFDC0024 +#define TCR5 0xFFDC0028 + +/* Timer/Counter */ +#define CMTCFG 0xFFE30000 +#define CMTFRT 0xFFE30004 +#define CMTCTL 0xFFE30008 +#define CMTIRQS 0xFFE3000C +#define CMTCH0T 0xFFE30010 +#define CMTCH0ST 0xFFE30020 +#define CMTCH0C 0xFFE30030 +#define CMTCH1T 0xFFE30014 +#define CMTCH1ST 0xFFE30024 +#define CMTCH1C 0xFFE30034 +#define CMTCH2T 0xFFE30018 +#define CMTCH2C 0xFFE30038 +#define CMTCH3T 0xFFE3001C +#define CMTCH3C 0xFFE3003C + +/* Realtime Clock */ +#define R64CNT 0xFFE80000 +#define RSECCNT 0xFFE80004 +#define RMINCNT 0xFFE80008 +#define RHRCNT 0xFFE8000C +#define RWKCNT 0xFFE80010 +#define RDAYCNT 0xFFE80014 +#define RMONCNT 0xFFE80018 +#define RYRCNT 0xFFE8001C +#define RSECAR 0xFFE80020 +#define RMINAR 0xFFE80024 +#define RHRAR 0xFFE80028 +#define RWKAR 0xFFE8002C +#define RDAYAR 0xFFE80030 +#define RMONAR 0xFFE80034 +#define RCR1 0xFFE80038 +#define RCR2 0xFFE8003C +#define RCR3 0xFFE80050 +#define RYRAR 0xFFE80054 + +/* Serial Communication Interface with FIFO */ +#define SCIF0_BASE SCSMR0 +#define SCSMR0 0xFFE00000 +#define SCBRR0 0xFFE00004 +#define SCSCR0 0xFFE00008 +#define SCFSR0 0xFFE00010 +#define SCFCR0 0xFFE00018 +#define SCTFDR0 0xFFE0001C +#define SCRFDR0 0xFFE00020 +#define SCSPTR0 0xFFE00024 +#define SCLSR0 0xFFE00028 +#define SCRER0 0xFFE0002C +#define SCSMR1 0xFFE10000 +#define SCBRR1 0xFFE10004 +#define SCSCR1 0xFFE10008 +#define SCFSR1 0xFFE10010 +#define SCFCR1 0xFFE10018 +#define SCTFDR1 0xFFE1001C +#define SCRFDR1 0xFFE10020 +#define SCSPTR1 0xFFE10024 +#define SCLSR1 0xFFE10028 +#define SCRER1 0xFFE1002C + +/* Serial I/O with FIFO */ +#define SIMDR 0xFFE20000 +#define SISCR 0xFFE20002 +#define SITDAR 0xFFE20004 +#define SIRDAR 0xFFE20006 +#define SICDAR 0xFFE20008 +#define SICTR 0xFFE2000C +#define SIFCTR 0xFFE20010 +#define SISTR 0xFFE20014 +#define SIIER 0xFFE20016 +#define SITCR 0xFFE20028 +#define SIRCR 0xFFE2002C +#define SPICR 0xFFE20030 + +/* Serial Protocol Interface */ +#define SPCR 0xFFE50000 +#define SPSR 0xFFE50004 +#define SPSCR 0xFFE50008 +#define SPTBR 0xFFE5000C +#define SPRBR 0xFFE50010 + +/* Multimedia Card Interface */ +#define CMDR0 0xFFE60000 +#define CMDR1 0xFFE60001 +#define CMDR2 0xFFE60002 +#define CMDR3 0xFFE60003 +#define CMDR4 0xFFE60004 +#define CMDR5 0xFFE60005 +#define CMDSTRT 0xFFE60006 +#define OPCR 0xFFE6000A +#define CSTR 0xFFE6000B +#define INTCR0 0xFFE6000C +#define INTCR1 0xFFE6000D +#define INTSTR0 0xFFE6000E +#define INTSTR1 0xFFE6000F +#define CLKON 0xFFE60010 +#define CTOCR 0xFFE60011 +#define TBCR 0xFFE60014 +#define MODER 0xFFE60016 +#define CMDTYR 0xFFE60018 +#define RSPTYR 0xFFE60019 +#define TBNCR 0xFFE6001A +#define RSPR0 0xFFE60020 +#define RSPR1 0xFFE60021 +#define RSPR2 0xFFE60022 +#define RSPR3 0xFFE60023 +#define RSPR4 0xFFE60024 +#define RSPR5 0xFFE60025 +#define RSPR6 0xFFE60026 +#define RSPR7 0xFFE60027 +#define RSPR8 0xFFE60028 +#define RSPR9 0xFFE60029 +#define RSPR10 0xFFE6002A +#define RSPR11 0xFFE6002B +#define RSPR12 0xFFE6002C +#define RSPR13 0xFFE6002D +#define RSPR14 0xFFE6002E +#define RSPR15 0xFFE6002F +#define RSPR16 0xFFE60030 +#define RSPRD 0xFFE60031 +#define DTOUTR 0xFFE60032 +#define DR 0xFFE60040 +#define DMACR 0xFFE60044 +#define INTCR2 0xFFE60046 +#define INTSTR2 0xFFE60048 + +/* Audio Codec Interface */ +#define HACCR 0xFFE40008 +#define HACCSAR 0xFFE40020 +#define HACCSDR 0xFFE40024 +#define HACPCML 0xFFE40028 +#define HACPCMR 0xFFE4002C +#define HACTIER 0xFFE40050 +#define HACTSR 0xFFE40054 +#define HACRIER 0xFFE40058 +#define HACRSR 0xFFE4005C +#define HACACR 0xFFE40060 + +/* Serial Sound Interface */ +#define SSICR 0xFFE70000 +#define SSISR 0xFFE70004 +#define SSITDR 0xFFE70008 +#define SSIRDR 0xFFE7000C + +/* Flash memory Controller */ +#define FLCMNCR 0xFFE90000 +#define FLCMDCR 0xFFE90004 +#define FLCMCDR 0xFFE90008 +#define FLADR 0xFFE9000C +#define FLDATAR 0xFFE90010 +#define FLDTCNTR 0xFFE90014 +#define FLINTDMACR 0xFFE90018 +#define FLBSYTMR 0xFFE9001C +#define FLBSYCNT 0xFFE90020 +#define FLTRCR 0xFFE9002C + +/* General Purpose I/O */ +#define PACR 0xFFEA0000 +#define PBCR 0xFFEA0002 +#define PCCR 0xFFEA0004 +#define PDCR 0xFFEA0006 +#define PECR 0xFFEA0008 +#define PFCR 0xFFEA000A +#define PGCR 0xFFEA000C +#define PHCR 0xFFEA000E +#define PJCR 0xFFEA0010 +#define PKCR 0xFFEA0012 +#define PLCR 0xFFEA0014 +#define PMCR 0xFFEA0016 +#define PADR 0xFFEA0020 +#define PBDR 0xFFEA0022 +#define PCDR 0xFFEA0024 +#define PDDR 0xFFEA0026 +#define PEDR 0xFFEA0028 +#define PFDR 0xFFEA002A +#define PGDR 0xFFEA002C +#define PHDR 0xFFEA002E +#define PJDR 0xFFEA0030 +#define PKDR 0xFFEA0032 +#define PLDR 0xFFEA0034 +#define PMDR 0xFFEA0036 +#define PEPUPR 0xFFEA0048 +#define PHPUPR 0xFFEA004E +#define PJPUPR 0xFFEA0050 +#define PKPUPR 0xFFEA0052 +#define PMPUPR 0xFFEA0056 +#define PPUPR1 0xFFEA0060 +#define PPUPR2 0xFFEA0062 +#define PMSELR 0xFFEA0080 + +/* User Break Controller */ +#define CBR0 0xFF200000 +#define CRR0 0xFF200004 +#define CAR0 0xFF200008 +#define CAMR0 0xFF20000C +#define CBR1 0xFF200020 +#define CRR1 0xFF200024 +#define CAR1 0xFF200028 +#define CAMR1 0xFF20002C +#define CDR1 0xFF200030 +#define CDMR1 0xFF200034 +#define CETR1 0xFF200038 +#define CCMFR 0xFF200600 +#define CBCR 0xFF200620 + +#endif /* _ASM_CPU_SH7780_H_ */ diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h new file mode 100644 index 0000000..bc59491 --- /dev/null +++ b/include/asm-sh/pci.h @@ -0,0 +1,47 @@ +/* + * SH4 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * u-boot/include/asm-sh/pci.h + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _ASM_PCI_H_ +#define _ASM_PCI_H_ + +#include <pci.h> +#if defined(CONFIG_SH7751_PCI) +int pci_sh7751_init(struct pci_controller *hose); +#elif defined(CONFIG_SH7780_PCI) +int pci_sh7780_init(struct pci_controller *hose); +#else +#error "Not support PCI." +#endif + +/* PCI dword read for sh4 */ +int pci_sh4_read_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 *value); + +/* PCI dword write for sh4 */ +int pci_sh4_write_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 value); + +#endif /* _ASM_PCI_H_ */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index bb9a35f..388aa69 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -2,7 +2,8 @@ #define _ASM_SH_PROCESSOR_H_ #if defined CONFIG_SH3 # include <asm/cpu_sh3.h> -#elif defined (CONFIG_SH4) +#elif defined (CONFIG_SH4) || \ + defined (CONFIG_SH4A) # include <asm/cpu_sh4.h> #endif #endif diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 4fb6921..d54da97 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -157,10 +157,9 @@ */ #define CFG_MBYTES_SDRAM (1024) /* 512 MiB TODO: remove */ #define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ +#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ + /* 440EPx errata CHIP 11 */ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ -#if 0 -#define CONFIG_ZERO_SDRAM /* Zero SDRAM after setup */ -#endif #define CONFIG_DDR_ECC /* Use ECC when available */ #define SPD_EEPROM_ADDRESS {0x50} #define CONFIG_PROG_SDRAM_TLB @@ -244,9 +243,6 @@ "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \ "cp.b 100000 FFFA0000 60000\0" \ "" -#if 0 -#define CONFIG_BOOTCOMMAND "run flash_self" -#endif #define CONFIG_PREBOOT /* enable preboot variable */ @@ -264,7 +260,7 @@ int du440_phy_addr(int devnum); #define CONFIG_PHY_ADDR du440_phy_addr(0) /* PHY address */ #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_PHY_GIGE 1 /* Include GbE detection */ +#undef CONFIG_PHY_GIGE /* no GbE detection */ #define CONFIG_HAS_ETH0 #define CFG_RX_ETH_BUFFER 128 @@ -295,7 +291,9 @@ int du440_phy_addr(int devnum); #include <config_cmd_default.h> +#define CONFIG_CMD_AUTOSCRIPT #define CONFIG_CMD_BSP +#define CONFIG_CMD_BMP #define CONFIG_CMD_DATE #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP @@ -431,8 +429,6 @@ int du440_phy_addr(int devnum); #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif -#if 0 -#define CONFIG_SHOW_ACTIVITY 1 -#endif +#define CONFIG_AUTOSCRIPT 1 #endif /* __CONFIG_H */ diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index a3d7bc4..3d28913 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -86,6 +86,7 @@ "save\0" \ "" +#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ /* LCD */ #ifdef CONFIG_CMD_BMP #define CONFIG_LCD diff --git a/include/configs/r5200.h b/include/configs/M5275EVB.h index fc7658b..599f8dc 100644 --- a/include/configs/r5200.h +++ b/include/configs/M5275EVB.h @@ -1,9 +1,11 @@ /* - * Configuation settings for the R5200 board + * Configuation settings for the Motorola MC5275EVB board. * - * (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com> - * Based on Motorola MC5272C3 board config - * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> + * By Arthur Shipkowski <art@videon-central.com> + * Copyright (C) 2005 Videon Central, Inc. + * + * Based off of M5272C3 board code by Josef Baumgartner + * <josef.baumgartner@telex.de> * * See file CREDITS for list of people who contributed to this * project. @@ -28,42 +30,38 @@ * board/config.h - configuration options, board specific */ -#ifndef _R5200_H -#define _R5200_H +#ifndef _M5275EVB_H +#define _M5275EVB_H /* * High Level Configuration Options * (easy to change) */ #define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5271 /* define processor type */ -#define CONFIG_R5200 /* define board type */ +#define CONFIG_M5275 /* define processor type */ +#define CONFIG_M5275EVB /* define board type */ #define CONFIG_MCFTMR #define CONFIG_MCFUART #define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 -#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } - -#define CONFIG_WATCHDOG -#define CONFIG_WATCHDOG_TIMEOUT 0xFFFF /* clock modulus */ +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ #ifndef CONFIG_MONITOR_IS_IN_RAM -#define CFG_ENV_OFFSET 0x20000 -#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_IS_EMBEDDED 1 #else -#define CFG_ENV_ADDR 0xf0020000 +#define CFG_ENV_ADDR 0xffe04000 #define CFG_ENV_SECT_SIZE 0x2000 #define CFG_ENV_IS_IN_FLASH 1 #endif - /* * BOOTP options */ @@ -72,64 +70,80 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ +/* Available command configuration */ #include <config_cmd_default.h> #define CONFIG_CMD_PING +#define CONFIG_CMD_MII #define CONFIG_CMD_NET +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_DHCP #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_LOADB #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC -# define CONFIG_NET_MULTI 1 -# define CONFIG_MII 1 -# define CFG_DISCOVER_PHY -# define CFG_RX_ETH_BUFFER 8 -# define CFG_FAULT_ECHO_LINK_DOWN - -# define CFG_FEC0_PINMUX 0 -# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE -# define MCFFEC_TOUT_LOOP 50000 +#define CONFIG_NET_MULTI 1 +#define CONFIG_MII 1 +#define CFG_DISCOVER_PHY +#define CFG_RX_ETH_BUFFER 8 +#define CFG_FAULT_ECHO_LINK_DOWN +#define CFG_FEC0_PINMUX 0 +#define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +#define CFG_FEC1_PINMUX 0 +#define CFG_FEC1_MIIBASE CFG_FEC1_IOBASE +#define MCFFEC_TOUT_LOOP 50000 +#define CONFIG_HAS_ETH1 /* If CFG_DISCOVER_PHY is not defined - hardcoded */ -# ifndef CFG_DISCOVER_PHY -# define FECDUPLEX FULL -# define FECSPEED _100BASET -# else -# ifndef CFG_FAULT_ECHO_LINK_DOWN -# define CFG_FAULT_ECHO_LINK_DOWN -# endif -# endif /* CFG_DISCOVER_PHY */ +#ifndef CFG_DISCOVER_PHY +#define FECDUPLEX FULL +#define FECSPEED _100BASET +#else +#ifndef CFG_FAULT_ECHO_LINK_DOWN +#define CFG_FAULT_ECHO_LINK_DOWN +#endif +#endif #endif -/* Note: We only copy one sectors worth of application code from location - * 10200000 for speed purposes. Increase the size if necessary */ -#define CONFIG_BOOTCOMMAND "cp.b 10200000 0 20000; go 400" -#define CONFIG_BOOTDELAY 1 +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C +#define CFG_I2C_SPEED 80000 +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x00000300 +#define CFG_IMMR CFG_MBAR -#define CFG_PROMPT "u-boot> " -#define CFG_LONGHELP /* undef to save memory */ +#ifdef CONFIG_MCFFEC +#define CONFIG_ETHADDR 00:06:3b:01:41:55 +#define CONFIG_ETH1ADDR 00:0e:0c:bc:e5:60 +#endif -#if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PROMPT "-> " +#define CFG_LONGHELP /* undef to save memory */ + +#if (CONFIG_CMD_KGDB) +# define CFG_CBSIZE 1024 #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +# define CFG_CBSIZE 256 #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE CFG_CBSIZE -#define CFG_LOAD_ADDR 0x00002000 +#define CFG_LOAD_ADDR 0x800000 +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOTCOMMAND "bootm ffe40000" #define CFG_MEMTEST_START 0x400 #define CFG_MEMTEST_END 0x380000 -#define CFG_HZ 1000000 -#define CFG_CLK 100000000 +#define CFG_HZ 1000 +#define CFG_CLK 150000000 /* * Low Level Configuration Settings @@ -137,16 +151,14 @@ * You should know what you are doing if you make changes here. */ -#define CFG_MBAR 0x40000000 /* Register Base Addrs */ - -#define CFG_ENET_BD_BASE 0x480000 +#define CFG_MBAR 0x40000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ #define CFG_INIT_RAM_ADDR 0x20000000 -#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 1000 /* bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET @@ -156,16 +168,16 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */ -#define CFG_FLASH_BASE 0x10000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_FLASH_BASE 0xffe00000 -#ifdef CONFIG_MONITOR_IS_IN_RAM +#ifdef CONFIG_MONITOR_IS_IN_RAM #define CFG_MONITOR_BASE 0x20000 #else #define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) #endif -#define CFG_MONITOR_LEN 0x20001 +#define CFG_MONITOR_LEN 0x20000 #define CFG_MALLOC_LEN (256 << 10) #define CFG_BOOTPARAMS_LEN 64*1024 @@ -174,18 +186,18 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial mmap for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 1024 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 1000 #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1 -#define CFG_FLASH_SIZE 0x800000 +#define CFG_FLASH_SIZE 0x200000 /*----------------------------------------------------------------------- * Cache Configuration @@ -195,10 +207,17 @@ /*----------------------------------------------------------------------- * Memory bank definitions */ +#define CFG_AR0_PRELIM (CFG_FLASH_BASE >> 16) +#define CFG_CR0_PRELIM 0x1980 +#define CFG_MR0_PRELIM 0x001F0001 + +#define CFG_AR1_PRELIM 0x3000 +#define CFG_CR1_PRELIM 0x1900 +#define CFG_MR1_PRELIM 0x00070001 /*----------------------------------------------------------------------- * Port configuration */ -#define CFG_FECI2C 0xF0 +#define CFG_FECI2C 0x0FA0 -#endif /* _R5200_H */ +#endif /* _M5275EVB_H */ diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 5f55761..f33ccb0 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -171,6 +171,10 @@ #define CFG_I2C_OFFSET 0x58000 #define CFG_IMMR CFG_MBAR +/* DSPI and Serial Flash */ +#define CONFIG_CF_DSPI +#define CONFIG_SERIAL_FLASH + /* PCI */ #ifdef CONFIG_CMD_PCI #define CONFIG_PCI 1 @@ -309,7 +313,7 @@ #else -# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +# define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */ # define CFG_ATMEL_REGION 4 # define CFG_ATMEL_TOTALSECT 11 @@ -326,6 +330,28 @@ # define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ # define CFG_FLASH_CHECKSUM +#ifdef CONFIG_SERIAL_FLASH +# define CFG_FLASH2_BASE 0x01000000 +# define CFG_STM_SECT 32 +# define CFG_STM_SECTSZ 0x10000 + +# undef CFG_FLASH_ERASE_TOUT +# define CFG_FLASH_ERASE_TOUT 20000 + +# define SER_WREN 0x06 +# define SER_WRDI 0x04 +# define SER_RDID 0x9F +# define SER_RDSR 0x05 +# define SER_WRSR 0x01 +# define SER_READ 0x03 +# define SER_F_READ 0x0B +# define SER_PAGE_PROG 0x02 +# define SER_SECT_ERASE 0xD8 +# define SER_BULK_ERASE 0xC7 +# define SER_DEEP_PWRDN 0xB9 +# define SER_RES 0xAB +#endif + #endif /* diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index af78726..432fb31 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -349,6 +349,29 @@ #define CONFIG_ETHPRIME "eTSEC1" /* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CFG_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CFG_SATA1_OFFSET 0x18000 +#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET) +#define CFG_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CFG_SATA2_OFFSET 0x19000 +#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET) +#define CFG_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* * Environment */ #ifndef CFG_RAMBOOT diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 94c4c6b..92d7aa4 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -323,8 +323,11 @@ /* * Config on-board EEPROM */ -#define CFG_I2C_EEPROM_ADDR 0x50 -#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_PAGE_WRITE_BITS 6 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CFG_EEPROM_PAGE_WRITE_ENABLE /* * General PCI @@ -341,7 +344,7 @@ #define CFG_PCI1_IO_SIZE 0x04000000 /* 64M */ #ifdef CONFIG_PCI - +#define CONFIG_PCI_SKIP_HOST_BRIDGE #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ @@ -549,6 +552,9 @@ #define CONFIG_HAS_ETH1 /* add support for "eth1addr" */ #define CONFIG_ETH1ADDR 00:04:9f:ef:03:02 +/* use mac_read_from_eeprom() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */ +#define CFG_I2C_MAC_OFFSET 0x7f00 /* MAC address offset in I2C EEPROM */ + #define CONFIG_IPADDR 10.0.0.2 #define CONFIG_SERVERIP 10.0.0.1 #define CONFIG_GATEWAYIP 10.0.0.1 diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index b307bf7..7c4e76e 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -389,6 +389,34 @@ /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "eTSEC1" +/* SERDES */ +#define CONFIG_FSL_SERDES +#define CONFIG_FSL_SERDES1 0xe3000 +#define CONFIG_FSL_SERDES2 0xe3100 + +/* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CFG_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CFG_SATA1_OFFSET 0x18000 +#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET) +#define CFG_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CFG_SATA2_OFFSET 0x19000 +#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET) +#define CFG_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + /* * Environment */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 90812e9..eaac525 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -416,6 +416,29 @@ #endif /* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CFG_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CFG_SATA1_OFFSET 0x18000 +#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET) +#define CFG_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CFG_SATA2_OFFSET 0x19000 +#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET) +#define CFG_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* * Environment */ #ifndef CFG_RAMBOOT diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h new file mode 100644 index 0000000..99e1179 --- /dev/null +++ b/include/configs/MigoR.h @@ -0,0 +1,151 @@ +/* + * Configuation settings for the Renesas Solutions Migo-R board + * + * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MIGO_R_H +#define __MIGO_R_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH4 1 +#define CONFIG_CPU_SH7722 1 +#define CONFIG_MIGO_R 1 + +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_NFS +#define CONFIG_CMD_DFL +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_ENV + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.10.100 +#define CONFIG_SERVERIP 192.168.10.77 +#define CONFIG_GATEWAYIP 192.168.10.77 + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +/* SMC9111 */ +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE (0xB0000000) + +/* MEMORY */ +#define MIGO_R_SDRAM_BASE (0x8C000000) +#define MIGO_R_FLASH_BASE_1 (0xA0000000) +#define MIGO_R_FLASH_BANK_SIZE (64 * 1024 * 1024) + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Buffer size for input from the Console */ +#define CFG_PBSIZE 256 /* Buffer size for Console output */ +#define CFG_MAXARGS 16 /* max args accepted for monitor commands */ +#define CFG_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */ +#define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ + +/* SCIF */ +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_CONS_SCIF0 1 +#undef CFG_CONSOLE_INFO_QUIET /* Suppress display of console + information at boot */ +#undef CFG_CONSOLE_OVERWRITE_ROUTINE +#undef CFG_CONSOLE_ENV_OVERWRITE + +#define CFG_MEMTEST_START (MIGO_R_SDRAM_BASE) +#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024)) + +/* Enable alternate, more extensive, memory test */ +#undef CFG_ALT_MEMTEST +/* Scratch address used by the alternate memory test */ +#undef CFG_MEMTEST_SCRATCH + +/* Enable temporary baudrate change while serial download */ +#undef CFG_LOADS_BAUD_CHANGE + +#define CFG_SDRAM_BASE (MIGO_R_SDRAM_BASE) +/* maybe more, but if so u-boot doesn't know about it... */ +#define CFG_SDRAM_SIZE (64 * 1024 * 1024) +/* default load address for scripts ?!? */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 16 * 1024 * 1024) + +/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ +#define CFG_MONITOR_BASE (MIGO_R_FLASH_BASE_1) +/* Monitor size */ +#define CFG_MONITOR_LEN (128 * 1024) +/* Size of DRAM reserved for malloc() use */ +#define CFG_MALLOC_LEN (256 * 1024) +/* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_SIZE (256) +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) + +/* FLASH */ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#undef CFG_FLASH_QUIET_TEST +/* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_EMPTY_INFO +/* Physical start address of Flash memory */ +#define CFG_FLASH_BASE (MIGO_R_FLASH_BASE_1) +/* Max number of sectors on each Flash chip */ +#define CFG_MAX_FLASH_SECT 512 + +/* if you use all NOR Flash , you change dip-switch. Please see MIGO_R01 Manual. */ +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + (0 * MIGO_R_FLASH_BANK_SIZE) } + +/* Timeout for Flash erase operations (in ms) */ +#define CFG_FLASH_ERASE_TOUT (3 * 1000) +/* Timeout for Flash write operations (in ms) */ +#define CFG_FLASH_WRITE_TOUT (3 * 1000) +/* Timeout for Flash set sector lock bit operations (in ms) */ +#define CFG_FLASH_LOCK_TOUT (3 * 1000) +/* Timeout for Flash clear lock bit operations (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT (3 * 1000) + +/* Use hardware flash sectors protection instead of U-Boot software protection */ +#undef CFG_FLASH_PROTECTION +#undef CFG_DIRECT_FLASH_TFTP + +/* ENV setting */ +#define CFG_ENV_IS_IN_FLASH +#define CONFIG_ENV_OVERWRITE 1 +#define CFG_ENV_SECT_SIZE (128 * 1024) +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +/* Offset of env Flash sector relative to CFG_FLASH_BASE */ +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE) + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 33333333 +#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +#endif /* __MIGO_R_H */ diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 38fb7c6..3e906c4 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2006-2007 + * (C) Copyright 2006-2008 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -35,6 +35,7 @@ #define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ +#define CONFIG_4xx_DCACHE /* Enable i- and d-cache */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -144,6 +145,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth3\0" \ "hostname=alpr\0" \ + "fdt_file=alpr/alpr.dtb\0" \ + "fdt_addr=400000\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath} ${init}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -158,6 +161,10 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ "bootm\0" \ + "net_nfs_fdt=tftp 200000 ${bootfile};" \ + "tftp ${fdt_addr} ${fdt_file};" \ + "run nfsargs addip addtty;" \ + "bootm 200000 - ${fdt_addr}\0" \ "rootpath=/opt/projects/alpr/nfs_root\0" \ "bootfile=/alpr/uImage\0" \ "kernel_addr=fff00000\0" \ @@ -370,4 +377,9 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index f0dfd71..dab21d0 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Stelian Pop <stelian.pop <at> leadtechdesign.com> * Lead Tech Design <www.leadtechdesign.com> * @@ -28,8 +28,8 @@ #define __CONFIG_H /* ARM asynchronous clock */ -#define AT91C_MAIN_CLOCK 200000000 /* from 12 MHz crystal */ -#define AT91C_MASTER_CLOCK 100000000 /* peripheral = main / 2 */ +#define AT91_MAIN_CLOCK 200000000 /* from 12 MHz crystal */ +#define AT91_MASTER_CLOCK 100000000 /* peripheral = main / 2 */ #define CFG_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ @@ -46,19 +46,9 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SKIP_RELOCATE_UBOOT -#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) -/* - * Size of malloc() pool - */ -#define CFG_MALLOC_LEN ROUND(CFG_ENV_SIZE + 128*1024, 0x1000) -#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ - -#define CONFIG_BAUDRATE 115200 - /* * Hardware drivers */ - #define CONFIG_ATMEL_USART 1 #undef CONFIG_USART0 #undef CONFIG_USART1 @@ -104,7 +94,9 @@ #define CFG_SPI_WRITE_TOUT (5*CFG_HZ) #define CFG_MAX_DATAFLASH_BANKS 1 #define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -#define CONFIG_NEW_PARTITION 1 +#define AT91_SPI_CLK 20000000 +#define DATAFLASH_TCSS (0xFA << 16) +#define DATAFLASH_TCHS (0x8 << 24) /* NOR flash */ #define CFG_FLASH_CFI 1 @@ -114,39 +106,11 @@ #define CFG_MAX_FLASH_SECT 256 #define CFG_MAX_FLASH_BANKS 1 -#define AT91C_FLASH_NWE_SETUP (4 << 0) -#define AT91C_FLASH_NCS_WR_SETUP (2 << 8) -#define AT91C_FLASH_NRD_SETUP (4 << 16) -#define AT91C_FLASH_NCS_RD_SETUP (2 << 24) - -#define AT91C_FLASH_NWE_PULSE (8 << 0) -#define AT91C_FLASH_NCS_WR_PULSE (10 << 8) -#define AT91C_FLASH_NRD_PULSE (8 << 16) -#define AT91C_FLASH_NCS_RD_PULSE (10 << 24) - -#define AT91C_FLASH_NWE_CYCLE (16 << 0) -#define AT91C_FLASH_NRD_CYCLE (16 << 16) - /* NAND flash */ #define NAND_MAX_CHIPS 1 #define CFG_MAX_NAND_DEVICE 1 #define CFG_NAND_BASE 0x40000000 -#define AT91C_SM_NWE_SETUP (2 << 0) -#define AT91C_SM_NCS_WR_SETUP (1 << 8) -#define AT91C_SM_NRD_SETUP (2 << 16) -#define AT91C_SM_NCS_RD_SETUP (1 << 24) - -#define AT91C_SM_NWE_PULSE (4 << 0) -#define AT91C_SM_NCS_WR_PULSE (6 << 8) -#define AT91C_SM_NRD_PULSE (4 << 16) -#define AT91C_SM_NCS_RD_PULSE (6 << 24) - -#define AT91C_SM_NWE_CYCLE (8 << 0) -#define AT91C_SM_NRD_CYCLE (8 << 16) - -#define AT91C_SM_TDF (1 << 16) - /* Ethernet */ #define CONFIG_MACB 1 #define CONFIG_RMII 1 @@ -159,15 +123,14 @@ #define LITTLEENDIAN 1 #define CONFIG_DOS_PARTITION 1 #define CFG_USB_OHCI_CPU_INIT 1 -#define CFG_USB_OHCI_REGS_BASE 0x00700000 /* AT91C_BASE_UHP */ +#define CFG_USB_OHCI_REGS_BASE 0x00700000 /* AT91_BASE_UHP */ #define CFG_USB_OHCI_SLOT_NAME "at91cap9" #define CFG_USB_OHCI_MAX_ROOT_PORTS 2 - #define CFG_LOAD_ADDR 0x72000000 /* load address */ #define CFG_MEMTEST_START PHYS_SDRAM -#define CFG_MEMTEST_END 0x73000000 +#define CFG_MEMTEST_END 0x73e00000 #define CFG_USE_DATAFLASH 1 #undef CFG_USE_NORFLASH @@ -194,6 +157,7 @@ #endif +#define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CFG_PROMPT "U-Boot> " @@ -203,6 +167,13 @@ #define CFG_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN ROUND(CFG_ENV_SIZE + 128*1024, 0x1000) +#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + #define CONFIG_STACKSIZE (32*1024) /* regular stack */ #ifdef CONFIG_USE_IRQ diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 5b7212a..951ce16 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -51,7 +51,7 @@ #define MC_ASR_VAL 0x00000000 #define MC_AASR_VAL 0x00000000 #define EBI_CFGR_VAL 0x00000000 -#define SMC2_CSR_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ +#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ /* clocks */ #define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h new file mode 100644 index 0000000..96d1b8d --- /dev/null +++ b/include/configs/at91sam9260ek.h @@ -0,0 +1,191 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop <at> leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * Configuation settings for the AT91SAM9260EK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91_MAIN_CLOCK 198656000 /* from 18.432 MHz crystal */ +#define AT91_MASTER_CLOCK 99328000 /* peripheral = main / 2 */ +#define CFG_HZ 1000000 /* 1us resolution */ + +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#define CONFIG_AT91SAM9260 1 /* It's an Atmel AT91SAM9260 SoC*/ +#define CONFIG_AT91SAM9260EK 1 /* on an AT91SAM9260EK Board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock0 rw rootfstype=jffs2" + +/* #define CONFIG_ENV_OVERWRITE 1 */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ + +/* DataFlash */ +#define CONFIG_HAS_DATAFLASH 1 +#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) +#define CFG_MAX_DATAFLASH_BANKS 2 +#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ +#define CFG_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ +#define AT91_SPI_CLK 33000000 +#define DATAFLASH_TCSS (0x1a << 16) +#define DATAFLASH_TCHS (0x1 << 24) + +/* NAND flash */ +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 +#define CFG_NAND_BASE 0x40000000 + +/* NOR flash - no real flash on this board */ +#define CFG_NO_FLASH 1 + +/* Ethernet */ +#define CONFIG_MACB 1 +#define CONFIG_RMII 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R 1 + +/* USB */ +#define CONFIG_USB_OHCI_NEW 1 +#define LITTLEENDIAN 1 +#define CONFIG_DOS_PARTITION 1 +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ +#define CFG_USB_OHCI_SLOT_NAME "at91sam9260" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 + +#define CFG_LOAD_ADDR 0x22000000 /* load address */ + +#define CFG_MEMTEST_START PHYS_SDRAM +#define CFG_MEMTEST_END 0x23e00000 + +#undef CFG_USE_DATAFLASH_CS0 +#define CFG_USE_DATAFLASH_CS1 1 +#undef CFG_USE_NANDFLASH + +#ifdef CFG_USE_DATAFLASH_CS0 + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CFG_ENV_IS_IN_DATAFLASH 1 +#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) +#define CFG_ENV_OFFSET 0x4200 +#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x4200 +#define CONFIG_BOOTCOMMAND "cp.b 0xC003DE00 0x22000000 0x200040; bootm" + +#elif CFG_USE_DATAFLASH_CS1 + +/* bootstrap + u-boot + env + linux in dataflash on CS1 */ +#define CFG_ENV_IS_IN_DATAFLASH 1 +#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) +#define CFG_ENV_OFFSET 0x4200 +#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS1 + CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x4200 +#define CONFIG_BOOTCOMMAND "cp.b 0xD003DE00 0x22000000 0x200040; bootm" + +#else /* CFG_USE_NANDFLASH */ + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_OFFSET 0x60000 +#define CFG_ENV_OFFSET_REDUND 0x80000 +#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" + +#endif + +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CFG_PROMPT "U-Boot> " +#define CFG_CBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000) +#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index f2c8703..2f551ad 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -8,7 +8,6 @@ #include <asm/blackfin-config-pre.h> #define CONFIG_BAUDRATE 57600 -#define CONFIG_STAMP 1 #define CONFIG_BOOTDELAY 5 #define CFG_AUTOLOAD "no" /*rarpb, bootp or dhcp commands will perform only a */ @@ -30,28 +29,15 @@ #define CONFIG_RTC_BFIN 1 #define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ -/* - * Boot Mode Set - * Blackfin can support several boot modes - */ -#define BF533_BYPASS_BOOT 0x0001 /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */ -#define BF533_PARA_BOOT 0x0002 /* Bootmode 1: Boot from 8-bit or 16-bit flash */ -#define BF533_SPI_BOOT 0x0004 /* Bootmode 3: Boot from SPI flash */ -/* Define the boot mode */ -#define BFIN_BOOT_MODE BF533_BYPASS_BOOT -/* #define BFIN_BOOT_MODE BF533_SPI_BOOT */ - #define CONFIG_PANIC_HANG 1 #define CONFIG_BFIN_CPU bf533-0.3 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS /* This sets the default state of the cache on U-Boot's boot */ #define CONFIG_ICACHE_ON #define CONFIG_DCACHE_ON -/* Define where the uboot will be loaded by on-chip boot rom */ -#define APP_ENTRY 0x00001000 - /* CONFIG_CLKIN_HZ is any value in Hz */ #define CONFIG_CLKIN_HZ 27000000 /* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ @@ -216,24 +202,14 @@ #define CFG_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ -/* 0xFF, 0x7BB07BB0, 0x22547BB0 */ -/* #define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) -#define AMBCTL0VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \ - ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN) -#define AMBCTL1VAL (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \ - B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN) -*/ -#define AMGCTLVAL 0xFF -#define AMBCTL0VAL 0x7BB07BB0 -#define AMBCTL1VAL 0xFFC27BB0 - -#define CONFIG_VDSP 1 - -#ifdef CONFIG_VDSP -#define ET_EXEC_VDSP 0x8 -#define SHT_STRTAB_VDSP 0x1 -#define ELFSHDRSIZE_VDSP 0x2C -#define VDSP_ENTRY_ADDR 0xFFA00000 -#endif +#define CONFIG_EBIU_SDRRC_VAL 0x398 +#define CONFIG_EBIU_SDGCTL_VAL 0x91118d +#define CONFIG_EBIU_SDBCTL_VAL 0x13 + +#define CONFIG_EBIU_AMGCTL_VAL 0xFF +#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 +#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 + +#include <asm/blackfin-config-post.h> #endif diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 76dd2fa..66a0af6 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -7,37 +7,17 @@ #include <asm/blackfin-config-pre.h> -#define CONFIG_STAMP 1 #define CONFIG_RTC_BFIN 1 -#define CONFIG_BF533 1 -/* - * Boot Mode Set - * Blackfin can support several boot modes - */ -#define BF533_BYPASS_BOOT 0x0001 /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */ -#define BF533_PARA_BOOT 0x0002 /* Bootmode 1: Boot from 8-bit or 16-bit flash */ -#define BF533_SPI_BOOT 0x0004 /* Bootmode 3: Boot from SPI flash */ -/* Define the boot mode */ -#define BFIN_BOOT_MODE BF533_BYPASS_BOOT -/* #define BFIN_BOOT_MODE BF533_SPI_BOOT */ #define CONFIG_PANIC_HANG 1 #define CONFIG_BFIN_CPU bf533-0.3 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS /* This sets the default state of the cache on U-Boot's boot */ #define CONFIG_ICACHE_ON #define CONFIG_DCACHE_ON -/* Define where the uboot will be loaded by on-chip boot rom */ -#define APP_ENTRY 0x00001000 - -/* - * Stringize definitions - needed for environmental settings - */ -#define STRINGIZE2(x) #x -#define STRINGIZE(x) STRINGIZE2(x) - /* * Board settings */ @@ -61,8 +41,6 @@ */ #define CONFIG_VIDEO 0 -#define CONFIG_VDSP 1 - /* * Clock settings */ @@ -88,10 +66,7 @@ /* Values can range from 2-65535 */ /* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ #define CONFIG_SPI_BAUD 2 - -#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) #define CONFIG_SPI_BAUD_INITBLOCK 4 -#endif /* * Network settings @@ -126,14 +101,14 @@ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR 0x20004000 -#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) -#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) #define CFG_ENV_IS_IN_EEPROM 1 #define CFG_ENV_OFFSET 0x4000 #define CFG_ENV_HEADER (CFG_ENV_OFFSET + 0x12A) /* 0x12A is the length of LDR file header */ +#else +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0x20004000 +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) #endif #define CFG_ENV_SIZE 0x2000 @@ -165,11 +140,7 @@ #define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */ #define CONFIG_MEM_MT48LC64M4A2FB_7E 1 -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) #define CFG_MEMTEST_START 0x00000000 /* memtest works on */ -#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#endif #define CFG_SDRAM_BASE 0x00000000 @@ -207,14 +178,6 @@ #define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ #endif -#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) -#if (CONFIG_SCLK_HZ / (2*CONFIG_SPI_BAUD) > 20000000) -#define CONFIG_SPI_FLASH_FAST_READ 1 /* Needed if SPI_CLK > 20 MHz */ -#else -#undef CONFIG_SPI_FLASH_FAST_READ -#endif -#endif - /* * Command settings */ @@ -222,26 +185,18 @@ #define CFG_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) #define CFG_AUTOLOAD "no" /*rarpb, bootp or dhcp commands will perform only a */ -#endif /* configuration lookup from the BOOTP/DHCP server, */ /* but not try to load any image using TFTP */ #define CONFIG_BOOTDELAY 5 #define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) #define CONFIG_BOOTCOMMAND "run ramboot" -#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) -#define CONFIG_BOOTCOMMAND "eeprom read 0x1000000 0x100000 0x180000;icache on;dcache on;bootm 0x1000000" -#endif #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) -#if (CONFIG_DRIVER_SMC91111) #define CONFIG_EXTRA_ENV_SETTINGS \ "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ @@ -257,29 +212,6 @@ "protect off 0x20000000 0x2003FFFF; erase 0x20000000 0x2003FFFF;" \ "cp.b $(loadaddr) 0x20000000 $(filesize)\0" \ "" -#else -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ - "flashboot=bootm 0x20100000\0" \ - " -#endif - -#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ - "$(rootpath) console=ttyBF0,57600\0" \ - "addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \ - "$(gatewayip):$(netmask):$(hostname):eth0:off\0" \ - "ramboot=tftpboot $(loadaddr) linux; " \ - "run ramargs;run addip;bootelf\0" \ - "nfsboot=tftpboot $(loadaddr) linux; " \ - "run nfsargs;run addip;bootelf\0" \ - "flashboot=bootm 0x20100000\0" \ - "update=tftpboot $(loadaddr) u-boot.ldr;" \ - "eeprom write $(loadaddr) 0x0 $(filesize);\0"\ - "" -#endif #ifdef CONFIG_SOFT_I2C #if (!CONFIG_SOFT_I2C) @@ -316,9 +248,7 @@ #define CONFIG_CMD_I2C #endif -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) #define CONFIG_CMD_DHCP -#endif /* @@ -428,25 +358,16 @@ /* * FLASH organization and environment definitions */ -#define CFG_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */ - -/* 0xFF, 0xBBC3BBc3, 0x99B39983 */ -/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) -#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \ - B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN) -#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \ - B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN) -*/ -#define AMGCTLVAL 0xFF -#define AMBCTL0VAL 0xBBC3BBC3 -#define AMBCTL1VAL 0x99B39983 -#define CF_AMBCTL1VAL 0x99B3ffc2 - -#ifdef CONFIG_VDSP -#define ET_EXEC_VDSP 0x8 -#define SHT_STRTAB_VDSP 0x1 -#define ELFSHDRSIZE_VDSP 0x2C -#define VDSP_ENTRY_ADDR 0xFFA00000 -#endif + +#define CONFIG_EBIU_SDRRC_VAL 0x268 +#define CONFIG_EBIU_SDGCTL_VAL 0x911109 +#define CONFIG_EBIU_SDBCTL_VAL 0x37 + +#define CONFIG_EBIU_AMGCTL_VAL 0xFF +#define CONFIG_EBIU_AMBCTL0_VAL 0xBBC3BBC3 +#define CONFIG_EBIU_AMBCTL1_VAL 0x99B39983 +#define CF_CONFIG_EBIU_AMBCTL1_VAL 0x99B3ffc2 + +#include <asm/blackfin-config-post.h> #endif diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 0e189d4..39c7359 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -12,28 +12,15 @@ #define CONFIG_BAUDRATE 57600 /* Set default serial console for bf537 */ #define CONFIG_UART_CONSOLE 0 -#define CONFIG_BF537 1 #define CONFIG_BOOTDELAY 5 /* define CONFIG_BF537_STAMP_LEDCMD to enable LED command*/ /*#define CONFIG_BF537_STAMP_LEDCMD 1*/ -/* - * Boot Mode Set - * Blackfin can support several boot modes - */ -#define BF537_BYPASS_BOOT 0x0011 /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */ -#define BF537_PARA_BOOT 0x0012 /* Bootmode 1: Boot from 8-bit or 16-bit flash */ -#define BF537_SPI_MASTER_BOOT 0x0014 /* Bootmode 3: SPI master mode boot from SPI flash */ -#define BF537_SPI_SLAVE_BOOT 0x0015 /* Bootmode 4: SPI slave mode boot from SPI flash */ -#define BF537_TWI_MASTER_BOOT 0x0016 /* Bootmode 5: TWI master mode boot from EEPROM */ -#define BF537_TWI_SLAVE_BOOT 0x0017 /* Bootmode 6: TWI slave mode boot from EEPROM */ -#define BF537_UART_BOOT 0x0018 /* Bootmode 7: UART slave mdoe boot via UART host */ -/* Define the boot mode */ -#define BFIN_BOOT_MODE BF537_BYPASS_BOOT - #define CONFIG_PANIC_HANG 1 #define CONFIG_BFIN_CPU bf537-0.2 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS + #define CONFIG_BFIN_MAC /* This sets the default state of the cache on U-Boot's boot */ @@ -43,9 +30,6 @@ /* Define if want to do post memory test */ #undef CONFIG_POST_TEST -/* Define where the uboot will be loaded by on-chip boot rom */ -#define APP_ENTRY 0x00001000 - #define CONFIG_RTC_BFIN 1 #define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ @@ -70,9 +54,7 @@ /* Values can range from 2-65535 */ /* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ #define CONFIG_SPI_BAUD 2 -#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) #define CONFIG_SPI_BAUD_INITBLOCK 4 -#endif #if ( CONFIG_CLKIN_HALF == 0 ) #define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) @@ -88,14 +70,6 @@ #define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ #endif -#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) -#if (CONFIG_SCLK_HZ / (2*CONFIG_SPI_BAUD) > 20000000) -#define CONFIG_SPI_FLASH_FAST_READ 1 /* Needed if SPI_CLK > 20 MHz */ -#else -#undef CONFIG_SPI_FLASH_FAST_READ -#endif -#endif - #define CONFIG_MEM_SIZE 64 /* 128, 64, 32, 16 */ #define CONFIG_MEM_ADD_WDTH 10 /* 8, 9, 10, 11 */ #define CONFIG_MEM_MT48LC32M8A2_75 1 @@ -131,7 +105,7 @@ #define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ #define CONFIG_BOOTCOMMAND "run ramboot" -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) && defined(CONFIG_POST_TEST) +#if defined(CONFIG_POST_TEST) /* POST support */ #define CONFIG_POST ( CFG_POST_MEMORY | \ CFG_POST_UART | \ @@ -177,8 +151,6 @@ */ #include <config_cmd_default.h> -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) - #define CONFIG_CMD_ELF #define CONFIG_CMD_I2C #define CONFIG_CMD_CACHE @@ -198,10 +170,6 @@ #define CONFIG_CMD_IDE #endif -#endif - -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) - #define CONFIG_CMD_DHCP #if defined(CONFIG_POST) @@ -212,14 +180,10 @@ #define CONFIG_CMD_NAND #endif -#endif - #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" #define CONFIG_LOADADDR 0x1000000 -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) -#ifdef CONFIG_BFIN_MAC #define CONFIG_EXTRA_ENV_SETTINGS \ "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ @@ -236,36 +200,6 @@ "protect off 0x20000000 0x2007FFFF;" \ "erase 0x20000000 0x2007FFFF;cp.b 0x1000000 0x20000000 $(filesize)\0" \ "" -#else -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ - "flashboot=bootm 0x20100000\0" \ - "" -#endif -#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) -#ifdef CONFIG_BFIN_MAC -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath) console=ttyBF0,57600\0"\ - "addip=setenv bootargs $(bootargs) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ - ":$(hostname):eth0:off\0" \ - "ramboot=tftpboot $(loadaddr) linux;" \ - "run ramargs;run addip;bootelf\0" \ - "nfsboot=tftpboot $(loadaddr) linux;" \ - "run nfsargs;run addip;bootelf\0" \ - "flashboot=bootm 0x20100000\0" \ - "update=tftpboot $(loadaddr) u-boot.ldr;" \ - "eeprom write $(loadaddr) 0x0 $(filesize);\0" \ - "" -#else -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ - "flashboot=bootm 0x20100000\0" \ - "" -#endif -#endif #define CFG_PROMPT "bfin> " /* Monitor Command Prompt */ @@ -300,21 +234,18 @@ #define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) #define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_UART_BOOT) -/* for bf537-stamp, usrt boot mode still store env in flash */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR 0x20004000 -#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) -#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) #define CFG_ENV_IS_IN_EEPROM 1 #define CFG_ENV_OFFSET 0x4000 #define CFG_ENV_HEADER (CFG_ENV_OFFSET + 0x16e) /* 0x12A is the length of LDR file header */ +#else +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0x20004000 +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) #endif #define CFG_ENV_SIZE 0x2000 #define CFG_ENV_SECT_SIZE 0x2000 /* Total Size of Environment Sector */ -/* #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) */ #define ENV_IS_EMBEDDED -/* #endif */ /* JFFS Partition offset set */ #define CFG_JFFS2_FIRST_BANK 0 @@ -383,6 +314,14 @@ #define CONFIG_TWICLK_KHZ 50 #endif +#define CONFIG_EBIU_SDRRC_VAL 0x306 +#define CONFIG_EBIU_SDGCTL_VAL 0x91114d +#define CONFIG_EBIU_SDBCTL_VAL 0x25 + +#define CONFIG_EBIU_AMGCTL_VAL 0xFF +#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 +#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 + #if defined CONFIG_SOFT_I2C /* * Software (bit-bang) I2C driver configuration @@ -428,15 +367,6 @@ #define AMBCTL0VAL 0x7BB07BB0 #define AMBCTL1VAL 0xFFC27BB0 -#define CONFIG_VDSP 1 - -#ifdef CONFIG_VDSP -#define ET_EXEC_VDSP 0x8 -#define SHT_STRTAB_VDSP 0x1 -#define ELFSHDRSIZE_VDSP 0x2C -#define VDSP_ENTRY_ADDR 0xFFA00000 -#endif - #if defined(CONFIG_BFIN_IDE) #define CONFIG_DOS_PARTITION 1 @@ -492,4 +422,6 @@ #endif /*CONFIG_BFIN_IDE */ +#include <asm/blackfin-config-post.h> + #endif diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index c29555a..641548d 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -7,9 +7,6 @@ #include <asm/blackfin-config-pre.h> -#define CONFIG_VDSP 1 -#define CONFIG_BF561 1 - #define CFG_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_BAUDRATE 57600 @@ -21,30 +18,12 @@ #define CONFIG_PANIC_HANG 1 #define CONFIG_BFIN_CPU bf561-0.3 - -/* -* Boot Mode Set -* Blackfin can support several boot modes -*/ -#define BF561_BYPASS_BOOT 0x21 -#define BF561_PARA_BOOT 0x22 -#define BF561_SPI_BOOT 0x24 -/* Define the boot mode */ -#define BFIN_BOOT_MODE BF561_BYPASS_BOOT +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS /* This sets the default state of the cache on U-Boot's boot */ #define CONFIG_ICACHE_ON #define CONFIG_DCACHE_ON -/* Define where the uboot will be loaded by on-chip boot rom */ -#define APP_ENTRY 0x00001000 - -/* - * Stringize definitions - needed for environmental settings - */ -#define STRINGIZE2(x) #x -#define STRINGIZE(x) STRINGIZE2(x) - /* * Board settings */ @@ -242,17 +221,14 @@ /* * FLASH organization and environment definitions */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_EBIU_SDRRC_VAL 0x306 +#define CONFIG_EBIU_SDGCTL_VAL 0x91114d +#define CONFIG_EBIU_SDBCTL_VAL 0x15 -#define AMGCTLVAL 0x3F -#define AMBCTL0VAL 0x7BB07BB0 -#define AMBCTL1VAL 0xFFC27BB0 +#define CONFIG_EBIU_AMGCTL_VAL 0x3F +#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 +#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 -#ifdef CONFIG_VDSP -#define ET_EXEC_VDSP 0x8 -#define SHT_STRTAB_VDSP 0x1 -#define ELFSHDRSIZE_VDSP 0x2C -#define VDSP_ENTRY_ADDR 0xFFA00000 -#endif +#include <asm/blackfin-config-post.h> #endif /* __CONFIG_EZKIT561_H__ */ diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index a4bcc65..a1c6674 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -27,16 +27,21 @@ /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ -#define CONFIG_CANYONLANDS 1 /* Board is Canyonlands */ +/* This config file is used for Canyonlands (460EX) and Glacier (460GT) */ +#ifndef CONFIG_CANYONLANDS +#define CONFIG_460GT 1 /* Specific PPC460GT */ +#else +#define CONFIG_460EX 1 /* Specific PPC460EX */ +#endif #define CONFIG_440 1 #define CONFIG_4xx 1 /* ... PPC4xx family */ -#define CONFIG_460EX 1 /* Specific PPC460EX support */ #define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ +#define CONFIG_BOARD_TYPES 1 /* support board types */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -262,8 +267,15 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ #define CONFIG_PHY1_ADDR 1 -#define CONFIG_HAS_ETH0 1 -#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +/* Only Glacier (460GT) has 4 EMAC interfaces */ +#ifdef CONFIG_460GT +#define CONFIG_PHY2_ADDR 2 +#define CONFIG_PHY3_ADDR 3 +#define CONFIG_HAS_ETH2 +#define CONFIG_HAS_ETH3 +#endif #define CONFIG_NET_MULTI 1 #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ @@ -275,6 +287,8 @@ /*----------------------------------------------------------------------- * USB-OHCI *----------------------------------------------------------------------*/ +/* Only Canyonlands (460EX) has USB */ +#ifdef CONFIG_460EX #define CONFIG_USB_OHCI_NEW #define CONFIG_USB_STORAGE #undef CFG_OHCI_BE_CONTROLLER /* 460EX has little endian descriptors */ @@ -283,6 +297,7 @@ #define CFG_USB_OHCI_REGS_BASE (CFG_AHB_BASE | 0xd0000) #define CFG_USB_OHCI_SLOT_NAME "ppc440" #define CFG_USB_OHCI_MAX_ROOT_PORTS 15 +#endif /*----------------------------------------------------------------------- * Default environment @@ -293,9 +308,21 @@ #undef CONFIG_BOOTARGS +/* Setup some board specific values for the default environment variables */ +#ifdef CONFIG_CANYONLANDS +#define CONFIG_HOSTNAME canyonlands +#define CFG_BOOTFILE "bootfile=canyonlands/uImage\0" +#define CFG_DTBFILE "fdt_file=canyonlands/canyonlands.dtb\0" +#else +#define CONFIG_HOSTNAME glacier +#define CFG_BOOTFILE "bootfile=glacier/uImage\0" +#define CFG_DTBFILE "fdt_file=glacier/glacier.dtb\0" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ + CFG_BOOTFILE \ + CFG_DTBFILE \ "netdev=eth0\0" \ - "hostname=canyonlands\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -315,18 +342,16 @@ "flash_self=run ramargs addip addtty;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "rootpath=/opt/eldk/ppc_4xxFP\0" \ - "bootfile=canyonlands/uImage\0" \ - "fdt_file=canyonlands/canyonlands.dtb\0" \ "fdt_addr=400000\0" \ "kernel_addr=fc000000\0" \ "ramdisk_addr=fc200000\0" \ "initrd_high=30000000\0" \ - "load=tftp 200000 canyonlands/u-boot.bin\0" \ + "load=tftp 200000 ${hostname}/u-boot.bin\0" \ "update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;" \ "cp.b ${fileaddr} fffa0000 ${filesize};" \ "setenv filesize;saveenv\0" \ "upd=run load update\0" \ - "nload=tftp 200000 canyonlands/u-boot-nand.bin\0" \ + "nload=tftp 200000 ${hostname}/u-boot-nand.bin\0" \ "nupdate=nand erase 0 60000;nand write 200000 0 60000;" \ "setenv filesize;saveenv\0" \ "nupd=run nload nupdate\0" \ @@ -361,8 +386,6 @@ #define CONFIG_CMD_DIAG #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ #define CONFIG_CMD_MII @@ -373,7 +396,11 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SDRAM +#ifdef CONFIG_460EX +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT #define CONFIG_CMD_USB +#endif /* Partitions */ #define CONFIG_MAC_PARTITION @@ -487,6 +514,8 @@ /* * PPC4xx GPIO Configuration */ +#ifdef CONFIG_460EX +/* 460EX: Use USB configuration */ #define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ { \ /* GPIO Core 0 */ \ @@ -559,6 +588,81 @@ {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ } \ } +#else +/* 460GT: Use EMAC2+3 configuration */ +#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ +{ \ +/* GPIO Core 0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 GMC1TxD(0) USB2HostD(0) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 GMC1TxD(1) USB2HostD(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 GMC1TxD(2) USB2HostD(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 GMC1TxD(3) USB2HostD(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 GMC1TxD(4) USB2HostD(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 GMC1TxD(5) USB2HostD(5) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 GMC1TxD(6) USB2HostD(6) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 GMC1TxD(7) USB2HostD(7) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 GMC1RxD(0) USB2OTGD(0) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 GMC1RxD(1) USB2OTGD(1) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2) USB2OTGD(2) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3) USB2OTGD(3) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4) USB2OTGD(4) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5) USB2OTGD(5) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6) USB2OTGD(6) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7) USB2OTGD(7) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMC1TxER USB2HostStop */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD USB2HostNext */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER USB2HostDir */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMC1TxEN USB2OTGStop */ \ +{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS USB2OTGNext */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV USB2OTGDir */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0 DMAReq2 IRQ(7)*/ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1 DMAAck2 IRQ(8)*/ \ +}, \ +{ \ +/* GPIO Core 1 */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2 EOT2/TC2 IRQ(9)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3 DMAReq3 IRQ(4)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3 UART3_SIN*/ \ +{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EOT3/TC3 UART3_SOUT*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3) DMAReq1 IRQ(10)*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4) DMAAck1 IRQ(11)*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5) EOT/TC1 IRQ(12)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5) DMAReq0 IRQ(13)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6) DMAAck0 IRQ(14)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7) EOT/TC0 IRQ(15)*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ +} \ +} +#endif /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index d22d350..bce5fcd 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -50,7 +50,7 @@ #define MC_ASR_VAL 0x00000000 #define MC_AASR_VAL 0x00000000 #define EBI_CFGR_VAL 0x00000000 -#define SMC2_CSR_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */ +#define SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */ /* clocks */ #define PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */ diff --git a/include/configs/csb637.h b/include/configs/csb637.h index f93c3bc..e9c6d8e 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -51,7 +51,7 @@ #define MC_ASR_VAL 0x00000000 #define MC_AASR_VAL 0x00000000 #define EBI_CFGR_VAL 0x00000000 -#define SMC2_CSR_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ +#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ /* clocks */ #define PLLAR_VAL 0x2031BE01 /* 184.320000 MHz for PCK */ diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index 8ecd059..17d3b03 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -52,6 +52,9 @@ #define DV_EVM #define CFG_NAND_SMALLPAGE #define CFG_USE_NOR +#define CFG_USE_INTEL_NOR /* Define this when your DVEVM has Intel + * flash instead of AMD flash + */ /*===================*/ /* SoC Configuration */ /*===================*/ @@ -60,6 +63,24 @@ #define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ #define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CFG_HZ 1000 +#define CFG_DAVINCI_PINMUX_0 0x00000c1f +#define CFG_DAVINCI_WAITCFG 0x00000000 +#define CFG_DAVINCI_ACFG2 0x3ffffffd /* CE configs */ +#define CFG_DAVINCI_ACFG3 0x3ffffffd +#define CFG_DAVINCI_ACFG4 0x3ffffffd +#define CFG_DAVINCI_ACFG5 0x3ffffffd +#undef CFG_DAVINCI_NANDCE /* When using NAND, define 2,3 or 4 */ +#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */ +#define CFG_DAVINCI_SDREF 0x000005c3 +#define CFG_DAVINCI_SDCFG 0x00178632 /* 8 banks */ +#define CFG_DAVINCI_SDTIM0 0x28923211 +#define CFG_DAVINCI_SDTIM1 0x0016c722 +#define CFG_DAVINCI_MMARG_BRF0 0x00444400 +/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */ +#define CFG_DAVINCI_PLL1_PLLM 0x15 +#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */ +#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */ +#define CFG_DAVINCI_PLL2_DIV2 0x01 /*====================================================*/ /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ /* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ @@ -114,7 +135,7 @@ #ifdef CFG_USE_NAND #undef CFG_ENV_IS_IN_FLASH #define CFG_NO_FLASH -#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ #ifdef CFG_NAND_SMALLPAGE #define CFG_ENV_SECT_SIZE 512 /* Env sector Size */ #define CFG_ENV_SIZE SZ_16K @@ -139,24 +160,31 @@ #undef CONFIG_SKIP_RELOCATE_UBOOT #endif #define CFG_ENV_IS_IN_FLASH -#undef CFG_NO_FLASH +#undef CFG_NO_FLASH #define CFG_FLASH_CFI_DRIVER #define CFG_FLASH_CFI #define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */ -#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */ -#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*3) -#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) +#define CFG_ENV_OFFSET (CFG_ENV_ADDR) +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ #define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ -#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ +#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ #define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ) #define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */ +#ifdef CFG_USE_INTEL_NOR +#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size INTEL Flash */ +#define CFG_FLASH_PROTECTION 1 +#else +#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */ +#endif #endif /*==============================*/ /* U-Boot general configuration */ /*==============================*/ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY +#undef CONFIG_BOOTDELAY #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 96c9a30..cb69535 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -35,6 +35,24 @@ #define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ #define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CFG_HZ 1000 +#define CFG_DAVINCI_PINMUX_0 0x00000c1f +#define CFG_DAVINCI_WAITCFG 0x00000000 +#define CFG_DAVINCI_ACFG2 0x0432229c /* CE configs */ +#define CFG_DAVINCI_ACFG3 0x3ffffffd +#define CFG_DAVINCI_ACFG4 0x3ffffffd +#define CFG_DAVINCI_ACFG5 0x3ffffffd +#define CFG_DAVINCI_NANDCE 2 /* When using NAND, define 2,3 or 4 */ +#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */ +#define CFG_DAVINCI_SDREF 0x000005c3 +#define CFG_DAVINCI_SDCFG 0x00178622 /* 4 banks */ +#define CFG_DAVINCI_SDTIM0 0x28923211 +#define CFG_DAVINCI_SDTIM1 0x0016c722 +#define CFG_DAVINCI_MMARG_BRF0 0x00444400 +/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */ +#define CFG_DAVINCI_PLL1_PLLM 0x15 +#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */ +#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */ +#define CFG_DAVINCI_PLL2_DIV2 0x01 /*=============*/ /* Memory Info */ /*=============*/ @@ -46,7 +64,6 @@ #define CONFIG_STACKSIZE (256*1024) /* regular stack */ #define PHYS_SDRAM_1 0x80000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ -#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ /*====================*/ /* Serial Driver info */ /*====================*/ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index de8c4fa..b2c0d7d 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -60,6 +60,24 @@ #define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ #define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CFG_HZ 1000 +#define CFG_DAVINCI_PINMUX_0 0x00000c1f +#define CFG_DAVINCI_WAITCFG 0x00000000 +#define CFG_DAVINCI_ACFG2 0x3ffffffd /* CE configs */ +#define CFG_DAVINCI_ACFG3 0x3ffffffd +#define CFG_DAVINCI_ACFG4 0x3ffffffd +#define CFG_DAVINCI_ACFG5 0x3ffffffd +#undef CFG_DAVINCI_NANDCE /* When using NAND, define 2,3 or 4 */ +#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */ +#define CFG_DAVINCI_SDREF 0x000005c3 +#define CFG_DAVINCI_SDCFG 0x00178632 /* 8 banks */ +#define CFG_DAVINCI_SDTIM0 0x28923211 +#define CFG_DAVINCI_SDTIM1 0x0016c722 +#define CFG_DAVINCI_MMARG_BRF0 0x00444400 +/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */ +#define CFG_DAVINCI_PLL1_PLLM 0x15 +#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */ +#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */ +#define CFG_DAVINCI_PLL2_DIV2 0x01 /*====================================================*/ /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ /* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h new file mode 100644 index 0000000..a6ed77a --- /dev/null +++ b/include/configs/imx31_litekit.h @@ -0,0 +1,167 @@ +/* + * (C) Copyright 2004 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Kshitij Gupta <kshitij@ti.com> + * + * Configuration settings for the 242x TI H4 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + /* High Level Configuration Options */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_MX31 1 /* in a mx31 */ +#define CONFIG_MX31_HCLK_FREQ 26000000 +#define CONFIG_MX31_CLK32 32000 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Temporarily disabled */ +#if 0 +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 +#endif + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024) +#define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +#define CONFIG_MX31_UART 1 +#define CFG_MX31_UART1 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.23.168 +#define CONFIG_SERVERIP 192.168.23.2 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \ + "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ + "ip=dhcp nfsroot=$(serverip):$(nfsrootfs), v3, tcp\0" \ + "bootcmd=run bootcmd_net\0" \ + "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \ + "tftpboot 0x80000000 uImage-mx31; bootm\0" \ + "prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; " \ + "protect off all; erase 0xa00d0000 0xa01effff; " \ + "cp.b 0x80000000 0xa00d0000 $(filesize)\0" + +#define CONFIG_DRIVER_SMC911X 1 +#define CONFIG_DRIVER_SMC911X_BASE 0xb4020000 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "uboot> " +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0 /* memtest works on */ +#define CFG_MEMTEST_END 0x10000 + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0 /* default load address */ + +#define CFG_HZ 32000 + +#define CONFIG_CMDLINE_EDITING 1 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_FLASH_BASE 0xa0000000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +/* Monitor at beginning of flash */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE + +#define CFG_ENV_ADDR 0xa01f0000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SECT_SIZE (64 * 1024) +#define CFG_ENV_SIZE (64 * 1024) + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */ + +/* + * JFFS2 partitions + */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" + +#endif /* __CONFIG_H */ diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h new file mode 100644 index 0000000..647b05b --- /dev/null +++ b/include/configs/imx31_phycore.h @@ -0,0 +1,190 @@ +/* + * (C) Copyright 2004 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Kshitij Gupta <kshitij@ti.com> + * + * Configuration settings for the 242x TI H4 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + /* High Level Configuration Options */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_MX31 1 /* in a mx31 */ +#define CONFIG_MX31_HCLK_FREQ 26000000 +#define CONFIG_MX31_CLK32 32000 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Temporarily disabled */ +#if 0 +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 +#endif + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024) +#define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +#define CONFIG_HARD_I2C 1 +#define CONFIG_I2C_MXC 1 +#define CFG_I2C_MX31_PORT2 1 +#define CFG_I2C_SPEED 100000 +#define CFG_I2C_SLAVE 0xfe + +#define CONFIG_MX31_UART 1 +#define CFG_MX31_UART1 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C + +#define CONFIG_BOOTDELAY 3 + +#define MTDPARTS_DEFAULT \ + "mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)" + +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.23.168 +#define CONFIG_SERVERIP 192.168.23.2 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \ + "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ + "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ + "bootargs_flash=setenv bootargs $(bootargs) " \ + "root=/dev/mtdblock2 rootfstype=jffs2\0" \ + "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0" \ + "bootcmd=run bootcmd_net\0" \ + "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \ + "tftpboot 0x80000000 $(uimage); bootm\0" \ + "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash; " \ + "bootm 0x80000000\0" \ + "unlock=yes\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "prg_uboot=tftpboot 0x80000000 $(uboot); " \ + "protect off 0xa0000000 +0x20000; " \ + "erase 0xa0000000 +0x20000; " \ + "cp.b 0x80000000 0xa0000000 $(filesize)\0" \ + "prg_kernel=tftpboot 0x80000000 $(uimage); " \ + "erase 0xa0040000 +0x180000; " \ + "cp.b 0x80000000 0xa0040000 $(filesize)\0" \ + "prg_jffs2=tftpboot 0x80000000 $(jffs2); " \ + "erase 0xa01c0000 0xa1ffffff; " \ + "cp.b 0x80000000 0xa01c0000 $(filesize)\0" + +#define CONFIG_DRIVER_SMC911X 1 +#define CONFIG_DRIVER_SMC911X_BASE 0xa8000000 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "uboot> " +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0 /* memtest works on */ +#define CFG_MEMTEST_END 0x10000 + +#define CFG_LOAD_ADDR 0 /* default load address */ + +#define CFG_HZ 32000 + +#define CONFIG_CMDLINE_EDITING 1 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_FLASH_BASE 0xa0000000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 259 /* max number of sectors on one chip */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ + +#define CFG_ENV_IS_IN_EEPROM 1 +#define CFG_ENV_OFFSET 0x00 /* environment starts here */ +#define CFG_ENV_SIZE 4096 +#define CFG_I2C_EEPROM_ADDR 0x52 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* between stop and start */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* length of byte address */ + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */ + +/* + * JFFS2 partitions + */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" + +#endif /* __CONFIG_H */ diff --git a/include/configs/korat.h b/include/configs/korat.h index dcec9b0..48d73ac 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -45,10 +45,10 @@ * Manufacturer's information serial EEPROM parameters */ #define MAN_DATA_EEPROM_ADDR 0x53 /* EEPROM I2C address */ -#define MAN_SERIAL_NO_FIELD 2 -#define MAN_SERIAL_NO_LENGTH 13 +#define MAN_INFO_FIELD 2 +#define MAN_INFO_LENGTH 9 #define MAN_MAC_ADDR_FIELD 3 -#define MAN_MAC_ADDR_LENGTH 17 +#define MAN_MAC_ADDR_LENGTH 12 /* * Base addresses -- Note these are effective addresses where the actual @@ -57,17 +57,18 @@ #define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kiB for Monitor */ #define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kiB for malloc() */ -#define CFG_BOOT_BASE_ADDR 0xf0000000 #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ +#define CFG_FLASH0_SIZE 0x01000000 +#define CFG_FLASH0_ADDR (-CFG_FLASH0_SIZE) +#define CFG_FLASH1_TOP 0xF8000000 +#define CFG_FLASH1_MAX_SIZE 0x08000000 +#define CFG_FLASH1_ADDR (CFG_FLASH1_TOP - CFG_FLASH1_MAX_SIZE) +#define CFG_FLASH_BASE CFG_FLASH1_ADDR /* start of FLASH */ #define CFG_MONITOR_BASE TEXT_BASE #define CFG_OCM_BASE 0xe0010000 /* ocm */ #define CFG_OCM_DATA_ADDR CFG_OCM_BASE #define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ #define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 -#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 -#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 /* Don't change either of these */ #define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ @@ -108,13 +109,14 @@ /* * FLASH related */ -#define CFG_FLASH_CFI /* The flash is CFI compatible */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CONFIG_FLASH_CFI_LEGACY /* Allow hard-coded config for FLASH0 */ -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_BANKS_LIST { CFG_FLASH1_ADDR, CFG_FLASH0_ADDR } -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 1024 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ @@ -126,12 +128,12 @@ #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ #define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ -#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_FLASH1_TOP - CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ -/* Address and size of Redundant Environment Sector */ -#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE /* * DDR SDRAM @@ -144,6 +146,8 @@ #define SPD_EEPROM_ADDRESS {0x50} #define CONFIG_PROG_SDRAM_TLB #define CFG_DRAM_TEST +#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ + /* 440EPx errata CHIP 11 */ /* * I2C @@ -180,6 +184,7 @@ #define CFG_BOOTFILE "bootfile=/tftpboot/korat/uImage\0" #define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0" +/* Note: kernel_addr and ramdisk_addr assume that FLASH1 is 64 MiB. */ #define CONFIG_EXTRA_ENV_SETTINGS \ CFG_BOOTFILE \ CFG_ROOTPATH \ @@ -197,8 +202,8 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ "bootm\0" \ - "kernel_addr=FC000000\0" \ - "ramdisk_addr=FC180000\0" \ + "kernel_addr=F4000000\0" \ + "ramdisk_addr=F4400000\0" \ "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \ "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \ "cp.b 200000 FFFA0000 60000\0" \ @@ -216,7 +221,7 @@ #define CONFIG_PHY_ADDR 2 /* PHY address, See schematics */ #define CONFIG_PHY_DYNAMIC_ANEG 1 -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#undef CONFIG_PHY_RESET /* Don't do software PHY reset */ #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ #define CONFIG_HAS_ETH0 @@ -322,6 +327,11 @@ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ /* + * Korat-specific options + */ +#define CFG_KORAT_MAN_RESET_MS 10000 /* timeout for manufacturer reset */ + +/* * PCI stuff */ /* General PCI */ @@ -350,12 +360,23 @@ */ /* Memory Bank 0 (NOR-FLASH) initialization */ +#if CFG_FLASH0_SIZE == 0x01000000 +#define CFG_EBC_PB0AP 0x04017300 +#define CFG_EBC_PB0CR (CFG_FLASH0_ADDR | 0x0009A000) +#elif CFG_FLASH0_SIZE == 0x04000000 #define CFG_EBC_PB0AP 0x04017300 -#define CFG_EBC_PB0CR (CFG_FLASH_BASE | 0x000DA000) +#define CFG_EBC_PB0CR (CFG_FLASH0_ADDR | 0x000DA000) +#else +#error Unable to configure chip select for current CFG_FLASH0_SIZE +#endif /* Memory Bank 1 (NOR-FLASH) initialization */ +#if CFG_FLASH1_MAX_SIZE == 0x08000000 #define CFG_EBC_PB1AP 0x04017300 -#define CFG_EBC_PB1CR (0xF8000000 | 0x000DA000) +#define CFG_EBC_PB1CR (CFG_FLASH1_ADDR | 0x000FA000) +#else +#error Unable to configure chip select for current CFG_FLASH1_MAX_SIZE +#endif /* Memory Bank 2 (CPLD) initialization */ #define CFG_EBC_PB2AP 0x04017300 @@ -426,6 +447,7 @@ * GPIO63 xxxx x x (reserved for trace port) */ +#define CFG_GPIO_ATMEGA_RESET_ 12 #define CFG_GPIO_ATMEGA_SS_ 13 #define CFG_GPIO_PHY0_FIBER_SEL 27 #define CFG_GPIO_PHY1_FIBER_SEL 28 @@ -435,6 +457,7 @@ #define CFG_GPIO_SFP1_TX_EN_ 33 #define CFG_GPIO_PHY0_EN 45 #define CFG_GPIO_PHY1_EN 46 +#define CFG_GPIO_RESET_PRESSED_ 47 /* * PPC440 GPIO Configuration diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index ced7ba6..4398b87 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or @@ -86,6 +86,8 @@ #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET #define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6) /* unused GPT0 COMP reg */ +#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ + /* 440EPx errata CHIP 11 */ /* Additional registers for watchdog timer post test */ @@ -149,12 +151,8 @@ #define CFG_MBYTES_SDRAM (256) /* 256MB */ #define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */ #define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */ -#if 0 /* test-only: disable ECC for now */ #define CONFIG_DDR_ECC 1 /* enable ECC */ #define CFG_POST_ECC_ON CFG_POST_ECC -#else -#define CFG_POST_ECC_ON 0 -#endif /* POST support */ #define CONFIG_POST (CFG_POST_CACHE | \ diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 294221f..2eb4af1 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -55,7 +55,7 @@ #define MC_ASR_VAL 0x00000000 #define MC_AASR_VAL 0x00000000 #define EBI_CFGR_VAL 0x00000000 -#define SMC2_CSR_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */ +#define SMC_CSR0_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */ /* clocks */ #define PLLAR_VAL 0x20263E04 /* 180 MHz for PCK */ diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h new file mode 100644 index 0000000..0fc0b97 --- /dev/null +++ b/include/configs/mpr2.h @@ -0,0 +1,92 @@ +/* + * Configuation settings for MPR2 + * + * Copyright (C) 2008 + * Mark Jonas <mark.jonas@de.bosch.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MPR2_H +#define __MPR2_H + +/* Supported commands */ +#define CONFIG_CMD_ENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_FLASH + +/* Default environment variables */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS "console=ttySC0,115200" +#define CONFIG_BOOTFILE /boot/zImage +#define CONFIG_LOADADDR 0x8E000000 +#define CONFIG_VERSION_VARIABLE + +/* CPU and platform */ +#define CONFIG_SH 1 +#define CONFIG_SH3 1 +#define CONFIG_CPU_SH7720 1 +#define CONFIG_MPR2 1 + +/* U-Boot internals */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Buffer size for input from the Console */ +#define CFG_PBSIZE 256 /* Buffer size for Console output */ +#define CFG_MAXARGS 16 /* max args accepted for monitor commands */ +#define CFG_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */ +#define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024) +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MONITOR_LEN (128 * 1024) +#define CFG_MALLOC_LEN (256 * 1024) +#define CFG_GBL_DATA_SIZE 256 + +/* Memory */ +#define CFG_SDRAM_BASE 0x8C000000 +#define CFG_SDRAM_SIZE (64 * 1024 * 1024) +#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024)) + +/* Flash */ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_BASE 0xA0000000 +#define CFG_MAX_FLASH_SECT 256 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE (128 * 1024) +#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_FLASH_ERASE_TOUT 120000 +#define CFG_FLASH_WRITE_TOUT 500 + +/* Clocks */ +#define CONFIG_SYS_CLK_FREQ 24000000 +#define TMU_CLK_DIVIDER 4 /* 4 (default), 16, 64, 256 or 1024 */ +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +/* UART */ +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_CONS_SCIF0 1 + +#endif /* __MPR2_H */ diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h new file mode 100644 index 0000000..be7f3c6 --- /dev/null +++ b/include/configs/mx31ads.h @@ -0,0 +1,170 @@ +/* + * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de> + * + * Configuration settings for the MX31ADS Freescale board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/mx31-regs.h> + + /* High Level Configuration Options */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_MX31 1 /* in a mx31 */ +#define CONFIG_MX31_HCLK_FREQ 26000000 /* RedBoot says 26MHz */ +#define CONFIG_MX31_CLK32 32000 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* + * Disabled for now due to build problems under Debian and + * a significant increase in the final file size: 144260 vs. 109536 Bytes + */ +#if 0 +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 +#endif + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024) +#define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +#define CONFIG_MX31_UART 1 +#define CFG_MX31_UART1 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.23.168 +#define CONFIG_SERVERIP 192.168.23.2 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \ + "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ + "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ + "bootcmd=run bootcmd_net\0" \ + "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \ + "tftpboot 0x80000000 uImage-mx31; bootm\0" \ + "prg_uboot=tftpboot 0x80000000 u-boot-mx31ads.bin; " \ + "protect off 0xa0000000 0xa001ffff; " \ + "erase 0xa0000000 0xa001ffff; " \ + "cp.b 0x80000000 0xa0000000 $(filesize)\0" + +#define CONFIG_DRIVER_CS8900 1 +#define CS8900_BASE 0xb4020300 +#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0 /* memtest works on */ +#define CFG_MEMTEST_END 0x10000 + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR CSD0_BASE /* default load address */ + +#define CFG_HZ 32000 + +#define CONFIG_CMDLINE_EDITING 1 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_BASE +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_FLASH_BASE CS0_BASE +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 262 /* max number of sectors on one chip */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ +#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128KiB */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SECT_SIZE (32 * 1024) +#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +/* S29WS256N NOR flash has 4 32KiB small sectors at beginning and end. + * The rest of 32MiB is in 128KiB big sectors. + * U-Boot occupies the low 4 sectors, + * if we put environment next to it, we will have to occupy 128KiB for it. + * Putting it at the top of flash we use only 32KiB. */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 32 * 1024 * 1024 - CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#if 0 /* Doesn't work yet, work in progress */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes(~10x faster)*/ +#endif +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ + +/* + * JFFS2 partitions + */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" + +#endif /* __CONFIG_H */ diff --git a/include/configs/pmdra.h b/include/configs/pmdra.h new file mode 100644 index 0000000..e170ee9 --- /dev/null +++ b/include/configs/pmdra.h @@ -0,0 +1,186 @@ +/* + * Copyright (C) 2008 Prodrive BV <pieter.voorthijsen@prodrive.nl> + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/*=======*/ +/* Board */ +/*=======*/ +#define CFG_PMDRA +#define CFG_NAND_LARGEPAGE +/*===================*/ +/* SoC Configuration */ +/*===================*/ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SYS_CLK_FREQ ((CFG_HZ_CLOCK * (CFG_DAVINCI_PLL1_PLLM + 1))/2) +#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ +#define CFG_HZ 1000 +#define CFG_DAVINCI_PINMUX_0 0x00000c1f +#define CFG_DAVINCI_WAITCFG 0x10000000 +#define CFG_DAVINCI_ACFG2 0x00460385 /* NOR CE Config */ +#define CFG_DAVINCI_ACFG3 0x0822218c /* NAND CE Config */ +#define CFG_DAVINCI_ACFG4 0x3ffffffd +#define CFG_DAVINCI_ACFG5 0x3ffffffd +#define CFG_DAVINCI_NANDCE 3 /* Use CE3 for NAND */ +#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */ +#define CFG_DAVINCI_SDREF 0x000005c3 +#define CFG_DAVINCI_SDCFG 0x00178832 /* 8 banks , CAS = 4*/ +#define CFG_DAVINCI_SDTIM0 0x28923211 +#define CFG_DAVINCI_SDTIM1 0x0016c722 +#define CFG_DAVINCI_MMARG_BRF0 0x00444400 +/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */ +#define CFG_DAVINCI_PLL1_PLLM 0x12 +#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */ +#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */ +#define CFG_DAVINCI_PLL2_DIV2 0x01 +/*====================================================*/ +/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ +/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ +/*====================================================*/ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_EEPROM_PAGE_WRITE_BITS 6 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +/*=============*/ +/* Memory Info */ +/*=============*/ +#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ +#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define CFG_MEMTEST_START 0x80000000 /* memtest start address */ +#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */ +#define DDR_8BANKS /* 8-bank DDR2 (256MB) */ +/*====================*/ +/* Serial Driver info */ +/*====================*/ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ +#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */ +#define CFG_NS16550_COM2 0x01c20800 /* Base address of UART2 */ +#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/*===================*/ +/* I2C Configuration */ +/*===================*/ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CFG_I2C_SPEED 50000 /* 100Kbps won't work, silicon bug */ +#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +/*==================================*/ +/* Network & Ethernet Configuration */ +/*==================================*/ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +/*=====================*/ +/* Flash & Environment */ +/*=====================*/ +#define CFG_USE_NAND +#define CFG_NAND_BASE 0x04000000 +#undef CFG_NAND_HW_ECC +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define DEF_BOOTM "" +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */ +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) +#define CFG_ENV_OFFSET (CFG_ENV_ADDR) +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster)*/ +#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ +#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ +#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ +#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ) +#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */ +#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size INTEL Flash */ +#define CFG_FLASH_PROTECTION 1 +/*==============================*/ +/* U-Boot general configuration */ +/*==============================*/ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_MISC_INIT_R +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CFG_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +#define CONFIG_ENV_OVERWRITE +/*===================*/ +/* Linux Information */ +/*===================*/ +#define LINUX_BOOT_PARAM_ADDR 0x80000100 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTDELAY 2 +#define CONFIG_BOOTARGS \ + "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" +#define CONFIG_BOOTCOMMAND "run nand" +#define CONFIG_EXTRA_ENV_SETTINGS "ethaddr=00:11:22:33:44:55\n" +/*=================*/ +/* U-Boot commands */ +/*=================*/ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_EEPROM +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#define CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +/*=======================*/ +/* KGDB support (if any) */ +/*=======================*/ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h new file mode 100644 index 0000000..c20baca --- /dev/null +++ b/include/configs/r2dplus.h @@ -0,0 +1,150 @@ +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +#define CONFIG_SH 1 +#define CONFIG_SH4 1 +#define CONFIG_CPU_SH7751 1 +#define CONFIG_CPU_SH_TYPE_R 1 +#define CONFIG_R2DPLUS 1 +#define __LITTLE_ENDIAN__ 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DFL +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_IDE +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION + +/* SCIF */ +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_SCIF1 1 +#define BOARD_LATE_INIT 1 + +#define CONFIG_BOOTDELAY -1 +#define CONFIG_BOOTARGS "console=ttySC0,115200" +#define CONFIG_ENV_OVERWRITE 1 + +/* Network setting */ +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_IPADDR 10.0.192.51 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1 + +/* SDRAM */ +#define CFG_SDRAM_BASE (0x8C000000) +#define CFG_SDRAM_SIZE (0x04000000) + +#define CFG_LONGHELP +#define CFG_PROMPT "=> " +#define CFG_CBSIZE 256 +#define CFG_PBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE 512 +/* List of legal baudrate settings for this board */ +#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } + +#define CFG_MEMTEST_START (CFG_SDRAM_BASE) +#define CFG_MEMTEST_END (TEXT_BASE - 0x100000) + +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024) +/* Address of u-boot image in Flash */ +#define CFG_MONITOR_BASE (CFG_FLASH_BASE) +#define CFG_MONITOR_LEN (128 * 1024) +/* Size of DRAM reserved for malloc() use */ +#define CFG_MALLOC_LEN (256 * 1024) +/* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_SIZE (256) +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) + +/* + * NOR Flash + */ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER + +#if defined(CONFIG_R2DPLUS_OLD) +#define CFG_FLASH_BASE (0xA0000000) +#define CFG_MAX_FLASH_BANKS (1) /* Max number of + * Flash memory banks + */ +#define CFG_MAX_FLASH_SECT 142 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#else /* CONFIG_R2DPLUS_OLD */ + +#define CFG_FLASH_BASE (0xA0000000) +#define CFG_FLASH_CFI_WIDTH 0x04 /* 32bit */ +#define CFG_MAX_FLASH_BANKS (2) +#define CFG_MAX_FLASH_SECT 270 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ + CFG_FLASH_BASE + 0x100000,\ + CFG_FLASH_BASE + 0x400000,\ + CFG_FLASH_BASE + 0x700000, } +#endif /* CONFIG_R2DPLUS_OLD */ + +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_FLASH_ERASE_TOUT 120000 +#define CFG_FLASH_WRITE_TOUT 500 + +/* + * SuperH Clock setting + */ +#define CONFIG_SYS_CLK_FREQ 60000000 +#define TMU_CLK_DIVIDER 4 +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CFG_PLL_SETTLING_TIME 100/* in us */ + +/* + * IDE support + */ +#define CONFIG_IDE_RESET 1 +#define CFG_PIO_MODE 1 +#define CFG_IDE_MAXBUS 1 /* IDE bus */ +#define CFG_IDE_MAXDEVICE 1 +#define CFG_ATA_BASE_ADDR 0xb4000000 +#define CFG_ATA_STRIDE 2 /* 1bit shift */ +#define CFG_ATA_DATA_OFFSET 0x1000 /* data reg offset */ +#define CFG_ATA_REG_OFFSET 0x1000 /* reg offset */ +#define CFG_ATA_ALT_OFFSET 0x800 /* alternate register offset */ + +/* + * SuperH PCI Bridge Configration + */ +#define CONFIG_PCI +#define CONFIG_SH4_PCI +#define CONFIG_SH7751_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW 1 +#define __io +#define __mem_pci + +#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ +#define CONFIG_PCI_IO_BUS 0xFE240000 /* IO space base address */ +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x00040000 /* Size of IO window */ + +/* + * Network device (RTL8139) support + */ +#define CONFIG_NET_MULTI +#define CONFIG_RTL8139 +#define _IO_BASE 0x00000000 +#define KSEG1ADDR(x) (x) + +#endif /* __CONFIG_H */ diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h new file mode 100644 index 0000000..42787f4 --- /dev/null +++ b/include/configs/r7780mp.h @@ -0,0 +1,165 @@ +/* + * Configuation settings for the Renesas R7780MP board + * + * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __R7780RP_H +#define __R7780RP_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH4A 1 +#define CONFIG_CPU_SH7780 1 +#define CONFIG_R7780MP 1 +#define __LITTLE_ENDIAN 1 + +/* + * Command line configuration. + */ +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_ENV +#define CONFIG_CMD_NFS +#define CONFIG_CMD_IDE +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION + +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_SCIF0 1 + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttySC0,115200" +#define CONFIG_ENV_OVERWRITE 1 + +/* check for keypress on bootdelay==0 */ +/*#define CONFIG_ZERO_BOOTDELAY_CHECK*/ + +/* Network setting */ +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_IPADDR 10.0.192.82 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1 + +#define CFG_SDRAM_BASE (0x08000000) +#define CFG_SDRAM_SIZE (128 * 1024 * 1024) + +#define CFG_LONGHELP +#define CFG_PROMPT "=> " +#define CFG_CBSIZE 256 +#define CFG_PBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE 512 +/* List of legal baudrate settings for this board */ +#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } + +#define CFG_MEMTEST_START (CFG_SDRAM_BASE) +#define CFG_MEMTEST_END (TEXT_BASE - 0x100000) + +/* NOR Flash (S29PL127J60TFI130) */ +#define CFG_FLASH_BASE (0xA0000000) +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT +#define CFG_MAX_FLASH_BANKS (2) +#define CFG_MAX_FLASH_SECT 270 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ + CFG_FLASH_BASE + 0x100000,\ + CFG_FLASH_BASE + 0x400000,\ + CFG_FLASH_BASE + 0x700000, } + +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) +/* Address of u-boot image in Flash */ +#define CFG_MONITOR_BASE (CFG_FLASH_BASE) +#define CFG_MONITOR_LEN (112 * 1024) +/* Size of DRAM reserved for malloc() use */ +#define CFG_MALLOC_LEN (256 * 1024) + +/* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_SIZE (256) +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) +#define CFG_RX_ETH_BUFFER (8) + +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#undef CFG_FLASH_CFI_BROKEN_TABLE +#undef CFG_FLASH_QUIET_TEST +/* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_EMPTY_INFO + +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE (16 * 1024) +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_FLASH_ERASE_TOUT 120000 +#define CFG_FLASH_WRITE_TOUT 500 + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 33333333 +#define TMU_CLK_DIVIDER 4 +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +/* PCI Controller */ +#if defined(CONFIG_CMD_PCI) +#define CONFIG_PCI +#define CONFIG_SH4_PCI +#define CONFIG_SH7780_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW 1 +#define __io +#define __mem_pci + +#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ + +#define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */ +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */ +#endif /* CONFIG_CMD_PCI */ + +#if defined(CONFIG_CMD_NET) +/* #define CONFIG_NET_MULTI + #define CONFIG_RTL8169 */ +/* AX88696L Support(NE2000 base chip) */ +#define CONFIG_DRIVER_NE2000 +#define CONFIG_DRIVER_AX88796L +#define CONFIG_DRIVER_NE2000_BASE 0xA4100000 +#endif + +/* Compact flash Support */ +#if defined(CONFIG_CMD_IDE) +#define CONFIG_IDE_RESET 1 +#define CFG_PIO_MODE 1 +#define CFG_IDE_MAXBUS 1 /* IDE bus */ +#define CFG_IDE_MAXDEVICE 1 +#define CFG_ATA_BASE_ADDR 0xb4000000 +#define CFG_ATA_STRIDE 2 /* 1bit shift */ +#define CFG_ATA_DATA_OFFSET 0x1000 /* data reg offset */ +#define CFG_ATA_REG_OFFSET 0x1000 /* reg offset */ +#define CFG_ATA_ALT_OFFSET 0x800 /* alternate register offset */ +#endif /* CONFIG_CMD_IDE */ + +#endif /* __R7780RP_H */ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index dfa8779..555316f 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -221,6 +221,8 @@ #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ #endif +#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ + /* 440EPx errata CHIP 11 */ /* * I2C @@ -275,7 +277,7 @@ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ - "addmisc=setenv bootargs ${bootargs} mem=${mem}\0" \ + "addmisc=setenv bootargs ${bootargs}\0" \ "flash_nfs=run nfsargs addip addtty addmisc;" \ "bootm ${kernel_addr}\0" \ "flash_self=run ramargs addip addtty addmisc;" \ diff --git a/include/dataflash.h b/include/dataflash.h index fbd5e17..68f0324 100644 --- a/include/dataflash.h +++ b/include/dataflash.h @@ -38,11 +38,7 @@ #include "config.h" /*number of protected area*/ -#ifdef CONFIG_NEW_PARTITION -# define NB_DATAFLASH_AREA 6 -#else -# define NB_DATAFLASH_AREA 4 -#endif +#define NB_DATAFLASH_AREA 5 #ifdef CFG_NO_FLASH diff --git a/include/linux/stat.h b/include/linux/stat.h index 37f2924..2ce1c25 100644 --- a/include/linux/stat.h +++ b/include/linux/stat.h @@ -126,7 +126,7 @@ struct stat { #endif /* __MIPS__ */ -#if defined(__AVR32__) +#if defined(__AVR32__) || defined(__SH__) struct stat { unsigned long st_dev; @@ -149,7 +149,7 @@ struct stat { unsigned long __unused5; }; -#endif /* __AVR32__ */ +#endif /* __AVR32__ || __SH__ */ #ifdef __cplusplus } diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 4ee38aa..d2e1e2b 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -48,71 +48,36 @@ /* SPRIDR - System Part and Revision ID Register */ -#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification */ -#define SPRIDR_REVID 0x0000FFFF /* Revision Identification */ - -#define SPR_8349E_REV10 0x80300100 -#define SPR_8349_REV10 0x80310100 -#define SPR_8347E_REV10_TBGA 0x80320100 -#define SPR_8347_REV10_TBGA 0x80330100 -#define SPR_8347E_REV10_PBGA 0x80340100 -#define SPR_8347_REV10_PBGA 0x80350100 -#define SPR_8343E_REV10 0x80360100 -#define SPR_8343_REV10 0x80370100 - -#define SPR_8349E_REV11 0x80300101 -#define SPR_8349_REV11 0x80310101 -#define SPR_8347E_REV11_TBGA 0x80320101 -#define SPR_8347_REV11_TBGA 0x80330101 -#define SPR_8347E_REV11_PBGA 0x80340101 -#define SPR_8347_REV11_PBGA 0x80350101 -#define SPR_8343E_REV11 0x80360101 -#define SPR_8343_REV11 0x80370101 - -#define SPR_8349E_REV31 0x80300300 -#define SPR_8349_REV31 0x80310300 -#define SPR_8347E_REV31_TBGA 0x80320300 -#define SPR_8347_REV31_TBGA 0x80330300 -#define SPR_8347E_REV31_PBGA 0x80340300 -#define SPR_8347_REV31_PBGA 0x80350300 -#define SPR_8343E_REV31 0x80360300 -#define SPR_8343_REV31 0x80370300 - -#define SPR_8360E_REV10 0x80480010 -#define SPR_8360_REV10 0x80490010 -#define SPR_8360E_REV11 0x80480011 -#define SPR_8360_REV11 0x80490011 -#define SPR_8360E_REV12 0x80480012 -#define SPR_8360_REV12 0x80490012 -#define SPR_8360E_REV20 0x80480020 -#define SPR_8360_REV20 0x80490020 -#define SPR_8360E_REV21 0x80480021 -#define SPR_8360_REV21 0x80490021 - -#define SPR_8323E_REV10 0x80620010 -#define SPR_8323_REV10 0x80630010 -#define SPR_8321E_REV10 0x80660010 -#define SPR_8321_REV10 0x80670010 -#define SPR_8323E_REV11 0x80620011 -#define SPR_8323_REV11 0x80630011 -#define SPR_8321E_REV11 0x80660011 -#define SPR_8321_REV11 0x80670011 - -#define SPR_8313E_REV10 0x80B00010 -#define SPR_8313_REV10 0x80B10010 -#define SPR_8311E_REV10 0x80B20010 -#define SPR_8311_REV10 0x80B30010 -#define SPR_8315E_REV10 0x80B40010 -#define SPR_8315_REV10 0x80B50010 -#define SPR_8314E_REV10 0x80B60010 -#define SPR_8314_REV10 0x80B70010 - -#define SPR_8379E_REV10 0x80C20010 -#define SPR_8379_REV10 0x80C30010 -#define SPR_8378E_REV10 0x80C40010 -#define SPR_8378_REV10 0x80C50010 -#define SPR_8377E_REV10 0x80C60010 -#define SPR_8377_REV10 0x80C70010 +#define SPRIDR_PARTID 0xFFFF0000 /* Part Id */ +#define SPRIDR_REVID 0x0000FFFF /* Revision Id */ + +#if defined(CONFIG_MPC834X) +#define REVID_MAJOR(spridr) ((spridr & 0x0000FF00) >> 8) +#define REVID_MINOR(spridr) (spridr & 0x000000FF) +#else +#define REVID_MAJOR(spridr) ((spridr & 0x000000F0) >> 4) +#define REVID_MINOR(spridr) (spridr & 0x0000000F) +#endif + +#define PARTID_NO_E(spridr) ((spridr & 0xFFFE0000) >> 16) +#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000)) /* has SEC */ + +#define SPR_8311 0x80B2 +#define SPR_8313 0x80B0 +#define SPR_8314 0x80B6 +#define SPR_8315 0x80B4 +#define SPR_8321 0x8066 +#define SPR_8323 0x8062 +#define SPR_8343 0x8036 +#define SPR_8347_TBGA_ 0x8032 +#define SPR_8347_PBGA_ 0x8034 +#define SPR_8349 0x8030 +#define SPR_8358_TBGA_ 0x804A +#define SPR_8358_PBGA_ 0x804E +#define SPR_8360 0x8048 +#define SPR_8377 0x80C6 +#define SPR_8378 0x80C4 +#define SPR_8379 0x80C2 /* SPCR - System Priority Configuration Register */ diff --git a/include/pci_ids.h b/include/pci_ids.h index b0c1957..593c074 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -1810,6 +1810,7 @@ #define PCI_DEVICE_ID_INTEL_82434 0x04a3 #define PCI_DEVICE_ID_INTEL_I960 0x0960 #define PCI_DEVICE_ID_INTEL_I960RM 0x0962 +#define PCI_DEVICE_ID_INTEL_82541ER 0x1078 #define PCI_DEVICE_ID_INTEL_82542 0x1000 #define PCI_DEVICE_ID_INTEL_82543GC_FIBER 0x1001 #define PCI_DEVICE_ID_INTEL_82543GC_COPPER 0x1004 diff --git a/include/ppc440.h b/include/ppc440.h index 10517cb..642d1de 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -2023,9 +2023,13 @@ #define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg */ #define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg */ #define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table pointer reg */ +#define malrxctp16r (MAL_DCR_BASE+0x50) /* RX 16 Channel table pointer reg */ +#define malrxctp24r (MAL_DCR_BASE+0x58) /* RX 24 Channel table pointer reg */ #define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */ #define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */ #define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */ +#define malrcbs16 (MAL_DCR_BASE+0x70) /* RX 16 Channel buffer size reg */ +#define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */ #endif /* CONFIG_440GX */ diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h index 0208454..89ff26f 100644 --- a/include/ppc4xx_enet.h +++ b/include/ppc4xx_enet.h @@ -213,6 +213,10 @@ typedef struct emac_4xx_hw_st { #define RGMII_FER (RGMII_BASE + 0x00) #define RGMII_SSR (RGMII_BASE + 0x04) +#if defined(CONFIG_460GT) +#define RGMII1_BASE_OFFSET 0x100 +#endif + /* RGMII Function Enable (FER) Register Bit Definitions */ /* Note: for EMAC 2 and 3 only, 440GX only */ #define RGMII_FER_DIS (0x00) diff --git a/lib_blackfin/Makefile b/lib_blackfin/Makefile index dfaed6d..3617104 100644 --- a/lib_blackfin/Makefile +++ b/lib_blackfin/Makefile @@ -1,7 +1,7 @@ # # U-boot Makefile # -# Copyright (c) 2005-2007 Analog Devices Inc. +# Copyright (c) 2005-2008 Analog Devices Inc. # # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -27,6 +27,8 @@ include $(TOPDIR)/config.mk +CFLAGS += -DBFIN_BOARD_NAME='"$(BOARD)"' + LIB = $(obj)lib$(ARCH).a SOBJS-y += memcmp.o @@ -34,12 +36,12 @@ SOBJS-y += memcpy.o SOBJS-y += memmove.o SOBJS-y += memset.o -COBJS-y += bf533_string.o COBJS-y += board.o COBJS-y += bootm.o COBJS-y += cache.o COBJS-y += muldi3.o COBJS-y += post.o +COBJS-y += string.o COBJS-y += tests.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) diff --git a/lib_blackfin/bf533_string.c b/lib_blackfin/bf533_string.c deleted file mode 100644 index 9ceeeef..0000000 --- a/lib_blackfin/bf533_string.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * U-boot - bf533_string.c Contains library routines. - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/io.h> -#include "cache.h" -#include <asm/mach-common/bits/dma.h> - -char *strcpy(char *dest, const char *src) -{ - char *xdest = dest; - char temp = 0; - - __asm__ __volatile__ - ("1:\t%2 = B [%1++] (Z);\n\t" - "B [%0++] = %2;\n\t" - "CC = %2;\n\t" - "if cc jump 1b (bp);\n":"=a"(dest), "=a"(src), "=d"(temp) - :"0"(dest), "1"(src), "2"(temp):"memory"); - - return xdest; -} - -char *strncpy(char *dest, const char *src, size_t n) -{ - char *xdest = dest; - char temp = 0; - - if (n == 0) - return xdest; - - __asm__ __volatile__ - ("1:\t%3 = B [%1++] (Z);\n\t" - "B [%0++] = %3;\n\t" - "CC = %3;\n\t" - "if ! cc jump 2f;\n\t" - "%2 += -1;\n\t" - "CC = %2 == 0;\n\t" - "if ! cc jump 1b (bp);\n" - "2:\n":"=a"(dest), "=a"(src), "=da"(n), "=d"(temp) - :"0"(dest), "1"(src), "2"(n), "3"(temp) - :"memory"); - - return xdest; -} - -int strcmp(const char *cs, const char *ct) -{ - char __res1, __res2; - - __asm__("1:\t%2 = B[%0++] (Z);\n\t" /* get *cs */ - "%3 = B[%1++] (Z);\n\t" /* get *ct */ - "CC = %2 == %3;\n\t" /* compare a byte */ - "if ! cc jump 2f;\n\t" /* not equal, break out */ - "CC = %2;\n\t" /* at end of cs? */ - "if cc jump 1b (bp);\n\t" /* no, keep going */ - "jump.s 3f;\n" /* strings are equal */ - "2:\t%2 = %2 - %3;\n" /* *cs - *ct */ - "3:\n": "=a"(cs), "=a"(ct), "=d"(__res1), "=d"(__res2) - : "0"(cs), "1"(ct)); - - return __res1; -} - -int strncmp(const char *cs, const char *ct, size_t count) -{ - char __res1, __res2; - - if (!count) - return 0; - - __asm__("1:\t%3 = B[%0++] (Z);\n\t" /* get *cs */ - "%4 = B[%1++] (Z);\n\t" /* get *ct */ - "CC = %3 == %4;\n\t" /* compare a byte */ - "if ! cc jump 3f;\n\t" /* not equal, break out */ - "CC = %3;\n\t" /* at end of cs? */ - "if ! cc jump 4f;\n\t" /* yes, all done */ - "%2 += -1;\n\t" /* no, adjust count */ - "CC = %2 == 0;\n\t" "if ! cc jump 1b;\n" /* more to do, keep going */ - "2:\t%3 = 0;\n\t" /* strings are equal */ - "jump.s 4f;\n" "3:\t%3 = %3 - %4;\n" /* *cs - *ct */ - "4:": "=a"(cs), "=a"(ct), "=da"(count), "=d"(__res1), - "=d"(__res2) - : "0"(cs), "1"(ct), "2"(count)); - - return __res1; -} - -#ifndef pMDMA_D0_IRQ_STATUS -# define pMDMA_D0_IRQ_STATUS pMDMA1_D0_IRQ_STATUS -# define pMDMA_D0_START_ADDR pMDMA1_D0_START_ADDR -# define pMDMA_D0_X_COUNT pMDMA1_D0_X_COUNT -# define pMDMA_D0_X_MODIFY pMDMA1_D0_X_MODIFY -# define pMDMA_D0_CONFIG pMDMA1_D0_CONFIG -# define pMDMA_S0_IRQ_STATUS pMDMA1_S0_IRQ_STATUS -# define pMDMA_S0_START_ADDR pMDMA1_S0_START_ADDR -# define pMDMA_S0_X_COUNT pMDMA1_S0_X_COUNT -# define pMDMA_S0_X_MODIFY pMDMA1_S0_X_MODIFY -# define pMDMA_S0_CONFIG pMDMA1_S0_CONFIG -#endif - -static void *dma_memcpy(void *dest, const void *src, size_t count) -{ - *pMDMA_D0_IRQ_STATUS = DMA_DONE | DMA_ERR; - - /* Copy sram functions from sdram to sram */ - /* Setup destination start address */ - *pMDMA_D0_START_ADDR = (volatile void **)dest; - /* Setup destination xcount */ - *pMDMA_D0_X_COUNT = count; - /* Setup destination xmodify */ - *pMDMA_D0_X_MODIFY = 1; - - /* Setup Source start address */ - *pMDMA_S0_START_ADDR = (volatile void **)src; - /* Setup Source xcount */ - *pMDMA_S0_X_COUNT = count; - /* Setup Source xmodify */ - *pMDMA_S0_X_MODIFY = 1; - - /* Enable source DMA */ - *pMDMA_S0_CONFIG = (DMAEN); - SSYNC(); - - *pMDMA_D0_CONFIG = (WNR | DMAEN); - - while (*pMDMA_D0_IRQ_STATUS & DMA_RUN) { - *pMDMA_D0_IRQ_STATUS |= (DMA_DONE | DMA_ERR); - } - *pMDMA_D0_IRQ_STATUS |= (DMA_DONE | DMA_ERR); - - dest += count; - src += count; - return dest; -} - -/* - * memcpy - Copy one area of memory to another - * @dest: Where to copy to - * @src: Where to copy from - * @count: The size of the area. - * - * You should not use this function to access IO space, use memcpy_toio() - * or memcpy_fromio() instead. - */ -extern void *memcpy_ASM(void *dest, const void *src, size_t count); -void *memcpy(void *dest, const void *src, size_t count) -{ - char *tmp = (char *) dest, *s = (char *) src; - - if (dcache_status()) { - blackfin_dcache_flush_range(src, src+count); - } - /* L1_INST_SRAM can only be accessed via dma */ - if ((tmp >= (char *)L1_INST_SRAM) && (tmp < (char *)L1_INST_SRAM_END)) { - /* L1 is the destination */ - dma_memcpy(dest,src,count); - } else if ((s >= (char *)L1_INST_SRAM) && (s < (char *)L1_INST_SRAM_END)) { - /* L1 is the source */ - dma_memcpy(dest,src,count); - - if (icache_status()) { - blackfin_icache_flush_range(dest, dest+count); - } - if (dcache_status()) { - blackfin_dcache_invalidate_range(dest, dest+count); - } - } else { - memcpy_ASM(dest,src,count); - } - return dest; -} diff --git a/lib_blackfin/blackfin_board.h b/lib_blackfin/blackfin_board.h deleted file mode 100644 index 1353421..0000000 --- a/lib_blackfin/blackfin_board.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * U-boot - blackfin_board.h - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef __BLACKFIN_BOARD_H__ -#define __BLACKFIN_BOARD_H__ - -#include <version.h> - -extern void timer_init(void); -extern void init_IRQ(void); -extern void rtc_init(void); - -extern ulong uboot_end_data; -extern ulong uboot_end; - -ulong monitor_flash_len; - - -#define VERSION_STRING_SIZE 150 /* including 40 bytes buffer to change any string */ -#define VERSION_STRING_FORMAT "%s (%s - %s)\n" -#define VERSION_STRING U_BOOT_VERSION, __DATE__, __TIME__ - -char version_string[VERSION_STRING_SIZE]; - -int *g_addr; -static ulong mem_malloc_start; -static ulong mem_malloc_end; -static ulong mem_malloc_brk; -extern char _sram_in_sdram_start[]; -extern char _sram_inst_size[]; -#ifdef DEBUG -static void display_global_data(void); -#endif - -/* definitions used to check the SMC card availability */ -#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE -#define UPPER_BYTE_MASK 0xFF00 -#define SMC_IDENT 0x3300 - -#endif diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c index 2a5a2fc..43d8be8 100644 --- a/lib_blackfin/board.c +++ b/lib_blackfin/board.c @@ -1,54 +1,50 @@ /* * U-boot - board.c First C file to be called contains init routines * - * Copyright (c) 2005-2007 Analog Devices Inc. + * Copyright (c) 2005-2008 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <common.h> #include <command.h> -#include <malloc.h> #include <devices.h> -#include <version.h> -#include <net.h> #include <environment.h> #include <i2c.h> -#include "blackfin_board.h" +#include <malloc.h> +#include <net.h> +#include <version.h> + #include <asm/cplb.h> -#include "../drivers/net/smc91111.h" +#include <asm/mach-common/bits/mpu.h> -#if defined(CONFIG_BF537)&&defined(CONFIG_POST) +#ifdef CONFIG_CMD_NAND +#include <nand.h> /* cannot even include nand.h if it isnt configured */ +#endif + +#if defined(CONFIG_POST) #include <post.h> int post_flag; #endif DECLARE_GLOBAL_DATA_PTR; -#ifndef CFG_NO_FLASH -extern flash_info_t flash_info[]; +const char version_string[] = U_BOOT_VERSION " (" __DATE__ " - " __TIME__ ")"; + +__attribute__((always_inline)) +static inline void serial_early_puts(const char *s) +{ +#ifdef CONFIG_DEBUG_EARLY_SERIAL + serial_puts("Early: "); + serial_puts(s); #endif +} -static inline u_long get_vco(void) +/* Get the input voltage */ +static u_long get_vco(void) { u_long msel; u_long vco; @@ -63,7 +59,7 @@ static inline u_long get_vco(void) return vco; } -/*Get the Core clock*/ +/* Get the Core clock */ u_long get_cclk(void) { u_long csel, ssel; @@ -91,154 +87,152 @@ u_long get_sclk(void) return get_vco() / ssel; } +static void *mem_malloc_start, *mem_malloc_end, *mem_malloc_brk; + static void mem_malloc_init(void) { - mem_malloc_start = CFG_MALLOC_BASE; - mem_malloc_end = (CFG_MALLOC_BASE + CFG_MALLOC_LEN); + mem_malloc_start = (void *)CFG_MALLOC_BASE; + mem_malloc_end = (void *)(CFG_MALLOC_BASE + CFG_MALLOC_LEN); mem_malloc_brk = mem_malloc_start; - memset((void *)mem_malloc_start, 0, mem_malloc_end - mem_malloc_start); + memset(mem_malloc_start, 0, mem_malloc_end - mem_malloc_start); } void *sbrk(ptrdiff_t increment) { - ulong old = mem_malloc_brk; - ulong new = old + increment; + void *old = mem_malloc_brk; + void *new = old + increment; + + if (new < mem_malloc_start || new > mem_malloc_end) + return NULL; - if ((new < mem_malloc_start) || (new > mem_malloc_end)) { - return (NULL); - } mem_malloc_brk = new; - return ((void *)old); + return old; } static int display_banner(void) { - sprintf(version_string, VERSION_STRING_FORMAT, VERSION_STRING); - printf("%s\n", version_string); + printf("\n\n%s\n\n", version_string); printf("CPU: ADSP " MK_STR(CONFIG_BFIN_CPU) " (Detected Rev: 0.%d)\n", bfin_revid()); - return (0); -} - -static void display_flash_config(ulong size) -{ - puts("FLASH: "); - print_size(size, "\n"); - return; + return 0; } static int init_baudrate(void) { - char tmp[64]; - int i = getenv_r("baudrate", tmp, sizeof(tmp)); + char baudrate[15]; + int i = getenv_r("baudrate", baudrate, sizeof(baudrate)); gd->bd->bi_baudrate = gd->baudrate = (i > 0) - ? (int)simple_strtoul(tmp, NULL, 10) + ? simple_strtoul(baudrate, NULL, 10) : CONFIG_BAUDRATE; - return (0); + return 0; } -#ifdef DEBUG static void display_global_data(void) { +#ifdef CONFIG_DEBUG_EARLY_SERIAL bd_t *bd; bd = gd->bd; - printf("--flags:%x\n", gd->flags); - printf("--board_type:%x\n", gd->board_type); - printf("--baudrate:%x\n", gd->baudrate); - printf("--have_console:%x\n", gd->have_console); - printf("--ram_size:%x\n", gd->ram_size); - printf("--reloc_off:%x\n", gd->reloc_off); - printf("--env_addr:%x\n", gd->env_addr); - printf("--env_valid:%x\n", gd->env_valid); - printf("--bd:%x %x\n", gd->bd, bd); - printf("---bi_baudrate:%x\n", bd->bi_baudrate); - printf("---bi_ip_addr:%x\n", bd->bi_ip_addr); - printf("---bi_enetaddr:%x %x %x %x %x %x\n", - bd->bi_enetaddr[0], - bd->bi_enetaddr[1], - bd->bi_enetaddr[2], - bd->bi_enetaddr[3], bd->bi_enetaddr[4], bd->bi_enetaddr[5]); - printf("---bi_arch_number:%x\n", bd->bi_arch_number); - printf("---bi_boot_params:%x\n", bd->bi_boot_params); - printf("---bi_memstart:%x\n", bd->bi_memstart); - printf("---bi_memsize:%x\n", bd->bi_memsize); - printf("---bi_flashstart:%x\n", bd->bi_flashstart); - printf("---bi_flashsize:%x\n", bd->bi_flashsize); - printf("---bi_flashoffset:%x\n", bd->bi_flashoffset); - printf("--jt:%x *:%x\n", gd->jt, *(gd->jt)); -} + printf(" gd: %x\n", gd); + printf(" |-flags: %x\n", gd->flags); + printf(" |-board_type: %x\n", gd->board_type); + printf(" |-baudrate: %i\n", gd->baudrate); + printf(" |-have_console: %x\n", gd->have_console); + printf(" |-ram_size: %x\n", gd->ram_size); + printf(" |-reloc_off: %x\n", gd->reloc_off); + printf(" |-env_addr: %x\n", gd->env_addr); + printf(" |-env_valid: %x\n", gd->env_valid); + printf(" |-jt(%x): %x\n", gd->jt, *(gd->jt)); + printf(" \\-bd: %x\n", gd->bd); + printf(" |-bi_baudrate: %x\n", bd->bi_baudrate); + printf(" |-bi_ip_addr: %x\n", bd->bi_ip_addr); + printf(" |-bi_enetaddr: %x %x %x %x %x %x\n", + bd->bi_enetaddr[0], bd->bi_enetaddr[1], + bd->bi_enetaddr[2], bd->bi_enetaddr[3], + bd->bi_enetaddr[4], bd->bi_enetaddr[5]); + printf(" |-bi_boot_params: %x\n", bd->bi_boot_params); + printf(" |-bi_memstart: %x\n", bd->bi_memstart); + printf(" |-bi_memsize: %x\n", bd->bi_memsize); + printf(" |-bi_flashstart: %x\n", bd->bi_flashstart); + printf(" |-bi_flashsize: %x\n", bd->bi_flashsize); + printf(" \\-bi_flashoffset: %x\n", bd->bi_flashoffset); #endif +} -/* we cover everything with 4 meg pages, and need an extra for L1 */ -unsigned int icplb_table[page_descriptor_table_size][2]; -unsigned int dcplb_table[page_descriptor_table_size][2]; - +#define CPLB_PAGE_SIZE (4 * 1024 * 1024) +#define CPLB_PAGE_MASK (~(CPLB_PAGE_SIZE - 1)) void init_cplbtables(void) { - int i, j; - - j = 0; - icplb_table[j][0] = 0xFFA00000; - icplb_table[j][1] = L1_IMEMORY; - j++; - - for (i = 0; i < CONFIG_MEM_SIZE / 4; i++) { - icplb_table[j][0] = (i * 4 * 1024 * 1024); - if (i * 4 * 1024 * 1024 <= CFG_MONITOR_BASE - && (i + 1) * 4 * 1024 * 1024 >= CFG_MONITOR_BASE) { - icplb_table[j][1] = SDRAM_IKERNEL; - } else { - icplb_table[j][1] = SDRAM_IGENERIC; - } - j++; + volatile uint32_t *ICPLB_ADDR, *ICPLB_DATA; + volatile uint32_t *DCPLB_ADDR, *DCPLB_DATA; + uint32_t extern_memory; + size_t i; + + void icplb_add(uint32_t addr, uint32_t data) + { + *(ICPLB_ADDR + i) = addr; + *(ICPLB_DATA + i) = data; } -#if defined(CONFIG_BF561) - /* MAC space */ - icplb_table[j][0] = 0x2C000000; - icplb_table[j][1] = SDRAM_INON_CHBL; - j++; - /* Async Memory space */ - for (i = 0; i < 3; i++) { - icplb_table[j][0] = 0x20000000 + i * 4 * 1024 * 1024; - icplb_table[j][1] = SDRAM_INON_CHBL; - j++; - } -#else - icplb_table[j][0] = 0x20000000; - icplb_table[j][1] = SDRAM_INON_CHBL; -#endif - j = 0; - dcplb_table[j][0] = 0xFF800000; - dcplb_table[j][1] = L1_DMEMORY; - j++; - - for (i = 0; i < CONFIG_MEM_SIZE / 4; i++) { - dcplb_table[j][0] = (i * 4 * 1024 * 1024); - if (i * 4 * 1024 * 1024 <= CFG_MONITOR_BASE - && (i + 1) * 4 * 1024 * 1024 >= CFG_MONITOR_BASE) { - dcplb_table[j][1] = SDRAM_DKERNEL; - } else { - dcplb_table[j][1] = SDRAM_DGENERIC; - } - j++; + void dcplb_add(uint32_t addr, uint32_t data) + { + *(DCPLB_ADDR + i) = addr; + *(DCPLB_DATA + i) = data; } -#if defined(CONFIG_BF561) - /* MAC space */ - dcplb_table[j][0] = 0x2C000000; - dcplb_table[j][1] = SDRAM_EBIU; - j++; - - /* Flash space */ - for (i = 0; i < 3; i++) { - dcplb_table[j][0] = 0x20000000 + i * 4 * 1024 * 1024; - dcplb_table[j][1] = SDRAM_EBIU; - j++; + /* populate a few common entries ... we'll let + * the memory map and cplb exception handler do + * the rest of the work. + */ + i = 0; + ICPLB_ADDR = (uint32_t *)ICPLB_ADDR0; + ICPLB_DATA = (uint32_t *)ICPLB_DATA0; + DCPLB_ADDR = (uint32_t *)DCPLB_ADDR0; + DCPLB_DATA = (uint32_t *)DCPLB_DATA0; + + icplb_add(0xFFA00000, L1_IMEMORY); + dcplb_add(0xFF800000, L1_DMEMORY); + ++i; + + icplb_add(CFG_MONITOR_BASE & CPLB_PAGE_MASK, SDRAM_IKERNEL); + dcplb_add(CFG_MONITOR_BASE & CPLB_PAGE_MASK, SDRAM_DKERNEL); + ++i; + + /* If the monitor crosses a 4 meg boundary, we'll need + * to lock two entries for it. + */ + if ((CFG_MONITOR_BASE & CPLB_PAGE_MASK) != ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & CPLB_PAGE_MASK)) { + icplb_add((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & CPLB_PAGE_MASK, SDRAM_IKERNEL); + dcplb_add((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & CPLB_PAGE_MASK, SDRAM_DKERNEL); + ++i; } -#else - dcplb_table[j][0] = 0x20000000; - dcplb_table[j][1] = SDRAM_EBIU; + + icplb_add(0x20000000, SDRAM_INON_CHBL); + dcplb_add(0x20000000, SDRAM_EBIU); + ++i; + + /* Add entries for the rest of external RAM up to the bootrom */ + extern_memory = 0; + +#ifdef CONFIG_DEBUG_NULL_PTR + icplb_add(extern_memory, (SDRAM_IKERNEL & ~PAGE_SIZE_MASK) | PAGE_SIZE_1KB); + dcplb_add(extern_memory, (SDRAM_DKERNEL & ~PAGE_SIZE_MASK) | PAGE_SIZE_1KB); + ++i; + icplb_add(extern_memory, SDRAM_IKERNEL); + dcplb_add(extern_memory, SDRAM_DKERNEL); + extern_memory += CPLB_PAGE_SIZE; + ++i; #endif + + while (i < 16 && extern_memory < (CFG_MONITOR_BASE & CPLB_PAGE_MASK)) { + icplb_add(extern_memory, SDRAM_IGENERIC); + dcplb_add(extern_memory, SDRAM_DGENERIC); + extern_memory += CPLB_PAGE_SIZE; + ++i; + } + while (i < 16) { + icplb_add(0, 0); + dcplb_add(0, 0); + ++i; + } } /* @@ -254,14 +248,37 @@ void init_cplbtables(void) * "continue" and != 0 means "fatal error, hang the system". */ +extern int exception_init(void); +extern int irq_init(void); +extern int rtc_init(void); +extern int timer_init(void); + void board_init_f(ulong bootflag) { ulong addr; bd_t *bd; - int i; +#ifdef CONFIG_BOARD_EARLY_INIT_F + serial_early_puts("Board early init flash\n"); + board_early_init_f(); +#endif + + serial_early_puts("Init CPLB tables\n"); init_cplbtables(); + serial_early_puts("Exceptions setup\n"); + exception_init(); + +#ifndef CONFIG_ICACHE_OFF + serial_early_puts("Turn on ICACHE\n"); + icache_enable(); +#endif +#ifndef CONFIG_DCACHE_OFF + serial_early_puts("Turn on DCACHE\n"); + dcache_enable(); +#endif + + serial_early_puts("Init global data\n"); gd = (gd_t *) (CFG_GBL_DATA_ADDR); memset((void *)gd, 0, sizeof(gd_t)); @@ -274,41 +291,44 @@ void board_init_f(ulong bootflag) gd->bd = bd; memset((void *)bd, 0, sizeof(bd_t)); + bd->bi_r_version = version_string; + bd->bi_cpu = MK_STR(CONFIG_BFIN_CPU); + bd->bi_board_name = BFIN_BOARD_NAME; + bd->bi_vco = get_vco(); + bd->bi_cclk = get_cclk(); + bd->bi_sclk = get_sclk(); + /* Initialize */ - init_IRQ(); - env_init(); /* initialize environment */ - init_baudrate(); /* initialze baudrate settings */ - serial_init(); /* serial communications setup */ + serial_early_puts("IRQ init\n"); + irq_init(); + serial_early_puts("Environment init\n"); + env_init(); + serial_early_puts("Baudrate init\n"); + init_baudrate(); + serial_early_puts("Serial init\n"); + serial_init(); + serial_early_puts("Console init flash\n"); console_init_f(); -#ifdef CONFIG_ICACHE_ON - icache_enable(); -#endif -#ifdef CONFIG_DCACHE_ON - dcache_enable(); -#endif - display_banner(); /* say that we are here */ - - for (i = 0; i < page_descriptor_table_size; i++) { - debug - ("data (%02i)= 0x%08x : 0x%08x intr = 0x%08x : 0x%08x\n", - i, dcplb_table[i][0], dcplb_table[i][1], icplb_table[i][0], - icplb_table[i][1]); - } + serial_early_puts("End of early debugging\n"); + display_banner(); checkboard(); -#if defined(CONFIG_RTC_BF533) && defined(CONFIG_CMD_DATE) +#if defined(CONFIG_RTC_BFIN) && defined(CONFIG_CMD_DATE) rtc_init(); #endif timer_init(); + printf("Clock: VCO: %lu MHz, Core: %lu MHz, System: %lu MHz\n", get_vco() / 1000000, get_cclk() / 1000000, get_sclk() / 1000000); - printf("SDRAM: "); + + printf("RAM: "); print_size(initdram(0), "\n"); -#if defined(CONFIG_BF537)&&defined(CONFIG_POST) +#if defined(CONFIG_POST) post_init_f(); post_bootmode_init(); post_run(NULL, POST_ROM | post_bootmode_get(0)); #endif + board_init_r((gd_t *) gd, 0x20000010); } @@ -324,25 +344,25 @@ static int init_func_i2c(void) void board_init_r(gd_t * id, ulong dest_addr) { - ulong size; extern void malloc_bin_reloc(void); - char *s, *e; + char *s; bd_t *bd; - int i; gd = id; gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ bd = gd->bd; -#if defined(CONFIG_BF537) && defined(CONFIG_POST) +#if defined(CONFIG_POST) post_output_backlog(); post_reloc(); #endif -#if (CONFIG_STAMP || CONFIG_BF537 || CONFIG_EZKIT561) && !defined(CFG_NO_FLASH) +#if !defined(CFG_NO_FLASH) /* There are some other pointer constants we must deal with */ /* configure available FLASH banks */ - size = flash_init(); - display_flash_config(size); + extern flash_info_t flash_info[]; + ulong size = flash_init(); + puts("Flash: "); + print_size(size, "\n"); flash_protect(FLAG_PROTECT_SET, CFG_FLASH_BASE, CFG_FLASH_BASE + 0x1ffff, &flash_info[0]); bd->bi_flashstart = CFG_FLASH_BASE; @@ -367,16 +387,34 @@ void board_init_r(gd_t * id, ulong dest_addr) /* relocate environment function pointers etc. */ env_relocate(); +#ifdef CONFIG_CMD_NET /* board MAC address */ s = getenv("ethaddr"); - for (i = 0; i < 6; ++i) { - bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0; - if (s) + if (s == NULL) { +# ifndef CONFIG_ETHADDR +# if 0 + if (!board_get_enetaddr(bd->bi_enetaddr)) { + char nid[20]; + sprintf(nid, "%02X:%02X:%02X:%02X:%02X:%02X", + bd->bi_enetaddr[0], bd->bi_enetaddr[1], + bd->bi_enetaddr[2], bd->bi_enetaddr[3], + bd->bi_enetaddr[4], bd->bi_enetaddr[5]); + setenv("ethaddr", nid); + } +# endif +# endif + } else { + int i; + char *e; + for (i = 0; i < 6; ++i) { + bd->bi_enetaddr[i] = simple_strtoul(s, &e, 16); s = (*e) ? e + 1 : e; + } } /* IP Address */ bd->bi_ip_addr = getenv_IPaddr("ipaddr"); +#endif /* Initialize devices */ devices_init(); @@ -386,16 +424,14 @@ void board_init_r(gd_t * id, ulong dest_addr) console_init_r(); /* Initialize from environment */ - if ((s = getenv("loadaddr")) != NULL) { + if ((s = getenv("loadaddr")) != NULL) load_addr = simple_strtoul(s, NULL, 16); - } -#if defined(CONFIG_CMD_NET) - if ((s = getenv("bootfile")) != NULL) { +#ifdef CONFIG_CMD_NET + if ((s = getenv("bootfile")) != NULL) copy_filename(BootFile, s, sizeof(BootFile)); - } #endif -#if defined(CONFIG_CMD_NAND) +#ifdef CONFIG_CMD_NAND puts("NAND: "); nand_init(); /* go init the NAND */ #endif @@ -406,47 +442,36 @@ void board_init_r(gd_t * id, ulong dest_addr) #endif #ifdef CONFIG_CMD_NET - printf("Net: "); - eth_initialize(bd); -#endif - -#ifdef CONFIG_DRIVER_SMC91111 -#ifdef SHARED_RESOURCES - /* Switch to Ethernet */ - swap_to(ETHERNET); + printf("Net: "); + eth_initialize(gd->bd); + if (getenv("ethaddr")) + printf("MAC: %02X:%02X:%02X:%02X:%02X:%02X\n", + bd->bi_enetaddr[0], bd->bi_enetaddr[1], bd->bi_enetaddr[2], + bd->bi_enetaddr[3], bd->bi_enetaddr[4], bd->bi_enetaddr[5]); #endif - if ((SMC_inw(BANK_SELECT) & UPPER_BYTE_MASK) != SMC_IDENT) { - printf("ERROR: Can't find SMC91111 at address %x\n", - SMC_BASE_ADDRESS); - } else { - printf("Net: SMC91111 at 0x%08X\n", SMC_BASE_ADDRESS); - } -#ifdef SHARED_RESOURCES - swap_to(FLASH); -#endif -#endif #if defined(CONFIG_SOFT_I2C) || defined(CONFIG_HARD_I2C) init_func_i2c(); #endif -#ifdef DEBUG display_global_data(); -#endif -#if defined(CONFIG_BF537) && defined(CONFIG_POST) +#if defined(CONFIG_POST) if (post_flag) post_run(NULL, POST_RAM | post_bootmode_get(0)); #endif /* main_loop() can return to retry autoboot, if so just run it again. */ - for (;;) { + for (;;) main_loop(); - } } void hang(void) { puts("### ERROR ### Please RESET the board ###\n"); - for (;;) ; + while (1) + /* If a JTAG emulator is hooked up, we'll automatically trigger + * a breakpoint in it. If one isn't, this is just a NOP. + */ + asm("emuexcpt;"); } diff --git a/lib_blackfin/bootm.c b/lib_blackfin/bootm.c index 1ea80f4..bea11ed 100644 --- a/lib_blackfin/bootm.c +++ b/lib_blackfin/bootm.c @@ -1,52 +1,39 @@ /* - * U-boot - bf533_linux.c + * U-boot - bootm.c - misc boot helper functions * - * Copyright (c) 2005-2007 Analog Devices Inc. + * Copyright (c) 2005-2008 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ -/* Dummy functions, currently not in Use */ - #include <common.h> #include <command.h> #include <image.h> -#include <zlib.h> -#include <asm/byteorder.h> +#include <asm/blackfin.h> -#define LINUX_MAX_ENVS 256 -#define LINUX_MAX_ARGS 256 - -#define CMD_LINE_ADDR 0xFF900000 /* L1 scratchpad */ +extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); #ifdef SHARED_RESOURCES extern void swap_to(int device_id); #endif -extern void flush_instruction_cache(void); -extern void flush_data_cache(void); -static char *make_command_line(void); +static char *make_command_line(void) +{ + char *dest = (char *)CMD_LINE_ADDR; + char *bootargs = getenv("bootargs"); + + if (bootargs == NULL) + return NULL; + + strncpy(dest, bootargs, 0x1000); + dest[0xfff] = 0; + return dest; +} -void do_bootm_linux(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], +void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], bootm_headers_t *images) { int (*appl) (char *cmdline); @@ -54,7 +41,7 @@ void do_bootm_linux(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], ulong ep = 0; if (!images->autostart) - return ; + return; #ifdef SHARED_RESOURCES swap_to(FLASH); @@ -80,33 +67,13 @@ void do_bootm_linux(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], printf("Starting Kernel at = %x\n", appl); cmdline = make_command_line(); - if (icache_status()) { - flush_instruction_cache(); - icache_disable(); - } - if (dcache_status()) { - flush_data_cache(); - dcache_disable(); - } + icache_disable(); + dcache_disable(); (*appl) (cmdline); /* does not return */ return; -error: + error: if (images->autostart) do_reset (cmdtp, flag, argc, argv); - return; -} - -char *make_command_line(void) -{ - char *dest = (char *)CMD_LINE_ADDR; - char *bootargs; - - if ((bootargs = getenv("bootargs")) == NULL) - return NULL; - - strncpy(dest, bootargs, 0x1000); - dest[0xfff] = 0; - return dest; } diff --git a/lib_blackfin/cache.c b/lib_blackfin/cache.c index 6fc4983..c2f6e28 100644 --- a/lib_blackfin/cache.c +++ b/lib_blackfin/cache.c @@ -1,45 +1,26 @@ /* * U-boot - cache.c * - * Copyright (c) 2005-2007 Analog Devices Inc. + * Copyright (c) 2005-2008 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ -/* for now: just dummy functions to satisfy the linker */ -#include <config.h> #include <common.h> #include <asm/blackfin.h> -#include "cache.h" -void flush_cache(unsigned long dummy1, unsigned long dummy2) +void flush_cache(unsigned long addr, unsigned long size) { - if (dummy1 >= 0xE0000000) + /* no need to flush stuff in on chip memory (L1/L2/etc...) */ + if (addr >= 0xE0000000) return; if (icache_status()) - blackfin_icache_flush_range((void*)dummy1, (void*)(dummy1 + dummy2)); - if (dcache_status()) - blackfin_dcache_flush_range((void*)dummy1, (void*)(dummy1 + dummy2)); + blackfin_icache_flush_range((void *)addr, (void *)(addr + size)); - return; + if (dcache_status()) + blackfin_dcache_flush_range((void *)addr, (void *)(addr + size)); } diff --git a/lib_blackfin/cache.h b/lib_blackfin/cache.h deleted file mode 100644 index 3ea6809..0000000 --- a/lib_blackfin/cache.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * U-boot - prototypes for cache handling functions. - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _LIB_BLACKFIN_CACHE_H_ -#define _LIB_BLACKFIN_CACHE_H_ - -extern void blackfin_icache_flush_range(const void *, const void *); -extern void blackfin_dcache_flush_range(const void *, const void *); -extern void blackfin_dcache_invalidate_range(const void *, const void *); - -#endif diff --git a/lib_blackfin/string.c b/lib_blackfin/string.c new file mode 100644 index 0000000..6887c93 --- /dev/null +++ b/lib_blackfin/string.c @@ -0,0 +1,203 @@ +/* + * U-boot - string.c Contains library routines. + * + * Copyright (c) 2005-2007 Analog Devices Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/blackfin.h> +#include <asm/io.h> +#include <asm/mach-common/bits/dma.h> + +char *strcpy(char *dest, const char *src) +{ + char *xdest = dest; + char temp = 0; + + __asm__ __volatile__ ( + "1:\t%2 = B [%1++] (Z);\n\t" + "B [%0++] = %2;\n\t" + "CC = %2;\n\t" + "if cc jump 1b (bp);\n" + : "=a"(dest), "=a"(src), "=d"(temp) + : "0"(dest), "1"(src), "2"(temp) + : "memory"); + + return xdest; +} + +char *strncpy(char *dest, const char *src, size_t n) +{ + char *xdest = dest; + char temp = 0; + + if (n == 0) + return xdest; + + __asm__ __volatile__ ( + "1:\t%3 = B [%1++] (Z);\n\t" + "B [%0++] = %3;\n\t" + "CC = %3;\n\t" + "if ! cc jump 2f;\n\t" + "%2 += -1;\n\t" + "CC = %2 == 0;\n\t" + "if ! cc jump 1b (bp);\n" + "2:\n" + : "=a"(dest), "=a"(src), "=da"(n), "=d"(temp) + : "0"(dest), "1"(src), "2"(n), "3"(temp) + : "memory"); + + return xdest; +} + +int strcmp(const char *cs, const char *ct) +{ + char __res1, __res2; + + __asm__ ( + "1:\t%2 = B[%0++] (Z);\n\t" /* get *cs */ + "%3 = B[%1++] (Z);\n\t" /* get *ct */ + "CC = %2 == %3;\n\t" /* compare a byte */ + "if ! cc jump 2f;\n\t" /* not equal, break out */ + "CC = %2;\n\t" /* at end of cs? */ + "if cc jump 1b (bp);\n\t" /* no, keep going */ + "jump.s 3f;\n" /* strings are equal */ + "2:\t%2 = %2 - %3;\n" /* *cs - *ct */ + "3:\n" + : "=a"(cs), "=a"(ct), "=d"(__res1), "=d"(__res2) + : "0"(cs), "1"(ct)); + + return __res1; +} + +int strncmp(const char *cs, const char *ct, size_t count) +{ + char __res1, __res2; + + if (!count) + return 0; + + __asm__( + "1:\t%3 = B[%0++] (Z);\n\t" /* get *cs */ + "%4 = B[%1++] (Z);\n\t" /* get *ct */ + "CC = %3 == %4;\n\t" /* compare a byte */ + "if ! cc jump 3f;\n\t" /* not equal, break out */ + "CC = %3;\n\t" /* at end of cs? */ + "if ! cc jump 4f;\n\t" /* yes, all done */ + "%2 += -1;\n\t" /* no, adjust count */ + "CC = %2 == 0;\n\t" "if ! cc jump 1b;\n" /* more to do, keep going */ + "2:\t%3 = 0;\n\t" /* strings are equal */ + "jump.s 4f;\n" "3:\t%3 = %3 - %4;\n" /* *cs - *ct */ + "4:" + : "=a"(cs), "=a"(ct), "=da"(count), "=d"(__res1), "=d"(__res2) + : "0"(cs), "1"(ct), "2"(count)); + + return __res1; +} + +#ifdef bfin_write_MDMA1_D0_IRQ_STATUS +# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS +# define bfin_write_MDMA_D0_START_ADDR bfin_write_MDMA1_D0_START_ADDR +# define bfin_write_MDMA_D0_X_COUNT bfin_write_MDMA1_D0_X_COUNT +# define bfin_write_MDMA_D0_X_MODIFY bfin_write_MDMA1_D0_X_MODIFY +# define bfin_write_MDMA_D0_CONFIG bfin_write_MDMA1_D0_CONFIG +# define bfin_write_MDMA_S0_START_ADDR bfin_write_MDMA1_S0_START_ADDR +# define bfin_write_MDMA_S0_X_COUNT bfin_write_MDMA1_S0_X_COUNT +# define bfin_write_MDMA_S0_X_MODIFY bfin_write_MDMA1_S0_X_MODIFY +# define bfin_write_MDMA_S0_CONFIG bfin_write_MDMA1_S0_CONFIG +# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS +# define bfin_read_MDMA_D0_IRQ_STATUS bfin_read_MDMA1_D0_IRQ_STATUS +#endif +static void *dma_memcpy(void *dst, const void *src, size_t count) +{ + if (dcache_status()) + blackfin_dcache_flush_range(src, src + count); + + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + /* Copy sram functions from sdram to sram */ + /* Setup destination start address */ + bfin_write_MDMA_D0_START_ADDR(dst); + /* Setup destination xcount */ + bfin_write_MDMA_D0_X_COUNT(count); + /* Setup destination xmodify */ + bfin_write_MDMA_D0_X_MODIFY(1); + + /* Setup Source start address */ + bfin_write_MDMA_S0_START_ADDR(src); + /* Setup Source xcount */ + bfin_write_MDMA_S0_X_COUNT(count); + /* Setup Source xmodify */ + bfin_write_MDMA_S0_X_MODIFY(1); + + /* Enable source DMA */ + bfin_write_MDMA_S0_CONFIG(DMAEN); + SSYNC(); + + bfin_write_MDMA_D0_CONFIG(WNR | DMAEN); + + while (bfin_read_MDMA_D0_IRQ_STATUS() & DMA_RUN) + bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() | DMA_DONE | DMA_ERR); + bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() | DMA_DONE | DMA_ERR); + + if (icache_status()) + blackfin_icache_flush_range(dst, dst + count); + + if (dcache_status()) + blackfin_dcache_invalidate_range(dst, dst + count); + + return dst; +} + +/* + * memcpy - Copy one area of memory to another + * @dest: Where to copy to + * @src: Where to copy from + * @count: The size of the area. + * + * We need to have this wrapper in memcpy() as common code may call memcpy() + * to load up L1 regions. Consider loading an ELF which has sections with + * LMA's pointing to L1. The common code ELF loader will simply use memcpy() + * to move the ELF's sections into the right place. We need to catch that + * here and redirect to dma_memcpy(). + */ +extern void *memcpy_ASM(void *dst, const void *src, size_t count); +void *memcpy(void *dst, const void *src, size_t count) +{ + if (!count) + return dst; + + if (addr_bfin_on_chip_mem(dst)) { + /* L1 is the destination */ + return dma_memcpy(dst, src, count); + + } else if (addr_bfin_on_chip_mem(src)) { + /* L1 is the source */ + return dma_memcpy(dst, src, count); + + } else + /* No L1 is involved, so just call regular memcpy */ + return memcpy_ASM(dst, src, count); +} diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 3038302..7d33914 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -120,6 +120,11 @@ DECLARE_GLOBAL_DATA_PTR; #define TOTAL_MALLOC_LEN CFG_MALLOC_LEN #endif +#if !defined(CFG_MEM_TOP_HIDE) +#define CFG_MEM_TOP_HIDE 0 +#endif + +extern ulong _start; extern ulong __init_end; extern ulong _end; ulong monitor_flash_len; @@ -428,13 +433,26 @@ void board_init_f (ulong bootflag) * relocate the code and continue running from DRAM. * * Reserve memory at end of RAM for (top down in that order): + * - area that won't get touched by U-Boot and Linux (optional) * - kernel log buffer * - protected RAM * - LCD framebuffer * - monitor code * - board info struct */ - len = (ulong)&_end - CFG_MONITOR_BASE; + len = (ulong)&_end - (ulong)&_start + EXC_OFF_SYS_RESET; + + /* + * Subtract specified amount of memory to hide so that it won't + * get "touched" at all by U-Boot. By fixing up gd->ram_size + * the Linux kernel should now get passed the now "corrected" + * memory size and won't touch it either. This should work + * for arch/ppc and arch/powerpc. Only Linux board ports in + * arch/powerpc with bootwrapper support, that recalculate the + * memory size from the SDRAM controller setup will have to + * get fixed. + */ + gd->ram_size -= CFG_MEM_TOP_HIDE; #ifndef CONFIG_MAX_MEM_MAPPED #define CONFIG_MAX_MEM_MAPPED (256 << 20) @@ -876,7 +894,7 @@ void board_init_r (gd_t *id, ulong dest_addr) sc3_read_eeprom(); #endif -#ifdef CFG_ID_EEPROM +#if defined (CFG_ID_EEPROM) || defined (CFG_I2C_MAC_OFFSET) mac_read_from_eeprom(); #endif diff --git a/lib_sh/board.c b/lib_sh/board.c index 2cd60d7..883c381 100644 --- a/lib_sh/board.c +++ b/lib_sh/board.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2007 + * Copyright (C) 2007,2008 * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> * * This program is free software; you can redistribute it and/or @@ -95,6 +95,14 @@ static int sh_marubun_init(void) } #endif /* (CONFIG_CMD_IDE) */ +#if defined(CONFIG_PCI) +static int sh_pci_init(void) +{ + pci_init(); + return 0; +} +#endif /* CONFIG_PCI */ + static int sh_mem_env_init(void) { mem_malloc_init(); @@ -141,6 +149,9 @@ init_fnc_t *init_sequence[] = #if defined(CONFIG_CMD_NAND) sh_nand_init, /* Flash memory (NAND) init */ #endif +#if defined(CONFIG_PCI) + sh_pci_init, /* PCI Init */ +#endif devices_init, console_init_r, interrupt_init, diff --git a/net/bootp.c b/net/bootp.c index 89e30d2..0eeef57 100644 --- a/net/bootp.c +++ b/net/bootp.c @@ -879,7 +879,10 @@ static void DhcpSendRequestPkt(Bootp_t *bp_offer) iplen = BOOTP_HDR_SIZE - sizeof(bp->bp_vend) + extlen; NetSetIP(iphdr, 0xFFFFFFFFL, PORT_BOOTPS, PORT_BOOTPC, iplen); - debug ("Transmitting DHCPREQUEST packet: len = %d\n", pktlen); + debug ("Transmitting DHCPREQUEST packet: len = %d\n", pktlen); +#ifdef CONFIG_BOOTP_DHCP_REQUEST_DELAY + udelay(CONFIG_BOOTP_DHCP_REQUEST_DELAY); +#endif /* CONFIG_BOOTP_DHCP_REQUEST_DELAY */ NetSendPacket(NetTxPacket, pktlen); } @@ -60,10 +60,11 @@ extern int npe_initialize(bd_t *); extern int uec_initialize(int); extern int bfin_EMAC_initialize(bd_t *); extern int atstk1000_eth_initialize(bd_t *); +extern int greth_initialize(bd_t *); extern int atngw100_eth_initialize(bd_t *); extern int mcffec_initialize(bd_t*); extern int mcdmafec_initialize(bd_t*); -extern int at91cap9_eth_initialize(bd_t *); +extern int at91sam9_eth_initialize(bd_t *); #ifdef CONFIG_API extern void (*push_packet)(volatile void *, int); @@ -275,6 +276,9 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_ATSTK1000) atstk1000_eth_initialize(bis); #endif +#if defined(CONFIG_GRETH) + greth_initialize(bis); +#endif #if defined(CONFIG_ATNGW100) atngw100_eth_initialize(bis); #endif @@ -284,8 +288,8 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_FSLDMAFEC) mcdmafec_initialize(bis); #endif -#if defined(CONFIG_AT91CAP9) - at91cap9_eth_initialize(bis); +#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) + at91sam9_eth_initialize(bis); #endif if (!eth_devices) { |