diff options
-rw-r--r-- | cpu/ppc4xx/440spe_pcie.c | 36 | ||||
-rw-r--r-- | cpu/ppc4xx/440spe_pcie.h | 19 | ||||
-rwxr-xr-x | cpu/ppc4xx/traps.c | 11 | ||||
-rw-r--r-- | lib_ppc/extable.c | 2 |
4 files changed, 58 insertions, 10 deletions
diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c index 7b27e87..bf68cc1 100644 --- a/cpu/ppc4xx/440spe_pcie.c +++ b/cpu/ppc4xx/440spe_pcie.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2006 + * (C) Copyright 2006 - 2007 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * Copyright (c) 2005 Cisco Systems. All rights reserved. @@ -40,6 +40,34 @@ enum { LNKW_X8 = 0x8 }; +static inline int pcie_in_8(const volatile unsigned char __iomem *addr) +{ + int ret; + + PCIE_IN(lbzx, ret, addr); + + return ret; +} + +static inline int pcie_in_le16(const volatile unsigned short __iomem *addr) +{ + int ret; + + PCIE_IN(lhbrx, ret, addr) + + return ret; +} + +static inline unsigned pcie_in_le32(const volatile unsigned __iomem *addr) +{ + unsigned ret; + + PCIE_IN(lwbrx, ret, addr); + + return ret; +} + + static int pcie_read_config(struct pci_controller *hose, unsigned int devfn, int offset, int len, u32 *val) { @@ -55,13 +83,13 @@ static int pcie_read_config(struct pci_controller *hose, unsigned int devfn, switch (len) { case 1: - *val = in_8(hose->cfg_data + offset); + *val = pcie_in_8(hose->cfg_data + offset); break; case 2: - *val = in_le16((u16 *)(hose->cfg_data + offset)); + *val = pcie_in_le16((u16 *)(hose->cfg_data + offset)); break; default: - *val = in_le32((u32 *)(hose->cfg_data + offset)); + *val = pcie_in_le32((u32*)(hose->cfg_data + offset)); break; } return 0; diff --git a/cpu/ppc4xx/440spe_pcie.h b/cpu/ppc4xx/440spe_pcie.h index 2becc77..eb7cecf 100644 --- a/cpu/ppc4xx/440spe_pcie.h +++ b/cpu/ppc4xx/440spe_pcie.h @@ -145,8 +145,8 @@ #define PECFG_PIMEN 0x33c #define PECFG_PIM0LAL 0x340 #define PECFG_PIM0LAH 0x344 -#define PECFG_PIM1LAL 0x348 -#define PECFG_PIM1LAH 0x34c +#define PECFG_PIM1LAL 0x348 +#define PECFG_PIM1LAH 0x34c #define PECFG_PIM01SAL 0x350 #define PECFG_PIM01SAH 0x354 @@ -161,6 +161,21 @@ mtdcr(DCRN_SDR0_CFGADDR, offset); \ mtdcr(DCRN_SDR0_CFGDATA,data);}) +#define PCIE_IN(opcode, ret, addr) \ + __asm__ __volatile__( \ + "sync\n" \ + #opcode " %0,0,%1\n" \ + "1: twi 0,%0,0\n" \ + "isync\n" \ + "b 3f\n" \ + "2: li %0,-1\n" \ + "3:\n" \ + ".section __ex_table,\"a\"\n" \ + ".balign 4\n" \ + ".long 1b,2b\n" \ + ".previous\n" \ + : "=r" (ret) : "r" (addr), "m" (*addr)); + int ppc440spe_init_pcie(void); int ppc440spe_init_pcie_rootport(int port); void yucca_setup_pcie_fpga_rootpoint(int port); diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c index 2fcce3d..6b15a9e 100755 --- a/cpu/ppc4xx/traps.c +++ b/cpu/ppc4xx/traps.c @@ -151,12 +151,17 @@ MachineCheckException(struct pt_regs *regs) int uncorr_ecc = 0; #endif - /* Probing PCI using config cycles cause this exception - * when a device is not present. Catch it and return to - * the PCI exception handler. + /* Probing PCI(E) using config cycles may cause this exception + * when a device is not present. To gracefully recover in such + * scenarios config read/write routines need to be instrumented in + * order to return via fixup handler. For examples refer to + * pcie_in_8(), pcie_in_le16() and pcie_in_le32() */ if ((fixup = search_exception_table(regs->nip)) != 0) { regs->nip = fixup; + val = mfspr(MCSR); + /* Clear MCSR */ + mtspr(SPRN_MCSR, val); return; } diff --git a/lib_ppc/extable.c b/lib_ppc/extable.c index 8354411..2d995fa 100644 --- a/lib_ppc/extable.c +++ b/lib_ppc/extable.c @@ -89,7 +89,7 @@ search_exception_table(unsigned long addr) /* if the serial port does not hang in exception, printf can be used */ #if !defined(CFG_SERIAL_HANG_IN_EXCEPTION) if (ex_tab_message) - printf("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret); + debug("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret); #endif if (ret) return ret; |