diff options
57 files changed, 82 insertions, 258 deletions
@@ -3,6 +3,11 @@ Changes for U-Boot 1.1.3: ====================================================================== * Patch by Steven Scholz, 04 Apr 2005: + - remove all references to CONFIG_INIT_CRITICAL for ARM based boards + - introduce two new configuration options instead: + CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT + +* Patch by Steven Scholz, 04 Apr 2005: Make sure that MDIO clock does not exceed 2.5 MHz on AT91 * Fix timer code for ARM systems: make sure that udelay() does not @@ -2129,14 +2129,18 @@ Low Level (hardware related) configuration options: This only takes effect if the memory commands are activated globally (CFG_CMD_MEM). -- CONFIG_INIT_CRITICAL - [ARM only] If this variable is NOT defined, then - certain critical initializations (like setting up the - memory controller) are omitted. Normally this - variable MUST be defined for all boards. The only - exception is when U-Boot is loaded (to RAM) by some - other boot loader or by a debugger which performs - these intializations itself. +- CONFIG_SKIP_LOWLEVEL_INIT +- CONFIG_SKIP_RELOCATE_UBOOT + + [ARM only] If these variables are defined, then + certain low level initializations (like setting up + the memory controller) are omitted and/or U-Boot does + not relocate itself into RAM. + Normally these variables MUST NOT be defined. The + only exception is when U-Boot is loaded (to RAM) by + some other boot loader or by a debugger which + performs these intializations itself. + Building the Software: ====================== diff --git a/board/ns9750dev/platform.S b/board/ns9750dev/platform.S index 11f9aef..afcad15 100644 --- a/board/ns9750dev/platform.S +++ b/board/ns9750dev/platform.S @@ -34,7 +34,7 @@ #include <version.h> #if defined(CONFIG_NS9750DEV) -# ifdef CONFIG_INIT_CRITICAL +# ifndef CONFIG_SKIP_LOWLEVEL_INIT # include <./ns9750_sys.h> # include <./ns9750_mem.h> # endif @@ -74,7 +74,7 @@ _PHYS_FLASH: _CAS_LATENCY: .word 0x00022000 @ for CAS2 latency -#ifdef CONFIG_INIT_CRITICAL +#ifndef CONFIG_SKIP_LOWLEVEL_INIT .globl platformsetup platformsetup: @@ -295,4 +295,4 @@ _AHB_MONITOR_START: NS9750_SYS_AHB_MON_BATC_GEN_IRQ) _AHB_MONITOR_END: -#endif /* CONFIG_INIT_CRITICAL */ +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/cpu/arm1136/start.S b/cpu/arm1136/start.S index 27fcc89..c3bf6e3 100644 --- a/cpu/arm1136/start.S +++ b/cpu/arm1136/start.S @@ -129,8 +129,11 @@ next: bl cpy_clk_code /* put dpll adjust code behind vectors */ #endif /* the mask ROM code should have PLL and others stable */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit +#endif +#ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ @@ -147,6 +150,7 @@ copy_loop: stmia r1!, {r3-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end addreee [r2] */ ble copy_loop +#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ /* Set up the stack */ stack_setup: diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S index 0e15965..3695465 100644 --- a/cpu/arm720t/start.S +++ b/cpu/arm720t/start.S @@ -119,10 +119,11 @@ reset: * we do sys-critical inits only at reboot, * not when booting from ram! */ -#ifdef CONFIG_INIT_CRITICAL +#ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit #endif +#ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ @@ -150,6 +151,8 @@ copy_loop: cmp r0, r2 /* until source end addreee [r2] */ ble copy_loop +#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ + /* Set up the stack */ stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S index a7cabf8..afe654b 100644 --- a/cpu/arm920t/start.S +++ b/cpu/arm920t/start.S @@ -156,10 +156,11 @@ reset: * we do sys-critical inits only at reboot, * not when booting from ram! */ -#ifdef CONFIG_INIT_CRITICAL +#ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit #endif +#ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ @@ -176,6 +177,7 @@ copy_loop: stmia r1!, {r3-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end addreee [r2] */ ble copy_loop +#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ /* Set up the stack */ stack_setup: diff --git a/cpu/arm925t/start.S b/cpu/arm925t/start.S index f74064b..2389259 100644 --- a/cpu/arm925t/start.S +++ b/cpu/arm925t/start.S @@ -164,10 +164,11 @@ poll1: * we do sys-critical inits only at reboot, * not when booting from ram! */ -#ifdef CONFIG_INIT_CRITICAL +#ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit #endif +#ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ @@ -184,6 +185,7 @@ copy_loop: stmia r1!, {r3-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end addreee [r2] */ ble copy_loop +#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ /* Set up the stack */ stack_setup: diff --git a/cpu/arm926ejs/start.S b/cpu/arm926ejs/start.S index cd728c5..d62940b 100644 --- a/cpu/arm926ejs/start.S +++ b/cpu/arm926ejs/start.S @@ -139,10 +139,11 @@ reset: * we do sys-critical inits only at reboot, * not when booting from ram! */ -#ifdef CONFIG_INIT_CRITICAL +#ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit #endif +#ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ @@ -159,6 +160,7 @@ copy_loop: stmia r1!, {r3-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end addreee [r2] */ ble copy_loop +#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ /* Set up the stack */ stack_setup: diff --git a/cpu/at91rm9200/lowlevel.S b/cpu/at91rm9200/lowlevel.S index 5521e5d..05887ad 100644 --- a/cpu/at91rm9200/lowlevel.S +++ b/cpu/at91rm9200/lowlevel.S @@ -30,7 +30,7 @@ #include <config.h> #include <version.h> -#ifdef CONFIG_INIT_CRITICAL +#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* * some parameters for the board * @@ -197,4 +197,4 @@ SMRDATA1: .word SDRAM .word SDRAM_VAL /* SMRDATA1 is 176 bytes long */ -#endif /* CONFIG_INIT_CRITICAL */ +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/cpu/at91rm9200/start.S b/cpu/at91rm9200/start.S index 89a0aa5..62315fe 100644 --- a/cpu/at91rm9200/start.S +++ b/cpu/at91rm9200/start.S @@ -115,7 +115,7 @@ reset: orr r0,r0,#0xd3 /* was 13 */ msr cpsr,r0 -#ifdef CONFIG_INIT_CRITICAL +#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* scratch stack */ /**** ldr r1, =0x00204000 ****/ /* Insure word alignment */ @@ -141,7 +141,7 @@ reset: orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache orr r0, r0, #0xC0000000 @ set bits 31:30 (iA, nF) mcr p15, 0, r0, c1, c0, 0 @ write r0 in cp15 control register (cp15 r1) -#endif /* CONFIG_INIT_CRITICAL */ +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* * relocate exeception table */ @@ -158,9 +158,11 @@ copyex: * we do sys-critical inits only at reboot, * not when booting from ram! */ -#ifdef CONFIG_INIT_CRITICAL +#ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ +#ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ @@ -177,7 +179,7 @@ copy_loop: stmia r1!, {r3-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end addreee [r2] */ ble copy_loop -#endif /* CONFIG_INIT_CRITICAL */ +#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ /* Set up the stack */ stack_setup: diff --git a/cpu/ixp/start.S b/cpu/ixp/start.S index 3b3c868..2726f65 100644 --- a/cpu/ixp/start.S +++ b/cpu/ixp/start.S @@ -261,6 +261,7 @@ reset: orr r0,r0,#0x13 msr cpsr,r0 +#ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ @@ -277,6 +278,7 @@ copy_loop: stmia r1!, {r3-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end addreee [r2] */ ble copy_loop +#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ /* Set up the stack */ stack_setup: diff --git a/cpu/lh7a40x/start.S b/cpu/lh7a40x/start.S index 5dca773..fb748cf 100644 --- a/cpu/lh7a40x/start.S +++ b/cpu/lh7a40x/start.S @@ -145,10 +145,11 @@ reset: * we do sys-critical inits only at reboot, * not when booting from ram! */ -#ifdef CONFIG_INIT_CRITICAL +#ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit #endif +#ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ @@ -166,6 +167,7 @@ copy_loop: cmp r0, r2 /* until source end addreee [r2] */ blt copy_loop /* a 'ble' here actually copies */ /* four bytes of bss */ +#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ /* Set up the stack */ stack_setup: diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S index da753a1..a8cc080 100644 --- a/cpu/pxa/start.S +++ b/cpu/pxa/start.S @@ -108,10 +108,11 @@ reset: * we do sys-critical inits only at reboot, * not when booting from ram! */ -#ifdef CONFIG_INIT_CRITICAL +#ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit /* we do sys-critical inits */ #endif +#ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ @@ -128,6 +129,7 @@ copy_loop: stmia r1!, {r3-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end addreee [r2] */ ble copy_loop +#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ /* Set up the stack */ stack_setup: diff --git a/cpu/s3c44b0/start.S b/cpu/s3c44b0/start.S index fc7f592..7affe87 100644 --- a/cpu/s3c44b0/start.S +++ b/cpu/s3c44b0/start.S @@ -112,7 +112,7 @@ reset: * not when booting from ram! */ -#ifdef CONFIG_INIT_CRITICAL +#ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit /* * before relocating, we have to setup RAM timing @@ -122,6 +122,7 @@ reset: bl lowlevel_init #endif +#ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ @@ -151,6 +152,7 @@ vector_copy_loop: stmia r1!, {r3-r10} cmp r0, r2 ble vector_copy_loop +#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ /* Set up the stack */ stack_setup: diff --git a/cpu/sa1100/start.S b/cpu/sa1100/start.S index 08e41c7..431ee65 100644 --- a/cpu/sa1100/start.S +++ b/cpu/sa1100/start.S @@ -121,10 +121,11 @@ reset: * we do sys-critical inits only at reboot, * not when booting from ram! */ -#ifdef CONFIG_INIT_CRITICAL +#ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit #endif +#ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ @@ -141,6 +142,7 @@ copy_loop: stmia r1!, {r3-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end addreee [r2] */ ble copy_loop +#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ /* Set up the stack */ stack_setup: diff --git a/include/common.h b/include/common.h index edb704d..625c389 100644 --- a/include/common.h +++ b/include/common.h @@ -586,4 +586,9 @@ int pcmcia_init (void); void show_boot_progress (int status); #endif +#ifdef CONFIG_INIT_CRITICAL +#error CONFIG_INIT_CRITICAL is depracted! +#error Read section CONFIG_SKIP_LOWLEVEL_INIT in README. +#endif + #endif /* __COMMON_H_ */ diff --git a/include/configs/B2.h b/include/configs/B2.h index b031826..e55858d 100644 --- a/include/configs/B2.h +++ b/include/configs/B2.h @@ -31,12 +31,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/SX1.h b/include/configs/SX1.h index 7c51a1b..6ed98b8 100644 --- a/include/configs/SX1.h +++ b/include/configs/SX1.h @@ -24,12 +24,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 2c664d5..bde12e1 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -30,12 +30,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/assabet.h b/include/configs/assabet.h index a52d87d..1a69ebe 100644 --- a/include/configs/assabet.h +++ b/include/configs/assabet.h @@ -31,8 +31,6 @@ #undef DEBUG -#define CONFIG_INIT_CRITICAL - /* * High Level Configuration Options * (easy to change) diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index d32ec34..6a246b6 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -25,12 +25,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - /* ARM asynchronous clock */ #define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ #define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ @@ -44,7 +38,7 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 -#ifdef CONFIG_INIT_CRITICAL +#ifndef CONFIG_SKIP_LOWLEVEL_INIT #define CFG_USE_MAIN_OSCILLATOR 1 /* flash */ #define MC_PUIA_VAL 0x00000000 @@ -74,7 +68,7 @@ #define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif /* CONFIG_INIT_CRITICAL */ +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* * Size of malloc() pool */ @@ -177,19 +171,19 @@ #define CFG_ENV_SIZE 0x2000 /* 0x8000 */ #else #define CFG_ENV_IS_IN_FLASH 1 -#ifdef CONFIG_INIT_CRITICAL +#ifdef CONFIG_SKIP_LOWLEVEL_INIT #define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ #define CFG_ENV_SIZE 0x10000 /* sectors are 64K here */ #else #define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */ #define CFG_ENV_SIZE 0x2000 /* 0x8000 */ -#endif /* CONFIG_INIT_CRITICAL */ +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ #endif /* CFG_ENV_IS_IN_DATAFLASH */ #define CFG_LOAD_ADDR 0x21000000 /* default load address */ -#ifdef CONFIG_INIT_CRITICAL +#ifdef CONFIG_SKIP_LOWLEVEL_INIT #define CFG_BOOT_SIZE 0x00 /* 0 KBytes */ #define CFG_U_BOOT_BASE PHYS_FLASH_1 #define CFG_U_BOOT_SIZE 0x60000 /* 384 KBytes */ @@ -197,7 +191,7 @@ #define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */ #define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) #define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */ -#endif /* CONFIG_INIT_CRITICAL */ +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ #define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h index 6a136d5..6997c7a 100644 --- a/include/configs/cerf250.h +++ b/include/configs/cerf250.h @@ -31,12 +31,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index 96b7148..5e96e09 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -25,12 +25,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - /* ARM asynchronous clock */ #define AT91C_MAIN_CLOCK 207360000 /* from 18.432 MHz crystal (18432000 / 4 * 45) */ #define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */ @@ -44,7 +38,7 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 -#ifdef CONFIG_INIT_CRITICAL +#ifndef CONFIG_SKIP_LOWLEVEL_INIT #define CFG_USE_MAIN_OSCILLATOR 1 /* flash */ #define MC_PUIA_VAL 0x00000000 @@ -74,7 +68,7 @@ #define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif /* CONFIG_INIT_CRITICAL */ +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* * Size of malloc() pool diff --git a/include/configs/cradle.h b/include/configs/cradle.h index ca7a97b..776e1d2 100644 --- a/include/configs/cradle.h +++ b/include/configs/cradle.h @@ -29,12 +29,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/csb226.h b/include/configs/csb226.h index 0b2b251..f04102e 100644 --- a/include/configs/csb226.h +++ b/include/configs/csb226.h @@ -34,12 +34,6 @@ #define DEBUG 1 /* - * If we are developing, we might want to start U-Boot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h index b14e35b..9ac2856 100644 --- a/include/configs/dnp1110.h +++ b/include/configs/dnp1110.h @@ -31,7 +31,8 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#undef CONFIG_INIT_CRITICAL +#define CONFIG_SKIP_LOWLEVEL_INIT 1 +#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h index 41ad394..c6a028f 100644 --- a/include/configs/ep7312.h +++ b/include/configs/ep7312.h @@ -28,12 +28,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h index 9e0ed51..88c2c74 100644 --- a/include/configs/evb4510.h +++ b/include/configs/evb4510.h @@ -32,8 +32,8 @@ * * Also swap the flash1 and flash2 addresses during debug. * + * #define CONFIG_SKIP_LOWLEVEL_INIT */ -#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h index dbb8dec..b68a2dc 100644 --- a/include/configs/gcplus.h +++ b/include/configs/gcplus.h @@ -40,7 +40,8 @@ * boot ROM leaves the MMU enabled when it passes control to U-Boot. So * we use lowlevel_init (CONFIG_INIT_CRITICAL) to remedy that problem. */ -#define CONFIG_INIT_CRITICAL +#undef CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT 1 /* * High Level Configuration Options diff --git a/include/configs/impa7.h b/include/configs/impa7.h index dbc951d..c187c54 100644 --- a/include/configs/impa7.h +++ b/include/configs/impa7.h @@ -28,12 +28,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/innokom.h b/include/configs/innokom.h index a3d36a0..fce72e1 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -31,12 +31,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start U-Boot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h index a8067f6..b0a80a3 100644 --- a/include/configs/ixdp425.h +++ b/include/configs/ixdp425.h @@ -37,12 +37,6 @@ * U-boot generic defines start here. ***************************************************************/ -/* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* diff --git a/include/configs/lart.h b/include/configs/lart.h index 3c9895a..a00640b 100644 --- a/include/configs/lart.h +++ b/include/configs/lart.h @@ -28,12 +28,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/logodl.h b/include/configs/logodl.h index b320a40..715ed74 100644 --- a/include/configs/logodl.h +++ b/include/configs/logodl.h @@ -31,12 +31,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start U-Boot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h index 6f2c32c..d7d0460 100644 --- a/include/configs/lpd7a400.h +++ b/include/configs/lpd7a400.h @@ -23,12 +23,6 @@ #define CONFIG_LPD7A400 /* Logic LH7A400 SDK */ -/* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - #undef CONFIG_USE_IRQ /* diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h index e6855fb..4002e68 100644 --- a/include/configs/lpd7a404.h +++ b/include/configs/lpd7a404.h @@ -23,12 +23,6 @@ #define CONFIG_LPD7A404 /* Logic LH7A400 SDK */ -/* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - #undef CONFIG_USE_IRQ /* diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index 536a175..9ac62c7 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -31,12 +31,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h index 166aa11..067c846 100644 --- a/include/configs/modnet50.h +++ b/include/configs/modnet50.h @@ -28,12 +28,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start u-boot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index f7ccea3..7f3dfd5 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -29,12 +29,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h index 61a3b29..7b4dc92 100644 --- a/include/configs/mx1fs2.h +++ b/include/configs/mx1fs2.h @@ -113,8 +113,6 @@ #define PRECHARGE_CMD 0x910a8300 #define AUTOREFRESH_CMD 0xa10a8300 -#define CONFIG_INIT_CRITICAL - #define BUS32BIT_VERSION /* * SDRAM Memory Map diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h index af39e2e..0b1541d 100644 --- a/include/configs/ns9750dev.h +++ b/include/configs/ns9750dev.h @@ -28,12 +28,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index 552beed..016d3d8 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -27,12 +27,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h index 9b82215..c6ca689 100644 --- a/include/configs/omap1610h2.h +++ b/include/configs/omap1610h2.h @@ -27,12 +27,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h index c00976e..f28ede0 100644 --- a/include/configs/omap1610inn.h +++ b/include/configs/omap1610inn.h @@ -27,12 +27,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index cd2dbf1..605563a 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -27,12 +27,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h index 1bdea6c..fda55cf 100644 --- a/include/configs/omap730p2.h +++ b/include/configs/omap730p2.h @@ -27,13 +27,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ - -#define CONFIG_INIT_CRITICAL - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h index 9ba19c8..a6c2371 100644 --- a/include/configs/pleb2.h +++ b/include/configs/pleb2.h @@ -31,12 +31,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index 6cd9126..a4249c4 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -119,7 +119,6 @@ #define PRECHARGE_CMD 0x910a8200 #define AUTOREFRESH_CMD 0xa10a8200 -#define CONFIG_INIT_CRITICAL /* * SDRAM Memory Map diff --git a/include/configs/shannon.h b/include/configs/shannon.h index 8a4e370..572985b 100644 --- a/include/configs/shannon.h +++ b/include/configs/shannon.h @@ -28,16 +28,13 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ - -/* - * we just run in non-critical mode now, because we use the Inferno-Loader to - * bring us to live + * Since we use the Inferno-Loader to bring us to live, + * we skip the lowlevel init stuff. + * But U-Boot still relocates itself into RAM */ #define CONFIG_INFERNO /* we are using the inferno bootldr */ -#undef CONFIG_INIT_CRITICAL +#define CONFIG_SKIP_LOWLEVEL_INIT 1 +#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h index f477575..a137f9d 100644 --- a/include/configs/smdk2400.h +++ b/include/configs/smdk2400.h @@ -31,12 +31,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index 2a1cd77..7edec0d 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -30,12 +30,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h index 6fda7b9..1ee6be1 100644 --- a/include/configs/suzaku.h +++ b/include/configs/suzaku.h @@ -26,12 +26,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/trab.h b/include/configs/trab.h index 2f59260..3ca0049 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -37,12 +37,6 @@ #endif /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h index ca32efb..47251bb 100644 --- a/include/configs/wepep250.h +++ b/include/configs/wepep250.h @@ -23,12 +23,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - #define CONFIG_PXA250 1 /* this is an PXA250 CPU */ #define CONFIG_WEPEP250 1 /* config for wepep250 board */ #undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */ diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 1177003..386ce05 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -37,16 +37,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* -#undef CONFIG_INIT_CRITICAL -*/ - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/xm250.h b/include/configs/xm250.h index 1be7dd4..952f73b 100644 --- a/include/configs/xm250.h +++ b/include/configs/xm250.h @@ -29,12 +29,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - -/* * High Level Configuration Options * (easy to change) */ diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index 6b15766..847e91a 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -28,12 +28,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL - /* High Level Configuration Options */ #define CONFIG_PXA250 1 /* This is an PXA250 CPU */ #define CONFIG_XSENGINE 1 |