diff options
| -rw-r--r-- | cpu/arm1136/cpu.c | 50 | ||||
| -rw-r--r-- | cpu/arm1176/cpu.c | 58 | ||||
| -rw-r--r-- | cpu/arm720t/cpu.c | 58 | ||||
| -rw-r--r-- | cpu/arm920t/cpu.c | 69 | ||||
| -rw-r--r-- | cpu/arm925t/cpu.c | 57 | ||||
| -rw-r--r-- | cpu/arm926ejs/cpu.c | 71 | ||||
| -rw-r--r-- | cpu/arm946es/cpu.c | 57 | ||||
| -rw-r--r-- | cpu/arm_cortexa8/cpu.c | 48 | ||||
| -rw-r--r-- | cpu/ixp/cpu.c | 53 | ||||
| -rw-r--r-- | cpu/lh7a40x/cpu.c | 68 | ||||
| -rw-r--r-- | cpu/pxa/cpu.c | 53 | ||||
| -rw-r--r-- | cpu/sa1100/cpu.c | 45 | ||||
| -rw-r--r-- | include/asm-arm/system.h | 84 |
13 files changed, 238 insertions, 533 deletions
diff --git a/cpu/arm1136/cpu.c b/cpu/arm1136/cpu.c index 0486163..0abe307 100644 --- a/cpu/arm1136/cpu.c +++ b/cpu/arm1136/cpu.c @@ -33,36 +33,12 @@ #include <common.h> #include <command.h> +#include <asm/system.h> #ifdef CONFIG_USE_IRQ DECLARE_GLOBAL_DATA_PTR; #endif -/* read co-processor 15, register #1 (control register) */ -static unsigned long read_p15_c1 (void) -{ - unsigned long value; - - __asm__ __volatile__( - "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" - : "=r" (value) - : - : "memory"); - return value; -} - -/* write to co-processor 15, register #1 (control register) */ -static void write_p15_c1 (unsigned long value) -{ - __asm__ __volatile__( - "mcr p15, 0, %0, c1, c0, 0 @ write it back\n" - : - : "r" (value) - : "memory"); - - read_p15_c1 (); -} - static void cp_delay (void) { volatile int i; @@ -71,18 +47,6 @@ static void cp_delay (void) for (i = 0; i < 100; i++); } -/* See also ARM Ref. Man. */ -#define C1_MMU (1<<0) /* mmu off/on */ -#define C1_ALIGN (1<<1) /* alignment faults off/on */ -#define C1_DC (1<<2) /* dcache off/on */ -#define C1_WB (1<<3) /* merging write buffer on/off */ -#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ -#define C1_SYS_PROT (1<<8) /* system protection */ -#define C1_ROM_PROT (1<<9) /* ROM protection */ -#define C1_IC (1<<12) /* icache off/on */ -#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ -#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */ - int cpu_init (void) { /* @@ -120,7 +84,7 @@ int cleanup_before_linux (void) /* turn off I/D-cache */ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); - i &= ~(C1_DC | C1_IC); + i &= ~(CR_C | CR_I); asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i)); /* flush I/D-cache */ @@ -142,21 +106,21 @@ void icache_enable (void) { ulong reg; - reg = read_p15_c1 (); /* get control reg. */ + reg = get_cr (); /* get control reg. */ cp_delay (); - write_p15_c1 (reg | C1_IC); + set_cr (reg | CR_I); } void icache_disable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg & ~C1_IC); + set_cr (reg & ~CR_I); } int icache_status (void) { - return(read_p15_c1 () & C1_IC) != 0; + return(get_cr () & CR_I) != 0; } diff --git a/cpu/arm1176/cpu.c b/cpu/arm1176/cpu.c index 1e94f7d..ef78bd9 100644 --- a/cpu/arm1176/cpu.c +++ b/cpu/arm1176/cpu.c @@ -34,34 +34,10 @@ #include <common.h> #include <command.h> #include <s3c6400.h> +#include <asm/system.h> static void cache_flush (void); -/* read co-processor 15, register #1 (control register) */ -static unsigned long read_p15_c1 (void) -{ - unsigned long value; - - __asm__ __volatile__( - "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" - : "=r" (value) - : - : "memory"); - return value; -} - -/* write to co-processor 15, register #1 (control register) */ -static void write_p15_c1 (unsigned long value) -{ - __asm__ __volatile__( - "mcr p15, 0, %0, c1, c0, 0 @ write it back\n" - : - : "r" (value) - : "memory"); - - read_p15_c1(); -} - static void cp_delay (void) { volatile int i; @@ -71,18 +47,6 @@ static void cp_delay (void) __asm__ __volatile__("nop\n"); } -/* See also ARM Ref. Man. */ -#define C1_MMU (1 << 0) /* mmu off/on */ -#define C1_ALIGN (1 << 1) /* alignment faults off/on */ -#define C1_DC (1 << 2) /* dcache off/on */ -#define C1_WB (1 << 3) /* merging write buffer on/off */ -#define C1_BIG_ENDIAN (1 << 7) /* big endian off/on */ -#define C1_SYS_PROT (1 << 8) /* system protection */ -#define C1_ROM_PROT (1 << 9) /* ROM protection */ -#define C1_IC (1 << 12) /* icache off/on */ -#define C1_HIGH_VECTORS (1 << 13) /* location of vectors: low/high */ -#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */ - int cpu_init (void) { return 0; @@ -135,23 +99,23 @@ void icache_enable (void) { ulong reg; - reg = read_p15_c1 (); /* get control reg. */ + reg = get_cr (); /* get control reg. */ cp_delay (); - write_p15_c1 (reg | C1_IC); + set_cr (reg | CR_I); } void icache_disable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg & ~C1_IC); + set_cr (reg & ~CR_I); } int icache_status (void) { - return (read_p15_c1 () & C1_IC) != 0; + return (get_cr () & CR_I) != 0; } /* It makes no sense to use the dcache if the MMU is not enabled */ @@ -159,23 +123,23 @@ void dcache_enable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg | C1_DC); + set_cr (reg | CR_C); } void dcache_disable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg & ~C1_DC); + set_cr (reg & ~CR_C); } int dcache_status (void) { - return (read_p15_c1 () & C1_DC) != 0; + return (get_cr () & CR_C) != 0; } /* flush I/D-cache */ diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c index 8166982..d178e41 100644 --- a/cpu/arm720t/cpu.c +++ b/cpu/arm720t/cpu.c @@ -34,6 +34,7 @@ #include <command.h> #include <clps7111.h> #include <asm/hardware.h> +#include <asm/system.h> int cpu_init (void) { @@ -98,33 +99,6 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) */ #if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO) -/* read co-processor 15, register #1 (control register) */ -static unsigned long read_p15_c1(void) -{ - unsigned long value; - - __asm__ __volatile__( - "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" - : "=r" (value) - : - : "memory"); - /* printf("p15/c1 is = %08lx\n", value); */ - return value; -} - -/* write to co-processor 15, register #1 (control register) */ -static void write_p15_c1(unsigned long value) -{ - /* printf("write %08lx to p15/c1\n", value); */ - __asm__ __volatile__( - "mcr p15, 0, %0, c1, c0, 0 @ write it back\n" - : - : "r" (value) - : "memory"); - - read_p15_c1(); -} - static void cp_delay (void) { volatile int i; @@ -133,60 +107,50 @@ static void cp_delay (void) for (i = 0; i < 100; i++); } -/* See also ARM Ref. Man. */ -#define C1_MMU (1<<0) /* mmu off/on */ -#define C1_ALIGN (1<<1) /* alignment faults off/on */ -#define C1_IDC (1<<2) /* icache and/or dcache off/on */ -#define C1_WRITE_BUFFER (1<<3) /* write buffer off/on */ -#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ -#define C1_SYS_PROT (1<<8) /* system protection */ -#define C1_ROM_PROT (1<<9) /* ROM protection */ -#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ - void icache_enable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg | C1_IDC); + set_cr (reg | CR_C); } void icache_disable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg & ~C1_IDC); + set_cr (reg & ~CR_C); } int icache_status (void) { - return (read_p15_c1 () & C1_IDC) != 0; + return (get_cr () & CR_C) != 0; } void dcache_enable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg | C1_IDC); + set_cr (reg | CR_C); } void dcache_disable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg & ~C1_IDC); + set_cr (reg & ~CR_C); } int dcache_status (void) { - return (read_p15_c1 () & C1_IDC) != 0; + return (get_cr () & CR_C) != 0; } #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* No specific cache setup for IntegratorAP/CM720T as yet */ diff --git a/cpu/arm920t/cpu.c b/cpu/arm920t/cpu.c index 1b9cde6..83ee3f3 100644 --- a/cpu/arm920t/cpu.c +++ b/cpu/arm920t/cpu.c @@ -32,43 +32,12 @@ #include <common.h> #include <command.h> #include <arm920t.h> +#include <asm/system.h> #ifdef CONFIG_USE_IRQ DECLARE_GLOBAL_DATA_PTR; #endif -/* read co-processor 15, register #1 (control register) */ -static unsigned long read_p15_c1 (void) -{ - unsigned long value; - - __asm__ __volatile__( - "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" - : "=r" (value) - : - : "memory"); - -#ifdef MMU_DEBUG - printf ("p15/c1 is = %08lx\n", value); -#endif - return value; -} - -/* write to co-processor 15, register #1 (control register) */ -static void write_p15_c1 (unsigned long value) -{ -#ifdef MMU_DEBUG - printf ("write %08lx to p15/c1\n", value); -#endif - __asm__ __volatile__( - "mcr p15, 0, %0, c1, c0, 0 @ write it back\n" - : - : "r" (value) - : "memory"); - - read_p15_c1 (); -} - static void cp_delay (void) { volatile int i; @@ -77,18 +46,6 @@ static void cp_delay (void) for (i = 0; i < 100; i++); } -/* See also ARM920T Technical reference Manual */ -#define C1_MMU (1<<0) /* mmu off/on */ -#define C1_ALIGN (1<<1) /* alignment faults off/on */ -#define C1_DC (1<<2) /* dcache off/on */ - -#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ -#define C1_SYS_PROT (1<<8) /* system protection */ -#define C1_ROM_PROT (1<<9) /* ROM protection */ -#define C1_IC (1<<12) /* icache off/on */ -#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ - - int cpu_init (void) { /* @@ -116,7 +73,7 @@ int cleanup_before_linux (void) /* turn off I/D-cache */ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); - i &= ~(C1_DC | C1_IC); + i &= ~(CR_C | CR_I); asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i)); /* flush I/D-cache */ @@ -138,23 +95,23 @@ void icache_enable (void) { ulong reg; - reg = read_p15_c1 (); /* get control reg. */ + reg = get_cr (); /* get control reg. */ cp_delay (); - write_p15_c1 (reg | C1_IC); + set_cr (reg | CR_I); } void icache_disable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg & ~C1_IC); + set_cr (reg & ~CR_I); } int icache_status (void) { - return (read_p15_c1 () & C1_IC) != 0; + return (get_cr () & CR_I) != 0; } #ifdef USE_920T_MMU @@ -163,23 +120,23 @@ void dcache_enable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg | C1_DC); + set_cr (reg | CR_C); } void dcache_disable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - reg &= ~C1_DC; - write_p15_c1 (reg); + reg &= ~CR_C; + set_cr (reg); } int dcache_status (void) { - return (read_p15_c1 () & C1_DC) != 0; + return (get_cr () & CR_C) != 0; } #endif diff --git a/cpu/arm925t/cpu.c b/cpu/arm925t/cpu.c index b9f0931..8d1b562 100644 --- a/cpu/arm925t/cpu.c +++ b/cpu/arm925t/cpu.c @@ -32,43 +32,12 @@ #include <common.h> #include <command.h> #include <arm925t.h> +#include <asm/system.h> #ifdef CONFIG_USE_IRQ DECLARE_GLOBAL_DATA_PTR; #endif -/* read co-processor 15, register #1 (control register) */ -static unsigned long read_p15_c1 (void) -{ - unsigned long value; - - __asm__ __volatile__( - "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" - : "=r" (value) - : - : "memory"); - -#ifdef MMU_DEBUG - printf ("p15/c1 is = %08lx\n", value); -#endif - return value; -} - -/* write to co-processor 15, register #1 (control register) */ -static void write_p15_c1 (unsigned long value) -{ -#ifdef MMU_DEBUG - printf ("write %08lx to p15/c1\n", value); -#endif - __asm__ __volatile__( - "mcr p15, 0, %0, c1, c0, 0 @ write it back\n" - : - : "r" (value) - : "memory"); - - read_p15_c1 (); -} - static void cp_delay (void) { volatile int i; @@ -77,18 +46,6 @@ static void cp_delay (void) for (i = 0; i < 100; i++); } -/* See also ARM Ref. Man. */ -#define C1_MMU (1<<0) /* mmu off/on */ -#define C1_ALIGN (1<<1) /* alignment faults off/on */ -#define C1_DC (1<<2) /* dcache off/on */ -#define C1_WB (1<<3) /* merging write buffer on/off */ -#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ -#define C1_SYS_PROT (1<<8) /* system protection */ -#define C1_ROM_PROT (1<<9) /* ROM protection */ -#define C1_IC (1<<12) /* icache off/on */ -#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ -#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */ - int cpu_init (void) { /* @@ -116,7 +73,7 @@ int cleanup_before_linux (void) /* turn off I/D-cache */ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); - i &= ~(C1_DC | C1_IC); + i &= ~(CR_C | CR_I); asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i)); /* flush I/D-cache */ @@ -137,21 +94,21 @@ void icache_enable (void) { ulong reg; - reg = read_p15_c1 (); /* get control reg. */ + reg = get_cr (); /* get control reg. */ cp_delay (); - write_p15_c1 (reg | C1_IC); + set_cr (reg | CR_I); } void icache_disable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg & ~C1_IC); + set_cr (reg & ~CR_I); } int icache_status (void) { - return (read_p15_c1 () & C1_IC) != 0; + return (get_cr () & CR_I) != 0; } diff --git a/cpu/arm926ejs/cpu.c b/cpu/arm926ejs/cpu.c index 48a2c0b..d1748c9 100644 --- a/cpu/arm926ejs/cpu.c +++ b/cpu/arm926ejs/cpu.c @@ -32,43 +32,12 @@ #include <common.h> #include <command.h> #include <arm926ejs.h> +#include <asm/system.h> #ifdef CONFIG_USE_IRQ DECLARE_GLOBAL_DATA_PTR; #endif -/* read co-processor 15, register #1 (control register) */ -static unsigned long read_p15_c1 (void) -{ - unsigned long value; - - __asm__ __volatile__( - "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" - : "=r" (value) - : - : "memory"); - -#ifdef MMU_DEBUG - printf ("p15/c1 is = %08lx\n", value); -#endif - return value; -} - -/* write to co-processor 15, register #1 (control register) */ -static void write_p15_c1 (unsigned long value) -{ -#ifdef MMU_DEBUG - printf ("write %08lx to p15/c1\n", value); -#endif - __asm__ __volatile__( - "mcr p15, 0, %0, c1, c0, 0 @ write it back\n" - : - : "r" (value) - : "memory"); - - read_p15_c1 (); -} - static void cp_delay (void) { volatile int i; @@ -77,18 +46,6 @@ static void cp_delay (void) for (i = 0; i < 100; i++); } -/* See also ARM926EJ-S Technical Reference Manual */ -#define C1_MMU (1<<0) /* mmu off/on */ -#define C1_ALIGN (1<<1) /* alignment faults off/on */ -#define C1_DC (1<<2) /* dcache off/on */ - -#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ -#define C1_SYS_PROT (1<<8) /* system protection */ -#define C1_ROM_PROT (1<<9) /* ROM protection */ -#define C1_IC (1<<12) /* icache off/on */ -#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ - - int cpu_init (void) { /* @@ -116,7 +73,7 @@ int cleanup_before_linux (void) /* turn off I/D-cache */ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); - i &= ~(C1_DC | C1_IC); + i &= ~(CR_C | CR_I); asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i)); /* flush I/D-cache */ @@ -134,52 +91,52 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return (0); } -/* cache_bit must be either C1_IC or C1_DC */ +/* cache_bit must be either CR_I or CR_C */ static void cache_enable(uint32_t cache_bit) { uint32_t reg; - reg = read_p15_c1(); /* get control reg. */ + reg = get_cr(); /* get control reg. */ cp_delay(); - write_p15_c1(reg | cache_bit); + set_cr(reg | cache_bit); } -/* cache_bit must be either C1_IC or C1_DC */ +/* cache_bit must be either CR_I or CR_C */ static void cache_disable(uint32_t cache_bit) { uint32_t reg; - reg = read_p15_c1(); + reg = get_cr(); cp_delay(); - write_p15_c1(reg & ~cache_bit); + set_cr(reg & ~cache_bit); } void icache_enable(void) { - cache_enable(C1_IC); + cache_enable(CR_I); } void icache_disable(void) { - cache_disable(C1_IC); + cache_disable(CR_I); } int icache_status(void) { - return (read_p15_c1() & C1_IC) != 0; + return (get_cr() & CR_I) != 0; } void dcache_enable(void) { - cache_enable(C1_DC); + cache_enable(CR_C); } void dcache_disable(void) { - cache_disable(C1_DC); + cache_disable(CR_C); } int dcache_status(void) { - return (read_p15_c1() & C1_DC) != 0; + return (get_cr() & CR_C) != 0; } diff --git a/cpu/arm946es/cpu.c b/cpu/arm946es/cpu.c index 44c589a..25684f2 100644 --- a/cpu/arm946es/cpu.c +++ b/cpu/arm946es/cpu.c @@ -32,43 +32,12 @@ #include <common.h> #include <command.h> #include <arm946es.h> +#include <asm/system.h> #ifdef CONFIG_USE_IRQ DECLARE_GLOBAL_DATA_PTR; #endif -/* read co-processor 15, register #1 (control register) */ -static unsigned long read_p15_c1 (void) -{ - unsigned long value; - - __asm__ __volatile__( - "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" - : "=r" (value) - : - : "memory"); - -#ifdef MMU_DEBUG - printf ("p15/c1 is = %08lx\n", value); -#endif - return value; -} - -/* write to co-processor 15, register #1 (control register) */ -static void write_p15_c1 (unsigned long value) -{ -#ifdef MMU_DEBUG - printf ("write %08lx to p15/c1\n", value); -#endif - __asm__ __volatile__( - "mcr p15, 0, %0, c1, c0, 0 @ write it back\n" - : - : "r" (value) - : "memory"); - - read_p15_c1 (); -} - static void cp_delay (void) { volatile int i; @@ -77,18 +46,6 @@ static void cp_delay (void) for (i = 0; i < 100; i++); } -/* See also ARM946E-S Technical Reference Manual */ -#define C1_MMU (1<<0) /* mmu off/on */ -#define C1_ALIGN (1<<1) /* alignment faults off/on */ -#define C1_DC (1<<2) /* dcache off/on */ - -#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ -#define C1_SYS_PROT (1<<8) /* system protection */ -#define C1_ROM_PROT (1<<9) /* ROM protection */ -#define C1_IC (1<<12) /* icache off/on */ -#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ - - int cpu_init (void) { /* @@ -120,7 +77,7 @@ int cleanup_before_linux (void) */ /* turn off I/D-cache */ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); - i &= ~(C1_DC | C1_IC); + i &= ~(CR_C | CR_I); asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i)); /* flush I/D-cache */ @@ -145,21 +102,21 @@ void icache_enable (void) { ulong reg; - reg = read_p15_c1 (); /* get control reg. */ + reg = get_cr (); /* get control reg. */ cp_delay (); - write_p15_c1 (reg | C1_IC); + set_cr (reg | CR_I); } void icache_disable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg & ~C1_IC); + set_cr (reg & ~CR_I); } int icache_status (void) { - return (read_p15_c1 () & C1_IC) != 0; + return (get_cr () & CR_I) != 0; } diff --git a/cpu/arm_cortexa8/cpu.c b/cpu/arm_cortexa8/cpu.c index ad2085b..506dbec 100644 --- a/cpu/arm_cortexa8/cpu.c +++ b/cpu/arm_cortexa8/cpu.c @@ -34,6 +34,7 @@ #include <common.h> #include <command.h> #include <asm/arch/sys_proto.h> +#include <asm/system.h> #ifdef CONFIG_USE_IRQ DECLARE_GLOBAL_DATA_PTR; @@ -45,27 +46,6 @@ void l2cache_disable(void); static void cache_flush(void); -/* read co-processor 15, register #1 (control register) */ -static unsigned long read_p15_c1(void) -{ - unsigned long value; - - __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 0\ - @ read control reg\n":"=r"(value) - ::"memory"); - return value; -} - -/* write to co-processor 15, register #1 (control register) */ -static void write_p15_c1(unsigned long value) -{ - __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 0\ - @ write it back\n"::"r"(value) - : "memory"); - - read_p15_c1(); -} - static void cp_delay(void) { /* Many OMAP regs need at least 2 nops */ @@ -73,18 +53,6 @@ static void cp_delay(void) asm("nop"); } -/* See also ARM Ref. Man. */ -#define C1_MMU (1<<0) /* mmu off/on */ -#define C1_ALIGN (1<<1) /* alignment faults off/on */ -#define C1_DC (1<<2) /* dcache off/on */ -#define C1_WB (1<<3) /* merging write buffer on/off */ -#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ -#define C1_SYS_PROT (1<<8) /* system protection */ -#define C1_ROM_PROT (1<<9) /* ROM protection */ -#define C1_IC (1<<12) /* icache off/on */ -#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ -#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */ - int cpu_init(void) { /* @@ -147,27 +115,27 @@ void icache_enable(void) { ulong reg; - reg = read_p15_c1(); /* get control reg. */ + reg = get_cr(); /* get control reg. */ cp_delay(); - write_p15_c1(reg | C1_IC); + set_cr(reg | CR_I); } void icache_disable(void) { ulong reg; - reg = read_p15_c1(); + reg = get_cr(); cp_delay(); - write_p15_c1(reg & ~C1_IC); + set_cr(reg & ~CR_I); } void dcache_disable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg & ~C1_DC); + set_cr (reg & ~CR_C); } void l2cache_enable() @@ -231,7 +199,7 @@ void l2cache_disable() int icache_status(void) { - return (read_p15_c1() & C1_IC) != 0; + return (get_cr() & CR_I) != 0; } static void cache_flush(void) diff --git a/cpu/ixp/cpu.c b/cpu/ixp/cpu.c index fd545b5..265c820 100644 --- a/cpu/ixp/cpu.c +++ b/cpu/ixp/cpu.c @@ -34,6 +34,7 @@ #include <command.h> #include <netdev.h> #include <asm/arch/ixp425.h> +#include <asm/system.h> ulong loops_per_jiffy; @@ -125,47 +126,39 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return (0); } -/* taken from blob */ -void icache_enable (void) +/* cache_bit must be either CR_I or CR_C */ +static void cache_enable(uint32_t cache_bit) { - register u32 i; + uint32_t reg; - /* read control register */ - asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); - - /* set i-cache */ - i |= 0x1000; - - /* write back to control register */ - asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i)); + reg = get_cr(); /* get control reg. */ + cp_delay(); + set_cr(reg | cache_bit); } -void icache_disable (void) +/* cache_bit must be either CR_I or CR_C */ +static void cache_disable(uint32_t cache_bit) { - register u32 i; - - /* read control register */ - asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); - - /* clear i-cache */ - i &= ~0x1000; + uint32_t reg; - /* write back to control register */ - asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i)); - - /* flush i-cache */ - asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i)); + reg = get_cr(); + cp_delay(); + set_cr(reg & ~cache_bit); } -int icache_status (void) +void icache_enable(void) { - register u32 i; + cache_enable(CR_I); +} - /* read control register */ - asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); +void icache_disable(void) +{ + cache_disable(CR_I); +} - /* return bit */ - return (i & 0x1000); +int icache_status(void) +{ + return (get_cr() & CR_I) != 0; } /* we will never enable dcache, because we have to setup MMU first */ diff --git a/cpu/lh7a40x/cpu.c b/cpu/lh7a40x/cpu.c index 8ff3a36..2c6799f 100644 --- a/cpu/lh7a40x/cpu.c +++ b/cpu/lh7a40x/cpu.c @@ -32,43 +32,12 @@ #include <common.h> #include <command.h> #include <arm920t.h> +#include <asm/system.h> #ifdef CONFIG_USE_IRQ DECLARE_GLOBAL_DATA_PTR; #endif -/* read co-processor 15, register #1 (control register) */ -static unsigned long read_p15_c1 (void) -{ - unsigned long value; - - __asm__ __volatile__( - "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" - : "=r" (value) - : - : "memory"); - -#ifdef MMU_DEBUG - printf ("p15/c1 is = %08lx\n", value); -#endif - return value; -} - -/* write to co-processor 15, register #1 (control register) */ -static void write_p15_c1 (unsigned long value) -{ -#ifdef MMU_DEBUG - printf ("write %08lx to p15/c1\n", value); -#endif - __asm__ __volatile__( - "mcr p15, 0, %0, c1, c0, 0 @ write it back\n" - : - : "r" (value) - : "memory"); - - read_p15_c1 (); -} - static void cp_delay (void) { volatile int i; @@ -77,17 +46,6 @@ static void cp_delay (void) for (i = 0; i < 100; i++); } -/* See also ARM Ref. Man. */ -#define C1_MMU (1<<0) /* mmu off/on */ -#define C1_ALIGN (1<<1) /* alignment faults off/on */ -#define C1_DC (1<<2) /* dcache off/on */ -#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ -#define C1_SYS_PROT (1<<8) /* system protection */ -#define C1_ROM_PROT (1<<9) /* ROM protection */ -#define C1_IC (1<<12) /* icache off/on */ -#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ -#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */ - int cpu_init (void) { /* @@ -115,7 +73,7 @@ int cleanup_before_linux (void) /* turn off I/D-cache */ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); - i &= ~(C1_DC | C1_IC); + i &= ~(CR_C | CR_I); asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i)); /* flush I/D-cache */ @@ -136,23 +94,23 @@ void icache_enable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg | C1_IC); + set_cr (reg | CR_I); } void icache_disable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg & ~C1_IC); + set_cr (reg & ~CR_I); } int icache_status (void) { - return (read_p15_c1 () & C1_IC) != 0; + return (get_cr () & CR_I) != 0; } #ifdef USE_920T_MMU @@ -161,23 +119,23 @@ void dcache_enable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - write_p15_c1 (reg | C1_DC); + set_cr (reg | CR_C); } void dcache_disable (void) { ulong reg; - reg = read_p15_c1 (); + reg = get_cr (); cp_delay (); - reg &= ~C1_DC; - write_p15_c1 (reg); + reg &= ~CR_C; + set_cr (reg); } int dcache_status (void) { - return (read_p15_c1 () & C1_DC) != 0; + return (get_cr () & CR_C) != 0; } #endif diff --git a/cpu/pxa/cpu.c b/cpu/pxa/cpu.c index e84cb5b..e27b6b9 100644 --- a/cpu/pxa/cpu.c +++ b/cpu/pxa/cpu.c @@ -33,6 +33,7 @@ #include <common.h> #include <command.h> #include <asm/arch/pxa-regs.h> +#include <asm/system.h> #ifdef CONFIG_USE_IRQ DECLARE_GLOBAL_DATA_PTR; @@ -86,47 +87,39 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return (0); } -/* taken from blob */ -void icache_enable (void) +/* cache_bit must be either CR_I or CR_C */ +static void cache_enable(uint32_t cache_bit) { - register u32 i; + uint32_t reg; - /* read control register */ - asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); - - /* set i-cache */ - i |= 0x1000; - - /* write back to control register */ - asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i)); + reg = get_cr(); /* get control reg. */ + cp_delay(); + set_cr(reg | cache_bit); } -void icache_disable (void) +/* cache_bit must be either CR_I or CR_C */ +static void cache_disable(uint32_t cache_bit) { - register u32 i; - - /* read control register */ - asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); - - /* clear i-cache */ - i &= ~0x1000; + uint32_t reg; - /* write back to control register */ - asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i)); - - /* flush i-cache */ - asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i)); + reg = get_cr(); + cp_delay(); + set_cr(reg & ~cache_bit); } -int icache_status (void) +void icache_enable(void) { - register u32 i; + cache_enable(CR_I); +} - /* read control register */ - asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); +void icache_disable(void) +{ + cache_disable(CR_I); +} - /* return bit */ - return (i & 0x1000); +int icache_status(void) +{ + return (get_cr() & CR_I) != 0; } /* we will never enable dcache, because we have to setup MMU first */ diff --git a/cpu/sa1100/cpu.c b/cpu/sa1100/cpu.c index bb4e5a1..d0dfa3d 100644 --- a/cpu/sa1100/cpu.c +++ b/cpu/sa1100/cpu.c @@ -32,6 +32,7 @@ #include <common.h> #include <command.h> +#include <asm/system.h> #ifdef CONFIG_USE_IRQ DECLARE_GLOBAL_DATA_PTR; @@ -85,47 +86,35 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return (0); } -/* taken from blob */ -void icache_enable (void) +static void cp_delay (void) { - register u32 i; + volatile int i; - /* read control register */ - asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); + /* copro seems to need some delay between reading and writing */ + for (i = 0; i < 100; i++); +} - /* set i-cache */ - i |= 0x1000; +void icache_enable (void) +{ + ulong reg; - /* write back to control register */ - asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i)); + reg = get_cr (); + cp_delay (); + set_cr (reg | CR_C); } void icache_disable (void) { - register u32 i; - - /* read control register */ - asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); + ulong reg; - /* clear i-cache */ - i &= ~0x1000; - - /* write back to control register */ - asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i)); - - /* flush i-cache */ - asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i)); + reg = get_cr (); + cp_delay (); + set_cr (reg & ~CR_C); } int icache_status (void) { - register u32 i; - - /* read control register */ - asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); - - /* return bit */ - return (i & 0x1000); + return (get_cr () & CR_C) != 0; } /* we will never enable dcache, because we have to setup MMU first */ diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h new file mode 100644 index 0000000..2b28a26 --- /dev/null +++ b/include/asm-arm/system.h @@ -0,0 +1,84 @@ +#ifndef __ASM_ARM_SYSTEM_H +#define __ASM_ARM_SYSTEM_H + +#ifdef __KERNEL__ + +#define CPU_ARCH_UNKNOWN 0 +#define CPU_ARCH_ARMv3 1 +#define CPU_ARCH_ARMv4 2 +#define CPU_ARCH_ARMv4T 3 +#define CPU_ARCH_ARMv5 4 +#define CPU_ARCH_ARMv5T 5 +#define CPU_ARCH_ARMv5TE 6 +#define CPU_ARCH_ARMv5TEJ 7 +#define CPU_ARCH_ARMv6 8 +#define CPU_ARCH_ARMv7 9 + +/* + * CR1 bits (CP#15 CR1) + */ +#define CR_M (1 << 0) /* MMU enable */ +#define CR_A (1 << 1) /* Alignment abort enable */ +#define CR_C (1 << 2) /* Dcache enable */ +#define CR_W (1 << 3) /* Write buffer enable */ +#define CR_P (1 << 4) /* 32-bit exception handler */ +#define CR_D (1 << 5) /* 32-bit data address range */ +#define CR_L (1 << 6) /* Implementation defined */ +#define CR_B (1 << 7) /* Big endian */ +#define CR_S (1 << 8) /* System MMU protection */ +#define CR_R (1 << 9) /* ROM MMU protection */ +#define CR_F (1 << 10) /* Implementation defined */ +#define CR_Z (1 << 11) /* Implementation defined */ +#define CR_I (1 << 12) /* Icache enable */ +#define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */ +#define CR_RR (1 << 14) /* Round Robin cache replacement */ +#define CR_L4 (1 << 15) /* LDR pc can set T bit */ +#define CR_DT (1 << 16) +#define CR_IT (1 << 18) +#define CR_ST (1 << 19) +#define CR_FI (1 << 21) /* Fast interrupt (lower latency mode) */ +#define CR_U (1 << 22) /* Unaligned access operation */ +#define CR_XP (1 << 23) /* Extended page tables */ +#define CR_VE (1 << 24) /* Vectored interrupts */ +#define CR_EE (1 << 25) /* Exception (Big) Endian */ +#define CR_TRE (1 << 28) /* TEX remap enable */ +#define CR_AFE (1 << 29) /* Access flag enable */ +#define CR_TE (1 << 30) /* Thumb exception enable */ + +/* + * This is used to ensure the compiler did actually allocate the register we + * asked it for some inline assembly sequences. Apparently we can't trust + * the compiler from one version to another so a bit of paranoia won't hurt. + * This string is meant to be concatenated with the inline asm string and + * will cause compilation to stop on mismatch. + * (for details, see gcc PR 15089) + */ +#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t" + +#ifndef __ASSEMBLY__ + +#define isb() __asm__ __volatile__ ("" : : : "memory") + +#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); + +static inline unsigned int get_cr(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc"); + return val; +} + +static inline void set_cr(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" + : : "r" (val) : "cc"); + isb(); +} + +#endif /* __ASSEMBLY__ */ + +#define arch_align_stack(x) (x) + +#endif /* __KERNEL__ */ + +#endif |