diff options
28 files changed, 1285 insertions, 667 deletions
@@ -76,21 +76,21 @@ LIST_8xx=" \ LIST_4xx=" \ acadia ADCIOP alpr AP1000 \ - AR405 ASH405 bamboo bubinga \ - CANBT CMS700 CPCI2DP CPCI405 \ - CPCI4052 CPCI405AB CPCI405DT CPCI440 \ - CPCIISER4 CRAYL1 csb272 csb472 \ - DASA_SIM DP405 DU405 ebony \ - ERIC EXBITGEN G2000 HH405 \ - HUB405 JSE KAREF katmai \ - luan METROBOX MIP405 MIP405T \ - ML2 ml300 ocotea OCRTC \ - ORSG p3p440 PCI405 pcs440ep \ - PIP405 PLU405 PMC405 PPChameleonEVB \ - sbc405 sc3 sequoia sequoia_nand \ - taishan VOH405 VOM405 W7OLMC \ - W7OLMG walnut WUH405 XPEDITE1K \ - yellowstone yosemite yucca \ + AR405 ASH405 bamboo bamboo_nand \ + bubinga CANBT CMS700 CPCI2DP \ + CPCI405 CPCI4052 CPCI405AB CPCI405DT \ + CPCI440 CPCIISER4 CRAYL1 csb272 \ + csb472 DASA_SIM DP405 DU405 \ + ebony ERIC EXBITGEN G2000 \ + HH405 HUB405 JSE KAREF \ + katmai luan METROBOX MIP405 \ + MIP405T ML2 ml300 ocotea \ + OCRTC ORSG p3p440 PCI405 \ + pcs440ep PIP405 PLU405 PMC405 \ + PPChameleonEVB sbc405 sc3 sequoia \ + sequoia_nand taishan VOH405 VOM405 \ + W7OLMC W7OLMG walnut WUH405 \ + XPEDITE1K yellowstone yosemite yucca \ " ######################################################################### @@ -1041,6 +1041,15 @@ ASH405_config: unconfig bamboo_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc +bamboo_nand_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)nand_spl + @mkdir -p $(obj)board/amcc/bamboo + @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h + @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc + @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + bubinga_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc @@ -1795,8 +1804,16 @@ sbc8560_66_config: unconfig stxgp3_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 -stxssa_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxssa +stxssa_config \ +stxssa_4M_config: unconfig + @mkdir -p $(obj)include + @if [ "$(findstring _4M_,$@)" ] ; then \ + echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ + echo "... with 4 MiB flash memory" ; \ + else \ + >$(obj)include/config.h ; \ + fi + @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa TQM8540_config \ TQM8541_config \ diff --git a/board/amcc/bamboo/Makefile b/board/amcc/bamboo/Makefile index 5da96e9..d01cc49 100644 --- a/board/amcc/bamboo/Makefile +++ b/board/amcc/bamboo/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002-2006 +# (C) Copyright 2002-2007 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -33,7 +33,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index 6260b01..2e651df 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -291,6 +291,7 @@ int checkboard(void) return (0); } +#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)) /************************************************************************* * * init_spd_array -- Bamboo has one bank onboard sdram (plus DIMM) @@ -345,10 +346,12 @@ static void init_spd_array(void) cfg_simulate_spd_eeprom[25] = 0x00; /* SDRAM Cycle Time (cas latency 1.5) = N.A */ cfg_simulate_spd_eeprom[12] = 0x82; /* refresh Rate Type: Normal (15.625us) + Self refresh */ } +#endif long int initdram (int board_type) { - long dram_size = 0; +#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)) + long dram_size; /* * First write simulated values in eeprom array for onboard bank 0 @@ -358,6 +361,9 @@ long int initdram (int board_type) dram_size = spd_sdram(); return dram_size; +#else + return CFG_MBYTES_SDRAM << 20; +#endif } #if defined(CFG_DRAM_TEST) @@ -881,11 +887,11 @@ void ext_bus_cntlr_init(void) /*------------------------------------------------------------------------- */ case BOOT_FROM_NAND_FLASH0: /*------------------------------------------------------------------------- */ - ebc0_cs0_bnap_value = 0; - ebc0_cs0_bncr_value = 0; + ebc0_cs0_bnap_value = EBC0_BNAP_NAND_FLASH; + ebc0_cs0_bncr_value = EBC0_BNCR_NAND_FLASH_CS1; - ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH; - ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1; + ebc0_cs1_bnap_value = 0; + ebc0_cs1_bncr_value = 0; ebc0_cs2_bnap_value = 0; ebc0_cs2_bncr_value = 0; ebc0_cs3_bnap_value = 0; @@ -1409,10 +1415,10 @@ void update_ndfc_ios(void) gpio_tab[GPIO0][6].in_out = GPIO_OUT; /* EBC_CS_N(1) */ gpio_tab[GPIO0][6].alt_nb = GPIO_ALT1; -#if 0 gpio_tab[GPIO0][7].in_out = GPIO_OUT; /* EBC_CS_N(2) */ gpio_tab[GPIO0][7].alt_nb = GPIO_ALT1; +#if 0 gpio_tab[GPIO0][7].in_out = GPIO_OUT; /* EBC_CS_N(3) */ gpio_tab[GPIO0][7].alt_nb = GPIO_ALT1; #endif @@ -1900,12 +1906,21 @@ void configure_ppc440ep_pins(void) { update_ndfc_ios(); +#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)) mtsdr(sdr_cust0, SDR0_CUST0_MUX_NDFC_SEL | SDR0_CUST0_NDFC_ENABLE | SDR0_CUST0_NDFC_BW_8_BIT | SDR0_CUST0_NDFC_ARE_MASK | SDR0_CUST0_CHIPSELGAT_EN1 | SDR0_CUST0_CHIPSELGAT_EN2); +#else + mtsdr(sdr_cust0, SDR0_CUST0_MUX_NDFC_SEL | + SDR0_CUST0_NDFC_ENABLE | + SDR0_CUST0_NDFC_BW_8_BIT | + SDR0_CUST0_NDFC_ARE_MASK | + SDR0_CUST0_CHIPSELGAT_EN0 | + SDR0_CUST0_CHIPSELGAT_EN2); +#endif ndfc_selection_in_fpga(); } diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk index 9d7f4c3..b46527d 100644 --- a/board/amcc/bamboo/config.mk +++ b/board/amcc/bamboo/config.mk @@ -1,5 +1,5 @@ # -# (C) Copyright 2002-2006 +# (C) Copyright 2002-2007 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -21,7 +21,11 @@ # MA 02111-1307 USA # +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE TEXT_BASE = 0xFFFA0000 +endif PLATFORM_CPPFLAGS += -DCONFIG_440=1 diff --git a/board/amcc/bamboo/flash.c b/board/amcc/bamboo/flash.c index a30ab7a..8a2e832 100644 --- a/board/amcc/bamboo/flash.c +++ b/board/amcc/bamboo/flash.c @@ -53,7 +53,7 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = { {0x87800001, 0xFFF00000, 0xFFF80000}, /* 0:boot from small flash */ {0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66 */ - {0x00000000, 0x00000000, 0x00000000}, /* 2:boot from nand flash */ + {0x87800001, 0x00000000, 0x00000000}, /* 0:boot from nand flash */ {0x87F00000, 0x87F80000, 0xFFC00001}, /* 3:boot from big flash 33*/ {0x87F00000, 0x87F80000, 0xFFC00001}, /* 4:boot from big flash 66*/ {0x00000000, 0x00000000, 0x00000000}, /* 5:boot from */ @@ -134,10 +134,10 @@ unsigned long flash_init(void) flash_info[i].size = 0; /* check whether the address is 0 */ - if (flash_addr_table[index][i] == 0) { + if (flash_addr_table[index][i] == 0) continue; - } + DEBUGF("Detection bank %d...\n", i); /* call flash_get_size() to initialize sector address */ size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], &flash_info[i]); diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S index 7820107..1459eec 100644 --- a/board/amcc/bamboo/init.S +++ b/board/amcc/bamboo/init.S @@ -1,74 +1,31 @@ /* -* -* See file CREDITS for list of people who contributed to this -* project. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation; either version 2 of -* the License, or (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, -* MA 02111-1307 USA -*/ + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ #include <ppc_asm.tmpl> #include <config.h> - -/* General */ -#define TLB_VALID 0x00000200 - -/* Supported page sizes */ - -#define SZ_1K 0x00000000 -#define SZ_4K 0x00000010 -#define SZ_16K 0x00000020 -#define SZ_64K 0x00000030 -#define SZ_256K 0x00000040 -#define SZ_1M 0x00000050 -#define SZ_8M 0x00000060 -#define SZ_16M 0x00000070 -#define SZ_256M 0x00000090 - -/* Storage attributes */ -#define SA_W 0x00000800 /* Write-through */ -#define SA_I 0x00000400 /* Caching inhibited */ -#define SA_M 0x00000200 /* Memory coherence */ -#define SA_G 0x00000100 /* Guarded */ -#define SA_E 0x00000080 /* Endian */ - -/* Access control */ -#define AC_X 0x00000024 /* Execute */ -#define AC_W 0x00000012 /* Write */ -#define AC_R 0x00000009 /* Read */ - -/* Some handy macros */ - -#define EPN(e) ((e) & 0xfffffc00) -#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) -#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) -#define TLB2(a) ( (a)&0x00000fbf ) - -#define tlbtab_start\ - mflr r1 ;\ - bl 0f ; - -#define tlbtab_end\ - .long 0, 0, 0 ; \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - -#define tlbentry(epn,sz,rpn,erpn,attr)\ - .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) - +#include <asm-ppc/mmu.h> /************************************************************************** * TLB TABLE @@ -80,34 +37,68 @@ * Pointer to the table is returned in r1 * *************************************************************************/ - - .section .bootpg,"ax" - .globl tlbtab + .section .bootpg,"ax" + .globl tlbtab tlbtab: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/) - - /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) - - tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I ) - tlbentry( CFG_NAND_ADDR, SZ_256M, CFG_NAND_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I ) - - /* PCI */ - tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I ) - - /* USB 2.0 Device */ - tlbentry( CFG_USB_DEVICE, SZ_1K, CFG_USB_DEVICE, 0, AC_R|AC_W|SA_G|SA_I ) - - tlbtab_end + tlbtab_start + + /* + * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the + * speed up boot process. It is patched after relocation to enable SA_I + */ +#ifndef CONFIG_NAND_SPL + tlbentry(CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G) +#else + tlbentry(CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 0, AC_R|AC_W|AC_X|SA_G) +#endif + + /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ + tlbentry(CFG_INIT_RAM_ADDR, SZ_4K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G) + + tlbentry(CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I) + + /* PCI base & peripherals */ + tlbentry(CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I) + + tlbentry(CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I) + tlbentry(CFG_NAND_ADDR, SZ_4K, CFG_NAND_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I) + + /* PCI */ + tlbentry(CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I) + + /* USB 2.0 Device */ + tlbentry(CFG_USB_DEVICE, SZ_1K, CFG_USB_DEVICE, 0, AC_R|AC_W|SA_G|SA_I) + + tlbtab_end + +#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) + /* + * For NAND booting the first TLB has to be reconfigured to full size + * and with caching disabled after running from RAM! + */ +#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M) +#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 0) +#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I) + + .globl reconfig_tlb0 +reconfig_tlb0: + sync + isync + addi r4,r0,0x0000 /* TLB entry #0 */ + lis r5,TLB00@h + ori r5,r5,TLB00@l + tlbwe r5,r4,0x0000 /* Save it out */ + lis r5,TLB01@h + ori r5,r5,TLB01@l + tlbwe r5,r4,0x0001 /* Save it out */ + lis r5,TLB02@h + ori r5,r5,TLB02@l + tlbwe r5,r4,0x0002 /* Save it out */ + sync + isync + blr +#endif diff --git a/board/amcc/bamboo/u-boot-nand.lds b/board/amcc/bamboo/u-boot-nand.lds new file mode 100644 index 0000000..a5dae0e --- /dev/null +++ b/board/amcc/bamboo/u-boot-nand.lds @@ -0,0 +1,137 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + + /* Align to next NAND block */ + . = ALIGN(0x4000); + common/environment.o (.ppcenv) + /* Keep some space here for redundant env and potential bad env blocks */ + . = ALIGN(0x10000); + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + _end = . ; + PROVIDE (end = .); +} diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c index d045df1..78e2cb4 100644 --- a/board/amcc/sequoia/sdram.c +++ b/board/amcc/sequoia/sdram.c @@ -387,7 +387,11 @@ void denali_core_search_data_eye(unsigned long memory_size) long int initdram (int board_type) { #if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) +#if !defined(CONFIG_NAND_SPL) ulong speed = get_bus_freq(0); +#else + ulong speed = 133333333; /* 133MHz is on the safe side */ +#endif mtsdram(DDR0_02, 0x00000000); diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 8704014..ba365ae 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -132,12 +132,6 @@ int board_early_init_f(void) (0x80000000 >> (28 + CFG_NAND_CS)); mtsdr(SDR0_CUST0, sdr0_cust0); - /* Update EBC speed after booting from i2c bootstrap settings - * on newer boards with 33.333 MHZ Clocks - */ - if (in8(CFG_BCSR_BASE + 3) & 0x80) - mtcpr(0xe0, 0x02000000); - return 0; } diff --git a/board/stxssa/config.mk b/board/stxssa/config.mk index 30f42c5..5f4fc74 100644 --- a/board/stxssa/config.mk +++ b/board/stxssa/config.mk @@ -22,13 +22,12 @@ # MA 02111-1307 USA # -# # default CCARBAR is at 0xff700000 # assume U-Boot is less than 0.5MB # U-Boot is less than 256K, so push # it further up into the flash # -TEXT_BASE = 0xfffC0000 +TEXT_BASE = 0xFFFC0000 PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1 PLATFORM_CPPFLAGS += -DCONFIG_E500=1 diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index 10b4c18..c500d3f 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -20,7 +20,7 @@ * Jun Gu, Artesyn Technology, jung@artesyncp.com * Support for AMCC 440 based on OpenBIOS draminit.c from IBM. * - * (C) Copyright 2005 + * (C) Copyright 2005-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -42,6 +42,11 @@ * MA 02111-1307 USA */ +/* define DEBUG for debugging output (obviously ;-)) */ +#if 0 +#define DEBUG +#endif + #include <common.h> #include <asm/processor.h> #include <i2c.h> @@ -246,25 +251,6 @@ #define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */ #endif -const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = { - {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, - 0xFFFFFFFF, 0xFFFFFFFF}, - {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, - 0x00000000, 0x00000000}, - {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, - 0x55555555, 0x55555555}, - {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, - 0xAAAAAAAA, 0xAAAAAAAA}, - {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, - 0x5A5A5A5A, 0x5A5A5A5A}, - {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, - 0xA5A5A5A5, 0xA5A5A5A5}, - {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, - 0x55AA55AA, 0x55AA55AA}, - {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, - 0xAA55AA55, 0xAA55AA55} -}; - /* bank_parms is used to sort the bank sizes by descending order */ struct bank_param { unsigned long cr; @@ -278,46 +264,37 @@ extern unsigned char cfg_simulate_spd_eeprom[128]; #endif void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value); -unsigned char spd_read(uchar chip, uint addr); - -void get_spd_info(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void check_mem_type -(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void check_volt_type -(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void program_cfg0(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void program_cfg1(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void program_rtr (unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void program_tr0 (unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void program_tr1 (void); - -void program_ecc (unsigned long num_bytes); +static unsigned char spd_read(uchar chip, uint addr); +static void get_spd_info(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void check_mem_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void check_volt_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_cfg0(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_cfg1(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_rtr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_tr0(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_tr1(void); + +#ifdef CONFIG_DDR_ECC +static void program_ecc(unsigned long num_bytes); +#endif -unsigned -long program_bxcr(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); +static unsigned long program_bxcr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); /* * This function is reading data from the DIMM module EEPROM over the SPD bus @@ -328,7 +305,6 @@ long program_bxcr(unsigned long* dimm_populated, * BUG: Don't handle ECC memory * BUG: A few values in the TR register is currently hardcoded */ - long int spd_sdram(void) { unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS; unsigned long dimm_populated[sizeof(iic0_dimm_addr)]; @@ -421,9 +397,8 @@ long int spd_sdram(void) { */ while (1) { mfsdram(mem_mcsts, mcsts); - if ((mcsts & SDRAM_MCSTS_MRSC) != 0) { + if ((mcsts & SDRAM_MCSTS_MRSC) != 0) break; - } } /* @@ -431,14 +406,17 @@ long int spd_sdram(void) { */ program_tr1(); +#ifdef CONFIG_DDR_ECC /* - * if ECC is enabled, initialize parity bits + * If ecc is enabled, initialize the parity bits. */ + program_ecc(total_size); +#endif return total_size; } -unsigned char spd_read(uchar chip, uint addr) +static unsigned char spd_read(uchar chip, uint addr) { unsigned char data[2]; @@ -460,9 +438,9 @@ unsigned char spd_read(uchar chip, uint addr) return 0; } -void get_spd_info(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void get_spd_info(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long dimm_found; @@ -480,14 +458,10 @@ void get_spd_info(unsigned long* dimm_populated, if ((num_of_bytes != 0) && (total_size != 0)) { dimm_populated[dimm_num] = TRUE; dimm_found = TRUE; -#if 0 - printf("DIMM slot %lu: populated\n", dimm_num); -#endif + debug("DIMM slot %lu: populated\n", dimm_num); } else { dimm_populated[dimm_num] = FALSE; -#if 0 - printf("DIMM slot %lu: Not populated\n", dimm_num); -#endif + debug("DIMM slot %lu: Not populated\n", dimm_num); } } @@ -497,9 +471,9 @@ void get_spd_info(unsigned long* dimm_populated, } } -void check_mem_type(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void check_mem_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned char dimm_type; @@ -509,9 +483,7 @@ void check_mem_type(unsigned long* dimm_populated, dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2); switch (dimm_type) { case 7: -#if 0 - printf("DIMM slot %lu: DDR SDRAM detected\n", dimm_num); -#endif + debug("DIMM slot %lu: DDR SDRAM detected\n", dimm_num); break; default: printf("ERROR: Unsupported DIMM detected in slot %lu.\n", @@ -525,10 +497,9 @@ void check_mem_type(unsigned long* dimm_populated, } } - -void check_volt_type(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void check_volt_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long voltage_type; @@ -541,18 +512,16 @@ void check_volt_type(unsigned long* dimm_populated, dimm_num); hang(); } else { -#if 0 - printf("DIMM %lu voltage level supported.\n", dimm_num); -#endif + debug("DIMM %lu voltage level supported.\n", dimm_num); } break; } } } -void program_cfg0(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void program_cfg0(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long cfg0; @@ -640,9 +609,9 @@ void program_cfg0(unsigned long* dimm_populated, mtsdram(mem_cfg0, cfg0); } -void program_cfg1(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void program_cfg1(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long cfg1; mfsdram(mem_cfg1, cfg1); @@ -658,9 +627,9 @@ void program_cfg1(unsigned long* dimm_populated, mtsdram(mem_cfg1, cfg1); } -void program_rtr (unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void program_rtr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long bus_period_x_10; @@ -676,7 +645,6 @@ void program_rtr (unsigned long* dimm_populated, get_sys_info(&sys_info); bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10); - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { if (dimm_populated[dimm_num] == TRUE) { refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12); @@ -719,9 +687,9 @@ void program_rtr (unsigned long* dimm_populated, mtsdram(mem_rtr, sdram_rtr); } -void program_tr0 (unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void program_tr0(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long tr0; @@ -1001,13 +969,73 @@ void program_tr0 (unsigned long* dimm_populated, break; } -#if 0 - printf("tr0: %x\n", tr0); -#endif + debug("tr0: %x\n", tr0); mtsdram(mem_tr0, tr0); } -void program_tr1 (void) +static int short_mem_test(void) +{ + unsigned long i, j; + unsigned long bxcr_num; + unsigned long *membase; + const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = { + {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF}, + {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000}, + {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555}, + {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA}, + {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A}, + {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5}, + {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA}, + {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55}}; + + for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) { + mtdcr(memcfga, mem_b0cr + (bxcr_num << 2)); + if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) { + /* Bank is enabled */ + membase = (unsigned long*) + (mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK); + + /* + * Run the short memory test + */ + for (i = 0; i < NUMMEMTESTS; i++) { + for (j = 0; j < NUMMEMWORDS; j++) { + membase[j] = test[i][j]; + ppcDcbf((unsigned long)&(membase[j])); + } + + for (j = 0; j < NUMMEMWORDS; j++) { + if (membase[j] != test[i][j]) { + ppcDcbf((unsigned long)&(membase[j])); + return 0; + } + ppcDcbf((unsigned long)&(membase[j])); + } + + if (j < NUMMEMWORDS) + return 0; + } + + /* + * see if the rdclt value passed + */ + if (i < NUMMEMTESTS) + return 0; + } + } + + return 1; +} + +static void program_tr1(void) { unsigned long tr0; unsigned long tr1; @@ -1015,8 +1043,7 @@ void program_tr1 (void) unsigned long ecc_temp; unsigned long dlycal; unsigned long dly_val; - unsigned long i, j, k; - unsigned long bxcr_num; + unsigned long k; unsigned long max_pass_length; unsigned long current_pass_length; unsigned long current_fail_length; @@ -1029,7 +1056,6 @@ void program_tr1 (void) unsigned char window_found; unsigned char fail_found; unsigned char pass_found; - unsigned long * membase; PPC440_SYS_INFO sys_info; /* @@ -1079,55 +1105,16 @@ void program_tr1 (void) window_found = FALSE; fail_found = FALSE; pass_found = FALSE; -#ifdef DEBUG - printf("Starting memory test "); -#endif + debug("Starting memory test "); + for (k = 0; k < NUMHALFCYCLES; k++) { - for (rdclt = 0; rdclt < dly_val; rdclt++) { + for (rdclt = 0; rdclt < dly_val; rdclt++) { /* * Set the timing reg for the test. */ mtsdram(mem_tr1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt))); - for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) { - mtdcr(memcfga, mem_b0cr + (bxcr_num<<2)); - if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) { - /* Bank is enabled */ - membase = (unsigned long*) - (mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK); - - /* - * Run the short memory test - */ - for (i = 0; i < NUMMEMTESTS; i++) { - for (j = 0; j < NUMMEMWORDS; j++) { - membase[j] = test[i][j]; - ppcDcbf((unsigned long)&(membase[j])); - } - - for (j = 0; j < NUMMEMWORDS; j++) { - if (membase[j] != test[i][j]) { - ppcDcbf((unsigned long)&(membase[j])); - break; - } - ppcDcbf((unsigned long)&(membase[j])); - } - - if (j < NUMMEMWORDS) { - break; - } - } - - /* - * see if the rdclt value passed - */ - if (i < NUMMEMTESTS) { - break; - } - } - } - - if (bxcr_num == MAXBXCR) { + if (short_mem_test()) { if (fail_found == TRUE) { pass_found = TRUE; if (current_pass_length == 0) { @@ -1157,9 +1144,8 @@ void program_tr1 (void) } } } -#ifdef DEBUG - printf("."); -#endif + debug("."); + if (window_found == TRUE) { break; } @@ -1167,9 +1153,7 @@ void program_tr1 (void) tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK; rdclt_offset += dly_val; } -#ifdef DEBUG - printf("\n"); -#endif + debug("\n"); /* * make sure we find the window @@ -1218,18 +1202,17 @@ void program_tr1 (void) } tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average); -#if 0 - printf("tr1: %x\n", tr1); -#endif + debug("tr1: %x\n", tr1); + /* * program SDRAM Timing Register 1 TR1 */ mtsdram(mem_tr1, tr1); } -unsigned long program_bxcr(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static unsigned long program_bxcr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long bank_base_addr; @@ -1262,8 +1245,8 @@ unsigned long program_bxcr(unsigned long* dimm_populated, #ifdef CONFIG_BAMBOO /* * This next section is hardware dependent and must be programmed - * to match the hardware. For bammboo, the following holds... - * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0 + * to match the hardware. For bamboo, the following holds... + * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0 (soldered onboard) * 2. SDRAM0_B1CR: Bank 0 of dimm 1 ctrl_bank_num : 1 * 3. SDRAM0_B2CR: Bank 1 of dimm 1 ctrl_bank_num : 1 * 4. SDRAM0_B3CR: Bank 0 of dimm 2 ctrl_bank_num : 3 @@ -1273,10 +1256,12 @@ unsigned long program_bxcr(unsigned long* dimm_populated, ctrl_bank_num[1] = 1; ctrl_bank_num[2] = 3; #else + /* + * Ocotea, Ebony and the other IBM/AMCC eval boards have + * 2 DIMM slots with each max 2 banks + */ ctrl_bank_num[0] = 0; - ctrl_bank_num[1] = 1; - ctrl_bank_num[2] = 2; - ctrl_bank_num[3] = 3; + ctrl_bank_num[1] = 2; #endif /* @@ -1290,6 +1275,8 @@ unsigned long program_bxcr(unsigned long* dimm_populated, num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4); num_banks = spd_read(iic0_dimm_addr[dimm_num], 5); bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31); + debug("DIMM%d: row=%d col=%d banks=%d\n", dimm_num, + num_row_addr, num_col_addr, num_banks); /* * Set the SDRAM0_BxCR regs @@ -1354,9 +1341,12 @@ unsigned long program_bxcr(unsigned long* dimm_populated, cr |= SDRAM_BXCR_SDBE; for (i = 0; i < num_banks; i++) { - bank_parms[ctrl_bank_num[dimm_num]+i+dimm_num].bank_size_bytes = - (4 * 1024 * 1024) * bank_size_id; - bank_parms[ctrl_bank_num[dimm_num]+i+dimm_num].cr = cr; + bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes = + (4 << 20) * bank_size_id; + bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr; + debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n", + dimm_num, i, ctrl_bank_num[dimm_num]+i, + bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes); } } } @@ -1400,13 +1390,15 @@ unsigned long program_bxcr(unsigned long* dimm_populated, bank_parms[sorted_bank_num[bx_cr_num]].cr; mtdcr(memcfgd, temp); bank_base_addr += bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes; + debug("SDRAM0_B%dCR=0x%08lx\n", sorted_bank_num[bx_cr_num], temp); } } return(bank_base_addr); } -void program_ecc (unsigned long num_bytes) +#ifdef CONFIG_DDR_ECC +static void program_ecc(unsigned long num_bytes) { unsigned long bank_base_addr; unsigned long current_address; @@ -1425,14 +1417,12 @@ void program_ecc (unsigned long num_bytes) bank_base_addr = CFG_SDRAM_BASE; if ((cfg0 & SDRAM_CFG0_MCHK_MASK) != SDRAM_CFG0_MCHK_NON) { - mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | - SDRAM_CFG0_MCHK_GEN); + mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_GEN); - if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32) { + if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32) address_increment = 4; - } else { + else address_increment = 8; - } current_address = (unsigned long)(bank_base_addr); end_address = (unsigned long)(bank_base_addr) + num_bytes; @@ -1446,4 +1436,5 @@ void program_ecc (unsigned long num_bytes) SDRAM_CFG0_MCHK_CHK); } } +#endif /* CONFIG_DDR_ECC */ #endif /* CONFIG_SPD_EEPROM */ diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 2ecd3e4..48b9ee2 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -465,7 +465,11 @@ long int initdram(int board_type) * Set the SDRAM Clock Timing Register *-----------------------------------------------------------------*/ mfsdram(SDRAM_CLKTR, val); +#ifdef CFG_44x_DDR2_CKTR_180 + mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_180_DEG_ADV); +#else mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_0_DEG); +#endif /*------------------------------------------------------------------ * Program the BxCF registers. @@ -1117,7 +1121,8 @@ static void program_codt(unsigned long *dimm_populated, modt3 = 0x00000000; } if (total_rank == 4) { - codt |= CALC_ODT_R(0) | CALC_ODT_R(1) | CALC_ODT_R(2) | CALC_ODT_R(3); + codt |= CALC_ODT_R(0) | CALC_ODT_R(1) | + CALC_ODT_R(2) | CALC_ODT_R(3); modt0 = CALC_ODT_RW(2); modt1 = 0x00000000; modt2 = CALC_ODT_RW(0); diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index 8e6bc84..c07bc0c 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -139,6 +139,7 @@ static char *bootstrap_str[] = { "Reserved", "I2C (Addr 0x50)", }; +static char bootstrap_char[] = { 'A', 'B', 'C', 'B', 'D', 'E', 'x', 'F' }; #endif #if defined(CONFIG_440SP) || defined(CONFIG_440SPE) @@ -149,6 +150,7 @@ static char *bootstrap_str[] = { "I2C (Addr 0x54)", "I2C (Addr 0x50)", }; +static char bootstrap_char[] = { 'A', 'B', 'C', 'D'}; #endif #if defined(CONFIG_440EP) || defined(CONFIG_440GR) @@ -163,6 +165,7 @@ static char *bootstrap_str[] = { "PCI", "I2C (Addr 0x52)", }; +static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' }; #endif #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) @@ -177,6 +180,7 @@ static char *bootstrap_str[] = { "PCI", "I2C (Addr 0x52)", }; +static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' }; #endif #if defined(CONFIG_405EZ) @@ -199,6 +203,8 @@ static char *bootstrap_str[] = { "SPI (slow)", "I2C (Addr 0x50)", }; +static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', \ + 'I', 'x', 'K', 'L', 'M', 'N', 'O', 'P' }; #endif #if defined(SDR0_PINSTP_SHIFT) @@ -427,7 +433,7 @@ int checkcpu (void) printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis"); #endif /* I2C_BOOTROM */ #if defined(SDR0_PINSTP_SHIFT) - printf (" Bootstrap Option %c - ", (char)bootstrap_option() + 'A'); + printf (" Bootstrap Option %c - ", bootstrap_char[bootstrap_option()]); printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]); #endif /* SDR0_PINSTP_SHIFT */ diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c index 08dfc32..f63fc79 100644 --- a/cpu/ppc4xx/ndfc.c +++ b/cpu/ppc4xx/ndfc.c @@ -3,7 +3,7 @@ * Platform independend driver for NDFC (NanD Flash Controller) * integrated into EP440 cores * - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * Based on original work by @@ -38,7 +38,9 @@ #include <nand.h> #include <linux/mtd/ndfc.h> +#include <linux/mtd/nand_ecc.h> #include <asm/processor.h> +#include <asm/io.h> #include <ppc4xx.h> static u8 hwctl = 0; @@ -70,11 +72,11 @@ static void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte) ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; if (hwctl & 0x1) - out8(base + NDFC_CMD, byte); + out_8((u8 *)(base + NDFC_CMD), byte); else if (hwctl & 0x2) - out8(base + NDFC_ALE, byte); + out_8((u8 *)(base + NDFC_ALE), byte); else - out8(base + NDFC_DATA, byte); + out_8((u8 *)(base + NDFC_DATA), byte); } static u_char ndfc_read_byte(struct mtd_info *mtdinfo) @@ -82,7 +84,7 @@ static u_char ndfc_read_byte(struct mtd_info *mtdinfo) struct nand_chip *this = mtdinfo->priv; ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; - return (in8(base + NDFC_DATA)); + return (in_8((u8 *)(base + NDFC_DATA))); } static int ndfc_dev_ready(struct mtd_info *mtdinfo) @@ -90,17 +92,41 @@ static int ndfc_dev_ready(struct mtd_info *mtdinfo) struct nand_chip *this = mtdinfo->priv; ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; - while (!(in32(base + NDFC_STAT) & NDFC_STAT_IS_READY)) + while (!(in_be32((u32 *)(base + NDFC_STAT)) & NDFC_STAT_IS_READY)) ; return 1; } -#ifndef CONFIG_NAND_SPL -/* - * Don't use these speedup functions in NAND boot image, since the image - * has to fit into 4kByte. - */ +static void ndfc_enable_hwecc(struct mtd_info *mtdinfo, int mode) +{ + struct nand_chip *this = mtdinfo->priv; + ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; + u32 ccr; + + ccr = in_be32((u32 *)(base + NDFC_CCR)); + ccr |= NDFC_CCR_RESET_ECC; + out_be32((u32 *)(base + NDFC_CCR), ccr); +} + +static int ndfc_calculate_ecc(struct mtd_info *mtdinfo, + const u_char *dat, u_char *ecc_code) +{ + struct nand_chip *this = mtdinfo->priv; + ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; + u32 ecc; + u8 *p = (u8 *)&ecc; + + ecc = in_be32((u32 *)(base + NDFC_ECC)); + + /* The NDFC uses Smart Media (SMC) bytes order + */ + ecc_code[0] = p[2]; + ecc_code[1] = p[1]; + ecc_code[2] = p[3]; + + return 0; +} /* * Speedups for buffer read/write/verify @@ -116,9 +142,14 @@ static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len) uint32_t *p = (uint32_t *) buf; for (;len > 0; len -= 4) - *p++ = in32(base + NDFC_DATA); + *p++ = in_be32((u32 *)(base + NDFC_DATA)); } +#ifndef CONFIG_NAND_SPL +/* + * Don't use these speedup functions in NAND boot image, since the image + * has to fit into 4kByte. + */ static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len) { struct nand_chip *this = mtdinfo->priv; @@ -126,7 +157,7 @@ static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len uint32_t *p = (uint32_t *) buf; for (; len > 0; len -= 4) - out32(base + NDFC_DATA, *p++); + out_be32((u32 *)(base + NDFC_DATA), *p++); } static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len) @@ -136,7 +167,7 @@ static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len uint32_t *p = (uint32_t *) buf; for (; len > 0; len -= 4) - if (*p++ != in32(base + NDFC_DATA)) + if (*p++ != in_be32((u32 *)(base + NDFC_DATA))) return -1; return 0; @@ -153,8 +184,8 @@ void board_nand_select_device(struct nand_chip *nand, int chip) ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc; /* Set NandFlash Core Configuration Register */ - /* 1col x 2 rows */ - out32(base + NDFC_CCR, 0x00000000 | (cs << 24)); + /* 1 col x 2 rows */ + out_be32((u32 *)(base + NDFC_CCR), 0x00000000 | (cs << 24)); } int board_nand_init(struct nand_chip *nand) @@ -162,16 +193,19 @@ int board_nand_init(struct nand_chip *nand) int cs = (ulong)nand->IO_ADDR_W & 0x00000003; ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc; - nand->eccmode = NAND_ECC_SOFT; - nand->hwcontrol = ndfc_hwcontrol; nand->read_byte = ndfc_read_byte; + nand->read_buf = ndfc_read_buf; nand->write_byte = ndfc_write_byte; nand->dev_ready = ndfc_dev_ready; + nand->eccmode = NAND_ECC_HW3_256; + nand->enable_hwecc = ndfc_enable_hwecc; + nand->calculate_ecc = ndfc_calculate_ecc; + nand->correct_data = nand_correct_data; + #ifndef CONFIG_NAND_SPL nand->write_buf = ndfc_write_buf; - nand->read_buf = ndfc_read_buf; nand->verify_buf = ndfc_verify_buf; #else /* @@ -187,7 +221,7 @@ int board_nand_init(struct nand_chip *nand) * Select required NAND chip in NDFC */ board_nand_select_device(nand, cs); - out32(base + NDFC_BCFG0 + (cs << 2), 0x80002222); + out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), 0x80002222); return 0; } diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 85660b4..78de300 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -110,6 +110,13 @@ # endif #endif /* CFG_INIT_DCACHE_CS */ +#define function_prolog(func_name) .text; \ + .align 2; \ + .globl func_name; \ + func_name: +#define function_epilog(func_name) .type func_name,@function; \ + .size func_name,.-func_name + /* We don't want the MMU yet. */ #undef MSR_KERNEL @@ -388,8 +395,9 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/ 2: #if defined(CONFIG_NAND_SPL) +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* - * Enable internal SRAM + * Enable internal SRAM (only on 440EPx/GRx, 440EP/GR have no OCM) */ lis r2,0x7fff ori r2,r2,0xffff @@ -399,6 +407,45 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/ mfdcr r1,isram0_pmeg and r1,r1,r2 /* Disable pwr mgmt */ mtdcr isram0_pmeg,r1 +#endif +#if defined(CONFIG_440EP) + /* + * On 440EP with no internal SRAM, we setup SDRAM very early + * and copy the NAND_SPL to SDRAM and jump to it + */ + /* Clear Dcache to use as RAM */ + addis r3,r0,CFG_INIT_RAM_ADDR@h + ori r3,r3,CFG_INIT_RAM_ADDR@l + addis r4,r0,CFG_INIT_RAM_END@h + ori r4,r4,CFG_INIT_RAM_END@l + rlwinm. r5,r4,0,27,31 + rlwinm r5,r4,27,5,31 + beq ..d_ran3 + addi r5,r5,0x0001 +..d_ran3: + mtctr r5 +..d_ag3: + dcbz r0,r3 + addi r3,r3,32 + bdnz ..d_ag3 + /*----------------------------------------------------------------*/ + /* Setup the stack in internal SRAM */ + /*----------------------------------------------------------------*/ + lis r1,CFG_INIT_RAM_ADDR@h + ori r1,r1,CFG_INIT_SP_OFFSET@l + li r0,0 + stwu r0,-4(r1) + stwu r0,-4(r1) /* Terminate call chain */ + + stwu r1,-8(r1) /* Save back chain and move SP */ + lis r0,RESET_VECTOR@h /* Address of reset vector */ + ori r0,r0, RESET_VECTOR@l + stwu r1,-8(r1) /* Save back chain and move SP */ + stw r0,+12(r1) /* Save return addr (underflow vect) */ + sync + bl early_sdram_init + sync +#endif /* CONFIG_440EP */ /* * Copy SPL from cache into internal SRAM @@ -429,7 +476,7 @@ spl_loop: start_ram: sync isync -#endif +#endif /* CONFIG_NAND_SPL */ bl 3f b _start @@ -1137,7 +1184,6 @@ crit_return: lwz r1,GPR1(r1) SYNC rfci -#endif /* CONFIG_NAND_SPL */ /* Cache functions. */ @@ -1255,24 +1301,6 @@ wr_tcr: blr /*------------------------------------------------------------------------------- */ -/* Function: in8 */ -/* Description: Input 8 bits */ -/*------------------------------------------------------------------------------- */ - .globl in8 -in8: - lbz r3,0x0000(r3) - blr - -/*------------------------------------------------------------------------------- */ -/* Function: out8 */ -/* Description: Output 8 bits */ -/*------------------------------------------------------------------------------- */ - .globl out8 -out8: - stb r4,0x0000(r3) - blr - -/*------------------------------------------------------------------------------- */ /* Function: out16 */ /* Description: Output 16 bits */ /*------------------------------------------------------------------------------- */ @@ -1291,15 +1319,6 @@ out16r: blr /*------------------------------------------------------------------------------- */ -/* Function: out32 */ -/* Description: Output 32 bits */ -/*------------------------------------------------------------------------------- */ - .globl out32 -out32: - stw r4,0x0000(r3) - blr - -/*------------------------------------------------------------------------------- */ /* Function: out32r */ /* Description: Byte reverse and output 32 bits */ /*------------------------------------------------------------------------------- */ @@ -1327,15 +1346,6 @@ in16r: blr /*------------------------------------------------------------------------------- */ -/* Function: in32 */ -/* Description: Input 32 bits */ -/*------------------------------------------------------------------------------- */ - .globl in32 -in32: - lwz 3,0x0000(3) - blr - -/*------------------------------------------------------------------------------- */ /* Function: in32r */ /* Description: Input 32 bits and byte reverse */ /*------------------------------------------------------------------------------- */ @@ -1377,9 +1387,6 @@ ppcSync: sync blr -/*------------------------------------------------------------------------------*/ - -#ifndef CONFIG_NAND_SPL /* * void relocate_code (addr_sp, gd, addr_moni) * @@ -1644,8 +1651,88 @@ trap_reloc: stw r0, 4(r7) blr + +#if defined(CONFIG_440) +/*----------------------------------------------------------------------------+ +| dcbz_area. ++----------------------------------------------------------------------------*/ + function_prolog(dcbz_area) + rlwinm. r5,r4,0,27,31 + rlwinm r5,r4,27,5,31 + beq ..d_ra2 + addi r5,r5,0x0001 +..d_ra2:mtctr r5 +..d_ag2:dcbz r0,r3 + addi r3,r3,32 + bdnz ..d_ag2 + sync + blr + function_epilog(dcbz_area) + +/*----------------------------------------------------------------------------+ +| dflush. Assume 32K at vector address is cachable. ++----------------------------------------------------------------------------*/ + function_prolog(dflush) + mfmsr r9 + rlwinm r8,r9,0,15,13 + rlwinm r8,r8,0,17,15 + mtmsr r8 + addi r3,r0,0x0000 + mtspr dvlim,r3 + mfspr r3,ivpr + addi r4,r0,1024 + mtctr r4 +..dflush_loop: + lwz r6,0x0(r3) + addi r3,r3,32 + bdnz ..dflush_loop + addi r3,r3,-32 + mtctr r4 +..ag: dcbf r0,r3 + addi r3,r3,-32 + bdnz ..ag + sync + mtmsr r9 + blr + function_epilog(dflush) +#endif /* CONFIG_440 */ #endif /* CONFIG_NAND_SPL */ +/*------------------------------------------------------------------------------- */ +/* Function: in8 */ +/* Description: Input 8 bits */ +/*------------------------------------------------------------------------------- */ + .globl in8 +in8: + lbz r3,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: out8 */ +/* Description: Output 8 bits */ +/*------------------------------------------------------------------------------- */ + .globl out8 +out8: + stb r4,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: out32 */ +/* Description: Output 32 bits */ +/*------------------------------------------------------------------------------- */ + .globl out32 +out32: + stw r4,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: in32 */ +/* Description: Input 32 bits */ +/*------------------------------------------------------------------------------- */ + .globl in32 +in32: + lwz 3,0x0000(3) + blr /**************************************************************************/ /* PPC405EP specific stuff */ @@ -1892,13 +1979,6 @@ pll_wait: #endif /* CONFIG_405EP */ #if defined(CONFIG_440) -#define function_prolog(func_name) .text; \ - .align 2; \ - .globl func_name; \ - func_name: -#define function_epilog(func_name) .type func_name,@function; \ - .size func_name,.-func_name - /*----------------------------------------------------------------------------+ | mttlb3. +----------------------------------------------------------------------------*/ @@ -1946,47 +2026,4 @@ pll_wait: TLBRE(3,3,0) blr function_epilog(mftlb1) - -/*----------------------------------------------------------------------------+ -| dcbz_area. -+----------------------------------------------------------------------------*/ - function_prolog(dcbz_area) - rlwinm. r5,r4,0,27,31 - rlwinm r5,r4,27,5,31 - beq ..d_ra2 - addi r5,r5,0x0001 -..d_ra2:mtctr r5 -..d_ag2:dcbz r0,r3 - addi r3,r3,32 - bdnz ..d_ag2 - sync - blr - function_epilog(dcbz_area) - -/*----------------------------------------------------------------------------+ -| dflush. Assume 32K at vector address is cachable. -+----------------------------------------------------------------------------*/ - function_prolog(dflush) - mfmsr r9 - rlwinm r8,r9,0,15,13 - rlwinm r8,r8,0,17,15 - mtmsr r8 - addi r3,r0,0x0000 - mtspr dvlim,r3 - mfspr r3,ivpr - addi r4,r0,1024 - mtctr r4 -..dflush_loop: - lwz r6,0x0(r3) - addi r3,r3,32 - bdnz ..dflush_loop - addi r3,r3,-32 - mtctr r4 -..ag: dcbf r0,r3 - addi r3,r3,-32 - bdnz ..ag - sync - mtmsr r9 - blr - function_epilog(dflush) #endif /* CONFIG_440 */ diff --git a/drivers/nand/nand_ecc.c b/drivers/nand/nand_ecc.c index f33be96..90274e6 100644 --- a/drivers/nand/nand_ecc.c +++ b/drivers/nand/nand_ecc.c @@ -40,6 +40,13 @@ #if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY) #include<linux/mtd/mtd.h> + +/* + * NAND-SPL has no sofware ECC for now, so don't include nand_calculate_ecc(), + * only nand_correct_data() is needed + */ + +#ifndef CONFIG_NAND_SPL /* * Pre-calculated 256-way 1 byte column parity */ @@ -62,90 +69,75 @@ static const u_char nand_ecc_precalc_table[] = { 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00 }; - -/** - * nand_trans_result - [GENERIC] create non-inverted ECC - * @reg2: line parity reg 2 - * @reg3: line parity reg 3 - * @ecc_code: ecc - * - * Creates non-inverted ECC code from line parity - */ -static void nand_trans_result(u_char reg2, u_char reg3, - u_char *ecc_code) -{ - u_char a, b, i, tmp1, tmp2; - - /* Initialize variables */ - a = b = 0x80; - tmp1 = tmp2 = 0; - - /* Calculate first ECC byte */ - for (i = 0; i < 4; i++) { - if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */ - tmp1 |= b; - b >>= 1; - if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */ - tmp1 |= b; - b >>= 1; - a >>= 1; - } - - /* Calculate second ECC byte */ - b = 0x80; - for (i = 0; i < 4; i++) { - if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */ - tmp2 |= b; - b >>= 1; - if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */ - tmp2 |= b; - b >>= 1; - a >>= 1; - } - - /* Store two of the ECC bytes */ - ecc_code[0] = tmp1; - ecc_code[1] = tmp2; -} - /** - * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code for 256 byte block + * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256-byte block * @mtd: MTD block structure * @dat: raw data * @ecc_code: buffer for ECC */ -int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) +int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) { - u_char idx, reg1, reg2, reg3; - int j; + uint8_t idx, reg1, reg2, reg3, tmp1, tmp2; + int i; /* Initialize variables */ reg1 = reg2 = reg3 = 0; - ecc_code[0] = ecc_code[1] = ecc_code[2] = 0; /* Build up column parity */ - for(j = 0; j < 256; j++) { - + for(i = 0; i < 256; i++) { /* Get CP0 - CP5 from table */ - idx = nand_ecc_precalc_table[dat[j]]; + idx = nand_ecc_precalc_table[*dat++]; reg1 ^= (idx & 0x3f); /* All bit XOR = 1 ? */ if (idx & 0x40) { - reg3 ^= (u_char) j; - reg2 ^= ~((u_char) j); + reg3 ^= (uint8_t) i; + reg2 ^= ~((uint8_t) i); } } /* Create non-inverted ECC code from line parity */ - nand_trans_result(reg2, reg3, ecc_code); + tmp1 = (reg3 & 0x80) >> 0; /* B7 -> B7 */ + tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */ + tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */ + tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */ + tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */ + tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */ + tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */ + tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */ + + tmp2 = (reg3 & 0x08) << 4; /* B3 -> B7 */ + tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */ + tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */ + tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */ + tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */ + tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */ + tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */ + tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */ /* Calculate final ECC code */ - ecc_code[0] = ~ecc_code[0]; - ecc_code[1] = ~ecc_code[1]; +#ifdef CONFIG_MTD_NAND_ECC_SMC + ecc_code[0] = ~tmp2; + ecc_code[1] = ~tmp1; +#else + ecc_code[0] = ~tmp1; + ecc_code[1] = ~tmp2; +#endif ecc_code[2] = ((~reg1) << 2) | 0x03; + return 0; } +#endif /* CONFIG_NAND_SPL */ + +static inline int countbits(uint32_t byte) +{ + int res = 0; + + for (;byte; byte >>= 1) + res += byte & 0x01; + return res; +} /** * nand_correct_data - [NAND Interface] Detect and correct bit error(s) @@ -156,88 +148,52 @@ int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code * * Detect and correct a 1 bit error for 256 byte block */ -int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) +int nand_correct_data(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) { - u_char a, b, c, d1, d2, d3, add, bit, i; + uint8_t s0, s1, s2; + +#ifdef CONFIG_MTD_NAND_ECC_SMC + s0 = calc_ecc[0] ^ read_ecc[0]; + s1 = calc_ecc[1] ^ read_ecc[1]; + s2 = calc_ecc[2] ^ read_ecc[2]; +#else + s1 = calc_ecc[0] ^ read_ecc[0]; + s0 = calc_ecc[1] ^ read_ecc[1]; + s2 = calc_ecc[2] ^ read_ecc[2]; +#endif + if ((s0 | s1 | s2) == 0) + return 0; - /* Do error detection */ - d1 = calc_ecc[0] ^ read_ecc[0]; - d2 = calc_ecc[1] ^ read_ecc[1]; - d3 = calc_ecc[2] ^ read_ecc[2]; + /* Check for a single bit error */ + if( ((s0 ^ (s0 >> 1)) & 0x55) == 0x55 && + ((s1 ^ (s1 >> 1)) & 0x55) == 0x55 && + ((s2 ^ (s2 >> 1)) & 0x54) == 0x54) { - if ((d1 | d2 | d3) == 0) { - /* No errors */ - return 0; - } - else { - a = (d1 ^ (d1 >> 1)) & 0x55; - b = (d2 ^ (d2 >> 1)) & 0x55; - c = (d3 ^ (d3 >> 1)) & 0x54; - - /* Found and will correct single bit error in the data */ - if ((a == 0x55) && (b == 0x55) && (c == 0x54)) { - c = 0x80; - add = 0; - a = 0x80; - for (i=0; i<4; i++) { - if (d1 & c) - add |= a; - c >>= 2; - a >>= 1; - } - c = 0x80; - for (i=0; i<4; i++) { - if (d2 & c) - add |= a; - c >>= 2; - a >>= 1; - } - bit = 0; - b = 0x04; - c = 0x80; - for (i=0; i<3; i++) { - if (d3 & c) - bit |= b; - c >>= 2; - b >>= 1; - } - b = 0x01; - a = dat[add]; - a ^= (b << bit); - dat[add] = a; - return 1; - } else { - i = 0; - while (d1) { - if (d1 & 0x01) - ++i; - d1 >>= 1; - } - while (d2) { - if (d2 & 0x01) - ++i; - d2 >>= 1; - } - while (d3) { - if (d3 & 0x01) - ++i; - d3 >>= 1; - } - if (i == 1) { - /* ECC Code Error Correction */ - read_ecc[0] = calc_ecc[0]; - read_ecc[1] = calc_ecc[1]; - read_ecc[2] = calc_ecc[2]; - return 2; - } - else { - /* Uncorrectable Error */ - return -1; - } - } + uint32_t byteoffs, bitnum; + + byteoffs = (s1 << 0) & 0x80; + byteoffs |= (s1 << 1) & 0x40; + byteoffs |= (s1 << 2) & 0x20; + byteoffs |= (s1 << 3) & 0x10; + + byteoffs |= (s0 >> 4) & 0x08; + byteoffs |= (s0 >> 3) & 0x04; + byteoffs |= (s0 >> 2) & 0x02; + byteoffs |= (s0 >> 1) & 0x01; + + bitnum = (s2 >> 5) & 0x04; + bitnum |= (s2 >> 4) & 0x02; + bitnum |= (s2 >> 3) & 0x01; + + dat[byteoffs] ^= (1 << bitnum); + + return 1; } - /* Should never happen */ + if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1) + return 1; + return -1; } diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index bbc9ba0..03289bc 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -105,6 +105,11 @@ static inline void sync(void) __asm__ __volatile__ ("sync" : : : "memory"); } +static inline void isync(void) +{ + __asm__ __volatile__ ("isync" : : : "memory"); +} + /* Enforce in-order execution of data I/O. * No distinction between read/write on PPC; use eieio for all three. */ @@ -114,74 +119,90 @@ static inline void sync(void) /* * 8, 16 and 32 bit, big and little endian I/O operations, with barrier. + * + * Read operations have additional twi & isync to make sure the read + * is actually performed (i.e. the data has come back) before we start + * executing any following instructions. */ -extern inline int in_8(volatile u8 *addr) +#define __iomem +extern inline int in_8(const volatile unsigned char __iomem *addr) { - int ret; + int ret; - __asm__ __volatile__("lbz%U1%X1 %0,%1; eieio" : "=r" (ret) : "m" (*addr)); - return ret; + __asm__ __volatile__( + "sync; lbz%U1%X1 %0,%1;\n" + "twi 0,%0,0;\n" + "isync" : "=r" (ret) : "m" (*addr)); + return ret; } -extern inline void out_8(volatile u8 *addr, int val) +extern inline void out_8(volatile unsigned char __iomem *addr, int val) { - __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val)); + __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val)); } -extern inline int in_le16(volatile u16 *addr) +extern inline int in_le16(const volatile unsigned short __iomem *addr) { - int ret; + int ret; - __asm__ __volatile__("lhbrx %0,0,%1; eieio" : "=r" (ret) : - "r" (addr), "m" (*addr)); - return ret; + __asm__ __volatile__("sync; lhbrx %0,0,%1;\n" + "twi 0,%0,0;\n" + "isync" : "=r" (ret) : + "r" (addr), "m" (*addr)); + return ret; } -extern inline int in_be16(volatile u16 *addr) +extern inline int in_be16(const volatile unsigned short __iomem *addr) { - int ret; + int ret; - __asm__ __volatile__("lhz%U1%X1 %0,%1; eieio" : "=r" (ret) : "m" (*addr)); - return ret; + __asm__ __volatile__("sync; lhz%U1%X1 %0,%1;\n" + "twi 0,%0,0;\n" + "isync" : "=r" (ret) : "m" (*addr)); + return ret; } -extern inline void out_le16(volatile u16 *addr, int val) +extern inline void out_le16(volatile unsigned short __iomem *addr, int val) { - __asm__ __volatile__("sthbrx %1,0,%2; eieio" : "=m" (*addr) : - "r" (val), "r" (addr)); + __asm__ __volatile__("sync; sthbrx %1,0,%2" : "=m" (*addr) : + "r" (val), "r" (addr)); } -extern inline void out_be16(volatile u16 *addr, int val) +extern inline void out_be16(volatile unsigned short __iomem *addr, int val) { - __asm__ __volatile__("sth%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val)); + __asm__ __volatile__("sync; sth%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); } -extern inline unsigned in_le32(volatile u32 *addr) +extern inline unsigned in_le32(const volatile unsigned __iomem *addr) { - unsigned ret; + unsigned ret; - __asm__ __volatile__("lwbrx %0,0,%1; eieio" : "=r" (ret) : - "r" (addr), "m" (*addr)); - return ret; + __asm__ __volatile__("sync; lwbrx %0,0,%1;\n" + "twi 0,%0,0;\n" + "isync" : "=r" (ret) : + "r" (addr), "m" (*addr)); + return ret; } -extern inline unsigned in_be32(volatile u32 *addr) +extern inline unsigned in_be32(const volatile unsigned __iomem *addr) { - unsigned ret; + unsigned ret; - __asm__ __volatile__("lwz%U1%X1 %0,%1; eieio" : "=r" (ret) : "m" (*addr)); - return ret; + __asm__ __volatile__("sync; lwz%U1%X1 %0,%1;\n" + "twi 0,%0,0;\n" + "isync" : "=r" (ret) : "m" (*addr)); + return ret; } -extern inline void out_le32(volatile unsigned *addr, int val) +extern inline void out_le32(volatile unsigned __iomem *addr, int val) { - __asm__ __volatile__("stwbrx %1,0,%2; eieio" : "=m" (*addr) : - "r" (val), "r" (addr)); + __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) : + "r" (val), "r" (addr)); } -extern inline void out_be32(volatile unsigned *addr, int val) +extern inline void out_be32(volatile unsigned __iomem *addr, int val) { - __asm__ __volatile__("stw%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val)); + __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); } #endif diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index db58a9f..763d1c7 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -50,7 +50,7 @@ *----------------------------------------------------------------------*/ #define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ #define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ -#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) +#define CFG_MONITOR_BASE TEXT_BASE #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ #define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */ #define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/ @@ -104,14 +104,11 @@ /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ -/* - * Define here the location of the environment variables (FLASH or EEPROM). - * Note: DENX encourages to use redundant environment in FLASH. - */ -#if 1 +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ #else -#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ +#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */ #endif /*----------------------------------------------------------------------- @@ -133,7 +130,7 @@ #ifdef CFG_ENV_IS_IN_FLASH #define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ @@ -141,22 +138,89 @@ #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif /* CFG_ENV_IS_IN_FLASH */ +/* + * IPL (Initial Program Loader, integrated inside CPU) + * Will load first 4k from NAND (SPL) into cache and execute it from there. + * + * SPL (Secondary Program Loader) + * Will load special U-Boot version (NUB) from NAND and execute it. This SPL + * has to fit into 4kByte. It sets up the CPU and configures the SDRAM + * controller and the NAND controller so that the special U-Boot image can be + * loaded from NAND to SDRAM. + * + * NUB (NAND U-Boot) + * This NAND U-Boot (NUB) is a special U-Boot version which can be started + * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. + * + * On 440EPx the SPL is copied to SDRAM before the NAND controller is + * set up. While still running from cache, I experienced problems accessing + * the NAND controller. sr - 2006-08-25 + */ +#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ +#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ +#define CFG_NAND_BOOT_SPL_DST 0x00800000 /* Copy SPL here */ +#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ +#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */ +#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST) + +/* + * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) + */ +#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ +#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ + +/* + * Now the NAND chip has to be defined (no autodetection used!) + */ +#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ +#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ +#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ +#define CFG_NAND_4_ADDR_CYCLE 1 /* Fourth addr used (>32MB) */ + +#define CFG_NAND_ECCSIZE 256 +#define CFG_NAND_ECCBYTES 3 +#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) +#define CFG_NAND_OOBSIZE 16 +#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) +#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} + +#ifdef CFG_ENV_IS_IN_NAND +/* + * For NAND booting the environment is embedded in the U-Boot image. Please take + * look at the file board/amcc/sequoia/u-boot-nand.lds for details. + */ +#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE +#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE) +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) +#endif + /*----------------------------------------------------------------------- * NAND FLASH *----------------------------------------------------------------------*/ -#define CFG_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 -#define CFG_NAND_CS 1 +#define CFG_MAX_NAND_DEVICE 2 +#define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE #define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE, CFG_NAND_ADDR + 2 } #define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CFG_NAND_CS 1 +#else +#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ +/* Memory Bank 0 (NAND-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x018003c0 +#define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000) +#endif + /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------------- */ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ #undef CONFIG_DDR_ECC /* don't use ECC */ #define CFG_SIMULATE_SPD_EEPROM 0xff /* simulate spd eeprom on this address */ -#define SPD_EEPROM_ADDRESS {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51} +#define SPD_EEPROM_ADDRESS {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51} +#define CFG_MBYTES_SDRAM (64) /* 64MB fixed size for early-sdram-init */ /*----------------------------------------------------------------------- * I2C diff --git a/include/configs/luan.h b/include/configs/luan.h index 9c8769b..045a144 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -135,7 +135,8 @@ *----------------------------------------------------------------------*/ #define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/ -#undef CONFIG_DDR_ECC /* no ECC support for now */ +#define CONFIG_DDR_ECC 1 /* with ECC support */ +#define CFG_44x_DDR2_CKTR_180 1 /* use 180 deg advance */ /*----------------------------------------------------------------------- * I2C diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index e1572ba..23243a4 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -168,12 +168,19 @@ /* * Now the NAND chip has to be defined (no autodetection used!) */ -#define CFG_NAND_PAGE_SIZE (512) /* NAND chip page size */ +#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ #define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ -#define CFG_NAND_PAGE_COUNT (32) /* NAND chip page count */ -#define CFG_NAND_BAD_BLOCK_POS (5) /* Location of bad block marker */ +#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ #undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ +#define CFG_NAND_ECCSIZE 256 +#define CFG_NAND_ECCBYTES 3 +#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) +#define CFG_NAND_OOBSIZE 16 +#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) +#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} + #ifdef CFG_ENV_IS_IN_NAND /* * For NAND booting the environment is embedded in the U-Boot image. Please take diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 8624f4b..1978a32 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -80,16 +80,20 @@ * This address, however, is used to configure a 256M local bus * window that includes the Config latch below. */ -#define CFG_LBC_OPTION_BASE 0xf0000000 /* Localbus Extension */ +#define CFG_LBC_OPTION_BASE 0xF0000000 /* Localbus Extension */ #define CFG_LBC_OPTION_SIZE 256 /* 256MB */ /* There are various flash options used, we configure for the largest, * which is 64Mbytes. The CFI works fine and will discover the proper * sizes. */ -#define CFG_FLASH_BASE 0xFC000000 /* start of FLASH 64M */ -#define CFG_BR0_PRELIM 0xFC001801 /* port size 32bit */ -#define CFG_OR0_PRELIM 0xFC000FF7 /* 64 MB Flash */ +#ifdef CONFIG_STXSSA_4M +#define CFG_FLASH_BASE 0xFFC00000 /* start of 4 MiB flash */ +#else +#define CFG_FLASH_BASE 0xFC000000 /* start of 64 MiB flash */ +#endif +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x1801) /* port size 32bit */ +#define CFG_OR0_PRELIM (CFG_FLASH_BASE | 0x0FF7) #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1 @@ -104,9 +108,9 @@ /* The configuration latch is Chip Select 1. * It's an 8-bit latch in the lower 8 bits of the word. */ -#define CFG_LBC_CFGLATCH_BASE 0xfb000000 /* Base of config latch */ -#define CFG_BR1_PRELIM 0xfb001801 /* 32-bit port */ -#define CFG_OR1_PRELIM 0xffff0ff7 /* 64K is enough */ +#define CFG_LBC_CFGLATCH_BASE 0xFB000000 /* Base of config latch */ +#define CFG_BR1_PRELIM 0xFB001801 /* 32-bit port */ +#define CFG_OR1_PRELIM 0xFFFF0FF7 /* 64K is enough */ #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ @@ -300,17 +304,20 @@ /* Environment - default config is in flash, see below */ #if 0 /* in EEPROM */ -#define CFG_ENV_IS_IN_EEPROM 1 -#define CFG_ENV_OFFSET 0 -#define CFG_ENV_SIZE 2048 +# define CFG_ENV_IS_IN_EEPROM 1 +# define CFG_ENV_OFFSET 0 +# define CFG_ENV_SIZE 2048 #else /* in flash */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SECT_SIZE 0x40000 - -#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE 0x4000 -#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +# define CFG_ENV_IS_IN_FLASH 1 +# ifdef CONFIG_STXSSA_4M +# define CFG_ENV_SECT_SIZE 0x20000 +# else /* default configuration - 64 MiB flash */ +# define CFG_ENV_SECT_SIZE 0x40000 +# endif +# define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE) +# define CFG_ENV_SIZE 0x4000 +# define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE) +# define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ diff --git a/nand_spl/board/amcc/bamboo/Makefile b/nand_spl/board/amcc/bamboo/Makefile new file mode 100644 index 0000000..0df86f9 --- /dev/null +++ b/nand_spl/board/amcc/bamboo/Makefile @@ -0,0 +1,100 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk +include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk + +LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds +LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +AFLAGS += -DCONFIG_NAND_SPL +CFLAGS += -DCONFIG_NAND_SPL + +SOBJS = start.o init.o resetvec.o +COBJS = nand_boot.o nand_ecc.o ndfc.o sdram.o + +SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +__OBJS := $(SOBJS) $(COBJS) +LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR) + +nandobj := $(OBJTREE)/nand_spl/ + +ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin + +all: $(obj).depend $(ALL) + +$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ + +$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + +$(nandobj)u-boot-spl: $(OBJS) + cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ + -Map $(nandobj)u-boot-spl.map \ + -o $(nandobj)u-boot-spl + +# create symbolic links for common files + +# from cpu directory +$(obj)ndfc.c: + @rm -f $(obj)ndfc.c + ln -s $(SRCTREE)/cpu/ppc4xx/ndfc.c $(obj)ndfc.c + +$(obj)resetvec.S: + @rm -f $(obj)resetvec.S + ln -s $(SRCTREE)/cpu/ppc4xx/resetvec.S $(obj)resetvec.S + +$(obj)start.S: + @rm -f $(obj)start.S + ln -s $(SRCTREE)/cpu/ppc4xx/start.S $(obj)start.S + +# from board directory +$(obj)init.S: + @rm -f $(obj)init.S + ln -s $(SRCTREE)/board/amcc/bamboo/init.S $(obj)init.S + +# from nand_spl directory +$(obj)nand_boot.c: + @rm -f $(obj)nand_boot.c + ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c + +# from drivers/nand directory +$(obj)nand_ecc.c: + @rm -f $(obj)nand_ecc.c + ln -s $(SRCTREE)/drivers/nand/nand_ecc.c $(obj)nand_ecc.c + +######################################################################### + +$(obj)%.o: $(obj)%.S + $(CC) $(AFLAGS) -c -o $@ $< + +$(obj)%.o: $(obj)%.c + $(CC) $(CFLAGS) -c -o $@ $< + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/nand_spl/board/amcc/bamboo/config.mk b/nand_spl/board/amcc/bamboo/config.mk new file mode 100644 index 0000000..f7ec751 --- /dev/null +++ b/nand_spl/board/amcc/bamboo/config.mk @@ -0,0 +1,49 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# AMCC 440EP Reference Platform (Bamboo) board +# + +# +# TEXT_BASE for SPL: +# +# On 440EP(x) platforms the SPL is located at 0xfffff000...0xffffffff, +# in the last 4kBytes of memory space in cache. +# We will copy this SPL into instruction-cache in start.S. So we set +# TEXT_BASE to starting address in i-cache here. +# +TEXT_BASE = 0x00800000 + +# PAD_TO used to generate a 16kByte binary needed for the combined image +# -> PAD_TO = TEXT_BASE + 0x4000 +PAD_TO = 0x00804000 + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/nand_spl/board/amcc/bamboo/sdram.c b/nand_spl/board/amcc/bamboo/sdram.c new file mode 100644 index 0000000..4f09072 --- /dev/null +++ b/nand_spl/board/amcc/bamboo/sdram.c @@ -0,0 +1,92 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ppc4xx.h> +#include <asm/processor.h> +#include <asm/io.h> + +static void wait_init_complete(void) +{ + u32 val; + + do { + mfsdram(mem_mcsts, val); + } while (!(val & 0x80000000)); +} + +/* + * early_sdram_init() + * + * As the name already indicates, this function is called very early + * from start.S and configures the SDRAM with fixed values. This is needed, + * since the 440EP has no internal SRAM and the 4kB NAND_SPL loader has + * not enough free space to implement the complete I2C SPD DDR autodetection + * routines. Therefore the Bamboo only supports the onboard 64MBytes of SDRAM + * when booting from NAND flash. + */ +void early_sdram_init(void) +{ + /* + * Soft-reset SDRAM controller. + */ + mtsdr(sdr_srst, SDR0_SRST_DMC); + mtsdr(sdr_srst, 0x00000000); + + /* + * Disable memory controller. + */ + mtsdram(mem_cfg0, 0x00000000); + + /* + * Setup some default + */ + mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */ + mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ + mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */ + mtsdram(mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */ + mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ + + /* + * Following for CAS Latency = 2.5 @ 133 MHz PLB + */ + mtsdram(mem_b0cr, 0x00082001); + mtsdram(mem_tr0, 0x41094012); + mtsdram(mem_tr1, 0x8080083d); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/ + mtsdram(mem_rtr, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */ + mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM*/ + + /* + * Enable the controller, then wait for DCEN to complete + */ + mtsdram(mem_cfg0, 0x80000000); /* DCEN=1, PMUD=0*/ + wait_init_complete(); +} + +long int initdram(int board_type) +{ + /* + * Nothing to do here, just return size of fixed SDRAM setup + */ + return CFG_MBYTES_SDRAM << 20; +} diff --git a/nand_spl/board/amcc/bamboo/u-boot.lds b/nand_spl/board/amcc/bamboo/u-boot.lds new file mode 100644 index 0000000..28228f8 --- /dev/null +++ b/nand_spl/board/amcc/bamboo/u-boot.lds @@ -0,0 +1,65 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc:common) +SECTIONS +{ + .resetvec 0x00800FFC : + { + *(.resetvec) + } = 0xffff + + .text : + { + start.o (.text) + init.o (.text) + nand_boot.o (.text) + sdram.o (.text) + ndfc.o (.text) + + *(.text) + *(.fixup) + } + _etext = .; + + .data : + { + *(.rodata*) + *(.data*) + *(.sdata*) + __got2_start = .; + *(.got2) + __got2_end = .; + } + + _edata = .; + + __bss_start = .; + .bss : + { + *(.sbss) + *(.bss) + } + + _end = . ; +} diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile index b42da8c..ec1be5a 100644 --- a/nand_spl/board/amcc/sequoia/Makefile +++ b/nand_spl/board/amcc/sequoia/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2006 +# (C) Copyright 2006-2007 # Stefan Roese, DENX Software Engineering, sr@denx.de. # # See file CREDITS for list of people who contributed to this @@ -30,7 +30,7 @@ AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL SOBJS = start.o init.o resetvec.o -COBJS = nand_boot.o ndfc.o sdram.o +COBJS = nand_boot.o nand_ecc.o ndfc.o sdram.o SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) @@ -85,6 +85,11 @@ $(obj)nand_boot.c: @rm -f $(obj)nand_boot.c ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c +# from drivers/nand directory +$(obj)nand_ecc.c: + @rm -f $(obj)nand_ecc.c + ln -s $(SRCTREE)/drivers/nand/nand_ecc.c $(obj)nand_ecc.c + ######################################################################### $(obj)%.o: $(obj)%.S diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index a136fb7..840a596 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or @@ -24,27 +24,28 @@ #define CFG_NAND_READ_DELAY \ { volatile int dummy; int i; for (i=0; i<10000; i++) dummy = i; } +static int nand_ecc_pos[] = CFG_NAND_ECCPOS; + extern void board_nand_init(struct nand_chip *nand); -extern void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd); -extern void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte); -extern u_char ndfc_read_byte(struct mtd_info *mtdinfo); -extern int ndfc_dev_ready(struct mtd_info *mtdinfo); -extern int jump_to_ram(ulong delta); -extern int jump_to_uboot(ulong addr); -static int nand_is_bad_block(struct mtd_info *mtd, int block) +static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd) { struct nand_chip *this = mtd->priv; - int page_addr = block * CFG_NAND_PAGE_COUNT; + int page_addr = page + block * CFG_NAND_PAGE_COUNT; + + if (this->dev_ready) + this->dev_ready(mtd); + else + CFG_NAND_READ_DELAY; /* Begin command latch cycle */ this->hwcontrol(mtd, NAND_CTL_SETCLE); - this->write_byte(mtd, NAND_CMD_READOOB); + this->write_byte(mtd, cmd); /* Set ALE and clear CLE to start address cycle */ this->hwcontrol(mtd, NAND_CTL_CLRCLE); this->hwcontrol(mtd, NAND_CTL_SETALE); /* Column address */ - this->write_byte(mtd, CFG_NAND_BAD_BLOCK_POS); /* A[7:0] */ + this->write_byte(mtd, offs); /* A[7:0] */ this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */ this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */ #ifdef CFG_NAND_4_ADDR_CYCLE @@ -62,6 +63,15 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block) else CFG_NAND_READ_DELAY; + return 0; +} + +static int nand_is_bad_block(struct mtd_info *mtd, int block) +{ + struct nand_chip *this = mtd->priv; + + nand_command(mtd, block, 0, CFG_NAND_BAD_BLOCK_POS, NAND_CMD_READOOB); + /* * Read on byte */ @@ -74,39 +84,46 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block) static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst) { struct nand_chip *this = mtd->priv; - int page_addr = page + block * CFG_NAND_PAGE_COUNT; + u_char *ecc_calc; + u_char *ecc_code; + u_char *oob_data; int i; + int eccsize = CFG_NAND_ECCSIZE; + int eccbytes = CFG_NAND_ECCBYTES; + int eccsteps = CFG_NAND_ECCSTEPS; + uint8_t *p = dst; + int stat; - /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); - this->write_byte(mtd, NAND_CMD_READ0); - /* Set ALE and clear CLE to start address cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); - this->hwcontrol(mtd, NAND_CTL_SETALE); - /* Column address */ - this->write_byte(mtd, 0); /* A[7:0] */ - this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */ - this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */ -#ifdef CFG_NAND_4_ADDR_CYCLE - /* One more address cycle for devices > 32MiB */ - this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f)); /* A[xx:25] */ -#endif - /* Latch in address */ - this->hwcontrol(mtd, NAND_CTL_CLRALE); + nand_command(mtd, block, page, 0, NAND_CMD_READ0); - /* - * Wait a while for the data to be ready + /* No malloc available for now, just use some temporary locations + * in SDRAM */ - if (this->dev_ready) - this->dev_ready(mtd); - else - CFG_NAND_READ_DELAY; + ecc_calc = (u_char *)(CFG_SDRAM_BASE + 0x10000); + ecc_code = ecc_calc + 0x100; + oob_data = ecc_calc + 0x200; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + this->enable_hwecc(mtd, NAND_ECC_READ); + this->read_buf(mtd, p, eccsize); + this->calculate_ecc(mtd, p, &ecc_calc[i]); + } + this->read_buf(mtd, oob_data, CFG_NAND_OOBSIZE); - /* - * Read page into buffer - */ - for (i=0; i<CFG_NAND_PAGE_SIZE; i++) - *dst++ = this->read_byte(mtd); + /* Pick the ECC bytes out of the oob data */ + for (i = 0; i < CFG_NAND_ECCTOTAL; i++) + ecc_code[i] = oob_data[nand_ecc_pos[i]]; + + eccsteps = CFG_NAND_ECCSTEPS; + p = dst; + + for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + /* No chance to do something with the possible error message + * from correct_data(). We just hope that all possible errors + * are corrected by this routine. + */ + stat = this->correct_data(mtd, p, &ecc_code[i], &ecc_calc[i]); + } return 0; } |