summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/keymile/common/common.c209
-rw-r--r--board/keymile/mgcoge/Makefile2
-rw-r--r--board/keymile/mgsuvd/Makefile2
-rw-r--r--include/configs/mgcoge.h1
-rw-r--r--include/configs/mgsuvd.h1
5 files changed, 213 insertions, 2 deletions
diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
new file mode 100644
index 0000000..0f57015
--- /dev/null
+++ b/board/keymile/common/common.c
@@ -0,0 +1,209 @@
+/*
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <ioports.h>
+#include <malloc.h>
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
+
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#include <i2c.h>
+#endif
+
+extern int i2c_soft_read_pin (void);
+
+#if defined(CFG_I2C_INIT_BOARD)
+#define DELAY_ABORT_SEQ 62
+#define DELAY_HALF_PERIOD (500 / (CFG_I2C_SPEED / 1000))
+
+#if defined(CONFIG_MGCOGE)
+#define SDA_MASK 0x00010000
+#define SCL_MASK 0x00020000
+static void set_pin (int state, unsigned long mask)
+{
+ volatile ioport_t *iop = ioport_addr ((immap_t *)CFG_IMMR, 3);
+
+ if (state)
+ iop->pdat |= (mask);
+ else
+ iop->pdat &= ~(mask);
+
+ iop->pdir |= (mask);
+}
+
+static int get_pin (unsigned long mask)
+{
+ volatile ioport_t *iop = ioport_addr ((immap_t *)CFG_IMMR, 3);
+
+ iop->pdir &= ~(mask);
+ return (0 != (iop->pdat & (mask)));
+}
+
+static void set_sda (int state)
+{
+ set_pin (state, SDA_MASK);
+}
+
+static void set_scl (int state)
+{
+ set_pin (state, SCL_MASK);
+}
+
+static int get_sda (void)
+{
+ return get_pin (SDA_MASK);
+}
+
+static int get_scl (void)
+{
+ return get_pin (SCL_MASK);
+}
+
+#if defined(CONFIG_HARD_I2C)
+static void setports (int gpio)
+{
+ volatile ioport_t *iop = ioport_addr ((immap_t *)CFG_IMMR, 3);
+
+ if (gpio) {
+ iop->ppar &= ~(SDA_MASK | SCL_MASK);
+ iop->podr &= ~(SDA_MASK | SCL_MASK);
+ } else {
+ iop->ppar |= (SDA_MASK | SCL_MASK);
+ iop->pdir &= ~(SDA_MASK | SCL_MASK);
+ iop->podr |= (SDA_MASK | SCL_MASK);
+ }
+}
+#endif
+#endif
+
+#if defined(CONFIG_MGSUVD)
+static void set_sda (int state)
+{
+ I2C_SDA(state);
+}
+
+static void set_scl (int state)
+{
+ I2C_SCL(state);
+}
+
+static int get_sda (void)
+{
+ return i2c_soft_read_pin ();
+}
+
+static int get_scl (void)
+{
+ int val;
+
+ *(unsigned short *)(I2C_BASE_DIR) &= ~SCL_CONF;
+ udelay (1);
+ val = *(unsigned char *)(I2C_BASE_PORT);
+
+ return ((val & SCL_BIT) == SCL_BIT);
+}
+
+#endif
+
+static void writeStartSeq (void)
+{
+ set_sda (1);
+ udelay (DELAY_HALF_PERIOD);
+ set_scl (1);
+ udelay (DELAY_HALF_PERIOD);
+ set_sda (0);
+ udelay (DELAY_HALF_PERIOD);
+ set_scl (0);
+ udelay (DELAY_HALF_PERIOD);
+}
+
+/* I2C is a synchronous protocol and resets of the processor in the middle
+ of an access can block the I2C Bus until a powerdown of the full unit is
+ done. This function toggles the SCL until the SCL and SCA line are
+ released, but max. 16 times, after this a I2C start-sequence is sent.
+ This I2C Deblocking mechanism was developed by Keymile in association
+ with Anatech and Atmel in 1998.
+ */
+static int i2c_make_abort (void)
+{
+ int scl_state = 0;
+ int sda_state = 0;
+ int i = 0;
+ int ret = 0;
+
+ if (!get_sda ()) {
+ ret = -1;
+ while (i < 16) {
+ i++;
+ set_scl (0);
+ udelay (DELAY_ABORT_SEQ);
+ set_scl (1);
+ udelay (DELAY_ABORT_SEQ);
+ scl_state = get_scl ();
+ sda_state = get_sda ();
+ if (scl_state && sda_state) {
+ ret = 0;
+ break;
+ }
+ }
+ }
+ if (ret == 0) {
+ for (i =0; i < 5; i++) {
+ writeStartSeq ();
+ }
+ }
+ get_sda ();
+ return ret;
+}
+
+/**
+ * i2c_init_board - reset i2c bus. When the board is powercycled during a
+ * bus transfer it might hang; for details see doc/I2C_Edge_Conditions.
+ */
+void i2c_init_board(void)
+{
+#if defined(CONFIG_HARD_I2C)
+ volatile immap_t *immap = (immap_t *)CFG_IMMR ;
+ volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
+
+ /* disable I2C controller first, otherwhise it thinks we want to */
+ /* talk to the slave port... */
+ i2c->i2c_i2mod &= ~0x01;
+
+ /* Set the PortPins to GPIO */
+ setports (1);
+#endif
+
+ /* Now run the AbortSequence() */
+ i2c_make_abort ();
+
+#if defined(CONFIG_HARD_I2C)
+ /* Set the PortPins back to use for I2C */
+ setports (0);
+#endif
+}
+#endif
diff --git a/board/keymile/mgcoge/Makefile b/board/keymile/mgcoge/Makefile
index e00295d..0cad821 100644
--- a/board/keymile/mgcoge/Makefile
+++ b/board/keymile/mgcoge/Makefile
@@ -28,7 +28,7 @@ endif
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o
+COBJS := $(BOARD).o ../common/common.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/keymile/mgsuvd/Makefile b/board/keymile/mgsuvd/Makefile
index efdd410..b2145f9 100644
--- a/board/keymile/mgsuvd/Makefile
+++ b/board/keymile/mgsuvd/Makefile
@@ -28,7 +28,7 @@ endif
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o
+COBJS = $(BOARD).o ../common/common.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index bfbbd45..398e092 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -202,6 +202,7 @@
#define CONFIG_I2C_MULTI_BUS 1
#define CONFIG_I2C_CMD_TREE 1
#define CFG_MAX_I2C_BUS 2
+#define CFG_I2C_INIT_BOARD 1
/* EEprom support */
#define CFG_I2C_EEPROM_ADDR_LEN 1
diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h
index c569c81..2048575 100644
--- a/include/configs/mgsuvd.h
+++ b/include/configs/mgsuvd.h
@@ -373,6 +373,7 @@
#define CONFIG_I2C_MULTI_BUS 1
#define CONFIG_I2C_CMD_TREE 1
#define CFG_MAX_I2C_BUS 2
+#define CFG_I2C_INIT_BOARD 1
/* EEprom support */
#define CFG_I2C_EEPROM_ADDR_LEN 1