diff options
| -rw-r--r-- | board/freescale/m54455evb/Makefile | 4 | ||||
| -rw-r--r-- | board/freescale/m54455evb/flash.c | 1287 | ||||
| -rw-r--r-- | board/freescale/m54455evb/m54455evb.c | 50 | ||||
| -rw-r--r-- | include/configs/M54455EVB.h | 45 |
4 files changed, 58 insertions, 1328 deletions
diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile index ca9a772..74c2528 100644 --- a/board/freescale/m54455evb/Makefile +++ b/board/freescale/m54455evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o mii.o +COBJS = $(BOARD).o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) @@ -41,4 +41,4 @@ include $(SRCTREE)/rules.mk sinclude $(obj).depend -#########################################################################
\ No newline at end of file +######################################################################### diff --git a/board/freescale/m54455evb/flash.c b/board/freescale/m54455evb/flash.c deleted file mode 100644 index 6b50e8d..0000000 --- a/board/freescale/m54455evb/flash.c +++ /dev/null @@ -1,1287 +0,0 @@ -/* - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -#include <asm/immap.h> - -#ifndef CFG_FLASH_CFI -typedef unsigned char FLASH_PORT_WIDTH; -typedef volatile unsigned char FLASH_PORT_WIDTHV; - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT -#define CFG_FLASH_NONCFI_WIDTH FLASH_CFI_8BIT - -/* Intel-compatible flash commands */ -#define INTEL_PROGRAM 0x00100010 -#define INTEL_ERASE 0x00200020 -#define INTEL_WRSETUP 0x00400040 -#define INTEL_CLEAR 0x00500050 -#define INTEL_LOCKBIT 0x00600060 -#define INTEL_PROTECT 0x00010001 -#define INTEL_STATUS 0x00700070 -#define INTEL_READID 0x00900090 -#define INTEL_CFIQRY 0x00980098 -#define INTEL_SUSERASE 0x00B000B0 -#define INTEL_PROTPROG 0x00C000C0 -#define INTEL_CONFIRM 0x00D000D0 -#define INTEL_WRBLK 0x00e800e8 -#define INTEL_RESET 0x00FF00FF - -/* Intel-compatible flash status bits */ -#define INTEL_FINISHED 0x00800080 -#define INTEL_OK 0x00800080 -#define INTEL_ERASESUS 0x00600060 -#define INTEL_WSM_SUS (INTEL_FINISHED | INTEL_ERASESUS) - -/* 28F160C3B CFI Data offset - This could vary */ -#define INTEL_CFI_MFG 0x00 /* Manufacturer ID */ -#define INTEL_CFI_PART 0x01 /* Product ID */ -#define INTEL_CFI_LOCK 0x02 /* */ -#define INTEL_CFI_TWPRG 0x1F /* Typical Single Word Program Timeout 2^n us */ -#define INTEL_CFI_MBUFW 0x20 /* Typical Max Buffer Write Timeout 2^n us */ -#define INTEL_CFI_TERB 0x21 /* Typical Block Erase Timeout 2^n ms */ -#define INTEL_CFI_MWPRG 0x23 /* Maximum Word program timeout 2^n us */ -#define INTEL_CFI_MERB 0x25 /* Maximum Block Erase Timeout 2^n s */ -#define INTEL_CFI_SIZE 0x27 /* Device size 2^n bytes */ -#define INTEL_CFI_CAP 0x28 -#define INTEL_CFI_WRBUF 0x2A -#define INTEL_CFI_BANK 0x2C /* Number of Bank */ -#define INTEL_CFI_BLK1A 0x2D /* Number of Blocks */ -#define INTEL_CFI_BLK1B 0x2E /* Number of Blocks */ -#define INTEL_CFI_SZ1A 0x2F /* Block Region Size */ -#define INTEL_CFI_SZ1B 0x30 -#define INTEL_CFI_BLK2A 0x31 -#define INTEL_CFI_BLK2B 0x32 -#define INTEL_CFI_SZ2A 0x33 -#define INTEL_CFI_SZ2B 0x34 - -#define FLASH_CYCLE1 0x0555 -#define FLASH_CYCLE2 0x0aaa - -#define WR_BLOCK 0x20 - -/* not in the flash.h yet */ -#define FLASH_28F64P30T 0x00B9 /* Intel 28F64P30T ( 64M) */ -#define FLASH_28F64P30B 0x00BA /* Intel 28F64P30B ( 64M) */ -#define FLASH_28F128P30T 0x00BB /* Intel 28F128P30T ( 128M = 8M x 16 ) */ -#define FLASH_28F128P30B 0x00BC /* Intel 28F128P30B ( 128M = 8M x 16 ) */ -#define FLASH_28F256P30T 0x00BD /* Intel 28F256P30T ( 256M = 16M x 16 ) */ -#define FLASH_28F256P30B 0x00BE /* Intel 28F256P30B ( 256M = 16M x 16 ) */ - -#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) -#define STM_ID_M25P16 0x20152015 -#define FLASH_M25P16 0x0055 -#endif - -#define SYNC __asm__("nop") - -/*----------------------------------------------------------------------- - * Functions - */ - -ulong flash_get_size(FPWV * addr, flash_info_t * info); -int flash_get_offsets(ulong base, flash_info_t * info); -int flash_cmd_rd(volatile u16 * addr, int index); -int write_data(flash_info_t * info, ulong dest, FPW data); -int write_data_block(flash_info_t * info, ulong src, ulong dest); -int write_word_atm(flash_info_t * info, volatile u8 * dest, u16 data); -void inline spin_wheel(void); -void flash_sync_real_protect(flash_info_t * info); -uchar intel_sector_protected(flash_info_t * info, ushort sector); - -#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) -int write_ser_data(flash_info_t * info, ulong dest, uchar * data, ulong cnt); -int serial_flash_read_status(int chipsel); -static int ser_flash_cs = 0; -#endif - -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; - -ulong flash_init(void) -{ - int i; - ulong size = 0; - ulong fbase = 0; - -#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) - dspi_init(); -#endif - - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { - memset(&flash_info[i], 0, sizeof(flash_info_t)); - - switch (i) { - case 0: - fbase = (ulong) CFG_FLASH0_BASE; - break; - case 1: - fbase = (ulong) CFG_FLASH1_BASE; - break; -#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) - case 2: - fbase = (ulong) CFG_FLASH2_BASE; - break; -#endif - } - - flash_get_size((FPWV *) fbase, &flash_info[i]); - flash_get_offsets((ulong) fbase, &flash_info[i]); - fbase += flash_info[i].size; - size += flash_info[i].size; - - /* get the h/w and s/w protection status in sync */ - flash_sync_real_protect(&flash_info[i]); - } - - /* Protect monitor and environment sectors */ - flash_protect(FLAG_PROTECT_SET, - CFG_MONITOR_BASE, - CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); - - return size; -} - -int flash_get_offsets(ulong base, flash_info_t * info) -{ - int i, j, k; - int sectors, bs, banks; - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_ATM) { - int sect[] = CFG_ATMEL_SECT; - int sectsz[] = CFG_ATMEL_SECTSZ; - - info->start[0] = base; - for (k = 0, i = 0; i < CFG_ATMEL_REGION; i++) { - for (j = 0; j < sect[i]; j++, k++) { - info->start[k + 1] = info->start[k] + sectsz[i]; - info->protect[k] = 0; - } - } - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - volatile u16 *addr16 = (volatile u16 *)base; - - *addr16 = (FPW) INTEL_RESET; /* restore read mode */ - *addr16 = (FPW) INTEL_READID; - - banks = addr16[INTEL_CFI_BANK] & 0xff; - - sectors = 0; - info->start[0] = base; - - for (k = 0, i = 0; i < banks; i++) { - /* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec. - * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count - * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count - */ - bs = ((((addr16[INTEL_CFI_SZ1B + (i * 4)] & 0xff) << 8) - | (addr16[INTEL_CFI_SZ1A + (i * 4)] & 0xff)) * - 0x100); - sectors = - (addr16[INTEL_CFI_BLK1A + (i * 4)] & 0xff) + 1; - - for (j = 0; j < sectors; j++, k++) { - info->start[k + 1] = info->start[k] + bs; - } - } - - *addr16 = (FPW) INTEL_RESET; /* restore read mode */ - } -#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_STM) { - info->start[0] = CFG_FLASH2_BASE; - for (k = 0, i = 0; i < CFG_STM_SECT; i++, k++) { - info->start[k + 1] = info->start[k] + CFG_STM_SECTSZ; - info->protect[k] = 0; - } - } -#endif - - return ERR_OK; -} - -void flash_print_info(flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf("INTEL "); - break; - case FLASH_MAN_ATM: - printf("ATMEL "); - break; -#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) - case FLASH_MAN_STM: - printf("ST "); - break; -#endif - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AT040: - printf("AT49BV040A\n"); - break; - case FLASH_28F128J3A: - printf("28F128J3A\n"); - break; -#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) - case FLASH_M25P16: - printf("M25P16\n"); - break; -#endif - default: - printf("Unknown Chip Type\n"); - return; - } - - if (info->size > 0x100000) { - int remainder; - - printf(" Size: %ld", info->size >> 20); - - remainder = (info->size % 0x100000); - if (remainder) { - remainder >>= 10; - remainder = (int)((float) - (((float)remainder / (float)1024) * - 10000)); - printf(".%d ", remainder); - } - - printf("MB in %d Sectors\n", info->sector_count); - } else - printf(" Size: %ld KB in %d Sectors\n", - info->size >> 10, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s", - info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf("\n"); -} - -/* - * The following code cannot be run from FLASH! - */ -ulong flash_get_size(FPWV * addr, flash_info_t * info) -{ - volatile u16 *addr16 = (volatile u16 *)addr; - int intel = 0, banks = 0; - u16 value; - int i; - -#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) - if ((ulong) addr == CFG_FLASH2_BASE) { - int manufactId = 0; - int deviceId = 0; - - ser_flash_cs = 1; - - dspi_tx(ser_flash_cs, 0x80, SER_RDID); - dspi_tx(ser_flash_cs, 0x80, 0); - dspi_tx(ser_flash_cs, 0x80, 0); - dspi_tx(ser_flash_cs, 0x80, 0); - - dspi_rx(); - manufactId = dspi_rx(); - deviceId = dspi_rx() << 8; - deviceId |= dspi_rx(); - - dspi_tx(ser_flash_cs, 0x00, 0); - dspi_rx(); - - switch (manufactId) { - case (u8) STM_MANUFACT: - info->flash_id = FLASH_MAN_STM; - break; - } - - switch (deviceId) { - case (u16) STM_ID_M25P16: - info->flash_id += FLASH_M25P16; - break; - } - - info->sector_count = CFG_STM_SECT; - info->size = CFG_STM_SECT * CFG_STM_SECTSZ; - - return (info->size); - } -#endif - - addr[FLASH_CYCLE1] = (FPWV) 0x00AA00AA; /* for Atmel, Intel ignores this */ - addr[FLASH_CYCLE2] = (FPWV) 0x00550055; /* for Atmel, Intel ignores this */ - addr[FLASH_CYCLE1] = (FPWV) 0x00900090; /* selects Intel or Atmel */ - - switch (addr[0] & 0xff) { - case (u8) ATM_MANUFACT: - info->flash_id = FLASH_MAN_ATM; - value = addr[1]; - break; - case (u8) INTEL_MANUFACT: - /* Terminate Atmel ID read */ - addr[0] = (FPWV) 0x00F000F0; - /* Write auto select command: read Manufacturer ID */ - /* Write auto select command sequence and test FLASH answer */ - *addr16 = (FPW) INTEL_RESET; /* restore read mode */ - *addr16 = (FPW) INTEL_READID; - - info->flash_id = FLASH_MAN_INTEL; - value = (addr16[INTEL_CFI_MFG] << 8); - value |= addr16[INTEL_CFI_PART] & 0xff; - intel = 1; - break; - default: - printf("Unknown Flash\n"); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - - *addr = (FPW) 0x00F000F0; - *addr = (FPW) INTEL_RESET; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - switch (value) { - case (u8) ATM_ID_LV040: - info->flash_id += FLASH_AT040; - break; - case (u16) INTEL_ID_28F128J3: - info->flash_id += FLASH_28F128J3A; - break; - case (u16) INTEL_ID_28F64P30T: - info->flash_id += FLASH_28F64P30T; - break; - case (u16) INTEL_ID_28F64P30B: - info->flash_id += FLASH_28F64P30B; - break; - case (u16) INTEL_ID_28F128P30T: - info->flash_id += FLASH_28F128P30T; - break; - case (u16) INTEL_ID_28F128P30B: - info->flash_id += FLASH_28F128P30B; - break; - case (u16) INTEL_ID_28F256P30T: - info->flash_id += FLASH_28F256P30T; - break; - case (u16) INTEL_ID_28F256P30B: - info->flash_id += FLASH_28F256P30B; - break; - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (intel) { - /* Intel spec. under CFI section */ - u32 sz; - int sectors, bs; - - banks = addr16[INTEL_CFI_BANK] & 0xff; - - sectors = sz = 0; - for (i = 0; i < banks; i++) { - /* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec. - * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count - * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count - */ - bs = ((((addr16[INTEL_CFI_SZ1B + (i * 4)] & 0xff) << 8) - | (addr16[INTEL_CFI_SZ1A + (i * 4)] & 0xff)) * - 0x100); - sectors += - (addr16[INTEL_CFI_BLK1A + (i * 4)] & 0xff) + 1; - sz += (bs * sectors); - } - - info->sector_count = sectors; - info->size = sz; - *addr = (FPW) INTEL_RESET; /* restore read mode */ - } else { - int sect[] = CFG_ATMEL_SECT; - int sectsz[] = CFG_ATMEL_SECTSZ; - - info->sector_count = 0; - info->size = 0; - for (i = 0; i < CFG_ATMEL_REGION; i++) { - info->sector_count += sect[i]; - info->size += sect[i] * sectsz[i]; - } - - /* reset ID mode */ - addr[0] = (FPWV) 0x00F000F0; - } - - if (info->sector_count > CFG_MAX_FLASH_SECT) { - printf("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CFG_MAX_FLASH_SECT); - info->sector_count = CFG_MAX_FLASH_SECT; - } - - return (info->size); -} - -int flash_cmd_rd(volatile u16 * addr, int index) -{ - return (int)addr[index]; -} - -#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) -int serial_flash_read_status(int chipsel) -{ - u16 status; - - dspi_tx(chipsel, 0x80, SER_RDSR); - dspi_rx(); - - dspi_tx(chipsel, 0x00, 0); - status = dspi_rx(); - - return status; -} -#endif - -/* - * This function gets the u-boot flash sector protection status - * (flash_info_t.protect[]) in sync with the sector protection - * status stored in hardware. - */ -void flash_sync_real_protect(flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F160C3B: - case FLASH_28F160C3T: - case FLASH_28F320C3B: - case FLASH_28F320C3T: - case FLASH_28F640C3B: - case FLASH_28F640C3T: - for (i = 0; i < info->sector_count; ++i) { - info->protect[i] = intel_sector_protected(info, i); - } - break; - default: - /* no h/w protect support */ - break; - } -} - -/* - * checks if "sector" in bank "info" is protected. Should work on intel - * strata flash chips 28FxxxJ3x in 8-bit mode. - * Returns 1 if sector is protected (or timed-out while trying to read - * protection status), 0 if it is not. - */ -uchar intel_sector_protected(flash_info_t * info, ushort sector) -{ - FPWV *addr; - FPWV *lock_conf_addr; - ulong start; - unsigned char ret; - - /* - * first, wait for the WSM to be finished. The rationale for - * waiting for the WSM to become idle for at most - * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy - * because of: (1) erase, (2) program or (3) lock bit - * configuration. So we just wait for the longest timeout of - * the (1)-(3), i.e. the erase timeout. - */ - - /* wait at least 35ns (W12) before issuing Read Status Register */ - /*udelay(1); */ - addr = (FPWV *) info->start[sector]; - *addr = (FPW) INTEL_STATUS; - - start = get_timer(0); - while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { - if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) { - *addr = (FPW) INTEL_RESET; /* restore read mode */ - printf("WSM busy too long, can't get prot status\n"); - return 1; - } - } - - /* issue the Read Identifier Codes command */ - *addr = (FPW) INTEL_READID; - - /* Intel example code uses offset of 4 for 8-bit flash */ - lock_conf_addr = (FPWV *) info->start[sector]; - ret = (lock_conf_addr[INTEL_CFI_LOCK] & (FPW) INTEL_PROTECT) ? 1 : 0; - - /* put flash back in read mode */ - *addr = (FPW) INTEL_RESET; - - return ret; -} - -int flash_erase(flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong type, start, last; - int rcode = 0, flashtype = 0; -#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) - int count; - u16 status; -#endif - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) - printf("- missing\n"); - else - printf("- no sectors to erase\n"); - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - - switch (type) { - case FLASH_MAN_ATM: - flashtype = 1; - break; - case FLASH_MAN_INTEL: - flashtype = 2; - break; -#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) - case FLASH_MAN_STM: - flashtype = 3; - break; -#endif - default: - type = (info->flash_id & FLASH_VENDMASK); - printf("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) - printf("- Warning: %d protected sectors will not be erased!\n", - prot); - else - printf("\n"); - - start = get_timer(0); - last = start; - -#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) - /* Perform bulk erase */ - if (flashtype == 3) { - if ((s_last - s_first) == (CFG_STM_SECT - 1)) { - if (prot == 0) { - dspi_tx(ser_flash_cs, 0x00, SER_WREN); - dspi_rx(); - - status = serial_flash_read_status(ser_flash_cs); - if (((status & 0x9C) != 0) - && ((status & 0x02) != 0x02)) { - printf("Can't erase flash\n"); - return 1; - } - - dspi_tx(ser_flash_cs, 0x00, SER_BULK_ERASE); - dspi_rx(); - - count = 0; - start = get_timer(0); - do { - status = - serial_flash_read_status - (ser_flash_cs); - - if (count++ > 0x10000) { - spin_wheel(); - count = 0; - } - - if (get_timer(start) > - CFG_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return 1; - } - } while (status & 0x01); - - printf("\b. done\n"); - return 0; - } else if (prot == CFG_STM_SECT) { - return 1; - } - } - } -#endif - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - - FPWV *addr = (FPWV *) (info->start[sect]); - int min = 0; - - printf("."); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - switch (flashtype) { - case 1: - { - FPWV *base; /* first address in bank */ - FPWV *atmeladdr; - - flag = disable_interrupts(); - - atmeladdr = (FPWV *) addr; /* concatenate to 8 bit */ - base = (FPWV *) (CFG_ATMEL_BASE); /* First sector */ - - base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (u8) 0x00800080; /* erase mode */ - base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ - *atmeladdr = (u8) 0x00300030; /* erase sector */ - - if (flag) - enable_interrupts(); - - while ((*atmeladdr & (u8) 0x00800080) != - (u8) 0x00800080) { - if (get_timer(start) > - CFG_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */ - - rcode = 1; - break; - } - } - - *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */ - break; - } - - case 2: - { - *addr = (FPW) INTEL_READID; - min = addr[INTEL_CFI_TERB] & 0xff; - min = 1 << min; /* ms */ - min = (min / info->sector_count) * 1000; - - /* start erase block */ - *addr = (FPW) INTEL_CLEAR; /* clear status register */ - *addr = (FPW) INTEL_ERASE; /* erase setup */ - *addr = (FPW) INTEL_CONFIRM; /* erase confirm */ - - while ((*addr & (FPW) INTEL_FINISHED) != - (FPW) INTEL_FINISHED) { - - if (get_timer(start) > - CFG_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - *addr = (FPW) INTEL_SUSERASE; /* suspend erase */ - *addr = (FPW) INTEL_RESET; /* reset to read mode */ - - rcode = 1; - break; - } - } - - *addr = (FPW) INTEL_RESET; /* resest to read mode */ - break; - } - -#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) - case 3: - { - u8 sec = ((ulong) addr >> 16) & 0xFF; - - dspi_tx(ser_flash_cs, 0x00, SER_WREN); - dspi_rx(); - status = - serial_flash_read_status - (ser_flash_cs); - if (((status & 0x9C) != 0) - && ((status & 0x02) != 0x02)) { - printf("Error Programming\n"); - return 1; - } - - dspi_tx(ser_flash_cs, 0x80, - SER_SECT_ERASE); - dspi_tx(ser_flash_cs, 0x80, sec); - dspi_tx(ser_flash_cs, 0x80, 0); - dspi_tx(ser_flash_cs, 0x00, 0); - - dspi_rx(); - dspi_rx(); - dspi_rx(); - dspi_rx(); - - do { - status = - serial_flash_read_status - (ser_flash_cs); - - if (get_timer(start) > - CFG_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return 1; - } - } while (status & 0x01); - - break; - } -#endif - } /* switch (flashtype) */ - } - } - printf(" done\n"); - - return rcode; -} - -int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - int count; - - if (info->flash_id == FLASH_UNKNOWN) - return 4; - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_ATM: - { - u16 data = 0; - int bytes; /* number of bytes to program in current word */ - int left; /* number of bytes left to program */ - int i, res; - - for (left = cnt, res = 0; - left > 0 && res == 0; - addr += sizeof(data), left -= - sizeof(data) - bytes) { - - bytes = addr & (sizeof(data) - 1); - addr &= ~(sizeof(data) - 1); - - /* combine source and destination data so can program - * an entire word of 16 or 32 bits - */ - for (i = 0; i < sizeof(data); i++) { - data <<= 8; - if (i < bytes || i - bytes >= left) - data += *((uchar *) addr + i); - else - data += *src++; - } - - data = (data >> 8) | (data << 8); - res = write_word_atm(info, (FPWV *) addr, data); - } - return res; - } /* case FLASH_MAN_ATM */ - - case FLASH_MAN_INTEL: - { - ulong cp, wp; - u16 data; - int i, l, rc, port_width; - - /* get lower word aligned address */ - wp = addr; - port_width = sizeof(FPW); - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - - for (; cnt == 0 && i < port_width; ++i, ++cp) - data = (data << 8) | (*(uchar *) cp); - - if ((rc = write_data(info, wp, data)) != 0) - return (rc); - - wp += port_width; - } - - if (cnt > WR_BLOCK) { - /* - * handle word aligned part - */ - count = 0; - while (cnt >= WR_BLOCK) { - - if ((rc = - write_data_block(info, - (ulong) src, - wp)) != 0) - return (rc); - - wp += WR_BLOCK; - src += WR_BLOCK; - cnt -= WR_BLOCK; - - if (count++ > 0x800) { - spin_wheel(); - count = 0; - } - } - } - - /* handle word aligned part */ - if (cnt < WR_BLOCK) { - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) - data = (data << 8) | *src++; - - if ((rc = - write_data(info, - (ulong) ((FPWV *) wp), - (FPW) (data))) != 0) - return (rc); - - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel(); - count = 0; - } - } - } - - if (cnt == 0) - return ERR_OK; - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; - ++i, ++cp) { - data = (data << 8) | (*src++); - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return write_data(info, (ulong) ((FPWV *) wp), - (FPW) data); - - } /* case FLASH_MAN_INTEL */ - -#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) - case FLASH_MAN_STM: - { - ulong wp; - u8 *data = (u8 *) src; - int left; /* number of bytes left to program */ - - wp = addr; - - /* page align, each page is 256 bytes */ - if ((wp % 0x100) != 0) { - left = (0x100 - (wp & 0xFF)); - write_ser_data(info, wp, data, left); - cnt -= left; - wp += left; - data += left; - } - - /* page program - 256 bytes at a time */ - if (cnt > 255) { - count = 0; - while (cnt >= 0x100) { - write_ser_data(info, wp, data, 0x100); - cnt -= 0x100; - wp += 0x100; - data += 0x100; - - if (count++ > 0x400) { - spin_wheel(); - count = 0; - } - } - } - - /* remainint bytes */ - if (cnt && (cnt < 256)) { - write_ser_data(info, wp, data, cnt); - wp += cnt; - data += cnt; - cnt -= cnt; - } - - printf("\b."); - } -#endif - } /* switch */ - - return ERR_OK; -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_data_block(flash_info_t * info, ulong src, ulong dest) -{ - FPWV *srcaddr = (FPWV *) src; - FPWV *dstaddr = (FPWV *) dest; - ulong start; - int flag, i; - - /* Check if Flash is (sufficiently) erased */ - for (i = 0; i < WR_BLOCK; i++) - if ((*dstaddr++ & 0xff) != 0xff) { - printf("not erased at %08lx (%lx)\n", - (ulong) dstaddr, *dstaddr); - return (2); - } - - dstaddr = (FPWV *) dest; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - *dstaddr = (FPW) INTEL_WRBLK; /* write block setup */ - - if (flag) - enable_interrupts(); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while ((*dstaddr & (FPW) INTEL_FINISHED) != (FPW) INTEL_OK) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - *dstaddr = (FPW) INTEL_RESET; /* restore read mode */ - return (1); - } - } - - *dstaddr = (FPW) WR_BLOCK - 1; /* write 32 to buffer */ - for (i = 0; i < WR_BLOCK; i++) - *dstaddr++ = *srcaddr++; - - dstaddr -= 1; - *dstaddr = (FPW) INTEL_CONFIRM; /* write 32 to buffer */ - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while ((*dstaddr & (FPW) INTEL_FINISHED) != (FPW) INTEL_OK) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - *dstaddr = (FPW) INTEL_RESET; /* restore read mode */ - return (1); - } - } - - *dstaddr = (FPW) INTEL_RESET; /* restore read mode */ - - return (0); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_data(flash_info_t * info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf("not erased at %08lx (%lx)\n", (ulong) addr, - (ulong) * addr); - return (2); - } - - /* Disable interrupts which might cause a timeout here */ - flag = (int)disable_interrupts(); - - *addr = (FPW) INTEL_CLEAR; - *addr = (FPW) INTEL_RESET; - - *addr = (FPW) INTEL_WRSETUP; /* write setup */ - *addr = data; - - if (flag) - enable_interrupts(); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while ((*addr & (FPW) INTEL_OK) != (FPW) INTEL_OK) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - *addr = (FPW) INTEL_SUSERASE; /* suspend mode */ - *addr = (FPW) INTEL_CLEAR; /* clear status */ - *addr = (FPW) INTEL_RESET; /* reset */ - return (1); - } - } - - *addr = (FPW) INTEL_CLEAR; /* clear status */ - *addr = (FPW) INTEL_RESET; /* restore read mode */ - - return (0); -} - -#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI) -int write_ser_data(flash_info_t * info, ulong dest, uchar * data, ulong cnt) -{ - ulong start; - int status, i; - u8 flashdata; - - /* Check if Flash is (sufficiently) erased */ - dspi_tx(ser_flash_cs, 0x80, SER_READ); - dspi_tx(ser_flash_cs, 0x80, (dest >> 16) & 0xFF); - dspi_tx(ser_flash_cs, 0x80, (dest >> 8) & 0xFF); - dspi_tx(ser_flash_cs, 0x80, dest & 0xFF); - dspi_rx(); - dspi_rx(); - dspi_rx(); - dspi_rx(); - dspi_tx(ser_flash_cs, 0x80, 0); - flashdata = dspi_rx(); - dspi_tx(ser_flash_cs, 0x00, 0); - dspi_rx(); - - if ((flashdata & *data) != *data) { - printf("not erased at %08lx (%lx)\n", (ulong) dest, - (ulong) flashdata); - return (2); - } - - dspi_tx(ser_flash_cs, 0x00, SER_WREN); - dspi_rx(); - - status = serial_flash_read_status(ser_flash_cs); - if (((status & 0x9C) != 0) && ((status & 0x02) != 0x02)) { - printf("Error Programming\n"); - return 1; - } - - start = get_timer(0); - - dspi_tx(ser_flash_cs, 0x80, SER_PAGE_PROG); - dspi_tx(ser_flash_cs, 0x80, ((dest & 0xFF0000) >> 16)); - dspi_tx(ser_flash_cs, 0x80, ((dest & 0xFF00) >> 8)); - dspi_tx(ser_flash_cs, 0x80, (dest & 0xFF)); - dspi_rx(); - dspi_rx(); - dspi_rx(); - dspi_rx(); - - for (i = 0; i < (cnt - 1); i++) { - dspi_tx(ser_flash_cs, 0x80, *data); - dspi_rx(); - data++; - } - - dspi_tx(ser_flash_cs, 0x00, *data); - dspi_rx(); - - do { - status = serial_flash_read_status(ser_flash_cs); - - if (get_timer(start) > CFG_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return 1; - } - } while (status & 0x01); - - return (0); -} -#endif - -/*----------------------------------------------------------------------- - * Write a word to Flash for ATMEL FLASH - * A word is 16 bits, whichever the bus width of the flash bank - * (not an individual chip) is. - * - * returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_word_atm(flash_info_t * info, volatile u8 * dest, u16 data) -{ - ulong start; - int flag, i; - int res = 0; /* result, assume success */ - FPWV *base; /* first address in flash bank */ - - /* Check if Flash is (sufficiently) erased */ - if ((*((volatile u16 *)dest) & data) != data) { - return (2); - } - - base = (FPWV *) (CFG_ATMEL_BASE); - - for (i = 0; i < sizeof(u16); i++) { - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (u8) 0x00A000A0; /* selects program mode */ - - *dest = data; /* start programming the data */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer(0); - - /* data polling for D7 */ - while (res == 0 - && (*dest & (u8) 0x00800080) != - (data & (u8) 0x00800080)) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - *dest = (u8) 0x00F000F0; /* reset bank */ - res = 1; - } - } - - *dest++ = (u8) 0x00F000F0; /* reset bank */ - data >>= 8; - } - - return (res); -} - -void inline spin_wheel(void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} - -#ifdef CFG_FLASH_PROTECTION -/*----------------------------------------------------------------------- - */ -int flash_real_protect(flash_info_t * info, long sector, int prot) -{ - int rcode = 0; /* assume success */ - FPWV *addr; /* address of sector */ - FPW value; - - addr = (FPWV *) (info->start[sector]); - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F160C3B: - case FLASH_28F160C3T: - case FLASH_28F320C3B: - case FLASH_28F320C3T: - case FLASH_28F640C3B: - case FLASH_28F640C3T: - *addr = (FPW) INTEL_RESET; /* make sure in read mode */ - *addr = (FPW) INTEL_LOCKBIT; /* lock command setup */ - - if (prot) - *addr = (FPW) INTEL_PROTECT; /* lock sector */ - else - *addr = (FPW) INTEL_CONFIRM; /* unlock sector */ - - /* now see if it really is locked/unlocked as requested */ - *addr = (FPW) INTEL_READID; - - /* read sector protection at sector address, (A7 .. A0) = 0x02. - * D0 = 1 for each device if protected. - * If at least one device is protected the sector is marked - * protected, but return failure. Mixed protected and - * unprotected devices within a sector should never happen. - */ - value = addr[2] & (FPW) INTEL_PROTECT; - if (value == 0) - info->protect[sector] = 0; - else if (value == (FPW) INTEL_PROTECT) - info->protect[sector] = 1; - else { - /* error, mixed protected and unprotected */ - rcode = 1; - info->protect[sector] = 1; - } - if (info->protect[sector] != prot) - rcode = 1; /* failed to protect/unprotect as requested */ - - /* reload all protection bits from hardware for now */ - flash_sync_real_protect(info); - break; - - default: - /* no hardware protect that we support */ - info->protect[sector] = prot; - break; - } - - return rcode; -} -#endif -#endif diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c index 0480b54..3c7b350 100644 --- a/board/freescale/m54455evb/m54455evb.c +++ b/board/freescale/m54455evb/m54455evb.c @@ -162,3 +162,53 @@ void pci_init_board(void) pci_mcf5445x_init(&hose); } #endif /* CONFIG_PCI */ + +#if defined(CFG_FLASH_CFI) +#include <flash.h> +ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) +{ + int sect[] = CFG_ATMEL_SECT; + int sectsz[] = CFG_ATMEL_SECTSZ; + int i, j, k; + + if (base != CFG_ATMEL_BASE) + return 0; + + info->flash_id = 0x01000000; + info->portwidth = 1; + info->chipwidth = 1; + info->buffer_size = 32; + info->erase_blk_tout = 16384; + info->write_tout = 2; + info->buffer_write_tout = 5; + info->vendor = 2; /* CFI_CMDSET_AMD_STANDARD */ + info->cmd_reset = 0x00F0; + info->interface = FLASH_CFI_X8; + info->legacy_unlock = 0; + info->manufacturer_id = (u16) ATM_MANUFACT; + info->device_id = ATM_ID_LV040; + info->device_id2 = 0; + + info->ext_addr = 0; + info->cfi_version = 0x3133; + info->cfi_offset = 0x0055; + info->addr_unlock1 = 0x00000555; + info->addr_unlock2 = 0x000002AA; + info->name = "CFI conformant"; + + + info->size = 0; + info->sector_count = CFG_ATMEL_TOTALSECT; + info->start[0] = base; + for (k = 0, i = 0; i < CFG_ATMEL_REGION; i++) { + info->size += sect[i] * sectsz[i]; + + for (j = 0; j < sect[i]; j++, k++) { + info->start[k + 1] = info->start[k] + sectsz[i]; + info->protect[k] = 0; + } + } + + return 1; +} +#endif /* CFG_FLASH_CFI */ diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 6620f03..6f93eea 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -297,9 +297,7 @@ # define CFG_ENV_SECT_SIZE 0x20000 #endif -/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system - keep reset. */ -#undef CFG_FLASH_CFI +#define CFG_FLASH_CFI #ifdef CFG_FLASH_CFI # define CONFIG_FLASH_CFI_DRIVER 1 @@ -310,50 +308,19 @@ # define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ # define CFG_FLASH_CHECKSUM # define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE } +# define CONFIG_FLASH_CFI_LEGACY -#else - -# define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */ - +#ifdef CONFIG_FLASH_CFI_LEGACY # define CFG_ATMEL_REGION 4 # define CFG_ATMEL_TOTALSECT 11 # define CFG_ATMEL_SECT {1, 2, 1, 7} # define CFG_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000} -# define CFG_INTEL_SECT 137 - -/* max number of sectors on one chip */ -# define CFG_MAX_FLASH_SECT (CFG_ATMEL_TOTALSECT + CFG_INTEL_SECT) -# define CFG_FLASH_ERASE_TOUT 2000 /* Atmel needs longer timeout */ -# define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -# define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -# define CFG_FLASH_UNLOCK_TOUT 100 /* Timeout for Flash Clear Lock Bits (in ms) */ -# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ -# define CFG_FLASH_CHECKSUM - -#ifdef CONFIG_SERIAL_FLASH -# define CFG_FLASH2_BASE 0x01000000 -# define CFG_STM_SECT 32 -# define CFG_STM_SECTSZ 0x10000 - -# undef CFG_FLASH_ERASE_TOUT -# define CFG_FLASH_ERASE_TOUT 20000 - -# define SER_WREN 0x06 -# define SER_WRDI 0x04 -# define SER_RDID 0x9F -# define SER_RDSR 0x05 -# define SER_WRSR 0x01 -# define SER_READ 0x03 -# define SER_F_READ 0x0B -# define SER_PAGE_PROG 0x02 -# define SER_SECT_ERASE 0xD8 -# define SER_BULK_ERASE 0xC7 -# define SER_DEEP_PWRDN 0xB9 -# define SER_RES 0xAB #endif - #endif +#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +#define CFG_FLASH_CHECKSUM + /* * This is setting for JFFS2 support in u-boot. * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. |