summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--board/dbau1x00/dbau1x00.c4
-rw-r--r--board/freescale/common/pixis.c5
-rw-r--r--board/gth2/gth2.c6
-rw-r--r--board/incaip/incaip.c5
-rw-r--r--board/lwmon5/lwmon5.c26
-rw-r--r--board/pb1x00/pb1x00.c4
-rw-r--r--board/purple/flash.c2
-rw-r--r--board/purple/purple.c3
-rw-r--r--board/rsdproto/rsdproto.c4
-rw-r--r--board/tb0229/tb0229.c7
-rw-r--r--common/cmd_ide.c16
-rw-r--r--common/cmd_mii.c8
-rw-r--r--common/miiphyutil.c282
-rw-r--r--common/spartan2.c2
-rw-r--r--common/spartan3.c2
-rw-r--r--cpu/mpc86xx/cpu.c4
-rw-r--r--cpu/mpc86xx/spd_sdram.c6
-rwxr-xr-xdrivers/Makefile2
-rw-r--r--drivers/uli526x.c996
-rw-r--r--include/asm-mips/io.h16
-rw-r--r--include/configs/MPC8544DS.h1
-rw-r--r--include/configs/MPC8641HPCN.h1
-rw-r--r--include/configs/lwmon5.h4
-rw-r--r--include/configs/rsdproto.h4
-rw-r--r--include/miiphy.h114
-rw-r--r--lib_mips/board.c5
-rw-r--r--net/eth.c4
27 files changed, 1312 insertions, 221 deletions
diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c
index d29e8d5..a13eeeb 100644
--- a/board/dbau1x00/dbau1x00.c
+++ b/board/dbau1x00/dbau1x00.c
@@ -25,6 +25,7 @@
#include <command.h>
#include <asm/au1x00.h>
#include <asm/mipsregs.h>
+#include <asm/io.h>
long int initdram(int board_type)
{
@@ -77,6 +78,9 @@ int checkboard (void)
default:
printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
}
+
+ set_io_port_base(0);
+
#ifdef CONFIG_IDE_PCMCIA
/* Enable 3.3 V on slot 0 ( VCC )
No 5V */
diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c
index fd99a93..45dcf4d 100644
--- a/board/freescale/common/pixis.c
+++ b/board/freescale/common/pixis.c
@@ -207,13 +207,16 @@ void read_from_px_regs_altbank(int set)
out8(PIXIS_BASE + PIXIS_VCFGEN1, tmp);
}
+#ifndef CFG_PIXIS_VBOOT_MASK
+#define CFG_PIXIS_VBOOT_MASK 0x40
+#endif
void set_altbank(void)
{
u8 tmp;
tmp = in8(PIXIS_BASE + PIXIS_VBOOT);
- tmp ^= 0x40;
+ tmp ^= CFG_PIXIS_VBOOT_MASK;
out8(PIXIS_BASE + PIXIS_VBOOT, tmp);
}
diff --git a/board/gth2/gth2.c b/board/gth2/gth2.c
index ffeaf58..1593f02 100644
--- a/board/gth2/gth2.c
+++ b/board/gth2/gth2.c
@@ -26,14 +26,13 @@
#include <asm/au1x00.h>
#include <asm/addrspace.h>
#include <asm/mipsregs.h>
+#include <asm/io.h>
#include <watchdog.h>
#include "ee_access.h"
static int wdi_status = 0;
-unsigned long mips_io_port_base = 0;
-
#define SDRAM_SIZE ((64*1024*1024)-(12*4096))
@@ -147,6 +146,9 @@ int checkboard (void)
default:
printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
}
+
+ set_io_port_base(0);
+
#ifdef CONFIG_IDE_PCMCIA
/* PCMCIA is on a 36 bit physical address.
We need to map it into a 32 bit addresses */
diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c
index b5d9e00..dbf0ecc 100644
--- a/board/incaip/incaip.c
+++ b/board/incaip/incaip.c
@@ -25,7 +25,7 @@
#include <command.h>
#include <asm/addrspace.h>
#include <asm/inca-ip.h>
-
+#include <asm/io.h>
extern uint incaip_get_cpuclk(void);
@@ -85,7 +85,6 @@ long int initdram(int board_type)
int checkboard (void)
{
-
unsigned long chipid = *INCA_IP_WDT_CHIPID;
int part_num;
@@ -107,5 +106,7 @@ int checkboard (void)
printf("CPU Speed %d MHz\n", incaip_get_cpuclk()/1000000);
+ set_io_port_base(0);
+
return 0;
}
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index 77f9989..9b24a7e 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -96,6 +96,23 @@ int board_early_init_f(void)
gpio_write_bit(CFG_GPIO_FLASH_WP, 1);
+ /*
+ * Reset PHY's:
+ * The PHY's need a 2nd reset pulse, since the MDIO address is latched
+ * upon reset, and with the first reset upon powerup, the addresses are
+ * not latched reliable, since the IRQ line is multiplexed with an
+ * MDIO address. A 2nd reset at this time will make sure, that the
+ * correct address is latched.
+ */
+ gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
+ gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+ udelay(1000);
+ gpio_write_bit(CFG_GPIO_PHY0_RST, 0);
+ gpio_write_bit(CFG_GPIO_PHY1_RST, 0);
+ udelay(1000);
+ gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
+ gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+
return 0;
}
@@ -231,15 +248,6 @@ int misc_init_r(void)
out_be32((void *)CFG_LIME_MMR, CFG_LIME_MMR_VALUE);
/*
- * Reset PHY's
- */
- gpio_write_bit(CFG_GPIO_PHY0_RST, 0);
- gpio_write_bit(CFG_GPIO_PHY1_RST, 0);
- udelay(100);
- gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
- gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
-
- /*
* Init display controller
*/
/* Setup dot clock (internal PLL, division rate 1/16) */
diff --git a/board/pb1x00/pb1x00.c b/board/pb1x00/pb1x00.c
index 40ac2a4..95b7d82 100644
--- a/board/pb1x00/pb1x00.c
+++ b/board/pb1x00/pb1x00.c
@@ -25,6 +25,7 @@
#include <command.h>
#include <asm/au1x00.h>
#include <asm/mipsregs.h>
+#include <asm/io.h>
long int initdram(int board_type)
{
@@ -69,6 +70,9 @@ int checkboard (void)
default:
printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
}
+
+ set_io_port_base(0);
+
#if defined(CONFIG_IDE_PCMCIA) && 0
/* Enable 3.3 V on slot 0 ( VCC )
No 5V */
diff --git a/board/purple/flash.c b/board/purple/flash.c
index 7522580..1baae35 100644
--- a/board/purple/flash.c
+++ b/board/purple/flash.c
@@ -299,7 +299,7 @@ void flash_print_info (flash_info_t *info)
int i;
uchar *boottype;
uchar *bootletter;
- uchar *fmt;
+ char *fmt;
uchar botbootletter[] = "B";
uchar topbootletter[] = "T";
uchar botboottype[] = "bottom boot sector";
diff --git a/board/purple/purple.c b/board/purple/purple.c
index 4c3e5b4..74718af 100644
--- a/board/purple/purple.c
+++ b/board/purple/purple.c
@@ -26,6 +26,7 @@
#include <asm/inca-ip.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
+#include <asm/io.h>
#include <asm/addrspace.h>
#include <asm/cacheops.h>
@@ -145,6 +146,8 @@ int checkboard (void)
printf("CPU Speed %d MHz\n", CPU_CLOCK_RATE/1000000);
+ set_io_port_base(0);
+
return 0;
}
diff --git a/board/rsdproto/rsdproto.c b/board/rsdproto/rsdproto.c
index bf4fd53..312d4b8 100644
--- a/board/rsdproto/rsdproto.c
+++ b/board/rsdproto/rsdproto.c
@@ -210,7 +210,7 @@ void read_RS5C372_time (struct tm *timedate)
#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
- if (i2c_read (RS5C372_PPC_I2C_ADR, 0, 1, buffer, sizeof (buffer))) {
+ if (! i2c_read (RS5C372_PPC_I2C_ADR, 0, 1, buffer, sizeof (buffer))) {
timedate->tm_sec = BCD_TO_BIN (buffer[0]);
timedate->tm_min = BCD_TO_BIN (buffer[1]);
timedate->tm_hour = BCD_TO_BIN (buffer[2]);
@@ -231,7 +231,7 @@ int read_LM84_temp (int address)
unsigned char buffer[8];
/*int rc;*/
- if (i2c_read (address, 0, 1, buffer, 1)) {
+ if (! i2c_read (address, 0, 1, buffer, 1)) {
return (int) buffer[0];
} else {
/*printf("i2c error %02x\n", rc); */
diff --git a/board/tb0229/tb0229.c b/board/tb0229/tb0229.c
index e7914bd..61c2e9b 100644
--- a/board/tb0229/tb0229.c
+++ b/board/tb0229/tb0229.c
@@ -13,10 +13,9 @@
#include <command.h>
#include <asm/addrspace.h>
#include <asm/inca-ip.h>
+#include <asm/io.h>
#include <pci.h>
-unsigned long mips_io_port_base = 0;
-
#if defined(CONFIG_PCI)
static struct pci_controller hose;
@@ -26,17 +25,17 @@ void pci_init_board (void)
}
#endif
-
long int initdram(int board_type)
{
return get_ram_size (CFG_SDRAM_BASE, 0x8000000);
}
-
int checkboard (void)
{
printf("Board: TANBAC TB0229 ");
printf("(CPU Speed %d MHz)\n", (int)CPU_CLOCK_RATE/1000000);
+ set_io_port_base(0);
+
return 0;
}
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index bb064ea..2202009 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -54,10 +54,6 @@
#ifndef __PPC__
#include <asm/io.h>
-#ifdef __MIPS__
-/* Macros depend on this variable */
-unsigned long mips_io_port_base = 0;
-#endif
#endif
#ifdef CONFIG_IDE_8xx_DIRECT
@@ -1136,9 +1132,9 @@ static void ide_ident (block_dev_desc_t *dev_desc)
input_swap_data (device, iobuf, ATA_SECTORWORDS);
- ident_cpy (dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision));
- ident_cpy (dev_desc->vendor, iop->model, sizeof(dev_desc->vendor));
- ident_cpy (dev_desc->product, iop->serial_no, sizeof(dev_desc->product));
+ ident_cpy ((unsigned char*)dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision));
+ ident_cpy ((unsigned char*)dev_desc->vendor, iop->model, sizeof(dev_desc->vendor));
+ ident_cpy ((unsigned char*)dev_desc->product, iop->serial_no, sizeof(dev_desc->product));
#ifdef __LITTLE_ENDIAN
/*
* firmware revision and model number have Big Endian Byte
@@ -1953,9 +1949,9 @@ static void atapi_inquiry(block_dev_desc_t * dev_desc)
return;
/* copy device ident strings */
- ident_cpy(dev_desc->vendor,&iobuf[8],8);
- ident_cpy(dev_desc->product,&iobuf[16],16);
- ident_cpy(dev_desc->revision,&iobuf[32],5);
+ ident_cpy((unsigned char*)dev_desc->vendor,&iobuf[8],8);
+ ident_cpy((unsigned char*)dev_desc->product,&iobuf[16],16);
+ ident_cpy((unsigned char*)dev_desc->revision,&iobuf[32],5);
dev_desc->lun=0;
dev_desc->lba=0;
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index 72e11d5..3b4dc8a 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -112,9 +112,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
"OUI = 0x%04X, "
"Model = 0x%02X, "
"Rev = 0x%02X, "
- "%3dbaseT, %s\n",
+ "%3dbase%s, %s\n",
j, oui, model, rev,
miiphy_speed (devname, j),
+ miiphy_is_1000base_x (devname, j)
+ ? "X" : "T",
(miiphy_duplex (devname, j) == FULL)
? "FDX" : "HDX");
}
@@ -496,9 +498,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
"OUI = 0x%04X, "
"Model = 0x%02X, "
"Rev = 0x%02X, "
- "%3dbaseT, %s\n",
+ "%3dbase%s, %s\n",
j, oui, model, rev,
miiphy_speed (devname, j),
+ miiphy_is_1000base_x (devname, j)
+ ? "X" : "T",
(miiphy_duplex (devname, j) == FULL)
? "FDX" : "HDX");
}
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index c69501f..281f0b2 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -49,10 +49,10 @@
struct mii_dev {
struct list_head link;
char *name;
- int (* read)(char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value);
- int (* write)(char *devname, unsigned char addr,
- unsigned char reg, unsigned short value);
+ int (*read) (char *devname, unsigned char addr,
+ unsigned char reg, unsigned short *value);
+ int (*write) (char *devname, unsigned char addr,
+ unsigned char reg, unsigned short value);
};
static struct list_head mii_devs;
@@ -62,21 +62,21 @@ static struct mii_dev *current_mii;
*
* Initialize global data. Need to be called before any other miiphy routine.
*/
-void miiphy_init()
+void miiphy_init ()
{
- INIT_LIST_HEAD(&mii_devs);
- current_mii = NULL;
+ INIT_LIST_HEAD (&mii_devs);
+ current_mii = NULL;
}
/*****************************************************************************
*
* Register read and write MII access routines for the device <name>.
*/
-void miiphy_register(char *name,
- int (* read)(char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value),
- int (* write)(char *devname, unsigned char addr,
- unsigned char reg, unsigned short value))
+void miiphy_register (char *name,
+ int (*read) (char *devname, unsigned char addr,
+ unsigned char reg, unsigned short *value),
+ int (*write) (char *devname, unsigned char addr,
+ unsigned char reg, unsigned short value))
{
struct list_head *entry;
struct mii_dev *new_dev;
@@ -84,63 +84,64 @@ void miiphy_register(char *name,
unsigned int name_len;
/* check if we have unique name */
- list_for_each(entry, &mii_devs) {
- miidev = list_entry(entry, struct mii_dev, link);
- if (strcmp(miidev->name, name) == 0) {
- printf("miiphy_register: non unique device name '%s'\n",
- name);
+ list_for_each (entry, &mii_devs) {
+ miidev = list_entry (entry, struct mii_dev, link);
+ if (strcmp (miidev->name, name) == 0) {
+ printf ("miiphy_register: non unique device name "
+ "'%s'\n", name);
return;
}
}
/* allocate memory */
- name_len = strlen(name);
- new_dev = (struct mii_dev *)malloc(sizeof(struct mii_dev) + name_len + 1);
+ name_len = strlen (name);
+ new_dev =
+ (struct mii_dev *)malloc (sizeof (struct mii_dev) + name_len + 1);
- if(new_dev == NULL) {
- printf("miiphy_register: cannot allocate memory for '%s'\n",
- name);
+ if (new_dev == NULL) {
+ printf ("miiphy_register: cannot allocate memory for '%s'\n",
+ name);
return;
}
- memset(new_dev, 0, sizeof(struct mii_dev) + name_len);
+ memset (new_dev, 0, sizeof (struct mii_dev) + name_len);
/* initalize mii_dev struct fields */
- INIT_LIST_HEAD(&new_dev->link);
+ INIT_LIST_HEAD (&new_dev->link);
new_dev->read = read;
new_dev->write = write;
new_dev->name = (char *)(new_dev + 1);
- strncpy(new_dev->name, name, name_len);
+ strncpy (new_dev->name, name, name_len);
new_dev->name[name_len] = '\0';
- debug("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
- new_dev->name, new_dev->read, new_dev->write);
+ debug ("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
+ new_dev->name, new_dev->read, new_dev->write);
/* add it to the list */
- list_add_tail(&new_dev->link, &mii_devs);
+ list_add_tail (&new_dev->link, &mii_devs);
if (!current_mii)
current_mii = new_dev;
}
-int miiphy_set_current_dev(char *devname)
+int miiphy_set_current_dev (char *devname)
{
struct list_head *entry;
struct mii_dev *dev;
- list_for_each(entry, &mii_devs) {
- dev = list_entry(entry, struct mii_dev, link);
+ list_for_each (entry, &mii_devs) {
+ dev = list_entry (entry, struct mii_dev, link);
- if (strcmp(devname, dev->name) == 0) {
+ if (strcmp (devname, dev->name) == 0) {
current_mii = dev;
return 0;
}
}
- printf("No such device: %s\n", devname);
+ printf ("No such device: %s\n", devname);
return 1;
}
-char *miiphy_get_current_dev()
+char *miiphy_get_current_dev ()
{
if (current_mii)
return current_mii->name;
@@ -156,8 +157,8 @@ char *miiphy_get_current_dev()
* Returns:
* 0 on success
*/
-int miiphy_read(char *devname, unsigned char addr, unsigned char reg,
- unsigned short *value)
+int miiphy_read (char *devname, unsigned char addr, unsigned char reg,
+ unsigned short *value)
{
struct list_head *entry;
struct mii_dev *dev;
@@ -165,22 +166,22 @@ int miiphy_read(char *devname, unsigned char addr, unsigned char reg,
int read_ret = 0;
if (!devname) {
- printf("NULL device name!\n");
+ printf ("NULL device name!\n");
return 1;
}
- list_for_each(entry, &mii_devs) {
- dev = list_entry(entry, struct mii_dev, link);
+ list_for_each (entry, &mii_devs) {
+ dev = list_entry (entry, struct mii_dev, link);
- if (strcmp(devname, dev->name) == 0) {
+ if (strcmp (devname, dev->name) == 0) {
found_dev = 1;
- read_ret = dev->read(devname, addr, reg, value);
+ read_ret = dev->read (devname, addr, reg, value);
break;
}
}
if (found_dev == 0)
- printf("No such device: %s\n", devname);
+ printf ("No such device: %s\n", devname);
return ((found_dev) ? read_ret : 1);
}
@@ -193,8 +194,8 @@ int miiphy_read(char *devname, unsigned char addr, unsigned char reg,
* Returns:
* 0 on success
*/
-int miiphy_write(char *devname, unsigned char addr, unsigned char reg,
- unsigned short value)
+int miiphy_write (char *devname, unsigned char addr, unsigned char reg,
+ unsigned short value)
{
struct list_head *entry;
struct mii_dev *dev;
@@ -202,22 +203,22 @@ int miiphy_write(char *devname, unsigned char addr, unsigned char reg,
int write_ret = 0;
if (!devname) {
- printf("NULL device name!\n");
+ printf ("NULL device name!\n");
return 1;
}
- list_for_each(entry, &mii_devs) {
- dev = list_entry(entry, struct mii_dev, link);
+ list_for_each (entry, &mii_devs) {
+ dev = list_entry (entry, struct mii_dev, link);
- if (strcmp(devname, dev->name) == 0) {
+ if (strcmp (devname, dev->name) == 0) {
found_dev = 1;
- write_ret = dev->write(devname, addr, reg, value);
+ write_ret = dev->write (devname, addr, reg, value);
break;
}
}
if (found_dev == 0)
- printf("No such device: %s\n", devname);
+ printf ("No such device: %s\n", devname);
return ((found_dev) ? write_ret : 1);
}
@@ -226,23 +227,22 @@ int miiphy_write(char *devname, unsigned char addr, unsigned char reg,
*
* Print out list of registered MII capable devices.
*/
-void miiphy_listdev(void)
+void miiphy_listdev (void)
{
struct list_head *entry;
struct mii_dev *dev;
- puts("MII devices: ");
- list_for_each(entry, &mii_devs) {
- dev = list_entry(entry, struct mii_dev, link);
- printf("'%s' ", dev->name);
+ puts ("MII devices: ");
+ list_for_each (entry, &mii_devs) {
+ dev = list_entry (entry, struct mii_dev, link);
+ printf ("'%s' ", dev->name);
}
- puts("\n");
+ puts ("\n");
if (current_mii)
- printf("Current device: '%s'\n", current_mii->name);
+ printf ("Current device: '%s'\n", current_mii->name);
}
-
/*****************************************************************************
*
* Read the OUI, manufacture's model number, and revision number.
@@ -254,9 +254,7 @@ void miiphy_listdev(void)
* Returns:
* 0 on success
*/
-int miiphy_info (char *devname,
- unsigned char addr,
- unsigned int *oui,
+int miiphy_info (char *devname, unsigned char addr, unsigned int *oui,
unsigned char *model, unsigned char *rev)
{
unsigned int reg = 0;
@@ -288,13 +286,12 @@ int miiphy_info (char *devname,
#ifdef DEBUG
printf ("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
#endif
- *oui = ( reg >> 10);
- *model = (unsigned char) ((reg >> 4) & 0x0000003F);
- *rev = (unsigned char) ( reg & 0x0000000F);
+ *oui = (reg >> 10);
+ *model = (unsigned char)((reg >> 4) & 0x0000003F);
+ *rev = (unsigned char)(reg & 0x0000000F);
return (0);
}
-
/*****************************************************************************
*
* Reset the PHY.
@@ -345,104 +342,138 @@ int miiphy_reset (char *devname, unsigned char addr)
return (0);
}
-
/*****************************************************************************
*
- * Determine the ethernet speed (10/100).
+ * Determine the ethernet speed (10/100/1000). Return 10 on error.
*/
int miiphy_speed (char *devname, unsigned char addr)
{
- unsigned short reg;
+ u16 bmcr, anlpar;
#if defined(CONFIG_PHY_GIGE)
- if (miiphy_read (devname, addr, PHY_1000BTSR, &reg)) {
- printf ("PHY 1000BT Status read failed\n");
- } else {
- if (reg != 0xFFFF) {
- if ((reg & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) !=0) {
- return (_1000BASET);
- }
- }
+ u16 btsr;
+
+ /*
+ * Check for 1000BASE-X. If it is supported, then assume that the speed
+ * is 1000.
+ */
+ if (miiphy_is_1000base_x (devname, addr)) {
+ return _1000BASET;
+ }
+ /*
+ * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
+ */
+ /* Check for 1000BASE-T. */
+ if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) {
+ printf ("PHY 1000BT status");
+ goto miiphy_read_failed;
+ }
+ if (btsr != 0xFFFF &&
+ (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD))) {
+ return _1000BASET;
}
#endif /* CONFIG_PHY_GIGE */
/* Check Basic Management Control Register first. */
- if (miiphy_read (devname, addr, PHY_BMCR, &reg)) {
- puts ("PHY speed read failed, assuming 10bT\n");
- return (_10BASET);
+ if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) {
+ printf ("PHY speed");
+ goto miiphy_read_failed;
}
/* Check if auto-negotiation is on. */
- if ((reg & PHY_BMCR_AUTON) != 0) {
+ if (bmcr & PHY_BMCR_AUTON) {
/* Get auto-negotiation results. */
- if (miiphy_read (devname, addr, PHY_ANLPAR, &reg)) {
- puts ("PHY AN speed read failed, assuming 10bT\n");
- return (_10BASET);
- }
- if ((reg & PHY_ANLPAR_100) != 0) {
- return (_100BASET);
- } else {
- return (_10BASET);
+ if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+ printf ("PHY AN speed");
+ goto miiphy_read_failed;
}
+ return (anlpar & PHY_ANLPAR_100) ? _100BASET : _10BASET;
}
/* Get speed from basic control settings. */
- else if (reg & PHY_BMCR_100MB) {
- return (_100BASET);
- } else {
- return (_10BASET);
- }
+ return (bmcr & PHY_BMCR_100MB) ? _100BASET : _10BASET;
+ miiphy_read_failed:
+ printf (" read failed, assuming 10BASE-T\n");
+ return _10BASET;
}
-
/*****************************************************************************
*
- * Determine full/half duplex.
+ * Determine full/half duplex. Return half on error.
*/
int miiphy_duplex (char *devname, unsigned char addr)
{
- unsigned short reg;
+ u16 bmcr, anlpar;
#if defined(CONFIG_PHY_GIGE)
- if (miiphy_read (devname, addr, PHY_1000BTSR, &reg)) {
- printf ("PHY 1000BT Status read failed\n");
- } else {
- if ( (reg != 0xFFFF) &&
- (reg & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) ) {
- if ((reg & PHY_1000BTSR_1000FD) !=0) {
- return (FULL);
- } else {
- return (HALF);
- }
+ u16 btsr;
+
+ /* Check for 1000BASE-X. */
+ if (miiphy_is_1000base_x (devname, addr)) {
+ /* 1000BASE-X */
+ if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+ printf ("1000BASE-X PHY AN duplex");
+ goto miiphy_read_failed;
+ }
+ }
+ /*
+ * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
+ */
+ /* Check for 1000BASE-T. */
+ if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) {
+ printf ("PHY 1000BT status");
+ goto miiphy_read_failed;
+ }
+ if (btsr != 0xFFFF) {
+ if (btsr & PHY_1000BTSR_1000FD) {
+ return FULL;
+ } else if (btsr & PHY_1000BTSR_1000HD) {
+ return HALF;
}
}
#endif /* CONFIG_PHY_GIGE */
/* Check Basic Management Control Register first. */
- if (miiphy_read (devname, addr, PHY_BMCR, &reg)) {
- puts ("PHY duplex read failed, assuming half duplex\n");
- return (HALF);
+ if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) {
+ puts ("PHY duplex");
+ goto miiphy_read_failed;
}
/* Check if auto-negotiation is on. */
- if ((reg & PHY_BMCR_AUTON) != 0) {
+ if (bmcr & PHY_BMCR_AUTON) {
/* Get auto-negotiation results. */
- if (miiphy_read (devname, addr, PHY_ANLPAR, &reg)) {
- puts ("PHY AN duplex read failed, assuming half duplex\n");
- return (HALF);
- }
-
- if ((reg & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) != 0) {
- return (FULL);
- } else {
- return (HALF);
+ if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+ puts ("PHY AN duplex");
+ goto miiphy_read_failed;
}
+ return (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) ?
+ FULL : HALF;
}
/* Get speed from basic control settings. */
- else if (reg & PHY_BMCR_DPLX) {
- return (FULL);
- } else {
- return (HALF);
- }
+ return (bmcr & PHY_BMCR_DPLX) ? FULL : HALF;
+
+ miiphy_read_failed:
+ printf (" read failed, assuming half duplex\n");
+ return HALF;
+}
+/*****************************************************************************
+ *
+ * Return 1 if PHY supports 1000BASE-X, 0 if PHY supports 10BASE-T/100BASE-TX/
+ * 1000BASE-T, or on error.
+ */
+int miiphy_is_1000base_x (char *devname, unsigned char addr)
+{
+#if defined(CONFIG_PHY_GIGE)
+ u16 exsr;
+
+ if (miiphy_read (devname, addr, PHY_EXSR, &exsr)) {
+ printf ("PHY extended status read failed, assuming no "
+ "1000BASE-X\n");
+ return 0;
+ }
+ return 0 != (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH));
+#else
+ return 0;
+#endif
}
#ifdef CFG_FAULT_ECHO_LINK_DOWN
@@ -455,7 +486,7 @@ int miiphy_link (char *devname, unsigned char addr)
unsigned short reg;
/* dummy read; needed to latch some phys */
- (void)miiphy_read(devname, addr, PHY_BMSR, &reg);
+ (void)miiphy_read (devname, addr, PHY_BMSR, &reg);
if (miiphy_read (devname, addr, PHY_BMSR, &reg)) {
puts ("PHY_BMSR read failed, assuming no link\n");
return (0);
@@ -469,5 +500,4 @@ int miiphy_link (char *devname, unsigned char addr)
}
}
#endif
-
#endif /* CONFIG_MII */
diff --git a/common/spartan2.c b/common/spartan2.c
index 0fb23b6..06550b9 100644
--- a/common/spartan2.c
+++ b/common/spartan2.c
@@ -516,7 +516,7 @@ static int Spartan2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
(*fn->clk) (FALSE, TRUE, cookie);
CONFIG_FPGA_DELAY ();
/* Write data */
- (*fn->wr) ((val < 0), TRUE, cookie);
+ (*fn->wr) ((val & 0x80), TRUE, cookie);
CONFIG_FPGA_DELAY ();
/* Assert the clock */
(*fn->clk) (TRUE, TRUE, cookie);
diff --git a/common/spartan3.c b/common/spartan3.c
index c0f2b05..f7c4f8c 100644
--- a/common/spartan3.c
+++ b/common/spartan3.c
@@ -521,7 +521,7 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
(*fn->clk) (FALSE, TRUE, cookie);
CONFIG_FPGA_DELAY ();
/* Write data */
- (*fn->wr) ((val < 0), TRUE, cookie);
+ (*fn->wr) ((val & 0x80), TRUE, cookie);
CONFIG_FPGA_DELAY ();
/* Assert the clock */
(*fn->clk) (TRUE, TRUE, cookie);
diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c
index 9456471..d83bedd 100644
--- a/cpu/mpc86xx/cpu.c
+++ b/cpu/mpc86xx/cpu.c
@@ -120,7 +120,7 @@ checkcpu(void)
static inline void
soft_restart(unsigned long addr)
{
-#ifndef CONFIG_MPC8641HPCN
+#if !defined(CONFIG_MPC8641HPCN) && !defined(CONFIG_MPC8610HPCD)
/*
* SRR0 has system reset vector, SRR1 has default MSR value
@@ -148,7 +148,7 @@ soft_restart(unsigned long addr)
void
do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
-#ifndef CONFIG_MPC8641HPCN
+#if !defined(CONFIG_MPC8641HPCN) && !defined(CONFIG_MPC8610HPCD)
#ifdef CFG_RESET_ADDRESS
ulong addr = CFG_RESET_ADDRESS;
diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c
index 059097f..d57bcdf 100644
--- a/cpu/mpc86xx/spd_sdram.c
+++ b/cpu/mpc86xx/spd_sdram.c
@@ -1270,10 +1270,12 @@ spd_sdram(void)
debug("\nDDR: LAWBAR8=0x%08x\n", mcm->lawbar8);
debug("DDR: LAWAR8=0x%08x\n", mcm->lawar8);
}
+
+ debug("\nMemory size of DDR2 = 0x%08lx\n", memsize_ddr2);
+
#endif /* CONFIG_NUM_DDR_CONTROLLERS > 1 */
- debug("\nMemory sizes are DDR1 = 0x%08lx, DDR2 = 0x%08lx\n",
- memsize_ddr1, memsize_ddr2);
+ debug("\nMemory size of DDR1 = 0x%08lx\n", memsize_ddr1);
/*
* If neither DDR controller is enabled return 0.
diff --git a/drivers/Makefile b/drivers/Makefile
index d19588f..207606a 100755
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -41,7 +41,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o at45.o ata_piix.o \
omap24xx_i2c.o pc_keyb.o \
pci.o pci_auto.o pci_indirect.o \
pcnet.o plb2800_eth.o ps2ser.o ps2mult.o pxa_pcmcia.o \
- rpx_pcmcia.o rtl8019.o rtl8139.o rtl8169.o \
+ rpx_pcmcia.o rtl8019.o rtl8139.o rtl8169.o uli526x.o\
s3c4510b_eth.o s3c4510b_uart.o \
sed13806.o sed156x.o \
serial.o serial_max3100.o \
diff --git a/drivers/uli526x.c b/drivers/uli526x.c
new file mode 100644
index 0000000..1267c57
--- /dev/null
+++ b/drivers/uli526x.c
@@ -0,0 +1,996 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Roy Zang <tie-fei.zang@freescale.com>, Sep, 2007
+ *
+ * Description:
+ * ULI 526x Ethernet port driver.
+ * Based on the Linux driver: drivers/net/tulip/uli526x.c
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+#include <miiphy.h>
+
+/* some kernel function compatible define */
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+ defined(CONFIG_ULI526X)
+
+#undef DEBUG
+
+/* Board/System/Debug information/definition */
+#define ULI_VENDOR_ID 0x10B9
+#define ULI5261_DEVICE_ID 0x5261
+#define ULI5263_DEVICE_ID 0x5263
+/* ULi M5261 ID*/
+#define PCI_ULI5261_ID ULI5261_DEVICE_ID << 16 | ULI_VENDOR_ID
+/* ULi M5263 ID*/
+#define PCI_ULI5263_ID ULI5263_DEVICE_ID << 16 | ULI_VENDOR_ID
+
+#define ULI526X_IO_SIZE 0x100
+#define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */
+#define RX_DESC_CNT PKTBUFSRX /* Allocated Rx descriptors */
+#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */
+#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */
+#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT)
+#define TX_BUF_ALLOC 0x300
+#define RX_ALLOC_SIZE PKTSIZE
+#define ULI526X_RESET 1
+#define CR0_DEFAULT 0
+#define CR6_DEFAULT 0x22200000
+#define CR7_DEFAULT 0x180c1
+#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */
+#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */
+#define MAX_PACKET_SIZE 1514
+#define ULI5261_MAX_MULTICAST 14
+#define RX_COPY_SIZE 100
+#define MAX_CHECK_PACKET 0x8000
+
+#define ULI526X_10MHF 0
+#define ULI526X_100MHF 1
+#define ULI526X_10MFD 4
+#define ULI526X_100MFD 5
+#define ULI526X_AUTO 8
+
+#define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */
+#define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */
+#define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */
+#define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */
+#define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */
+#define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */
+
+/* CR9 definition: SROM/MII */
+#define CR9_SROM_READ 0x4800
+#define CR9_SRCS 0x1
+#define CR9_SRCLK 0x2
+#define CR9_CRDOUT 0x8
+#define SROM_DATA_0 0x0
+#define SROM_DATA_1 0x4
+#define PHY_DATA_1 0x20000
+#define PHY_DATA_0 0x00000
+#define MDCLKH 0x10000
+
+#define PHY_POWER_DOWN 0x800
+
+#define SROM_V41_CODE 0x14
+
+#define SROM_CLK_WRITE(data, ioaddr) do { \
+ outl(data|CR9_SROM_READ|CR9_SRCS, ioaddr); \
+ udelay(5); \
+ outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK, ioaddr); \
+ udelay(5); \
+ outl(data|CR9_SROM_READ|CR9_SRCS, ioaddr); \
+ udelay(5); \
+ } while (0)
+
+/* Structure/enum declaration */
+
+struct tx_desc {
+ u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
+ char *tx_buf_ptr; /* Data for us */
+ struct tx_desc *next_tx_desc;
+};
+
+struct rx_desc {
+ u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
+ char *rx_buf_ptr; /* Data for us */
+ struct rx_desc *next_rx_desc;
+};
+
+struct uli526x_board_info {
+ u32 chip_id; /* Chip vendor/Device ID */
+ pci_dev_t pdev;
+
+ long ioaddr; /* I/O base address */
+ u32 cr0_data;
+ u32 cr5_data;
+ u32 cr6_data;
+ u32 cr7_data;
+ u32 cr15_data;
+
+ /* pointer for memory physical address */
+ dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */
+ dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */
+ dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */
+ dma_addr_t first_tx_desc_dma;
+ dma_addr_t first_rx_desc_dma;
+
+ /* descriptor pointer */
+ unsigned char *buf_pool_ptr; /* Tx buffer pool memory */
+ unsigned char *buf_pool_start; /* Tx buffer pool align dword */
+ unsigned char *desc_pool_ptr; /* descriptor pool memory */
+ struct tx_desc *first_tx_desc;
+ struct tx_desc *tx_insert_ptr;
+ struct tx_desc *tx_remove_ptr;
+ struct rx_desc *first_rx_desc;
+ struct rx_desc *rx_ready_ptr; /* packet come pointer */
+ unsigned long tx_packet_cnt; /* transmitted packet count */
+
+ u16 PHY_reg4; /* Saved Phyxcer register 4 value */
+
+ u8 media_mode; /* user specify media mode */
+ u8 op_mode; /* real work dedia mode */
+ u8 phy_addr;
+
+ /* NIC SROM data */
+ unsigned char srom[128];
+};
+
+enum uli526x_offsets {
+ DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
+ DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
+ DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
+ DCR15 = 0x78
+};
+
+enum uli526x_CR6_bits {
+ CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
+ CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
+ CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
+};
+
+/* Global variable declaration -- */
+
+static unsigned char uli526x_media_mode = ULI526X_AUTO;
+
+static struct tx_desc desc_pool_array[DESC_ALL_CNT + 0x20]
+ __attribute__ ((aligned(32)));
+static char buf_pool[TX_BUF_ALLOC * TX_DESC_CNT + 4];
+
+/* For module input parameter */
+static int mode = 8;
+
+/* function declaration -- */
+static int uli526x_start_xmit(struct eth_device *dev,
+ volatile void *packet, int length);
+static const struct ethtool_ops netdev_ethtool_ops;
+static u16 read_srom_word(long, int);
+static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
+static void allocate_rx_buffer(struct uli526x_board_info *);
+static void update_cr6(u32, unsigned long);
+static u16 phy_read(unsigned long, u8, u8, u32);
+static u16 phy_readby_cr10(unsigned long, u8, u8);
+static void phy_write(unsigned long, u8, u8, u16, u32);
+static void phy_writeby_cr10(unsigned long, u8, u8, u16);
+static void phy_write_1bit(unsigned long, u32, u32);
+static u16 phy_read_1bit(unsigned long, u32);
+static int uli526x_rx_packet(struct eth_device *);
+static void uli526x_free_tx_pkt(struct eth_device *,
+ struct uli526x_board_info *);
+static void uli526x_reuse_buf(struct rx_desc *);
+static void uli526x_init(struct eth_device *);
+static void uli526x_set_phyxcer(struct uli526x_board_info *);
+
+
+static int uli526x_init_one(struct eth_device *, bd_t *);
+static void uli526x_disable(struct eth_device *);
+static void set_mac_addr(struct eth_device *);
+
+static struct pci_device_id uli526x_pci_tbl[] = {
+ { ULI_VENDOR_ID, ULI5261_DEVICE_ID}, /* 5261 device */
+ { ULI_VENDOR_ID, ULI5263_DEVICE_ID}, /* 5263 device */
+ {}
+};
+
+/* ULI526X network board routine */
+
+/*
+ * Search ULI526X board, register it
+ */
+
+int uli526x_initialize(bd_t *bis)
+{
+ pci_dev_t devno;
+ int card_number = 0;
+ struct eth_device *dev;
+ struct uli526x_board_info *db; /* board information structure */
+
+ u32 iobase;
+ int idx = 0;
+
+ while (1) {
+ /* Find PCI device */
+ devno = pci_find_devices(uli526x_pci_tbl, idx++);
+ if (devno < 0)
+ break;
+
+ pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
+ iobase &= ~0xf;
+
+ dev = (struct eth_device *)malloc(sizeof *dev);
+ sprintf(dev->name, "uli526x#%d\n", card_number);
+ db = (struct uli526x_board_info *)
+ malloc(sizeof(struct uli526x_board_info));
+
+ dev->priv = db;
+ db->pdev = devno;
+ dev->iobase = iobase;
+
+ dev->init = uli526x_init_one;
+ dev->halt = uli526x_disable;
+ dev->send = uli526x_start_xmit;
+ dev->recv = uli526x_rx_packet;
+
+ /* init db */
+ db->ioaddr = dev->iobase;
+ /* get chip id */
+
+ pci_read_config_dword(devno, PCI_VENDOR_ID, &db->chip_id);
+#ifdef DEBUG
+ printf("uli526x: uli526x @0x%x\n", iobase);
+ printf("uli526x: chip_id%x\n", db->chip_id);
+#endif
+ eth_register(dev);
+ card_number++;
+ pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);
+ udelay(10 * 1000);
+ }
+ return card_number;
+}
+
+static int uli526x_init_one(struct eth_device *dev, bd_t *bis)
+{
+
+ struct uli526x_board_info *db = dev->priv;
+ int i;
+
+ switch (mode) {
+ case ULI526X_10MHF:
+ case ULI526X_100MHF:
+ case ULI526X_10MFD:
+ case ULI526X_100MFD:
+ uli526x_media_mode = mode;
+ break;
+ default:
+ uli526x_media_mode = ULI526X_AUTO;
+ break;
+ }
+
+ /* Allocate Tx/Rx descriptor memory */
+ db->desc_pool_ptr = (uchar *)&desc_pool_array[0];
+ db->desc_pool_dma_ptr = (dma_addr_t)&desc_pool_array[0];
+ if (db->desc_pool_ptr == NULL)
+ return 0;
+
+ db->buf_pool_ptr = &buf_pool[0];
+ db->buf_pool_dma_ptr = (dma_addr_t)&buf_pool[0];
+ if (db->buf_pool_ptr == NULL)
+ return 0;
+
+ db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
+ db->first_tx_desc_dma = db->desc_pool_dma_ptr;
+
+ db->buf_pool_start = db->buf_pool_ptr;
+ db->buf_pool_dma_start = db->buf_pool_dma_ptr;
+
+#ifdef DEBUG
+ printf("%s(): db->ioaddr= 0x%x\n",
+ __FUNCTION__, db->ioaddr);
+ printf("%s(): media_mode= 0x%x\n",
+ __FUNCTION__, uli526x_media_mode);
+ printf("%s(): db->desc_pool_ptr= 0x%x\n",
+ __FUNCTION__, db->desc_pool_ptr);
+ printf("%s(): db->desc_pool_dma_ptr= 0x%x\n",
+ __FUNCTION__, db->desc_pool_dma_ptr);
+ printf("%s(): db->buf_pool_ptr= 0x%x\n",
+ __FUNCTION__, db->buf_pool_ptr);
+ printf("%s(): db->buf_pool_dma_ptr= 0x%x\n",
+ __FUNCTION__, db->buf_pool_dma_ptr);
+#endif
+
+ /* read 64 word srom data */
+ for (i = 0; i < 64; i++)
+ ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr,
+ i));
+
+ /* Set Node address */
+ if (((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0)
+ /* SROM absent, so write MAC address to ID Table */
+ set_mac_addr(dev);
+ else { /*Exist SROM*/
+ for (i = 0; i < 6; i++)
+ dev->enetaddr[i] = db->srom[20 + i];
+ }
+#ifdef DEBUG
+ for (i = 0; i < 6; i++)
+ printf("%c%02x", i ? ':' : ' ', dev->enetaddr[i]);
+#endif
+ db->PHY_reg4 = 0x1e0;
+
+ /* system variable init */
+ db->cr6_data = CR6_DEFAULT ;
+ db->cr6_data |= ULI526X_TXTH_256;
+ db->cr0_data = CR0_DEFAULT;
+ uli526x_init(dev);
+ return 1;
+}
+
+static void uli526x_disable(struct eth_device *dev)
+{
+#ifdef DEBUG
+ printf("uli526x_disable\n");
+#endif
+ struct uli526x_board_info *db = dev->priv;
+
+ if (!((inl(db->ioaddr + DCR12)) & 0x8)) {
+ /* Reset & stop ULI526X board */
+ outl(ULI526X_RESET, db->ioaddr + DCR0);
+ udelay(5);
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+
+ /* reset the board */
+ db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
+ update_cr6(db->cr6_data, dev->iobase);
+ outl(0, dev->iobase + DCR7); /* Disable Interrupt */
+ outl(inl(dev->iobase + DCR5), dev->iobase + DCR5);
+ }
+}
+
+/* Initialize ULI526X board
+ * Reset ULI526X board
+ * Initialize TX/Rx descriptor chain structure
+ * Send the set-up frame
+ * Enable Tx/Rx machine
+ */
+
+static void uli526x_init(struct eth_device *dev)
+{
+
+ struct uli526x_board_info *db = dev->priv;
+ u8 phy_tmp;
+ u16 phy_value;
+ u16 phy_reg_reset;
+
+ /* Reset M526x MAC controller */
+ outl(ULI526X_RESET, db->ioaddr + DCR0); /* RESET MAC */
+ udelay(100);
+ outl(db->cr0_data, db->ioaddr + DCR0);
+ udelay(5);
+
+ /* Phy addr : In some boards,M5261/M5263 phy address != 1 */
+ db->phy_addr = 1;
+ db->tx_packet_cnt = 0;
+ for (phy_tmp = 0; phy_tmp < 32; phy_tmp++) {
+ /* peer add */
+ phy_value = phy_read(db->ioaddr, phy_tmp, 3, db->chip_id);
+ if (phy_value != 0xffff && phy_value != 0) {
+ db->phy_addr = phy_tmp;
+ break;
+ }
+ }
+
+#ifdef DEBUG
+ printf("%s(): db->ioaddr= 0x%x\n", __FUNCTION__, db->ioaddr);
+ printf("%s(): db->phy_addr= 0x%x\n", __FUNCTION__, db->phy_addr);
+#endif
+ if (phy_tmp == 32)
+ printf("Can not find the phy address!!!");
+
+ /* Parser SROM and media mode */
+ db->media_mode = uli526x_media_mode;
+
+ if (!(inl(db->ioaddr + DCR12) & 0x8)) {
+ /* Phyxcer capability setting */
+ phy_reg_reset = phy_read(db->ioaddr,
+ db->phy_addr, 0, db->chip_id);
+ phy_reg_reset = (phy_reg_reset | 0x8000);
+ phy_write(db->ioaddr, db->phy_addr, 0,
+ phy_reg_reset, db->chip_id);
+ udelay(500);
+
+ /* Process Phyxcer Media Mode */
+ uli526x_set_phyxcer(db);
+ }
+ /* Media Mode Process */
+ if (!(db->media_mode & ULI526X_AUTO))
+ db->op_mode = db->media_mode; /* Force Mode */
+
+ /* Initialize Transmit/Receive decriptor and CR3/4 */
+ uli526x_descriptor_init(db, db->ioaddr);
+
+ /* Init CR6 to program M526X operation */
+ update_cr6(db->cr6_data, db->ioaddr);
+
+ /* Init CR7, interrupt active bit */
+ db->cr7_data = CR7_DEFAULT;
+ outl(db->cr7_data, db->ioaddr + DCR7);
+
+ /* Init CR15, Tx jabber and Rx watchdog timer */
+ outl(db->cr15_data, db->ioaddr + DCR15);
+
+ /* Enable ULI526X Tx/Rx function */
+ db->cr6_data |= CR6_RXSC | CR6_TXSC;
+ update_cr6(db->cr6_data, db->ioaddr);
+ while (!(inl(db->ioaddr + DCR12) & 0x8))
+ udelay(10);
+}
+
+/*
+ * Hardware start transmission.
+ * Send a packet to media from the upper layer.
+ */
+
+static int uli526x_start_xmit(struct eth_device *dev,
+ volatile void *packet, int length)
+{
+ struct uli526x_board_info *db = dev->priv;
+ struct tx_desc *txptr;
+ unsigned int len = length;
+ /* Too large packet check */
+ if (len > MAX_PACKET_SIZE) {
+ printf(": big packet = %d\n", len);
+ return 0;
+ }
+
+ /* No Tx resource check, it never happen nromally */
+ if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
+ printf("No Tx resource %ld\n", db->tx_packet_cnt);
+ return 0;
+ }
+
+ /* Disable NIC interrupt */
+ outl(0, dev->iobase + DCR7);
+
+ /* transmit this packet */
+ txptr = db->tx_insert_ptr;
+ memcpy((char *)txptr->tx_buf_ptr, (char *)packet, (int)length);
+ txptr->tdes1 = cpu_to_le32(0xe1000000 | length);
+
+ /* Point to next transmit free descriptor */
+ db->tx_insert_ptr = txptr->next_tx_desc;
+
+ /* Transmit Packet Process */
+ if ((db->tx_packet_cnt < TX_DESC_CNT)) {
+ txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */
+ db->tx_packet_cnt++; /* Ready to send */
+ outl(0x1, dev->iobase + DCR1); /* Issue Tx polling */
+ }
+
+ /* Got ULI526X status */
+ db->cr5_data = inl(db->ioaddr + DCR5);
+ outl(db->cr5_data, db->ioaddr + DCR5);
+
+#ifdef TX_DEBUG
+ printf("%s(): length = 0x%x\n", __FUNCTION__, length);
+ printf("%s(): cr5_data=%x\n", __FUNCTION__, db->cr5_data);
+#endif
+
+ outl(db->cr7_data, dev->iobase + DCR7);
+ uli526x_free_tx_pkt(dev, db);
+
+ return length;
+}
+
+/*
+ * Free TX resource after TX complete
+ */
+
+static void uli526x_free_tx_pkt(struct eth_device *dev,
+ struct uli526x_board_info *db)
+{
+ struct tx_desc *txptr;
+ u32 tdes0;
+
+ txptr = db->tx_remove_ptr;
+ while (db->tx_packet_cnt) {
+ tdes0 = le32_to_cpu(txptr->tdes0);
+ /* printf(DRV_NAME ": tdes0=%x\n", tdes0); */
+ if (tdes0 & 0x80000000)
+ break;
+
+ /* A packet sent completed */
+ db->tx_packet_cnt--;
+
+ if (tdes0 != 0x7fffffff) {
+#ifdef TX_DEBUG
+ printf("%s()tdes0=%x\n", __FUNCTION__, tdes0);
+#endif
+ if (tdes0 & TDES0_ERR_MASK) {
+ if (tdes0 & 0x0002) { /* UnderRun */
+ if (!(db->cr6_data & CR6_SFT)) {
+ db->cr6_data = db->cr6_data |
+ CR6_SFT;
+ update_cr6(db->cr6_data,
+ db->ioaddr);
+ }
+ }
+ }
+ }
+
+ txptr = txptr->next_tx_desc;
+ }/* End of while */
+
+ /* Update TX remove pointer to next */
+ db->tx_remove_ptr = txptr;
+}
+
+
+/*
+ * Receive the come packet and pass to upper layer
+ */
+
+static int uli526x_rx_packet(struct eth_device *dev)
+{
+ struct uli526x_board_info *db = dev->priv;
+ struct rx_desc *rxptr;
+ int rxlen = 0;
+ u32 rdes0;
+
+ rxptr = db->rx_ready_ptr;
+
+ rdes0 = le32_to_cpu(rxptr->rdes0);
+#ifdef RX_DEBUG
+ printf("%s(): rxptr->rdes0=%x:%x\n", __FUNCTION__, rxptr->rdes0);
+#endif
+ if (!(rdes0 & 0x80000000)) { /* packet owner check */
+ if ((rdes0 & 0x300) != 0x300) {
+ /* A packet without First/Last flag */
+ /* reuse this buf */
+ printf("A packet without First/Last flag");
+ uli526x_reuse_buf(rxptr);
+ } else {
+ /* A packet with First/Last flag */
+ rxlen = ((rdes0 >> 16) & 0x3fff) - 4;
+#ifdef RX_DEBUG
+ printf("%s(): rxlen =%x\n", __FUNCTION__, rxlen);
+#endif
+ /* error summary bit check */
+ if (rdes0 & 0x8000) {
+ /* This is a error packet */
+ printf("Eroor: rdes0: %lx\n", rdes0);
+ }
+
+ if (!(rdes0 & 0x8000) ||
+ ((db->cr6_data & CR6_PM) && (rxlen > 6))) {
+
+#ifdef RX_DEBUG
+ printf("%s(): rx_skb_ptr =%x\n",
+ __FUNCTION__, rxptr->rx_buf_ptr);
+ printf("%s(): rxlen =%x\n",
+ __FUNCTION__, rxlen);
+
+ printf("%s(): buf addr =%x\n",
+ __FUNCTION__, rxptr->rx_buf_ptr);
+ printf("%s(): rxlen =%x\n",
+ __FUNCTION__, rxlen);
+ int i;
+ for (i = 0; i < 0x20; i++)
+ printf("%s(): data[%x] =%x\n",
+ __FUNCTION__, i, rxptr->rx_buf_ptr[i]);
+#endif
+
+ NetReceive(rxptr->rx_buf_ptr, rxlen);
+ uli526x_reuse_buf(rxptr);
+
+ } else {
+ /* Reuse SKB buffer when the packet is error */
+ printf("Reuse buffer, rdes0");
+ uli526x_reuse_buf(rxptr);
+ }
+ }
+
+ rxptr = rxptr->next_rx_desc;
+ }
+
+ db->rx_ready_ptr = rxptr;
+ return rxlen;
+}
+
+/*
+ * Reuse the RX buffer
+ */
+
+static void uli526x_reuse_buf(struct rx_desc *rxptr)
+{
+
+ if (!(rxptr->rdes0 & cpu_to_le32(0x80000000)))
+ rxptr->rdes0 = cpu_to_le32(0x80000000);
+ else
+ printf("Buffer reuse method error");
+}
+/*
+ * Initialize transmit/Receive descriptor
+ * Using Chain structure, and allocate Tx/Rx buffer
+ */
+
+static void uli526x_descriptor_init(struct uli526x_board_info *db,
+ unsigned long ioaddr)
+{
+ struct tx_desc *tmp_tx;
+ struct rx_desc *tmp_rx;
+ unsigned char *tmp_buf;
+ dma_addr_t tmp_tx_dma, tmp_rx_dma;
+ dma_addr_t tmp_buf_dma;
+ int i;
+ /* tx descriptor start pointer */
+ db->tx_insert_ptr = db->first_tx_desc;
+ db->tx_remove_ptr = db->first_tx_desc;
+
+ outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */
+
+ /* rx descriptor start pointer */
+ db->first_rx_desc = (void *)db->first_tx_desc +
+ sizeof(struct tx_desc) * TX_DESC_CNT;
+ db->first_rx_desc_dma = db->first_tx_desc_dma +
+ sizeof(struct tx_desc) * TX_DESC_CNT;
+ db->rx_ready_ptr = db->first_rx_desc;
+ outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */
+#ifdef DEBUG
+ printf("%s(): db->first_tx_desc= 0x%x\n",
+ __FUNCTION__, db->first_tx_desc);
+ printf("%s(): db->first_rx_desc_dma= 0x%x\n",
+ __FUNCTION__, db->first_rx_desc_dma);
+#endif
+ /* Init Transmit chain */
+ tmp_buf = db->buf_pool_start;
+ tmp_buf_dma = db->buf_pool_dma_start;
+ tmp_tx_dma = db->first_tx_desc_dma;
+ for (tmp_tx = db->first_tx_desc, i = 0;
+ i < TX_DESC_CNT; i++, tmp_tx++) {
+ tmp_tx->tx_buf_ptr = tmp_buf;
+ tmp_tx->tdes0 = cpu_to_le32(0);
+ tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */
+ tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma);
+ tmp_tx_dma += sizeof(struct tx_desc);
+ tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma);
+ tmp_tx->next_tx_desc = tmp_tx + 1;
+ tmp_buf = tmp_buf + TX_BUF_ALLOC;
+ tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC;
+ }
+ (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma);
+ tmp_tx->next_tx_desc = db->first_tx_desc;
+
+ /* Init Receive descriptor chain */
+ tmp_rx_dma = db->first_rx_desc_dma;
+ for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT;
+ i++, tmp_rx++) {
+ tmp_rx->rdes0 = cpu_to_le32(0);
+ tmp_rx->rdes1 = cpu_to_le32(0x01000600);
+ tmp_rx_dma += sizeof(struct rx_desc);
+ tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
+ tmp_rx->next_rx_desc = tmp_rx + 1;
+ }
+ (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
+ tmp_rx->next_rx_desc = db->first_rx_desc;
+
+ /* pre-allocate Rx buffer */
+ allocate_rx_buffer(db);
+}
+
+/*
+ * Update CR6 value
+ * Firstly stop ULI526X, then written value and start
+ */
+
+static void update_cr6(u32 cr6_data, unsigned long ioaddr)
+{
+
+ outl(cr6_data, ioaddr + DCR6);
+ udelay(5);
+}
+
+/*
+ * Allocate rx buffer,
+ */
+
+static void allocate_rx_buffer(struct uli526x_board_info *db)
+{
+ int index;
+ struct rx_desc *rxptr;
+ rxptr = db->first_rx_desc;
+ u32 addr;
+
+ for (index = 0; index < RX_DESC_CNT; index++) {
+ addr = (u32)NetRxPackets[index];
+ addr += (16 - (addr & 15));
+ rxptr->rx_buf_ptr = (char *) addr;
+ rxptr->rdes2 = cpu_to_le32(addr);
+ rxptr->rdes0 = cpu_to_le32(0x80000000);
+#ifdef DEBUG
+ printf("%s(): Number 0x%x:\n", __FUNCTION__, index);
+ printf("%s(): addr 0x%x:\n", __FUNCTION__, addr);
+ printf("%s(): rxptr address = 0x%x\n", __FUNCTION__, rxptr);
+ printf("%s(): rxptr buf address = 0x%x\n", \
+ __FUNCTION__, rxptr->rx_buf_ptr);
+ printf("%s(): rdes2 = 0x%x\n", __FUNCTION__, rxptr->rdes2);
+#endif
+ rxptr = rxptr->next_rx_desc;
+ }
+}
+
+/*
+ * Read one word data from the serial ROM
+ */
+
+static u16 read_srom_word(long ioaddr, int offset)
+{
+ int i;
+ u16 srom_data = 0;
+ long cr9_ioaddr = ioaddr + DCR9;
+
+ outl(CR9_SROM_READ, cr9_ioaddr);
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+ /* Send the Read Command 110b */
+ SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+ SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+ SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
+
+ /* Send the offset */
+ for (i = 5; i >= 0; i--) {
+ srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
+ SROM_CLK_WRITE(srom_data, cr9_ioaddr);
+ }
+
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+ for (i = 16; i > 0; i--) {
+ outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
+ udelay(5);
+ srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT)
+ ? 1 : 0);
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+ udelay(5);
+ }
+
+ outl(CR9_SROM_READ, cr9_ioaddr);
+ return srom_data;
+}
+
+/*
+ * Set 10/100 phyxcer capability
+ * AUTO mode : phyxcer register4 is NIC capability
+ * Force mode: phyxcer register4 is the force media
+ */
+
+static void uli526x_set_phyxcer(struct uli526x_board_info *db)
+{
+ u16 phy_reg;
+
+ /* Phyxcer capability setting */
+ phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
+
+ if (db->media_mode & ULI526X_AUTO) {
+ /* AUTO Mode */
+ phy_reg |= db->PHY_reg4;
+ } else {
+ /* Force Mode */
+ switch (db->media_mode) {
+ case ULI526X_10MHF: phy_reg |= 0x20; break;
+ case ULI526X_10MFD: phy_reg |= 0x40; break;
+ case ULI526X_100MHF: phy_reg |= 0x80; break;
+ case ULI526X_100MFD: phy_reg |= 0x100; break;
+ }
+
+ }
+
+ /* Write new capability to Phyxcer Reg4 */
+ if (!(phy_reg & 0x01e0)) {
+ phy_reg |= db->PHY_reg4;
+ db->media_mode |= ULI526X_AUTO;
+ }
+ phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
+
+ /* Restart Auto-Negotiation */
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
+ udelay(50);
+}
+
+/*
+ * Write a word to Phy register
+ */
+
+static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
+ u16 phy_data, u32 chip_id)
+{
+ u16 i;
+ unsigned long ioaddr;
+
+ if (chip_id == PCI_ULI5263_ID) {
+ phy_writeby_cr10(iobase, phy_addr, offset, phy_data);
+ return;
+ }
+ /* M5261/M5263 Chip */
+ ioaddr = iobase + DCR9;
+
+ /* Send 33 synchronization clock to Phy controller */
+ for (i = 0; i < 35; i++)
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send start command(01) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send write command(01) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send Phy address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, phy_addr & i ?
+ PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* Send register address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, offset & i ?
+ PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* written trasnition */
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+
+ /* Write a word data to PHY controller */
+ for (i = 0x8000; i > 0; i >>= 1)
+ phy_write_1bit(ioaddr, phy_data & i ?
+ PHY_DATA_1 : PHY_DATA_0, chip_id);
+}
+
+/*
+ * Read a word data from phy register
+ */
+
+static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
+{
+ int i;
+ u16 phy_data;
+ unsigned long ioaddr;
+
+ if (chip_id == PCI_ULI5263_ID)
+ return phy_readby_cr10(iobase, phy_addr, offset);
+ /* M5261/M5263 Chip */
+ ioaddr = iobase + DCR9;
+
+ /* Send 33 synchronization clock to Phy controller */
+ for (i = 0; i < 35; i++)
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send start command(01) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send read command(10) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+
+ /* Send Phy address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, phy_addr & i ?
+ PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* Send register address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, offset & i ?
+ PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* Skip transition state */
+ phy_read_1bit(ioaddr, chip_id);
+
+ /* read 16bit data */
+ for (phy_data = 0, i = 0; i < 16; i++) {
+ phy_data <<= 1;
+ phy_data |= phy_read_1bit(ioaddr, chip_id);
+ }
+
+ return phy_data;
+}
+
+static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset)
+{
+ unsigned long ioaddr, cr10_value;
+
+ ioaddr = iobase + DCR10;
+ cr10_value = phy_addr;
+ cr10_value = (cr10_value<<5) + offset;
+ cr10_value = (cr10_value<<16) + 0x08000000;
+ outl(cr10_value, ioaddr);
+ udelay(1);
+ while (1) {
+ cr10_value = inl(ioaddr);
+ if (cr10_value & 0x10000000)
+ break;
+ }
+ return (cr10_value&0x0ffff);
+}
+
+static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr,
+ u8 offset, u16 phy_data)
+{
+ unsigned long ioaddr, cr10_value;
+
+ ioaddr = iobase + DCR10;
+ cr10_value = phy_addr;
+ cr10_value = (cr10_value<<5) + offset;
+ cr10_value = (cr10_value<<16) + 0x04000000 + phy_data;
+ outl(cr10_value, ioaddr);
+ udelay(1);
+}
+/*
+ * Write one bit data to Phy Controller
+ */
+
+static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id)
+{
+ outl(phy_data , ioaddr); /* MII Clock Low */
+ udelay(1);
+ outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */
+ udelay(1);
+ outl(phy_data , ioaddr); /* MII Clock Low */
+ udelay(1);
+}
+
+/*
+ * Read one bit phy data from PHY controller
+ */
+
+static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
+{
+ u16 phy_data;
+
+ outl(0x50000 , ioaddr);
+ udelay(1);
+ phy_data = (inl(ioaddr) >> 19) & 0x1;
+ outl(0x40000 , ioaddr);
+ udelay(1);
+
+ return phy_data;
+}
+
+/*
+ * Set MAC address to ID Table
+ */
+
+static void set_mac_addr(struct eth_device *dev)
+{
+ int i;
+ u16 addr;
+ struct uli526x_board_info *db = dev->priv;
+ outl(0x10000, db->ioaddr + DCR0); /* Diagnosis mode */
+ /* Reset dianostic pointer port */
+ outl(0x1c0, db->ioaddr + DCR13);
+ outl(0, db->ioaddr + DCR14); /* Clear reset port */
+ outl(0x10, db->ioaddr + DCR14); /* Reset ID Table pointer */
+ outl(0, db->ioaddr + DCR14); /* Clear reset port */
+ outl(0, db->ioaddr + DCR13); /* Clear CR13 */
+ /* Select ID Table access port */
+ outl(0x1b0, db->ioaddr + DCR13);
+ /* Read MAC address from CR14 */
+ for (i = 0; i < 3; i++) {
+ addr = dev->enetaddr[2 * i] | (dev->enetaddr[2 * i + 1] << 8);
+ outl(addr, db->ioaddr + DCR14);
+ }
+ /* write end */
+ outl(0, db->ioaddr + DCR13); /* Clear CR13 */
+ outl(0, db->ioaddr + DCR0); /* Clear CR0 */
+ udelay(10);
+ return;
+}
+#endif
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
index cd4d5dc..1e060f7 100644
--- a/include/asm-mips/io.h
+++ b/include/asm-mips/io.h
@@ -71,7 +71,21 @@
* instruction, so the lower 16 bits must be zero. Should be true on
* on any sane architecture; generic code does not use this assumption.
*/
-extern unsigned long mips_io_port_base;
+extern const unsigned long mips_io_port_base;
+
+/*
+ * Gcc will generate code to load the value of mips_io_port_base after each
+ * function call which may be fairly wasteful in some cases. So we don't
+ * play quite by the book. We tell gcc mips_io_port_base is a long variable
+ * which solves the code generation issue. Now we need to violate the
+ * aliasing rules a little to make initialization possible and finally we
+ * will need the barrier() to fight side effects of the aliasing chat.
+ * This trickery will eventually collapse under gcc's optimizer. Oh well.
+ */
+static inline void set_io_port_base(unsigned long base)
+{
+ * (unsigned long *) &mips_io_port_base = base;
+}
/*
* Thanks to James van Artsdalen for a better timing-fix than
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index f580cca..13e2a2c 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -198,6 +198,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */
#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */
#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */
+#define CFG_PIXIS_VBOOT_MASK 0x40 /* Reset altbank mask*/
/* define to use L1 as initial stack */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index aa6dbc4..6f87240 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -201,6 +201,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */
#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */
#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */
+#define CFG_PIXIS_VBOOT_MASK 0x40 /* Reset altbank mask*/
#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 00c34d5..52deab4 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -432,7 +432,7 @@
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO15 */ \
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4) */ \
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMCTxD(5) */ \
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMCTxD(6) */ \
@@ -473,7 +473,7 @@
{GPIO1_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO53 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 Unselect via TraceSelect Bit */ \
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \
diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h
index 814082c..40a05fa 100644
--- a/include/configs/rsdproto.h
+++ b/include/configs/rsdproto.h
@@ -92,8 +92,8 @@
/* enable I2C */
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_SPEED 50000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x30
/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
diff --git a/include/miiphy.h b/include/miiphy.h
index 71716b0..5518a0a 100644
--- a/include/miiphy.h
+++ b/include/miiphy.h
@@ -26,56 +26,49 @@
|
| Author: Mark Wisner
|
-| Change Activity-
-|
-| Date Description of Change BY
-| --------- --------------------- ---
-| 04-May-99 Created MKW
-| 07-Jul-99 Added full duplex support MKW
-| 08-Sep-01 Tweaks gvb
-|
+----------------------------------------------------------------------------*/
#ifndef _miiphy_h_
#define _miiphy_h_
#include <net.h>
-int miiphy_read(char *devname, unsigned char addr, unsigned char reg,
- unsigned short *value);
-int miiphy_write(char *devname, unsigned char addr, unsigned char reg,
- unsigned short value);
-int miiphy_info(char *devname, unsigned char addr, unsigned int *oui,
- unsigned char *model, unsigned char *rev);
-int miiphy_reset(char *devname, unsigned char addr);
-int miiphy_speed(char *devname, unsigned char addr);
-int miiphy_duplex(char *devname, unsigned char addr);
+int miiphy_read (char *devname, unsigned char addr, unsigned char reg,
+ unsigned short *value);
+int miiphy_write (char *devname, unsigned char addr, unsigned char reg,
+ unsigned short value);
+int miiphy_info (char *devname, unsigned char addr, unsigned int *oui,
+ unsigned char *model, unsigned char *rev);
+int miiphy_reset (char *devname, unsigned char addr);
+int miiphy_speed (char *devname, unsigned char addr);
+int miiphy_duplex (char *devname, unsigned char addr);
+int miiphy_is_1000base_x (char *devname, unsigned char addr);
#ifdef CFG_FAULT_ECHO_LINK_DOWN
-int miiphy_link(char *devname, unsigned char addr);
+int miiphy_link (char *devname, unsigned char addr);
#endif
-void miiphy_init(void);
+void miiphy_init (void);
-void miiphy_register(char *devname,
- int (* read)(char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value),
- int (* write)(char *devname, unsigned char addr,
- unsigned char reg, unsigned short value));
+void miiphy_register (char *devname,
+ int (*read) (char *devname, unsigned char addr,
+ unsigned char reg, unsigned short *value),
+ int (*write) (char *devname, unsigned char addr,
+ unsigned char reg, unsigned short value));
-int miiphy_set_current_dev(char *devname);
-char *miiphy_get_current_dev(void);
+int miiphy_set_current_dev (char *devname);
+char *miiphy_get_current_dev (void);
-void miiphy_listdev(void);
+void miiphy_listdev (void);
#define BB_MII_DEVNAME "bbmii"
int bb_miiphy_read (char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value);
+ unsigned char reg, unsigned short *value);
int bb_miiphy_write (char *devname, unsigned char addr,
- unsigned char reg, unsigned short value);
+ unsigned char reg, unsigned short value);
/* phy seed setup */
#define AUTO 99
-#define _1000BASET 1000
+#define _1000BASET 1000
#define _100BASET 100
#define _10BASET 10
#define HALF 22
@@ -90,9 +83,10 @@ int bb_miiphy_write (char *devname, unsigned char addr,
#define PHY_ANLPAR 0x05
#define PHY_ANER 0x06
#define PHY_ANNPTR 0x07
-#define PHY_ANLPNP 0x08
-#define PHY_1000BTCR 0x09
-#define PHY_1000BTSR 0x0A
+#define PHY_ANLPNP 0x08
+#define PHY_1000BTCR 0x09
+#define PHY_1000BTSR 0x0A
+#define PHY_EXSR 0x0F
#define PHY_PHYSTS 0x10
#define PHY_MIPSCR 0x11
#define PHY_MIPGSR 0x12
@@ -115,10 +109,10 @@ int bb_miiphy_write (char *devname, unsigned char addr,
#define PHY_BMCR_DPLX 0x0100
#define PHY_BMCR_COL_TST 0x0080
-#define PHY_BMCR_SPEED_MASK 0x2040
-#define PHY_BMCR_1000_MBPS 0x0040
-#define PHY_BMCR_100_MBPS 0x2000
-#define PHY_BMCR_10_MBPS 0x0000
+#define PHY_BMCR_SPEED_MASK 0x2040
+#define PHY_BMCR_1000_MBPS 0x0040
+#define PHY_BMCR_100_MBPS 0x2000
+#define PHY_BMCR_10_MBPS 0x0000
/* phy BMSR */
#define PHY_BMSR_100T4 0x8000
@@ -126,6 +120,7 @@ int bb_miiphy_write (char *devname, unsigned char addr,
#define PHY_BMSR_100TXH 0x2000
#define PHY_BMSR_10TF 0x1000
#define PHY_BMSR_10TH 0x0800
+#define PHY_BMSR_EXT_STAT 0x0100
#define PHY_BMSR_PRE_SUP 0x0040
#define PHY_BMSR_AUTN_COMP 0x0020
#define PHY_BMSR_RF 0x0010
@@ -138,23 +133,42 @@ int bb_miiphy_write (char *devname, unsigned char addr,
#define PHY_ANLPAR_NP 0x8000
#define PHY_ANLPAR_ACK 0x4000
#define PHY_ANLPAR_RF 0x2000
+#define PHY_ANLPAR_ASYMP 0x0800
+#define PHY_ANLPAR_PAUSE 0x0400
#define PHY_ANLPAR_T4 0x0200
#define PHY_ANLPAR_TXFD 0x0100
#define PHY_ANLPAR_TX 0x0080
#define PHY_ANLPAR_10FD 0x0040
#define PHY_ANLPAR_10 0x0020
-#define PHY_ANLPAR_100 0x0380 /* we can run at 100 */
-
-#define PHY_ANLPAR_PSB_MASK 0x001f
-#define PHY_ANLPAR_PSB_802_3 0x0001
-#define PHY_ANLPAR_PSB_802_9 0x0002
-
-/* PHY_1000BTSR */
-#define PHY_1000BTSR_MSCF 0x8000
-#define PHY_1000BTSR_MSCR 0x4000
-#define PHY_1000BTSR_LRS 0x2000
-#define PHY_1000BTSR_RRS 0x1000
-#define PHY_1000BTSR_1000FD 0x0800
-#define PHY_1000BTSR_1000HD 0x0400
+#define PHY_ANLPAR_100 0x0380 /* we can run at 100 */
+/* phy ANLPAR 1000BASE-X */
+#define PHY_X_ANLPAR_NP 0x8000
+#define PHY_X_ANLPAR_ACK 0x4000
+#define PHY_X_ANLPAR_RF_MASK 0x3000
+#define PHY_X_ANLPAR_PAUSE_MASK 0x0180
+#define PHY_X_ANLPAR_HD 0x0040
+#define PHY_X_ANLPAR_FD 0x0020
+
+#define PHY_ANLPAR_PSB_MASK 0x001f
+#define PHY_ANLPAR_PSB_802_3 0x0001
+#define PHY_ANLPAR_PSB_802_9 0x0002
+
+/* phy 1000BTCR */
+#define PHY_1000BTCR_1000FD 0x0200
+#define PHY_1000BTCR_1000HD 0x0100
+
+/* phy 1000BTSR */
+#define PHY_1000BTSR_MSCF 0x8000
+#define PHY_1000BTSR_MSCR 0x4000
+#define PHY_1000BTSR_LRS 0x2000
+#define PHY_1000BTSR_RRS 0x1000
+#define PHY_1000BTSR_1000FD 0x0800
+#define PHY_1000BTSR_1000HD 0x0400
+
+/* phy EXSR */
+#define PHY_EXSR_1000XF 0x8000
+#define PHY_EXSR_1000XH 0x4000
+#define PHY_EXSR_1000TF 0x2000
+#define PHY_EXSR_1000TH 0x1000
#endif
diff --git a/lib_mips/board.c b/lib_mips/board.c
index 91ccec0..c1a0acf 100644
--- a/lib_mips/board.c
+++ b/lib_mips/board.c
@@ -62,6 +62,11 @@ static ulong mem_malloc_start;
static ulong mem_malloc_end;
static ulong mem_malloc_brk;
+/*
+ * mips_io_port_base is the begin of the address space to which x86 style
+ * I/O ports are mapped.
+ */
+unsigned long mips_io_port_base = -1;
/*
* The Malloc area is immediately below the monitor copy in DRAM
diff --git a/net/eth.c b/net/eth.c
index e7f1220..1b56a35 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -54,6 +54,7 @@ extern int rtl8169_initialize(bd_t*);
extern int scc_initialize(bd_t*);
extern int skge_initialize(bd_t*);
extern int tsi108_eth_initialize(bd_t*);
+extern int uli526x_initialize(bd_t *);
extern int tsec_initialize(bd_t*, int, char *);
extern int npe_initialize(bd_t *);
extern int uec_initialize(int);
@@ -238,6 +239,9 @@ int eth_initialize(bd_t *bis)
#if defined(CONFIG_TSI108_ETH)
tsi108_eth_initialize(bis);
#endif
+#if defined(CONFIG_ULI526X)
+ uli526x_initialize(bis);
+#endif
#if defined(CONFIG_RTL8139)
rtl8139_initialize(bis);
#endif
generated by cgit v1.1 at 2024-11-17 09:24:24 +0000