diff options
| -rw-r--r-- | MAINTAINERS | 1 | ||||
| -rwxr-xr-x | MAKEALL | 1 | ||||
| -rw-r--r-- | Makefile | 5 | ||||
| -rw-r--r-- | board/xilinx/xupv2p/Makefile | 50 | ||||
| -rw-r--r-- | board/xilinx/xupv2p/config.mk | 32 | ||||
| -rw-r--r-- | board/xilinx/xupv2p/u-boot.lds | 68 | ||||
| -rw-r--r-- | board/xilinx/xupv2p/xparameters.h | 58 | ||||
| -rw-r--r-- | board/xilinx/xupv2p/xupv2p.c | 49 | ||||
| -rw-r--r-- | include/configs/xupv2p.h | 226 |
9 files changed, 0 insertions, 490 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 127604b..f048795 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -704,7 +704,6 @@ Yasushi Shoji <yashi@atmark-techno.com> Michal Simek <monstr@monstr.eu> ML401 MicroBlaze - XUPV2P MicroBlaze ######################################################################### # Coldfire Systems: # @@ -698,7 +698,6 @@ LIST_nios2=" \ LIST_microblaze=" \ ml401 \ suzaku \ - xupv2p \ " ######################################################################### @@ -3153,11 +3153,6 @@ suzaku_config: unconfig @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno -xupv2p_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx - #======================================================================== # Blackfin #======================================================================== diff --git a/board/xilinx/xupv2p/Makefile b/board/xilinx/xupv2p/Makefile deleted file mode 100644 index 10b47b2..0000000 --- a/board/xilinx/xupv2p/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS = $(BOARD).o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $^ - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/xilinx/xupv2p/config.mk b/board/xilinx/xupv2p/config.mk deleted file mode 100644 index c07b0b3..0000000 --- a/board/xilinx/xupv2p/config.mk +++ /dev/null @@ -1,32 +0,0 @@ -# -# (C) Copyright 2007 Michal Simek -# -# Michal SIMEK <monstr@monstr.eu> -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# CAUTION: This file is automatically generated by libgen. -# Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4 -# - -TEXT_BASE = 0x38000000 - -PLATFORM_CPPFLAGS += -mno-xl-soft-mul -PLATFORM_CPPFLAGS += -mno-xl-soft-div -PLATFORM_CPPFLAGS += -mxl-barrel-shift diff --git a/board/xilinx/xupv2p/u-boot.lds b/board/xilinx/xupv2p/u-boot.lds deleted file mode 100644 index b38f648..0000000 --- a/board/xilinx/xupv2p/u-boot.lds +++ /dev/null @@ -1,68 +0,0 @@ -/* - * (C) Copyright 2004 Atmark Techno, Inc. - * - * Yasushi SHOJI <yashi@atmark-techno.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(microblaze) -ENTRY(_start) - -SECTIONS -{ - .text ALIGN(0x4): - { - __text_start = .; - cpu/microblaze/start.o (.text) - *(.text) - __text_end = .; - } - - .rodata ALIGN(0x4): - { - __rodata_start = .; - *(.rodata) - __rodata_end = .; - } - - .data ALIGN(0x4): - { - __data_start = .; - *(.data) - __data_end = .; - } - - .u_boot_cmd ALIGN(0x4): - { - . = .; - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; - } - - .bss ALIGN(0x4): - { - __bss_start = .; - *(.bss) - . = ALIGN(4); - __bss_end = .; - } - __end = . ; -} diff --git a/board/xilinx/xupv2p/xparameters.h b/board/xilinx/xupv2p/xparameters.h deleted file mode 100644 index 9e5ebda..0000000 --- a/board/xilinx/xupv2p/xparameters.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK <monstr@monstr.eu> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * CAUTION: This file is automatically generated by libgen. - * Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4 - */ - -/* System Clock Frequency */ -#define XILINX_CLOCK_FREQ 100000000 - -/* Interrupt controller is opb_intc_0 */ -#define XILINX_INTC_BASEADDR 0x41200000 -#define XILINX_INTC_NUM_INTR_INPUTS 11 - -/* Timer pheriphery is opb_timer_1 */ -#define XILINX_TIMER_BASEADDR 0x41c00000 -#define XILINX_TIMER_IRQ 1 - -/* Uart pheriphery is RS232_Uart_1 */ -#define XILINX_UARTLITE_BASEADDR 0x40600000 -#define XILINX_UARTLITE_BAUDRATE 115200 - -/* GPIO is LEDs_4Bit*/ -#define XILINX_GPIO_BASEADDR 0x40000000 - -/* FLASH doesn't exist none */ - -/* Main Memory is DDR_256MB_32MX64_rank1_row13_col10_cl2_5 */ -#define XILINX_RAM_START 0x30000000 -#define XILINX_RAM_SIZE 0x10000000 - -/* Sysace Controller is SysACE_CompactFlash */ -#define XILINX_SYSACE_BASEADDR 0x41800000 -#define XILINX_SYSACE_HIGHADDR 0x4180ffff -#define XILINX_SYSACE_MEM_WIDTH 16 - -/* Ethernet controller is Ethernet_MAC */ -#define XILINX_EMACLITE_BASEADDR 0x40C00000 diff --git a/board/xilinx/xupv2p/xupv2p.c b/board/xilinx/xupv2p/xupv2p.c deleted file mode 100644 index b1a76c0..0000000 --- a/board/xilinx/xupv2p/xupv2p.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK <monstr@monstr.eu> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* This is a board specific file. It's OK to include board specific - * header files */ - -#include <common.h> -#include <config.h> - -void do_reset (void) -{ -#ifdef CONFIG_SYS_GPIO_0 - *((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) = - ++(*((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR))); -#endif -#ifdef CONFIG_SYS_RESET_ADDRESS - puts ("Reseting board\n"); - asm ("bra r0"); -#endif -} - -int gpio_init (void) -{ -#ifdef CONFIG_SYS_GPIO_0 - *((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) = 0x0; -#endif - return 0; -} diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h deleted file mode 100644 index ed844bf..0000000 --- a/include/configs/xupv2p.h +++ /dev/null @@ -1,226 +0,0 @@ -/* - * (C) Copyright 2007-2008 Michal Simek - * - * Michal SIMEK <monstr@monstr.eu> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "../board/xilinx/xupv2p/xparameters.h" - -#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ -#define CONFIG_XUPV2P 1 - -/* uart */ -#ifdef XILINX_UARTLITE_BASEADDR -#define CONFIG_XILINX_UARTLITE -#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR -#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE -#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } -#else -#ifdef XILINX_UART16550_BASEADDR -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 4 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 XILINX_UART16550_BASEADDR -#define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 115200 } -#endif -#endif - -/* - * setting reset address - * - * TEXT_BASE is set to place, where the U-BOOT run in RAM, but - * if you want to store U-BOOT in flash, set CONFIG_SYS_RESET_ADDRESS - * to FLASH memory and after loading bitstream jump to FLASH. - * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze - * jump to CONFIG_SYS_RESET_ADDRESS where is the original U-BOOT code. - */ -/* #define CONFIG_SYS_RESET_ADDRESS 0x36000000 */ - -/* ethernet */ -#ifdef XILINX_EMAC_BASEADDR -#define CONFIG_XILINX_EMAC 1 -#define CONFIG_SYS_ENET -#else -#ifdef XILINX_EMACLITE_BASEADDR -#define CONFIG_XILINX_EMACLITE 1 -#define CONFIG_SYS_ENET -#endif -#endif -#undef ET_DEBUG - -/* gpio */ -#ifdef XILINX_GPIO_BASEADDR -#define CONFIG_SYS_GPIO_0 1 -#define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR -#endif - -/* interrupt controller */ -#ifdef XILINX_INTC_BASEADDR -#define CONFIG_SYS_INTC_0 1 -#define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR -#define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS -#endif - -/* timer */ -#ifdef XILINX_TIMER_BASEADDR -#if (XILINX_TIMER_IRQ != -1) -#define CONFIG_SYS_TIMER_0 1 -#define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR -#define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ -#define FREQUENCE XILINX_CLOCK_FREQ -#define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 ) -#endif -#else -#ifdef XILINX_CLOCK_FREQ -#define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ -#else -#error BAD CLOCK FREQ -#endif -#endif -/* - * memory layout - Example - * TEXT_BASE = 0x3600_0000; - * CONFIG_SYS_SRAM_BASE = 0x3000_0000; - * CONFIG_SYS_SRAM_SIZE = 0x1000_0000; - * - * CONFIG_SYS_GBL_DATA_OFFSET = 0x3000_0000 + 0x1000_0000 - 0x1000 = 0x3FFF_F000 - * CONFIG_SYS_MONITOR_BASE = 0x3FFF_F000 - 0x40000 = 0x3FFB_F000 - * CONFIG_SYS_MALLOC_BASE = 0x3FFB_F000 - 0x40000 = 0x3FF7_F000 - * - * 0x3000_0000 CONFIG_SYS_SDRAM_BASE - * FREE - * 0x3600_0000 TEXT_BASE - * U-BOOT code - * 0x3602_0000 - * FREE - * - * STACK - * 0x3FF7_F000 CONFIG_SYS_MALLOC_BASE - * MALLOC_AREA 256kB Alloc - * 0x3FFB_F000 CONFIG_SYS_MONITOR_BASE - * MONITOR_CODE 256kB Env - * 0x3FFF_F000 CONFIG_SYS_GBL_DATA_OFFSET - * GLOBAL_DATA 4kB bd, gd - * 0x4000_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - */ - -/* ddr sdram - main memory */ -#define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START -#define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) - -/* global pointer */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x1000 /* size of global data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* start of global data */ - -/* monitor code */ -#define SIZE 0x40000 -#define CONFIG_SYS_MONITOR_LEN SIZE -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_MONITOR_END (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_MALLOC_LEN SIZE -#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) - -/* stack */ -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MALLOC_BASE - -#define CONFIG_SYS_NO_FLASH 1 -#define CONFIG_ENV_IS_NOWHERE 1 -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_IMLS - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_IRQ - -#ifndef CONFIG_SYS_ENET - #undef CONFIG_CMD_NET -#else - #define CONFIG_CMD_PING -#endif - -#ifdef XILINX_SYSACE_BASEADDR -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#endif - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_PROMPT "U-Boot-mONStR> " -#define CONFIG_SYS_CBSIZE 512 /* size of console buffer */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */ -#define CONFIG_SYS_MAXARGS 15 /* max number of command args */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_LOAD_ADDR 0x12000000 /* default load address */ - -#define CONFIG_BOOTDELAY 30 -#define CONFIG_BOOTARGS "root=romfs" -#define CONFIG_HOSTNAME "xupv2p" -#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" -#define CONFIG_IPADDR 192.168.0.3 -#define CONFIG_SERVERIP 192.168.0.5 -#define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD - -/* architecture dependent code */ -#define CONFIG_SYS_USR_EXCEP /* user exception */ -#define CONFIG_SYS_HZ 1000 - -#define CONFIG_PREBOOT "echo U-BOOT by mONStR;" \ - "base 0;" \ - "echo" - -/* system ace */ -#ifdef XILINX_SYSACE_BASEADDR -#define CONFIG_SYSTEMACE -/* #define DEBUG_SYSTEMACE */ -#define SYSTEMACE_CONFIG_FPGA -#define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR -#define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH -#define CONFIG_DOS_PARTITION -#endif - -#define CONFIG_CMDLINE_EDITING - -#endif /* __CONFIG_H */ |