diff options
39 files changed, 4926 insertions, 452 deletions
diff --git a/CHANGELOG-before-U-Boot-1.1.5 b/CHANGELOG-before-U-Boot-1.1.5 index 727a7b6..2404148 100644 --- a/CHANGELOG-before-U-Boot-1.1.5 +++ b/CHANGELOG-before-U-Boot-1.1.5 @@ -438,6 +438,20 @@ Changes for U-Boot 1.1.5: * Call serial_initialize() before first debug() is used. +* Code cleanup + +* Various USB related patches + - Add support for mpc8xx USB device. + - Add support for Common Device Class - Abstract Control Model USB console. + - Add support for flow control in USB slave devices. + - Add support for switching between gserial and cdc_acm using environment. + - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h + - Update usbcore slightly to ease host enumeration. + - Fix non-portable endian problems in usbdcore and usbdcore_ep0. + - Add AdderUSB_config as a defconfig to enable usage of the USB console + by default with the Adder87x U-Boot port. + Patch by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006 + * Cleanup trab board for GCC-4.x * VoiceBlue update: use new MTD flash partitioning methods, use more @@ -122,7 +122,7 @@ ifeq ($(HOSTARCH),$(ARCH)) CROSS_COMPILE = else ifeq ($(ARCH),ppc) -CROSS_COMPILE = powerpc-linux- +CROSS_COMPILE = ppc_8xx- endif ifeq ($(ARCH),arm) CROSS_COMPILE = arm-linux- @@ -644,6 +644,9 @@ AdderII_config \ @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) @$(MKCONFIG) -a Adder ppc mpc8xx adder +AdderUSB_config: unconfig + @./mkconfig -a AdderUSB ppc mpc8xx adder + ADS860_config \ FADS823_config \ FADS850SAR_config \ @@ -249,6 +249,7 @@ The following options need to be configured: CONFIG_SA1110 CONFIG_ARM7 CONFIG_PXA250 + CONFIG_PXA27X CONFIG_CPU_MONAHANS MicroBlaze based CPUs: @@ -901,6 +902,68 @@ The following options need to be configured: for differential drivers: 0x00001000 for single ended drivers: 0x00005000 +- USB Device: + Define the below if you wish to use the USB console. + Once firmware is rebuilt from a serial console issue the + command "setenv stdin usbtty; setenv stdout usbtty" and + attach your usb cable. The Unix command "dmesg" should print + it has found a new device. The environment variable usbtty + can be set to gserial or cdc_acm to enable your device to + appear to a USB host as a Linux gserial device or a + Common Device Class Abstract Control Model serial device. + If you select usbtty = gserial you should be able to enumerate + a Linux host by + # modprobe usbserial vendor=0xVendorID product=0xProductID + else if using cdc_acm, simply setting the environment + variable usbtty to be cdc_acm should suffice. The following + might be defined in YourBoardName.h + + CONFIG_USB_DEVICE + Define this to build a UDC device + + CONFIG_USB_TTY + Define this to have a tty type of device available to + talk to the UDC device + + CFG_CONSOLE_IS_IN_ENV + Define this if you want stdin, stdout &/or stderr to + be set to usbtty. + + mpc8xx: + CFG_USB_EXTC_CLK 0xBLAH + Derive USB clock from external clock "blah" + - CFG_USB_EXTC_CLK 0x02 + + CFG_USB_BRG_CLK 0xBLAH + Derive USB clock from brgclk + - CFG_USB_BRG_CLK 0x04 + + If you have a USB-IF assigned VendorID then you may wish to + define your own vendor specific values either in BoardName.h + or directly in usbd_vendor_info.h. If you don't define + CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME, + CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot + should pretend to be a Linux device to it's target host. + + CONFIG_USBD_MANUFACTURER + Define this string as the name of your company for + - CONFIG_USBD_MANUFACTURER "my company" + + CONFIG_USBD_PRODUCT_NAME + Define this string as the name of your product + - CONFIG_USBD_PRODUCT_NAME "acme usb device" + + CONFIG_USBD_VENDORID + Define this as your assigned Vendor ID from the USB + Implementors Forum. This *must* be a genuine Vendor ID + to avoid polluting the USB namespace. + - CONFIG_USBD_VENDORID 0xFFFF + + CONFIG_USBD_PRODUCTID + Define this as the unique Product ID + for your device + - CONFIG_USBD_PRODUCTID 0xFFFF + - MMC Support: The MMC controller on the Intel PXA is supported. To diff --git a/board/delta/delta.c b/board/delta/delta.c index b127ac8..6e22774 100644 --- a/board/delta/delta.c +++ b/board/delta/delta.c @@ -1,10 +1,6 @@ /* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> + * (C) Copyright 2006 + * DENX Software Engineering * * See file CREDITS for list of people who contributed to this * project. @@ -98,7 +94,6 @@ int board_late_init(void) return 0; } - /* * Magic Key Handling, mainly copied from board/lwmon/lwmon.c */ @@ -324,6 +319,12 @@ static void init_DA9030() return; } + val = 0x80; + if(i2c_write(addr, IRQ_MASK_B, 1, &val, 1)) { + printf("Error accessing DA9030 via i2c.\n"); + return; + } + i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */ i2c_reg_write(addr, LDO2_3, 0xd1); /* LDO2 =1,9V, LDO3=3,1V */ i2c_reg_write(addr, LDO4_5, 0xcc); /* LDO2 =1,9V, LDO3=3,1V */ diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c index f4074ae..6f903d2 100644 --- a/board/trab/auto_update.c +++ b/board/trab/auto_update.c @@ -34,7 +34,7 @@ #ifdef CONFIG_AUTO_UPDATE -#ifndef CONFIG_USB_OHCI +#ifndef CONFIG_USB_OHCI_NEW #error "must define CONFIG_USB_OHCI" #endif diff --git a/cpu/arm920t/at91rm9200/Makefile b/cpu/arm920t/at91rm9200/Makefile index 8d4e478..eaabad2 100644 --- a/cpu/arm920t/at91rm9200/Makefile +++ b/cpu/arm920t/at91rm9200/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).a COBJS = bcm5221.o dm9161.o ether.o i2c.o interrupts.o \ - lxt972.o serial.o usb_ohci.o + lxt972.o serial.o usb.o SOBJS = lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/cpu/arm920t/at91rm9200/usb.c b/cpu/arm920t/at91rm9200/usb.c new file mode 100644 index 0000000..366262e --- /dev/null +++ b/cpu/arm920t/at91rm9200/usb.c @@ -0,0 +1,53 @@ +/* + * (C) Copyright 2006 + * DENX Software Engineering <mk@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) +# ifdef CONFIG_AT91RM9200 + +#include <asm/arch/hardware.h> + +int usb_cpu_init() +{ + /* Enable USB host clock. */ + *AT91C_PMC_SCER = AT91C_PMC_UHP; /* 48MHz clock enabled for UHP */ + *AT91C_PMC_PCER = 1 << AT91C_ID_UHP; /* Peripheral Clock Enable Register */ + return 0; +} + +int usb_cpu_stop() +{ + /* Initialization failed */ + *AT91C_PMC_PCDR = 1 << AT91C_ID_UHP; /* Peripheral Clock Disable Register */ + *AT91C_PMC_SCDR = AT91C_PMC_UHP; /* 48MHz clock disabled for UHP */ + return 0; +} + +int usb_cpu_init_fail() +{ + usb_cpu_stop(); +} + +# endif /* CONFIG_AT91RM9200 */ +#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */ diff --git a/cpu/arm920t/s3c24x0/Makefile b/cpu/arm920t/s3c24x0/Makefile index 3a7c4b3..0ff36c5 100644 --- a/cpu/arm920t/s3c24x0/Makefile +++ b/cpu/arm920t/s3c24x0/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).a COBJS = i2c.o interrupts.o serial.o speed.o \ - usb_ohci.o + usb.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/arm920t/s3c24x0/usb.c b/cpu/arm920t/s3c24x0/usb.c new file mode 100644 index 0000000..ef5d5bf --- /dev/null +++ b/cpu/arm920t/s3c24x0/usb.c @@ -0,0 +1,72 @@ +/* + * (C) Copyright 2006 + * DENX Software Engineering <mk@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) +# if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) + +#if defined(CONFIG_S3C2400) +# include <s3c2400.h> +#elif defined(CONFIG_S3C2410) +# include <s3c2410.h> +#endif + +int usb_cpu_init (void) +{ + + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + + /* + * Set the 48 MHz UPLL clocking. Values are taken from + * "PLL value selection guide", 6-23, s3c2400_UM.pdf. + */ + clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2); + gpio->MISCCR |= 0x8; /* 1 = use pads related USB for USB host */ + + /* + * Enable USB host clock. + */ + clk_power->CLKCON |= (1 << 4); + + return 0; +} + +int usb_cpu_stop (void) +{ + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); + /* may not want to do this */ + clk_power->CLKCON &= ~(1 << 4); + return 0; +} + +int usb_cpu_init_fail (void) +{ + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); + clk_power->CLKCON &= ~(1 << 4); + return 0; +} + +# endif /* defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) */ +#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */ diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile index 235adb7..312b0bf 100644 --- a/cpu/mpc5xxx/Makefile +++ b/cpu/mpc5xxx/Makefile @@ -28,7 +28,7 @@ LIB = $(obj)lib$(CPU).a START = start.o SOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o COBJS = i2c.o traps.o cpu.o cpu_init.o fec.o ide.o interrupts.o \ - loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o + loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile index 4068b53..66fd02c 100644 --- a/cpu/ppc4xx/Makefile +++ b/cpu/ppc4xx/Makefile @@ -27,12 +27,12 @@ LIB = $(obj)lib$(CPU).a START = start.o resetvec.o kgdb.o SOBJS = dcr.o -COBJS = 405gp_pci.o 4xx_enet.o \ +COBJS = 405gp_pci.o 440spe_pcie.o 4xx_enet.o \ bedbug_405.o commproc.o \ cpu.o cpu_init.o gpio.o i2c.o interrupts.o \ miiphy.o ndfc.o sdram.o serial.o \ 40x_spd_sdram.o 44x_spd_ddr.o 44x_spd_ddr2.o speed.o \ - tlb.o traps.o usb_ohci.o usbdev.o \ + tlb.o traps.o usb_ohci.o usbdev.o usb.o \ 440spe_pcie.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/cpu/pxa/Makefile b/cpu/pxa/Makefile index cded7ff..8b4367e 100644 --- a/cpu/pxa/Makefile +++ b/cpu/pxa/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o -COBJS = serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o +COBJS = serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o usb.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/pxa/usb.c b/cpu/pxa/usb.c new file mode 100644 index 0000000..65f457f --- /dev/null +++ b/cpu/pxa/usb.c @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2006 + * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) +# if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) + +#include <asm/arch/pxa-regs.h> + +int usb_cpu_init() +{ +#if defined(CONFIG_CPU_MONAHANS) + /* Enable USB host clock. */ + CKENA |= (CKENA_2_USBHOST | CKENA_20_UDC); + udelay(100); +#endif +#if defined(CONFIG_PXA27X) + /* Enable USB host clock. */ + CKEN |= CKEN10_USBHOST; +#endif + +#if defined(CONFIG_CPU_MONAHANS) + /* Configure Port 2 for Host (USB Client Registers) */ + UP2OCR = 0x3000c; +#endif + + UHCHR |= UHCHR_FHR; + wait_ms(11); + UHCHR &= ~UHCHR_FHR; + + UHCHR |= UHCHR_FSBIR; + while (UHCHR & UHCHR_FSBIR) + udelay(1); + +#if defined(CONFIG_CPU_MONAHANS) + UHCHR &= ~UHCHR_SSEP0; +#endif +#if defined(CONFIG_PXA27X) + UHCHR &= ~UHCHR_SSEP2; +#endif + UHCHR &= ~UHCHR_SSEP1; + UHCHR &= ~UHCHR_SSE; + + return 0; +} + +int usb_cpu_stop() +{ + return 0; +} + +int usb_cpu_init_fail() +{ + return 0; +} + +# endif /* defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) */ +#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */ diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci new file mode 100644 index 0000000..017c69a --- /dev/null +++ b/doc/README.generic_usb_ohci @@ -0,0 +1,43 @@ +Notes on the the generic USB-OHCI driver +======================================== + +This driver (drivers/usb_ohci.[ch]) is the result of the merge of +various existing OHCI drivers that were basically identical beside +cpu/board dependant initalization. This initalization has been moved +into cpu/board directories and are called via the hooks below. + +Configuration options +---------------------- + +CONFIG_USB_OHCI_NEW: enable the new OHCI driver + +CFG_USB_OHCI_BOARD_INIT: call the board dependant hooks: + + - extern int usb_board_init(void); + - extern int usb_board_stop(void); + - extern int usb_cpu_init_fail(void); + +CFG_USB_OHCI_CPU_INIT: call the cpu dependant hooks: + + - extern int usb_cpu_init(void); + - extern int usb_cpu_stop(void); + - extern int usb_cpu_init_fail(void); + +CFG_USB_OHCI_REGS_BASE: defines the base address of the OHCI registers + +CFG_USB_OHCI_SLOT_NAME: slot name + +CFG_USB_OHCI_MAX_ROOT_PORTS: maximal number of ports of the root hub. + + +Endianness issues +------------------ + +The LITTLEENDIAN #define determines if the 'swap_16' and 'swap_32' +macros do byte swapping or not. But some cpus OHCI-controllers such as +ppc4xx and mpc5xxx operate in little endian mode, so some extra ifdefs +were necessary to make this work. + + + + diff --git a/drivers/Makefile b/drivers/Makefile index d68cba6..b8dc97b 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -31,8 +31,8 @@ COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \ bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \ cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \ e1000.o eepro100.o \ - i8042.o inca-ip_sw.o keyboard.o \ - lan91c96.o macb.o \ + i8042.o inca-ip_sw.o isp116x-hcd.o keyboard.o \ + lan91c96.o macb.o\ natsemi.o ne2000.o netarm_eth.o netconsole.o \ ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \ omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o \ @@ -47,7 +47,9 @@ COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \ status_led.o sym53c8xx.o systemace.o ahci.o \ ti_pci1410a.o tigon3.o tsec.o \ tsi108_eth.o tsi108_i2c.o tsi108_pci.o \ - usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \ + usb_ohci.o \ + usbdcore.o usbdcore_ep0.o usbdcore_mpc8xx.o usbdcore_omap1510.o \ + usbtty.o \ videomodes.o w83c553f.o \ ks8695eth.o \ pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \ diff --git a/drivers/isp116x-hcd.c b/drivers/isp116x-hcd.c new file mode 100644 index 0000000..d57b8ec --- /dev/null +++ b/drivers/isp116x-hcd.c @@ -0,0 +1,1412 @@ +/* + * ISP116x HCD (Host Controller Driver) for u-boot. + * + * Copyright (C) 2006-2007 Rodolfo Giometti <giometti@linux.it> + * Copyright (C) 2006-2007 Eurotech S.p.A. <info@eurotech.it> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * + * Derived in part from the SL811 HCD driver "u-boot/drivers/sl811_usb.c" + * (original copyright message follows): + * + * (C) Copyright 2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This code is based on linux driver for sl811hs chip, source at + * drivers/usb/host/sl811.c: + * + * SL811 Host Controller Interface driver for USB. + * + * Copyright (c) 2003/06, Courage Co., Ltd. + * + * Based on: + * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap, + * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, + * Adam Richter, Gregory P. Smith; + * 2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com> + * 3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn> + * + * [[GNU/GPL disclaimer]] + * + * and in part from AU1x00 OHCI HCD driver "u-boot/cpu/mips/au1x00_usb_ohci.c" + * (original copyright message follows): + * + * URB OHCI HCD (Host Controller Driver) for USB on the AU1x00. + * + * (C) Copyright 2003 + * Gary Jennejohn, DENX Software Engineering <gj@denx.de> + * + * [[GNU/GPL disclaimer]] + * + * Note: Part of this code has been derived from linux + */ + +#include <common.h> + +#ifdef CONFIG_USB_ISP116X_HCD +#include <asm/io.h> +#include <usb.h> +#include <malloc.h> +#include <linux/list.h> + +/* + * ISP116x chips require certain delays between accesses to its + * registers. The following timing options exist. + * + * 1. Configure your memory controller (the best) + * 2. Use ndelay (easiest, poorest). For that, enable the following macro. + * + * Value is in microseconds. + */ +#ifdef ISP116X_HCD_USE_UDELAY +#define UDELAY 1 +#endif + +/* + * On some (slowly?) machines an extra delay after data packing into + * controller's FIFOs is required, * otherwise you may get the following + * error: + * + * uboot> usb start + * (Re)start USB... + * USB: scanning bus for devices... isp116x: isp116x_submit_job: CTL:TIMEOUT + * isp116x: isp116x_submit_job: ****** FIFO not ready! ****** + * + * USB device not responding, giving up (status=4) + * isp116x: isp116x_submit_job: ****** FIFO not empty! ****** + * isp116x: isp116x_submit_job: ****** FIFO not empty! ****** + * isp116x: isp116x_submit_job: ****** FIFO not empty! ****** + * 3 USB Device(s) found + * scanning bus for storage devices... 0 Storage Device(s) found + * + * Value is in milliseconds. + */ +#ifdef ISP116X_HCD_USE_EXTRA_DELAY +#define EXTRA_DELAY 2 +#endif + +/* + * Enable the following defines if you wish enable debugging messages. + */ +#undef DEBUG /* enable debugging messages */ +#undef TRACE /* enable tracing code */ +#undef VERBOSE /* verbose debugging messages */ + +#include "isp116x.h" + +#define DRIVER_VERSION "08 Jan 2007" +static const char hcd_name[] = "isp116x-hcd"; + +struct isp116x isp116x_dev; +struct isp116x_platform_data isp116x_board; +int got_rhsc = 0; /* root hub status change */ +struct usb_device *devgone; /* device which was disconnected */ +int rh_devnum = 0; /* address of Root Hub endpoint */ + +/* ------------------------------------------------------------------------- */ + +#define ALIGN(x,a) (((x)+(a)-1UL)&~((a)-1UL)) +#define min_t(type,x,y) \ + ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; }) + +/* ------------------------------------------------------------------------- */ + +static int isp116x_reset(struct isp116x *isp116x); + +/* --- Debugging functions ------------------------------------------------- */ + +#define isp116x_show_reg(d, r) { \ + if ((r) < 0x20) { \ + DBG("%-12s[%02x]: %08x", #r, \ + r, isp116x_read_reg32(d, r)); \ + } else { \ + DBG("%-12s[%02x]: %04x", #r, \ + r, isp116x_read_reg16(d, r)); \ + } \ +} + +#define isp116x_show_regs(d) { \ + isp116x_show_reg(d, HCREVISION); \ + isp116x_show_reg(d, HCCONTROL); \ + isp116x_show_reg(d, HCCMDSTAT); \ + isp116x_show_reg(d, HCINTSTAT); \ + isp116x_show_reg(d, HCINTENB); \ + isp116x_show_reg(d, HCFMINTVL); \ + isp116x_show_reg(d, HCFMREM); \ + isp116x_show_reg(d, HCFMNUM); \ + isp116x_show_reg(d, HCLSTHRESH); \ + isp116x_show_reg(d, HCRHDESCA); \ + isp116x_show_reg(d, HCRHDESCB); \ + isp116x_show_reg(d, HCRHSTATUS); \ + isp116x_show_reg(d, HCRHPORT1); \ + isp116x_show_reg(d, HCRHPORT2); \ + isp116x_show_reg(d, HCHWCFG); \ + isp116x_show_reg(d, HCDMACFG); \ + isp116x_show_reg(d, HCXFERCTR); \ + isp116x_show_reg(d, HCuPINT); \ + isp116x_show_reg(d, HCuPINTENB); \ + isp116x_show_reg(d, HCCHIPID); \ + isp116x_show_reg(d, HCSCRATCH); \ + isp116x_show_reg(d, HCITLBUFLEN); \ + isp116x_show_reg(d, HCATLBUFLEN); \ + isp116x_show_reg(d, HCBUFSTAT); \ + isp116x_show_reg(d, HCRDITL0LEN); \ + isp116x_show_reg(d, HCRDITL1LEN); \ +} + +#if defined(TRACE) + +static int isp116x_get_current_frame_number(struct usb_device *usb_dev) +{ + struct isp116x *isp116x = &isp116x_dev; + + return isp116x_read_reg32(isp116x, HCFMNUM); +} + +static void dump_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int len, char *str) +{ +#if defined(VERBOSE) + int i; +#endif + + DBG("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d stat:%#lx", + str, + isp116x_get_current_frame_number(dev), + usb_pipedevice(pipe), + usb_pipeendpoint(pipe), + usb_pipeout(pipe) ? 'O' : 'I', + usb_pipetype(pipe) < 2 ? + (usb_pipeint(pipe) ? + "INTR" : "ISOC") : + (usb_pipecontrol(pipe) ? "CTRL" : "BULK"), len, dev->status); +#if defined(VERBOSE) + if (len > 0 && buffer) { + printf(__FILE__ ": data(%d):", len); + for (i = 0; i < 16 && i < len; i++) + printf(" %02x", ((__u8 *) buffer)[i]); + printf("%s\n", i < len ? "..." : ""); + } +#endif +} + +#define PTD_DIR_STR(ptd) ({char __c; \ + switch(PTD_GET_DIR(ptd)){ \ + case 0: __c = 's'; break; \ + case 1: __c = 'o'; break; \ + default: __c = 'i'; break; \ + }; __c;}) + +/* + Dump PTD info. The code documents the format + perfectly, right :) +*/ +static inline void dump_ptd(struct ptd *ptd) +{ +#if defined(VERBOSE) + int k; +#endif + + DBG("PTD(ext) : cc:%x %d%c%d %d,%d,%d t:%x %x%x%x", + PTD_GET_CC(ptd), + PTD_GET_FA(ptd), PTD_DIR_STR(ptd), PTD_GET_EP(ptd), + PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd), + PTD_GET_TOGGLE(ptd), + PTD_GET_ACTIVE(ptd), PTD_GET_SPD(ptd), PTD_GET_LAST(ptd)); +#if defined(VERBOSE) + printf("isp116x: %s: PTD(byte): ", __FUNCTION__); + for (k = 0; k < sizeof(struct ptd); ++k) + printf("%02x ", ((u8 *) ptd)[k]); + printf("\n"); +#endif +} + +static inline void dump_ptd_data(struct ptd *ptd, u8 * buf, int type) +{ +#if defined(VERBOSE) + int k; + + if (type == 0 /* 0ut data */ ) { + printf("isp116x: %s: out data: ", __FUNCTION__); + for (k = 0; k < PTD_GET_LEN(ptd); ++k) + printf("%02x ", ((u8 *) buf)[k]); + printf("\n"); + } + if (type == 1 /* 1n data */ ) { + printf("isp116x: %s: in data: ", __FUNCTION__); + for (k = 0; k < PTD_GET_COUNT(ptd); ++k) + printf("%02x ", ((u8 *) buf)[k]); + printf("\n"); + } + + if (PTD_GET_LAST(ptd)) + DBG("--- last PTD ---"); +#endif +} + +#else + +#define dump_msg(dev, pipe, buffer, len, str) do { } while (0) +#define dump_pkt(dev, pipe, buffer, len, setup, str, small) do {} while (0) + +#define dump_ptd(ptd) do {} while (0) +#define dump_ptd_data(ptd, buf, type) do {} while (0) + +#endif + +/* --- Virtual Root Hub ---------------------------------------------------- */ + +/* Device descriptor */ +static __u8 root_hub_dev_des[] = { + 0x12, /* __u8 bLength; */ + 0x01, /* __u8 bDescriptorType; Device */ + 0x10, /* __u16 bcdUSB; v1.1 */ + 0x01, + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x00, /* __u8 bDeviceProtocol; */ + 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ + 0x00, /* __u16 idVendor; */ + 0x00, + 0x00, /* __u16 idProduct; */ + 0x00, + 0x00, /* __u16 bcdDevice; */ + 0x00, + 0x00, /* __u8 iManufacturer; */ + 0x01, /* __u8 iProduct; */ + 0x00, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; + +/* Configuration descriptor */ +static __u8 root_hub_config_des[] = { + 0x09, /* __u8 bLength; */ + 0x02, /* __u8 bDescriptorType; Configuration */ + 0x19, /* __u16 wTotalLength; */ + 0x00, + 0x01, /* __u8 bNumInterfaces; */ + 0x01, /* __u8 bConfigurationValue; */ + 0x00, /* __u8 iConfiguration; */ + 0x40, /* __u8 bmAttributes; + Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */ + 0x00, /* __u8 MaxPower; */ + + /* interface */ + 0x09, /* __u8 if_bLength; */ + 0x04, /* __u8 if_bDescriptorType; Interface */ + 0x00, /* __u8 if_bInterfaceNumber; */ + 0x00, /* __u8 if_bAlternateSetting; */ + 0x01, /* __u8 if_bNumEndpoints; */ + 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ + 0x00, /* __u8 if_bInterfaceSubClass; */ + 0x00, /* __u8 if_bInterfaceProtocol; */ + 0x00, /* __u8 if_iInterface; */ + + /* endpoint */ + 0x07, /* __u8 ep_bLength; */ + 0x05, /* __u8 ep_bDescriptorType; Endpoint */ + 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + 0x00, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */ + 0x02, + 0xff /* __u8 ep_bInterval; 255 ms */ +}; + +static unsigned char root_hub_str_index0[] = { + 0x04, /* __u8 bLength; */ + 0x03, /* __u8 bDescriptorType; String-descriptor */ + 0x09, /* __u8 lang ID */ + 0x04, /* __u8 lang ID */ +}; + +static unsigned char root_hub_str_index1[] = { + 0x22, /* __u8 bLength; */ + 0x03, /* __u8 bDescriptorType; String-descriptor */ + 'I', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'S', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'P', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + '1', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + '1', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + '6', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'x', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + ' ', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'R', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'o', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'o', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 't', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + ' ', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'H', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'u', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'b', /* __u8 Unicode */ + 0, /* __u8 Unicode */ +}; + +/* + * Hub class-specific descriptor is constructed dynamically + */ + +/* --- Virtual root hub management functions ------------------------------- */ + +static int rh_check_port_status(struct isp116x *isp116x) +{ + u32 temp, ndp, i; + int res; + + res = -1; + temp = isp116x_read_reg32(isp116x, HCRHSTATUS); + ndp = (temp & RH_A_NDP); + for (i = 0; i < ndp; i++) { + temp = isp116x_read_reg32(isp116x, HCRHPORT1 + i); + /* check for a device disconnect */ + if (((temp & (RH_PS_PESC | RH_PS_CSC)) == + (RH_PS_PESC | RH_PS_CSC)) && ((temp & RH_PS_CCS) == 0)) { + res = i; + break; + } + } + return res; +} + +/* --- HC management functions --------------------------------------------- */ + +/* Write len bytes to fifo, pad till 32-bit boundary + */ +static void write_ptddata_to_fifo(struct isp116x *isp116x, void *buf, int len) +{ + u8 *dp = (u8 *) buf; + u16 *dp2 = (u16 *) buf; + u16 w; + int quot = len % 4; + + if ((unsigned long)dp2 & 1) { + /* not aligned */ + for (; len > 1; len -= 2) { + w = *dp++; + w |= *dp++ << 8; + isp116x_raw_write_data16(isp116x, w); + } + if (len) + isp116x_write_data16(isp116x, (u16) * dp); + } else { + /* aligned */ + for (; len > 1; len -= 2) + isp116x_raw_write_data16(isp116x, *dp2++); + if (len) + isp116x_write_data16(isp116x, 0xff & *((u8 *) dp2)); + } + if (quot == 1 || quot == 2) + isp116x_raw_write_data16(isp116x, 0); +} + +/* Read len bytes from fifo and then read till 32-bit boundary + */ +static void read_ptddata_from_fifo(struct isp116x *isp116x, void *buf, int len) +{ + u8 *dp = (u8 *) buf; + u16 *dp2 = (u16 *) buf; + u16 w; + int quot = len % 4; + + if ((unsigned long)dp2 & 1) { + /* not aligned */ + for (; len > 1; len -= 2) { + w = isp116x_raw_read_data16(isp116x); + *dp++ = w & 0xff; + *dp++ = (w >> 8) & 0xff; + } + if (len) + *dp = 0xff & isp116x_read_data16(isp116x); + } else { + /* aligned */ + for (; len > 1; len -= 2) + *dp2++ = isp116x_raw_read_data16(isp116x); + if (len) + *(u8 *) dp2 = 0xff & isp116x_read_data16(isp116x); + } + if (quot == 1 || quot == 2) + isp116x_raw_read_data16(isp116x); +} + +/* Write PTD's and data for scheduled transfers into the fifo ram. + * Fifo must be empty and ready */ +static void pack_fifo(struct isp116x *isp116x, struct usb_device *dev, + unsigned long pipe, struct ptd *ptd, int n, void *data, + int len) +{ + int buflen = n * sizeof(struct ptd) + len; + int i, done; + + DBG("--- pack buffer %p - %d bytes (fifo %d) ---", data, len, buflen); + + isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT); + isp116x_write_reg16(isp116x, HCXFERCTR, buflen); + isp116x_write_addr(isp116x, HCATLPORT | ISP116x_WRITE_OFFSET); + + done = 0; + for (i = 0; i < n; i++) { + DBG("i=%d - done=%d - len=%d", i, done, PTD_GET_LEN(&ptd[i])); + + dump_ptd(&ptd[i]); + isp116x_write_data16(isp116x, ptd[i].count); + isp116x_write_data16(isp116x, ptd[i].mps); + isp116x_write_data16(isp116x, ptd[i].len); + isp116x_write_data16(isp116x, ptd[i].faddr); + + dump_ptd_data(&ptd[i], (__u8 *) data + done, 0); + write_ptddata_to_fifo(isp116x, + (__u8 *) data + done, + PTD_GET_LEN(&ptd[i])); + + done += PTD_GET_LEN(&ptd[i]); + } +} + +/* Read the processed PTD's and data from fifo ram back to URBs' buffers. + * Fifo must be full and done */ +static int unpack_fifo(struct isp116x *isp116x, struct usb_device *dev, + unsigned long pipe, struct ptd *ptd, int n, void *data, + int len) +{ + int buflen = n * sizeof(struct ptd) + len; + int i, done, cc, ret; + + isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT); + isp116x_write_reg16(isp116x, HCXFERCTR, buflen); + isp116x_write_addr(isp116x, HCATLPORT); + + ret = TD_CC_NOERROR; + done = 0; + for (i = 0; i < n; i++) { + DBG("i=%d - done=%d - len=%d", i, done, PTD_GET_LEN(&ptd[i])); + + ptd[i].count = isp116x_read_data16(isp116x); + ptd[i].mps = isp116x_read_data16(isp116x); + ptd[i].len = isp116x_read_data16(isp116x); + ptd[i].faddr = isp116x_read_data16(isp116x); + dump_ptd(&ptd[i]); + + read_ptddata_from_fifo(isp116x, + (__u8 *) data + done, + PTD_GET_LEN(&ptd[i])); + dump_ptd_data(&ptd[i], (__u8 *) data + done, 1); + + done += PTD_GET_LEN(&ptd[i]); + + cc = PTD_GET_CC(&ptd[i]); + if (cc == TD_DATAUNDERRUN) { /* underrun is no error... */ + DBG("allowed data underrun"); + cc = TD_CC_NOERROR; + } + if (cc != TD_CC_NOERROR && ret == TD_CC_NOERROR) + ret = cc; + } + + DBG("--- unpack buffer %p - %d bytes (fifo %d) ---", data, len, buflen); + + return ret; +} + +/* Interrupt handling + */ +static int isp116x_interrupt(struct isp116x *isp116x) +{ + u16 irqstat; + u32 intstat; + int ret = 0; + + isp116x_write_reg16(isp116x, HCuPINTENB, 0); + irqstat = isp116x_read_reg16(isp116x, HCuPINT); + isp116x_write_reg16(isp116x, HCuPINT, irqstat); + DBG(">>>>>> irqstat %x <<<<<<", irqstat); + + if (irqstat & HCuPINT_ATL) { + DBG(">>>>>> HCuPINT_ATL <<<<<<"); + ret = 1; + } + + if (irqstat & HCuPINT_OPR) { + intstat = isp116x_read_reg32(isp116x, HCINTSTAT); + isp116x_write_reg32(isp116x, HCINTSTAT, intstat); + DBG(">>>>>> HCuPINT_OPR %x <<<<<<", intstat); + + if (intstat & HCINT_UE) { + ERR("unrecoverable error, controller disabled"); + + /* FIXME: be optimistic, hope that bug won't repeat + * often. Make some non-interrupt context restart the + * controller. Count and limit the retries though; + * either hardware or software errors can go forever... + */ + isp116x_reset(isp116x); + ret = -1; + return -1; + } + + if (intstat & HCINT_RHSC) { + got_rhsc = 1; + ret = 1; + /* When root hub or any of its ports is going + to come out of suspend, it may take more + than 10ms for status bits to stabilize. */ + wait_ms(20); + } + + if (intstat & HCINT_SO) { + ERR("schedule overrun"); + ret = -1; + } + + irqstat &= ~HCuPINT_OPR; + } + + return ret; +} + +#define PTD_NUM 64 /* it should be enougth... */ +struct ptd ptd[PTD_NUM]; +static inline int max_transfer_len(struct usb_device *dev, unsigned long pipe) +{ + return min(PTD_NUM * usb_maxpacket(dev, pipe), PTD_NUM * 16); +} + +/* Do an USB transfer + */ +static int isp116x_submit_job(struct usb_device *dev, unsigned long pipe, + int dir, void *buffer, int len) +{ + struct isp116x *isp116x = &isp116x_dev; + int type = usb_pipetype(pipe); + int epnum = usb_pipeendpoint(pipe); + int max = usb_maxpacket(dev, pipe); + int dir_out = usb_pipeout(pipe); + int speed_low = usb_pipeslow(pipe); + int i, done, stat, timeout, cc; + int retries = 10; + + DBG("------------------------------------------------"); + dump_msg(dev, pipe, buffer, len, "SUBMIT"); + DBG("------------------------------------------------"); + + if (isp116x->disabled) { + ERR("EPIPE"); + dev->status = USB_ST_CRC_ERR; + return -1; + } + + /* device pulled? Shortcut the action. */ + if (devgone == dev) { + ERR("ENODEV"); + dev->status = USB_ST_CRC_ERR; + return USB_ST_CRC_ERR; + } + + if (!max) { + ERR("pipesize for pipe %lx is zero", pipe); + dev->status = USB_ST_CRC_ERR; + return -1; + } + + if (type == PIPE_ISOCHRONOUS) { + ERR("isochronous transfers not supported"); + dev->status = USB_ST_CRC_ERR; + return -1; + } + + /* FIFO not empty? */ + if (isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_FULL) { + ERR("****** FIFO not empty! ******"); + dev->status = USB_ST_BUF_ERR; + return -1; + } + + retry: + isp116x_write_reg32(isp116x, HCINTSTAT, 0xff); + + /* Prepare the PTD data */ + done = 0; + i = 0; + do { + ptd[i].count = PTD_CC_MSK | PTD_ACTIVE_MSK | + PTD_TOGGLE(usb_gettoggle(dev, epnum, dir_out)); + ptd[i].mps = PTD_MPS(max) | PTD_SPD(speed_low) | PTD_EP(epnum); + ptd[i].len = PTD_LEN(max > len - done ? len - done : max) | + PTD_DIR(dir); + ptd[i].faddr = PTD_FA(usb_pipedevice(pipe)); + + usb_dotoggle(dev, epnum, dir_out); + done += PTD_GET_LEN(&ptd[i]); + i++; + if (i >= PTD_NUM) { + ERR("****** Cannot pack buffer! ******"); + dev->status = USB_ST_BUF_ERR; + return -1; + } + } while (done < len); + ptd[i - 1].mps |= PTD_LAST_MSK; + + /* Pack data into FIFO ram */ + pack_fifo(isp116x, dev, pipe, ptd, i, buffer, len); +#ifdef EXTRA_DELAY + wait_ms(EXTRA_DELAY); +#endif + + /* Start the data transfer */ + + /* Allow more time for a BULK device to react - some are slow */ + if (usb_pipetype(pipe) == PIPE_BULK) + timeout = 5000; + else + timeout = 100; + + /* Wait for it to complete */ + for (;;) { + /* Check whether the controller is done */ + stat = isp116x_interrupt(isp116x); + + if (stat < 0) { + dev->status = USB_ST_CRC_ERR; + break; + } + if (stat > 0) + break; + + /* Check the timeout */ + if (--timeout) + udelay(1); + else { + ERR("CTL:TIMEOUT "); + stat = USB_ST_CRC_ERR; + break; + } + } + + /* We got an Root Hub Status Change interrupt */ + if (got_rhsc) { + isp116x_show_regs(isp116x); + + got_rhsc = 0; + + /* Abuse timeout */ + timeout = rh_check_port_status(isp116x); + if (timeout >= 0) { + /* + * FIXME! NOTE! AAAARGH! + * This is potentially dangerous because it assumes + * that only one device is ever plugged in! + */ + devgone = dev; + } + } + + /* Ok, now we can read transfer status */ + + /* FIFO not ready? */ + if (!(isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_DONE)) { + ERR("****** FIFO not ready! ******"); + dev->status = USB_ST_BUF_ERR; + return -1; + } + + /* Unpack data from FIFO ram */ + cc = unpack_fifo(isp116x, dev, pipe, ptd, i, buffer, len); + + /* Mmm... sometime we get 0x0f as cc which is a non sense! + * Just retry the transfer... + */ + if (cc == 0x0f && retries-- > 0) { + usb_dotoggle(dev, epnum, dir_out); + goto retry; + } + + if (cc != TD_CC_NOERROR) { + DBG("****** completition code error %x ******", cc); + switch (cc) { + case TD_CC_BITSTUFFING: + dev->status = USB_ST_BIT_ERR; + break; + case TD_CC_STALL: + dev->status = USB_ST_STALLED; + break; + case TD_BUFFEROVERRUN: + case TD_BUFFERUNDERRUN: + dev->status = USB_ST_BUF_ERR; + break; + default: + dev->status = USB_ST_CRC_ERR; + } + return -cc; + } + + dump_msg(dev, pipe, buffer, len, "SUBMIT(ret)"); + + dev->status = 0; + return done; +} + +/* Adapted from au1x00_usb_ohci.c + */ +static int isp116x_submit_rh_msg(struct usb_device *dev, unsigned long pipe, + void *buffer, int transfer_len, + struct devrequest *cmd) +{ + struct isp116x *isp116x = &isp116x_dev; + u32 tmp = 0; + + int leni = transfer_len; + int len = 0; + int stat = 0; + u32 datab[4]; + u8 *data_buf = (u8 *) datab; + u16 bmRType_bReq; + u16 wValue; + u16 wIndex; + u16 wLength; + + if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) { + INFO("Root-Hub submit IRQ: NOT implemented"); + return 0; + } + + bmRType_bReq = cmd->requesttype | (cmd->request << 8); + wValue = swap_16(cmd->value); + wIndex = swap_16(cmd->index); + wLength = swap_16(cmd->length); + + DBG("--- HUB ----------------------------------------"); + DBG("submit rh urb, req=%x val=%#x index=%#x len=%d", + bmRType_bReq, wValue, wIndex, wLength); + dump_msg(dev, pipe, buffer, transfer_len, "RH"); + DBG("------------------------------------------------"); + + switch (bmRType_bReq) { + case RH_GET_STATUS: + DBG("RH_GET_STATUS"); + + *(__u16 *) data_buf = swap_16(1); + len = 2; + break; + + case RH_GET_STATUS | RH_INTERFACE: + DBG("RH_GET_STATUS | RH_INTERFACE"); + + *(__u16 *) data_buf = swap_16(0); + len = 2; + break; + + case RH_GET_STATUS | RH_ENDPOINT: + DBG("RH_GET_STATUS | RH_ENDPOINT"); + + *(__u16 *) data_buf = swap_16(0); + len = 2; + break; + + case RH_GET_STATUS | RH_CLASS: + DBG("RH_GET_STATUS | RH_CLASS"); + + tmp = isp116x_read_reg32(isp116x, HCRHSTATUS); + + *(__u32 *) data_buf = swap_32(tmp & ~(RH_HS_CRWE | RH_HS_DRWE)); + len = 4; + break; + + case RH_GET_STATUS | RH_OTHER | RH_CLASS: + DBG("RH_GET_STATUS | RH_OTHER | RH_CLASS"); + + tmp = isp116x_read_reg32(isp116x, HCRHPORT1 + wIndex - 1); + *(__u32 *) data_buf = swap_32(tmp); + isp116x_show_regs(isp116x); + len = 4; + break; + + case RH_CLEAR_FEATURE | RH_ENDPOINT: + DBG("RH_CLEAR_FEATURE | RH_ENDPOINT"); + + switch (wValue) { + case RH_ENDPOINT_STALL: + DBG("C_HUB_ENDPOINT_STALL"); + len = 0; + break; + } + break; + + case RH_CLEAR_FEATURE | RH_CLASS: + DBG("RH_CLEAR_FEATURE | RH_CLASS"); + + switch (wValue) { + case RH_C_HUB_LOCAL_POWER: + DBG("C_HUB_LOCAL_POWER"); + len = 0; + break; + + case RH_C_HUB_OVER_CURRENT: + DBG("C_HUB_OVER_CURRENT"); + isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_OCIC); + len = 0; + break; + } + break; + + case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: + DBG("RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS"); + + switch (wValue) { + case RH_PORT_ENABLE: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_CCS); + len = 0; + break; + + case RH_PORT_SUSPEND: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_POCI); + len = 0; + break; + + case RH_PORT_POWER: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_LSDA); + len = 0; + break; + + case RH_C_PORT_CONNECTION: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_CSC); + len = 0; + break; + + case RH_C_PORT_ENABLE: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_PESC); + len = 0; + break; + + case RH_C_PORT_SUSPEND: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_PSSC); + len = 0; + break; + + case RH_C_PORT_OVER_CURRENT: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_POCI); + len = 0; + break; + + case RH_C_PORT_RESET: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_PRSC); + len = 0; + break; + + default: + ERR("invalid wValue"); + stat = USB_ST_STALLED; + } + + isp116x_show_regs(isp116x); + + break; + + case RH_SET_FEATURE | RH_OTHER | RH_CLASS: + DBG("RH_SET_FEATURE | RH_OTHER | RH_CLASS"); + + switch (wValue) { + case RH_PORT_SUSPEND: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_PSS); + len = 0; + break; + + case RH_PORT_RESET: + /* Spin until any current reset finishes */ + while (1) { + tmp = + isp116x_read_reg32(isp116x, + HCRHPORT1 + wIndex - 1); + if (!(tmp & RH_PS_PRS)) + break; + wait_ms(1); + } + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_PRS); + wait_ms(10); + + len = 0; + break; + + case RH_PORT_POWER: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_PPS); + len = 0; + break; + + case RH_PORT_ENABLE: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_PES); + len = 0; + break; + + default: + ERR("invalid wValue"); + stat = USB_ST_STALLED; + } + + isp116x_show_regs(isp116x); + + break; + + case RH_SET_ADDRESS: + DBG("RH_SET_ADDRESS"); + + rh_devnum = wValue; + len = 0; + break; + + case RH_GET_DESCRIPTOR: + DBG("RH_GET_DESCRIPTOR: %x, %d", wValue, wLength); + + switch (wValue) { + case (USB_DT_DEVICE << 8): /* device descriptor */ + len = min_t(unsigned int, + leni, min_t(unsigned int, + sizeof(root_hub_dev_des), + wLength)); + data_buf = root_hub_dev_des; + break; + + case (USB_DT_CONFIG << 8): /* configuration descriptor */ + len = min_t(unsigned int, + leni, min_t(unsigned int, + sizeof(root_hub_config_des), + wLength)); + data_buf = root_hub_config_des; + break; + + case ((USB_DT_STRING << 8) | 0x00): /* string 0 descriptors */ + len = min_t(unsigned int, + leni, min_t(unsigned int, + sizeof(root_hub_str_index0), + wLength)); + data_buf = root_hub_str_index0; + break; + + case ((USB_DT_STRING << 8) | 0x01): /* string 1 descriptors */ + len = min_t(unsigned int, + leni, min_t(unsigned int, + sizeof(root_hub_str_index1), + wLength)); + data_buf = root_hub_str_index1; + break; + + default: + ERR("invalid wValue"); + stat = USB_ST_STALLED; + } + + break; + + case RH_GET_DESCRIPTOR | RH_CLASS: + DBG("RH_GET_DESCRIPTOR | RH_CLASS"); + + tmp = isp116x_read_reg32(isp116x, HCRHDESCA); + + data_buf[0] = 0x09; /* min length; */ + data_buf[1] = 0x29; + data_buf[2] = tmp & RH_A_NDP; + data_buf[3] = 0; + if (tmp & RH_A_PSM) /* per-port power switching? */ + data_buf[3] |= 0x01; + if (tmp & RH_A_NOCP) /* no overcurrent reporting? */ + data_buf[3] |= 0x10; + else if (tmp & RH_A_OCPM) /* per-port overcurrent rep? */ + data_buf[3] |= 0x08; + + /* Corresponds to data_buf[4-7] */ + datab[1] = 0; + data_buf[5] = (tmp & RH_A_POTPGT) >> 24; + + tmp = isp116x_read_reg32(isp116x, HCRHDESCB); + + data_buf[7] = tmp & RH_B_DR; + if (data_buf[2] < 7) + data_buf[8] = 0xff; + else { + data_buf[0] += 2; + data_buf[8] = (tmp & RH_B_DR) >> 8; + data_buf[10] = data_buf[9] = 0xff; + } + + len = min_t(unsigned int, leni, + min_t(unsigned int, data_buf[0], wLength)); + break; + + case RH_GET_CONFIGURATION: + DBG("RH_GET_CONFIGURATION"); + + *(__u8 *) data_buf = 0x01; + len = 1; + break; + + case RH_SET_CONFIGURATION: + DBG("RH_SET_CONFIGURATION"); + + isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPSC); + len = 0; + break; + + default: + ERR("*** *** *** unsupported root hub command *** *** ***"); + stat = USB_ST_STALLED; + } + + len = min_t(int, len, leni); + if (buffer != data_buf) + memcpy(buffer, data_buf, len); + + dev->act_len = len; + dev->status = stat; + DBG("dev act_len %d, status %d", dev->act_len, dev->status); + + dump_msg(dev, pipe, buffer, transfer_len, "RH(ret)"); + + return stat; +} + +/* --- Transfer functions -------------------------------------------------- */ + +int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int len, int interval) +{ + DBG("dev=%p pipe=%#lx buf=%p size=%d int=%d", + dev, pipe, buffer, len, interval); + + return -1; +} + +int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int len, struct devrequest *setup) +{ + int devnum = usb_pipedevice(pipe); + int epnum = usb_pipeendpoint(pipe); + int max = max_transfer_len(dev, pipe); + int dir_in = usb_pipein(pipe); + int done, ret; + + /* Control message is for the HUB? */ + if (devnum == rh_devnum) + return isp116x_submit_rh_msg(dev, pipe, buffer, len, setup); + + /* Ok, no HUB message so send the message to the device */ + + /* Setup phase */ + DBG("--- SETUP PHASE --------------------------------"); + usb_settoggle(dev, epnum, 1, 0); + ret = isp116x_submit_job(dev, pipe, + PTD_DIR_SETUP, + setup, sizeof(struct devrequest)); + if (ret < 0) { + DBG("control setup phase error (ret = %d", ret); + return -1; + } + + /* Data phase */ + DBG("--- DATA PHASE ---------------------------------"); + done = 0; + usb_settoggle(dev, epnum, !dir_in, 1); + while (done < len) { + ret = isp116x_submit_job(dev, pipe, + dir_in ? PTD_DIR_IN : PTD_DIR_OUT, + (__u8 *) buffer + done, + max > len - done ? len - done : max); + if (ret < 0) { + DBG("control data phase error (ret = %d)", ret); + return -1; + } + done += ret; + + if (dir_in && ret < max) /* short packet */ + break; + } + + /* Status phase */ + DBG("--- STATUS PHASE -------------------------------"); + usb_settoggle(dev, epnum, !dir_in, 1); + ret = isp116x_submit_job(dev, pipe, + !dir_in ? PTD_DIR_IN : PTD_DIR_OUT, NULL, 0); + if (ret < 0) { + DBG("control status phase error (ret = %d", ret); + return -1; + } + + dev->act_len = done; + + dump_msg(dev, pipe, buffer, len, "DEV(ret)"); + + return done; +} + +int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int len) +{ + int dir_out = usb_pipeout(pipe); + int max = max_transfer_len(dev, pipe); + int done, ret; + + DBG("--- BULK ---------------------------------------"); + DBG("dev=%ld pipe=%ld buf=%p size=%d dir_out=%d", + usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out); + + done = 0; + while (done < len) { + ret = isp116x_submit_job(dev, pipe, + !dir_out ? PTD_DIR_IN : PTD_DIR_OUT, + (__u8 *) buffer + done, + max > len - done ? len - done : max); + if (ret < 0) { + DBG("error on bulk message (ret = %d)", ret); + return -1; + } + + done += ret; + + if (!dir_out && ret < max) /* short packet */ + break; + } + + dev->act_len = done; + + return 0; +} + +/* --- Basic functions ----------------------------------------------------- */ + +static int isp116x_sw_reset(struct isp116x *isp116x) +{ + int retries = 15; + int ret = 0; + + DBG(""); + + isp116x->disabled = 1; + + isp116x_write_reg16(isp116x, HCSWRES, HCSWRES_MAGIC); + isp116x_write_reg32(isp116x, HCCMDSTAT, HCCMDSTAT_HCR); + while (--retries) { + /* It usually resets within 1 ms */ + wait_ms(1); + if (!(isp116x_read_reg32(isp116x, HCCMDSTAT) & HCCMDSTAT_HCR)) + break; + } + if (!retries) { + ERR("software reset timeout"); + ret = -1; + } + return ret; +} + +static int isp116x_reset(struct isp116x *isp116x) +{ + unsigned long t; + u16 clkrdy = 0; + int ret, timeout = 15 /* ms */ ; + + DBG(""); + + ret = isp116x_sw_reset(isp116x); + if (ret) + return ret; + + for (t = 0; t < timeout; t++) { + clkrdy = isp116x_read_reg16(isp116x, HCuPINT) & HCuPINT_CLKRDY; + if (clkrdy) + break; + wait_ms(1); + } + if (!clkrdy) { + ERR("clock not ready after %dms", timeout); + /* After sw_reset the clock won't report to be ready, if + H_WAKEUP pin is high. */ + ERR("please make sure that the H_WAKEUP pin is pulled low!"); + ret = -1; + } + return ret; +} + +static void isp116x_stop(struct isp116x *isp116x) +{ + u32 val; + + DBG(""); + + isp116x_write_reg16(isp116x, HCuPINTENB, 0); + + /* Switch off ports' power, some devices don't come up + after next 'start' without this */ + val = isp116x_read_reg32(isp116x, HCRHDESCA); + val &= ~(RH_A_NPS | RH_A_PSM); + isp116x_write_reg32(isp116x, HCRHDESCA, val); + isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS); + + isp116x_sw_reset(isp116x); +} + +/* + * Configure the chip. The chip must be successfully reset by now. + */ +static int isp116x_start(struct isp116x *isp116x) +{ + struct isp116x_platform_data *board = isp116x->board; + u32 val; + + DBG(""); + + /* Clear interrupt status and disable all interrupt sources */ + isp116x_write_reg16(isp116x, HCuPINT, 0xff); + isp116x_write_reg16(isp116x, HCuPINTENB, 0); + + isp116x_write_reg16(isp116x, HCITLBUFLEN, ISP116x_ITL_BUFSIZE); + isp116x_write_reg16(isp116x, HCATLBUFLEN, ISP116x_ATL_BUFSIZE); + + /* Hardware configuration */ + val = HCHWCFG_DBWIDTH(1); + if (board->sel15Kres) + val |= HCHWCFG_15KRSEL; + /* Remote wakeup won't work without working clock */ + if (board->remote_wakeup_enable) + val |= HCHWCFG_CLKNOTSTOP; + if (board->oc_enable) + val |= HCHWCFG_ANALOG_OC; + isp116x_write_reg16(isp116x, HCHWCFG, val); + + /* --- Root hub configuration */ + val = (25 << 24) & RH_A_POTPGT; + /* AN10003_1.pdf recommends RH_A_NPS (no power switching) to + be always set. Yet, instead, we request individual port + power switching. */ + val |= RH_A_PSM; + /* Report overcurrent per port */ + val |= RH_A_OCPM; + isp116x_write_reg32(isp116x, HCRHDESCA, val); + isp116x->rhdesca = isp116x_read_reg32(isp116x, HCRHDESCA); + + val = RH_B_PPCM; + isp116x_write_reg32(isp116x, HCRHDESCB, val); + isp116x->rhdescb = isp116x_read_reg32(isp116x, HCRHDESCB); + + val = 0; + if (board->remote_wakeup_enable) + val |= RH_HS_DRWE; + isp116x_write_reg32(isp116x, HCRHSTATUS, val); + isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS); + + isp116x_write_reg32(isp116x, HCFMINTVL, 0x27782edf); + + /* Go operational */ + val = HCCONTROL_USB_OPER; + if (board->remote_wakeup_enable) + val |= HCCONTROL_RWE; + isp116x_write_reg32(isp116x, HCCONTROL, val); + + /* Disable ports to avoid race in device enumeration */ + isp116x_write_reg32(isp116x, HCRHPORT1, RH_PS_CCS); + isp116x_write_reg32(isp116x, HCRHPORT2, RH_PS_CCS); + + isp116x_show_regs(isp116x); + + isp116x->disabled = 0; + + return 0; +} + +/* --- Init functions ------------------------------------------------------ */ + +int isp116x_check_id(struct isp116x *isp116x) +{ + int val; + + val = isp116x_read_reg16(isp116x, HCCHIPID); + if ((val & HCCHIPID_MASK) != HCCHIPID_MAGIC) { + ERR("invalid chip ID %04x", val); + return -1; + } + + return 0; +} + +int usb_lowlevel_init(void) +{ + struct isp116x *isp116x = &isp116x_dev; + + DBG(""); + + /* Init device registers addr */ + isp116x->addr_reg = (u16 *) ISP116X_HCD_ADDR; + isp116x->data_reg = (u16 *) ISP116X_HCD_DATA; + + /* Setup specific board settings */ +#ifdef ISP116X_HCD_SEL15kRES + isp116x_board.sel15Kres = 1; +#endif +#ifdef ISP116X_HCD_OC_ENABLE + isp116x_board.oc_enable = 1; +#endif +#ifdef ISP116X_HCD_REMOTE_WAKEUP_ENABLE + isp116x_board.remote_wakeup_enable = 1; +#endif + isp116x->board = &isp116x_board; + + /* Try to get ISP116x silicon chip ID */ + if (isp116x_check_id(isp116x) < 0) + return -1; + + isp116x->disabled = 1; + isp116x->sleeping = 0; + + isp116x_reset(isp116x); + isp116x_start(isp116x); + + return 0; +} + +int usb_lowlevel_stop(void) +{ + struct isp116x *isp116x = &isp116x_dev; + + DBG(""); + + if (!isp116x->disabled) + isp116x_stop(isp116x); + + return 0; +} + +#endif /* CONFIG_USB_ISP116X_HCD */ diff --git a/drivers/isp116x.h b/drivers/isp116x.h new file mode 100644 index 0000000..a3ce3b5 --- /dev/null +++ b/drivers/isp116x.h @@ -0,0 +1,489 @@ +/* + * ISP116x register declarations and HCD data structures + * + * Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it> + * Copyright (C) 2007 Eurotech S.p.A. <info@eurotech.it> + * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee> + * Portions: + * Copyright (C) 2004 Lothar Wassmann + * Copyright (C) 2004 Psion Teklogix + * Copyright (C) 2004 David Brownell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifdef DEBUG +#define DBG(fmt, args...) \ + printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args) +#else +#define DBG(fmt, args...) do {} while (0) +#endif + +#ifdef VERBOSE +# define VDBG DBG +#else +# define VDBG(fmt, args...) do {} while (0) +#endif + +#define ERR(fmt, args...) \ + printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args) +#define WARN(fmt, args...) \ + printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args) +#define INFO(fmt, args...) \ + printf("isp116x: " fmt "\n" , ## args) + +/* ------------------------------------------------------------------------- */ + +/* us of 1ms frame */ +#define MAX_LOAD_LIMIT 850 + +/* Full speed: max # of bytes to transfer for a single urb + at a time must be < 1024 && must be multiple of 64. + 832 allows transfering 4kiB within 5 frames. */ +#define MAX_TRANSFER_SIZE_FULLSPEED 832 + +/* Low speed: there is no reason to schedule in very big + chunks; often the requested long transfers are for + string descriptors containing short strings. */ +#define MAX_TRANSFER_SIZE_LOWSPEED 64 + +/* Bytetime (us), a rough indication of how much time it + would take to transfer a byte of useful data over USB */ +#define BYTE_TIME_FULLSPEED 1 +#define BYTE_TIME_LOWSPEED 20 + +/* Buffer sizes */ +#define ISP116x_BUF_SIZE 4096 +#define ISP116x_ITL_BUFSIZE 0 +#define ISP116x_ATL_BUFSIZE ((ISP116x_BUF_SIZE) - 2*(ISP116x_ITL_BUFSIZE)) + +#define ISP116x_WRITE_OFFSET 0x80 + +/* --- ISP116x registers/bits ---------------------------------------------- */ + +#define HCREVISION 0x00 +#define HCCONTROL 0x01 +#define HCCONTROL_HCFS (3 << 6) /* host controller + functional state */ +#define HCCONTROL_USB_RESET (0 << 6) +#define HCCONTROL_USB_RESUME (1 << 6) +#define HCCONTROL_USB_OPER (2 << 6) +#define HCCONTROL_USB_SUSPEND (3 << 6) +#define HCCONTROL_RWC (1 << 9) /* remote wakeup connected */ +#define HCCONTROL_RWE (1 << 10) /* remote wakeup enable */ +#define HCCMDSTAT 0x02 +#define HCCMDSTAT_HCR (1 << 0) /* host controller reset */ +#define HCCMDSTAT_SOC (3 << 16) /* scheduling overrun count */ +#define HCINTSTAT 0x03 +#define HCINT_SO (1 << 0) /* scheduling overrun */ +#define HCINT_WDH (1 << 1) /* writeback of done_head */ +#define HCINT_SF (1 << 2) /* start frame */ +#define HCINT_RD (1 << 3) /* resume detect */ +#define HCINT_UE (1 << 4) /* unrecoverable error */ +#define HCINT_FNO (1 << 5) /* frame number overflow */ +#define HCINT_RHSC (1 << 6) /* root hub status change */ +#define HCINT_OC (1 << 30) /* ownership change */ +#define HCINT_MIE (1 << 31) /* master interrupt enable */ +#define HCINTENB 0x04 +#define HCINTDIS 0x05 +#define HCFMINTVL 0x0d +#define HCFMREM 0x0e +#define HCFMNUM 0x0f +#define HCLSTHRESH 0x11 +#define HCRHDESCA 0x12 +#define RH_A_NDP (0x3 << 0) /* # downstream ports */ +#define RH_A_PSM (1 << 8) /* power switching mode */ +#define RH_A_NPS (1 << 9) /* no power switching */ +#define RH_A_DT (1 << 10) /* device type (mbz) */ +#define RH_A_OCPM (1 << 11) /* overcurrent protection + mode */ +#define RH_A_NOCP (1 << 12) /* no overcurrent protection */ +#define RH_A_POTPGT (0xff << 24) /* power on -> power good + time */ +#define HCRHDESCB 0x13 +#define RH_B_DR (0xffff << 0) /* device removable flags */ +#define RH_B_PPCM (0xffff << 16) /* port power control mask */ +#define HCRHSTATUS 0x14 +#define RH_HS_LPS (1 << 0) /* local power status */ +#define RH_HS_OCI (1 << 1) /* over current indicator */ +#define RH_HS_DRWE (1 << 15) /* device remote wakeup + enable */ +#define RH_HS_LPSC (1 << 16) /* local power status change */ +#define RH_HS_OCIC (1 << 17) /* over current indicator + change */ +#define RH_HS_CRWE (1 << 31) /* clear remote wakeup + enable */ +#define HCRHPORT1 0x15 +#define RH_PS_CCS (1 << 0) /* current connect status */ +#define RH_PS_PES (1 << 1) /* port enable status */ +#define RH_PS_PSS (1 << 2) /* port suspend status */ +#define RH_PS_POCI (1 << 3) /* port over current + indicator */ +#define RH_PS_PRS (1 << 4) /* port reset status */ +#define RH_PS_PPS (1 << 8) /* port power status */ +#define RH_PS_LSDA (1 << 9) /* low speed device attached */ +#define RH_PS_CSC (1 << 16) /* connect status change */ +#define RH_PS_PESC (1 << 17) /* port enable status change */ +#define RH_PS_PSSC (1 << 18) /* port suspend status + change */ +#define RH_PS_OCIC (1 << 19) /* over current indicator + change */ +#define RH_PS_PRSC (1 << 20) /* port reset status change */ +#define HCRHPORT_CLRMASK (0x1f << 16) +#define HCRHPORT2 0x16 +#define HCHWCFG 0x20 +#define HCHWCFG_15KRSEL (1 << 12) +#define HCHWCFG_CLKNOTSTOP (1 << 11) +#define HCHWCFG_ANALOG_OC (1 << 10) +#define HCHWCFG_DACK_MODE (1 << 8) +#define HCHWCFG_EOT_POL (1 << 7) +#define HCHWCFG_DACK_POL (1 << 6) +#define HCHWCFG_DREQ_POL (1 << 5) +#define HCHWCFG_DBWIDTH_MASK (0x03 << 3) +#define HCHWCFG_DBWIDTH(n) (((n) << 3) & HCHWCFG_DBWIDTH_MASK) +#define HCHWCFG_INT_POL (1 << 2) +#define HCHWCFG_INT_TRIGGER (1 << 1) +#define HCHWCFG_INT_ENABLE (1 << 0) +#define HCDMACFG 0x21 +#define HCDMACFG_BURST_LEN_MASK (0x03 << 5) +#define HCDMACFG_BURST_LEN(n) (((n) << 5) & HCDMACFG_BURST_LEN_MASK) +#define HCDMACFG_BURST_LEN_1 HCDMACFG_BURST_LEN(0) +#define HCDMACFG_BURST_LEN_4 HCDMACFG_BURST_LEN(1) +#define HCDMACFG_BURST_LEN_8 HCDMACFG_BURST_LEN(2) +#define HCDMACFG_DMA_ENABLE (1 << 4) +#define HCDMACFG_BUF_TYPE_MASK (0x07 << 1) +#define HCDMACFG_CTR_SEL (1 << 2) +#define HCDMACFG_ITLATL_SEL (1 << 1) +#define HCDMACFG_DMA_RW_SELECT (1 << 0) +#define HCXFERCTR 0x22 +#define HCuPINT 0x24 +#define HCuPINT_SOF (1 << 0) +#define HCuPINT_ATL (1 << 1) +#define HCuPINT_AIIEOT (1 << 2) +#define HCuPINT_OPR (1 << 4) +#define HCuPINT_SUSP (1 << 5) +#define HCuPINT_CLKRDY (1 << 6) +#define HCuPINTENB 0x25 +#define HCCHIPID 0x27 +#define HCCHIPID_MASK 0xff00 +#define HCCHIPID_MAGIC 0x6100 +#define HCSCRATCH 0x28 +#define HCSWRES 0x29 +#define HCSWRES_MAGIC 0x00f6 +#define HCITLBUFLEN 0x2a +#define HCATLBUFLEN 0x2b +#define HCBUFSTAT 0x2c +#define HCBUFSTAT_ITL0_FULL (1 << 0) +#define HCBUFSTAT_ITL1_FULL (1 << 1) +#define HCBUFSTAT_ATL_FULL (1 << 2) +#define HCBUFSTAT_ITL0_DONE (1 << 3) +#define HCBUFSTAT_ITL1_DONE (1 << 4) +#define HCBUFSTAT_ATL_DONE (1 << 5) +#define HCRDITL0LEN 0x2d +#define HCRDITL1LEN 0x2e +#define HCITLPORT 0x40 +#define HCATLPORT 0x41 + +/* PTD accessor macros. */ +#define PTD_GET_COUNT(p) (((p)->count & PTD_COUNT_MSK) >> 0) +#define PTD_COUNT(v) (((v) << 0) & PTD_COUNT_MSK) +#define PTD_GET_TOGGLE(p) (((p)->count & PTD_TOGGLE_MSK) >> 10) +#define PTD_TOGGLE(v) (((v) << 10) & PTD_TOGGLE_MSK) +#define PTD_GET_ACTIVE(p) (((p)->count & PTD_ACTIVE_MSK) >> 11) +#define PTD_ACTIVE(v) (((v) << 11) & PTD_ACTIVE_MSK) +#define PTD_GET_CC(p) (((p)->count & PTD_CC_MSK) >> 12) +#define PTD_CC(v) (((v) << 12) & PTD_CC_MSK) +#define PTD_GET_MPS(p) (((p)->mps & PTD_MPS_MSK) >> 0) +#define PTD_MPS(v) (((v) << 0) & PTD_MPS_MSK) +#define PTD_GET_SPD(p) (((p)->mps & PTD_SPD_MSK) >> 10) +#define PTD_SPD(v) (((v) << 10) & PTD_SPD_MSK) +#define PTD_GET_LAST(p) (((p)->mps & PTD_LAST_MSK) >> 11) +#define PTD_LAST(v) (((v) << 11) & PTD_LAST_MSK) +#define PTD_GET_EP(p) (((p)->mps & PTD_EP_MSK) >> 12) +#define PTD_EP(v) (((v) << 12) & PTD_EP_MSK) +#define PTD_GET_LEN(p) (((p)->len & PTD_LEN_MSK) >> 0) +#define PTD_LEN(v) (((v) << 0) & PTD_LEN_MSK) +#define PTD_GET_DIR(p) (((p)->len & PTD_DIR_MSK) >> 10) +#define PTD_DIR(v) (((v) << 10) & PTD_DIR_MSK) +#define PTD_GET_B5_5(p) (((p)->len & PTD_B5_5_MSK) >> 13) +#define PTD_B5_5(v) (((v) << 13) & PTD_B5_5_MSK) +#define PTD_GET_FA(p) (((p)->faddr & PTD_FA_MSK) >> 0) +#define PTD_FA(v) (((v) << 0) & PTD_FA_MSK) +#define PTD_GET_FMT(p) (((p)->faddr & PTD_FMT_MSK) >> 7) +#define PTD_FMT(v) (((v) << 7) & PTD_FMT_MSK) + +/* Hardware transfer status codes -- CC from ptd->count */ +#define TD_CC_NOERROR 0x00 +#define TD_CC_CRC 0x01 +#define TD_CC_BITSTUFFING 0x02 +#define TD_CC_DATATOGGLEM 0x03 +#define TD_CC_STALL 0x04 +#define TD_DEVNOTRESP 0x05 +#define TD_PIDCHECKFAIL 0x06 +#define TD_UNEXPECTEDPID 0x07 +#define TD_DATAOVERRUN 0x08 +#define TD_DATAUNDERRUN 0x09 + /* 0x0A, 0x0B reserved for hardware */ +#define TD_BUFFEROVERRUN 0x0C +#define TD_BUFFERUNDERRUN 0x0D + /* 0x0E, 0x0F reserved for HCD */ +#define TD_NOTACCESSED 0x0F + +/* ------------------------------------------------------------------------- */ + +#define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */ +#define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE) + +/* Philips transfer descriptor */ +struct ptd { + u16 count; +#define PTD_COUNT_MSK (0x3ff << 0) +#define PTD_TOGGLE_MSK (1 << 10) +#define PTD_ACTIVE_MSK (1 << 11) +#define PTD_CC_MSK (0xf << 12) + u16 mps; +#define PTD_MPS_MSK (0x3ff << 0) +#define PTD_SPD_MSK (1 << 10) +#define PTD_LAST_MSK (1 << 11) +#define PTD_EP_MSK (0xf << 12) + u16 len; +#define PTD_LEN_MSK (0x3ff << 0) +#define PTD_DIR_MSK (3 << 10) +#define PTD_DIR_SETUP (0) +#define PTD_DIR_OUT (1) +#define PTD_DIR_IN (2) +#define PTD_B5_5_MSK (1 << 13) + u16 faddr; +#define PTD_FA_MSK (0x7f << 0) +#define PTD_FMT_MSK (1 << 7) +} __attribute__ ((packed, aligned(2))); + +struct isp116x_ep { + struct usb_device *udev; + struct ptd ptd; + + u8 maxpacket; + u8 epnum; + u8 nextpid; + + u16 length; /* of current packet */ + unsigned char *data; /* to databuf */ + + u16 error_count; +}; + +/* URB struct */ +#define N_URB_TD 48 +#define URB_DEL 1 +typedef struct { + struct isp116x_ep *ed; + void *transfer_buffer; /* (in) associated data buffer */ + int actual_length; /* (return) actual transfer length */ + unsigned long pipe; /* (in) pipe information */ +#if 0 + int state; +#endif +} urb_priv_t; + +struct isp116x_platform_data { + /* Enable internal resistors on downstream ports */ + unsigned sel15Kres:1; + /* On-chip overcurrent detection */ + unsigned oc_enable:1; + /* Enable wakeup by devices on usb bus (e.g. wakeup + by attachment/detachment or by device activity + such as moving a mouse). When chosen, this option + prevents stopping internal clock, increasing + thereby power consumption in suspended state. */ + unsigned remote_wakeup_enable:1; +}; + +struct isp116x { + u16 *addr_reg; + u16 *data_reg; + + struct isp116x_platform_data *board; + + struct dentry *dentry; + unsigned long stat1, stat2, stat4, stat8, stat16; + + /* Status flags */ + unsigned disabled:1; + unsigned sleeping:1; + + /* Root hub registers */ + u32 rhdesca; + u32 rhdescb; + u32 rhstatus; + u32 rhport[2]; + + /* Schedule for the current frame */ + struct isp116x_ep *atl_active; + int atl_buflen; + int atl_bufshrt; + int atl_last_dir; + int atl_finishing; +}; + +/* ------------------------------------------------- */ + +/* Inter-io delay (ns). The chip is picky about access timings; it + * expects at least: + * 150ns delay between consecutive accesses to DATA_REG, + * 300ns delay between access to ADDR_REG and DATA_REG + * OE, WE MUST NOT be changed during these intervals + */ +#if defined(UDELAY) +#define isp116x_delay(h,d) udelay(d) +#else +#define isp116x_delay(h,d) do {} while (0) +#endif + +static inline void isp116x_write_addr(struct isp116x *isp116x, unsigned reg) +{ + writew(reg & 0xff, isp116x->addr_reg); + isp116x_delay(isp116x, UDELAY); +} + +static inline void isp116x_write_data16(struct isp116x *isp116x, u16 val) +{ + writew(val, isp116x->data_reg); + isp116x_delay(isp116x, UDELAY); +} + +static inline void isp116x_raw_write_data16(struct isp116x *isp116x, u16 val) +{ + __raw_writew(val, isp116x->data_reg); + isp116x_delay(isp116x, UDELAY); +} + +static inline u16 isp116x_read_data16(struct isp116x *isp116x) +{ + u16 val; + + val = readw(isp116x->data_reg); + isp116x_delay(isp116x, UDELAY); + return val; +} + +static inline u16 isp116x_raw_read_data16(struct isp116x *isp116x) +{ + u16 val; + + val = __raw_readw(isp116x->data_reg); + isp116x_delay(isp116x, UDELAY); + return val; +} + +static inline void isp116x_write_data32(struct isp116x *isp116x, u32 val) +{ + writew(val & 0xffff, isp116x->data_reg); + isp116x_delay(isp116x, UDELAY); + writew(val >> 16, isp116x->data_reg); + isp116x_delay(isp116x, UDELAY); +} + +static inline u32 isp116x_read_data32(struct isp116x *isp116x) +{ + u32 val; + + val = (u32) readw(isp116x->data_reg); + isp116x_delay(isp116x, UDELAY); + val |= ((u32) readw(isp116x->data_reg)) << 16; + isp116x_delay(isp116x, UDELAY); + return val; +} + +/* Let's keep register access functions out of line. Hint: + we wait at least 150 ns at every access. +*/ +static u16 isp116x_read_reg16(struct isp116x *isp116x, unsigned reg) +{ + isp116x_write_addr(isp116x, reg); + return isp116x_read_data16(isp116x); +} + +static u32 isp116x_read_reg32(struct isp116x *isp116x, unsigned reg) +{ + isp116x_write_addr(isp116x, reg); + return isp116x_read_data32(isp116x); +} + +static void isp116x_write_reg16(struct isp116x *isp116x, unsigned reg, + unsigned val) +{ + isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET); + isp116x_write_data16(isp116x, (u16) (val & 0xffff)); +} + +static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg, + unsigned val) +{ + isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET); + isp116x_write_data32(isp116x, (u32) val); +} + +/* --- USB HUB constants (not OHCI-specific; see hub.h) -------------------- */ + +/* destination of request */ +#define RH_INTERFACE 0x01 +#define RH_ENDPOINT 0x02 +#define RH_OTHER 0x03 + +#define RH_CLASS 0x20 +#define RH_VENDOR 0x40 + +/* Requests: bRequest << 8 | bmRequestType */ +#define RH_GET_STATUS 0x0080 +#define RH_CLEAR_FEATURE 0x0100 +#define RH_SET_FEATURE 0x0300 +#define RH_SET_ADDRESS 0x0500 +#define RH_GET_DESCRIPTOR 0x0680 +#define RH_SET_DESCRIPTOR 0x0700 +#define RH_GET_CONFIGURATION 0x0880 +#define RH_SET_CONFIGURATION 0x0900 +#define RH_GET_STATE 0x0280 +#define RH_GET_INTERFACE 0x0A80 +#define RH_SET_INTERFACE 0x0B00 +#define RH_SYNC_FRAME 0x0C80 +/* Our Vendor Specific Request */ +#define RH_SET_EP 0x2000 + +/* Hub port features */ +#define RH_PORT_CONNECTION 0x00 +#define RH_PORT_ENABLE 0x01 +#define RH_PORT_SUSPEND 0x02 +#define RH_PORT_OVER_CURRENT 0x03 +#define RH_PORT_RESET 0x04 +#define RH_PORT_POWER 0x08 +#define RH_PORT_LOW_SPEED 0x09 + +#define RH_C_PORT_CONNECTION 0x10 +#define RH_C_PORT_ENABLE 0x11 +#define RH_C_PORT_SUSPEND 0x12 +#define RH_C_PORT_OVER_CURRENT 0x13 +#define RH_C_PORT_RESET 0x14 + +/* Hub features */ +#define RH_C_HUB_LOCAL_POWER 0x00 +#define RH_C_HUB_OVER_CURRENT 0x01 + +#define RH_DEVICE_REMOTE_WAKEUP 0x00 +#define RH_ENDPOINT_STALL 0x01 + +#define RH_ACK 0x01 +#define RH_REQ_ERR -1 +#define RH_NACK 0x00 diff --git a/cpu/arm920t/at91rm9200/usb_ohci.c b/drivers/usb_ohci.c index 5b2c56c..70cb6a3 100644 --- a/cpu/arm920t/at91rm9200/usb_ohci.c +++ b/drivers/usb_ohci.c @@ -21,7 +21,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -43,16 +43,37 @@ #include <common.h> /* #include <pci.h> no PCI on the S3C24X0 */ -#ifdef CONFIG_USB_OHCI - -#include <asm/arch/hardware.h> +#ifdef CONFIG_USB_OHCI_NEW + +/* mk: are these really required? */ +#if defined(CONFIG_S3C2400) +# include <s3c2400.h> +#elif defined(CONFIG_S3C2410) +# include <s3c2410.h> +#elif defined(CONFIG_ARM920T) +# include <asm/arch/hardware.h> +#elif defined(CONFIG_CPU_MONAHANS) +# include <asm/arch/pxa-regs.h> +#elif defined(CONFIG_MPC5200) +# include <mpc5xxx.h> +#endif #include <malloc.h> #include <usb.h> #include "usb_ohci.h" -#define OHCI_USE_NPS /* force NoPowerSwitching mode */ +#if defined(CONFIG_ARM920T) || \ + defined(CONFIG_S3C2400) || \ + defined(CONFIG_S3C2410) || \ + defined(CONFIG_440EP) || \ + defined(CONFIG_MPC5200) +# define OHCI_USE_NPS /* force NoPowerSwitching mode */ +#endif + #undef OHCI_VERBOSE_DEBUG /* not always helpful */ +#undef DEBUG +#undef SHOW_INFO +#undef OHCI_FILL_TRACE /* For initializing controller (mask in an HCFS mode too) */ #define OHCI_CONTROL_INIT \ @@ -77,8 +98,13 @@ #define info(format, arg...) do {} while(0) #endif -#define m16_swap(x) swap_16(x) -#define m32_swap(x) swap_32(x) +#if defined(CONFIG_440EP) || defined(CONFIG_MPC5200) +# define m16_swap(x) (x) +# define m32_swap(x) (x) +#else +# define m16_swap(x) swap_16(x) +# define m32_swap(x) swap_32(x) +#endif /* global ohci_t */ static ohci_t gohci; @@ -95,6 +121,10 @@ int got_rhsc; /* device which was disconnected */ struct usb_device *devgone; +/* flag guarding URB transation */ +int urb_finished = 0; + + /*-------------------------------------------------------------------------*/ /* AMD-756 (D2 rev) reports corrupt register contents in some cases. @@ -400,6 +430,16 @@ int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer, return -1; } + /* if we have an unfinished URB from previous transaction let's + * fail and scream as quickly as possible so as not to corrupt + * further communication */ + if (!urb_finished) { + err("sohci_submit_job: URB NOT FINISHED"); + return -1; + } + /* we're about to begin a new transaction here so mark the URB unfinished */ + urb_finished = 0; + /* every endpoint has a ed, locate and fill it */ if (!(ed = ep_add_ed (dev, pipe))) { err("sohci_submit_job: ENOMEM"); @@ -488,7 +528,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi) if (ohci->ed_controltail == NULL) { writel (ed, &ohci->regs->ed_controlhead); } else { - ohci->ed_controltail->hwNextED = m32_swap (ed); + ohci->ed_controltail->hwNextED = m32_swap ((unsigned long)ed); } ed->ed_prev = ohci->ed_controltail; if (!ohci->ed_controltail && !ohci->ed_rm_list[0] && @@ -504,7 +544,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi) if (ohci->ed_bulktail == NULL) { writel (ed, &ohci->regs->ed_bulkhead); } else { - ohci->ed_bulktail->hwNextED = m32_swap (ed); + ohci->ed_bulktail->hwNextED = m32_swap ((unsigned long)ed); } ed->ed_prev = ohci->ed_bulktail; if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] && @@ -525,8 +565,10 @@ static int ep_link (ohci_t *ohci, ed_t *edi) * the link from the ed still points to another operational ed or 0 * so the HC can eventually finish the processing of the unlinked ed */ -static int ep_unlink (ohci_t *ohci, ed_t *ed) +static int ep_unlink (ohci_t *ohci, ed_t *edi) { + volatile ed_t *ed = edi; + ed->hwINFO |= m32_swap (OHCI_ED_SKIP); switch (ed->type) { @@ -571,12 +613,14 @@ static int ep_unlink (ohci_t *ohci, ed_t *ed) /*-------------------------------------------------------------------------*/ -/* add/reinit an endpoint; this should be done once at the usb_set_configuration command, - * but the USB stack is a little bit stateless so we do it at every transaction - * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK - * in all other cases the state is left unchanged - * the ed info fields are setted anyway even though most of them should not change */ - +/* add/reinit an endpoint; this should be done once at the + * usb_set_configuration command, but the USB stack is a little bit + * stateless so we do it at every transaction if the state of the ed + * is ED_NEW then a dummy td is added and the state is changed to + * ED_UNLINK in all other cases the state is left unchanged the ed + * info fields are setted anyway even though most of them should not + * change + */ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe) { td_t *td; @@ -596,7 +640,7 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe) ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */ /* dummy td; end of td list for ed */ td = td_alloc (usb_dev); - ed->hwTailP = m32_swap (td); + ed->hwTailP = m32_swap ((unsigned long)td); ed->hwHeadP = ed->hwTailP; ed->state = ED_UNLINK; ed->type = usb_pipetype (pipe); @@ -654,13 +698,12 @@ static void td_fill (ohci_t *ohci, unsigned int info, data = 0; td->hwINFO = m32_swap (info); - td->hwCBP = m32_swap (data); + td->hwCBP = m32_swap ((unsigned long)data); if (data) - td->hwBE = m32_swap (data + len - 1); + td->hwBE = m32_swap ((unsigned long)(data + len - 1)); else td->hwBE = 0; - td->hwNextTD = m32_swap (td_pt); - td->hwPSW [0] = m16_swap (((__u32)data & 0x0FFF) | 0xE000); + td->hwNextTD = m32_swap ((unsigned long)td_pt); /* append to queue */ td->ed->hwTailP = td->hwNextTD; @@ -789,6 +832,9 @@ static td_t * dl_reverse_done_list (ohci_t *ohci) } else td_list->ed->hwHeadP &= m32_swap (0xfffffff2); } +#ifdef CONFIG_MPC5200 + td_list->hwNextTD = 0; +#endif } td_list->next_dl_td = td_rev; @@ -828,6 +874,21 @@ static int dl_done_list (ohci_t *ohci, td_t *td_list) stat = cc_to_error[cc]; } + /* see if this done list makes for all TD's of current URB, + * and mark the URB finished if so */ + if (++(lurb_priv->td_cnt) == lurb_priv->length) { +#if 1 + if ((ed->state & (ED_OPER | ED_UNLINK)) && + (lurb_priv->state != URB_DEL)) +#else + if ((ed->state & (ED_OPER | ED_UNLINK))) + urb_finished = 1; + else + dbg("dl_done_list: strange.., ED state %x, ed->state\n"); + } else + dbg("dl_done_list: processing TD %x, len %x\n", lurb_priv->td_cnt, + lurb_priv->length); +#endif if (ed->state != ED_NEW) { edHeadP = m32_swap (ed->hwHeadP) & 0xfffffff0; edTailP = m32_swap (ed->hwTailP); @@ -974,7 +1035,6 @@ int rh_check_port_status(ohci_t *controller) #ifdef CONFIG_AT91C_PQFP_UHPBUG ndp = (ndp == 2) ? 1:0; #endif - for (i = 0; i < ndp; i++) { temp = roothub_portstatus (controller, i); /* check for a device disconnect */ @@ -1014,9 +1074,15 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe)); } bmRType_bReq = cmd->requesttype | (cmd->request << 8); +#if defined(CONFIG_440EP) || defined(CONFIG_MPC5200) + wValue = __swap_16(cmd->value); + wIndex = __swap_16(cmd->index); + wLength = __swap_16(cmd->length); +#else wValue = m16_swap (cmd->value); wIndex = m16_swap (cmd->index); wLength = m16_swap (cmd->length); +#endif /* CONFIG_440EP || CONFIG_MPC5200 */ info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x", dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength); @@ -1030,6 +1096,20 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe)); RH_OTHER | RH_CLASS almost ever means HUB_PORT here */ +#if defined(CONFIG_440EP) || defined(CONFIG_MPC5200) + case RH_GET_STATUS: + *(__u16 *) data_buf = __swap_16(1); OK (2); + case RH_GET_STATUS | RH_INTERFACE: + *(__u16 *) data_buf = __swap_16(0); OK (2); + case RH_GET_STATUS | RH_ENDPOINT: + *(__u16 *) data_buf = __swap_16(0); OK (2); + case RH_GET_STATUS | RH_CLASS: + *(__u32 *) data_buf = __swap_32( + RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE)); + OK (4); + case RH_GET_STATUS | RH_OTHER | RH_CLASS: + *(__u32 *) data_buf = __swap_32(RD_RH_PORTSTAT); OK (4); +#else case RH_GET_STATUS: *(__u16 *) data_buf = m16_swap (1); OK (2); case RH_GET_STATUS | RH_INTERFACE: @@ -1042,6 +1122,7 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe)); OK (4); case RH_GET_STATUS | RH_OTHER | RH_CLASS: *(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4); +#endif /* CONFIG_440EP || CONFIG_MPC5200 */ case RH_CLEAR_FEATURE | RH_ENDPOINT: switch (wValue) { @@ -1088,7 +1169,9 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe)); WR_RH_PORTSTAT (RH_PS_PRS); OK (0); case (RH_PORT_POWER): - WR_RH_PORTSTAT (RH_PS_PPS ); OK (0); + WR_RH_PORTSTAT (RH_PS_PPS ); + wait_ms(100); + OK (0); case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/ if (RD_RH_PORTSTAT & RH_PS_CCS) WR_RH_PORTSTAT (RH_PS_PES ); @@ -1170,7 +1253,7 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe)); } len = min_t(unsigned int, leni, - min_t(unsigned int, data_buf [0], wLength)); + min_t(unsigned int, data_buf [0], wLength)); OK (len); } @@ -1240,8 +1323,10 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer, return -1; } +#if 0 wait_ms(10); /* ohci_dump_status(&gohci); */ +#endif /* allow more time for a BULK device to react - some are slow */ #define BULK_TO 5000 /* timeout in milliseconds */ @@ -1258,39 +1343,32 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer, stat = USB_ST_CRC_ERR; break; } - if (stat >= 0 && stat != 0xff) { + + /* NOTE: since we are not interrupt driven in U-Boot and always + * handle only one URB at a time, we cannot assume the + * transaction finished on the first successful return from + * hc_interrupt().. unless the flag for current URB is set, + * meaning that all TD's to/from device got actually + * transferred and processed. If the current URB is not + * finished we need to re-iterate this loop so as + * hc_interrupt() gets called again as there needs to be some + * more TD's to process still */ + if ((stat >= 0) && (stat != 0xff) && (urb_finished)) { /* 0xff is returned for an SF-interrupt */ break; } + if (--timeout) { wait_ms(1); } else { err("CTL:TIMEOUT "); + dbg("submit_common_msg: TO status %x\n", stat); + stat = USB_ST_CRC_ERR; + urb_finished = 1; stat = USB_ST_CRC_ERR; break; } } - /* we got an Root Hub Status Change interrupt */ - if (got_rhsc) { -#ifdef DEBUG - ohci_dump_roothub (&gohci, 1); -#endif - got_rhsc = 0; - /* abuse timeout */ - timeout = rh_check_port_status(&gohci); - if (timeout >= 0) { -#if 0 /* this does nothing useful, but leave it here in case that changes */ - /* the called routine adds 1 to the passed value */ - usb_hub_port_connect_change(gohci.rh.dev, timeout - 1); -#endif - /* - * XXX - * This is potentially dangerous because it assumes - * that only one device is ever plugged in! - */ - devgone = dev; - } - } dev->status = stat; dev->act_len = transfer_len; @@ -1381,7 +1459,8 @@ static int hc_reset (ohci_t *ohci) readl(&ohci->regs->control)); /* Reset USB (needed by some controllers) */ - writel (0, &ohci->regs->control); + ohci->hc_control = 0; + writel (ohci->hc_control, &ohci->regs->control); /* HC Reset requires max 10 us delay */ writel (OHCI_HCR, &ohci->regs->cmdstatus); @@ -1460,24 +1539,30 @@ static int hc_start (ohci_t * ohci) /* an interrupt happens */ -static int -hc_interrupt (void) +static int hc_interrupt (void) { ohci_t *ohci = &gohci; struct ohci_regs *regs = ohci->regs; int ints; int stat = -1; - if ((ohci->hcca->done_head != 0) && !(m32_swap (ohci->hcca->done_head) & 0x01)) { - ints = OHCI_INTR_WDH; - } else { - ints = readl (®s->intrstatus); + if ((ohci->hcca->done_head != 0) && + !(m32_swap (ohci->hcca->done_head) & 0x01)) { + ints = OHCI_INTR_WDH; + } else if ((ints = readl (®s->intrstatus)) == ~(u32)0) { + ohci->disabled++; + err ("%s device removed!", ohci->slot_name); + return -1; + } else if ((ints &= readl (®s->intrenable)) == 0) { + dbg("hc_interrupt: returning..\n"); + return 0xff; } /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */ if (ints & OHCI_INTR_RHSC) { got_rhsc = 1; + stat = 0xff; } if (ints & OHCI_INTR_UE) { @@ -1549,12 +1634,18 @@ static char ohci_inited = 0; int usb_lowlevel_init(void) { - /* - * Enable USB host clock. - */ - *AT91C_PMC_SCER = AT91C_PMC_UHP; /* 48MHz clock enabled for UHP */ - *AT91C_PMC_PCER = 1 << AT91C_ID_UHP; /* Peripheral Clock Enable Register */ +#ifdef CFG_USB_OHCI_CPU_INIT + /* cpu dependant init */ + if(usb_cpu_init()) + return -1; +#endif + +#ifdef CFG_USB_OHCI_BOARD_INIT + /* board dependant init */ + if(usb_board_init()) + return -1; +#endif memset (&gohci, 0, sizeof (ohci_t)); memset (&urb_priv, 0, sizeof (urb_priv_t)); @@ -1582,29 +1673,42 @@ int usb_lowlevel_init(void) gohci.disabled = 1; gohci.sleeping = 0; gohci.irq = -1; - gohci.regs = (struct ohci_regs *)AT91_USB_HOST_BASE; + gohci.regs = (struct ohci_regs *)CFG_USB_OHCI_REGS_BASE; gohci.flags = 0; - gohci.slot_name = "at91rm9200"; + gohci.slot_name = CFG_USB_OHCI_SLOT_NAME; if (hc_reset (&gohci) < 0) { hc_release_ohci (&gohci); - /* Initialization failed */ - *AT91C_PMC_PCER = AT91C_ID_UHP; - *AT91C_PMC_SCDR = 1 << AT91C_PMC_UHP; /* 48MHz clock disabled for UHP */ + err ("can't reset usb-%s", gohci.slot_name); +#ifdef CFG_USB_OHCI_BOARD_INIT + /* board dependant cleanup */ + usb_board_init_fail(); +#endif + +#ifdef CFG_USB_OHCI_CPU_INIT + /* cpu dependant cleanup */ + usb_cpu_init_fail(); +#endif return -1; } /* FIXME this is a second HC reset; why?? */ -/* writel (gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control); - wait_ms (10);*/ - + /* writel(gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control); + wait_ms(10); */ if (hc_start (&gohci) < 0) { err ("can't start usb-%s", gohci.slot_name); hc_release_ohci (&gohci); /* Initialization failed */ - *AT91C_PMC_PCER = AT91C_ID_UHP; - *AT91C_PMC_SCDR = 1 << AT91C_PMC_UHP; /* 48MHz clock disabled for UHP */ +#ifdef CFG_USB_OHCI_BOARD_INIT + /* board dependant cleanup */ + usb_board_stop(); +#endif + +#ifdef CFG_USB_OHCI_CPU_INIT + /* cpu dependant cleanup */ + usb_cpu_stop(); +#endif return -1; } @@ -1612,6 +1716,7 @@ int usb_lowlevel_init(void) ohci_dump (&gohci, 1); #else wait_ms(1); + urb_finished = 1; #endif ohci_inited = 1; return 0; @@ -1626,10 +1731,19 @@ int usb_lowlevel_stop(void) /* TODO release any interrupts, etc. */ /* call hc_release_ohci() here ? */ hc_reset (&gohci); - /* may not want to do this */ - *AT91C_PMC_PCER = 1 << AT91C_ID_UHP; - *AT91C_PMC_SCDR = 1 << AT91C_PMC_UHP; /* 48MHz clock disabled for UHP */ + +#ifdef CFG_USB_OHCI_BOARD_INIT + /* board dependant cleanup */ + if(usb_board_stop()) + return -1; +#endif + +#ifdef CFG_USB_OHCI_CPU_INIT + /* cpu dependant cleanup */ + if(usb_cpu_stop()) + return -1; +#endif + return 0; } - -#endif /* CONFIG_USB_OHCI */ +#endif /* CONFIG_USB_OHCI_NEW */ diff --git a/cpu/arm920t/at91rm9200/usb_ohci.h b/drivers/usb_ohci.h index ecb4e93..95fbc44 100644 --- a/cpu/arm920t/at91rm9200/usb_ohci.h +++ b/drivers/usb_ohci.h @@ -7,6 +7,15 @@ * usb-ohci.h */ +/* functions for doing board or CPU specific setup/cleanup */ +extern int usb_board_init(void); +extern int usb_board_stop(void); +extern int usb_cpu_init_fail(void); + +extern int usb_cpu_init(void); +extern int usb_cpu_stop(void); +extern int usb_cpu_init_fail(void); + static int cc_to_error[16] = { @@ -104,7 +113,9 @@ struct td { __u32 hwNextTD; /* Next TD Pointer */ __u32 hwBE; /* Memory Buffer End Pointer */ +/* #ifndef CONFIG_MPC5200 /\* this seems wrong *\/ */ __u16 hwPSW[MAXPSW]; +/* #endif */ __u8 unused; __u8 index; struct ed *ed; @@ -128,8 +139,13 @@ typedef struct td td_t; #define NUM_INTS 32 /* part of the OHCI standard */ struct ohci_hcca { __u32 int_table[NUM_INTS]; /* Interrupt ED table */ +#if defined(CONFIG_MPC5200) + __u16 pad1; /* set to 0 on each frame_no change */ + __u16 frame_no; /* current frame number */ +#else __u16 frame_no; /* current frame number */ __u16 pad1; /* set to 0 on each frame_no change */ +#endif __u32 done_head; /* info returned for an interrupt */ u8 reserved_for_hc[116]; } __attribute((aligned(256))); @@ -138,7 +154,9 @@ struct ohci_hcca { /* * Maximum number of root hub ports. */ -#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports */ +#ifndef CFG_USB_OHCI_MAX_ROOT_PORTS +# error "CFG_USB_OHCI_MAX_ROOT_PORTS undefined!" +#endif /* * This is the structure of the OHCI controller's memory mapped I/O @@ -172,7 +190,7 @@ struct ohci_regs { __u32 a; __u32 b; __u32 status; - __u32 portstatus[MAX_ROOT_PORTS]; + __u32 portstatus[CFG_USB_OHCI_MAX_ROOT_PORTS]; } roothub; } __attribute((aligned(32))); diff --git a/drivers/usbdcore_ep0.c b/drivers/usbdcore_ep0.c index 260befe..1e44f32 100644 --- a/drivers/usbdcore_ep0.c +++ b/drivers/usbdcore_ep0.c @@ -2,6 +2,9 @@ * (C) Copyright 2003 * Gerry Hamel, geh@ti.com, Texas Instruments * + * (C) Copyright 2006 + * Bryan O'Donoghue, deckard@CodeHermit.ie + * * Based on * linux/drivers/usbd/ep0.c * @@ -39,11 +42,17 @@ * function driver. This may need to change. * * XXX + * + * As alluded to above, a simple callback cdc_recv_setup has been implemented + * in the usb_device data structure to facilicate passing + * Common Device Class packets to a function driver. + * + * XXX */ #include <common.h> -#if defined(CONFIG_OMAP1510) && defined(CONFIG_USB_DEVICE) +#if defined(CONFIG_USB_DEVICE) #include "usbdcore.h" #if 0 @@ -69,7 +78,7 @@ static int ep0_get_status (struct usb_device_instance *device, char *cp; urb->actual_length = 2; - cp = urb->buffer; + cp = (char*)urb->buffer; cp[0] = cp[1] = 0; switch (requesttype) { @@ -115,7 +124,7 @@ static int ep0_get_one (struct usb_device_instance *device, struct urb *urb, * * Copy configuration data to urb transfer buffer if there is room for it. */ -static void copy_config (struct urb *urb, void *data, int max_length, +void copy_config (struct urb *urb, void *data, int max_length, int max_buf) { int available; @@ -128,10 +137,7 @@ static void copy_config (struct urb *urb, void *data, int max_length, dbg_ep0 (1, "data is NULL"); return; } - if (!(length = *(unsigned char *) data)) { - dbg_ep0 (1, "length is zero"); - return; - } + length = max_length; if (length > max_length) { dbg_ep0 (1, "length: %d >= max_length: %d", length, @@ -192,7 +198,7 @@ static int ep0_get_descriptor (struct usb_device_instance *device, /* setup tx urb */ urb->actual_length = 0; - cp = urb->buffer; + cp = (char*)urb->buffer; dbg_ep0 (2, "%s", USBD_DEVICE_DESCRIPTORS (descriptor_type)); @@ -200,7 +206,6 @@ static int ep0_get_descriptor (struct usb_device_instance *device, case USB_DESCRIPTOR_TYPE_DEVICE: { struct usb_device_descriptor *device_descriptor; - if (! (device_descriptor = usbd_device_device_descriptor (device, port))) { @@ -214,20 +219,16 @@ static int ep0_get_descriptor (struct usb_device_instance *device, /* correct the correct control endpoint 0 max packet size into the descriptor */ device_descriptor = (struct usb_device_descriptor *) urb->buffer; - device_descriptor->bMaxPacketSize0 = - urb->device->bus->maxpacketsize; } - /*dbg_ep0(3, "copied device configuration, actual_length: %x", urb->actual_length); */ + dbg_ep0(3, "copied device configuration, actual_length: 0x%x", urb->actual_length); break; case USB_DESCRIPTOR_TYPE_CONFIGURATION: { - int bNumInterface; struct usb_configuration_descriptor *configuration_descriptor; struct usb_device_descriptor *device_descriptor; - if (! (device_descriptor = usbd_device_device_descriptor (device, port))) { @@ -251,130 +252,35 @@ static int ep0_get_descriptor (struct usb_device_instance *device, index); return -1; } + dbg_ep0(0, "attempt to copy %d bytes to urb\n",cpu_to_le16(configuration_descriptor->wTotalLength)); copy_config (urb, configuration_descriptor, - sizeof (struct - usb_configuration_descriptor), - max); - - - /* iterate across interfaces for specified configuration */ - dbg_ep0 (0, "bNumInterfaces: %d", - configuration_descriptor->bNumInterfaces); - for (bNumInterface = 0; - bNumInterface < - configuration_descriptor->bNumInterfaces; - bNumInterface++) { - int bAlternateSetting; - struct usb_interface_instance - *interface_instance; - - dbg_ep0 (3, "[%d] bNumInterfaces: %d", - bNumInterface, - configuration_descriptor->bNumInterfaces); - - if (! (interface_instance = usbd_device_interface_instance (device, - port, index, bNumInterface))) - { - dbg_ep0 (3, "[%d] interface_instance NULL", - bNumInterface); - return -1; - } - /* iterate across interface alternates */ - for (bAlternateSetting = 0; - bAlternateSetting < interface_instance->alternates; - bAlternateSetting++) { - /*int class; */ - int bNumEndpoint; - struct usb_interface_descriptor *interface_descriptor; - - struct usb_alternate_instance *alternate_instance; - - dbg_ep0 (3, "[%d:%d] alternates: %d", - bNumInterface, - bAlternateSetting, - interface_instance->alternates); - - if (! (alternate_instance = usbd_device_alternate_instance (device, port, index, bNumInterface, bAlternateSetting))) { - dbg_ep0 (3, "[%d] alternate_instance NULL", - bNumInterface); - return -1; - } - /* copy descriptor for this interface */ - copy_config (urb, alternate_instance->interface_descriptor, - sizeof (struct usb_interface_descriptor), - max); - - /*dbg_ep0(3, "[%d:%d] classes: %d endpoints: %d", bNumInterface, bAlternateSetting, */ - /* alternate_instance->classes, alternate_instance->endpoints); */ - - /* iterate across classes for this alternate interface */ -#if 0 - for (class = 0; - class < alternate_instance->classes; - class++) { - struct usb_class_descriptor *class_descriptor; - /*dbg_ep0(3, "[%d:%d:%d] classes: %d", bNumInterface, bAlternateSetting, */ - /* class, alternate_instance->classes); */ - if (!(class_descriptor = usbd_device_class_descriptor_index (device, port, index, bNumInterface, bAlternateSetting, class))) { - dbg_ep0 (3, "[%d] class NULL", - class); - return -1; - } - /* copy descriptor for this class */ - copy_config (urb, class_descriptor, - sizeof (struct usb_class_descriptor), - max); - } -#endif - - /* iterate across endpoints for this alternate interface */ - interface_descriptor = alternate_instance->interface_descriptor; - for (bNumEndpoint = 0; - bNumEndpoint < alternate_instance->endpoints; - bNumEndpoint++) { - struct usb_endpoint_descriptor *endpoint_descriptor; - dbg_ep0 (3, "[%d:%d:%d] endpoint: %d", - bNumInterface, - bAlternateSetting, - bNumEndpoint, - interface_descriptor-> - bNumEndpoints); - if (!(endpoint_descriptor = usbd_device_endpoint_descriptor_index (device, port, index, bNumInterface, bAlternateSetting, bNumEndpoint))) { - dbg_ep0 (3, "[%d] endpoint NULL", - bNumEndpoint); - return -1; - } - /* copy descriptor for this endpoint */ - copy_config (urb, endpoint_descriptor, - sizeof (struct usb_endpoint_descriptor), - max); - } - } - } - dbg_ep0 (3, "lengths: %d %d", - le16_to_cpu (configuration_descriptor->wTotalLength), - urb->actual_length); + cpu_to_le16(configuration_descriptor->wTotalLength), + max); } + break; case USB_DESCRIPTOR_TYPE_STRING: { struct usb_string_descriptor *string_descriptor; - if (!(string_descriptor = usbd_get_string (index))) { + serial_printf("Invalid string index %d\n", index); return -1; } - /*dbg_ep0(3, "string_descriptor: %p", string_descriptor); */ + dbg_ep0(3, "string_descriptor: %p length %d", string_descriptor, string_descriptor->bLength); copy_config (urb, string_descriptor, string_descriptor->bLength, max); } break; case USB_DESCRIPTOR_TYPE_INTERFACE: + serial_printf("USB_DESCRIPTOR_TYPE_INTERFACE - error not implemented\n"); return -1; case USB_DESCRIPTOR_TYPE_ENDPOINT: + serial_printf("USB_DESCRIPTOR_TYPE_ENDPOINT - error not implemented\n"); return -1; case USB_DESCRIPTOR_TYPE_HID: { + serial_printf("USB_DESCRIPTOR_TYPE_HID - error not implemented\n"); return -1; /* unsupported at this time */ #if 0 int bNumInterface = @@ -403,6 +309,7 @@ static int ep0_get_descriptor (struct usb_device_instance *device, break; case USB_DESCRIPTOR_TYPE_REPORT: { + serial_printf("USB_DESCRIPTOR_TYPE_REPORT - error not implemented\n"); return -1; /* unsupported at this time */ #if 0 int bNumInterface = @@ -434,12 +341,19 @@ static int ep0_get_descriptor (struct usb_device_instance *device, #endif } break; + case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER: + { + /* If a USB device supports both a full speed and low speed operation + * we must send a Device_Qualifier descriptor here + */ + return -1; + } default: return -1; } - dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d packet size: %2d", + dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d tx_packetSize: %2d", urb->buffer, urb->buffer_length, urb->actual_length, device->bus->endpoint_array[0].tx_packetSize); /* @@ -495,6 +409,12 @@ int ep0_recv_setup (struct urb *urb) /* handle USB Standard Request (c.f. USB Spec table 9-2) */ if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) { + if(device->device_state <= STATE_CONFIGURED){ + /* Attempt to handle a CDC specific request if we are + * in the configured state. + */ + return device->cdc_recv_setup(request,urb); + } dbg_ep0 (1, "non standard request: %x", request->bmRequestType & USB_REQ_TYPE_MASK); return -1; /* Stall here */ @@ -567,6 +487,7 @@ int ep0_recv_setup (struct urb *urb) le16_to_cpu (request->wValue) & 0xff); case USB_REQ_GET_CONFIGURATION: + serial_printf("get config %d\n", device->configuration); return ep0_get_one (device, urb, device->configuration); @@ -642,7 +563,6 @@ int ep0_recv_setup (struct urb *urb) /*dbg_ep0(2, "address: %d %d %d", */ /* request->wValue, le16_to_cpu(request->wValue), device->address); */ - serial_printf ("DEVICE_ADDRESS_ASSIGNED.. event?\n"); return 0; case USB_REQ_SET_DESCRIPTOR: /* XXX should we support this? */ @@ -653,9 +573,10 @@ int ep0_recv_setup (struct urb *urb) /* c.f. 9.4.7 - the top half of wValue is reserved */ /* */ if ((device->configuration = - le16_to_cpu (request->wValue) & 0x7f) != 0) { + le16_to_cpu (request->wValue) & 0xFF80) != 0) { /* c.f. 9.4.7 - zero is the default or addressed state, in our case this */ /* is the same is configuration zero */ + serial_printf("error setting dev->config to zero!\n"); device->configuration = 0; /* TBR - ?????? */ } /* reset interface and alternate settings */ diff --git a/drivers/usbdcore_mpc8xx.c b/drivers/usbdcore_mpc8xx.c new file mode 100644 index 0000000..e87284b --- /dev/null +++ b/drivers/usbdcore_mpc8xx.c @@ -0,0 +1,1400 @@ +/* + * Copyright (C) 2006 by Bryan O'Donoghue, CodeHermit + * bodonoghue@CodeHermit.ie + * + * References + * DasUBoot/drivers/usbdcore_omap1510.c, for design and implementation ideas. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +/* + * Notes : + * 1. #define __SIMULATE_ERROR__ to inject a CRC error into every 2nd TX + * packet to force the USB re-transmit protocol. + * + * 2. #define __DEBUG_UDC__ to switch on debug tracing to serial console + * be careful that tracing doesn't create Hiesen-bugs with respect to + * response timeouts to control requests. + * + * 3. This driver should be able to support any higher level driver that + * that wants to do either of the two standard UDC implementations + * Control-Bulk-Interrupt or Bulk-IN/Bulk-Out standards. Hence + * gserial and cdc_acm should work with this code. + * + * 4. NAK events never actually get raised at all, the documentation + * is just wrong ! + * + * 5. For some reason, cbd_datlen is *always* +2 the value it should be. + * this means that having an RX cbd of 16 bytes is not possible, since + * the same size is reported for 14 bytes received as 16 bytes received + * until we can find out why this happens, RX cbds must be limited to 8 + * bytes. TODO: check errata for this behaviour. + * + * 6. Right now this code doesn't support properly powering up with the USB + * cable attached to the USB host my development board the Adder87x doesn't + * have a pull-up fitted to allow this, so it is necessary to power the + * board and *then* attached the USB cable to the host. However somebody + * with a different design in their board may be able to keep the cable + * constantly connected and simply enable/disable a pull-up re + * figure 31.1 in MPC885RM.pdf instead of having to power up the board and + * then attach the cable ! + * + */ +#include <common.h> +#include <config.h> + +#if defined(CONFIG_MPC885_FAMILY) && defined(CONFIG_USB_DEVICE) +#include <commproc.h> +#include "usbdcore.h" +#include "usbdcore_mpc8xx.h" +#include "usbdcore_ep0.h" + +#define ERR(fmt, args...)\ + serial_printf("ERROR : [%s] %s:%d: "fmt,\ + __FILE__,__FUNCTION__,__LINE__, ##args) +#ifdef __DEBUG_UDC__ +#define DBG(fmt,args...)\ + serial_printf("[%s] %s:%d: "fmt,\ + __FILE__,__FUNCTION__,__LINE__, ##args) +#else +#define DBG(fmt,args...) +#endif + +/* Static Data */ +#ifdef __SIMULATE_ERROR__ +static char err_poison_test = 0; +#endif +static struct mpc8xx_ep ep_ref[MAX_ENDPOINTS]; +static u32 address_base = STATE_NOT_READY; +static mpc8xx_udc_state_t udc_state = 0; +static struct usb_device_instance *udc_device = 0; +static volatile usb_epb_t *endpoints[MAX_ENDPOINTS]; +static volatile cbd_t *tx_cbd[TX_RING_SIZE]; +static volatile cbd_t *rx_cbd[RX_RING_SIZE]; +static volatile immap_t *immr = 0; +static volatile cpm8xx_t *cp = 0; +static volatile usb_pram_t *usb_paramp = 0; +static volatile usb_t *usbp = 0; +static int rx_ct = 0; +static int tx_ct = 0; + +/* Static Function Declarations */ +static void mpc8xx_udc_state_transition_up (usb_device_state_t initial, + usb_device_state_t final); +static void mpc8xx_udc_state_transition_down (usb_device_state_t initial, + usb_device_state_t final); +static void mpc8xx_udc_stall (unsigned int ep); +static void mpc8xx_udc_flush_tx_fifo (int epid); +static void mpc8xx_udc_flush_rx_fifo (void); +static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp); +static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi, + struct urb *tx_urb); +static void mpc8xx_udc_dump_request (struct usb_device_request *request); +static void mpc8xx_udc_clock_init (volatile immap_t * immr, + volatile cpm8xx_t * cp); +static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi); +static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp); +static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp); +static void mpc8xx_udc_cbd_init (void); +static void mpc8xx_udc_endpoint_init (void); +static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size); +static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment); +static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp); +static void mpc8xx_udc_set_nak (unsigned int ep); +static short mpc8xx_udc_handle_txerr (void); +static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid); + +/****************************************************************************** + Global Linkage + *****************************************************************************/ + +/* udc_init + * + * Do initial bus gluing + */ +int udc_init (void) +{ + /* Init various pointers */ + immr = (immap_t *) CFG_IMMR; + cp = (cpm8xx_t *) & (immr->im_cpm); + usb_paramp = (usb_pram_t *) & (cp->cp_dparam[PROFF_USB]); + usbp = (usb_t *) & (cp->cp_scc[0]); + + memset (ep_ref, 0x00, (sizeof (struct mpc8xx_ep) * MAX_ENDPOINTS)); + + udc_device = 0; + udc_state = STATE_NOT_READY; + + usbp->usmod = 0x00; + usbp->uscom = 0; + + /* Set USB Frame #0, Respond at Address & Get a clock source */ + usbp->usaddr = 0x00; + mpc8xx_udc_clock_init (immr, cp); + + /* PA15, PA14 as perhiperal USBRXD and USBOE */ + immr->im_ioport.iop_padir &= ~0x0003; + immr->im_ioport.iop_papar |= 0x0003; + + /* PC11/PC10 as peripheral USBRXP USBRXN */ + immr->im_ioport.iop_pcso |= 0x0030; + + /* PC7/PC6 as perhiperal USBTXP and USBTXN */ + immr->im_ioport.iop_pcdir |= 0x0300; + immr->im_ioport.iop_pcpar |= 0x0300; + + /* Set the base address */ + address_base = (u32) (cp->cp_dpmem + CPM_USB_BASE); + + /* Initialise endpoints and circular buffers */ + mpc8xx_udc_endpoint_init (); + mpc8xx_udc_cbd_init (); + + /* Assign allocated Dual Port Endpoint descriptors */ + usb_paramp->ep0ptr = (u32) endpoints[0]; + usb_paramp->ep1ptr = (u32) endpoints[1]; + usb_paramp->ep2ptr = (u32) endpoints[2]; + usb_paramp->ep3ptr = (u32) endpoints[3]; + usb_paramp->frame_n = 0; + + DBG ("ep0ptr=0x%08x ep1ptr=0x%08x ep2ptr=0x%08x ep3ptr=0x%08x\n", + usb_paramp->ep0ptr, usb_paramp->ep1ptr, usb_paramp->ep2ptr, + usb_paramp->ep3ptr); + + return 0; +} + +/* udc_irq + * + * Poll for whatever events may have occured + */ +void udc_irq (void) +{ + int epid = 0; + volatile cbd_t *rx_cbdp = 0; + volatile cbd_t *rx_cbdp_base = 0; + + if (udc_state != STATE_READY) { + return; + } + + if (usbp->usber & USB_E_BSY) { + /* This shouldn't happen. If it does then it's a bug ! */ + usbp->usber |= USB_E_BSY; + mpc8xx_udc_flush_rx_fifo (); + } + + /* Scan all RX/Bidirectional Endpoints for RX data. */ + for (epid = 0; epid < MAX_ENDPOINTS; epid++) { + if (!ep_ref[epid].prx) { + continue; + } + rx_cbdp = rx_cbdp_base = ep_ref[epid].prx; + + do { + if (!(rx_cbdp->cbd_sc & RX_BD_E)) { + + if (rx_cbdp->cbd_sc & 0x1F) { + /* Corrupt data discard it. + * Controller has NAK'd this packet. + */ + mpc8xx_udc_clear_rxbd (rx_cbdp); + + } else { + if (!epid) { + mpc8xx_udc_ep0_rx (rx_cbdp); + + } else { + /* Process data */ + mpc8xx_udc_set_nak (epid); + mpc8xx_udc_epn_rx (epid, rx_cbdp); + mpc8xx_udc_clear_rxbd (rx_cbdp); + } + } + + /* Advance RX CBD pointer */ + mpc8xx_udc_advance_rx (&rx_cbdp, epid); + ep_ref[epid].prx = rx_cbdp; + } else { + /* Advance RX CBD pointer */ + mpc8xx_udc_advance_rx (&rx_cbdp, epid); + } + + } while (rx_cbdp != rx_cbdp_base); + } + + /* Handle TX events as appropiate, the correct place to do this is + * in a tx routine. Perhaps TX on epn was pre-empted by ep0 + */ + + if (usbp->usber & USB_E_TXB) { + usbp->usber |= USB_E_TXB; + } + + if (usbp->usber & (USB_TX_ERRMASK)) { + mpc8xx_udc_handle_txerr (); + } + + /* Switch to the default state, respond at the default address */ + if (usbp->usber & USB_E_RESET) { + usbp->usber |= USB_E_RESET; + usbp->usaddr = 0x00; + udc_device->device_state = STATE_DEFAULT; + } + + /* if(usbp->usber&USB_E_IDLE){ + We could suspend here ! + usbp->usber|=USB_E_IDLE; + DBG("idle state change\n"); + } + if(usbp->usbs){ + We could resume here when IDLE is deasserted ! + Not worth doing, so long as we are self powered though. + } + */ + + return; +} + +/* udc_endpoint_write + * + * Write some data to an endpoint + */ +int udc_endpoint_write (struct usb_endpoint_instance *epi) +{ + int ep = 0; + short epid = 1, unnak = 0, ret = 0; + + if (udc_state != STATE_READY) { + ERR ("invalid udc_state != STATE_READY!\n"); + return -1; + } + + if (!udc_device || !epi) { + return -1; + } + + if (udc_device->device_state != STATE_CONFIGURED) { + return -1; + } + + ep = epi->endpoint_address & 0x03; + if (ep >= MAX_ENDPOINTS) { + return -1; + } + + /* Set NAK for all RX endpoints during TX */ + for (epid = 1; epid < MAX_ENDPOINTS; epid++) { + + /* Don't set NAK on DATA IN/CONTROL endpoints */ + if (ep_ref[epid].sc & USB_DIR_IN) { + continue; + } + + if (!(usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK))) { + unnak |= 1 << epid; + } + + mpc8xx_udc_set_nak (epid); + } + + mpc8xx_udc_init_tx (&udc_device->bus->endpoint_array[ep], + epi->tx_urb); + ret = mpc8xx_udc_ep_tx (&udc_device->bus->endpoint_array[ep]); + + /* Remove temporary NAK */ + for (epid = 1; epid < MAX_ENDPOINTS; epid++) { + if (unnak & (1 << epid)) { + udc_unset_nak (epid); + } + } + + return ret; +} + +/* mpc8xx_udc_assign_urb + * + * Associate a given urb to an endpoint TX or RX transmit/receive buffers + */ +static int mpc8xx_udc_assign_urb (int ep, char direction) +{ + struct usb_endpoint_instance *epi = 0; + + if (ep >= MAX_ENDPOINTS) { + goto err; + } + epi = &udc_device->bus->endpoint_array[ep]; + if (!epi) { + goto err; + } + + if (!ep_ref[ep].urb) { + ep_ref[ep].urb = usbd_alloc_urb (udc_device, udc_device->bus->endpoint_array); + if (!ep_ref[ep].urb) { + goto err; + } + } else { + ep_ref[ep].urb->actual_length = 0; + } + + switch (direction) { + case USB_DIR_IN: + epi->tx_urb = ep_ref[ep].urb; + break; + case USB_DIR_OUT: + epi->rcv_urb = ep_ref[ep].urb; + break; + default: + goto err; + } + return 0; + + err: + udc_state = STATE_ERROR; + return -1; +} + +/* udc_setup_ep + * + * Associate U-Boot software endpoints to mpc8xx endpoint parameter ram + * Isochronous endpoints aren't yet supported! + */ +void udc_setup_ep (struct usb_device_instance *device, unsigned int ep, + struct usb_endpoint_instance *epi) +{ + uchar direction = 0; + int ep_attrib = 0; + + if (epi && (ep < MAX_ENDPOINTS)) { + + if (ep == 0) { + if (epi->rcv_attributes != USB_ENDPOINT_XFER_CONTROL + || epi->tx_attributes != + USB_ENDPOINT_XFER_CONTROL) { + + /* ep0 must be a control endpoint */ + udc_state = STATE_ERROR; + return; + + } + if (!(ep_ref[ep].sc & EP_ATTACHED)) { + mpc8xx_udc_cbd_attach (ep, epi->tx_packetSize, + epi->rcv_packetSize); + } + usbp->usep[ep] = 0x0000; + return; + } + + if ((epi->endpoint_address & USB_ENDPOINT_DIR_MASK) + == USB_DIR_IN) { + + direction = 1; + ep_attrib = epi->tx_attributes; + epi->rcv_packetSize = 0; + ep_ref[ep].sc |= USB_DIR_IN; + } else { + + direction = 0; + ep_attrib = epi->rcv_attributes; + epi->tx_packetSize = 0; + ep_ref[ep].sc &= ~USB_DIR_IN; + } + + if (mpc8xx_udc_assign_urb (ep, epi->endpoint_address + & USB_ENDPOINT_DIR_MASK)) { + return; + } + + switch (ep_attrib) { + case USB_ENDPOINT_XFER_CONTROL: + if (!(ep_ref[ep].sc & EP_ATTACHED)) { + mpc8xx_udc_cbd_attach (ep, + epi->tx_packetSize, + epi->rcv_packetSize); + } + usbp->usep[ep] = ep << 12; + epi->rcv_urb = epi->tx_urb = ep_ref[ep].urb; + + break; + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + if (!(ep_ref[ep].sc & EP_ATTACHED)) { + if (direction) { + mpc8xx_udc_cbd_attach (ep, + epi->tx_packetSize, + 0); + } else { + mpc8xx_udc_cbd_attach (ep, + 0, + epi->rcv_packetSize); + } + } + usbp->usep[ep] = (ep << 12) | ((ep_attrib) << 8); + + break; + case USB_ENDPOINT_XFER_ISOC: + default: + serial_printf ("Error endpoint attrib %d>3\n", ep_attrib); + udc_state = STATE_ERROR; + break; + } + } + +} + +/* udc_connect + * + * Move state, switch on the USB + */ +void udc_connect (void) +{ + /* Enable pull-up resistor on D+ + * TODO: fit a pull-up resistor to drive SE0 for > 2.5us + */ + + if (udc_state != STATE_ERROR) { + udc_state = STATE_READY; + usbp->usmod |= USMOD_EN; + } +} + +/* udc_disconnect + * + * Disconnect is not used but, is included for completeness + */ +void udc_disconnect (void) +{ + /* Disable pull-up resistor on D- + * TODO: fix a pullup resistor to control this + */ + + if (udc_state != STATE_ERROR) { + udc_state = STATE_NOT_READY; + } + usbp->usmod &= ~USMOD_EN; +} + +/* udc_enable + * + * Grab an EP0 URB, register interest in a subset of USB events + */ +void udc_enable (struct usb_device_instance *device) +{ + if (udc_state == STATE_ERROR) { + return; + } + + udc_device = device; + + if (!ep_ref[0].urb) { + ep_ref[0].urb = usbd_alloc_urb (device, device->bus->endpoint_array); + } + + /* Register interest in all events except SOF, enable transceiver */ + usbp->usber = 0x03FF; + usbp->usbmr = 0x02F7; + + return; +} + +/* udc_disable + * + * disable the currently hooked device + */ +void udc_disable (void) +{ + int i = 0; + + if (udc_state == STATE_ERROR) { + DBG ("Won't disable UDC. udc_state==STATE_ERROR !\n"); + return; + } + + udc_device = 0; + + for (; i < MAX_ENDPOINTS; i++) { + if (ep_ref[i].urb) { + usbd_dealloc_urb (ep_ref[i].urb); + ep_ref[i].urb = 0; + } + } + + usbp->usbmr = 0x00; + usbp->usmod = ~USMOD_EN; + udc_state = STATE_NOT_READY; +} + +/* udc_startup_events + * + * Enable the specified device + */ +void udc_startup_events (struct usb_device_instance *device) +{ + udc_enable (device); + if (udc_state == STATE_READY) { + usbd_device_event_irq (device, DEVICE_CREATE, 0); + } +} + +/* udc_set_nak + * + * Allow upper layers to signal lower layers should not accept more RX data + * + */ +void udc_set_nak (int epid) +{ + if (epid) { + mpc8xx_udc_set_nak (epid); + } +} + +/* udc_unset_nak + * + * Suspend sending of NAK tokens for DATA OUT tokens on a given endpoint. + * Switch off NAKing on this endpoint to accept more data output from host. + * + */ +void udc_unset_nak (int epid) +{ + if (epid > MAX_ENDPOINTS) { + return; + } + + if (usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK)) { + usbp->usep[epid] &= ~(USEP_THS_NAK | USEP_RHS_NAK); + __asm__ ("eieio"); + } +} + +/****************************************************************************** + Static Linkage +******************************************************************************/ + +/* udc_state_transition_up + * udc_state_transition_down + * + * Helper functions to implement device state changes. The device states and + * the events that transition between them are: + * + * STATE_ATTACHED + * || /\ + * \/ || + * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET + * || /\ + * \/ || + * STATE_POWERED + * || /\ + * \/ || + * DEVICE_RESET DEVICE_POWER_INTERRUPTION + * || /\ + * \/ || + * STATE_DEFAULT + * || /\ + * \/ || + * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET + * || /\ + * \/ || + * STATE_ADDRESSED + * || /\ + * \/ || + * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED + * || /\ + * \/ || + * STATE_CONFIGURED + * + * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED + * to STATE_CONFIGURED) from the specified initial state to the specified final + * state, passing through each intermediate state on the way. If the initial + * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then + * no state transitions will take place. + * + * udc_state_transition_down transitions down (in the direction from + * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the + * specified final state, passing through each intermediate state on the way. + * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final + * state, then no state transitions will take place. + * + */ + +static void mpc8xx_udc_state_transition_up (usb_device_state_t initial, + usb_device_state_t final) +{ + if (initial < final) { + switch (initial) { + case STATE_ATTACHED: + usbd_device_event_irq (udc_device, + DEVICE_HUB_CONFIGURED, 0); + if (final == STATE_POWERED) + break; + case STATE_POWERED: + usbd_device_event_irq (udc_device, DEVICE_RESET, 0); + if (final == STATE_DEFAULT) + break; + case STATE_DEFAULT: + usbd_device_event_irq (udc_device, + DEVICE_ADDRESS_ASSIGNED, 0); + if (final == STATE_ADDRESSED) + break; + case STATE_ADDRESSED: + usbd_device_event_irq (udc_device, DEVICE_CONFIGURED, + 0); + case STATE_CONFIGURED: + break; + default: + break; + } + } +} + +static void mpc8xx_udc_state_transition_down (usb_device_state_t initial, + usb_device_state_t final) +{ + if (initial > final) { + switch (initial) { + case STATE_CONFIGURED: + usbd_device_event_irq (udc_device, + DEVICE_DE_CONFIGURED, 0); + if (final == STATE_ADDRESSED) + break; + case STATE_ADDRESSED: + usbd_device_event_irq (udc_device, DEVICE_RESET, 0); + if (final == STATE_DEFAULT) + break; + case STATE_DEFAULT: + usbd_device_event_irq (udc_device, + DEVICE_POWER_INTERRUPTION, 0); + if (final == STATE_POWERED) + break; + case STATE_POWERED: + usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, + 0); + case STATE_ATTACHED: + break; + default: + break; + } + } +} + +/* mpc8xx_udc_stall + * + * Force returning of STALL tokens on the given endpoint. Protocol or function + * STALL conditions are permissable here + */ +static void mpc8xx_udc_stall (unsigned int ep) +{ + usbp->usep[ep] |= STALL_BITMASK; +} + +/* mpc8xx_udc_set_nak + * + * Force returning of NAK responses for the given endpoint as a kind of very + * simple flow control + */ +static void mpc8xx_udc_set_nak (unsigned int ep) +{ + usbp->usep[ep] |= NAK_BITMASK; + __asm__ ("eieio"); +} + +/* mpc8xx_udc_handle_txerr + * + * Handle errors relevant to TX. Return a status code to allow calling + * indicative of what if anything happened + */ +static short mpc8xx_udc_handle_txerr () +{ + short ep = 0, ret = 0; + + for (; ep < TX_RING_SIZE; ep++) { + if (usbp->usber & (0x10 << ep)) { + + /* Timeout or underrun */ + if (tx_cbd[ep]->cbd_sc & 0x06) { + ret = 1; + mpc8xx_udc_flush_tx_fifo (ep); + + } else { + if (usbp->usep[ep] & STALL_BITMASK) { + if (!ep) { + usbp->usep[ep] &= ~STALL_BITMASK; + } + } /* else NAK */ + } + usbp->usber |= (0x10 << ep); + } + } + return ret; +} + +/* mpc8xx_udc_advance_rx + * + * Advance cbd rx + */ +static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid) +{ + if ((*rx_cbdp)->cbd_sc & RX_BD_W) { + *rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CFG_IMMR); + + } else { + (*rx_cbdp)++; + } +} + + +/* mpc8xx_udc_flush_tx_fifo + * + * Flush a given TX fifo. Assumes one tx cbd per endpoint + */ +static void mpc8xx_udc_flush_tx_fifo (int epid) +{ + volatile cbd_t *tx_cbdp = 0; + + if (epid > MAX_ENDPOINTS) { + return; + } + + /* TX stop */ + immr->im_cpm.cp_cpcr = ((epid << 2) | 0x1D01); + __asm__ ("eieio"); + while (immr->im_cpm.cp_cpcr & 0x01); + + usbp->uscom = 0x40 | 0; + + /* reset ring */ + tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CFG_IMMR); + tx_cbdp->cbd_sc = (TX_BD_I | TX_BD_W); + + + endpoints[epid]->tptr = endpoints[epid]->tbase; + endpoints[epid]->tstate = 0x00; + endpoints[epid]->tbcnt = 0x00; + + /* TX start */ + immr->im_cpm.cp_cpcr = ((epid << 2) | 0x2D01); + __asm__ ("eieio"); + while (immr->im_cpm.cp_cpcr & 0x01); + + return; +} + +/* mpc8xx_udc_flush_rx_fifo + * + * For the sake of completeness of the namespace, it seems like + * a good-design-decision (tm) to include mpc8xx_udc_flush_rx_fifo(); + * If RX_BD_E is true => a driver bug either here or in an upper layer + * not polling frequently enough. If RX_BD_E is true we have told the host + * we have accepted data but, the CPM found it had no-where to put that data + * which needless to say would be a bad thing. + */ +static void mpc8xx_udc_flush_rx_fifo () +{ + int i = 0; + + for (i = 0; i < RX_RING_SIZE; i++) { + if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) { + ERR ("buf %p used rx data len = 0x%x sc=0x%x!\n", + rx_cbd[i], rx_cbd[i]->cbd_datlen, + rx_cbd[i]->cbd_sc); + + } + } + ERR ("BUG : Input over-run\n"); +} + +/* mpc8xx_udc_clear_rxbd + * + * Release control of RX CBD to CP. + */ +static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp) +{ + rx_cbdp->cbd_datlen = 0x0000; + rx_cbdp->cbd_sc = ((rx_cbdp->cbd_sc & RX_BD_W) | (RX_BD_E | RX_BD_I)); + __asm__ ("eieio"); +} + +/* mpc8xx_udc_tx_irq + * + * Parse for tx timeout, control RX or USB reset/busy conditions + * Return -1 on timeout, -2 on fatal error, else return zero + */ +static int mpc8xx_udc_tx_irq (int ep) +{ + int i = 0; + + if (usbp->usber & (USB_TX_ERRMASK)) { + if (mpc8xx_udc_handle_txerr ()) { + /* Timeout, controlling function must retry send */ + return -1; + } + } + + if (usbp->usber & (USB_E_RESET | USB_E_BSY)) { + /* Fatal, abandon TX transaction */ + return -2; + } + + if (usbp->usber & USB_E_RXB) { + for (i = 0; i < RX_RING_SIZE; i++) { + if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) { + if ((rx_cbd[i] == ep_ref[0].prx) || ep) { + return -2; + } + } + } + } + + return 0; +} + +/* mpc8xx_udc_ep_tx + * + * Transmit in a re-entrant fashion outbound USB packets. + * Implement retry/timeout mechanism described in USB specification + * Toggle DATA0/DATA1 pids as necessary + * Introduces non-standard tx_retry. The USB standard has no scope for slave + * devices to give up TX, however tx_retry stops us getting stuck in an endless + * TX loop. + */ +static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi) +{ + struct urb *urb = epi->tx_urb; + volatile cbd_t *tx_cbdp = 0; + unsigned int ep = 0, pkt_len = 0, x = 0, tx_retry = 0; + int ret = 0; + + if (!epi || (epi->endpoint_address & 0x03) >= MAX_ENDPOINTS || !urb) { + return -1; + } + + ep = epi->endpoint_address & 0x03; + tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR); + + if (tx_cbdp->cbd_sc & TX_BD_R || usbp->usber & USB_E_TXB) { + mpc8xx_udc_flush_tx_fifo (ep); + usbp->usber |= USB_E_TXB; + }; + + while (tx_retry++ < 100) { + ret = mpc8xx_udc_tx_irq (ep); + if (ret == -1) { + /* ignore timeout here */ + } else if (ret == -2) { + /* Abandon TX */ + mpc8xx_udc_flush_tx_fifo (ep); + return -1; + } + + tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR); + while (tx_cbdp->cbd_sc & TX_BD_R) { + }; + tx_cbdp->cbd_sc = (tx_cbdp->cbd_sc & TX_BD_W); + + pkt_len = urb->actual_length - epi->sent; + + if (pkt_len > epi->tx_packetSize || pkt_len > EP_MAX_PKT) { + pkt_len = MIN (epi->tx_packetSize, EP_MAX_PKT); + } + + for (x = 0; x < pkt_len; x++) { + *((unsigned char *) (tx_cbdp->cbd_bufaddr + x)) = + urb->buffer[epi->sent + x]; + } + tx_cbdp->cbd_datlen = pkt_len; + tx_cbdp->cbd_sc |= (CBD_TX_BITMASK | ep_ref[ep].pid); + __asm__ ("eieio"); + +#ifdef __SIMULATE_ERROR__ + if (++err_poison_test == 2) { + err_poison_test = 0; + tx_cbdp->cbd_sc &= ~TX_BD_TC; + } +#endif + + usbp->uscom = (USCOM_STR | ep); + + while (!(usbp->usber & USB_E_TXB)) { + ret = mpc8xx_udc_tx_irq (ep); + if (ret == -1) { + /* TX timeout */ + break; + } else if (ret == -2) { + if (usbp->usber & USB_E_TXB) { + usbp->usber |= USB_E_TXB; + } + mpc8xx_udc_flush_tx_fifo (ep); + return -1; + } + }; + + if (usbp->usber & USB_E_TXB) { + usbp->usber |= USB_E_TXB; + } + + /* ACK must be present <= 18bit times from TX */ + if (ret == -1) { + continue; + } + + /* TX ACK : USB 2.0 8.7.2, Toggle PID, Advance TX */ + epi->sent += pkt_len; + epi->last = MIN (urb->actual_length - epi->sent, epi->tx_packetSize); + TOGGLE_TX_PID (ep_ref[ep].pid); + + if (epi->sent >= epi->tx_urb->actual_length) { + + epi->tx_urb->actual_length = 0; + epi->sent = 0; + + if (ep_ref[ep].sc & EP_SEND_ZLP) { + ep_ref[ep].sc &= ~EP_SEND_ZLP; + } else { + return 0; + } + } + } + + ERR ("TX fail, endpoint 0x%x tx bytes 0x%x/0x%x\n", ep, epi->sent, + epi->tx_urb->actual_length); + + return -1; +} + +/* mpc8xx_udc_dump_request + * + * Dump a control request to console + */ +static void mpc8xx_udc_dump_request (struct usb_device_request *request) +{ + DBG ("bmRequestType:%02x bRequest:%02x wValue:%04x " + "wIndex:%04x wLength:%04x ?\n", + request->bmRequestType, + request->bRequest, + request->wValue, request->wIndex, request->wLength); + + return; +} + +/* mpc8xx_udc_ep0_rx_setup + * + * Decode received ep0 SETUP packet. return non-zero on error + */ +static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp) +{ + unsigned int x = 0; + struct urb *purb = ep_ref[0].urb; + struct usb_endpoint_instance *epi = + &udc_device->bus->endpoint_array[0]; + + for (; x < rx_cbdp->cbd_datlen; x++) { + *(((unsigned char *) &ep_ref[0].urb->device_request) + x) = + *((unsigned char *) (rx_cbdp->cbd_bufaddr + x)); + } + + mpc8xx_udc_clear_rxbd (rx_cbdp); + + if (ep0_recv_setup (purb)) { + mpc8xx_udc_dump_request (&purb->device_request); + return -1; + } + + if ((purb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK) + == USB_REQ_HOST2DEVICE) { + + switch (purb->device_request.bRequest) { + case USB_REQ_SET_ADDRESS: + /* Send the Status OUT ZLP */ + ep_ref[0].pid = TX_BD_PID_DATA1; + purb->actual_length = 0; + mpc8xx_udc_init_tx (epi, purb); + mpc8xx_udc_ep_tx (epi); + + /* Move to the addressed state */ + usbp->usaddr = udc_device->address; + mpc8xx_udc_state_transition_up (udc_device->device_state, + STATE_ADDRESSED); + return 0; + + case USB_REQ_SET_CONFIGURATION: + if (!purb->device_request.wValue) { + /* Respond at default address */ + usbp->usaddr = 0x00; + mpc8xx_udc_state_transition_down (udc_device->device_state, + STATE_ADDRESSED); + } else { + /* TODO: Support multiple configurations */ + mpc8xx_udc_state_transition_up (udc_device->device_state, + STATE_CONFIGURED); + for (x = 1; x < MAX_ENDPOINTS; x++) { + if ((udc_device->bus->endpoint_array[x].endpoint_address & USB_ENDPOINT_DIR_MASK) + == USB_DIR_IN) { + ep_ref[x].pid = TX_BD_PID_DATA0; + } else { + ep_ref[x].pid = RX_BD_PID_DATA0; + } + /* Set configuration must unstall endpoints */ + usbp->usep[x] &= ~STALL_BITMASK; + } + } + break; + default: + /* CDC/Vendor specific */ + break; + } + + /* Send ZLP as ACK in Status OUT phase */ + ep_ref[0].pid = TX_BD_PID_DATA1; + purb->actual_length = 0; + mpc8xx_udc_init_tx (epi, purb); + mpc8xx_udc_ep_tx (epi); + + } else { + + if (purb->actual_length) { + ep_ref[0].pid = TX_BD_PID_DATA1; + mpc8xx_udc_init_tx (epi, purb); + + if (!(purb->actual_length % EP0_MAX_PACKET_SIZE)) { + ep_ref[0].sc |= EP_SEND_ZLP; + } + + if (purb->device_request.wValue == + USB_DESCRIPTOR_TYPE_DEVICE) { + if (le16_to_cpu (purb->device_request.wLength) + > purb->actual_length) { + /* Send EP0_MAX_PACKET_SIZE bytes + * unless correct size requested. + */ + if (purb->actual_length > epi->tx_packetSize) { + purb->actual_length = epi->tx_packetSize; + } + } + } + mpc8xx_udc_ep_tx (epi); + + } else { + /* Corrupt SETUP packet? */ + ERR ("Zero length data or SETUP with DATA-IN phase ?\n"); + return 1; + } + } + return 0; +} + +/* mpc8xx_udc_init_tx + * + * Setup some basic parameters for a TX transaction + */ +static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi, + struct urb *tx_urb) +{ + epi->sent = 0; + epi->last = 0; + epi->tx_urb = tx_urb; +} + +/* mpc8xx_udc_ep0_rx + * + * Receive ep0/control USB data. Parse and possibly send a response. + */ +static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp) +{ + if (rx_cbdp->cbd_sc & RX_BD_PID_SETUP) { + + /* Unconditionally accept SETUP packets */ + if (mpc8xx_udc_ep0_rx_setup (rx_cbdp)) { + mpc8xx_udc_stall (0); + } + + } else { + + mpc8xx_udc_clear_rxbd (rx_cbdp); + + if ((rx_cbdp->cbd_datlen - 2)) { + /* SETUP with a DATA phase + * outside of SETUP packet. + * Reply with STALL. + */ + mpc8xx_udc_stall (0); + } + } +} + +/* mpc8xx_udc_epn_rx + * + * Receive some data from cbd into USB system urb data abstraction + * Upper layers should NAK if there is insufficient RX data space + */ +static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp) +{ + struct usb_endpoint_instance *epi = 0; + struct urb *urb = 0; + unsigned int x = 0; + + if (epid >= MAX_ENDPOINTS || !rx_cbdp->cbd_datlen) { + return 0; + } + + /* USB 2.0 PDF section 8.6.4 + * Discard data with invalid PID it is a resend. + */ + if (ep_ref[epid].pid != (rx_cbdp->cbd_sc & 0xC0)) { + return 1; + } + TOGGLE_RX_PID (ep_ref[epid].pid); + + epi = &udc_device->bus->endpoint_array[epid]; + urb = epi->rcv_urb; + + for (; x < (rx_cbdp->cbd_datlen - 2); x++) { + *((unsigned char *) (urb->buffer + urb->actual_length + x)) = + *((unsigned char *) (rx_cbdp->cbd_bufaddr + x)); + } + + if (x) { + usbd_rcv_complete (epi, x, 0); + if (ep_ref[epid].urb->status == RECV_ERROR) { + DBG ("RX error unset NAK\n"); + udc_unset_nak (epid); + } + } + return x; +} + +/* mpc8xx_udc_clock_init + * + * Obtain a clock reference for Full Speed Signaling + */ +static void mpc8xx_udc_clock_init (volatile immap_t * immr, + volatile cpm8xx_t * cp) +{ + +#if defined(CFG_USB_EXTC_CLK) + + /* This has been tested with a 48MHz crystal on CLK6 */ + switch (CFG_USB_EXTC_CLK) { + case 1: + immr->im_ioport.iop_papar |= 0x0100; + immr->im_ioport.iop_padir &= ~0x0100; + cp->cp_sicr |= 0x24; + break; + case 2: + immr->im_ioport.iop_papar |= 0x0200; + immr->im_ioport.iop_padir &= ~0x0200; + cp->cp_sicr |= 0x2D; + break; + case 3: + immr->im_ioport.iop_papar |= 0x0400; + immr->im_ioport.iop_padir &= ~0x0400; + cp->cp_sicr |= 0x36; + break; + case 4: + immr->im_ioport.iop_papar |= 0x0800; + immr->im_ioport.iop_padir &= ~0x0800; + cp->cp_sicr |= 0x3F; + break; + default: + udc_state = STATE_ERROR; + break; + } + +#elif defined(CFG_USB_BRGCLK) + + /* This has been tested with brgclk == 50MHz */ + DECLARE_GLOBAL_DATA_PTR; + int divisor = 0; + + if (gd->cpu_clk < 48000000L) { + ERR ("brgclk is too slow for full-speed USB!\n"); + udc_state = STATE_ERROR; + return; + } + + /* Assume the brgclk is 'good enough', we want !(gd->cpu_clk%48Mhz) + * but, can /probably/ live with close-ish alternative rates. + */ + divisor = (gd->cpu_clk / 48000000L) - 1; + cp->cp_sicr &= ~0x0000003F; + + switch (CFG_USB_BRGCLK) { + case 1: + cp->cp_brgc1 |= (divisor | CPM_BRG_EN); + cp->cp_sicr &= ~0x2F; + break; + case 2: + cp->cp_brgc2 |= (divisor | CPM_BRG_EN); + cp->cp_sicr |= 0x00000009; + break; + case 3: + cp->cp_brgc3 |= (divisor | CPM_BRG_EN); + cp->cp_sicr |= 0x00000012; + break; + case 4: + cp->cp_brgc4 = (divisor | CPM_BRG_EN); + cp->cp_sicr |= 0x0000001B; + break; + default: + udc_state = STATE_ERROR; + break; + } + +#else +#error "CFG_USB_EXTC_CLK or CFG_USB_BRGCLK must be defined" +#endif + +} + +/* mpc8xx_udc_cbd_attach + * + * attach a cbd to and endpoint + */ +static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size) +{ + + if (!tx_cbd[ep] || !rx_cbd[ep] || ep >= MAX_ENDPOINTS) { + udc_state = STATE_ERROR; + return; + } + + if (tx_size > USB_MAX_PKT || rx_size > USB_MAX_PKT || + (!tx_size && !rx_size)) { + udc_state = STATE_ERROR; + return; + } + + /* Attach CBD to appropiate Parameter RAM Endpoint data structure */ + if (rx_size) { + endpoints[ep]->rbase = (u32) rx_cbd[rx_ct]; + endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct]; + rx_ct++; + + if (!ep) { + + endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct]; + rx_cbd[rx_ct]->cbd_sc |= RX_BD_W; + rx_ct++; + + } else { + rx_ct += 2; + endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct]; + rx_cbd[rx_ct]->cbd_sc |= RX_BD_W; + rx_ct++; + } + + /* Where we expect to RX data on this endpoint */ + ep_ref[ep].prx = rx_cbd[rx_ct - 1]; + } else { + + ep_ref[ep].prx = 0; + endpoints[ep]->rbase = 0; + endpoints[ep]->rbptr = 0; + } + + if (tx_size) { + endpoints[ep]->tbase = (u32) tx_cbd[tx_ct]; + endpoints[ep]->tbptr = (u32) tx_cbd[tx_ct]; + tx_ct++; + } else { + endpoints[ep]->tbase = 0; + endpoints[ep]->tbptr = 0; + } + + endpoints[ep]->tstate = 0; + endpoints[ep]->tbcnt = 0; + endpoints[ep]->mrblr = EP_MAX_PKT; + endpoints[ep]->rfcr = 0x18; + endpoints[ep]->tfcr = 0x18; + ep_ref[ep].sc |= EP_ATTACHED; + + DBG ("ep %d rbase 0x%08x rbptr 0x%08x tbase 0x%08x tbptr 0x%08x prx = %p\n", + ep, endpoints[ep]->rbase, endpoints[ep]->rbptr, + endpoints[ep]->tbase, endpoints[ep]->tbptr, + ep_ref[ep].prx); + + return; +} + +/* mpc8xx_udc_cbd_init + * + * Allocate space for a cbd and allocate TX/RX data space + */ +static void mpc8xx_udc_cbd_init (void) +{ + int i = 0; + + for (; i < TX_RING_SIZE; i++) { + tx_cbd[i] = (cbd_t *) + mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int)); + } + + for (i = 0; i < RX_RING_SIZE; i++) { + rx_cbd[i] = (cbd_t *) + mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int)); + } + + for (i = 0; i < TX_RING_SIZE; i++) { + tx_cbd[i]->cbd_bufaddr = + mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int)); + + tx_cbd[i]->cbd_sc = (TX_BD_I | TX_BD_W); + tx_cbd[i]->cbd_datlen = 0x0000; + } + + + for (i = 0; i < RX_RING_SIZE; i++) { + rx_cbd[i]->cbd_bufaddr = + mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int)); + rx_cbd[i]->cbd_sc = (RX_BD_I | RX_BD_E); + rx_cbd[i]->cbd_datlen = 0x0000; + + } + + return; +} + +/* mpc8xx_udc_endpoint_init + * + * Attach an endpoint to some dpram + */ +static void mpc8xx_udc_endpoint_init (void) +{ + int i = 0; + + for (; i < MAX_ENDPOINTS; i++) { + endpoints[i] = (usb_epb_t *) + mpc8xx_udc_alloc (sizeof (usb_epb_t), 32); + } +} + +/* mpc8xx_udc_alloc + * + * Grab the address of some dpram + */ +static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment) +{ + u32 retaddr = address_base; + + while (retaddr % alignment) { + retaddr++; + } + address_base += data_size; + + return retaddr; +} + +#endif /* CONFIG_MPC885_FAMILY && CONFIG_USB_DEVICE) */ diff --git a/drivers/usbdcore_omap1510.c b/drivers/usbdcore_omap1510.c index 1d54a63..84bb936 100644 --- a/drivers/usbdcore_omap1510.c +++ b/drivers/usbdcore_omap1510.c @@ -1517,4 +1517,31 @@ void udc_startup_events (struct usb_device_instance *device) udc_enable (device); } +/** + * udc_irq - do pseudo interrupts + */ +void udc_irq(void) +{ + /* Loop while we have interrupts. + * If we don't do this, the input chain + * polling delay is likely to miss + * host requests. + */ + while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) { + /* Handle any new IRQs */ + omap1510_udc_irq (); + omap1510_udc_noniso_irq (); + } +} + +/* Flow control */ +void udc_set_nak(int epid) +{ + /* TODO: implement this functionality in omap1510 */ +} + +void udc_unset_nak (int epid) +{ + /* TODO: implement this functionality in omap1510 */ +} #endif diff --git a/drivers/usbtty.c b/drivers/usbtty.c index ce4a12e..d41a00b 100644 --- a/drivers/usbtty.c +++ b/drivers/usbtty.c @@ -2,6 +2,9 @@ * (C) Copyright 2003 * Gerry Hamel, geh@ti.com, Texas Instruments * + * (C) Copyright 2006 + * Bryan O'Donoghue, bodonoghue@codehermit.ie + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -25,20 +28,42 @@ #include <circbuf.h> #include <devices.h> #include "usbtty.h" +#include "usb_cdc_acm.h" +#include "usbdescriptors.h" +#include <config.h> /* If defined, override Linux identifiers with + * vendor specific ones */ #if 0 -#define TTYDBG(fmt,args...) serial_printf("[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args) +#define TTYDBG(fmt,args...)\ + serial_printf("[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args) #else #define TTYDBG(fmt,args...) do{}while(0) #endif -#if 0 -#define TTYERR(fmt,args...) serial_printf("ERROR![%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args) +#if 1 +#define TTYERR(fmt,args...)\ + serial_printf("ERROR![%s] %s %d: "fmt, __FILE__,__FUNCTION__,\ + __LINE__,##args) #else #define TTYERR(fmt,args...) do{}while(0) #endif /* + * Defines + */ +#define NUM_CONFIGS 1 +#define MAX_INTERFACES 2 +#define NUM_ENDPOINTS 3 +#define ACM_TX_ENDPOINT 3 +#define ACM_RX_ENDPOINT 2 +#define GSERIAL_TX_ENDPOINT 2 +#define GSERIAL_RX_ENDPOINT 1 +#define NUM_ACM_INTERFACES 2 +#define NUM_GSERIAL_INTERFACES 1 +#define CONFIG_USBD_DATA_INTERFACE_STR "Bulk Data Interface" +#define CONFIG_USBD_CTRL_INTERFACE_STR "Control Interface" + +/* * Buffers to hold input and output data */ #define USBTTY_BUFFER_SIZE 256 @@ -50,157 +75,336 @@ static circbuf_t usbtty_output; * Instance variables */ static device_t usbttydev; -static struct usb_device_instance device_instance[1]; -static struct usb_bus_instance bus_instance[1]; +static struct usb_device_instance device_instance[1]; +static struct usb_bus_instance bus_instance[1]; static struct usb_configuration_instance config_instance[NUM_CONFIGS]; -static struct usb_interface_instance interface_instance[NUM_INTERFACES]; -static struct usb_alternate_instance alternate_instance[NUM_INTERFACES]; -static struct usb_endpoint_instance endpoint_instance[NUM_ENDPOINTS+1]; /* one extra for control endpoint */ - -/* - * Static allocation of urbs - */ -#define RECV_ENDPOINT 1 -#define TX_ENDPOINT 2 +static struct usb_interface_instance interface_instance[MAX_INTERFACES]; +static struct usb_alternate_instance alternate_instance[MAX_INTERFACES]; +/* one extra for control endpoint */ +static struct usb_endpoint_instance endpoint_instance[NUM_ENDPOINTS+1]; /* * Global flag */ int usbtty_configured_flag = 0; - /* * Serial number */ static char serial_number[16]; + /* - * Descriptors + * Descriptors, Strings, Local variables. */ + +/* defined and used by usbdcore_ep0.c */ +extern struct usb_string_descriptor **usb_strings; + +/* Indicies, References */ +static unsigned short rx_endpoint = 0; +static unsigned short tx_endpoint = 0; +static unsigned short interface_count = 0; +static struct usb_string_descriptor *usbtty_string_table[STR_COUNT]; + +/* USB Descriptor Strings */ static u8 wstrLang[4] = {4,USB_DT_STRING,0x9,0x4}; static u8 wstrManufacturer[2 + 2*(sizeof(CONFIG_USBD_MANUFACTURER)-1)]; static u8 wstrProduct[2 + 2*(sizeof(CONFIG_USBD_PRODUCT_NAME)-1)]; static u8 wstrSerial[2 + 2*(sizeof(serial_number) - 1)]; static u8 wstrConfiguration[2 + 2*(sizeof(CONFIG_USBD_CONFIGURATION_STR)-1)]; -static u8 wstrInterface[2 + 2*(sizeof(CONFIG_USBD_INTERFACE_STR)-1)]; - -static struct usb_string_descriptor *usbtty_string_table[] = { - (struct usb_string_descriptor*)wstrLang, - (struct usb_string_descriptor*)wstrManufacturer, - (struct usb_string_descriptor*)wstrProduct, - (struct usb_string_descriptor*)wstrSerial, - (struct usb_string_descriptor*)wstrConfiguration, - (struct usb_string_descriptor*)wstrInterface -}; -extern struct usb_string_descriptor **usb_strings; /* defined and used by omap1510_ep0.c */ +static u8 wstrDataInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)]; +static u8 wstrCtrlInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)]; +/* Standard USB Data Structures */ +static struct usb_interface_descriptor interface_descriptors[MAX_INTERFACES]; +static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS]; +static struct usb_configuration_descriptor *configuration_descriptor = 0; static struct usb_device_descriptor device_descriptor = { - bLength: sizeof(struct usb_device_descriptor), - bDescriptorType: USB_DT_DEVICE, - bcdUSB: USB_BCD_VERSION, - bDeviceClass: USBTTY_DEVICE_CLASS, - bDeviceSubClass: USBTTY_DEVICE_SUBCLASS, - bDeviceProtocol: USBTTY_DEVICE_PROTOCOL, - bMaxPacketSize0: EP0_MAX_PACKET_SIZE, - idVendor: CONFIG_USBD_VENDORID, - idProduct: CONFIG_USBD_PRODUCTID, - bcdDevice: USBTTY_BCD_DEVICE, - iManufacturer: STR_MANUFACTURER, - iProduct: STR_PRODUCT, - iSerialNumber: STR_SERIAL, - bNumConfigurations: NUM_CONFIGS - }; -static struct usb_configuration_descriptor config_descriptors[NUM_CONFIGS] = { - { - bLength: sizeof(struct usb_configuration_descriptor), - bDescriptorType: USB_DT_CONFIG, - wTotalLength: (sizeof(struct usb_configuration_descriptor)*NUM_CONFIGS) + - (sizeof(struct usb_interface_descriptor)*NUM_INTERFACES) + - (sizeof(struct usb_endpoint_descriptor)*NUM_ENDPOINTS), - bNumInterfaces: NUM_INTERFACES, - bConfigurationValue: 1, - iConfiguration: STR_CONFIG, - bmAttributes: BMATTRIBUTE_SELF_POWERED | BMATTRIBUTE_RESERVED, - bMaxPower: USBTTY_MAXPOWER - }, -}; -static struct usb_interface_descriptor interface_descriptors[NUM_INTERFACES] = { - { - bLength: sizeof(struct usb_interface_descriptor), - bDescriptorType: USB_DT_INTERFACE, - bInterfaceNumber: 0, - bAlternateSetting: 0, - bNumEndpoints: NUM_ENDPOINTS, - bInterfaceClass: USBTTY_INTERFACE_CLASS, - bInterfaceSubClass: USBTTY_INTERFACE_SUBCLASS, - bInterfaceProtocol: USBTTY_INTERFACE_PROTOCOL, - iInterface: STR_INTERFACE - }, + .bLength = sizeof(struct usb_device_descriptor), + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = cpu_to_le16(USB_BCD_VERSION), + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + .bMaxPacketSize0 = EP0_MAX_PACKET_SIZE, + .idVendor = cpu_to_le16(CONFIG_USBD_VENDORID), + .bcdDevice = cpu_to_le16(USBTTY_BCD_DEVICE), + .iManufacturer = STR_MANUFACTURER, + .iProduct = STR_PRODUCT, + .iSerialNumber = STR_SERIAL, + .bNumConfigurations = NUM_CONFIGS }; -static struct usb_endpoint_descriptor ep_descriptors[NUM_ENDPOINTS] = { - { - bLength: sizeof(struct usb_endpoint_descriptor), - bDescriptorType: USB_DT_ENDPOINT, - bEndpointAddress: CONFIG_USBD_SERIAL_OUT_ENDPOINT | USB_DIR_OUT, - bmAttributes: USB_ENDPOINT_XFER_BULK, - wMaxPacketSize: CONFIG_USBD_SERIAL_OUT_PKTSIZE, - bInterval: 0 - }, - { - bLength: sizeof(struct usb_endpoint_descriptor), - bDescriptorType: USB_DT_ENDPOINT, - bEndpointAddress: CONFIG_USBD_SERIAL_IN_ENDPOINT | USB_DIR_IN, - bmAttributes: USB_ENDPOINT_XFER_BULK, - wMaxPacketSize: CONFIG_USBD_SERIAL_IN_PKTSIZE, - bInterval: 0 - }, - { - bLength: sizeof(struct usb_endpoint_descriptor), - bDescriptorType: USB_DT_ENDPOINT, - bEndpointAddress: CONFIG_USBD_SERIAL_INT_ENDPOINT | USB_DIR_IN, - bmAttributes: USB_ENDPOINT_XFER_INT, - wMaxPacketSize: CONFIG_USBD_SERIAL_INT_PKTSIZE, - bInterval: 0 - }, + + +/* + * Static CDC ACM specific descriptors + */ + +struct acm_config_desc { + struct usb_configuration_descriptor configuration_desc; + + /* Master Interface */ + struct usb_interface_descriptor interface_desc; + + struct usb_class_header_function_descriptor usb_class_header; + struct usb_class_call_management_descriptor usb_class_call_mgt; + struct usb_class_abstract_control_descriptor usb_class_acm; + struct usb_class_union_function_descriptor usb_class_union; + struct usb_endpoint_descriptor notification_endpoint; + + /* Slave Interface */ + struct usb_interface_descriptor data_class_interface; + struct usb_endpoint_descriptor + data_endpoints[NUM_ENDPOINTS-1] __attribute__((packed)); +} __attribute__((packed)); + +static struct acm_config_desc acm_configuration_descriptors[NUM_CONFIGS] = { + { + .configuration_desc ={ + .bLength = + sizeof(struct usb_configuration_descriptor), + .bDescriptorType = USB_DT_CONFIG, + .wTotalLength = + cpu_to_le16(sizeof(struct acm_config_desc)), + .bNumInterfaces = NUM_ACM_INTERFACES, + .bConfigurationValue = 1, + .iConfiguration = STR_CONFIG, + .bmAttributes = + BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED, + .bMaxPower = USBTTY_MAXPOWER + }, + /* Interface 1 */ + .interface_desc = { + .bLength = sizeof(struct usb_interface_descriptor), + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + .bAlternateSetting = 0, + .bNumEndpoints = 0x01, + .bInterfaceClass = + COMMUNICATIONS_INTERFACE_CLASS_CONTROL, + .bInterfaceSubClass = COMMUNICATIONS_ACM_SUBCLASS, + .bInterfaceProtocol = COMMUNICATIONS_V25TER_PROTOCOL, + .iInterface = STR_CTRL_INTERFACE, + }, + .usb_class_header = { + .bFunctionLength = + sizeof(struct usb_class_header_function_descriptor), + .bDescriptorType = CS_INTERFACE, + .bDescriptorSubtype = USB_ST_HEADER, + .bcdCDC = cpu_to_le16(110), + }, + .usb_class_call_mgt = { + .bFunctionLength = + sizeof(struct usb_class_call_management_descriptor), + .bDescriptorType = CS_INTERFACE, + .bDescriptorSubtype = USB_ST_CMF, + .bmCapabilities = 0x00, + .bDataInterface = 0x01, + }, + .usb_class_acm = { + .bFunctionLength = + sizeof(struct usb_class_abstract_control_descriptor), + .bDescriptorType = CS_INTERFACE, + .bDescriptorSubtype = USB_ST_ACMF, + .bmCapabilities = 0x00, + }, + .usb_class_union = { + .bFunctionLength = + sizeof(struct usb_class_union_function_descriptor), + .bDescriptorType = CS_INTERFACE, + .bDescriptorSubtype = USB_ST_UF, + .bMasterInterface = 0x00, + .bSlaveInterface0 = 0x01, + }, + .notification_endpoint = { + .bLength = + sizeof(struct usb_endpoint_descriptor), + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0x01 | USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize + = cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE), + .bInterval = 0xFF, + }, + + /* Interface 2 */ + .data_class_interface = { + .bLength = + sizeof(struct usb_interface_descriptor), + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0x01, + .bAlternateSetting = 0x00, + .bNumEndpoints = 0x02, + .bInterfaceClass = + COMMUNICATIONS_INTERFACE_CLASS_DATA, + .bInterfaceSubClass = DATA_INTERFACE_SUBCLASS_NONE, + .bInterfaceProtocol = DATA_INTERFACE_PROTOCOL_NONE, + .iInterface = STR_DATA_INTERFACE, + }, + .data_endpoints = { + { + .bLength = + sizeof(struct usb_endpoint_descriptor), + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0x02 | USB_DIR_OUT, + .bmAttributes = + USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = + cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE), + .bInterval = 0xFF, + }, + { + .bLength = + sizeof(struct usb_endpoint_descriptor), + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0x03 | USB_DIR_IN, + .bmAttributes = + USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = + cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE), + .bInterval = 0xFF, + }, + }, + }, }; -static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS] = { - &(ep_descriptors[0]), - &(ep_descriptors[1]), - &(ep_descriptors[2]), + +static struct rs232_emu rs232_desc={ + .dter = 115200, + .stop_bits = 0x00, + .parity = 0x00, + .data_bits = 0x08 }; -/* utility function for converting char* to wide string used by USB */ -static void str2wide (char *str, u16 * wide) -{ - int i; - for (i = 0; i < strlen (str) && str[i]; i++) - wide[i] = (u16) str[i]; -} +/* + * Static Generic Serial specific data + */ + + +struct gserial_config_desc { + + struct usb_configuration_descriptor configuration_desc; + struct usb_interface_descriptor + interface_desc[NUM_GSERIAL_INTERFACES] __attribute__((packed)); + struct usb_endpoint_descriptor + data_endpoints[NUM_ENDPOINTS] __attribute__((packed)); + +} __attribute__((packed)); + +static struct gserial_config_desc +gserial_configuration_descriptors[NUM_CONFIGS] ={ + { + .configuration_desc ={ + .bLength = sizeof(struct usb_configuration_descriptor), + .bDescriptorType = USB_DT_CONFIG, + .wTotalLength = + cpu_to_le16(sizeof(struct gserial_config_desc)), + .bNumInterfaces = NUM_GSERIAL_INTERFACES, + .bConfigurationValue = 1, + .iConfiguration = STR_CONFIG, + .bmAttributes = + BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED, + .bMaxPower = USBTTY_MAXPOWER + }, + .interface_desc = { + { + .bLength = + sizeof(struct usb_interface_descriptor), + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + .bAlternateSetting = 0, + .bNumEndpoints = NUM_ENDPOINTS, + .bInterfaceClass = + COMMUNICATIONS_INTERFACE_CLASS_VENDOR, + .bInterfaceSubClass = + COMMUNICATIONS_NO_SUBCLASS, + .bInterfaceProtocol = + COMMUNICATIONS_NO_PROTOCOL, + .iInterface = STR_DATA_INTERFACE + }, + }, + .data_endpoints = { + { + .bLength = + sizeof(struct usb_endpoint_descriptor), + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0x01 | USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = + cpu_to_le16(CONFIG_USBD_SERIAL_OUT_PKTSIZE), + .bInterval= 0xFF, + }, + { + .bLength = + sizeof(struct usb_endpoint_descriptor), + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0x02 | USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = + cpu_to_le16(CONFIG_USBD_SERIAL_IN_PKTSIZE), + .bInterval = 0xFF, + }, + { + .bLength = + sizeof(struct usb_endpoint_descriptor), + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0x03 | USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = + cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE), + .bInterval = 0xFF, + }, + }, + }, +}; /* - * Prototypes + * Static Function Prototypes */ + static void usbtty_init_strings (void); static void usbtty_init_instances (void); static void usbtty_init_endpoints (void); - +static void usbtty_init_terminal_type(short type); static void usbtty_event_handler (struct usb_device_instance *device, - usb_device_event_t event, int data); + usb_device_event_t event, int data); +static int usbtty_cdc_setup(struct usb_device_request *request, + struct urb *urb); static int usbtty_configured (void); - static int write_buffer (circbuf_t * buf); static int fill_buffer (circbuf_t * buf); void usbtty_poll (void); -static void pretend_interrupts (void); +/* utility function for converting char* to wide string used by USB */ +static void str2wide (char *str, u16 * wide) +{ + int i; + for (i = 0; i < strlen (str) && str[i]; i++){ + #if defined(__LITTLE_ENDIAN__) + wide[i] = (u16) str[i]; + #elif defined(__BIG_ENDIAN__) + wide[i] = ((u16)(str[i])<<8); + #else + #error "__LITTLE_ENDIAN__ or __BIG_ENDIAN__ undefined" + #endif + } +} /* * Test whether a character is in the RX buffer */ + int usbtty_tstc (void) { + struct usb_endpoint_instance *endpoint = + &endpoint_instance[rx_endpoint]; + + /* If no input data exists, allow more RX to be accepted */ + if(usbtty_input.size <= 0){ + udc_unset_nak(endpoint->endpoint_address&0x03); + } + usbtty_poll (); return (usbtty_input.size > 0); } @@ -210,15 +414,21 @@ int usbtty_tstc (void) * otherwise. When the function is succesfull, the character read is * written into its argument c. */ + int usbtty_getc (void) { char c; + struct usb_endpoint_instance *endpoint = + &endpoint_instance[rx_endpoint]; while (usbtty_input.size <= 0) { + udc_unset_nak(endpoint->endpoint_address&0x03); usbtty_poll (); } buf_pop (&usbtty_input, &c, 1); + udc_set_nak(endpoint->endpoint_address&0x03); + return c; } @@ -238,7 +448,6 @@ void usbtty_putc (const char c) } } - /* usbtty_puts() helper function for finding the next '\n' in a string */ static int next_nl_pos (const char *s) { @@ -252,8 +461,9 @@ static int next_nl_pos (const char *s) } /* - * Output a string to the usb client port. + * Output a string to the usb client port - implementing flow control */ + static void __usbtty_puts (const char *str, int len) { int maxlen = usbtty_output.totalsize; @@ -261,22 +471,19 @@ static void __usbtty_puts (const char *str, int len) /* break str into chunks < buffer size, if needed */ while (len > 0) { - space = maxlen - usbtty_output.size; + usbtty_poll (); + space = maxlen - usbtty_output.size; /* Empty buffer here, if needed, to ensure space... */ - if (space <= 0) { + if (space) { write_buffer (&usbtty_output); - space = maxlen - usbtty_output.size; - if (space <= 0) { - space = len; /* allow old data to be overwritten. */ - } - } - n = MIN (space, MIN (len, maxlen)); - buf_push (&usbtty_output, str, n); + n = MIN (space, MIN (len, maxlen)); + buf_push (&usbtty_output, str, n); - str += n; - len -= n; + str += n; + len -= n; + } } } @@ -313,8 +520,10 @@ int drv_usbtty_init (void) { int rc; char * sn; + char * tt; int snlen; + /* Ger seiral number */ if (!(sn = getenv("serial#"))) { sn = "000000000000"; } @@ -327,6 +536,14 @@ int drv_usbtty_init (void) memcpy (serial_number, sn, snlen); serial_number[snlen] = '\0'; + /* Decide on which type of UDC device to be. + */ + + if(!(tt = getenv("usbtty"))) { + tt = "generic"; + } + usbtty_init_terminal_type(strcmp(tt,"cdc_acm")); + /* prepare buffers... */ buf_init (&usbtty_input, USBTTY_BUFFER_SIZE); buf_init (&usbtty_output, USBTTY_BUFFER_SIZE); @@ -337,7 +554,7 @@ int drv_usbtty_init (void) usbtty_init_strings (); usbtty_init_instances (); - udc_startup_events (device_instance); /* Enable our device, initialize udc pointers */ + udc_startup_events (device_instance);/* Enable dev, init udc pointers */ udc_connect (); /* Enable pullup for host detection */ usbtty_init_endpoints (); @@ -362,30 +579,48 @@ static void usbtty_init_strings (void) { struct usb_string_descriptor *string; + usbtty_string_table[STR_LANG] = + (struct usb_string_descriptor*)wstrLang; + string = (struct usb_string_descriptor *) wstrManufacturer; - string->bLength = sizeof (wstrManufacturer); + string->bLength = sizeof(wstrManufacturer); string->bDescriptorType = USB_DT_STRING; str2wide (CONFIG_USBD_MANUFACTURER, string->wData); + usbtty_string_table[STR_MANUFACTURER]=string; + string = (struct usb_string_descriptor *) wstrProduct; - string->bLength = sizeof (wstrProduct); + string->bLength = sizeof(wstrProduct); string->bDescriptorType = USB_DT_STRING; str2wide (CONFIG_USBD_PRODUCT_NAME, string->wData); + usbtty_string_table[STR_PRODUCT]=string; + string = (struct usb_string_descriptor *) wstrSerial; - string->bLength = 2 + 2*strlen(serial_number); + string->bLength = sizeof(serial_number); string->bDescriptorType = USB_DT_STRING; str2wide (serial_number, string->wData); + usbtty_string_table[STR_SERIAL]=string; + string = (struct usb_string_descriptor *) wstrConfiguration; - string->bLength = sizeof (wstrConfiguration); + string->bLength = sizeof(wstrConfiguration); string->bDescriptorType = USB_DT_STRING; str2wide (CONFIG_USBD_CONFIGURATION_STR, string->wData); + usbtty_string_table[STR_CONFIG]=string; - string = (struct usb_string_descriptor *) wstrInterface; - string->bLength = sizeof (wstrInterface); + + string = (struct usb_string_descriptor *) wstrDataInterface; + string->bLength = sizeof(wstrDataInterface); string->bDescriptorType = USB_DT_STRING; - str2wide (CONFIG_USBD_INTERFACE_STR, string->wData); + str2wide (CONFIG_USBD_DATA_INTERFACE_STR, string->wData); + usbtty_string_table[STR_DATA_INTERFACE]=string; + + string = (struct usb_string_descriptor *) wstrCtrlInterface; + string->bLength = sizeof(wstrCtrlInterface); + string->bDescriptorType = USB_DT_STRING; + str2wide (CONFIG_USBD_CTRL_INTERFACE_STR, string->wData); + usbtty_string_table[STR_CTRL_INTERFACE]=string; /* Now, initialize the string table for ep0 handling */ usb_strings = usbtty_string_table; @@ -400,6 +635,7 @@ static void usbtty_init_instances (void) device_instance->device_state = STATE_INIT; device_instance->device_descriptor = &device_descriptor; device_instance->event = usbtty_event_handler; + device_instance->cdc_recv_setup = usbtty_cdc_setup; device_instance->bus = bus_instance; device_instance->configurations = NUM_CONFIGS; device_instance->configuration_instance_array = config_instance; @@ -415,8 +651,8 @@ static void usbtty_init_instances (void) /* configuration instance */ memset (config_instance, 0, sizeof (struct usb_configuration_instance)); - config_instance->interfaces = NUM_INTERFACES; - config_instance->configuration_descriptor = config_descriptors; + config_instance->interfaces = interface_count; + config_instance->configuration_descriptor = configuration_descriptor; config_instance->interface_instance_array = interface_instance; /* interface instance */ @@ -447,17 +683,22 @@ static void usbtty_init_instances (void) sizeof (struct usb_endpoint_instance)); endpoint_instance[i].endpoint_address = - ep_descriptors[i - 1].bEndpointAddress; + ep_descriptor_ptrs[i - 1]->bEndpointAddress; - endpoint_instance[i].rcv_packetSize = - ep_descriptors[i - 1].wMaxPacketSize; endpoint_instance[i].rcv_attributes = - ep_descriptors[i - 1].bmAttributes; + ep_descriptor_ptrs[i - 1]->bmAttributes; + + endpoint_instance[i].rcv_packetSize = + le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize); + + endpoint_instance[i].tx_attributes = + ep_descriptor_ptrs[i - 1]->bmAttributes; endpoint_instance[i].tx_packetSize = - ep_descriptors[i - 1].wMaxPacketSize; + le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize); + endpoint_instance[i].tx_attributes = - ep_descriptors[i - 1].bmAttributes; + ep_descriptor_ptrs[i - 1]->bmAttributes; urb_link_init (&endpoint_instance[i].rcv); urb_link_init (&endpoint_instance[i].rdy); @@ -480,13 +721,79 @@ static void usbtty_init_endpoints (void) int i; bus_instance->max_endpoints = NUM_ENDPOINTS + 1; - for (i = 0; i <= NUM_ENDPOINTS; i++) { + for (i = 1; i <= NUM_ENDPOINTS; i++) { udc_setup_ep (device_instance, i, &endpoint_instance[i]); } } +/* usbtty_init_terminal_type + * + * Do some late binding for our device type. + */ +static void usbtty_init_terminal_type(short type) +{ + switch(type){ + /* CDC ACM */ + case 0: + /* Assign endpoint descriptors */ + ep_descriptor_ptrs[0] = + &acm_configuration_descriptors[0].notification_endpoint; + ep_descriptor_ptrs[1] = + &acm_configuration_descriptors[0].data_endpoints[0]; + ep_descriptor_ptrs[2] = + &acm_configuration_descriptors[0].data_endpoints[1]; + + /* Enumerate Device Descriptor */ + device_descriptor.bDeviceClass = + COMMUNICATIONS_DEVICE_CLASS; + device_descriptor.idProduct = + cpu_to_le16(CONFIG_USBD_PRODUCTID_CDCACM); + + /* Assign endpoint indices */ + tx_endpoint = ACM_TX_ENDPOINT; + rx_endpoint = ACM_RX_ENDPOINT; + + /* Configuration Descriptor */ + configuration_descriptor = + (struct usb_configuration_descriptor*) + &acm_configuration_descriptors; + + /* Interface count */ + interface_count = NUM_ACM_INTERFACES; + break; + + /* BULK IN/OUT & Default */ + case 1: + default: + /* Assign endpoint descriptors */ + ep_descriptor_ptrs[0] = + &gserial_configuration_descriptors[0].data_endpoints[0]; + ep_descriptor_ptrs[1] = + &gserial_configuration_descriptors[0].data_endpoints[1]; + ep_descriptor_ptrs[2] = + &gserial_configuration_descriptors[0].data_endpoints[2]; + + /* Enumerate Device Descriptor */ + device_descriptor.bDeviceClass = 0xFF; + device_descriptor.idProduct = + cpu_to_le16(CONFIG_USBD_PRODUCTID_GSERIAL); + + /* Assign endpoint indices */ + tx_endpoint = GSERIAL_TX_ENDPOINT; + rx_endpoint = GSERIAL_RX_ENDPOINT; + + /* Configuration Descriptor */ + configuration_descriptor = + (struct usb_configuration_descriptor*) + &gserial_configuration_descriptors; + + /* Interface count */ + interface_count = NUM_GSERIAL_INTERFACES; + break; + } +} -/*********************************************************************************/ +/******************************************************************************/ static struct urb *next_urb (struct usb_device_instance *device, struct usb_endpoint_instance *endpoint) @@ -526,27 +833,39 @@ static int write_buffer (circbuf_t * buf) return 0; } - if (buf->size) { + struct usb_endpoint_instance *endpoint = + &endpoint_instance[tx_endpoint]; + struct urb *current_urb = NULL; - struct usb_endpoint_instance *endpoint = - &endpoint_instance[TX_ENDPOINT]; - struct urb *current_urb = NULL; + current_urb = next_urb (device_instance, endpoint); + /* TX data still exists - send it now + */ + if(endpoint->sent < current_urb->actual_length){ + if(udc_endpoint_write (endpoint)){ + /* Write pre-empted by RX */ + return -1; + } + } + + if (buf->size) { char *dest; int space_avail; int popnum, popped; int total = 0; - /* Break buffer into urb sized pieces, and link each to the endpoint */ + /* Break buffer into urb sized pieces, + * and link each to the endpoint + */ while (buf->size > 0) { - current_urb = next_urb (device_instance, endpoint); + if (!current_urb) { TTYERR ("current_urb is NULL, buf->size %d\n", buf->size); return total; } - dest = current_urb->buffer + + dest = (char*)current_urb->buffer + current_urb->actual_length; space_avail = @@ -562,14 +881,19 @@ static int write_buffer (circbuf_t * buf) current_urb->actual_length += popped; total += popped; - /* If endpoint->last == 0, then transfers have not started on this endpoint */ + /* If endpoint->last == 0, then transfers have + * not started on this endpoint + */ if (endpoint->last == 0) { - udc_endpoint_write (endpoint); + if(udc_endpoint_write (endpoint)){ + /* Write pre-empted by RX */ + return -1; + } } - } /* end while */ + }/* end while */ return total; - } /* end if tx_urb */ + } return 0; } @@ -577,18 +901,22 @@ static int write_buffer (circbuf_t * buf) static int fill_buffer (circbuf_t * buf) { struct usb_endpoint_instance *endpoint = - &endpoint_instance[RECV_ENDPOINT]; + &endpoint_instance[rx_endpoint]; if (endpoint->rcv_urb && endpoint->rcv_urb->actual_length) { - unsigned int nb = endpoint->rcv_urb->actual_length; + unsigned int nb = 0; char *src = (char *) endpoint->rcv_urb->buffer; + unsigned int rx_avail = buf->totalsize - buf->size; + + if(rx_avail >= endpoint->rcv_urb->actual_length){ - buf_push (buf, src, nb); - endpoint->rcv_urb->actual_length = 0; + nb = endpoint->rcv_urb->actual_length; + buf_push (buf, src, nb); + endpoint->rcv_urb->actual_length = 0; + } return nb; } - return 0; } @@ -597,7 +925,7 @@ static int usbtty_configured (void) return usbtty_configured_flag; } -/*********************************************************************************/ +/******************************************************************************/ static void usbtty_event_handler (struct usb_device_instance *device, usb_device_event_t event, int data) @@ -619,8 +947,34 @@ static void usbtty_event_handler (struct usb_device_instance *device, } } -/*********************************************************************************/ +/******************************************************************************/ + +int usbtty_cdc_setup(struct usb_device_request *request, struct urb *urb) +{ + switch (request->bRequest){ + + case ACM_SET_CONTROL_LINE_STATE: /* Implies DTE ready */ + break; + case ACM_SEND_ENCAPSULATED_COMMAND : /* Required */ + break; + case ACM_SET_LINE_ENCODING : /* DTE stop/parity bits + * per character */ + break; + case ACM_GET_ENCAPSULATED_RESPONSE : /* request response */ + break; + case ACM_GET_LINE_ENCODING : /* request DTE rate, + * stop/parity bits */ + memcpy (urb->buffer , &rs232_desc, sizeof(rs232_desc)); + urb->actual_length = sizeof(rs232_desc); + + break; + default: + return 1; + } + return 0; +} +/******************************************************************************/ /* * Since interrupt handling has not yet been implemented, we use this function @@ -630,36 +984,29 @@ static void usbtty_event_handler (struct usb_device_instance *device, void usbtty_poll (void) { /* New interrupts? */ - pretend_interrupts (); + udc_irq(); - /* Write any output data to host buffer (do this before checking interrupts to avoid missing one) */ + /* Write any output data to host buffer + * (do this before checking interrupts to avoid missing one) + */ if (usbtty_configured ()) { write_buffer (&usbtty_output); } /* New interrupts? */ - pretend_interrupts (); + udc_irq(); - /* Check for new data from host.. (do this after checking interrupts to get latest data) */ + /* Check for new data from host.. + * (do this after checking interrupts to get latest data) + */ if (usbtty_configured ()) { fill_buffer (&usbtty_input); } /* New interrupts? */ - pretend_interrupts (); -} + udc_irq(); -static void pretend_interrupts (void) -{ - /* Loop while we have interrupts. - * If we don't do this, the input chain - * polling delay is likely to miss - * host requests. - */ - while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) { - /* Handle any new IRQs */ - omap1510_udc_irq (); - omap1510_udc_noniso_irq (); - } } + + #endif diff --git a/drivers/usbtty.h b/drivers/usbtty.h index 79c2fe5..8154e30 100644 --- a/drivers/usbtty.h +++ b/drivers/usbtty.h @@ -2,6 +2,9 @@ * (C) Copyright 2003 * Gerry Hamel, geh@ti.com, Texas Instruments * + * (C) Copyright 2006 + * Bryan O'Donoghue, bodonoghue@codehermit.ie, CodeHermit + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -21,44 +24,47 @@ #ifndef __USB_TTY_H__ #define __USB_TTY_H__ - #include "usbdcore.h" +#if defined(CONFIG_PPC) +#include "usbdcore_mpc8xx.h" +#elif defined(CONFIG_ARM) #include "usbdcore_omap1510.h" +#endif +#include <version_autogenerated.h> -#define NUM_CONFIGS 1 -#define NUM_INTERFACES 1 -#define NUM_ENDPOINTS 3 +/* If no VendorID/ProductID is defined in config.h, pretend to be Linux + * DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */ -#define EP0_MAX_PACKET_SIZE 64 +#define CONFIG_USBD_VENDORID 0x0525 /* Linux/NetChip */ +#define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6 /* gserial */ +#define CONFIG_USBD_PRODUCTID_CDCACM 0xa4a7 /* CDC ACM */ +#define CONFIG_USBD_MANUFACTURER "Das U-Boot" +#define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION -#define CONFIG_USBD_CONFIGURATION_STR "TTY via USB" -#define CONFIG_USBD_INTERFACE_STR "Simple Serial Data Interface - Bulk Mode" +#define CONFIG_USBD_CONFIGURATION_STR "TTY via USB" -#define CONFIG_USBD_SERIAL_OUT_ENDPOINT 2 -#define CONFIG_USBD_SERIAL_OUT_PKTSIZE 64 -#define CONFIG_USBD_SERIAL_IN_ENDPOINT 1 -#define CONFIG_USBD_SERIAL_IN_PKTSIZE 64 -#define CONFIG_USBD_SERIAL_INT_ENDPOINT 5 -#define CONFIG_USBD_SERIAL_INT_PKTSIZE 16 - +#define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT +#define CONFIG_USBD_SERIAL_OUT_PKTSIZE UDC_OUT_PACKET_SIZE +#define CONFIG_USBD_SERIAL_IN_ENDPOINT UDC_IN_ENDPOINT +#define CONFIG_USBD_SERIAL_IN_PKTSIZE UDC_IN_PACKET_SIZE +#define CONFIG_USBD_SERIAL_INT_ENDPOINT UDC_INT_ENDPOINT +#define CONFIG_USBD_SERIAL_INT_PKTSIZE UDC_INT_PACKET_SIZE +#define CONFIG_USBD_SERIAL_BULK_PKTSIZE UDC_BULK_PACKET_SIZE #define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS -#define USBTTY_DEVICE_SUBCLASS COMMUNICATIONS_NO_SUBCLASS -#define USBTTY_DEVICE_PROTOCOL COMMUNICATIONS_NO_PROTOCOL - -#define USBTTY_INTERFACE_CLASS 0xFF /* Vendor Specific */ -#define USBTTY_INTERFACE_SUBCLASS 0x02 -#define USBTTY_INTERFACE_PROTOCOL 0x01 -#define USBTTY_BCD_DEVICE 0x0 -#define USBTTY_MAXPOWER 0x0 +#define USBTTY_BCD_DEVICE 0x00 +#define USBTTY_MAXPOWER 0x00 -#define STR_MANUFACTURER 1 -#define STR_PRODUCT 2 -#define STR_SERIAL 3 -#define STR_CONFIG 4 -#define STR_INTERFACE 5 +#define STR_LANG 0x00 +#define STR_MANUFACTURER 0x01 +#define STR_PRODUCT 0x02 +#define STR_SERIAL 0x03 +#define STR_CONFIG 0x04 +#define STR_DATA_INTERFACE 0x05 +#define STR_CTRL_INTERFACE 0x06 +#define STR_COUNT 0x07 #endif diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index ebda719..e8cb299 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -592,9 +592,11 @@ typedef void (*ExcpHndlr) (void) ; #define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ #define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ + /* * USB Device Controller */ +#ifndef CONFIG_CPU_MONAHANS #define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ #define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ #define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ @@ -749,11 +751,28 @@ typedef void (*ExcpHndlr) (void) ; #define USIR1_IR13 (1 << 5) /* Interrup request ep 13 */ #define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */ #define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */ +#endif /* ! CONFIG_CPU_MONAHANS */ + +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + +/* + * USB Client Controller (incomplete) + */ +#define UDCCR __REG(0x40600000) +#define UDCICR0 __REG(0x40600004) +#define UDCCIR0 __REG(0x40600008) +#define UDCISR0 __REG(0x4060000c) +#define UDCSIR1 __REG(0x40600010) +#define UDCFNR __REG(0x40600014) +#define UDCOTGICR __REG(0x40600018) +#define UDCOTGISR __REG(0x4060001c) +#define UP2OCR __REG(0x40600020) +#define UP3OCR __REG(0x40600024) -#if defined(CONFIG_PXA27X) /* * USB Host Controller */ +#define OHCI_REGS_BASE 0x4C000000 /* required for ohci driver */ #define UHCREV __REG(0x4C000000) #define UHCHCON __REG(0x4C000004) #define UHCCOMS __REG(0x4C000008) diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h new file mode 100644 index 0000000..a4f7f9a --- /dev/null +++ b/include/configs/AdderUSB.h @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2006 CodeHermit. + * Bryan O'Donoghue <bodonoghue@codehermit.ie> + * + * Provides support for USB console on the Analogue & Micro Adder87x + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ADDERUSB__ +#define __ADDERUSB__ + +/* Include the board port */ +#include "Adder.h" + +#define CONFIG_USB_DEVICE /* Include UDC driver */ +#define CONFIG_USB_TTY /* Bind the TTY driver to UDC */ +#define CFG_USB_EXTC_CLK 0x02 /* Oscillator on EXTC_CLK 2 */ +#define CFG_USB_BRG_CLK 0x04 /* or use Baud rate generator 0x04 */ +#define CFG_CONSOLE_IS_IN_ENV /* Console is in env */ + +/* If you have a USB-IF assigned VendorID then you may wish to define + * your own vendor specific values either in BoardName.h or directly in + * usbd_vendor_info.h + */ + +/* +#define CONFIG_USBD_MANUFACTURER "CodeHermit.ie" +#define CONFIG_USBD_PRODUCT_NAME "Das U-Boot" +#define CONFIG_USBD_VENDORID 0xFFFF +#define CONFIG_USBD_PRODUCTID_GSERIAL 0xFFFF +#define CONFIG_USBD_PRODUCTID_CDCACM 0xFFFE +*/ + +#endif /* __ADDERUSB_H__ */ diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 73be069..4132f4a 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -94,9 +94,16 @@ /* USB */ #if 1 -#define CONFIG_USB_OHCI +#define CONFIG_USB_OHCI_NEW #define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE + +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT +#define CFG_USB_OHCI_REGS_BASE MPC5XXX_USB +#define CFG_USB_OHCI_SLOT_NAME "mpc5200" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + #else #define ADD_USB_CMD 0 #endif diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 7935593..1854fdc 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -146,9 +146,16 @@ /* USB */ #if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) -#define CONFIG_USB_OHCI +#define CONFIG_USB_OHCI_NEW #define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE + +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT +#define CFG_USB_OHCI_REGS_BASE MPC5XXX_USB +#define CFG_USB_OHCI_SLOT_NAME "mpc5200" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + #else #define ADD_USB_CMD 0 #endif diff --git a/include/configs/delta.h b/include/configs/delta.h index 1568120..25ba06e 100644 --- a/include/configs/delta.h +++ b/include/configs/delta.h @@ -94,12 +94,26 @@ # define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ | CFG_CMD_ENV \ | CFG_CMD_NAND \ - | CFG_CMD_I2C) \ + | CFG_CMD_I2C \ + | CFG_CMD_USB \ + | CFG_CMD_FAT) \ & ~(CFG_CMD_NET \ | CFG_CMD_FLASH \ | CFG_CMD_IMLS)) #endif +/* USB */ +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_DOS_PARTITION 1 + +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE OHCI_REGS_BASE +#define CFG_USB_OHCI_SLOT_NAME "delta" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 3 + +#define LITTLEENDIAN 1 /* used by usb_ohci.c */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 04f1f24..2cf78a3 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -101,12 +101,18 @@ #undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ -#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_OHCI_NEW 1 #define CONFIG_USB_KEYBOARD 1 #define CONFIG_USB_STORAGE 1 #define CONFIG_DOS_PARTITION 1 #define CONFIG_AT91C_PQFP_UHPBUG 1 +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE +#define CFG_USB_OHCI_SLOT_NAME "at91rm9200" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + #undef CONFIG_HARD_I2C #ifdef CONFIG_HARD_I2C @@ -127,7 +133,7 @@ #define CONFIG_COMMANDS \ ((CONFIG_CMD_DFL | \ CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ + CFG_CMD_DHCP | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_NFS | \ @@ -136,7 +142,7 @@ #else #define CONFIG_COMMANDS \ ((CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ + CFG_CMD_DHCP | \ CFG_CMD_NFS | \ CFG_CMD_SNTP | \ CFG_CMD_USB | \ @@ -156,7 +162,7 @@ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ +#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ #define CFG_MEMTEST_START PHYS_SDRAM #define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 diff --git a/include/configs/trab.h b/include/configs/trab.h index a2dc8e7..acf86d0 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -80,10 +80,16 @@ #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* USB stuff */ -#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_OHCI_NEW 1 #define CONFIG_USB_STORAGE 1 #define CONFIG_DOS_PARTITION 1 +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE S3C24X0_USB_HOST_BASE +#define CFG_USB_OHCI_SLOT_NAME "s3c2400" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + /* * Size of malloc() pool */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index b68ae54..0a41dff 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -232,9 +232,15 @@ #ifdef CONFIG_440EP /* USB */ -#define CONFIG_USB_OHCI +#define CONFIG_USB_OHCI_NEW #define CONFIG_USB_STORAGE +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE (CFG_PERIPHERAL_BASE | 0x1000) +#define CFG_USB_OHCI_SLOT_NAME "ppc440" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + /* Comment this out to enable USB 1.1 device */ #define USB_2_0_DEVICE diff --git a/include/da9030.h b/include/da9030.h index 41108b9..3e3b202 100644 --- a/include/da9030.h +++ b/include/da9030.h @@ -104,3 +104,15 @@ #define SYS_CONTROL_A_HWRES_ENABLE (1<<2) #define SYS_CONTROL_A_WDOG_ACTION (1<<3) #define SYS_CONTROL_A_WATCHDOG (1<<7) + +#define MISC_CONTROLB_USB_INT_RISING (1<<2) +#define MISC_CONTROLB_SESSION_VALID_EN (1<<3) + +#define USB_PUMP_USBVE (1<<0) +#define USB_PUMP_USBVEP (1<<1) +#define USB_PUMP_SRP_DETECT (1<<2) +#define USB_PUMP_SESSION_VALID (1<<3) +#define USB_PUMP_VBUS_VALID_4_0 (1<<4) +#define USB_PUMP_VBUS_VALID_4_4 (1<<5) +#define USB_PUMP_EN_USBVE (1<<6) +#define USB_PUMP_EN_USBVEP (1<<7) diff --git a/include/usb.h b/include/usb.h index bf71554..504ccc4 100644 --- a/include/usb.h +++ b/include/usb.h @@ -169,7 +169,10 @@ struct usb_device { * this is how the lowlevel part communicate with the outer world */ -#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || defined (CONFIG_USB_SL811HS) +#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \ + defined(CONFIG_USB_OHCI_NEW) || defined (CONFIG_USB_SL811HS) || \ + defined(CONFIG_USB_ISP116X_HCD) + int usb_lowlevel_init(void); int usb_lowlevel_stop(void); int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len); @@ -230,16 +233,12 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate); /* big endian -> little endian conversion */ /* some CPUs are already little endian e.g. the ARM920T */ -#ifdef LITTLEENDIAN -#define swap_16(x) ((unsigned short)(x)) -#define swap_32(x) ((unsigned long)(x)) -#else -#define swap_16(x) \ +#define __swap_16(x) \ ({ unsigned short x_ = (unsigned short)x; \ (unsigned short)( \ ((x_ & 0x00FFU) << 8) | ((x_ & 0xFF00U) >> 8) ); \ }) -#define swap_32(x) \ +#define __swap_32(x) \ ({ unsigned long x_ = (unsigned long)x; \ (unsigned long)( \ ((x_ & 0x000000FFUL) << 24) | \ @@ -247,6 +246,13 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate); ((x_ & 0x00FF0000UL) >> 8) | \ ((x_ & 0xFF000000UL) >> 24) ); \ }) + +#ifdef LITTLEENDIAN +# define swap_16(x) (x) +# define swap_32(x) (x) +#else +# define swap_16(x) __swap_16(x) +# define swap_32(x) __swap_32(x) #endif /* LITTLEENDIAN */ /* diff --git a/include/usb_cdc_acm.h b/include/usb_cdc_acm.h new file mode 100644 index 0000000..87bf50c --- /dev/null +++ b/include/usb_cdc_acm.h @@ -0,0 +1,43 @@ +/* + * (C) Copyright 2006 + * Bryan O'Donoghue, deckard@codehermit.ie, CodeHermit + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* ACM Control Requests */ +#define ACM_SEND_ENCAPSULATED_COMMAND 0x00 +#define ACM_GET_ENCAPSULATED_RESPONSE 0x01 +#define ACM_SET_COMM_FEATURE 0x02 +#define ACM_GET_COMM_FEATRUE 0x03 +#define ACM_CLEAR_COMM_FEATURE 0x04 +#define ACM_SET_LINE_ENCODING 0x20 +#define ACM_GET_LINE_ENCODING 0x21 +#define ACM_SET_CONTROL_LINE_STATE 0x22 +#define ACM_SEND_BREAK 0x23 + +/* ACM Notification Codes */ +#define ACM_NETWORK_CONNECTION 0x00 +#define ACM_RESPONSE_AVAILABLE 0x01 +#define ACM_SERIAL_STATE 0x20 + +/* Format of response expected by a ACM_GET_LINE_ENCODING request */ +struct rs232_emu{ + unsigned long dter; + unsigned char stop_bits; + unsigned char parity; + unsigned char data_bits; +}__attribute__((packed)); diff --git a/include/usbdcore.h b/include/usbdcore.h index 6e92df1..cb2be72 100644 --- a/include/usbdcore.h +++ b/include/usbdcore.h @@ -576,6 +576,9 @@ struct usb_device_instance { void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data); + /* Do cdc device specific control requests */ + int (*cdc_recv_setup)(struct usb_device_request *request, struct urb *urb); + /* bus interface */ struct usb_bus_instance *bus; /* which bus interface driver */ diff --git a/include/usbdcore_mpc8xx.h b/include/usbdcore_mpc8xx.h new file mode 100644 index 0000000..9df62f4 --- /dev/null +++ b/include/usbdcore_mpc8xx.h @@ -0,0 +1,210 @@ +/* + * Copyright (C) 2006 Bryan O'Donoghue, CodeHermit + * bodonoghue@codehermit.ie + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <commproc.h> + +/* Mode Register */ +#define USMOD_EN 0x01 +#define USMOD_HOST 0x02 +#define USMOD_TEST 0x04 +#define USMOD_SFTE 0x08 +#define USMOD_RESUME 0x40 +#define USMOD_LSS 0x80 + +/* Endpoint Registers */ +#define USEP_RHS_NORM 0x00 +#define USEP_RHS_IGNORE 0x01 +#define USEP_RHS_NAK 0x02 +#define USEP_RHS_STALL 0x03 + +#define USEP_THS_NORM 0x00 +#define USEP_THS_IGNORE 0x04 +#define USEP_THS_NAK 0x08 +#define USEP_THS_STALL 0x0C + +#define USEP_RTE 0x10 +#define USEP_MF 0x20 + +#define USEP_TM_CONTROL 0x00 +#define USEP_TM_INT 0x100 +#define USEP_TM_BULK 0x200 +#define USEP_TM_ISO 0x300 + +/* Command Register */ +#define USCOM_EP0 0x00 +#define USCOM_EP1 0x01 +#define USCOM_EP2 0x02 +#define USCOM_EP3 0x03 + +#define USCOM_FLUSH 0x40 +#define USCOM_STR 0x80 + +/* Event Register */ +#define USB_E_RXB 0x0001 +#define USB_E_TXB 0x0002 +#define USB_E_BSY 0x0004 +#define USB_E_SOF 0x0008 +#define USB_E_TXE1 0x0010 +#define USB_E_TXE2 0x0020 +#define USB_E_TXE3 0x0040 +#define USB_E_TXE4 0x0080 +#define USB_TX_ERRMASK (USB_E_TXE1|USB_E_TXE2|USB_E_TXE3|USB_E_TXE4) +#define USB_E_IDLE 0x0100 +#define USB_E_RESET 0x0200 + +/* Mask Register */ +#define USBS_IDLE 0x01 + +/* RX Buffer Descriptor */ +#define RX_BD_OV 0x02 +#define RX_BD_CR 0x04 +#define RX_BD_AB 0x08 +#define RX_BD_NO 0x10 +#define RX_BD_PID_DATA0 0x00 +#define RX_BD_PID_DATA1 0x40 +#define RX_BD_PID_SETUP 0x80 +#define RX_BD_F 0x400 +#define RX_BD_L 0x800 +#define RX_BD_I 0x1000 +#define RX_BD_W 0x2000 +#define RX_BD_E 0x8000 + +/* Useful masks */ +#define RX_BD_PID_BITMASK (RX_BD_PID_DATA1 | RX_BD_PID_SETUP) +#define STALL_BITMASK (USEP_THS_STALL | USEP_RHS_STALL) +#define NAK_BITMASK (USEP_THS_NAK | USEP_RHS_NAK) +#define CBD_TX_BITMASK (TX_BD_R | TX_BD_L | TX_BD_TC | TX_BD_I | TX_BD_CNF) + +/* TX Buffer Descriptor */ +#define TX_BD_UN 0x02 +#define TX_BD_TO 0x04 +#define TX_BD_NO_PID 0x00 +#define TX_BD_PID_DATA0 0x80 +#define TX_BD_PID_DATA1 0xC0 +#define TX_BD_CNF 0x200 +#define TX_BD_TC 0x400 +#define TX_BD_L 0x800 +#define TX_BD_I 0x1000 +#define TX_BD_W 0x2000 +#define TX_BD_R 0x8000 + +/* Implementation specific defines */ + +#define EP_MIN_PACKET_SIZE 0x08 +#define MAX_ENDPOINTS 0x04 +#define FIFO_SIZE 0x10 +#define EP_MAX_PKT FIFO_SIZE +#define TX_RING_SIZE 0x04 +#define RX_RING_SIZE 0x06 +#define USB_MAX_PKT 0x40 +#define TOGGLE_TX_PID(x) x= ((~x)&0x40)|0x80 +#define TOGGLE_RX_PID(x) x^= 0x40 +#define EP_ATTACHED 0x01 /* Endpoint has a urb attached or not */ +#define EP_SEND_ZLP 0x02 /* Send ZLP y/n ? */ + +#define PROFF_USB 0x00000000 +#define CPM_USB_BASE 0x00000A00 + +/* UDC device defines */ +#define EP0_MAX_PACKET_SIZE EP_MAX_PKT +#define UDC_OUT_ENDPOINT 0x02 +#define UDC_OUT_PACKET_SIZE EP_MIN_PACKET_SIZE +#define UDC_IN_ENDPOINT 0x03 +#define UDC_IN_PACKET_SIZE EP_MIN_PACKET_SIZE +#define UDC_INT_ENDPOINT 0x01 +#define UDC_INT_PACKET_SIZE UDC_IN_PACKET_SIZE +#define UDC_BULK_PACKET_SIZE EP_MIN_PACKET_SIZE + +struct mpc8xx_ep { + struct urb * urb; + unsigned char pid; + unsigned char sc; + volatile cbd_t * prx; +}; + +typedef struct mpc8xx_usb{ + char usmod; /* Mode Register */ + char usaddr; /* Slave Address Register */ + char uscom; /* Command Register */ + char res1; /* Reserved */ + ushort usep[4]; + ulong res2; /* Reserved */ + ushort usber; /* Event Register */ + ushort res3; /* Reserved */ + ushort usbmr; /* Mask Register */ + char res4; /* Reserved */ + char usbs; /* Status Register */ + char res5[8]; /* Reserved */ +}usb_t; + +typedef struct mpc8xx_parameter_ram{ + ushort ep0ptr; /* Endpoint Pointer Register 0 */ + ushort ep1ptr; /* Endpoint Pointer Register 1 */ + ushort ep2ptr; /* Endpoint Pointer Register 2 */ + ushort ep3ptr; /* Endpoint Pointer Register 3 */ + uint rstate; /* Receive state */ + uint rptr; /* Receive internal data pointer */ + ushort frame_n; /* Frame number */ + ushort rbcnt; /* Receive byte count */ + uint rtemp; /* Receive temp cp use only */ + uint rxusb; /* Rx Data Temp */ + ushort rxuptr; /* Rx microcode return address temp */ +}usb_pram_t; + +typedef struct endpoint_parameter_block_pointer{ + ushort rbase; /* RxBD base address */ + ushort tbase; /* TxBD base address */ + char rfcr; /* Rx Function code */ + char tfcr; /* Tx Function code */ + ushort mrblr; /* Maximum Receive Buffer Length */ + ushort rbptr; /* RxBD pointer Next Buffer Descriptor */ + ushort tbptr; /* TxBD pointer Next Buffer Descriptor */ + ulong tstate; /* Transmit internal state */ + ulong tptr; /* Transmit internal data pointer */ + ushort tcrc; /* Transmit temp CRC */ + ushort tbcnt; /* Transmit internal bye count */ + ulong ttemp; /* Tx temp */ + ushort txuptr; /* Tx microcode return address */ + ushort res1; /* Reserved */ +}usb_epb_t; + +typedef enum mpc8xx_udc_state{ + STATE_NOT_READY, + STATE_ERROR, + STATE_READY, +}mpc8xx_udc_state_t; + +/* Declarations */ +int udc_init(void); +void udc_irq(void); +int udc_endpoint_write(struct usb_endpoint_instance *endpoint); +void udc_setup_ep(struct usb_device_instance *device, unsigned int ep, + struct usb_endpoint_instance *endpoint); +void udc_connect(void); +void udc_disconnect(void); +void udc_enable(struct usb_device_instance *device); +void udc_disable(void); +void udc_startup_events(struct usb_device_instance *device); + +/* Flow control */ +void udc_set_nak(int epid); +void udc_unset_nak (int epid); diff --git a/include/usbdcore_omap1510.h b/include/usbdcore_omap1510.h index 6ea3331..526fcd9 100644 --- a/include/usbdcore_omap1510.h +++ b/include/usbdcore_omap1510.h @@ -161,10 +161,20 @@ #define UDC_VBUS_CTRL (1 << 19) #define UDC_VBUS_MODE (1 << 18) - -void omap1510_udc_irq(void); -void omap1510_udc_noniso_irq(void); - +/* OMAP Endpoint parameters */ +#define EP0_MAX_PACKET_SIZE 64 +#define UDC_OUT_ENDPOINT 2 +#define UDC_OUT_PACKET_SIZE 64 +#define UDC_IN_ENDPOINT 1 +#define UDC_IN_PACKET_SIZE 64 +#define UDC_INT_ENDPOINT 5 +#define UDC_INT_PKTSIZE 16 +#define UDC_BULK_PKTSIZE 16 + +void udc_irq (void); +/* Flow control */ +void udc_set_nak(int epid); +void udc_unset_nak (int epid); /* Higher level functions for abstracting away from specific device */ void udc_endpoint_write(struct usb_endpoint_instance *endpoint); diff --git a/include/usbdescriptors.h b/include/usbdescriptors.h index 2d9f739..a752097 100644 --- a/include/usbdescriptors.h +++ b/include/usbdescriptors.h @@ -92,33 +92,42 @@ #define COMMUNICATIONS_DEVICE_CLASS 0x02 /* c.f. CDC 4.2 Table 15 */ -#define COMMUNICATIONS_INTERFACE_CLASS 0x02 +#define COMMUNICATIONS_INTERFACE_CLASS_CONTROL 0x02 +#define COMMUNICATIONS_INTERFACE_CLASS_DATA 0x0A +#define COMMUNICATIONS_INTERFACE_CLASS_VENDOR 0x0FF /* c.f. CDC 4.3 Table 16 */ -#define COMMUNICATIONS_NO_SUBCLASS 0x00 +#define COMMUNICATIONS_NO_SUBCLASS 0x00 #define COMMUNICATIONS_DLCM_SUBCLASS 0x01 -#define COMMUNICATIONS_ACM_SUBCLASS 0x02 -#define COMMUNICATIONS_TCM_SUBCLASS 0x03 +#define COMMUNICATIONS_ACM_SUBCLASS 0x02 +#define COMMUNICATIONS_TCM_SUBCLASS 0x03 #define COMMUNICATIONS_MCCM_SUBCLASS 0x04 -#define COMMUNICATIONS_CCM_SUBCLASS 0x05 +#define COMMUNICATIONS_CCM_SUBCLASS 0x05 #define COMMUNICATIONS_ENCM_SUBCLASS 0x06 #define COMMUNICATIONS_ANCM_SUBCLASS 0x07 /* c.f. WMCD 5.1 */ #define COMMUNICATIONS_WHCM_SUBCLASS 0x08 -#define COMMUNICATIONS_DMM_SUBCLASS 0x09 +#define COMMUNICATIONS_DMM_SUBCLASS 0x09 #define COMMUNICATIONS_MDLM_SUBCLASS 0x0a #define COMMUNICATIONS_OBEX_SUBCLASS 0x0b -/* c.f. CDC 4.6 Table 18 */ +/* c.f. CDC 4.4 Table 17 */ +#define COMMUNICATIONS_NO_PROTOCOL 0x00 +#define COMMUNICATIONS_V25TER_PROTOCOL 0x01 /*Common AT Hayes compatible*/ + +/* c.f. CDC 4.5 Table 18 */ #define DATA_INTERFACE_CLASS 0x0a +/* c.f. CDC 4.6 No Table */ +#define DATA_INTERFACE_SUBCLASS_NONE 0x00 /* No subclass pertinent */ + /* c.f. CDC 4.7 Table 19 */ -#define COMMUNICATIONS_NO_PROTOCOL 0x00 +#define DATA_INTERFACE_PROTOCOL_NONE 0x00 /* No class protcol required */ /* c.f. CDC 5.2.3 Table 24 */ -#define CS_INTERFACE 0x24 +#define CS_INTERFACE 0x24 #define CS_ENDPOINT 0x25 /* @@ -128,7 +137,7 @@ * c.f. WMCD 5.3 Table 5.3 */ -#define USB_ST_HEADER 0x00 +#define USB_ST_HEADER 0x00 #define USB_ST_CMF 0x01 #define USB_ST_ACMF 0x02 #define USB_ST_DLMF 0x03 @@ -137,18 +146,18 @@ #define USB_ST_UF 0x06 #define USB_ST_CSF 0x07 #define USB_ST_TOMF 0x08 -#define USB_ST_USBTF 0x09 +#define USB_ST_USBTF 0x09 #define USB_ST_NCT 0x0a #define USB_ST_PUF 0x0b #define USB_ST_EUF 0x0c #define USB_ST_MCMF 0x0d #define USB_ST_CCMF 0x0e #define USB_ST_ENF 0x0f -#define USB_ST_ATMNF 0x10 +#define USB_ST_ATMNF 0x10 #define USB_ST_WHCM 0x11 #define USB_ST_MDLM 0x12 -#define USB_ST_MDLMD 0x13 +#define USB_ST_MDLMD 0x13 #define USB_ST_DMM 0x14 #define USB_ST_OBEX 0x15 #define USB_ST_CS 0x16 @@ -312,7 +321,8 @@ struct usb_class_union_function_descriptor { u8 bDescriptorType; u8 bDescriptorSubtype; /* 0x06 */ u8 bMasterInterface; - u8 bSlaveInterface0[0]; + /* u8 bSlaveInterface0[0]; */ + u8 bSlaveInterface0; } __attribute__ ((packed)); struct usb_class_country_selection_descriptor { |