diff options
| -rw-r--r-- | cpu/mpc85xx/Makefile | 12 | ||||
| -rw-r--r-- | cpu/mpc85xx/spd_sdram.c | 1154 | ||||
| -rw-r--r-- | include/configs/TQM85xx.h | 4 |
3 files changed, 4 insertions, 1166 deletions
diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile index 3a3c6a7..80b80ff 100644 --- a/cpu/mpc85xx/Makefile +++ b/cpu/mpc85xx/Makefile @@ -35,15 +35,12 @@ COBJS-$(CONFIG_MP) += mp.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o # supports ddr1 -ifeq ($(CONFIG_FSL_DDR1),y) COBJS-$(CONFIG_MPC8540) += ddr-gen1.o COBJS-$(CONFIG_MPC8560) += ddr-gen1.o COBJS-$(CONFIG_MPC8541) += ddr-gen1.o COBJS-$(CONFIG_MPC8555) += ddr-gen1.o -endif # supports ddr1/2 -ifeq ($(CONFIG_FSL_DDR2),y) COBJS-$(CONFIG_MPC8548) += ddr-gen2.o COBJS-$(CONFIG_MPC8568) += ddr-gen2.o COBJS-$(CONFIG_MPC8544) += ddr-gen2.o @@ -51,15 +48,6 @@ COBJS-$(CONFIG_MPC8544) += ddr-gen2.o # supports ddr1/2/3 COBJS-$(CONFIG_MPC8572) += ddr-gen3.o COBJS-$(CONFIG_MPC8536) += ddr-gen3.o -endif - -ifneq ($(CONFIG_FSL_DDR3),y) -ifneq ($(CONFIG_FSL_DDR2),y) -ifneq ($(CONFIG_FSL_DDR1),y) -COBJS-y += spd_sdram.o -endif -endif -endif COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o tlb.o \ pci.o serial_scc.o commproc.o ether_fcc.o qe_io.o \ diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c deleted file mode 100644 index 8e321eb..0000000 --- a/cpu/mpc85xx/spd_sdram.c +++ /dev/null @@ -1,1154 +0,0 @@ -/* - * Copyright 2004, 2007 Freescale Semiconductor. - * (C) Copyright 2003 Motorola Inc. - * Xianghua Xiao (X.Xiao@motorola.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/processor.h> -#include <i2c.h> -#include <spd.h> -#include <asm/mmu.h> -#include <asm/fsl_law.h> - - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void dma_init(void); -extern uint dma_check(void); -extern int dma_xfer(void *dest, uint count, void *src); -#endif - -#ifdef CONFIG_SPD_EEPROM - -#ifndef CFG_READ_SPD -#define CFG_READ_SPD i2c_read -#endif - -static unsigned int setup_laws_and_tlbs(unsigned int memsize); - - -/* - * Convert picoseconds into clock cycles (rounding up if needed). - */ - -int -picos_to_clk(int picos) -{ - int clks; - - clks = picos / (2000000000 / (get_ddr_freq(0) / 1000)); - if (picos % (2000000000 / (get_ddr_freq(0) / 1000)) != 0) { - clks++; - } - - return clks; -} - - -/* - * Calculate the Density of each Physical Rank. - * Returned size is in bytes. - * - * Study these table from Byte 31 of JEDEC SPD Spec. - * - * DDR I DDR II - * Bit Size Size - * --- ----- ------ - * 7 high 512MB 512MB - * 6 256MB 256MB - * 5 128MB 128MB - * 4 64MB 16GB - * 3 32MB 8GB - * 2 16MB 4GB - * 1 2GB 2GB - * 0 low 1GB 1GB - * - * Reorder Table to be linear by stripping the bottom - * 2 or 5 bits off and shifting them up to the top. - */ - -unsigned int -compute_banksize(unsigned int mem_type, unsigned char row_dens) -{ - unsigned int bsize; - - if (mem_type == SPD_MEMTYPE_DDR) { - /* Bottom 2 bits up to the top. */ - bsize = ((row_dens >> 2) | ((row_dens & 3) << 6)) << 24; - debug("DDR: DDR I rank density = 0x%08x\n", bsize); - } else { - /* Bottom 5 bits up to the top. */ - bsize = ((row_dens >> 5) | ((row_dens & 31) << 3)) << 27; - debug("DDR: DDR II rank density = 0x%08x\n", bsize); - } - return bsize; -} - - -/* - * Convert a two-nibble BCD value into a cycle time. - * While the spec calls for nano-seconds, picos are returned. - * - * This implements the tables for bytes 9, 23 and 25 for both - * DDR I and II. No allowance for distinguishing the invalid - * fields absent for DDR I yet present in DDR II is made. - * (That is, cycle times of .25, .33, .66 and .75 ns are - * allowed for both DDR II and I.) - */ - -unsigned int -convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val) -{ - /* - * Table look up the lower nibble, allow DDR I & II. - */ - unsigned int tenths_ps[16] = { - 0, - 100, - 200, - 300, - 400, - 500, - 600, - 700, - 800, - 900, - 250, - 330, - 660, - 750, - 0, /* undefined */ - 0 /* undefined */ - }; - - unsigned int whole_ns = (spd_val & 0xF0) >> 4; - unsigned int tenth_ns = spd_val & 0x0F; - unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns]; - - return ps; -} - - -/* - * Determine Refresh Rate. Ignore self refresh bit on DDR I. - * Table from SPD Spec, Byte 12, converted to picoseconds and - * filled in with "default" normal values. - */ -unsigned int determine_refresh_rate(unsigned int spd_refresh) -{ - unsigned int refresh_time_ns[8] = { - 15625000, /* 0 Normal 1.00x */ - 3900000, /* 1 Reduced .25x */ - 7800000, /* 2 Extended .50x */ - 31300000, /* 3 Extended 2.00x */ - 62500000, /* 4 Extended 4.00x */ - 125000000, /* 5 Extended 8.00x */ - 15625000, /* 6 Normal 1.00x filler */ - 15625000, /* 7 Normal 1.00x filler */ - }; - - return picos_to_clk(refresh_time_ns[spd_refresh & 0x7]); -} - - -long int -spd_sdram(void) -{ - volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR); - spd_eeprom_t spd; - unsigned int n_ranks; - unsigned int rank_density; - unsigned int odt_rd_cfg, odt_wr_cfg, ba_bits; - unsigned int odt_cfg, mode_odt_enable; - unsigned int refresh_clk; -#ifdef MPC85xx_DDR_SDRAM_CLK_CNTL - unsigned char clk_adjust; -#endif - unsigned int dqs_cfg; - unsigned char twr_clk, twtr_clk, twr_auto_clk; - unsigned int tCKmin_ps, tCKmax_ps; - unsigned int max_data_rate, effective_data_rate; - unsigned int busfreq; - unsigned sdram_cfg; - unsigned int memsize = 0; - unsigned char caslat, caslat_ctrl; - unsigned int trfc, trfc_clk, trfc_low, trfc_high; - unsigned int trcd_clk; - unsigned int trtp_clk; - unsigned char cke_min_clk; - unsigned char add_lat; - unsigned char wr_lat; - unsigned char wr_data_delay; - unsigned char four_act; - unsigned char cpo; - unsigned char burst_len; - unsigned int mode_caslat; - unsigned char sdram_type; - unsigned char d_init; - unsigned int bnds; - - /* - * Skip configuration if already configured. - * memsize is determined from last configured chip select. - */ - if (ddr->cs0_config & 0x80000000) { - debug(" cs0 already configured, bnds=%x\n",ddr->cs0_bnds); - bnds = 0xfff & ddr->cs0_bnds; - if (bnds < 0xff) { /* do not add if at top of 4G */ - memsize = (bnds + 1) << 4; - } - } - if (ddr->cs1_config & 0x80000000) { - debug(" cs1 already configured, bnds=%x\n",ddr->cs1_bnds); - bnds = 0xfff & ddr->cs1_bnds; - if (bnds < 0xff) { /* do not add if at top of 4G */ - memsize = (bnds + 1) << 4; /* assume ordered bnds */ - } - } - if (ddr->cs2_config & 0x80000000) { - debug(" cs2 already configured, bnds=%x\n",ddr->cs2_bnds); - bnds = 0xfff & ddr->cs2_bnds; - if (bnds < 0xff) { /* do not add if at top of 4G */ - memsize = (bnds + 1) << 4; - } - } - if (ddr->cs3_config & 0x80000000) { - debug(" cs3 already configured, bnds=%x\n",ddr->cs3_bnds); - bnds = 0xfff & ddr->cs3_bnds; - if (bnds < 0xff) { /* do not add if at top of 4G */ - memsize = (bnds + 1) << 4; - } - } - - if (memsize) { - printf(" Reusing current %dMB configuration\n",memsize); - memsize = setup_laws_and_tlbs(memsize); - return memsize << 20; - } - - /* - * Read SPD information. - */ - CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) &spd, sizeof(spd)); - - /* - * Check for supported memory module types. - */ - if (spd.mem_type != SPD_MEMTYPE_DDR && - spd.mem_type != SPD_MEMTYPE_DDR2) { - printf("Unable to locate DDR I or DDR II module.\n" - " Fundamental memory type is 0x%0x\n", - spd.mem_type); - return 0; - } - - /* - * These test gloss over DDR I and II differences in interpretation - * of bytes 3 and 4, but irrelevantly. Multiple asymmetric banks - * are not supported on DDR I; and not encoded on DDR II. - * - * Also note that the 8548 controller can support: - * 12 <= nrow <= 16 - * and - * 8 <= ncol <= 11 (still, for DDR) - * 6 <= ncol <= 9 (for FCRAM) - */ - if (spd.nrow_addr < 12 || spd.nrow_addr > 14) { - printf("DDR: Unsupported number of Row Addr lines: %d.\n", - spd.nrow_addr); - return 0; - } - if (spd.ncol_addr < 8 || spd.ncol_addr > 11) { - printf("DDR: Unsupported number of Column Addr lines: %d.\n", - spd.ncol_addr); - return 0; - } - - /* - * Determine the number of physical banks controlled by - * different Chip Select signals. This is not quite the - * same as the number of DIMM modules on the board. Feh. - */ - if (spd.mem_type == SPD_MEMTYPE_DDR) { - n_ranks = spd.nrows; - } else { - n_ranks = (spd.nrows & 0x7) + 1; - } - - debug("DDR: number of ranks = %d\n", n_ranks); - - if (n_ranks > 2) { - printf("DDR: Only 2 chip selects are supported: %d\n", - n_ranks); - return 0; - } - -#ifdef CONFIG_MPC8548 - /* - * Adjust DDR II IO voltage biasing. - * Only 8548 rev 1 needs the fix - */ - if ((SVR_SOC_VER(get_svr()) == SVR_8548_E) && - (SVR_MJREV(get_svr()) == 1) && - (spd.mem_type == SPD_MEMTYPE_DDR2)) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - gur->ddrioovcr = (0x80000000 /* Enable */ - | 0x10000000);/* VSEL to 1.8V */ - } -#endif - - /* - * Determine the size of each Rank in bytes. - */ - rank_density = compute_banksize(spd.mem_type, spd.row_dens); - - - /* - * Eg: Bounds: 0x0000_0000 to 0x0f000_0000 first 256 Meg - */ - ddr->cs0_bnds = (rank_density >> 24) - 1; - - /* - * ODT configuration recommendation from DDR Controller Chapter. - */ - odt_rd_cfg = 0; /* Never assert ODT */ - odt_wr_cfg = 0; /* Never assert ODT */ - if (spd.mem_type == SPD_MEMTYPE_DDR2) { - odt_wr_cfg = 1; /* Assert ODT on writes to CS0 */ -#if 0 - /* FIXME: How to determine the number of dimm modules? */ - if (n_dimm_modules == 2) { - odt_rd_cfg = 1; /* Assert ODT on reads to CS0 */ - } -#endif - } - - ba_bits = 0; - if (spd.nbanks == 0x8) - ba_bits = 1; - - ddr->cs0_config = ( 1 << 31 - | (odt_rd_cfg << 20) - | (odt_wr_cfg << 16) - | (ba_bits << 14) - | (spd.nrow_addr - 12) << 8 - | (spd.ncol_addr - 8) ); - debug("\n"); - debug("DDR: cs0_bnds = 0x%08x\n", ddr->cs0_bnds); - debug("DDR: cs0_config = 0x%08x\n", ddr->cs0_config); - - if (n_ranks == 2) { - /* - * Eg: Bounds: 0x0f00_0000 to 0x1e0000_0000, second 256 Meg - */ - ddr->cs1_bnds = ( (rank_density >> 8) - | ((rank_density >> (24 - 1)) - 1) ); - ddr->cs1_config = ( 1<<31 - | (odt_rd_cfg << 20) - | (odt_wr_cfg << 16) - | (spd.nrow_addr - 12) << 8 - | (spd.ncol_addr - 8) ); - debug("DDR: cs1_bnds = 0x%08x\n", ddr->cs1_bnds); - debug("DDR: cs1_config = 0x%08x\n", ddr->cs1_config); - } - - - /* - * Find the largest CAS by locating the highest 1 bit - * in the spd.cas_lat field. Translate it to a DDR - * controller field value: - * - * CAS Lat DDR I DDR II Ctrl - * Clocks SPD Bit SPD Bit Value - * ------- ------- ------- ----- - * 1.0 0 0001 - * 1.5 1 0010 - * 2.0 2 2 0011 - * 2.5 3 0100 - * 3.0 4 3 0101 - * 3.5 5 0110 - * 4.0 4 0111 - * 4.5 1000 - * 5.0 5 1001 - */ - caslat = __ilog2(spd.cas_lat); - if ((spd.mem_type == SPD_MEMTYPE_DDR) - && (caslat > 5)) { - printf("DDR I: Invalid SPD CAS Latency: 0x%x.\n", spd.cas_lat); - return 0; - - } else if (spd.mem_type == SPD_MEMTYPE_DDR2 - && (caslat < 2 || caslat > 5)) { - printf("DDR II: Invalid SPD CAS Latency: 0x%x.\n", - spd.cas_lat); - return 0; - } - debug("DDR: caslat SPD bit is %d\n", caslat); - - /* - * Calculate the Maximum Data Rate based on the Minimum Cycle time. - * The SPD clk_cycle field (tCKmin) is measured in tenths of - * nanoseconds and represented as BCD. - */ - tCKmin_ps = convert_bcd_tenths_to_cycle_time_ps(spd.clk_cycle); - debug("DDR: tCKmin = %d ps\n", tCKmin_ps); - - /* - * Double-data rate, scaled 1000 to picoseconds, and back down to MHz. - */ - max_data_rate = 2 * 1000 * 1000 / tCKmin_ps; - debug("DDR: Module max data rate = %d Mhz\n", max_data_rate); - - - /* - * Adjust the CAS Latency to allow for bus speeds that - * are slower than the DDR module. - */ - busfreq = get_ddr_freq(0) / 1000000; /* MHz */ - - effective_data_rate = max_data_rate; - if (busfreq < 90) { - /* DDR rate out-of-range */ - puts("DDR: platform frequency is not fit for DDR rate\n"); - return 0; - - } else if (90 <= busfreq && busfreq < 230 && max_data_rate >= 230) { - /* - * busfreq 90~230 range, treated as DDR 200. - */ - effective_data_rate = 200; - if (spd.clk_cycle3 == 0xa0) /* 10 ns */ - caslat -= 2; - else if (spd.clk_cycle2 == 0xa0) - caslat--; - - } else if (230 <= busfreq && busfreq < 280 && max_data_rate >= 280) { - /* - * busfreq 230~280 range, treated as DDR 266. - */ - effective_data_rate = 266; - if (spd.clk_cycle3 == 0x75) /* 7.5 ns */ - caslat -= 2; - else if (spd.clk_cycle2 == 0x75) - caslat--; - - } else if (280 <= busfreq && busfreq < 350 && max_data_rate >= 350) { - /* - * busfreq 280~350 range, treated as DDR 333. - */ - effective_data_rate = 333; - if (spd.clk_cycle3 == 0x60) /* 6.0 ns */ - caslat -= 2; - else if (spd.clk_cycle2 == 0x60) - caslat--; - - } else if (350 <= busfreq && busfreq < 460 && max_data_rate >= 460) { - /* - * busfreq 350~460 range, treated as DDR 400. - */ - effective_data_rate = 400; - if (spd.clk_cycle3 == 0x50) /* 5.0 ns */ - caslat -= 2; - else if (spd.clk_cycle2 == 0x50) - caslat--; - - } else if (460 <= busfreq && busfreq < 560 && max_data_rate >= 560) { - /* - * busfreq 460~560 range, treated as DDR 533. - */ - effective_data_rate = 533; - if (spd.clk_cycle3 == 0x3D) /* 3.75 ns */ - caslat -= 2; - else if (spd.clk_cycle2 == 0x3D) - caslat--; - - } else if (560 <= busfreq && busfreq < 700 && max_data_rate >= 700) { - /* - * busfreq 560~700 range, treated as DDR 667. - */ - effective_data_rate = 667; - if (spd.clk_cycle3 == 0x30) /* 3.0 ns */ - caslat -= 2; - else if (spd.clk_cycle2 == 0x30) - caslat--; - - } else if (700 <= busfreq) { - /* - * DDR rate out-of-range - */ - printf("DDR: Bus freq %d MHz is not fit for DDR rate %d MHz\n", - busfreq, max_data_rate); - return 0; - } - - - /* - * Convert caslat clocks to DDR controller value. - * Force caslat_ctrl to be DDR Controller field-sized. - */ - if (spd.mem_type == SPD_MEMTYPE_DDR) { - caslat_ctrl = (caslat + 1) & 0x07; - } else { - caslat_ctrl = (2 * caslat - 1) & 0x0f; - } - - debug("DDR: effective data rate is %d MHz\n", effective_data_rate); - debug("DDR: caslat SPD bit is %d, controller field is 0x%x\n", - caslat, caslat_ctrl); - - /* - * Timing Config 0. - * Avoid writing for DDR I. The new PQ38 DDR controller - * dreams up non-zero default values to be backwards compatible. - */ - if (spd.mem_type == SPD_MEMTYPE_DDR2) { - unsigned char taxpd_clk = 8; /* By the book. */ - unsigned char tmrd_clk = 2; /* By the book. */ - unsigned char act_pd_exit = 2; /* Empirical? */ - unsigned char pre_pd_exit = 6; /* Empirical? */ - - ddr->timing_cfg_0 = (0 - | ((act_pd_exit & 0x7) << 20) /* ACT_PD_EXIT */ - | ((pre_pd_exit & 0x7) << 16) /* PRE_PD_EXIT */ - | ((taxpd_clk & 0xf) << 8) /* ODT_PD_EXIT */ - | ((tmrd_clk & 0xf) << 0) /* MRS_CYC */ - ); -#if 0 - ddr->timing_cfg_0 |= 0xaa000000; /* extra cycles */ -#endif - debug("DDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0); - - } else { -#if 0 - /* - * Force extra cycles with 0xaa bits. - * Incidentally supply the dreamt-up backwards compat value! - */ - ddr->timing_cfg_0 = 0x00110105; /* backwards compat value */ - ddr->timing_cfg_0 |= 0xaa000000; /* extra cycles */ - debug("DDR: HACK timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0); -#endif - } - - - /* - * Some Timing Config 1 values now. - * Sneak Extended Refresh Recovery in here too. - */ - - /* - * For DDR I, WRREC(Twr) and WRTORD(Twtr) are not in SPD, - * use conservative value. - * For DDR II, they are bytes 36 and 37, in quarter nanos. - */ - - if (spd.mem_type == SPD_MEMTYPE_DDR) { - twr_clk = 3; /* Clocks */ - twtr_clk = 1; /* Clocks */ - } else { - twr_clk = picos_to_clk(spd.twr * 250); - twtr_clk = picos_to_clk(spd.twtr * 250); - } - - /* - * Calculate Trfc, in picos. - * DDR I: Byte 42 straight up in ns. - * DDR II: Byte 40 and 42 swizzled some, in ns. - */ - if (spd.mem_type == SPD_MEMTYPE_DDR) { - trfc = spd.trfc * 1000; /* up to ps */ - } else { - unsigned int byte40_table_ps[8] = { - 0, - 250, - 330, - 500, - 660, - 750, - 0, - 0 - }; - - trfc = (((spd.trctrfc_ext & 0x1) * 256) + spd.trfc) * 1000 - + byte40_table_ps[(spd.trctrfc_ext >> 1) & 0x7]; - } - trfc_clk = picos_to_clk(trfc); - - /* - * Trcd, Byte 29, from quarter nanos to ps and clocks. - */ - trcd_clk = picos_to_clk(spd.trcd * 250) & 0x7; - - /* - * Convert trfc_clk to DDR controller fields. DDR I should - * fit in the REFREC field (16-19) of TIMING_CFG_1, but the - * 8548 controller has an extended REFREC field of three bits. - * The controller automatically adds 8 clocks to this value, - * so preadjust it down 8 first before splitting it up. - */ - trfc_low = (trfc_clk - 8) & 0xf; - trfc_high = ((trfc_clk - 8) >> 4) & 0x3; - - /* - * Sneak in some Extended Refresh Recovery. - */ - ddr->timing_cfg_3 = (trfc_high << 16); - debug("DDR: timing_cfg_3 = 0x%08x\n", ddr->timing_cfg_3); - - ddr->timing_cfg_1 = - (0 - | ((picos_to_clk(spd.trp * 250) & 0x07) << 28) /* PRETOACT */ - | ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24) /* ACTTOPRE */ - | (trcd_clk << 20) /* ACTTORW */ - | (caslat_ctrl << 16) /* CASLAT */ - | (trfc_low << 12) /* REFEC */ - | ((twr_clk & 0x07) << 8) /* WRRREC */ - | ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) /* ACTTOACT */ - | ((twtr_clk & 0x07) << 0) /* WRTORD */ - ); - - debug("DDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1); - - - /* - * Timing_Config_2 - * Was: 0x00000800; - */ - - /* - * Additive Latency - * For DDR I, 0. - * For DDR II, with ODT enabled, use "a value" less than ACTTORW, - * which comes from Trcd, and also note that: - * add_lat + caslat must be >= 4 - */ - add_lat = 0; - if (spd.mem_type == SPD_MEMTYPE_DDR2 - && (odt_wr_cfg || odt_rd_cfg) - && (caslat < 4)) { - add_lat = 4 - caslat; - if (add_lat > trcd_clk) { - add_lat = trcd_clk - 1; - } - } - - /* - * Write Data Delay - * Historically 0x2 == 4/8 clock delay. - * Empirically, 0x3 == 6/8 clock delay is suggested for DDR I 266. - */ - wr_data_delay = 3; - - /* - * Write Latency - * Read to Precharge - * Minimum CKE Pulse Width. - * Four Activate Window - */ - if (spd.mem_type == SPD_MEMTYPE_DDR) { - /* - * This is a lie. It should really be 1, but if it is - * set to 1, bits overlap into the old controller's - * otherwise unused ACSM field. If we leave it 0, then - * the HW will magically treat it as 1 for DDR 1. Oh Yea. - */ - wr_lat = 0; - - trtp_clk = 2; /* By the book. */ - cke_min_clk = 1; /* By the book. */ - four_act = 1; /* By the book. */ - - } else { - wr_lat = caslat - 1; - - /* Convert SPD value from quarter nanos to picos. */ - trtp_clk = picos_to_clk(spd.trtp * 250); - - cke_min_clk = 3; /* By the book. */ - four_act = picos_to_clk(37500); /* By the book. 1k pages? */ - } - - /* - * Empirically set ~MCAS-to-preamble override for DDR 2. - * Your milage will vary. - */ - cpo = 0; - if (spd.mem_type == SPD_MEMTYPE_DDR2) { - if (effective_data_rate <= 333) { - cpo = 0x7; /* READ_LAT + 5/4 */ - } else { - cpo = 0x9; /* READ_LAT + 7/4 */ - } - } - - ddr->timing_cfg_2 = (0 - | ((add_lat & 0x7) << 28) /* ADD_LAT */ - | ((cpo & 0x1f) << 23) /* CPO */ - | ((wr_lat & 0x7) << 19) /* WR_LAT */ - | ((trtp_clk & 0x7) << 13) /* RD_TO_PRE */ - | ((wr_data_delay & 0x7) << 10) /* WR_DATA_DELAY */ - | ((cke_min_clk & 0x7) << 6) /* CKE_PLS */ - | ((four_act & 0x1f) << 0) /* FOUR_ACT */ - ); - - debug("DDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2); - - - /* - * Determine the Mode Register Set. - * - * This is nominally part specific, but it appears to be - * consistent for all DDR I devices, and for all DDR II devices. - * - * caslat must be programmed - * burst length is always 4 - * burst type is sequential - * - * For DDR I: - * operating mode is "normal" - * - * For DDR II: - * other stuff - */ - - mode_caslat = 0; - - /* - * Table lookup from DDR I or II Device Operation Specs. - */ - if (spd.mem_type == SPD_MEMTYPE_DDR) { - if (1 <= caslat && caslat <= 4) { - unsigned char mode_caslat_table[4] = { - 0x5, /* 1.5 clocks */ - 0x2, /* 2.0 clocks */ - 0x6, /* 2.5 clocks */ - 0x3 /* 3.0 clocks */ - }; - mode_caslat = mode_caslat_table[caslat - 1]; - } else { - puts("DDR I: Only CAS Latencies of 1.5, 2.0, " - "2.5 and 3.0 clocks are supported.\n"); - return 0; - } - - } else { - if (2 <= caslat && caslat <= 5) { - mode_caslat = caslat; - } else { - puts("DDR II: Only CAS Latencies of 2.0, 3.0, " - "4.0 and 5.0 clocks are supported.\n"); - return 0; - } - } - - /* - * Encoded Burst Lenght of 4. - */ - burst_len = 2; /* Fiat. */ - - if (spd.mem_type == SPD_MEMTYPE_DDR) { - twr_auto_clk = 0; /* Historical */ - } else { - /* - * Determine tCK max in picos. Grab tWR and convert to picos. - * Auto-precharge write recovery is: - * WR = roundup(tWR_ns/tCKmax_ns). - * - * Ponder: Is twr_auto_clk different than twr_clk? - */ - tCKmax_ps = convert_bcd_tenths_to_cycle_time_ps(spd.tckmax); - twr_auto_clk = (spd.twr * 250 + tCKmax_ps - 1) / tCKmax_ps; - } - - - /* - * Mode Reg in bits 16 ~ 31, - * Extended Mode Reg 1 in bits 0 ~ 15. - */ - mode_odt_enable = 0x0; /* Default disabled */ - if (odt_wr_cfg || odt_rd_cfg) { - /* - * Bits 6 and 2 in Extended MRS(1) - * Bit 2 == 0x04 == 75 Ohm, with 2 DIMM modules. - * Bit 6 == 0x40 == 150 Ohm, with 1 DIMM module. - */ - mode_odt_enable = 0x40; /* 150 Ohm */ - } - - ddr->sdram_mode = - (0 - | (add_lat << (16 + 3)) /* Additive Latency in EMRS1 */ - | (mode_odt_enable << 16) /* ODT Enable in EMRS1 */ - | (twr_auto_clk << 9) /* Write Recovery Autopre */ - | (mode_caslat << 4) /* caslat */ - | (burst_len << 0) /* Burst length */ - ); - - debug("DDR: sdram_mode = 0x%08x\n", ddr->sdram_mode); - - - /* - * Clear EMRS2 and EMRS3. - */ - ddr->sdram_mode_2 = 0; - debug("DDR: sdram_mode_2 = 0x%08x\n", ddr->sdram_mode_2); - - /* - * Determine Refresh Rate. - */ - refresh_clk = determine_refresh_rate(spd.refresh & 0x7); - - /* - * Set BSTOPRE to 0x100 for page mode - * If auto-charge is used, set BSTOPRE = 0 - */ - ddr->sdram_interval = - (0 - | (refresh_clk & 0x3fff) << 16 - | 0x100 - ); - debug("DDR: sdram_interval = 0x%08x\n", ddr->sdram_interval); - - /* - * Is this an ECC DDR chip? - * But don't mess with it if the DDR controller will init mem. - */ -#ifdef CONFIG_DDR_ECC - if (spd.config == 0x02) { -#ifndef CONFIG_ECC_INIT_VIA_DDRCONTROLLER - ddr->err_disable = 0x0000000d; -#endif - ddr->err_sbe = 0x00ff0000; - } - - debug("DDR: err_disable = 0x%08x\n", ddr->err_disable); - debug("DDR: err_sbe = 0x%08x\n", ddr->err_sbe); -#endif /* CONFIG_DDR_ECC */ - - asm("sync;isync;msync"); - udelay(500); - - /* - * SDRAM Cfg 2 - */ - - /* - * When ODT is enabled, Chap 9 suggests asserting ODT to - * internal IOs only during reads. - */ - odt_cfg = 0; - if (odt_rd_cfg | odt_wr_cfg) { - odt_cfg = 0x2; /* ODT to IOs during reads */ - } - - /* - * Try to use differential DQS with DDR II. - */ - if (spd.mem_type == SPD_MEMTYPE_DDR) { - dqs_cfg = 0; /* No Differential DQS for DDR I */ - } else { - dqs_cfg = 0x1; /* Differential DQS for DDR II */ - } - -#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Use the DDR controller to auto initialize memory. - */ - d_init = 1; - ddr->sdram_data_init = CONFIG_MEM_INIT_VALUE; - debug("DDR: ddr_data_init = 0x%08x\n", ddr->sdram_data_init); -#else - /* - * Memory will be initialized via DMA, or not at all. - */ - d_init = 0; -#endif - - ddr->sdram_cfg_2 = (0 - | (dqs_cfg << 26) /* Differential DQS */ - | (odt_cfg << 21) /* ODT */ - | (d_init << 4) /* D_INIT auto init DDR */ - ); - - debug("DDR: sdram_cfg_2 = 0x%08x\n", ddr->sdram_cfg_2); - - -#ifdef MPC85xx_DDR_SDRAM_CLK_CNTL - /* - * Setup the clock control. - * SDRAM_CLK_CNTL[0] = Source synchronous enable == 1 - * SDRAM_CLK_CNTL[5-7] = Clock Adjust - * 0110 3/4 cycle late - * 0111 7/8 cycle late - */ - if (spd.mem_type == SPD_MEMTYPE_DDR) - clk_adjust = 0x6; - else -#ifdef CONFIG_MPC8568 - /* Empirally setting clk_adjust */ - clk_adjust = 0x6; -#else - clk_adjust = 0x7; -#endif - - ddr->sdram_clk_cntl = (0 - | 0x80000000 - | (clk_adjust << 23) - ); - debug("DDR: sdram_clk_cntl = 0x%08x\n", ddr->sdram_clk_cntl); -#endif - - /* - * Figure out the settings for the sdram_cfg register. - * Build up the entire register in 'sdram_cfg' before writing - * since the write into the register will actually enable the - * memory controller; all settings must be done before enabling. - * - * sdram_cfg[0] = 1 (ddr sdram logic enable) - * sdram_cfg[1] = 1 (self-refresh-enable) - * sdram_cfg[5:7] = (SDRAM type = DDR SDRAM) - * 010 DDR 1 SDRAM - * 011 DDR 2 SDRAM - */ - sdram_type = (spd.mem_type == SPD_MEMTYPE_DDR) ? 2 : 3; - sdram_cfg = (0 - | (1 << 31) /* Enable */ - | (1 << 30) /* Self refresh */ - | (sdram_type << 24) /* SDRAM type */ - ); - - /* - * sdram_cfg[3] = RD_EN - registered DIMM enable - * A value of 0x26 indicates micron registered DIMMS (micron.com) - */ - if (spd.mem_type == SPD_MEMTYPE_DDR && spd.mod_attr == 0x26) { - sdram_cfg |= 0x10000000; /* RD_EN */ - } - -#if defined(CONFIG_DDR_ECC) - /* - * If the user wanted ECC (enabled via sdram_cfg[2]) - */ - if (spd.config == 0x02) { - sdram_cfg |= 0x20000000; /* ECC_EN */ - } -#endif - - /* - * REV1 uses 1T timing. - * REV2 may use 1T or 2T as configured by the user. - */ - { - uint pvr = get_pvr(); - - if (pvr != PVR_85xx_REV1) { -#if defined(CONFIG_DDR_2T_TIMING) - /* - * Enable 2T timing by setting sdram_cfg[16]. - */ - sdram_cfg |= 0x8000; /* 2T_EN */ -#endif - } - } - - /* - * 200 painful micro-seconds must elapse between - * the DDR clock setup and the DDR config enable. - */ - udelay(200); - - /* - * Go! - */ - ddr->sdram_cfg = sdram_cfg; - - asm("sync;isync;msync"); - udelay(500); - - debug("DDR: sdram_cfg = 0x%08x\n", ddr->sdram_cfg); - - -#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Poll until memory is initialized. - * 512 Meg at 400 might hit this 200 times or so. - */ - while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) { - udelay(1000); - } -#endif - - - /* - * Figure out memory size in Megabytes. - */ - memsize = n_ranks * rank_density / 0x100000; - - /* - * Establish Local Access Window and TLB mappings for DDR memory. - */ - memsize = setup_laws_and_tlbs(memsize); - if (memsize == 0) { - return 0; - } - - return memsize * 1024 * 1024; -} - - -/* - * Setup Local Access Window and TLB1 mappings for the requested - * amount of memory. Returns the amount of memory actually mapped - * (usually the original request size), or 0 on error. - */ - -static unsigned int -setup_laws_and_tlbs(unsigned int memsize) -{ - unsigned int tlb_size; - unsigned int law_size; - unsigned int ram_tlb_index; - unsigned int ram_tlb_address; - - /* - * Determine size of each TLB1 entry. - */ - switch (memsize) { - case 16: - case 32: - tlb_size = BOOKE_PAGESZ_16M; - break; - case 64: - case 128: - tlb_size = BOOKE_PAGESZ_64M; - break; - case 256: - case 512: - tlb_size = BOOKE_PAGESZ_256M; - break; - case 1024: - case 2048: - if (PVR_VER(get_pvr()) > PVR_VER(PVR_85xx)) - tlb_size = BOOKE_PAGESZ_1G; - else - tlb_size = BOOKE_PAGESZ_256M; - break; - default: - puts("DDR: only 16M,32M,64M,128M,256M,512M,1G and 2G are supported.\n"); - - /* - * The memory was not able to be mapped. - * Default to a small size. - */ - tlb_size = BOOKE_PAGESZ_64M; - memsize=64; - break; - } - - /* - * Configure DDR TLB1 entries. - * Starting at TLB1 8, use no more than 8 TLB1 entries. - */ - ram_tlb_index = 8; - ram_tlb_address = (unsigned int)CFG_DDR_SDRAM_BASE; - while (ram_tlb_address < (memsize * 1024 * 1024) - && ram_tlb_index < 16) { - set_tlb(1, ram_tlb_address, ram_tlb_address, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, ram_tlb_index, tlb_size, 1); - - ram_tlb_address += (0x1000 << ((tlb_size - 1) * 2)); - ram_tlb_index++; - } - - - /* - * First supported LAW size is 16M, at LAWAR_SIZE_16M == 23. Fnord. - */ - law_size = 19 + __ilog2(memsize); - - /* - * Set up LAWBAR for all of DDR. - */ - -#ifdef CONFIG_FSL_LAW - set_next_law(CFG_DDR_SDRAM_BASE, law_size, LAW_TRGT_IF_DDR); -#endif - - /* - * Confirm that the requested amount of memory was mapped. - */ - return memsize; -} - -#endif /* CONFIG_SPD_EEPROM */ - - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - -/* - * Initialize all of memory for ECC, then enable errors. - */ - -void -ddr_enable_ecc(unsigned int dram_size) -{ - uint *p = 0; - uint i = 0; - volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR); - - dma_init(); - - for (*p = 0; p < (uint *)(8 * 1024); p++) { - if (((unsigned int)p & 0x1f) == 0) { - ppcDcbz((unsigned long) p); - } - *p = (unsigned int)CONFIG_MEM_INIT_VALUE; - if (((unsigned int)p & 0x1c) == 0x1c) { - ppcDcbf((unsigned long) p); - } - } - - dma_xfer((uint *)0x002000, 0x002000, (uint *)0); /* 8K */ - dma_xfer((uint *)0x004000, 0x004000, (uint *)0); /* 16K */ - dma_xfer((uint *)0x008000, 0x008000, (uint *)0); /* 32K */ - dma_xfer((uint *)0x010000, 0x010000, (uint *)0); /* 64K */ - dma_xfer((uint *)0x020000, 0x020000, (uint *)0); /* 128k */ - dma_xfer((uint *)0x040000, 0x040000, (uint *)0); /* 256k */ - dma_xfer((uint *)0x080000, 0x080000, (uint *)0); /* 512k */ - dma_xfer((uint *)0x100000, 0x100000, (uint *)0); /* 1M */ - dma_xfer((uint *)0x200000, 0x200000, (uint *)0); /* 2M */ - dma_xfer((uint *)0x400000, 0x400000, (uint *)0); /* 4M */ - - for (i = 1; i < dram_size / 0x800000; i++) { - dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0); - } - - /* - * Enable errors for ECC. - */ - debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable); - ddr->err_disable = 0x00000000; - asm("sync;isync;msync"); - debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable); -} - -#endif /* CONFIG_DDR_ECC && ! CONFIG_ECC_INIT_VIA_DDRCONTROLLER */ diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index d84554e..5e1cf95 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -137,6 +137,10 @@ #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 2 + #if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560) /* TQM8540 & 8560 need DLL-override */ #define CONFIG_DDR_DLL /* DLL fix needed */ |