diff options
-rw-r--r-- | board/mpc8560ads/u-boot.lds | 1 | ||||
-rw-r--r-- | board/sbc8560/u-boot.lds | 1 | ||||
-rw-r--r-- | board/stxgp3/u-boot.lds | 1 | ||||
-rw-r--r-- | cpu/mpc85xx/Makefile | 2 | ||||
-rw-r--r-- | cpu/mpc85xx/i2c.c | 265 | ||||
-rw-r--r-- | drivers/fsl_i2c.c | 10 | ||||
-rw-r--r-- | include/configs/MPC8540ADS.h | 8 | ||||
-rw-r--r-- | include/configs/MPC8540EVAL.h | 8 | ||||
-rw-r--r-- | include/configs/MPC8541CDS.h | 8 | ||||
-rw-r--r-- | include/configs/MPC8548CDS.h | 8 | ||||
-rw-r--r-- | include/configs/MPC8555CDS.h | 8 | ||||
-rw-r--r-- | include/configs/MPC8560ADS.h | 8 | ||||
-rw-r--r-- | include/configs/MPC8641HPCN.h | 5 | ||||
-rw-r--r-- | include/configs/PM854.h | 8 | ||||
-rw-r--r-- | include/configs/PM856.h | 8 | ||||
-rw-r--r-- | include/configs/SBC8540.h | 8 | ||||
-rw-r--r-- | include/configs/TQM85xx.h | 7 | ||||
-rw-r--r-- | include/configs/sbc8560.h | 8 | ||||
-rw-r--r-- | include/configs/stxgp3.h | 8 |
19 files changed, 83 insertions, 297 deletions
diff --git a/board/mpc8560ads/u-boot.lds b/board/mpc8560ads/u-boot.lds index 8dcee1f..726a153 100644 --- a/board/mpc8560ads/u-boot.lds +++ b/board/mpc8560ads/u-boot.lds @@ -74,7 +74,6 @@ SECTIONS cpu/mpc85xx/cpu_init.o (.text) cpu/mpc85xx/cpu.o (.text) cpu/mpc85xx/speed.o (.text) - cpu/mpc85xx/i2c.o (.text) cpu/mpc85xx/spd_sdram.o (.text) common/dlmalloc.o (.text) lib_generic/crc32.o (.text) diff --git a/board/sbc8560/u-boot.lds b/board/sbc8560/u-boot.lds index 48e19fe..048ac26 100644 --- a/board/sbc8560/u-boot.lds +++ b/board/sbc8560/u-boot.lds @@ -77,7 +77,6 @@ SECTIONS cpu/mpc85xx/cpu_init.o (.text) cpu/mpc85xx/cpu.o (.text) cpu/mpc85xx/speed.o (.text) - cpu/mpc85xx/i2c.o (.text) cpu/mpc85xx/spd_sdram.o (.text) common/dlmalloc.o (.text) lib_generic/crc32.o (.text) diff --git a/board/stxgp3/u-boot.lds b/board/stxgp3/u-boot.lds index 3bc6150..1bbf20a 100644 --- a/board/stxgp3/u-boot.lds +++ b/board/stxgp3/u-boot.lds @@ -79,7 +79,6 @@ SECTIONS cpu/mpc85xx/cpu_init.o (.text) cpu/mpc85xx/cpu.o (.text) cpu/mpc85xx/speed.o (.text) - cpu/mpc85xx/i2c.o (.text) cpu/mpc85xx/spd_sdram.o (.text) common/dlmalloc.o (.text) lib_generic/crc32.o (.text) diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile index 7b32305..ff67dcd 100644 --- a/cpu/mpc85xx/Makefile +++ b/cpu/mpc85xx/Makefile @@ -30,7 +30,7 @@ LIB = $(obj)lib$(CPU).a START = start.o resetvec.o COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \ - pci.o serial_scc.o commproc.o ether_fcc.o i2c.o spd_sdram.o + pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mpc85xx/i2c.c b/cpu/mpc85xx/i2c.c deleted file mode 100644 index 32dcf5d..0000000 --- a/cpu/mpc85xx/i2c.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * (C) Copyright 2003,Motorola Inc. - * Xianghua Xiao <x.xiao@motorola.com> - * Adapted for Motorola 85xx chip. - * - * (C) Copyright 2003 - * Gleb Natapov <gnatapov@mrv.com> - * Some bits are taken from linux driver writen by adrian@humboldt.co.uk - * - * Hardware I2C driver for MPC107 PCI bridge. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <command.h> -#include <asm/io.h> - -#ifdef CONFIG_HARD_I2C -#include <i2c.h> - -#define TIMEOUT (CFG_HZ/4) - -#define I2C_Addr ((u8 *)(CFG_CCSRBAR + 0x3000)) - -#define I2CADR &I2C_Addr[0] -#define I2CFDR &I2C_Addr[4] -#define I2CCCR &I2C_Addr[8] -#define I2CCSR &I2C_Addr[12] -#define I2CCDR &I2C_Addr[16] -#define I2CDFSRR &I2C_Addr[20] - -#define I2C_READ 1 -#define I2C_WRITE 0 - -void -i2c_init(int speed, int slaveadd) -{ - /* stop I2C controller */ - writeb(0x0, I2CCCR); - - /* set clock */ - writeb(0x3f, I2CFDR); - - /* set default filter */ - writeb(0x10,I2CDFSRR); - - /* write slave address */ - writeb(slaveadd, I2CADR); - - /* clear status register */ - writeb(0x0, I2CCSR); - - /* start I2C controller */ - writeb(MPC85xx_I2CCR_MEN, I2CCCR); -} - -static __inline__ int -i2c_wait4bus (void) -{ - ulong timeval = get_timer (0); - - while (readb(I2CCSR) & MPC85xx_I2CSR_MBB) { - if (get_timer (timeval) > TIMEOUT) { - return -1; - } - } - - return 0; -} - -static __inline__ int -i2c_wait (int write) -{ - u32 csr; - ulong timeval = get_timer (0); - - do { - csr = readb(I2CCSR); - - if (!(csr & MPC85xx_I2CSR_MIF)) - continue; - - writeb(0x0, I2CCSR); - - if (csr & MPC85xx_I2CSR_MAL) { - debug("i2c_wait: MAL\n"); - return -1; - } - - if (!(csr & MPC85xx_I2CSR_MCF)) { - debug("i2c_wait: unfinished\n"); - return -1; - } - - if (write == I2C_WRITE && (csr & MPC85xx_I2CSR_RXAK)) { - debug("i2c_wait: No RXACK\n"); - return -1; - } - - return 0; - } while (get_timer (timeval) < TIMEOUT); - - debug("i2c_wait: timed out\n"); - return -1; -} - -static __inline__ int -i2c_write_addr (u8 dev, u8 dir, int rsta) -{ - writeb(MPC85xx_I2CCR_MEN | MPC85xx_I2CCR_MSTA | MPC85xx_I2CCR_MTX | - (rsta?MPC85xx_I2CCR_RSTA:0), - I2CCCR); - - writeb((dev << 1) | dir, I2CCDR); - - if (i2c_wait (I2C_WRITE) < 0) - return 0; - - return 1; -} - -static __inline__ int -__i2c_write (u8 *data, int length) -{ - int i; - - writeb(MPC85xx_I2CCR_MEN | MPC85xx_I2CCR_MSTA | MPC85xx_I2CCR_MTX, - I2CCCR); - - for (i=0; i < length; i++) { - writeb(data[i], I2CCDR); - - if (i2c_wait (I2C_WRITE) < 0) - break; - } - - return i; -} - -static __inline__ int -__i2c_read (u8 *data, int length) -{ - int i; - - writeb(MPC85xx_I2CCR_MEN | MPC85xx_I2CCR_MSTA | - ((length == 1) ? MPC85xx_I2CCR_TXAK : 0), - I2CCCR); - - /* dummy read */ - readb(I2CCDR); - - for (i=0; i < length; i++) { - if (i2c_wait (I2C_READ) < 0) - break; - - /* Generate ack on last next to last byte */ - if (i == length - 2) - writeb(MPC85xx_I2CCR_MEN | MPC85xx_I2CCR_MSTA | - MPC85xx_I2CCR_TXAK, - I2CCCR); - - /* Generate stop on last byte */ - if (i == length - 1) - writeb(MPC85xx_I2CCR_MEN | MPC85xx_I2CCR_TXAK, I2CCCR); - - data[i] = readb(I2CCDR); - } - - return i; -} - -int -i2c_read (u8 dev, uint addr, int alen, u8 *data, int length) -{ - int i = 0; - u8 *a = (u8*)&addr; - - if (i2c_wait4bus () < 0) - goto exit; - - if (i2c_write_addr (dev, I2C_WRITE, 0) == 0) - goto exit; - - if (__i2c_write (&a[4 - alen], alen) != alen) - goto exit; - - if (i2c_write_addr (dev, I2C_READ, 1) == 0) - goto exit; - - i = __i2c_read (data, length); - - exit: - writeb(MPC85xx_I2CCR_MEN, I2CCCR); - - return !(i == length); -} - -int -i2c_write (u8 dev, uint addr, int alen, u8 *data, int length) -{ - int i = 0; - u8 *a = (u8*)&addr; - - if (i2c_wait4bus () < 0) - goto exit; - - if (i2c_write_addr (dev, I2C_WRITE, 0) == 0) - goto exit; - - if (__i2c_write (&a[4 - alen], alen) != alen) - goto exit; - - i = __i2c_write (data, length); - - exit: - writeb(MPC85xx_I2CCR_MEN, I2CCCR); - - return !(i == length); -} - -int i2c_probe (uchar chip) -{ - int tmp; - - /* - * Try to read the first location of the chip. The underlying - * driver doesn't appear to support sending just the chip address - * and looking for an <ACK> back. - */ - udelay(10000); - return i2c_read (chip, 0, 1, (uchar *)&tmp, 1); -} - -uchar i2c_reg_read (uchar i2c_addr, uchar reg) -{ - uchar buf[1]; - - i2c_read (i2c_addr, reg, 1, buf, 1); - - return (buf[0]); -} - -void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val) -{ - i2c_write (i2c_addr, reg, 1, &val, 1); -} - -#endif /* CONFIG_HARD_I2C */ diff --git a/drivers/fsl_i2c.c b/drivers/fsl_i2c.c index af19191..65c2743 100644 --- a/drivers/fsl_i2c.c +++ b/drivers/fsl_i2c.c @@ -18,11 +18,14 @@ #include <common.h> +#ifdef CONFIG_FSL_I2C #ifdef CONFIG_HARD_I2C #include <command.h> +#include <i2c.h> /* Functional interface */ + #include <asm/io.h> -#include <asm/fsl_i2c.h> +#include <asm/fsl_i2c.h> /* HW definitions */ #define I2C_TIMEOUT (CFG_HZ / 4) #define I2C ((struct fsl_i2c *)(CFG_IMMR + CFG_I2C_OFFSET)) @@ -32,7 +35,7 @@ void i2c_init(int speed, int slaveadd) { /* stop I2C controller */ - writeb(0x0 , &I2C->cr); + writeb(0x0, &I2C->cr); /* set clock */ writeb(0x3f, &I2C->fdr); @@ -53,7 +56,7 @@ i2c_init(int speed, int slaveadd) static __inline__ int i2c_wait4bus(void) { - ulong timeval = get_timer (0); + ulong timeval = get_timer(0); while (readb(&I2C->sr) & I2C_SR_MBB) { if (get_timer(timeval) > I2C_TIMEOUT) { @@ -235,3 +238,4 @@ i2c_reg_write(uchar i2c_addr, uchar reg, uchar val) } #endif /* CONFIG_HARD_I2C */ +#endif /* CONFIG_FSL_I2C */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 31ffbaf..74a84f4 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -312,12 +312,16 @@ #define CFG_64BIT_VSPRINTF 1 #define CFG_64BIT_STRTOUL 1 -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* RapidIO MMU */ #define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 1af9231..418a3a3 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -179,12 +179,16 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* General PCI */ #define CFG_PCI_MEM_BASE 0x80000000 diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 2b87f1b..db389cf 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -320,13 +320,17 @@ extern unsigned long get_clock_freq(void); #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8541@e0000000/serial@4600" -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_EEPROM_ADDR 0x57 #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* * General PCI diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 03ab976..be8f93f 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -326,13 +326,17 @@ extern unsigned long get_clock_freq(void); #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8548@e0000000/serial@4600" -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_EEPROM_ADDR 0x57 #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* * General PCI diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 771a9d3..4c8b4e7 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -320,13 +320,17 @@ extern unsigned long get_clock_freq(void); #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8555@e0000000/serial@4600" -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_EEPROM_ADDR 0x57 #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* * General PCI diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 1c684f2..835bf5c 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -302,12 +302,16 @@ #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8560@e0000000/serial@4500" -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* RapidIO MMU */ #define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 81bb7cf..246ac7f 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -275,12 +275,13 @@ /* * I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_OFFSET 0x3100 #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3100 /* * RapidIO MMU diff --git a/include/configs/PM854.h b/include/configs/PM854.h index da01186..4fb5440 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -193,12 +193,16 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* * EEPROM configuration diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 4d83487..87ab934 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -190,12 +190,16 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* * EEPROM configuration diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index 0451b20..f8e3397 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -214,12 +214,16 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 #define CFG_PCI_MEM_BASE 0xC0000000 #define CFG_PCI_MEM_PHYS 0xC0000000 diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index bc3b9aa..cce4624 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -192,12 +192,17 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x48} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* I2C RTC */ #define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */ diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 5a434dc..6e4fdb2 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -197,12 +197,16 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 #define CFG_PCI_MEM_BASE 0xC0000000 #define CFG_PCI_MEM_PHYS 0xC0000000 diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index e218597..625cf20 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -172,8 +172,11 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F @@ -183,6 +186,7 @@ /* I did the 'if 0' so we could keep the syntax above if ever needed. */ #undef CFG_I2C_NOPROBES #endif +#define CFG_I2C_OFFSET 0x3000 /* RapdIO Map configuration, mapped 1:1. */ |