summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/freescale/mpc8323erdb/mpc8323erdb.c34
-rw-r--r--board/freescale/mpc8360emds/mpc8360emds.c11
-rw-r--r--board/freescale/mpc837xemds/mpc837xemds.c30
-rw-r--r--board/freescale/mpc837xerdb/mpc837xerdb.c15
-rw-r--r--cpu/mpc83xx/cpu.c166
-rw-r--r--cpu/mpc83xx/spd_sdram.c21
-rw-r--r--cpu/mpc83xx/speed.c16
-rw-r--r--cpu/mpc83xx/start.S11
-rw-r--r--include/asm-ppc/global_data.h3
-rw-r--r--include/configs/MPC8315ERDB.h23
-rw-r--r--include/configs/MPC8323ERDB.h12
-rw-r--r--include/configs/MPC837XEMDS.h28
-rw-r--r--include/configs/MPC837XERDB.h23
-rw-r--r--include/mpc83xx.h95
-rw-r--r--lib_ppc/board.c5
15 files changed, 261 insertions, 232 deletions
diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c
index 88d5e8f..afc0eee 100644
--- a/board/freescale/mpc8323erdb/mpc8323erdb.c
+++ b/board/freescale/mpc8323erdb/mpc8323erdb.c
@@ -185,3 +185,37 @@ void ft_board_setup(void *blob, bd_t *bd)
#endif
}
#endif
+
+#if defined(CFG_I2C_MAC_OFFSET)
+int mac_read_from_eeprom(void)
+{
+ uchar buf[28];
+ char str[18];
+ int i = 0;
+ unsigned int crc = 0;
+ unsigned char enetvar[32];
+
+ /* Read MAC addresses from EEPROM */
+ if (eeprom_read(CFG_I2C_EEPROM_ADDR, CFG_I2C_MAC_OFFSET, buf, 28)) {
+ printf("\nEEPROM @ 0x%02x read FAILED!!!\n",
+ CFG_I2C_EEPROM_ADDR);
+ } else {
+ if (crc32(crc, buf, 24) == *(unsigned int *)&buf[24]) {
+ printf("Reading MAC from EEPROM\n");
+ for (i = 0; i < 4; i++) {
+ if (memcmp(&buf[i * 6], "\0\0\0\0\0\0", 6)) {
+ sprintf(str,
+ "%02X:%02X:%02X:%02X:%02X:%02X",
+ buf[i * 6], buf[i * 6 + 1],
+ buf[i * 6 + 2], buf[i * 6 + 3],
+ buf[i * 6 + 4], buf[i * 6 + 5]);
+ sprintf((char *)enetvar,
+ i ? "eth%daddr" : "ethaddr", i);
+ setenv((char *)enetvar, str);
+ }
+ }
+ }
+ }
+ return 0;
+}
+#endif /* CONFIG_I2C_MAC_OFFSET */
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index d90cdb3..2119320 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -98,11 +98,8 @@ int board_early_init_f(void)
/* Enable flash write */
bcsr[0xa] &= ~0x04;
- /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2 h/w bug workaround) */
- if (immr->sysconf.spridr == SPR_8360_REV20 ||
- immr->sysconf.spridr == SPR_8360E_REV20 ||
- immr->sysconf.spridr == SPR_8360_REV21 ||
- immr->sysconf.spridr == SPR_8360E_REV21)
+ /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2.x h/w bug workaround) */
+ if (REVID_MAJOR(immr->sysconf.spridr) == 2)
bcsr[0xe] = 0x30;
/* Enable second UART */
@@ -308,8 +305,8 @@ void ft_board_setup(void *blob, bd_t *bd)
* if on mpc8360ea rev. 2.1,
* change both ucc phy-connection-types from rgmii-id to rgmii-rxid
*/
- if (immr->sysconf.spridr == SPR_8360_REV21 ||
- immr->sysconf.spridr == SPR_8360E_REV21) {
+ if ((REVID_MAJOR(immr->sysconf.spridr) == 2) &&
+ (REVID_MINOR(immr->sysconf.spridr) == 1)) {
int nodeoffset;
const char *prop;
int path;
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index e57a53f..f7cd5fe 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -12,6 +12,8 @@
#include <common.h>
#include <i2c.h>
+#include <asm/io.h>
+#include <asm/fsl_serdes.h>
#include <spd_sdram.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
@@ -29,6 +31,34 @@ int board_early_init_f(void)
/* Clear all of the interrupt of BCSR */
bcsr[0xe] = 0xff;
+#ifdef CONFIG_FSL_SERDES
+ immap_t *immr = (immap_t *)CFG_IMMR;
+ u32 spridr = in_be32(&immr->sysconf.spridr);
+
+ /* we check only part num, and don't look for CPU revisions */
+ switch (spridr) {
+ case SPR_8377:
+ fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ break;
+ case SPR_8378:
+ fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ break;
+ case SPR_8379:
+ fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ break;
+ default:
+ printf("serdes not configured: unknown CPU part number: "
+ "%04x\n", spridr >> 16);
+ break;
+ }
+#endif /* CONFIG_FSL_SERDES */
return 0;
}
diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c
index 83fb60d..e054f4e 100644
--- a/board/freescale/mpc837xerdb/mpc837xerdb.c
+++ b/board/freescale/mpc837xerdb/mpc837xerdb.c
@@ -140,24 +140,21 @@ int board_early_init_f(void)
u32 spridr = in_be32(&immr->sysconf.spridr);
/* we check only part num, and don't look for CPU revisions */
- switch (spridr >> 16) {
- case SPR_8379E_REV10 >> 16:
- case SPR_8379_REV10 >> 16:
+ switch (PARTID_NO_E(spridr)) {
+ case SPR_8377:
fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
- fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA,
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
break;
- case SPR_8378E_REV10 >> 16:
- case SPR_8378_REV10 >> 16:
+ case SPR_8378:
fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
break;
- case SPR_8377E_REV10 >> 16:
- case SPR_8377_REV10 >> 16:
+ case SPR_8379:
fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
- fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA,
FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
break;
default:
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index bff3cef..36de78d 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -42,6 +42,30 @@ int checkcpu(void)
u32 pvr = get_pvr();
u32 spridr;
char buf[32];
+ int i;
+
+#define CPU_TYPE_ENTRY(x) {#x, SPR_##x}
+ const struct cpu_type {
+ char name[15];
+ u32 partid;
+ } cpu_type_list [] = {
+ CPU_TYPE_ENTRY(8311),
+ CPU_TYPE_ENTRY(8313),
+ CPU_TYPE_ENTRY(8314),
+ CPU_TYPE_ENTRY(8315),
+ CPU_TYPE_ENTRY(8321),
+ CPU_TYPE_ENTRY(8323),
+ CPU_TYPE_ENTRY(8343),
+ CPU_TYPE_ENTRY(8347_TBGA_),
+ CPU_TYPE_ENTRY(8347_PBGA_),
+ CPU_TYPE_ENTRY(8349),
+ CPU_TYPE_ENTRY(8358_TBGA_),
+ CPU_TYPE_ENTRY(8358_PBGA_),
+ CPU_TYPE_ENTRY(8360),
+ CPU_TYPE_ENTRY(8377),
+ CPU_TYPE_ENTRY(8378),
+ CPU_TYPE_ENTRY(8379),
+ };
immr = (immap_t *)CFG_IMMR;
@@ -69,130 +93,26 @@ int checkcpu(void)
}
spridr = immr->sysconf.spridr;
- switch(spridr) {
- case SPR_8349E_REV10:
- case SPR_8349E_REV11:
- case SPR_8349E_REV31:
- puts("MPC8349E, ");
- break;
- case SPR_8349_REV10:
- case SPR_8349_REV11:
- case SPR_8349_REV31:
- puts("MPC8349, ");
- break;
- case SPR_8347E_REV10_TBGA:
- case SPR_8347E_REV11_TBGA:
- case SPR_8347E_REV31_TBGA:
- case SPR_8347E_REV10_PBGA:
- case SPR_8347E_REV11_PBGA:
- case SPR_8347E_REV31_PBGA:
- puts("MPC8347E, ");
- break;
- case SPR_8347_REV10_TBGA:
- case SPR_8347_REV11_TBGA:
- case SPR_8347_REV31_TBGA:
- case SPR_8347_REV10_PBGA:
- case SPR_8347_REV11_PBGA:
- case SPR_8347_REV31_PBGA:
- puts("MPC8347, ");
- break;
- case SPR_8343E_REV10:
- case SPR_8343E_REV11:
- case SPR_8343E_REV31:
- puts("MPC8343E, ");
- break;
- case SPR_8343_REV10:
- case SPR_8343_REV11:
- case SPR_8343_REV31:
- puts("MPC8343, ");
- break;
- case SPR_8360E_REV10:
- case SPR_8360E_REV11:
- case SPR_8360E_REV12:
- case SPR_8360E_REV20:
- case SPR_8360E_REV21:
- puts("MPC8360E, ");
- break;
- case SPR_8360_REV10:
- case SPR_8360_REV11:
- case SPR_8360_REV12:
- case SPR_8360_REV20:
- case SPR_8360_REV21:
- puts("MPC8360, ");
- break;
- case SPR_8323E_REV10:
- case SPR_8323E_REV11:
- puts("MPC8323E, ");
- break;
- case SPR_8323_REV10:
- case SPR_8323_REV11:
- puts("MPC8323, ");
- break;
- case SPR_8321E_REV10:
- case SPR_8321E_REV11:
- puts("MPC8321E, ");
- break;
- case SPR_8321_REV10:
- case SPR_8321_REV11:
- puts("MPC8321, ");
- break;
- case SPR_8311_REV10:
- puts("MPC8311, ");
- break;
- case SPR_8311E_REV10:
- puts("MPC8311E, ");
- break;
- case SPR_8313_REV10:
- puts("MPC8313, ");
- break;
- case SPR_8313E_REV10:
- puts("MPC8313E, ");
- break;
- case SPR_8315E_REV10:
- puts("MPC8315E, ");
- break;
- case SPR_8315_REV10:
- puts("MPC8315, ");
- break;
- case SPR_8314E_REV10:
- puts("MPC8314E, ");
- break;
- case SPR_8314_REV10:
- puts("MPC8314, ");
- break;
- case SPR_8379E_REV10:
- puts("MPC8379E, ");
- break;
- case SPR_8379_REV10:
- puts("MPC8379, ");
- break;
- case SPR_8378E_REV10:
- puts("MPC8378E, ");
- break;
- case SPR_8378_REV10:
- puts("MPC8378, ");
- break;
- case SPR_8377E_REV10:
- puts("MPC8377E, ");
- break;
- case SPR_8377_REV10:
- puts("MPC8377, ");
- break;
- default:
- printf("Rev: Unknown revision number:%08x\n"
- "Warning: Unsupported cpu revision!\n",spridr);
- return 0;
- }
-#if defined(CONFIG_MPC834X)
- /* Multiple revisons of 834x processors may have the same SPRIDR value.
- * So use PVR to identify the revision number.
- */
- printf("Rev: %02x at %s MHz", PVR_MAJ(pvr)<<4 | PVR_MIN(pvr), strmhz(buf, clock));
-#else
- printf("Rev: %02x at %s MHz", spridr & 0x0000FFFF, strmhz(buf, clock));
-#endif
- printf(", CSB: %4d MHz\n", gd->csb_clk / 1000000);
+ for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
+ if (cpu_type_list[i].partid == PARTID_NO_E(spridr)) {
+ puts("MPC");
+ puts(cpu_type_list[i].name);
+ if (IS_E_PROCESSOR(spridr))
+ puts("E");
+ if (REVID_MAJOR(spridr) >= 2)
+ puts("A");
+ printf(", Rev: %d.%d", REVID_MAJOR(spridr),
+ REVID_MINOR(spridr));
+ break;
+ }
+
+ if (i == ARRAY_SIZE(cpu_type_list))
+ printf("(SPRIDR %08x unknown), ", spridr);
+
+ printf(" at %s MHz, ", strmhz(buf, clock));
+
+ printf("CSB: %s MHz\n", strmhz(buf, gd->csb_clk));
return 0;
}
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 0acca47..97ac7bb 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -34,10 +34,13 @@
#include <asm/mmu.h>
#include <spd_sdram.h>
+DECLARE_GLOBAL_DATA_PTR;
+
void board_add_ram_info(int use_default)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile ddr83xx_t *ddr = &immap->ddr;
+ char buf[32];
printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK)
>> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1);
@@ -48,9 +51,11 @@ void board_add_ram_info(int use_default)
puts(", 64-bit");
if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN)
- puts(", ECC on)");
+ puts(", ECC on");
else
- puts(", ECC off)");
+ puts(", ECC off");
+
+ printf(", %s MHz)", strmhz(buf, gd->mem_clk));
#if defined(CFG_LB_SDRAM) && defined(CFG_LBC_SDRAM_SIZE)
puts("\nSDRAM: ");
@@ -60,8 +65,6 @@ void board_add_ram_info(int use_default)
#ifdef CONFIG_SPD_EEPROM
-DECLARE_GLOBAL_DATA_PTR;
-
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
extern void dma_init(void);
extern uint dma_check(void);
@@ -78,12 +81,12 @@ extern int dma_xfer(void *dest, uint count, void *src);
int
picos_to_clk(int picos)
{
- unsigned int ddr_bus_clk;
+ unsigned int mem_bus_clk;
int clks;
- ddr_bus_clk = gd->ddr_clk >> 1;
- clks = picos / (1000000000 / (ddr_bus_clk / 1000));
- if (picos % (1000000000 / (ddr_bus_clk / 1000)) != 0)
+ mem_bus_clk = gd->mem_clk >> 1;
+ clks = picos / (1000000000 / (mem_bus_clk / 1000));
+ if (picos % (1000000000 / (mem_bus_clk / 1000)) != 0)
clks++;
return clks;
@@ -313,7 +316,7 @@ long int spd_sdram()
debug("DDR:Module maximum data rate is: %dMhz\n", max_data_rate);
- ddrc_clk = gd->ddr_clk / 1000000;
+ ddrc_clk = gd->mem_clk / 1000000;
effective_data_rate = 0;
if (max_data_rate >= 390 && max_data_rate < 460) { /* it is DDR 400 */
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index f598699..16145dd 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -122,9 +122,9 @@ int get_clocks(void)
u32 enc_clk;
u32 lbiu_clk;
u32 lclk_clk;
- u32 ddr_clk;
+ u32 mem_clk;
#if defined(CONFIG_MPC8360)
- u32 ddr_sec_clk;
+ u32 mem_sec_clk;
#endif
#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
u32 qepmf;
@@ -400,11 +400,11 @@ int get_clocks(void)
return -12;
}
- ddr_clk = csb_clk *
+ mem_clk = csb_clk *
(1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT));
corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT;
#if defined(CONFIG_MPC8360)
- ddr_sec_clk = csb_clk * (1 +
+ mem_sec_clk = csb_clk * (1 +
((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
#endif
@@ -466,9 +466,9 @@ int get_clocks(void)
gd->enc_clk = enc_clk;
gd->lbiu_clk = lbiu_clk;
gd->lclk_clk = lclk_clk;
- gd->ddr_clk = ddr_clk;
+ gd->mem_clk = mem_clk;
#if defined(CONFIG_MPC8360)
- gd->ddr_sec_clk = ddr_sec_clk;
+ gd->mem_sec_clk = mem_sec_clk;
#endif
#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
gd->qe_clk = qe_clk;
@@ -508,9 +508,9 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
#endif
printf(" Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000);
printf(" Local Bus: %4d MHz\n", gd->lclk_clk / 1000000);
- printf(" DDR: %4d MHz\n", gd->ddr_clk / 1000000);
+ printf(" DDR: %4d MHz\n", gd->mem_clk / 1000000);
#if defined(CONFIG_MPC8360)
- printf(" DDR Secondary: %4d MHz\n", gd->ddr_sec_clk / 1000000);
+ printf(" DDR Secondary: %4d MHz\n", gd->mem_sec_clk / 1000000);
#endif
printf(" SEC: %4d MHz\n", gd->enc_clk / 1000000);
printf(" I2C1: %4d MHz\n", gd->i2c1_clk / 1000000);
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
index 309eb30..fdf9d35 100644
--- a/cpu/mpc83xx/start.S
+++ b/cpu/mpc83xx/start.S
@@ -172,8 +172,11 @@ boot_warm: /* time t 5 */
/* there and deflate the flash size back to minimal size */
/*------------------------------------------------------------*/
bl map_flash_by_law1
- lis r4, (CFG_MONITOR_BASE)@h
- ori r4, r4, (CFG_MONITOR_BASE)@l
+
+ GET_GOT /* initialize GOT access */
+ lwz r4, GOT(_start)
+ addi r4, r4, -EXC_OFF_SYS_RESET
+
addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
mtlr r5
blr
@@ -872,8 +875,8 @@ relocate_code:
mr r10, r5 /* Save copy of Destination Address */
mr r3, r5 /* Destination Address */
- lis r4, CFG_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CFG_MONITOR_BASE@l
+ lwz r4, GOT(_start)
+ addi r4, r4, -EXC_OFF_SYS_RESET
lwz r5, GOT(__init_end)
sub r5, r5, r4
li r6, CFG_CACHELINE_SIZE /* Cache Line Size */
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index b43dba3..9ccf7d6 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -74,7 +74,6 @@ typedef struct global_data {
u32 enc_clk;
u32 lbiu_clk;
u32 lclk_clk;
- u32 ddr_clk;
u32 pci_clk;
#if defined(CONFIG_MPC837X)
u32 pciexp1_clk;
@@ -84,7 +83,7 @@ typedef struct global_data {
u32 sata_clk;
#endif
#if defined(CONFIG_MPC8360)
- u32 ddr_sec_clk;
+ u32 mem_sec_clk;
#endif /* CONFIG_MPC8360 */
#endif
#if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index af78726..432fb31 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -349,6 +349,29 @@
#define CONFIG_ETHPRIME "eTSEC1"
/*
+ * SATA
+ */
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+
+#define CFG_SATA_MAX_DEVICE 2
+#define CONFIG_SATA1
+#define CFG_SATA1_OFFSET 0x18000
+#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET)
+#define CFG_SATA1_FLAGS FLAGS_DMA
+#define CONFIG_SATA2
+#define CFG_SATA2_OFFSET 0x19000
+#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET)
+#define CFG_SATA2_FLAGS FLAGS_DMA
+
+#ifdef CONFIG_FSL_SATA
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#endif
+
+/*
* Environment
*/
#ifndef CFG_RAMBOOT
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 94c4c6b..92d7aa4 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -323,8 +323,11 @@
/*
* Config on-board EEPROM
*/
-#define CFG_I2C_EEPROM_ADDR 0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_EEPROM_PAGE_WRITE_BITS 6
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* General PCI
@@ -341,7 +344,7 @@
#define CFG_PCI1_IO_SIZE 0x04000000 /* 64M */
#ifdef CONFIG_PCI
-
+#define CONFIG_PCI_SKIP_HOST_BRIDGE
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
@@ -549,6 +552,9 @@
#define CONFIG_HAS_ETH1 /* add support for "eth1addr" */
#define CONFIG_ETH1ADDR 00:04:9f:ef:03:02
+/* use mac_read_from_eeprom() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */
+#define CFG_I2C_MAC_OFFSET 0x7f00 /* MAC address offset in I2C EEPROM */
+
#define CONFIG_IPADDR 10.0.0.2
#define CONFIG_SERVERIP 10.0.0.1
#define CONFIG_GATEWAYIP 10.0.0.1
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index b307bf7..7c4e76e 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -389,6 +389,34 @@
/* Options are: TSEC[0-1] */
#define CONFIG_ETHPRIME "eTSEC1"
+/* SERDES */
+#define CONFIG_FSL_SERDES
+#define CONFIG_FSL_SERDES1 0xe3000
+#define CONFIG_FSL_SERDES2 0xe3100
+
+/*
+ * SATA
+ */
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+
+#define CFG_SATA_MAX_DEVICE 2
+#define CONFIG_SATA1
+#define CFG_SATA1_OFFSET 0x18000
+#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET)
+#define CFG_SATA1_FLAGS FLAGS_DMA
+#define CONFIG_SATA2
+#define CFG_SATA2_OFFSET 0x19000
+#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET)
+#define CFG_SATA2_FLAGS FLAGS_DMA
+
+#ifdef CONFIG_FSL_SATA
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#endif
+
/*
* Environment
*/
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 90812e9..eaac525 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -416,6 +416,29 @@
#endif
/*
+ * SATA
+ */
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+
+#define CFG_SATA_MAX_DEVICE 2
+#define CONFIG_SATA1
+#define CFG_SATA1_OFFSET 0x18000
+#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET)
+#define CFG_SATA1_FLAGS FLAGS_DMA
+#define CONFIG_SATA2
+#define CFG_SATA2_OFFSET 0x19000
+#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET)
+#define CFG_SATA2_FLAGS FLAGS_DMA
+
+#ifdef CONFIG_FSL_SATA
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#endif
+
+/*
* Environment
*/
#ifndef CFG_RAMBOOT
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 4ee38aa..d2e1e2b 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -48,71 +48,36 @@
/* SPRIDR - System Part and Revision ID Register
*/
-#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification */
-#define SPRIDR_REVID 0x0000FFFF /* Revision Identification */
-
-#define SPR_8349E_REV10 0x80300100
-#define SPR_8349_REV10 0x80310100
-#define SPR_8347E_REV10_TBGA 0x80320100
-#define SPR_8347_REV10_TBGA 0x80330100
-#define SPR_8347E_REV10_PBGA 0x80340100
-#define SPR_8347_REV10_PBGA 0x80350100
-#define SPR_8343E_REV10 0x80360100
-#define SPR_8343_REV10 0x80370100
-
-#define SPR_8349E_REV11 0x80300101
-#define SPR_8349_REV11 0x80310101
-#define SPR_8347E_REV11_TBGA 0x80320101
-#define SPR_8347_REV11_TBGA 0x80330101
-#define SPR_8347E_REV11_PBGA 0x80340101
-#define SPR_8347_REV11_PBGA 0x80350101
-#define SPR_8343E_REV11 0x80360101
-#define SPR_8343_REV11 0x80370101
-
-#define SPR_8349E_REV31 0x80300300
-#define SPR_8349_REV31 0x80310300
-#define SPR_8347E_REV31_TBGA 0x80320300
-#define SPR_8347_REV31_TBGA 0x80330300
-#define SPR_8347E_REV31_PBGA 0x80340300
-#define SPR_8347_REV31_PBGA 0x80350300
-#define SPR_8343E_REV31 0x80360300
-#define SPR_8343_REV31 0x80370300
-
-#define SPR_8360E_REV10 0x80480010
-#define SPR_8360_REV10 0x80490010
-#define SPR_8360E_REV11 0x80480011
-#define SPR_8360_REV11 0x80490011
-#define SPR_8360E_REV12 0x80480012
-#define SPR_8360_REV12 0x80490012
-#define SPR_8360E_REV20 0x80480020
-#define SPR_8360_REV20 0x80490020
-#define SPR_8360E_REV21 0x80480021
-#define SPR_8360_REV21 0x80490021
-
-#define SPR_8323E_REV10 0x80620010
-#define SPR_8323_REV10 0x80630010
-#define SPR_8321E_REV10 0x80660010
-#define SPR_8321_REV10 0x80670010
-#define SPR_8323E_REV11 0x80620011
-#define SPR_8323_REV11 0x80630011
-#define SPR_8321E_REV11 0x80660011
-#define SPR_8321_REV11 0x80670011
-
-#define SPR_8313E_REV10 0x80B00010
-#define SPR_8313_REV10 0x80B10010
-#define SPR_8311E_REV10 0x80B20010
-#define SPR_8311_REV10 0x80B30010
-#define SPR_8315E_REV10 0x80B40010
-#define SPR_8315_REV10 0x80B50010
-#define SPR_8314E_REV10 0x80B60010
-#define SPR_8314_REV10 0x80B70010
-
-#define SPR_8379E_REV10 0x80C20010
-#define SPR_8379_REV10 0x80C30010
-#define SPR_8378E_REV10 0x80C40010
-#define SPR_8378_REV10 0x80C50010
-#define SPR_8377E_REV10 0x80C60010
-#define SPR_8377_REV10 0x80C70010
+#define SPRIDR_PARTID 0xFFFF0000 /* Part Id */
+#define SPRIDR_REVID 0x0000FFFF /* Revision Id */
+
+#if defined(CONFIG_MPC834X)
+#define REVID_MAJOR(spridr) ((spridr & 0x0000FF00) >> 8)
+#define REVID_MINOR(spridr) (spridr & 0x000000FF)
+#else
+#define REVID_MAJOR(spridr) ((spridr & 0x000000F0) >> 4)
+#define REVID_MINOR(spridr) (spridr & 0x0000000F)
+#endif
+
+#define PARTID_NO_E(spridr) ((spridr & 0xFFFE0000) >> 16)
+#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000)) /* has SEC */
+
+#define SPR_8311 0x80B2
+#define SPR_8313 0x80B0
+#define SPR_8314 0x80B6
+#define SPR_8315 0x80B4
+#define SPR_8321 0x8066
+#define SPR_8323 0x8062
+#define SPR_8343 0x8036
+#define SPR_8347_TBGA_ 0x8032
+#define SPR_8347_PBGA_ 0x8034
+#define SPR_8349 0x8030
+#define SPR_8358_TBGA_ 0x804A
+#define SPR_8358_PBGA_ 0x804E
+#define SPR_8360 0x8048
+#define SPR_8377 0x80C6
+#define SPR_8378 0x80C4
+#define SPR_8379 0x80C2
/* SPCR - System Priority Configuration Register
*/
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index f273976..7d33914 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -124,6 +124,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define CFG_MEM_TOP_HIDE 0
#endif
+extern ulong _start;
extern ulong __init_end;
extern ulong _end;
ulong monitor_flash_len;
@@ -439,7 +440,7 @@ void board_init_f (ulong bootflag)
* - monitor code
* - board info struct
*/
- len = (ulong)&_end - CFG_MONITOR_BASE;
+ len = (ulong)&_end - (ulong)&_start + EXC_OFF_SYS_RESET;
/*
* Subtract specified amount of memory to hide so that it won't
@@ -893,7 +894,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
sc3_read_eeprom();
#endif
-#ifdef CFG_ID_EEPROM
+#if defined (CFG_ID_EEPROM) || defined (CFG_I2C_MAC_OFFSET)
mac_read_from_eeprom();
#endif