diff options
| -rw-r--r-- | CHANGELOG | 8 | ||||
| -rwxr-xr-x | MAKEALL | 2 | ||||
| -rw-r--r-- | Makefile | 33 | ||||
| -rw-r--r-- | board/tqm5200/tqm5200.c | 20 | ||||
| -rw-r--r-- | include/configs/TQM5200.h | 31 | ||||
| -rw-r--r-- | include/configs/spieval.h | 28 |
6 files changed, 27 insertions, 95 deletions
@@ -2,6 +2,14 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Adjust TQM5200 make targets + Make the automatic CS configuration the default. + The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB + and CONFIG_TQM5200_AC are removed. + "TQM5200_config" is now the default for STK52XX.200 base boards. + On a STK52XX.100 base board "TQM5200_STK100_config" must be used. + Patch by Martin Krause, 07 Nov 2005 + * Fix setting of environment variable "ver" on trab board The environment variable "ver" is now set before do_auto_update() is called, so that "ver" can be used @@ -28,7 +28,7 @@ LIST_5xxx=" \ BC3450 cpci5200 EVAL5200 icecube_5100 \ icecube_5200 lite5200b mcc200 o2dnt \ pf5200 PM520 Total5100 Total5200 \ - Total5200_Rev2 TQM5200_auto \ + Total5200_Rev2 TQM5200 \ " ######################################################################### @@ -356,8 +356,8 @@ smmaco4_config: unconfig @./mkconfig -a smmaco4 ppc mpc5xxx tqm5200 spieval_config: unconfig - echo "#define CONFIG_CS_AUTOCONF">>include/config.h - echo "... with automatic CS configuration" + @echo "#define CONFIG_CS_AUTOCONF">>include/config.h + @echo "... with automatic CS configuration" @./mkconfig -a spieval ppc mpc5xxx tqm5200 MINI5200_config \ @@ -394,35 +394,20 @@ Total5200_Rev2_lowboot_config: unconfig } @./mkconfig -a Total5200 ppc mpc5xxx total5200 -TQM5200_auto_config \ -TQM5200_AA_config \ -TQM5200_AB_config \ -TQM5200_AC_config \ +TQM5200_config \ +TQM5200_STK100_config \ MiniFAP_config: unconfig @ >include/config.h @[ -z "$(findstring MiniFAP,$@)" ] || \ { echo "#define CONFIG_MINIFAP" >>include/config.h ; \ - echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \ echo "... TQM5200_AC on MiniFAP" ; \ } - @[ -z "$(findstring AA,$@)" ] || \ - { echo "#define CONFIG_TQM5200_AA" >>include/config.h ; \ - echo "... with 4 MB Flash, 16 MB SDRAM, 32 kB EEPROM" ; \ - } - @[ -z "$(findstring AB,$@)" ] || \ - { echo "#define CONFIG_TQM5200_AB" >>include/config.h ; \ - echo "... with 64 MB Flash, 64 MB SDRAM, 32 kB EEPROM, 512 kB SRAM" ; \ - echo "... with Graphics Controller"; \ - } - @[ -z "$(findstring AC,$@)" ] || \ - { echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \ - echo "... with 4 MB Flash, 128 MB SDRAM" ; \ - echo "... with Graphics Controller"; \ - } - @[ -z "$(findstring auto,$@)" ] || \ - { echo "#define CONFIG_CS_AUTOCONF" >>include/config.h ; \ - echo "... with automatic CS configuration" ; \ + @[ -z "$(findstring STK100,$@)" ] || \ + { echo "#define CONFIG_STK52XX_REV100" >>include/config.h ; \ + echo "... on a STK52XX.100 base board" ; \ } + @echo "#define CONFIG_CS_AUTOCONF">>include/config.h ; + @echo "... with automatic CS configuration" ; @./mkconfig -a TQM5200 ppc mpc5xxx tqm5200 ######################################################################### diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index 6aad920..310abd2 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -254,13 +254,7 @@ int checkboard (void) puts ("Board: AEVFIFO\n"); return 0; #endif -#if defined (CONFIG_TQM5200_AA) - puts ("Board: TQM5200-AA (TQ-Components GmbH)\n"); -#elif defined (CONFIG_TQM5200_AB) - puts ("Board: TQM5200-AB (TQ-Components GmbH)\n"); -#elif defined (CONFIG_TQM5200_AC) - puts ("Board: TQM5200-AC (TQ-Components GmbH)\n"); -#elif defined (CONFIG_TQM5200) +#if defined (CONFIG_TQM5200) puts ("Board: TQM5200 (TQ-Components GmbH)\n"); #endif #if defined (CONFIG_STK52XX) @@ -572,17 +566,7 @@ static const SMI_REGS init_regs [] = void video_get_info_str (int line_number, char *info) { if (line_number == 1) { -#if defined (CONFIG_TQM5200_AA) - strcpy (info, " Board: TQM5200-AA (TQ-Components GmbH)"); -#elif defined (CONFIG_TQM5200_AB) - strcpy (info, " Board: TQM5200-AB (TQ-Components GmbH)"); -#elif defined (CONFIG_TQM5200_AC) - strcpy (info, " Board: TQM5200-AC (TQ-Components GmbH)"); -#elif defined (CONFIG_TQM5200) - strcpy (info, " Board: TQM5200 (TQ-Components GmbH)"); -#else -#error No supported board selected -#endif + strcpy (info, " Board: TQM5200 (TQ-Components GmbH)"); #if defined (CONFIG_STK52XX) } else if (line_number == 2) { strcpy (info, " on a STK52XX baseboard"); diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 6020998..6b8759f 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -37,7 +37,6 @@ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ #define CONFIG_STK52XX 1 /* ... on a STK52XX base board */ -#define CONFIG_STK52XX_REV100 1 /* define for revision 100 baseboards */ #define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ @@ -83,7 +82,7 @@ #define CONFIG_PCI_IO_SIZE 0x01000000 #define CONFIG_NET_MULTI 1 -#define CONFIG_EEPRO100 +#define CONFIG_EEPRO100 1 #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 #endif /* CONFIG_STK52XX */ @@ -192,16 +191,6 @@ #undef CONFIG_BOOTARGS -#if defined (CONFIG_TQM5200_AA) -# define CONFIG_U_BOOT_SUFFIX "-AA\0" -#elif defined (CONFIG_TQM5200_AB) -# define CONFIG_U_BOOT_SUFFIX "-AB\0" -#elif defined (CONFIG_TQM5200_AC) -# define CONFIG_U_BOOT_SUFFIX "-AC\0" -#else -# define CONFIG_U_BOOT_SUFFIX "\0" -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ @@ -218,7 +207,7 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "bootfile=/tftpboot/tqm5200/uImage\0" \ "load=tftp 200000 ${u-boot}\0" \ - "u-boot=/tftpboot/tqm5200/u-boot.bin" CONFIG_U_BOOT_SUFFIX \ + "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ "update=protect off FC000000 FC05FFFF;" \ "erase FC000000 FC05FFFF;" \ "cp.b 200000 FC000000 ${filesize};" \ @@ -284,13 +273,6 @@ #endif /* List of I2C addresses to be verified by POST */ -#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB) -#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ - CFG_I2C_SLAVE } -#elif defined (CONFIG_TQM5200_AC) -#define I2C_ADDR_LIST { CFG_I2C_SLAVE } -#endif - #if defined (CONFIG_MINIFAP) #undef I2C_ADDR_LIST #define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ @@ -493,13 +475,9 @@ * SRAM - Do not map below 2 GB in address space, because this area is used * for SDRAM autosizing. */ -#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF) +#if defined (CONFIG_CS_AUTOCONF) #define CFG_CS2_START 0xE5000000 -#ifdef CONFIG_TQM5200_AB -#define CFG_CS2_SIZE 0x80000 /* 512 kByte */ -#else /* CONFIG_CS_AUTOCONF */ #define CFG_CS2_SIZE 0x100000 /* 1 MByte */ -#endif #define CFG_CS2_CFG 0x0004D930 #endif @@ -507,8 +485,7 @@ * Grafic controller - Do not map below 2 GB in address space, because this * area is used for SDRAM autosizing. */ -#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \ - defined (CONFIG_CS_AUTOCONF) +#if defined (CONFIG_CS_AUTOCONF) #define SM501_FB_BASE 0xE0000000 #define CFG_CS1_START (SM501_FB_BASE) #define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ diff --git a/include/configs/spieval.h b/include/configs/spieval.h index 96cb6e4..9ebb51e 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -191,16 +191,6 @@ #undef CONFIG_BOOTARGS -#if defined (CONFIG_TQM5200_AA) -# define CONFIG_U_BOOT_SUFFIX "-AA\0" -#elif defined (CONFIG_TQM5200_AB) -# define CONFIG_U_BOOT_SUFFIX "-AB\0" -#elif defined (CONFIG_TQM5200_AC) -# define CONFIG_U_BOOT_SUFFIX "-AC\0" -#else -# define CONFIG_U_BOOT_SUFFIX "\0" -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ @@ -217,7 +207,7 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "bootfile=/tftpboot/tqm5200/uImage\0" \ "load=tftp 200000 ${u-boot}\0" \ - "u-boot=/tftpboot/tqm5200/u-boot.bin" CONFIG_U_BOOT_SUFFIX \ + "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ "update=protect off FC000000 FC05FFFF;" \ "erase FC000000 FC05FFFF;" \ "cp.b 200000 FC000000 ${filesize};" \ @@ -283,13 +273,6 @@ #endif /* List of I2C addresses to be verified by POST */ -#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB) -#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ - CFG_I2C_SLAVE } -#elif defined (CONFIG_TQM5200_AC) -#define I2C_ADDR_LIST { CFG_I2C_SLAVE } -#endif - #if defined (CONFIG_MINIFAP) #undef I2C_ADDR_LIST #define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ @@ -478,13 +461,9 @@ * SRAM - Do not map below 2 GB in address space, because this area is used * for SDRAM autosizing. */ -#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF) +#if defined (CONFIG_CS_AUTOCONF) #define CFG_CS2_START 0xE5000000 -#ifdef CONFIG_TQM5200_AB -#define CFG_CS2_SIZE 0x80000 /* 512 kByte */ -#else /* CONFIG_CS_AUTOCONF */ #define CFG_CS2_SIZE 0x100000 /* 1 MByte */ -#endif #define CFG_CS2_CFG 0x0004D930 #endif @@ -492,8 +471,7 @@ * Grafic controller - Do not map below 2 GB in address space, because this * area is used for SDRAM autosizing. */ -#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \ - defined (CONFIG_CS_AUTOCONF) +#if defined (CONFIG_CS_AUTOCONF) #define SM501_FB_BASE 0xE0000000 #define CFG_CS1_START (SM501_FB_BASE) #define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ |