diff options
| -rw-r--r-- | post/cpu/ppc4xx/ether.c | 42 |
1 files changed, 21 insertions, 21 deletions
diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c index 09f9a5f..4ac7491 100644 --- a/post/cpu/ppc4xx/ether.c +++ b/post/cpu/ppc4xx/ether.c @@ -117,11 +117,11 @@ static void ether_post_init (int devnum, int hw_addr) sync (); #endif /* reset emac */ - out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST); + out_be32 ((void*)(EMAC_M0 + hw_addr), EMAC_M0_SRST); sync (); for (i = 0;; i++) { - if (!(in32 (EMAC_M0 + hw_addr) & EMAC_M0_SRST)) + if (!(in_be32 ((void*)(EMAC_M0 + hw_addr)) & EMAC_M0_SRST)) break; if (i >= 1000) { printf ("Timeout resetting EMAC\n"); @@ -144,7 +144,7 @@ static void ether_post_init (int devnum, int hw_addr) else mode_reg |= EMAC_M1_OBCI_GT100; - out32 (EMAC_M1 + hw_addr, mode_reg); + out_be32 ((void*)(EMAC_M1 + hw_addr), mode_reg); #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ @@ -212,40 +212,40 @@ static void ether_post_init (int devnum, int hw_addr) /* set internal loopback mode */ #ifdef CFG_POST_ETHER_EXT_LOOPBACK - out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | 0 | - EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K | - EMAC_M1_MF_100MBPS | EMAC_M1_IST | - in32 (EMAC_M1)); + out_be32 ((void*)(EMAC_M1 + hw_addr), EMAC_M1_FDE | 0 | + EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K | + EMAC_M1_MF_100MBPS | EMAC_M1_IST | + in_be32 ((void*)(EMAC_M1 + hw_addr))); #else - out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | EMAC_M1_ILE | - EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K | - EMAC_M1_MF_100MBPS | EMAC_M1_IST | - in32 (EMAC_M1)); + out_be32 ((void*)(EMAC_M1 + hw_addr), EMAC_M1_FDE | EMAC_M1_ILE | + EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K | + EMAC_M1_MF_100MBPS | EMAC_M1_IST | + in_be32 ((void*)(EMAC_M1 + hw_addr))); #endif /* set transmit enable & receive enable */ - out32 (EMAC_M0 + hw_addr, EMAC_M0_TXE | EMAC_M0_RXE); + out_be32 ((void*)(EMAC_M0 + hw_addr), EMAC_M0_TXE | EMAC_M0_RXE); /* enable broadcast address */ - out32 (EMAC_RXM + hw_addr, EMAC_RMR_BAE); + out_be32 ((void*)(EMAC_RXM + hw_addr), EMAC_RMR_BAE); /* set transmit request threshold register */ - out32 (EMAC_TRTR + hw_addr, 0x18000000); /* 256 byte threshold */ + out_be32 ((void*)(EMAC_TRTR + hw_addr), 0x18000000); /* 256 byte threshold */ /* set receive low/high water mark register */ #if defined(CONFIG_440) /* 440s has a 64 byte burst length */ - out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x80009000); + out_be32 ((void*)(EMAC_RX_HI_LO_WMARK + hw_addr), 0x80009000); #else /* 405s have a 16 byte burst length */ - out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x0f002000); + out_be32 ((void*)(EMAC_RX_HI_LO_WMARK + hw_addr), 0x0f002000); #endif /* defined(CONFIG_440) */ - out32 (EMAC_TXM1 + hw_addr, 0xf8640000); + out_be32 ((void*)(EMAC_TXM1 + hw_addr), 0xf8640000); /* Set fifo limit entry in tx mode 0 */ - out32 (EMAC_TXM0 + hw_addr, 0x00000003); + out_be32 ((void*)(EMAC_TXM0 + hw_addr), 0x00000003); /* Frame gap set */ - out32 (EMAC_I_FRAME_GAP_REG + hw_addr, 0x00000008); + out_be32 ((void*)(EMAC_I_FRAME_GAP_REG + hw_addr), 0x00000008); sync (); } @@ -272,7 +272,7 @@ static void ether_post_halt (int devnum, int hw_addr) udelay (1000); } /* emac reset */ - out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST); + out_be32 ((void*)(EMAC_M0 + hw_addr), EMAC_M0_SRST); #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* remove clocks for EMAC internal loopback */ @@ -302,7 +302,7 @@ static void ether_post_send (int devnum, int hw_addr, void *packet, int length) flush_dcache_range((u32)tx.data_ptr, (u32)tx.data_ptr + length); sync (); - out32 (EMAC_TXM0 + hw_addr, in32 (EMAC_TXM0 + hw_addr) | EMAC_TXM0_GNP0); + out_be32 ((void*)(EMAC_TXM0 + hw_addr), in_be32 ((void*)(EMAC_TXM0 + hw_addr)) | EMAC_TXM0_GNP0); sync (); } |