diff options
| -rw-r--r-- | arch/arm/include/asm/arch-s5pc1xx/cpu.h | 2 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-s5pc1xx/mmc.h | 71 | ||||
| -rw-r--r-- | board/samsung/goni/goni.c | 37 | ||||
| -rw-r--r-- | drivers/mmc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mmc/s5p_mmc.c | 478 | ||||
| -rw-r--r-- | drivers/serial/serial_s5p.c | 4 | ||||
| -rw-r--r-- | include/configs/s5p_goni.h | 6 |
7 files changed, 597 insertions, 2 deletions
diff --git a/arch/arm/include/asm/arch-s5pc1xx/cpu.h b/arch/arm/include/asm/arch-s5pc1xx/cpu.h index 90485aa..b3af8cc 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/cpu.h +++ b/arch/arm/include/asm/arch-s5pc1xx/cpu.h @@ -38,6 +38,7 @@ #define S5PC100_PWMTIMER_BASE 0xEA000000 #define S5PC100_WATCHDOG_BASE 0xEA200000 #define S5PC100_UART_BASE 0xEC000000 +#define S5PC100_MMC_BASE 0xED800000 /* S5PC110 */ #define S5PC110_GPIO_BASE 0xE0200000 @@ -45,6 +46,7 @@ #define S5PC110_WATCHDOG_BASE 0xE2700000 #define S5PC110_UART_BASE 0xE2900000 #define S5PC110_SROMC_BASE 0xE8000000 +#define S5PC110_MMC_BASE 0xEB000000 #define S5PC110_DMC0_BASE 0xF0000000 #define S5PC110_DMC1_BASE 0xF1400000 #define S5PC110_VIC0_BASE 0xF2000000 diff --git a/arch/arm/include/asm/arch-s5pc1xx/mmc.h b/arch/arm/include/asm/arch-s5pc1xx/mmc.h new file mode 100644 index 0000000..ac560c2 --- /dev/null +++ b/arch/arm/include/asm/arch-s5pc1xx/mmc.h @@ -0,0 +1,71 @@ +/* + * (C) Copyright 2009 SAMSUNG Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_MMC_H_ +#define __ASM_ARCH_MMC_H_ + +#ifndef __ASSEMBLY__ +struct s5p_mmc { + unsigned int sysad; + unsigned short blksize; + unsigned short blkcnt; + unsigned int argument; + unsigned short trnmod; + unsigned short cmdreg; + unsigned int rspreg0; + unsigned int rspreg1; + unsigned int rspreg2; + unsigned int rspreg3; + unsigned int bdata; + unsigned int prnsts; + unsigned char hostctl; + unsigned char pwrcon; + unsigned char blkgap; + unsigned char wakcon; + unsigned short clkcon; + unsigned char timeoutcon; + unsigned char swrst; + unsigned int norintsts; /* errintsts */ + unsigned int norintstsen; /* errintstsen */ + unsigned int norintsigen; /* errintsigen */ + unsigned short acmd12errsts; + unsigned char res1[2]; + unsigned int capareg; + unsigned char res2[4]; + unsigned int maxcurr; + unsigned char res3[0x34]; + unsigned int control2; + unsigned int control3; + unsigned int control4; + unsigned char res4[0x6e]; + unsigned short hcver; + unsigned char res5[0xFFF00]; +}; + +struct mmc_host { + struct s5p_mmc *reg; + unsigned int version; /* SDHCI spec. version */ + unsigned int clock; /* Current clock (MHz) */ +}; + +int s5p_mmc_init(int dev_index); + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index e512c59..060d5d1 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -23,11 +23,18 @@ */ #include <common.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc.h> DECLARE_GLOBAL_DATA_PTR; +static struct s5pc110_gpio *s5pc110_gpio; + int board_init(void) { + /* Set Initial global variables */ + s5pc110_gpio = (struct s5pc110_gpio *)S5PC110_GPIO_BASE; + gd->bd->bi_arch_number = MACH_TYPE_GONI; gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; @@ -53,3 +60,33 @@ int checkboard(void) return 0; } #endif + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + int i; + + /* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */ + gpio_direction_output(&s5pc110_gpio->gpio_j2, 7, 1); + + /* + * MMC0 GPIO + * GPG0[0] SD_0_CLK + * GPG0[1] SD_0_CMD + * GPG0[2] SD_0_CDn -> Not used + * GPG0[3:6] SD_0_DATA[0:3] + */ + for (i = 0; i < 7; i++) { + if (i == 2) + continue; + /* GPG0[0:6] special function 2 */ + gpio_cfg_pin(&s5pc110_gpio->gpio_g0, i, 0x2); + /* GPG0[0:6] pull disable */ + gpio_set_pull(&s5pc110_gpio->gpio_g0, i, GPIO_PULL_NONE); + /* GPG0[0:6] drv 4x */ + gpio_set_drv(&s5pc110_gpio->gpio_g0, i, GPIO_DRV_4X); + } + + return s5p_mmc_init(0); +} +#endif diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 6fa04b8..8dfd8a3 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -32,6 +32,7 @@ COBJS-$(CONFIG_OMAP3_MMC) += omap3_mmc.o COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o +COBJS-$(CONFIG_S5P_MMC) += s5p_mmc.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/mmc/s5p_mmc.c b/drivers/mmc/s5p_mmc.c new file mode 100644 index 0000000..669b1d0 --- /dev/null +++ b/drivers/mmc/s5p_mmc.c @@ -0,0 +1,478 @@ +/* + * (C) Copyright 2009 SAMSUNG Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * Jaehoon Chung <jh80.chung@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <common.h> +#include <mmc.h> +#include <asm/io.h> +#include <asm/arch/mmc.h> + +#ifdef DEBUG_S5P_HSMMC +#define dbg(x...) printf(x) +#else +#define dbg(x...) do { } while (0) +#endif + +/* support 4 mmc hosts */ +struct mmc mmc_dev[4]; +struct mmc_host mmc_host[4]; + +static inline struct s5p_mmc *s5p_get_base_mmc(int dev_index) +{ + unsigned long offset = dev_index * sizeof(struct s5p_mmc); + + if (cpu_is_s5pc100()) + return (struct s5p_mmc *)(S5PC100_MMC_BASE + offset); + else + return (struct s5p_mmc *)(S5PC110_MMC_BASE + offset); +} + +static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data) +{ + unsigned char ctrl; + + dbg("data->dest: %08x\n", (u32)data->dest); + writel((u32)data->dest, &host->reg->sysad); + /* + * DMASEL[4:3] + * 00 = Selects SDMA + * 01 = Reserved + * 10 = Selects 32-bit Address ADMA2 + * 11 = Selects 64-bit Address ADMA2 + */ + ctrl = readb(&host->reg->hostctl); + ctrl &= ~(3 << 3); + writeb(ctrl, &host->reg->hostctl); + + /* We do not handle DMA boundaries, so set it to max (512 KiB) */ + writew((7 << 12) | (512 << 0), &host->reg->blksize); + writew(data->blocks, &host->reg->blkcnt); +} + +static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data) +{ + unsigned short mode; + + /* + * TRNMOD + * MUL1SIN0[5] : Multi/Single Block Select + * RD1WT0[4] : Data Transfer Direction Select + * 1 = read + * 0 = write + * ENACMD12[2] : Auto CMD12 Enable + * ENBLKCNT[1] : Block Count Enable + * ENDMA[0] : DMA Enable + */ + mode = (1 << 1) | (1 << 0); + if (data->blocks > 1) + mode |= (1 << 5); + if (data->flags & MMC_DATA_READ) + mode |= (1 << 4); + + writew(mode, &host->reg->trnmod); +} + +static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct mmc_host *host = (struct mmc_host *)mmc->priv; + int flags, i; + unsigned int timeout; + unsigned int mask; + unsigned int retry = 0x100000; + + /* Wait max 10 ms */ + timeout = 10; + + /* + * PRNSTS + * CMDINHDAT[1] : Command Inhibit (DAT) + * CMDINHCMD[0] : Command Inhibit (CMD) + */ + mask = (1 << 0); + if ((data != NULL) || (cmd->resp_type & MMC_RSP_BUSY)) + mask |= (1 << 1); + + /* + * We shouldn't wait for data inihibit for stop commands, even + * though they might use busy signaling + */ + if (data) + mask &= ~(1 << 1); + + while (readl(&host->reg->prnsts) & mask) { + if (timeout == 0) { + printf("%s: timeout error\n", __func__); + return -1; + } + timeout--; + udelay(1000); + } + + if (data) + mmc_prepare_data(host, data); + + dbg("cmd->arg: %08x\n", cmd->cmdarg); + writel(cmd->cmdarg, &host->reg->argument); + + if (data) + mmc_set_transfer_mode(host, data); + + if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY)) + return -1; + + /* + * CMDREG + * CMDIDX[13:8] : Command index + * DATAPRNT[5] : Data Present Select + * ENCMDIDX[4] : Command Index Check Enable + * ENCMDCRC[3] : Command CRC Check Enable + * RSPTYP[1:0] + * 00 = No Response + * 01 = Length 136 + * 10 = Length 48 + * 11 = Length 48 Check busy after response + */ + if (!(cmd->resp_type & MMC_RSP_PRESENT)) + flags = 0; + else if (cmd->resp_type & MMC_RSP_136) + flags = (1 << 0); + else if (cmd->resp_type & MMC_RSP_BUSY) + flags = (3 << 0); + else + flags = (2 << 0); + + if (cmd->resp_type & MMC_RSP_CRC) + flags |= (1 << 3); + if (cmd->resp_type & MMC_RSP_OPCODE) + flags |= (1 << 4); + if (data) + flags |= (1 << 5); + + dbg("cmd: %d\n", cmd->cmdidx); + + writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg); + + for (i = 0; i < retry; i++) { + mask = readl(&host->reg->norintsts); + /* Command Complete */ + if (mask & (1 << 0)) { + if (!data) + writel(mask, &host->reg->norintsts); + break; + } + } + + if (i == retry) { + printf("%s: waiting for status update\n", __func__); + return TIMEOUT; + } + + if (mask & (1 << 16)) { + /* Timeout Error */ + dbg("timeout: %08x cmd %d\n", mask, cmd->cmdidx); + return TIMEOUT; + } else if (mask & (1 << 15)) { + /* Error Interrupt */ + dbg("error: %08x cmd %d\n", mask, cmd->cmdidx); + return -1; + } + + if (cmd->resp_type & MMC_RSP_PRESENT) { + if (cmd->resp_type & MMC_RSP_136) { + /* CRC is stripped so we need to do some shifting. */ + for (i = 0; i < 4; i++) { + unsigned int offset = + (unsigned int)(&host->reg->rspreg3 - i); + cmd->response[i] = readl(offset) << 8; + + if (i != 3) { + cmd->response[i] |= + readb(offset - 1); + } + dbg("cmd->resp[%d]: %08x\n", + i, cmd->response[i]); + } + } else if (cmd->resp_type & MMC_RSP_BUSY) { + for (i = 0; i < retry; i++) { + /* PRNTDATA[23:20] : DAT[3:0] Line Signal */ + if (readl(&host->reg->prnsts) + & (1 << 20)) /* DAT[0] */ + break; + } + + if (i == retry) { + printf("%s: card is still busy\n", __func__); + return TIMEOUT; + } + + cmd->response[0] = readl(&host->reg->rspreg0); + dbg("cmd->resp[0]: %08x\n", cmd->response[0]); + } else { + cmd->response[0] = readl(&host->reg->rspreg0); + dbg("cmd->resp[0]: %08x\n", cmd->response[0]); + } + } + + if (data) { + while (1) { + mask = readl(&host->reg->norintsts); + + if (mask & (1 << 15)) { + /* Error Interrupt */ + writel(mask, &host->reg->norintsts); + printf("%s: error during transfer: 0x%08x\n", + __func__, mask); + return -1; + } else if (mask & (1 << 3)) { + /* DMA Interrupt */ + dbg("DMA end\n"); + break; + } else if (mask & (1 << 1)) { + /* Transfer Complete */ + dbg("r/w is done\n"); + break; + } + } + writel(mask, &host->reg->norintsts); + } + + udelay(1000); + return 0; +} + +static void mmc_change_clock(struct mmc_host *host, uint clock) +{ + int div; + unsigned short clk; + unsigned long timeout; + unsigned long ctrl2; + + /* + * SELBASECLK[5:4] + * 00/01 = HCLK + * 10 = EPLL + * 11 = XTI or XEXTCLK + */ + ctrl2 = readl(&host->reg->control2); + ctrl2 &= ~(3 << 4); + ctrl2 |= (2 << 4); + writel(ctrl2, &host->reg->control2); + + writew(0, &host->reg->clkcon); + + /* XXX: we assume that clock is between 40MHz and 50MHz */ + if (clock == 0) + goto out; + else if (clock <= 400000) + div = 0x100; + else if (clock <= 20000000) + div = 4; + else if (clock <= 26000000) + div = 2; + else + div = 1; + dbg("div: %d\n", div); + + div >>= 1; + /* + * CLKCON + * SELFREQ[15:8] : base clock divied by value + * ENSDCLK[2] : SD Clock Enable + * STBLINTCLK[1] : Internal Clock Stable + * ENINTCLK[0] : Internal Clock Enable + */ + clk = (div << 8) | (1 << 0); + writew(clk, &host->reg->clkcon); + + /* Wait max 10 ms */ + timeout = 10; + while (!(readw(&host->reg->clkcon) & (1 << 1))) { + if (timeout == 0) { + printf("%s: timeout error\n", __func__); + return; + } + timeout--; + udelay(1000); + } + + clk |= (1 << 2); + writew(clk, &host->reg->clkcon); + +out: + host->clock = clock; +} + +static void mmc_set_ios(struct mmc *mmc) +{ + struct mmc_host *host = mmc->priv; + unsigned char ctrl; + unsigned long val; + + dbg("set_ios: bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock); + + /* + * SELCLKPADDS[17:16] + * 00 = 2mA + * 01 = 4mA + * 10 = 7mA + * 11 = 9mA + */ + writel(0x3 << 16, &host->reg->control4); + + val = readl(&host->reg->control2); + val &= (0x3 << 4); + + val |= (1 << 31) | /* write status clear async mode enable */ + (1 << 30) | /* command conflict mask enable */ + (1 << 14) | /* Feedback Clock Enable for Rx Clock */ + (1 << 8); /* SDCLK hold enable */ + + writel(val, &host->reg->control2); + + /* + * FCSEL1[15] FCSEL0[7] + * FCSel[1:0] : Rx Feedback Clock Delay Control + * Inverter delay means10ns delay if SDCLK 50MHz setting + * 01 = Delay1 (basic delay) + * 11 = Delay2 (basic delay + 2ns) + * 00 = Delay3 (inverter delay) + * 10 = Delay4 (inverter delay + 2ns) + */ + writel(0x8080, &host->reg->control3); + + mmc_change_clock(host, mmc->clock); + + ctrl = readb(&host->reg->hostctl); + + /* + * WIDE4[1] + * 1 = 4-bit mode + * 0 = 1-bit mode + */ + if (mmc->bus_width == 4) + ctrl |= (1 << 1); + else + ctrl &= ~(1 << 1); + + /* + * OUTEDGEINV[2] + * 1 = Riging edge output + * 0 = Falling edge output + */ + ctrl &= ~(1 << 2); + + writeb(ctrl, &host->reg->hostctl); +} + +static void mmc_reset(struct mmc_host *host) +{ + unsigned int timeout; + + /* + * RSTALL[0] : Software reset for all + * 1 = reset + * 0 = work + */ + writeb((1 << 0), &host->reg->swrst); + + host->clock = 0; + + /* Wait max 100 ms */ + timeout = 100; + + /* hw clears the bit when it's done */ + while (readb(&host->reg->swrst) & (1 << 0)) { + if (timeout == 0) { + printf("%s: timeout error\n", __func__); + return; + } + timeout--; + udelay(1000); + } +} + +static int mmc_core_init(struct mmc *mmc) +{ + struct mmc_host *host = (struct mmc_host *)mmc->priv; + unsigned int mask; + + mmc_reset(host); + + host->version = readw(&host->reg->hcver); + + /* mask all */ + writel(0xffffffff, &host->reg->norintstsen); + writel(0xffffffff, &host->reg->norintsigen); + + writeb(0xe, &host->reg->timeoutcon); /* TMCLK * 2^27 */ + + /* + * NORMAL Interrupt Status Enable Register init + * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable + * [4] ENSTABUFWTRDY : Buffer write Ready Status Enable + * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable + * [0] ENSTACMDCMPLT : Command Complete Status Enable + */ + mask = readl(&host->reg->norintstsen); + mask &= ~(0xffff); + mask |= (1 << 5) | (1 << 4) | (1 << 1) | (1 << 0); + writel(mask, &host->reg->norintstsen); + + /* + * NORMAL Interrupt Signal Enable Register init + * [1] ENSTACMDCMPLT : Transfer Complete Signal Enable + */ + mask = readl(&host->reg->norintsigen); + mask &= ~(0xffff); + mask |= (1 << 1); + writel(mask, &host->reg->norintsigen); + + return 0; +} + +static int s5p_mmc_initialize(int dev_index) +{ + struct mmc *mmc; + + mmc = &mmc_dev[dev_index]; + + sprintf(mmc->name, "SAMSUNG SD/MMC"); + mmc->priv = &mmc_host[dev_index]; + mmc->send_cmd = mmc_send_cmd; + mmc->set_ios = mmc_set_ios; + mmc->init = mmc_core_init; + + mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS; + + mmc->f_min = 400000; + mmc->f_max = 52000000; + + mmc_host[dev_index].clock = 0; + mmc_host[dev_index].reg = s5p_get_base_mmc(dev_index); + mmc_register(mmc); + + return 0; +} + +int s5p_mmc_init(int dev_index) +{ + return s5p_mmc_initialize(dev_index); +} diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index 9747db3..e0d4e80 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -133,7 +133,7 @@ int serial_getc_dev(const int dev_index) return 0; } - return (int)(readl(&uart->urxh) & 0xff); + return (int)(readb(&uart->urxh) & 0xff); } /* @@ -149,7 +149,7 @@ void serial_putc_dev(const char c, const int dev_index) return; } - writel(c, &uart->utxh); + writeb(c, &uart->utxh); /* If \n, also do \r */ if (c == '\n') diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index ff0dbd3..c8ea8fd 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -67,6 +67,11 @@ #define CONFIG_SERIAL_MULTI 1 #define CONFIG_BAUDRATE 115200 +/* MMC */ +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_MMC 1 +#define CONFIG_S5P_MMC 1 + /* It should define before config_cmd_default.h */ #define CONFIG_SYS_NO_FLASH 1 @@ -82,6 +87,7 @@ #define CONFIG_CMD_REGINFO #define CONFIG_CMD_ONENAND #define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_MMC #define CONFIG_BOOTDELAY 1 #define CONFIG_ZERO_BOOTDELAY_CHECK |