diff options
| -rw-r--r-- | arch/arm/cpu/armv7/mx5/lowlevel_init.S | 38 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-mx5/imx-regs.h | 5 | ||||
| -rw-r--r-- | doc/README.imx5 | 17 |
3 files changed, 60 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 94de9f1..6c66b42 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -121,6 +121,35 @@ beq 1b .endm +.macro setup_pll_errata pll, freq + ldr r2, =\pll + mov r1, #0x0 + str r1, [r2, #PLL_DP_CONFIG] /* Disable auto-restart AREN bit */ + ldr r1, =0x00001236 + str r1, [r2, #PLL_DP_CTL] /* Restart PLL with PLM=1 */ +1: ldr r1, [r2, #PLL_DP_CTL] /* Wait for lock */ + ands r1, r1, #0x1 + beq 1b + + ldr r5, \freq + str r5, [r2, #PLL_DP_MFN] /* Modify MFN value */ + str r5, [r2, #PLL_DP_HFS_MFN] + + mov r1, #0x1 + str r1, [r2, #PLL_DP_CONFIG] /* Reload MFN value */ + +2: ldr r1, [r2, #PLL_DP_CONFIG] + tst r1, #1 + bne 2b + + ldr r1, =100 /* Wait at least 4 us */ +3: subs r1, r1, #1 + bge 3b + + mov r1, #0x2 + str r1, [r2, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */ +.endm + .macro init_clock ldr r0, =CCM_BASE_ADDR @@ -157,7 +186,12 @@ mov r1, #0x4 str r1, [r0, #CLKCTL_CCSR] +#if defined(CONFIG_MX51_PLL_ERRATA) + setup_pll PLL1_BASE_ADDR, 864 + setup_pll_errata PLL1_BASE_ADDR, W_DP_MFN_800_DIT +#else setup_pll PLL1_BASE_ADDR, 800 +#endif #if defined(CONFIG_MX51) setup_pll PLL3_BASE_ADDR, 665 @@ -287,6 +321,10 @@ lowlevel_init: mov pc,lr /* Board level setting value */ +W_DP_OP_864: .word DP_OP_864 +W_DP_MFD_864: .word DP_MFD_864 +W_DP_MFN_864: .word DP_MFN_864 +W_DP_MFN_800_DIT: .word DP_MFN_800_DIT W_DP_OP_800: .word DP_OP_800 W_DP_MFD_800: .word DP_MFD_800 W_DP_MFN_800: .word DP_MFN_800 diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index e83ca29..fb2c66f 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -235,6 +235,11 @@ /* Assuming 24MHz input clock with doubler ON */ /* MFI PDF */ +#define DP_OP_864 ((8 << 4) + ((1 - 1) << 0)) +#define DP_MFD_864 (180 - 1) /* PL Dither mode */ +#define DP_MFN_864 180 +#define DP_MFN_800_DIT 60 /* PL Dither mode */ + #define DP_OP_850 ((8 << 4) + ((1 - 1) << 0)) #define DP_MFD_850 (48 - 1) #define DP_MFN_850 41 diff --git a/doc/README.imx5 b/doc/README.imx5 new file mode 100644 index 0000000..f7eab7d --- /dev/null +++ b/doc/README.imx5 @@ -0,0 +1,17 @@ +U-Boot for Freescale i.MX5x + +This file contains information for the port of U-Boot to the Freescale +i.MX5x SoCs. + +1. CONFIGURATION OPTIONS/SETTINGS +--------------------------------- + +1.1 CONFIG_MX51_PLL_ERRATA: Workaround for i.MX51 PLL errata. + This option should be enabled by all boards using the i.MX51 silicon + version up until (including) 3.0 running at 800MHz. + The PLL's in the i.MX51 processor can go out of lock due to a metastable + condition in an analog flip-flop when used at high frequencies. + This workaround implements an undocumented feature in the PLL (dither + mode), which causes the effect of this failure to be much lower (in terms + of frequency deviation), avoiding system failure, or at least decreasing + the likelihood of system failure. |