summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/mtd/nand/nand_base.c17
-rw-r--r--nand_spl/nand_boot.c64
2 files changed, 71 insertions, 10 deletions
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 151f535..2da1d46 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -931,7 +931,7 @@ static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int pa
for (i = 0; i < eccbytes; i++, eccidx++)
oob_buf[oob_config[eccidx]] = ecc_code[i];
/* If the hardware ecc provides syndromes then
- * the ecc code must be written immidiately after
+ * the ecc code must be written immediately after
* the data bytes (words) */
if (this->options & NAND_HWECC_SYNDROME)
this->write_buf(mtd, ecc_code, eccbytes);
@@ -1299,7 +1299,7 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
for (i = 0, j = 0; j < mtd->oobavail; i++) {
int from = oobsel->oobfree[i][0];
int num = oobsel->oobfree[i][1];
- memcpy(&oob_buf[oob], &oob_data[from], num);
+ memcpy(&oob_buf[oob+j], &oob_data[from], num);
j+= num;
}
oob += mtd->oobavail;
@@ -1644,8 +1644,10 @@ static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
this->select_chip(mtd, chipnr);
/* Check, if it is write protected */
- if (nand_check_wp(mtd))
+ if (nand_check_wp(mtd)) {
+ printk (KERN_NOTICE "nand_write_ecc: Device is write protected\n");
goto out;
+ }
/* if oobsel is NULL, use chip defaults */
if (oobsel == NULL)
@@ -2486,12 +2488,9 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
/* The number of bytes available for the filesystem to place fs dependend
* oob data */
- if (this->options & NAND_BUSWIDTH_16) {
- mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2);
- if (this->autooob->eccbytes & 0x01)
- mtd->oobavail--;
- } else
- mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1);
+ mtd->oobavail = 0;
+ for (i=0; this->autooob->oobfree[i][1]; i++)
+ mtd->oobavail += this->autooob->oobfree[i][1];
/*
* check ECC mode, default to software
diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c
index e2147cb..bc57725 100644
--- a/nand_spl/nand_boot.c
+++ b/nand_spl/nand_boot.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2006-2007
+ * (C) Copyright 2006-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* This program is free software; you can redistribute it and/or
@@ -28,6 +28,10 @@ static int nand_ecc_pos[] = CFG_NAND_ECCPOS;
extern void board_nand_init(struct nand_chip *nand);
+#if (CFG_NAND_PAGE_SIZE <= 512)
+/*
+ * NAND command for small page NAND devices (512)
+ */
static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd)
{
struct nand_chip *this = mtd->priv;
@@ -65,6 +69,64 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8
return 0;
}
+#else
+/*
+ * NAND command for large page NAND devices (2k)
+ */
+static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd)
+{
+ struct nand_chip *this = mtd->priv;
+ int page_offs = offs;
+ int page_addr = page + block * CFG_NAND_PAGE_COUNT;
+
+ if (this->dev_ready)
+ this->dev_ready(mtd);
+ else
+ CFG_NAND_READ_DELAY;
+
+ /* Emulate NAND_CMD_READOOB */
+ if (cmd == NAND_CMD_READOOB) {
+ page_offs += CFG_NAND_PAGE_SIZE;
+ cmd = NAND_CMD_READ0;
+ }
+
+ /* Begin command latch cycle */
+ this->hwcontrol(mtd, NAND_CTL_SETCLE);
+ this->write_byte(mtd, cmd);
+ /* Set ALE and clear CLE to start address cycle */
+ this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+ this->hwcontrol(mtd, NAND_CTL_SETALE);
+ /* Column address */
+ this->write_byte(mtd, page_offs & 0xff); /* A[7:0] */
+ this->write_byte(mtd, (uchar)((page_offs >> 8) & 0xff)); /* A[11:9] */
+ /* Row address */
+ this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[19:12] */
+ this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[27:20] */
+#ifdef CFG_NAND_5_ADDR_CYCLE
+ /* One more address cycle for devices > 128MiB */
+ this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f)); /* A[xx:28] */
+#endif
+ /* Latch in address */
+ this->hwcontrol(mtd, NAND_CTL_CLRALE);
+
+ /* Begin command latch cycle */
+ this->hwcontrol(mtd, NAND_CTL_SETCLE);
+ /* Write out the start read command */
+ this->write_byte(mtd, NAND_CMD_READSTART);
+ /* End command latch cycle */
+ this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+
+ /*
+ * Wait a while for the data to be ready
+ */
+ if (this->dev_ready)
+ this->dev_ready(mtd);
+ else
+ CFG_NAND_READ_DELAY;
+
+ return 0;
+}
+#endif
static int nand_is_bad_block(struct mtd_info *mtd, int block)
{