diff options
70 files changed, 4112 insertions, 54 deletions
@@ -937,6 +937,13 @@ OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE $(call if_changed,pad_cat) +ifneq ($(CONFIG_SUNXI),) +OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ + --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff +u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE + $(call if_changed,pad_cat) +endif + ifneq ($(CONFIG_TEGRA),) OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE) u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE @@ -1163,6 +1170,9 @@ spl/u-boot-spl.bin: spl/u-boot-spl spl/u-boot-spl: tools prepare $(Q)$(MAKE) obj=spl -f $(srctree)/spl/Makefile all +spl/sunxi-spl.bin: spl/u-boot-spl + @: + tpl/u-boot-tpl.bin: tools prepare $(Q)$(MAKE) obj=tpl -f $(srctree)/spl/Makefile all CONFIG_TPL_BUILD=y diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c index 7d7725c..0e6c0da 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c @@ -165,3 +165,20 @@ void at91_macb_hw_init(void) #endif } #endif + +#ifdef CONFIG_GENERIC_ATMEL_MCI +void at91_mci_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* MCI0 CLK */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* MCI0 CDA */ + at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* MCI0 DA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* MCI0 DA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* MCI0 DA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* MCI0 DA3 */ + + /* Enable clock */ + writel(1 << ATMEL_ID_MCI0, &pmc->pcer); +} +#endif diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index ab869b1..232118d 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -12,7 +12,7 @@ obj-y += cache_v7.o obj-y += cpu.o obj-y += syslib.o -ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY),) +ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI),) ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y) obj-y += lowlevel_init.o endif diff --git a/arch/arm/cpu/armv7/at91/config.mk b/arch/arm/cpu/armv7/at91/config.mk new file mode 100644 index 0000000..09eab70 --- /dev/null +++ b/arch/arm/cpu/armv7/at91/config.mk @@ -0,0 +1,10 @@ +# +# Copyright (C) 2014, Andreas Bießmann <andreas.devel@googlemail.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# +ifdef CONFIG_SPL_BUILD +ALL-y += boot.bin +else +ALL-y += u-boot.img +endif diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile new file mode 100644 index 0000000..a64bfa1 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -0,0 +1,25 @@ +# +# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net> +# +# Based on some other Makefile +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# +obj-y += timer.o +obj-y += board.o +obj-y += clock.o +obj-y += pinmux.o +obj-$(CONFIG_SUN7I) += clock_sun4i.o + +ifndef CONFIG_SPL_BUILD +obj-y += cpu_info.o +endif + +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_SUN7I) += dram.o +ifdef CONFIG_SPL_FEL +obj-y += start.o +endif +endif diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c new file mode 100644 index 0000000..49c9448 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -0,0 +1,111 @@ +/* + * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net> + * + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * Some init for sunxi platform. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <netdev.h> +#include <miiphy.h> +#include <serial.h> +#ifdef CONFIG_SPL_BUILD +#include <spl.h> +#endif +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/timer.h> + +#ifdef CONFIG_SPL_BUILD +/* Pointer to the global data structure for SPL */ +DECLARE_GLOBAL_DATA_PTR; + +/* The sunxi internal brom will try to loader external bootloader + * from mmc0, nand flash, mmc2. + * Unfortunately we can't check how SPL was loaded so assume + * it's always the first SD/MMC controller + */ +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_MMC1; +} + +/* No confirmation data available in SPL yet. Hardcode bootmode */ +u32 spl_boot_mode(void) +{ + return MMCSD_MODE_RAW; +} +#endif + +int gpio_init(void) +{ + sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX); + sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX); + sunxi_gpio_set_pull(SUNXI_GPB(23), 1); + + return 0; +} + +void reset_cpu(ulong addr) +{ +} + +/* do some early init */ +void s_init(void) +{ +#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I) + /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */ + asm volatile( + "mrc p15, 0, r0, c1, c0, 1\n" + "orr r0, r0, #1 << 6\n" + "mcr p15, 0, r0, c1, c0, 1\n"); +#endif + + clock_init(); + timer_init(); + gpio_init(); + +#ifdef CONFIG_SPL_BUILD + gd = &gdata; + preloader_console_init(); + + sunxi_board_init(); +#endif +} + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif + +#ifdef CONFIG_CMD_NET +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() + */ +int cpu_eth_init(bd_t *bis) +{ + int rc; + +#ifdef CONFIG_SUNXI_GMAC + rc = sunxi_gmac_initialize(bis); + if (rc < 0) { + printf("sunxi: failed to initialize gmac\n"); + return rc; + } +#endif + + return 0; +} +#endif diff --git a/arch/arm/cpu/armv7/sunxi/clock.c b/arch/arm/cpu/armv7/sunxi/clock.c new file mode 100644 index 0000000..47fb70f --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/clock.c @@ -0,0 +1,25 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/sys_proto.h> + +int clock_init(void) +{ +#ifdef CONFIG_SPL_BUILD + clock_init_safe(); +#endif + clock_init_uart(); + + return 0; +} diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c new file mode 100644 index 0000000..5a7da3c --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c @@ -0,0 +1,188 @@ +/* + * sun4i, sun5i and sun7i specific clock code + * + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/sys_proto.h> + +#ifdef CONFIG_SPL_BUILD +void clock_init_safe(void) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* Set safe defaults until PMU is configured */ + writel(AXI_DIV_1 << AXI_DIV_SHIFT | + AHB_DIV_2 << AHB_DIV_SHIFT | + APB0_DIV_1 << APB0_DIV_SHIFT | + CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, + &ccm->cpu_ahb_apb0_cfg); + writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg); + sdelay(200); + writel(AXI_DIV_1 << AXI_DIV_SHIFT | + AHB_DIV_2 << AHB_DIV_SHIFT | + APB0_DIV_1 << APB0_DIV_SHIFT | + CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, + &ccm->cpu_ahb_apb0_cfg); +#ifdef CONFIG_SUN7I + writel(0x1 << AHB_GATE_OFFSET_DMA | readl(&ccm->ahb_gate0), + &ccm->ahb_gate0); +#endif + writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); +} +#endif + +void clock_init_uart(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* uart clock source is apb1 */ + writel(APB1_CLK_SRC_OSC24M| + APB1_CLK_RATE_N_1| + APB1_CLK_RATE_M(1), + &ccm->apb1_clk_div_cfg); + + /* open the clock for uart */ + setbits_le32(&ccm->apb1_gate, + CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX-1)); +} + +int clock_twi_onoff(int port, int state) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + if (port > 2) + return -1; + + /* set the apb clock gate for twi */ + if (state) + setbits_le32(&ccm->apb1_gate, + CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port)); + else + clrbits_le32(&ccm->apb1_gate, + CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port)); + + return 0; +} + +#ifdef CONFIG_SPL_BUILD +#define PLL1_CFG(N, K, M, P) ( 1 << CCM_PLL1_CFG_ENABLE_SHIFT | \ + 0 << CCM_PLL1_CFG_VCO_RST_SHIFT | \ + 8 << CCM_PLL1_CFG_VCO_BIAS_SHIFT | \ + 0 << CCM_PLL1_CFG_PLL4_EXCH_SHIFT | \ + 16 << CCM_PLL1_CFG_BIAS_CUR_SHIFT | \ + (P)<< CCM_PLL1_CFG_DIVP_SHIFT | \ + 2 << CCM_PLL1_CFG_LCK_TMR_SHIFT | \ + (N)<< CCM_PLL1_CFG_FACTOR_N_SHIFT | \ + (K)<< CCM_PLL1_CFG_FACTOR_K_SHIFT | \ + 0 << CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT | \ + 0 << CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT | \ + (M)<< CCM_PLL1_CFG_FACTOR_M_SHIFT) + +static struct { + u32 pll1_cfg; + unsigned int freq; +} pll1_para[] = { + /* This array must be ordered by frequency. */ + { PLL1_CFG(16, 0, 0, 0), 384000000 }, + { PLL1_CFG(16, 1, 0, 0), 768000000 }, + { PLL1_CFG(20, 1, 0, 0), 960000000 }, + { PLL1_CFG(21, 1, 0, 0), 1008000000}, + { PLL1_CFG(22, 1, 0, 0), 1056000000}, + { PLL1_CFG(23, 1, 0, 0), 1104000000}, + { PLL1_CFG(24, 1, 0, 0), 1152000000}, + { PLL1_CFG(25, 1, 0, 0), 1200000000}, + { PLL1_CFG(26, 1, 0, 0), 1248000000}, + { PLL1_CFG(27, 1, 0, 0), 1296000000}, + { PLL1_CFG(28, 1, 0, 0), 1344000000}, + { PLL1_CFG(29, 1, 0, 0), 1392000000}, + { PLL1_CFG(30, 1, 0, 0), 1440000000}, + { PLL1_CFG(31, 1, 0, 0), 1488000000}, + /* Final catchall entry */ + { PLL1_CFG(31, 1, 0, 0), ~0}, +}; + +void clock_set_pll1(unsigned int hz) +{ + int i = 0; + int axi, ahb, apb0; + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* Find target frequency */ + while (pll1_para[i].freq < hz) + i++; + + hz = pll1_para[i].freq; + + /* Calculate system clock divisors */ + axi = DIV_ROUND_UP(hz, 432000000); /* Max 450MHz */ + ahb = DIV_ROUND_UP(hz/axi, 204000000); /* Max 250MHz */ + apb0 = 2; /* Max 150MHz */ + + printf("CPU: %uHz, AXI/AHB/APB: %d/%d/%d\n", hz, axi, ahb, apb0); + + /* Map divisors to register values */ + axi = axi - 1; + if (ahb > 4) + ahb = 3; + else if (ahb > 2) + ahb = 2; + else if (ahb > 1) + ahb = 1; + else + ahb = 0; + + apb0 = apb0 - 1; + + /* Switch to 24MHz clock while changing PLL1 */ + writel(AXI_DIV_1 << AXI_DIV_SHIFT | + AHB_DIV_2 << AHB_DIV_SHIFT | + APB0_DIV_1 << APB0_DIV_SHIFT | + CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, + &ccm->cpu_ahb_apb0_cfg); + sdelay(20); + + /* Configure sys clock divisors */ + writel(axi << AXI_DIV_SHIFT | + ahb << AHB_DIV_SHIFT | + apb0 << APB0_DIV_SHIFT | + CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, + &ccm->cpu_ahb_apb0_cfg); + + /* Configure PLL1 at the desired frequency */ + writel(pll1_para[i].pll1_cfg, &ccm->pll1_cfg); + sdelay(200); + + /* Switch CPU to PLL1 */ + writel(axi << AXI_DIV_SHIFT | + ahb << AHB_DIV_SHIFT | + apb0 << APB0_DIV_SHIFT | + CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, + &ccm->cpu_ahb_apb0_cfg); + sdelay(20); +} +#endif + +unsigned int clock_get_pll6(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + uint32_t rval = readl(&ccm->pll6_cfg); + int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT); + int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1; + return 24000000 * n * k / 2; +} diff --git a/arch/arm/cpu/armv7/sunxi/config.mk b/arch/arm/cpu/armv7/sunxi/config.mk new file mode 100644 index 0000000..00f5ffc --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/config.mk @@ -0,0 +1,8 @@ +# Build a combined spl + u-boot image +ifdef CONFIG_SPL +ifndef CONFIG_SPL_BUILD +ifndef CONFIG_SPL_FEL +ALL-y += u-boot-sunxi-with-spl.bin +endif +endif +endif diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c new file mode 100644 index 0000000..b4c3d5c --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c @@ -0,0 +1,19 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> + +#ifdef CONFIG_DISPLAY_CPUINFO +int print_cpuinfo(void) +{ + puts("CPU: Allwinner A20 (SUN7I)\n"); + return 0; +} +#endif diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c new file mode 100644 index 0000000..b43c4b4 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/dram.c @@ -0,0 +1,593 @@ +/* + * sunxi DRAM controller initialization + * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net> + * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net> + * + * Based on sun4i Linux kernel sources mach-sunxi/pm/standby/dram*.c + * and earlier U-Boot Allwiner A10 SPL work + * + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Berg Xing <bergxing@allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * Unfortunately the only documentation we have on the sun7i DRAM + * controller is Allwinner boot0 + boot1 code, and that code uses + * magic numbers & shifts with no explanations. Hence this code is + * rather undocumented and full of magic. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/dram.h> +#include <asm/arch/timer.h> +#include <asm/arch/sys_proto.h> + +#define CPU_CFG_CHIP_VER(n) ((n) << 6) +#define CPU_CFG_CHIP_VER_MASK CPU_CFG_CHIP_VER(0x3) +#define CPU_CFG_CHIP_REV_A 0x0 +#define CPU_CFG_CHIP_REV_C1 0x1 +#define CPU_CFG_CHIP_REV_C2 0x2 +#define CPU_CFG_CHIP_REV_B 0x3 + +/* + * Wait up to 1s for mask to be clear in given reg. + */ +static void await_completion(u32 *reg, u32 mask) +{ + unsigned long tmo = timer_get_us() + 1000000; + + while (readl(reg) & mask) { + if (timer_get_us() > tmo) + panic("Timeout initialising DRAM\n"); + } +} + +static void mctl_ddr3_reset(void) +{ + struct sunxi_dram_reg *dram = + (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrbits_le32(&dram->mcr, DRAM_MCR_RESET); + udelay(2); + setbits_le32(&dram->mcr, DRAM_MCR_RESET); +} + +static void mctl_set_drive(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28), + DRAM_MCR_MODE_EN(0x3) | + 0xffc); +} + +static void mctl_itm_disable(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrsetbits_le32(&dram->ccr, DRAM_CCR_INIT, DRAM_CCR_ITM_OFF); +} + +static void mctl_itm_enable(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrbits_le32(&dram->ccr, DRAM_CCR_ITM_OFF); +} + +static void mctl_enable_dll0(u32 phase) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrsetbits_le32(&dram->dllcr[0], 0x3f << 6, + ((phase >> 16) & 0x3f) << 6); + clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET, DRAM_DLLCR_DISABLE); + udelay(2); + + clrbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET | DRAM_DLLCR_DISABLE); + udelay(22); + + clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_DISABLE, DRAM_DLLCR_NRESET); + udelay(22); +} + +/* + * Note: This differs from pm/standby in that it checks the bus width + */ +static void mctl_enable_dllx(u32 phase) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 i, n, bus_width; + + bus_width = readl(&dram->dcr); + + if ((bus_width & DRAM_DCR_BUS_WIDTH_MASK) == + DRAM_DCR_BUS_WIDTH(DRAM_DCR_BUS_WIDTH_32BIT)) + n = DRAM_DCR_NR_DLLCR_32BIT; + else + n = DRAM_DCR_NR_DLLCR_16BIT; + + for (i = 1; i < n; i++) { + clrsetbits_le32(&dram->dllcr[i], 0xf << 14, + (phase & 0xf) << 14); + clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET, + DRAM_DLLCR_DISABLE); + phase >>= 4; + } + udelay(2); + + for (i = 1; i < n; i++) + clrbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET | + DRAM_DLLCR_DISABLE); + udelay(22); + + for (i = 1; i < n; i++) + clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_DISABLE, + DRAM_DLLCR_NRESET); + udelay(22); +} + +static u32 hpcr_value[32] = { +#ifdef CONFIG_SUN7I + 0x0301, 0x0301, 0x0301, 0x0301, + 0x0301, 0x0301, 0x0301, 0x0301, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0x1031, 0x1031, 0x0735, 0x1035, + 0x1035, 0x0731, 0x1031, 0x0735, + 0x1035, 0x1031, 0x0731, 0x1035, + 0x0001, 0x1031, 0, 0x1031 + /* last row differs from boot0 source table + * 0x1031, 0x0301, 0x0301, 0x0731 + * but boot0 code skips #28 and #30, and sets #29 and #31 to the + * value from #28 entry (0x1031) + */ +#endif +}; + +static void mctl_configure_hostport(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 i; + + for (i = 0; i < 32; i++) + writel(hpcr_value[i], &dram->hpcr[i]); +} + +static void mctl_setup_dram_clock(u32 clk) +{ + u32 reg_val; + struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* setup DRAM PLL */ + reg_val = readl(&ccm->pll5_cfg); + reg_val &= ~CCM_PLL5_CTRL_M_MASK; /* set M to 0 (x1) */ + reg_val &= ~CCM_PLL5_CTRL_K_MASK; /* set K to 0 (x1) */ + reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */ + reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */ + if (clk >= 540 && clk < 552) { + /* dram = 540MHz, pll5p = 540MHz */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15)); + reg_val |= CCM_PLL5_CTRL_P(1); + } else if (clk >= 512 && clk < 528) { + /* dram = 512MHz, pll5p = 384MHz */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16)); + reg_val |= CCM_PLL5_CTRL_P(2); + } else if (clk >= 496 && clk < 504) { + /* dram = 496MHz, pll5p = 372MHz */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31)); + reg_val |= CCM_PLL5_CTRL_P(2); + } else if (clk >= 468 && clk < 480) { + /* dram = 468MHz, pll5p = 468MHz */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13)); + reg_val |= CCM_PLL5_CTRL_P(1); + } else if (clk >= 396 && clk < 408) { + /* dram = 396MHz, pll5p = 396MHz */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11)); + reg_val |= CCM_PLL5_CTRL_P(1); + } else { + /* any other frequency that is a multiple of 24 */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24)); + reg_val |= CCM_PLL5_CTRL_P(CCM_PLL5_CTRL_P_X(2)); + } + reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN; /* PLL VCO Gain off */ + reg_val |= CCM_PLL5_CTRL_EN; /* PLL On */ + writel(reg_val, &ccm->pll5_cfg); + udelay(5500); + + setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK); + +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I) + /* reset GPS */ + clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE); + setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS); + udelay(1); + clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS); +#endif + + /* setup MBUS clock */ + reg_val = CCM_MBUS_CTRL_GATE | + CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) | + CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(2)) | + CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2)); + writel(reg_val, &ccm->mbus_clk_cfg); + + /* + * open DRAMC AHB & DLL register clock + * close it first + */ + clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL); + udelay(22); + + /* then open it */ + setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL); + udelay(22); +} + +static int dramc_scan_readpipe(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 reg_val; + + /* data training trigger */ +#ifdef CONFIG_SUN7I + clrbits_le32(&dram->csr, DRAM_CSR_FAILED); +#endif + setbits_le32(&dram->ccr, DRAM_CCR_DATA_TRAINING); + + /* check whether data training process has completed */ + await_completion(&dram->ccr, DRAM_CCR_DATA_TRAINING); + + /* check data training result */ + reg_val = readl(&dram->csr); + if (reg_val & DRAM_CSR_FAILED) + return -1; + + return 0; +} + +static int dramc_scan_dll_para(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + const u32 dqs_dly[7] = {0x3, 0x2, 0x1, 0x0, 0xe, 0xd, 0xc}; + const u32 clk_dly[15] = {0x07, 0x06, 0x05, 0x04, 0x03, + 0x02, 0x01, 0x00, 0x08, 0x10, + 0x18, 0x20, 0x28, 0x30, 0x38}; + u32 clk_dqs_count[15]; + u32 dqs_i, clk_i, cr_i; + u32 max_val, min_val; + u32 dqs_index, clk_index; + + /* Find DQS_DLY Pass Count for every CLK_DLY */ + for (clk_i = 0; clk_i < 15; clk_i++) { + clk_dqs_count[clk_i] = 0; + clrsetbits_le32(&dram->dllcr[0], 0x3f << 6, + (clk_dly[clk_i] & 0x3f) << 6); + for (dqs_i = 0; dqs_i < 7; dqs_i++) { + for (cr_i = 1; cr_i < 5; cr_i++) { + clrsetbits_le32(&dram->dllcr[cr_i], + 0x4f << 14, + (dqs_dly[dqs_i] & 0x4f) << 14); + } + udelay(2); + if (dramc_scan_readpipe() == 0) + clk_dqs_count[clk_i]++; + } + } + /* Test DQS_DLY Pass Count for every CLK_DLY from up to down */ + for (dqs_i = 15; dqs_i > 0; dqs_i--) { + max_val = 15; + min_val = 15; + for (clk_i = 0; clk_i < 15; clk_i++) { + if (clk_dqs_count[clk_i] == dqs_i) { + max_val = clk_i; + if (min_val == 15) + min_val = clk_i; + } + } + if (max_val < 15) + break; + } + + /* Check if Find a CLK_DLY failed */ + if (!dqs_i) + goto fail; + + /* Find the middle index of CLK_DLY */ + clk_index = (max_val + min_val) >> 1; + if ((max_val == (15 - 1)) && (min_val > 0)) + /* if CLK_DLY[MCTL_CLK_DLY_COUNT] is very good, then the middle + * value can be more close to the max_val + */ + clk_index = (15 + clk_index) >> 1; + else if ((max_val < (15 - 1)) && (min_val == 0)) + /* if CLK_DLY[0] is very good, then the middle value can be more + * close to the min_val + */ + clk_index >>= 1; + if (clk_dqs_count[clk_index] < dqs_i) + clk_index = min_val; + + /* Find the middle index of DQS_DLY for the CLK_DLY got above, and Scan + * read pipe again + */ + clrsetbits_le32(&dram->dllcr[0], 0x3f << 6, + (clk_dly[clk_index] & 0x3f) << 6); + max_val = 7; + min_val = 7; + for (dqs_i = 0; dqs_i < 7; dqs_i++) { + clk_dqs_count[dqs_i] = 0; + for (cr_i = 1; cr_i < 5; cr_i++) { + clrsetbits_le32(&dram->dllcr[cr_i], + 0x4f << 14, + (dqs_dly[dqs_i] & 0x4f) << 14); + } + udelay(2); + if (dramc_scan_readpipe() == 0) { + clk_dqs_count[dqs_i] = 1; + max_val = dqs_i; + if (min_val == 7) + min_val = dqs_i; + } + } + + if (max_val < 7) { + dqs_index = (max_val + min_val) >> 1; + if ((max_val == (7-1)) && (min_val > 0)) + dqs_index = (7 + dqs_index) >> 1; + else if ((max_val < (7-1)) && (min_val == 0)) + dqs_index >>= 1; + if (!clk_dqs_count[dqs_index]) + dqs_index = min_val; + for (cr_i = 1; cr_i < 5; cr_i++) { + clrsetbits_le32(&dram->dllcr[cr_i], + 0x4f << 14, + (dqs_dly[dqs_index] & 0x4f) << 14); + } + udelay(2); + return dramc_scan_readpipe(); + } + +fail: + clrbits_le32(&dram->dllcr[0], 0x3f << 6); + for (cr_i = 1; cr_i < 5; cr_i++) + clrbits_le32(&dram->dllcr[cr_i], 0x4f << 14); + udelay(2); + + return dramc_scan_readpipe(); +} + +static void dramc_clock_output_en(u32 on) +{ +#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + if (on) + setbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT); + else + clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT); +#endif +} + +static const u16 tRFC_table[2][6] = { + /* 256Mb 512Mb 1Gb 2Gb 4Gb 8Gb */ + /* DDR2 75ns 105ns 127.5ns 195ns 327.5ns invalid */ + { 77, 108, 131, 200, 336, 336 }, + /* DDR3 invalid 90ns 110ns 160ns 300ns 350ns */ + { 93, 93, 113, 164, 308, 359 } +}; + +static void dramc_set_autorefresh_cycle(u32 clk, u32 type, u32 density) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 tRFC, tREFI; + + tRFC = (tRFC_table[type][density] * clk + 1023) >> 10; + tREFI = (7987 * clk) >> 10; /* <= 7.8us */ + + writel(DRAM_DRR_TREFI(tREFI) | DRAM_DRR_TRFC(tRFC), &dram->drr); +} + +unsigned long dramc_init(struct dram_para *para) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 reg_val; + u32 density; + int ret_val; + + /* check input dram parameter structure */ + if (!para) + return 0; + + /* setup DRAM relative clock */ + mctl_setup_dram_clock(para->clock); + + /* reset external DRAM */ + mctl_set_drive(); + + /* dram clock off */ + dramc_clock_output_en(0); + + mctl_itm_disable(); + mctl_enable_dll0(para->tpr3); + + /* configure external DRAM */ + reg_val = 0x0; + if (para->type == DRAM_MEMORY_TYPE_DDR3) + reg_val |= DRAM_DCR_TYPE_DDR3; + reg_val |= DRAM_DCR_IO_WIDTH(para->io_width >> 3); + + if (para->density == 256) + density = DRAM_DCR_CHIP_DENSITY_256M; + else if (para->density == 512) + density = DRAM_DCR_CHIP_DENSITY_512M; + else if (para->density == 1024) + density = DRAM_DCR_CHIP_DENSITY_1024M; + else if (para->density == 2048) + density = DRAM_DCR_CHIP_DENSITY_2048M; + else if (para->density == 4096) + density = DRAM_DCR_CHIP_DENSITY_4096M; + else if (para->density == 8192) + density = DRAM_DCR_CHIP_DENSITY_8192M; + else + density = DRAM_DCR_CHIP_DENSITY_256M; + + reg_val |= DRAM_DCR_CHIP_DENSITY(density); + reg_val |= DRAM_DCR_BUS_WIDTH((para->bus_width >> 3) - 1); + reg_val |= DRAM_DCR_RANK_SEL(para->rank_num - 1); + reg_val |= DRAM_DCR_CMD_RANK_ALL; + reg_val |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE); + writel(reg_val, &dram->dcr); + +#ifdef CONFIG_SUN7I + setbits_le32(&dram->zqcr1, (0x1 << 24) | (0x1 << 1)); + if (para->tpr4 & 0x2) + clrsetbits_le32(&dram->zqcr1, (0x1 << 24), (0x1 << 1)); + dramc_clock_output_en(1); +#endif + +#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)) + /* set odt impendance divide ratio */ + reg_val = ((para->zq) >> 8) & 0xfffff; + reg_val |= ((para->zq) & 0xff) << 20; + reg_val |= (para->zq) & 0xf0000000; + writel(reg_val, &dram->zqcr0); +#endif + +#ifdef CONFIG_SUN7I + /* Set CKE Delay to about 1ms */ + setbits_le32(&dram->idcr, 0x1ffff); +#endif + +#ifdef CONFIG_SUN7I + if ((readl(&dram->ppwrsctl) & 0x1) != 0x1) + mctl_ddr3_reset(); + else + setbits_le32(&dram->mcr, DRAM_MCR_RESET); +#endif + + udelay(1); + + await_completion(&dram->ccr, DRAM_CCR_INIT); + + mctl_enable_dllx(para->tpr3); + + /* set refresh period */ + dramc_set_autorefresh_cycle(para->clock, para->type - 2, density); + + /* set timing parameters */ + writel(para->tpr0, &dram->tpr0); + writel(para->tpr1, &dram->tpr1); + writel(para->tpr2, &dram->tpr2); + + if (para->type == DRAM_MEMORY_TYPE_DDR3) { + reg_val = DRAM_MR_BURST_LENGTH(0x0); +#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)) + reg_val |= DRAM_MR_POWER_DOWN; +#endif + reg_val |= DRAM_MR_CAS_LAT(para->cas - 4); + reg_val |= DRAM_MR_WRITE_RECOVERY(0x5); + } else if (para->type == DRAM_MEMORY_TYPE_DDR2) { + reg_val = DRAM_MR_BURST_LENGTH(0x2); + reg_val |= DRAM_MR_CAS_LAT(para->cas); + reg_val |= DRAM_MR_WRITE_RECOVERY(0x5); + } + writel(reg_val, &dram->mr); + + writel(para->emr1, &dram->emr); + writel(para->emr2, &dram->emr2); + writel(para->emr3, &dram->emr3); + + /* set DQS window mode */ + clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE); + +#ifdef CONFIG_SUN7I + /* Command rate timing mode 2T & 1T */ + if (para->tpr4 & 0x1) + setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T); +#endif + /* reset external DRAM */ + setbits_le32(&dram->ccr, DRAM_CCR_INIT); + await_completion(&dram->ccr, DRAM_CCR_INIT); + +#ifdef CONFIG_SUN7I + /* setup zq calibration manual */ + reg_val = readl(&dram->ppwrsctl); + if ((reg_val & 0x1) == 1) { + /* super_standby_flag = 1 */ + + reg_val = readl(0x01c20c00 + 0x120); /* rtc */ + reg_val &= 0x000fffff; + reg_val |= 0x17b00000; + writel(reg_val, &dram->zqcr0); + + /* exit self-refresh state */ + clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27); + /* check whether command has been executed */ + await_completion(&dram->dcr, 0x1 << 31); + + udelay(2); + + /* dram pad hold off */ + setbits_le32(&dram->ppwrsctl, 0x16510000); + + await_completion(&dram->ppwrsctl, 0x1); + + /* exit self-refresh state */ + clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27); + + /* check whether command has been executed */ + await_completion(&dram->dcr, 0x1 << 31); + + udelay(2); + + /* issue a refresh command */ + clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x13 << 27); + await_completion(&dram->dcr, 0x1 << 31); + + udelay(2); + } +#endif + + /* scan read pipe value */ + mctl_itm_enable(); + if (para->tpr3 & (0x1 << 31)) { + ret_val = dramc_scan_dll_para(); + if (ret_val == 0) + para->tpr3 = + (((readl(&dram->dllcr[0]) >> 6) & 0x3f) << 16) | + (((readl(&dram->dllcr[1]) >> 14) & 0xf) << 0) | + (((readl(&dram->dllcr[2]) >> 14) & 0xf) << 4) | + (((readl(&dram->dllcr[3]) >> 14) & 0xf) << 8) | + (((readl(&dram->dllcr[4]) >> 14) & 0xf) << 12 + ); + } else { + ret_val = dramc_scan_readpipe(); + } + + if (ret_val < 0) + return 0; + + /* configure all host port */ + mctl_configure_hostport(); + + return get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE); +} diff --git a/arch/arm/cpu/armv7/sunxi/pinmux.c b/arch/arm/cpu/armv7/sunxi/pinmux.c new file mode 100644 index 0000000..1f2843f --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/pinmux.c @@ -0,0 +1,61 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/gpio.h> + +int sunxi_gpio_set_cfgpin(u32 pin, u32 val) +{ + u32 bank = GPIO_BANK(pin); + u32 index = GPIO_CFG_INDEX(pin); + u32 offset = GPIO_CFG_OFFSET(pin); + struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + + clrsetbits_le32(&pio->cfg[0] + index, 0xf << offset, val << offset); + + return 0; +} + +int sunxi_gpio_get_cfgpin(u32 pin) +{ + u32 cfg; + u32 bank = GPIO_BANK(pin); + u32 index = GPIO_CFG_INDEX(pin); + u32 offset = GPIO_CFG_OFFSET(pin); + struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + + cfg = readl(&pio->cfg[0] + index); + cfg >>= offset; + + return cfg & 0xf; +} + +int sunxi_gpio_set_drv(u32 pin, u32 val) +{ + u32 bank = GPIO_BANK(pin); + u32 index = GPIO_DRV_INDEX(pin); + u32 offset = GPIO_DRV_OFFSET(pin); + struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + + clrsetbits_le32(&pio->drv[0] + index, 0x3 << offset, val << offset); + + return 0; +} + +int sunxi_gpio_set_pull(u32 pin, u32 val) +{ + u32 bank = GPIO_BANK(pin); + u32 index = GPIO_PULL_INDEX(pin); + u32 offset = GPIO_PULL_OFFSET(pin); + struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + + clrsetbits_le32(&pio->pull[0] + index, 0x3 << offset, val << offset); + + return 0; +} diff --git a/arch/arm/cpu/armv7/sunxi/start.c b/arch/arm/cpu/armv7/sunxi/start.c new file mode 100644 index 0000000..6b392fa --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/start.c @@ -0,0 +1 @@ +/* Intentionally empty. Only needed to get FEL SPL link line right */ diff --git a/arch/arm/cpu/armv7/sunxi/timer.c b/arch/arm/cpu/armv7/sunxi/timer.c new file mode 100644 index 0000000..3626389 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/timer.c @@ -0,0 +1,113 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/timer.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define TIMER_MODE (0x0 << 7) /* continuous mode */ +#define TIMER_DIV (0x0 << 4) /* pre scale 1 */ +#define TIMER_SRC (0x1 << 2) /* osc24m */ +#define TIMER_RELOAD (0x1 << 1) /* reload internal value */ +#define TIMER_EN (0x1 << 0) /* enable timer */ + +#define TIMER_CLOCK (24 * 1000 * 1000) +#define COUNT_TO_USEC(x) ((x) / 24) +#define USEC_TO_COUNT(x) ((x) * 24) +#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ) +#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ) + +#define TIMER_LOAD_VAL 0xffffffff + +#define TIMER_NUM 0 /* we use timer 0 */ + +/* read the 32-bit timer */ +static ulong read_timer(void) +{ + struct sunxi_timer_reg *timers = + (struct sunxi_timer_reg *)SUNXI_TIMER_BASE; + struct sunxi_timer *timer = &timers->timer[TIMER_NUM]; + + /* + * The hardware timer counts down, therefore we invert to + * produce an incrementing timer. + */ + return ~readl(&timer->val); +} + +/* init timer register */ +int timer_init(void) +{ + struct sunxi_timer_reg *timers = + (struct sunxi_timer_reg *)SUNXI_TIMER_BASE; + struct sunxi_timer *timer = &timers->timer[TIMER_NUM]; + writel(TIMER_LOAD_VAL, &timer->inter); + writel(TIMER_MODE | TIMER_DIV | TIMER_SRC | TIMER_RELOAD | TIMER_EN, + &timer->ctl); + + return 0; +} + +/* timer without interrupts */ +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +ulong get_timer_masked(void) +{ + /* current tick value */ + ulong now = TICKS_TO_HZ(read_timer()); + + if (now >= gd->arch.lastinc) /* normal (non rollover) */ + gd->arch.tbl += (now - gd->arch.lastinc); + else { + /* rollover */ + gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL) + - gd->arch.lastinc) + now; + } + gd->arch.lastinc = now; + + return gd->arch.tbl; +} + +/* delay x useconds */ +void __udelay(unsigned long usec) +{ + long tmo = USEC_TO_COUNT(usec); + ulong now, last = read_timer(); + + while (tmo > 0) { + now = read_timer(); + if (now > last) /* normal (non rollover) */ + tmo -= now - last; + else /* rollover */ + tmo -= TIMER_LOAD_VAL - last + now; + last = now; + } +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} diff --git a/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds b/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds new file mode 100644 index 0000000..364e35c --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds @@ -0,0 +1,77 @@ +/* + * (C) Copyright 2013 + * Henrik Nordstrom <henrik@henriknordstrom.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(s_init) +SECTIONS +{ + . = 0x00002000; + + . = ALIGN(4); + .text : + { + *(.text.s_init) + *(.text*) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { + *(.data*) + } + + . = ALIGN(4); + . = .; + + . = ALIGN(4); + .rel.dyn : { + __rel_dyn_start = .; + *(.rel*) + __rel_dyn_end = .; + } + + .dynsym : { + __dynsym_start = .; + *(.dynsym) + } + + . = ALIGN(4); + .note.gnu.build-id : + { + *(.note.gnu.build-id) + } + _end = .; + + . = ALIGN(4096); + .mmutable : { + *(.mmutable) + } + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + __bss_base = .; + } + + .bss __bss_base (OVERLAY) : { + *(.bss*) + . = ALIGN(4); + __bss_limit = .; + } + + .bss_end __bss_limit (OVERLAY) : { + KEEP(*(.__bss_end)); + } + + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } + /DISCARD/ : { *(.note*) } +} diff --git a/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds b/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds new file mode 100644 index 0000000..5008028 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds @@ -0,0 +1,52 @@ +/* + * (C) Copyright 2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * Based on omap-common/u-boot-spl.lds: + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Aneesh V <aneesh@ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ + LENGTH = CONFIG_SPL_MAX_SIZE } +MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ + LENGTH = CONFIG_SPL_BSS_MAX_SIZE } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + .text : + { + __start = .; + arch/arm/cpu/armv7/start.o (.text) + *(.text*) + } > .sram + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram + + . = ALIGN(4); + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + + . = ALIGN(4); + __image_copy_end = .; + _end = .; + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end = .; + } > .sdram +} diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S index 33d3f36..4b11aa4 100644 --- a/arch/arm/cpu/armv8/start.S +++ b/arch/arm/cpu/armv8/start.S @@ -50,10 +50,10 @@ reset: */ adr x0, vectors switch_el x1, 3f, 2f, 1f -3: mrs x0, scr_el3 +3: msr vbar_el3, x0 + mrs x0, scr_el3 orr x0, x0, #0xf /* SCR_EL3.NS|IRQ|FIQ|EA */ msr scr_el3, x0 - msr vbar_el3, x0 msr cptr_el3, xzr /* Enable FP/SIMD */ ldr x0, =COUNTER_FREQUENCY msr cntfrq_el0, x0 /* Initialize CNTFRQ */ diff --git a/arch/arm/cpu/at91-common/spl.c b/arch/arm/cpu/at91-common/spl.c index 7f4debb..cbb5a52 100644 --- a/arch/arm/cpu/at91-common/spl.c +++ b/arch/arm/cpu/at91-common/spl.c @@ -20,6 +20,43 @@ static void at91_disable_wdt(void) writel(AT91_WDT_MR_WDDIS, &wdt->mr); } +static void switch_to_main_crystal_osc(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 tmp; + + tmp = readl(&pmc->mor); + tmp &= ~AT91_PMC_MOR_OSCOUNT(0xff); + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_MOSCEN; + tmp |= AT91_PMC_MOR_OSCOUNT(8); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); + while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCS)) + ; + + tmp = readl(&pmc->mor); + tmp &= ~AT91_PMC_MOR_OSCBYPASS; + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); + + tmp = readl(&pmc->mor); + tmp |= AT91_PMC_MOR_MOSCSEL; + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); + + while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCSELS)) + ; + + tmp = readl(&pmc->mor); + tmp &= ~AT91_PMC_MOR_MOSCRCEN; + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); +} + void at91_plla_init(u32 pllar) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; @@ -76,6 +113,8 @@ u32 spl_boot_mode(void) void s_init(void) { + switch_to_main_crystal_osc(); + /* disable watchdog */ at91_disable_wdt(); diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h index 4535608..04f6239 100644 --- a/arch/arm/include/asm/arch-at91/at91_pmc.h +++ b/arch/arm/include/asm/arch-at91/at91_pmc.h @@ -70,7 +70,10 @@ typedef struct at91_pmc { #define AT91_PMC_MOR_MOSCEN 0x01 #define AT91_PMC_MOR_OSCBYPASS 0x02 +#define AT91_PMC_MOR_MOSCRCEN 0x08 #define AT91_PMC_MOR_OSCOUNT(x) ((x & 0xff) << 8) +#define AT91_PMC_MOR_KEY(x) ((x & 0xff) << 16) +#define AT91_PMC_MOR_MOSCSEL (1 << 24) #define AT91_PMC_PLLXR_DIV(x) (x & 0xFF) #define AT91_PMC_PLLXR_PLLCOUNT(x) ((x & 0x3F) << 8) @@ -142,6 +145,7 @@ typedef struct at91_pmc { #define AT91_PMC_IXR_PCKRDY1 0x00000200 #define AT91_PMC_IXR_PCKRDY2 0x00000400 #define AT91_PMC_IXR_PCKRDY3 0x00000800 +#define AT91_PMC_IXR_MOSCSELS 0x00010000 #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h index a471038..d49c184 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9x5.h +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h @@ -12,6 +12,9 @@ #ifndef __AT91SAM9X5_H__ #define __AT91SAM9X5_H__ +#define CONFIG_ARM926EJS /* ARM926EJS Core */ +#define CONFIG_AT91FAMILY /* it's a member of AT91 family */ + /* * Peripheral identifiers/interrupts. */ diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h index a63f974..d712a0d 100644 --- a/arch/arm/include/asm/arch-at91/hardware.h +++ b/arch/arm/include/asm/arch-at91/hardware.h @@ -25,8 +25,6 @@ # include <asm/arch/at91sam9x5.h> #elif defined(CONFIG_AT91CAP9) # include <asm/arch/at91cap9.h> -#elif defined(CONFIG_AT91X40) -# include <asm/arch/at91x40.h> #elif defined(CONFIG_SAMA5D3) # include <asm/arch/sama5d3.h> #else diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h new file mode 100644 index 0000000..5669f39 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -0,0 +1,29 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_CLOCK_H +#define _SUNXI_CLOCK_H + +#include <linux/types.h> + +#define CLK_GATE_OPEN 0x1 +#define CLK_GATE_CLOSE 0x0 + +/* clock control module regs definition */ +#include <asm/arch/clock_sun4i.h> + +#ifndef __ASSEMBLY__ +int clock_init(void); +int clock_twi_onoff(int port, int state); +void clock_set_pll1(unsigned int hz); +unsigned int clock_get_pll6(void); +void clock_init_safe(void); +void clock_init_uart(void); +#endif + +#endif /* _SUNXI_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h new file mode 100644 index 0000000..928f3f2 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h @@ -0,0 +1,256 @@ +/* + * sun4i, sun5i and sun7i clock register definitions + * + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_CLOCK_SUN4I_H +#define _SUNXI_CLOCK_SUN4I_H + +struct sunxi_ccm_reg { + u32 pll1_cfg; /* 0x00 pll1 control */ + u32 pll1_tun; /* 0x04 pll1 tuning */ + u32 pll2_cfg; /* 0x08 pll2 control */ + u32 pll2_tun; /* 0x0c pll2 tuning */ + u32 pll3_cfg; /* 0x10 pll3 control */ + u8 res0[0x4]; + u32 pll4_cfg; /* 0x18 pll4 control */ + u8 res1[0x4]; + u32 pll5_cfg; /* 0x20 pll5 control */ + u32 pll5_tun; /* 0x24 pll5 tuning */ + u32 pll6_cfg; /* 0x28 pll6 control */ + u32 pll6_tun; /* 0x2c pll6 tuning */ + u32 pll7_cfg; /* 0x30 pll7 control */ + u32 pll1_tun2; /* 0x34 pll5 tuning2 */ + u8 res2[0x4]; + u32 pll5_tun2; /* 0x3c pll5 tuning2 */ + u8 res3[0xc]; + u32 pll_lock_dbg; /* 0x4c pll lock time debug */ + u32 osc24m_cfg; /* 0x50 osc24m control */ + u32 cpu_ahb_apb0_cfg; /* 0x54 cpu,ahb and apb0 divide ratio */ + u32 apb1_clk_div_cfg; /* 0x58 apb1 clock dividor */ + u32 axi_gate; /* 0x5c axi module clock gating */ + u32 ahb_gate0; /* 0x60 ahb module clock gating 0 */ + u32 ahb_gate1; /* 0x64 ahb module clock gating 1 */ + u32 apb0_gate; /* 0x68 apb0 module clock gating */ + u32 apb1_gate; /* 0x6c apb1 module clock gating */ + u8 res4[0x10]; + u32 nand_sclk_cfg; /* 0x80 nand sub clock control */ + u32 ms_sclk_cfg; /* 0x84 memory stick sub clock control */ + u32 sd0_clk_cfg; /* 0x88 sd0 clock control */ + u32 sd1_clk_cfg; /* 0x8c sd1 clock control */ + u32 sd2_clk_cfg; /* 0x90 sd2 clock control */ + u32 sd3_clk_cfg; /* 0x94 sd3 clock control */ + u32 ts_clk_cfg; /* 0x98 transport stream clock control */ + u32 ss_clk_cfg; /* 0x9c */ + u32 spi0_clk_cfg; /* 0xa0 */ + u32 spi1_clk_cfg; /* 0xa4 */ + u32 spi2_clk_cfg; /* 0xa8 */ + u32 pata_clk_cfg; /* 0xac */ + u32 ir0_clk_cfg; /* 0xb0 */ + u32 ir1_clk_cfg; /* 0xb4 */ + u32 iis_clk_cfg; /* 0xb8 */ + u32 ac97_clk_cfg; /* 0xbc */ + u32 spdif_clk_cfg; /* 0xc0 */ + u32 keypad_clk_cfg; /* 0xc4 */ + u32 sata_clk_cfg; /* 0xc8 */ + u32 usb_clk_cfg; /* 0xcc */ + u32 gps_clk_cfg; /* 0xd0 */ + u32 spi3_clk_cfg; /* 0xd4 */ + u8 res5[0x28]; + u32 dram_clk_cfg; /* 0x100 */ + u32 be0_clk_cfg; /* 0x104 */ + u32 be1_clk_cfg; /* 0x108 */ + u32 fe0_clk_cfg; /* 0x10c */ + u32 fe1_clk_cfg; /* 0x110 */ + u32 mp_clk_cfg; /* 0x114 */ + u32 lcd0_ch0_clk_cfg; /* 0x118 */ + u32 lcd1_ch0_clk_cfg; /* 0x11c */ + u32 csi_isp_clk_cfg; /* 0x120 */ + u8 res6[0x4]; + u32 tvd_clk_reg; /* 0x128 */ + u32 lcd0_ch1_clk_cfg; /* 0x12c */ + u32 lcd1_ch1_clk_cfg; /* 0x130 */ + u32 csi0_clk_cfg; /* 0x134 */ + u32 csi1_clk_cfg; /* 0x138 */ + u32 ve_clk_cfg; /* 0x13c */ + u32 audio_codec_clk_cfg; /* 0x140 */ + u32 avs_clk_cfg; /* 0x144 */ + u32 ace_clk_cfg; /* 0x148 */ + u32 lvds_clk_cfg; /* 0x14c */ + u32 hdmi_clk_cfg; /* 0x150 */ + u32 mali_clk_cfg; /* 0x154 */ + u8 res7[0x4]; + u32 mbus_clk_cfg; /* 0x15c */ + u8 res8[0x4]; + u32 gmac_clk_cfg; /* 0x164 */ +}; + +/* apb1 bit field */ +#define APB1_CLK_SRC_OSC24M (0x0 << 24) +#define APB1_CLK_SRC_PLL6 (0x1 << 24) +#define APB1_CLK_SRC_LOSC (0x2 << 24) +#define APB1_CLK_SRC_MASK (0x3 << 24) +#define APB1_CLK_RATE_N_1 (0x0 << 16) +#define APB1_CLK_RATE_N_2 (0x1 << 16) +#define APB1_CLK_RATE_N_4 (0x2 << 16) +#define APB1_CLK_RATE_N_8 (0x3 << 16) +#define APB1_CLK_RATE_N_MASK (3 << 16) +#define APB1_CLK_RATE_M(m) (((m)-1) << 0) +#define APB1_CLK_RATE_M_MASK (0x1f << 0) + +/* apb1 gate field */ +#define APB1_GATE_UART_SHIFT (16) +#define APB1_GATE_UART_MASK (0xff << APB1_GATE_UART_SHIFT) +#define APB1_GATE_TWI_SHIFT (0) +#define APB1_GATE_TWI_MASK (0xf << APB1_GATE_TWI_SHIFT) + +/* clock divide */ +#define AXI_DIV_SHIFT (0) +#define AXI_DIV_1 0 +#define AXI_DIV_2 1 +#define AXI_DIV_3 2 +#define AXI_DIV_4 3 +#define AHB_DIV_SHIFT (4) +#define AHB_DIV_1 0 +#define AHB_DIV_2 1 +#define AHB_DIV_4 2 +#define AHB_DIV_8 3 +#define APB0_DIV_SHIFT (8) +#define APB0_DIV_1 0 +#define APB0_DIV_2 1 +#define APB0_DIV_4 2 +#define APB0_DIV_8 3 +#define CPU_CLK_SRC_SHIFT (16) +#define CPU_CLK_SRC_OSC24M 1 +#define CPU_CLK_SRC_PLL1 2 + +#define CCM_PLL1_CFG_ENABLE_SHIFT 31 +#define CCM_PLL1_CFG_VCO_RST_SHIFT 30 +#define CCM_PLL1_CFG_VCO_BIAS_SHIFT 26 +#define CCM_PLL1_CFG_PLL4_EXCH_SHIFT 25 +#define CCM_PLL1_CFG_BIAS_CUR_SHIFT 20 +#define CCM_PLL1_CFG_DIVP_SHIFT 16 +#define CCM_PLL1_CFG_LCK_TMR_SHIFT 13 +#define CCM_PLL1_CFG_FACTOR_N_SHIFT 8 +#define CCM_PLL1_CFG_FACTOR_K_SHIFT 4 +#define CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT 3 +#define CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT 2 +#define CCM_PLL1_CFG_FACTOR_M_SHIFT 0 + +#define PLL1_CFG_DEFAULT 0xa1005000 + +#define PLL6_CFG_DEFAULT 0xa1009911 + +/* nand clock */ +#define NAND_CLK_SRC_OSC24 0 +#define NAND_CLK_DIV_N 0 +#define NAND_CLK_DIV_M 0 + +/* gps clock */ +#define GPS_SCLK_GATING_OFF 0 +#define GPS_RESET 0 + +/* ahb clock gate bit offset */ +#define AHB_GATE_OFFSET_GPS 26 +#define AHB_GATE_OFFSET_SATA 25 +#define AHB_GATE_OFFSET_PATA 24 +#define AHB_GATE_OFFSET_SPI3 23 +#define AHB_GATE_OFFSET_SPI2 22 +#define AHB_GATE_OFFSET_SPI1 21 +#define AHB_GATE_OFFSET_SPI0 20 +#define AHB_GATE_OFFSET_TS0 18 +#define AHB_GATE_OFFSET_EMAC 17 +#define AHB_GATE_OFFSET_ACE 16 +#define AHB_GATE_OFFSET_DLL 15 +#define AHB_GATE_OFFSET_SDRAM 14 +#define AHB_GATE_OFFSET_NAND 13 +#define AHB_GATE_OFFSET_MS 12 +#define AHB_GATE_OFFSET_MMC3 11 +#define AHB_GATE_OFFSET_MMC2 10 +#define AHB_GATE_OFFSET_MMC1 9 +#define AHB_GATE_OFFSET_MMC0 8 +#define AHB_GATE_OFFSET_MMC(n) (AHB_GATE_OFFSET_MMC0 + (n)) +#define AHB_GATE_OFFSET_BIST 7 +#define AHB_GATE_OFFSET_DMA 6 +#define AHB_GATE_OFFSET_SS 5 +#define AHB_GATE_OFFSET_USB_OHCI1 4 +#define AHB_GATE_OFFSET_USB_EHCI1 3 +#define AHB_GATE_OFFSET_USB_OHCI0 2 +#define AHB_GATE_OFFSET_USB_EHCI0 1 +#define AHB_GATE_OFFSET_USB 0 + +/* ahb clock gate bit offset (second register) */ +#define AHB_GATE_OFFSET_GMAC 17 + +#define CCM_AHB_GATE_GPS (0x1 << 26) +#define CCM_AHB_GATE_SDRAM (0x1 << 14) +#define CCM_AHB_GATE_DLL (0x1 << 15) +#define CCM_AHB_GATE_ACE (0x1 << 16) + +#define CCM_PLL5_CTRL_M(n) (((n) & 0x3) << 0) +#define CCM_PLL5_CTRL_M_MASK CCM_PLL5_CTRL_M(0x3) +#define CCM_PLL5_CTRL_M_X(n) ((n) - 1) +#define CCM_PLL5_CTRL_M1(n) (((n) & 0x3) << 2) +#define CCM_PLL5_CTRL_M1_MASK CCM_PLL5_CTRL_M1(0x3) +#define CCM_PLL5_CTRL_M1_X(n) ((n) - 1) +#define CCM_PLL5_CTRL_K(n) (((n) & 0x3) << 4) +#define CCM_PLL5_CTRL_K_MASK CCM_PLL5_CTRL_K(0x3) +#define CCM_PLL5_CTRL_K_X(n) ((n) - 1) +#define CCM_PLL5_CTRL_LDO (0x1 << 7) +#define CCM_PLL5_CTRL_N(n) (((n) & 0x1f) << 8) +#define CCM_PLL5_CTRL_N_MASK CCM_PLL5_CTRL_N(0x1f) +#define CCM_PLL5_CTRL_N_X(n) (n) +#define CCM_PLL5_CTRL_P(n) (((n) & 0x3) << 16) +#define CCM_PLL5_CTRL_P_MASK CCM_PLL5_CTRL_P(0x3) +#define CCM_PLL5_CTRL_P_X(n) ((n) - 1) +#define CCM_PLL5_CTRL_BW (0x1 << 18) +#define CCM_PLL5_CTRL_VCO_GAIN (0x1 << 19) +#define CCM_PLL5_CTRL_BIAS(n) (((n) & 0x1f) << 20) +#define CCM_PLL5_CTRL_BIAS_MASK CCM_PLL5_CTRL_BIAS(0x1f) +#define CCM_PLL5_CTRL_BIAS_X(n) ((n) - 1) +#define CCM_PLL5_CTRL_VCO_BIAS (0x1 << 25) +#define CCM_PLL5_CTRL_DDR_CLK (0x1 << 29) +#define CCM_PLL5_CTRL_BYPASS (0x1 << 30) +#define CCM_PLL5_CTRL_EN (0x1 << 31) + +#define CCM_PLL6_CTRL_N_SHIFT 8 +#define CCM_PLL6_CTRL_N_MASK (0x1f << CCM_PLL6_CTRL_N_SHIFT) +#define CCM_PLL6_CTRL_K_SHIFT 4 +#define CCM_PLL6_CTRL_K_MASK (0x3 << CCM_PLL6_CTRL_K_SHIFT) + +#define CCM_GPS_CTRL_RESET (0x1 << 0) +#define CCM_GPS_CTRL_GATE (0x1 << 1) + +#define CCM_DRAM_CTRL_DCLK_OUT (0x1 << 15) + +#define CCM_MBUS_CTRL_M(n) (((n) & 0xf) << 0) +#define CCM_MBUS_CTRL_M_MASK CCM_MBUS_CTRL_M(0xf) +#define CCM_MBUS_CTRL_M_X(n) ((n) - 1) +#define CCM_MBUS_CTRL_N(n) (((n) & 0xf) << 16) +#define CCM_MBUS_CTRL_N_MASK CCM_MBUS_CTRL_N(0xf) +#define CCM_MBUS_CTRL_N_X(n) (((n) >> 3) ? 3 : (((n) >> 2) ? 2 : (((n) >> 1) ? 1 : 0))) +#define CCM_MBUS_CTRL_CLK_SRC(n) (((n) & 0x3) << 24) +#define CCM_MBUS_CTRL_CLK_SRC_MASK CCM_MBUS_CTRL_CLK_SRC(0x3) +#define CCM_MBUS_CTRL_CLK_SRC_HOSC 0x0 +#define CCM_MBUS_CTRL_CLK_SRC_PLL6 0x1 +#define CCM_MBUS_CTRL_CLK_SRC_PLL5 0x2 +#define CCM_MBUS_CTRL_GATE (0x1 << 31) + +#define CCM_MMC_CTRL_OSCM24 (0x0 << 24) +#define CCM_MMC_CTRL_PLL6 (0x1 << 24) +#define CCM_MMC_CTRL_PLL5 (0x2 << 24) + +#define CCM_MMC_CTRL_ENABLE (0x1 << 31) + +#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0 +#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1 +#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2 +#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2) +#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2) + +#endif /* _SUNXI_CLOCK_SUN4I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h new file mode 100644 index 0000000..a987e51d --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/cpu.h @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_CPU_H +#define _SUNXI_CPU_H + +#define SUNXI_SRAM_A1_BASE 0x00000000 +#define SUNXI_SRAM_A1_SIZE (16 * 1024) /* 16 kiB */ + +#define SUNXI_SRAM_A2_BASE 0x00004000 /* 16 kiB */ +#define SUNXI_SRAM_A3_BASE 0x00008000 /* 13 kiB */ +#define SUNXI_SRAM_A4_BASE 0x0000b400 /* 3 kiB */ +#define SUNXI_SRAM_D_BASE 0x00010000 /* 4 kiB */ +#define SUNXI_SRAM_B_BASE 0x00020000 /* 64 kiB (secure) */ + +#define SUNXI_SRAMC_BASE 0x01c00000 +#define SUNXI_DRAMC_BASE 0x01c01000 +#define SUNXI_DMA_BASE 0x01c02000 +#define SUNXI_NFC_BASE 0x01c03000 +#define SUNXI_TS_BASE 0x01c04000 +#define SUNXI_SPI0_BASE 0x01c05000 +#define SUNXI_SPI1_BASE 0x01c06000 +#define SUNXI_MS_BASE 0x01c07000 +#define SUNXI_TVD_BASE 0x01c08000 +#define SUNXI_CSI0_BASE 0x01c09000 +#define SUNXI_TVE0_BASE 0x01c0a000 +#define SUNXI_EMAC_BASE 0x01c0b000 +#define SUNXI_LCD0_BASE 0x01c0C000 +#define SUNXI_LCD1_BASE 0x01c0d000 +#define SUNXI_VE_BASE 0x01c0e000 +#define SUNXI_MMC0_BASE 0x01c0f000 +#define SUNXI_MMC1_BASE 0x01c10000 +#define SUNXI_MMC2_BASE 0x01c11000 +#define SUNXI_MMC3_BASE 0x01c12000 +#define SUNXI_USB0_BASE 0x01c13000 +#define SUNXI_USB1_BASE 0x01c14000 +#define SUNXI_SS_BASE 0x01c15000 +#define SUNXI_HDMI_BASE 0x01c16000 +#define SUNXI_SPI2_BASE 0x01c17000 +#define SUNXI_SATA_BASE 0x01c18000 +#define SUNXI_PATA_BASE 0x01c19000 +#define SUNXI_ACE_BASE 0x01c1a000 +#define SUNXI_TVE1_BASE 0x01c1b000 +#define SUNXI_USB2_BASE 0x01c1c000 +#define SUNXI_CSI1_BASE 0x01c1d000 +#define SUNXI_TZASC_BASE 0x01c1e000 +#define SUNXI_SPI3_BASE 0x01c1f000 + +#define SUNXI_CCM_BASE 0x01c20000 +#define SUNXI_INTC_BASE 0x01c20400 +#define SUNXI_PIO_BASE 0x01c20800 +#define SUNXI_TIMER_BASE 0x01c20c00 +#define SUNXI_SPDIF_BASE 0x01c21000 +#define SUNXI_AC97_BASE 0x01c21400 +#define SUNXI_IR0_BASE 0x01c21800 +#define SUNXI_IR1_BASE 0x01c21c00 + +#define SUNXI_IIS_BASE 0x01c22400 +#define SUNXI_LRADC_BASE 0x01c22800 +#define SUNXI_AD_DA_BASE 0x01c22c00 +#define SUNXI_KEYPAD_BASE 0x01c23000 +#define SUNXI_TZPC_BASE 0x01c23400 +#define SUNXI_SID_BASE 0x01c23800 +#define SUNXI_SJTAG_BASE 0x01c23c00 + +#define SUNXI_TP_BASE 0x01c25000 +#define SUNXI_PMU_BASE 0x01c25400 +#define SUNXI_CPUCFG_BASE 0x01c25c00 + +#define SUNXI_UART0_BASE 0x01c28000 +#define SUNXI_UART1_BASE 0x01c28400 +#define SUNXI_UART2_BASE 0x01c28800 +#define SUNXI_UART3_BASE 0x01c28c00 +#define SUNXI_UART4_BASE 0x01c29000 +#define SUNXI_UART5_BASE 0x01c29400 +#define SUNXI_UART6_BASE 0x01c29800 +#define SUNXI_UART7_BASE 0x01c29c00 +#define SUNXI_PS2_0_BASE 0x01c2a000 +#define SUNXI_PS2_1_BASE 0x01c2a400 + +#define SUNXI_TWI0_BASE 0x01c2ac00 +#define SUNXI_TWI1_BASE 0x01c2b000 +#define SUNXI_TWI2_BASE 0x01c2b400 + +#define SUNXI_CAN_BASE 0x01c2bc00 + +#define SUNXI_SCR_BASE 0x01c2c400 + +#define SUNXI_GPS_BASE 0x01c30000 +#define SUNXI_MALI400_BASE 0x01c40000 +#define SUNXI_GMAC_BASE 0x01c50000 + +/* module sram */ +#define SUNXI_SRAM_C_BASE 0x01d00000 + +#define SUNXI_DE_FE0_BASE 0x01e00000 +#define SUNXI_DE_FE1_BASE 0x01e20000 +#define SUNXI_DE_BE0_BASE 0x01e60000 +#define SUNXI_DE_BE1_BASE 0x01e40000 +#define SUNXI_MP_BASE 0x01e80000 +#define SUNXI_AVG_BASE 0x01ea0000 + +/* CoreSight Debug Module */ +#define SUNXI_CSDM_BASE 0x3f500000 + +#define SUNXI_DDRII_DDRIII_BASE 0x40000000 /* 2 GiB */ + +#define SUNXI_BROM_BASE 0xffff0000 /* 32 kiB */ + +#define SUNXI_CPU_CFG (SUNXI_TIMER_BASE + 0x13c) + +#ifndef __ASSEMBLY__ +void sunxi_board_init(void); +void sunxi_reset(void); +#endif /* __ASSEMBLY__ */ + +#endif /* _CPU_H */ diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h new file mode 100644 index 0000000..67fbfad --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/dram.h @@ -0,0 +1,179 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Berg Xing <bergxing@allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * Sunxi platform dram register definition. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_DRAM_H +#define _SUNXI_DRAM_H + +#include <linux/types.h> + +struct sunxi_dram_reg { + u32 ccr; /* 0x00 controller configuration register */ + u32 dcr; /* 0x04 dram configuration register */ + u32 iocr; /* 0x08 i/o configuration register */ + u32 csr; /* 0x0c controller status register */ + u32 drr; /* 0x10 dram refresh register */ + u32 tpr0; /* 0x14 dram timing parameters register 0 */ + u32 tpr1; /* 0x18 dram timing parameters register 1 */ + u32 tpr2; /* 0x1c dram timing parameters register 2 */ + u32 gdllcr; /* 0x20 global dll control register */ + u8 res0[0x28]; + u32 rslr0; /* 0x4c rank system latency register */ + u32 rslr1; /* 0x50 rank system latency register */ + u8 res1[0x8]; + u32 rdgr0; /* 0x5c rank dqs gating register */ + u32 rdgr1; /* 0x60 rank dqs gating register */ + u8 res2[0x34]; + u32 odtcr; /* 0x98 odt configuration register */ + u32 dtr0; /* 0x9c data training register 0 */ + u32 dtr1; /* 0xa0 data training register 1 */ + u32 dtar; /* 0xa4 data training address register */ + u32 zqcr0; /* 0xa8 zq control register 0 */ + u32 zqcr1; /* 0xac zq control register 1 */ + u32 zqsr; /* 0xb0 zq status register */ + u32 idcr; /* 0xb4 initializaton delay configure reg */ + u8 res3[0x138]; + u32 mr; /* 0x1f0 mode register */ + u32 emr; /* 0x1f4 extended mode register */ + u32 emr2; /* 0x1f8 extended mode register */ + u32 emr3; /* 0x1fc extended mode register */ + u32 dllctr; /* 0x200 dll control register */ + u32 dllcr[5]; /* 0x204 dll control register 0(byte 0) */ + /* 0x208 dll control register 1(byte 1) */ + /* 0x20c dll control register 2(byte 2) */ + /* 0x210 dll control register 3(byte 3) */ + /* 0x214 dll control register 4(byte 4) */ + u32 dqtr0; /* 0x218 dq timing register */ + u32 dqtr1; /* 0x21c dq timing register */ + u32 dqtr2; /* 0x220 dq timing register */ + u32 dqtr3; /* 0x224 dq timing register */ + u32 dqstr; /* 0x228 dqs timing register */ + u32 dqsbtr; /* 0x22c dqsb timing register */ + u32 mcr; /* 0x230 mode configure register */ + u8 res[0x8]; + u32 ppwrsctl; /* 0x23c pad power save control */ + u32 apr; /* 0x240 arbiter period register */ + u32 pldtr; /* 0x244 priority level data threshold reg */ + u8 res5[0x8]; + u32 hpcr[32]; /* 0x250 host port configure register */ + u8 res6[0x10]; + u32 csel; /* 0x2e0 controller select register */ +}; + +struct dram_para { + u32 clock; + u32 type; + u32 rank_num; + u32 density; + u32 io_width; + u32 bus_width; + u32 cas; + u32 zq; + u32 odt_en; + u32 size; + u32 tpr0; + u32 tpr1; + u32 tpr2; + u32 tpr3; + u32 tpr4; + u32 tpr5; + u32 emr1; + u32 emr2; + u32 emr3; +}; + +#define DRAM_CCR_COMMAND_RATE_1T (0x1 << 5) +#define DRAM_CCR_DQS_GATE (0x1 << 14) +#define DRAM_CCR_DQS_DRIFT_COMP (0x1 << 17) +#define DRAM_CCR_ITM_OFF (0x1 << 28) +#define DRAM_CCR_DATA_TRAINING (0x1 << 30) +#define DRAM_CCR_INIT (0x1 << 31) + +#define DRAM_MEMORY_TYPE_DDR1 1 +#define DRAM_MEMORY_TYPE_DDR2 2 +#define DRAM_MEMORY_TYPE_DDR3 3 +#define DRAM_MEMORY_TYPE_LPDDR2 4 +#define DRAM_MEMORY_TYPE_LPDDR 5 +#define DRAM_DCR_TYPE (0x1 << 0) +#define DRAM_DCR_TYPE_DDR2 0x0 +#define DRAM_DCR_TYPE_DDR3 0x1 +#define DRAM_DCR_IO_WIDTH(n) (((n) & 0x3) << 1) +#define DRAM_DCR_IO_WIDTH_MASK DRAM_DCR_IO_WIDTH(0x3) +#define DRAM_DCR_IO_WIDTH_8BIT 0x0 +#define DRAM_DCR_IO_WIDTH_16BIT 0x1 +#define DRAM_DCR_CHIP_DENSITY(n) (((n) & 0x7) << 3) +#define DRAM_DCR_CHIP_DENSITY_MASK DRAM_DCR_CHIP_DENSITY(0x7) +#define DRAM_DCR_CHIP_DENSITY_256M 0x0 +#define DRAM_DCR_CHIP_DENSITY_512M 0x1 +#define DRAM_DCR_CHIP_DENSITY_1024M 0x2 +#define DRAM_DCR_CHIP_DENSITY_2048M 0x3 +#define DRAM_DCR_CHIP_DENSITY_4096M 0x4 +#define DRAM_DCR_CHIP_DENSITY_8192M 0x5 +#define DRAM_DCR_BUS_WIDTH(n) (((n) & 0x7) << 6) +#define DRAM_DCR_BUS_WIDTH_MASK DRAM_DCR_BUS_WIDTH(0x7) +#define DRAM_DCR_BUS_WIDTH_32BIT 0x3 +#define DRAM_DCR_BUS_WIDTH_16BIT 0x1 +#define DRAM_DCR_BUS_WIDTH_8BIT 0x0 +#define DRAM_DCR_NR_DLLCR_32BIT 5 +#define DRAM_DCR_NR_DLLCR_16BIT 3 +#define DRAM_DCR_NR_DLLCR_8BIT 2 +#define DRAM_DCR_RANK_SEL(n) (((n) & 0x3) << 10) +#define DRAM_DCR_RANK_SEL_MASK DRAM_DCR_CMD_RANK(0x3) +#define DRAM_DCR_CMD_RANK_ALL (0x1 << 12) +#define DRAM_DCR_MODE(n) (((n) & 0x3) << 13) +#define DRAM_DCR_MODE_MASK DRAM_DCR_MODE(0x3) +#define DRAM_DCR_MODE_SEQ 0x0 +#define DRAM_DCR_MODE_INTERLEAVE 0x1 + +#define DRAM_CSR_FAILED (0x1 << 20) + +#define DRAM_DRR_TRFC(n) ((n) & 0xff) +#define DRAM_DRR_TREFI(n) (((n) & 0xffff) << 8) +#define DRAM_DRR_BURST(n) ((((n) - 1) & 0xf) << 24) + +#define DRAM_MCR_MODE_NORM(n) (((n) & 0x3) << 0) +#define DRAM_MCR_MODE_NORM_MASK DRAM_MCR_MOD_NORM(0x3) +#define DRAM_MCR_MODE_DQ_OUT(n) (((n) & 0x3) << 2) +#define DRAM_MCR_MODE_DQ_OUT_MASK DRAM_MCR_MODE_DQ_OUT(0x3) +#define DRAM_MCR_MODE_ADDR_OUT(n) (((n) & 0x3) << 4) +#define DRAM_MCR_MODE_ADDR_OUT_MASK DRAM_MCR_MODE_ADDR_OUT(0x3) +#define DRAM_MCR_MODE_DQ_IN_OUT(n) (((n) & 0x3) << 6) +#define DRAM_MCR_MODE_DQ_IN_OUT_MASK DRAM_MCR_MODE_DQ_IN_OUT(0x3) +#define DRAM_MCR_MODE_DQ_TURNON_DELAY(n) (((n) & 0x7) << 8) +#define DRAM_MCR_MODE_DQ_TURNON_DELAY_MASK DRAM_MCR_MODE_DQ_TURNON_DELAY(0x7) +#define DRAM_MCR_MODE_ADDR_IN (0x1 << 11) +#define DRAM_MCR_RESET (0x1 << 12) +#define DRAM_MCR_MODE_EN(n) (((n) & 0x3) << 13) +#define DRAM_MCR_MODE_EN_MASK DRAM_MCR_MOD_EN(0x3) +#define DRAM_MCR_DCLK_OUT (0x1 << 16) + +#define DRAM_DLLCR_NRESET (0x1 << 30) +#define DRAM_DLLCR_DISABLE (0x1 << 31) + +#define DRAM_ZQCR0_IMP_DIV(n) (((n) & 0xff) << 20) +#define DRAM_ZQCR0_IMP_DIV_MASK DRAM_ZQCR0_IMP_DIV(0xff) + +#define DRAM_IOCR_ODT_EN(n) ((((n) & 0x3) << 30) | ((n) & 0x3) << 0) +#define DRAM_IOCR_ODT_EN_MASK DRAM_IOCR_ODT_EN(0x3) + +#define DRAM_MR_BURST_LENGTH(n) (((n) & 0x7) << 0) +#define DRAM_MR_BURST_LENGTH_MASK DRAM_MR_BURST_LENGTH(0x7) +#define DRAM_MR_CAS_LAT(n) (((n) & 0x7) << 4) +#define DRAM_MR_CAS_LAT_MASK DRAM_MR_CAS_LAT(0x7) +#define DRAM_MR_WRITE_RECOVERY(n) (((n) & 0x7) << 9) +#define DRAM_MR_WRITE_RECOVERY_MASK DRAM_MR_WRITE_RECOVERY(0x7) +#define DRAM_MR_POWER_DOWN (0x1 << 12) + +#define DRAM_CSEL_MAGIC 0x16237495 + +unsigned long sunxi_dram_init(void); +unsigned long dramc_init(struct dram_para *para); + +#endif /* _SUNXI_DRAM_H */ diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h new file mode 100644 index 0000000..892479c --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -0,0 +1,147 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_GPIO_H +#define _SUNXI_GPIO_H + +#include <linux/types.h> + +/* + * sunxi has 9 banks of gpio, they are: + * PA0 - PA17 | PB0 - PB23 | PC0 - PC24 + * PD0 - PD27 | PE0 - PE31 | PF0 - PF5 + * PG0 - PG9 | PH0 - PH27 | PI0 - PI12 + */ + +#define SUNXI_GPIO_A 0 +#define SUNXI_GPIO_B 1 +#define SUNXI_GPIO_C 2 +#define SUNXI_GPIO_D 3 +#define SUNXI_GPIO_E 4 +#define SUNXI_GPIO_F 5 +#define SUNXI_GPIO_G 6 +#define SUNXI_GPIO_H 7 +#define SUNXI_GPIO_I 8 +#define SUNXI_GPIO_BANKS 9 + +struct sunxi_gpio { + u32 cfg[4]; + u32 dat; + u32 drv[2]; + u32 pull[2]; +}; + +/* gpio interrupt control */ +struct sunxi_gpio_int { + u32 cfg[3]; + u32 ctl; + u32 sta; + u32 deb; /* interrupt debounce */ +}; + +struct sunxi_gpio_reg { + struct sunxi_gpio gpio_bank[SUNXI_GPIO_BANKS]; + u8 res[0xbc]; + struct sunxi_gpio_int gpio_int; +}; + +#define BANK_TO_GPIO(bank) \ + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] + +#define GPIO_BANK(pin) ((pin) >> 5) +#define GPIO_NUM(pin) ((pin) & 0x1f) + +#define GPIO_CFG_INDEX(pin) (((pin) & 0x1f) >> 3) +#define GPIO_CFG_OFFSET(pin) ((((pin) & 0x1f) & 0x7) << 2) + +#define GPIO_DRV_INDEX(pin) (((pin) & 0x1f) >> 4) +#define GPIO_DRV_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1) + +#define GPIO_PULL_INDEX(pin) (((pin) & 0x1f) >> 4) +#define GPIO_PULL_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1) + +/* GPIO bank sizes */ +#define SUNXI_GPIO_A_NR 32 +#define SUNXI_GPIO_B_NR 32 +#define SUNXI_GPIO_C_NR 32 +#define SUNXI_GPIO_D_NR 32 +#define SUNXI_GPIO_E_NR 32 +#define SUNXI_GPIO_F_NR 32 +#define SUNXI_GPIO_G_NR 32 +#define SUNXI_GPIO_H_NR 32 +#define SUNXI_GPIO_I_NR 32 + +#define SUNXI_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + 0) + +enum sunxi_gpio_number { + SUNXI_GPIO_A_START = 0, + SUNXI_GPIO_B_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_A), + SUNXI_GPIO_C_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_B), + SUNXI_GPIO_D_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_C), + SUNXI_GPIO_E_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_D), + SUNXI_GPIO_F_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_E), + SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F), + SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G), + SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H), +}; + +/* SUNXI GPIO number definitions */ +#define SUNXI_GPA(_nr) (SUNXI_GPIO_A_START + (_nr)) +#define SUNXI_GPB(_nr) (SUNXI_GPIO_B_START + (_nr)) +#define SUNXI_GPC(_nr) (SUNXI_GPIO_C_START + (_nr)) +#define SUNXI_GPD(_nr) (SUNXI_GPIO_D_START + (_nr)) +#define SUNXI_GPE(_nr) (SUNXI_GPIO_E_START + (_nr)) +#define SUNXI_GPF(_nr) (SUNXI_GPIO_F_START + (_nr)) +#define SUNXI_GPG(_nr) (SUNXI_GPIO_G_START + (_nr)) +#define SUNXI_GPH(_nr) (SUNXI_GPIO_H_START + (_nr)) +#define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr)) + +/* GPIO pin function config */ +#define SUNXI_GPIO_INPUT 0 +#define SUNXI_GPIO_OUTPUT 1 + +#define SUNXI_GPA0_EMAC 2 +#define SUN7I_GPA0_GMAC 5 + +#define SUNXI_GPB0_TWI0 2 + +#define SUN4I_GPB22_UART0_TX 2 +#define SUN4I_GPB23_UART0_RX 2 + +#define SUN5I_GPB19_UART0_TX 2 +#define SUN5I_GPB20_UART0_RX 2 + +#define SUN5I_GPG3_UART1_TX 4 +#define SUN5I_GPG4_UART1_RX 4 + +#define SUNXI_GPC6_SDC2 3 + +#define SUNXI_GPF0_SDC0 2 + +#define SUNXI_GPF2_SDC0 2 +#define SUNXI_GPF2_UART0_TX 4 +#define SUNXI_GPF4_UART0_RX 4 + +#define SUN4I_GPG0_SDC1 4 + +#define SUN4I_GPH22_SDC1 5 + +#define SUN4I_GPI4_SDC3 2 + +/* GPIO pin pull-up/down config */ +#define SUNXI_GPIO_PULL_DISABLE 0 +#define SUNXI_GPIO_PULL_UP 1 +#define SUNXI_GPIO_PULL_DOWN 2 + +int sunxi_gpio_set_cfgpin(u32 pin, u32 val); +int sunxi_gpio_get_cfgpin(u32 pin); +int sunxi_gpio_set_drv(u32 pin, u32 val); +int sunxi_gpio_set_pull(u32 pin, u32 val); + +#endif /* _SUNXI_GPIO_H */ diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h new file mode 100644 index 0000000..53196e3 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/mmc.h @@ -0,0 +1,124 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Aaron <leafy.myeh@allwinnertech.com> + * + * MMC register definition for allwinner sunxi platform. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_MMC_H +#define _SUNXI_MMC_H + +#include <linux/types.h> + +struct sunxi_mmc { + u32 gctrl; /* 0x00 global control */ + u32 clkcr; /* 0x04 clock control */ + u32 timeout; /* 0x08 time out */ + u32 width; /* 0x0c bus width */ + u32 blksz; /* 0x10 block size */ + u32 bytecnt; /* 0x14 byte count */ + u32 cmd; /* 0x18 command */ + u32 arg; /* 0x1c argument */ + u32 resp0; /* 0x20 response 0 */ + u32 resp1; /* 0x24 response 1 */ + u32 resp2; /* 0x28 response 2 */ + u32 resp3; /* 0x2c response 3 */ + u32 imask; /* 0x30 interrupt mask */ + u32 mint; /* 0x34 masked interrupt status */ + u32 rint; /* 0x38 raw interrupt status */ + u32 status; /* 0x3c status */ + u32 ftrglevel; /* 0x40 FIFO threshold watermark*/ + u32 funcsel; /* 0x44 function select */ + u32 cbcr; /* 0x48 CIU byte count */ + u32 bbcr; /* 0x4c BIU byte count */ + u32 dbgc; /* 0x50 debug enable */ + u32 res0[11]; + u32 dmac; /* 0x80 internal DMA control */ + u32 dlba; /* 0x84 internal DMA descr list base address */ + u32 idst; /* 0x88 internal DMA status */ + u32 idie; /* 0x8c internal DMA interrupt enable */ + u32 chda; /* 0x90 */ + u32 cbda; /* 0x94 */ + u32 res1[26]; + u32 fifo; /* 0x100 FIFO access address */ +}; + +#define SUNXI_MMC_CLK_POWERSAVE (0x1 << 17) +#define SUNXI_MMC_CLK_ENABLE (0x1 << 16) +#define SUNXI_MMC_CLK_DIVIDER_MASK (0xff) + +#define SUNXI_MMC_GCTRL_SOFT_RESET (0x1 << 0) +#define SUNXI_MMC_GCTRL_FIFO_RESET (0x1 << 1) +#define SUNXI_MMC_GCTRL_DMA_RESET (0x1 << 2) +#define SUNXI_MMC_GCTRL_RESET (SUNXI_MMC_GCTRL_SOFT_RESET|\ + SUNXI_MMC_GCTRL_FIFO_RESET|\ + SUNXI_MMC_GCTRL_DMA_RESET) +#define SUNXI_MMC_GCTRL_DMA_ENABLE (0x1 << 5) +#define SUNXI_MMC_GCTRL_ACCESS_BY_AHB (0x1 << 31) + +#define SUNXI_MMC_CMD_RESP_EXPIRE (0x1 << 6) +#define SUNXI_MMC_CMD_LONG_RESPONSE (0x1 << 7) +#define SUNXI_MMC_CMD_CHK_RESPONSE_CRC (0x1 << 8) +#define SUNXI_MMC_CMD_DATA_EXPIRE (0x1 << 9) +#define SUNXI_MMC_CMD_WRITE (0x1 << 10) +#define SUNXI_MMC_CMD_AUTO_STOP (0x1 << 12) +#define SUNXI_MMC_CMD_WAIT_PRE_OVER (0x1 << 13) +#define SUNXI_MMC_CMD_SEND_INIT_SEQ (0x1 << 15) +#define SUNXI_MMC_CMD_UPCLK_ONLY (0x1 << 21) +#define SUNXI_MMC_CMD_START (0x1 << 31) + +#define SUNXI_MMC_RINT_RESP_ERROR (0x1 << 1) +#define SUNXI_MMC_RINT_COMMAND_DONE (0x1 << 2) +#define SUNXI_MMC_RINT_DATA_OVER (0x1 << 3) +#define SUNXI_MMC_RINT_TX_DATA_REQUEST (0x1 << 4) +#define SUNXI_MMC_RINT_RX_DATA_REQUEST (0x1 << 5) +#define SUNXI_MMC_RINT_RESP_CRC_ERROR (0x1 << 6) +#define SUNXI_MMC_RINT_DATA_CRC_ERROR (0x1 << 7) +#define SUNXI_MMC_RINT_RESP_TIMEOUT (0x1 << 8) +#define SUNXI_MMC_RINT_DATA_TIMEOUT (0x1 << 9) +#define SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE (0x1 << 10) +#define SUNXI_MMC_RINT_FIFO_RUN_ERROR (0x1 << 11) +#define SUNXI_MMC_RINT_HARD_WARE_LOCKED (0x1 << 12) +#define SUNXI_MMC_RINT_START_BIT_ERROR (0x1 << 13) +#define SUNXI_MMC_RINT_AUTO_COMMAND_DONE (0x1 << 14) +#define SUNXI_MMC_RINT_END_BIT_ERROR (0x1 << 15) +#define SUNXI_MMC_RINT_SDIO_INTERRUPT (0x1 << 16) +#define SUNXI_MMC_RINT_CARD_INSERT (0x1 << 30) +#define SUNXI_MMC_RINT_CARD_REMOVE (0x1 << 31) +#define SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT \ + (SUNXI_MMC_RINT_RESP_ERROR | \ + SUNXI_MMC_RINT_RESP_CRC_ERROR | \ + SUNXI_MMC_RINT_DATA_CRC_ERROR | \ + SUNXI_MMC_RINT_RESP_TIMEOUT | \ + SUNXI_MMC_RINT_DATA_TIMEOUT | \ + SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE | \ + SUNXI_MMC_RINT_FIFO_RUN_ERROR | \ + SUNXI_MMC_RINT_HARD_WARE_LOCKED | \ + SUNXI_MMC_RINT_START_BIT_ERROR | \ + SUNXI_MMC_RINT_END_BIT_ERROR) /* 0xbfc2 */ +#define SUNXI_MMC_RINT_INTERRUPT_DONE_BIT \ + (SUNXI_MMC_RINT_AUTO_COMMAND_DONE | \ + SUNXI_MMC_RINT_DATA_OVER | \ + SUNXI_MMC_RINT_COMMAND_DONE | \ + SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE) + +#define SUNXI_MMC_STATUS_RXWL_FLAG (0x1 << 0) +#define SUNXI_MMC_STATUS_TXWL_FLAG (0x1 << 1) +#define SUNXI_MMC_STATUS_FIFO_EMPTY (0x1 << 2) +#define SUNXI_MMC_STATUS_FIFO_FULL (0x1 << 3) +#define SUNXI_MMC_STATUS_CARD_PRESENT (0x1 << 8) +#define SUNXI_MMC_STATUS_CARD_DATA_BUSY (0x1 << 9) +#define SUNXI_MMC_STATUS_DATA_FSM_BUSY (0x1 << 10) + +#define SUNXI_MMC_IDMAC_RESET (0x1 << 0) +#define SUNXI_MMC_IDMAC_FIXBURST (0x1 << 1) +#define SUNXI_MMC_IDMAC_ENABLE (0x1 << 7) + +#define SUNXI_MMC_IDIE_TXIRQ (0x1 << 0) +#define SUNXI_MMC_IDIE_RXIRQ (0x1 << 1) + +int sunxi_mmc_init(int sdc_no); +#endif /* _SUNXI_MMC_H */ diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h new file mode 100644 index 0000000..ff871bc --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/spl.h @@ -0,0 +1,20 @@ +/* + * This is a copy of omap3/spl.h: + * + * (C) Copyright 2012 + * Texas Instruments, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _ASM_ARCH_SPL_H_ +#define _ASM_SPL_H_ + +#define BOOT_DEVICE_NONE 0 +#define BOOT_DEVICE_XIP 1 +#define BOOT_DEVICE_NAND 2 +#define BOOT_DEVICE_ONE_NAND 3 +#define BOOT_DEVICE_MMC2 5 /*emmc*/ +#define BOOT_DEVICE_MMC1 6 +#define BOOT_DEVICE_XIPWAIT 7 +#define BOOT_DEVICE_MMC2_2 0xff +#endif diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h new file mode 100644 index 0000000..c3e636e --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h @@ -0,0 +1,16 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +#include <linux/types.h> + +void sdelay(unsigned long); + +#endif diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h new file mode 100644 index 0000000..6aacfd7 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/timer.h @@ -0,0 +1,88 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * Configuration settings for the Allwinner A10-evb board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_TIMER_H_ +#define _SUNXI_TIMER_H_ + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> + +/* General purpose timer */ +struct sunxi_timer { + u32 ctl; + u32 inter; + u32 val; + u8 res[4]; +}; + +/* Audio video sync*/ +struct sunxi_avs { + u32 ctl; /* 0x80 */ + u32 cnt0; /* 0x84 */ + u32 cnt1; /* 0x88 */ + u32 div; /* 0x8c */ +}; + +/* 64 bit counter */ +struct sunxi_64cnt { + u32 ctl; /* 0xa0 */ + u32 lo; /* 0xa4 */ + u32 hi; /* 0xa8 */ +}; + +/* Watchdog */ +struct sunxi_wdog { + u32 ctl; /* 0x90 */ + u32 mode; /* 0x94 */ +}; + +/* Rtc */ +struct sunxi_rtc { + u32 ctl; /* 0x100 */ + u32 yymmdd; /* 0x104 */ + u32 hhmmss; /* 0x108 */ +}; + +/* Alarm */ +struct sunxi_alarm { + u32 ddhhmmss; /* 0x10c */ + u32 hhmmss; /* 0x110 */ + u32 en; /* 0x114 */ + u32 irqen; /* 0x118 */ + u32 irqsta; /* 0x11c */ +}; + +/* Timer general purpose register */ +struct sunxi_tgp { + u32 tgpd; +}; + +struct sunxi_timer_reg { + u32 tirqen; /* 0x00 */ + u32 tirqsta; /* 0x04 */ + u8 res1[8]; + struct sunxi_timer timer[6]; /* We have 6 timers */ + u8 res2[16]; + struct sunxi_avs avs; + struct sunxi_wdog wdog; + u8 res3[8]; + struct sunxi_64cnt cnt64; + u8 res4[0x58]; + struct sunxi_rtc rtc; + struct sunxi_alarm alarm; + struct sunxi_tgp tgp[4]; + u8 res5[8]; + u32 cpu_cfg; +}; + +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h index c2f9761..0c28e1b 100644 --- a/arch/arm/include/asm/arch-vf610/imx-regs.h +++ b/arch/arm/include/asm/arch-vf610/imx-regs.h @@ -215,6 +215,7 @@ #define DDRMC_CR139_PHY_WRLV_EN(v) ((v) & 0xff) #define DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(v) (((v) & 0x1f) << 27) #define DDRMC_CR154_PAD_ZQ_MODE(v) (((v) & 0x3) << 21) +#define DDRMC_CR154_DDR_SEL_PAD_CONTR(v) (((v) & 0x3) << 18) #define DDRMC_CR155_AXI0_AWCACHE (1 << 10) #define DDRMC_CR155_PAD_ODT_BYTE1(v) ((v) & 0x7) #define DDRMC_CR158_TWR(v) ((v) & 0x3f) diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c index b7e2efd..5788116 100644 --- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c @@ -16,6 +16,7 @@ #include <asm/arch/clk.h> #include <lcd.h> #include <atmel_lcdc.h> +#include <atmel_mci.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include <net.h> #endif @@ -217,6 +218,15 @@ void lcd_show_board_info(void) #endif /* CONFIG_LCD_INFO */ #endif +#ifdef CONFIG_GENERIC_ATMEL_MCI +int board_mmc_init(bd_t *bis) +{ + at91_mci_hw_init(); + + return atmel_mci_init((void *)ATMEL_BASE_MCI0); +} +#endif + int board_early_init_f(void) { at91_seriald_hw_init(); diff --git a/board/atmel/sama5d3_xplained/sama5d3_xplained.c b/board/atmel/sama5d3_xplained/sama5d3_xplained.c index 39f2dc6..92ed4e8 100644 --- a/board/atmel/sama5d3_xplained/sama5d3_xplained.c +++ b/board/atmel/sama5d3_xplained/sama5d3_xplained.c @@ -17,6 +17,9 @@ #include <atmel_mci.h> #include <net.h> #include <netdev.h> +#include <spl.h> +#include <asm/arch/atmel_mpddrc.h> +#include <asm/arch/at91_wdt.h> DECLARE_GLOBAL_DATA_PTR; @@ -128,3 +131,87 @@ int board_mmc_init(bd_t *bis) return 0; } #endif + +/* SPL */ +#ifdef CONFIG_SPL_BUILD +void spl_board_init(void) +{ +#ifdef CONFIG_SYS_USE_MMC + sama5d3_xplained_mci0_hw_init(); +#elif CONFIG_SYS_USE_NANDFLASH + sama5d3_xplained_nand_hw_init(); +#endif +} + +static void ddr2_conf(struct atmel_mpddr *ddr2) +{ + ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM); + + ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 | + ATMEL_MPDDRC_CR_NR_ROW_14 | + ATMEL_MPDDRC_CR_CAS_DDR_CAS3 | + ATMEL_MPDDRC_CR_ENRDM_ON | + ATMEL_MPDDRC_CR_NB_8BANKS | + ATMEL_MPDDRC_CR_NDQS_DISABLED | + ATMEL_MPDDRC_CR_DECOD_INTERLEAVED | + ATMEL_MPDDRC_CR_UNAL_SUPPORTED); + /* + * As the DDR2-SDRAm device requires a refresh time is 7.8125us + * when DDR run at 133MHz, so it needs (7.8125us * 133MHz / 10^9) clocks + */ + ddr2->rtr = 0x411; + + ddr2->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | + 8 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); + + ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET | + 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET | + 28 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET | + 26 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET); + + ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET | + 2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET | + 2 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET | + 7 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET | + 8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); +} + +void mem_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + struct atmel_mpddr ddr2; + + ddr2_conf(&ddr2); + + /* enable MPDDR clock */ + at91_periph_clk_enable(ATMEL_ID_MPDDRC); + writel(0x4, &pmc->scer); + + /* DDRAM2 Controller initialize */ + ddr2_init(ATMEL_BASE_DDRCS, &ddr2); +} + +void at91_pmc_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 tmp; + + tmp = AT91_PMC_PLLAR_29 | + AT91_PMC_PLLXR_PLLCOUNT(0x3f) | + AT91_PMC_PLLXR_MUL(43) | + AT91_PMC_PLLXR_DIV(1); + at91_plla_init(tmp); + + writel(0x3 << 8, &pmc->pllicpr); + + tmp = AT91_PMC_MCKR_MDIV_4 | + AT91_PMC_MCKR_CSS_PLLA; + at91_mck_init(tmp); +} +#endif diff --git a/board/freescale/vf610twr/vf610twr.c b/board/freescale/vf610twr/vf610twr.c index 4ee74c0..d64d3aa 100644 --- a/board/freescale/vf610twr/vf610twr.c +++ b/board/freescale/vf610twr/vf610twr.c @@ -217,7 +217,8 @@ void ddr_ctrl_init(void) &ddrmr->cr[139]); writel(DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) | - DDRMC_CR154_PAD_ZQ_MODE(1), &ddrmr->cr[154]); + DDRMC_CR154_PAD_ZQ_MODE(1) | + DDRMC_CR154_DDR_SEL_PAD_CONTR(3), &ddrmr->cr[154]); writel(DDRMC_CR155_AXI0_AWCACHE | DDRMC_CR155_PAD_ODT_BYTE1(2), &ddrmr->cr[155]); writel(DDRMC_CR158_TWR(6), &ddrmr->cr[158]); diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile new file mode 100644 index 0000000..cbf8f08 --- /dev/null +++ b/board/sunxi/Makefile @@ -0,0 +1,13 @@ +# +# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net> +# +# Based on some other board Makefile +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# +obj-y += board.o +obj-$(CONFIG_SUNXI_GMAC) += gmac.o +obj-$(CONFIG_CUBIETRUCK) += dram_cubietruck.o diff --git a/board/sunxi/board.c b/board/sunxi/board.c new file mode 100644 index 0000000..b05d0b9 --- /dev/null +++ b/board/sunxi/board.c @@ -0,0 +1,120 @@ +/* + * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net> + * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net> + * + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * Some board init for the Allwinner A10-evb board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/dram.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* add board specific code here */ +int board_init(void) +{ + int id_pfr1; + + gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100); + + asm volatile("mrc p15, 0, %0, c0, c1, 1" : "=r"(id_pfr1)); + debug("id_pfr1: 0x%08x\n", id_pfr1); + /* Generic Timer Extension available? */ + if ((id_pfr1 >> 16) & 0xf) { + debug("Setting CNTFRQ\n"); + /* CNTFRQ == 24 MHz */ + asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r"(24000000)); + } + + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE); + + return 0; +} + +#ifdef CONFIG_GENERIC_MMC +static void mmc_pinmux_setup(int sdc) +{ + unsigned int pin; + + switch (sdc) { + case 0: + /* D1-PF0, D0-PF1, CLK-PF2, CMD-PF3, D3-PF4, D4-PF5 */ + for (pin = SUNXI_GPF(0); pin <= SUNXI_GPF(5); pin++) { + sunxi_gpio_set_cfgpin(pin, SUNXI_GPF0_SDC0); + sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); + sunxi_gpio_set_drv(pin, 2); + } + break; + + case 1: + /* CMD-PH22, CLK-PH23, D0~D3-PH24~27 : 5 */ + for (pin = SUNXI_GPH(22); pin <= SUNXI_GPH(27); pin++) { + sunxi_gpio_set_cfgpin(pin, SUN4I_GPH22_SDC1); + sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); + sunxi_gpio_set_drv(pin, 2); + } + break; + + case 2: + /* CMD-PC6, CLK-PC7, D0-PC8, D1-PC9, D2-PC10, D3-PC11 */ + for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(11); pin++) { + sunxi_gpio_set_cfgpin(pin, SUNXI_GPC6_SDC2); + sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); + sunxi_gpio_set_drv(pin, 2); + } + break; + + case 3: + /* CMD-PI4, CLK-PI5, D0~D3-PI6~9 : 2 */ + for (pin = SUNXI_GPI(4); pin <= SUNXI_GPI(9); pin++) { + sunxi_gpio_set_cfgpin(pin, SUN4I_GPI4_SDC3); + sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); + sunxi_gpio_set_drv(pin, 2); + } + break; + + default: + printf("sunxi: invalid MMC slot %d for pinmux setup\n", sdc); + break; + } +} + +int board_mmc_init(bd_t *bis) +{ + mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT); + sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT); +#if !defined (CONFIG_SPL_BUILD) && defined (CONFIG_MMC_SUNXI_SLOT_EXTRA) + mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT_EXTRA); + sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA); +#endif + + return 0; +} +#endif + +#ifdef CONFIG_SPL_BUILD +void sunxi_board_init(void) +{ + unsigned long ramsize; + + printf("DRAM:"); + ramsize = sunxi_dram_init(); + printf(" %lu MiB\n", ramsize >> 20); + if (!ramsize) + hang(); +} +#endif diff --git a/board/sunxi/dram_cubietruck.c b/board/sunxi/dram_cubietruck.c new file mode 100644 index 0000000..fbcd687 --- /dev/null +++ b/board/sunxi/dram_cubietruck.c @@ -0,0 +1,31 @@ +/* this file is generated, don't edit it yourself */ + +#include <common.h> +#include <asm/arch/dram.h> + +static struct dram_para dram_para = { + .clock = 432, + .type = 3, + .rank_num = 1, + .density = 4096, + .io_width = 8, + .bus_width = 32, + .cas = 9, + .zq = 0x7f, + .odt_en = 0, + .size = 2048, + .tpr0 = 0x42d899b7, + .tpr1 = 0xa090, + .tpr2 = 0x22a00, + .tpr3 = 0x0, + .tpr4 = 0x1, + .tpr5 = 0x0, + .emr1 = 0x4, + .emr2 = 0x10, + .emr3 = 0x0, +}; + +unsigned long sunxi_dram_init(void) +{ + return dramc_init(&dram_para); +} diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c new file mode 100644 index 0000000..e48328d --- /dev/null +++ b/board/sunxi/gmac.c @@ -0,0 +1,32 @@ +#include <common.h> +#include <netdev.h> +#include <miiphy.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> + +int sunxi_gmac_initialize(bd_t *bis) +{ + int pin; + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* Set up clock gating */ + setbits_le32(&ccm->ahb_gate1, 0x1 << AHB_GATE_OFFSET_GMAC); + + /* Set MII clock */ + setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII | + CCM_GMAC_CTRL_GPIT_RGMII); + + /* Configure pin mux settings for GMAC */ + for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) { + /* skip unused pins in RGMII mode */ + if (pin == SUNXI_GPA(9) || pin == SUNXI_GPA(14)) + continue; + sunxi_gpio_set_cfgpin(pin, SUN7I_GPA0_GMAC); + sunxi_gpio_set_drv(pin, 3); + } + + return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII); +} @@ -103,6 +103,7 @@ Active arm arm926ejs at91 atmel at91sam9263ek Active arm arm926ejs at91 atmel at91sam9263ek at91sam9263ek_norflash at91sam9263ek:AT91SAM9263,SYS_USE_NORFLASH Stelian Pop <stelian@popies.net> Active arm arm926ejs at91 atmel at91sam9263ek at91sam9263ek_norflash_boot at91sam9263ek:AT91SAM9263,SYS_USE_BOOT_NORFLASH Stelian Pop <stelian@popies.net> Active arm arm926ejs at91 atmel at91sam9m10g45ek at91sam9m10g45ek_nandflash at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH Bo Shen<voice.shen@atmel.com> +Active arm arm926ejs at91 atmel at91sam9m10g45ek at91sam9m10g45ek_mmc at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_MMC Bo Shen<voice.shen@atmel.com> Active arm arm926ejs at91 atmel at91sam9n12ek at91sam9n12ek_mmc at91sam9n12ek:AT91SAM9N12,SYS_USE_MMC Josh Wu <josh.wu@atmel.com> Active arm arm926ejs at91 atmel at91sam9n12ek at91sam9n12ek_nandflash at91sam9n12ek:AT91SAM9N12,SYS_USE_NANDFLASH Josh Wu <josh.wu@atmel.com> Active arm arm926ejs at91 atmel at91sam9n12ek at91sam9n12ek_spiflash at91sam9n12ek:AT91SAM9N12,SYS_USE_SPIFLASH Josh Wu <josh.wu@atmel.com> @@ -296,7 +297,7 @@ Active arm armv7 exynos samsung smdkv310 Active arm armv7 exynos samsung trats trats - Lukasz Majewski <l.majewski@samsung.com> Active arm armv7 exynos samsung trats2 trats2 - Piotr Wilczek <p.wilczek@samsung.com> Active arm armv7 exynos samsung universal_c210 s5pc210_universal - Przemyslaw Marczak <p.marczak@samsung.com> -Active arm armv7 highbank - highbank highbank - Rob Herring <rob.herring@calxeda.com> +Active arm armv7 highbank - highbank highbank - Rob Herring <robh@kernel.org> Active arm armv7 keystone ti k2hk_evm k2hk_evm - Vitaly Andrianov <vitalya@ti.com> Active arm armv7 mx5 denx m53evk m53evk m53evk:IMX_CONFIG=board/denx/m53evk/imximage.cfg Marek Vasut <marek.vasut@gmail.com> Active arm armv7 mx5 esg ima3-mx53 ima3-mx53 ima3-mx53:IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg - @@ -380,6 +381,8 @@ Active arm armv7 rmobile renesas lager Active arm armv7 s5pc1xx samsung goni s5p_goni - Przemyslaw Marczak <p.marczak@samsung.com> Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang <mk7.kang@samsung.com> Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - - +Active arm armv7 sunxi - sunxi Cubietruck sun7i:CUBIETRUCK,SPL,SUNXI_GMAC,RGMII - +Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL,SUNXI_GMAC,RGMII - Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier <mathieu.poirier@linaro.org> Active arm armv7 u8500 st-ericsson u8500 u8500_href - - Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang <b18965@freescale.com> diff --git a/common/image.c b/common/image.c index fa4864d..26eb89a 100644 --- a/common/image.c +++ b/common/image.c @@ -139,6 +139,7 @@ static const table_entry_t uimage_type[] = { { IH_TYPE_STANDALONE, "standalone", "Standalone Program", }, { IH_TYPE_UBLIMAGE, "ublimage", "Davinci UBL image",}, { IH_TYPE_MXSIMAGE, "mxsimage", "Freescale MXS Boot Image",}, + { IH_TYPE_ATMELIMAGE, "atmelimage", "ATMEL ROM-Boot Image",}, { -1, "", "", }, }; diff --git a/doc/README.atmel_pmecc b/doc/README.atmel_pmecc index cf8373b..cc0f73d 100644 --- a/doc/README.atmel_pmecc +++ b/doc/README.atmel_pmecc @@ -27,3 +27,24 @@ Take AT91SAM9X5EK as an example, the board definition file likes: #define CONFIG_ATMEL_NAND_HW_PMECC 1 #define CONFIG_PMECC_CAP 2 #define CONFIG_PMECC_SECTOR_SIZE 512 + +How to enable PMECC header for direct programmable boot.bin +----------------------------------------------------------- +2014-05-19 Andreas Bießmann <andreas.devel@googlemail.com> + +The usual way to program SPL into NAND flash is to use the SAM-BA Atmel tool. +This however is often not usable when doing field updates. To be able to +program a SPL binary into NAND flash we need to add the PMECC header to the +binary before. Chapter '12.4.4.1 NAND Flash Boot: NAND Flash Detection' in +sama5d3 SoC spec (as of 03. April 2014) defines how this PMECC header has to +look like. In order to do so we have a new image type added to mkimage to +generate this PMECC header and integrated this into the build process of SPL. + +To enable the generation of atmel PMECC header for SPL one need to define +CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER. The required parameters are taken from +board configuration and compiled into the host tools atmel_pmecc_params. This +tool will be called in build process to parametrize mkimage for atmelimage +type. The mkimage tool has intentionally _not_ compiled in those parameters. + +The mkimage image type atmelimage also set the 6'th interrupt vector to the +correct value. This feature can also be used to setup a boot.bin for MMC boot. diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c index 0b70071..6517af1 100644 --- a/drivers/gpio/at91_gpio.c +++ b/drivers/gpio/at91_gpio.c @@ -34,6 +34,7 @@ static struct at91_port *at91_pio_get_port(unsigned port) #endif #endif default: + printf("Error: at91_gpio: Fail to get PIO base!\n"); return NULL; } } @@ -200,7 +201,7 @@ int at91_set_pio_output(unsigned port, u32 pin, int value) struct at91_port *at91_port = at91_pio_get_port(port); u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (port < ATMEL_PIO_PORTS) && (pin < 32)) { mask = 1 << pin; writel(mask, &at91_port->idr); writel(mask, &at91_port->pudr); diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 4c6ab9e..34febf5 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o obj-$(CONFIG_DWMMC) += dw_mmc.o obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o +obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index acca026..a57a9b1 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -243,9 +243,10 @@ mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) #ifdef DEBUG if (data->flags & MMC_DATA_READ) { + u32 cnt = word_count * 4; printf("Read Data:\n"); - print_buffer(0, data->dest, 1, - word_count*4, 0); + print_buffer(0, data->dest + cnt * block_count, + 1, cnt, 0); } #endif #ifdef DEBUG diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c new file mode 100644 index 0000000..eb7b115 --- /dev/null +++ b/drivers/mmc/sunxi_mmc.c @@ -0,0 +1,503 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Aaron <leafy.myeh@allwinnertech.com> + * + * MMC driver for allwinner sunxi platform. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <malloc.h> +#include <mmc.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mmc.h> + +struct sunxi_mmc_des { + u32 reserved1_1:1; + u32 dic:1; /* disable interrupt on completion */ + u32 last_des:1; /* 1-this data buffer is the last buffer */ + u32 first_des:1; /* 1-data buffer is the first buffer, + 0-data buffer contained in the next + descriptor is 1st buffer */ + u32 des_chain:1; /* 1-the 2nd address in the descriptor is the + next descriptor address */ + u32 end_of_ring:1; /* 1-last descriptor flag when using dual + data buffer in descriptor */ + u32 reserved1_2:24; + u32 card_err_sum:1; /* transfer error flag */ + u32 own:1; /* des owner:1-idma owns it, 0-host owns it */ +#define SDXC_DES_NUM_SHIFT 16 +#define SDXC_DES_BUFFER_MAX_LEN (1 << SDXC_DES_NUM_SHIFT) + u32 data_buf1_sz:16; + u32 data_buf2_sz:16; + u32 buf_addr_ptr1; + u32 buf_addr_ptr2; +}; + +struct sunxi_mmc_host { + unsigned mmc_no; + uint32_t *mclkreg; + unsigned database; + unsigned fatal_err; + unsigned mod_clk; + struct sunxi_mmc *reg; + struct mmc_config cfg; +}; + +/* support 4 mmc hosts */ +struct sunxi_mmc_host mmc_host[4]; + +static int mmc_resource_init(int sdc_no) +{ + struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no]; + struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + debug("init mmc %d resource\n", sdc_no); + + switch (sdc_no) { + case 0: + mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE; + mmchost->mclkreg = &ccm->sd0_clk_cfg; + break; + case 1: + mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE; + mmchost->mclkreg = &ccm->sd1_clk_cfg; + break; + case 2: + mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE; + mmchost->mclkreg = &ccm->sd2_clk_cfg; + break; + case 3: + mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE; + mmchost->mclkreg = &ccm->sd3_clk_cfg; + break; + default: + printf("Wrong mmc number %d\n", sdc_no); + return -1; + } + mmchost->database = (unsigned int)mmchost->reg + 0x100; + mmchost->mmc_no = sdc_no; + + return 0; +} + +static int mmc_clk_io_on(int sdc_no) +{ + unsigned int pll_clk; + unsigned int divider; + struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no]; + struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + debug("init mmc %d clock and io\n", sdc_no); + + /* config ahb clock */ + setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no)); + + /* config mod clock */ + pll_clk = clock_get_pll6(); + /* should be close to 100 MHz but no more, so round up */ + divider = ((pll_clk + 99999999) / 100000000) - 1; + writel(CCM_MMC_CTRL_ENABLE | CCM_MMC_CTRL_PLL6 | divider, + mmchost->mclkreg); + mmchost->mod_clk = pll_clk / (divider + 1); + + return 0; +} + +static int mmc_update_clk(struct mmc *mmc) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + unsigned int cmd; + unsigned timeout_msecs = 2000; + + cmd = SUNXI_MMC_CMD_START | + SUNXI_MMC_CMD_UPCLK_ONLY | + SUNXI_MMC_CMD_WAIT_PRE_OVER; + writel(cmd, &mmchost->reg->cmd); + while (readl(&mmchost->reg->cmd) & SUNXI_MMC_CMD_START) { + if (!timeout_msecs--) + return -1; + udelay(1000); + } + + /* clock update sets various irq status bits, clear these */ + writel(readl(&mmchost->reg->rint), &mmchost->reg->rint); + + return 0; +} + +static int mmc_config_clock(struct mmc *mmc, unsigned div) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + unsigned rval = readl(&mmchost->reg->clkcr); + + /* Disable Clock */ + rval &= ~SUNXI_MMC_CLK_ENABLE; + writel(rval, &mmchost->reg->clkcr); + if (mmc_update_clk(mmc)) + return -1; + + /* Change Divider Factor */ + rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK; + rval |= div; + writel(rval, &mmchost->reg->clkcr); + if (mmc_update_clk(mmc)) + return -1; + /* Re-enable Clock */ + rval |= SUNXI_MMC_CLK_ENABLE; + writel(rval, &mmchost->reg->clkcr); + + if (mmc_update_clk(mmc)) + return -1; + + return 0; +} + +static void mmc_set_ios(struct mmc *mmc) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + unsigned int clkdiv = 0; + + debug("set ios: bus_width: %x, clock: %d, mod_clk: %d\n", + mmc->bus_width, mmc->clock, mmchost->mod_clk); + + /* Change clock first */ + clkdiv = (mmchost->mod_clk + (mmc->clock >> 1)) / mmc->clock / 2; + if (mmc->clock) { + if (mmc_config_clock(mmc, clkdiv)) { + mmchost->fatal_err = 1; + return; + } + } + + /* Change bus width */ + if (mmc->bus_width == 8) + writel(0x2, &mmchost->reg->width); + else if (mmc->bus_width == 4) + writel(0x1, &mmchost->reg->width); + else + writel(0x0, &mmchost->reg->width); +} + +static int mmc_core_init(struct mmc *mmc) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + + /* Reset controller */ + writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl); + + return 0; +} + +static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + const int reading = !!(data->flags & MMC_DATA_READ); + const uint32_t status_bit = reading ? SUNXI_MMC_STATUS_FIFO_EMPTY : + SUNXI_MMC_STATUS_FIFO_FULL; + unsigned i; + unsigned byte_cnt = data->blocksize * data->blocks; + unsigned timeout_msecs = 2000; + unsigned *buff = (unsigned int *)(reading ? data->dest : data->src); + + for (i = 0; i < (byte_cnt >> 2); i++) { + while (readl(&mmchost->reg->status) & status_bit) { + if (!timeout_msecs--) + return -1; + udelay(1000); + } + + if (reading) + buff[i] = readl(mmchost->database); + else + writel(buff[i], mmchost->database); + } + + return 0; +} + +static int mmc_trans_data_by_dma(struct mmc *mmc, struct mmc_data *data) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + unsigned byte_cnt = data->blocksize * data->blocks; + unsigned char *buff; + unsigned des_idx = 0; + unsigned buff_frag_num = + (byte_cnt + SDXC_DES_BUFFER_MAX_LEN - 1) >> SDXC_DES_NUM_SHIFT; + unsigned remain; + unsigned i, rval; + ALLOC_CACHE_ALIGN_BUFFER(struct sunxi_mmc_des, pdes, buff_frag_num); + + buff = data->flags & MMC_DATA_READ ? + (unsigned char *)data->dest : (unsigned char *)data->src; + remain = byte_cnt & (SDXC_DES_BUFFER_MAX_LEN - 1); + + flush_cache((unsigned long)buff, (unsigned long)byte_cnt); + for (i = 0; i < buff_frag_num; i++, des_idx++) { + memset((void *)&pdes[des_idx], 0, sizeof(struct sunxi_mmc_des)); + pdes[des_idx].des_chain = 1; + pdes[des_idx].own = 1; + pdes[des_idx].dic = 1; + if (buff_frag_num > 1 && i != buff_frag_num - 1) + pdes[des_idx].data_buf1_sz = 0; /* 0 == max_len */ + else + pdes[des_idx].data_buf1_sz = remain; + + pdes[des_idx].buf_addr_ptr1 = + (u32) buff + i * SDXC_DES_BUFFER_MAX_LEN; + if (i == 0) + pdes[des_idx].first_des = 1; + + if (i == buff_frag_num - 1) { + pdes[des_idx].dic = 0; + pdes[des_idx].last_des = 1; + pdes[des_idx].end_of_ring = 1; + pdes[des_idx].buf_addr_ptr2 = 0; + } else { + pdes[des_idx].buf_addr_ptr2 = (u32)&pdes[des_idx + 1]; + } + } + flush_cache((unsigned long)pdes, + sizeof(struct sunxi_mmc_des) * (des_idx + 1)); + + rval = readl(&mmchost->reg->gctrl); + /* Enable DMA */ + writel(rval | SUNXI_MMC_GCTRL_DMA_RESET | SUNXI_MMC_GCTRL_DMA_ENABLE, + &mmchost->reg->gctrl); + /* Reset iDMA */ + writel(SUNXI_MMC_IDMAC_RESET, &mmchost->reg->dmac); + /* Enable iDMA */ + writel(SUNXI_MMC_IDMAC_FIXBURST | SUNXI_MMC_IDMAC_ENABLE, + &mmchost->reg->dmac); + rval = readl(&mmchost->reg->idie) & + ~(SUNXI_MMC_IDIE_TXIRQ|SUNXI_MMC_IDIE_RXIRQ); + if (data->flags & MMC_DATA_WRITE) + rval |= SUNXI_MMC_IDIE_TXIRQ; + else + rval |= SUNXI_MMC_IDIE_RXIRQ; + writel(rval, &mmchost->reg->idie); + writel((u32) pdes, &mmchost->reg->dlba); + writel((0x2 << 28) | (0x7 << 16) | (0x01 << 3), + &mmchost->reg->ftrglevel); + + return 0; +} + +static void mmc_enable_dma_accesses(struct mmc *mmc, int dma) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + + unsigned int gctrl = readl(&mmchost->reg->gctrl); + if (dma) + gctrl &= ~SUNXI_MMC_GCTRL_ACCESS_BY_AHB; + else + gctrl |= SUNXI_MMC_GCTRL_ACCESS_BY_AHB; + writel(gctrl, &mmchost->reg->gctrl); +} + +static int mmc_rint_wait(struct mmc *mmc, unsigned int timeout_msecs, + unsigned int done_bit, const char *what) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + unsigned int status; + + do { + status = readl(&mmchost->reg->rint); + if (!timeout_msecs-- || + (status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT)) { + debug("%s timeout %x\n", what, + status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT); + return TIMEOUT; + } + udelay(1000); + } while (!(status & done_bit)); + + return 0; +} + +static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + unsigned int cmdval = SUNXI_MMC_CMD_START; + unsigned int timeout_msecs; + int error = 0; + unsigned int status = 0; + unsigned int usedma = 0; + unsigned int bytecnt = 0; + + if (mmchost->fatal_err) + return -1; + if (cmd->resp_type & MMC_RSP_BUSY) + debug("mmc cmd %d check rsp busy\n", cmd->cmdidx); + if (cmd->cmdidx == 12) + return 0; + + if (!cmd->cmdidx) + cmdval |= SUNXI_MMC_CMD_SEND_INIT_SEQ; + if (cmd->resp_type & MMC_RSP_PRESENT) + cmdval |= SUNXI_MMC_CMD_RESP_EXPIRE; + if (cmd->resp_type & MMC_RSP_136) + cmdval |= SUNXI_MMC_CMD_LONG_RESPONSE; + if (cmd->resp_type & MMC_RSP_CRC) + cmdval |= SUNXI_MMC_CMD_CHK_RESPONSE_CRC; + + if (data) { + if ((u32) data->dest & 0x3) { + error = -1; + goto out; + } + + cmdval |= SUNXI_MMC_CMD_DATA_EXPIRE|SUNXI_MMC_CMD_WAIT_PRE_OVER; + if (data->flags & MMC_DATA_WRITE) + cmdval |= SUNXI_MMC_CMD_WRITE; + if (data->blocks > 1) + cmdval |= SUNXI_MMC_CMD_AUTO_STOP; + writel(data->blocksize, &mmchost->reg->blksz); + writel(data->blocks * data->blocksize, &mmchost->reg->bytecnt); + } + + debug("mmc %d, cmd %d(0x%08x), arg 0x%08x\n", mmchost->mmc_no, + cmd->cmdidx, cmdval | cmd->cmdidx, cmd->cmdarg); + writel(cmd->cmdarg, &mmchost->reg->arg); + + if (!data) + writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd); + + /* + * transfer data and check status + * STATREG[2] : FIFO empty + * STATREG[3] : FIFO full + */ + if (data) { + int ret = 0; + + bytecnt = data->blocksize * data->blocks; + debug("trans data %d bytes\n", bytecnt); +#if defined(CONFIG_MMC_SUNXI_USE_DMA) && !defined(CONFIG_SPL_BUILD) + if (bytecnt > 64) { +#else + if (0) { +#endif + usedma = 1; + mmc_enable_dma_accesses(mmc, 1); + ret = mmc_trans_data_by_dma(mmc, data); + writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd); + } else { + mmc_enable_dma_accesses(mmc, 0); + writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd); + ret = mmc_trans_data_by_cpu(mmc, data); + } + if (ret) { + error = readl(&mmchost->reg->rint) & \ + SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT; + error = TIMEOUT; + goto out; + } + } + + error = mmc_rint_wait(mmc, 0xfffff, SUNXI_MMC_RINT_COMMAND_DONE, "cmd"); + if (error) + goto out; + + if (data) { + timeout_msecs = usedma ? 120 * bytecnt : 120; + debug("cacl timeout %x msec\n", timeout_msecs); + error = mmc_rint_wait(mmc, timeout_msecs, + data->blocks > 1 ? + SUNXI_MMC_RINT_AUTO_COMMAND_DONE : + SUNXI_MMC_RINT_DATA_OVER, + "data"); + if (error) + goto out; + } + + if (cmd->resp_type & MMC_RSP_BUSY) { + timeout_msecs = 2000; + do { + status = readl(&mmchost->reg->status); + if (!timeout_msecs--) { + debug("busy timeout\n"); + error = TIMEOUT; + goto out; + } + udelay(1000); + } while (status & SUNXI_MMC_STATUS_CARD_DATA_BUSY); + } + + if (cmd->resp_type & MMC_RSP_136) { + cmd->response[0] = readl(&mmchost->reg->resp3); + cmd->response[1] = readl(&mmchost->reg->resp2); + cmd->response[2] = readl(&mmchost->reg->resp1); + cmd->response[3] = readl(&mmchost->reg->resp0); + debug("mmc resp 0x%08x 0x%08x 0x%08x 0x%08x\n", + cmd->response[3], cmd->response[2], + cmd->response[1], cmd->response[0]); + } else { + cmd->response[0] = readl(&mmchost->reg->resp0); + debug("mmc resp 0x%08x\n", cmd->response[0]); + } +out: + if (data && usedma) { + /* IDMASTAREG + * IDST[0] : idma tx int + * IDST[1] : idma rx int + * IDST[2] : idma fatal bus error + * IDST[4] : idma descriptor invalid + * IDST[5] : idma error summary + * IDST[8] : idma normal interrupt sumary + * IDST[9] : idma abnormal interrupt sumary + */ + status = readl(&mmchost->reg->idst); + writel(status, &mmchost->reg->idst); + writel(0, &mmchost->reg->idie); + writel(0, &mmchost->reg->dmac); + writel(readl(&mmchost->reg->gctrl) & ~SUNXI_MMC_GCTRL_DMA_ENABLE, + &mmchost->reg->gctrl); + } + if (error < 0) { + writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl); + mmc_update_clk(mmc); + } + writel(0xffffffff, &mmchost->reg->rint); + writel(readl(&mmchost->reg->gctrl) | SUNXI_MMC_GCTRL_FIFO_RESET, + &mmchost->reg->gctrl); + + return error; +} + +static const struct mmc_ops sunxi_mmc_ops = { + .send_cmd = mmc_send_cmd, + .set_ios = mmc_set_ios, + .init = mmc_core_init, +}; + +int sunxi_mmc_init(int sdc_no) +{ + struct mmc_config *cfg = &mmc_host[sdc_no].cfg; + + memset(&mmc_host[sdc_no], 0, sizeof(struct sunxi_mmc_host)); + + cfg->name = "SUNXI SD/MMC"; + cfg->ops = &sunxi_mmc_ops; + + cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; + cfg->host_caps = MMC_MODE_4BIT; + cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; + cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; + + cfg->f_min = 400000; + cfg->f_max = 52000000; + + mmc_resource_init(sdc_no); + mmc_clk_io_on(sdc_no); + + if (mmc_create(cfg, &mmc_host[sdc_no]) == NULL) + return -1; + + return 0; +} diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 78751b2..7186e3b 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -249,7 +249,7 @@ static int dw_eth_init(struct eth_device *dev, bd_t *bis) rx_descs_init(dev); tx_descs_init(dev); - writel(FIXEDBURST | PRIORXTX_41 | BURST_16, &dma_p->busmode); + writel(FIXEDBURST | PRIORXTX_41 | DMA_PBL, &dma_p->busmode); writel(readl(&dma_p->opmode) | FLUSHTXFIFO | STOREFORWARD, &dma_p->opmode); @@ -280,10 +280,18 @@ static int dw_eth_send(struct eth_device *dev, void *packet, int length) u32 desc_num = priv->tx_currdescnum; struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num]; - /* Invalidate only "status" field for the following check */ - invalidate_dcache_range((unsigned long)&desc_p->txrx_status, - (unsigned long)&desc_p->txrx_status + - sizeof(desc_p->txrx_status)); + /* + * Strictly we only need to invalidate the "txrx_status" field + * for the following check, but on some platforms we cannot + * invalidate only 4 bytes, so roundup to + * ARCH_DMA_MINALIGN. This is safe because the individual + * descriptors in the array are each aligned to + * ARCH_DMA_MINALIGN. + */ + invalidate_dcache_range( + (unsigned long)desc_p, + (unsigned long)desc_p + + roundup(sizeof(desc_p->txrx_status), ARCH_DMA_MINALIGN)); /* Check if the descriptor is owned by CPU */ if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) { @@ -351,7 +359,7 @@ static int dw_eth_recv(struct eth_device *dev) /* Invalidate received data */ invalidate_dcache_range((unsigned long)desc_p->dmamac_addr, (unsigned long)desc_p->dmamac_addr + - length); + roundup(length, ARCH_DMA_MINALIGN)); NetReceive(desc_p->dmamac_addr, length); @@ -414,7 +422,8 @@ int designware_initialize(ulong base_addr, u32 interface) * Since the priv structure contains the descriptors which need a strict * buswidth alignment, memalign is used to allocate memory */ - priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev)); + priv = (struct dw_eth_dev *) memalign(ARCH_DMA_MINALIGN, + sizeof(struct dw_eth_dev)); if (!priv) { free(dev); return -ENOMEM; diff --git a/drivers/net/designware.h b/drivers/net/designware.h index 382b0c7..ce51102 100644 --- a/drivers/net/designware.h +++ b/drivers/net/designware.h @@ -77,18 +77,18 @@ struct eth_dma_regs { #define DW_DMA_BASE_OFFSET (0x1000) +/* Default DMA Burst length */ +#ifndef CONFIG_DW_GMAC_DEFAULT_DMA_PBL +#define CONFIG_DW_GMAC_DEFAULT_DMA_PBL 8 +#endif + /* Bus mode register definitions */ #define FIXEDBURST (1 << 16) #define PRIORXTX_41 (3 << 14) #define PRIORXTX_31 (2 << 14) #define PRIORXTX_21 (1 << 14) #define PRIORXTX_11 (0 << 14) -#define BURST_1 (1 << 8) -#define BURST_2 (2 << 8) -#define BURST_4 (4 << 8) -#define BURST_8 (8 << 8) -#define BURST_16 (16 << 8) -#define BURST_32 (32 << 8) +#define DMA_PBL (CONFIG_DW_GMAC_DEFAULT_DMA_PBL<<8) #define RXHIGHPRIO (1 << 1) #define DMAMAC_SRST (1 << 0) @@ -215,15 +215,14 @@ struct dmamacdescr { #endif struct dw_eth_dev { - u32 interface; - u32 tx_currdescnum; - u32 rx_currdescnum; - struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM]; struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM]; + char txbuffs[TX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN); + char rxbuffs[RX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN); - char txbuffs[TX_TOTAL_BUFSIZE]; - char rxbuffs[RX_TOTAL_BUFSIZE]; + u32 interface; + u32 tx_currdescnum; + u32 rx_currdescnum; struct eth_mac_regs *mac_regs_p; struct eth_dma_regs *dma_regs_p; diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index ccfda71..341b21d 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -22,7 +22,6 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ #define CONFIG_AT91SAM9M10G45EK -#define CONFIG_AT91FAMILY #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS @@ -34,6 +33,8 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT +#define CONFIG_SYS_GENERIC_BOARD + /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO @@ -115,6 +116,20 @@ #endif +/* MMC */ +#define CONFIG_CMD_MMC + +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#endif + +#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + /* Ethernet */ #define CONFIG_MACB #define CONFIG_RMII @@ -126,7 +141,6 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 -#define CONFIG_DOS_PARTITION #define CONFIG_USB_STORAGE #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ @@ -134,6 +148,7 @@ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END 0x23e00000 +#ifdef CONFIG_SYS_USE_NANDFLASH /* bootstrap + u-boot + env in nandflash */ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0xc0000 @@ -149,6 +164,24 @@ "256k(env),256k(env_redundant),256k(spare)," \ "512k(dtb),6M(kernel)ro,-(rootfs) " \ "root=/dev/mtdblock7 rw rootfstype=jffs2" +#elif CONFIG_SYS_USE_MMC +/* bootstrap + u-boot + env + linux in mmc */ +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE 0 +#define FAT_ENV_PART 1 +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_ENV_IS_IN_FAT +#define CONFIG_FAT_WRITE +#define CONFIG_ENV_SIZE 0x4000 + +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "mtdparts=atmel_nand:" \ + "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \ + "root=/dev/mmcblk0p2 rw rootwait" +#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \ + "fatload mmc 0:1 0x72000000 zImage; " \ + "bootz 0x72000000 - 0x71000000" +#endif #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index e23549d..9b0e588 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -18,9 +18,6 @@ #define CONFIG_SYS_TEXT_BASE 0x26f00000 -#define CONFIG_ARM926EJS -#define CONFIG_AT91FAMILY - /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */ diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index f0a6757..b1d4baa 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -18,7 +18,6 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ #define CONFIG_AT91SAM9X5EK -#define CONFIG_AT91FAMILY #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS @@ -30,6 +29,8 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT +#define CONFIG_SYS_GENERIC_BOARD + /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 959e188..6171060 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -27,15 +27,12 @@ #define CONFIG_SYS_TEXT_BASE 0x73f00000 -#define CONFIG_AT91_LEGACY #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_AT91FAMILY - #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index 39f7062..1feaefd 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -32,7 +32,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT #define CONFIG_DISPLAY_CPUINFO #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 480d867..c81fc44 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -23,8 +23,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5 /* CPU information */ -#define CONFIG_ARM926EJS -#define CONFIG_AT91FAMILY #define CONFIG_DISPLAY_CPUINFO /* Display at console. */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/highbank.h b/include/configs/highbank.h index a6202cf..da1c837 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -13,6 +13,7 @@ #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_OF_BOARD_SETUP #define CONFIG_FIT diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 96a889f..f5f4961 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -66,6 +66,7 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_CMD_USB +#define CONFIG_CMD_FS_GENERIC #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION @@ -109,20 +110,41 @@ #define CONFIG_LOADADDR 0x00800000 #define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}" #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2" + +#if defined(CONFIG_LSXHL) +#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" +#elif defined(CONFIG_LSCHLV2) +#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" +#else +#error "Unsupported board" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ - "bootsource=hdd\0" \ + "bootsource=legacy\0" \ "hdpart=0:1\0" \ - "bootcmd_net=bootp 0x00100000 uImage " \ - "&& tftpboot 0x00800000 uInitrd " \ + "kernel_addr=0x00800000\0" \ + "ramdisk_addr=0x01000000\0" \ + "fdt_addr=0x01ff0000\0" \ + "bootcmd_legacy=ide reset " \ + "&& load ide ${hdpart} 0x00100000 /uImage.buffalo " \ + "&& load ide ${hdpart} 0x00800000 /initrd.buffalo " \ "&& bootm 0x00100000 0x00800000\0" \ + "bootcmd_net=bootp ${kernel_addr} uImage " \ + "&& tftpboot ${ramdisk_addr} uInitrd " \ + "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ + "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "bootcmd_hdd=ide reset " \ - "&& ext2load ide ${hdpart} 0x00100000 /uImage " \ - "&& ext2load ide ${hdpart} 0x00800000 /uInitrd " \ - "&& bootm 0x00100000 0x00800000\0" \ + "&& load ide ${hdpart} ${kernel_addr} /uImage " \ + "&& load ide ${hdpart} ${ramdisk_addr} /uInitrd " \ + "&& load ide ${hdpart} ${fdt_addr} " \ + "/" CONFIG_FDTFILE " " \ + "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "bootcmd_usb=usb start " \ - "&& fatload usb 0:1 0x00100000 /uImage " \ - "&& fatload usb 0:1 0x00800000 /uInitrd " \ - "&& bootm 0x00100000 0x00800000\0" \ + "&& load usb 0:1 ${kernel_addr} /uImage " \ + "&& load usb 0:1 ${ramdisk_addr} /uInitrd " \ + "&& load usb 0:1 ${fdt_addr} " \ + "/" CONFIG_FDTFILE " " \ + "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ "eraseenv=sf probe 0 " \ "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ @@ -161,6 +183,7 @@ #undef CONFIG_SYS_IDE_MAXDEVICE #define CONFIG_SYS_IDE_MAXDEVICE 1 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#define CONFIG_SYS_64BIT_LBA #endif #endif /* _CONFIG_LSXL_H */ diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 41c946d..f72ab0b 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -18,15 +18,20 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT + +#ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT +#endif + #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT /* Device Tree support */ +#define CONFIG_SYS_GENERIC_BOARD + /* general purpose I/O */ #define CONFIG_AT91_GPIO @@ -74,8 +79,12 @@ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS #define CONFIG_SYS_SDRAM_SIZE 0x10000000 +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x310000 +#else #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) +#endif /* NAND flash */ #define CONFIG_CMD_NAND @@ -199,4 +208,46 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +/* SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#elif CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 + +#endif + #endif diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 516be85..da27180 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -21,7 +21,6 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT #ifndef CONFIG_SPL_BUILD @@ -34,6 +33,8 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT /* Device Tree support */ +#define CONFIG_SYS_GENERIC_BOARD + /* general purpose I/O */ #define CONFIG_AT91_GPIO @@ -281,6 +282,7 @@ #define CONFIG_SYS_NAND_OOBSIZE 64 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SERIALFLASH #define CONFIG_SPL_SPI_SUPPORT diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h new file mode 100644 index 0000000..9b693f7 --- /dev/null +++ b/include/configs/sun7i.h @@ -0,0 +1,24 @@ +/* + * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net> + * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net> + * + * Configuration settings for the Allwinner A20 (sun7i) CPU + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * A20 specific configuration + */ +#define CONFIG_SUN7I /* sun7i SoC generation */ + +#define CONFIG_SYS_PROMPT "sun7i# " + +/* + * Include common sunxi configuration where most the settings are + */ +#include <configs/sunxi-common.h> + +#endif /* __CONFIG_H */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h new file mode 100644 index 0000000..5d72d62 --- /dev/null +++ b/include/configs/sunxi-common.h @@ -0,0 +1,195 @@ +/* + * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> + * + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * Configuration settings for the Allwinner sunxi series of boards. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_COMMON_CONFIG_H +#define _SUNXI_COMMON_CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_SUNXI /* sunxi family */ +#ifdef CONFIG_SPL_BUILD +#ifndef CONFIG_SPL_FEL +#define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ +#endif +#endif + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +#define CONFIG_SYS_TEXT_BASE 0x4a000000 + +/* + * Display CPU information + */ +#define CONFIG_DISPLAY_CPUINFO + +/* Serial & console */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +/* ns16550 reg in the low bits of cpu reg */ +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_CLK 24000000 +#define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE +#define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE +#define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE +#define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE + +/* DRAM Base */ +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_INIT_RAM_ADDR 0x0 +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE +#define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ + +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_SETEXPR + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG + +/* mmc config */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_MMC +#define CONFIG_MMC_SUNXI +#define CONFIG_MMC_SUNXI_SLOT 0 +#define CONFIG_MMC_SUNXI_USE_DMA +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ + +/* 4MB of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) + +/* + * Miscellaneous configurable options + */ +#define CONFIG_CMD_ECHO +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_GENERIC_BOARD + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR 0x48000000 /* default load address */ + +/* standalone support */ +#define CONFIG_STANDALONE_LOAD_ADDR 0x48000000 + +#define CONFIG_SYS_HZ 1000 + +/* baudrate */ +#define CONFIG_BAUDRATE 115200 + +/* The stack sizes are set up in start.S using the settings below */ +#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ + +/* FLASH and environment organization */ + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* 512 KiB */ +#define CONFIG_IDENT_STRING " Allwinner Technology" + +#define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */ +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootm_size=0x10000000\0" + +#define CONFIG_SYS_BOOT_GET_CMDLINE + +#include <config_cmd_default.h> + +#define CONFIG_FAT_WRITE /* enable write access */ + +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT + +#ifdef CONFIG_SPL_FEL + +#define CONFIG_SPL +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds" +#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi" +#define CONFIG_SPL_TEXT_BASE 0x2000 +#define CONFIG_SPL_MAX_SIZE 0x4000 /* 16 KiB */ + +#else /* CONFIG_SPL */ + +#define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KiB */ + +#define CONFIG_SPL_TEXT_BASE 0x20 /* sram start+header */ +#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */ + +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT + +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 80 /* 40KiB */ +#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ + +#endif /* CONFIG_SPL */ + +/* end of 32 KiB in sram */ +#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ +#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK +#define CONFIG_SYS_SPL_MALLOC_START 0x4ff00000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 /* 512 KiB */ + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS + +#define CONFIG_CONS_INDEX 1 /* UART0 */ + +#ifdef CONFIG_SUNXI_GMAC +#define CONFIG_DESIGNWARE_ETH /* GMAC can use designware driver */ +#define CONFIG_DW_AUTONEG +#define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ +#define CONFIG_PHY_ADDR 1 +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_PHYLIB +#endif + +#ifdef CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_DNS +#define CONFIG_NETCONSOLE +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#endif + +#if !defined CONFIG_ENV_IS_IN_MMC && \ + !defined CONFIG_ENV_IS_IN_NAND && \ + !defined CONFIG_ENV_IS_IN_FAT && \ + !defined CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_IS_NOWHERE +#endif + +#ifndef CONFIG_SPL_BUILD +#include <config_distro_defaults.h> +#endif + +#endif /* _SUNXI_COMMON_CONFIG_H */ diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h index 14c6e67..bef821f 100644 --- a/include/configs/vl_ma2sc.h +++ b/include/configs/vl_ma2sc.h @@ -13,8 +13,6 @@ /*--------------------------------------------------------------------------*/ -#define CONFIG_ARM926EJS /* This is an ARM926EJS Core */ -#define CONFIG_AT91FAMILY #define CONFIG_AT91SAM9263 /* It's an Atmel AT91SAM9263 SoC*/ #define CONFIG_VL_MA2SC /* on an VL_MA2SC Board */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/image.h b/include/image.h index 1886168..41e56ab 100644 --- a/include/image.h +++ b/include/image.h @@ -225,6 +225,7 @@ struct lmb; #define IH_TYPE_PBLIMAGE 15 /* Freescale PBL Boot Image */ #define IH_TYPE_MXSIMAGE 16 /* Freescale MXSBoot Image */ #define IH_TYPE_GPIMAGE 17 /* TI Keystone GPHeader Image */ +#define IH_TYPE_ATMELIMAGE 18 /* ATMEL ROM bootable Image */ /* * Compression Types diff --git a/include/netdev.h b/include/netdev.h index e211f18..63481ec 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -78,6 +78,7 @@ int sh_eth_initialize(bd_t *bis); int skge_initialize(bd_t *bis); int smc91111_initialize(u8 dev_num, int base_addr); int smc911x_initialize(u8 dev_num, int base_addr); +int sunxi_gmac_initialize(bd_t *bis); int sunxi_wemac_initialize(bd_t *bis); int tsi108_eth_initialize(bd_t *bis); int uec_standard_init(bd_t *bis); diff --git a/spl/Makefile b/spl/Makefile index 55500fd..bf677aa 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -183,12 +183,29 @@ MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE) MLO MLO.byteswap: $(obj)/u-boot-spl.bin $(call if_changed,mkimage) +MKIMAGEFLAGS_boot.bin = -T atmelimage + +ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y) +MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params) + +boot.bin: $(obj)/../tools/atmel_pmecc_params +endif + +boot.bin: $(obj)/u-boot-spl.bin + $(call if_changed,mkimage) + ALL-y += $(obj)/$(SPL_BIN).bin ifdef CONFIG_SAMSUNG ALL-y += $(obj)/$(BOARD)-spl.bin endif +ifdef CONFIG_SUNXI +ifndef CONFIG_SPL_FEL +ALL-y += $(obj)/sunxi-spl.bin +endif +endif + all: $(ALL-y) ifdef CONFIG_SAMSUNG @@ -216,6 +233,13 @@ ifneq ($(CONFIG_SPL_TEXT_BASE),) LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE) endif +ifdef CONFIG_SUNXI +quiet_cmd_mksunxiboot = MKSUNXI $@ +cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@ +$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin + $(call if_changed,mksunxiboot) +endif + quiet_cmd_u-boot-spl = LD $@ cmd_u-boot-spl = cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \ $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \ diff --git a/tools/.gitignore b/tools/.gitignore index b1e997f..725db90 100644 --- a/tools/.gitignore +++ b/tools/.gitignore @@ -11,6 +11,7 @@ /mkexynosspl /mpc86x_clk /mxsboot +/mksunxiboot /ncb /proftool /relocate-rela diff --git a/tools/Makefile b/tools/Makefile index 6e43a01..7610557 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -38,6 +38,8 @@ ENVCRC-$(CONFIG_ENV_IS_IN_NVRAM) = y ENVCRC-$(CONFIG_ENV_IS_IN_SPI_FLASH) = y CONFIG_BUILD_ENVCRC ?= $(ENVCRC-y) +hostprogs-$(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER) += atmel_pmecc_params$(SFX) + # TODO: CONFIG_CMD_LICENSE does not work hostprogs-$(CONFIG_CMD_LICENSE) += bin2header$(SFX) hostprogs-$(CONFIG_LCD_LOGO) += bmp_logo$(SFX) @@ -69,6 +71,7 @@ RSA_OBJS-$(CONFIG_FIT_SIGNATURE) := rsa-sign.o rsa-verify.o rsa-checksum.o # common objs for dumpimage and mkimage dumpimage-mkimage-objs := aisimage.o \ + atmelimage.o \ $(FIT_SIG_OBJS-y) \ crc32.o \ default_image.o \ @@ -131,6 +134,8 @@ hostprogs-$(CONFIG_MX23) += mxsboot$(SFX) hostprogs-$(CONFIG_MX28) += mxsboot$(SFX) HOSTCFLAGS_mxsboot$(SFX).o := -pedantic +hostprogs-$(CONFIG_SUNXI) += mksunxiboot$(SFX) + hostprogs-$(CONFIG_NETCONSOLE) += ncb$(SFX) hostprogs-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX) diff --git a/tools/atmel_pmecc_params.c b/tools/atmel_pmecc_params.c new file mode 100644 index 0000000..8eaf27f --- /dev/null +++ b/tools/atmel_pmecc_params.c @@ -0,0 +1,51 @@ +/* + * (C) Copyright 2014 Andreas Bießmann <andreas.devel@googlemail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * This is a host tool for generating an appropriate string out of board + * configuration. The string is required for correct generation of PMECC + * header which in turn is required for NAND flash booting of Atmel AT91 style + * hardware. + * + * See doc/README.atmel_pmecc for more information. + */ + +#include <config.h> +#include <stdlib.h> + +static int pmecc_get_ecc_bytes(int cap, int sector_size) +{ + int m = 12 + sector_size / 512; + return (m * cap + 7) / 8; +} + +int main(int argc, char *argv[]) +{ + unsigned int use_pmecc = 0; + unsigned int sector_per_page; + unsigned int sector_size = CONFIG_PMECC_SECTOR_SIZE; + unsigned int oob_size = CONFIG_SYS_NAND_OOBSIZE; + unsigned int ecc_bits = CONFIG_PMECC_CAP; + unsigned int ecc_offset; + +#ifdef CONFIG_ATMEL_NAND_HW_PMECC + use_pmecc = 1; +#endif + + sector_per_page = CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_PMECC_SECTOR_SIZE; + ecc_offset = oob_size - + pmecc_get_ecc_bytes(ecc_bits, sector_size) * sector_per_page; + + printf("usePmecc=%d,", use_pmecc); + printf("sectorPerPage=%d,", sector_per_page); + printf("sectorSize=%d,", sector_size); + printf("spareSize=%d,", oob_size); + printf("eccBits=%d,", ecc_bits); + printf("eccOffset=%d", ecc_offset); + printf("\n"); + + exit(EXIT_SUCCESS); +} diff --git a/tools/atmelimage.c b/tools/atmelimage.c new file mode 100644 index 0000000..c8101d2 --- /dev/null +++ b/tools/atmelimage.c @@ -0,0 +1,342 @@ +/* + * (C) Copyright 2014 + * Andreas Bießmann <andreas.devel@googlemail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imagetool.h" +#include "mkimage.h" + +#include <image.h> + +#define pr_err(fmt, args...) fprintf(stderr, "atmelimage Error: " fmt, ##args) + +static int atmel_check_image_type(uint8_t type) +{ + if (type == IH_TYPE_ATMELIMAGE) + return EXIT_SUCCESS; + else + return EXIT_FAILURE; +} + +static uint32_t nand_pmecc_header[52]; + +/* + * A helper struct for parsing the mkimage -n parameter + * + * Keep in same order as the configs array! + */ +static struct pmecc_config { + int use_pmecc; + int sector_per_page; + int spare_size; + int ecc_bits; + int sector_size; + int ecc_offset; +} pmecc; + +/* + * Strings used for configure the PMECC header via -n mkimage switch + * + * We estimate a coma separated list of key=value pairs. The mkimage -n + * parameter argument should not contain any whitespace. + * + * Keep in same order as struct pmecc_config! + */ +static const char * const configs[] = { + "usePmecc", + "sectorPerPage", + "spareSize", + "eccBits", + "sectorSize", + "eccOffset" +}; + +static int atmel_find_pmecc_parameter_in_token(const char *token) +{ + size_t pos; + char *param; + + debug("token: '%s'\n", token); + + for (pos = 0; pos < ARRAY_SIZE(configs); pos++) { + if (strncmp(token, configs[pos], strlen(configs[pos])) == 0) { + param = strstr(token, "="); + if (!param) + goto err; + + param++; + debug("\t%s parameter: '%s'\n", configs[pos], param); + + switch (pos) { + case 0: + pmecc.use_pmecc = strtol(param, NULL, 10); + return EXIT_SUCCESS; + case 1: + pmecc.sector_per_page = strtol(param, NULL, 10); + return EXIT_SUCCESS; + case 2: + pmecc.spare_size = strtol(param, NULL, 10); + return EXIT_SUCCESS; + case 3: + pmecc.ecc_bits = strtol(param, NULL, 10); + return EXIT_SUCCESS; + case 4: + pmecc.sector_size = strtol(param, NULL, 10); + return EXIT_SUCCESS; + case 5: + pmecc.ecc_offset = strtol(param, NULL, 10); + return EXIT_SUCCESS; + } + } + } + +err: + pr_err("Could not find parameter in token '%s'\n", token); + return EXIT_FAILURE; +} + +static int atmel_parse_pmecc_params(char *txt) +{ + char *token; + + token = strtok(txt, ","); + while (token != NULL) { + if (atmel_find_pmecc_parameter_in_token(token)) + return EXIT_FAILURE; + + token = strtok(NULL, ","); + } + + return EXIT_SUCCESS; +} + +static int atmel_verify_header(unsigned char *ptr, int image_size, + struct image_tool_params *params) +{ + uint32_t *ints = (uint32_t *)ptr; + size_t pos; + size_t size = image_size; + + /* check if we have an PMECC header attached */ + for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++) + if (ints[pos] >> 28 != 0xC) + break; + + if (pos == ARRAY_SIZE(nand_pmecc_header)) { + ints += ARRAY_SIZE(nand_pmecc_header); + size -= sizeof(nand_pmecc_header); + } + + /* check the seven interrupt vectors of binary */ + for (pos = 0; pos < 7; pos++) { + debug("atmelimage: interrupt vector #%d is 0x%08X\n", pos+1, + ints[pos]); + /* + * all vectors except the 6'th one must contain valid + * LDR or B Opcode + */ + if (pos == 5) + /* 6'th vector has image size set, check later */ + continue; + if ((ints[pos] & 0xff000000) == 0xea000000) + /* valid B Opcode */ + continue; + if ((ints[pos] & 0xfffff000) == 0xe59ff000) + /* valid LDR (I=0, P=1, U=1, B=0, W=0, L=1) */ + continue; + /* ouch, one of the checks has missed ... */ + return 1; + } + + return ints[5] != cpu_to_le32(size); +} + +static void atmel_print_pmecc_header(const uint32_t word) +{ + int val; + + printf("\t\tPMECC header\n"); + + printf("\t\t====================\n"); + + val = (word >> 18) & 0x1ff; + printf("\t\teccOffset: %9i\n", val); + + val = (((word >> 16) & 0x3) == 0) ? 512 : 1024; + printf("\t\tsectorSize: %8i\n", val); + + if (((word >> 13) & 0x7) <= 2) + val = (2 << ((word >> 13) & 0x7)); + else + val = (12 << (((word >> 13) & 0x7) - 3)); + printf("\t\teccBitReq: %9i\n", val); + + val = (word >> 4) & 0x1ff; + printf("\t\tspareSize: %9i\n", val); + + val = (1 << ((word >> 1) & 0x3)); + printf("\t\tnbSectorPerPage: %3i\n", val); + + printf("\t\tusePmecc: %10i\n", word & 0x1); + printf("\t\t====================\n"); +} + +static void atmel_print_header(const void *ptr) +{ + uint32_t *ints = (uint32_t *)ptr; + size_t pos; + + /* check if we have an PMECC header attached */ + for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++) + if (ints[pos] >> 28 != 0xC) + break; + + if (pos == ARRAY_SIZE(nand_pmecc_header)) { + printf("Image Type:\tATMEL ROM-Boot Image with PMECC Header\n"); + atmel_print_pmecc_header(ints[0]); + pos += 5; + } else { + printf("Image Type:\tATMEL ROM-Boot Image without PMECC Header\n"); + pos = 5; + } + printf("\t\t6'th vector has %u set\n", le32_to_cpu(ints[pos])); +} + +static void atmel_set_header(void *ptr, struct stat *sbuf, int ifd, + struct image_tool_params *params) +{ + /* just save the image size into 6'th interrupt vector */ + uint32_t *ints = (uint32_t *)ptr; + size_t cnt; + size_t pos = 5; + size_t size = sbuf->st_size; + + for (cnt = 0; cnt < ARRAY_SIZE(nand_pmecc_header); cnt++) + if (ints[cnt] >> 28 != 0xC) + break; + + if (cnt == ARRAY_SIZE(nand_pmecc_header)) { + pos += ARRAY_SIZE(nand_pmecc_header); + size -= sizeof(nand_pmecc_header); + } + + ints[pos] = cpu_to_le32(size); +} + +static int atmel_check_params(struct image_tool_params *params) +{ + if (strlen(params->imagename) > 0) + if (atmel_parse_pmecc_params(params->imagename)) + return EXIT_FAILURE; + + return !(!params->eflag && + !params->fflag && + !params->xflag && + ((params->dflag && !params->lflag) || + (params->lflag && !params->dflag))); +} + +static int atmel_vrec_header(struct image_tool_params *params, + struct image_type_params *tparams) +{ + uint32_t tmp; + size_t pos; + + if (strlen(params->imagename) == 0) + return EXIT_SUCCESS; + + tmp = 0xC << 28; + + tmp |= (pmecc.ecc_offset & 0x1ff) << 18; + + switch (pmecc.sector_size) { + case 512: + tmp |= 0 << 16; + break; + case 1024: + tmp |= 1 << 16; + break; + + default: + pr_err("Wrong sectorSize (%i) for PMECC header\n", + pmecc.sector_size); + return EXIT_FAILURE; + } + + switch (pmecc.ecc_bits) { + case 2: + tmp |= 0 << 13; + break; + case 4: + tmp |= 1 << 13; + break; + case 8: + tmp |= 2 << 13; + break; + case 12: + tmp |= 3 << 13; + break; + case 24: + tmp |= 4 << 13; + break; + + default: + pr_err("Wrong eccBits (%i) for PMECC header\n", + pmecc.ecc_bits); + return EXIT_FAILURE; + } + + tmp |= (pmecc.spare_size & 0x1ff) << 4; + + switch (pmecc.sector_per_page) { + case 1: + tmp |= 0 << 1; + break; + case 2: + tmp |= 1 << 1; + break; + case 4: + tmp |= 2 << 1; + break; + case 8: + tmp |= 3 << 1; + break; + + default: + pr_err("Wrong sectorPerPage (%i) for PMECC header\n", + pmecc.sector_per_page); + return EXIT_FAILURE; + } + + if (pmecc.use_pmecc) + tmp |= 1; + + for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++) + nand_pmecc_header[pos] = tmp; + + debug("PMECC header filled 52 times with 0x%08X\n", tmp); + + tparams->header_size = sizeof(nand_pmecc_header); + tparams->hdr = nand_pmecc_header; + + return EXIT_SUCCESS; +} + +static struct image_type_params atmelimage_params = { + .name = "ATMEL ROM-Boot Image support", + .header_size = 0, + .hdr = NULL, + .check_image_type = atmel_check_image_type, + .verify_header = atmel_verify_header, + .print_header = atmel_print_header, + .set_header = atmel_set_header, + .check_params = atmel_check_params, + .vrec_header = atmel_vrec_header, +}; + +void init_atmel_image_type(void) +{ + register_image_type(&atmelimage_params); +} diff --git a/tools/imagetool.c b/tools/imagetool.c index da72115..32d6278 100644 --- a/tools/imagetool.c +++ b/tools/imagetool.c @@ -27,6 +27,8 @@ void register_image_tool(imagetool_register_t image_register) */ register_func = image_register; + /* Init ATMEL ROM Boot Image generation/list support */ + init_atmel_image_type(); /* Init Freescale PBL Boot image generation/list support */ init_pbl_image_type(); /* Init Kirkwood Boot image generation/list support */ diff --git a/tools/imagetool.h b/tools/imagetool.h index a3e9d30..c480687 100644 --- a/tools/imagetool.h +++ b/tools/imagetool.h @@ -159,6 +159,7 @@ void register_image_type(struct image_type_params *tparams); * Supported image types init functions */ void init_default_image_type(void); +void init_atmel_image_type(void); void init_pbl_image_type(void); void init_ais_image_type(void); void init_kwb_image_type(void); diff --git a/tools/mksunxiboot.c b/tools/mksunxiboot.c new file mode 100644 index 0000000..da7c9f0 --- /dev/null +++ b/tools/mksunxiboot.c @@ -0,0 +1,142 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * a simple tool to generate bootable image for sunxi platform. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <fcntl.h> +#include <stdio.h> +#include <unistd.h> +#include <stdlib.h> +#include <string.h> +#include <errno.h> +#include <sys/types.h> +#include <sys/stat.h> + +/* boot head definition from sun4i boot code */ +struct boot_file_head { + uint32_t b_instruction; /* one intruction jumping to real code */ + uint8_t magic[8]; /* ="eGON.BT0" or "eGON.BT1", not C-style str */ + uint32_t check_sum; /* generated by PC */ + uint32_t length; /* generated by PC */ + /* + * We use a simplified header, only filling in what is needed + * by the boot ROM. To be compatible with Allwinner tools we + * would need to implement the proper fields here instead of + * padding. + */ + uint8_t pad[12]; /* align to 32 bytes */ +}; + +#define BOOT0_MAGIC "eGON.BT0" +#define STAMP_VALUE 0x5F0A6C39 + +/* check sum functon from sun4i boot code */ +int gen_check_sum(struct boot_file_head *head_p) +{ + uint32_t length; + uint32_t *buf; + uint32_t loop; + uint32_t i; + uint32_t sum; + + length = head_p->length; + if ((length & 0x3) != 0) /* must 4-byte-aligned */ + return -1; + buf = (uint32_t *)head_p; + head_p->check_sum = STAMP_VALUE; /* fill stamp */ + loop = length >> 2; + + /* calculate the sum */ + for (i = 0, sum = 0; i < loop; i++) + sum += buf[i]; + + /* write back check sum */ + head_p->check_sum = sum; + + return 0; +} + +#define ALIGN(x, a) __ALIGN_MASK((x), (typeof(x))(a)-1) +#define __ALIGN_MASK(x, mask) (((x)+(mask))&~(mask)) + +#define SUN4I_SRAM_SIZE 0x7600 /* 0x7748+ is used by BROM */ +#define SRAM_LOAD_MAX_SIZE (SUN4I_SRAM_SIZE - sizeof(struct boot_file_head)) +#define BLOCK_SIZE 512 + +struct boot_img { + struct boot_file_head header; + char code[SRAM_LOAD_MAX_SIZE]; + char pad[BLOCK_SIZE]; +}; + +int main(int argc, char *argv[]) +{ + int fd_in, fd_out; + struct boot_img img; + unsigned file_size, load_size; + int count; + + if (argc < 2) { + printf("\tThis program makes an input bin file to sun4i " \ + "bootable image.\n" \ + "\tUsage: %s input_file out_putfile\n", argv[0]); + return EXIT_FAILURE; + } + + fd_in = open(argv[1], O_RDONLY); + if (fd_in < 0) { + perror("Open input file"); + return EXIT_FAILURE; + } + + memset(img.pad, 0, BLOCK_SIZE); + + /* get input file size */ + file_size = lseek(fd_in, 0, SEEK_END); + + if (file_size > SRAM_LOAD_MAX_SIZE) { + fprintf(stderr, "ERROR: File too large!\n"); + return EXIT_FAILURE; + } else { + load_size = ALIGN(file_size, sizeof(int)); + } + + fd_out = open(argv[2], O_WRONLY | O_CREAT, 0666); + if (fd_out < 0) { + perror("Open output file"); + return EXIT_FAILURE; + } + + /* read file to buffer to calculate checksum */ + lseek(fd_in, 0, SEEK_SET); + count = read(fd_in, img.code, load_size); + if (count != load_size) { + perror("Reading input image"); + return EXIT_FAILURE; + } + + /* fill the header */ + img.header.b_instruction = /* b instruction */ + 0xEA000000 | /* jump to the first instr after the header */ + ((sizeof(struct boot_file_head) / sizeof(int) - 2) + & 0x00FFFFFF); + memcpy(img.header.magic, BOOT0_MAGIC, 8); /* no '0' termination */ + img.header.length = + ALIGN(load_size + sizeof(struct boot_file_head), BLOCK_SIZE); + gen_check_sum(&img.header); + + count = write(fd_out, &img, img.header.length); + if (count != img.header.length) { + perror("Writing output"); + return EXIT_FAILURE; + } + + close(fd_in); + close(fd_out); + + return EXIT_SUCCESS; +} |