diff options
44 files changed, 1213 insertions, 155 deletions
diff --git a/arch/x86/lib/board.c b/arch/x86/lib/board.c index 452e5d8..f372898 100644 --- a/arch/x86/lib/board.c +++ b/arch/x86/lib/board.c @@ -164,13 +164,13 @@ init_fnc_t *init_sequence_r[] = { #ifndef CONFIG_SYS_NO_FLASH flash_init_r, #endif -#ifdef CONFIG_SPI - init_func_spi; -#endif - env_relocate_r, #ifdef CONFIG_PCI pci_init_r, #endif +#ifdef CONFIG_SPI + init_func_spi, +#endif + env_relocate_r, stdio_init, jumptable_init_r, console_init_r, diff --git a/board/chromebook-x86/dts/link.dts b/board/chromebook-x86/dts/link.dts index ae8217d..d0738cb 100644 --- a/board/chromebook-x86/dts/link.dts +++ b/board/chromebook-x86/dts/link.dts @@ -21,4 +21,15 @@ chosen { }; memory { device_type = "memory"; reg = <0 0>; }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ich9"; + spi-flash@0 { + reg = <0>; + compatible = "winbond,w25q64", "spi-flash"; + memory-map = <0xff800000 0x00800000>; + }; + }; }; diff --git a/common/cmd_sf.c b/common/cmd_sf.c index b175358..3f0d414 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -369,8 +369,8 @@ static void spi_test_next_stage(struct test_info *test) * @param vbuf Verification buffer * @return 0 if ok, -1 on error */ -static int spi_flash_test(struct spi_flash *flash, char *buf, ulong len, - ulong offset, char *vbuf) +static int spi_flash_test(struct spi_flash *flash, uint8_t *buf, ulong len, + ulong offset, uint8_t *vbuf) { struct test_info test; int i; @@ -431,9 +431,9 @@ static int do_spi_flash_test(int argc, char * const argv[]) { unsigned long offset; unsigned long len; - char *buf = (char *)CONFIG_SYS_TEXT_BASE; + uint8_t *buf = (uint8_t *)CONFIG_SYS_TEXT_BASE; char *endp; - char *vbuf; + uint8_t *vbuf; int ret; offset = simple_strtoul(argv[1], &endp, 16); diff --git a/drivers/mtd/spi/atmel.c b/drivers/mtd/spi/atmel.c index 006f6d5..6a92c4b 100644 --- a/drivers/mtd/spi/atmel.c +++ b/drivers/mtd/spi/atmel.c @@ -480,15 +480,13 @@ struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode) return NULL; } - asf = malloc(sizeof(struct atmel_spi_flash)); + asf = spi_flash_alloc(struct atmel_spi_flash, spi, params->name); if (!asf) { debug("SF: Failed to allocate memory\n"); return NULL; } asf->params = params; - asf->flash.spi = spi; - asf->flash.name = params->name; /* Assuming power-of-two page size initially. */ page_size = 1 << params->l2_page_size; @@ -513,7 +511,6 @@ struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode) asf->flash.erase = dataflash_erase_at45; page_size += 1 << (params->l2_page_size - 5); } else { - asf->flash.read = spi_flash_cmd_read_fast; asf->flash.write = dataflash_write_p2; asf->flash.erase = dataflash_erase_p2; } @@ -524,9 +521,6 @@ struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode) case DF_FAMILY_AT26F: case DF_FAMILY_AT26DF: - asf->flash.read = spi_flash_cmd_read_fast; - asf->flash.write = spi_flash_cmd_write_multi; - asf->flash.erase = spi_flash_cmd_erase; asf->flash.page_size = page_size; asf->flash.sector_size = 4096; /* clear SPRL# bit for locked flash */ diff --git a/drivers/mtd/spi/eon.c b/drivers/mtd/spi/eon.c index 691ed4e..b16e7ab 100644 --- a/drivers/mtd/spi/eon.c +++ b/drivers/mtd/spi/eon.c @@ -46,18 +46,12 @@ struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode) return NULL; } - flash = malloc(sizeof(*flash)); + flash = spi_flash_alloc_base(spi, params->name); if (!flash) { debug("SF: Failed to allocate memory\n"); return NULL; } - flash->spi = spi; - flash->name = params->name; - - flash->write = spi_flash_cmd_write_multi; - flash->erase = spi_flash_cmd_erase; - flash->read = spi_flash_cmd_read_fast; flash->page_size = 256; flash->sector_size = 256 * 16 * 16; flash->size = 256 * 16 diff --git a/drivers/mtd/spi/macronix.c b/drivers/mtd/spi/macronix.c index c97a39d..036c30d 100644 --- a/drivers/mtd/spi/macronix.c +++ b/drivers/mtd/spi/macronix.c @@ -97,18 +97,12 @@ struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode) return NULL; } - flash = malloc(sizeof(*flash)); + flash = spi_flash_alloc_base(spi, params->name); if (!flash) { debug("SF: Failed to allocate memory\n"); return NULL; } - flash->spi = spi; - flash->name = params->name; - - flash->write = spi_flash_cmd_write_multi; - flash->erase = spi_flash_cmd_erase; - flash->read = spi_flash_cmd_read_fast; flash->page_size = 256; flash->sector_size = 256 * 16 * 16; flash->size = flash->sector_size * params->nr_blocks; diff --git a/drivers/mtd/spi/ramtron.c b/drivers/mtd/spi/ramtron.c index 0999781..5299a6d 100644 --- a/drivers/mtd/spi/ramtron.c +++ b/drivers/mtd/spi/ramtron.c @@ -284,15 +284,13 @@ struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode) return NULL; found: - sn = malloc(sizeof(*sn)); + sn = spi_flash_alloc(struct ramtron_spi_fram, spi, params->name); if (!sn) { debug("SF: Failed to allocate memory\n"); return NULL; } sn->params = params; - sn->flash.spi = spi; - sn->flash.name = params->name; sn->flash.write = ramtron_write; sn->flash.read = ramtron_read; diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c index 9288672..bc558c4 100644 --- a/drivers/mtd/spi/spansion.c +++ b/drivers/mtd/spi/spansion.c @@ -128,18 +128,12 @@ struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode) return NULL; } - flash = malloc(sizeof(*flash)); + flash = spi_flash_alloc_base(spi, params->name); if (!flash) { debug("SF: Failed to allocate memory\n"); return NULL; } - flash->spi = spi; - flash->name = params->name; - - flash->write = spi_flash_cmd_write_multi; - flash->erase = spi_flash_cmd_erase; - flash->read = spi_flash_cmd_read_fast; flash->page_size = 256; flash->sector_size = 256 * params->pages_per_sector; flash->size = flash->sector_size * params->nr_sectors; diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 00aece9..111185a 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -8,6 +8,7 @@ */ #include <common.h> +#include <fdtdec.h> #include <malloc.h> #include <spi.h> #include <spi_flash.h> @@ -15,6 +16,8 @@ #include "spi_flash_internal.h" +DECLARE_GLOBAL_DATA_PTR; + static void spi_flash_addr(u32 addr, u8 *cmd) { /* cmd[0] is actual command */ @@ -87,6 +90,9 @@ int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset, for (actual = 0; actual < len; actual += chunk_len) { chunk_len = min(len - actual, page_size - byte_addr); + if (flash->spi->max_write_size) + chunk_len = min(chunk_len, flash->spi->max_write_size); + cmd[1] = page_addr >> 8; cmd[2] = page_addr; cmd[3] = byte_addr; @@ -111,8 +117,11 @@ int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset, if (ret) break; - page_addr++; - byte_addr = 0; + byte_addr += chunk_len; + if (byte_addr == page_size) { + page_addr++; + byte_addr = 0; + } } debug("SF: program %s %zu bytes @ %#x\n", @@ -140,6 +149,10 @@ int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset, { u8 cmd[5]; + /* Handle memory-mapped SPI */ + if (flash->memory_map) + memcpy(data, flash->memory_map + offset, len); + cmd[0] = CMD_READ_ARRAY_FAST; spi_flash_addr(offset, cmd); cmd[4] = 0x00; @@ -269,6 +282,34 @@ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr) return 0; } +#ifdef CONFIG_OF_CONTROL +int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) +{ + fdt_addr_t addr; + fdt_size_t size; + int node; + + /* If there is no node, do nothing */ + node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH); + if (node < 0) + return 0; + + addr = fdtdec_get_addr_size(blob, node, "memory-map", &size); + if (addr == FDT_ADDR_T_NONE) { + debug("%s: Cannot decode address\n", __func__); + return 0; + } + + if (flash->size != size) { + debug("%s: Memory map must cover entire device\n", __func__); + return -1; + } + flash->memory_map = (void *)addr; + + return 0; +} +#endif /* CONFIG_OF_CONTROL */ + /* * The following table holds all device probe functions * @@ -385,9 +426,18 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, goto err_manufacturer_probe; } +#ifdef CONFIG_OF_CONTROL + if (spi_flash_decode_fdt(gd->fdt_blob, flash)) { + debug("SF: FDT decode error\n"); + goto err_manufacturer_probe; + } +#endif printf("SF: Detected %s with page size ", flash->name); print_size(flash->sector_size, ", total "); - print_size(flash->size, "\n"); + print_size(flash->size, ""); + if (flash->memory_map) + printf(", mapped at %p", flash->memory_map); + puts("\n"); spi_release_bus(spi); @@ -401,6 +451,31 @@ err_claim_bus: return NULL; } +void *spi_flash_do_alloc(int offset, int size, struct spi_slave *spi, + const char *name) +{ + struct spi_flash *flash; + void *ptr; + + ptr = malloc(size); + if (!ptr) { + debug("SF: Failed to allocate memory\n"); + return NULL; + } + memset(ptr, '\0', size); + flash = (struct spi_flash *)(ptr + offset); + + /* Set up some basic fields - caller will sort out sizes */ + flash->spi = spi; + flash->name = name; + + flash->read = spi_flash_cmd_read_fast; + flash->write = spi_flash_cmd_write_multi; + flash->erase = spi_flash_cmd_erase; + + return flash; +} + void spi_flash_free(struct spi_flash *flash) { spi_free_slave(flash->spi); diff --git a/drivers/mtd/spi/sst.c b/drivers/mtd/spi/sst.c index ced4f24..95f5490 100644 --- a/drivers/mtd/spi/sst.c +++ b/drivers/mtd/spi/sst.c @@ -203,22 +203,16 @@ spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode) return NULL; } - stm = malloc(sizeof(*stm)); + stm = spi_flash_alloc(struct sst_spi_flash, spi, params->name); if (!stm) { debug("SF: Failed to allocate memory\n"); return NULL; } stm->params = params; - stm->flash.spi = spi; - stm->flash.name = params->name; if (stm->params->flags & SST_FEAT_WP) stm->flash.write = sst_write_wp; - else - stm->flash.write = spi_flash_cmd_write_multi; - stm->flash.erase = spi_flash_cmd_erase; - stm->flash.read = spi_flash_cmd_read_fast; stm->flash.page_size = 256; stm->flash.sector_size = 4096; stm->flash.size = stm->flash.sector_size * params->nr_sectors; diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c index 8a19344..2a9972b 100644 --- a/drivers/mtd/spi/stmicro.c +++ b/drivers/mtd/spi/stmicro.c @@ -176,18 +176,12 @@ struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 * idcode) return NULL; } - flash = malloc(sizeof(*flash)); + flash = spi_flash_alloc_base(spi, params->name); if (!flash) { debug("SF: Failed to allocate memory\n"); return NULL; } - flash->spi = spi; - flash->name = params->name; - - flash->write = spi_flash_cmd_write_multi; - flash->erase = spi_flash_cmd_erase; - flash->read = spi_flash_cmd_read_fast; flash->page_size = 256; flash->sector_size = 256 * params->pages_per_sector; flash->size = flash->sector_size * params->nr_sectors; diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c index 4418302..05dc644 100644 --- a/drivers/mtd/spi/winbond.c +++ b/drivers/mtd/spi/winbond.c @@ -92,18 +92,12 @@ struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode) return NULL; } - flash = malloc(sizeof(*flash)); + flash = spi_flash_alloc_base(spi, params->name); if (!flash) { debug("SF: Failed to allocate memory\n"); return NULL; } - flash->spi = spi; - flash->name = params->name; - - flash->write = spi_flash_cmd_write_multi; - flash->erase = spi_flash_cmd_erase; - flash->read = spi_flash_cmd_read_fast; flash->page_size = 256; flash->sector_size = 4096; flash->size = 4096 * 16 * params->nr_blocks; diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index b8264df..4268595 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -25,6 +25,9 @@ include $(TOPDIR)/config.mk LIB := $(obj)libspi.o +# There are many options which enable SPI, so make this library available +COBJS-y += spi.o + COBJS-$(CONFIG_ALTERA_SPI) += altera_spi.o COBJS-$(CONFIG_ANDES_SPI) += andes_spi.o COBJS-$(CONFIG_ARMADA100_SPI) += armada100_spi.o @@ -36,6 +39,7 @@ COBJS-$(CONFIG_CF_SPI) += cf_spi.o COBJS-$(CONFIG_CF_QSPI) += cf_qspi.o COBJS-$(CONFIG_DAVINCI_SPI) += davinci_spi.o COBJS-$(CONFIG_EXYNOS_SPI) += exynos_spi.o +COBJS-$(CONFIG_ICH_SPI) += ich.o COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o diff --git a/drivers/spi/altera_spi.c b/drivers/spi/altera_spi.c index 138d6f4..b53607a 100644 --- a/drivers/spi/altera_spi.c +++ b/drivers/spi/altera_spi.c @@ -83,12 +83,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!spi_cs_is_valid(bus, cs)) return NULL; - altspi = malloc(sizeof(*altspi)); + altspi = spi_alloc_slave(struct altera_spi_slave, bus, cs); if (!altspi) return NULL; - altspi->slave.bus = bus; - altspi->slave.cs = cs; altspi->base = altera_spi_base_list[bus]; debug("%s: bus:%i cs:%i base:%lx\n", __func__, bus, cs, altspi->base); diff --git a/drivers/spi/andes_spi.c b/drivers/spi/andes_spi.c index fdde139..c56377b 100644 --- a/drivers/spi/andes_spi.c +++ b/drivers/spi/andes_spi.c @@ -53,12 +53,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!spi_cs_is_valid(bus, cs)) return NULL; - ds = malloc(sizeof(*ds)); + ds = spi_alloc_slave(struct andes_spi_slave, bus, cs); if (!ds) return NULL; - ds->slave.bus = bus; - ds->slave.cs = cs; ds->regs = (struct andes_spi_regs *)CONFIG_SYS_SPI_BASE; /* diff --git a/drivers/spi/armada100_spi.c b/drivers/spi/armada100_spi.c index 7384c9c..afdbe05 100644 --- a/drivers/spi/armada100_spi.c +++ b/drivers/spi/armada100_spi.c @@ -120,12 +120,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, { struct armd_spi_slave *pss; - pss = malloc(sizeof(*pss)); + pss = spi_alloc_slave(struct armd_spi_slave, bus, cs); if (!pss) return NULL; - pss->slave.bus = bus; - pss->slave.cs = cs; pss->spi_reg = (struct ssp_reg *)SSP_REG_BASE(CONFIG_SYS_SSP_PORT); pss->cr0 = SSCR0_MOTO | SSCR0_DATASIZE(DEFAULT_WORD_LEN) | SSCR0_SSE; diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index ce7d460..f4b1bad 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -84,12 +84,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (mode & SPI_CPOL) csrx |= ATMEL_SPI_CSRx_CPOL; - as = malloc(sizeof(struct atmel_spi_slave)); + as = spi_alloc_slave(struct atmel_spi_slave, bus, cs); if (!as) return NULL; - as->slave.bus = bus; - as->slave.cs = cs; as->regs = regs; as->mr = ATMEL_SPI_MR_MSTR | ATMEL_SPI_MR_MODFDIS #if defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9M10G45) diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c index e080bec..ab2e8b9 100644 --- a/drivers/spi/bfin_spi.c +++ b/drivers/spi/bfin_spi.c @@ -182,12 +182,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, default: return NULL; } - bss = malloc(sizeof(*bss)); + bss = spi_alloc_slave(struct bfin_spi_slave, bus, cs); if (!bss) return NULL; - bss->slave.bus = bus; - bss->slave.cs = cs; bss->mmr_base = (void *)mmr_base; bss->ctl = SPE | MSTR | TDBR_CORE; if (mode & SPI_CPHA) bss->ctl |= CPHA; diff --git a/drivers/spi/bfin_spi6xx.c b/drivers/spi/bfin_spi6xx.c index fde3447..c25c4a9 100644 --- a/drivers/spi/bfin_spi6xx.c +++ b/drivers/spi/bfin_spi6xx.c @@ -178,12 +178,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, return NULL; } - bss = malloc(sizeof(*bss)); + bss = spi_alloc_slave(struct bfin_spi_slave, bus, cs); if (!bss) return NULL; - bss->slave.bus = bus; - bss->slave.cs = cs; bss->regs = (struct bfin_spi_regs *)reg_base; bss->control = SPI_CTL_EN | SPI_CTL_MSTR; if (mode & SPI_CPHA) diff --git a/drivers/spi/cf_qspi.c b/drivers/spi/cf_qspi.c index 72dd1a5..a37ac4e 100644 --- a/drivers/spi/cf_qspi.c +++ b/drivers/spi/cf_qspi.c @@ -120,13 +120,11 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!spi_cs_is_valid(bus, cs)) return NULL; - dev = malloc(sizeof(struct cf_qspi_slave)); + dev = spi_alloc_slave(struct cf_qspi_slave, bus, cs); if (!dev) return NULL; /* Initialize to known value */ - dev->slave.bus = bus; - dev->slave.cs = cs; dev->regs = (qspi_t *)MMAP_QSPI; dev->qmr = 0; dev->qwr = 0; diff --git a/drivers/spi/cf_spi.c b/drivers/spi/cf_spi.c index a883da9..afe7917 100644 --- a/drivers/spi/cf_spi.c +++ b/drivers/spi/cf_spi.c @@ -330,12 +330,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!spi_cs_is_valid(bus, cs)) return NULL; - cfslave = malloc(sizeof(struct cf_spi_slave)); + cfslave = spi_alloc_slave(struct cf_spi_slave, bus, cs); if (!cfslave) return NULL; - cfslave->slave.bus = bus; - cfslave->slave.cs = cs; cfslave->baudrate = max_hz; /* specific setup */ diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index 13aca52..74792af 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -44,12 +44,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!spi_cs_is_valid(bus, cs)) return NULL; - ds = malloc(sizeof(*ds)); + ds = spi_alloc_slave(struct davinci_spi_slave, bus, cs); if (!ds) return NULL; - ds->slave.bus = bus; - ds->slave.cs = cs; ds->regs = (struct davinci_spi_regs *)CONFIG_SYS_SPI_BASE; ds->freq = max_hz; diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c index be60ada..51b3d30 100644 --- a/drivers/spi/exynos_spi.c +++ b/drivers/spi/exynos_spi.c @@ -89,15 +89,13 @@ struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs, return NULL; } - spi_slave = malloc(sizeof(*spi_slave)); + spi_slave = spi_alloc_slave(struct exynos_spi_slave, busnum, cs); if (!spi_slave) { debug("%s: Could not allocate spi_slave\n", __func__); return NULL; } bus = &spi_bus[busnum]; - spi_slave->slave.bus = busnum; - spi_slave->slave.cs = cs; spi_slave->regs = bus->regs; spi_slave->mode = mode; spi_slave->periph_id = bus->periph_id; diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index eb99e90..28609ee 100644 --- a/drivers/spi/fsl_espi.c +++ b/drivers/spi/fsl_espi.c @@ -79,12 +79,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!spi_cs_is_valid(bus, cs)) return NULL; - fsl = malloc(sizeof(struct fsl_spi_slave)); + fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); if (!fsl) return NULL; - fsl->slave.bus = bus; - fsl->slave.cs = cs; fsl->mode = mode; fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c new file mode 100644 index 0000000..8865df5 --- /dev/null +++ b/drivers/spi/ich.c @@ -0,0 +1,754 @@ +/* + * Copyright (c) 2011-12 The Chromium OS Authors. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * This file is derived from the flashrom project. + */ + +#include <common.h> +#include <malloc.h> +#include <spi.h> +#include <pci.h> +#include <pci_ids.h> +#include <asm/io.h> + +#include "ich.h" + +#define SPI_OPCODE_WREN 0x06 +#define SPI_OPCODE_FAST_READ 0x0b + +struct ich_ctlr { + pci_dev_t dev; /* PCI device number */ + int ich_version; /* Controller version, 7 or 9 */ + int ichspi_lock; + int locked; + uint8_t *opmenu; + int menubytes; + void *base; /* Base of register set */ + uint16_t *preop; + uint16_t *optype; + uint32_t *addr; + uint8_t *data; + unsigned databytes; + uint8_t *status; + uint16_t *control; + uint32_t *bbar; + uint32_t *pr; /* only for ich9 */ + uint8_t *speed; /* pointer to speed control */ + ulong max_speed; /* Maximum bus speed in MHz */ +}; + +struct ich_ctlr ctlr; + +static inline struct ich_spi_slave *to_ich_spi(struct spi_slave *slave) +{ + return container_of(slave, struct ich_spi_slave, slave); +} + +static unsigned int ich_reg(const void *addr) +{ + return (unsigned)(addr - ctlr.base) & 0xffff; +} + +static u8 ich_readb(const void *addr) +{ + u8 value = readb(addr); + + debug("read %2.2x from %4.4x\n", value, ich_reg(addr)); + + return value; +} + +static u16 ich_readw(const void *addr) +{ + u16 value = readw(addr); + + debug("read %4.4x from %4.4x\n", value, ich_reg(addr)); + + return value; +} + +static u32 ich_readl(const void *addr) +{ + u32 value = readl(addr); + + debug("read %8.8x from %4.4x\n", value, ich_reg(addr)); + + return value; +} + +static void ich_writeb(u8 value, void *addr) +{ + writeb(value, addr); + debug("wrote %2.2x to %4.4x\n", value, ich_reg(addr)); +} + +static void ich_writew(u16 value, void *addr) +{ + writew(value, addr); + debug("wrote %4.4x to %4.4x\n", value, ich_reg(addr)); +} + +static void ich_writel(u32 value, void *addr) +{ + writel(value, addr); + debug("wrote %8.8x to %4.4x\n", value, ich_reg(addr)); +} + +static void write_reg(const void *value, void *dest, uint32_t size) +{ + memcpy_toio(dest, value, size); +} + +static void read_reg(const void *src, void *value, uint32_t size) +{ + memcpy_fromio(value, src, size); +} + +static void ich_set_bbar(struct ich_ctlr *ctlr, uint32_t minaddr) +{ + const uint32_t bbar_mask = 0x00ffff00; + uint32_t ichspi_bbar; + + minaddr &= bbar_mask; + ichspi_bbar = ich_readl(ctlr->bbar) & ~bbar_mask; + ichspi_bbar |= minaddr; + ich_writel(ichspi_bbar, ctlr->bbar); +} + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + puts("spi_cs_is_valid used but not implemented\n"); + return 0; +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct ich_spi_slave *ich; + + ich = spi_alloc_slave(struct ich_spi_slave, bus, cs); + if (!ich) { + puts("ICH SPI: Out of memory\n"); + return NULL; + } + + /* + * Yes this controller can only write a small number of bytes at + * once! The limit is typically 64 bytes. + */ + ich->slave.max_write_size = ctlr.databytes; + ich->speed = max_hz; + + return &ich->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct ich_spi_slave *ich = to_ich_spi(slave); + + free(ich); +} + +/* + * Check if this device ID matches one of supported Intel PCH devices. + * + * Return the ICH version if there is a match, or zero otherwise. + */ +static int get_ich_version(uint16_t device_id) +{ + if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC) + return 7; + + if ((device_id >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN && + device_id <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX) || + (device_id >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN && + device_id <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX)) + return 9; + + return 0; +} + +/* @return 1 if the SPI flash supports the 33MHz speed */ +static int ich9_can_do_33mhz(pci_dev_t dev) +{ + u32 fdod, speed; + + /* Observe SPI Descriptor Component Section 0 */ + pci_write_config_dword(dev, 0xb0, 0x1000); + + /* Extract the Write/Erase SPI Frequency from descriptor */ + pci_read_config_dword(dev, 0xb4, &fdod); + + /* Bits 23:21 have the fast read clock frequency, 0=20MHz, 1=33MHz */ + speed = (fdod >> 21) & 7; + + return speed == 1; +} + +static int ich_find_spi_controller(pci_dev_t *devp, int *ich_versionp) +{ + int last_bus = pci_last_busno(); + int bus; + + if (last_bus == -1) { + debug("No PCI busses?\n"); + return -1; + } + + for (bus = 0; bus <= last_bus; bus++) { + uint16_t vendor_id, device_id; + uint32_t ids; + pci_dev_t dev; + + dev = PCI_BDF(bus, 31, 0); + pci_read_config_dword(dev, 0, &ids); + vendor_id = ids; + device_id = ids >> 16; + + if (vendor_id == PCI_VENDOR_ID_INTEL) { + *devp = dev; + *ich_versionp = get_ich_version(device_id); + return 0; + } + } + + debug("ICH SPI: No ICH found.\n"); + return -1; +} + +static int ich_init_controller(struct ich_ctlr *ctlr) +{ + uint8_t *rcrb; /* Root Complex Register Block */ + uint32_t rcba; /* Root Complex Base Address */ + + pci_read_config_dword(ctlr->dev, 0xf0, &rcba); + /* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */ + rcrb = (uint8_t *)(rcba & 0xffffc000); + if (ctlr->ich_version == 7) { + struct ich7_spi_regs *ich7_spi; + + ich7_spi = (struct ich7_spi_regs *)(rcrb + 0x3020); + ctlr->ichspi_lock = ich_readw(&ich7_spi->spis) & SPIS_LOCK; + ctlr->opmenu = ich7_spi->opmenu; + ctlr->menubytes = sizeof(ich7_spi->opmenu); + ctlr->optype = &ich7_spi->optype; + ctlr->addr = &ich7_spi->spia; + ctlr->data = (uint8_t *)ich7_spi->spid; + ctlr->databytes = sizeof(ich7_spi->spid); + ctlr->status = (uint8_t *)&ich7_spi->spis; + ctlr->control = &ich7_spi->spic; + ctlr->bbar = &ich7_spi->bbar; + ctlr->preop = &ich7_spi->preop; + ctlr->base = ich7_spi; + } else if (ctlr->ich_version == 9) { + struct ich9_spi_regs *ich9_spi; + + ich9_spi = (struct ich9_spi_regs *)(rcrb + 0x3800); + ctlr->ichspi_lock = ich_readw(&ich9_spi->hsfs) & HSFS_FLOCKDN; + ctlr->opmenu = ich9_spi->opmenu; + ctlr->menubytes = sizeof(ich9_spi->opmenu); + ctlr->optype = &ich9_spi->optype; + ctlr->addr = &ich9_spi->faddr; + ctlr->data = (uint8_t *)ich9_spi->fdata; + ctlr->databytes = sizeof(ich9_spi->fdata); + ctlr->status = &ich9_spi->ssfs; + ctlr->control = (uint16_t *)ich9_spi->ssfc; + ctlr->speed = ich9_spi->ssfc + 2; + ctlr->bbar = &ich9_spi->bbar; + ctlr->preop = &ich9_spi->preop; + ctlr->pr = &ich9_spi->pr[0]; + ctlr->base = ich9_spi; + } else { + debug("ICH SPI: Unrecognized ICH version %d.\n", + ctlr->ich_version); + return -1; + } + debug("ICH SPI: Version %d detected\n", ctlr->ich_version); + + /* Work out the maximum speed we can support */ + ctlr->max_speed = 20000000; + if (ctlr->ich_version == 9 && ich9_can_do_33mhz(ctlr->dev)) + ctlr->max_speed = 33000000; + + ich_set_bbar(ctlr, 0); + + return 0; +} + +void spi_init(void) +{ + uint8_t bios_cntl; + + if (ich_find_spi_controller(&ctlr.dev, &ctlr.ich_version)) { + printf("ICH SPI: Cannot find device\n"); + return; + } + + if (ich_init_controller(&ctlr)) { + printf("ICH SPI: Cannot setup controller\n"); + return; + } + + /* + * Disable the BIOS write protect so write commands are allowed. On + * v9, deassert SMM BIOS Write Protect Disable. + */ + pci_read_config_byte(ctlr.dev, 0xdc, &bios_cntl); + if (ctlr.ich_version == 9) + bios_cntl &= ~(1 << 5); + pci_write_config_byte(ctlr.dev, 0xdc, bios_cntl | 0x1); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +void spi_cs_activate(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +static inline void spi_use_out(struct spi_trans *trans, unsigned bytes) +{ + trans->out += bytes; + trans->bytesout -= bytes; +} + +static inline void spi_use_in(struct spi_trans *trans, unsigned bytes) +{ + trans->in += bytes; + trans->bytesin -= bytes; +} + +static void spi_setup_type(struct spi_trans *trans, int data_bytes) +{ + trans->type = 0xFF; + + /* Try to guess spi type from read/write sizes. */ + if (trans->bytesin == 0) { + if (trans->bytesout + data_bytes > 4) + /* + * If bytesin = 0 and bytesout > 4, we presume this is + * a write data operation, which is accompanied by an + * address. + */ + trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS; + else + trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS; + return; + } + + if (trans->bytesout == 1) { /* and bytesin is > 0 */ + trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS; + return; + } + + if (trans->bytesout == 4) /* and bytesin is > 0 */ + trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; + + /* Fast read command is called with 5 bytes instead of 4 */ + if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) { + trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; + --trans->bytesout; + } +} + +static int spi_setup_opcode(struct spi_trans *trans) +{ + uint16_t optypes; + uint8_t opmenu[ctlr.menubytes]; + + trans->opcode = trans->out[0]; + spi_use_out(trans, 1); + if (!ctlr.ichspi_lock) { + /* The lock is off, so just use index 0. */ + ich_writeb(trans->opcode, ctlr.opmenu); + optypes = ich_readw(ctlr.optype); + optypes = (optypes & 0xfffc) | (trans->type & 0x3); + ich_writew(optypes, ctlr.optype); + return 0; + } else { + /* The lock is on. See if what we need is on the menu. */ + uint8_t optype; + uint16_t opcode_index; + + /* Write Enable is handled as atomic prefix */ + if (trans->opcode == SPI_OPCODE_WREN) + return 0; + + read_reg(ctlr.opmenu, opmenu, sizeof(opmenu)); + for (opcode_index = 0; opcode_index < ctlr.menubytes; + opcode_index++) { + if (opmenu[opcode_index] == trans->opcode) + break; + } + + if (opcode_index == ctlr.menubytes) { + printf("ICH SPI: Opcode %x not found\n", + trans->opcode); + return -1; + } + + optypes = ich_readw(ctlr.optype); + optype = (optypes >> (opcode_index * 2)) & 0x3; + if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS && + optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS && + trans->bytesout >= 3) { + /* We guessed wrong earlier. Fix it up. */ + trans->type = optype; + } + if (optype != trans->type) { + printf("ICH SPI: Transaction doesn't fit type %d\n", + optype); + return -1; + } + return opcode_index; + } +} + +static int spi_setup_offset(struct spi_trans *trans) +{ + /* Separate the SPI address and data. */ + switch (trans->type) { + case SPI_OPCODE_TYPE_READ_NO_ADDRESS: + case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS: + return 0; + case SPI_OPCODE_TYPE_READ_WITH_ADDRESS: + case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS: + trans->offset = ((uint32_t)trans->out[0] << 16) | + ((uint32_t)trans->out[1] << 8) | + ((uint32_t)trans->out[2] << 0); + spi_use_out(trans, 3); + return 1; + default: + printf("Unrecognized SPI transaction type %#x\n", trans->type); + return -1; + } +} + +/* + * Wait for up to 6s til status register bit(s) turn 1 (in case wait_til_set + * below is True) or 0. In case the wait was for the bit(s) to set - write + * those bits back, which would cause resetting them. + * + * Return the last read status value on success or -1 on failure. + */ +static int ich_status_poll(u16 bitmask, int wait_til_set) +{ + int timeout = 600000; /* This will result in 6s */ + u16 status = 0; + + while (timeout--) { + status = ich_readw(ctlr.status); + if (wait_til_set ^ ((status & bitmask) == 0)) { + if (wait_til_set) + ich_writew((status & bitmask), ctlr.status); + return status; + } + udelay(10); + } + + printf("ICH SPI: SCIP timeout, read %x, expected %x\n", + status, bitmask); + return -1; +} + +/* +int spi_xfer(struct spi_slave *slave, const void *dout, + unsigned int bitsout, void *din, unsigned int bitsin) +*/ +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct ich_spi_slave *ich = to_ich_spi(slave); + uint16_t control; + int16_t opcode_index; + int with_address; + int status; + int bytes = bitlen / 8; + struct spi_trans *trans = &ich->trans; + unsigned type = flags & (SPI_XFER_BEGIN | SPI_XFER_END); + int using_cmd = 0; + /* Align read transactions to 64-byte boundaries */ + char buff[ctlr.databytes]; + + /* Ee don't support writing partial bytes. */ + if (bitlen % 8) { + debug("ICH SPI: Accessing partial bytes not supported\n"); + return -1; + } + + /* An empty end transaction can be ignored */ + if (type == SPI_XFER_END && !dout && !din) + return 0; + + if (type & SPI_XFER_BEGIN) + memset(trans, '\0', sizeof(*trans)); + + /* Dp we need to come back later to finish it? */ + if (dout && type == SPI_XFER_BEGIN) { + if (bytes > ICH_MAX_CMD_LEN) { + debug("ICH SPI: Command length limit exceeded\n"); + return -1; + } + memcpy(trans->cmd, dout, bytes); + trans->cmd_len = bytes; + debug("ICH SPI: Saved %d bytes\n", bytes); + return 0; + } + + /* + * We process a 'middle' spi_xfer() call, which has no + * SPI_XFER_BEGIN/END, as an independent transaction as if it had + * an end. We therefore repeat the command. This is because ICH + * seems to have no support for this, or because interest (in digging + * out the details and creating a special case in the code) is low. + */ + if (trans->cmd_len) { + trans->out = trans->cmd; + trans->bytesout = trans->cmd_len; + using_cmd = 1; + debug("ICH SPI: Using %d bytes\n", trans->cmd_len); + } else { + trans->out = dout; + trans->bytesout = dout ? bytes : 0; + } + + trans->in = din; + trans->bytesin = din ? bytes : 0; + + /* There has to always at least be an opcode. */ + if (!trans->bytesout) { + debug("ICH SPI: No opcode for transfer\n"); + return -1; + } + + if (ich_status_poll(SPIS_SCIP, 0) == -1) + return -1; + + ich_writew(SPIS_CDS | SPIS_FCERR, ctlr.status); + + spi_setup_type(trans, using_cmd ? bytes : 0); + opcode_index = spi_setup_opcode(trans); + if (opcode_index < 0) + return -1; + with_address = spi_setup_offset(trans); + if (with_address < 0) + return -1; + + if (trans->opcode == SPI_OPCODE_WREN) { + /* + * Treat Write Enable as Atomic Pre-Op if possible + * in order to prevent the Management Engine from + * issuing a transaction between WREN and DATA. + */ + if (!ctlr.ichspi_lock) + ich_writew(trans->opcode, ctlr.preop); + return 0; + } + + if (ctlr.speed && ctlr.max_speed >= 33000000) { + int byte; + + byte = ich_readb(ctlr.speed); + if (ich->speed >= 33000000) + byte |= SSFC_SCF_33MHZ; + else + byte &= ~SSFC_SCF_33MHZ; + ich_writeb(byte, ctlr.speed); + } + + /* See if we have used up the command data */ + if (using_cmd && dout && bytes) { + trans->out = dout; + trans->bytesout = bytes; + debug("ICH SPI: Moving to data, %d bytes\n", bytes); + } + + /* Preset control fields */ + control = ich_readw(ctlr.control); + control &= ~SSFC_RESERVED; + control = SPIC_SCGO | ((opcode_index & 0x07) << 4); + + /* Issue atomic preop cycle if needed */ + if (ich_readw(ctlr.preop)) + control |= SPIC_ACS; + + if (!trans->bytesout && !trans->bytesin) { + /* SPI addresses are 24 bit only */ + if (with_address) + ich_writel(trans->offset & 0x00FFFFFF, ctlr.addr); + + /* + * This is a 'no data' command (like Write Enable), its + * bitesout size was 1, decremented to zero while executing + * spi_setup_opcode() above. Tell the chip to send the + * command. + */ + ich_writew(control, ctlr.control); + + /* wait for the result */ + status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); + if (status == -1) + return -1; + + if (status & SPIS_FCERR) { + debug("ICH SPI: Command transaction error\n"); + return -1; + } + + return 0; + } + + /* + * Check if this is a write command atempting to transfer more bytes + * than the controller can handle. Iterations for writes are not + * supported here because each SPI write command needs to be preceded + * and followed by other SPI commands, and this sequence is controlled + * by the SPI chip driver. + */ + if (trans->bytesout > ctlr.databytes) { + debug("ICH SPI: Too much to write. This should be prevented by the driver's max_write_size?\n"); + return -1; + } + + /* + * Read or write up to databytes bytes at a time until everything has + * been sent. + */ + while (trans->bytesout || trans->bytesin) { + uint32_t data_length; + uint32_t aligned_offset; + uint32_t diff; + + aligned_offset = trans->offset & ~(ctlr.databytes - 1); + diff = trans->offset - aligned_offset; + + /* SPI addresses are 24 bit only */ + ich_writel(aligned_offset & 0x00FFFFFF, ctlr.addr); + + if (trans->bytesout) + data_length = min(trans->bytesout, ctlr.databytes); + else + data_length = min(trans->bytesin, ctlr.databytes); + + /* Program data into FDATA0 to N */ + if (trans->bytesout) { + write_reg(trans->out, ctlr.data, data_length); + spi_use_out(trans, data_length); + if (with_address) + trans->offset += data_length; + } + + /* Add proper control fields' values */ + control &= ~((ctlr.databytes - 1) << 8); + control |= SPIC_DS; + control |= (data_length - 1) << 8; + + /* write it */ + ich_writew(control, ctlr.control); + + /* Wait for Cycle Done Status or Flash Cycle Error. */ + status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); + if (status == -1) + return -1; + + if (status & SPIS_FCERR) { + debug("ICH SPI: Data transaction error\n"); + return -1; + } + + if (trans->bytesin) { + if (diff) { + data_length -= diff; + read_reg(ctlr.data, buff, ctlr.databytes); + memcpy(trans->in, buff + diff, data_length); + } else { + read_reg(ctlr.data, trans->in, data_length); + } + spi_use_in(trans, data_length); + if (with_address) + trans->offset += data_length; + } + } + + /* Clear atomic preop now that xfer is done */ + ich_writew(0, ctlr.preop); + + return 0; +} + + +/* + * This uses the SPI controller from the Intel Cougar Point and Panther Point + * PCH to write-protect portions of the SPI flash until reboot. The changes + * don't actually take effect until the HSFS[FLOCKDN] bit is set, but that's + * done elsewhere. + */ +int spi_write_protect_region(uint32_t lower_limit, uint32_t length, int hint) +{ + uint32_t tmplong; + uint32_t upper_limit; + + if (!ctlr.pr) { + printf("%s: operation not supported on this chipset\n", + __func__); + return -1; + } + + if (length == 0 || + lower_limit > (0xFFFFFFFFUL - length) + 1 || + hint < 0 || hint > 4) { + printf("%s(0x%x, 0x%x, %d): invalid args\n", __func__, + lower_limit, length, hint); + return -1; + } + + upper_limit = lower_limit + length - 1; + + /* + * Determine bits to write, as follows: + * 31 Write-protection enable (includes erase operation) + * 30:29 reserved + * 28:16 Upper Limit (FLA address bits 24:12, with 11:0 == 0xfff) + * 15 Read-protection enable + * 14:13 reserved + * 12:0 Lower Limit (FLA address bits 24:12, with 11:0 == 0x000) + */ + tmplong = 0x80000000 | + ((upper_limit & 0x01fff000) << 4) | + ((lower_limit & 0x01fff000) >> 12); + + printf("%s: writing 0x%08x to %p\n", __func__, tmplong, + &ctlr.pr[hint]); + ctlr.pr[hint] = tmplong; + + return 0; +} diff --git a/drivers/spi/ich.h b/drivers/spi/ich.h new file mode 100644 index 0000000..bd7bc12 --- /dev/null +++ b/drivers/spi/ich.h @@ -0,0 +1,143 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * This file is derived from the flashrom project. + */ + +struct ich7_spi_regs { + uint16_t spis; + uint16_t spic; + uint32_t spia; + uint64_t spid[8]; + uint64_t _pad; + uint32_t bbar; + uint16_t preop; + uint16_t optype; + uint8_t opmenu[8]; +} __packed; + +struct ich9_spi_regs { + uint32_t bfpr; /* 0x00 */ + uint16_t hsfs; + uint16_t hsfc; + uint32_t faddr; + uint32_t _reserved0; + uint32_t fdata[16]; /* 0x10 */ + uint32_t frap; /* 0x50 */ + uint32_t freg[5]; + uint32_t _reserved1[3]; + uint32_t pr[5]; /* 0x74 */ + uint32_t _reserved2[2]; + uint8_t ssfs; /* 0x90 */ + uint8_t ssfc[3]; + uint16_t preop; /* 0x94 */ + uint16_t optype; + uint8_t opmenu[8]; /* 0x98 */ + uint32_t bbar; + uint8_t _reserved3[12]; + uint32_t fdoc; + uint32_t fdod; + uint8_t _reserved4[8]; + uint32_t afc; + uint32_t lvscc; + uint32_t uvscc; + uint8_t _reserved5[4]; + uint32_t fpb; + uint8_t _reserved6[28]; + uint32_t srdl; + uint32_t srdc; + uint32_t srd; +} __packed; + +enum { + SPIS_SCIP = 0x0001, + SPIS_GRANT = 0x0002, + SPIS_CDS = 0x0004, + SPIS_FCERR = 0x0008, + SSFS_AEL = 0x0010, + SPIS_LOCK = 0x8000, + SPIS_RESERVED_MASK = 0x7ff0, + SSFS_RESERVED_MASK = 0x7fe2 +}; + +enum { + SPIC_SCGO = 0x000002, + SPIC_ACS = 0x000004, + SPIC_SPOP = 0x000008, + SPIC_DBC = 0x003f00, + SPIC_DS = 0x004000, + SPIC_SME = 0x008000, + SSFC_SCF_MASK = 0x070000, + SSFC_RESERVED = 0xf80000, + + /* Mask for speed byte, biuts 23:16 of SSFC */ + SSFC_SCF_33MHZ = 0x01, +}; + +enum { + HSFS_FDONE = 0x0001, + HSFS_FCERR = 0x0002, + HSFS_AEL = 0x0004, + HSFS_BERASE_MASK = 0x0018, + HSFS_BERASE_SHIFT = 3, + HSFS_SCIP = 0x0020, + HSFS_FDOPSS = 0x2000, + HSFS_FDV = 0x4000, + HSFS_FLOCKDN = 0x8000 +}; + +enum { + HSFC_FGO = 0x0001, + HSFC_FCYCLE_MASK = 0x0006, + HSFC_FCYCLE_SHIFT = 1, + HSFC_FDBC_MASK = 0x3f00, + HSFC_FDBC_SHIFT = 8, + HSFC_FSMIE = 0x8000 +}; + +enum { + SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0, + SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1, + SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2, + SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3 +}; + +enum { + ICH_MAX_CMD_LEN = 5, +}; + +struct spi_trans { + uint8_t cmd[ICH_MAX_CMD_LEN]; + int cmd_len; + const uint8_t *out; + uint32_t bytesout; + uint8_t *in; + uint32_t bytesin; + uint8_t type; + uint8_t opcode; + uint32_t offset; +}; + +struct ich_spi_slave { + struct spi_slave slave; + struct spi_trans trans; /* current transaction in progress */ + int speed; /* SPI speed in Hz */ +}; diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c index de81064..caa91e3 100644 --- a/drivers/spi/kirkwood_spi.c +++ b/drivers/spi/kirkwood_spi.c @@ -49,13 +49,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!spi_cs_is_valid(bus, cs)) return NULL; - slave = malloc(sizeof(struct spi_slave)); + slave = spi_alloc_slave_base(bus, cs); if (!slave) return NULL; - slave->bus = bus; - slave->cs = cs; - writel(~KWSPI_CSN_ACT | KWSPI_SMEMRDY, &spireg->ctrl); /* calculate spi clock prescaller using max_hz */ diff --git a/drivers/spi/mpc52xx_spi.c b/drivers/spi/mpc52xx_spi.c index 3e96b3f..4b50bca 100644 --- a/drivers/spi/mpc52xx_spi.c +++ b/drivers/spi/mpc52xx_spi.c @@ -48,13 +48,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, { struct spi_slave *slave; - slave = malloc(sizeof(struct spi_slave)); + slave = spi_alloc_slave_base(bus, cs); if (!slave) return NULL; - slave->bus = bus; - slave->cs = cs; - return slave; } diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c index 4e46041..6b0e3b4 100644 --- a/drivers/spi/mpc8xxx_spi.c +++ b/drivers/spi/mpc8xxx_spi.c @@ -45,13 +45,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!spi_cs_is_valid(bus, cs)) return NULL; - slave = malloc(sizeof(struct spi_slave)); + slave = spi_alloc_slave_base(bus, cs); if (!slave) return NULL; - slave->bus = bus; - slave->cs = cs; - /* * TODO: Some of the code in spi_init() should probably move * here, or into spi_claim_bus() below. diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index 859c43f..d792d8d 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -408,7 +408,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (bus >= ARRAY_SIZE(spi_bases)) return NULL; - mxcs = calloc(sizeof(struct mxc_spi_slave), 1); + mxcs = spi_alloc_slave(struct mxc_spi_slave, bus, cs); if (!mxcs) { puts("mxc_spi: SPI Slave not allocated !\n"); return NULL; @@ -424,8 +424,6 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, cs = ret; - mxcs->slave.bus = bus; - mxcs->slave.cs = cs; mxcs->base = spi_bases[bus]; ret = spi_cfg_mxc(mxcs, cs, max_hz, mode); diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c index ffa3c1d..aa999f9 100644 --- a/drivers/spi/mxs_spi.c +++ b/drivers/spi/mxs_spi.c @@ -77,15 +77,13 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, return NULL; } - mxs_slave = calloc(sizeof(struct mxs_spi_slave), 1); + mxs_slave = spi_alloc_slave(struct mxs_spi_slave, bus, cs); if (!mxs_slave) return NULL; if (mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + bus)) goto err_init; - mxs_slave->slave.bus = bus; - mxs_slave->slave.cs = cs; mxs_slave->max_khz = max_hz / 1000; mxs_slave->mode = mode; mxs_slave->regs = mxs_ssp_regs_by_bus(bus); diff --git a/drivers/spi/oc_tiny_spi.c b/drivers/spi/oc_tiny_spi.c index fc01fb8..6f7b1ed 100644 --- a/drivers/spi/oc_tiny_spi.c +++ b/drivers/spi/oc_tiny_spi.c @@ -90,13 +90,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!spi_cs_is_valid(bus, cs) || gpio_request(cs, "tiny_spi")) return NULL; - tiny_spi = malloc(sizeof(*tiny_spi)); + tiny_spi = spi_alloc_slave(struct tiny_spi_slave, bus, cs); if (!tiny_spi) return NULL; - memset(tiny_spi, 0, sizeof(*tiny_spi)); - tiny_spi->slave.bus = bus; - tiny_spi->slave.cs = cs; tiny_spi->host = &tiny_spi_host_list[bus]; tiny_spi->mode = mode & (SPI_CPOL | SPI_CPHA); tiny_spi->flg = mode & SPI_CS_HIGH ? 1 : 0; diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c index 344d5b8..80a4e47 100644 --- a/drivers/spi/omap3_spi.c +++ b/drivers/spi/omap3_spi.c @@ -80,12 +80,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { struct omap3_spi_slave *ds; - - ds = malloc(sizeof(struct omap3_spi_slave)); - if (!ds) { - printf("SPI error: malloc of SPI structure failed\n"); - return NULL; - } + struct mcspi *regs; /* * OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules) @@ -98,21 +93,21 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, switch (bus) { case 0: - ds->regs = (struct mcspi *)OMAP3_MCSPI1_BASE; + regs = (struct mcspi *)OMAP3_MCSPI1_BASE; break; #ifdef OMAP3_MCSPI2_BASE case 1: - ds->regs = (struct mcspi *)OMAP3_MCSPI2_BASE; + regs = (struct mcspi *)OMAP3_MCSPI2_BASE; break; #endif #ifdef OMAP3_MCSPI3_BASE case 2: - ds->regs = (struct mcspi *)OMAP3_MCSPI3_BASE; + regs = (struct mcspi *)OMAP3_MCSPI3_BASE; break; #endif #ifdef OMAP3_MCSPI4_BASE case 3: - ds->regs = (struct mcspi *)OMAP3_MCSPI4_BASE; + regs = (struct mcspi *)OMAP3_MCSPI4_BASE; break; #endif default: @@ -120,7 +115,6 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, Supported busses 0 - 3\n", bus); return NULL; } - ds->slave.bus = bus; if (((bus == 0) && (cs > 3)) || ((bus == 1) && (cs > 1)) || @@ -130,19 +124,26 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, on bus %i\n", cs, bus); return NULL; } - ds->slave.cs = cs; if (max_hz > OMAP3_MCSPI_MAX_FREQ) { printf("SPI error: unsupported frequency %i Hz. \ Max frequency is 48 Mhz\n", max_hz); return NULL; } - ds->freq = max_hz; if (mode > SPI_MODE_3) { printf("SPI error: unsupported SPI mode %i\n", mode); return NULL; } + + ds = spi_alloc_slave(struct omap3_spi_slave, bus, cs); + if (!ds) { + printf("SPI error: malloc of SPI structure failed\n"); + return NULL; + } + + ds->regs = regs; + ds->freq = max_hz; ds->mode = mode; return &ds->slave; diff --git a/drivers/spi/sh_spi.c b/drivers/spi/sh_spi.c index e944b23..744afe3 100644 --- a/drivers/spi/sh_spi.c +++ b/drivers/spi/sh_spi.c @@ -103,12 +103,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!spi_cs_is_valid(bus, cs)) return NULL; - ss = malloc(sizeof(struct spi_slave)); + ss = spi_alloc_slave(struct sh_spi, bus, cs); if (!ss) return NULL; - ss->slave.bus = bus; - ss->slave.cs = cs; ss->regs = (struct sh_spi_regs *)CONFIG_SH_SPI_BASE; /* SPI sycle stop */ diff --git a/drivers/spi/soft_spi.c b/drivers/spi/soft_spi.c index 13df8cb..a1b84b6 100644 --- a/drivers/spi/soft_spi.c +++ b/drivers/spi/soft_spi.c @@ -73,12 +73,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!spi_cs_is_valid(bus, cs)) return NULL; - ss = malloc(sizeof(struct soft_spi_slave)); + ss = spi_alloc_slave(struct soft_spi_slave, bus, cs); if (!ss) return NULL; - ss->slave.bus = bus; - ss->slave.cs = cs; ss->mode = mode; /* TODO: Use max_hz to limit the SCK rate */ diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c new file mode 100644 index 0000000..cb36c5e --- /dev/null +++ b/drivers/spi/spi.c @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <spi.h> + +void *spi_do_alloc_slave(int offset, int size, unsigned int bus, + unsigned int cs) +{ + struct spi_slave *slave; + void *ptr; + + ptr = malloc(size); + if (ptr) { + memset(ptr, '\0', size); + slave = (struct spi_slave *)(ptr + offset); + slave->bus = bus; + slave->cs = cs; + } + + return ptr; +} diff --git a/drivers/spi/tegra_slink.c b/drivers/spi/tegra_slink.c index 2c41fab..9da5877 100644 --- a/drivers/spi/tegra_slink.c +++ b/drivers/spi/tegra_slink.c @@ -81,13 +81,11 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, return NULL; } - spi = malloc(sizeof(struct tegra_spi_slave)); + spi = spi_alloc_slave(struct tegra_spi_slave, bus, cs); if (!spi) { printf("SPI error: malloc of SPI structure failed\n"); return NULL; } - spi->slave.bus = bus; - spi->slave.cs = cs; spi->ctrl = &spi_ctrls[bus]; if (!spi->ctrl) { printf("SPI error: could not find controller for bus %d\n", diff --git a/drivers/spi/tegra_spi.c b/drivers/spi/tegra_spi.c index ce19095..05027af 100644 --- a/drivers/spi/tegra_spi.c +++ b/drivers/spi/tegra_spi.c @@ -81,13 +81,11 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, return NULL; } - spi = malloc(sizeof(struct tegra_spi_slave)); + spi = spi_alloc_slave(struct tegra_spi_slave, bus, cs); if (!spi) { printf("SPI error: malloc of SPI structure failed\n"); return NULL; } - spi->slave.bus = bus; - spi->slave.cs = cs; #ifdef CONFIG_OF_CONTROL int node = fdtdec_next_compatible(gd->fdt_blob, 0, COMPAT_NVIDIA_TEGRA20_SFLASH); diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index db01cc2..a82b056 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -85,14 +85,12 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, return NULL; } - xilspi = malloc(sizeof(*xilspi)); + xilspi = spi_alloc_slave(struct xilinx_spi_slave, bus, cs); if (!xilspi) { printf("XILSPI error: %s: malloc of SPI structure failed\n", __func__); return NULL; } - xilspi->slave.bus = bus; - xilspi->slave.cs = cs; xilspi->regs = (struct xilinx_spi_reg *)xilinx_spi_base_list[bus]; xilspi->freq = max_hz; xilspi->mode = mode; diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 87daf62..a4aa8f7 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -179,6 +179,8 @@ #define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SETGETDCR #define CONFIG_CMD_SOURCE +#define CONFIG_CMD_TIME +#define CONFIG_CMD_GETTIME #define CONFIG_CMD_XIMG #define CONFIG_CMD_SCSI @@ -257,10 +259,16 @@ /*----------------------------------------------------------------------- * FLASH configuration */ +#define CONFIG_ICH_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_MACRONIX +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SPI_FLASH_GIGADEVICE #define CONFIG_SYS_NO_FLASH -#undef CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_MAX_FLASH_SECT 1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_CMD_SF +#define CONFIG_CMD_SF_TEST +#define CONFIG_CMD_SPI +#define CONFIG_SPI /*----------------------------------------------------------------------- * Environment configuration diff --git a/include/fdtdec.h b/include/fdtdec.h index 2189483..3b363be 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -38,11 +38,13 @@ */ #ifdef CONFIG_PHYS_64BIT typedef u64 fdt_addr_t; +typedef u64 fdt_size_t; #define FDT_ADDR_T_NONE (-1ULL) #define fdt_addr_to_cpu(reg) be64_to_cpu(reg) #define fdt_size_to_cpu(reg) be64_to_cpu(reg) #else typedef u32 fdt_addr_t; +typedef u32 fdt_size_t; #define FDT_ADDR_T_NONE (-1U) #define fdt_addr_to_cpu(reg) be32_to_cpu(reg) #define fdt_size_to_cpu(reg) be32_to_cpu(reg) @@ -84,6 +86,7 @@ enum fdt_compat_id { COMPAT_SAMSUNG_EXYNOS_EHCI, /* Exynos EHCI controller */ COMPAT_SAMSUNG_EXYNOS_USB_PHY, /* Exynos phy controller for usb2.0 */ COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */ + COMPAT_GENERIC_SPI_FLASH, /* Generic SPI Flash chip */ COMPAT_COUNT, }; @@ -200,6 +203,19 @@ fdt_addr_t fdtdec_get_addr(const void *blob, int node, const char *prop_name); /** + * Look up an address property in a node and return it as an address. + * The property must hold one address with a length. This is only tested + * on 32-bit machines. + * + * @param blob FDT blob + * @param node node to examine + * @param prop_name name of property to find + * @return address, if found, or FDT_ADDR_T_NONE if not + */ +fdt_addr_t fdtdec_get_addr_size(const void *blob, int node, + const char *prop_name, fdt_size_t *sizep); + +/** * Look up a 32-bit integer property in a node and return it. The property * must have at least 4 bytes of data. The value of the first cell is * returned. diff --git a/include/spi.h b/include/spi.h index 60e85db..3fe2e1e 100644 --- a/include/spi.h +++ b/include/spi.h @@ -49,10 +49,13 @@ * * bus: ID of the bus that the slave is attached to. * cs: ID of the chip select connected to the slave. + * max_write_size: If non-zero, the maximum number of bytes which can + * be written at once, excluding command bytes. */ struct spi_slave { unsigned int bus; unsigned int cs; + unsigned int max_write_size; }; /*----------------------------------------------------------------------- @@ -62,6 +65,47 @@ struct spi_slave { */ void spi_init(void); +/** + * spi_do_alloc_slave - Allocate a new SPI slave (internal) + * + * Allocate and zero all fields in the spi slave, and set the bus/chip + * select. Use the helper macro spi_alloc_slave() to call this. + * + * @offset: Offset of struct spi_slave within slave structure + * @size: Size of slave structure + * @bus: Bus ID of the slave chip. + * @cs: Chip select ID of the slave chip on the specified bus. + */ +void *spi_do_alloc_slave(int offset, int size, unsigned int bus, + unsigned int cs); + +/** + * spi_alloc_slave - Allocate a new SPI slave + * + * Allocate and zero all fields in the spi slave, and set the bus/chip + * select. + * + * @_struct: Name of structure to allocate (e.g. struct tegra_spi). This + * structure must contain a member 'struct spi_slave *slave'. + * @bus: Bus ID of the slave chip. + * @cs: Chip select ID of the slave chip on the specified bus. + */ +#define spi_alloc_slave(_struct, bus, cs) \ + spi_do_alloc_slave(offsetof(_struct, slave), \ + sizeof(_struct), bus, cs) + +/** + * spi_alloc_slave_base - Allocate a new SPI slave with no private data + * + * Allocate and zero all fields in the spi slave, and set the bus/chip + * select. + * + * @bus: Bus ID of the slave chip. + * @cs: Chip select ID of the slave chip on the specified bus. + */ +#define spi_alloc_slave_base(bus, cs) \ + spi_do_alloc_slave(0, sizeof(struct spi_slave), bus, cs) + /*----------------------------------------------------------------------- * Set up communications parameters for a SPI slave. * diff --git a/include/spi_flash.h b/include/spi_flash.h index 9da9062..3b6a44e 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -39,6 +39,7 @@ struct spi_flash { /* Erase (sector) size */ u32 sector_size; + void *memory_map; /* Address of read-only SPI flash access */ int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf); int (*write)(struct spi_flash *flash, u32 offset, @@ -47,6 +48,44 @@ struct spi_flash { size_t len); }; +/** + * spi_flash_do_alloc - Allocate a new spi flash structure + * + * The structure is allocated and cleared with default values for + * read, write and erase, which the caller can modify. The caller must set + * up size, page_size and sector_size. + * + * Use the helper macro spi_flash_alloc() to call this. + * + * @offset: Offset of struct spi_slave within slave structure + * @size: Size of slave structure + * @spi: SPI slave + * @name: Name of SPI flash device + */ +void *spi_flash_do_alloc(int offset, int size, struct spi_slave *spi, + const char *name); + +/** + * spi_flash_alloc - Allocate a new SPI flash structure + * + * @_struct: Name of structure to allocate (e.g. struct ramtron_spi_fram). This + * structure must contain a member 'struct spi_flash *flash'. + * @spi: SPI slave + * @name: Name of SPI flash device + */ +#define spi_flash_alloc(_struct, spi, name) \ + spi_flash_do_alloc(offsetof(_struct, flash), sizeof(_struct), \ + spi, name) + +/** + * spi_flash_alloc_base - Allocate a new SPI flash structure with no private data + * + * @spi: SPI slave + * @name: Name of SPI flash device + */ +#define spi_flash_alloc_base(spi, name) \ + spi_flash_do_alloc(0, sizeof(struct spi_flash), spi, name) + struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int spi_mode); void spi_flash_free(struct spi_flash *flash); diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 43f29f5..c95c2c2 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -59,6 +59,7 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(SAMSUNG_EXYNOS_EHCI, "samsung,exynos-ehci"), COMPAT(SAMSUNG_EXYNOS_USB_PHY, "samsung,exynos-usb-phy"), COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686_pmic"), + COMPAT(GENERIC_SPI_FLASH, "spi-flash"), }; const char *fdtdec_get_compatible(enum fdt_compat_id id) @@ -68,25 +69,40 @@ const char *fdtdec_get_compatible(enum fdt_compat_id id) return compat_names[id]; } -fdt_addr_t fdtdec_get_addr(const void *blob, int node, - const char *prop_name) +fdt_addr_t fdtdec_get_addr_size(const void *blob, int node, + const char *prop_name, fdt_size_t *sizep) { const fdt_addr_t *cell; int len; debug("%s: %s: ", __func__, prop_name); cell = fdt_getprop(blob, node, prop_name, &len); - if (cell && (len == sizeof(fdt_addr_t) || - len == sizeof(fdt_addr_t) * 2)) { + if (cell && ((!sizep && len == sizeof(fdt_addr_t)) || + len == sizeof(fdt_addr_t) * 2)) { fdt_addr_t addr = fdt_addr_to_cpu(*cell); - - debug("%p\n", (void *)addr); + if (sizep) { + const fdt_size_t *size; + + size = (fdt_size_t *)((char *)cell + + sizeof(fdt_addr_t)); + *sizep = fdt_size_to_cpu(*size); + debug("addr=%p, size=%p\n", (void *)addr, + (void *)*sizep); + } else { + debug("%p\n", (void *)addr); + } return addr; } debug("(not found)\n"); return FDT_ADDR_T_NONE; } +fdt_addr_t fdtdec_get_addr(const void *blob, int node, + const char *prop_name) +{ + return fdtdec_get_addr_size(blob, node, prop_name, NULL); +} + s32 fdtdec_get_int(const void *blob, int node, const char *prop_name, s32 default_val) { |