diff options
| -rw-r--r-- | board/siemens/draco/Makefile (renamed from board/siemens/dxr2/Makefile) | 0 | ||||
| -rw-r--r-- | board/siemens/draco/board.c (renamed from board/siemens/dxr2/board.c) | 71 | ||||
| -rw-r--r-- | board/siemens/draco/board.h (renamed from board/siemens/dxr2/board.h) | 2 | ||||
| -rw-r--r-- | board/siemens/draco/mux.c (renamed from board/siemens/dxr2/mux.c) | 2 | ||||
| -rw-r--r-- | boards.cfg | 2 |
5 files changed, 38 insertions, 39 deletions
diff --git a/board/siemens/dxr2/Makefile b/board/siemens/draco/Makefile index f159932..f159932 100644 --- a/board/siemens/dxr2/Makefile +++ b/board/siemens/draco/Makefile diff --git a/board/siemens/dxr2/board.c b/board/siemens/draco/board.c index e9f157a..9be2e34 100644 --- a/board/siemens/dxr2/board.c +++ b/board/siemens/draco/board.c @@ -1,5 +1,5 @@ /* - * Board functions for TI AM335X based dxr2 board + * Board functions for TI AM335X based draco board * (C) Copyright 2013 Siemens Schweiz AG * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. * @@ -37,7 +37,7 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_SPL_BUILD -static struct dxr2_baseboard_id __attribute__((section(".data"))) settings; +static struct draco_baseboard_id __attribute__((section(".data"))) settings; #if DDR_PLL_FREQ == 303 /* Default@303MHz-i0 */ @@ -138,11 +138,10 @@ static int read_eeprom(void) set_default_ddr3_timings(); } - if (MAGIC_CHIP == settings.chip.magic) { + if (MAGIC_CHIP == settings.chip.magic) print_chip_data(); - } else { + else printf("Warning: No chip data in eeprom\n"); - } print_ddr3_timings(); #endif @@ -152,48 +151,48 @@ static int read_eeprom(void) #ifdef CONFIG_SPL_BUILD static void board_init_ddr(void) { -struct emif_regs dxr2_ddr3_emif_reg_data = { +struct emif_regs draco_ddr3_emif_reg_data = { .zq_config = 0x50074BE4, }; -struct ddr_data dxr2_ddr3_data = { +struct ddr_data draco_ddr3_data = { }; -struct cmd_control dxr2_ddr3_cmd_ctrl_data = { +struct cmd_control draco_ddr3_cmd_ctrl_data = { }; -struct ctrl_ioregs dxr2_ddr3_ioregs = { +struct ctrl_ioregs draco_ddr3_ioregs = { }; /* pass values from eeprom */ - dxr2_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1; - dxr2_ddr3_emif_reg_data.sdram_tim2 = settings.ddr3.sdram_tim2; - dxr2_ddr3_emif_reg_data.sdram_tim3 = settings.ddr3.sdram_tim3; - dxr2_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 = + draco_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1; + draco_ddr3_emif_reg_data.sdram_tim2 = settings.ddr3.sdram_tim2; + draco_ddr3_emif_reg_data.sdram_tim3 = settings.ddr3.sdram_tim3; + draco_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 = settings.ddr3.emif_ddr_phy_ctlr_1; - dxr2_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config; - dxr2_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl; - - dxr2_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0; - dxr2_ddr3_data.datawdsratio0 = settings.ddr3.dt0wdsratio0; - dxr2_ddr3_data.datafwsratio0 = settings.ddr3.dt0fwsratio0; - dxr2_ddr3_data.datawrsratio0 = settings.ddr3.dt0wrsratio0; - - dxr2_ddr3_cmd_ctrl_data.cmd0csratio = settings.ddr3.ddr3_sratio; - dxr2_ddr3_cmd_ctrl_data.cmd0iclkout = settings.ddr3.iclkout; - dxr2_ddr3_cmd_ctrl_data.cmd1csratio = settings.ddr3.ddr3_sratio; - dxr2_ddr3_cmd_ctrl_data.cmd1iclkout = settings.ddr3.iclkout; - dxr2_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio; - dxr2_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout; - - dxr2_ddr3_ioregs.cm0ioctl = settings.ddr3.ioctr_val, - dxr2_ddr3_ioregs.cm1ioctl = settings.ddr3.ioctr_val, - dxr2_ddr3_ioregs.cm2ioctl = settings.ddr3.ioctr_val, - dxr2_ddr3_ioregs.dt0ioctl = settings.ddr3.ioctr_val, - dxr2_ddr3_ioregs.dt1ioctl = settings.ddr3.ioctr_val, - - config_ddr(DDR_PLL_FREQ, &dxr2_ddr3_ioregs, &dxr2_ddr3_data, - &dxr2_ddr3_cmd_ctrl_data, &dxr2_ddr3_emif_reg_data, 0); + draco_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config; + draco_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl; + + draco_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0; + draco_ddr3_data.datawdsratio0 = settings.ddr3.dt0wdsratio0; + draco_ddr3_data.datafwsratio0 = settings.ddr3.dt0fwsratio0; + draco_ddr3_data.datawrsratio0 = settings.ddr3.dt0wrsratio0; + + draco_ddr3_cmd_ctrl_data.cmd0csratio = settings.ddr3.ddr3_sratio; + draco_ddr3_cmd_ctrl_data.cmd0iclkout = settings.ddr3.iclkout; + draco_ddr3_cmd_ctrl_data.cmd1csratio = settings.ddr3.ddr3_sratio; + draco_ddr3_cmd_ctrl_data.cmd1iclkout = settings.ddr3.iclkout; + draco_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio; + draco_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout; + + draco_ddr3_ioregs.cm0ioctl = settings.ddr3.ioctr_val, + draco_ddr3_ioregs.cm1ioctl = settings.ddr3.ioctr_val, + draco_ddr3_ioregs.cm2ioctl = settings.ddr3.ioctr_val, + draco_ddr3_ioregs.dt0ioctl = settings.ddr3.ioctr_val, + draco_ddr3_ioregs.dt1ioctl = settings.ddr3.ioctr_val, + + config_ddr(DDR_PLL_FREQ, &draco_ddr3_ioregs, &draco_ddr3_data, + &draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0); } static void spl_siemens_board_init(void) diff --git a/board/siemens/dxr2/board.h b/board/siemens/draco/board.h index a59ffb0..ff8ab76 100644 --- a/board/siemens/dxr2/board.h +++ b/board/siemens/draco/board.h @@ -50,7 +50,7 @@ struct chip_data { char shwver[7]; }; -struct dxr2_baseboard_id { +struct draco_baseboard_id { struct ddr3_data ddr3; struct chip_data chip; }; diff --git a/board/siemens/dxr2/mux.c b/board/siemens/draco/mux.c index f2314b5..eaa3c70 100644 --- a/board/siemens/dxr2/mux.c +++ b/board/siemens/draco/mux.c @@ -1,5 +1,5 @@ /* - * pinmux setup for siemens dxr2 board + * pinmux setup for siemens draco board * * (C) Copyright 2013 Siemens Schweiz AG * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. @@ -260,7 +260,7 @@ Active arm armv7 am33xx compulab cm_t335 Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra <eballetbo@iseebcn.com> Active arm armv7 am33xx phytec pcm051 pcm051_rev1 pcm051:REV1 Lars Poeschel <poeschel@lemonage.de> Active arm armv7 am33xx phytec pcm051 pcm051_rev3 pcm051:REV3 Lars Poeschel <poeschel@lemonage.de> -Active arm armv7 am33xx siemens dxr2 dxr2 - Roger Meier <r.meier@siemens.com> +Active arm armv7 am33xx siemens draco dxr2 - Roger Meier <r.meier@siemens.com> Active arm armv7 am33xx siemens pxm2 pxm2 - Roger Meier <r.meier@siemens.com> Active arm armv7 am33xx siemens rut rut - Roger Meier <r.meier@siemens.com> Active arm armv7 am33xx silica pengwyn pengwyn - Lothar Felten <lothar.felten@gmail.com> |