diff options
94 files changed, 3006 insertions, 327 deletions
@@ -1,3 +1,2671 @@ +commit 84bc72d90c505fec3ef4b693995407a0bd4064e5 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Dec 11 18:39:08 2008 -0500 + + spi/stmicro: fix debug() display of cmd + + The stmicro_wait_ready() func tries to show the actual opcode that was sent + to the device, but instead it displays the array pointer. Fix it to pull + out the opcode from the start of the array. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 5b3375ac8c36c29c87abb132fede0509eb21e5c9 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Dec 11 06:23:37 2008 -0500 + + env_sf: support embedded environments + + If both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE are defined, and the sect + size is larger than the env size, then it means the env is embedded in a + block. So we have to save/restore the part of the sector which is not the + environment. Previously, saving the environment in SPI flash in this + setup would probably brick the board as the rest of the sector tends to + contain actual U-Boot data/code. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + +commit ecf5f077c8e77454f532eaac3e3afb7cfc48c62d +Author: Timur Tabi <timur@freescale.com> +Date: Wed Dec 3 11:28:30 2008 -0600 + + i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions + + All implementations of the functions i2c_reg_read() and + i2c_reg_write() are identical. We can save space and simplify the + code by converting these functions into inlines and putting them in + i2c.h. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit e39cd81c44740d7355d277ed3d38536cbe1e003d +Author: Dave Liu <daveliu@freescale.com> +Date: Fri Dec 5 15:36:14 2008 +0800 + + lib_ppc: rework the flush_cache + + - It is possible to miss flush/invalidate the last + cache line, we fix it at here. + - add the volatile and memory clobber. + + They are pointed by Scott Wood. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 63240ba88cd6a220057a0f28e5bf97f5b17ac84b +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Sat Dec 13 17:20:28 2008 -0600 + + Introduce addr_map library + + Add a library that helps in translating between virtual and physical + addresses. This library can be useful as a simple means to implement + map_physmem() and virt_to_phys() for platforms that need functionality + beyond the simple 1:1 mapping. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 65e43a10631537dcb92c302d36301a12308216c3 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Sat Dec 13 17:20:27 2008 -0600 + + Introduce virt_to_phys() + + virt_to_phys() returns the physical address given a virtual. In most + cases this will be just the input value as the vast majority of + systems run in a 1:1 mode. + + However in systems that are not running this way it should report the + physical address or ~0 if no mapping exists for the given virtual + address. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 45845301af3de8675c1f7bbc815c6de35452605a +Author: Yuri Tikhonov <yur@emcraft.com> +Date: Sun Dec 7 22:12:50 2008 +0100 + + POST Make: fix the sub-dir dependencies missing. + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 22525779cb51f1bbe4e96fea7b778de1935a5a69 +Author: Martin Michlmayr <tbm@cyrius.com> +Date: Wed Aug 6 14:44:05 2008 +0300 + + Fix a typo in fw_env.config + + Reported-by: Martin Michlmayr <tbm@cyrius.com> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit ba490b7761c62b549c222a9723e532dc801a3899 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Dec 1 16:22:45 2008 -0600 + + Remove unused CONFIG_ADDR_STREAMING defines + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit d16da93430520d3e46c1ab52eedacf36ab7a2311 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Nov 24 11:54:47 2008 -0600 + + cmd_mem: Remove unused variable + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 3aed3aa2c128ce9fb39ca3f4e9385a7499e93dbf +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sun Dec 14 10:29:39 2008 +0100 + + Fix new found CFG_ + + Also fix some minor typos. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 0e0c862efe7279e9609db74d758cd1b84c6c7209 +Author: Sergei Poselenov <sposelenov@emcraft.com> +Date: Fri Sep 19 12:07:34 2008 +0200 + + Remove compiler warning: target CPU does not support interworking + + This warning is issued by modern ARM-EABI GCC on non-thumb targets. + + Signed-off-by: Vladimir Panfilov <pvr@emcraft.com> + Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> + +commit cd6734510a9ff0f41c4a73567d4080ea0033d2c1 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Mon Nov 24 13:33:51 2008 +0100 + + Fix FIT and FDT support to have CONFIG_OF_LIBFDT and CONFIG_FIT independent + + FDT support is used for both FIT style images and for architectures + that can pass a fdt blob to an OS (ppc, m68k, sparc). + + For other architectures and boards which do not pass a fdt blob to an + OS but want to use the new uImage format, we just need FIT support. + + Now we can have the 4 following configurations : + + 1) FIT only CONFIG_FIT + 2) fdt blob only CONFIG_OF_LIBFDT + 3) both CONFIG_OF_LIBFDT & CONFIG_FIT + 4) none none + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 19ef4f7a6ef3b725aa9fe4b4f5fb676a84160172 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Wed Dec 10 15:13:32 2008 +0100 + + ppc4xx: Disable EEPROM write access on PMC440 boards + + This patch disables EEPROM wrtie access by default on PMC440 board. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 5b67a1439a73ba6c34007d9ff60a2c6aa90265df +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Wed Dec 10 15:12:56 2008 +0100 + + ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 71fa0714fe5134bc8718c38d5261d267e88582ba +Author: Stefan Roese <sr@denx.de> +Date: Tue Nov 18 16:36:12 2008 +0100 + + MIPS: Flush data cache upon relocation + + This patch now adds a flush to the data cache upon relocation. The + current implementation is missing this. Only a comment states that it + should be done. So let's really do it now. + + Signed-off-by: Stefan Roese <sr@denx.de> + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 44174343688dba32571a34550dba08971c65fef1 +Author: Stefan Roese <sr@denx.de> +Date: Tue Nov 18 16:36:22 2008 +0100 + + MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT + + This patch adds the CONFIG_SKIP_LOWLEVEL_INIT option to start.S. This + enables support for boards where the lowlevel initialization is + already done when U-Boot runs (e.g. via OnChip ROM). + + This will be used in the upcoming VCTH board support. + + Signed-off-by: Stefan Roese <sr@denx.de> + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit db08ecaa6eb8176904b3bae103a85ee8f735dc40 +Author: Stefan Roese <sr@denx.de> +Date: Wed Nov 12 13:18:02 2008 +0100 + + MIPS: Add board_early_init_f() to init_sequence + + This patch adds the board_early_init_f() call to the MIPS init + sequence. A weak dummy implementation is also added which can be + overridden by a board specific version. + + This will be used by the upcoming VCTH board support. + + Signed-off-by: Stefan Roese <sr@denx.de> + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 9d23fc584c4b7b8bb9ecbee48920b1b04b08fa1b +Author: Stefan Roese <sr@denx.de> +Date: Wed Nov 12 13:18:19 2008 +0100 + + MIPS: Add onenand_init() to board.c and move nand_init() + + This patch adds a call to onenand_init() for OneNAND support and moves + the nand_init() call to an earlier place, so that the environment can + be used from NAND and OneNAND. + + Signed-off-by: Stefan Roese <sr@denx.de> + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit d8bbc51c7ba9b737a20984333d19fe28a3526431 +Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> +Date: Tue Dec 9 11:32:46 2008 +0900 + + sh: Update sh2/sh2a timer + + Renesas SH2/SH2A timer broken. + This patch fix timer function. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit a319f1496210117b73198e3d889ffffaf6825d00 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Fri Dec 5 07:27:37 2008 +0100 + + sh: r2dplus fix register access + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 4d4a96055f6917335a89dbdf2e5556fa5ac329f6 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Tue Dec 2 07:40:03 2008 +0100 + + sh: r2dplus/lowlevel_init: coding style fix + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit c54b9a42d8f5ab5b2a039b3a2e6fde8b427745e5 +Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> +Date: Tue Nov 25 11:05:19 2008 +0900 + + sh: Changed value of CACHE_OC_NUM_ENTRIES and CACHE_OC_WAY_SHIFT + + SH4 is different a value of CACHE_OC_NUM_ENTRIES and + CACHE_OC_WAY_SHIFT every CPU. + This patch corrects these values. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit e9d5f35497885b3c65d494d09a525d443dcccd3b +Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> +Date: Thu Nov 20 16:44:42 2008 +0900 + + sh: Update sh timer function + + Change to write/readX function and fix timer problem. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit b81786cff476c41e332eaeb679158f6527cd67d4 +Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> +Date: Tue Nov 4 11:58:58 2008 +0900 + + sh: Migo-R: Update BSC value + + A value of BSC CS4 was wrong, Fixed it. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 5783758fd260a02f44566ad8f29f899565cd0403 +Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> +Date: Mon Nov 17 16:52:09 2008 +0900 + + sh: Update ms7722se board config + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 15e2697c9f7fb2ba672a1a70f07cd6d9d4e92b51 +Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> +Date: Mon Nov 17 16:53:09 2008 +0900 + + sh: Update SuperH serial driver + + The address of SCFSR register is wrong at SH7720/SH7721. + This patch fix this. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 9a1d3557dcd47365c12eeab584b822e57d994352 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Tue Nov 11 22:20:15 2008 +0100 + + sh: fix rsk7203 and MigoR out of tree build + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 1951f847f0a851853871b613ad7cf21a5242226c +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Wed Dec 10 14:41:25 2008 +0100 + + ppc4xx: Update TEXT_BASE for CPCI405 boards + + This patch fixes building U-Boot for CPCI405 boards. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 8c92af7b2fbd60ae87379477f93c7ec9441b7452 +Author: Stefan Roese <sr@denx.de> +Date: Tue Dec 9 20:08:01 2008 +0100 + + ppc4xx: Remove some features from ALPR to fit into 256k again + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 3b089e4f889a2902449d55e081c886ae607cae89 +Author: Stefan Roese <sr@denx.de> +Date: Wed Dec 10 10:32:59 2008 +0100 + + UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization + + With this patch we set the type back to NONE upon failing UBI partition + initialization. Otherwise further calls to the UBI subsystem would try + to really access the non-existing UBI partition. + + Thanks to Michael Lawnick for pointing this out. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 817329351639a8895cd9b87b33aeff043f3d5a44 +Author: Stefan Roese <sr@denx.de> +Date: Wed Dec 10 10:28:33 2008 +0100 + + UBI: Return -ENOMEM upon failing malloc + + Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon + failing malloc(). + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Tue Dec 9 23:34:15 2008 -0800 + + Fix compile error in building MBX860T. + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 8fab49ea911fe925392fa5afcc9bc7373a3d0cee +Author: Michal Simek <monstr@monstr.eu> +Date: Tue Nov 25 11:42:20 2008 +0100 + + microblaze: Remove XUPV2P board + + --- + + Microblaze platforms use generic settings and to have + many platforms is confusing that's why I decided to remove this + platform from U-BOOT. ml401 tree is sufficient for covering + all Microblaze platforms. + + This change will go through microblaze custodian tree. + +commit 99ba6f353582720defff6e6e6761dc455a207d31 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon Nov 24 18:25:41 2008 +0100 + + microblaze: Remove CONFIG_LIBFDT due to error in common files + +commit e7d591e823a991513833af7030468409e25a3b13 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon Nov 24 11:43:00 2008 +0100 + + microblaze: Fix ml401 uart16550 setting + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit c85ff0553a8cfbcca51c15b947e1ed55d3810a39 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon Nov 24 11:38:22 2008 +0100 + + microblaze: Set up relocation is done + +commit bcb6dd9187d4b23c748704767bd12d20c829e996 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Dec 9 23:20:31 2008 -0500 + + tools/netconsole: new script for working with netconsole over UDP + + While the doc/README.NetConsole does have a snippet for people to + create their own netcat script, it's a lot easier to make a simple + dedicated script and tell people to use it. + + Also spruce it up a bit to make it user friendly. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 8c5170a7d088601d5f30d85093388dab1f1e8ec0 +Author: Sonic Zhang <Sonic.Zhang@analog.com> +Date: Tue Dec 9 23:20:18 2008 -0500 + + fs/fat: handle FAT on SATA + + The FAT file system driver should also handle FAT on SATA devices. + + Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com> + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97 +Author: Jerry Van Baren <gvb.uboot@gmail.com> +Date: Mon Nov 24 08:15:02 2008 -0500 + + libfdt: Fix redefined uintptr_t warning for USE_HOSTCC + + Compiling U-Boot in an old OS environment (RedHat-7.3 :-) gives the + following warnings from FDT: + + include/libfdt_env.h:50: warning: redefinition of 'uintptr_t' + /usr/include/stdint.h:129: warning: 'uintptr_t' previously declared here + + Fix: Protect the definition of uintptr_t when compiling on the host + system. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 1fc2b165c51d6f40c8d505f1b3eaefdb6599b17b +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sat Nov 22 08:43:29 2008 +1100 + + Moved sc520 PCI definitions to stand-alone file + + Signed Off By: Graeme Russ <graeme.russ@gmail.com> + +commit 1f5070c0c18fa5684bfce09c8abdf10c04ed48fa +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sat Nov 22 08:43:21 2008 +1100 + + Fixed path to sc520 SSI include file + + Signed Off By: Graeme Russ <graeme.russ@gmail.com> + +commit d4f70da544c33db3e4fce6473dea4ecca4322545 +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Fri Nov 21 06:28:05 2008 +1100 + + Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit c034075a713b60e654c64e88e87da29440f31bb4 +Author: Stefan Roese <sr@denx.de> +Date: Wed Nov 12 13:30:10 2008 +0100 + + serial: Add vcth UART driver + + This patch adds the UART driver for the upcoming VCTH board support. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 142a80ffc3b537a9c45acd2444a42a77f147c602 +Author: Ilya Yanok <yanok@emcraft.com> +Date: Thu Nov 13 19:49:36 2008 +0300 + + jffs2: cache data_crc results + + As we moved data_crc() invocation from jffs2_1pass_build_lists() to + jffs2_1pass_read_inode() data_crc is going to be calculated on each + inode access. This patch adds caching of data_crc() results. There + is no significant improvement in speed (because of flash access + caching added in previous patch I think, crc in RAM is really fast) + but this patch impacts memory usage -- every b_node structure uses + 12 bytes instead of 8. + + Signed-off-by: Alexey Neyman <avn@emcraft.com> + Signed-off-by: Ilya Yanok <yanok@emcraft.com> + +commit 9b7076229ec6a958bd835ab70745f7676297ce82 +Author: Ilya Yanok <yanok@emcraft.com> +Date: Thu Nov 13 19:49:35 2008 +0300 + + jffs2: summary support + + This patch adds support for reading fs information from summary + node instead of scanning full eraseblock. + + Signed-off-by: Ilya Yanok <yanok@emcraft.com> + +commit 70741004dc28946cd82c7af6789c4ddb3fc94526 +Author: Ilya Yanok <yanok@emcraft.com> +Date: Thu Nov 13 19:49:34 2008 +0300 + + jffs2: add buffer to cache flash accesses + + With this patch JFFS2 code allocates memory buffer of max_totlen size + (size of the largest node, calculated during scan time) and uses it to + store entire node. Speeds up loading. If malloc fails we use old ways + to do things. + + Signed-off-by: Alexey Neyman <avn@emcraft.com> + Signed-off-by: Ilya Yanok <yanok@emcraft.com> + +commit 8a36d31f72411144ac0412ee7e1880e801acd754 +Author: Ilya Yanok <yanok@emcraft.com> +Date: Thu Nov 13 19:49:33 2008 +0300 + + jffs2: rewrite jffs2 scanning code based on Linux one + + Rewrites jffs2_1pass_build_lists() function in style of Linux's + jffs2_scan_medium() and jffs2_scan_eraseblock(). + This includes: + - Caching flash acceses + - Smart dealing with free space + + Signed-off-by: Alexey Neyman <avn@emcraft.com> + Signed-off-by: Ilya Yanok <yanok@emcraft.com> + +commit e0b5532579eda8b4629f1b4f6e49c3cc60f52237 +Author: Ilya Yanok <yanok@emcraft.com> +Date: Thu Nov 13 19:49:32 2008 +0300 + + jffs2: add sector_size field to part_info structure + + This patch adds sector_size field to part_info structure (used + by new JFFS2 code). + + Signed-off-by: Ilya Yanok <yanok@emcraft.com> + +commit f73846956778a7dfee83403ef9747aff77198848 +Author: Ilya Yanok <yanok@emcraft.com> +Date: Thu Nov 13 19:49:31 2008 +0300 + + jffs2: fix searching for latest version in jffs2_1pass_list_inodes() + + We need to update i_version inside cycle to find really latest version + inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside + dump_inode() instead of calling expensive jffs2_1pass_read_inode(). + + Signed-off-by: Alexey Neyman <avn@emcraft.com> + Signed-off-by: Ilya Yanok <yanok@emcraft.com> + +commit 1113cb764b3da256ef8a1f9539f4efbe221ff3c4 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Dec 9 23:13:51 2008 +0100 + + evb64260: fix "cast to pointer from integer of different size" warnings + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit d2776827315c3d469b8cb4cec14d58877798daa2 +Author: Stefan Althoefer <stefan.althoefer@web.de> +Date: Sun Dec 7 19:39:11 2008 +0100 + + USB: descriptor handling + + Hi, + + I found a bug when working with the u-boot USB subsystem on IXP425 processor + (big endian Xscale aka ARMv5). + I recognized that the second usb_endpoint_descriptor of the attached memory + stick was corrupted. + + The reason for this are the packed structures below (either u-boot and + u-boot-usb): + + -------------- + /* Endpoint descriptor */ + struct usb_endpoint_descriptor { + unsigned char bLength; + unsigned char bDescriptorType; + unsigned char bEndpointAddress; + unsigned char bmAttributes; + unsigned short wMaxPacketSize; + unsigned char bInterval; + unsigned char bRefresh; + unsigned char bSynchAddress; + + } __attribute__ ((packed)); + /* Interface descriptor */ + struct usb_interface_descriptor { + unsigned char bLength; + unsigned char bDescriptorType; + unsigned char bInterfaceNumber; + unsigned char bAlternateSetting; + unsigned char bNumEndpoints; + unsigned char bInterfaceClass; + unsigned char bInterfaceSubClass; + unsigned char bInterfaceProtocol; + unsigned char iInterface; + + unsigned char no_of_ep; + unsigned char num_altsetting; + unsigned char act_altsetting; + struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS]; + } __attribute__ ((packed)); + ------------ + + As usb_endpoint_descriptor is only 7byte in length, the start of all + odd ep_desc[] structures is not word aligned. This makes wMaxPacketSize + of these structures also not word aligned. + + ARMv5 Architecture however does not support non-aligned multibyte + data type (see A2.8 of ARM Architecture Reference Manual). + + Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de> + Signed-off-by: Remy Böhmer <linux@bohmer.net> + +commit 4c253fdb2a175ea3472c38a1455a16faa58e81f0 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Dec 9 10:27:33 2008 -0600 + + drivers/fsl_pci_init: Fix compile warning + + fsl_pci_init.c: In function 'fsl_pci_setup_inbound_windows': + fsl_pci_init.c:122: warning: comparison is always true due to limited range of data type + + The check only makes sense if we are CONFIG_PHYS_64BIT + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit dedacc18a8c2b3951581eb721fa055a4e0ac4845 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sun Dec 7 09:45:35 2008 +0100 + + usbtty/omap: update to current API + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + Signed-off-by: Remy Böhmer <linux@bohmer.net> + +commit ee2e9ba917a62cc2e3a484bb79c8da0e01cb93ed +Author: Anatolij Gustschin <agust@denx.de> +Date: Tue Dec 9 17:52:05 2008 +0100 + + video: fix FADS823 and RRvision compiling issues + + Since commit 561858ee building for FADS823 and RRvision + doesn't work. Let's include version.h and timestamp.h + unconditionally to fix the problem. + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit 2d2e05727fe4013f807ffa814dff0e75259a1db4 +Author: Stefan Roese <sr@denx.de> +Date: Tue Dec 2 10:53:47 2008 +0100 + + UBI: Fix size parsing in "ubi create" + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 2ee951ba2ac9874d2a93d52e7a187d3184be937e +Author: Stefan Roese <sr@denx.de> +Date: Thu Nov 27 14:07:09 2008 +0100 + + UBI: Enable re-initializing of the "ubi part" command + + With this patch now, the user can call "ubi part" multiple times to + re-connect the UBI device to another MTD partition. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 9def12cae33d2d3ea2dd56b197fd3dfb3ad60bf4 +Author: Stefan Roese <sr@denx.de> +Date: Thu Nov 27 14:05:15 2008 +0100 + + MTD: Fix problem based on non-working relocation (list head mtd_partitions) + + Don't use LIST_HEAD() but initialize the struct via INIT_LIST_HEAD() upon + first call of add_mtd_partitions(). Otherwise this won't work on platforms + where the relocation is broken (like MIPS or PPC). + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 5e3ab68e9acf9edf304b8aa32ad7e005483a2c47 +Author: Trent Piepho <tpiepho@freescale.com> +Date: Wed Nov 12 17:29:48 2008 -0800 + + Section name should be ".data", not "data" + + Signed-off-by: Trent Piepho <tpiepho@freescale.com> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 7fa6a2f3b66579dea8bc1a9177646e1141731b15 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Dec 9 00:39:08 2008 +0100 + + MAKEALL: Automatically use parallel builds + + Add logic to the MAKEALL script to determine the number of CPU cores + on the system, and run a parallel build if there is more than one. + Usually this significantrly accelerates builds. + + Allow to manually adjust the number of parallel make jobs by using + the "BUILD_NCPUS" environment variable. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 268405fa7c44156c5192a70779920c70906af8d6 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Dec 9 00:24:30 2008 +0100 + + vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23 + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 153176a9414120ca1736f3cc4951623d6e14e6af +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Tue Nov 11 06:08:59 2008 +0100 + + avr32/bootm: remove unused variable 'ret' + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + +commit 434c51a5e62f608a2a78ed5398ac43a1c77cc183 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Wed Nov 12 13:06:48 2008 -0600 + + Remove unneeded CONFIG_SHELL references + + Make should be using the bash shell by default which makes + CONFIG_SHELL unnecessary + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit cf7a7b99794bac936899819b95539be1dbd71708 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Wed Nov 12 12:33:20 2008 -0600 + + Use bash for default GNU Make shell application + + Some Make script commands rely on bash-specific features like brace + expansion, so default to bash for the SHELL variable with a fallback + to the standard sh shell + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 4b530018764934ad5689196e9aa5714a6f4d1a6c +Author: Heiko Schocher <hs@denx.de> +Date: Wed Nov 12 09:50:45 2008 +0100 + + jffs2: rename devices_init () in common/jffs2.c + + rename devices_init () in common/jffs2.c to + jffs2_devices_init (), because there is also a + devices_init () in common/devices.c. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit af5eb847a10f1037590001355d88bab3fe7be48b +Author: Daniel Hellstrom <daniel@gaisler.com> +Date: Mon Nov 10 12:46:20 2008 +0000 + + SPARC: Fixed compiler error introduced by commit c160a9544743 + + This patch fixes a build error for the SPARC platform. It was + introduced by commit c160a9544743e80e8889edb2275538e7764ce334. + + Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> + +commit 4c60259899aa00f59db0d936b8807f9a26411c0f +Author: Gary Jennejohn <garyj@denx.de> +Date: Sun Nov 9 12:50:59 2008 +0100 + + mgsuvd add the board-specific part of the HDLC driver + + Signed-off-by: Gary Jennejohn <garyj@denx.de> + +commit 534a4359666af48bd69a3743d8a8c2bdb1d3ec70 +Author: Gary Jennejohn <garyj@denx.de> +Date: Sun Nov 9 12:45:03 2008 +0100 + + mgcoge add the board-specific part of the HDLC driver + + Signed-off-by: Gary Jennejohn <garyj@denx.de> + +commit 135f5534538bb8ea4f38a7030da12187d22ef7e0 +Author: Gary Jennejohn <garyj@denx.de> +Date: Sun Nov 9 12:36:15 2008 +0100 + + keymile add the common parts of the HDLC driver + + This implements the ICN protocol used across the backplane and is + needed by all the keymile boards. + + Signed-off-by: Gary Jennejohn <garyj@denx.de> + +commit 1cb82a9207a550557399eabc7fe47f21bbd9ddf8 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Fri Nov 7 22:46:22 2008 +0100 + + drivers/bios_emulator: Move conditional compilation to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit bcdf1d2cf6b24fb905fd7da80da4b3c65a7995b5 +Author: Richard Retanubun <RichardRetanubun@RuggedCom.com> +Date: Thu Nov 6 14:01:51 2008 -0500 + + common/cmd_ide.c: Corrected endian order printing for compact flash serial number. + + Corrected endian order printing for compact flash serial number. + + Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> + +commit 16a28ef219c27423a1ef502f19070c4d375079b8 +Author: Gary Jennejohn <garyj@denx.de> +Date: Thu Nov 6 15:04:23 2008 +0100 + + IOMUX: Add console multiplexing support. + + Modifications to support console multiplexing. This is controlled using + CONFIG_SYS_CONSOLE_MUX in the board configuration file. + + This allows a user to specify multiple console devices in the environment + with a command like this: setenv stdin serial,nc. As a result, the user can + enter text on both the serial and netconsole interfaces. + + All devices - stdin, stdout and stderr - can be set in this manner. + + 1) common/iomux.c and include/iomux.h contain the environment setting + implementation. + 2) doc/README.iomux contains a somewhat more detailed description. + 3) The implementation in (1) is called from common/cmd_nvedit.c to + handle setenv and from common/console.c to handle initialization of + input/output devices at boot time. + 4) common/console.c also contains the code needed to poll multiple console + devices for input and send output to all devices registered for output. + 5) include/common.h includes iomux.h and common/Makefile generates iomux.o + when CONFIG_SYS_CONSOLE_MUX is set. + + Signed-off-by: Gary Jennejohn <garyj@denx.de> + +commit 774ce72026f74ac9641bcbbc588b20f2e13f7ab8 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Nov 4 16:03:46 2008 -0500 + + strings: use puts() rather than printf() + + When running `strings` on really long strings, the stack tends to get + smashed due to printf(). Switch to puts() instead since we're only passing + the data through. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit b03150b52e3c491a86a3cc0945274f0e8f9872e7 +Author: Niklaus Giger <niklaus.giger@member.fsf.org> +Date: Mon Nov 3 22:16:18 2008 +0100 + + Use new CONFIG_SYS_VXWORKS parameters for Netstal boards + + Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> + +commit 29a4c24de99d8cb4ac32991c04cab87ed94ca1f9 +Author: Niklaus Giger <niklaus.giger@member.fsf.org> +Date: Mon Nov 3 22:15:34 2008 +0100 + + cmd_elf.c: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters + + - fix size too small by one in sprintf + - changed old (pre 2004) device name ibmEmac to emac + - boot device may be overriden in board config + - servername may be defined in board config + - additional parameters may be defined in board config + - fixed some line wrappings + - replaced redundant MAX define by max + + Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> + +commit e9084b23d16102f44ace24379a1c0c352497ef80 +Author: Niklaus Giger <niklaus.giger@member.fsf.org> +Date: Mon Nov 3 22:14:36 2008 +0100 + + Add vxworks.h to handle CONFIG_SYS_VXWORKS parameters + + Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> + +commit 0b2f4ecad473d785959c7976f20d2a00bd0ee01f +Author: Niklaus Giger <niklaus.giger@member.fsf.org> +Date: Mon Nov 3 22:13:47 2008 +0100 + + README: Document CONFIG_SYS parameters for vxworks + + Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> + +commit ace514837cac656e29c37a19569cb8ea83071126 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Fri Oct 31 11:12:38 2008 -0500 + + lcd: Let the board code show board-specific info cleanup + + remove unneeded version.h from lcd.c + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 561858ee7d0274c3e89dc98d4d0698cb6fcf6fd9 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Nov 3 09:30:59 2008 -0600 + + Update U-Boot's build timestamp on every compile + + Use the GNU 'date' command to auto-generate a new U-Boot + timestamp on every compile. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 83ad179e2f0f625b88adb8ef5696709e46fb9077 +Author: Remy Bohmer <linux@bohmer.net> +Date: Thu Dec 4 22:25:57 2008 +0100 + + Remove redundant armv4 flag from arm926ejs compile flags + + Currently the arm926ejs tree has the armv4 option set during compilation. + This flag does not belong here because a arm926 CPU is always a armv5 CPU. + + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit 89a7a87f084c657f8e32b513a77b50eca07e17ec +Author: Nicolas Ferre <nicolas.ferre@atmel.com> +Date: Sat Dec 6 13:11:14 2008 +0100 + + at91: Choose environment variables location within make config target + + This patch adds the possiblity to choose the media where the environment will + be located. This allow to choose this fundamental configuration without editing + config files. + + Documentation file added. + + Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> + Acked-by: Stelian Pop <stelian@popies.net> + Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 1450c4a6682378567030414a9f1198c39b7730c7 +Author: Anatolij Gustschin <agust@denx.de> +Date: Mon Nov 3 15:30:34 2008 +0100 + + lwmon, tqm8xx: Fix build errors + + Commit 6b59e03e0237a40a2305ea385defdfd92000978b + lcd: Let the board code show board-specific info + + introduced some bugs which prevent U-Boot building + for lwmon board if CONFIG_LCD_INFO_BELOW_LOGO will + be defined in the board configuration. + + Also "LCD enabled" building for TQM823L doesn't work + since this commit. + + This patch fixes above-mentioned issues. + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit bfa0af6b22ff25b0719a8910f9b6d1f975aa6fb0 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Nov 2 01:18:18 2008 -0400 + + ignore .gdb_history files + + When using gdb, history files will often get generated. So ignore them. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit c8aa7dfc18f7cc90d0aea6c7becbb67dfc5bba4b +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Fri Oct 31 12:26:55 2008 +0100 + + FPGA: move fpga drivers to drivers/fpga + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 6a86bb6c25376f0358478219fa28d7c84dd01ed0 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Dec 1 16:29:38 2008 -0600 + + net: Fix TftpStart() ip:filename bug + + The TftpStart() function modifies the 'BootFile' + string when 'BootFile' contains both an IP address + and filename (eg 1.2.3.4:/path/file). This causes + subsequent calls to TftpStart to incorrectly parse + the TFTP filename and server IP address to use. + For example: + + => tftp 0x100000 10.52.0.62:/home/ptyser/non_existant + Speed: 100, half duplex + Using eTSEC1 device + TFTP from server 10.52.0.62; our IP address is 10.52.253.79 + ^^^^^^^^^^ CORRECT + Filename '/home/ptyser/non_existant'. + ^^^^^^^^^^^^^^^^^^^^^^^^^ CORRECT + Load address: 0x100000 + Loading: * + TFTP error: 'File not found' (1) + Starting again + + eTSEC2: No link. + Speed: 100, half duplex + Using eTSEC1 device + TFTP from server 10.52.0.33; our IP address is 10.52.253.79 + ^^^^^^^^^^ WRONG + Filename '10.52.0.62'. + ^^^^^^^^^^ WRONG + Load address: 0x100000 + Loading: * + TFTP error: 'File not found' (1) + Starting again + + TftpStart() was modified to not modify the 'BootFile' string. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit d32c5be50bf0600bfdc54223ef341ee9c63db445 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Dec 1 16:26:21 2008 -0600 + + net: Add additional IP fragmentation check + + Ignore IP packets which have the "more fragments" flag bit + set. This flag indicates the IP packet is fragmented and + must be ignored by U-Boot. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit e0c07b868cab405ab4b5335a0247899bfc5ea0b6 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Dec 1 16:26:20 2008 -0600 + + net: Define IP flag field values + + These defines were pulled from the "Add simple + IP/UDP fragmentation support" patch from Frank + Haverkamp <haver@vnet.ibm.com>. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 23afaba65ec5206757e589ef334a8b38168c045f +Author: Anatolij Gustschin <agust@denx.de> +Date: Tue Dec 2 10:31:04 2008 +0100 + + net: tsec: Fix Marvell 88E1121R phy init + + This patch tries to ensure that phy interrupt pin + won't be asserted after booting. We experienced + following issues with current 88E1121R phy init: + + Marvell 88E1121R phy can be hardware-configured + to share MDC/MDIO and interrupt pins for both ports + P0 and P1 (e.g. as configured on socrates board). + Port 0 interrupt pin will be shared by both ports + in such configuration. After booting Linux and + configuring eth0 interface, port 0 phy interrupts + are enabled. After rebooting without proper eth0 + interface shutdown port 0 phy interrupts remain + enabled so any change on port 0 (link status, etc.) + cause assertion of the interrupt. Now booting Linux + and configuring eth1 interface will cause permanent + phy interrupt storm as the registered phy 1 interrupt + handler doesn't acknowledge phy 0 interrupts. This + of course should be fixed in Linux driver too. + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + Acked-by: Andy Fleming <afleming@freescale.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 2e4970d8109d690adcf615d9e3cac7b5b2e8eaed +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Tue Dec 2 12:59:51 2008 -0600 + + net: Fix download command parsing + + When CONFIG_SYS_HUSH_PARSER is defined network download + commands with 1 argument in the format 'tftp "/path/file"' + do not work as expected. The hush command parser strips + the quotes from "/path/file" which causes the network + commands to interpret "/path/file" as an address + instead of the intended filename. + + The previous check for a leading quote in netboot_common() + was replaced with a check which ensures only valid + numbers are treated as addresses. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 3c2c2f427905040c1513d0c51d637689cba48346 +Author: Remy Bohmer <linux@bohmer.net> +Date: Thu Nov 27 22:30:27 2008 +0100 + + Remove non-ascii characters from fat code + + This code contains some non-ascii characters in comment lines and code. + Most editors do not display those characters properly and editing those + files results always in diffs at these places which are usually not required + to be changed at all. This is error prone. + + So, remove those weird characters and replace them by normal C-style + equivalents for which the proper defines were already in the header. + + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit dc889e865356497d3e495570118c2245ebce2631 +Author: Dave Liu <daveliu@freescale.com> +Date: Fri Nov 28 20:16:58 2008 +0800 + + 85xx: fix the wrong DDR settings for MPC8572DS + + The default DDR freq is 400MHz or 800M data rate, + the old settings is pure wrong for the default case. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit 9df59533f77de2829b4b66e5b7620e04edaa391c +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Nov 24 10:29:26 2008 -0600 + + 85xx: init gd as early as possible + + Moved up the initialization of GD so C code like set_tlb() can use + gd->flags to determine if we've relocated or not in the future. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit aed461af81012a398a205e9be67ab37667491838 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Nov 24 10:29:25 2008 -0600 + + 85xx: Fix relocation of CCSRBAR + + If the virtual address for CCSRBAR is the same after relocation but + the physical address is changing we'd end up having two TLB entries with + the same VA. Instead we new us the new CCSRBAR virt address + 4k as a + temp virt address to access the old CCSRBAR to relocate it. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit ea154a1781135d822eedee7567cc156089eae93c +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Nov 24 10:25:14 2008 -0600 + + FSL: Moved BR_PHYS_ADDR for localbus to common header + + The BR_PHYS_ADDR macro is useful on all machines that have local bus + which is pretty much all 83xx/85xx/86xx chips. + + Additionally most 85xx & 86xx will need it if they want to support + 36-bit physical addresses. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit 9427ccde0355a2ebf47454e8e1be59f5b9864e08 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Dec 1 13:47:12 2008 -0600 + + 85xx: Add PORDEVSR_PCI1 define + + Add define used to determine if PCI1 interface is in PCI or PCIX mode. + + Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1 + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 35db1c6d34b57ae15e99cf03c8e8f8a6148d74f3 +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Fri Nov 21 19:24:22 2008 -0600 + + drivers/fsl_pci_init: Fix inbound window mapping bug + + The current code will cause the creation of a 4GB window + starting at 0 if we have more than 4GB of RAM installed, + which overlaps with PCI_MEM space and causes pci_bus_to_phys() + to return erroneous information. Limit the size to 4GB - 1; + which causes the code to create one 2GB and one 1GB window + instead. + + Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit 5a105a333dab6a23e92d763ce76d6f31d57f45df +Author: Jon Loeliger <jdl@freescale.com> +Date: Thu Nov 20 15:36:48 2008 -0600 + + Removed unused CONFIG_L1_INIT_RAM symbol. + + Prevent further viral propogation of the unused + symbol CONFIG_L1_INIT_RAM by just removing it. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit 7008d26a40a76f90cae5824c812cfed449fb97b8 +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Wed Oct 29 09:21:44 2008 -0500 + + fsl ddr skip interleaving if not supported. + + Removed while(1) hang if memctl_intlv_ctl is set wrong. + Remove embedded tabs from strings. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Acked-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit dd332e18d082de75eca3fc2c7c778f5d4571a096 +Author: Anatolij Gustschin <agust@denx.de> +Date: Thu Nov 13 18:08:57 2008 +0100 + + 85xx: socrates: fix DDR SDRAM tlb entry configuration + + since commit be0bd8234b9777ecd63c4c686f72af070d886517 + tlb entry for socrates DDR SDRAM will be reconfigured + by setup_ddr_tlbs() from initdram() causing an + inconsistency with previously configured DDR SDRAM tlb + entry from tlb_table: + + socrates>l2cam 7 9 + IDX PID EPN SIZE V TS RPN U0-U3 WIMGE UUUSSS + 7 : 00 00000000 256MB V 0 -> 0_00000000 0000 -I-G- ---RWX + 8 : 00 00000000 256MB V 0 -> 0_00000000 0000 ----- ---RWX + 9 : 00 10000000 256MB V 0 -> 0_10000000 0000 ----- ---RWX + + This patch makes the presence of the DDR SDRAM tlb entry in + the tlb_table dependent on CONFIG_SPD_EEPROM to avoid this + inconsistency. + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit a2cd50ed6ef0ac6b127b3d6db756979a8336718d +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Tue Nov 11 10:17:10 2008 -0600 + + 85xx: Add CPU 2 errata workaround to all 8548 boards + + All mpc8548-based boards should implement the suggested workaround + to CPU 2 errata. Without the workaround, its possible for the + 8548's core to hang while executing a msync or mbar 0 instruction + and a snoopable transaction from an I/O master tagged to make + quick forward progress is present. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit e57f0fa1333cdf3ca36110aac2900712a5f82976 +Author: Dave Liu <daveliu@freescale.com> +Date: Tue Oct 28 17:53:45 2008 +0800 + + 85xx: the DDR tlb is missed for the !CONFIG_SPD_EEPROM case + + we need TLB entry for DDR at !SPD case. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit 9b0ad1b1c7a15ff674978705c7c52264978dc5d8 +Author: Dave Liu <daveliu@freescale.com> +Date: Tue Oct 28 17:53:38 2008 +0800 + + 85xx: remove the unused ddr_enable_ecc in the board file + + The DDR controller of 8548/8544/8568/8572/8536 processors + have the ECC data init feature, and the new DDR code is + using the feature, and we don't need the way with DMA to + init memory any more. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit 4a129a57d923f7c15aa1f567028a80a32d66a100 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sun Nov 30 19:36:53 2008 +0100 + + at91rm9200dk: Fix typo + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit ed3b18e05c9a8ffa5fb643da9bcec7452e5d5e01 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sun Nov 30 19:36:50 2008 +0100 + + AT91: remove non supported board AT91RM9200DF macro + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit bd876772ee04095e5dd943d97515a1f14bad4b1c +Author: Ilko Iliev <iliev@ronetix.at> +Date: Tue Dec 2 17:27:54 2008 +0100 + + mtd/dataflash.c: fix a problem with the last partition + + This patch fix the problem that only the [NB_DATAFLASH_AREA - 1] dataflash + partition can be defined to use the area to the end of dataflash size. + Now it is possible to have only one dataflash partition from 0 to the end + of of dataflash size. + + Signed-off-by: Ilko Iliev <iliev@ronetix.at> + +commit 03f797793b124dccaae145b977d15d6cb9e74504 +Author: Ilko Iliev <iliev@ronetix.at> +Date: Tue Dec 2 17:20:17 2008 +0100 + + fix some coding style violations. + + This patch fix some coding style violations. + + Signed-off-by: Ilko Iliev <iliev@ronetix.at> + +commit 5e46b1e54112f4b7fd5185665e571510132c12a7 +Author: Stefan Roese <sr@denx.de> +Date: Thu Nov 27 14:11:37 2008 +0100 + + OneNAND: Add missing mtd info struct before calling onenand_erase() + + Without this patch "saveenv" crashes when MTD partitions are enabled (e.g. + for use in UBI) via CONFIG_MTD_PARTITIONS. + + Signed-off-by: Stefan Roese <sr@denx.de> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 29382d4064fbaff5daacff4c3209370fa5713966 +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Thu Nov 20 16:43:52 2008 -0600 + + mpc8641: Fix error in README + + I made some updates to the code that didn't make it into the + README - fix this + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit 801a194616d95e6fc426a176d9615ccbf9876c7f +Author: Jon Loeliger <jdl@freescale.com> +Date: Thu Nov 20 12:01:02 2008 -0600 + + Removed unused CONFIG_L1_INIT_RAM symbol. + + Prevent further viral propogation of the unused + symbol CONFIG_L1_INIT_RAM by just removing it. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit f698738e46cb461e28c2d58228bb34a2fcf5a475 +Author: Jon Loeliger <jdl@freescale.com> +Date: Thu Nov 20 14:02:56 2008 -0600 + + 86xx: Fix non-64-bit compilation problems. + + Introducing 64-bit (36-bit) support for the MPC8641HPCN + failed to accomodate the other two 86xx boards. + Introduce definitions for CONFIG_SYS_CCSRBAR_PHYS_{LOW,HIGH} + CONFIG_SYS_CCSR_DEFAULT_DBAT{U,L} and CONFIG_SYS_CCSR_DEFAULT_IBAT{U,L} + with nominal 32-bit values. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + Acked-by: Becky Bruce <becky.bruce@freescale.com> + +commit bebfc6ef3ec994c8e18783269b1d8d41f8e38afd +Author: Michael Trimarchi <trimarchi@gandalf.sssup.it> +Date: Wed Nov 26 17:40:37 2008 +0100 + + Remove obsolete command (apply afte USB style patch, 80 chars strict) + + Remove USB obsolete commmand + + Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it> + Signed-off-by: Remy Böhmer <linux@bohmer.net> + +commit de39f8c19d7c12017248c49d432dcb81db68f724 +Author: Michael Trimarchi <trimarchi@gandalf.sssup.it> +Date: Wed Nov 26 17:41:34 2008 +0100 + + USB style patch, 80 chars strict + + USB Code style patch + + Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it> + Signed-off-by: Remy Böhmer <linux@bohmer.net> + +commit d10c5a87cb8affbb4d35a311370316d4383d598e +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Fri Nov 7 22:46:21 2008 +0100 + + drivers/usb: Move conditional compilation to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + Signed-off-by: Remy Böhmer <linux@bohmer.net> + +commit 2077e348c2a84901022ad95311b47b70361e6daa +Author: Scott Wood <scottwood@freescale.com> +Date: Tue Nov 25 10:47:02 2008 -0600 + + NAND: Fix misplaced return statement in nand_{read,write}_skip_bad(). + + This caused the operation to be needlessly repeated if there were + no bad blocks and no errors. + + Signed-off-by: Valeriy Glushkov <gvv@lstec.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 89295028e7d8f7a524f485328279d72fdb102385 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon Nov 24 12:09:50 2008 +0100 + + ppc4xx: ml300 remove Xilinx BSP from ml300 folder + + This BSP should be outside u-boot source tree. + The second reason is that xilinx ppc405 was moved to generic platform. + + Signed-off-by: Michal Simek <monstr@monstr.eu> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 24eea623d4974a169026a975ba12fb23d48154b1 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Mon Nov 24 15:11:10 2008 +0100 + + ppc4xx: Remove unused features + + This patch disables some unused features from the PCI405 configuration + to keep U-Boot image size below 192k. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 0c2385c3bb51f5d3911fce1ec4720db86b534c2b +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Mon Nov 24 15:11:09 2008 +0100 + + ppc4xx: Use correct io accessors for PCI405 + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 348c849d86a6f0785752b9bc497a34658713d1d1 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Mon Nov 24 15:11:08 2008 +0100 + + ppc4xx: Remove unused code from PCI405 code + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 58c696eed839af894e0265064669c402dc28b371 +Author: Wolfgang Denk <wd@xpert.denx.de> +Date: Mon Nov 24 21:50:59 2008 +0100 + + AT91RM9200DK: fix broken boot from NOR flash + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 8052352f20b33bef8f9872fc983eac73d4693c38 +Author: Jens Scharsig <esw@bus-elektronik.de> +Date: Tue Nov 18 10:48:46 2008 +0100 + + at91rm9200: fix broken boot from nor flash + + This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if + CONFIG_AT91RM9200 is defined and nor preloader is used. + + Signed-off-by: Jens Scharsig <esw@bus-elektronik.de> + +commit 25ea652e907516a283b38237e83712a918f125d7 +Author: Piotr Ziecik <kosmo@semihalf.com> +Date: Mon Nov 17 15:58:00 2008 +0100 + + UBI: Add proof-of-concept CFI flash support + + With this patch UBI can be used on CFI flash chips. + + Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e6a7edbc1778d27431ac663b40a71dafa5d20578 +Author: Piotr Ziecik <kosmo@semihalf.com> +Date: Mon Nov 17 15:57:59 2008 +0100 + + mtd: Remove a printf() from add_mtd_device(). + + Remove a printf() from add_mtd_device(), which produces spurious output. + + Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 91809ed51d8327a8dbbf29aa98a091154c282171 +Author: Piotr Ziecik <kosmo@semihalf.com> +Date: Mon Nov 17 15:57:58 2008 +0100 + + cfi-mtd: Add cfi-mtd driver. + + Add cfi-mtd driver, which exports CFI flash to MTD layer. + This allows CFI flash devices to be used from MTD layer. + + Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD + option. Initialization is done by calling cfi_mtd_init() from + flash_init(). + + Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6ea808efdf9aa5d9067fbfac32acde8539129ed2 +Author: Piotr Ziecik <kosmo@semihalf.com> +Date: Mon Nov 17 15:49:32 2008 +0100 + + cfi_flash: Add interface for flash verbosity control + + Add interface for flash verbosity control. It allows + to disable output from low-level flash API. It is useful + when calling these low-level functions from context other + than flash commands (for example the MTD/CFI interface + implmentation). + + Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit ebc9784ce6528385bb8d2558e783622d4bbf20f8 +Author: Piotr Ziecik <kosmo@semihalf.com> +Date: Thu Nov 20 15:17:38 2008 +0100 + + cfi_flash: Export flash_sector_size() function. + + Export flash_sector_size() function from drivers/mtd/cfi_flash.c, + so that it can be used in the upcoming cfi-mtd driver. + + Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 45aa5a7f4d5bcb79927ddfc896c1d7c4326e235d +Author: Stefan Roese <sr@denx.de> +Date: Mon Nov 17 14:45:22 2008 +0100 + + cfi_flash: Make all flash access functions weak + + This patch defines all flash access functions as weak so that + they can be overridden by board specific versions. + + This will be used by the upcoming VCTH board support where the NOR + FLASH unfortunately can't be accessed memory-mapped. Special + accessor functions are needed here. + + To enable this weak functions you need to define + CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header. + Otherwise the "old" default functions will be used resulting + in smaller code. + + Signed-off-by: Stefan Roese <sr@denx.de> + Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + +commit a5c4067017631d903e1afa6ad615f0ce19fea517 +Author: Stefan Roese <sr@denx.de> +Date: Mon Nov 24 08:31:16 2008 +0100 + + UBI: Change parsing of size in commands to default to hex + + Currently the size parameters of the UBI commands (e.g. "ubi write") are + decoded as decimal instead of hex as default. This patch now interprets + all these values consistantly as hex, as all other standard U-Boot commands + do. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit de01c76c3ccc4e6c5989228eed58e955a3a1a968 +Author: Stefan Roese <sr@denx.de> +Date: Fri Nov 21 13:06:06 2008 +0100 + + ppc4xx: ML2 shouldn't include the 4xx EMAC driver + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 1a6a00dcc5bdfc6e9b4b00f39c1f583a7f96fc7f +Author: Yuri Tikhonov <yur@emcraft.com> +Date: Fri Nov 14 16:19:19 2008 +0300 + + ppc4xx: katmai: Change default config + + This patch enables support for EXT2, and increases the + CONFIG_SYS_BOOTMAPSZ size for the default configuration + of the katmai boards to use them as the RAID-reference + AMCC setups. + + EXT2 enabling allows one to boot kernels from the EXT2 + formatted Compact Flash cards. + + CONFIG_SYS_BOOTMAPSZ increasing allows one to boot the + Linux kernels, which use PAGE_SIZE of 256KB. Otherwise, + the memory area with DTB file (which is placed at the + end of the bootmap area) will turn out to be overlapped + with the BSS segment of the 256KB kernel, and zeroed + in early_init() of Linux. + + Actually, increasing of the bootmap size could be done + via setting of the bootm_size U-Boot variable, but it looks + like the current U-Boot implementation have some bootm_size- + related functionality lost. In many places through the U-Boot + code the CONFIG_SYS_BOOTMAPSZ definition is used directly + (instead of trying to read the corresponding value from the + environment). The same is truth for the boot_jump_linux() + function in lib_ppc/bootm.c, where U-Boot transfers control + to Linux passing the CONFIG_SYS_BOOTMAPSZ (not bootm_size) + value to the booting kernel. + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + Signed-off-by: Ilya Yanok <yanok@emcraft.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit ddf45cc758d394591fb9bcdcbe96530f733f2bce +Author: Dave Mitchell <dmitch71@gmail.com> +Date: Thu Nov 20 14:09:50 2008 -0600 + + ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization + + Expanded OCM TLB to allow access to 64K OCM as well as 256K of + internal SRAM. + + Adjusted internal SRAM initialization to match updated user + manual recommendation. + + OCM & ISRAM are now mapped as follows: + physical virtual size + ISRAM 0x4_0000_0000 0xE300_0000 256k + OCM 0x4_0004_0000 0xE304_0000 64k + + A single TLB was used for this mapping. + + Signed-off-by: Dave Mitchell <dmitch71@gmail.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit b14ca4b61a681f75f3125676e09d7ce6af66e927 +Author: Dave Mitchell <dmitch71@gmail.com> +Date: Thu Nov 20 14:00:49 2008 -0600 + + ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs + + Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and + L2 cache DCRs from ppc440.h to this new header. + + Also converted these DCR defines from lowercase to uppercase and + modified referencing modules to use them. + + Signed-off-by: Dave Mitchell <dmitch71@gmail.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 711e2b2af820d21d9931d4cf8057d3894600fd54 +Author: Steven A. Falco <sfalco@harris.com> +Date: Thu Nov 20 14:37:57 2008 -0500 + + ppc4xx: Delete unused definitions for SDR0_DDRCFG from ppc4xx.h + + The definitions of bits in SDR_CFG are incorrect, and not used within + U-Boot. Therefore, they can be removed. + + The naming of the sdr_ddrdl/sdr_cfg registers do not follow conventions, + and are unused, so they can be removed too. + + A definition for SDR0_DDRCFG is added. + + Signed-off-by: Steven A. Falco <sfalco@harris.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e23c7c95a96eb0f068efe5c532215a10a1512a95 +Author: Dirk Behme <dirk.behme@gmail.com> +Date: Mon Nov 10 20:15:25 2008 +0100 + + ARM: OMAP: Convert IO macros + + Convert IO macros to readx/writex. + + Signed-off-by: Dirk Behme <dirk.behme@gmail.com> + +commit 263b749e2e25473a48776d317bd2a7e2ddcdd212 +Author: Ilko Iliev <iliev@ronetix.at> +Date: Sun Nov 9 15:53:14 2008 +0100 + + lib_arm: do_bootm_linux() - correct a small mistake + + This patch corrects a small bug in the "if" condition: + the parameter "flag" is 0 and the "if" condition is always true. + The result is - the boom command doesn't start the kernel. + Affected targets: all arm based. + + Signed-off-by: Ilko Iliev <iliev@ronetix.at> + +commit 3e0cda071a67cb5709e3fa4faf6b31a731859acc +Author: Stelian Pop <stelian@popies.net> +Date: Sun Nov 9 00:14:46 2008 +0100 + + AT91: Enable PLLB for USB + + At least some (old ?) versions of the AT91Bootstrap do not set up the + PLLB correctly to 48 MHz in order to make USB host function correctly. + + This patch sets up the PLLB to the same values Linux uses, and makes USB + work ok on the following CPUs: + - AT91CAP9 + - AT91SAM9260 + - AT91SAM9263 + + This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all + the relevant AT91CAP9/AT91SAM9 atmel boards. + + Signed-off-by: Stelian Pop <stelian@popies.net> + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit ad229a44e162af0f65e57e4e3dc133d5f0364ecb +Author: Stelian Pop <stelian@popies.net> +Date: Fri Nov 7 13:55:14 2008 +0100 + + AT91: Use AT91_CPU_CLOCK in displays + + Introduce AT91_CPU_CLOCK and use it for displaying the CPU + speed in the LCD driver. + + Also make AT91_MAIN_CLOCK and AT91_MASTER_CLOCK reflect the + corresponding board clocks. + + Signed-off-by: Stelian Pop <stelian@popies.net> + +commit 25fb4eaaeab3f8866020818f4729d990dcc91cf0 +Author: Stefan Roese <sr@denx.de> +Date: Thu Nov 20 11:46:20 2008 +0100 + + ppc4xx: Clear all potentially pending exceptions in MCSR + + This is needed on Canyonlands which still has an exception pending + while running relocate_code(). This leads to a failure after trap_init() + is moved to the top of board_init_r(). + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit facdad5f2602e899a01746916beddbf9e856b5ee +Author: Heiko Schocher <hs@denx.de> +Date: Wed Nov 19 10:10:30 2008 +0100 + + powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 2f2a5c3714d17f4ead18b713128b7226e0e822f4 +Author: Howard Gregory <Greg.Howard@freescale.com> +Date: Tue Nov 4 14:55:33 2008 +0800 + + mpc83xx: Improve the performance of DDR memory + + modify the CAS timings. my understanding is that these + settings decrease various wait times in the DDR interface. + Because these wait times are in clock cycles, and the DDR + clock on the 8315 RDB runs slower than on some other 83xx + platforms, we can dial down these values without a problem, + thereby decreasing the latency of memory a little. + + Signed-off-by: Howard Gregory <Greg.Howard@freescale.com> + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 8000b086b33a5a81f3f390f37e178db7956dc08b +Author: Kyungmin Park <kyungmin.park@samsung.com> +Date: Fri Oct 24 14:55:33 2008 +0200 + + ARM: Add Apollon UBI support + + To enable UBI on Apollon you need to uncomment the CONFIG_SYS_USE_UBI + macro. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 694a0b3f1c0accd0de94b89555155d69f8022824 +Author: Kyungmin Park <kyungmin.park@samsung.com> +Date: Wed Nov 19 11:47:05 2008 +0100 + + UBI: Add UBI command support + + This patch adds these UBI commands: + + ubi part [nand|onenand] [part] - Show or set current partition + ubi info [l[ayout]] -Display volume and UBI layout information + ubi create[vol] volume [size] [type] - Create volume name with size + ubi write[vol] address volume size - Write volume from address with size + ubi read[vol] address volume [size] - Read volume to address with size + ubi remove[vol] volume - Remove volume + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 58be3a1056d88c6d05f3e914389282807e69923a +Author: Kyungmin Park <kyungmin.park@samsung.com> +Date: Wed Nov 19 16:38:24 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 8/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 47ae6693f54f80455ae32c2e0d995e0e4bdc15b9 +Author: Kyungmin Park <kyungmin.park@samsung.com> +Date: Wed Nov 19 16:36:36 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 7/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 7e6ee7ad27de5216db1baef76f38c3429c8f4a2a +Author: Kyungmin Park <kyungmin.park@samsung.com> +Date: Wed Nov 19 16:32:36 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 6/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit c91a719daa331b5856109313371e4ece5ec06d96 +Author: Kyungmin Park <kyungmin.park@samsung.com> +Date: Wed Nov 19 16:28:06 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 5/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit f412fefa079c6aa9a9763f6869bf787ea6bf6e1b +Author: Kyungmin Park <kyungmin.park@samsung.com> +Date: Wed Nov 19 16:27:23 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 4/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 2d262c4853cb5b6ddce1a28a9641f2de3688d7ea +Author: Kyungmin Park <kyungmin.park@samsung.com> +Date: Wed Nov 19 16:26:54 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 3/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 961df83361aff9a14f226214224eb8a06e05ba24 +Author: Kyungmin Park <kyungmin.park@samsung.com> +Date: Wed Nov 19 16:25:44 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 2/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit f399d4a281713d5ef2d764f05d545fe61e3bd569 +Author: Kyungmin Park <kyungmin.park@samsung.com> +Date: Wed Nov 19 16:23:06 2008 +0100 + + UBI: Add basic UBI support to U-Boot (Part 1/8) + + This patch adds basic UBI (Unsorted Block Image) support to U-Boot. + It's based on the Linux UBI version and basically has a "OS" + translation wrapper that defines most Linux specific calls + (spin_lock() etc.) into no-ops. Some source code parts have been + uncommented by "#ifdef UBI_LINUX". This makes it easier to compare + this version with the Linux version and simplifies future UBI + ports/bug-fixes from the Linux version. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e29c22f5abe6e0f4baa6251efed6074cdfc3db79 +Author: Kyungmin Park <kyungmin.park@samsung.com> +Date: Wed Nov 19 16:20:36 2008 +0100 + + MTD: Add MTD paritioning infrastructure + + This MTD part infrastructure will be used by the upcoming + UBI support. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 9b827cf1720acda2473afa516956eab6f7cca9a1 +Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com> +Date: Thu Oct 16 22:54:03 2008 +0530 + + Align end of bss by 4 bytes + + Most of the bss initialization loop increments 4 bytes + at a time. And the loop end is checked for an 'equal' + condition. Make the bss end address aligned by 4, so + that the loop will end as expected. + + Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 3f510db522d160179dff3ddcce9b18f6241c2c24 +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Mon Nov 10 19:45:35 2008 -0600 + + mpc8641: fix address-cells default in old .dts detection + + address-cells defaults to 2, not 1; so in the unlikely + event that it isn't specified, this patch is required + for correct operation. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit d025aa4b20a0618a2bada0132a9a0a4afb717f1a +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Fri Oct 31 17:14:39 2008 -0500 + + lib_ppc: Move trap_init to occur earlier + + Doing trap_init immediately once we're running from RAM + means we're no longer dependent on the physical location of + the flash on non-BookE platforms. Before trap_init, those + platforms switch to real mode and go to 0xfff00100 on exception. + After the switch, they go to 0x00000100 This makes it easier to + move the flash location. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit d52082b12c6e545705a19433a2f4142526536189 +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Fri Nov 7 13:46:19 2008 -0600 + + mpc8641: Try to detect old .dts files + + Since we've changed the memory map of the board, be nice and + add some checking to try to catch out-of-date .dts files. We do + this by checking the CCSRBAR location in the .dts and comparing + it to the CCSRBAR location in u-boot. If they don't match, a + warning msg is printed. This isn't foolproof, but it's simple and + will catch most of the cases where an out-of-date .dts is present, + including all of the cases where a new u-boot is used with an old + standard MPC8641 .dts file as supplied with Linux. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit 8db0400a27839f91c047dcb83f4a0f09e054a180 +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Thu Nov 6 13:04:09 2008 -0600 + + toplevel Makefile: Add MPC8641HPCN_36BIT target + + This will enable CONFIG_PHYS_36BIT for MPC8641HPCN. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit 3111d32c494e8251b90917447796a7206b757e1e +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Thu Nov 6 17:37:35 2008 -0600 + + mpc8641: Support 36-bit physical addressing + + This patch creates a memory map with all the devices + in 36-bit physical space, in addition to the 32-bit map. + The CCSR relocation is moved (again, sorry) to + allow for the physical address to be 36 bits - this + requires translation to be enabled. With 36-bit physical + addressing enabled, we are no longer running with VA=PA + translations. This means we have to distinguish between + the two in the config file. The existing region name is + used to indicate the virtual address, and a _PHYS variety + is created to represent the physical address. + + Large physical addressing is not enabled by default. + Set CONFIG_PHYS_64BIT in the config file to turn this on. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit c759a01a0022de9378a3a761f49786f87684c916 +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Thu Nov 6 17:36:04 2008 -0600 + + mpc8641: Change 32-bit memory map + + The memory map on the 8641hpcn is modified to look more like + the 85xx boards; this is a step towards a more standardized + layout going forward. As part of this change, we now relocate + the flash. + + The regions for some of the mappings were far larger than they + needed to be. I have reduced the mappings to match the + actual sizes supported by the hardware. + + In addition I have removed the comments at the head + of the BAT blocks in the config file, rather than updating + them. These get horribly out of date, and it's a simple + matter to look at the defines to see what they are set to + since everything is right here in the same file. + + Documentation has been changed to reflect the new map, as this + change is user visible, and affects the OS which runs post-uboot. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit bf9a8c34309ed9276258295db9e9212aabb2531a +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Wed Nov 5 14:55:35 2008 -0600 + + mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY + + We define CONFIG_MONITOR_BASE_EARLY to define the initial location + of the bootpage in flash. Use this to create an early mapping + definition for the FLASH, and change the early_bats code to use this. + + This change facilitates the relocation of the flash since the early + mappings are no longer tied to the final location of the flash. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit c1e1cf69547b138173f87a7f81c42a5d8dbfde3d +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Wed Nov 5 14:55:34 2008 -0600 + + mpc86xx: Use SRR0/1/rfi to enable address translation, not blr + + Using a mtmsr/blr means that you have to be executing at the + same virtual address once you enable translation. This is + unnecessarily restrictive, and is not really how this is + usually done. Change it to use the more common mtspr SRR0/SRR1 + and rfi method. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit 6bf98b1362f0cb237620355ed3e6762fff82388d +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Wed Nov 5 14:55:33 2008 -0600 + + mpc8641: make DIAG_ADDR == FLASH_BASE + + Currently, that's what it is, but it's hardcoded. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit 170deacb1ddc39164bdb68f3963e0c0456a5369b +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Wed Nov 5 14:55:32 2008 -0600 + + mpc8641: Drop imaginary second flash bank, map 8MB + + There's a lot of setup and foo for the second flash + bank. The problem is, this board doesn't actually have one. + Clean this up. Also, the flash is 8M in size. Get rid + of the confusing aliased overmapping, and just map 8M. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit 0f2d66027bfc60dc7eea2f096af8891988c5abe4 +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Wed Nov 5 14:55:31 2008 -0600 + + mpc8641: only define CONFIG_ENV_SIZE once + + It's currently defined twice inside in an if/else block, but + both halves set the same value. Move the define outside + the if. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit 24bfb48c35fed6ad1f047e3e4a27df302482cd93 +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Wed Nov 5 14:55:30 2008 -0600 + + mpc86xx: Move setup_bats into cpu_init_f + + In order to later allow for a physical relocation of the + flash, setup_bats, which sets up the final BAT mapping + for the board, needs to happen *after* init_laws(). + Otherwise, there will be no window programmed for the flash + at the new physical location at the point when we change + the mmu translation. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit 05df3e5a638be8c5b0899eae1766bbe8e4b92c17 +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Wed Nov 5 14:55:29 2008 -0600 + + mpc8641: Remove extra "0" from BR2 define + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit edf3fe7d39a1ee07353128af5221422ce9ccfad6 +Author: Richard Retanubun <RichardRetanubun@RuggedCom.com> +Date: Thu Oct 23 09:08:18 2008 -0400 + + drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver. + + Copied over the fixed PHY driver as used in pp4xx/4xx_enet.c. + This adds support for PHY-less MAC connections to the UEC. + + Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 54bdcc9fb6670afde9c26dcf364f582879bf21d6 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Thu Oct 23 16:27:24 2008 +0000 + + ColdFire: Add mii driver in drivers/net + + All CF platforms' mii.c are consolidated into one + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 25a859066b3af1070eb69f12022113c0a91bd813 +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Mon Oct 27 23:53:17 2008 -0700 + + Moved initialization of PPC4xx EMAC to cpu_eth_init() + + Removed initialization of the driver from net/eth.c + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit 4d03a4e20e58552cb96d61a0e8b56cdb6cc60126 +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Sun Nov 9 21:29:23 2008 -0800 + + Moved PPC4xx EMAC driver to drivers/net + + Also changed path in all linker scripts that reference this driver + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit 96e21f86e8266ed40759e5495ee461265d7f6d28 +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Mon Oct 27 23:50:15 2008 -0700 + + Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC + + All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit 9eb79bd8856bcab896ed5e1f1bca159807a124dd +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Thu Oct 23 22:02:49 2008 -0700 + + Moved initialization of MPC8XX SCC to cpu_eth_init() + + Removed initialization of the driver from net/eth.c + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit a9bec96d6359ac9f90a852962bf3040cad9e0256 +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Wed Oct 22 23:47:51 2008 -0700 + + Moved initialization of MPC8220 FEC to cpu_eth_init() + + Removed initialization of the driver from net/eth.c + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 0e8454e990385a58f708c2fc26d31ac041c7a6c5 +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Wed Oct 22 23:32:48 2008 -0700 + + Moved initialization of QE Ethernet controller to cpu_eth_init() + + Removed initialization of the driver from net/eth.c + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 3456a148276d5494b53ee40242efb6462d163504 +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Wed Oct 22 23:20:29 2008 -0700 + + Moved initialization of FCC Ethernet controller to cpu_eth_init + + Affected boards: + Several MPC8xx boards + Several MPC8260/MPC8272 boards + Several MPC85xx boards + + Removed initialization of the driver from net/eth.c + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 62e15b497f5c6334c059512678c8db7940ae4c61 +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Thu Oct 30 22:15:35 2008 -0700 + + Fix typo in cpu/mpc85xx/cpu.c + + CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 5dfb3ee3f54e2382a08d72906f0e79ecf944f6e3 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Sun Oct 19 12:08:50 2008 +0900 + + net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init + + This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init + as a part of ongoing eth_initialize cleanup work. The function ret value + is also fixed as it should be negative on fail. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit cc94074ecac1885d18ddb683eb934b3c0268aa5b +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Fri Sep 5 01:55:22 2008 -0400 + + Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init() + + Also, removed the driver initialization from net/eth.c + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit f2a7806fc23e82d30c8548911369e0c530607354 +Author: Clive Stubbings <uboot@xentech.co.uk> +Date: Mon Oct 27 15:05:00 2008 +0000 + + xilinx_emaclite buffer overrun + + Patch to fix buffer allocation size and alignment. Buffer needs to be u32 aligned and + PKTSIZE_ALIGN bytes long. + + Acked-by: Michal Simek <monstr@monstr.eu> + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 0115b1953718a2969f6469d3d5da51ba11e12d42 +Author: richardretanubun <richardretanubun@ruggedcom.com> +Date: Fri Sep 26 08:59:12 2008 -0400 + + NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg. + + The current uec_miiphy_read and uec_miiphy_write hardcode access devlist[0] + This patch makes these function use the devname argument that is passed in to + allow access to the phy registers of other devices in devlist[]. + + Signed-of-by: Richard Retanubun <RichardRetanubun@RugggedCom.com> + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 44dcb7332033db8de2810f2fffcae3084f15c8d4 +Author: richardretanubun <richardretanubun@ruggedcom.com> +Date: Mon Oct 6 15:31:43 2008 -0400 + + Adds two more ethernet interface to 83xx + + Fixed compiler warning "declared but unused" eth5_uec_info and eth6_uec_info. + Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit d8003fa03733901b73d6c4667b4d80fc8eb1ddd3 +Author: Stelian Pop <stelian@popies.net> +Date: Fri Nov 7 13:54:31 2008 +0100 + + AT91: Replace AT91_BASE_EMAC by the board specific values. + + AT91_BASE_EMAC is never used outside the board specific files, + so replace its usage by the board specific AT91xxx_BASE_EMAC. + + Signed-off-by: Stelian Pop <stelian@popies.net> + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit c91e17affa175ce06afa89b04752301eb4a61666 +Author: Stelian Pop <stelian@popies.net> +Date: Fri Nov 7 12:09:21 2008 +0100 + + AT91: Replace (undefined) AT91_ID_US* by the board specific values. + + AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined. + Since they are never used outside the board specific files, they can + be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 / + AT91xxx_ID_US2. + + Bug spotted by Jesus Alvarez <jalvarez@micromint.com>. + + Signed-off-by: Stelian Pop <stelian@popies.net> + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 28962f5a2de81bc0eed1c0b08c6bfaa1cc134ea2 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sat Nov 1 10:47:59 2008 +0100 + + Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 1079432e04ccf71aa3684181186182cd63512f19 +Author: Sergey Lapin <slapin@ossfans.org> +Date: Fri Oct 31 12:28:43 2008 +0100 + + Custom AFEB9260 board support + + This patch provides support for AFEB9260 board, a product of + OpenSource hardware and software. Some commertial projects + are made with this design. A board is basically AT91SAM9260-EK + with some modifications and different peripherals and different + parts used. Main purpose of this project is to gain experience in + hardware design. + More info: http://groups.google.com/group/arm9fpga-evolution-board + (In Russian only, sorry). + Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb + + Signed-off-by: Sergey Lapin <slapin@ossfans.org> + +commit 26eecd24f97130e56e9c2c2af0e714e05bce6e00 +Author: Tomohiro Masubuchi <tomohiro_masubuchiattripeaks.co.jp> +Date: Tue Oct 21 13:17:16 2008 +0900 + + Change to use "do_div" macro + + Signed-off-by: Tomohiro Masubuchi <tomohiro_masubuchi@tripeaks.co.jp> + +commit e352495318d8056a00faa21b633b3e4374bfbf52 +Author: Roman Mashak <romez777@gmail.com> +Date: Wed Oct 22 16:00:26 2008 -0400 + + ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory + + OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory. + It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap + + Signed-off-by: Roman Mashak <romez777@gmail.com> + +commit 248b2c367210c06dbd5fbdecf27e97fbe9d05fdb +Author: Roman Mashak <romez777@gmail.com> +Date: Tue Oct 21 03:01:41 2008 -0700 + + ARM/Versatile port: Removed unused functions + + Removal of never used functions. + + Signed-off-by: Roman Mashak <romez777@gmail.com> + +commit 1266df887781c779deaf6d05eea2ef90a470cb34 +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Mon Nov 3 15:44:01 2008 -0600 + + powerpc: change 86xx SMP boot method + + We put the bootpg for the secondary cpus into memory and use + BPTR to get to it. This is a step towards converting to the + ePAPR boot methodology. Also, the code is written to + deal properly with more than 4GB of RAM. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit b5431560682d8f318fbc49db87cfe13ab41d2ee4 +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Fri Oct 31 17:13:49 2008 -0500 + + 8641HPCN: Config file cleanup + + There are several items in the config file that were hardcoded + but that should really be based on other config options, since + the regions are contiguous and depend on being so. This cleans + that up a bit. Also, add BR_PHYS_ADDR() macro to convert + addresses into the proper format for BR registers. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit 4c77de3f144ca088c3867bd6240718c10f5a9d69 +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Fri Oct 31 17:13:32 2008 -0500 + + 86xx: Make dram_size a phys_size_t + + It's currently a long and should be phys_size_t. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit 104992fc541302a6bac74448e01e7fdad20abca0 +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Sun Nov 2 18:19:32 2008 -0600 + + powerpc 86xx: Handle CCSR relocation earlier + + Currently, the CCSR gets relocated while translation is + enabled, meaning we need 2 BAT translations to get to both the + old location and the new location. Also, the DEFAULT + CCSR location has a dependency on the BAT that maps the + FLASH region. Moving the relocation removes this unnecessary + dependency. This makes it easier and more intutive to + modify the board's memory map. + + Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same + BAT for CCSR space. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit af5d100e8d5cd49d69d52d20f1181eb06ddb4ddf +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Fri Oct 31 17:14:14 2008 -0500 + + mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build + + You can't actually have both, and with some coming changes to + change the memory map for the board and support 36-bit physical, + we need the extra BAT that is being consumed by having both. + + I also make non-PCI configs build cleanly, for the sake of sanity. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit 98693b85d42ff438375dc6d6dcadc70eb7b050bb +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Fri Oct 31 17:14:00 2008 -0500 + + mpc8641: Stop supporting non-PCI_PNP configs + + We don't actually ever do this, remove the code so we + can stop maintaining it. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + +commit e4f69d1bd21a12049744989d2dd6b5199c9b8f23 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Fri Oct 24 12:59:12 2008 +0000 + + ColdFire: Fix M5329EVB and M5373EVB nand issue + + Fix compilation issue caused by a few mismatches. + Provide proper nand chip select enable/disable in + nand_hwcontrol() rather than in board_nand_init() + just enable once. Remove redundant local nand driver + functions - nand_read_byte(), nand_write_byte() and + nand_dev_ready() to use common nand driver. + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit 1b2708442224a551a0b865b52710306333888932 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Oct 22 11:55:30 2008 +0000 + + ColdFire: Fix compilation error + + The error was caused by the change for strmhz() in cpu.c. + A few of them were one extra close parenthesis. + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit 536e7dac16769954915a484e682a2efb28699133 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Oct 22 11:38:21 2008 +0000 + + ColdFire: Add MCF5301x CPU and M53017EVB support + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit a21d0c2cc9add8894d971ab791f4032f077db817 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Tue Oct 21 15:37:02 2008 +0000 + + ColdFire: Add SBF support for M52277EVB + + Add serial boot support + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit b202816c61042c183fe67d097a5893b0f2dafba0 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Tue Oct 21 14:19:26 2008 +0000 + + ColdFire: Use CFI driver for M5272C3 + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit f3962d3f574e5a1cffacd4e9bc48713060a2a314 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Tue Oct 21 13:47:54 2008 +0000 + + ColdFire: Relocate FEC's GPIO and mii functions protocols + + Place FEC pin assignments in cpu_init.c from platform's + mii.c + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit 6e80f5aa09f8d41bac50b38dc7488ecd22107802 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Tue Oct 21 12:15:44 2008 +0000 + + ColdFire: Remove platforms mii.c file + + Will use mcfmii.c driver in drivers/net rather than + keep creating new mii.c for each future platform. + Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB, + M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB, + M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's + mii.c + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit 012522fef3b382469125beb46a315ab4dee02fb0 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Tue Oct 21 10:03:07 2008 +0000 + + ColdFire: Modules header files cleanup + + Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG, + MDHA, SKHA, INTC, and FlexBus structures and + definitions in immap_5xxx.h to more unify modules + header files. Append DSPI support for m547x_8x. + SSI cleanup. Remove USB Host structure from immap_539.h. + Apply changes to use FlexBus structures in mcf52x2's + cpu_init.c and platform configuration files. + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit ac2331aee99ad36be0fcfed8c49922e3c61b576d +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Tue Oct 21 08:52:36 2008 +0000 + + ColdFire: Remove linker file + + Each different build for M54455EVB and M5235EVB will + create a u-boot.lds linker file. It is redundant to + keep the u-boot.lds + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit 0829323073c505556ed5f5073f91adb504584d45 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Fri Oct 31 11:26:44 2008 -0500 + + ppc: Fix compile warnings when !CONFIG_OF_LIBFDT + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit a80b21d5127583171d6e9bc7f722947641898012 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Fri Oct 31 12:12:12 2008 +0100 + + common/Makefile: create others group for non core, environment and command files + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 60c68d9c1c6d18ce02c862a05718fd94f97c13d0 +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Oct 31 01:13:37 2008 +0100 + + TQM8260: use CFI flash driver instead of custom driver. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 20d04774f4ef3f6e38974636e0e36ae0f0b5501f +Author: Andy Fleming <afleming@freescale.com> +Date: Thu Oct 30 17:35:30 2008 -0500 + + Consolidate MAX/MIN definitions + + There were several, now there is one (two if you count the lower-case + versions). + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 298e476c66fd88d0bc4f0371118652d2b5de4e8a +Author: Heiko Schocher <hs@denx.de> +Date: Thu Oct 30 09:23:09 2008 +0100 + + mgsuvd: remove unused defines in config file. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 3cbd823116ea8b7c654e275a8c2fca87cd1f5dc5 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Nov 2 16:14:22 2008 +0100 + + Coding Style cleanup, update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit a47f957ab523019992fdef857af01bd71c58a4da Author: Alessandro Rubini <rubini-list@gnudd.com> Date: Fri Oct 31 22:33:21 2008 +0100 @@ -463,7 +463,8 @@ $(obj)include/autoconf.mk: $(obj)include/config.h set -e ; \ : Extract the config macros ; \ $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ - sed -n -f tools/scripts/define2mk.sed > $@ + sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ + mv $@.tmp $@ sinclude $(obj)include/autoconf.mk.dep diff --git a/board/afeb9260/partition.c b/board/afeb9260/partition.c index 0b5dc5e..be08f29 100644 --- a/board/afeb9260/partition.c +++ b/board/afeb9260/partition.c @@ -34,4 +34,3 @@ dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, {0x00008400, 0x00041FFF, FLAG_PROTECT_CLEAR, 0, "U-Boot"}, }; - diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c index 3f0dca0..16c9c7e 100644 --- a/board/esd/pmc440/cmd_pmc440.c +++ b/board/esd/pmc440/cmd_pmc440.c @@ -364,7 +364,7 @@ int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD; #endif /* - * gd->bd->bi_memsize == physical ram size - CFG_MEM_TOP_HIDE + * gd->bd->bi_memsize == physical ram size - CONFIG_SYS_MEM_TOP_HIDE */ param = base - (pram << 10); printf("PARAM: @%08x\n", param); diff --git a/board/xilinx/ppc405-generic/u-boot-ram.lds b/board/xilinx/ppc405-generic/u-boot-ram.lds index 0004d61..6bbd3bd 100644 --- a/board/xilinx/ppc405-generic/u-boot-ram.lds +++ b/board/xilinx/ppc405-generic/u-boot-ram.lds @@ -127,7 +127,7 @@ SECTIONS *(COMMON) } - ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your configuration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); _end = . ; PROVIDE (end = .); diff --git a/board/xilinx/ppc405-generic/u-boot-rom.lds b/board/xilinx/ppc405-generic/u-boot-rom.lds index d2bac9f..d094006 100644 --- a/board/xilinx/ppc405-generic/u-boot-rom.lds +++ b/board/xilinx/ppc405-generic/u-boot-rom.lds @@ -137,7 +137,7 @@ SECTIONS *(COMMON) } - ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your configuration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); _end = . ; PROVIDE (end = .); diff --git a/common/cmd_mem.c b/common/cmd_mem.c index d7666c2..400cfd7 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -1175,7 +1175,6 @@ int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { unsigned long src, dst; unsigned long src_len = ~0UL, dst_len = ~0UL; - int err; switch (argc) { case 4: diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c index 4c35892..5c31f7b 100644 --- a/common/cmd_ubi.c +++ b/common/cmd_ubi.c @@ -601,7 +601,7 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(ubi, 6, 1, do_ubi, "ubi - ubi commands\n", - "part [nand|nor|onenand] [part]" + "part [nand|nor|onenand] [part]" " - Show or set current partition\n" "ubi info [l[ayout]]" " - Display volume and ubi layout information\n" diff --git a/common/env_sf.c b/common/env_sf.c index 1bbf93f..2f52e25 100644 --- a/common/env_sf.c +++ b/common/env_sf.c @@ -27,6 +27,7 @@ */ #include <common.h> #include <environment.h> +#include <malloc.h> #include <spi_flash.h> #ifndef CONFIG_ENV_SPI_BUS @@ -60,13 +61,30 @@ uchar env_get_char_spec(int index) int saveenv(void) { + u32 saved_size, saved_offset; + char *saved_buffer = NULL; u32 sector = 1; + int ret; if (!env_flash) { puts("Environment SPI flash not initialized\n"); return 1; } + /* Is the sector larger than the env (i.e. embedded) */ + if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) { + saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE; + saved_offset = CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE; + saved_buffer = malloc(saved_size); + if (!saved_buffer) { + ret = 1; + goto done; + } + ret = spi_flash_read(env_flash, saved_offset, saved_size, saved_buffer); + if (ret) + goto done; + } + if (CONFIG_ENV_SIZE > CONFIG_ENV_SECT_SIZE) { sector = CONFIG_ENV_SIZE / CONFIG_ENV_SECT_SIZE; if (CONFIG_ENV_SIZE % CONFIG_ENV_SECT_SIZE) @@ -74,15 +92,28 @@ int saveenv(void) } puts("Erasing SPI flash..."); - if (spi_flash_erase(env_flash, CONFIG_ENV_OFFSET, sector * CONFIG_ENV_SECT_SIZE)) - return 1; + ret = spi_flash_erase(env_flash, CONFIG_ENV_OFFSET, sector * CONFIG_ENV_SECT_SIZE); + if (ret) + goto done; puts("Writing to SPI flash..."); - if (spi_flash_write(env_flash, CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, env_ptr)) - return 1; + ret = spi_flash_write(env_flash, CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, env_ptr); + if (ret) + goto done; + + if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) { + ret = spi_flash_write(env_flash, saved_offset, saved_size, saved_buffer); + if (ret) + goto done; + } + ret = 0; puts("done\n"); - return 0; + + done: + if (saved_buffer) + free(saved_buffer); + return ret; } void env_relocate_spec(void) diff --git a/common/image.c b/common/image.c index 866edf6..daa68bc 100644 --- a/common/image.c +++ b/common/image.c @@ -1071,6 +1071,7 @@ int boot_ramdisk_high (struct lmb *lmb, ulong rd_data, ulong rd_len, error: return -1; } +#endif /* defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC) */ #ifdef CONFIG_OF_LIBFDT static void fdt_error (const char *msg) @@ -1575,6 +1576,7 @@ error: } #endif /* CONFIG_OF_LIBFDT */ +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) /** * boot_get_cmdline - allocate and initialize kernel cmdline * @lmb: pointer to lmb handle, will be used for memory mgmt diff --git a/cpu/arm720t/config.mk b/cpu/arm720t/config.mk index 641b91c..3cae1dc 100644 --- a/cpu/arm720t/config.mk +++ b/cpu/arm720t/config.mk @@ -32,4 +32,5 @@ PLATFORM_CPPFLAGS += -march=armv4 -mtune=arm7tdmi # # ========================================================================= PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/arm920t/at91rm9200/i2c.c b/cpu/arm920t/at91rm9200/i2c.c index b68c5dd..9fd72d3 100644 --- a/cpu/arm920t/at91rm9200/i2c.c +++ b/cpu/arm920t/at91rm9200/i2c.c @@ -189,20 +189,6 @@ i2c_init(int speed, int slaveaddr) return; } -uchar i2c_reg_read(uchar i2c_addr, uchar reg) -{ - unsigned char buf; - - i2c_read(i2c_addr, reg, 1, &buf, 1); - - return(buf); -} - -void i2c_reg_write(uchar i2c_addr, uchar reg, uchar val) -{ - i2c_write(i2c_addr, reg, 1, &val, 1); -} - int i2c_set_bus_speed(unsigned int speed) { return -1; diff --git a/cpu/arm920t/config.mk b/cpu/arm920t/config.mk index 8db4adb..38718a3 100644 --- a/cpu/arm920t/config.mk +++ b/cpu/arm920t/config.mk @@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv4 # # ========================================================================= PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/arm925t/config.mk b/cpu/arm925t/config.mk index 8db4adb..38718a3 100644 --- a/cpu/arm925t/config.mk +++ b/cpu/arm925t/config.mk @@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv4 # # ========================================================================= PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/arm926ejs/at91/usb.c b/cpu/arm926ejs/at91/usb.c index 2f5c337..a15ab16 100644 --- a/cpu/arm926ejs/at91/usb.c +++ b/cpu/arm926ejs/at91/usb.c @@ -35,7 +35,7 @@ int usb_cpu_init(void) #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ defined(CONFIG_AT91SAM9263) /* Enable PLLB */ - at91_sys_write(AT91_CKGR_PLLBR, CFG_AT91_PLLB); + at91_sys_write(AT91_CKGR_PLLBR, CONFIG_SYS_AT91_PLLB); while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) ; #endif diff --git a/cpu/arm926ejs/config.mk b/cpu/arm926ejs/config.mk index 84b68ae..a57d03a 100644 --- a/cpu/arm926ejs/config.mk +++ b/cpu/arm926ejs/config.mk @@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv5te # # ========================================================================= PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/arm926ejs/davinci/i2c.c b/cpu/arm926ejs/davinci/i2c.c index d220a4c..3ba20ef 100644 --- a/cpu/arm926ejs/davinci/i2c.c +++ b/cpu/arm926ejs/davinci/i2c.c @@ -331,21 +331,4 @@ int i2c_write(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len) return(0); } - -u_int8_t i2c_reg_read(u_int8_t chip, u_int8_t reg) -{ - u_int8_t tmp; - - i2c_read(chip, reg, 1, &tmp, 1); - return(tmp); -} - - -void i2c_reg_write(u_int8_t chip, u_int8_t reg, u_int8_t val) -{ - u_int8_t tmp; - - i2c_write(chip, reg, 1, &tmp, 1); -} - #endif /* CONFIG_DRIVER_DAVINCI_I2C */ diff --git a/cpu/arm946es/config.mk b/cpu/arm946es/config.mk index f774c7e..6190e16 100644 --- a/cpu/arm946es/config.mk +++ b/cpu/arm946es/config.mk @@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv4 # # ========================================================================= PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/arm_intcm/config.mk b/cpu/arm_intcm/config.mk index f774c7e..6190e16 100644 --- a/cpu/arm_intcm/config.mk +++ b/cpu/arm_intcm/config.mk @@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv4 # # ========================================================================= PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/blackfin/i2c.c b/cpu/blackfin/i2c.c index 60f03d4..2a3e223 100644 --- a/cpu/blackfin/i2c.c +++ b/cpu/blackfin/i2c.c @@ -425,20 +425,4 @@ int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len) } -uchar i2c_reg_read(uchar chip, uchar reg) -{ - uchar buf; - - PRINTD("i2c_reg_read: chip=0x%02x, reg=0x%02x\n", chip, reg); - i2c_read(chip, reg, 0, &buf, 1); - return (buf); -} - -void i2c_reg_write(uchar chip, uchar reg, uchar val) -{ - PRINTD("i2c_reg_write: chip=0x%02x, reg=0x%02x, val=0x%02x\n", chip, - reg, val); - i2c_write(chip, reg, 0, &val, 1); -} - #endif /* CONFIG_HARD_I2C */ diff --git a/cpu/lh7a40x/config.mk b/cpu/lh7a40x/config.mk index 10e755b..32fd1d1 100644 --- a/cpu/lh7a40x/config.mk +++ b/cpu/lh7a40x/config.mk @@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv4 # # ======================================================================== PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 18308c8..66f9164 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -131,7 +131,7 @@ void cpu_init_f(void) mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */ mbar2_writeByte(MCFSIM_SPURVEC, 0x00); - /*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); *//* Enable a 1 cycle pre-drive cycle on CS1 */ + /*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); */ /* Enable a 1 cycle pre-drive cycle on CS1 */ /* FlexBus Chipselect */ init_fbcs(); diff --git a/cpu/mpc512x/i2c.c b/cpu/mpc512x/i2c.c index 77a6f0d..4f6bc86 100644 --- a/cpu/mpc512x/i2c.c +++ b/cpu/mpc512x/i2c.c @@ -382,23 +382,6 @@ Done: return ret; } -uchar i2c_reg_read (uchar chip, uchar reg) -{ - uchar buf; - - i2c_read (chip, reg, 1, &buf, 1); - - return buf; -} - -void i2c_reg_write (uchar chip, uchar reg, uchar val) -{ - i2c_write (chip, reg, 1, &val, 1); - - return; -} - - int i2c_set_bus_num (unsigned int bus) { if (bus >= I2C_BUS_CNT) { diff --git a/cpu/mpc5xxx/i2c.c b/cpu/mpc5xxx/i2c.c index 4d16bbe..7d76274 100644 --- a/cpu/mpc5xxx/i2c.c +++ b/cpu/mpc5xxx/i2c.c @@ -380,20 +380,4 @@ Done: return ret; } -uchar i2c_reg_read(uchar chip, uchar reg) -{ - uchar buf; - - i2c_read(chip, reg, 1, &buf, 1); - - return buf; -} - -void i2c_reg_write(uchar chip, uchar reg, uchar val) -{ - i2c_write(chip, reg, 1, &val, 1); - - return; -} - #endif /* CONFIG_HARD_I2C */ diff --git a/cpu/mpc8220/i2c.c b/cpu/mpc8220/i2c.c index d67936d..76ecdf1 100644 --- a/cpu/mpc8220/i2c.c +++ b/cpu/mpc8220/i2c.c @@ -387,20 +387,4 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buf, int len) return ret; } -uchar i2c_reg_read (uchar chip, uchar reg) -{ - uchar buf; - - i2c_read (chip, reg, 1, &buf, 1); - - return buf; -} - -void i2c_reg_write (uchar chip, uchar reg, uchar val) -{ - i2c_write (chip, reg, 1, &val, 1); - - return; -} - #endif /* CONFIG_HARD_I2C */ diff --git a/cpu/mpc824x/drivers/i2c/i2c.c b/cpu/mpc824x/drivers/i2c/i2c.c index 854345e..637ae4c 100644 --- a/cpu/mpc824x/drivers/i2c/i2c.c +++ b/cpu/mpc824x/drivers/i2c/i2c.c @@ -267,18 +267,4 @@ int i2c_probe (uchar chip) return i2c_read (chip, 0, 1, (uchar *) &tmp, 1); } -uchar i2c_reg_read (uchar i2c_addr, uchar reg) -{ - uchar buf[1]; - - i2c_read (i2c_addr, reg, 1, buf, 1); - - return (buf[0]); -} - -void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val) -{ - i2c_write (i2c_addr, reg, 1, &val, 1); -} - #endif /* CONFIG_HARD_I2C */ diff --git a/cpu/mpc8260/i2c.c b/cpu/mpc8260/i2c.c index c124639..35cf8f1 100644 --- a/cpu/mpc8260/i2c.c +++ b/cpu/mpc8260/i2c.c @@ -753,22 +753,6 @@ i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) return 0; } -uchar -i2c_reg_read(uchar chip, uchar reg) -{ - uchar buf; - - i2c_read(chip, reg, 1, &buf, 1); - - return (buf); -} - -void -i2c_reg_write(uchar chip, uchar reg, uchar val) -{ - i2c_write(chip, reg, 1, &val, 1); -} - #if defined(CONFIG_I2C_MULTI_BUS) /* * Functions for multiple I2C bus handling diff --git a/cpu/mpc86xx/release.S b/cpu/mpc86xx/release.S index b524e50..95efbb4 100644 --- a/cpu/mpc86xx/release.S +++ b/cpu/mpc86xx/release.S @@ -125,7 +125,7 @@ invl2: mtspr HID0, r5 /* enable + invalidate */ mtspr HID0, r3 /* enable */ sync -#ifdef CFG_L2 +#ifdef CONFIG_SYS_L2 sync lis r3, L2_ENABLE@h ori r3, r3, L2_ENABLE@l diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S index 6645cb8..63cc8db 100644 --- a/cpu/mpc86xx/start.S +++ b/cpu/mpc86xx/start.S @@ -982,5 +982,3 @@ unlock_ram_in_cache: blr #endif #endif - - diff --git a/cpu/mpc8xx/i2c.c b/cpu/mpc8xx/i2c.c index 29c7c71..338caba 100644 --- a/cpu/mpc8xx/i2c.c +++ b/cpu/mpc8xx/i2c.c @@ -42,19 +42,6 @@ DECLARE_GLOBAL_DATA_PTR; /* define to enable debug messages */ #undef DEBUG_I2C -/*----------------------------------------------------------------------- - * Set default values - */ -#ifndef CONFIG_SYS_I2C_SPEED -#define CONFIG_SYS_I2C_SPEED 50000 -#endif - -#ifndef CONFIG_SYS_I2C_SLAVE -#define CONFIG_SYS_I2C_SLAVE 0xFE -#endif -/*----------------------------------------------------------------------- - */ - /* tx/rx timeout (we need the i2c early, so we don't use get_timer()) */ #define TOUT_LOOP 1000000 @@ -717,24 +704,4 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) return 0; } -uchar -i2c_reg_read(uchar i2c_addr, uchar reg) -{ - uchar buf; - - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - - i2c_read(i2c_addr, reg, 1, &buf, 1); - - return (buf); -} - -void -i2c_reg_write(uchar i2c_addr, uchar reg, uchar val) -{ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - - i2c_write(i2c_addr, reg, 1, &val, 1); -} - #endif /* CONFIG_HARD_I2C */ diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index 1f0b56c..d09c4c2 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -706,4 +706,3 @@ int cpu_eth_init(bd_t *bis) #endif return 0; } - diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c index 9073ee2..9d416ca 100644 --- a/cpu/ppc4xx/i2c.c +++ b/cpu/ppc4xx/i2c.c @@ -419,26 +419,6 @@ int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len) return (i2c_transfer(0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0); } -/*----------------------------------------------------------------------- - * Read a register - */ -uchar i2c_reg_read(uchar i2c_addr, uchar reg) -{ - uchar buf; - - i2c_read(i2c_addr, reg, 1, &buf, 1); - - return (buf); -} - -/*----------------------------------------------------------------------- - * Write a register - */ -void i2c_reg_write(uchar i2c_addr, uchar reg, uchar val) -{ - i2c_write(i2c_addr, reg, 1, &val, 1); -} - #if defined(CONFIG_I2C_MULTI_BUS) /* * Functions for multiple I2C bus handling diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 4b5349e..f2b8908 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -727,7 +727,7 @@ _start: ori r2,r2,0xffff mfdcr r1,ISRAM1_DPC and r1,r1,r2 /* Disable parity check */ - mtdcr ISRAM1_DPC,r1 + mtdcr ISRAM1_DPC,r1 mfdcr r1,ISRAM1_PMEG and r1,r1,r2 /* Disable pwr mgmt */ mtdcr ISRAM1_PMEG,r1 diff --git a/cpu/pxa/config.mk b/cpu/pxa/config.mk index f0b86b7..af910e2 100644 --- a/cpu/pxa/config.mk +++ b/cpu/pxa/config.mk @@ -32,4 +32,5 @@ PLATFORM_CPPFLAGS += -march=armv5te -mtune=xscale # # ======================================================================== PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/pxa/i2c.c b/cpu/pxa/i2c.c index 08042be..6b72ba1 100644 --- a/cpu/pxa/i2c.c +++ b/cpu/pxa/i2c.c @@ -455,19 +455,4 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) } -uchar i2c_reg_read (uchar chip, uchar reg) -{ - uchar buf; - - PRINTD(("i2c_reg_read(chip=0x%02x, reg=0x%02x)\n",chip,reg)); - i2c_read(chip, reg, 1, &buf, 1); - return (buf); -} - -void i2c_reg_write(uchar chip, uchar reg, uchar val) -{ - PRINTD(("i2c_reg_write(chip=0x%02x, reg=0x%02x, val=0x%02x)\n",chip,reg,val)); - i2c_write(chip, reg, 1, &val, 1); -} - #endif /* CONFIG_HARD_I2C */ diff --git a/cpu/s3c44b0/config.mk b/cpu/s3c44b0/config.mk index 6dc9c46..01e7040 100644 --- a/cpu/s3c44b0/config.mk +++ b/cpu/s3c44b0/config.mk @@ -32,4 +32,5 @@ PLATFORM_CPPFLAGS += -march=armv4 -mtune=arm7tdmi -msoft-float # # ======================================================================== PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/sa1100/config.mk b/cpu/sa1100/config.mk index 5be7dfb..9ef4a19 100644 --- a/cpu/sa1100/config.mk +++ b/cpu/sa1100/config.mk @@ -32,4 +32,5 @@ PLATFORM_CPPFLAGS += -march=armv4 -mtune=strongarm1100 # # ======================================================================== PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index 3b5c06b..ce646fd 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -367,22 +367,6 @@ i2c_probe(uchar chip) return i2c_read(chip, 0, 0, NULL, 0); } -uchar -i2c_reg_read(uchar i2c_addr, uchar reg) -{ - uchar buf[1]; - - i2c_read(i2c_addr, reg, 1, buf, 1); - - return buf[0]; -} - -void -i2c_reg_write(uchar i2c_addr, uchar reg, uchar val) -{ - i2c_write(i2c_addr, reg, 1, &val, 1); -} - int i2c_set_bus_num(unsigned int bus) { #ifdef CONFIG_SYS_I2C2_OFFSET diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index d2a5142..a27de5a 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -434,23 +434,3 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) send_stop(); return(failures); } - -/*----------------------------------------------------------------------- - * Read a register - */ -uchar i2c_reg_read(uchar i2c_addr, uchar reg) -{ - uchar buf; - - i2c_read(i2c_addr, reg, 1, &buf, 1); - - return(buf); -} - -/*----------------------------------------------------------------------- - * Write a register - */ -void i2c_reg_write(uchar i2c_addr, uchar reg, uchar val) -{ - i2c_write(i2c_addr, reg, 1, &val, 1); -} diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c index b8b835a..86324e4 100644 --- a/drivers/mtd/spi/stmicro.c +++ b/drivers/mtd/spi/stmicro.c @@ -137,7 +137,7 @@ static int stmicro_wait_ready(struct spi_flash *flash, unsigned long timeout) ret = spi_xfer(spi, 32, &cmd[0], NULL, SPI_XFER_BEGIN); if (ret) { - debug("SF: Failed to send command %02x: %d\n", cmd, ret); + debug("SF: Failed to send command %02x: %d\n", cmd[0], ret); return ret; } diff --git a/drivers/mtd/ubi/crc32.c b/drivers/mtd/ubi/crc32.c index 5273ca3..a7e26b0 100644 --- a/drivers/mtd/ubi/crc32.c +++ b/drivers/mtd/ubi/crc32.c @@ -97,7 +97,7 @@ u32 crc32_le(u32 crc, unsigned char const *p, size_t len) # else # define DO_CRC(x) crc = tab[ ((crc >> 24) ^ (x)) & 255] ^ (crc<<8) # endif - //printf("Crc32_le crc=%x\n",crc); + /* printf("Crc32_le crc=%x\n",crc); */ crc = __cpu_to_le32(crc); /* Align it */ if((((long)b)&3 && len)){ diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index 2d44f23..8423894 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -186,7 +186,7 @@ retry: if (read != len && err == -EBADMSG) { ubi_assert(0); printk("%s[%d] not here\n", __func__, __LINE__); -// err = -EIO; +/* err = -EIO; */ } } else { ubi_assert(len == read); diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c index a87a2f3..061da64 100644 --- a/drivers/mtd/ubi/vmt.c +++ b/drivers/mtd/ubi/vmt.c @@ -260,7 +260,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) goto out_unlock; } - /* Calculate how many eraseblocks are requested */ + /* Calculate how many eraseblocks are requested */ vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment; bytes = req->bytes; if (do_div(bytes, vol->usable_leb_size)) diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c index be7c1a1..11b66ab 100644 --- a/fs/jffs2/jffs2_1pass.c +++ b/fs/jffs2/jffs2_1pass.c @@ -119,6 +119,7 @@ #include <watchdog.h> #include <jffs2/jffs2.h> #include <jffs2/jffs2_1pass.h> +#include <linux/mtd/compat.h> #include "jffs2_private.h" @@ -1408,11 +1409,6 @@ dump_dirents(struct b_lists *pL) } #endif -#define min_t(type, x, y) ({ \ - type __min1 = (x); \ - type __min2 = (y); \ - __min1 < __min2 ? __min1: __min2; }) - #define DEFAULT_EMPTY_SCAN_SIZE 4096 static inline uint32_t EMPTY_SCAN_SIZE(uint32_t sector_size) diff --git a/include/addr_map.h b/include/addr_map.h new file mode 100644 index 0000000..d55f5f6 --- /dev/null +++ b/include/addr_map.h @@ -0,0 +1,29 @@ +#ifndef __ADDR_MAP_H +#define __ADDR_MAP_H + +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/types.h> + +extern phys_addr_t addrmap_virt_to_phys(void *vaddr); +extern unsigned long addrmap_phys_to_virt(phys_addr_t paddr); +extern void addrmap_set_entry(unsigned long vaddr, phys_addr_t paddr, + phys_size_t size, int idx); + +#endif diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index f4ae307..fec3a7e 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -57,6 +57,11 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + /* * Generic virtual read/write. Note that we don't support half-word * read/writes. We define __arch_*[bl] here, and leave __arch_*w diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h index 06e52b1..d22cd35 100644 --- a/include/asm-avr32/io.h +++ b/include/asm-avr32/io.h @@ -125,4 +125,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long len) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + #endif /* __ASM_AVR32_IO_H */ diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index da58914..6806494 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -64,6 +64,11 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + /* * These are for ISA/PCI shared memory _only_ and should never be used * on any other type of memory, including Zorro memory. They are meant to diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h index 2c57140..9b757d4 100644 --- a/include/asm-i386/io.h +++ b/include/asm-i386/io.h @@ -229,4 +229,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + #endif diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h index 1fccc12..50ea087 100644 --- a/include/asm-m68k/io.h +++ b/include/asm-m68k/io.h @@ -251,4 +251,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + #endif /* __ASM_M68K_IO_H__ */ diff --git a/include/asm-microblaze/io.h b/include/asm-microblaze/io.h index 8804724..7e190d1 100644 --- a/include/asm-microblaze/io.h +++ b/include/asm-microblaze/io.h @@ -155,4 +155,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + #endif /* __MICROBLAZE_IO_H__ */ diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index 3a0f33f..031186d 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -118,7 +118,7 @@ static inline void set_io_port_base(unsigned long base) * Change virtual addresses to physical addresses and vv. * These are trivial on the 1:1 Linux/MIPS mapping */ -extern inline unsigned long virt_to_phys(volatile void * address) +extern inline phys_addr_t virt_to_phys(void * address) { return CPHYSADDR(address); } diff --git a/include/asm-nios/io.h b/include/asm-nios/io.h index 8b78806..899682c 100644 --- a/include/asm-nios/io.h +++ b/include/asm-nios/io.h @@ -133,4 +133,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + #endif /* __ASM_NIOS_IO_H_ */ diff --git a/include/asm-nios2/io.h b/include/asm-nios2/io.h index 2f1ec26..01d11ef 100644 --- a/include/asm-nios2/io.h +++ b/include/asm-nios2/io.h @@ -53,6 +53,11 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + extern unsigned char inb (unsigned char *port); extern unsigned short inw (unsigned short *port); extern unsigned inl (unsigned port); diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index c349681..64cb746 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -298,4 +298,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)((unsigned long)vaddr); +} + #endif diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h index adc3f81..ca598a6 100644 --- a/include/asm-sh/io.h +++ b/include/asm-sh/io.h @@ -261,5 +261,10 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + #endif /* __KERNEL__ */ #endif /* __ASM_SH_IO_H */ diff --git a/include/asm-sparc/io.h b/include/asm-sparc/io.h index 5f8d05c..0c5d86c 100644 --- a/include/asm-sparc/io.h +++ b/include/asm-sparc/io.h @@ -90,4 +90,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + #endif diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h index 1b74526..7ee05e5 100644 --- a/include/configs/ATUM8548.h +++ b/include/configs/ATUM8548.h @@ -67,7 +67,6 @@ */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */ /* diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 5a99d5f..532c3df 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -70,7 +70,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_ENABLE_36BIT_PHYS 1 diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 0b8fe6a..f22b752 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -79,7 +79,6 @@ */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ #define CONFIG_SYS_MEMTEST_END 0x00400000 diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 21cf965..5ac1916 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -62,7 +62,6 @@ /* below can be toggled for performance analysis. otherwise use default */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #undef CONFIG_BTB /* toggle branch predition */ -#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index eaa737b..399189c 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -63,7 +63,6 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index b31c2bb..9b1b34c 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -66,7 +66,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ /* * Only possible on E500 Version 2 or newer cores. diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 7a7e5a1..e1bd45e 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -69,7 +69,6 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */ /* diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 40b40ed..c92f82d 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -63,7 +63,6 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 2b5b2c1..bf4bd2c 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -73,7 +73,6 @@ */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 8bdec65..da1f454 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -61,7 +61,6 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ /* * Only possible on E500 Version 2 or newer cores. diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 9a66ca8..37c3f42 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -71,7 +71,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_ENABLE_36BIT_PHYS 1 diff --git a/include/configs/PM854.h b/include/configs/PM854.h index 1cc80ad..41e290d 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -71,7 +71,6 @@ */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 698ad2d..6b4e2dd 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -72,7 +72,6 @@ */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 7219bb8..f9f1002 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -219,8 +219,8 @@ #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ #endif -#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ - /* 440EPx errata CHIP 11 */ +#define CONFIG_SYS_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ + /* 440EPx errata CHIP 11 */ /*----------------------------------------------------------------------- * I2C @@ -490,8 +490,8 @@ #endif /* Memory Bank 1 (RESET) initialization */ -#define CFG_EBC_PB1AP 0x7f817200 //0x03017200 -#define CFG_EBC_PB1CR (CFG_RESET_BASE | 0x1c000) +#define CONFIG_SYS_EBC_PB1AP 0x7f817200 /* 0x03017200 */ +#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_RESET_BASE | 0x1c000) /* Memory Bank 4 (FPGA / 32Bit) initialization */ #define CONFIG_SYS_EBC_PB4AP 0x03840f40 /* BME=0,TWT=7,CSN=1,TH=7,RE=1,SOR=0,BEM=1 */ diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index 2853fba..3419631 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -75,7 +75,6 @@ /* below can be toggled for performance analysis. otherwise use default */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #undef CONFIG_BTB /* toggle branch predition */ -#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 300f490..6d205a7 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -106,7 +106,6 @@ */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */ diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index f077ad9..d63a1a0 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -29,7 +29,7 @@ /* ARM asynchronous clock */ #define AT91_MAIN_CLOCK 18429952 /* from 18.432 MHz crystal */ #define AT91_MASTER_CLOCK 89999598 /* peripheral = main / 2 */ -#define CFG_AT91_PLLB 0x107c3e18 /* PLLB settings for USB */ +#define CONFIG_SYS_AT91_PLLB 0x107c3e18 /* PLLB settings for USB */ #define CONFIG_SYS_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ @@ -150,7 +150,7 @@ #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CFG_LONGHELP 1 +#define CONFIG_SYS_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 #define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) @@ -167,4 +167,3 @@ #endif #endif - diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index aeb06ac..363df67 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -32,7 +32,7 @@ #define AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ #define AT91_MASTER_CLOCK 100000000 /* peripheral */ #define AT91_CPU_CLOCK 200000000 /* cpu */ -#define CFG_AT91_PLLB 0x10073e01 /* PLLB settings for USB */ +#define CONFUG_SYS_AT91_PLLB 0x10073e01 /* PLLB settings for USB */ #define CONFIG_SYS_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 2df8d54..1538929 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -32,7 +32,7 @@ #define AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ #define AT91_MASTER_CLOCK 100000000 /* peripheral */ #define AT91_CPU_CLOCK 200000000 /* cpu */ -#define CFG_AT91_PLLB 0x107c3e18 /* PLLB settings for USB */ +#define CONFIG_SYS_AT91_PLLB 0x107c3e18 /* PLLB settings for USB */ #define CONFIG_SYS_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index fc7c941..d9ebc87 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -32,7 +32,7 @@ #define AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ #define AT91_MASTER_CLOCK 100000000 /* peripheral */ #define AT91_CPU_CLOCK 200000000 /* cpu */ -#define CFG_AT91_PLLB 0x133a3e8d /* PLLB settings for USB */ +#define CONFIG_SYS_AT91_PLLB 0x133a3e8d /* PLLB settings for USB */ #define CONFIG_SYS_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 5ce4dac..528c810 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -59,7 +59,6 @@ */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */ /* diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index e1d3a52..d4e9d74 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -69,7 +69,6 @@ /* below can be toggled for performance analysis. otherwise use default */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #undef CONFIG_BTB /* toggle branch predition */ -#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index e89b5a3..cbf04e3 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -82,7 +82,6 @@ */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */ diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index a0f2ed0..ae6f45a 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -64,7 +64,6 @@ */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index f0990c6..c312f1a 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -64,7 +64,6 @@ */ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ diff --git a/include/i2c.h b/include/i2c.h index 8d6f867..fad2d57 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -76,6 +76,20 @@ # define I2C_SOFT_DECLARATIONS # endif #endif + +#ifdef CONFIG_8xx +/* Set default values for the I2C bus speed and slave address on 8xx. In the + * future, we'll define these in all 8xx board config files. + */ +#ifndef CONFIG_SYS_I2C_SPEED +#define CONFIG_SYS_I2C_SPEED 50000 +#endif + +#ifndef CONFIG_SYS_I2C_SLAVE +#define CONFIG_SYS_I2C_SLAVE 0xFE +#endif +#endif + /* * Initialization, must be called once on start up, may be called * repeatedly to change the speed and slave addresses. @@ -132,8 +146,52 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len); /* * Utility routines to read/write registers. */ -uchar i2c_reg_read (uchar chip, uchar reg); -void i2c_reg_write(uchar chip, uchar reg, uchar val); +static inline u8 i2c_reg_read(u8 addr, u8 reg) +{ + u8 buf; + +#ifdef CONFIG_8xx + /* MPC8xx needs this. Maybe one day we can get rid of it. */ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif + +#ifdef DEBUG + printf("%s: addr=0x%02x, reg=0x%02x\n", __func__, addr, reg); +#endif + +#ifdef CONFIG_BLACKFIN + /* This ifdef will become unneccessary in a future version of the + * blackfin I2C driver. + */ + i2c_read(addr, reg, 0, &buf, 1); +#else + i2c_read(addr, reg, 1, &buf, 1); +#endif + + return buf; +} + +static inline void i2c_reg_write(u8 addr, u8 reg, u8 val) +{ +#ifdef CONFIG_8xx + /* MPC8xx needs this. Maybe one day we can get rid of it. */ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif + +#ifdef DEBUG + printf("%s: addr=0x%02x, reg=0x%02x, val=0x%02x\n", + __func__, addr, reg, val); +#endif + +#ifdef CONFIG_BLACKFIN + /* This ifdef will become unneccessary in a future version of the + * blackfin I2C driver. + */ + i2c_write(addr, reg, 0, &val, 1); +#else + i2c_write(addr, reg, 1, &val, 1); +#endif +} /* * Functions for setting the current I2C bus and its speed diff --git a/include/image.h b/include/image.h index 5433555..4609200 100644 --- a/include/image.h +++ b/include/image.h @@ -50,10 +50,6 @@ #endif /* USE_HOSTCC */ -#if defined(CONFIG_FIT) && !defined(CONFIG_OF_LIBFDT) -#error "CONFIG_OF_LIBFDT not enabled, required by CONFIG_FIT!" -#endif - #include <command.h> #if defined(CONFIG_FIT) diff --git a/include/linux/crc32.h b/include/linux/crc32.h index e133157..ac4aed1 100644 --- a/include/linux/crc32.h +++ b/include/linux/crc32.h @@ -6,10 +6,10 @@ #define _LINUX_CRC32_H #include <linux/types.h> -//#include <linux/bitrev.h> +/* #include <linux/bitrev.h> */ extern u32 crc32_le(u32 crc, unsigned char const *p, size_t len); -//extern u32 crc32_be(u32 crc, unsigned char const *p, size_t len); +/* extern u32 crc32_be(u32 crc, unsigned char const *p, size_t len); */ #define crc32(seed, data, length) crc32_le(seed, (unsigned char const *)data, length) @@ -21,7 +21,7 @@ extern u32 crc32_le(u32 crc, unsigned char const *p, size_t len); * is in bit nr 0], thus it must be reversed before use. Except for * nics that bit swap the result internally... */ -//#define ether_crc(length, data) bitrev32(crc32_le(~0, data, length)) -//#define ether_crc_le(length, data) crc32_le(~0, data, length) +/* #define ether_crc(length, data) bitrev32(crc32_le(~0, data, length)) */ +/* #define ether_crc_le(length, data) crc32_le(~0, data, length) */ #endif /* _LINUX_CRC32_H */ diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index b41e5f5..1016675 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -76,9 +76,9 @@ struct device; struct device_node; int __devinit of_mtd_parse_partitions(struct device *dev, - struct mtd_info *mtd, - struct device_node *node, - struct mtd_partition **pparts); + struct mtd_info *mtd, + struct device_node *node, + struct mtd_partition **pparts); #endif #endif diff --git a/include/linux/mtd/ubi.h b/include/linux/mtd/ubi.h index a017891..4b3e06c 100644 --- a/include/linux/mtd/ubi.h +++ b/include/linux/mtd/ubi.h @@ -21,7 +21,7 @@ #ifndef __LINUX_UBI_H__ #define __LINUX_UBI_H__ -//#include <asm/ioctl.h> +/* #include <asm/ioctl.h> */ #include <linux/types.h> #include <mtd/ubi-user.h> diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h index 095dfc1..b415219 100644 --- a/include/ubi_uboot.h +++ b/include/ubi_uboot.h @@ -56,7 +56,7 @@ do { \ #define ubi_sysfs_close(...) do { } while (0) static inline int is_power_of_2(unsigned long n) { - return (n != 0 && ((n & (n - 1)) == 0)); + return (n != 0 && ((n & (n - 1)) == 0)); } /* FIXME */ diff --git a/lib_generic/Makefile b/lib_generic/Makefile index d62c39b..3f04022 100644 --- a/lib_generic/Makefile +++ b/lib_generic/Makefile @@ -25,6 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)libgeneric.a +COBJS-$(CONFIG_ADDR_MAP) += addr_map.o COBJS-y += bzlib.o COBJS-y += bzlib_crctable.o COBJS-y += bzlib_decompress.o diff --git a/lib_generic/addr_map.c b/lib_generic/addr_map.c new file mode 100644 index 0000000..ff8532c --- /dev/null +++ b/lib_generic/addr_map.c @@ -0,0 +1,81 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <addr_map.h> + +static struct { + phys_addr_t paddr; + phys_size_t size; + unsigned long vaddr; +} address_map[CONFIG_SYS_NUM_ADDR_MAP]; + +phys_addr_t addrmap_virt_to_phys(void * vaddr) +{ + int i; + + for (i = 0; i < CONFIG_SYS_NUM_ADDR_MAP; i++) { + u64 base, upper, addr; + + if (address_map[i].size == 0) + continue; + + addr = (u64)((u32)vaddr); + base = (u64)(address_map[i].vaddr); + upper = (u64)(address_map[i].size) + base - 1; + + if (addr >= base && addr <= upper) { + return addr - address_map[i].vaddr + address_map[i].paddr; + } + } + + return (phys_addr_t)(~0); +} + +unsigned long addrmap_phys_to_virt(phys_addr_t paddr) +{ + int i; + + for (i = 0; i < CONFIG_SYS_NUM_ADDR_MAP; i++) { + u64 base, upper, addr; + + if (address_map[i].size == 0) + continue; + + addr = (u64)paddr; + base = (u64)(address_map[i].paddr); + upper = (u64)(address_map[i].size) + base - 1; + + if (addr >= base && addr <= upper) { + return paddr - address_map[i].paddr + address_map[i].vaddr; + } + } + + return (unsigned long)(~0); +} + +void addrmap_set_entry(unsigned long vaddr, phys_addr_t paddr, + phys_size_t size, int idx) +{ + if (idx > CONFIG_SYS_NUM_ADDR_MAP) + return; + + address_map[idx].vaddr = vaddr; + address_map[idx].paddr = paddr; + address_map[idx].size = size; +} diff --git a/lib_ppc/cache.c b/lib_ppc/cache.c index 72c838e..1292b71 100644 --- a/lib_ppc/cache.c +++ b/lib_ppc/cache.c @@ -25,29 +25,27 @@ #include <asm/cache.h> #include <watchdog.h> -void flush_cache (ulong start_addr, ulong size) +void flush_cache(ulong start_addr, ulong size) { #ifndef CONFIG_5xx - ulong addr, end_addr = start_addr + size; + ulong addr, start, end; - if (CONFIG_SYS_CACHELINE_SIZE) { - addr = start_addr & (CONFIG_SYS_CACHELINE_SIZE - 1); - for (addr = start_addr; - addr < end_addr; - addr += CONFIG_SYS_CACHELINE_SIZE) { - asm ("dcbst 0,%0": :"r" (addr)); - WATCHDOG_RESET(); - } - asm ("sync"); /* Wait for all dcbst to complete on bus */ + start = start_addr & ~(CONFIG_SYS_CACHELINE_SIZE - 1); + end = start_addr + size - 1; - for (addr = start_addr; - addr < end_addr; - addr += CONFIG_SYS_CACHELINE_SIZE) { - asm ("icbi 0,%0": :"r" (addr)); - WATCHDOG_RESET(); - } + for (addr = start; addr <= end; addr += CONFIG_SYS_CACHELINE_SIZE) { + asm volatile("dcbst 0,%0" : : "r" (addr) : "memory"); + WATCHDOG_RESET(); } - asm ("sync"); /* Always flush prefetch queue in any case */ - asm ("isync"); + /* wait for all dcbst to complete on bus */ + asm volatile("sync" : : : "memory"); + + for (addr = start; addr <= end; addr += CONFIG_SYS_CACHELINE_SIZE) { + asm volatile("icbi 0,%0" : : "r" (addr) : "memory"); + WATCHDOG_RESET(); + } + asm volatile("sync" : : : "memory"); + /* flush prefetch queue */ + asm volatile("isync" : : : "memory"); #endif } diff --git a/libfdt/Makefile b/libfdt/Makefile index ca2ad76..d6e2830 100644 --- a/libfdt/Makefile +++ b/libfdt/Makefile @@ -27,9 +27,13 @@ LIB = $(obj)libfdt.a SOBJS = -COBJS-$(CONFIG_OF_LIBFDT) += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o +COBJS-libfdt += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o -COBJS := $(COBJS-y) +COBJS-$(CONFIG_OF_LIBFDT) += $(COBJS-libfdt) +COBJS-$(CONFIG_FIT) += $(COBJS-libfdt) + + +COBJS := $(sort $(COBJS-y)) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/post/Makefile b/post/Makefile index a402e6a..769e9c6 100644 --- a/post/Makefile +++ b/post/Makefile @@ -47,12 +47,17 @@ LIB := $(obj)$(LIB) all: $(LIB) +postdeps: + @for lib in $(SPLIB-y) ; do \ + $(MAKE) -C `dirname $$lib` all ; \ + done + # generic POST library $(GPLIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) # specific POST libraries -$(SPLIB): $(obj).depend +$(SPLIB): $(obj).depend postdeps $(MAKE) -C $(dir $(subst $(obj),,$@)) # the POST lib archive diff --git a/tools/env/fw_env.config b/tools/env/fw_env.config index 0fe37c9..c8f12cf 100644 --- a/tools/env/fw_env.config +++ b/tools/env/fw_env.config @@ -1,5 +1,5 @@ # Configuration file for fw_(printenv/saveenv) utility. -# Up to two entries are valid, in this case the redundand +# Up to two entries are valid, in this case the redundant # environment sector is assumed present. # Notice, that the "Number of sectors" is ignored on NOR. |