diff options
58 files changed, 237 insertions, 215 deletions
@@ -593,7 +593,6 @@ The following options need to be configured: except those marked below with a "*". CONFIG_CMD_ASKENV * ask for env variable - CONFIG_CMD_AUTOSCRIPT Autoscript Support CONFIG_CMD_BDI bdinfo CONFIG_CMD_BEDBUG * Include BedBug Debugger CONFIG_CMD_BMP * BMP support @@ -654,6 +653,7 @@ The following options need to be configured: (requires CONFIG_CMD_I2C) CONFIG_CMD_SETGETDCR Support for DCR Register access (4xx only) + CONFIG_CMD_SOURCE "source" command Support CONFIG_CMD_SPI * SPI serial bus support CONFIG_CMD_USB * USB support CONFIG_CMD_VFD * VFD support (TRAB) @@ -1789,7 +1789,7 @@ The following options need to be configured: Note: overly (ab)use of the default environment is discouraged. Make sure to check other ways to preset - the environment like the autoscript function or the + the environment like the "source" command or the boot command first. - DataFlash Support: @@ -1948,8 +1948,8 @@ Legacy uImage format: 81 common/cmd_net.c NetLoop() back without error -82 common/cmd_net.c size == 0 (File with size 0 loaded) 82 common/cmd_net.c trying automatic boot - 83 common/cmd_net.c running autoscript - -83 common/cmd_net.c some error in automatic boot or autoscript + 83 common/cmd_net.c running "source" command + -83 common/cmd_net.c some error in automatic boot or "source" command 84 common/cmd_net.c end without errors FIT uImage format: @@ -2952,7 +2952,7 @@ Some configuration options can be set using Environment Variables: autoscript - if set to "yes" commands like "loadb", "loady", "bootp", "tftpb", "rarpboot" and "nfs" will attempt to automatically run script images (by internally - calling "autoscript"). + calling "source"). autoscript_uname - if script image is in a format (FIT) this variable is used to get script subimage unit name. diff --git a/board/cray/L1/L1.c b/board/cray/L1/L1.c index 1c82bdf..8a06ecc 100644 --- a/board/cray/L1/L1.c +++ b/board/cray/L1/L1.c @@ -164,7 +164,7 @@ int misc_init_r (void) setenv ("ethaddr", e); } } - sprintf (bootcmd,"autoscript %X",(unsigned)bootscript); + sprintf (bootcmd,"source %X",(unsigned)bootscript); setenv ("bootcmd", bootcmd); return (0); } diff --git a/board/cray/L1/bootscript.hush b/board/cray/L1/bootscript.hush index ec4839b..f2f78ad 100644 --- a/board/cray/L1/bootscript.hush +++ b/board/cray/L1/bootscript.hush @@ -31,7 +31,7 @@ if printenv bootscript tftp $tftp_addr $bootcript if imi $tftp_addr then - autoscript $tftp_addr + source $tftp_addr fi fi diff --git a/board/esd/common/cmd_loadpci.c b/board/esd/common/cmd_loadpci.c index 0a6626e..c779f79 100644 --- a/board/esd/common/cmd_loadpci.c +++ b/board/esd/common/cmd_loadpci.c @@ -30,7 +30,7 @@ #if defined(CONFIG_CMD_BSP) extern int do_bootm (cmd_tbl_t *, int, int, char *[]); -extern int do_autoscript (cmd_tbl_t *, int, int, char *[]); +extern int do_source (cmd_tbl_t *, int, int, char *[]); #define ADDRMASK 0xfffff000 @@ -98,12 +98,12 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) case 1: /* - * Boot image via autoscr + * Boot image via "source" command */ printf("executing script at addr 0x%s ...\n", addr); local_args[0] = addr; local_args[1] = NULL; - do_autoscript(cmdtp, 0, 1, local_args); + do_source(cmdtp, 0, 1, local_args); break; case 2: diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c index 10d0df6..b9f3bdb 100644 --- a/board/pn62/cmd_pn62.c +++ b/board/pn62/cmd_pn62.c @@ -152,12 +152,13 @@ int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) rcode = do_bootm (cmdtp, 0, 1, local_args); } -#ifdef CONFIG_AUTOSCRIPT +#ifdef CONFIG_SOURCE if (load_addr) { char *s; if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) { - printf ("Running autoscript at addr 0x%08lX", load_addr); + printf ("Running "source" command at addr 0x%08lX", + load_addr); s = getenv ("autoscript_uname"); if (s) @@ -165,7 +166,7 @@ int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) else puts (" ...\n"); - rcode = autoscript (load_addr, s); + rcode = source (load_addr, s); } } #endif diff --git a/common/Makefile b/common/Makefile index 23171ca..eb8e283 100644 --- a/common/Makefile +++ b/common/Makefile @@ -61,8 +61,8 @@ COBJS-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o # command COBJS-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o -COBJS-$(CONFIG_AUTOSCRIPT) += cmd_autoscript.o -COBJS-$(CONFIG_CMD_AUTOSCRIPT) += cmd_autoscript.o +COBJS-$(CONFIG_SOURCE) += cmd_source.o +COBJS-$(CONFIG_CMD_SOURCE) += cmd_source.o COBJS-$(CONFIG_CMD_BDI) += cmd_bdinfo.o COBJS-$(CONFIG_CMD_BEDBUG) += bedbug.o cmd_bedbug.o COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o diff --git a/common/cmd_load.c b/common/cmd_load.c index 88fba88..d5eaac7 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -513,12 +513,13 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } } -#ifdef CONFIG_AUTOSCRIPT +#ifdef CONFIG_SOURCE if (load_addr) { char *s; if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) { - printf ("Running autoscript at addr 0x%08lX", load_addr); + printf ("Running "source" command at addr 0x%08lX", + load_addr); s = getenv ("autoscript_uname"); if (s) @@ -526,7 +527,7 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) else puts (" ...\n"); - rcode = autoscript (load_addr, s); + rcode = source (load_addr, s); } } #endif diff --git a/common/cmd_net.c b/common/cmd_net.c index a687849..9bef7a2 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -222,9 +222,10 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[]) rcode = do_bootm (cmdtp, 0, 1, local_args); } -#ifdef CONFIG_AUTOSCRIPT +#ifdef CONFIG_SOURCE if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) { - printf ("Running autoscript at addr 0x%08lX", load_addr); + printf ("Running "source" command at addr 0x%08lX", + load_addr); s = getenv ("autoscript_uname"); if (s) @@ -233,7 +234,7 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[]) puts (" ...\n"); show_boot_progress (83); - rcode = autoscript (load_addr, s); + rcode = source (load_addr, s); } #endif if (rcode < 0) diff --git a/common/cmd_autoscript.c b/common/cmd_source.c index e5a9bc0..43e1315 100644 --- a/common/cmd_autoscript.c +++ b/common/cmd_source.c @@ -22,15 +22,11 @@ */ /* - * autoscript allows a remote host to download a command file and, - * optionally, binary data for automatically updating the target. For - * example, you create a new kernel image and want the user to be - * able to simply download the image and the machine does the rest. - * The kernel image is postprocessed with mkimage, which creates an - * image with a script file prepended. If enabled, autoscript will - * verify the script and contents of the download and execute the - * script portion. This would be responsible for erasing flash, - * copying the new image, and rebooting the machine. + * The "source" command allows to define "script images", i. e. files + * that contain command sequences that can be executed by the command + * interpreter. It returns the exit status of the last command + * executed from the script. This is very similar to running a shell + * script in a UNIX shell, hence the name for the command. */ /* #define DEBUG */ @@ -48,7 +44,7 @@ #endif int -autoscript (ulong addr, const char *fit_uname) +source (ulong addr, const char *fit_uname) { ulong len; image_header_t *hdr; @@ -150,7 +146,7 @@ autoscript (ulong addr, const char *fit_uname) break; #endif default: - puts ("Wrong image format for autoscript\n"); + puts ("Wrong image format for \"source\" command\n"); return 1; } @@ -201,9 +197,9 @@ autoscript (ulong addr, const char *fit_uname) } /**************************************************/ -#if defined(CONFIG_CMD_AUTOSCRIPT) +#if defined(CONFIG_CMD_SOURCE) int -do_autoscript (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +do_source (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { ulong addr; int rcode; @@ -212,30 +208,49 @@ do_autoscript (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /* Find script image */ if (argc < 2) { addr = CONFIG_SYS_LOAD_ADDR; - debug ("* autoscr: default load address = 0x%08lx\n", addr); + debug ("* source: default load address = 0x%08lx\n", addr); #if defined(CONFIG_FIT) } else if (fit_parse_subimage (argv[1], load_addr, &addr, &fit_uname)) { - debug ("* autoscr: subimage '%s' from FIT image at 0x%08lx\n", + debug ("* source: subimage '%s' from FIT image at 0x%08lx\n", fit_uname, addr); #endif } else { addr = simple_strtoul(argv[1], NULL, 16); - debug ("* autoscr: cmdline image address = 0x%08lx\n", addr); + debug ("* source: cmdline image address = 0x%08lx\n", addr); } printf ("## Executing script at %08lx\n", addr); - rcode = autoscript (addr, fit_uname); + rcode = source (addr, fit_uname); return rcode; } U_BOOT_CMD( - autoscr, 2, 0, do_autoscript, + source, 2, 0, do_source, "run script from memory", - "[addr] - run script starting at addr" - " - A valid autoscr header must be present\n" + "[addr]\n" + "\t- run script starting at addr\n" + "\t- A valid image header must be present\n" #if defined(CONFIG_FIT) "For FIT format uImage addr must include subimage\n" "unit name in the form of addr:<subimg_uname>\n" #endif ); + +/* + * Keep for now for backward compatibility; + * remove later when support for "autoscr" goes away. + */ +static int +do_autoscr (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + printf ("\n### WARNING ### " + "\"autoscr\" is deprecated, use \"source\" instead ###\n\n"); + return do_source (cmdtp, flag, argc, argv); +} + +U_BOOT_CMD( + autoscr, 2, 0, do_autoscr, + "DEPRECATED - use \"source\" command instead", + "DEPRECATED - use \"source\" command instead\n" +); #endif diff --git a/doc/feature-removal-schedule.txt b/doc/feature-removal-schedule.txt index 10e63bf..f973403 100644 --- a/doc/feature-removal-schedule.txt +++ b/doc/feature-removal-schedule.txt @@ -8,12 +8,20 @@ file. --------------------------- What: "autoscr" command -When: August 2009 -Why: "autosrc" is an ugly and completely non-standard name. The "autoscr" - command is deprecated and will be replaced the "source" command as - used by other shells such as bash. Both commands will be supported - for a transition period of 6 months after which "autoscr" will be - removed. +When: Release 2009-09 + +Why: "autosrc" is an ugly and completely non-standard name. + The "autoscr" command is deprecated and will be replaced by + + the "source" command as used by other shells such as bash. + + Starting with March 2009, both commands will be supported for + a transition period of 6 months after which "autoscr" will be + removed. During the transition period existing scripts and + environment variable names remain untouched for maximum + compatibiltiy; thse will be changed when support for the + "autoscr" command get's finally dropped. + Who: Peter Tyser <ptyser@xes-inc.com> --------------------------- diff --git a/include/common.h b/include/common.h index 952ddff..20c058a 100644 --- a/include/common.h +++ b/include/common.h @@ -234,8 +234,8 @@ int mac_read_from_eeprom(void); /* common/flash.c */ void flash_perror (int); -/* common/cmd_autoscript.c */ -int autoscript (ulong addr, const char *fit_uname); +/* common/cmd_source.c */ +int source (ulong addr, const char *fit_uname); extern ulong load_addr; /* Default Load Address */ diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index db1f55c..c5e0d26 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -15,7 +15,6 @@ #define CONFIG_CMD_AMBAPP /* AMBA Plug & Play Bus print utility */ #define CONFIG_CMD_ASKENV /* ask for env variable */ -#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */ #define CONFIG_CMD_BDI /* bdinfo */ #define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */ #define CONFIG_CMD_BMP /* BMP support */ @@ -76,6 +75,7 @@ #define CONFIG_CMD_SETEXPR /* setexpr support */ #define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ #define CONFIG_CMD_SNTP /* SNTP support */ +#define CONFIG_CMD_SOURCE /* "source" command support */ #define CONFIG_CMD_SPI /* SPI utility */ #define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */ #define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */ diff --git a/include/config_cmd_default.h b/include/config_cmd_default.h index 3667602..0376e44 100644 --- a/include/config_cmd_default.h +++ b/include/config_cmd_default.h @@ -16,7 +16,6 @@ * hardware, not fully tested, etc.). */ -#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */ #define CONFIG_CMD_BDI /* bdinfo */ #define CONFIG_CMD_BOOTD /* bootd */ #define CONFIG_CMD_CONSOLE /* coninfo */ @@ -37,6 +36,7 @@ #define CONFIG_CMD_NFS /* NFS support */ #define CONFIG_CMD_RUN /* run command in env variable */ #define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ +#define CONFIG_CMD_SOURCE /* "source" command support */ #define CONFIG_CMD_XIMG /* Load part of Multi Image */ #endif /* _CONFIG_CMD_DEFAULT_H */ diff --git a/include/configs/APC405.h b/include/configs/APC405.h index 7453518..41eaaab 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -124,19 +124,19 @@ */ #include <config_cmd_default.h> +#define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP -#define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT +#define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF -#define CONFIG_CMD_DATE +#define CONFIG_CMD_FAT #define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_IRQ #define CONFIG_CMD_MII +#define CONFIG_CMD_PCI #define CONFIG_CMD_PING -#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_SOURCE #define CONFIG_CMD_USB -#define CONFIG_CMD_AUTOSCRIPT #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index 527c846..150bd29 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -74,32 +74,32 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_HUSH_PARSER 1 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_AUTOSCRIPT 1 +#define CONFIG_SOURCE 1 /* * Command line configuration. */ +#define CONFIG_CMD_ASKENV #define CONFIG_CMD_BDI -#define CONFIG_CMD_IMI -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG #define CONFIG_CMD_ECHO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMI #define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DATE #define CONFIG_CMD_RUN -#define CONFIG_CMD_I2C -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SETGETDCR +#define CONFIG_CMD_SOURCE /* diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 85c0e61..e6abbdc 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -290,14 +290,13 @@ int du440_phy_addr(int devnum); #include <config_cmd_default.h> -#define CONFIG_CMD_AUTOSCRIPT -#define CONFIG_CMD_BSP +#define CONFIG_CMD_ASKENV #define CONFIG_CMD_BMP +#define CONFIG_CMD_BSP #define CONFIG_CMD_DATE -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP -#define CONFIG_CMD_DTT #define CONFIG_CMD_DIAG +#define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF #define CONFIG_CMD_FAT @@ -309,9 +308,10 @@ int du440_phy_addr(int devnum); #define CONFIG_CMD_NFS #define CONFIG_CMD_PCI #define CONFIG_CMD_PING -#define CONFIG_CMD_USB #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SOURCE +#define CONFIG_CMD_USB #define CONFIG_SUPPORT_VFAT @@ -428,7 +428,7 @@ int du440_phy_addr(int devnum); #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif -#define CONFIG_AUTOSCRIPT 1 +#define CONFIG_SOURCE 1 #define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h index a0904d4..8941e4d 100644 --- a/include/configs/EP1C20.h +++ b/include/configs/EP1C20.h @@ -180,7 +180,6 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_BOOTD #undef CONFIG_CMD_CONSOLE #undef CONFIG_CMD_FPGA @@ -188,6 +187,7 @@ #undef CONFIG_CMD_ITEST #undef CONFIG_CMD_NFS #undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SOURCE #undef CONFIG_CMD_XIMG diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index a399d22..8f18ab2 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -152,7 +152,7 @@ /* * Set default IP stuff just to get bootstrap entries into the - * environment so that we can autoscript the full default environment. + * environment so that we can source the full default environment. */ #define CONFIG_ETHADDR 9a:52:63:15:85:25 #define CONFIG_SERVERIP 10.0.4.201 diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h index cd910ea..edbc701 100644 --- a/include/configs/MVBC_P.h +++ b/include/configs/MVBC_P.h @@ -73,8 +73,8 @@ #define MV_INITRD_LENGTH 0x00300000 #define MV_SCRATCH_ADDR 0x00000000 #define MV_SCRATCH_LENGTH MV_INITRD_LENGTH -#define MV_AUTOSCR_ADDR 0xff840000 -#define MV_AUTOSCR_ADDR2 0xff850000 +#define MV_SOURCE_ADDR 0xff840000 +#define MV_SOURCE_ADDR2 0xff850000 #define MV_DTB_ADDR 0xfffc0000 #define CONFIG_SHOW_BOOT_PROGRESS 1 @@ -130,8 +130,8 @@ #define CONFIG_RESET_TO_RETRY 1000 #define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \ - then autoscr ${autoscr_addr}; \ - else autoscr ${autoscr_addr2}; \ + then source ${autoscr_addr}; \ + else source ${autoscr_addr2}; \ fi;" #define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs" @@ -149,8 +149,8 @@ "fpga=0\0" \ "fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \ "fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \ - "autoscr_addr=" MK_STR(MV_AUTOSCR_ADDR) "\0" \ - "autoscr_addr2=" MK_STR(MV_AUTOSCR_ADDR2) "\0" \ + "autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0" \ + "autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0" \ "mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \ "mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \ "mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \ diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index b321825..8f741f5 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -412,8 +412,8 @@ #define MV_FPGA_SIZE 0x00076ca2 #define MV_KERNEL_ADDR 0xff810000 #define MV_INITRD_ADDR 0xffb00000 -#define MV_AUTOSCR_ADDR 0xff804000 -#define MV_AUTOSCR_ADDR2 0xff806000 +#define MV_SOURCE_ADDR 0xff804000 +#define MV_SOURCE_ADDR2 0xff806000 #define MV_DTB_ADDR 0xff808000 #define MV_INITRD_LENGTH 0x00400000 @@ -424,8 +424,8 @@ #define MV_INITRD_ADDR_RAM 0x01000000 #define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \ - then autoscr ${autoscr_addr}; \ - else autoscr ${autoscr_addr2}; \ + then source ${autoscr_addr}; \ + else source ${autoscr_addr2}; \ fi;" #define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs" @@ -438,8 +438,8 @@ "fpga=0\0" \ "fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \ "fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \ - "autoscr_addr=" MK_STR(MV_AUTOSCR_ADDR) "\0" \ - "autoscr_addr2=" MK_STR(MV_AUTOSCR_ADDR2) "\0" \ + "autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0" \ + "autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0" \ "mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \ "mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \ "mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \ diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h index 2d04d89..796938a 100644 --- a/include/configs/NETPHONE.h +++ b/include/configs/NETPHONE.h @@ -71,7 +71,7 @@ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ "bootm" -#define CONFIG_AUTOSCRIPT +#define CONFIG_SOURCE #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ #undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h index 4a27027..a14b2dd 100644 --- a/include/configs/NETTA2.h +++ b/include/configs/NETTA2.h @@ -71,7 +71,7 @@ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ "bootm" -#define CONFIG_AUTOSCRIPT +#define CONFIG_SOURCE #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ #undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ diff --git a/include/configs/NX823.h b/include/configs/NX823.h index 9182223..5054d5e 100644 --- a/include/configs/NX823.h +++ b/include/configs/NX823.h @@ -55,7 +55,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ #undef CONFIG_WATCHDOG /* watchdog disabled, for now */ -#define CONFIG_AUTOSCRIPT +#define CONFIG_SOURCE /* * BOOTP options @@ -72,7 +72,7 @@ */ #include <config_cmd_default.h> -#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_SOURCE /* call various generic functions */ diff --git a/include/configs/PN62.h b/include/configs/PN62.h index 06c11e6..562c5c3 100644 --- a/include/configs/PN62.h +++ b/include/configs/PN62.h @@ -59,11 +59,11 @@ #define CONFIG_CMD_PCI #define CONFIG_CMD_BSP -#undef CONFIG_CMD_AUTOSCRIPT -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SAVEENV +#undef CONFIG_CMD_SOURCE #define CONFIG_BAUDRATE 19200 /* console baudrate */ diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h index 8c2befb..b9e450d 100644 --- a/include/configs/TOP860.h +++ b/include/configs/TOP860.h @@ -125,7 +125,7 @@ #define CONFIG_CMD_BEDBUG -#define CONFIG_AUTOSCRIPT 1 +#define CONFIG_SOURCE 1 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 #undef CONFIG_LOADS_ECHO /* NO echo on for serial download */ @@ -419,15 +419,12 @@ /* * Set default IP stuff just to get bootstrap entries into the - * environment so that we can autoscript the full default environment. + * environment so that we can source the full default environment. */ #define CONFIG_ETHADDR 9a:52:63:15:85:25 #define CONFIG_SERVERIP 10.0.4.200 #define CONFIG_IPADDR 10.0.4.111 -/*----------------------------------------------------------------------- - * Defaults for Autoscript - */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ #define CONFIG_SYS_TFTP_LOADADDR 0x00100000 @@ -438,5 +435,4 @@ */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - #endif /* __CONFIG_H */ diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index d374981..fe1d102 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -253,7 +253,7 @@ #define CUSTOM_ENV_SETTINGS \ "bootfile=cam5200/uImage\0" \ "u-boot=cam5200/u-boot.bin\0" \ - "setup=tftp 200000 cam5200/setup.img; autoscr 200000\0" + "setup=tftp 200000 cam5200/setup.img; source 200000\0" #endif #if defined(CONFIG_TQM5200_B) diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h index 5f9a17f..b2d75e3 100644 --- a/include/configs/VoVPN-GW.h +++ b/include/configs/VoVPN-GW.h @@ -150,11 +150,9 @@ * Command line configuration. */ -#define CONFIG_CMD_AUTOSCRIPT #define CONFIG_CMD_BDI #define CONFIG_CMD_CONSOLE #define CONFIG_CMD_ECHO -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_IMLS @@ -164,6 +162,8 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_SOURCE /* diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 33a67ca..fa27119 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -69,11 +69,11 @@ */ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMI #undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 diff --git a/include/configs/apollon.h b/include/configs/apollon.h index 04da083..c14f871 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -127,7 +127,7 @@ #define CONFIG_MTD_PARTITIONS #endif -#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_SOURCE #ifndef CONFIG_SYS_USE_NOR # undef CONFIG_CMD_FLASH diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index 7e7f124..2ddbd17 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -91,10 +91,10 @@ */ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI #undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 1fae3a3..1a5f9a4 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -86,11 +86,11 @@ */ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMI #undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 752d7e9..4d50932 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -90,11 +90,11 @@ */ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMI #undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index dd500ca..78e0081 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -91,11 +91,11 @@ */ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMI #undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 7a4039c..a48f2cb 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -82,12 +82,12 @@ */ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMI #undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS #undef CONFIG_CMD_NET +#undef CONFIG_CMD_SOURCE #undef CONFIG_CMD_USB #define CONFIG_CMD_NAND 1 diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index c998952..4ed5514 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -117,9 +117,9 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_SPI -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SOURCE #undef CONFIG_CMD_XIMG #define CONFIG_ATMEL_USART 1 diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 2284277..b258f2d 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -142,9 +142,9 @@ #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MMC -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SOURCE #undef CONFIG_CMD_XIMG #define CONFIG_ATMEL_USART 1 diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h index 8cfa312..f93118e 100644 --- a/include/configs/atstk1006.h +++ b/include/configs/atstk1006.h @@ -142,9 +142,9 @@ #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MMC -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SOURCE #undef CONFIG_CMD_XIMG #define CONFIG_ATMEL_USART 1 diff --git a/include/configs/eNET.h b/include/configs/eNET.h index f7e6608..dde4c83 100644 --- a/include/configs/eNET.h +++ b/include/configs/eNET.h @@ -70,16 +70,15 @@ */ #include <config_cmd_default.h> -#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */ #define CONFIG_CMD_BDI /* bdinfo */ #define CONFIG_CMD_BOOTD /* bootd */ #define CONFIG_CMD_CONSOLE /* coninfo */ #define CONFIG_CMD_ECHO /* echo arguments */ -#define CONFIG_CMD_SAVEENV /* saveenv */ #define CONFIG_CMD_FLASH /* flinfo, erase, protect */ #define CONFIG_CMD_FPGA /* FPGA configuration Support */ #define CONFIG_CMD_IMI /* iminfo */ #define CONFIG_CMD_IMLS /* List all found images */ +#define CONFIG_CMD_IRQ /* IRQ Information */ #define CONFIG_CMD_ITEST /* Integer (and string) test */ #define CONFIG_CMD_LOADB /* loadb */ #define CONFIG_CMD_LOADS /* loads */ @@ -88,9 +87,10 @@ #undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_CMD_RUN /* run command in env variable */ +#define CONFIG_CMD_SAVEENV /* saveenv */ #define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ +#define CONFIG_CMD_SOURCE /* "source" command Support */ #define CONFIG_CMD_XIMG /* Load part of Multi Image */ -#define CONFIG_CMD_IRQ /* IRQ Information */ #define CONFIG_BOOTDELAY 15 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600" diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h index 21802df..739ff0d 100644 --- a/include/configs/favr-32-ezkit.h +++ b/include/configs/favr-32-ezkit.h @@ -139,9 +139,9 @@ #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MMC -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SOURCE #undef CONFIG_CMD_XIMG #define CONFIG_ATMEL_USART 1 diff --git a/include/configs/grsim.h b/include/configs/grsim.h index a9eaa4a..c3f1a31 100644 --- a/include/configs/grsim.h +++ b/include/configs/grsim.h @@ -65,23 +65,23 @@ /* * Supported commands */ -#define CONFIG_CMD_AMBAPP /* AMBA Plyg&Play information */ -#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */ -#define CONFIG_CMD_BDI /* bdinfo */ -#define CONFIG_CMD_CONSOLE /* coninfo */ +#define CONFIG_CMD_AMBAPP /* AMBA Plyg&Play information */ +#define CONFIG_CMD_BDI /* bdinfo */ +#define CONFIG_CMD_CONSOLE /* coninfo */ #define CONFIG_CMD_DIAG -#define CONFIG_CMD_ECHO /* echo arguments */ -#define CONFIG_CMD_FPGA /* FPGA configuration Support */ +#define CONFIG_CMD_ECHO /* echo arguments */ +#define CONFIG_CMD_FPGA /* FPGA configuration Support */ #define CONFIG_CMD_IRQ -#define CONFIG_CMD_ITEST /* Integer (and string) test */ -#define CONFIG_CMD_LOADB /* loadb */ -#define CONFIG_CMD_LOADS /* loads */ +#define CONFIG_CMD_ITEST /* Integer (and string) test */ +#define CONFIG_CMD_LOADB /* loadb */ +#define CONFIG_CMD_LOADS /* loads */ #define CONFIG_CMD_MISC /* Misc functions like sleep etc */ -#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_RUN /* run command in env variable */ -#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ -#define CONFIG_CMD_XIMG /* Load part of Multi Image */ +#define CONFIG_CMD_RUN /* run command in env variable */ +#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ +#define CONFIG_CMD_SOURCE /* "source" command support */ +#define CONFIG_CMD_XIMG /* Load part of Multi Image */ /* * Autobooting diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h index 58f26fd..7ebbf25 100644 --- a/include/configs/grsim_leon2.h +++ b/include/configs/grsim_leon2.h @@ -64,21 +64,21 @@ /* * Supported commands */ -#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */ -#define CONFIG_CMD_BDI /* bdinfo */ -#define CONFIG_CMD_CONSOLE /* coninfo */ +#define CONFIG_CMD_BDI /* bdinfo */ +#define CONFIG_CMD_CONSOLE /* coninfo */ #define CONFIG_CMD_DIAG -#define CONFIG_CMD_ECHO /* echo arguments */ -#define CONFIG_CMD_FPGA /* FPGA configuration Support */ +#define CONFIG_CMD_ECHO /* echo arguments */ +#define CONFIG_CMD_FPGA /* FPGA configuration Support */ #define CONFIG_CMD_IRQ -#define CONFIG_CMD_ITEST /* Integer (and string) test */ -#define CONFIG_CMD_LOADB /* loadb */ -#define CONFIG_CMD_LOADS /* loads */ +#define CONFIG_CMD_ITEST /* Integer (and string) test */ +#define CONFIG_CMD_LOADB /* loadb */ +#define CONFIG_CMD_LOADS /* loads */ #define CONFIG_CMD_MISC /* Misc functions like sleep etc */ #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_RUN /* run command in env variable */ -#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ -#define CONFIG_CMD_XIMG /* Load part of Multi Image */ +#define CONFIG_CMD_RUN /* run command in env variable */ +#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ +#define CONFIG_CMD_SOURCE /* "source" command support */ +#define CONFIG_CMD_XIMG /* Load part of Multi Image */ /* * Autobooting diff --git a/include/configs/gth2.h b/include/configs/gth2.h index b1b4842..677baea 100644 --- a/include/configs/gth2.h +++ b/include/configs/gth2.h @@ -90,18 +90,18 @@ #define CONFIG_CMD_IDE #define CONFIG_CMD_DHCP -#undef CONFIG_CMD_SAVEENV +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_ELF #undef CONFIG_CMD_FAT #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_LOADS #undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_MII #undef CONFIG_CMD_NFS -#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_SAVEENV +#undef CONFIG_CMD_SOURCE /* diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index 58b95f4..b2e37ec 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -240,7 +240,7 @@ "new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0" \ "new_esw=run set_new_esw_script; " \ "tftp ${autoscr_ws} ${new_esw_script}; " \ - "iminfo ${autoscr_ws}; autoscr ${autoscr_ws} \0" \ + "iminfo ${autoscr_ws}; source ${autoscr_ws} \0" \ "bootlimit=0 \0" \ CONFIG_KM_DEF_ENV_IOMUX \ CONFIG_KM_DEF_ENV_PRIVATE \ diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index d52a5e0..8f00773 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -93,7 +93,7 @@ * 3 = 0x3C+0x3F = F3 + F6 : enable test mode */ -#define CONFIG_BOOTCOMMAND "autoscr 40040000;saveenv" +#define CONFIG_BOOTCOMMAND "source 40040000;saveenv" /* "gatewayip=10.8.211.250\0" \ */ #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -108,7 +108,7 @@ "key_magic2=3A+3C\0" \ "key_cmd2=echo *** Entering Update Mode ***;" \ "if fatload ide 0:3 10000 update.scr;" \ - "then autoscr 10000;" \ + "then source 10000;" \ "else echo *** UPDATE FAILED ***;" \ "fi\0" \ "key_magic3=3C+3F\0" \ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 05055c8..777a4d6 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -313,7 +313,7 @@ "cp.b 200000 FFF80000 80000\0" \ "upd=run load update\0" \ "lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;" \ - "autoscr 200000\0" \ + "source 200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 9ac7e9a..edaa174 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -163,15 +163,15 @@ #else - #define CONFIG_CMD_USB #define CONFIG_CMD_CACHE + #define CONFIG_CMD_USB - #undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_BDI #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_IMI #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_MISC + #undef CONFIG_CMD_SOURCE #endif diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h index 431e669..24fa144 100644 --- a/include/configs/mx1fs2.h +++ b/include/configs/mx1fs2.h @@ -51,12 +51,12 @@ #define CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_LOADS #undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_LOADS #undef CONFIG_CMD_NET #undef CONFIG_CMD_PING -#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_SOURCE /* diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 331bf45..1803b13 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -135,7 +135,7 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 - #undef CONFIG_CMD_AUTOSCRIPT + #undef CONFIG_CMD_SOURCE #endif diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 7db1eb7..5a948e4 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -174,7 +174,7 @@ "rootfstype=jffs2\0" \ "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ - "autoscr ${loadaddr}\0" \ + "source ${loadaddr}\0" \ "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 2f532d5..8cd8a1b 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -167,7 +167,7 @@ "rootfstype=jffs2\0" \ "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ - "autoscr ${loadaddr}\0" \ + "source ${loadaddr}\0" \ "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 0c32100..51b04b6 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -161,7 +161,7 @@ "rootfstype=jffs2\0" \ "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ - "autoscr ${loadaddr}\0" \ + "source ${loadaddr}\0" \ "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index fb4e50d..40107a6 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -163,7 +163,7 @@ "rootfstype=jffs2\0" \ "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ - "autoscr ${loadaddr}\0" \ + "source ${loadaddr}\0" \ "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 883234a..c60778c 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -171,7 +171,7 @@ "rootfstype=jffs2\0" \ "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ - "autoscr ${loadaddr}\0" \ + "source ${loadaddr}\0" \ "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 5b68ef9..97e1da2 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -122,7 +122,7 @@ "rootpath=/opt/eldk/ppc_4xx\0" \ "bootfile=/tftpboot/sc3/uImage\0" \ "u-boot=/tftpboot/sc3/u-boot.bin\0" \ - "setup=tftp 200000 /tftpboot/sc3/setup.img;autoscr 200000\0" \ + "setup=tftp 200000 /tftpboot/sc3/setup.img;source 200000\0" \ "kernel_addr=FFE08000\0" \ "" #undef CONFIG_BOOTCOMMAND @@ -186,20 +186,20 @@ #include <config_cmd_default.h> -#define CONFIG_CMD_AUTOSCRIPT -#define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_NET -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_NAND -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE +#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP -#define CONFIG_CMD_CACHE #define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SOURCE #undef CONFIG_WATCHDOG /* watchdog disabled */ diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index 2f166c9..893c3d3 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -54,9 +54,9 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP -#undef CONFIG_CMD_LOADS #undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE /* diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index 5a5f772..147233d 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -68,7 +68,7 @@ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ "bootm" -#define CONFIG_AUTOSCRIPT +#define CONFIG_SOURCE #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ #undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ diff --git a/include/configs/vct.h b/include/configs/vct.h index 5371e2d..d202522 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -301,38 +301,38 @@ int vct_gpio_get(int pin); * (NOR/OneNAND) usage and Linux kernel booting. */ #if defined(CONFIG_VCT_SMALL_IMAGE) +#undef CONFIG_CMD_ASKENV +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_CACHE +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_CRC32 +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_EEPROM #undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_I2C -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_PING -#undef CONFIG_CMD_SNTP #undef CONFIG_CMD_ELF -#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_CACHE -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FAT +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_I2C #undef CONFIG_CMD_IRQ #undef CONFIG_CMD_ITEST +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADY #undef CONFIG_CMD_MII #undef CONFIG_CMD_MISC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_PING #undef CONFIG_CMD_REGINFO +#undef CONFIG_CMD_SNTP +#undef CONFIG_CMD_SOURCE #undef CONFIG_CMD_STRINGS #undef CONFIG_CMD_TERMINAL -#undef CONFIG_CMD_ASKENV -#undef CONFIG_CMD_CRC32 -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_I2C -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_LOADY -#undef CONFIG_CMD_BDI #undef CONFIG_CMD_USB -#undef CONFIG_CMD_FAT #undef CONFIG_DRIVER_SMC911X #undef CONFIG_SOFT_I2C -#undef CONFIG_AUTOSCRIPT +#undef CONFIG_SOURCE #undef CONFIG_SYS_LONGHELP #undef CONFIG_TIMESTAMP #endif /* CONFIG_VCT_SMALL_IMAGE */ diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h index 717577f..e74303d 100644 --- a/include/configs/wepep250.h +++ b/include/configs/wepep250.h @@ -49,10 +49,10 @@ */ #include <config_cmd_default.h> -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_LOADS #undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_SOURCE /* |