diff options
| -rw-r--r-- | arch/arm/cpu/armv7/ls102xa/cpu.c | 203 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-ls102xa/config.h | 14 |
2 files changed, 207 insertions, 10 deletions
diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c index ce2d92f..18665a3 100644 --- a/arch/arm/cpu/armv7/ls102xa/cpu.c +++ b/arch/arm/cpu/armv7/ls102xa/cpu.c @@ -8,6 +8,8 @@ #include <asm/arch/clock.h> #include <asm/io.h> #include <asm/arch/immap_ls102xa.h> +#include <asm/cache.h> +#include <asm/system.h> #include <tsec.h> #include <netdev.h> #include <fsl_esdhc.h> @@ -16,6 +18,197 @@ DECLARE_GLOBAL_DATA_PTR; +#ifndef CONFIG_SYS_DCACHE_OFF + +/* + * Bit[1] of the descriptor indicates the descriptor type, + * and bit[0] indicates whether the descriptor is valid. + */ +#define PMD_TYPE_TABLE 0x3 +#define PMD_TYPE_SECT 0x1 + +/* AttrIndx[2:0] */ +#define PMD_ATTRINDX(t) ((t) << 2) + +/* Section */ +#define PMD_SECT_AF (1 << 10) + +#define BLOCK_SIZE_L1 (1UL << 30) +#define BLOCK_SIZE_L2 (1UL << 21) + +/* TTBCR flags */ +#define TTBCR_EAE (1 << 31) +#define TTBCR_T0SZ(x) ((x) << 0) +#define TTBCR_T1SZ(x) ((x) << 16) +#define TTBCR_USING_TTBR0 (TTBCR_T0SZ(0) | TTBCR_T1SZ(0)) +#define TTBCR_IRGN0_NC (0 << 8) +#define TTBCR_IRGN0_WBWA (1 << 8) +#define TTBCR_IRGN0_WT (2 << 8) +#define TTBCR_IRGN0_WBNWA (3 << 8) +#define TTBCR_IRGN0_MASK (3 << 8) +#define TTBCR_ORGN0_NC (0 << 10) +#define TTBCR_ORGN0_WBWA (1 << 10) +#define TTBCR_ORGN0_WT (2 << 10) +#define TTBCR_ORGN0_WBNWA (3 << 10) +#define TTBCR_ORGN0_MASK (3 << 10) +#define TTBCR_SHARED_NON (0 << 12) +#define TTBCR_SHARED_OUTER (2 << 12) +#define TTBCR_SHARED_INNER (3 << 12) +#define TTBCR_EPD0 (0 << 7) +#define TTBCR (TTBCR_SHARED_NON | \ + TTBCR_ORGN0_NC | \ + TTBCR_IRGN0_NC | \ + TTBCR_USING_TTBR0 | \ + TTBCR_EAE) + +/* + * Memory region attributes for LPAE (defined in pgtable): + * + * n = AttrIndx[2:0] + * + * n MAIR + * UNCACHED 000 00000000 + * BUFFERABLE 001 01000100 + * DEV_WC 001 01000100 + * WRITETHROUGH 010 10101010 + * WRITEBACK 011 11101110 + * DEV_CACHED 011 11101110 + * DEV_SHARED 100 00000100 + * DEV_NONSHARED 100 00000100 + * unused 101 + * unused 110 + * WRITEALLOC 111 11111111 + */ +#define MT_MAIR0 0xeeaa4400 +#define MT_MAIR1 0xff000004 +#define MT_STRONLY_ORDER 0 +#define MT_NORMAL_NC 1 +#define MT_DEVICE_MEM 4 +#define MT_NORMAL 7 + +/* The phy_addr must be aligned to 4KB */ +static inline void set_pgtable(u32 *page_table, u32 index, u32 phy_addr) +{ + u32 value = phy_addr | PMD_TYPE_TABLE; + + page_table[2 * index] = value; + page_table[2 * index + 1] = 0; +} + +/* The phy_addr must be aligned to 4KB */ +static inline void set_pgsection(u32 *page_table, u32 index, u64 phy_addr, + u32 memory_type) +{ + u64 value; + + value = phy_addr | PMD_TYPE_SECT | PMD_SECT_AF; + value |= PMD_ATTRINDX(memory_type); + page_table[2 * index] = value & 0xFFFFFFFF; + page_table[2 * index + 1] = (value >> 32) & 0xFFFFFFFF; +} + +/* + * Start MMU after DDR is available, we create MMU table in DRAM. + * The base address of TTLB is gd->arch.tlb_addr. We use two + * levels of translation tables here to cover 40-bit address space. + * + * The TTLBs are located at PHY 2G~4G. + * + * VA mapping: + * + * ------- <---- 0GB + * | | + * | | + * |-------| <---- 0x24000000 + * |///////| ===> 192MB VA map for PCIe1 with offset 0x40_0000_0000 + * |-------| <---- 0x300000000 + * | | + * |-------| <---- 0x34000000 + * |///////| ===> 192MB VA map for PCIe2 with offset 0x48_0000_0000 + * |-------| <---- 0x40000000 + * | | + * |-------| <---- 0x80000000 DDR0 space start + * |\\\\\\\| + *.|\\\\\\\| ===> 2GB VA map for 2GB DDR0 Memory space + * |\\\\\\\| + * ------- <---- 4GB DDR0 space end + */ +static void mmu_setup(void) +{ + u32 *level0_table = (u32 *)gd->arch.tlb_addr; + u32 *level1_table = (u32 *)(gd->arch.tlb_addr + 0x1000); + u64 va_start = 0; + u32 reg; + int i; + + /* Level 0 Table 2-3 are used to map DDR */ + set_pgsection(level0_table, 3, 3 * BLOCK_SIZE_L1, MT_NORMAL); + set_pgsection(level0_table, 2, 2 * BLOCK_SIZE_L1, MT_NORMAL); + /* Level 0 Table 1 is used to map device */ + set_pgsection(level0_table, 1, 1 * BLOCK_SIZE_L1, MT_DEVICE_MEM); + /* Level 0 Table 0 is used to map device including PCIe MEM */ + set_pgtable(level0_table, 0, (u32)level1_table); + + /* Level 1 has 512 entries */ + for (i = 0; i < 512; i++) { + /* Mapping for PCIe 1 */ + if (va_start >= CONFIG_SYS_PCIE1_VIRT_ADDR && + va_start < (CONFIG_SYS_PCIE1_VIRT_ADDR + + CONFIG_SYS_PCIE_MMAP_SIZE)) + set_pgsection(level1_table, i, + CONFIG_SYS_PCIE1_PHYS_BASE + va_start, + MT_DEVICE_MEM); + /* Mapping for PCIe 2 */ + else if (va_start >= CONFIG_SYS_PCIE2_VIRT_ADDR && + va_start < (CONFIG_SYS_PCIE2_VIRT_ADDR + + CONFIG_SYS_PCIE_MMAP_SIZE)) + set_pgsection(level1_table, i, + CONFIG_SYS_PCIE2_PHYS_BASE + va_start, + MT_DEVICE_MEM); + else + set_pgsection(level1_table, i, + va_start, + MT_DEVICE_MEM); + va_start += BLOCK_SIZE_L2; + } + + asm volatile("dsb sy;isb"); + asm volatile("mcr p15, 0, %0, c2, c0, 2" /* Write RT to TTBCR */ + : : "r" (TTBCR) : "memory"); + asm volatile("mcrr p15, 0, %0, %1, c2" /* TTBR 0 */ + : : "r" ((u32)level0_table), "r" (0) : "memory"); + asm volatile("mcr p15, 0, %0, c10, c2, 0" /* write MAIR 0 */ + : : "r" (MT_MAIR0) : "memory"); + asm volatile("mcr p15, 0, %0, c10, c2, 1" /* write MAIR 1 */ + : : "r" (MT_MAIR1) : "memory"); + + /* Set the access control to all-supervisor */ + asm volatile("mcr p15, 0, %0, c3, c0, 0" + : : "r" (~0)); + + /* Enable the mmu */ + reg = get_cr(); + set_cr(reg | CR_M); +} + +/* + * This function is called from lib/board.c. It recreates MMU + * table in main memory. MMU and i/d-cache are enabled here. + */ +void enable_caches(void) +{ + /* Invalidate all TLB */ + mmu_page_table_flush(gd->arch.tlb_addr, + gd->arch.tlb_addr + gd->arch.tlb_size); + /* Set up and enable mmu */ + mmu_setup(); + + /* Invalidate & Enable d-cache */ + invalidate_dcache_all(); + set_cr(get_cr() | CR_C); +} +#endif /* #ifndef CONFIG_SYS_DCACHE_OFF */ + #if defined(CONFIG_DISPLAY_CPUINFO) int print_cpuinfo(void) { @@ -78,16 +271,6 @@ int print_cpuinfo(void) } #endif -void enable_caches(void) -{ -#ifndef CONFIG_SYS_ICACHE_OFF - icache_enable(); -#endif -#ifndef CONFIG_SYS_DCACHE_OFF - dcache_enable(); -#endif -} - #ifdef CONFIG_FSL_ESDHC int cpu_mmc_init(bd_t *bis) { diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index 7915518..cfabdc6 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -61,6 +61,20 @@ #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000) #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000) +#define CONFIG_SYS_PCIE1_PHYS_BASE 0x4000000000ULL +#define CONFIG_SYS_PCIE2_PHYS_BASE 0x4800000000ULL +#define CONFIG_SYS_PCIE1_VIRT_ADDR 0x24000000UL +#define CONFIG_SYS_PCIE2_VIRT_ADDR 0x34000000UL +#define CONFIG_SYS_PCIE_MMAP_SIZE (192 * 1024 * 1024) /* 192M */ +/* + * TLB will map VIRT_ADDR to (PHYS_BASE + VIRT_ADDR) + * So 40bit PCIe PHY addr can directly be converted to a 32bit virtual addr. + */ +#define CONFIG_SYS_PCIE1_PHYS_ADDR (CONFIG_SYS_PCIE1_PHYS_BASE + \ + CONFIG_SYS_PCIE1_VIRT_ADDR) +#define CONFIG_SYS_PCIE2_PHYS_ADDR (CONFIG_SYS_PCIE2_PHYS_BASE + \ + CONFIG_SYS_PCIE2_VIRT_ADDR) + #ifdef CONFIG_DDR_SPD #define CONFIG_SYS_FSL_DDR_BE #define CONFIG_VERY_BIG_RAM |