diff options
| -rw-r--r-- | arch/x86/Kconfig | 13 | ||||
| -rw-r--r-- | arch/x86/cpu/queensbay/Kconfig | 79 | ||||
| -rw-r--r-- | board/intel/crownbay/Kconfig | 20 |
3 files changed, 112 insertions, 0 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index fdfb618..ebf72b3 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -32,6 +32,15 @@ config TARGET_CHROMEBOOK_LINK and it provides a 2560x1700 high resolution touch-enabled LCD display. +config TARGET_CROWNBAY + bool "Support Intel Crown Bay CRB" + help + This is the Intel Crown Bay Customer Reference Board. It contains + the Intel Atom Processor E6xx populated on the COM Express module + with 1GB DDR2 soldered down memory and a carrier board with the + Intel Platform Controller Hub EG20T, other system components and + peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS. + endchoice config RAMBASE @@ -310,8 +319,12 @@ endmenu source "arch/x86/cpu/ivybridge/Kconfig" +source "arch/x86/cpu/queensbay/Kconfig" + source "board/coreboot/coreboot/Kconfig" source "board/google/chromebook_link/Kconfig" +source "board/intel/crownbay/Kconfig" + endmenu diff --git a/arch/x86/cpu/queensbay/Kconfig b/arch/x86/cpu/queensbay/Kconfig new file mode 100644 index 0000000..56fe85c --- /dev/null +++ b/arch/x86/cpu/queensbay/Kconfig @@ -0,0 +1,79 @@ +# +# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +config INTEL_QUEENSBAY + bool + select HAVE_FSP + select HAVE_CMC + +if INTEL_QUEENSBAY + +config HAVE_FSP + bool "Add an Firmware Support Package binary" + help + Select this option to add an Firmware Support Package binary to + the resulting U-Boot image. It is a binary blob which U-Boot uses + to set up SDRAM and other chipset specific initialization. + + Note: Without this binary U-Boot will not be able to set up its + SDRAM so will not boot. + +config FSP_FILE + string "Firmware Support Package binary filename" + depends on HAVE_FSP + default "fsp.bin" + help + The filename of the file to use as Firmware Support Package binary + in the board directory. + +config FSP_LOCATION + hex "Firmware Support Package binary location" + depends on HAVE_FSP + default 0xfffc0000 + help + FSP is not Position Independent Code (PIC) and the whole FSP has to + be rebased if it is placed at a location which is different from the + perferred base address specified during the FSP build. Use Intel's + Binary Configuration Tool (BCT) to do the rebase. + + The default base address of 0xfffc0000 indicates that the binary must + be located at offset 0xc0000 from the beginning of a 1MB flash device. + +config FSP_TEMP_RAM_ADDR + hex + default 0x2000000 + help + Stack top address which is used in FspInit after DRAM is ready and + CAR is disabled. + +config HAVE_CMC + bool "Add a Chipset Micro Code state machine binary" + help + Select this option to add a Chipset Micro Code state machine binary + to the resulting U-Boot image. It is a 64K data block of machine + specific code which must be put in the flash for the processor to + access when powered up before system BIOS is executed. + +config CMC_FILE + string "Chipset Micro Code state machine filename" + depends on HAVE_CMC + default "cmc.bin" + help + The filename of the file to use as Chipset Micro Code state machine + binary in the board directory. + +config CMC_LOCATION + hex "Chipset Micro Code state machine binary location" + depends on HAVE_CMC + default 0xfffb0000 + help + The location of the CMC binary is determined by a strap. It must be + put in flash at a location matching the strap-determined base address. + + The default base address of 0xfffb0000 indicates that the binary must + be located at offset 0xb0000 from the beginning of a 1MB flash device. + +endif diff --git a/board/intel/crownbay/Kconfig b/board/intel/crownbay/Kconfig new file mode 100644 index 0000000..4709f9b --- /dev/null +++ b/board/intel/crownbay/Kconfig @@ -0,0 +1,20 @@ +if TARGET_CROWNBAY + +config SYS_BOARD + default "crownbay" + +config SYS_VENDOR + default "intel" + +config SYS_SOC + default "queensbay" + +config SYS_CONFIG_NAME + default "crownbay" + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select INTEL_QUEENSBAY + select BOARD_ROMSIZE_KB_1024 + +endif |